Interpon

Anticorrosion
Systems

SELECTION GUIDE FOR STEEL

The long term corrosion protection of an item depends on many Working constraints
factors. The initial design, the choice of anticorrosion system, the If the coated parts could be
production techniques, the ongoing maintenance scheme and the subject to specific require-
operating environment will all have an effect on the performance ments such as contact with
throughout the in-service life. chemical products, silkscreen
printing, exposure to specific
The correct selection and good application of the coating system
temperatures, resistance to
play a vital role in providing the appropriate corrosion protection
specific mechanical stresses,
to give long term performance. AkzoNobel Powder Coatings offers
government controlled uses
a range of different high performance anticorrosion coating systems
(contact with food), such uses
combined with detailed and rigorous application guidelines.
must be the subject of specific
Our expertise is at your disposal, so don’t hesitate to take advice
recommendations.
from our technical specialists.

THE CHOICE OF A SUITABLE

ANTICORROSION SYSTEM
An anticorrosive powder coating system is defined by:

- the surface pre-treatment of the pieces to be coated

- the powder coating product or products

- the coating system specification ie number of coats,

film thickness and application conditions

Selection of the most appropriate system can be made by following

these steps.

Post-forming operations after coating

Any kind of parts which will be submitted to post-forming operations

1 Anticipate key factors like folding, stamping, boring should have been pre-treated in a way
to provide a very good adhesion of the powder coating.
Type of substrate
However, to get the best anticorrosion protection it is highly
For instance, a low viscosity primer could be useful to give a better
recommended to reduce the post-forming operations to the
surface to an irregular cast.
minimum.
Type of environment
For instance in an environment with high humidity & condensation a
system with a good barrier protection would be recommended.

Expected durability of anticorrosion protection 2 Select a protection technique

Shop fittings are periodically changed so a standard anticorrosion
protection is sufficient. Whereas an item exposed to harsh weather Barrier effect protection
and located in an inaccessible area requires high anticorrosion This technology aims to isolate steel from its environment by
protection covering it with a water and airtight cover such as enamel, paint,
plastic coating, etc. It is called a barrier protection. The barrier
Type of part - geometry, mass, quantity
protection works well as long as there is no defect in the
Heavy parts cannot generally be pre-treated by chemical
protecting layer.
pre-treatment: a mechanical pre-treatment is then necessary.
On the other hand the chemical pre-treatment is more adapted Cathodic protection
to parts showing crevices. This technology consists of putting the steel in contact with a less
noble metal which will oxidize preferentially to iron. Iron is less easily
The chemical pre-treatment is also better adapted for large
oxidized than zinc and can be protected by it. Zinc brings a cathodic
quantity treatments even if the automatic grit blasting allows
protection to iron by an electrochemical effect.
large volume treatments.
Steel passivation protection
With paints or powder coatings, it is possible to delay the corrosion
creep under the coating by the use of inhibiting pigments which can
passivate the steel substrate.

These pigments, depending on their nature, can build a passivating

layer slowing down the reaction with the water-oxygen mixture or
can neutralize the acid ions caused by humidity.

The effectiveness of these corrosion inhibiting pigments varies

considerably depending on the coating chemistry and the
formulating technique used.

Duplex system protection

When a zinc or zinc rich covering is overcoated with paint or powder
coating, it is called a duplex system.

This two layer system combines cathodic protection provided by the

zinc and an impermeable barrier protection provided by the coating.
<<

Diagram of the Duplex System protection

3 Match it with our Interpon System

To aid selection the following tables present:

- The recommended Interpon anticorrosive systems

depending on the category of the corrosive environment
and on some generic pre-treatment types

- The additional characteristics of the different proposed

systems.

This selection guide, based on the experience of AkzoNobel Powder

Coatings, is given as information only. Please consult us for advice
on your specific needs.

>> By Corrosivity category

The following tables are split by environment types exterior / interior.
They are built using the corrosivity categories of ISO 12944-2.
The anticorrosion systems presented are based on the different
protection techniques.

