1

INTRODUCTION

SQL is divided into the following

 Data Definition Language (DDL)

 Data Manipulation Language (DML)
 Data Retrieval Language (DRL)
 Transaction Control Language (TCL)
 Data Control Language (DCL)

DDL -- create, alter, drop, truncate, rename

DML -- insert, update, delete
DRL -- select
TCL -- commit, rollback, savepoint
DCL -- grant, revoke

CREATE TABLE SYNTAX

Create table <table_name> (col1 datatype1, col2 datatype2 …coln datatypen);
Ex: SQL> create table student (no number (2), name varchar (10), marks number (3));

INSERT
This will be used to insert the records into table.
We have two methods to insert.
 By value method
 By address method

a) USING VALUE METHOD

Syntax:
insert into <table_name) values (value1, value2, value3 …. Valuen);
Ex:
SQL> insert into student values (1, ’sudha’, 100);
SQL> insert into student values (2, ’saketh’, 200);

To insert a new record again you have to type entire insert command, if there are lot of
records this will be difficult.
This will be avoided by using address method.

© Copy rights are reserved.

 2
b) USING ADDRESS METHOD

Syntax:
insert into <table_name) values (&col1, &col2, &col3 …. &coln);
This will prompt you for the values but for every insert you have to use forward slash.
Ex:
SQL> insert into student values (&no, '&name', &marks);
Enter value for no: 1
Enter value for name: Jagan
Enter value for marks: 300
old 1: insert into student values(&no, '&name', &marks)
new 1: insert into student values(1, 'Jagan', 300)

SQL> /
Enter value for no: 2
Enter value for name: Naren
Enter value for marks: 400
old 1: insert into student values(&no, '&name', &marks)
new 1: insert into student values(2, 'Naren', 400)

c) INSERTING DATA INTO SPECIFIED COLUMNS USING VALUE METHOD

Syntax:
insert into <table_name)(col1, col2, … Coln) values (value1, value2, …. Valuen);
Ex:
SQL> insert into student (no, name) values (3, ’Ramesh’);
SQL> insert into student (no, name) values (4, ’Madhu’);

d) INSERTING DATA INTO SPECIFIED COLUMNS USING ADDRESS METHOD

Syntax:
insert into <table_name)(col1, col2, col3 … coln) values (&col1, &col2 ….&coln);
This will prompt you for the values but for every insert you have to use forward slash.
Ex:
SQL> insert into student (no, name) values (&no, '&name');
Enter value for no: 5
Enter value for name: Visu
old 1: insert into student (no, name) values(&no, '&name')
new 1: insert into student (no, name) values(5, 'Visu')
© Copy rights are reserved.
 3
SQL> /
Enter value for no: 6
Enter value for name: Rattu
old 1: insert into student (no, name) values(&no, '&name')
new 1: insert into student (no, name) values(6, 'Rattu')

SELECTING DATA
Syntax:
Select * from <table_name>; -- here * indicates all columns
or
Select col1, col2, … coln from <table_name>;
Ex:
SQL> select * from student;
NO NAME MARKS
--- ------ --------
1 Sudha 100
2 Saketh 200
1 Jagan 300
2 Naren 400
3 Ramesh
4 Madhu
5 Visu
6 Rattu

SQL> select no, name, marks from student;

NO NAME MARKS
--- ------ --------
1 Sudha 100
2 Saketh 200
1 Jagan 300
2 Naren 400
3 Ramesh
4 Madhu
5 Visu
6 Rattu

SQL> select no, name from student;

© Copy rights are reserved.
 4

NO NAME
--- -------
1 Sudha
2 Saketh
1 Jagan
2 Naren
3 Ramesh
4 Madhu
5 Visu
6 Rattu

CONDITIONAL SELECTIONS AND OPERATORS

We have two clauses used in this

 Where
 Order by
USING WHERE
Syntax:
select * from <table_name> where <condition>;
the following are the different types of operators used in where clause.
 Arithmetic operators
 Comparison operators
 Logical operators

 Arithmetic operators -- highest precedence

+, -, *, /
 Comparison operators
 =, !=, >, <, >=, <=, <>
 between, not between
 in, not in
 null, not null
 like
 Logical operators
 And
 Or -- lowest precedence
 not

© Copy rights are reserved.

 5

a) USING =, >, <, >=, <=, !=, <>

Ex:
SQL> select * from student where no = 2;
NO NAME MARKS
--- ------- ---------
2 Saketh 200
2 Naren 400
SQL> select * from student where no < 2;
NO NAME MARKS
--- ------- ----------
1 Sudha 100
1 Jagan 300
SQL> select * from student where no > 2;
NO NAME MARKS
--- ------- ----------
3 Ramesh
4 Madhu
5 Visu
6 Rattu
SQL> select * from student where no <= 2;
NO NAME MARKS
--- ------- ----------
1 Sudha 100
2 Saketh 200
1 Jagan 300
2 Naren 400
SQL> select * from student where no >= 2;
NO NAME MARKS
--- ------- ---------
2 Saketh 200
2 Naren 400
3 Ramesh
4 Madhu
5 Visu
6 Rattu

© Copy rights are reserved.

 6
SQL> select * from student where no != 2;
NO NAME MARKS
--- ------- ----------
1 Sudha 100
1 Jagan 300
3 Ramesh
4 Madhu
5 Visu
6 Rattu
SQL> select * from student where no <> 2;
NO NAME MARKS
--- ------- ----------
1 Sudha 100
1 Jagan 300
3 Ramesh
4 Madhu
5 Visu
6 Rattu
b) USING AND

This will gives the output when all the conditions become true.
Syntax:
select * from <table_name> where <condition1> and <condition2> and ..
<conditionn>;
Ex:
SQL> select * from student where no = 2 and marks >= 200;
NO NAME MARKS
--- ------- --------
2 Saketh 200
2 Naren 400
c) USING OR

This will gives the output when either of the conditions become true.
Syntax:
select * from <table_name> where <condition1> and <condition2> or ..
<conditionn>;
Ex:
SQL> select * from student where no = 2 or marks >= 200;
NO NAME MARKS
--- ------- ---------
© Copy rights are reserved.
 7
2 Saketh 200
1 Jagan 300
2 Naren 400

d) USING BETWEEN

This will gives the output based on the column and its lower bound, upperbound.
Syntax:
select * from <table_name> where <col> between <lower bound> and <upper
bound>;
Ex: SQL> select * from student where marks between 200 and 400;
NO NAME MARKS
--- ------- ---------
2 Saketh 200
1 Jagan 300
2 Naren 400
e) USING NOT BETWEEN

This will gives the output based on the column which values are not in its lower bound,
upperbound.
Syntax:
select * from <table_name> where <col> not between <lower bound> and <upper
bound>;
Ex: SQL> select * from student where marks not between 200 and 400;
NO NAME MARKS
--- ------- ---------
1 Sudha 100
f) USING IN

This will gives the output based on the column and its list of values specified.
Syntax:
select * from <table_name> where <col> in ( value1, value2, value3 … valuen);
Ex: SQL> select * from student where no in (1, 2, 3);
NO NAME MARKS
--- ------- ---------
1 Sudha 100
2 Saketh 200
1 Jagan 300
2 Naren 400
3 Ramesh
© Copy rights are reserved.
 8

g) USING NOT IN

This will gives the output based on the column which values are not in the list of
values specified.
Syntax:
select * from <table_name> where <col> not in ( value1, value2, value3 … valuen);
Ex: SQL> select * from student where no not in (1, 2, 3);
NO NAME MARKS
--- ------- ---------
4 Madhu
5 Visu
6 Rattu
h) USING NULL

This will gives the output based on the null values in the specified column.
Syntax:
select * from <table_name> where <col> is null;
Ex: SQL> select * from student where marks is null;
NO NAME MARKS
--- ------- ---------
3 Ramesh
4 Madhu
5 Visu
6 Rattu
i) USING NOT NULL

This will gives the output based on the not null values in the specified column.
Syntax:
select * from <table_name> where <col> is not null;
Ex: SQL> select * from student where marks is not null;
NO NAME MARKS
--- ------- ---------
1 Sudha 100
2 Saketh 200
1 Jagan 300
2 Naren 400

j) USING LIKE

This will be used to search through the rows of database column based on the pattern
you specify.
© Copy rights are reserved.
 9
Syntax:
select * from <table_name> where <col> like <pattern>;
Ex:
i) This will give the rows whose marks are 100.
SQL> select * from student where marks like 100;
NO NAME MARKS
--- ------- ---------
1 Sudha 100
ii) This will give the rows whose name start with ‘S’.
SQL> select * from student where name like 'S%';
NO NAME MARKS
--- ------- ---------
1 Sudha 100
2 Saketh 200
iii) This will give the rows whose name ends with ‘h’.
SQL> select * from student where name like '%h';
NO NAME MARKS
--- ------- ---------
2 Saketh 200
3 Ramesh
iV) This will give the rows whose name’s second letter start with ‘a’.
SQL> select * from student where name like '_a%';
NO NAME MARKS
--- ------- --------
2 Saketh 200
1 Jagan 300
2 Naren 400
3 Ramesh
4 Madhu
6 Rattu
V) This will give the rows whose name’s third letter start with ‘d’.
SQL> select * from student where name like '__d%';
NO NAME MARKS
--- ------- ---------
1 Sudha 100
4 Madhu

© Copy rights are reserved.

 10
Vi) This will give the rows whose name’s second letter start with ‘t’ from ending.
SQL> select * from student where name like '%_t%';
NO NAME MARKS
--- ------- ---------
2 Saketh 200
6 Rattu
Vii) This will give the rows whose name’s third letter start with ‘e’ from ending.
SQL> select * from student where name like '%e__%';
NO NAME MARKS
--- ------- ---------
2 Saketh 200
3 Ramesh
Viii) This will give the rows whose name cotains 2 a’s.
SQL> select * from student where name like '%a% a %';
NO NAME MARKS
--- ------- ----------
1 Jagan 300

* You have to specify the patterns in like using underscore ( _ ).

USING ORDER BY
This will be used to ordering the columns data (ascending or descending).
Syntax:
Select * from <table_name> order by <col> desc;
By default oracle will use ascending order.
If you want output in descending order you have to use desc keyword after the column.
Ex: SQL> select * from student order by no;
NO NAME MARKS
--- ------- ---------
1 Sudha 100
1 Jagan 300
2 Saketh 200
2 Naren 400
3 Ramesh
4 Madhu
5 Visu
6 Rattu

© Copy rights are reserved.

 11
SQL> select * from student order by no desc;
NO NAME MARKS
--- ------- ---------
6 Rattu
5 Visu
4 Madhu
3 Ramesh
2 Saketh 200
2 Naren 400
1 Sudha 100
1 Jagan 300

USING DML

USING UPDATE
This can be used to modify the table data.
Syntax:
Update <table_name> set <col1> = value1, <col2> = value2 where <condition>;
Ex: SQL> update student set marks = 500;
If you are not specifying any condition this will update entire table.
SQL> update student set marks = 500 where no = 2;
SQL> update student set marks = 500, name = 'Venu' where no = 1;

USING DELETE
This can be used to delete the table data temporarily.
Syntax:
Delete <table_name> where <condition>;
Ex: SQL> delete student;
If you are not specifying any condition this will delete entire table.
SQL> delete student where no = 2;

USING DDL

USING ALTER
This can be used to add or remove columns and to modify the precision of the datatype.
a) ADDING COLUMN

Syntax:
alter table <table_name> add <col datatype>;
© Copy rights are reserved.
 12
Ex: SQL> alter table student add sdob date;
b) REMOVING COLUMN

Syntax:
alter table <table_name> drop <col datatype>;
Ex: SQL> alter table student drop column sdob;
c) INCREASING OR DECREASING PRECISION OF A COLUMN

Syntax:
alter table <table_name> modify <col datatype>;
Ex: SQL> alter table student modify marks number(5);

* To decrease precision the column should be empty.

d) MAKING COLUMN UNUSED

Syntax:
alter table <table_name> set unused column <col>;
Ex: SQL> alter table student set unused column marks;
Even though the column is unused still it will occupy memory.
d) DROPPING UNUSED COLUMNS

Syntax:
alter table <table_name> drop unused columns;
Ex: SQL> alter table student drop unused columns;
* You can not drop individual unused columns of a table.
e) RENAMING COLUMN

Syntax:
alter table <table_name> rename column <old_col_name> to <new_col_name>;
Ex: SQL> alter table student rename column marks to smarks;

USING TRUNCATE
This can be used to delete the entire table data permanently.
Syntax:
truncate table <table_name>;
Ex: SQL> truncate table student;

USING DROP
This will be used to drop the database object;
Syntax:
Drop table <table_name>;
Ex: SQL> drop table student;

© Copy rights are reserved.

 13
USING RENAME
This will be used to rename the database object;
Syntax:
rename <old_table_name> to <new_table_name>;
Ex: SQL> rename student to stud;

USING TCL

USING COMMIT

This will be used to save the work.

Commit is of two types.
 Implicit
 Explicit

a) IMPLICIT

This will be issued by oracle internally in two situations.

 When any DDL operation is performed.
 When you are exiting from SQL * PLUS.

b) EXPLICIT

This will be issued by the user.

Syntax:
Commit or commit work;
* When ever you committed then the transaction was completed.

USING ROLLBACK
This will undo the operation.
This will be applied in two methods.
 Upto previous commit
 Upto previous rollback

© Copy rights are reserved.

 14
Syntax:
Roll or roll work;
Or
Rollback or rollback work;
* While process is going on, if suddenly power goes then oracle will rollback the transaction.

USING SAVEPOINT
You can use savepoints to rollback portions of your current set of transactions.
Syntax:
Savepoint <savepoint_name>;
Ex:
SQL> savepoint s1;
SQL> insert into student values(1, ‘a’, 100);
SQL> savepoint s2;
SQL> insert into student values(2, ‘b’, 200);
SQL> savepoint s3;
SQL> insert into student values(3, ‘c’, 300);
SQL> savepoint s4;
SQL> insert into student values(4, ‘d’, 400);
Before rollback
SQL> select * from student;
NO NAME MARKS
--- ------- ----------
1 a 100
2 b 200
3 c 300
4 d 400

SQL> rollback to savepoint s3;

Or
SQL> rollback to s3;
This will rollback last two records.
SQL> select * from student;
NO NAME MARKS
--- ------- ----------
1 a 100
2 b 200

© Copy rights are reserved.

 15

USING DCL

DCL commands are used to granting and revoking the permissions.

USING GRANT

This is used to grant the privileges to other users.

Syntax: Grant <privileges> on <object_name> to <user_name> [with grant option];
Ex:
SQL> grant select on student to sudha; -- you can give individual privilege
SQL> grant select, insert on student to sudha; -- you can give set of privileges
SQL> grant all on student to sudha; -- you can give all privileges
The sudha user has to use dot method to access the object.
SQL> select * from saketh.student;
The sudha user can not grant permission on student table to other users. To get this
type of option use the following.
SQL> grant all on student to sudha with grant option;
Now sudha user also grant permissions on student table.

USING REVOKE
This is used to revoke the privileges from the users to which you granted the privileges.
Syntax: Revoke <privileges> on <object_name> from <user_name>;
Ex:
SQL> revoke select on student form sudha; -- you can revoke individual privilege
SQL> revoke select, insert on student from sudha; -- you can revoke set of privileges
SQL> revoke all on student from sudha; -- you can revoke all privileges

USING ALIASES

CREATE WITH SELECT

We can create a table using existing table [along with data].

Syntax:
Create table <new_table_name> [col1, col2, col3 ... coln] as select * from
<old_table_name>;
Ex: SQL> create table student1 as select * from student;
Creating table with your own column names.
SQL> create table student2(sno, sname, smarks) as select * from student;
© Copy rights are reserved.
 16
Creating table with specified columns.
SQL> create table student3 as select no,name from student;
Creating table with out table data.
SQL> create table student2(sno, sname, smarks) as select * from student where 1 = 2;
In the above where clause give any condition which does not satisfy.

INSERT WITH SELECT

Using this we can insert existing table data to a another table in a single trip. But the table
structure should be same.
Syntax: Insert into <table1> select * from <table2>;
Ex: SQL> insert into student1 select * from student;
Inserting data into specified columns
SQL> insert into student1(no, name) select no, name from student;

COLUMN ALIASES
Syntax:
Select <orginal_col> <alias_name> from <table_name>;
Ex:
SQL> select no sno from student;
or
SQL> select no “sno” from student;

TABLE ALIASES
If you are using table aliases you can use dot method to the columns.
Syntax:
Select <alias_name>.<col1>, <alias_name>.<col2> … <alias_name>.<coln> from
<table_name> <alias_name>;
Ex: SQL> select s.no, s.name from student s;

USING MERGE

MERGE

You can use merge command to perform insert and update in a single command.

Ex:

SQL> Merge into student1 s1

Using (select *From student2) s2

© Copy rights are reserved.

 17
On(s1.no=s2.no)
When matched then
Update set marks = s2.marks
When not matched then
Insert (s1.no,s1.name,s1.marks)
Values(s2.no,s2.name,s2.marks);

In the above the two tables are with the same structure but we can merge different structured
tables also but the datatype of the columns should match.
Assume that student1 has columns like no,name,marks and student2 has columns like no,
name, hno, city.
SQL> Merge into student1 s1
Using (select *From student2) s2
On(s1.no=s2.no)
When matched then
Update set marks = s2.hno
When not matched then
Insert (s1.no,s1.name,s1.marks)
Values(s2.no,s2.name,s2.hno);

MULTIBLE INSERTS

We have table called DEPT with the following columns and data
DEPTNO DNAME LOC
-------- -------- ----
10 accounting new york
20 research dallas
30 sales Chicago
40 operations boston

a) CREATE STUDENT TABLE

SQL> Create table student(no number(2),name varchar(2),marks number(3));

b) MULTI INSERT WITH ALL FIELDS

SQL> Insert all

Into student values(1,’a’,100)
Into student values(2,’b’,200)
Into student values(3,’c’,300)

© Copy rights are reserved.

 18
Select *from dept where deptno=10;
-- This inserts 3 rows

c) MULTI INSERT WITH SPECIFIED FIELDS

SQL> insert all

Into student (no,name) values(4,’d’)
Into student(name,marks) values(’e’,400)
Into student values(3,’c’,300)
Select *from dept where deptno=10;
-- This inserts 3 rows
d) MULTI INSERT WITH DUPLICATE ROWS

SQL> insert all

Into student values(1,’a’,100)
Into student values(2,’b’,200)
Into student values(3,’c’,300)
Select *from dept where deptno > 10;
-- This inserts 9 rows because in the select statement retrieves 3 records (3 inserts for
each row retrieved)
e) MULTI INSERT WITH CONDITIONS BASED

SQL> Insert all

When deptno > 10 then
Into student1 values(1,’a’,100)
When dname = ‘SALES’ then
Into student2 values(2,’b’,200)
When loc = ‘NEW YORK’ then
Into student3 values(3,’c’,300)
Select *from dept where deptno>10;
-- This inserts 4 rows because the first condition satisfied 3 times, second condition
satisfied once and the last none.
f) MULTI INSERT WITH CONDITIONS BASED AND ELSE

SQL> Insert all

When deptno > 100 then
Into student1 values(1,’a’,100)
When dname = ‘S’ then
Into student2 values(2,’b’,200)
When loc = ‘NEW YORK’ then
Into student3 values(3,’c’,300)
Else
© Copy rights are reserved.
 19
Into student values(4,’d’,400)
Select *from dept where deptno>10;

g) MULTI INSERT WITH CONDITIONS BASED AND FIRST

SQL> Insert first

When deptno = 20 then
Into student1 values(1,’a’,100)
When dname = ‘RESEARCH’ then
Into student2 values(2,’b’,200)
When loc = ‘NEW YORK’ then
Into student3 values(3,’c’,300)
Select *from dept where deptno=20;
-- This inserts 1 record because the first clause avoid to check the remaining
conditions once the condition is satisfied.
h) MULTI INSERT WITH CONDITIONS BASED, FIRST AND ELSE

SQL> Insert first

When deptno = 30 then
Into student1 values(1,’a’,100)
When dname = ‘R’ then
Into student2 values(2,’b’,200)
When loc = ‘NEW YORK’ then
Into student3 values(3,’c’,300)
Else
Into student values(4,’d’,400)
Select *from dept where deptno=20;
-- This inserts 1 record because the else clause satisfied once
i) MULTI INSERT WITH MULTIBLE TABLES

SQL> Insert all

Into student1 values(1,’a’,100)
Into student2 values(2,’b’,200)
Into student3 values(3,’c’,300)
Select *from dept where deptno=10;
-- This inserts 3 rows
** You can use multi tables with specified fields, with duplicate rows, with conditions,
with first and else clauses.

© Copy rights are reserved.

 20

FUNCTIONS

Functions can be categorized as follows.

 Single row functions

 Group functions

SINGLE ROW FUNCTIONS

Single row functions can be categorized into five. These will be applied for each row and
produces individual output for each row.
 Numeric functions
 String functions
 Date functions
 Miscellaneous functions
 Conversion functions

NUMERIC FUNCTIONS

 Abs
 Sign
 Sqrt
 Mod
 Nvl
 Power
 Exp
 Ln
 Log
 Ceil
 Floor
 Round
 Trunk
 Bitand
 Greatest
 Least
 Coalesce
a) ABS

© Copy rights are reserved.

 21
Absolute value is the measure of the magnitude of value.
Absolute value is always a positive number.
Syntax: abs (value)

Ex:
SQL> select abs(5), abs(-5), abs(0), abs(null) from dual;

ABS(5) ABS(-5) ABS(0) ABS(NULL)

---------- ---------- ---------- -------------
5 -5 0
b) SIGN

Sign gives the sign of a value.

Syntax: sign (value)
Ex: SQL> select sign(5), sign(-5), sign(0), sign(null) from dual;
SIGN(5) SIGN(-5) SIGN(0) SIGN(NULL)
---------- ---------- ---------- --------------
1 -1 0
c) SQRT

This will give the square root of the given value.

Syntax: sqrt (value) -- here value must be positive.
Ex: SQL> select sqrt(4), sqrt(0), sqrt(null), sqrt(1) from dual;
SQRT(4) SQRT(0) SQRT(NULL) SQRT(1)
---------- ---------- --------------- ----------
2 0 1
d) MOD

This will give the remainder.

Syntax: mod (value, divisor)
Ex: SQL> select mod(7,4), mod(1,5), mod(null,null), mod(0,0), mod(-7,4) from dual;
MOD(7,4) MOD(1,5) MOD(NULL,NULL) MOD(0,0) MOD(-7,4)
------------ ---------- --------------------- ----------- -------------
3 1 0 -3
e) NVL

This will substitutes the specified value in the place of null values.
Syntax: nvl (null_col, replacement_value)
Ex: SQL> select * from student; -- here for 3rd row marks value is null

NO NAME MARKS
--- ------- ---------
© Copy rights are reserved.
 22
1 a 100
2 b 200
3 c

SQL> select no, name, nvl(marks,300) from student;

NO NAME NVL(MARKS,300)
--- ------- ---------------------
1 a 100
2 b 200
3 c 300
SQL> select nvl(1,2), nvl(2,3), nvl(4,3), nvl(5,4) from dual;
NVL(1,2) NVL(2,3) NVL(4,3) NVL(5,4)
---------- ---------- ---------- ----------
1 2 4 5
SQL> select nvl(0,0), nvl(1,1), nvl(null,null), nvl(4,4) from dual;
NVL(0,0) NVL(1,1) NVL(null,null) NVL(4,4)
---------- ---------- ----------------- ----------
0 1 4
f) POWER

Power is the ability to raise a value to a given exponent.

Syntax: power (value, exponent)
Ex:SQL> select power(2,5), power(0,0), power(1,1), power(null,null), power(2,-5)
from dual;
POWER(2,5) POWER(0,0) POWER(1,1) POWER(NULL,NULL) POWER(2,-5)
-------------- -------------- ----- --------- ----------------------- ---------------
32 1 1 .03125
g) EXP

This will raise e value to the give power.

Syntax: exp (value)
Ex: SQL> select exp(1), exp(2), exp(0), exp(null), exp(-2) from dual;
EXP(1) EXP(2) EXP(0) EXP(NULL) EXP(-2)
-------- --------- -------- ------------- ----------
2.71828183 7.3890561 1 .135335283
h) LN

This is based on natural or base e logarithm.

Syntax: ln (value) -- here value must be greater than zero which is positive only.
Ex: SQL> select ln(1), ln(2), ln(null) from dual;
LN(1) LN(2) LN(NULL)
© Copy rights are reserved.
 23
------- ------- ------------
0 .693147181
Ln and Exp are reciprocal to each other.
EXP (3) = 20.0855369
LN (20.0855369) = 3
i) LOG

This is based on 10 based logarithm.

Syntax: log (10, value) -- here value must be greater than zero which is positive only.
Ex: SQL> select log(10,100), log(10,2), log(10,1), log(10,null) from dual;
LOG(10,100) LOG(10,2) LOG(10,1) LOG(10,NULL)
--------------- ----------- ------------ -----------------
2 .301029996 0
LN (value) = LOG (EXP(1), value)
SQL> select ln(3), log(exp(1),3) from dual;
LN(3) LOG(EXP(1),3)
------- -----------------
1.09861229 1.09861229
j) CEIL

This will produce a whole number that is greater than or equal to the specified value.
Syntax: ceil (value)
Ex: SQL> select ceil(5), ceil(5.1), ceil(-5), ceil( -5.1), ceil(0), ceil(null) from dual;

CEIL(5) CEIL(5.1) CEIL(-5) CEIL(-5.1) CEIL(0) CEIL(NULL)

--------- ----------- ---------- ------------ -------- --------------
5 6 -5 -5 0
k) FLOOR

This will produce a whole number that is less than or equal to the specified value.
Syntax: floor (value)
Ex: SQL> select floor(5), floor(5.1), floor(-5), floor( -5.1), floor(0), floor(null) from
dual;
FLOOR(5) FLOOR(5.1) FLOOR(-5) FLOOR(-5.1) FLOOR(0) FLOOR(NULL)
----------- ------------- ------------ -------------- ----------- ----------------
5 5 -5 -6 0
l) ROUND

This will rounds numbers to a given number of digits of precision.

Syntax: round (value, precision)
Ex: SQL> select round(123.2345), round(123.2345,2), round(123.2354,2) from dual;
ROUND(123.2345) ROUND(123.2345,0) ROUND(123.2345,2) ROUND(123.2354,2)
© Copy rights are reserved.
 24
--------------------- ------------------------ ----------------------- -----------------------
123 123 123.23 123.24

SQL> select round(123.2345,-1), round(123.2345,-2), round(123.2345,-3),

round(123.2345,-4) from dual;
ROUND(123.2345,-1) ROUND(123.2345,-2) ROUND(123.2345,-3) ROUND(123.2345,-4)
------------------------ ------------------------- ------------------------ ------------------------
120 100 0 0
SQL> select round(123,0), round(123,1), round(123,2) from dual;
ROUND(123,0) ROUND(123,1) ROUND(123,2)
----------------- ----------------- ----------------
123 123 123
SQL> select round(-123,0), round(-123,1), round(-123,2) from dual;

ROUND(-123,0) ROUND(-123,1) ROUND(-123,2)

------------------ ----------------- -------------------
-123 -123 -123
SQL> select round(123,-1), round(123,-2), round(123,-3), round(-123,-1), round(
-123,-2), round(-123,-3) from dual;
ROUND(123,-1) ROUND(123,-2) ROUND(123,-3) ROUND(-123,-1) ROUND(-123,-2)
ROUND(-123,-3)
------------- ------------- ------------- -------------- -------------- --------------------------
120 100 0 -120 -100 0
SQL> select round(null,null), round(0,0), round(1,1), round(-1,-1), round(-2,-2)
from dual;
ROUND(NULL,NULL) ROUND(0,0) ROUND(1,1) ROUND(-1,-1) ROUND(-2,-2)
----------------------- -------------- -------------- ---------------- ----------------
0 1 0 0

m) TRUNC

This will truncates or chops off digits of precision from a number.

Syntax: trunc (value, precision)
Ex: SQL> select trunc(123.2345), trunc(123.2345,2), trunc(123.2354,2) from dual;
TRUNC(123.2345) TRUNC(123.2345,2) TRUNC(123.2354,2)
--------------------- ----------------------- -----------------------
123 123.23 123.23
SQL> select trunc(123.2345,-1), trunc(123.2345,-2), trunc(123.2345,-3),

© Copy rights are reserved.

 25
trunc(123.2345,-4) from dual;
TRUNC(123.2345,-1) TRUNC(123.2345,-2) TRUNC(123.2345,-3) TRUNC(123.2345,-4)
------------------------ ------------------------ ----------------------- ------------------------
120 100 0 0
SQL> select trunc(123,0), trunc(123,1), trunc(123,2) from dual;
TRUNC(123,0) TRUNC(123,1) TRUNC(123,2)
---------------- ---------------- -----------------
123 123 123
SQL> select trunc(-123,0), trunc(-123,1), trunc(-123,2) from dual;
TRUNC(-123,0) TRUNC(-123,1) TRUNC(-123,2)
----------------- ----------------- -----------------
-123 -123 -123
SQL> select trunc(123,-1), trunc(123,-2), trunc(123,-3), trunc(-123,-1), trunc(
-123,2), trunc(-123,-3) from dual;
TRUNC(123,-1) TRUNC(123,-2) TRUNC(123,-3) TRUNC(-123,-1) TRUNC(-123,2) TRUNC(-
123,-3)
------------- ------------- ------------- -------------- ------------- ---------------------------------
120 100 0 -120 -123 0
SQL> select trunc(null,null), trunc(0,0), trunc(1,1), trunc(-1,-1), trunc(-2,-2) from
dual;

TRUNC(NULL,NULL) TRUNC(0,0) TRUNC(1,1) TRUNC(-1,-1) TRUNC(-2,-2)

----------------------- ------------- ------------- --------------- ----------------
0 1 0 0
n) BITAND

This will perform bitwise and operation.

Syntax: bitand (value1, value2)

Ex:
SQL> select bitand(2,3), bitand(0,0), bitand(1,1), bitand(null,null), bitand(-2,-3)
from dual;
BITAND(2,3) BITAND(0,0) BITAND(1,1) BITAND(NULL,NULL) BITAND(-2,-3)
-------------- --------------- -------------- ------------------------ -----------------
2 0 1 -4
o) GREATEST

This will give the greatest number.

Syntax: greatest (value1, value2, value3 … valuen)
Ex: SQL> select greatest(1, 2, 3), greatest(-1, -2, -3) from dual;
© Copy rights are reserved.
 26
GREATEST(1,2,3) GREATEST(-1,-2,-3)
-------------------- -----------------------
3 -1

 If all the values are zeros then it will display zero.

 If all the parameters are nulls then it will display nothing.
 If any of the parameters is null it will display nothing.

p) LEAST

This will give the least number.

Syntax: least (value1, value2, value3 … valuen)
Ex: SQL> select least(1, 2, 3), least(-1, -2, -3) from dual;
LEAST(1,2,3) LEAST(-1,-2,-3)
-------------------- -----------------------
1 -3
 If all the values are zeros then it will display zero.
 If all the parameters are nulls then it will display nothing.
 If any of the parameters is null it will display nothing.
q) COALESCE

This will return first non-null value.

Syntax: coalesce (value1, value2, value3 … valuen)
Ex: SQL> select coalesce(1,2,3), coalesce(null,2,null,5) from dual;
COALESCE(1,2,3) COALESCE(NULL,2,NULL,5)
------------------- -------------------------------
1 2
STRING FUNCTIONS

 Initcap
 Upper
 Lower
 Length
 Rpad
 Lpad
 Ltrim
 Rtrim
 Trim
 Translate
 Replace

© Copy rights are reserved.

 27
 Soundex
 Concat ( ‘ || ‘ Concatenation operator)
 Ascii
 Chr
 Substr
 Instr
 Decode
 Greatest
 Least
 Coalesce
a) INITCAP

This will capitalize the initial letter of the string.

Syntax: initcap (string)
Ex: SQL> select initcap('computer') from dual;
INITCAP
-----------
Computer
b) UPPER

This will convert the string into uppercase.

Syntax: upper (string)
Ex: SQL> select upper('computer') from dual;
UPPER
-----------
COMPUTER

c) LOWER

This will convert the string into lowercase.

