Masoneilan ®

Specification Data

10000 Series CH2500

Control Valves 3/92

A Complete Line
of Rugged Top
and Bottom Guided
Double Ported
Globe Valves
SD CH2500 3/92
10000 Series

Table of Contents

Numbering System ................................................................ 3

General Data ......................................................................... 3
Flow Coefficients - Rated Cv ................................................................4
Ratings/Connections .............................................................. 4
Cv and FL versus Travel. ........................................................ 5
Materials of Construction ....................................................... 7
Allowable Pressure Drops ..................................................... 8-15
Dimensions ............................................................................ 16, 17
Weights .................................................................................. 18
Accessories and Options ....................................................... 19

Foreword Foreword

The 10000 Series double ported control valves are designed High Capacity with Low Recovery
to handle a wide variety of process applications. Construction Flow capacity is at top levels for contemporary double
features have been carefully selected to provide optimum ported control valves and is attained with little pressure
performance. Standard features include: recovery as indicated by its high critical flow factors.

Top and Bottom Guiding Invertible Bodies and Plugs

A well accepted industry standard particularly suited for All 10000 Series bodies and plugs are invertible, so either
double ported plugs to provide adequate support against air to open or air to close action can be obtained with the
side loads. same actuator.

High Allowable Pressure Drops The following pages provide the necessary technical
Incorporates the simplest form of balanced construction information required to specify a 10000 Series control valve
and provides high pressure drop capability with standard with Masoneilan 87 spring diaphragm actuators and 84
actuators. cylinder actuators. For additional information, contact your
local Masoneilan Representative.
Allowable pressure drop shown on all tables reflect actuator
capability for the leakage class.

Proper application requires consideration with regards to

cavitation, noise, velocity, etc. Refer to Masoneilan sizing
and noise manuals.

Trade names noted throughout are for reference only. Masoneilan

reserves the right to supply trade named material or its equivalent.
 SD CH2500 3/92
10000 Series

Numbering System
Numbering System

1st 2nd 1st 2nd 3rd 4th 5th

8 1 0 1

Control
Actuator Type Body Series Plug Type Characteristics Trim Type

87 Spring Diaphragm 10 1. Double 3. Equal 2. Down

84 Cylinder Seat Percentage Seating
6. Quick (air to close)
Opening 4. Up Seating
7. Linear (air to open)

General Data General Data

• Flow Direction • Trim

all trims: inlet between plug type: double seat, V-Port or

the ports contoured
• Body
leakage: ANSI/FCI 70.2, Class II
type: double seat globe
seat ring: threaded
• Bonnet & Blind Flange
guide: top and bottom
type: bolted
capacity: full area and 0.4
factor all sizes
• Body, Bonnet & Blind Flange
Cv ratio: 50:1
materials: carbon steel
316 stainless steel flow
chrome-molybdenum steel characteristics: equal percentage,
linear and
quick opening

• Actuators

type: spring diaphragm

handwheel: optional

type: spring return cylinder

handjack: optional
SD CH2500 3/92
10000 Series

Flow Coefficients - Rated Cv

Equal Percentage (V-Port) and Linear (Contoured)

Nominal Full Area 2 3 4 6 8 10 12 14 16

Trim Size Reduced Area 2 3 4 6 8 10 12

Orifice Upper 1.438 1.876 2.000 2.376 2.625 3.500 4.626 4.250 6.375 7.000 8.750 10.500 12.251 14.000
Dia.
(inches) Lower 1.355 1.782 1.906 2.282 2.531 3.406 4.531 5.156 6.250 6.875 8.625 10.375 12.126 13.860

Valve
Size Travel Rated CV
(inches) (inches)

2 0.8 19 48
3 1.5 44 110

4 1.5 78 195
6 2.0 180 450
8 2.5 300 750

10 2.5 460 1160

12 3.5 650 1620
14 4.0 2000q

16 4.0 2560q

q Available with equal percentage plug only.

Note: Rated Cv for quick opening valves multiply times 1.3.

Ratings/Connections

• Socket Weld Butt Weld Δ RT Joint  Threaded  RF Flanged

Valve ANSI Class

Size
(inches) 150 300 600 900 1500

2 Δ  Δ Δ • Δ • Δ •
3 - 12 Δ Δ Δ Δ Δ
1234567890123456789012345678
1234567890123456789012345678
1234567890123456789012345678
1234567890123456789012345678
14 & 16 Δ Δ Δ 1234567890123456789012345678
1234567890123456789012345678
1234567890123456789012345678
1234567890123456789012345678
1234567890123456789012345678
20 & 24    q 1234567890123456789012345678
1234567890123456789012345678
12345678901234
12345678901234
12345678901234
q ANSI Class 400 Denotes no product offering 12345678901234
 SD CH2500 3/92
10000 Series