Steel passivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Active Protective Primer Interpon APP 120 + topcoat

Barrier effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Barrier Protective Primer Interpon BPP 330 + topcoat

Duplex system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Zinc rich primer Interpon PZ + topcoat

(cathodic protection + barrier effect)

Reinforced Duplex System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 layer system Interpon PZ + Interpon BPP 330 + topcoat
(cathodic protection + high barrier protection)
 Selection guide of Interpon steel anticorrosion
Corrosivity categories of the environment ISO 12944

Exterior atmosphere
C2 C3 C4 C5-I C5-M

Pieces exposure Corrosivity Corrosivity Corrosivity Corrosivity Corrosivity

Low Middle High Very High Very High
Industrial Marine

Rural zones Urban, Industrial / Industrial/coastal area Industrial Coastal/offshores area

Low level of coastal area moderate salinity high high salinity
pollution moderated pollution / humidity
low salinity /aggressive

Amorphous
Posphating Amorphous
or Phosphating with
Chemical Amorphous Passivation
treatments Phosphating with or Cristalline Zn-Ni
Surface Passivation Cristalline Zn-Ni Cristalline Zn-Ni Phosphating
treatments with Passivation Specific Phosphating with
or Phosphating with study, Passivation
Cristalline Zn-Ni Passivation consult us
Phosphating with
Passivation
Or Or Or
Note 1 Mechanical Grit blasting Grit blasting Grit blasting Grit blasting
treatments Ra 6 - 12 µ Ra 6 - 12 µ Ra 6 - 12 µ Ra 6 - 12 µ
SA ≥ 2,5 SA ≥ 2,5 SA ≥ 2,5 SA 3

Depending on the environment :

Interpon 610, TC 2 layer system : 2 layer system :
or Interpon APP120
Interpon D1036 Interpon APP120 or
or or Interpon BPP330
Interpon D1094 Interpon BPP330 (mini 60µ)
(mini 60µ) (mini 60µ) +
On + Interpon 610, TC
chemical Interpon 610, TC or
treatments or Interpon D1036 or D1094
Interpon D1036 or (mini 70µ)
D1094 Note 4
(min. 70µ) Specific study,
Or consult us
3 layer system :
Interpon PZ 770
(min. 60µ)
+
Interpon BPP330
(min. 60µ)
+
Interpon D1036 or D1094 Specific
Coatings (min. 70µ) study,
Note 3 Note 3 consult us
Note 3

Depending on the environment :

With a durability
2 layer system : depending on
2 layer system : 2 layer system : Interpon PZ 770 the elements design,
(min. 60µ) use and maintenance :
Interpon PZ 660 or Interpon PZ 660 or +
770 770 3 layer system :
Interpon D1036 or D1094
(min. 60µ) (min. 60µ) (min. 70µ)
+ + Interpon PZ 770
On Note 4
Interpon 610, TC Interpon 610, TC (min. 60µ)
mechanical or Or
or +
treatments Interpon D1036 or Interpon D1036 or 3 layer system : Interpon BPP330
D1094 D1094 (min. 60µ)
Interpon PZ 770
(min. 70µ) (min. 70µ) +
(min. 60µ)
+ Interpon D1036 or
Interpon BPP330 D1094
(min. 60µ) (min. 70µ)
+
Interpon D1036 or D1094
(min. 70µ)

Note 3 Note 3 Note 3 Note 3

Note 1 : for cast iron, in some cases, a degassing operation and a surfacer primer application could be recommended
Note 2 : some Interpon 310 or Interpon 700 finishes containing metal pigments can not be used in humid environments
Note 3 : high durability powder coatings are also available, Interpon 810 for industrial uses and Interpon D2525 for
Note 4 : only for pieces located over 500 meters from a coast or an aggressive atmosphere
 Corrosivity categories of the environment ISO 12944

Interior ambiance
C1 C2 C3 C4 C5

Pieces exposure Corrosivity Corrosivity Corrosivity Corrosivity Corrosivity

Very low Low Middle High Very High
Heated building, Not heated Production room,
clean atmosphere building, possible high humidity and Building/area
office, stores, condensation air pollution Chemical Plants, Swimming
pool costal ship, boatyard Condensation,
school Warehouse, Food ind.,
high pollution
Sporthall laundries, dairies