Syntax: lower (string)
Ex: SQL> select lower('COMPUTER') from dual;
LOWER
-----------
computer
d) LENGTH

This will give length of the string.

Syntax: length (string)
Ex: SQL> select length('computer') from dual;
LENGTH
-----------
8
© Copy rights are reserved.
 28
e) RPAD

This will allows you to pad the right side of a column with any set of characters.
Syntax: rpad (string, length [, padding_char])

Ex: SQL> select rpad('computer',15,'*'), rpad('computer',15,'*#') from dual;

RPAD('COMPUTER' RPAD('COMPUTER'
---------------------- ----------------------
computer******* computer*#*#*#*

-- Default padding character was blank space.

f) LPAD

This will allows you to pad the left side of a column with any set of characters.
Syntax: lpad (string, length [, padding_char])
Ex: SQL> select lpad('computer',15,'*'), lpad('computer',15,'*#') from dual;
LPAD('COMPUTER' LPAD('COMPUTER'
--------------------- ---------------------
*******computer *#*#*#*computer
-- Default padding character was blank space.
g) LTRIM

This will trim off unwanted characters from the left end of string.
Syntax: ltrim (string [,unwanted_chars])
Ex: SQL> select ltrim('computer','co'), ltrim('computer','com') from dual;
LTRIM( LTRIM
-------- ---------
mputer puter
SQL> select ltrim('computer','puter'), ltrim('computer','omputer') from dual;
LTRIM('C LTRIM('C
---------- ----------
computer computer
-- If you haven’t specify any unwanted characters it will display entire string.
h) RTRIM

This will trim off unwanted characters from the right end of string.
Syntax: rtrim (string [, unwanted_chars])
Ex: SQL> select rtrim('computer','er'), rtrim('computer','ter') from dual;
RTRIM( RTRIM
-------- ---------
comput compu
SQL> select rtrim('computer','comput’), rtrim('computer','compute') from dual;
© Copy rights are reserved.
 29
RTRIM('C RTRIM('C
---------- ----------
computer computer
-- If you haven’t specify any unwanted characters it will display entire string.
i) TRIM

This will trim off unwanted characters from the both sides of string.
Syntax: trim (unwanted_chars from string)
Ex:s SQL> select trim( 'i' from 'indiani') from dual;
TRIM(
-----
ndian
SQL> select trim( leading'i' from 'indiani') from dual; -- this will work as LTRIM

TRIM(L
------
ndiani
SQL> select trim( trailing'i' from 'indiani') from dual; -- this will work as RTRIM

TRIM(T
------
Indian
j) TRANSLATE

This will replace the set of characters, character by character.

Syntax: translate (string, old_chars, new_chars)
Ex: SQL> select translate('india','in','xy') from dual;
TRANS
--------
xydxa
k) REPLACE

This will replace the set of characters, string by string.

Syntax: replace (string, old_chars [, new_chars])
Ex: SQL> select replace('india','in','xy'), replace(‘india’,’in’) from dual;
REPLACE REPLACE
----------- -----------
Xydia dia
l) SOUNDEX

This will be used to find words that sound like other words, exclusively used in where
clause.
Syntax: soundex (string)
Ex: SQL> select * from emp where soundex(ename) = soundex('SMIT');
© Copy rights are reserved.
 30
EMPNO ENAME JOB MGR HIREDATE SAL DEPTNO
-------- -------- ----- ----- ------------ --------- ----------
7369 SMITH CLERK 7902 17-DEC-80 500 20

m) CONCAT

This will be used to combine two strings only.

Syntax: concat (string1, string2)
Ex: SQL> select concat('computer',' operator') from dual;
CONCAT('COMPUTER'
-------------------------
computer operator
If you want to combine more than two strings you have to use concatenation operator(||).
SQL> select 'how' || ' are' || ' you' from dual;
'HOW'||'ARE
---------------
how are you
n) ASCII

This will return the decimal representation in the database character set of the first
character of the string.
Syntax: ascii (string)
Ex: SQL> select ascii('a'), ascii('apple') from dual;
ASCII('A') ASCII('APPLE')
------------ ------------------
97 97
o) CHR

This will return the character having the binary equivalent to the string in either the
database character set or the national character set.
Syntax: chr (number)
Ex: SQL> select chr(97) from dual;
CHR
-----
a
p) SUBSTR

This will be used to extract substrings.

Syntax: substr (string, start_chr_count [, no_of_chars])
Ex: SQL> select substr('computer',2), substr('computer',2,5), substr('computer',3,7)
from dual;
SUBSTR( SUBST SUBSTR
© Copy rights are reserved.
 31
---------- ------- --------
omputer omput mputer
 If no_of_chars parameter is negative then it will display nothing.
 If both parameters except string are null or zeros then it will display nothing.
 If no_of_chars parameter is greater than the length of the string then it ignores and
calculates based on the orginal string length.
 If start_chr_count is negative then it will extract the substring from right end.

1 2 3 4 5 6 7 8

C O M P U T E R

-8 -7 -6 -5 -4 -3 -2 -1
q) INSTR

This will allows you for searching through a string for set of characters.
Syntax: instr (string, search_str [, start_chr_count [, occurrence] ])
Ex: SQL> select instr('information','o',4,1), instr('information','o',4,2) from dual;
INSTR('INFORMATION','O',4,1) INSTR('INFORMATION','O',4,2)
------------------------------------ -------------------------------------
4 10

 If you are not specifying start_chr_count and occurrence then it will start
search from the beginning and finds first occurrence only.
 If both parameters start_chr_count and occurrence are null, it will display
nothing.
r) DECODE

Decode will act as value by value substitution.

For every value of field, it will checks for a match in a series of if/then tests.
Syntax: decode (value, if1, then1, if2, then2, ……. else);
Ex: SQL> select sal, decode(sal,500,'Low',5000,'High','Medium') from emp;
SAL DECODE
----- ---------
500 Low
2500 Medium
2000 Medium
3500 Medium
3000 Medium
5000 High
4000 Medium
5000 High

© Copy rights are reserved.

 32
1800 Medium
1200 Medium

SQL> select decode(1,1,3), decode(1,2,3,4,4,6) from dual;

DECODE(1,1,3) DECODE(1,2,3,4,4,6)
----------------- ------------------------
3 6

 If the number of parameters are odd and different then decode will display
nothing.
 If the number of parameters are even and different then decode will display last
value.
 If all the parameters are null then decode will display nothing.
 If all the parameters are zeros then decode will display zero.
s) GREATEST

This will give the greatest string.

Syntax: greatest (strng1, string2, string3 … stringn)
Ex: SQL> select greatest('a', 'b', 'c'), greatest('satish','srinu','saketh') from dual;
GREAT GREAT
------- -------
c srinu
 If all the parameters are nulls then it will display nothing.
 If any of the parameters is null it will display nothing.
t) LEAST

This will give the least string.

Syntax: greatest (strng1, string2, string3 … stringn)
Ex: SQL> select least('a', 'b', 'c'), least('satish','srinu','saketh') from dual;
LEAST LEAST
------- -------
a saketh
 If all the parameters are nulls then it will display nothing.
 If any of the parameters is null it will display nothing.
u) COALESCE

This will gives the first non-null string.

Syntax: coalesce (strng1, string2, string3 … stringn)
Ex: SQL> select coalesce('a','b','c'), coalesce(null,'a',null,'b') from dual;

COALESCE COALESCE
© Copy rights are reserved.
 33
----------- -----------
a a

DATE FUNCTIONS

 Sysdate
 Current_date
 Current_timestamp
 Systimestamp
 Localtimestamp
 Dbtimezone
 Sessiontimezone
 To_char
 To_date
 Add_months
 Months_between
 Next_day
 Last_day
 Extract
 Greatest
 Least
 Round
 Trunc
 New_time
 Coalesce

Oracle default date format is DD-MON-YY.

We can change the default format to our desired format by using the following command.
SQL> alter session set nls_date_format = ‘DD-MONTH-YYYY’;
But this will expire once the session was closed.
a) SYSDATE

This will give the current date.

Ex: SQL> select sysdate from dual;
SYSDATE
-----------
24-DEC-06
b) CURRENT_DATE

This will returns the current date in the session’s timezone.

© Copy rights are reserved.

 34
Ex: SQL> select current_date from dual;
CURRENT_DATE
------------------
24-DEC-06
c) CURRENT_TIMESTAMP

This will returns the current timestamp with the active time zone information.
Ex: SQL> select current_timestamp from dual;
CURRENT_TIMESTAMP
---------------------------------------------------------------------------
09-FEB-10 10.38.41.401956000 AM ASIA/CALCUTTA
d) SYSTIMESTAMP

This will returns the system date, including fractional seconds and time zone of the
database.
Ex: SQL> select systimestamp from dual;
SYSTIMESTAMP
---------------------------------------------------------------------------
24-DEC-06 03.49.31.830099 AM +05:30
e) LOCALTIMESTAMP

This will returns local timestamp in the active time zone information, with no time
zone information shown.
Ex: SQL> select localtimestamp from dual;
LOCALTIMESTAMP
---------------------------------------------------------------------------
24-DEC-06 03.44.18.502874 AM

f) DBTIMEZONE

This will returns the current database time zone in UTC format. (Coordinated Universal Time)
Ex: SQL> select dbtimezone from dual;
DBTIMEZONE
---------------
-07:00
g) SESSIONTIMEZONE

This will returns the value of the current session’s time zone.
Ex: SQL> select sessiontimezone from dual;
SESSIONTIMEZONE
------------------------------------
Asia/Calcutta
h) TO_CHAR

This will be used to extract various date formats.

The available date formats as follows.

© Copy rights are reserved.

 35

Syntax: to_char (date, format)

DATE FORMATS

D -- No of days in week
DD -- No of days in month
DDD -- No of days in year
MM -- No of month
MON -- Three letter abbreviation of month
MONTH -- Fully spelled out month
RM -- Roman numeral month
DY -- Three letter abbreviated day
DAY -- Fully spelled out day
Y -- Last one digit of the year
YY -- Last two digits of the year
YYY -- Last three digits of the year
YYYY -- Full four digit year
SYYYY -- Signed year
I -- One digit year from ISO standard
IY -- Two digit year from ISO standard
IYY -- Three digit year from ISO standard
IYYY -- Four digit year from ISO standard
Y, YYY -- Year with comma
YEAR -- Fully spelled out year
CC -- Century
Q -- No of quarters
W -- No of weeks in month
WW -- No of weeks in year
IW -- No of weeks in year from ISO standard
HH -- Hours
MI -- Minutes
SS -- Seconds
FF -- Fractional seconds
AM or PM -- Displays AM or PM depending upon time of day
A.M or P.M -- Displays A.M or P.M depending upon time of day
AD or BC -- Displays AD or BC depending upon the date

© Copy rights are reserved.

 36
A.D or B.C -- Displays AD or BC depending upon the date
FM -- Prefix to month or day, suppresses padding of month or day
TH -- Suffix to a number
SP -- suffix to a number to be spelled out
SPTH -- Suffix combination of TH and SP to be both spelled out
THSP -- same as SPTH
Ex: SQL> select to_char(sysdate,'dd month yyyy hh:mi:ss am dy') from dual;
TO_CHAR(SYSDATE,'DD MONTH YYYYHH:MI
----------------------------------------------------
24 december 2006 02:03:23 pm sun
SQL> select to_char(sysdate,'dd month year') from dual;
TO_CHAR(SYSDATE,'DDMONTHYEAR')
-------------------------------------------------------
24 december two thousand six
SQL> select to_char(sysdate,'dd fmmonth year') from dual;
TO_CHAR(SYSDATE,'DD FMMONTH YEAR')
-------------------------------------------------------
24 december two thousand six
SQL> select to_char(sysdate,'ddth DDTH') from dual;
TO_CHAR(S
------------
24th 24TH
SQL> select to_char(sysdate,'ddspth DDSPTH') from dual;
TO_CHAR(SYSDATE,'DDSPTHDDSPTH
------------------------------------------
twenty-fourth TWENTY-FOURTH
SQL> select to_char(sysdate,'ddsp Ddsp DDSP ') from dual;
TO_CHAR(SYSDATE,'DDSPDDSPDDSP')
------------------------------------------------
twenty-four Twenty-Four TWENTY-FOUR
i) TO_DATE

This will be used to convert the string into date format.

Syntax: to_date (date)
Ex: select to_char(to_date('24/dec/2006','dd/mon/yyyy'), 'dd * month * day') from dual;
TO_CHAR(TO_DATE('24/DEC/20
--------------------------
24 * december * Sunday
-- If you are not using to_char oracle will display output in default date format.
© Copy rights are reserved.
 37
j) ADD_MONTHS
This will add the specified months to the given date.
Syntax: add_months (date, no_of_months)

Ex: SQL> select add_months(to_date('11-jan-1990','dd-mon-yyyy'), 5) from dual;

ADD_MONTHS
----------------
11-JUN-90
SQL> select add_months(to_date('11-jan-1990','dd-mon-yyyy'), -5) from dual;
ADD_MONTH
---------------
11-AUG-89
 If no_of_months is zero then it will display the same date.
 If no_of_months is null then it will display nothing.
k) MONTHS_BETWEEN

This will give difference of months between two dates.

Syntax: months_between (date1, date2)
Ex: SQL> select months_between(to_date('11-aug-1990','dd-mon-yyyy'), to_date('11-
jan-1990','dd-mon-yyyy')) from dual;
MONTHS_BETWEEN(TO_DATE('11-AUG-1990','DD-MON-YYYY'),TO_DATE('11-JAN-1990','DD-
MON-YYYY'))
-----------------------------------------------------------------------------------------------
7
SQL> select months_between(to_date('11-jan-1990','dd-mon-yyyy'), to_date('11-aug-
1990','dd-mon-yyyy')) from dual;
MONTHS_BETWEEN(TO_DATE('11-JAN-1990','DD-MON-YYYY'),TO_DATE('11-AUG-1990','DD-
MON-YYYY'))
-------------------------------------------------------------------------------------------------
-7
l) NEXT_DAY

This will produce next day of the given day from the specified date.
Syntax: next_day (date, day)
Ex: SQL> select next_day(to_date('24-dec-2006','dd-mon-yyyy'),'sun') from dual;
NEXT_DAY(
-------------
31-DEC-06

© Copy rights are reserved.

 38
-- If the day parameter is null then it will display nothing.
m) LAST_DAY

This will produce last day of the given date.

Syntax: last_day (date)

Ex: SQL> select last_day(to_date('24-dec-2006','dd-mon-yyyy')) from dual;

LAST_DAY(
-------------
31-DEC-06
n) EXTRACT

This is used to extract a portion of the date value.

Syntax: extract ((year | month | day | hour | minute | second), date)
Ex: SQL> select extract(year from sysdate) from dual;
EXTRACT(YEARFROMSYSDATE)
------------------------------------
2006
-- You can extract only one value at a time.
o) GREATEST

This will give the greatest date.

Syntax: greatest (date1, date2, date3 … daten)
Ex: SQL> select greatest(to_date('11-jan-90','dd-mon-yy'),to_date('11-mar-90','dd-
mon-yy'),to_date('11-apr-90','dd-mon-yy')) from dual;
GREATEST(
-------------
11-APR-90
p) LEAST

This will give the least date.

Syntax: least (date1, date2, date3 … daten)
Ex: SQL> select least(to_date('11-jan-90','dd-mon-yy'),to_date('11-mar-90','dd-mon-
yy'),to_date('11-apr-90','dd-mon-yy')) from dual;
LEAST(
-------------
11-JAN-90
q) ROUND

Round will rounds the date to which it was equal to or greater than the given date.
Syntax: round (date, (day | month | year))
If the second parameter was year then round will checks the month of the given date in
© Copy rights are reserved.
 39
the following ranges.
JAN -- JUN
JUL -- DEC

If the month falls between JAN and JUN then it returns the first day of the current year.
If the month falls between JUL and DEC then it returns the first day of the next year.
If the second parameter was month then round will checks the day of the given date in
The following ranges.
1 -- 15
16 -- 31
If the day falls between 1 and 15 then it returns the first day of the current month.
If the day falls between 16 and 31 then it returns the first day of the next month.
If the second parameter was day then round will checks the week day of the given date
in the following ranges.
SUN -- WED
THU -- SUN

If the week day falls between SUN and WED then it returns the previous sunday.
If the weekday falls between THU and SUN then it returns the next sunday.
 If the second parameter was null then it returns nothing.
 If the you are not specifying the second parameter then round will resets the time to the
begining of the current day in case of user specified date.
 If the you are not specifying the second parameter then round will resets the time to the
begining of the next day in case of sysdate.
Ex:
SQL> select round(to_date('24-dec-04','dd-mon-yy'),'year'), round(to_date('11-mar-
06','dd-mon-yy'),'year') from dual;
ROUND(TO_ ROUND(TO_
------------ ---------------
01-JAN-05 01-JAN-06
SQL> select round(to_date('11-jan-04','dd-mon-yy'),'month'), round(to_date('18-
jan-04','dd-mon-yy'),'month') from dual;
ROUND(TO_ ROUND(TO_
------------- ---------------
01-JAN-04 01-FEB-04
SQL> select round(to_date('26-dec-06','dd-mon-yy'),'day'), round(to_date('29-dec-
06','dd-mon-yy'),'day') from dual;
ROUND(TO_ ROUND(TO_
-------------- --------------

© Copy rights are reserved.

 40
24-DEC-06 31-DEC-06
SQL> select to_char(round(to_date('24-dec-06','dd-mon-yy')), 'dd mon yyyy
hh:mi:ss am') from dual;
TO_CHAR(ROUND(TO_DATE('
---------------------------------
24 dec 2006 12:00:00 am
r) TRUNC

Trunc will chops off the date to which it was equal to or less than the given date.
Syntax: trunc (date, (day | month | year))
 If the second parameter was year then it always returns the first day of the current year.
 If the second parameter was month then it always returns the first day of the current
month.
 If the second parameter was day then it always returns the previous sunday.
 If the second parameter was null then it returns nothing.
 If the you are not specifying the second parameter then trunk will resets the time to the
begining of the current day.
Ex:
SQL> select trunc(to_date('24-dec-04','dd-mon-yy'),'year'), trunc(to_date('11-mar-
06','dd-mon-yy'),'year') from dual;
TRUNC(TO_ TRUNC(TO_
------------- --------------
01-JAN-04 01-JAN-06
SQL> select trunc(to_date('11-jan-04','dd-mon-yy'),'month'), trunc(to_date('18-jan-
04','dd-mon-yy'),'month') from dual;
TRUNC(TO_ TRUNC(TO_
------------- -------------
01-JAN-04 01-JAN-04
SQL> select trunc(to_date('26-dec-06','dd-mon-yy'),'day'), trunc(to_date('29-dec-
06','dd-mon-yy'),'day') from dual;
TRUNC(TO_ TRUNC(TO_
------------- --------------
24-DEC-06 24-DEC-06
SQL> select to_char(trunc(to_date('24-dec-06','dd-mon-yy')), 'dd mon yyyy hh:mi:ss
am') from dual;
TO_CHAR(TRUNC(TO_DATE('
---------------------------------
24 dec 2006 12:00:00 am
s) NEW_TIME
© Copy rights are reserved.
 41
This will give the desired timezone’s date and time.
Syntax: new_time (date, current_timezone, desired_timezone)
Available timezones are as follows.

TIMEZONES

AST/ADT -- Atlantic standard/day light time

BST/BDT -- Bering standard/day light time
CST/CDT -- Central standard/day light time
EST/EDT -- Eastern standard/day light time
GMT -- Greenwich mean time
HST/HDT -- Alaska-Hawaii standard/day light time
MST/MDT -- Mountain standard/day light time
NST -- Newfoundland standard time
PST/PDT -- Pacific standard/day light time
YST/YDT -- Yukon standard/day light time

Ex: select to_char(new_time(sysdate,'gmt','yst'),'dd mon yyyy hh:mi:ss am') from dual;

TO_CHAR(NEW_TIME(SYSDAT
-----------------------------------
24 dec 2006 02:51:20 pm
SQL> select to_char(new_time(sysdate,'gmt','est'),'dd mon yyyy hh:mi:ss am') from dual;
TO_CHAR(NEW_TIME(SYSDAT
-----------------------
24 dec 2006 06:51:26 pm
t) COALESCE

This will give the first non-null date.

Syntax: coalesce (date1, date2, date3 … daten)
Ex:select coalesce('12-jan-90','13-jan-99'), coalesce(null,'12-jan-90','23-mar-98',null) from
dual;
COALESCE( COALESCE(
------------- ------------
12-jan-90 12-jan-90

MISCELLANEOUS FUNCTIONS

 Uid
© Copy rights are reserved.
 42
 User
 Vsize
 Rank
 Dense_rank

a) UID

This will returns the integer value corresponding to the user currently logged in.
Ex: SQL> select uid from dual;

UID
----------
319
b) USER

This will returns the login’s user name.

Ex: SQL> select user from dual;
USER
----------------
SAKETH
c) VSIZE

This will returns the number of bytes in the expression.

Ex: SQL> select vsize(123), vsize('computer'), vsize('12-jan-90') from dual;
VSIZE(123) VSIZE('COMPUTER') VSIZE('12-JAN-90')
------------- ----------------------- ----------------------
3 8 9
d) RANK

This will give the non-sequential ranking.

Ex: SQL> select rownum,sal from (select sal from emp order by sal desc);
ROWNUM SAL
---------- ----------
1 5000
2 3000
3 3000
4 2975
5 2850
6 2450
7 1600
8 1500
© Copy rights are reserved.
 43
9 1300
10 1250
11 1250
12 1100
13 1000

SQL> select rank(2975) within group(order by sal desc) from emp;

RANK(2975)WITHINGROUP(ORDERBYSALDESC)
--------------------------------------------------------
4
d) DENSE_RANK

This will give the sequential ranking.

Ex: SQL> select dense_rank(2975) within group(order by sal desc) from emp;
DENSE_RANK(2975)WITHINGROUP(ORDERBYSALDESC)
-----------------------------------------------------------------
3

CONVERSION FUNCTIONS

 Bin_to_num
 Chartorowid
 Rowidtochar
 To_number
 To_char
 To_date
a) BIN_TO_NUM

This will convert the binary value to its numerical equivalent.

Syntax: bin_to_num( binary_bits)
Ex: SQL> select bin_to_num(1,1,0) from dual;
BIN_TO_NUM(1,1,0)
------------------------
6
 If all the bits are zero then it produces zero.
 If all the bits are null then it produces an error.
b) CHARTOROWID

This will convert a character string to act like an internal oracle row identifier or rowid.
c) ROWIDTOCHAR

This will convert an internal oracle row identifier or rowid to character string.

© Copy rights are reserved.

 44
d) TO_NUMBER

This will convert a char or varchar to number.

e) TO_CHAR

This will convert a number or date to character string.

f) TO_DATE

This will convert a number, char or varchar to a date.

GROUP FUNCTIONS
 Sum
 Avg
 Max
 Min
 Count
Group functions will be applied on all the rows but produces single output.
a) SUM

This will give the sum of the values of the specified column.
Syntax: sum (column)
Ex: SQL> select sum(sal) from emp;
SUM(SAL)
----------
38600
b) AVG

This will give the average of the values of the specified column.
Syntax: avg (column)
Ex: SQL> select avg(sal) from emp;
AVG(SAL)
---------------
2757.14286
c) MAX

This will give the maximum of the values of the specified column.
Syntax: max (column)
Ex: SQL> select max(sal) from emp;
MAX(SAL)
----------
5000
d) MIN
This will give the minimum of the values of the specified column.

© Copy rights are reserved.

 45
Syntax: min (column)
Ex: SQL> select min(sal) from emp;
MIN(SAL)
----------
500

e) COUNT

This will give the count of the values of the specified column.
Syntax: count (column)
Ex: SQL> select count(sal),count(*) from emp;
COUNT(SAL) COUNT(*)
-------------- ------------
14 14

CONSTRAINTS
Oracle constraints are means in the process of defining some conditions about the
database that must remain true while inputting/modifying/deleting data in the database.

Constraints are used to enforce table rules and prevent data dependent deletion (enforce
database integrity). You may also use them to enforce business rules (with some
magination).

Constraints are categorized as follows.

Domain integrity constraints
 Not null
 Check
Entity integrity constraints
 Unique
 Primary key
Referential integrity constraints
 Foreign key
Constraints are always attached to a column not a table.
We can add constraints in three ways.
 Column level -- along with the column definition
 Table level -- after the table definition
 Alter level -- using alter command

© Copy rights are reserved.

 46
While adding constraints you need not specify the name but the type only, oracle will internally
name the constraint.
If you want to give a name to the constraint, you have to use the constraint clause.
NOT NULL
This is used to avoid null values.
We can add this constraint in column level only.
Ex:
SQL> create table student(no number(2) not null, name varchar(10), marks number(3));
SQL> create table student(no number(2) constraint nn not null, name varchar(10),
marks number(3));

CHECK
This is used to insert the values based on specified condition.
We can add this constraint in all three levels.
Ex: COLUMN LEVEL

SQL> create table student(no number(2) , name varchar(10), marks number(3) check
(marks > 300));
SQL> create table student(no number(2) , name varchar(10), marks number(3)
constraint ch check(marks > 300));
TABLE LEVEL

SQL> create table student(no number(2) , name varchar(10), marks number(3), check
(marks > 300));
SQL> create table student(no number(2) , name varchar(10), marks number(3),
constraint ch check(marks > 300));
ALTER LEVEL

SQL> alter table student add check(marks>300);

SQL> alter table student add constraint ch check(marks>300);

UNIQUE
This is used to avoid duplicates but it allow nulls.
We can add this constraint in all three levels.
Ex: COLUMN LEVEL

SQL> create table student(no number(2) unique, name varchar(10), marks

number(3));
SQL> create table student(no number(2) constraint un unique, name varchar(10),
marks number(3));
TABLE LEVEL

© Copy rights are reserved.

 47
SQL> create table student(no number(2) , name varchar(10), marks number(3),
unique(no));
SQL> create table student(no number(2) , name varchar(10), marks number(3),
constraint un unique(no));
ALTER LEVEL

SQL> alter table student add unique(no);

SQL> alter table student add constraint un unique(no);

PRIMARY KEY
 This is used to avoid duplicates and nulls. This will work as combination of unique and not
null.
 Primary key always attached to the parent table.
 We can add this constraint in all three levels.
Ex: COLUMN LEVEL

SQL> create table student(no number(2) primary key, name varchar(10), marks
number(3));
SQL> create table student(no number(2) constraint pk primary key, name varchar(10),
marks number(3));
TABLE LEVEL

SQL> create table student(no number(2) , name varchar(10), marks number(3),

primary key(no));
SQL> create table student(no number(2) , name varchar(10), marks number(3),
constraint pk primary key(no));
ALTER LEVEL

SQL> alter table student add primary key(no);

SQL> alter table student add constraint pk primary key(no);

FOREIGN KEY
 This is used to reference the parent table primary key column which allows duplicates.
 Foreign key always attached to the child table.
 We can add this constraint in table and alter levels only.
Ex: TABLE LEVEL

SQL> create table emp(empno number(2), ename varchar(10), deptno number(2),

primary key(empno), foreign key(deptno) references dept(deptno));
SQL> create table emp(empno number(2), ename varchar(10), deptno number(2),
constraint pk primary key(empno), constraint fk foreign key(deptno) references
dept(deptno));
ALTER LEVEL

SQL> alter table emp add foreign key(deptno) references dept(deptno);

© Copy rights are reserved.

 48
SQL>alter table emp add constraint fk foreign key(deptno) references dept(deptno);
Once the primary key and foreign key relationship has been created then you can not remove
any parent record if the dependent childs exists.

USING ON DELTE CASCADE

By using this clause you can remove the parent record even it childs exists.
Because when ever you remove parent record oracle automatically removes all its dependent
records from child table, if this clause is present while creating foreign key constraint.

Ex: TABLE LEVEL

SQL> create table emp(empno number(2), ename varchar(10), deptno number(2),

primary key(empno), foreign key(deptno) references dept(deptno) on delete
cascade);
SQL> create table emp(empno number(2), ename varchar(10), deptno number(2),
constraint pk primary key(empno), constraint fk foreign key(deptno) references
dept(deptno) on delete cascade);
ALTER LEVEL

SQL> alter table emp add foreign key(deptno) references dept(deptno) on delete
cascade;
SQL> alter table emp add constraint fk foreign key(deptno) references dept(deptno) on
delete cascade;

COMPOSITE KEYS
A composite key can be defined on a combination of columns.
We can define composite keys on entity integrity and referential integrity constraints.
Composite key can be defined in table and alter levels only.
Ex: UNIQUE (TABLE LEVEL)

SQL> create table student(no number(2) , name varchar(10), marks number(3),

unique(no,name));
SQL> create table student(no number(2) , name varchar(10), marks number(3),
constraint un unique(no,name));
UNIQUE (ALTER LEVEL)

SQL> alter table student add unique(no,name);

SQL> alter table student add constraint un unique(no,name);
PRIMARY KEY (TABLE LEVEL)

SQL> create table student(no number(2) , name varchar(10), marks number(3),

primary key(no,name));
SQL> create table student(no number(2) , name varchar(10), marks number(3),
constraint pk primary key(no,name));

© Copy rights are reserved.

 49
PRIMARY KEY (ALTER LEVEL)

SQL> alter table student add primary key(no,anme);

SQL> alter table student add constraint pk primary key(no,name);
FOREIGN KEY (TABLE LEVEL)

SQL> create table emp(empno number(2), ename varchar(10), deptno number(2),

dname varchar(10), primary key(empno), foreign key(deptno,dname) references
dept(deptno,dname));
SQL> create table emp(empno number(2), ename varchar(10), deptno number(2),
dname varchar(10), constraint pk primary key(empno), constraint fk foreign
key(deptno,dname) references dept(deptno,dname));

FOREIGN KEY (ALTER LEVEL)

SQL> alter table emp add foreign key(deptno,dname) references dept(deptno,dname);

SQL> alter table emp add constraint fk foreign key(deptno,dname) references
dept(deptno,dname);

DEFERRABLE CONSTRAINTS
Each constraint has two additional attributes to support deferred checking of constraints.
 Deferred initially immediate
 Deferred initially deferred
Deferred initially immediate checks for constraint violation at the time of insert.
Deferred initially deferred checks for constraint violation at the time of commit.
Ex:SQL> create table student(no number(2), name varchar(10), marks number(3),
constraint un unique(no) deferred initially immediate);
SQL> create table student(no number(2), name varchar(10), marks number(3),
constraint un unique(no) deferred initially deferred);
SQL> alter table student add constraint un unique(no) deferrable initially deferred;
SQL> set constraints all immediate;
This will enable all the constraints violations at the time of inserting.
SQL> set constraints all deferred;
This will enable all the constraints violations at the time of commit.

OPERATIONS WITH CONSTRAINTS

Possible operations with constraints as follows.
 Enable
 Disable

© Copy rights are reserved.

 50
 Enforce
 Drop

ENABLE

This will enable the constraint. Before enable, the constraint will check the existing data.
Ex: SQL> alter table student enable constraint un;
DISABLE

This will disable the constraint.

Ex: SQL> alter table student disable constraint un;
ENFORCE

This will enforce the constraint rather than enable for future inserts or updates.
This will not check for existing data while enforcing data.
Ex: SQL> alter table student enforce constraint un;

DROP

This will remove the constraint.

Ex: SQL> alter table student drop constraint un;
Once the table is dropped, constraints automatically will drop.

CASE AND DEFAULT

CASE
Case is similar to decode but easier to understand while going through coding
Ex: SQL> Select sal, Case sal When 500 then ‘low’ When 5000 then ‘high’ Else ‘medium’
End case From emp;
SAL CASE
----- --------
500 low
2500 medium
2000 medium
3500 medium
3000 medium
5000 high
4000 medium
5000 high
1800 medium
1200 medium
2000 medium
© Copy rights are reserved.
 51
2700 medium
2200 medium
3200 medium

DEFAULT
Default can be considered as a substitute behavior of not null constraint when applied to new
rows being entered into the table.
When you define a column with the default keyword followed by a value, you are actually telling
the database that, on insert if a row was not assigned a value for this column, use the default
value that you have specified.
Default is applied only during insertion of new rows.

Ex: SQL> create table student(no number(2) default 11,name varchar(2));

SQL> insert into student values(1,'a');
SQL> insert into student(name) values('b');
SQL> select * from student;
NO NAME
------ ---------
1 a
11 b
SQL> insert into student values(null, ‘c’);
SQL> select * from student;
NO NAME
------ ---------
1 a
11 b
C
-- Default can not override nulls.