Cv and FL Versus Travel

V-Port Trim
ANSI Class: 150 through 1500
Sizes: 2" through 16" Flow Characteristics: EQUAL PERCENTAGE
Percent of Plug Travel 10 20 30 40 50 60 70 80 90 100
Full Area .96 .96 .96 .96 .95 .94 .94 .93 .91 .90
FL
Reduced Area .96 .96 .95 .94 .93 .92 .91 .90 .89 .88
Orifice
Valve
Diameter Travel Rated Cv
Size (inches) (inches)
(inches) Upper/Lower
1.438/1.355 0.8 0.6 1.1 1.5 2.0 2.8 4.2 5.5 8.5 12.3 19
2 2.000/1.906 0.8 1.4 2.8 3.8 5.3 7.2 10.5 13.9 21.6 31.2 48
1.876/1.782 1.5 1.3 2.6 3.5 4.8 6.6 9.7 12.8 19.8 28.6 44
3 2.625/2.531 1.5 3.3 6.6 8.8 12.1 16.5 24.2 31.9 49.5 71.5 110
2.376/2.282 1.5 2.3 4.7 6.2 8.6 11.7 17.2 22.6 35.1 50.7 78
4 3.500/3.406 1.5 5.8 11.7 15.6 21.4 29.2 42.9 56.5 87.7 126 195
3.500/3.406 2.0 5 11 14 20 27 40 52 81 117 180
6 5.250/5.156 2.0 14 27 36 50 68 99 130 202 292 450
4.626/4.531 2.5 9 18 24 33 45 66 87 135 195 300
8 7.000/6.875 2.5 23 45 60 83 112 165 217 337 487 750
5.250/5.156 2.5 14 28 37 51 69 101 133 207 299 460
10 8.750/8.625 2.5 35 70 93 127 174 255 336 522 754 1160
6.375/6.250 3.5 20 39 52 72 98 143 189 293 423 650
12 10.500/10.375 3.5 49 97 130 178 243 356 469 729 1053 1620
14 12.251/12.126 4 60 120 160 220 300 440 580 900 1300 2000
16 14.000/13.860 4 77 153 207 281 384 563 742 1152 1664 2560
Contoured Trim
ANSI Class: 150 through 1500
Sizes: 2" through 12" Flow Characteristics: LINEAR
Percent of Plug Travel 10 20 30 40 50 60 70 80 90 100
FL Full Area .63 .64 .65 .70 .77 .85 .90 .90 .89 .88
Reduced Area .63 .64 .65 .70 .75 .80 .82 .82 .81 .80
Valve Orifice
Diameter Travel
Size (inches) (inches) Rated Cv
(inches) Upper/Lower
1.438/1.355 0.8 1.9 3.8 5.7 7.6 9.5 11.4 13.3 15.2 17.1 19
2 2.000/1.906 0.8 4.8 9.6 14.4 19.2 24 28.8 33.6 38.4 43.2 48
1.876/1.782 1.5 4.4 8.8 13.2 17.6 22 26.4 30.8 35.2 39.6 44
3 2.625/2.531 1.5 11 22 33 44 55 66 77 88 99 110
2.376/2.282 1.5 7.8 15.6 23.4 31.2 39 46.8 54.6 62.4 70.2 78
4 3.500/3.406 1.5 19.5 39 58.5 78 97.5 117 136 156 175 195
3.500/3.406 2.0 18 36 54 72 90 108 126 144 162 180
6 5.250/5.156 2.0 45 90 135 180 225 270 315 360 405 450
4.626/4.531 2.5 30 60 90 120 150 180 210 240 270 300
8 7.000/6.875 2.5 75 150 225 300 375 450 525 600 675 750
5.250/5.156 2.5 46 92 138 184 230 276 322 368 414 460
10 8.750/8.625 2.5 116 232 348 464 580 696 812 928 1044 1160
6.375/6.250 3.5 65 130 195 260 325 390 455 520 585 650
12 10.500/10.375 3.5 162 324 486 648 810 972 1134 1296 1458 1620
SD CH2500 3/92
10000 Series
 SD CH2500 3/92
10000 Series