Amorphous Amorphous
Phosphating Phosphating Amorphous
or or Phosphating Cristalline Zn-Ni Phosphating
Amorphous Amorphous with Passivation with Passivation

Surface Chemical Phosphating with Phosphating with or

treatments treatments Passivation Passivation Cristalline Zn-Ni
or or Phosphating with
Cristalline Zn-Ni Cristalline Zn-Ni Passivation
Phosphating with Phosphating with
Passivation Passivation Specific study,
consult us
Or Or
Note 1
Mechanical Grit blasting Grit blasting Grit blasting Grit blasting
treatments Ra 6 - 12 µ Ra 6 - 12 µ Ra 6 - 12 µ Ra 6 - 12 µ
SA ≥ 2,5 SA ≥ 2,5 SA ≥ 2,5 SA ≥ 2,5

Interpon 700 Interpon 700 2 layer system : 3 layer system :

or or
Interpon 310 Interpon 310 Interpon APP120 Interpon PZ 770
or or or (mini 60µ)
Interpon 610 Interpon 610 Interpon BPP330 +
or or (mini 60µ) Interpon BPP330
Interpon D1036 Interpon D1036 + (mini 60µ)
On or or Interpon 700 +
chemical Interpon D1094 Interpon D1094 or Interpon 700
treatments (mini 60µ) (mini 60µ) Interpon 610, TC or
or Interpon 610, TC
Interpon D1036 or
or D1094 Interpon D1036 or D1094
(mini 60µ) (mini 60µ)

Note 2 Note 2 Note 2

Coatings Specific study,
consult us

Interpon 700 Interpon 700 2 layer system : 3 layer system :

or or
Interpon PZ 660 Interpon PZ 770
Interpon 310 Interpon 310
or 770 (mini 60µ)
or or
(mini 60µ) +
Interpon 610 Interpon 610
+ Interpon BPP330
or or
Interpon 700 (mini 60µ)
Interpon D1036 Interpon D1036
or +
or or
Interpon 610, TC Interpon 700
Interpon D1094 Interpon D1094
On or or
(mini 60µ) (mini 60µ)
mechanical Interpon D1036 Interpon 610, TC
treatments or D1094 or
(mini 60µ) Interpon D1036 or D1094
(mini 60µ)

Note 2 Note 2 Note 2

Note 1 : for cast iron, in some cases, a degassing operation and a surfacer primer application could be recommended
Note 2 : some Interpon 310 or Interpon 700 finishes containing metal pigments could not be used in humid environment
Note 3 : high durability powder coatings are also available, Interpon 810 for industrial uses and Interpon D2525 for
 << Chemical pretreatment

Mechanical pretreatment >>

>> By additional characteristics

Regarding the primer choice some additional characteristics of the primer should be taken in account such as its application conditions,
its overcoatability with a liquid paint etc.

The following table provides some of this information which should be completed by consulting the primer technical documentation.

Additional characteristics of the systems

Primer Type Hollow Edge Primers - Powder Powder Topcoat Overcoatability Use as Safety
bodies coverage colours spraying recycling flow with liquid holding Label
penetration power availability easiness easiness quality paints primer

Yes, with a
maximum
Interpon Powder Yes Yes : waiting
Free
APP 120 Epoxy- PU 1K or 2K delay of
polyester 6 weeks

Yes, with a
Interpon Powder Grey Yes : maximum
Free
BPP 330 Pure Epoxy PU 1K or 2K waiting
delay of
1 week