ABSTRACT DATA TYPES

Some times you may want type which holds all types of data including numbers, chars and
special characters something like this. You can not achieve this using pre-defined types.
You can define custom types which holds your desired data.
Ex:
Suppose in a table we have address column which holds hno and city information.
We will define a custom type which holds both numeric as well as char data.
© Copy rights are reserved.
 52

CREATING ADT

SQL> create type addr as object(hno number(3),city varchar(10)); /

CREATING TABLE BASED ON ADT

SQL> create table student(no number(2),name varchar(2),address addr);

INSERTING DATA INTO ADT TABLES

SQL> insert into student values(1,'a',addr(111,'hyd'));

SQL> insert into student values(2,'b',addr(222,'bang'));
SQL> insert into student values(3,'c',addr(333,'delhi'));
SELECTING DATA FROM ADT TABLES

SQL> select * from student;

NO NAME ADDRESS(HNO, CITY)
--- ------- -------------------------
1 a ADDR(111, 'hyd')
SQL> select no,name,s.address.hno,s.address.city from student s;
NO NAME ADDRESS.HNO ADDRESS.CITY
---- ------- ----------------- ----------------
1 a 111 hyd
2 b 222 bang
3 c 333 delhi

UPDATE WITH ADT TABLES

SQL> update student s set s.address.city = 'bombay' where s.address.hno = 333;

SQL> select no,name,s.address.hno,s.address.city from student s;
NO NAME ADDRESS.HNO ADDRESS.CITY
---- ------- ----------------- ----------------
1 a 111 hyd
2 b 222 bang
3 c 333 bombay
DELETE WITH ADT TABLES

SQL> delete student s where s.address.hno = 111;

SQL> select no,name,s.address.hno,s.address.city from student s;
NO NAME ADDRESS.HNO ADDRESS.CITY
---- ------- ----------------- ----------------
2 b 222 bang
3 c 333 bombay
DROPPING ADT

SQL> drop type addr;

© Copy rights are reserved.

 53

OBJECT VIEWS AND METHODS

OBJECT VIEWS
If you want to implement objects with the existing table, object views come into picture.
You define the object and create a view which relates this object to the existing table nothing
but object view.
Object views are used to relate the user defined objects to the existing table.
Ex:
1) Assume that the table student has already been created with the following columns
SQL> create table student(no number(2),name varchar(10),hno number(3),city
varchar(10));
2) Create the following types
SQL> create type addr as object(hno number(2),city varchar(10));/
SQL> create type stud as object(name varchar(10),address addr);/
3) Relate the objects to the student table by creating the object view
SQL> create view student_ov(no,stud_info) as select no,stud(name,addr(hno,city))
from student;
4) Now you can insert data into student table in two ways
a) By regular insert
SQL> Insert into student values(1,’sudha’,111,’hyd’);
b) By using object view
SQL> Insert into student_ov values(1,stud(‘sudha’,addr(111,’hyd’)));

METHODS
You can define methods which are nothing but functions in types and apply in the tables which
holds the types;
Ex:
1) Defining methods in types
SQL> Create type stud as object(name varchar(10),marks number(3),
Member function makrs_f(marks in number) return number,
Pragma restrict_references(marks_f,wnds,rnds,wnps,fnps));/
2) Defining type body
SQL> Create type body stud as
Member function marks_f(marks in number) return number is
Begin
Return (marks+100);
End marks_f;

© Copy rights are reserved.

 54
End;/
3) Create a table using stud type
SQL> Create table student(no number(2),info stud);
4) Insert some data into student table
SQL> Insert into student values(1,stud(‘sudha’,100));
5) Using method in select
SQL> Select s.info.marks_f(s.info.marks) from student s;
-- Here we are using the pragma restrict_references to avoid the writes to the
Database.

VARRAYS AND NESTED TABLES

VARRAYS
A varying array allows you to store repeating attributes of a record in a single row but with limit.
Ex:
1) We can create varrays using oracle types as well as user defined types.
a) Varray using pre-defined types
SQL> Create type va as varray(5) of varchar(10);/
b) Varrays using user defined types
SQL> Create type addr as object(hno number(3),city varchar(10));/
SQL> Create type va as varray(5) of addr;/
2) Using varray in table
SQL> Create table student(no number(2),name varchar(10),address va);
3) Inserting values into varray table
SQL> Insert into student values(1,’sudha’,va(addr(111,’hyd’)));
SQL> Insert into student values(2,’jagan’,va(addr(111,’hyd’),addr(222,’bang’)));
4) Selecting data from varray table
SQL> Select * from student;
-- This will display varray column data along with varray and adt;
SQL> Select no,name, s.* from student s1, table(s1.address) s;
-- This will display in general format
5) Instead of s.* you can specify the columns in varray
SQL> Select no,name, s.hno,s.city from student s1,table(s1.address) s;
-- Update and delete not possible in varrays.
-- Here we used table function which will take the varray column as input for producing
output excluding varray and types.

NESTED TABLES
© Copy rights are reserved.
 55

A nested table is, as its name implies, a table within a table. In this case it is a table that is
represented as a column within another table.
Nested table has the same effect of varrays but has no limit.
Ex:
1) We can create nested tables using oracle types and user defined types which has no
limit.
a) Nested tables using pre-defined types
SQL> Create type nt as table of varchar(10);/

b) Nested tables using user defined types

SQL> Create type addr as object(hno number(3),city varchar(10));/
SQL> Create type nt as table of addr;/
2) Using nested table in table
SQL> Create table student(no number(2),name varchar(10),address nt) nested table
address store as student_temp;
3) Inserting values into table which has nested table
SQL> Insert into student values (1,’sudha’,nt(addr(111,’hyd’)));
SQL> Insert into student values (2,’jagan’,nt(addr(111,’hyd’),addr(222,’bang’)));
4) Selecting data from table which has nested table
SQL> Select * from student;
-- This will display nested table column data along with nested table and adt;
SQL> Select no,name, s.* from student s1, table(s1.address) s;
-- This will display in general format
5) Instead of s.* you can specify the columns in nested table
SQL> Select no,name, s.hno,s.city from student s1,table(s1.address) s;
6) Inserting nested table data to the existing row
SQL> Insert into table(select address from student where no=1)
values(addr(555,’chennai’));
7) Update in nested tables
SQL> Update table(select address from student where no=2) s set s.city=’bombay’
where s.hno = 222;
8) Delete in nested table
SQL> Delete table(select address from student where no=3) s where s.hno=333;

DATA MODEL

 ALL_COLL_TYPES
 ALL_TYPES

© Copy rights are reserved.

 56
 DBA_COLL_TYPES
 DBA_TYPES
 USER_COLL_TYPES
 USER_TYPES

FLASHBACK QUERY

Used to retrieve the data which has been already committed with out going for recovery.
Flashbacks are of two types
 Time base flashback
 SCN based flashback (SCN stands for System Change Number)
Ex:
1) Using time based flashback
a) SQL> Select *from student;
-- This will display all the rows
b) SQL> Delete student;
c) SQL> Commit; -- this will commit the work.
d) SQL> Select *from student;
-- Here it will display nothing
e) Then execute the following procedures
SQL> Exec dbms_flashback.enable_at_time(sysdate-2/1440)
f) SQL> Select *from student;
-- Here it will display the lost data
-- The lost data will come but the current system time was used
g) SQL> Exec dbms_flashback.disable
-- Here we have to disable the flashback to enable it again

2) Using SCN based flashback

a) Declare a variable to store SCN
SQL> Variable s number
b) Get the SCN
SQL> Exec :s := exec dbms_flashback.get_system_change_number
c) To see the SCN
SQL> Print s
d) Then execute the following procedures

© Copy rights are reserved.

 57
SQL> Exec dbms_flashback.enable_at_system_change_number(:s)
SQL> Exec dbms_flashback.disable

EXTERNAL TABLES

You can user external table feature to access external files as if they are tables inside the
database.
When you create an external table, you define its structure and location with in oracle.
When you query the table, oracle reads the external table and returns the results just as if the
data had been stored with in the database.
ACCESSING EXTERNAL TABLE DATA
To access external files from within oracle, you must first use the create directory command to
define a directory object pointing to the external file location
Users who will access the external files must have the read and write privilege on the directory.
Ex:
CREATING DIRECTORY AND OS LEVEL FILE

SQL> Sqlplus system/manager

SQL> Create directory saketh_dir as ‘/Visdb/visdb/9.2.0/external’;
SQL> Grant all on directory saketh_dir to saketh;
SQL> Conn saketh/saketh
SQL> Spool dept.lst
SQL> Select deptno || ‘,’ || dname || ‘,’ || loc from dept;
SQL> Spool off
CREATING EXTERNAL TABLE

SQL> Create table dept_ext

(deptno number(2),
Dname varchar(14),
Loc varchar(13))
Organization external ( type oracle_loader Default directory saketh_dir
Access parameters ( records delimited by newline Fields terminated by “,”
( deptno number(2), Dname varchar(14),Loc varchar(13)))
Location (‘/Visdb/visdb/9.2.0/dept.lst’));

SELECTING DATA FROM EXTERNAL TABLE

SQL> select * from dept_ext;

© Copy rights are reserved.
 58
This will read from dept.lst which is a operating system level file.

LIMITATIONS ON EXTERNAL TABLES

a) You can not perform insert, update, and delete operations

a) Indexing not possible
b) Constraints not possible
BENEFITS OF EXTERNAL TABLES

a) Queries of external tables complete very quickly even though a full table scan id required
with each access
b) You can join external tables to each other or to standard tables

REF DEREF VALUE

REF
 The ref function allows referencing of existing row objects.
 Each of the row objects has an object id value assigned to it.
 The object id assigned can be seen by using ref function.
DEREF
 The deref function performs opposite action.
 It takes a reference value of object id and returns the value of the row objects.
VALUE
 Even though the primary table is object table, still it displays the rows in general format.
 To display the entire structure of the object, this will be used.
Ex:
1) create vendot_adt type
SQL> Create type vendor_adt as object (vendor_code number(2), vendor_name
varchar(2), vendor_address varchar(10));/
2) create object tables vendors and vendors1
SQL> Create table vendors of vendor_adt;
SQL> Create table vendors1 of vendor_adt;
3) insert the data into object tables
SQL> insert into vendors values(1, ‘a’, ‘hyd’);
SQL> insert into vendors values(2, ‘b’, ‘bang’);
SQL> insert into vendors1 values(3, ‘c’, ‘delhi’);
SQL> insert into vendors1 values(4, ‘d’, ‘chennai’);
4) create another table orders which holds the vendor_adt type also.
SQL> Create table orders (order_no number(2), vendor_info ref vendor_adt);
Or
SQL> Create table orders (order_no number(2), vendor_info ref vendor_adt with
© Copy rights are reserved.
 59
rowid);
5) insert the data into orders table
The vendor_info column in the following syntaxes will store object id of any table
which is referenced by vendor_adt object ( both vendors and vendors1).
SQL> insert into orders values(11,(select ref(v) from vendors v where vendor_code = 1));

SQL> insert into orders values(12,(select ref(v) from vendors v where vendor_code = 2));
SQL> insert into orders values(13,(select ref(v1) from vendors1 v1 where
vendor_code = 1));
SQL> insert into orders values(14,(select ref(v1) from vendors1 v1 where
vendor_code = 1));
6) To see the object ids of vendor table
SQL> Select ref(V) from vendors v;
7) If you see the vendor_info of orders it will show only the object ids not the values,
to see the values
SQL> Select deref(o.vendor_info) from orders o;
8) Even though the vendors table is object table it will not show the adt along with
data, to see the data along with the adt
SQL>Select * from vendors;
This will give the data without adt.
SQL>Select value(v) from vendors v;
This will give the columns data along wih the type.

REF CONSTRAINTS
 Ref can also acts as constraint.
 Even though vendors1 also holding vendor_adt, the orders table will store the object
ids of vendors only because it is constrained to that table only.
 The vendor_info column in the following syntaxes will store object ids of vendors only.

SQL> Create table orders (order_no number(2), vendor_info ref vendor_adt scope is vendors);
Or
SQL> Create table orders (order_no number(2), vendor_info ref vendor_adt constraint fk
references vendors);

OBJECT VIEWS WITH REFERENCES

© Copy rights are reserved.

 60
To implement the objects and the ref constraints to the existing tables, what we can do? Simply
drop the both tables and recreate with objects and ref constrains.
But you can achieve this with out dropping the tables and without losing the data by creating
object views with references.

Ex:
a) Create the following tables
SQL> Create table student1(no number(2) primary key,name varchar(2),marks
number(3));
SQL> Create table student2(no number(2) primary key,hno number(3),city
varchar(10),id number(2),foreign Key(id) references student1(no));
b) Insert the records into both tables
SQL> insert into student1(1,’a’,100);
SQL> insert into student1(2,’b’,200);
SQL> insert into student2(11,111,’hyd’,1);
SQL> insert into student2(12,222,’bang’,2);
SQL> insert into student2(13,333,’bombay’,1);
c) Create the type
SQL> create or replace type stud as object(no number(2),name varchar(2),marks
number(3));/
d) Generating OIDs
SQL> Create or replace view student1_ov of stud with object identifier(or id) (no) as
Select * from Student1;
e) Generating references
SQL> Create or replace view student2_ov as select no,hno,city,
make_ref(student1_ov,id) id from Student2;
d) Query the following
SQL> select *from student1_ov;
SQL> select ref(s) from student1_ov s;
SQL> select values(s) from student1_ov;
SQ> select *from student2_ov;
SQL> select deref(s.id) from student2_ov s;

PARTITIONS

© Copy rights are reserved.

 61
A single logical table can be split into a number of physically separate pieces based on ranges of
key values. Each of the parts of the table is called a partition.
A non-partitioned table can not be partitioned later.
TYPES
 Range partitions
 List partitions
 Hash partitions
 Sub partitions
ADVANTAGES
 Reducing downtime for scheduled maintenance, which allows maintenance operations to
be carried out on selected partitions while other partitions are available to users.
 Reducing downtime due to data failure, failure of a particular partition will no way affect
other partitions.
 Partition independence allows for concurrent use of the various partitions for various
purposes.
ADVANTAGES OF PARTITIONS BY STORING THEM IN DIFFERENT TABLESPACES
 Reduces the possibility of data corruption in multiple partitions.
 Back up and recovery of each partition can be done independently.
DISADVANTAGES
 Partitioned tables cannot contain any columns with long or long raw datatypes, LOB types
or object types.

RANGE PARTITIONS
a) Creating range partitioned table
SQL> Create table student(no number(2),name varchar(2)) partition by range(no)
(partition p1 values less than(10), partition p2 values less than(20), partition p3
values less than(30),partition p4 values less than(maxvalue));
** if you are using maxvalue for the last partition, you can not add a partition.
b) Inserting records into range partitioned table
SQL> Insert into student values(1,’a’); -- this will go to p1
SQL> Insert into student values(11,’b’); -- this will go to p2
SQL> Insert into student values(21,’c’); -- this will go to p3
SQL> Insert into student values(31,’d’); -- this will go to p4
c) Retrieving records from range partitioned table
SQL> Select *from student;
SQL> Select *from student partition(p1);
d) Possible operations with range partitions
 Add
© Copy rights are reserved.
 62
 Drop
 Truncate
 Rename
 Split
 Move
 Exchange

e) Adding a partition
SQL> Alter table student add partition p5 values less than(40);
f) Dropping a partition
SQL> Alter table student drop partition p4;
g) Renaming a partition
SQL> Alter table student rename partition p3 to p6;
h) Truncate a partition
SQL> Alter table student truncate partition p6;
i) Splitting a partition
SQL> Alter table student split partition p2 at(15) into (partition p21,partition p22);
j) Exchanging a partition
SQL> Alter table student exchange partition p1 with table student2;
k) Moving a partition
SQL> Alter table student move partition p21 tablespace saketh_ts;

LIST PARTITIONS
a) Creating list partitioned table
SQL> Create table student(no number(2),name varchar(2)) partition by list(no)
(partition p1 values(1,2,3,4,5), partition p2 values(6,7,8,9,10),partition p3
values(11,12,13,14,15), partition p4 values(16,17,18,19,20));
b) Inserting records into list partitioned table
SQL> Insert into student values(1,’a’); -- this will go to p1
SQL> Insert into student values(6,’b’); -- this will go to p2
SQL> Insert into student values(11,’c’); -- this will go to p3
SQL> Insert into student values(16,’d’); -- this will go to p4
c) Retrieving records from list partitioned table
SQL> Select *from student;
SQL> Select *from student partition(p1);
d) Possible operations with list partitions
 Add
© Copy rights are reserved.
 63
 Drop
 Truncate
 Rename
 Move
 Exchange
e) Adding a partition
SQL> Alter table student add partition p5 values(21,22,23,24,25);

f) Dropping a partition
SQL> Alter table student drop partition p4;
g) Renaming a partition
SQL> Alter table student rename partition p3 to p6;
h) Truncate a partition
SQL> Alter table student truncate partition p6;
i) Exchanging a partition
SQL> Alter table student exchange partition p1 with table student2;
j) Moving a partition
SQL> Alter table student move partition p2 tablespace saketh_ts;

HASH PARTITIONS
a) Creating hash partitioned table
SQL> Create table student(no number(2),name varchar(2)) partition by hash(no)
partitions 5;
Here oracle automatically gives partition names like
SYS_P1
SYS_P2
SYS_P3
SYS_P4
SYS_P5
b) Inserting records into hash partitioned table
it will insert the records based on hash function calculated by taking the partition key
SQL> Insert into student values(1,’a’);
SQL> Insert into student values(6,’b’);
SQL> Insert into student values(11,’c’);
SQL> Insert into student values(16,’d’);
c) Retrieving records from hash partitioned table
SQL> Select *from student;
SQL> Select *from student partition(sys_p1);
© Copy rights are reserved.
 64
d) Possible operations with hash partitions
 Add
 Truncate
 Rename
 Move
 Exchange
e) Adding a partition
SQL> Alter table student add partition p6 ;
f) Renaming a partition
SQL> Alter table student rename partition p6 to p7;
g) Truncate a partition
SQL> Alter table student truncate partition p7;
h) Exchanging a partition
SQL> Alter table student exchange partition sys_p1 with table student2;
i) Moving a partition
SQL> Alter table student move partition sys_p2 tablespace saketh_ts;

SUB-PARTITIONS WITH RANGE AND HASH

Subpartitions clause is used by hash only. We can not create subpartitions with list and hash
partitions.
a) Creating subpartitioned table
SQL> Create table student(no number(2),name varchar(2),marks number(3))
Partition by range(no) subpartition by hash(name) subpartitions 3
(Partition p1 values less than(10),partition p2 values less than(20));
This will create two partitions p1 and p2 with three subpartitions for each partition
P1 – SYS_SUBP1
SYS_SUBP2
SYS_SUBP3
P2 – SYS_SUBP4
SYS_SUBP5
SYS_SUBP6
** if you are using maxvalue for the last partition, you can not add a partition.
b) Inserting records into subpartitioned table
SQL> Insert into student values(1,’a’); -- this will go to p1
SQL> Insert into student values(11,’b’); -- this will go to p2
c) Retrieving records from subpartitioned table
SQL> Select *from student;
SQL> Select *from student partition(p1);

© Copy rights are reserved.

 65
SQL> Select *from student subpartition(sys_subp1);
d) Possible operations with subpartitions
 Add
 Drop
 Truncate
 Rename
 Split

e) Adding a partition
SQL> Alter table student add partition p3 values less than(30);
f) Dropping a partition
SQL> Alter table student drop partition p3;
g) Renaming a partition
SQL> Alter table student rename partition p2 to p3;
h) Truncate a partition
SQL> Alter table student truncate partition p1;
i) Splitting a partition
SQL> Alter table student split partition p3 at(15) into (partition p31,partition p32);

DATA MODEL

 ALL_IND_PARTITIONS
 ALL_IND_SUBPARTITIONS
 ALL_TAB_PARTITIONS
 ALL_TAB_SUBPARTITIONS
 DBA_IND_PARTITIONS
 DBA_IND_SUBPARTITIONS
 DBA_TAB_PARTITIONS
 DBA_TAB_SUBPARTITIONS
 USER_IND_PARTITIONS
 USER_IND_SUBPARTITIONS
 USER_TAB_PARTITIONS
 USER_TAB_SUBPARTITIONS

GROUP BY AND HAVING

GROUP BY
Using group by, we can create groups of related information.

© Copy rights are reserved.

 66
Columns used in select must be used with group by, otherwise it was not a group by expression.
Ex:
SQL> select deptno, sum(sal) from emp group by deptno;
DEPTNO SUM(SAL)
---------- ----------
10 8750
20 10875
30 9400
SQL> select deptno,job,sum(sal) from emp group by deptno,job;
DEPTNO JOB SUM(SAL)
---------- --------- ----------
10 CLERK 1300
10 MANAGER 2450
10 PRESIDENT 5000
20 ANALYST 6000
20 CLERK 1900
20 MANAGER 2975
30 CLERK 950
30 MANAGER 2850
30 SALESMAN 5600

HAVING
This will work as where clause which can be used only with group by because of absence of
where clause in group by.
Ex: select deptno,job,sum(sal) tsal from emp group by deptno,job having sum(sal) >3000;
DEPTNO JOB TSAL
---------- --------- ----------
10 PRESIDENT 5000
20 ANALYST 6000
30 SALESMAN 5600
SQL> select deptno,job,sum(sal) tsal from emp group by deptno,job having sum(sal) >
3000 order by job;
DEPTNO JOB TSAL
---------- --------- ----------
20 ANALYST 6000
10 PRESIDENT 5000
30 SALESMAN 5600
ORDER OF EXECUTION
© Copy rights are reserved.
 67
 Group the rows together based on group by clause.
 Calculate the group functions for each group.
 Choose and eliminate the groups based on the having clause.
 Order the groups based on the specified column.

ROLLUP GROUPING CUBE

These are the enhancements to the group by feature.

USING ROLLUP
This will give the salaries in each department in each job category along wih the total salary for
individual departments and the total salary of all the departments.
SQL> Select deptno,job,sum(sal) from emp group by rollup(deptno,job);
DEPTNO JOB SUM(SAL)
---------- --------- ----------
10 CLERK 1300
10 MANAGER 2450
10 PRESIDENT 5000
10 8750
20 ANALYST 6000
20 CLERK 1900
20 MANAGER 2975
20 10875
30 CLERK 950
30 MANAGER 2850
30 SALESMAN 5600
30 9400
29025
USING GROUPING
In the above query it will give the total salary of the individual departments but with a
blank in the job column and gives the total salary of all the departments with blanks in
deptno and job columns.
To replace these blanks with your desired string grouping will be used
SQL> select decode(grouping(deptno),1,'All Depts',deptno),decode(grouping(job),1,'All
jobs',job),sum(sal) from emp group by rollup(deptno,job);

© Copy rights are reserved.

 68
DECODE(GROUPING(DEPTNO),1,'ALLDEPTS',DEP DECODE(GR SUM(SAL)
----------------------------------- ---------------------------------- --------------
10 CLERK 1300
10 MANAGER 2450
10 PRESIDENT 5000
10 All jobs 8750
20 ANALYST 6000
20 CLERK 1900
20 MANAGER 2975
20 All jobs 10875
30 CLERK 950
30 MANAGER 2850
30 SALESMAN 5600
30 All jobs 9400
All Depts All jobs 29025

Grouping will return 1 if the column which is specified in the grouping function has been
used in rollup.
Grouping will be used in association with decode.

USING CUBE
This will give the salaries in each department in each job category, the total salary for individual
departments, the total salary of all the departments and the salaries in each job category.
SQL> select decode(grouping(deptno),1,’All Depts’,deptno),decode(grouping(job),1,’All
Jobs’,job),sum(sal) from emp group by cube(deptno,job);
DECODE(GROUPING(DEPTNO),1,'ALLDEPTS',DEP DECODE(GR SUM(SAL)
----------------------------------- ------------------------------------ ------------
10 CLERK 1300
10 MANAGER 2450
10 PRESIDENT 5000
10 All Jobs 8750
20 ANALYST 6000
20 CLERK 1900
20 MANAGER 2975
20 All Jobs 10875
30 CLERK 950
30 MANAGER 2850
30 SALESMAN 5600
© Copy rights are reserved.
 69
30 All Jobs 9400
All Depts ANALYST 6000
All Depts CLERK 4150
All Depts MANAGER 8275
All Depts PRESIDENT 5000
All Depts SALESMAN 5600
All Depts All Jobs 29025

SET OPERATORS

TYPES
 Union
 Union all
 Intersect
 Minus

UNION
This will combine the records of multiple tables having the same structure.
Ex: SQL> select * from student1 union select * from student2;

UNION ALL
This will combine the records of multiple tables having the same structure but including
duplicates.
Ex: SQL> select * from student1 union all select * from student2;

INTERSECT
This will give the common records of multiple tables having the same structure.
Ex: SQL> select * from student1 intersect select * from student2;

MINUS
This will give the records of a table whose records are not in other tables having the same
structure.
Ex: SQL> select * from student1 minus select * from student2;

VIEWS

© Copy rights are reserved.

 70
A view is a database object that is a logical representation of a table. It is delivered from a table
but has no storage of its own and often may be used in the same manner as a table.
A view takes the output of the query and treats it as a table, therefore a view can be thought of
as a stored query or a virtual table.
TYPES
 Simple view
 Complex view
Simple view can be created from one table where as complex view can be created from multiple
tables.
WHY VIEWS?
 Provides additional level of security by restricting acess to a predetermined set of rows
and/or columns of a table.
 Hide the data complexity.
 Simplify commands for the user.
VIEWS WITHOUT DML
 Read only view
 View with group by
 View with aggregate functions
 View with rownum
 Partition view
 View with distinct
Ex:
SQL> Create view dept_v as select *from dept with read only;
SQL> Create view dept_v as select deptno, sum(sal) t_sal from emp group by deptno;
SQL> Create view stud as select rownum no, name, marks from student;
SQL> Create view student as select *from student1 union select *from student2;
SQL> Create view stud as select distinct no,name from student;
VIEWS WITH DML
 View with not null column -- insert with out not null column not possible
-- update not null column to null is not possible
-- delete possible
 View with out not null column which was in base table -- insert not possible
-- update, delete possible
 View with expression -- insert , update not possible
-- delete possible
 View with functions (except aggregate) -- insert, update not possible
-- delete possible

© Copy rights are reserved.

 71
 View was created but the underlying table was dropped then we will get the message like
“ view has errors ”.
 View was created but the base table has been altered but still the view was with the initial
definition, we have to replace the view to affect the changes.
 Complex view (view with more than one table) -- insert not possible
-- update, delete possible (not always)

CREATING VIEW WITHOUT HAVING THE BASE TABLE

SQL> Create force view stud as select *From student;
-- Once the base table was created then the view is validated.
VIEW WITH CHECK OPTION CONSTRAINT
SQL> Create view stud as select *from student where marks = 500 with check option
constraint Ck;
- Insert possible with marks value as 500
- Update possible excluding marks column
- Delete possible

DROPPING VIEWS
SQL> drop view dept_v;

DATA MODEL
ALL_VIEW
DBA_VIEW
USER_VIEWS

SYNONYM AND SEQUENCE

SYNONYM
A synonym is a database object, which is used as an alias for a table, view or sequence.
TYPES

 Private
 Public
Private synonym is available to the particular user who creates.
Public synonym is created by DBA which is available to all the users.
ADVANTAGES

 Hide the name and owner of the object.

 Provides location transparency for remote objects of a distributed database.

© Copy rights are reserved.

 72
CREATE AND DROP

SQL> create synonym s1 for emp;

SQL> create public synonym s2 for emp;
SQL> drop synonym s1;
SEQUENCE
A sequence is a database object, which can generate unique, sequential integer values.
It can be used to automatically generate primary key or unique key values.
A sequence can be either in an ascending or descending order.

Syntax:
Create sequence <seq_name> [increment by n] [start with n] [maxvalue n]
[minvalue n] [cycle/nocycle] [cache/nocache];
By defalult the sequence starts with 1, increments by 1 with minvalue of 1 and with nocycle,
nocache.
Cache option pre-alloocates a set of sequence numbers and retains them in memory for faster
access.
Ex:
SQL> create sequence s;
SQL> create sequence s increment by 10 start with 100 minvalue 5 maxvalue 200 cycle
cache 20;
USING SEQUENCE

SQL> create table student(no number(2),name varchar(10));

SQL> insert into student values(s.nextval, ‘saketh’);
 Initially currval is not defined and nextval is starting value.
 After that nextval and currval are always equal.
CREATING ALPHA-NUMERIC SEQUENCE

SQL> create sequence s start with 111234;

SQL> Insert into student values (s.nextval || translate
(s.nextval,’1234567890’,’abcdefghij’));
ALTERING SEQUENCE

We can alter the sequence to perform the following.

 Set or eliminate minvalue or maxvalue.
 Change the increment value.
 Change the number of cached sequence numbers.
Ex:
SQL> alter sequence s minvalue 5;
SQL> alter sequence s increment by 2;

© Copy rights are reserved.

 73
SQL> alter sequence s cache 10;

DROPPING SEQUENCE

SQL> drop sequence s;

JOINS
 The purpose of a join is to combine the data across tables.
 A join is actually performed by the where clause which combines the specified rows of
tables.
 If a join involves in more than two tables then oracle joins first two tables based on the
joins condition and then compares the result with the next table and so on.
TYPES
Equi join
Non-equi join
Self join
Natural join
Cross join
Outer join
 Left outer
 Right outer
 Full outer
Inner join
Using clause
On clause
Assume that we have the following tables.

SQL> select * from dept;

DEPTNO DNAME LOC
------ ---------- ----------
10 mkt hyd
20 fin bang
30 hr bombay
© Copy rights are reserved.
 74

SQL> select * from emp;

EMPNO ENAME JOB MGR DEPTNO

---------- ---------- ---------- ---------- ----------
111 saketh analyst 444 10
222 sudha clerk 333 20
333 jagan manager 111 10
444 madhu engineer 222 40

EQUI JOIN
A join which contains an ‘=’ operator in the joins condition.
Ex: SQL> select empno,ename,job,dname,loc from emp e,dept d where e.deptno=d.deptno;
EMPNO ENAME JOB DNAME LOC
---------- ---------- ---------- ---------- ----------
111 saketh analyst mkt hyd
333 jagan manager mkt hyd
222 sudha clerk fin bang
USING CLAUSE
SQL> select empno,ename,job ,dname,loc from emp e join dept d using(deptno);

EMPNO ENAME JOB DNAME LOC

---------- ---------- ---------- ---------- ----------
111 saketh analyst mkt hyd
333 jagan manager mkt hyd
222 sudha clerk fin bang
ON CLAUSE
SQL> select empno,ename,job,dname,loc from emp e join dept d on(e.deptno=d.deptno);
EMPNO ENAME JOB DNAME LOC
---------- ---------- ---------- ---------- ----------
111 saketh analyst mkt hyd
333 jagan manager mkt hyd
222 sudha clerk fin bang
NON-EQUI JOIN
A join which contains an operator other than ‘=’ in the joins condition.
Ex: select empno,ename,job,dname,loc from emp e,dept d where e.deptno > d.deptno;
EMPNO ENAME JOB DNAME LOC
© Copy rights are reserved.
 75
---------- ---------- ---------- ---------- ----------
222 sudha clerk mkt hyd
444 madhu engineer mkt hyd
444 madhu engineer fin bang
444 madhu engineer hr bombay
SELF JOIN
Joining the table itself is called self join.
Ex: select e1.empno,e2.ename,e1.job,e2.deptno from emp e1,emp e2 where e1.empno=e2.mgr;
EMPNO ENAME JOB DEPTNO
---------- ---------- ---------- ----------
111 jagan analyst 10
NATURAL JOIN
Natural join compares all the common columns.
Ex: SQL> select empno,ename,job,dname,loc from emp natural join dept;
EMPNO ENAME JOB DNAME LOC
---------- ---------- ---------- ---------- ----------
111 saketh analyst mkt hyd
333 jagan manager mkt hyd
222 sudha clerk fin bang
CROSS JOIN
This will gives the cross product.
Ex: SQL> select empno,ename,job,dname,loc from emp cross join dept;
EMPNO ENAME JOB DNAME LOC
---------- ---------- ---------- ---------- ----------
111 saketh analyst mkt hyd
222 sudha clerk mkt hyd
333 jagan manager mkt hyd
444 madhu engineer mkt hyd
111 saketh analyst fin bang
222 sudha clerk fin bang
333 jagan manager fin bang
444 madhu engineer fin bang
111 saketh analyst hr bombay
222 sudha clerk hr bombay
333 jagan manager hr bombay
444 madhu engineer hr bombay
OUTER JOIN
Outer join gives the non-matching records along with matching records.
© Copy rights are reserved.
 76

LEFT OUTER JOIN

This will display the all matching records and the records which are in left hand side table those
that are not in right hand side table.
Ex: select empno,ename,job,dname,loc from emp e left outer join dept d on(e.deptno=d.deptno);
Or
select empno,ename,job,dname,loc from emp e,dept d where e.deptno=d.deptno(+);
EMPNO ENAME JOB DNAME LOC
---------- ---------- ---------- ---------- ----------
111 saketh analyst mkt hyd
333 jagan manager mkt hyd
RIGHT OUTER JOIN

This will display the all matching records and the records which are in right hand side table those
that are not in left hand side table.
Ex: select empno,ename,job,dname,loc from emp e right outer join dept d
on(e.deptno=d.deptno);
Or
SQL> select empno,ename,job,dname,loc from emp e,dept d where e.deptno(+) =
d.deptno;
EMPNO ENAME JOB DNAME LOC
---------- ---------- ---------- ---------- ----------
111 saketh analyst mkt hyd
333 jagan manager mkt hyd
222 sudha clerk fin bang
hr bombay
FULL OUTER JOIN

This will display the all matching records and the non-matching records from both tables.
Ex:
SQL> select empno,ename,job,dname,loc from emp e full outer join dept d
on(e.deptno=d.deptno);
EMPNO ENAME JOB DNAME LOC
---------- ---------- ---------- ---------- ----------
333 jagan manager mkt hyd
111 saketh analyst mkt hyd
222 sudha clerk fin bang
444 madhu engineer
hr bombay
INNER JOIN

© Copy rights are reserved.