Materials of Construction

Ref. Temperature Range -20''F +450''F +800''F +850''F

No. V V V V
Description Standard Materials (Optional Materials)
1 Valve Plug Stem 316 St. St. ASTM A479 TY 316
2 Packing Flange Nut 304 St. St. ASTM A194 Gr 8
3 Packing Flange Carbon Steel ASTM A668 CL B Zinc Plated
4 Packing Flange Stud 304 St. St. ASTM A193 Gr B8
5 Drive Nut SAE 1117
6 Bonnet Carbon Steel ASTM A216
7 Body 316 St. St. ASTM A351 Gr CF8M
10 Blind Flange Chrome-Moly Steel ASTM A217
8 Plug Pin 316 St. St. ASTM A479 TY 316
9 Valve Plug 316 St. St. ASTM A479 TY 316 or ASTM A351 Gr CF8M or ASTM A182 Gr F316
316 St. St. ASTM A479 TY 316 w/Hardfacing Seat and Post or Solid Stellite
11 Valve Body Stud Nuts Alloy Steel ASTM A194 Gr 2H
12 Valve Body Studs Alloy Steel ASTM A193 Gr B7
13 Valve Body Gasket 304 St. St. w/Grafoil Filler (Spiral Wound)
14 Guide Bushing 440C St. St. ASTM A276 TY 440C
Stellite No. 6 (standard with St. St. body materials)
15 Lower Seat Ring 316 St. St. ASTM A351 Gr CF8M or ASTM A182 Gr F316 or ASTM A479 TY316
16 Upper Seat Ring 316 St. St. w/Hardfacing
17 Packing Crane 285K
Braided TFE Chesterton 324
Grafoil
18 Packing Spacer 303 St. St. ASTM A582 TY 303
19 Packing Follower 303 St. St. ASTM A582 TY 303

Temperature Range -20''F +450''F +800''F +850''F

Δ Δ Δ Δ
SD CH2500 3/92
10000 Series

Allowable Pressure Drops (psig) Air To Close

Model 10132
Equal Percentage - V-Port

Flow Direction: Flow Passing into the Seats

Leakage: Per ANSI/FCI 70.2, Class II Temperature: -20''F to +850''F

Valve Bench Supply Compressible Incompressible

Travel Rated Actuator Flow Flow
Size Range Pressure
(inches) Cv Size
(inches) (psig) (psig) Closed Open Closed Open
3-15 20 640 640 640 640
6
11-23 35 2200 2200 2200 2200
48
3-15 20 1050 1050 1050 1050
10
11-23 35 3650 3650 3650 3650
2 0.8
3-15 20 1020 1020 1030 1030
6
11-23 35 3510 3510 3550 3550
19 3-15 20 1690 1690 1700 1700
10
11-23 35 3750 3750 3750 3750
3-15 20 810 810 810 680
10
11-23 35 2780 2780 2780 2440
110
3-15 20 1280 1280 1280 1100
16
11-23 35 3750 3750 3750 3750
3 1.5
3-15 20 1490 1490 1170 1170
10
11-23 35 3750 3750 3750 3750
44
3-15 20 2360 2360 1850 1850
16
11-23 35 3750 3750 3750 3750
3-15 20 610 610 610 340
10
11-23 35 2080 2080 2080 1240
195
3-15 20 970 970 970 550
16
11-23 35 3320 3320 3320 2000
4 1.5
3-15 20 920 920 930 930
10
11-23 35 3130 3130 3160 3160
78
3-15 20 1450 1450 1460 1460
16
11-23 35 3750 3750 3750 3750
3-15 20 660 570 660 220
16
11-23 35 2220 2100 2220 840
450
3-15 20 930 840 930 330
23
6 2.0 11-23 35 3170 3040 2930 2680
3-15 20 980 980 1030 1030
16
180 11-23 35 3290 3290 3460 3460
23 3-15 20 1380 1380 1460 1460

NOTE: INLET PRESSURE MUST NOT EXCEED THE ANSI RATING FOR THE SELECTED PRESSURE CLASS
 SD CH2500 3/92
10000 Series

Allowable Pressure Drops (psig) Air To Close

Model 10132
Equal Percentage - V-Port

Flow Direction: Flow Passing into the Seats

Leakage: Per ANSI/FCI 70.2, Class II Temperature: -20''F to +850''F

Valve Bench Supply Compressible Incompressible

Travel Rated Actuator Flow Flow
Size Range Pressure
(inches) Cv Size
(inches) (psig) (psig) Closed Open Closed Open
3-15 20 420 280 450 120
16
11-23 35 1350 1110 1440 470
750
3-15 20 580 430 620 180
23
8 2.5 11-23 35 1920 1620 2040 680
3-15 20 820 820 840 630
16
300 11-23 35 2630 2630 2690 2470
23 3-15 20 1140 1140 1160 950
3-15 20 390 130 420 60
16
11-23 35 1150 640 1240 280
1160
3-15 20 520 220 570 90
23
10 2.5 11-23 35 1610 950 1740 410
3-15 20 830 830 850 380
16
460 11-23 35 2430 2430 2480 1800
23 3-15 20 1110 1110 1140 630
10-47 55 510 370 570 130
154
1620 25-40 55 440 440 490 360
12 3.5 314 10-47 55 920 840 1040 290
10-47 55 1060 1060 1060 990
650 154
25-40 55 920 920 920 920
10-36 45 460 240 530 70
154
14 4.0 2000 25-42 55 730 730 840 220
314 10-36 45 820 590 930 180
10-36 45 380 160 440 40
154
16 4.0 2560 25-42 55 590 520 680 150
314 10-36 45 660 410 760 120