Interpon Powder Yes : No Xi Irritant

PZ 660 Zinc rich Zinc grey PU 1K or 2K N-Dangerous
Epoxy for the
environment

Xi Irritant
Interpon Powder Yes : No
N-Dangerous
PZ 770 Zinc rich Zinc grey PU 1K or 2K
for the
Epoxy
environment
OUR ANTICORROSION SYSTEMS
IN DETAIL
>> Interpon APP 120 system
This two layer system consists of an active protective primer Interpon
APP 120 overcoated with a polyester topcoat or a hybrid topcoat
for interior exposure. It is dedicated to steel protection with a surface
pre-treatment obtained by grit blasting or phosphating with
passivation. Interpon APP 120 is an epoxy polyester primer including
active anticorrosive pigments which provide a passivating effect to
protect the substrate. This primer has also been formulated to
provide the best adhesion of the topcoat, powder or liquid. Interpon
<<

Hellbergs’ boat doors protected by Interpon APP 120

APP 120 can be formulated in different colours to corespond with
the topcoat colour. This hybrid primer can also be used as a holding
primer but never as a durable single coat.

 Good performance with phosphating with passivation

>> Interpon BPP 330 system

This two layer system is made of a barrier protective primer
Zinc free anticorrosive primer
Interpon BPP 330 overcoated with a polyester topcoat or a hybrid
 High finish quality due to good flow of primer topcoat for interior exposure. It is dedicated to steel protection with
 Good protection of the part’s edges a surface pre-treatment obtained by grit blasting or phosphating.
Interpon BPP 330 is a pure epoxy primer providing excellent barrier
 Holding primer for a powder / liquid topcoat protection. This is made possible by formulating techniques to
(maximum overcoating time of 6 weeks and a achieve a high level of cross-linking in the polymer matrix together
preliminary cleaning) with the incorporation of barrier effect agents. This combination
 Easy and flexible application with precise guidelines significantly enhances the performance when compared with other
systems such as normal epoxy primers. It is available in grey and
 Possibility to have a similar colour to the topcoat colour satin.

 Very good anticorrosion in particular with a phosphating

with passivation

 Very good flow

 Zinc free anticorrosive primer

 High finish quality system due to good flow of primer

 Easy spraying

 Possibility to use it also as a barrier primer on hot dip

galvanised steel.

<< Veles e Ventes - Valencia Spain

Protected by a 3 layer system: Interpon PZ 770 / Interpon BPP 300
/ Top coat.
>> Interpon PZ system
This duplex technology system combines cathodic protection and
barrier effect. It consists of a two layer system with a zinc rich primer
- Interpon PZ 660 or Interpon PZ 770 - overcoated with a polyester
topcoat or a hybrid topcoat for interior exposure.

Dedicated to steel protection with a surface pre-treatment obtained

by grit blasting or phosphating with passivation, the Interpon PZ
formulation is patented by AkzoNobel. It is made of an epoxy resin,
including 50% of zinc; dust and in particular lamellate to improve
conductivity. Interpon PZ 770 includes a specific anticorrosive
function which improves the protection in case of scratch.
Both Interpon PZ products have a grey zinc colour.

 High anticorrosion protection especially with grit blasting

 Interpon PZ 770 is certified by ACQPA - (N° C4A NV 572)

and approved by SNCF ( French railways ) according to the
NF F 19-478 specification

 Good finish quality (no irregular and porous surface)

 Economical zinc powder primer /m2 (density 2,0)

 Strict application specification

 Approved applicators network


<<

Possibility to apply a PU 2K liquid topcoat on the Interpon PZ Various Industrial parts protected by Interpon PZ system.
primer (maximum application delay of 12 hours) and if required
a third antigraffiti powder layer.

>> 3 layer system

The Interpon PZ + Interpon BPP 330 system is used in highly
corrosive environments. This 3 layer system consists of a zinc rich
primer Interpon PZ 770, a barrier protective primer Interpon BPP
330 and a polyester topcoat / hybrid topcoat for interior

It is mainly intended for steel protection with a surface pre-treatment

obtained by grit blasting or crystalline Zn-Ni phosphating with
passivation.

The system combines the benefits of cathodic protection

(Interpon PZ) and the high barrier effect (Interpon BPP 330)

<< Protected by a 3 layer system

THE CHOICE OF PERFORMANCE
AND AESTHETIC
Interpon anticorrosive primers have many years anticorrosion track
record performance, throughout Europe.