 77
This will display all the records that have matched.
Ex:select empno,ename,job,dname,loc from emp inner join dept using(deptno);
EMPNO ENAME JOB DNAME LOC
---------- ---------- ---------- ---------- ----------
111 saketh analyst mkt hyd
333 jagan manager mkt hyd
222 sudha clerk fin bang

SUBQUERIES AND EXISTS

SUBQUERIES

 Nesting of queries, one within the other is termed as a subquery.

 A statement containing a subquery is called a parent query.
 Subqueries are used to retrieve data from tables that depend on the values in the table
itself.
TYPES

 Single row subqueries

 Multi row subqueries
 Multiple subqueries
 Correlated subqueries

SINGLE ROW SUBQUERIES

In single row subquery, it will return one value.

Ex: SQL> select * from emp where sal > (select sal from emp where empno = 7566);
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
---------- ---------- --------- ---------- ------------ ------- ---------- ----------
7788 SCOTT ANALYST 7566 19-APR-87 3000 20
7839 KING PRESIDENT 17-NOV-81 5000 10
7902 FORD ANALYST 7566 03-DEC-81 3000 20
MULTI ROW SUBQUERIES

In multi row subquery, it will return more than one value. In such cases we should include
operators like any, all, in or not in between the comparision operator and the subquery.
Ex: select * from emp where sal > any (select sal from emp where sal between 2500 and 4000);
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
---------- ---------- --------- ---------- ----------- -------- ---------- ----------
© Copy rights are reserved.
 78
7566 JONES MANAGER 7839 02-APR-81 2975 20
7788 SCOTT ANALYST 7566 19-APR-87 3000 20
7839 KING PRESIDENT 17-NOV-81 5000 10
7902 FORD ANALYST 7566 03-DEC-81 3000 20
select * from emp where sal > all (select sal from emp where sal between 2500 and 4000);
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
---------- ---------- --------- ---------- ------------- ------ ---------- ----------
7839 KING PRESIDENT 17-NOV-81 5000 10

MULTIPLE SUBQUERIES

There is no limit on the number of subqueries included in a where clause. It allows nesting of a
query within a subquery.
Ex: SQL> select * from emp where sal = (select max(sal) from emp where sal < (select
max(sal) from emp));
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
---------- ---------- --------- ---------- ------------ ------- ---------- ----------
7788 SCOTT ANALYST 7566 19-APR-87 3000 20
7902 FORD ANALYST 7566 03-DEC-81 3000 20
CORRELATED SUBQUERIES

A subquery is evaluated once for the entire parent statement where as a correlated subquery is
evaluated once for every row processed by the parent statement.
Ex: SQL> select distinct deptno from emp e where 5 <= (select count(ename) from emp
where e.deptno = deptno);
DEPTNO
----------
20
30

EXISTS
Exists function is a test for existence. This is a logical test for the return of rows from a query.
Ex:
Suppose we want to display the department numbers which has more than 4
employees.
SQL> select deptno,count(*) from emp group by deptno having count(*) > 4;
DEPTNO COUNT(*)
--------- ----------

© Copy rights are reserved.

 79
20 5
30 6
From the above query can you want to display the names of employees?
SQL> select deptno,ename, count(*) from emp group by deptno,ename having count(*)
> 4;
no rows selected
The above query returns nothing because combination of deptno and ename never
return more than one count.
The solution is to use exists which follows.

SQL> select deptno,ename from emp e1 where exists (select * from emp e2
where e1.deptno=e2.deptno group by e2.deptno having count(e2.ename) > 4)
order by deptno,ename;
DEPTNO ENAME
---------- ----------
20 ADAMS
20 FORD
20 JONES
20 SCOTT
20 SMITH
30 ALLEN
30 BLAKE
30 JAMES
30 MARTIN
30 TURNER
30 WARD
NOT EXISTS
SQL> select deptno,ename from emp e1 where not exists (select * from emp e2
where e1.deptno=e2.deptno group by e2.deptno having count(e2.ename) > 4) order
by deptno,ename;
DEPTNO ENAME
--------- ----------
10 CLARK
10 KING
10 MILLER

© Copy rights are reserved.

 80

WALKUP TREES AND INLINE VIEW

WALKUP TREES
Using hierarchical queries, you can retrieve data based on a natural hierarchical relationship
between rows in a table. However, where a hierarchical relationship exists between the rows of
a table, a process called tree walking enables the hierarchy to be constructed.
Ex: SQL> select ename || '==>' || prior ename, level from emp start with ename = 'KING'
connect by prior empno=mgr;
ENAME||'==>'||PRIORENAM LEVEL
------------------------------------ --------
KING==> 1
JONES==>KING 2
SCOTT==>JONES 3
ADAMS==>SCOTT 4
FORD==>JONES 3
SMITH==>FORD 4
BLAKE==>KING 2
ALLEN==>BLAKE 3
WARD==>BLAKE 3
MARTIN==>BLAKE 3
TURNER==>BLAKE 3
JAMES==>BLAKE 3
CLARK==>KING 2
MILLER==>CLARK 3
In the above
Start with clause specifies the root row of the table.
Level pseudo column gives the 1 for root , 2 for child and so on.
Connect by prior clause specifies the columns which has parent-child relationship.

INLINE VIEW OR TOP-N ANALYSIS

In the select statement instead of table name, replacing the select statement is known as inline
view.
Ex: SQL> Select ename, sal, rownum rank from (select *from emp order by sal);

ENAME SAL RANK

---------- ---------- ----------
SMITH 800 1

© Copy rights are reserved.

 81
JAMES 950 2
ADAMS 1100 3
WARD 1250 4
MARTIN 1250 5
MILLER 1300 6
TURNER 1500 7
ALLEN 1600 8
CLARK 2450 9
BLAKE 2850 10
JONES 2975 11
SCOTT 3000 12
FORD 3000 13

LOCKS
Locks are the mechanisms used to prevent destructive interaction between users accessing same
resource simultaneously. Locks provides high degree of data concurrency.
TYPES
 Row level locks
 Table level locks
ROW LEVEL LOCKS
In the row level lock a row is locked exclusively so that other cannot modify the row until the
transaction holding the lock is committed or rolled back. This can be done by using select..for
update clause.
Ex: SQL> select * from emp where sal > 3000 for update of comm.;
TABLE LEVEL LOCKS
A table level lock will protect table data thereby guaranteeing data integrity when data is being
accessed concurrently by multiple users. A table lock can be held in several modes.
 Share lock
 Share update lock
 Exclusive lock
SHARE LOCK

A share lock locks the table allowing other users to only query but not insert, update or delete
rows in a table. Multiple users can place share locks on the same resource at the same time.
Ex: SQL> lock table emp in share mode;
SHARE UPDATE LOCK

It locks rows that are to be updated in a table. It permits other users to concurrently query,
insert , update or even lock other rows in the same table. It prevents the other users from
updating the row that has been locked.
Ex: SQL> lock table emp in share update mode;
© Copy rights are reserved.
 82
EXCLUSIVE LOCK

Exclusive lock is the most restrictive of tables locks. When issued by any user, it allows the other
user to only query. It is similar to share lock but only one user can place exclusive lock on a table
at a time.
Ex: SQL> lock table emp in share exclusive mode;
NOWAIT
If one user locked the table without nowait then another user trying to lock the same table then
he has to wait until the user who has initially locked the table issues a commit or rollback
statement. This delay could be avoided by appending a nowait clause in the lock table command.

Ex: SQL> lock table emp in exclusive mode nowait.

DEADLOCK

A deadlock occurs when tow users have a lock each on separate object, and they want to acquire
a lock on the each other’s object. When this happens, the first user has to wait for the second
user to release the lock, but the second user will not release it until the lock on the first user’s
object is freed. In such a case, oracle detects the deadlock automatically and solves the problem
by aborting one of the two transactions.

INDEXES
Index is typically a listing of keywords accompanied by the location of information on a subject.
We can create indexes explicitly to speed up SQL statement execution on a table. The index
points directly to the location of the rows containing the value.
WHY INDEXES?
Indexes are most useful on larger tables, on columns that are likely to appear in where clauses
as simple equality.
TYPES
 Unique index
 Non-unique index
 Btree index
 Bitmap index
 Composite index
 Reverse key index
 Function-based index
 Descending index
 Domain index

© Copy rights are reserved.

 83
 Object index
 Cluster index
 Text index
 Index organized table
 Partition index
 Local index
 Local prefixed
 Local non-prefixed
 Global index
 Global prefixed
 Global non-prefixed

UNIQUE INDEX
Unique indexes guarantee that no two rows of a table have duplicate values in the columns that
define the index. Unique index is automatically created when primary key or unique constraint is
created.
Ex: SQL> create unique index stud_ind on student(sno);
NON-UNIQUE INDEX
Non-Unique indexes do not impose the above restriction on the column values.
Ex: SQL> create index stud_ind on student(sno);
BTREE INDEX or ASCENDING INDEX
The default type of index used in an oracle database is the btree index. A btree index is designed
to provide both rapid access to individual rows and quick access to groups of rows within a
range. The btree index does this by performing a succession of value comparisons. Each
comparison eliminates many of the rows.
Ex: SQL> create index stud_ind on student(sno);
BITMAP INDEX
This can be used for low cardinality columns: that is columns in which the number of distinct
values is snall when compared to the number of the rows in the table.
Ex: SQL> create bitmap index stud_ind on student(sex);
COMPOSITE INDEX
A composite index also called a concatenated index is an index created on multiple columns of a
table. Columns in a composite index can appear in any order and need not be adjacent columns
of the table.
Ex: SQL> create index stud_ind on student(sno, sname);
REVERSE KEY INDEX
A reverse key index when compared to standard index, reverses each byte of the column being
indexed while keeping the column order. When the column is indexed in reverse mode then the
© Copy rights are reserved.
 84
column values will be stored in an index in different blocks as the starting value differs. Such an
arrangement can help avoid performance degradations in indexes where modifications to the
index are concentrated on a small set of blocks.
Ex: SQL> create index stud_ind on student(sno, reverse);
We can rebuild a reverse key index into normal index using the noreverse keyword.
Ex: SQL> alter index stud_ind rebuild noreverse;
FUNCTION BASED INDEX
This will use result of the function as key instead of using column as the value for the key.
Ex: SQL> create index stud_ind on student(upper(sname));

DESCENDING INDEX
The order used by B-tree indexes has been ascending order. You can categorize data in B-tree
index in descending order as well. This feature can be useful in applications where sorting
operations are required.
Ex: SQL> create index stud_ind on student(sno desc);
TEXT INDEX
Querying text is different from querying data because words have shades of meaning,
relationships to other words, and opposites. You may want to search for words that are near
each other, or words that are related to others. These queries would be extremely difficult if all
you had available was the standard relational operators. By extending SQL to include text
indexes, oracle text permits you to ask very complex questions about the text.
To use oracle text, you need to create a text index on the column in which the text is stored. Text
index is a collection of tables and indexes that store information about the text stored in the
column.
TYPES

There are several different types of indexes available in oracle 9i. The first, CONTEXT is supported
in oracle 8i as well as oracle 9i. As of oracle 9i, you can use the CTXCAT text index fo further
enhance your text index management and query capabilities.

 CONTEXT
 CTXCAT
 CTXRULE

The CTXCAT index type supports the transactional synchronization of data between the base table
and its text index. With CONTEXT indexes, you need to manually tell oracle to update the values in

© Copy rights are reserved.

 85
the text index after data changes in base table. CTXCAT index types do not generate score values
during the text queries.

HOW TO CREATE TEXT INDEX?

You can create a text index via a special version of the create index comman. For context index,
specify the ctxsys.context index type and for ctxcat index, specify the ctxsys.ctxcat index type.
Ex:
Suppose you have a table called BOOKS with the following columns
Title, Author, Info.
SQL> create index book_index on books(info) indextype is ctxsys.context;
SQL> create index book_index on books(info) indextype is ctxsys.ctxcat;
TEXT QUERIES

Once a text index is created on the info column of BOOKS table, text-searching capabilities
increase dynamically.
CONTAINS & CATSEARCH

CONTAINS function takes two parameters – the column name and the search string.
Syntax: Contains(indexed_column, search_str);
If you create a CTXCAT index, use the CATSEARCH function in place of CONTAINS. CATSEARCH takes
three parameters – the column name, the search string and the index set.
Syntax: catsearch (indexed_column, search_str, index_set);

HOW A TEXT QEURY WORKS?

When a function such as CONTAINS or CATSEARCH is used in query, the text portion of the query is
processed by oracle text. The remainder of the query is processed just like a regular query within
the database. The result of the text query processing and the regular query processing are
merged to return a single set of records to the user.
SEARCHING FOR AN EXACT MATCH OF A WORD

The following queries will search for a word called ‘prperty’ whose score is greater than zero.
SQL> select * from books where contains(info, ‘property’) > 0;
SQL> select * from books where catsearch(info, ‘property’, null) > 0;
Suppose if you want to know the score of the ‘property’ in each book, if score values for
individual searches range from 0 to 10 for each occurrence of the string within the text then use
the score function.
SQL> select title, score(10) from books where contains(info, ‘property’, 10) > 0;
SEARCHING FOR AN EXACT MATCH OF MULTIPLE WORDS

The following queries will search for two words.

SQL> select * from books where contains(info, ‘property AND harvests’) > 0;
SQL> select * from books where catsearch(info, ‘property AND harvests’, null) > 0;

© Copy rights are reserved.

 86
Instead of using AND you could hae used an ampersand(&). Before using this method, set define
off so the & character will not be seen as part of a variable name.
SQL> set define off
SQL> select * from books where contains(info, ‘property & harvests’) > 0;
SQL> select * from books where catsearch(info, ‘property harvests’, null) > 0;
The following queries will search for more than two words.
SQL> select * from books where contains(info, ‘property AND harvests AND workers’) > 0;
SQL> select * from books where catsearch(info, ‘property harvests workers’, null) > 0;
The following queries will search for either of the two words.
SQL> select * from books where contains(info, ‘property OR harvests’) > 0;
Instead of OR you can use a vertical line (|).
SQL> select * from books where contains(info, ‘property | harvests’) > 0;
SQL> select * from books where catsearch(info, ‘property | harvests’, null) > 0;

In the following queries the ACCUM(accumulate) operator adds together the scores of the
individual searches and compares the accumulated score to the threshold value.
SQL> select * from books where contains(info, ‘property ACCUM harvests’) > 0;
SQL> select * from books where catsearch(info, ‘property ACCUM harvests’, null) > 0;
Instead of OR you can use a comma(,).
SQL> select * from books where contains(info, ‘property , harvests’) > 0;
SQL> select * from books where catsearch(info, ‘property , harvests’, null) > 0;
In the following queries the MINUS operator subtracts the score of the second term’s search from
the score of the first term’s search.
SQL> select * from books where contains(info, ‘property MINUS harvests’) > 0;
SQL> select * from books where catsearch(info, ‘property NOT harvests’, null) > 0;
Instead of MINUS you can use – and instead of NOT you can use ~.
SQL> select * from books where contains(info, ‘property - harvests’) > 0;
SQL> select * from books where catsearch(info, ‘property ~ harvests’, null) > 0;

SEARCHING FOR AN EXACT MATCH OF A PHRASE

The following queries will search for the phrase. If the search phrase includes a reserved word
within oracle text, the you must use curly braces ({}) to enclose text.
SQL> select * from books where contains(info, ‘transactions {and} finances’) > 0;
SQL> select * from books where catsearch(info, ‘transactions {and} finances’, null) > 0;
You can enclose the entire phrase within curly braces, in which case any reserved words within
the phrase will be treated as part of the search criteria.
SQL> select * from books where contains(info, ‘{transactions and finances}’) > 0;
SQL> select * from books where catsearch(info, ‘{transactions and finances}’, null) > 0;
© Copy rights are reserved.
 87

SEARCHING FOR WORDS THAT ARE NEAR EACH OTHER

The following queries will search for the words that are in between the search terms.
SQL> select * from books where contains(info, ‘workers NEAR harvests’) > 0;
Instead of NEAR you can use ;.
SQL> select * from books where contains(info, ‘workers ; harvests’) > 0;
In CONTEXT index queries, you can specify the maximum number of words between the search
terms.
SQL> select * from books where contains(info, ‘NEAR((workers, harvests),10)’ > 0;

USING WILDCARDS DURING SEARCHES

You can use wildcards to expand the list of valid search terms used during your query. Just as in
regular text-string wildcard processing, two wildcards are available.

% - percent sign; multiple-character wildcard

_ - underscore; single-character wildcard
SQL> select * from books where contains(info, ‘worker%’) > 0;
SQL> select * from books where contains(info, ‘work___’) > 0;
SEARCHING FOR WORDS THAT SHARE THE SAME STEM

Rather than using wildcards, you can use stem-expansion capabilities to expand the list of text
strings. Given the ‘stem’ of a word, oracle will expand the list of words to search for to include
all words having the same stem. Sample expansions are show here.
Play - plays playing played playful
SQL> select * from books where contains(info, ‘$manage’) > 0;

SEARCHING FOR FUZZY MATCHES

A fuzzy match expands the specified search term to include words that are spelled similarly but
that do not necessarily have the same word stem. Fuzzy matches are most helpful when the text
contains misspellings. The misspellings can be either in the searched text or in the search string
specified by the user during the query.
The following queries will not return anything because its search does not contain the word
‘hardest’.
SQL> select * from books where contains(info, ‘hardest’) > 0;
It does, however, contains the word ‘harvest’. A fuzzy match will return the books containing the
word ‘harvest’ even though ‘harvest’ has a different word stem thant the word used as the
search term.
To use a fuzzy match, precede the search term with a question mark, with no space between the
question mark and the beginning of the search term.

© Copy rights are reserved.

 88
SQL> select * from books where contains(info, ‘?hardest’) > 0;

SEARCHING FOR WORDS THAT SOUND LIKE OTHER WORDS

SOUNDEX, expands search terms based on how the word sounds. The SOUNDEX expansion
method uses the same text-matching logic available via the SOUNDEX function in SQL.
To use the SOUNDEX option, you must precede the search term with an exclamation mark(!).
SQL> select * from books where contains(info, ‘!grate’) > 0;

INDEX SYNCHRONIZATION

When using CONTEXT indexes, you need to manage the text index contents; the text indexes are
not updated when the base table is updated. When the table was updated, its text index is out of
sync with the base table. To sync of the index, execute the SYNC_INDEX procedure of the CTX_DDL

package.
SQL> exec CTX_DDL.SYNC_INDEX(‘book_index’);

INDEX SETS

Historically, problems with queries of text indexes have occurred when other criteria are used
alongside text searches as part of the where clause. To improve the mixed query capability,
oracle features index sets. The indexes within the index set may be structured relational
columns or on text columns.
To create an index set, use the CTX_DDL package to create the index set and add indexes to it.
When you create a text index, you can then specify the index set it belongs to.
SQL> exec CTX_DDL.CREATE_INDEX_SET(‘books_index_set’);
The add non-text indexes.
SQL> exec CTX_DDL.ADD_INDEX(‘books_index_set’, ‘title_index’);
Now create a CTXCAT text index. Specify ctxsys.ctxcat as the index type, and list the index set in
the parameters clause.
SQL> create index book_index on books(info) indextype is ctxsys.ctxcat
parameters(‘index set books_index_set’);

INDEX-ORGANIZED TABLE
An index-organized table keeps its data sorted according to the primary key column values for
the table. Index-organized tables store their data as if the entire table was stored in an index.
An index-organized table allows you to store the entire table’s data in an index.
Ex:
SQL> create table student (sno number(2),sname varchar(10),smarks number(3)
constraint pk primary key(sno) organization index;

© Copy rights are reserved.

 89

PARTITION INDEX
Similar to partitioning tables, oracle allows you to partition indexes too. Like table partitions,
index partitions could be in different tablespaces.

LOCAL INDEXES

 Local keyword tells oracle to create a separte index for each partition.
 In the local prefixed index the partition key is specified on the left prefix. When the
underlying table is partitioned baes on, say two columns then the index can be prefixed on
the first column specified.
 Local prefixed indexes can be unique or non unique.
 Local indexes may be easier to manage than global indexes.
Ex: SQL> create index stud_index on student(sno) local;

GLOBAL INDEXES

 A global index may contain values from multiple partitions.

 An index is global prefixed if it is partitioned on the left prefix of the index columns.
 The global clause allows you to create a non-partitioned index.
 Global indexes may perform uniqueness checks faster than local (partitioned) indexes.
 You cannot create global indexes for hash partitions or subpartitions.
Ex: SQL> create index stud_index on student(sno) global;
Similar to table partitions, it is possible to move them from one device to another. But unlike
table partitions, movement of index partitions requires individual reconstruction of the index or
each partition (only in the case of global index).
Ex: SQL> alter index stud_ind rebuild partition p2
 Index partitions cannot be dropped manually.
 They are dropped implicitly when the data they refer to is dropped from the partitioned
table.

MONITORING USE OF INDEXES

Once you turned on the monitoring the use of indexes, then we can check whether the table is
hitting the index or not.
To monitor the use of index use the follwing syntax.
Syntax: alter index index_name monitoring usage;
then check for the details in V$OBJECT_USAGE view.
If you want to stop monitoring use the following.
Syntax: alter index index_name nomonitoring usage;
© Copy rights are reserved.
 90

DATA MODEL
 ALL_INDEXES
 DBA_INDEXES
 USER_INDEXES
 ALL_IND-COLUMNS
 DBA-IND_COLUMNS
 USER_IND_COLUMNS
 ALL_PART_INDEXES
 DBA_PART_INDEXES
 USER_PART_INDEXES
 V$OBJECT_USAGE

SQL*PLUS COMMNANDS
These commands does not require statement terminator and applicable to the sessions , those
will be automatically cleared when session was closed.

BREAK
This will be used to breakup the data depending on the grouping.
Syntax: Break or bre [on <column_name> on report]

COMPUTE
This will be used to perform group functions on the data.
Syntax: Compute or comp [group_function of column_name on breaking_column_name or
report]

TTITLE
This will give the top title for your report. You can on or off the ttitle.
Syntax:
Ttitle or ttit [left | center | right] title_name skip n other_characters
Ttitle or ttit [on or off]

BTITLE
This will give the bottom title for your report. You can on or off the btitle.
Syntax:

© Copy rights are reserved.

 91
Btitle or btit [left | center | right] title_name skip n other_characters
Btitle or btit [on or off]
Ex:
SQL> bre on deptno skip 1 on report
SQL> comp sum of sal on deptno
SQL> comp sum of sal on report
SQL> ttitle center 'EMPLOYEE DETAILS' skip1 center '----------------'
SQL> btitle center '** THANKQ **'
SQL> select * from emp order by deptno;

Output:
EMPLOYEE DETAILS
-----------------------
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
---------- ---------- --------- ------- -------------- -------- ---------- ----------
7782 CLARK MANAGER 7839 09-JUN-81 2450 10
7839 KING PRESIDENT 17-NOV-81 5000
7934 MILLER CLERK 7782 23-JAN-82 1300
---------- **********
8750 sum

7369 SMITH CLERK 7902 17-DEC-80 800 20

7876 ADAMS CLERK 7788 23-MAY-87 1100
7902 FORD ANALYST 7566 03-DEC-81 3000
7788 SCOTT ANALYST 7566 19-APR-87 3000
7566 JONES MANAGER 7839 02-APR-81 2975
---------- **********
10875 sum

7499 ALLEN SALESMAN 7698 20-FEB-81 1600 300 30

7698 BLAKE MANAGER 7839 01-MAY-81 2850
7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400
© Copy rights are reserved.
 92
7900 JAMES CLERK 7698 03-DEC-81 950
7844 TURNER SALESMAN 7698 08-SEP-81 1500 0
7521 WARD SALESMAN 7698 22-FEB-81 1250 500
---------- **********
9400 sum
----------
sum 29025

** THANKQ **
CLEAR
This will clear the existing buffers or break or computations or columns formatting.
Syntax: Clear or cle buffer | bre | comp | col;
Ex: SQL> clear buffer
Buffer cleared

SQL> clear bre

Breaks cleared
SQL> clear comp
Computes cleared
SQL> clear col
Columns cleared
CHANGE
This will be used to replace any strings in SQL statements.
Syntax: Change or c/old_string/new_string
If the old_string repeats many times then new_string replaces the first string only.
Ex: SQL> select * from det;
select * from det
*
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> c/det/dept
1* select * from dept
SQL> /
DEPTNO DNAME LOC
---------- ---------------- -----------
10 ACCOUNTING NEW YORK
20 RESEARCH ALLAS
30 SALES CHICAGO
© Copy rights are reserved.
 93
40 OPERATIONS BOSTON
COLUMN
This will be used to increase or decrease the width of the table columns.
Syntax: Column or col <column_name> format <num_format|text_format>
Ex: SQL> col deptno format 999
SQL> col dname format a10
SAVE
This will be used to save your current SQL statement as SQL Script file.
Syntax: Save or sav <file_name>.[extension] replace or rep
If you want to save the filename with existing filename the you have to use replace option.
By default it will take sql as the extension.
Ex: SQL> save ss
Created file ss.sql
SQL> save ss replace
Wrote file ss.sql
EXECUTE
This will be used to execute stored subprograms or packaged subprograms.
Syntax:
Execute or exec <subprogram_name>
Ex: SQL> exec sample_proc

SPOOL
This will record the data when you spool on, upto when you say spool off. By default it will give
lst as extension.
Syntax: Spool on | off | out | <file_name>.[Extension]
Ex: SQL> spool on
SQL> select * from dept;
DEPTNO DNAME LOC
--------- -------------- ----------
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
SQL> spool off
SQL> ed on.lst
SQL> select * from dept;
DEPTNO DNAME LOC
--------- -------------- ----------
© Copy rights are reserved.
 94
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
SQL> spool off
LIST
This will give the current SQL statement.
Syntax: List or li [start_line_number] [end_line_number]
Ex: SQL> select
2 *
3 from
4 dept;

SQL> list
1 select
2 *
3 from
4* dept
SQL> list 1
1* select
SQL> list 3
3* from

SQL> list 1 3
1 select
2 *
3* from

INPUT
This will insert the new line to the current SQL statement.
Syntax: Input or in <string>
Ex:
SQL> select *
SQL> list
1* select *
SQL> input from dept

© Copy rights are reserved.

 95
SQL> list
1 select *
2* from dept
APPEND
This will adds a new string to the existing string in the SQL statement without any space.
Syntax: Append or app <string>
Ex: SQL> select *
SQL> list
1* select *
SQL> append from dept
1* select * from dept
SQL> list
1* select * from dept

DELETE
This will delete the current SQL statement lines.
Syntax: Delete or del <start_line_number> [<end_line_number>]
Ex: SQL> select
2 *
3 from
4 dept
5 where
6 deptno
7 >10;
SQL> list
1 select
2 *
3 from
4 dept
5 where
6 deptno
7* >10
SQL> del 1
SQL> list
1 *
2 from
3 dept
© Copy rights are reserved.
 96
4 where
5 deptno
6* >10
SQL> del 2
SQL> list
1 *
2 dept
3 where
4 deptno
5* >10
SQL> del 2 4
SQL> list
1 *
2* >10
SQL> del
VARIABLE
This will be used to declare a variable.
Syntax: Variable or var <variable_name> <variable_type>
Ex: SQL> var dept_name varchar(15)
SQL> select dname into dept_name from dept where deptno = 10;
PRINT
This will be used to print the output of the variables that will be declared at SQL level.
Syntax: Print <variable_name>
Ex: SQL> print dept_name
DEPT_NAME
--------------
ACCOUNTING
START
This will be used to execute SQL scripts.
Syntax: start <filename_name>.sql
Ex: SQL> start ss.sql
SQL> @ss.sql -- this will execute sql script files only.
HOST
This will be used to interact with the OS level from SQL.