NOTE: INLET PRESSURE MUST NOT EXCEED THE ANSI RATING FOR THE SELECTED PRESSURE CLASS
SD CH2500 3/92
10000 Series

Allowable Pressure Drops (psig) Air To Close

Models 10162 and 10172

Linear and Quick Opening

Flow Direction: Flow Passing into the Seats

Leakage: Per ANSI/FCI 70.2, Class II Temperature: -20''F to +850''F

Valve Bench Supply Compressible Incompressible

Travel Rated Actuator Flow Flow
Size Range Pressure
(inches) Cv Size
(inches) (psig) (psig) Closed Open Closed Open
3-15 20 640 640 640 360
6
11-23 35 2200 2200 2190 1310
48
3-15 20 1050 1050 1050 610
10
11-23 35 3650 3650 3640 2190
2 0.8
3-15 20 1030 1030 1020 1020
6
11-23 35 3550 3550 3490 3490
19
3-15 20 1700 1700 1610 1610
10
11-23 35 3750 3750 3750 3750
3-15 20 810 680 810 310
10
11-23 35 2780 2440 2780 1110
110
3-15 20 1280 1100 1280 500
16
11-23 35 3750 3750 3750 1790
3 1.5
3-15 20 1170 1170 1150 1150
10
11-23 35 3750 3750 3750 3750
44
3-15 20 1850 1850 1820 1820
16
11-23 35 3750 3750 3750 3750
3-15 20 610 340 610 160
10
11-23 35 2080 1240 2080 580
195
3-15 20 970 550 970 260
16
11-23 35 3320 2000 3320 940
4 1.5
3-15 20 930 930 910 910
10
11-23 35 3160 3160 3090 3090
78
3-15 20 1460 1460 1430 1430
16
11-23 35 3750 3750 3750 3750
3-15 20 660 220 660 100
16
11-23 35 2220 840 2220 390
450
3-15 20 930 330 930 150
23
6 2.0 11-23 35 2930 2680 3170 570
3-15 20 1030 1030 1000 730
16
180 11-23 35 3460 3460 3350 2710
23 3-15 20 1460 1460 1410 1080

NOTE: INLET PRESSURE MUST NOT EXCEED THE ANSI RATING FOR THE SELECTED PRESSURE CLASS
 SD CH2500 3/92
10000 Series

Allowable Pressure Drops (psig) Air To Close

Models 10162 and 10172

Linear and Quick Opening

Flow Direction: Flow Passing into the Seats

Leakage: Per ANSI/FCI 70.2, Class II Temperature: -20''F to +850''F

Valve Bench Supply Compressible Incompressible

Travel Rated Actuator Flow Flow
Size Range Pressure
(inches) Cv Size
(inches) (psig) (psig) Closed Open Closed Open
3-15 20 450 120 400 50
16
11-23 35 1440 470 1280 220
750
3-15 20 620 180 550 80
23
8 2.5 11-23 35 2040 680 1820 330
3-15 20 840 630 810 390
16
300 11-23 35 2690 2470 2580 1540
23 3-15 20 1160 950 1120 590
3-15 20 420 60 370 20
16
11-23 35 1240 280 1070 130
1160
3-15 20 570 90 490 40
23
10 2.5 11-23 35 1740 410 1500 200
3-15 20 850 380 820 230
16
460 11-23 35 2480 1800 2380 1100
23 3-15 20 1140 630 1090 390
10-47 55 570 130 430 70
154
1620 25-40 55 490 360 370 210
12 3.5 314 10-47 55 1040 290 770 170
10-47 55 1060 990 1000 610
650 154
25-40 55 920 920 860 860
10-36 45 530 70 340 40
154
14 4.0 2000 25-42 55 840 220 540 140
314 10-36 45 930 180 600 110
10-36 45 440 40 250 30
154
16 4.0 2560 25-42 55 680 150 390 100
314 10-36 45 760 120 435 80

