112

T5822_aSpoonfulofSugar_02_Projects.indd 112 12/23/15 9:55 AM

 Prey Panda Snap Purse MATERIALS (for 1 pouch)

Fat eighth of cotton fabric for pouch exterior

Fat eighth of white homespun for pouch lining

DIFFICULTY Fat eighth of fusible fleece

««« Scrap of gingham fabric, at least
6" × 4" (15.2cm × 10.2cm), for ears
FINISHED SIZE Scrap of black fabric, at least 2½" × 4"
5½" × 4½" (14cm × 11.4cm), excluding ears (6.4cm × 10.2cm), for outer eyes
Scrap of white fabric, at least 1½" × 3"
(3.8cm × 7.6cm), for inner eyes
Pandas are universally popular. Children will love this
Scrap of black fabric, at least 1½" × 1"
cute pouch, which features a darling appliquéd panda (3.8cm × 2.5cm), for nose
and a handy snap closure.
Scrap of black fabric, at least 5" × 8"
(12.7cm × 20.3cm), for the casing
2 black sequins
Black embroidery thread
4½" × ½" (11.4cm × 1.3cm) flex frame

TOOLS & SUPPLIES

Basic sewing tools (see Tools and Materials)

Cardboard
Spray starch
Embroidery needle
Long-nose pliers

TEMPLATES

Pouch, Outer Eyes, Inner Eyes,

Nose, and Ears (on CD)

113

T5822_aSpoonfulofSugar_02_Projects.indd 113 12/23/15 9:55 AM

 Note: Seam allowances are ¼" (6mm) wide unless APPLIQUÉ POUCH
otherwise indicated.
1 Fuse the fleece onto the back of the exterior pouch
CUTTING AND PREPARING FABRICS pieces, ensuring all edges are aligned.
Using the Pouch template, cut 2 Position the Outer Eye cardboard template onto the
back of the corresponding fabric piece so it's centered.
• 2 pieces from the white printed fabric for the
Moisten the edges of the fabric with spray starch. Using
pouch exterior
your iron, press the seam allowance of the eye over the
• 2 pieces from the white homespun for the
cardboard. Work your way around the outside of the
pouch lining
eye with the iron, pressing the seam allowance over
• 2 pieces from the fusible fleece
the cardboard so it's flat. Repeat for the remaining
From the black print fabric, cut four 5" × 2" outer eye.
(12.7cm × 5.1cm) strips for the casing.
3 Using the same technique as described in step 2,
prepare the inner eye pieces and the nose.
Using the Ear template, cut 4 pieces from the black
gingham. 4 Referring to the photograph of the pouch for place-
ment, position the nose and eye pieces on the pouch
Trace the Inner Eye, Outer Eye, and Nose shapes exterior and pin to secure. Hand-stitch the outer eyes,
onto cardboard and cut them out. These cardboard inner eyes and nose in position. Stitch a sequin to both
shapes will be used to appliqué the facial features. inner eyes, as shown in the photograph. Using black
embroidery thread, stitch the mouth in place below
Using the Outer Eye cardboard shape as a template, the nose, using an outline stitch.
cut out 2 outer eyes from black print fabric. Add a
¼" (6mm) seam allowance around the outside of the
5 Pin 2 ear pieces together with the right sides facing.
Stitch around the outside of the ear. Clip curves and
template.
turn the ear right-side out. Press the ear. Repeat
to construct the other ear. Using the photograph of the
Using the Inner Eye cardboard shape as a template,
panda, position the ears on each side approximately ½"
cut out 2 inner eyes from white print fabric. Add a
(1.3cm) down from the top edge so the raw edges are
¼" (6mm) seam allowance around the outside of the
aligned and the ears are folded over the eyes (Figure 1).
template.

Using the Nose shape cardboard as a template, cut

out 1 nose from black print fabric. Add a ¼" (6mm)
seam allowance around the outside of the template.

C42: close
up photo
of panda face

Figure 1

114

T5822_aSpoonfulofSugar_02_Projects.indd 114 12/23/15 9:55 AM

 ASSEMBLE THE POUCH
6 Pin the front and back of the pouch together with
the right sides facing and all the edges aligned. Stitch
the sides and bottom of the pouch together, leaving
the top edge open. Clip the curves, turn the pouch
right-side out and press. Pin both pieces of the lining
together and stitch them in the same manner, leaving
a 4" (10.2cm) gap at the bottom of the pouch for
turning. Clip the curves and press.
7 To make the casing for the pouch, place 2 of the
rectangles together with right sides facing. Pin and
stitch along the short edges. Turn the piece right-side
out and press. Fold the rectangle in half lengthwise and
press. Repeat with the 2 remaining casing rectangles.
8 Pin one of the casing strips to the top edge of the
pouch front so that it's centered and the raw edges
are aligned. Baste in place with an 1⁄8" (3mm) seam
allowance. Baste the remaining casing strip to the back
of the pouch in the same way.
9 Place the exterior of the pouch inside the lining
so the right sides are facing. Pin the lining to the
pouch exterior around the top opening. Stitch around
the opening. Turn the pouch right-side out through the
gap in the lining. Stitch the gap in the lining closed
using a slipstitch. Press.
10 Carefully slide one prong of the snap frame through
one casing, and the other prong through the remaining
casing. Following manufacturer's instructions, insert
the pin in place at the open end of the frame to secure.
You will need long-nose pliers to close the snap frame.

TIP
You can purchase purse flex frames (also
known as purse snap frames) from Etsy
or check with your local fabric shop.

115

T5822_aSpoonfulofSugar_02_Projects.indd 115 12/23/15 9:55 AM