Syntax: Host [operation]

Ex: SQL> host
SQL> host dir
SHOW
© Copy rights are reserved.
 97
Using this, you can see several commands that use the set command and status.
Syntax: Show all | <set_command>
Ex: SQL> show all
appinfo is OFF and set to "SQL*Plus"
arraysize 15
autocommit OFF
autoprint OFF
autorecovery OFF
autotrace OFF
blockterminator "." (hex 2e)
btitle OFF and is the first few characters of the next SELECT statement
cmdsep OFF
colsep " "
SQL> sho verify
verify OFF
RUN
This will runs the command in the buffer.
Syntax: Run | /
Ex: SQL> run
SQL> /
STORE
This will save all the set command statuses in a file.
Syntax: Store set <filename>.[extension] [create] | [replace] | [append]
Ex: SQL> store set my_settings.scmd
Created file my_settings.scmd
SQL> store set my_settings.cmd replace
Wrote file my_settings.cmd
SQL> store set my_settings.cmd append
Appended file to my_settings.cmd
FOLD_AFTER
This will fold the columns one after the other.
Syntax: Column <column_name> fold_after [no_of_lines]
Ex: SQL> col deptno fold_after 1
SQL> col dname fold_after 1
SQL> col loc fold_after 1
SQL> set heading off
SQL> select * from dept;
10
© Copy rights are reserved.
 98
ACCOUNTING
NEW YORK
20
RESEARCH
DALLAS
30
SALES
CHICAGO
FOLD_BEFORE
This will fold the columns one before the other.
Syntax: Column <column_name> fold_before [no_of_lines]

DEFINE
This will give the list of all the variables currently defined.
Syntax: Define [variable_name]
Ex: SQL> define
DEFINE _DATE = "16-MAY-07" (CHAR)
DEFINE _CONNECT_IDENTIFIER = "oracle" (CHAR)
DEFINE _USER = "SCOTT" (CHAR)
DEFINE _PRIVILEGE = "" (CHAR)
DEFINE _SQLPLUS_RELEASE = "1001000200" (CHAR)
DEFINE _EDITOR = "Notepad" (CHAR)
DEFINE _O_VERSION = "Oracle Database 10g Enterprise Edition Release
10.1.0.2.0 – Production With the Partitioning, OLAP and
Data Mining options" (CHAR)
DEFINE _O_RELEASE = "1001000200" (CHAR)

SET COMMANDS

These commands does not require statement terminator and applicable to the sessions , those
will be automatically cleared when session was closed.
LINESIZE
This will be used to set the linesize. Default linesize is 80.
Syntax: Set linesize <value>
© Copy rights are reserved.
 99
Ex: SQL> set linesize 100
PAGESIZE
This will be used to set the pagesize. Default pagesize is 14.
Syntax: Set pagesize <value>
Ex: SQL> set pagesize 30
DESCRIBE
This will be used to see the object’s structure.
Syntax: Describe or desc <object_name>
Ex: SQL> desc dept

Name Null? Type

----------------------------------------------------------------- ---------------------
DEPTNO NOT NULL NUMBER(2)
DNAME VARCHAR2(14)
LOC VARCHAR2(13)
PAUSE
When the displayed data contains hundreds or thousands of lines, when you select it then it will
automatically scrolls and displays the last page data. To prevent this you can use this pause
option. By using this it will display the data correspoinding to the pagesize with a break which
will continue by hitting the return key. By default this will be off.
Syntax: Set pause on | off
Ex: SQL> set pause on
FEEDBACK
This will give the information regarding howmany rows you selected the object. By default the
feedback message will be displayed, only when the object contains more than 5 rows.
Syntax: Set feedback <value>
Ex: SQL> set feedback 4
SQL> select * from dept;
DEPTNO DNAME LOC
---------- -------------- -------------
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
4 rows selected.
HEADING
If you want to display data without headings, then you can achieve with this. By default heading
is on.
© Copy rights are reserved.
 100
Syntax: Set heading on | off
Ex: SQL> set heading off
SQL> select * from dept;
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
SERVEROUTPUT
This will be used to display the output of the PL/SQL programs. By default this will be off.
Syntax: Set serveroutput on | off

Ex: SQL> set serveroutput on

TIME
This will be used to display the time. By default this will be off.
Syntax: Set time on | off
Ex: SQL> set time on
19:56:33 SQL>

TIMING
This will give the time taken to execute the current SQL statement. By default this will be off.
Syntax: Set timing on | off
Ex: SQL> set timing on
SQL> select * from dept;
DEPTNO DNAME LOC
---------- -------------- -------------
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
Elapsed: 00:00:00.06

SQLPROMPT
This will be used to change the SQL prompt.
Syntax: Set sqlprompt <prompt>
Ex: SQL> set sqlprompt 'ORACLE>'
© Copy rights are reserved.
 101
ORACLE>

SQLCASE
This will be used to change the case of the SQL statements. By default the case is mixed.
Syntax: Set sqlcase upper | mixed | lower
Ex: SQL> set sqlcase upper

SQLTERMINATOR
This will be used to change the terminator of the SQL statements. By default the terminator is ;.
Syntax: Set sqlterminator <termination_character>
Ex: SQL> set sqlterminator :
SQL> select * from dept:

DEFINE
By default if the & character finds then it will treat as bind variable and ask for the input.
Suppose your want to treat it as a normal character while inserting data, then you can prevent
this by using the define option. By default this will be on
Syntax: Set define on | off
Ex: SQL>insert into dept values(50,'R&D','HYD');
Enter value for d:
old 1: insert into dept values(50,'R&D','HYD')
new 1: INSERT INTO DEPT VALUES(50,'R','HYD')
SQL> set define off
SQL>insert into dept values(50,'R&D','HYD'); -- here it won’t ask for value
NEWPAGE
This will shows how many blank lines will be left before the report. By default it will leave one
blank line.
Syntax: Set newpage <value>
Ex: SQL> set newpage 10
The zero value for newpage does not produce zero blank lines instead it switches to a special
property which produces a top-of-form character (hex 13) just before the date on each page.
Most modern printers respond to this by moving immediately to the top of the next page, where
the priting of the report will begin.
HEADSEP
This allow you to indicate where you want to break a page title or a column heading that runs
longer than one line. The default heading separator is vertical bar (|).

© Copy rights are reserved.

 102
Syntax: Set headsep <separation_char>
Ex: SQL> select * from dept;
DEPTNO DNAME LOC
---------- -------------- -------------
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
SQL> set headsetp !
SQL> col dname heading 'DEPARTMENT ! NAME'
SQL> /
DEPARTMENT
DEPTNO NAME LOC
---------- ----------------- ----------
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS

ECHO
When using a bind variable, the SQL statement is maintained by echo. By default this is off.
Syntax: Set echo on | off
VERIFY
When using a bind variable, the old and new statements will be maintained by verify. By default
this is on.
Syntax: Set verify on | off
Ex: SQL> select * from dept where deptno = &dno;
Enter value for dno: 10
old 1: select * from dept where deptno = &dno
new 1: select * from dept where deptno = 10
DEPTNO DNAME LOC
---------- ---------------- -----------
10 ACCOUNTING NEW YORK
SQL> set verify off
SQL> select * from dept where deptno = &dno;
Enter value for dno: 20
DEPTNO DNAME LOC
---------- ------------- -----------
20 RESEARCH DALLAS
PNO
This will give displays the page numbers. By default the value would be zero.
Ex: SQL> col hiredate new_value xtoday noprint format a1 trunc
© Copy rights are reserved.
 103
SQL> ttitle left xtoday right 'page' sql.pno
SQL> select * from emp where deptno = 10;
09-JUN-81 page 1
EMPNO ENAME JOB MGR SAL COMM DEPTNO
---------- ---------- --------------- --------- ----- ---------- ----------
7782 CLARK MANAGER 7839 2450 10
7839 KING PRESIDENT 5000 10
7934 MILLER CLERK 7782 1300 10

In the above noprint tells SQLPLUS not to display this column when it prints the results of the SQL

statement. Dates that have been reformatted by TO_CHAR get a default width of about 100
characters. By changing the format to a1 trunc, you minimize this effect. NEW_VALUE inserts
contents of the column retrieved by the SQL statement into a variable called xtoday.

SPECIAL FILES
LOGIN.sql
If you would like SQLPLUS to define your own environmental settings, put all the required
commands in a file named login.sql. This is a special filename that SQLPLUS always looks for
whenever it starts up. If it finds login.sql, it executes any commands in it as if you had entered
then by hand. You can put any command in login.sql that you can use in SQLPLUS, including
SQLPLUS commands and SQL statements. All ot them executed before SQLPLUS gives you the SQL>

prompt.
GLOGIN.sql
This is used in the same ways as LOGIN.sql but to establish default SQLPLUS settings for all users of
a database.

IMPORTANT QUERIES

1) To find the nth row of a table

SQL> Select *from emp where rowid = (select max(rowid) from emp where rownum
<= 4);
Or
SQL> Select *from emp where rownum <= 4 minus select *from emp where rownum
<= 3;
2) To find duplicate rows

© Copy rights are reserved.

 104
SQL> Select *from emp where rowid in (select max(rowid) from emp group by
empno, ename, mgr, job, hiredate, comm, deptno, sal);
Or
SQL> Select empno,ename,sal,job,hiredate,comm , count(*) from emp group by
empno,ename,sal,job,hiredate,comm having count(*) >=1;
3) To delete duplicate rows
SQL> Delete emp where rowid in (select max(rowid) from emp group by
empno,ename,mgr,job,hiredate,sal,comm,deptno);
4) To find the count of duplicate rows
SQL> Select ename, count(*) from emp group by ename having count(*) >= 1;
5) How to display alternative rows in a table?
SQL> select *from emp where (rowid,0) in (select rowid,mod(rownum,2) from emp);
6) Getting employee details of each department who is drawing maximum sal?
SQL> select *from emp where (deptno,sal) in ( select deptno,max(sal) from emp group by
Deptno);

7) How to get number of employees in each department , in which department is having more
than 2500 employees?
SQL> Select deptno,count(*) from emp group by deptno having count(*) >2500;
8) To reset the time to the beginning of the day

SQL> Select to_char(trunc(sysdate),’dd-mon-yyyy hh:mi:ss am’) from dual;

9) To find nth maximum sal

SQL> Select *from emp where sal in (select max(sal) from (select *from emp order
by sal) where rownum <= 5);

Queries To find the 2nd highest salary and Nth highest salary from employee table

1)select b.sal
from (select distinct sal from emp) a,
(select distinct sal from emp) b
where a.sal>=b.sal
group by b.sal
having count(b.sal)=2

2)SELECT MAX(SAL) FROM EMPA WHERE SAL<(SELECT MAX(SAL) FROM EMPA WHERE
SAL<(SELECT MAX(SAL) FROM EMPA))

3)SELECT SALARY FROM EMPLOYEE

  WHERE SALARY=(SELECT MAX(SALARY) FROM EMPLOYEE
  WHERE SALARY <> (SELECT MAX(SALARY) FROM EMPLOYEE))

© Copy rights are reserved.

 105
4)To find the Select the Nth Highest Salary from a table
 
 SELECT * FROM TableName E1
  WHERE (N=(SELECT COUNT(DISTINCT (E2.sal))
  FROM TableName E2 WHERE E2.sal >= E1.sal))

INTRODUCTION

CHARACTERSTICS
 Highly structured, readable and accessible language.
 Standard and Protable language.
 Embedded language.
 Improved execution authority.
10g FEATURES
 Optimized compiler
.To change the optimizer settings for the entire database, set the database parameter
PLSQL_OPTIMIZE_LEVEL. Valid settings are as follows
0 - No optimization
1 - Moderate optimization
2 - Aggressive optimization
These settings are also modifiable for the current session.
SQL> alter session set plsql_optimze_level=2;
Oracle retains optimizer settings on a module-by-module basis. When you recompile a
particular module with nondefault settings, the settings will stick allowing you to
recompile later on using REUSE SETTINGS.

SQL> Alter procedure proc compile plsql_optimize_level=1;

SQL> Alter procedure proc compile reuse settings;
 Compile-time warnings.
© Copy rights are reserved.
 106
Starting with oracle database 10g release 1 you can enable additional compile-time
warnings to help make your programs more robust. The compiler can detect potential
runtime problems with your code, such as identifying lines of code that will never be run.
This process, also known as lint checking.
To enable these warnings fo the entire database, set the database parameter
PLSQL_WARNINGS. These settings are also modifiable for the current session.
SQL> alter session set plsql_warnings = ‘enable:all’;
The above can be achieved using the built-in package DBMS_WARNING.

 Conditional compilation.
Conditional compilation allows the compiler to allow to compile selected parts of a
program based on conditions you provide with the $IF directive.
 Support for non-sequential collections in FORALL.

 Improved datatype support.

 Backtrace an exception to its line number.
When handling an error, how can you find the line number on which the error was
originally raised?
In earlier release, the only way to do this was allow you exception to go unhandled and
then view the full error trace stack.
Now you can call DBMS_UTILITY.FORMAT_ERROR_BACKTRACE function to obtain that stack and
manipulate it programmatically within your program.
 Set operators for nested tables.
 Support for regular expressions.
Oracle database 10g supports the use of regular expressions inside PL/SQL code via four
new built-in functions.
 REGEXP_LIKE

 REGEXP_INSTR

 REGEXP_SUBSTR

 REGEXP_REPLACE

 Programmer-defined quoting mechanism.

Starting with oracle database 10g release 1, you can define your own quoting mechanism
for string literals in both SQL and PL/SQL.

Use the characters q’(q followed by a single quote) to note the programmer-defined
deliemeter for you string literal.
Ex: DECLARE

v varchar(10) := 'computer';
BEGIN

dbms_output.put_line(q'*v = *' || v);

dbms_output.put_line(q'$v = $' || v);

© Copy rights are reserved.

 107
END;

Output:
v = computer
v = computer
 Many new built-in packages.
DBMS_SCHEDULER
Represents a major update to DBMS_JOB. DBMS_SCHEDULER provides much improved
functionality for scheduling and executing jobs defined via stored procedures.
DBMS_CRYPTO
Offers the ability to encrypt and decrypt common oracle datatype, including RAWs, BLOBs,

and CLOBs. It also provides globalization support for encrypting data across different
charactersets.
DBMS_MONITOR
Provides an API to control additional tracing and statistics gathering of sessions.
DBMS_WARNING
Provides an API into the PL/SQL compiler warnings module, allowing you to read and
change settings that control which warnings are suppressed, displayed, or treated as
errors.
STANDARD PACKAGE
Oracle has defined in this special package. Oracle defines quite a few identifiers in this package,
including built-in exceptions, functions and subtypes.
You can reference the built-in form by prefixing it with STANDARD.

The basic unit in any PL/SQL program is block. All PL/SQL programs are composed of blocks which
can occur sequentially or nested.

BLOCK STRUCTURE
Declare
-- declarative section
Begin
-- executable section
Exception
-- exception section
End;
In the above declarative and exceptiona sections are optional.
BLOCK TYPES
 Anonymous blocks
 Named blocks
 Labeled blocks
© Copy rights are reserved.
 108
 Subprograms
 Triggers
ANONYMOUS BLOCKS

Anonymous blocks implies basic block structure.

Ex: BEGIN

Dbms_output.put_line(‘My first program’):

END;

LABELED BLOCKS

Labeled blocks are anonymous blocks with a label which gives a name to the block.
Ex: <<my_bloock>>
BEGIN

Dbms_output.put_line(‘My first program’):

END;

SUBPROGRAMS

Subprograms are procedures and functions. They can be stored in the database as stand-alone
objects, as part of package or as methods of an object type.
TRIGGERS

Triggers consists of a PL/SQL block that is associated with an event that occur in the database.
NESTED BLOCKS
A block can be nested within the executable or exception section of an outer block.
IDENTIFIERS
Identifiers are used to name PL/SQL objects, such as variables, cursors, types and subprograms.
Identifiers consists of a letter, optionally followed by any sequence of characters, including
letters, numbers, dollar signs, underscores, and pound signs only. The maximum length for an
identifier is 30 characters.
QUOTED IDENTIFIERS
If you want to make an identifier case sensitive, include characters such as spaces or use a
reserved word, you can enclose the identifier in double quotation marks.
Ex: DECLARE

"a" number := 5;
"A" number := 6;
BEGIN

dbms_output.put_line('a = ' || a);

dbms_output.put_line('A = ' || A);
END;

Output:
a=6

© Copy rights are reserved.

 109
A=6
COMMENTS
Comments improve readability and make your program more understandable. They are ignored
by the PL/SQL compiler. There are two types of comments available.
 Single line comments
 Multiline comments
SINGLE LINE COMMENTS

A single-line comment can start any point on a line with two dashes and continues until the end
of the line.
Ex:
BEGIN

Dbms_output.put_line(‘hello’); -- sample program

END;

MULTILINE COMMENTS

Multiline comments start with the /* delimiter and ends with */ delimiter.
Ex: BEGIN

Dbms_output.put_line(‘hello’); /* sample program */

END;

VARIABLE DECLERATIONS
Variables can be declared in declarative section of the block;
Ex: DECLARE

a number;
b number := 5;
c number default 6;
CONSTANT DECLERATIONS
To declare a constant, you include the CONSTANT keyword, and you must supply a default value.
Ex: DECLARE

b constant number := 5;
c constant number default 6;
NOT NULL CLAUSE
You can also specify that the variable must be not null.
Ex: DECLARE

b constant number not null:= 5;

c number not null default 6;
ANCHORED DECLERATIONS
PL/SQL offers two kinds of achoring.

© Copy rights are reserved.

 110
 Scalar anchoring
 Record anchoring
SCALAR ANCHORING

Use the %TYPE attribute to define your variable based on table’s column of some other PL/SQL

scalar variable.
Ex: DECLARE

dno dept.deptno%type;
Subtype t_number is number;
a t_number;
Subtype t_sno is student.sno%type;
V_sno t_sno;
RECORD ANCHORING

Use the %ROWTYPE attribute to define your record structure based on a table.
Ex: `DECLARE
V_dept dept%rowtype;

BENEFITS OF ANCHORED DECLARATIONS

 Synchronization with database columns.

 Normalization of local variables.
PROGRAMMER-DEFINED TYPES
With the SUBTYPE statement, PL/SQL allows you to define your own subtypes or aliases of
predefined datatypes, sometimes referred to as abstract datatypes.
There are two kinds of subtypes.
 Constrained
 Unconstrained
CONSTRAINED SUBTYPE

A subtype that restricts or constrains the values normally allowed by the datatype itself.
Ex: Subtype positive is binary_integer range 1..2147483647;

In the above declaration a variable that is declared as positive can store only ingeger greater
than zero even though binary_integer ranges from -2147483647..+2147483647.
UNCONSTRAINED SUBTYPE
A subtype that does not restrict the values of the original datatype in variables declared with the
subtype.
Ex: Subtype float is number;
DATATYPE CONVERSIONS
PL/SQL can handle conversions between different families among the datatypes.
Conversion can be done in two ways.

© Copy rights are reserved.

 111
 Explicit conversion
 Implicit conversion
EXPLICIT CONVERSION

This can be done using the built-in functions available.

IMPLICIT CONVERSION

PL/SQL will automatically convert between datatype families when possible.

Ex: DECLARE

a varchar(10);
BEGIN

select deptno into a from dept where dname='ACCOUNTING';

END;

In the above variable a is char type and deptno is number type even though, oracle will
automatically converts the numeric data into char type assigns to the variable.
PL/SQL can automatically convert between

 Characters and numbers

 Characters and dates
VARIABLE SCOPE AND VISIBILITY
The scope of a variable is the portion of the program in which the variable can be accessed. For
PL/SQL variables, this is from the variable declaration until the end of the block. When a variable
goes out of scope, the PL/SQL engine will free the memory used to store the variable.
The visibility of a variable is the portion of the program where the variable can be accessed
without having to qualify the reference. The visibility is always within the scope. If it is out of
scope, it is not visible.
Ex1: DECLARE

a number; -- scope of a
BEGIN
--------
DECLARE

b number; -- scope of b
BEGIN

-----
END;

------
END;

Ex2: DECLARE

a number;
b number;
BEGIN

-- a , b available here
© Copy rights are reserved.
 112
DECLARE

b char(10);
BEGIN

-- a and char type b is available here

END;

-----
END;

Ex3: <<my_block>>
DECLARE

a number;
b number;
BEGIN

-- a , b available here
DECLARE

b char(10);
BEGIN

-- a and char type b is available here

-- number type b is available using <<my_block>>.b END; ------END;
PL/SQL CONTROL STRUCTURES
PL/SQL has a variety of control structures that allow you to control the behaviour of the block as it
runs. These structures include conditional statements and loops.
 If-then-else
 Case
 Case with no else
 Labeled case
 Searched case
 Simple loop
 While loop
 For loop
 Goto and Labels
IF-THEN-ELSE
Syntax:
If <condition1> then
Sequence of statements;
Elsif <condition1> then
Sequence of statements;
……
Else
Sequence of statements;

© Copy rights are reserved.

 113
End if;
Ex:
DECLARE

dno number(2);
BEGIN

select deptno into dno from dept where dname = 'ACCOUNTING';

if dno = 10 then
dbms_output.put_line('Location is NEW YORK');

elsif dno = 20 then

dbms_output.put_line('Location is DALLAS');

elsif dno = 30 then

dbms_output.put_line('Location is CHICAGO');

else
dbms_output.put_line('Location is BOSTON');

end if;
END;

Output:
Location is NEW YORK

CASE
Syntax:
Case test-variable
When value1 then sequence of statements;
When value2 then sequence of statements;
……
When valuen then sequence of statements;
Else sequence of statements;
End case;
Ex:
DECLARE

dno number(2);
BEGIN

select deptno into dno from dept where dname = 'ACCOUNTING';

case dno
when 10 then
dbms_output.put_line('Location is NEW YORK');

when 20 then
dbms_output.put_line('Location is DALLAS');

when 30 then
© Copy rights are reserved.
 114
dbms_output.put_line('Location is CHICAGO');

else
dbms_output.put_line('Location is BOSTON');

end case;
END;

Output:
Location is NEW YORK

CASE WITHOUT ELSE

Syntax:
Case test-variable
When value1 then sequence of statements;
When value2 then sequence of statements;
……
When valuen then sequence of statements;
End case;
Ex:
DECLARE

dno number(2);
BEGIN

select deptno into dno from dept where dname = 'ACCOUNTING';

case dno
when 10 then
dbms_output.put_line('Location is NEW YORK');

when 20 then
dbms_output.put_line('Location is DALLAS');

when 30 then
dbms_output.put_line('Location is CHICAGO');

when 40 then
dbms_output.put_line('Location is BOSTON');

© Copy rights are reserved.

 115
end case;
END;

Output:
Location is NEW YORK

LABELED CASE
Syntax:
<<label>>
Case test-variable
When value1 then sequence of statements;
When value2 then sequence of statements;
……
When valuen then sequence of statements;
End case;

Ex:
DECLARE

dno number(2);
BEGIN

select deptno into dno from dept where dname = 'ACCOUNTING';

<<my_case>>
case dno
when 10 then
dbms_output.put_line('Location is NEW YORK');

when 20 then
dbms_output.put_line('Location is DALLAS');

when 30 then
dbms_output.put_line('Location is CHICAGO');

when 40 then
dbms_output.put_line('Location is BOSTON');

end case my_case;

END;

Output:
Location is NEW YORK

SEARCHED CASE
Syntax:

© Copy rights are reserved.

 116
Case
When <condition1> then sequence of statements;
When <condition2> then sequence of statements;
……
When <conditionn> then sequence of statements;
End case;

Ex:
DECLARE

dno number(2);
BEGIN

select deptno into dno from dept where dname = 'ACCOUNTING';

case dno
when dno = 10 then
dbms_output.put_line('Location is NEW YORK');

when dno = 20 then

dbms_output.put_line('Location is DALLAS');

when dno = 30 then

dbms_output.put_line('Location is CHICAGO');

when dno = 40 then

dbms_output.put_line('Location is BOSTON');

end case;
END;

Output:
Location is NEW YORK

SIMPLE LOOP
Syntax:
Loop
Sequence of statements;
Exit when <condition>;
End loop;

In the syntax exit when <condition> is equivalent to

If <condition> then
Exit;
End if;

© Copy rights are reserved.

 117

Ex:
DECLARE

i number := 1;
BEGIN

loop
dbms_output.put_line('i = ' || i);
i := i + 1;
exit when i > 5;
end loop;
END;

Output:
i=1
i=2
i=3
i=4
i=5

WHILE LOOP
Syntax:
While <condition> loop
Sequence of statements;
End loop;
Ex:
DECLARE

i number := 1;
BEGIN

While i <= 5 loop

dbms_output.put_line('i = ' || i);
i := i + 1;
end loop;
END;

Output:
i=1
i=2
i=3
i=4
© Copy rights are reserved.
 118
i=5
FOR LOOP
Syntax:
For <loop_counter_variable> in low_bound..high_bound loop
Sequence of statements;
End loop;
Ex1:
BEGIN

For i in 1..5 loop

dbms_output.put_line('i = ' || i);
end loop;
END;

Output:
i=1
i=2
i=3
i=4
i=5
Ex2:
BEGIN

For i in reverse 1..5 loop

dbms_output.put_line('i = ' || i);
end loop;
END;

Output:
i=5
i=4
i=3
i=2
i=1

NULL STATEMENT
Usually when you write a statement in a program, you want it to do something. There are cases,
however, when you want to tell PL/SQL to do absolutely nothing, and that is where the NULL

comes.
The NULL statement deos nothing except pass control to the next executable statement.
You can use NULL statement in the following situations.

© Copy rights are reserved.

 119
 Improving program readability.
Sometimes, it is helpful to avoid any ambiguity inherent in an IF statement that doesn’t cover
all possible cases. For example, when you write an IF statement, you do not have to include
an ELSE clause.

 Nullifying a raised exception.

When you don’t want to write any special code to handle an exception, you can use the NULL
statement to make sure that a raised exception halts execution of the current PL/SQL block but
does not propagate any exceptions to enclosing blocks.

 Using null after a label.

In some cases, you can pair NULL with GOTO to avoid having to execute additional statements.
For example, I use a GOTO statement to quickly move to the end of my program if the state of
my data indicates that no further processing is required. Because I do not have to do
anything at the termination of the program, I place a NULL statement after the label because
at least one executable statement is required there. Even though NULL deos nothing, it is still
an executable statement.

GOTO AND LABELS

Syntax:
Goto label;
Where label is a label defined in the PL/SQL block. Labels are enclosed in double angle brackets.
When a goto statement is evaluated, control immediately passes to the statement identified by
the label.
Ex:
BEGIN

For i in 1..5 loop

dbms_output.put_line('i = ' || i);
if i = 4 then
goto exit_loop;
end if;
end loop;
<<exit_loop>>
Null;
END;

Output:
i=1
i=2

© Copy rights are reserved.

 120
i=3
i=4
RESTRICTIONS ON GOTO

 It is illegal to branch into an inner block, loop.

 At least one executable statement must follow.
 It is illegal to branch into an if statement.
 It is illegal to branch from one if statement to another if statement.
 It is illegal to branch from exception block to the current block.
PRAGMAS
Pragmas are compiler directives. They serve as instructions to the PL/SQL compiler. The compiler
will act on the pragma during the compilation of the block.
Syntax: PRGAMA instruction_to_compiler.

PL/SQL offers several pragmas:

 AUTONOMOUS_TRANSACTION
 EXCEPTION_INIT
 RESTRICT_REFERENCES

 SERIALLY_REUSABLE

SUBPROGRAMS
PROCEDURES
A procedure is a module that performs one or more actions.
Syntax:
Procedure [schema.]name [(parameter1 [,parameter2 …])]
[authid definer | current_user] is
-- [declarations]
Begin
-- executable statements
[Exception
-- exception handlers]
End [name];

In the above authid clause defines whether the procedure will execute under the authority of the
definer of the procedure or under the authority of the current user.

FUNCTIONS
A function is a module that returns a value.

© Copy rights are reserved.

 121
Syntax:
Function [schema.]name [(parameter1 [,parameter2 …])]
Return return_datatype
[authid definer | current_user]
[deterministic]
[parallel_enable] is
-- [declarations]
Begin
-- executable statements
[Exception
-- exception handlers]
End [name];
In the above authid clause defines whether the Function will execute under the authority of the
definer of the Function or under the authority of the current user.
Deterministic clause defines, an optimization hint that lets the system use a saved copy of the
function’s return result, if available. The quety optimizer can choose whether to use the saved
copy or re-call the function.
Parallel_enable clause defines, an optimization hint that enables the function to be executed in
parallel when called from within SELECT statement.
PARAMETER MODES
 In (Default)
 Out
 In out

IN

In parameter will act as pl/sql constant.

OUT

 Out parameter will act as unintialized variable.

 You cannot provide a default value to an out parameter.
 Any assignments made to out parameter are rolled back when an exception is raised in the
program.
 An actual parameter corresponding to an out formal parameter must be a variable.
IN OUT

 In out parameter will act as initialized variable.

 An actual parameter corresponding to an in out formal parameter must be a variable.

DEFAULT PARAMETERS
Default Parameters will not allow in the beginning and middle.

© Copy rights are reserved.

 122
Out and In Out parameters can not have default values.
Ex:
procedure p(a in number default 5, b in number default 6, c in number default 7) – valid
procedure p(a in number, b in number default 6, c in number default 7) – valild
procedure p(a in number, b in number, c in number default 7) – valild
procedure p(a in number, b in number default 6, c in number) – invalild
procedure p(a in number default 5, b in number default 6, c in number) – invalild
procedure p(a in number default 5, b in number, c in number) – invalild

NOTATIONS
Notations are of two types.
 Positional notation
 Name notation
We can combine positional and name notation but positional notation can not be followed by the
name notation.
Ex: Suppose we have a procedure proc(a number,b number,c number) and we have one
anonymous block which contains v1,v2, and v3;
SQL> exec proc (v1,v2,v3) -- Positional notation
SQL> exec proc (a=>v1,b=>v2,c=>v3) -- Named notation
FORMAL AND ACTUAL PARAMETERS
 Parametes which are in calling subprogram are actual parameters.
 Parametes which are in called subprogram are formal parameters.
 If any subprogram was called, once the call was completed then the values of formal
parameters are copied to the actual parameters.
Ex1:
CREATE OR REPLACE PROCEDURE SAMPLE(a in number,b out number,c in out
number) is
BEGIN

dbms_output.put_line('After call');
dbms_output.put_line('a = ' || a ||' b = ' || b || ' c = ' || c);
b := 10;
c := 20;
dbms_output.put_line('After assignment');
dbms_output.put_line('a = ' || a ||' b = ' || b || ' c = ' || c);
END SAMPLE;

DECLARE

v1 number := 4;

© Copy rights are reserved.

 123
v2 number := 5;
v3 number := 6;
BEGIN

dbms_output.put_line('Before call');
dbms_output.put_line('v1 = ' || v1 || ' v2 = ' || v2 || ' v3 = ' || v3);
sample(v1,v2,v3);
dbms_output.put_line('After completion of call');
dbms_output.put_line('v1 = ' || v1 || ' v2 = ' || v2 || ' v3 = ' || v3);
END;

Output:
Before call
v1 = 4 v2 = 5 v3 = 6
After call
a=4b= c=6
After assignment
a = 4 b = 10 c = 20
After completion of call
v1 = 4 v2 = 10 v3 = 20

Ex2:
CREATE OR REPLACE FUN(a in number,b out number,c in out number) return
number IS

BEGIN

dbms_output.put_line('After call');
dbms_output.put_line('a = ' || a || ' b = ' || b || ' c = ' || c);
dbms_output.put_line('Before assignement Result = ' || (a*nvl(b,1)*c));
b := 5;
c := 7;
dbms_output.put_line('After assignment');
dbms_output.put_line('a = ' || a || ' b = ' || b || ' c = ' || c);
return (a*b*c);
END FUN;

DECLARE

v1 number := 1;
v2 number := 2;
v3 number := 3;
v number;
© Copy rights are reserved.
 124
BEGIN

dbms_output.put_line('Before call');
dbms_output.put_line('v1 = ' || v1 || ' v2 = ' || v2 || ' v3 = ' || v3);
v := fun(v1,v2,v3);
dbms_output.put_line('After call completed');
dbms_output.put_line('v1 = ' || v1 || ' v2 = ' || v2 || ' v3 = ' || v3);
dbms_output.put_line('Result = ' || v);
END;

Output:
Before call
v1 = 1 v2 = 2 v3 = 3
After call
a=1b= c=3
Before assignement Result = 3
After assignment
a=1b=5c=7
After call completed
v1 = 1 v2 = 5 v3 = 7
Result = 35
RESTRICTIONS ON FORMAL PARAMETERS

 By declaring with specified size in actual parameters.

 By declaring formal parameters with %type specifier.
USING NOCOPY
 Nocopy is a hint, not a command. This means that the compiler might silently decide that
it can’t fulfill your request for a nocopy parameter.
 The copying from formal to actual can be restricted by issuing nocopy qualifier.
 To pass the out and in out parameters by reference use nocopy qualifier.
Ex:
CREATE OR REPLACE PROCEDURE PROC(a in out nocopy number) IS
BEGIN
----
END PROC;

CALL AND EXEC

Call is a SQL statement, which can be used to execute subprograms like exec.

Syntax:
© Copy rights are reserved.
 125
Call subprogram_name([argument_list]) [into host_variable];

 The parantheses are always required, even if the subprogram takes no arguments.
 We can not use call with out and in out parameters.
 Call is a SQL statement, it is not valid inside a PL/SQL block;
 The INTO clause is used for the output variables of functions only.
 We can not use ‘exec’ with out or in out parameters.
 Exec is not valid inside a PL/SQL block;

Ex1:
CREATE OR REPLACE PROC IS
BEGIN

dbms_output.put_line('hello world');
END PROC;

Output:
SQL> call proc();
hello world

Ex2:
CREATE OR REPLACE PROC(a in number,b in number) IS

BEGIN

dbms_output.put_line('a = ' || a || ' b = ' || b);

END PROC;

Output:
SQL> call proc(5,6);
a=5b=6
Ex3:
CREATE OR REPLACE FUNCTION FUN RETURN VARCHAR IS
BEGIN

return 'hello world';

END FUN;

Output:
SQL> variable v varchar(20)
SQL> call fun() into :v;
SQL> print v
hello world

© Copy rights are reserved.

 126
CALL BY REFERENCE AND CALL BY VALUE

 In parameters by default call by reference where as out and in out call by value.
 When parameter passed by reference, a pointer to the actual parameter is passed to the
corresponding formal parameter.
 When parameter passed by value it copies the value of the actual parameter to the formal
parameter.
 Call by reference is faster than the call by value because it avoids the copying.

SUBPROGRAMS OVERLOADING

 Possible with different number of parameters.

 Possible with different types of data.
 Possible with same type of objects.
 Can not be possible with different types of modes.
 We can overload local subprograms also.