NOTE: INLET PRESSURE MUST NOT EXCEED THE ANSI RATING FOR THE SELECTED PRESSURE CLASS
SD CH2500 3/92
10000 Series

Allowable Pressure Drops (psig) Air To Close

Model 10134
Equal Percentage - V-Port

Flow Direction: Flow Passing into the Seats

Leakage: Per ANSI/FCI 70.2, Class II Temperature: -20''F to +850''F

Valve Bench Supply Compressible Incompressible

Travel Rated Actuator Flow Flow
Size Range Pressure
(inches) Cv Size
(inches) (psig) (psig) Closed Open Closed Open
6-30 35 800 800 800 790
6
11-23 35 1740 1740 1740 1740
48
6-30 35 1360 2200 1360 1310
10
11-23 35 2920 2920 2920 2920
2 0.8
6-30 35 1300 1300 1300 1300
6
11-23 35 2800 2800 2810 2810
19
6-30 35 2180 2180 2200 2200
10
11-23 35 3750 3750 3750 3750
6-30 35 1020 1020 1020 820
10
11-23 35 2210 2210 2210 2030
110
6-30 35 1650 1650 1650 1300
16
11-23 35 3550 3550 3550 3240
3 1.5
6-30 35 1460 1460 1470 1470
10
11-23 35 3140 3140 3160 3160
44
6-30 35 2350 2350 2370 2370
16
11-23 35 3750 3750 3750 3750
6-30 35 750 750 750 500
10
11-23 35 1630 1630 1630 1240
195
6-30 35 1220 1540 1220 790
16
11-23 35 2630 2630 2630 1970
4 1.5
6-30 35 1120 1120 1130 1130
10
11-23 35 2440 2440 2460 2460
78
6-30 35 1820 1820 1840 1840
16
11-23 35 3750 3750 3750 3750
6-30 35 780 680 780 340
16
11-23 35 1720 1660 1720 840
450
6-30 35 1150 960 1150 490
23
6 2.0 11-23 35 2490 2380 2490 1210
6-30 35 1210 1210 1230 1230
16
180 11-23 35 2640 2640 2680 2680
23 6-30 35 1760 1760 1790 1790

NOTE: INLET PRESSURE MUST NOT EXCEED THE ANSI RATING FOR THE SELECTED PRESSURE CLASS
 SD CH2500 3/92
10000 Series

Allowable Pressure Drops (psig) Air To Close

Model 10134
Equal Percentage - V-Port

Flow Direction: Flow Passing into the Seats

Leakage: Per ANSI/FCI 70.2, Class II Temperature: -20''F to +850''F

Valve Bench Supply Compressible Incompressible

Travel Rated Actuator Flow Flow
Size Range Pressure
(inches) Cv Size
(inches) (psig) (psig) Closed Open Closed Open
6-30 35 440 460 470 220
16
11-23 35 1000 1000 1060 530
750
6-30 35 650 640 700 310
23
8 2.5 11-23 35 1460 1460 1550 760
6-30 35 870 870 870 870
16
300 11-23 35 1960 1960 1980 1980
23 6-30 35 1290 1290 1300 1300
6-30 35 300 330 330 160
16
11-23 35 760 760 820 360
1160
6-30 35 480 460 520 220
23
10 2.5 11-23 35 1130 1070 1220 510
6-30 35 650 650 660 660
16
460 11-23 35 1600 1600 1640 1640
23 6-30 35 1020 1020 1040 1040
10-47 55 440 350 500 120
154
1620 25-40 55 1490 310 1680 110
12 3.5 314 10-47 55 1020 660 1160 230
10-47 55 930 930 930 930
650 154
25-40 55 3130 1340 3130 850