Interpon primers are used in a wide range of applications:

- Architectural metalwork
- Balustrades
- Fencing
- Structural steelwork
- Truck trailers and chassis
- Gas-tanks and bottles

Through the wide range of finishes – Collection Futura, Elements, Fiji

and Ral “Metallic”, AkzoNobel Powder Coatings also bring a high
aesthetic appearance to the coated pieces. This is further preserved
with the Interpon anticorrosion systems.

When used with one of the wide range of AkzoNobel finishes –

Collection Futura, Elements, Fiji and RAL “Metallic” – coated pieces
can have a combined highly protective and aesthetic finish.
ARGENTINA NEW ZEALAND The information given in this brochure is not intended to be
+54 (11) 4709 3109/3118 +64 (0) 9 828 3009 exhaustive and any person using the product for any
purpose other than that specifically recommended in this
AUSTRALIA NORWAY
+61 (0) 3 9313 4555 +47 66 819 500 brochure, without first obtaining written confirmation from us
as to the suitability of the product for the intended purpose,
BALTICS POLAND does so at his own risk.
(Latvia, Lithuania, Estonia) +48 12 651 81 91
+371 293 7557 Whilst we endeavour to ensure that all advice we give about
PORTUGAL
BENELUX +35 2121 99100
the product (whether in this brochure or otherwise) is correct,
+32 (0) 2 255 2260 we have no control over either the quality or condition of
ROMANIA the substrate or the many factors affecting the use and
BRAZIL +40 21 3232 314 application of the product. Therefore, unless we specifically
+55 (11) 218 49700
RUSSIA agree in writing to do so, we do not accept any liability
CHINA +7 495 411 7350 whatsoever or howsoever arising from the performance of
Suzhou the product or for any loss or damage (other than death or
+86 (0) 512 6825 7828 SINGAPORE
personal injury resulting from our negligence) arising from
Ningbo +65 6890 6900
+86 (0) 574 883 28301 the use of the product. The information contained in this
Shenzhen SLOVAK REPUBLIC brochure is liable to modification from time to time in light of
+86 (0) 755 2714 8450 +421 415 640612 experience and our policy of continuous product
Langfang
development.
+86 (0) 316 5919 519 SOUTH AFRICA
Chengdu +27 (0) 11 907 8195
+86 (0) 288 4847 402
SOUTH KOREA
CZECH REPUBLIC +82 (0) 31 432 1100
+420 553 692 255 Lucoat
+82 (0) 31 312 3042
DENMARK
+45 44 66 44 44 SPAIN
+34 (9) 3 680 6900
EGYPT
+202 833 1415 SWEDEN
+46 (0) 31 928 500
FINLAND
+358 (0) 20 7501 501 TAIWAN
+866 (0) 2 2603 5700
FRANCE
+33 (0) 160 81 81 81 TURKEY
+90 232 252 2700
GERMANY
Bensheim UNITED ARAB EMIRATES
+49 (0) 6251 13060 +971 4886 2181
All products supplied & technical
Reutlingen
advice given are subject to the
+49 (0) 7121 5190 UK
standard terms of sale of the
+44 (0) 191 469 6111
AkzoNobel supplying company.
GREECE Copyright ©2008 Akzo Nobel
+30 210 8160 160 UNITED STATES Powder Coatings Ltd. Interpon
Cleveland is a registered trademark of
HUNGARY +1 (216) 750 6475 AkzoNobel.
+36 1 348 0646 Nashville (Issue 1 - 7/2008).
+1 (615) 259 2430 Printed in the UK.
INDIA Brecksville
+91 80 228 95000 +1 (216) 750 6001
Troy
INDONESIA +1 (248) 526 2660
+62 (0) 21 893 4270 Vernon
+1 (323) 585 7577
ITALY
+39 031 345 111 UKRAINE
+3 8 044 537 5455
MALAYSIA
+60 7 254 1102 VIETNAM
+84 61 356 0730
Interpon ®

MEXICO
+52 (818) 374 3244