Ex:
SQL> create or replace type t1 as object(a number);/
SQL> create or replace type t2 as object(a number);/

DECLARE

i t1 := t1(5);
j t2 := t2(5);
PROCEDURE P(m t1) IS
BEGIN

dbms_output.put_line('a = ' || m.a);

END P;
PROCEDURE P(n t2) IS
BEGIN

dbms_output.put_line('b = ' || n.b);

END P;
PROCEDURE PRODUCT(a number,b number) IS
BEGIN

dbms_output.put_line('Product of a,b = ' || a * b);

END PRODUCT;
PROCEDURE PRODUCT(a number,b number,c number) IS

© Copy rights are reserved.

 127
BEGIN

dbms_output.put_line('Product of a,b = ' || a * b * c);

END PRODUCT;
BEGIN

p(i);
p(j);
product(4,5);
product(4,5,6);
END;

Output:
a=5
b=5
Product of a,b = 20
Product of a,b = 120

BENEFITS OF OVERLOADING

 Supporting many data combinations

 Fitting the program to the user.

RESTRICTIONS ON OVERLOADING

 Overloaded programs with parameter lists that differ only by name must be called using
named notation.
 The parameter list of overloaded programs must differ by more than parameter mode.
 All of the overloaded programs must be defined within the same PL/SQL scope or block.
 Overloaded functions must differ by more than their return type.
IMPORTANT POINTS ABOUT SUBPROGRAMS
 When a stored subprogram is created, it is stored in the data dictionary.
 The subprogram is stored in compile form which is known as p-code in addition to the
source text.
 The p-code has all of the references in the subprogram evaluated, and the source code is
translated into a form that is easily readable by PL/SQL engine.
 When the subprogram is called, the p-code is read from the disk, if necessary, and
executed.
 Once it reads from the disk, the p-code is stored in the shared pool portion of the system
global area (SGA), where it can be accessed by multiple users as needed.
 Like all of the contents of the shared pool, p-code is aged out of the shared pool according
to a least recently used (LRU) algorithm.
© Copy rights are reserved.
 128
 Subprograms can be local.
 Local subprograms must be declared in the declarative section of PL/SQL block and called
from the executable section.
 Subprograms can not have the declarative section separately.
 Stored subprograms can have local subprograms;
 Local subprograms also can have local subprograms.
 If the subprogram contains a variable with the same name as the column name of the
table then use the dot method to differentiate (subprogram_name.sal).
 Subprograms can be invalidated.
PROCEDURES V FUNCTIONS
 Procedures may return through out and in out parameters where as function must return.
 Procedures can not have return clause where as functions must.
 We can use call statement directly for executing procedure where as we need to declare a
variable in case of functions.
 Functions can use in select statements where as procedures can not.
 Functions can call from reports environment where as procedures can not.
 We can use exec for executing procedures where as functions can not.
 Function can be used in dbms_output where as procedure can not.
 Procedure call is a standalone executable statement where as function call is a part of an
executable statement.
STORED V LOCAL SUBPROGRAMS
 The stored subprogram is stored in compiled p-code in the database, when the procedure
is called it does not have to be compiled.
The local subprogram is compiled as part of its containing block. If the containing
block is anonymous and is run multiple times, the subprogram has to be compiled
each time.
 Stored subprograms can be called from any block submitted by a user who has execute
privileges on the subprogram.
Local subprograms can be called only from the block containing the subprogram.
 By keeping the stored subprogram code separate from the calling block, the calling block
is shorter and easier to understand.
The local subprogram and the calling block are one and the same, which can lead to
part confusion. If a change to the calling block is made, the subprogram will be
recompiled as of the recompilation of the containing block.
 The compiled p-code can be pinned in the shared pool using the DBMS_SHARED_POOL
Package. This can improve performance.
Local subprograms cannot be pinned in the shared pool by themselves.

© Copy rights are reserved.

 129
 Stand alone stored subprograms can not be overloaded, but packaged subprograms can be
overloaded within the same package.
 Local subprograms can be overloaded within the same block.
Ex1:
CREATE OR REPLACE PROCEDURE P IS
BEGIN

dbms_output.put_line('Stored subprogram');
END;

Output:
SQL> exec p
Stored subprogram
Ex2:
DECLARE
PROCEDURE P IS
BEGIN

dbms_output.put_line('Local subprogram');
END;
BEGIN

p;
END;

Output:
Local subprogram
COMPILING SUBPROGRAMS
 SQL> Alter procedure P1 compile;
 SQL> Alter function F1 compile;
SUBPROGRAMS DEPENDECIES
 A stored subprogram is marked as invalid in the data dictionary if it has compile errors.
 A stored subprogram can also become invalid if a DDL operation is performed on one of its
dependent objects.
 If a subprogram is invalidated, the PL/SQL engine will automatically attempt to recompile in
the next time it is called.
 If we have two procedures like P1 and P2 in which P1 depends on P2. If we compile P2
then P1 is invalidated.
SUBPROGRAMS DEPENDENCIES IN REMOTE DATABASES
 We will call remote subprogram using connect string like P1@ORACLE;
 If we have two procedures like P1 and P2 in which P1 depends on P2 but P2 was in remote
database. If we compile P2 it will not invalidate P1 immediately because the data
dictionary does not track remote dependencies.

© Copy rights are reserved.

 130
 Instead the validity of remote objects is checked at runtime. When P1 is called, the remote
data dictionary is queried to determine the status of P2.
 P1 and P2 are compared to see it P1 needs to be recompiled, there are two different
methods of comparision
 Timestamp Model
 Signature Model

TIMESTAMP MODEL

 This is the default model used by oracle.

 With this model, the timestamps of the last modifications of the two objects are
compared.
 The last_ddl_time field of user_objects contains the timestamp.
 If the base object has a newer timestamp than the dependent object, the
dependent object will be recompiled.

ISSUES WITH THIS MODEL

 If the objects are in different time zones, the comparison is invalid.

 When P1 is in a client side PL/SQL engine such as oracle forms, in this case it may not
possible to recompile P1, because the source for it may not be included with the forms.

SIGNATURE MODEL
 When a procedure is created, a signature is stored in the data dictionary in addition to the
p-code.
 The signature encodes the types and order of the parametes.
 When P1 is compiled the first time, the signature of P2 is included. Thus, P1 only needs to
recompiled when the signature of P2 changes.
 In order to use the signature model, the parameter REMOTE_DEPENDENCIES_MODE must be set
to SIGNATURE. This is a parameter in the database initialization file.

THREE WAYS OF SETTING THIS MODE

 Add the line REMOTE_DEPENDENCIES_MODE=SIGNATURE to the database initialization file. The

next time the database is started, the mode will be set to SIGNATURE for all sessions.
 Alter system set remote_dependencies_mode = signature;
This will affect the entire database (all sessions) from the time the statement is
issued. You must have the ALTER SYSTEM privilege to issue this command.
 Alter session set remote_dependencies_mode = signature;

© Copy rights are reserved.

 131
This will only affect your session

ISSUES WITH THIS MODEL

 Signatures don’t get modified if the default values of formal parameters are
changed.

 Suppose P2 has a default value for one of its parameters, and P1 is using this
default value. If the default in the specification for P2 is changed, P1 will not be
recompiled by default. The old value for the default parameter will still be used until
P1 is manually recompiled.
 If P1 is calling a packaged procedure P2, and a new overloaded version of P2 is added to
the remote package, the signature is not changed. P1 will still use the old version(not the
new overloaded one) until P1 is recompiled manually.

FORWARD DECLERATION

Before going to use the procedure in any other subprogram or other block , you must declare the
prototype of the procedure in declarative section.

Ex1:
DECLARE
PROCEDURE P1 IS
BEGIN

dbms_output.put_line('From procedure p1');

p2;
END P1;
PROCEDURE P2 IS
BEGIN

dbms_output.put_line('From procedure p2');

p3;
END P2;
PROCEDURE P3 IS
BEGIN

dbms_output.put_line('From procedure p3');

END P3;
BEGIN

p1;

© Copy rights are reserved.

 132
END;

Output:
p2;
*
ERROR at line 5:
ORA-06550: line 5, column 1:
PLS-00313: 'P2' not declared in this scope
ORA-06550: line 5, column 1:
PL/SQL: Statement ignored
ORA-06550: line 10, column 1:
PLS-00313: 'P3' not declared in this scope
ORA-06550: line 10, column 1:
PL/SQL: Statement ignored

Ex2:
DECLARE

PROCEDURE P2; -- forward declaration

PROCEDURE P3;
PROCEDURE P1 IS
BEGIN

dbms_output.put_line('From procedure p1');

p2;
END P1;
PROCEDURE P2 IS
BEGIN

dbms_output.put_line('From procedure p2');

p3;
END P2;
PROCEDURE P3 IS
BEGIN

dbms_output.put_line('From procedure p3');

© Copy rights are reserved.
 133
END P3;
BEGIN

p1;
END;

Output:
From procedure p1
From procedure p2
From procedure p3

PRIVILEGES AND STORED SUBPROGRAMS

EXECUTE PREVILEGE

 For stored subprograms and packages the relevant privilege is EXECUTE.

 If user A had the procedure called emp_proc then user A grants execute privilege on
procedure to user B with the following command.
SQL> Grant execute on emp_proc to user B.
 Then user B can run the procedure by issuing
SQL> Exec user A.emp_proc

userA created the following procedure

CREATE OR REPLACE PROCEDURE P IS

cursor is select *from student1;

BEGIN

for v in c loop
insert into student2 values(v.no,v.name,v.marks);
end loop;
END P;

userA granted execute privilege to userB using

SQL> grant execute on p to userB

Then userB executed the procedure

SQL> Exec userA.p
If suppose userB also having student2 table then which table will populate whether userA’s or
userB’s.

© Copy rights are reserved.

 134
The answer is userA’s student2 table only because by default the procedure will execute under
the privlige set of its owner.
The above procedure is known as definer’s procedure.
HOW TO POPULATE USER B’s TABLE

 Oracle introduces Invoker’s and Definer’s rights.

 By default it will use the definer’s rights.
 An invoker’s rights routine can be created by using AUTHID clause to populate the
userB’s table.
 It is valid for stand-alone subprograms, package specifications, and object type
specifications only.
userA created the following procedure
CREATE OR REPLACE PROCEDURE P
AUTHID CURRENT_USER IS

cursor is select *from student1;

BEGIN

for v in c loop
insert into student2 values(v.no,v.name,v.marks);
end loop;
END P;

Then grant execute privilege on p to userB.

Executing the procedure by userB, which populates userB’s table.
The above procedure is called invoker’s procedure.
Instead of current_user of authid clause, if you use definer then it will be called definer’
procedure.
STORED SUBPROGRAMS AND ROLES

we have two users saketh and sudha in which saketh has student table and sudha does not.
Sudha is going to create a procedure based on student table owned by saketh. Before doing this
saketh must grant the permissions on this table to sudha.
SQL> conn saketh/saketh
SQL> grant all on student to sudha;
then sudha can create procedure
SQL> conn sudha/sudha

CREATE OR REPLACE PROCEDURE P IS

cursor c is select *from saketh.student;

BEGIN

for v in c loop
dbms_output.put_line(‘No = ‘ || v.no);
end loop;

© Copy rights are reserved.

 135
END P;

here procedure will be created.

If the same privilege was granted through a role it wont create the procedure.

Examine the following code

SQL> conn saketh/saketh

SQL> create role saketh_role;
SQL> grant all on student to saketh_role;
SQL> grant saketh_role to sudha;
then conn sudha/sudha

CREATE OR REPLACE PROCEDURE P IS

cursor c is select *from saketh.student;

BEGIN

for v in c loop
dbms_output.put_line(‘No = ‘ || v.no);
end loop;
END P;

The above code will raise error instead of creating procedure .

This is because of early binding which PL/SQL uses by default in which references are evaluated in
compile time but when you are using a role this will affect immediately.

ISSUES WITH INVOKER’S RIGHTS

 In an invoker’s rights routine, external references in SQL statements will be resolved using
the caller’s privilege set.
 But references in PL/SQL statements are still resolved under the owner’s privilege set.
TRIGGERS, VIEWS AND INVOKER’S RIGHTS

 A database trigger will always be executed with definer’s rights and will execute under the
privilege set of the schema that owns the triggering table.
 This is also true for PL/SQL function that is called from a view. In this case, the function will
execute under the privilege set of the view’s owner.

PACKAGES

© Copy rights are reserved.

 136
A package is a container for related objects. It has specification and body. Each of them is
stored separately in data dictionary.

PACKAGE SYNTAX
Create or replace package <package_name> is
-- package specification includes subprograms signatures, cursors and global or
public variables.
End <package_name>;

Create or replace package body <package_name> is

-- package body includes body for all the subprograms declared in the spec, private
Variables and cursors.
Begin
-- initialization section
Exception
-- Exception handling seciton
End <package_name>;

IMPORTANT POINTS ABOUT PACKAGES

 The first time a packaged subprogram is called or any reference to a packaged variable or
type is made, the package is instantiated.
 Each session will have its own copy of packaged variables, ensuring that two sessions
executing subprograms in the same package use different memory locations.
 In many cases initialization needs to be run the first time the package is instantiated
within a session. This can be done by adding initialization section to the package body
after all the objects.
 Packages are stored in the data dictionary and can not be local.
 Packaged subprograms has an advantage over stand alone subprogram.
 When ever any reference to package, the whole package p-code was stored in shared pool
of SGA.

 Package may have local subprograms.

 You can include authid clause inside the package spec not in the body.
 The execution section of a package is know as initialization section.
 You can have an exception section at the bottom of a package body.
 Packages subprograms are not invalidated.
COMPILING PACKAGES
 SQL> Alter package PKG compile;
 SQL> Alter package PKG compile specification;
© Copy rights are reserved.
 137
 SQL> Alter package PKG compile body;
PACKAGE DEPENDENCIES
 The package body depends on the some objects and the package header.
 The package header does not depend on the package body, which is an advantage of
packages.
 We can change the package body with out changing the header.
PACKAGE RUNTIME STATE
Package runtime state is differ for the following packages.
 Serially reusable packages
 Non serially reusable packages

SERIALLY REUSABLE PACKAGES

To force the oracle to use serially reusable version then include PRAGMA SERIALLY_REUSABLE in both
package spec and body, Examine the following package.
CREATE OR REPLACE PACKAGE PKG IS

pragma serially_reusable;
procedure emp_proc;
END PKG;

------------------------------
CREATE OR REPLACE PACKAGE BODY PKG IS

pragma serially_reusable;
cursor c is select ename from emp;
PROCEDURE EMP_PROC IS

© Copy rights are reserved.

 138
v_ename emp.ename%type;
v_flag boolean := true;
v_numrows number := 0;
BEGIN

if not c%isopen then

open c;
end if;
while v_flag loop
fetch c into v_ename;
v_numrows := v_numrows + 1;
if v_numrows = 5 then
v_flag := false;
end if;
dbms_output.put_line('Ename = ' || v_ename);
end loop;
END EMP_PROC;
END PKG;

SQL> exec pkg.emp_proc

Ename = SMITH

Ename = ALLEN

Ename = WARD

Ename = JONES
Ename = MARTIN

 The above package displays the same output for each execution even though the cursor is
not closed.
 Because the serially reusable version resets the state of the cursor each time it was called.

NON SERIALL Y REUSABLE PACKAGES

This is the default version used by the oracle, examine the following package.

CREATE OR REPLACE PACKAGE PKG IS

procedure emp_proc;
END PKG;

CREATE OR REPLACE PACKAGE BODY PKG IS

cursor c is select ename from emp;

PROCEDURE EMP_PROC IS

v_ename emp.ename%type;
v_flag boolean := true;

© Copy rights are reserved.

 139
v_numrows number := 0;
BEGIN

if not c%isopen then

open c;
end if;
while v_flag loop
fetch c into v_ename;
v_numrows := v_numrows + 1;
if v_numrows = 5 then
v_flag := false;
end if;
dbms_output.put_line('Ename = ' || v_ename);
end loop;
END EMP_PROC;
END PKG;

SQL> exec pkg.emp_proc

Ename = SMITH

Ename = ALLEN

Ename = WARD

Ename = JONES

Ename = MARTIN

 The above package displays the different output for each execution even though the
cursor is not closed.
 Because the non-serially reusable version remains the state of the cursor over database
calls.

DEPENDENCIES OF PACKAGE RUNTIME STATE

Dependencies can exists between package state and anonymous blocks.

Examine the following program
Create this package in first session
CREATE OR REPLACE PACKAGE PKG IS

v number := 5;
procedure p;
END PKG;

CREATE OR REPLACE PACKAGE BODY PKG IS

PROCEDURE P IS

© Copy rights are reserved.

 140
BEGIN

dbms_output.put_line('v = ' || v);

v := 10;
dbms_output.put_line('v = ' || v);
END P;
END PKG;

Connect to second session, run the following code.

BEGIN

pkg.p;
END;

The above code wil work.

Go back to first session and recreate the package using create.
Then connect to second session and run the following code again.

BEGIN

pkg.p;
END;

This above code will not work because of the following.

 The anonymous block depends on pkg. This is compile time dependency.
 There is also a runtime dependency on the packaged variables, since each session has its
own copy of packaged variables.
 Thus when pkg is recompiled the runtime dependency is followed, which invalidates the
block and raises the oracle error.
 Runtime dependencies exist only on package state. This includes variables and cursors
declared in a package.
 If the package had no global variables, the second execution of the anonymous block
would have succeeded.
PURITY LEVELS
In general, calls to subprograms are procedural, they cannot be called from SQL statements.
However, if a stand-alone or packaged function meets certain restrictions, it can be called during
execution of a SQL statement.
User-defined functions are called the same way as built-in functions but it must meet different
restrictions. These restrictions are defined in terms of purity levels.
There are four types of purity levels.
WNDS -- Writes No Database State

© Copy rights are reserved.

 141
RNDS -- Reads No Database State
WNPS -- Writes No Package State
RNPS -- Reads No Package State

In addition to the preceding restrictions, a user-defined function must also meet the following
requirements to be called from a SQL statement.
 The function has to be stored in the database, either stand-alone or as part of a
package.
 The function can take only in parametes.
 The formal parameters must use only database types, not PL/SQL types such as
boolean or record.
 The return type of the function must also be a database type.
 The function must not end the current transaction with commit or rollback, or
rollback to a savepoint prior to the function execution.
 It also must not issue any alter session or alter system commands.

RESTRICT_REFERENCES

For packaged functions, however, the RESTRICT_REFERENCES pragma is required to specify the
purity level of a given function.

Syntax:
PRAGMA RESTRICT_REFERENCES(subprogram_name or package_name, WNDS [,WNPS]

[,RNDS] [,RNPS]);

Ex:
CREATE OR REPLACE PACKAGE PKG IS

function fun1 return varchar;

pragma restrict_references(fun1,wnds);
function fun2 return varchar;
pragma restrict_references(fun2,wnds);
END PKG;

CREATE OR REPLACE PACKAGE BODY PKG IS

FUNCTION FUN1 return varchar IS

BEGIN

update dept set deptno = 11;

return 'hello';
END FUN1;

FUNCTION FUN2 return varchar IS

© Copy rights are reserved.

 142
BEGIN

update dept set dname ='aa';

return 'hello';
END FUN2;
END PKG;

The above package body will not created, it will give the following erros.

PLS-00452: Subprogram 'FUN1' violates its associated pragma

PLS-00452: Subprogram 'FUN2' violates its associated pragma

CREATE OR REPLACE PACKAGE BODY PKG IS

FUNCTION FUN1 return varchar IS

BEGIN

return 'hello';
END FUN1;

FUNCTION FUN2 return varchar IS

BEGIN

return 'hello';
END FUN2;
END PKG;

Now the package body will be created.

DEFAULT

If there is no RESTRICT_REFERENCES pragma associated with a given packaged function, it will not
have any purity level asserted. However, you can change the default purity level for a package.
The DEFAULT keyword is used instead of the subprogram name in the pragma.

Ex:
CREATE OR REPLACE PACKAGE PKG IS

pragma restrict_references(default,wnds);
function fun1 return varchar;
function fun2 return varchar;
END PKG;

CREATE OR REPLACE PACKAGE BODY PKG IS

© Copy rights are reserved.
 143
FUNCTION FUN1 return varchar IS

BEGIN

update dept set deptno = 11;

return 'hello';
END FUN1;

FUNCTION FUN2 return varchar IS

BEGIN

update dept set dname ='aa';

return 'hello';
END FUN2;
END PKG;

The above package body will not created, it will give the following erros because the pragma will
apply to all the functions.

PLS-00452: Subprogram 'FUN1' violates its associated pragma

PLS-00452: Subprogram 'FUN2' violates its associated pragma

CREATE OR REPLACE PACKAGE BODY PKG IS

FUNCTION FUN1 return varchar IS

BEGIN

return 'hello';
END FUN1;

FUNCTION FUN2 return varchar IS

BEGIN

return 'hello';
END FUN2;
END PKG;

Now the package body will be created.

TRUST

If the TRUST keyword is present, the restrictions listed in the pragma are not enforced. Rather,
they are trusted to be true.
Ex:
CREATE OR REPLACE PACKAGE PKG IS

function fun1 return varchar;

pragma restrict_references(fun1,wnds,trust);

© Copy rights are reserved.

 144
function fun2 return varchar;
pragma restrict_references(fun2,wnds,trust);
END PKG;

CREATE OR REPLACE PACKAGE BODY PKG IS

FUNCTION FUN1 return varchar IS

BEGIN

update dept set deptno = 11;

return 'hello';
END FUN1;

FUNCTION FUN2 return varchar IS

BEGIN

update dept set dname ='aa';

return 'hello';
END FUN2;
END PKG;

The above package will be created successfully.

IMPORTANT POINTS ABOUT RESTRICT_REFERENCES

 This pragma can appear anywhere in the package specification, after the function
declaration.
 It can apply to only one function definition.
 For overload functions, the pragma applies to the nearest definition prior to the
Pragma.
 This pragma is required only for packages functions not for stand-alone functions.
 The Pragma can be declared only inside the package specification.
 The pragma is checked at compile time, not runtime.
 It is possible to specify without any purity levels when trust or combination of
default and trust keywords are present.

PINNING IN THE SHARED POOL

The shared pool is the portion of the SGS that contains, among other things, the p-code of
compiled subprograms as they are run. The first time a stored a store subprogram is called, the
p-code is loaded from disk into the shared pool. Once the object is no longer referenced, it is free
to be aged out. Objects are aged out of the shared pool using an LRU(Least Recently Used)
algorithm.

© Copy rights are reserved.

 145

The DBMS_SHARED_POOL package allows you to pin objects in the shared pool. When an object is
pinned, it will never be aged out until you request it, no matter how full the pool gets or how
often the object is accessed. This can improve performance, as it takes time to reload a package
from disk.
DBMS_SHARED_POOL has four procedures
 KEEP
 UNKEEP
 SIZES
 ABORTED_REQUEST_THRESHOLD
KEEP

The DBMS_SHARED_POOL.KEEP procedure is used to pin objects in the pool.

Syntax: PROCEDURE KEEP(object_name varchar2,flag char default ‘P’);

Here the flag represents different types of flag values for different types of objects.

P -- Package, function or procedure

Q -- Sequence
R -- Trigger
C -- SQL Cursor
T -- Object type
JS -- Java source
JC -- Java class
JR -- Java resource
JD -- Java shared data

UNKEEP

UNKEEP is the only way to remove a kept object from the shared pool, without restarting the
database. Kept objects are never aged out automatically.

Syntax: PROCEDURE UNKEEP(object_name varchar2, flag char default ‘P’);

SIZES

SIZES will echo the contents of the shared pool to the screen.
Syntax: PROCEDURE SIZES(minsize number);
Objects with greater than the minsize will be returned. SIZES uses DBMS_OUTPUT to return the data.
ABORTED_REQUEST_THRESHOLD

© Copy rights are reserved.

 146
When the database determines that there is not enough memory in the shared pool to satisfy a
given request, it will begin aging objects out until there is enough memory. It enough objects
are aged out, this can have a performance impact on other database sessions. The
ABORTED_REQUEST_THRESHOLD can be used to remedy this.
Syntax: PROCEDURE ABORTED_REQUEST_THRESHOLD(threshold_size number);

Once this procedure is called, oracle will not start aging objects from the pool unless at least
threshold_size bytes is needed.

DATA MODEL FOR SUBPROGRAMS AND PACKAGES

 USER_OBJECTS
 USER_SOURCE
 USER_ERRORS
 DBA_OBJECTS
 DBA_SOURCE
 DBA_ERRORS
 ALL_OBJECTS
 ALL_SOURCE
 ALL_ERRORS

CURSORS

Cursor is a pointer to memory location which is called as context area which contains the
information necessary for processing, including the number of rows processed by the statement,

© Copy rights are reserved.

 147
a pointer to the parsed representation of the statement, and the active set which is the set of
rows returned by the query.
Cursor contains two parts
 Header
 Body
Header includes cursor name, any parameters and the type of data being loaded.
Body includes the select statement.

Ex: Cursor c(dno in number) return dept%rowtype is select *from dept;

In the above
Header – cursor c(dno in number) return dept%rowtype
Body – select *from dept
CURSOR TYPES
 Implicit (SQL)
 Explicit
 Parameterized cursors
 REF cursors
CURSOR STAGES
 Open
 Fetch
 Close
CURSOR ATTRIBUTES
 %found
 %notfound
 %rowcount
 %isopen
 %bulk_rowcount
 %bulk_exceptions

CURSOR DECLERATION
Syntax:
Cursor <cursor_name> is select statement;
Ex: Cursor c is select *from dept;
CURSOR LOOPS
 Simple loop
 While loop
 For loop

© Copy rights are reserved.

 148
SIMPLE LOOP

Syntax:
Loop
Fetch <cursor_name> into <record_variable>;
Exit when <cursor_name> % notfound;
<statements>;
End loop;
Ex:
DECLARE

cursor c is select * from student;

v_stud student%rowtype;
BEGIN

open c;
loop
fetch c into v_stud;
exit when c%notfound;
dbms_output.put_line('Name = ' || v_stud.name);
end loop;
close c;
END;

Output:
Name = saketh
Name = srinu
Name = satish
Name = sudha

WHILE LOOP

Syntax:
While <cursor_name> % found loop
Fetch <cursor_name> nto <record_variable>;
<statements>;
End loop;
Ex:
DECLARE

cursor c is select * from student;

v_stud student%rowtype;
BEGIN

© Copy rights are reserved.

 149
open c;
fetch c into v_stud;
while c%found loop
fetch c into v_stud;
dbms_output.put_line('Name = ' || v_stud.name);
end loop;
close c;
END;

Output:

Name = saketh
Name = srinu
Name = satish
Name = sudha

FOR LOOP

Syntax:
for <record_variable> in <cursor_name> loop
<statements>;
End loop;
Ex:
DECLARE

cursor c is select * from student;

BEGIN

for v_stud in c loop

dbms_output.put_line('Name = ' || v_stud.name);
end loop;
END;
Output:
Name = saketh
Name = srinu
Name = satish
Name = sudha
PARAMETARIZED CURSORS
 This was used when you are going to use the cursor in more than one place with different
values for the same where clause.
 Cursor parameters must be in mode.

© Copy rights are reserved.

 150
 Cursor parameters may have default values.
 The scope of cursor parameter is within the select statement.
Ex:
DECLARE

cursor c(dno in number) is select * from dept where deptno = dno;

v_dept dept%rowtype;
BEGIN

open c(20);
loop
fetch c into v_dept;
exit when c%notfound;
dbms_output.put_line('Dname = ' || v_dept.dname || ' Loc = ' || v_dept.loc);
end loop;
close c;
END;

Output:
Dname = RESEARCH Loc = DALLAS

PACKAGED CURSORS WITH HEADER IN SPEC AND BODY IN PACKAGE BODY

 cursors declared in packages will not close automatically.

 In packaged cursors you can modify the select statement without making any changes to
the cursor header in the package specification.
 Packaged cursors with must be defined in the package body itself, and then use it as
global for the package.
 You can not define the packaged cursor in any subprograms.
 Cursor declaration in package with out body needs the return clause.

Ex1:
CREATE OR REPLACE PACKAGE PKG IS

cursor c return dept%rowtype is select * from dept;

© Copy rights are reserved.

 151
procedure proc is
END PKG;

CREATE OR REPLACE PAKCAGE BODY PKG IS

cursor c return dept%rowtype is select * from dept;

PROCEDURE PROC IS
BEGIN

for v in c loop
dbms_output.put_line('Deptno = ' || v.deptno || ' Dname = ' ||
v.dname || ' Loc = ' || v.loc);
end loop;
END PROC;
END PKG;

Output: SQL> exec pkg.proc

Deptno = 10 Dname = ACCOUNTING Loc = NEW YORK

Deptno = 20 Dname = RESEARCH Loc = DALLAS

Deptno = 30 Dname = SALES Loc = CHICAGO

Deptno = 40 Dname = OPERATIONS Loc = BOSTON

Ex2:
CREATE OR REPLACE PAKCAGE BODY PKG IS

cursor c return dept%rowtype is select * from dept where deptno > 20;
PROCEDURE PROC IS
BEGIN

for v in c loop
dbms_output.put_line('Deptno = ' || v.deptno || ' Dname = ' ||
v.dname || ' Loc = ' || v.loc);
end loop;
END PROC;
END PKG;

Output:
SQL> exec pkg.proc
Deptno = 30 Dname = SALES Loc = CHICAGO

Deptno = 40 Dname = OPERATIONS Loc = BOSTON

REF CURSORS AND CURSOR VARIABLES

 This is unconstrained cursor which will return different types depends upon the user input.
 Ref cursors can not be closed implicitly.

© Copy rights are reserved.

 152
 Ref cursor with return type is called strong cursor.
 Ref cursor with out return type is called weak cursor.
 You can declare ref cursor type in package spec as well as body.
 You can declare ref cursor types in local subprograms or anonymous blocks.
 Cursor variables can be assigned from one to another.
 You can declare a cursor variable in one scope and assign another cursor variable with
different scope, then you can use the cursor variable even though the assigned cursor
variable goes out of scope.
 Cursor variables can be passed as a parameters to the subprograms.
 Cursor variables modes are in or out or in out.
 Cursor variables can not be declared in package spec and package body (excluding
subprograms).
 You can not user remote procedure calls to pass cursor variables from one server to
another.
 Cursor variables can not use for update clause.
 You can not assign nulls to cursor variables.
 You can not compare cursor variables for equality, inequality and nullity.

Ex:
CREATE OR REPLACE PROCEDURE REF_CURSOR(TABLE_NAME IN VARCHAR) IS

type t is ref cursor;

c t;
v_dept dept%rowtype;
type r is record(ename emp.ename%type,job emp.job%type,sal emp.sal%type);
v_emp r;
v_stud student.name%type;
BEGIN

if table_name = 'DEPT' then

open c for select * from dept;
elsif table_name = 'EMP' then
open c for select ename,job,sal from emp;
elsif table_name = 'STUDENT' then
open c for select name from student;
end if;
loop
if table_name = 'DEPT' then
fetch c into v_dept;
exit when c%notfound;
© Copy rights are reserved.
 153
dbms_output.put_line('Deptno = ' || v_dept.deptno || ' Dname = ' ||
v_dept.dname || ' Loc = ' || v_dept.loc);
elsif table_name = 'EMP' then
fetch c into v_emp;
exit when c%notfound;
dbms_output.put_line('Ename = ' || v_emp.ename || ' Job = ' || v_emp.job
|| ' Sal = ' || v_emp.sal);
elsif table_name = 'STUDENT' then
fetch c into v_stud;
exit when c%notfound;
dbms_output.put_line('Name = ' || v_stud);
end if;
end loop;
close c;
END;

Output: SQL> exec ref_cursor('DEPT')

Deptno = 10 Dname = ACCOUNTING Loc = NEW YORK

Deptno = 20 Dname = RESEARCH Loc = DALLAS

Deptno = 30 Dname = SALES Loc = CHICAGO

Deptno = 40 Dname = OPERATIONS Loc = BOSTON

SQL> exec ref_cursor('EMP')

Ename = SMITH Job = CLERK Sal = 800
Ename = ALLEN Job = SALESMAN Sal = 1600
Ename = WARD Job = SALESMAN Sal = 1250
Ename = JONES Job = MANAGER Sal = 2975
Ename = MARTIN Job = SALESMAN Sal = 1250
Ename = BLAKE Job = MANAGER Sal = 2850
Ename = CLARK Job = MANAGER Sal = 2450
Ename = SCOTT Job = ANALYST Sal = 3000
Ename = KING Job = PRESIDENT Sal = 5000
Ename = TURNER Job = SALESMAN Sal = 1500
Ename = ADAMS Job = CLERK Sal = 1100
Ename = JAMES Job = CLERK Sal = 950
Ename = FORD Job = ANALYST Sal = 3000
Ename = MILLER Job = CLERK Sal = 1300
SQL> exec ref_cursor('STUDENT')
Name = saketh
Name = srinu
© Copy rights are reserved.
 154
Name = satish
Name = sudha

CURSOR EXPRESSIONS
 You can use cursor expressions in explicit cursors.
 You can use cursor expressions in dynamic SQL.
 You can use cursor expressions in REF cursor declarations and variables.
 You can not use cursor expressions in implicit cursors.
 Oracle opens the nested cursor defined by a cursor expression implicitly as soon as it
fetches the data containing the cursor expression from the parent or outer cursor.
 Nested cursor closes if you close explicitly.
 Nested cursor closes whenever the outer or parent cursor is executed again or closed or
canceled.
 Nested cursor closes whenever an exception is raised while fetching data from a parent
cursor.
 Cursor expressions can not be used when declaring a view.
 Cursor expressions can be used as an argument to table function.
 You can not perform bind and execute operations on cursor expressions when using the
cursor expressions in dynamic SQL.