NOTE: INLET PRESSURE MUST NOT EXCEED THE ANSI RATING FOR THE SELECTED PRESSURE CLASS
SD CH2500 3/92
10000 Series

Allowable Pressure Drops (psig) Air To Close

Models 10164 and 10174

Linear and Quick Opening

Flow Direction: Flow Passing into the Seats

Leakage: Per ANSI/FCI 70.2, Class II Temperature: -20''F to +850''F

Valve Bench Supply Compressible Incompressible

Travel Rated Actuator Flow Flow
Size Range Pressure
(inches) Cv Size
(inches) (psig) (psig) Closed Open Closed Open
6-30 35 800 790 800 450
6
11-23 35 1740 1740 1740 1120
48
6-30 35 1360 1310 1360 750
10
11-23 35 2920 2920 2920 1870
2 0.8
6-30 35 1300 1300 1280 1280
6
11-23 35 2810 2810 2760 2760
19
6-30 35 2200 2200 2160 2160
10
11-23 35 3750 3750 3750 3750
6-30 35 1020 820 1020 450
10
11-23 35 2210 2030 2210 1120
110
6-30 35 1650 1300 1650 720
16
11-23 35 3550 3240 3550 1790
3 1.5
6-30 35 1470 1470 1440 1440
10
11-23 35 3160 3160 3110 3110
44
6-30 35 2370 2370 2330 2330
16
11-23 35 3750 3750 3750 3750
6-30 35 750 500 750 260
10
11-23 35 1630 1240 1630 640
195
6-30 35 1220 790 1220 410
16
11-23 35 2630 1970 2630 1020
4 1.5
6-30 35 1130 1130 1110 1110
10
11-23 35 2460 2460 2410 2410
78
6-30 35 1840 1840 1800 1800
16
11-23 35 3750 3750 3750 3750
6-30 35 780 340 780 180
16
11-23 35 1720 840 1720 440
450
6-30 35 1150 490 1150 250
23
6 2.0 11-23 35 2490 1210 2490 630
6-30 35 1230 1230 1190 910
16
180 11-23 35 2680 2680 2600 2220
23 6-30 35 1790 1790 1740 1290

NOTE: INLET PRESSURE MUST NOT EXCEED THE ANSI RATING FOR THE SELECTED PRESSURE CLASS
 SD CH2500 3/92
10000 Series

Allowable Pressure Drops (psig) Air To Close

Models 10164 and 10174

Linear and Quick Opening

Flow Direction: Flow Passing into the Seats

Leakage: Per ANSI/FCI 70.2, Class II Temperature: -20''F to +850''F

Valve Bench Supply Compressible Incompressible

Travel Rated Actuator Flow Flow
Size Range Pressure
(inches) Cv Size
(inches) (psig) (psig) Closed Open Closed Open
6-30 35 470 220 410 110
16
11-23 35 1060 530 940 270
750
6-30 35 700 310 620 160
23
8 2.5 11-23 35 1550 760 1380 390
6-30 35 870 870 840 580
16
300 11-23 35 1980 1980 1900 1390
23 6-30 35 1300 1300 1250 820
6-30 35 330 160 280 80
16
11-23 35 820 360 710 180
1160
6-30 35 520 220 450 110
23
10 2.5 11-23 35 1220 510 1060 260
6-30 35 660 660 640 520
16
460 11-23 35 1640 1640 1590 1180
23 6-30 35 1040 1040 1010 710
10-47 55 500 120 370 80
154
1620 25-40 55 1680 110 1260 70
12 3.5 314 10-47 55 1160 230 860 150
10-47 55 930 930 930 550
650 154
25-40 55 3130 850 3130 490

NOTE: INLET PRESSURE MUST NOT EXCEED THE ANSI RATING FOR THE SELECTED PRESSURE CLASS
SD CH2500 3/92
10000 Series

Dimensions (inches)

Flanged Ends Socket Weld

or Threaded Ends

Body S/A
ANSI Class
Valve 150-600
150 300 600
Size Butt Weld or
(in.) Socket Weld RF RTJ RF RTJ RF RTJ
A D A D A D A D A D A D A D
2 9.25 4.12 10.00 4.62 10.50 4.88 10.50 4.88 11.12 5.19 11.25 5.25 11.38 5.31
3 13.25 6.25 11.75 5.50 12.25 5.75 12.50 5.88 13.12 6.19 13.25 6.25 13.38 6.31
4 15.50 7.38 13.88 6.56 14.38 6.81 14.50 6.88 15.12 7.19 15.50 7.38 15.62 7.44
6 20.00 8.75 17.75 7.62 18.25 7.88 18.62 8.06 19.25 8.38 20.00 8.75 20.12 8.81
8 24.00 9.88 21.38 8.56 21.88 8.81 22.38 9.06 23.00 9.38 24.00 9.88 24.12 9.94
10 27.75 11.50 24.62 9.94 25.12 10.19 26.00 10.62 26.62 10.94 27.75 11.50 27.88 11.56
12 32.00 12.88 28.75 11.25 29.25 11.50 30.25 12.00 30.88 12.31 32.00 12.88 32.12 12.94
14 36.75 14.62 33.50 13.00 34.00 13.25 35.00 13.75 35.62 14.06 36.75 14.62 36.88 14.68
16 38.63 17.25 35.38 15.69 35.88 15.94 36.88 16.50 37.50 16.81 38.63 17.25 38.75 17.31