USING NESTED CURSORS OR CURSOR EXPRESSIONS

Ex:
DECLARE

cursor c is select ename,cursor(select dname from dept d where e.empno = d.deptno)

from emp e;
type t is ref cursor;
c1 t;
c2 t;
v1 emp.ename%type;
v2 dept.dname%type;
BEGIN

open c;
loop
fetch c1 into v1;
exit when c1%notfound;
fetch c2 into v2;
exit when c2%notfound;
dbms_output.put_line('Ename = ' || v1 || ' Dname = ' || v2);

© Copy rights are reserved.

 155
end loop;
end loop;
close c;
END;

CURSOR CLAUSES
 Return
 For update
 Where current of
 Bulk collect

RETURN

Cursor c return dept%rowtype is select *from dept;

Or
Cursor c1 is select *from dept;
Cursor c return c1%rowtype is select *from dept;
Or
Type t is record(deptno dept.deptno%type, dname dept.dname%type);
Cursor c return t is select deptno, dname from dept;

FOR UPDATE AND WHERE CURRENT OF

Normally, a select operation will not take any locks on the rows being accessed. This will allow
other sessions connected to the database to change the data being selected. The result set is still
consistent. At open time, when the active set is determined, oracle takes a snapshot of the table.
Any changes that have been committed prior to this point are reflected in the active set. Any
changes made after this point, even if they are committed, are not reflected unless the cursor is
reopened, which will evaluate the active set again.

However, if the FOR UPDATE caluse is pesent, exclusive row locks are taken on the rows in the
active set before the open returns. These locks prevent other sessions from changing the rows in
the active set until the transaction is committed or rolled back. If another session already has
locks on the rows in the active set, then SELECT … FOR UPDATE operation will wait for these locks to
be released by the other session. There is no time-out for this waiting period. The SELECT…FOR

UPDATE will hang until the other session releases the lock. To handle this situation, the NOWAIT

clause is available.
Syntax:
Select …from … for update of column_name [wait n];

© Copy rights are reserved.

 156

If the cursor is declared with the FOR UPDATE clause, the WHERE CURRENT OF clause can be used
in an update or delete statement.

Syntax:
Where current of cursor;
Ex:
DECLARE

cursor c is select * from dept for update of dname;

BEGIN

for v in c loop
update dept set dname = 'aa' where current of c;
commit;
end loop;
END;

BULK COLLECT

 This is used for array fetches

 With this you can retrieve multiple rows of data with a single roundtrip.
 This reduces the number of context switches between the pl/sql and sql engines.
 Reduces the overhead of retrieving data.
 You can use bulk collect in both dynamic and static sql.
 You can use bulk collect in select, fetch into and returning into clauses.
 SQL engine automatically initializes and extends the collections you reference in the bulk
collect clause.
 Bulk collect operation empties the collection referenced in the into clause before executing
the query.
 You can use the limit clause of bulk collect to restrict the no of rows retrieved.
 You can fetch into multible collections with one column each.
 Using the returning clause we can return data to the another collection.

BULK COLLECT IN FETCH

Ex:
© Copy rights are reserved.
 157
DECLARE

Type t is table of dept%rowtype;

nt t;
Cursor c is select *from dept;
BEGIN

Open c;
Fetch c bulk collect into nt;
Close c;
For i in nt.first..nt.last loop
dbms_output.put_line('Dname = ' || nt(i).dname || ' Loc = ' ||
nt(i).loc);
end loop;
END;

Output:
Dname = ACCOUNTING Loc = NEW YORK

Dname = RESEARCH Loc = DALLAS

Dname = SALES Loc = CHICAGO

Dname = OPERATIONS Loc = BOSTON

BULK COLLECT IN SELECT

Ex:
DECLARE

Type t is table of dept%rowtype;

Nt t;
BEGIN

Select * bulk collect into nt from dept;

for i in nt.first..nt.last loop
dbms_output.put_line('Dname = ' || nt(i).dname || ' Loc = ' ||
nt(i).loc);
end loop;
END;

Output:
Dname = ACCOUNTING Loc = NEW YORK

Dname = RESEARCH Loc = DALLAS

Dname = SALES Loc = CHICAGO

Dname = OPERATIONS Loc = BOSTON

LIMIT IN BULK COLLECT

© Copy rights are reserved.

 158
You can use this to limit the number of rows to be fetched.
Ex:
DECLARE

Type t is table of dept%rowtype;

nt t;
Cursor c is select *from dept;
BEGIN

Open c;
Fetch c bulk collect into nt limit 2;
Close c;
For i in nt.first..nt.last loop
dbms_output.put_line('Dname = ' || nt(i).dname || ' Loc = ' || nt(i).loc);
end loop;
END;

Output:
Dname = ACCOUNTING Loc = NEW YORK

Dname = RESEARCH Loc = DALLAS

MULTIPLE FETCHES IN INTO CLAUSE

Ex1: DECLARE

Type t is table of dept.dname%type;

nt t;
Type t1 is table of dept.loc%type;
nt1 t;
Cursor c is select dname,loc from dept;
BEGIN

Open c;
Fetch c bulk collect into nt,nt1;
Close c;
For i in nt.first..nt.last loop
dbms_output.put_line('Dname = ' || nt(i));
end loop;
For i in nt1.first..nt1.last loop
dbms_output.put_line('Loc = ' || nt1(i));
end loop;
END;

Output:
Dname = ACCOUNTING

Dname = RESEARCH

Ex2: DECLARE

© Copy rights are reserved.

 159
type t is table of dept.dname%type;
type t1 is table of dept.loc%type;
nt t;
nt1 t1;
BEGIN

Select dname,loc bulk collect into nt,nt1 from dept;

for i in nt.first..nt.last loop
dbms_output.put_line('Dname = ' || nt(i));
end loop;
for i in nt1.first..nt1.last loop
dbms_output.put_line('Loc = ' || nt1(i));
end loop;
END;

Output:
Dname = ACCOUNTING

Dname = RESEARCH

RETURNING CLAUSE IN BULK COLLECT

You can use this to return the processed data to the ouput variables or typed variables.
Ex: DECLARE

type t is table of number(2);

nt t := t(1,2,3,4);
type t1 is table of varchar(2);
nt1 t1;
type t2 is table of student%rowtype;
nt2 t2;
BEGIN

select name bulk collect into nt1 from student;

forall v in nt1.first..nt1.last
update student set no = nt(v) where name = nt1(v) returning
no,name,marks bulk collect into nt2;
for v in nt2.first..nt2.last loop
dbms_output.put_line('Marks = ' || nt2(v));
end loop;
END;

Output:
Marks = 100
Marks = 200
POINTS TO REMEMBER
© Copy rights are reserved.
 160
 Cursor name can be up to 30 characters in length.
 Cursors declared in anonymous blocks or subprograms closes automatically when that
block terminates execution.
 %bulk_rowcount and %bulk_exceptions can be used only with forall construct.
 Cursor declarations may have expressions with column aliases.
 These expressions are called virtual columns or calculated columns.

SQL IN PL/SQL

The only statements allowed directly in pl/sql are DML and TCL.

BINDING
Binding a variable is the process of identifying the storage location associated with an identifier
in the program.
Types of binding

 Early binding
 Late binding
 Binding during the compiled phase is early binding.
 Binding during the runtime phase is late binding.
 In early binding compile phase will take longer because of binding work but the
execution is faster.
 In late binding it will shorten the compile phase but lengthens the execution time.
 PL/SQL by default uses early binding.
 Binding also involves checking the database for permissions to access the object
Referenced.
DYNAMIC SQL
 If you use DDL in pl/sql it validates the permissions and existence if requires during
compile time which makes invalid.
 We can avoid this by using Dynamic SQL.

 Dynamic SQL allows you to create a SQL statement dynamically at runtime.

Two techniques are available for Dynamic SQL.

 Native Dynamic SQL

 DBMS_SQL package

USING NATIVE DYNAMIC SQL

© Copy rights are reserved.
 161

USING EXECUTE IMMEDIATE

Ex:
BEGIN

Execute immediate ‘create table student(no number(2),name varchar(10))’;

or
Execute immediate (‘create table student(no number(2),name varchar(10))’);
END;

USING EXECUTE IMMEDIATE WITH PL/SQL VARIABLES

Ex:
DECLARE

v varchar(100);
BEGIN

v := 'create table student(no number(2),name varchar(10))';

execute immediate v;
END;

USING EXECUTE IMMEDIATE WITH BIND VARIABLES AND USING CLAUSE

Ex:
DECLARE

v varchar(100);
BEGIN

v := 'insert into student values(:v1,:v2,:v3)';

execute immediate v using 6,'f',600;
END;

EXECUTING QUERIES WITH OPEN FOR AND USING CLAUSE

Ex:
CREATE OR REPLACE PROCEDURE P(smarks in number) IS

s varchar(100) := 'select *from student where marks > :m';

type t is ref cursor;
c t;
v student%rowtype;
BEGIN

open c for s using smarks;

loop
fetch c into v;
exit when c%notfound;

© Copy rights are reserved.

 162
dbms_output.put_line('Student Marks = ' || v.marks);
end loop;
close c;
END;

Output:
SQL> exec p(100)

Student Marks = 200

Student Marks = 300
Student Marks = 400

QUERIES WITH EXECUTE IMMEDIATE

Ex:
DECLARE

d_name dept.dname%type;
lc dept.loc%type;
v varchar(100);
BEGIN

v := 'select dname from dept where deptno = 10';

execute immediate v into d_name;
dbms_output.put_line('Dname = '|| d_name);
v := 'select loc from dept where dname = :dn';
execute immediate v into lc using d_name;
dbms_output.put_line('Loc = ' || lc);
END;

Output:
Dname = ACCOUNTING
Loc = NEW YORK
VARIABLE NAMES

Ex:
DECLARE

Marks number(3) := 100;

BEGIN

Delete student where marks = marks; -- this will delete all the rows in the
-- student table
END;

This can be avoided by using the labeled blocks.

© Copy rights are reserved.

 163

<<my_block>>
DECLARE

Marks number(3) := 100;

BEGIN

Delete student where marks = my_block.marks; -- delete rows which has

-- a marks of 100
END;

GETTING DATA INTO PL/SQL VARIABLES

Ex:
DECLARE

V1 number;
V2 varchar(2);
BEGIN

Select no,name into v1,v2 from student where marks = 100;

END;

DML AND RECORDS

Ex:
CREATE OR REPLACE PROCEDURE P(srow in student%rowtype) IS

BEGIN

insert into student values srow;

END P;

DECLARE

s student%rowtype;
BEGIN

s.no := 11;
s.name := 'aa';
s.marks := 100;
p(s);
END;

RECORD BASED INSERTS

Ex:
DECLARE

srow student%rowtype;
BEGIN

srow.no := 7;
srow.name := 'cc';
© Copy rights are reserved.
 164
srow.marks := 500;
insert into student values srow;
END;

RECORD BASED UPDATES

Ex:
DECLARE

srow student%rowtype;
BEGIN

srow.no := 6;
srow.name := 'cc';
srow.marks := 500;
update student set row=srow where no = srow.no;
END;

USING RECORDS WITH RETURNING CLAUSE

Ex:
DECLARE

srow student%rowtype;
sreturn student%rowtype;
BEGIN

srow.no := 8;
srow.name := 'dd';
srow.marks := 500;
insert into student values srow returning no,name,marks into sreturn;
dbms_output.put_line('No = ' || sreturn.no);
dbms_output.put_line('No = ' || sreturn.name);
dbms_output.put_line('No = ' || sreturn.marks);
END;

Output:
No = 8
No = dd
No = 500

© Copy rights are reserved.

 165

USING DBMS_SQL PACKAGE

DBMS_SQL is used to execute dynamic SQL from with in PL/SQL. Unlike native dynamic SQL, it
is not built directly into the language, and thus is less efficient. The DBMS_SQL package allows
you to directly control the processing of a statement within a cursor, with operations such as
opening and closing a cursor, parsing a statement, binding input variable, and defining output
variables.
Ex1: DECLARE
cursor_id number;
flag number;
v_stmt varchar(50);
BEGIN

cursor_id := dbms_sql.open_cursor;
v_stmt := 'create table stud(sno number(2),sname varchar(10))';
dbms_sql.parse(cursor_id,v_stmt,dbms_sql.native);
flag := dbms_sql.execute(cursor_id);
dbms_sql.close_cursor(cursor_id);
dbms_output.put_line('Table created');
END;

Output:
Table created
SQL> desc stud
Name Null? Type
----------------------------------------------------------------- -------- --------
SNO NUMBER(2)
SNAME VARCHAR2(10)

Ex2:
CREATE OR REPLACE PROCEDURE DBMS_SQL_PROC(v1 student.no%type,
v2 student.marks%type) is
cursor_id number;
flag number;
v_update varchar(50);
BEGIN

cursor_id := dbms_sql.open_cursor;
v_update := 'update student set marks = :smarks where no = :sno';
dbms_sql.parse(cursor_id,v_update,dbms_sql.native);
dbms_sql.bind_variable(cursor_id,':sno',v1);

© Copy rights are reserved.

 166
dbms_sql.bind_variable(cursor_id,':smarks',v2);
flag := dbms_sql.execute(cursor_id);
dbms_sql.close_cursor(cursor_id);
END DBMS_SQL_PROC;

Output:
SQL> select * from student; -- before execution
NO NA MARKS
---- ------ -- ----------
1 a 100
2 b 200
3 c 300

SQL> exec dbms_sql_proc(2,222)

SQL> select * from student; -- after execution
NO NA MARKS
---- ------ -- ----------
1 a 100
2 b 222
3 c 300
FORALL STATEMENT
This can be used to get the data from the database at once by reducting the number of context
switches which is a transfer of control between PL/SQL and SQL engine.
Syntax:
Forall index_var in
[ Lower_bound..upper_bound |
Indices of indexing_collection |
Values of indexing_collection ]
SQL statement;
FORALL WITH NON-SEQUENTIAL ARRAYS

Ex:
DECLARE

type t is table of student.no%type index by binary_integer;

ibt t;
BEGIN

ibt(1) := 1;
ibt(10) := 2;
forall i in ibt.first..ibt.last

© Copy rights are reserved.

 167
update student set marks = 900 where no = ibt(i);
END;

The above program will give error like ‘element at index [2] does not exists.
You can rectify it in one of the two following ways.

USGAGE OF INDICES OF TO AVOID THE ABOVE BEHAVIOUR

This will be used when you have a collection whose defined rows specify which rows in the
binding array you would like to processed.
Ex:
DECLARE

type t is table of student.no%type index by binary_integer;

ibt t;
type t1 is table of boolean index by binary_integer;
ibt1 t1;
BEGIN

ibt(1) := 1;
ibt(10) := 2;
ibt(100) := 3;
ibt1(1) := true;
ibt1(10) := true;
ibt1(100) := true;
forall i in indices of ibt1
update student set marks = 900 where no = ibt(i);
END;

Ouput:
SQL> select * from student -- before execution
NO NA MARKS
---------- ------------
1 a 100
2 b 200
3 c 300
SQL> select * from student -- after execution
NO NA MARKS
---------- ------------
1 a 900
2 b 900
3 c 900

© Copy rights are reserved.

 168

USGAGE OF VALUES OF TO AVOID THE ABOVE BEHAVIOUR

This will be used when you have a collection of integers whose content identifies the position
in the binding array that you want to be processed by the FORALL statement.
Ex:
DECLARE

type t is table of student.no%type index by binary_integer;

ibt t;
type t1 is table of pls_integer index by binary_integer;
ibt1 t1;
BEGIN

ibt(1) := 1;
ibt(10) := 2;
ibt(100) := 3;
ibt1(11) := 1;
ibt1(15) := 10;
ibt1(18) := 100;
forall i in values of ibt1
update student set marks = 567 where no = ibt(i);
END;

Ouput:

SQL> select * from student -- before execution

NO NA MARKS
---------- ------------
1 a 100
2 b 200
3 c 300

SQL> select * from student -- after execution

NO NA MARKS
---------- ------------
1 a 900
2 b 900
3 c 900
© Copy rights are reserved.
 169

POINTS ABOUT BULK BINDS

 Passing the entire PL/SQL table to the SQL engine in one step is known as bulk bind.
 Bulk binds are done using the forall statement.
 If there is an error processing one of the rows in bulk DML operation, only that row is
rolled back.
POINTS ABOUT RETURING CLAUSE
 This will be used only with DML statements to return data into PL/SQL variables.
 This will be useful in situations like , when performing insert or update or delete if you
want to know the data of the table which has been effected by the DML.

 With out going for another SELECT using RETURNING clause we will get the data which will
avoid a call to RDBMS kernel.

COLLECTIONS

Collections are also composite types, in that they allow you to treat several variables as a unit. A
collection combines variables of the same type.
TYPES
 Varrays
 Nested tables
 Index - by tables (Associate arrays)
VARRAYS
A varray is datatype very similar to an array. A varray has a fixed limit on its size, specified as
part of the declaration. Elements are inserted into varray starting at index 1, up to maximum
lenth declared in the varray type. The maximum size of the varray is 2 giga bytes.
Syntax: Type <type_name> is varray | varying array (<limit>) of <element_type>;

Ex1:
DECLARE

type t is varray(10) of varchar(2);

va t := t('a','b','c','d');
flag boolean;
BEGIN

dbms_output.put_line('Limit = ' || va.limit);

dbms_output.put_line('Count = ' || va.count);
dbms_output.put_line('First Index = ' || va.first);
dbms_output.put_line('Last Index = ' || va.last);
© Copy rights are reserved.
 170
dbms_output.put_line('Next Index = ' || va.next(2));
dbms_output.put_line('Previous Index = ' || va.prior(3));
dbms_output.put_line('VARRAY ELEMENTS');

for i in va.first..va.last loop

dbms_output.put_line('va[' || i || '] = ' || va(i));
end loop;
flag := va.exists(3);
if flag = true then
dbms_output.put_line('Index 3 exists with an element ' || va(3));
else
dbms_output.put_line('Index 3 does not exists');
end if;
va.extend;
dbms_output.put_line('After extend of one index, Count = ' || va.count);
flag := va.exists(5);
if flag = true then
dbms_output.put_line('Index 5 exists with an element ' || va(5));
else
dbms_output.put_line('Index 5 does not exists');
end if;
flag := va.exists(6);
if flag = true then
dbms_output.put_line('Index 6 exists with an element ' || va(6));
else
dbms_output.put_line('Index 6 does not exists');
end if;
va.extend(2);
dbms_output.put_line('After extend of two indexes, Count = ' || va.count);
dbms_output.put_line('VARRAY ELEMENTS');

for i in va.first..va.last loop

dbms_output.put_line('va[' || i || '] = ' || va(i));
end loop;
va(5) := 'e';
va(6) := 'f';
va(7) := 'g';
dbms_output.put_line('AFTER ASSINGNING VALUES TO EXTENDED ELEMENTS,
VARRAY ELEMENTS');

for i in va.first..va.last loop

© Copy rights are reserved.
 171
dbms_output.put_line('va[' || i || '] = ' || va(i));
end loop;
va.extend(3,2);
dbms_output.put_line('After extend of three indexes, Count = ' || va.count);
dbms_output.put_line('VARRAY ELEMENTS');
for i in va.first..va.last loop
dbms_output.put_line('va[' || i || '] = ' || va(i));
end loop;
va.trim;
dbms_output.put_line('After trim of one index, Count = ' || va.count);
va.trim(3);
dbms_output.put_line('After trim of three indexs, Count = ' || va.count);
dbms_output.put_line('AFTER TRIM, VARRAY ELEMENTS');
for i in va.first..va.last loop
dbms_output.put_line('va[' || i || '] = ' || va(i));
end loop;
va.delete;
dbms_output.put_line('After delete of entire varray, Count = ' || va.count);
END;

Output:
Limit = 10
Count = 4
First Index = 1
Last Index = 4
Next Index = 3
Previous Index = 2
VARRAY ELEMENTS
va[1] = a
va[2] = b
va[3] = c
va[4] = d
Index 3 exists with an element c
After extend of one index, Count = 5
Index 5 exists with an element
Index 6 does not exists
After extend of two indexes, Count = 7
VARRAY ELEMENTS
© Copy rights are reserved.
 172
va[1] = a
va[2] = b
va[3] = c
va[4] = d
va[5] =
va[6] =
va[7] =
AFTER ASSINGNING VALUES TO EXTENDED ELEMENTS, VARRAY ELEMENTS
va[1] = a
va[2] = b
va[3] = c
va[4] = d
va[5] = e
va[6] = f
va[7] = g
After extend of three indexes, Count = 10
VARRAY ELEMENTS
va[1] = a
va[2] = b
va[3] = c
va[4] = d
va[5] = e
va[6] = f
va[7] = g
va[8] = b
va[9] = b
va[10] = b
After trim of one index, Count = 9
After trim of three indexs, Count = 6
AFTER TRIM, VARRAY ELEMENTS
va[1] = a
va[2] = b
va[3] = c
va[4] = d
va[5] = e
va[6] = f
After delete of entire varray, Count = 0

© Copy rights are reserved.

 173

Ex2: DECLARE

type t is varray(4) of student%rowtype;

va t := t(null,null,null,null);
BEGIN

for i in 1..va.count loop

select * into va(i) from student where sno = i;
dbms_output.put_line('Sno = ' || va(i).sno || ' Sname = ' || va(i).sname);
end loop;
END;

Output:
Sno = 1 Sname = saketh
Sno = 2 Sname = srinu
Sno = 3 Sname = divya
Ex3: DECLARE

type t is varray(4) of student.smarks%type;

va t := t(null,null,null,null);
BEGIN

for i in 1..va.count loop

select smarks into va(i) from student where sno = i;
dbms_output.put_line('Smarks = ' || va(i));
end loop;
END;

Output:
Smarks = 100
Smarks = 200
Smarks = 300
Ex4: DECLARE

type r is record(c1 student.sname%type,c2 student.smarks%type);

type t is varray(4) of r;
va t := t(null,null,null,null);
BEGIN

for i in 1..va.count loop

select sname,smarks into va(i) from student where sno = i;
dbms_output.put_line('Sname = ' || va(i).c1 || ' Smarks = ' || va(i).c2);
end loop;
END;

Output:
© Copy rights are reserved.
 174
Sname = saketh Smarks = 100
Sname = srinu Smarks = 200
Ex5: DECLARE

type t is varray(1) of addr;

va t := t(null);
cursor c is select * from employ;
i number := 1;
BEGIN

for v in c loop
select address into va(i) from employ where ename = v.ename;
dbms_output.put_line('Hno = ' || va(i).hno || ' City = ' || va(i).city);
end loop;
END;

Output:
Hno = 11 City = hyd
Hno = 22 City = bang
Hno = 33 City = kochi

Ex6: DECLARE

type t is varray(5) of varchar(2);

va1 t;
va2 t := t();
BEGIN

if va1 is null then

dbms_output.put_line('va1 is null');
else
dbms_output.put_line('va1 is not null');
end if;
if va2 is null then
dbms_output.put_line('va2 is null');
else
dbms_output.put_line('va2 is not null');
end if;
END;

Output:
va1 is null
va2 is not null

© Copy rights are reserved.

 175

NESTED TABLES
A nested table is thought of a database table which has no limit on its size. Elements are inserted
into nested table starting at index 1. The maximum size of the varray is 2 giga bytes.
Syntax: Type <type_name> is table of <table_type>;

Ex1: DECLARE

type t is table of varchar(2);

nt t := t('a','b','c','d');
flag boolean;
BEGIN

if nt.limit is null then

dbms_output.put_line('No limit to Nested Tables');
else
dbms_output.put_line('Limit = ' || nt.limit);
end if;
dbms_output.put_line('Count = ' || nt.count);
dbms_output.put_line('First Index = ' || nt.first);
dbms_output.put_line('Last Index = ' || nt.last);
dbms_output.put_line('Next Index = ' || nt.next(2));
dbms_output.put_line('Previous Index = ' || nt.prior(3));
dbms_output.put_line('NESTED TABLE ELEMENTS');
for i in 1..nt.count loop
dbms_output.put_line('nt[' || i || '] = ' || nt(i));
end loop;
flag := nt.exists(3);
if flag = true then
dbms_output.put_line('Index 3 exists with an element ' || nt(3));
else
dbms_output.put_line('Index 3 does not exists');
end if;
nt.extend;
dbms_output.put_line('After extend of one index, Count = ' || nt.count);
flag := nt.exists(5);
if flag = true then
dbms_output.put_line('Index 5 exists with an element ' || nt(5));
else
© Copy rights are reserved.
 176
dbms_output.put_line('Index 5 does not exists');
end if;
flag := nt.exists(6);
if flag = true then
dbms_output.put_line('Index 6 exists with an element ' || nt(6));
else
dbms_output.put_line('Index 6 does not exists');
end if;
nt.extend(2);
dbms_output.put_line('After extend of two indexes, Count = ' || nt.count);
dbms_output.put_line('NESTED TABLE ELEMENTS');
for i in 1..nt.count loop
dbms_output.put_line('nt[' || i || '] = ' || nt(i));
end loop;
nt(5) := 'e';
nt(6) := 'f';
nt(7) := 'g';
dbms_output.put_line('AFTER ASSINGNING VALUES TO EXTENDED ELEMENTS, NESTED
TABLE ELEMENTS');

for i in 1..nt.count loop

dbms_output.put_line('nt[' || i || '] = ' || nt(i));
end loop;
nt.extend(5,2);
dbms_output.put_line('After extend of five indexes, Count = ' || nt.count);
dbms_output.put_line('NESTED TABLE ELEMENTS');
for i in 1..nt.count loop
dbms_output.put_line('nt[' || i || '] = ' || nt(i));
end loop;
nt.trim;
dbms_output.put_line('After trim of one index, Count = ' || nt.count);
nt.trim(3);
dbms_output.put_line('After trim of three indexs, Count = ' || nt.count);
dbms_output.put_line('AFTER TRIM, NESTED TABLE ELEMENTS');
for i in 1..nt.count loop
dbms_output.put_line('nt[' || i || '] = ' || nt(i));
end loop;
nt.delete(1);
dbms_output.put_line('After delete of first index, Count = ' || nt.count);
© Copy rights are reserved.
 177
dbms_output.put_line('NESTED TABLE ELEMENTS');
for i in 2..nt.count+1 loop
dbms_output.put_line('nt[' || i || '] = ' || nt(i));
end loop;
nt.delete(4);
dbms_output.put_line('After delete of fourth index, Count = ' || nt.count);
dbms_output.put_line('NESTED TABLE ELEMENTS');
for i in 2..3 loop
dbms_output.put_line('nt[' || i || '] = ' || nt(i));
end loop;
for i in 5..nt.count+2 loop
dbms_output.put_line('nt[' || i || '] = ' || nt(i));
end loop;
nt.delete;
dbms_output.put_line('After delete of entire nested table, Count = ' ||
nt.count);
END;

Output:
No limit to Nested Tables
Count = 4
First Index = 1
Last Index = 4
Next Index = 3
Previous Index = 2
NESTED TABLE ELEMENTS
nt[1] = a
nt[2] = b
nt[3] = c
nt[4] = d
Index 3 exists with an element c
After extend of one index, Count = 5
Index 5 exists with an element
Index 6 does not exists
After extend of two indexes, Count = 7
NESTED TABLE ELEMENTS
nt[1] = a
nt[2] = b
© Copy rights are reserved.
 178
nt[3] = c
nt[4] = d
nt[5] =
nt[6] =
nt[7] =
AFTER ASSINGNING VALUES TO EXTENDED ELEMENTS, NESTED TABLE ELEMENTS
nt[1] = a
nt[2] = b
nt[3] = c
nt[4] = d
nt[5] = e
nt[6] = f
nt[7] = g
After extend of five indexes, Count = 12
NESTED TABLE ELEMENTS
nt[1] = a
nt[2] = b
nt[3] = c
nt[4] = d
nt[5] = e
nt[6] = f
nt[7] = g
nt[8] = b
nt[9] = b
nt[10] = b
nt[11] = b
nt[12] = b
After trim of one index, Count = 11
After trim of three indexs, Count = 8
AFTER TRIM, NESTED TABLE ELEMENTS
nt[1] = a
nt[2] = b
nt[3] = c
nt[4] = d
nt[5] = e
nt[6] = f
nt[7] = g
nt[8] = b
© Copy rights are reserved.
 179
After delete of first index, Count = 7
NESTED TABLE ELEMENTS
nt[2] = b
nt[3] = c
nt[4] = d
nt[5] = e
nt[6] = f
nt[7] = g
nt[8] = b
After delete of fourth index, Count = 6
NESTED TABLE ELEMENTS
nt[2] = b
nt[3] = c
nt[5] = e
nt[6] = f
nt[7] = g
nt[8] = b
After delete of entire nested table, Count = 0

Ex2: DECLARE

type t is table of student%rowtype;

nt t := t(null,null,null,null);
BEGIN

for i in 1..nt.count loop

select * into nt(i) from student where sno = i;
dbms_output.put_line('Sno = ' || nt(i).sno || ' Sname = ' || nt(i).sname);
end loop;
END;

Output:
Sno = 1 Sname = saketh
Sno = 2 Sname = srinu
Ex3: DECLARE

type t is table of student.smarks%type;

nt t := t(null,null,null,null);
BEGIN

for i in 1..nt.count loop

select smarks into nt(i) from student where sno = i;
dbms_output.put_line('Smarks = ' || nt(i));

© Copy rights are reserved.

 180
end loop;
END;

Output: Smarks = 100

Smarks = 200
Ex4: DECLARE

type r is record(c1 student.sname%type,c2 student.smarks%type);

type t is table of r;
nt t := t(null,null,null,null);
BEGIN

for i in 1..nt.count loop

select sname,smarks into nt(i) from student where sno = i;
dbms_output.put_line('Sname = ' || nt(i).c1 || ' Smarks = ' || nt(i).c2);
end loop;
END;

Output: Sname = saketh Smarks = 100

Sname = srinu Smarks = 200
Ex5: DECLARE

type t is table of addr;

nt t := t(null);
cursor c is select * from employ;
i number := 1;
BEGIN

for v in c loop
select address into nt(i) from employ where ename = v.ename;
dbms_output.put_line('Hno = ' || nt(i).hno || ' City = ' || nt(i).city);
end loop;
END;

Output: Hno = 11 City = hyd

Ex6: DECLARE

type t is varray(5) of varchar(2);

nt1 t;
nt2 t := t();
BEGIN

if nt1 is null then

dbms_output.put_line('nt1 is null');
else
dbms_output.put_line('nt1 is not null');
end if;
if nt2 is null then
© Copy rights are reserved.
 181
dbms_output.put_line('nt2 is null');
else
dbms_output.put_line('nt2 is not null');
end if; END;
Output:
nt1 is null
nt2 is not null

SET OPERATIONS IN NESTED TABLES

You can perform set operations in the nested tables. You can also perform equality comparisions
between nested tables.
Possible operations are
 UNION
 UNION DISTINCT
 INTERSECT

 EXCEPT ( act like MINUS)

Ex:
DECLARE

type t is table of varchar(2);

nt1 t := t('a','b','c');
nt2 t := t('c','b','a');
nt3 t := t('b','c','a','c');
nt4 t := t('a','b','d');
nt5 t;
BEGIN

nt5 := set(nt1);
dbms_output.put_line('NESTED TABLE ELEMENTS');
for i in nt5.first..nt5.last loop
dbms_output.put_line('nt5[ ' || i || ' ] = ' || nt5(i));
end loop;
nt5 := set(nt3);
dbms_output.put_line('NESTED TABLE ELEMENTS');
for i in nt5.first..nt5.last loop
dbms_output.put_line('nt5[ ' || i || ' ] = ' || nt5(i));
end loop;
nt5 := nt1 multiset union nt4;
dbms_output.put_line('NESTED TABLE ELEMENTS');
for i in nt5.first..nt5.last loop
dbms_output.put_line('nt5[ ' || i || ' ] = ' || nt5(i));

© Copy rights are reserved.