ANSI Class 150-1500

ANSI Class
Valve B C
Valve 900 & 1500 Size (Max) (Max)
900 1500
Size Butt Weld or (inches)
(in.) RF RTJ RF RTJ Socket Weld
2 6.0 7.2
A D A D A D A D A D 3 7.8 9.3
2 12.25 5.88 12.38 5.94 12.25 5.88 12.38 5.94 12.25 5.88 4 8.1 9.5
3 15.25 7.12 15.38 7.19 16.00 7.50 16.12 7.56 16.00 7.50 6 11.2 12.6
4 18.25 8.62 18.38 8.69 19.00 9.00 19.12 9.06 19.00 9.00 8 13.4 14.7
6 20.88 9.44 21.00 9.50 24.00 11.00 24.25 11.12 24.00 11.00 10 14.8 16.4
12 17.8 19.8
8 27.88 12.75 28.00 12.81 30.12 13.88 30.50 14.06 30.12 13.88
14 q 21.5 24.1
10 32.62 15.12 32.75 15.19 35.62 16.62 36.00 16.81 35.62 16.62
q
12 35.25 15.62 35.38 15.69 40.38 17.69 41.00 18.00 40.38 17.69 16 22.3 26.1
q ANSI 150-600 only
 SD CH2500 3/92
10000 Series

Dimensions (inches)

Shown with optional handwheel

Model 87 Actuator
Actuator
E F G H
Size
6 11.50 15.54 10.00 9.00
10 14.50 19.58 10.90 12.00
16 18.75 28.22 13.00 18.00
23 21.63 30.71 15.00 18.00
Actuator removal clearance = 6 inches

Shown with optional handjack

Model 84 Actuator

Actuator Size K L M N
154 (sq. in.) 18.1 47.8 60.5 26.7
314 (sq. in.) 23.9 49.8 62.5 27.0
SD CH2500 3/92
10000 Series

Weights (lbs)

Body S/A
Socket, Flanged
Valve Butt Weld &
Size Threaded Ends ANSI ANSI ANSI ANSI ANSI
(inches) up to 600 lbs. 150 300 600 900 1500
2 50 150 160 175 297 297
3 110 245 255 270 397 408
4 192 305 310 335 492 505
6 364 515 530 595 892 910
8 669 800 825 960 1440 1460
10 1168 1350 1380 1500 2250 2250
12 1452 1700 1740 1900 2850 2850

Model 87 Spring Diaphragm Actuator

Size
(in.) Standard w/Handwheel

6 45 60
10 85 105
16 210 245
23 265 340

Model 84 Cylinder Actuator

Size Base Small Medium Large

(sq. in.) Weight Spring Spring Spring Handjack

154 266 60 --- 82 100

314 709 60 84 142 100
 SD CH2500 3/92
10000 Series

Notes
BELGIUM INDIA
Dresser Valves Europe Dresser Valve India Pvt. Ltd.
Boulevard du Souverain 207 B2 Vorstlaan, 305/306, "Midas", Sahar Plaza

Sales Office
B-1160 Brussels, Belgium Mathurdas Vasanji Road
Phone: +32-2-344-0970 J.B. Nagar, Andheri East
Fax: +32-2-344-1123 Mumbai, 400059, India

BRAZIL
Dresser Industria E Comercio Ltda
Phone:
Fax:
+91-22-8381134
+91-22-8354791 Locations
Divisao Masoneilan Dresser Valve India Pvt. Ltd.
Rua Senador Vergueiro, 433 205, Mohta Building
09521-320 Sao Caetano Do Sul 4 Bhikaiji Cama Place
Sao Paolo, Brazil New Delhi, 110 066, India
Phone: 55-11-453-5511 Phone: +91-11-6164175
Fax: 55-11-453-5565 Fax: +91-11-6165074 NIGERIA UNITED KINGDOM
Dresser Flow Solutions DI U.K. Ltd.
CANADA ITALY Plot 293, Akin Olugbade Street East Gillibrands
Alberta Dresser Italia S.r.l. Victoria Island, Lagos, Nigeria Skelmersdale,
Dresser - Masoneilan Masoneilan Operations Phone: +234-1-555-4229 Lancashire WN8 9TU, England
DI Canada, Inc. Via Cassano, 77 Fax: +234-1-555-7969 Phone: +44-1695-52600
Suite 1300, 311-6th Ave., S.W. 80020 Casavatore, Napoli Italy Fax: +44-1695-50569
Calgary, Alberta T2P 3H2, Canada Phone: +39-081-7892-111 RUSSIA
Phone: 403-290-0001 Fax: +39-081-7892-208 DS Controls DI U.K. Ltd.
Fax: 403-290-1526 Nekhinskaya Street, 61 Unit 4, Suite 1.1, Nobel House
JAPAN Veliky Novgorod Grand Union Office Park
Ontario Niigata Masoneilan Co. Ltd. (NIMCO) Russia, 173021 Packet Boat Lane
Dresser - Masoneilan 20th Floor, Marive East Tower Phone: +7-8162-11-3099 Uxbridge, Middlesex UB8 2GH
DI Canada, Inc. WBG 2-6 Nakase, Mihama-ku, Fax: +7-8162-11-2981 Phone: +44-1895-454-900
835 Harrington Court, 2nd Floor Chiba-shi, Chiba 261-7120 Japan Fax: +44-1895-454-917
Burlington, Ontario L7N 3P3, Canada Phone: +81-43-297-9222 SAUDI ARABIA
Phone: 905-335-3529 Fax: +81-43-299-1115 Dresser AL Rushaid UNITED STATES
Fax: 905-336-7628 Valve & Instrument Co., Ltd. (Darvico) Dresser - Masoneilan
KOREA P.O. Box 10145 85 Bodwell Street
CHINA Dresser Korea Inc. Jubail Industrial City 31961, Saudi Arabia Avon, MA 02322-1190
Dresser Flow Control, Beijing Rep. Office 2015 Kuk Dong Building 60-1 Phone: +966-3-341-0278 Phone: 508-586-4600
Suite 2403, Capital Mansion 3-Ka, Choongmu-ro Chung-Ku Fax: +966-3-341-7624 Fax: 508-427-8971
6 Xinyuannan Rd. Chaoyang District Seoul, Korea
Beijing 100004, China Phone: +82-2-2274-0792 SINGAPORE Dresser - Masoneilan
Phone: +86-10-8486-5272 Fax: +82-2-2274-0794 Dresser Singapore PTE Ltd. 4841 Leopard Street
Fax: +86-10-8486-5305 16 Tuas Avenue 8 Corpus Christi, TX 78408-2621
KUWAIT Singapore 639231 Phone: 361-877-2414
FRANCE Dresser Flow Solutions Phone: +65-6-861-6100 Fax: 361-584-1196
Dresser Produits Industriels S.A.S. Middle East Operations Fax: +65-6-861-7197
4, place de Saverne 10th Floor, Al Rashed Complex Dresser - Masoneilan
92971 Paris La Défense Cedex, France Fahad Salem Street, P.O. Box 242 SOUTH AFRICA Dresser Direct
Phone: +33-1-4904-9000 Safat, 13003, Kuwait Dresser Limited 1250 Hall Court
Fax: +33-1-4904-9010 Phone: +965-9061157 P.O. Box 2234 Deer Park, TX 77536
Fax: +965-3718590 16 Edendale Road Phone: 281-884-1000
Dresser Produits Industriels S.A.S., Eastleigh, Edenvale 1610 Fax: 281-884-1010
Masoneilan Customer Service Centre MALAYSIA Republic of South Africa
55 rue de la Mouche, Zone Industrielle Dresser Flow Solutions Phone: +27-11-452-1550 Dresser - Masoneilan
69540 Irigny, France Business Suite, 19A-9-1, Level 9 Fax: +27-11-452-6542 16250 Port Northwest Drive
Phone: +33-4-72-39-06-29 UOA Centre, No. 19, Jalan Pinang Houston, TX 77041
Fax: +33-4-72-39-21-93 50450 Kuala Lumpur, West Malaysia SPAIN Phone: 832-590-2300
Phone: +60-3-2163-2322 Masoneilan S.A. Fax: 832-590-2529
GERMANY Fax: +60-3-2161-1362 C/Murcia 39 C
Dresser Valves Europe GmbH 08830 Sant Boi de Llobregat Dresser - Masoneilan
Heiligenstrasse 75 MEXICO Barcelona, Spain 2950 East Birch Street
Viersen D-41751, Germany Dresser Valve de Mexico, S.A. de C.V. Phone: +34-93-652-6430 Brea, CA 92821
Phone: +49-2162-8170-0 Henry Ford No. 114, Esq. Fulton Fax: +34-93-661-3450 Phone: 714-572-1528
Fax: +49-2162-8170-280 Fraccionamiento Industrial San Nicolas Fax: 714-572-1463
54030 Tlalnepantla Estado de Mexico UNITED ARAB EMIRATES
Dresser Valves Europe GmbH Phone: 52-5-310-9863 Dresser Flow Solutions
Uhlandstrasse 58 Fax: 52-5-310-5584 Middle East Operations
60314 Frankfurt, Germany P.O. Box 61302
Phone: +49-69-439350 THE NETHERLANDS Roundabout 8
Fax: +49-69-4970802 Dresser Valves Europe Units JA01 & JA02
Steenhouwerstraat 11 Jebel Ali Free Zone
3194 AG Hoogvliet, The Netherlands Dubai, U. A. E.
Phone: +31-10-438-4122 Phone: +971-4-8838-752
Fax: +31-10-438-4443 Fax: +971-4-8838-038

LaVigne Inc. Job #28286, 12/04 3M CH2500 SD - 3/92

Copyright 2004 Dresser, Inc. All rights reserved. 10000 Series Control Valves