 182
end loop;
nt5 := nt1 multiset union nt3;
dbms_output.put_line('NESTED TABLE ELEMENTS');
for i in nt5.first..nt5.last loop
dbms_output.put_line('nt5[ ' || i || ' ] = ' || nt5(i));
end loop;
nt5 := nt1 multiset union distinct nt3;
dbms_output.put_line('NESTED TABLE ELEMENTS');
for i in nt5.first..nt5.last loop
dbms_output.put_line('nt5[ ' || i || ' ] = ' || nt5(i));
end loop;
nt5 := nt1 multiset except nt4;
dbms_output.put_line('NESTED TABLE ELEMENTS');
for i in nt5.first..nt5.last loop
dbms_output.put_line('nt5[ ' || i || ' ] = ' || nt5(i));
end loop;
nt5 := nt4 multiset except nt1;
dbms_output.put_line('NESTED TABLE ELEMENTS');
for i in nt5.first..nt5.last loop
dbms_output.put_line('nt5[ ' || i || ' ] = ' || nt5(i));
end loop;
END;

Output:

NESTED TABLE ELEMENTS

nt5[ 1 ] = a
nt5[ 2 ] = b
nt5[ 3 ] = c
NESTED TABLE ELEMENTS
nt5[ 1 ] = b
nt5[ 2 ] = c
nt5[ 3 ] = a
NESTED TABLE ELEMENTS
nt5[ 1 ] = a
nt5[ 2 ] = b
nt5[ 3 ] = c
nt5[ 4 ] = a
© Copy rights are reserved.
 183
nt5[ 5 ] = b
nt5[ 6 ] = d
NESTED TABLE ELEMENTS
nt5[ 1 ] = a
nt5[ 2 ] = b
nt5[ 3 ] = c
nt5[ 4 ] = b
nt5[ 5 ] = c
nt5[ 6 ] = a
nt5[ 7 ] = c
NESTED TABLE ELEMENTS
nt5[ 1 ] = a
nt5[ 2 ] = b
nt5[ 3 ] = c
NESTED TABLE ELEMENTS
nt5[ 1 ] = c
NESTED TABLE ELEMENTS
nt5[ 1 ] = d

INDEX-BY TABLES
An index-by table has no limit on its size. Elements are inserted into index-by table whose index
may start non-sequentially including negative integers.
Syntax: Type <type_name> is table of <table_type> index by binary_integer;

Ex:
DECLARE

type t is table of varchar(2) index by binary_integer;

ibt t;
flag boolean;
BEGIN

ibt(1) := 'a';
ibt(-20) := 'b';
ibt(30) := 'c';
ibt(100) := 'd';
if ibt.limit is null then
dbms_output.put_line('No limit to Index by Tables');
else
dbms_output.put_line('Limit = ' || ibt.limit);

© Copy rights are reserved.

 184
end if;
dbms_output.put_line('Count = ' || ibt.count);
dbms_output.put_line('First Index = ' || ibt.first);
dbms_output.put_line('Last Index = ' || ibt.last);
dbms_output.put_line('Next Index = ' || ibt.next(2));
dbms_output.put_line('Previous Index = ' || ibt.prior(3));
dbms_output.put_line('INDEX BY TABLE ELEMENTS');
dbms_output.put_line('ibt[-20] = ' || ibt(-20));
dbms_output.put_line('ibt[1] = ' || ibt(1));
dbms_output.put_line('ibt[30] = ' || ibt(30));
dbms_output.put_line('ibt[100] = ' || ibt(100));
flag := ibt.exists(30);
if flag = true then
dbms_output.put_line('Index 30 exists with an element ' || ibt(30));
else
dbms_output.put_line('Index 30 does not exists');
end if;
flag := ibt.exists(50);
if flag = true then
dbms_output.put_line('Index 50 exists with an element ' || ibt(30));
else
dbms_output.put_line('Index 50 does not exists');
end if;
ibt.delete(1);
dbms_output.put_line('After delete of first index, Count = ' || ibt.count);
ibt.delete(30);
dbms_output.put_line('After delete of index thirty, Count = ' || ibt.count);
dbms_output.put_line('INDEX BY TABLE ELEMENTS');
dbms_output.put_line('ibt[-20] = ' || ibt(-20));
dbms_output.put_line('ibt[100] = ' || ibt(100));
ibt.delete;
dbms_output.put_line('After delete of entire index-by table, Count = ' ||
ibt.count);
END;

Output:
No limit to Index by Tables
Count = 4
First Index = -20
© Copy rights are reserved.
 185
Last Index = 100
Next Index = 30
Previous Index = 1
INDEX BY TABLE ELEMENTS
ibt[-20] = b
ibt[1] = a
ibt[30] = c
ibt[100] = d
Index 30 exists with an element c
Index 50 does not exists
After delete of first index, Count = 3
After delete of index thirty, Count = 2
INDEX BY TABLE ELEMENTS
ibt[-20] = b
ibt[100] = d
After delete of entire index-by table, Count = 0
DIFFERENCES AMONG COLLECTIONS
 Varrays has limit, nested tables and index-by tables has no limit.
 Varrays and nested tables must be initialized before assignment of elements, in index-by
tables we can directly assign elements.
 Varrays and nested tables stored in database, but index-by tables can not.
 Nested tables and index-by tables are PL/SQL tables, but varrays can not.
 Keys must be positive in case of nested tables and varrays, in case of index-by tables keys
can be positive or negative.
 Referencing nonexistent elements raises SUBSCRIPT_BEYOND_COUNT in both nested tables and
varrays, but in case of index-by tables NO_DATA_FOUND raises.
 Keys are sequential in both nested tables and varrays, non-sequential in index-by tables.
 Individual indexes can be deleted in both nested tables and index-by tables, but in varrays
can not.
 Individual indexes can be trimmed in both nested tables and varrays, but in index-by
tables can not.
 Individual indexes can be extended in both nested tables and varrays, but in index-by
tables can not.
MULTILEVEL COLLECTIONS
Collections of more than one dimension which is a collection of collections, known as multilevel
collections.
Syntax:
Type <type_name1> is table of <table_type> index by binary_integer;
© Copy rights are reserved.
 186
Type <type_name2> is varray(<limit>) | table | of <type_name1> | index by
binary_integer;

Ex1:
DECLARE

type t1 is table of varchar(2) index by binary_integer;

type t2 is varray(5) of t1;
va t2 := t2();
c number := 97;
flag boolean;
BEGIN

va.extend(4);
dbms_output.put_line('Count = ' || va.count);
dbms_output.put_line('Limit = ' || va.limit);
for i in 1..va.count loop
for j in 1..va.count loop
va(i)(j) := chr(c);
c := c + 1;
end loop;
end loop;
dbms_output.put_line('VARRAY ELEMENTS');
for i in 1..va.count loop
for j in 1..va.count loop
dbms_output.put_line('va[' || i || '][' || j || '] = ' || va(i)(j));
end loop;
end loop;
dbms_output.put_line('First index = ' || va.first);
dbms_output.put_line('Last index = ' || va.last);
dbms_output.put_line('Next index = ' || va.next(2));
dbms_output.put_line('Previous index = ' || va.prior(3));
flag := va.exists(2);
if flag = true then
dbms_output.put_line('Index 2 exists');
else
dbms_output.put_line('Index 2 exists');
end if;
va.extend;

© Copy rights are reserved.

 187
va(1)(5) := 'q';
va(2)(5) := 'r';
va(3)(5) := 's';
va(4)(5) := 't';
va(5)(1) := 'u';
va(5)(2) := 'v';
va(5)(3) := 'w';
va(5)(4) := 'x';
va(5)(5) := 'y';
dbms_output.put_line('After extend of one index, Count = ' || va.count);
dbms_output.put_line('VARRAY ELEMENTS');
for i in 1..va.count loop
for j in 1..va.count loop
dbms_output.put_line('va[' || i || '][' || j || '] = ' || va(i)(j));
end loop;
end loop;
va.trim;
dbms_output.put_line('After trim of one index, Count = ' || va.count);
va.trim(2);
dbms_output.put_line('After trim of two indexes, Count = ' || va.count);
dbms_output.put_line('VARRAY ELEMENTS');
for i in 1..va.count loop
for j in 1..va.count loop
dbms_output.put_line('va[' || i || '][' || j || '] = ' || va(i)(j));
end loop;
end loop;
va.delete;
dbms_output.put_line('After delete of entire varray, Count = ' || va.count);
END;

Output:

Count = 4
Limit = 5
VARRAY ELEMENTS
va[1][1] = a
va[1][2] = b
va[1][3] = c
© Copy rights are reserved.
 188
va[1][4] = d
va[2][1] = e
va[2][2] = f
va[2][3] = g
va[2][4] = h
va[3][1] = i
va[3][2] = j
va[3][3] = k
va[3][4] = l
va[4][1] = m
va[4][2] = n
va[4][3] = o
va[4][4] = p
First index = 1
Last index = 4
Next index = 3
Previous index = 2
Index 2 exists
After extend of one index, Count = 5
VARRAY ELEMENTS
va[1][1] = a
va[1][2] = b
va[1][3] = c
va[1][4] = d
va[1][5] = q
va[2][1] = e
va[2][2] = f
va[2][3] = g
va[2][4] = h
va[2][5] = r
va[3][1] = i
va[3][2] = j
va[3][3] = k
va[3][4] = l
va[3][5] = s
va[4][1] = m
va[4][2] = n
va[4][3] = o
© Copy rights are reserved.
 189
va[4][4] = p
va[4][5] = t
va[5][1] = u
va[5][2] = v
va[5][3] = w
va[5][4] = x
va[5][5] = y
After trim of one index, Count = 4
After trim of two indexes, Count = 2
VARRAY ELEMENTS
va[1][1] = a
va[1][2] = b
va[2][1] = e
va[2][2] = f
After delete of entire varray, Count = 0

Ex2:
DECLARE

type t1 is table of varchar(2) index by binary_integer;

type t2 is table of t1;
nt t2 := t2();
c number := 65;
v number := 1;
flag boolean;
BEGIN

nt.extend(4);
dbms_output.put_line('Count = ' || nt.count);
if nt.limit is null then
dbms_output.put_line('No limit to Nested Tables');
else
dbms_output.put_line('Limit = ' || nt.limit);
end if;
for i in 1..nt.count loop
for j in 1..nt.count loop
nt(i)(j) := chr(c);
c := c + 1;
if c = 91 then
c := 97;

© Copy rights are reserved.

 190
end if;
end loop;
end loop;
dbms_output.put_line('NESTED TABLE ELEMENTS');
for i in 1..nt.count loop
for j in 1..nt.count loop
dbms_output.put_line('nt[' || i || '][' || j || '] = ' || nt(i)(j));
end loop;
end loop;
dbms_output.put_line('First index = ' || nt.first);
dbms_output.put_line('Last index = ' || nt.last);
dbms_output.put_line('Next index = ' || nt.next(2));
dbms_output.put_line('Previous index = ' || nt.prior(3));
flag := nt.exists(2);
if flag = true then
dbms_output.put_line('Index 2 exists');
else
dbms_output.put_line('Index 2 exists');
end if;
nt.extend(2);
nt(1)(5) := 'Q';
nt(1)(6) := 'R';
nt(2)(5) := 'S';
nt(2)(6) := 'T';
nt(3)(5) := 'U';
nt(3)(6) := 'V';
nt(4)(5) := 'W';
nt(4)(6) := 'X';
nt(5)(1) := 'Y';
nt(5)(2) := 'Z';
nt(5)(3) := 'a';
nt(5)(4) := 'b';
nt(5)(5) := 'c';
nt(5)(6) := 'd';
nt(6)(1) := 'e';
nt(6)(2) := 'f';
nt(6)(3) := 'g';
nt(6)(4) := 'h';
© Copy rights are reserved.
 191
nt(6)(5) := 'i';
nt(6)(6) := 'j';
dbms_output.put_line('After extend of one index, Count = ' || nt.count);
dbms_output.put_line('NESTED TABLE ELEMENTS');
for i in 1..nt.count loop
for j in 1..nt.count loop
dbms_output.put_line('nt[' || i || '][' || j || '] = ' || nt(i)(j));
end loop;
end loop;
nt.trim;
dbms_output.put_line('After trim of one indexe, Count = ' || nt.count);
nt.trim(2);
dbms_output.put_line('After trim of two indexes, Count = ' || nt.count);
dbms_output.put_line('NESTED TABLE ELEMENTS');
for i in 1..nt.count loop
for j in 1..nt.count loop
dbms_output.put_line('nt[' || i || '][' || j || '] = ' || nt(i)(j));
end loop;
end loop;
nt.delete(2);
dbms_output.put_line('After delete of second index, Count = ' || nt.count);
dbms_output.put_line('NESTED TABLE ELEMENTS');
loop
exit when v = 4;
for j in 1..nt.count+1 loop
dbms_output.put_line('nt[' || v || '][' || j || '] = ' || nt(v)(j));
end loop;
v := v + 1;
if v= 2 then
v := 3;
end if;
end loop;
nt.delete;
dbms_output.put_line('After delete of entire nested table, Count = ' ||
nt.count);
END;

Output:
© Copy rights are reserved.
 192
Count = 4
No limit to Nested Tables
NESTED TABLE ELEMENTS
nt[1][1] = A
nt[1][2] = B
nt[1][3] = C
nt[1][4] = D
nt[2][1] = E
nt[2][2] = F
nt[2][3] = G
nt[2][4] = H
nt[3][1] = I
nt[3][2] = J
nt[3][3] = K
nt[3][4] = L
nt[4][1] = M
nt[4][2] = N
nt[4][3] = O
nt[4][4] = P
First index = 1
Last index = 4
Next index = 3
Previous index = 2
Index 2 exists
After extend of one index, Count = 6
NESTED TABLE ELEMENTS
nt[1][1] = A
nt[1][2] = B
nt[1][3] = C
nt[1][4] = D
nt[1][5] = Q
nt[1][6] = R
nt[2][1] = E
nt[2][2] = F
nt[2][3] = G
nt[2][4] = H
nt[2][5] = S
nt[2][6] = T
© Copy rights are reserved.
 193
nt[3][1] = I
nt[3][2] = J
nt[3][3] = K
nt[3][4] = L
nt[3][5] = U
nt[3][6] = V
nt[4][1] = M
nt[4][2] = N
nt[4][3] = O
nt[4][4] = P
nt[4][5] = W
nt[4][6] = X
nt[5][1] = Y
nt[5][2] = Z
nt[5][3] = a
nt[5][4] = b
nt[5][5] = c
nt[5][6] = d
nt[6][1] = e
nt[6][2] = f
nt[6][3] = g
nt[6][4] = h
nt[6][5] = i
nt[6][6] = j
After trim of one indexe, Count = 5
After trim of two indexes, Count = 3
NESTED TABLE ELEMENTS
nt[1][1] = A
nt[1][2] = B
nt[1][3] = C
nt[2][1] = E
nt[2][2] = F
nt[2][3] = G
nt[3][1] = I
nt[3][2] = J
nt[3][3] = K
After delete of second index, Count = 2
NESTED TABLE ELEMENTS
© Copy rights are reserved.
 194
nt[1][1] = A
nt[1][2] = B
nt[1][3] = C
nt[3][1] = I
nt[3][2] = J
nt[3][3] = K
After delete of entire nested table, Count = 0

Ex3:
DECLARE

type t1 is table of varchar(2) index by binary_integer;

type t2 is table of t1 index by binary_integer;
ibt t2;
flag boolean;
BEGIN

dbms_output.put_line('Count = ' || ibt.count);

if ibt.limit is null then
dbms_output.put_line('No limit to Index-by Tables');
else
dbms_output.put_line('Limit = ' || ibt.limit);
end if;
ibt(1)(1) := 'a';
ibt(4)(5) := 'b';
ibt(5)(1) := 'c';
ibt(6)(2) := 'd';
ibt(8)(3) := 'e';
ibt(3)(4) := 'f';
dbms_output.put_line('INDEX-BY TABLE ELEMENTS');
dbms_output.put_line('ibt([1][1] = ' || ibt(1)(1));
dbms_output.put_line('ibt([4][5] = ' || ibt(4)(5));
dbms_output.put_line('ibt([5][1] = ' || ibt(5)(1));
dbms_output.put_line('ibt([6][2] = ' || ibt(6)(2));
dbms_output.put_line('ibt([8][3] = ' || ibt(8)(3));
dbms_output.put_line('ibt([3][4] = ' || ibt(3)(4));
dbms_output.put_line('First Index = ' || ibt.first);
dbms_output.put_line('Last Index = ' || ibt.last);
dbms_output.put_line('Next Index = ' || ibt.next(3));
dbms_output.put_line('Prior Index = ' || ibt.prior(8));

© Copy rights are reserved.

 195
ibt(1)(2) := 'g';
ibt(1)(3) := 'h';
ibt(1)(4) := 'i';
ibt(1)(5) := 'k';
ibt(1)(6) := 'l';
ibt(1)(7) := 'm';
ibt(1)(8) := 'n';
dbms_output.put_line('Count = ' || ibt.count);
dbms_output.put_line('INDEX-BY TABLE ELEMENTS');
for i in 1..8 loop
dbms_output.put_line('ibt[1][' || i || '] = ' || ibt(1)(i));
end loop;
dbms_output.put_line('ibt([4][5] = ' || ibt(4)(5));
dbms_output.put_line('ibt([5][1] = ' || ibt(5)(1));
dbms_output.put_line('ibt([6][2] = ' || ibt(6)(2));
dbms_output.put_line('ibt([8][3] = ' || ibt(8)(3));
dbms_output.put_line('ibt([3][4] = ' || ibt(3)(4));
flag := ibt.exists(3);
if flag = true then
dbms_output.put_line('Index 3 exists');
else
dbms_output.put_line('Index 3 exists');
end if;
ibt.delete(1);
dbms_output.put_line('After delete of first index, Count = ' || ibt.count);
ibt.delete(4);
dbms_output.put_line('After delete of fourth index, Count = ' || ibt.count);
dbms_output.put_line('INDEX-BY TABLE ELEMENTS');
dbms_output.put_line('ibt([5][1] = ' || ibt(5)(1));
dbms_output.put_line('ibt([6][2] = ' || ibt(6)(2));
dbms_output.put_line('ibt([8][3] = ' || ibt(8)(3));
dbms_output.put_line('ibt([3][4] = ' || ibt(3)(4));
ibt.delete;
dbms_output.put_line('After delete of entire index-by table, Count = ' ||
ibt.count);
END;

Output:
Count = 0
© Copy rights are reserved.
 196
No limit to Index-by Tables
INDEX-BY TABLE ELEMENTS
ibt([1][1] = a
ibt([4][5] = b
ibt([5][1] = c
ibt([6][2] = d
ibt([8][3] = e
ibt([3][4] = f
First Index = 1
Last Index = 8
Next Index = 4
Prior Index = 6
Count = 6
INDEX-BY TABLE ELEMENTS
ibt[1][1] = a
ibt[1][2] = g
ibt[1][3] = h
ibt[1][4] = i
ibt[1][5] = k
ibt[1][6] = l
ibt[1][7] = m
ibt[1][8] = n
ibt([4][5] = b
ibt([5][1] = c
ibt([6][2] = d
ibt([8][3] = e
ibt([3][4] = f
Index 3 exists
After delete of first index, Count = 5
After delete of fourth index, Count = 4
INDEX-BY TABLE ELEMENTS
ibt([5][1] = c
ibt([6][2] = d
ibt([8][3] = e
ibt([3][4] = f
After delete of entire index-by table, Count = 0
Ex4:
DECLARE

© Copy rights are reserved.

 197
type t1 is table of varchar(2) index by binary_integer;
type t2 is table of t1 index by binary_integer;
type t3 is table of t2;
nt t3 := t3();
c number := 65;
BEGIN

nt.extend(2);
dbms_output.put_line('Count = ' || nt.count);
for i in 1..nt.count loop
for j in 1..nt.count loop
for k in 1..nt.count loop
nt(i)(j)(k) := chr(c);
c := c + 1;
end loop;
end loop;
end loop;
dbms_output.put_line('NESTED TABLE ELEMENTS');
for i in 1..nt.count loop
for j in 1..nt.count loop
for k in 1..nt.count loop
dbms_output.put_line('nt[' || i || '][' || j || '][' || k || '] = ' ||
nt(i)(j)(k));
end loop;
end loop;
end loop;
END;

Output:
Count = 2
NESTED TABLE ELEMENTS
nt[1][1][1] = A
nt[1][1][2] = B
nt[1][2][1] = C
nt[1][2][2] = D
nt[2][1][1] = E
nt[2][1][2] = F
nt[2][2][1] = G
nt[2][2][2] = H

© Copy rights are reserved.

 198

OBJECTS USED IN THE EXAMPLES

SQL> select * from student;

SNO SNAME SMARKS
---------- -------------- ----------
1 saketh 100
2 srinu 200
3 divya 300
4 manogni 400
SQL> create or replace type addr as object(hno number(2),city varchar(10));/
SQL> select * from employ;
ENAME JOB ADDRESS(HNO, CITY)
---------- ---------- -----------------------------
Ranjit clerk ADDR(11, 'hyd')
Satish manager ADDR(22, 'bang')
Srinu engineer ADDR(33, 'kochi')

ERROR HANDLING

PL/SQL implements error handling with exceptions and exception handlers. Exceptions can be
associated with oracle errors or with your own user-defined errors. By using exceptions and
exception handlers, you can make your PL/SQL programs robust and able to deal with both
unexpected and expected errors during execution.
ERROR TYPES
 Compile-time errors
 Runtime errors
Errors that occur during the compilation phase are detected by the PL/SQL engine and reported
back to the user, we have to correct them.
Runtime errors are detected by the PL/SQL runtime engine which can programmatically raise
and caught by exception handlers.
Exceptions are designed for run-time error handling, rather than compile-time error handling.

© Copy rights are reserved.

 199
HANDLING EXCEPTIONS
When exception is raised, control passes to the exception section of the block. The exception
section consists of handlers for some or all of the exceptions. An exception handler contains the
code that is executed when the error associated with the exception occurs, and the exception is
raised.
Syntax:
EXCEPTION

When exception_name then

Sequence_of_statements;
When exception_name then
Sequence_of_statements;
When others then
Sequence_of_statements;
END;

EXCEPTION TYPES

 Predefined exceptions
 User-defined exceptions
PREDEFINED EXCEPTIONS
Oracle has predefined several exceptions that corresponds to the most common oracle errors.
Like the predefined types, the identifiers of these exceptions are defined in the STANDARD

package. Because of this, they are already available to the program, it is not necessary to declare
them in the declarative secion.
Ex1:
DECLARE

a number;
b varchar(2);
v_marks number;
cursor c is select * from student;
type t is varray(3) of varchar(2);
va t := t('a','b');
va1 t;
BEGIN
-- NO_DATA_FOUND
BEGIN

select smarks into v_marks from student where sno = 50;

EXCEPTION

when no_data_found then

dbms_output.put_line('Invalid student number');
© Copy rights are reserved.
 200
END;
-- CURSOR_ALREADY_OPEN
BEGIN

open c;
open c;
EXCEPTION

when cursor_already_open then

dbms_output.put_line('Cursor is already opened');
END;

-- INVALID_CURSOR
BEGIN

close c;
open c;
close c;
close c;
EXCEPTION

when invalid_cursor then

dbms_output.put_line('Cursor is already closed');
END;
-- TOO_MANY_ROWS
BEGIN

select smarks into v_marks from student where sno > 1;

EXCEPTION

when too_many_rows then

dbms_output.put_line('Too many values are coming to marks
variable');
END;
-- ZERO_DIVIDE
BEGIN

a := 5/0;
EXCEPTION

when zero_divide then

dbms_output.put_line('Divided by zero - invalid operation');
END;
-- VALUE_ERROR
BEGIN

b := 'saketh';
EXCEPTION

when value_error then

dbms_output.put_line('Invalid string length');
END;

© Copy rights are reserved.

 201
-- INVALID_NUMBER
BEGIN

insert into student values('a','srinu',100);

EXCEPTION

when invalid_number then

dbms_output.put_line('Invalid number');
END;

-- SUBSCRIPT_OUTSIDE_LIMIT
BEGIN

va(4) := 'c';
EXCEPTION

when subscript_outside_limit then

dbms_output.put_line('Index is greater than the limit');
END;
-- SUBSCRIPT_BEYOND_COUNT
BEGIN

va(3) := 'c';
EXCEPTION

when subscript_beyond_count then

dbms_output.put_line('Index is greater than the count');
END;
-- COLLECTION_IS_NULL
BEGIN

va1(1) := 'a';
EXCEPTION

when collection_is_null then

dbms_output.put_line('Collection is empty');
END;

--
END;

Output:
Invalid student number
Cursor is already opened
Cursor is already closed
Too many values are coming to marks variable
Divided by zero - invalid operation
Invalid string length
Invalid number
Index is greater than the limit

© Copy rights are reserved.

 202
Index is greater than the count
Collection is empty

Ex2:
DECLARE

c number;
BEGIN

c := 5/0;
EXCEPTION

when zero_divide then

dbms_output.put_line('Invalid Operation');
when others then
dbms_output.put_line('From OTHERS handler: Invalid
Operation');
END;

Output: Invalid Operation

USER-DEFINED EXCEPTIONS
A user-defined exception is an error that is defined by the programmer. User-defined exceptions
are declared in the declarative secion of a PL/SQL block. Just like variables, exeptions have a
type EXCEPTION and scope.
RAISING EXCEPTIONS

User-defined exceptions are raised explicitly via the RAISE statement.

Ex:
DECLARE

e exception;
BEGIN

raise e;
EXCEPTION

when e then
dbms_output.put_line('e is raised');
END;

Output: e is raised
BULIT-IN ERROR FUNCTIONS
SQLCODE AND SQLERRM

© Copy rights are reserved.

 203
 SQLCODE returns the current error code, and SQLERRM returns the current error message
text;
 For user-defined exception SQLCODE returns 1 and SQLERRM returns “user-deifned
exception”.
 SQLERRM wiil take only negative value except 100. If any positive value other than 100
returns non-oracle exception.
Ex1:
DECLARE

e exception;
v_dname varchar(10);
BEGIN
-- USER-DEFINED EXCEPTION
BEGIN

raise e;
EXCEPTION

when e then
dbms_output.put_line(SQLCODE || ' ' || SQLERRM);

END;

-- PREDEFINED EXCEPTION
BEGIN

select dname into v_dname from dept where deptno = 50;

EXCEPTION

when no_data_found then

dbms_output.put_line(SQLCODE || ' ' || SQLERRM);

END;
END;

Output: 1 User-Defined Exception

100 ORA-01403: no data found
Ex2:
BEGIN

dbms_output.put_line(SQLERRM(100));
dbms_output.put_line(SQLERRM(0));
dbms_output.put_line(SQLERRM(1));
dbms_output.put_line(SQLERRM(-100));
dbms_output.put_line(SQLERRM(-500));
dbms_output.put_line(SQLERRM(200));
dbms_output.put_line(SQLERRM(-900));
END;

© Copy rights are reserved.

 204
Output: ORA-01403: no data found
ORA-0000: normal, successful completion
User-Defined Exception
ORA-00100: no data found
ORA-00500: Message 500 not found; product=RDBMS; facility=ORA
-200: non-ORACLE exception
ORA-00900: invalid SQL statement
DBMS_UTILITY.FORMAT_ERROR_STACK

 The built-in function, like SQLERRM, returns the message associated with the current error.
 It differs from SQLERRM in two ways:
 Its length is not restricted; it will return the full error message string.
 You can not pass an error code number to this function; it cannot be used to return the
message for a random error code.
Ex:
DECLARE

v number := 'ab';
BEGIN

null;
EXCEPTION

when others then

dbms_output.put_line(dbms_utility.format_error_stack);
END;

Output:
declare
*
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
ORA-06512: at line 2

DBMS_UTILITY.FORMAT_CALL_STACK

This function returns a formatted string showing the execution call stack inside your PL/SQL

application. Its usefulness is not restricted to error management; you will also find its handy for
tracing the exectution of your code. You may not use this function in exception block.

Ex:
BEGIN

dbms_output.put_line(dbms_utility.format_call_stack);
END;

© Copy rights are reserved.

 205

Output:
----- PL/SQL Call Stack -----
Object_handle line_number object_name
69760478 2 anonymous block

DBMS_UTILITY.FORMAT_ERROR_BACKTRACE

It displays the execution stack at the point where an exception was raised. Thus , you can call
this function with an exception section at the top level of your stack and still find out where the
error was raised deep within the call stack.
Ex:
CREATE OR REPLACE PROCEDURE P1 IS
BEGIN

dbms_output.put_line('from procedure 1');

raise value_error;
END P1;
CREATE OR REPLACE PROCEDURE P2 IS
BEGIN

dbms_output.put_line('from procedure 2');

p1;
END P2;

CREATE OR REPLACE PROCEDURE P3 IS

BEGIN

dbms_output.put_line('from procedure 3');

p2;
EXCEPTION

when others then

dbms_output.put_line(dbms_utility.format_error_backtrace);
END P3;

Output:
SQL> exec p3

from procedure 3
from procedure 2
from procedure 1
ORA-06512: at "SAKETH.P1", line 4

© Copy rights are reserved.

 206
ORA-06512: at "SAKETH.P2", line 4
ORA-06512: at "SAKETH.P3", line 4

EXCEPTION_INIT PRAGMA
Using this you can associate a named exception with a particular oracle error. This gives you the
ability to trap this error specifically, rather than via an OTHERS handler.
Syntax: PRAGMA EXCEPTION_INIT(exception_name, oracle_error_number);

Ex:
DECLARE

e exception;
pragma exception_init(e,-1476);
c number;
BEGIN

c := 5/0;
EXCEPTION

when e then
dbms_output.put_line('Invalid Operation');
END;

Output:
Invalid Operation

RAISE_APPLICATION_ERROR

You can use this built-in function to create your own error messages, which can be more
descriptive than named exceptions.
Syntax: RAISE_APPLICATION_ERROR(error_number, error_message,, [keep_errors_flag]);
The Boolean parameter keep_errors_flag is optional. If it is TRUE, the new error is added to the
list of errors already raised. If it is FALSE, which is default, the new error will replace the current
list of errors.
Ex:
DECLARE

c number;
BEGIN

c := 5/0;

EXCEPTION

when zero_divide then

© Copy rights are reserved.

 207
raise_application_error(-20222,'Invalid Operation');
END;

Output:
DECLARE

*
ERROR at line 1:
ORA-20222: Invalid Operation
ORA-06512: at line 7
EXCEPTION PROPAGATION
Exceptions can occur in the declarative, the executable, or the exception section of a PL/SQL
block.
EXCEPTION RAISED IN THE EXECUATABLE SECTION

Exceptions raised in execuatable section can be handled in current block or outer block.
Ex1: DECLARE

e exception;
BEGIN
BEGIN

raise e;
END;
EXCEPTION

when e then
dbms_output.put_line('e is raised');
END;

Output: e is raised
Ex2: DECLARE

e exception;
BEGIN
BEGIN

raise e;
END;
END;

Output: ERROR at line 1:

ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at line 5

EXCEPTION RAISED IN THE DECLARATIVE SECTION

Exceptions raised in the declarative secion must be handled in the outer block.

© Copy rights are reserved.

 208

Ex1: DECLARE

c number(3) := 'abcd';
BEGIN

dbms_output.put_line('Hello');
EXCEPTION

when others then

dbms_output.put_line('Invalid string length');
END;

Output: ERROR at line 1:

ORA-06502: PL/SQL: numeric or value error: character to number conversion error
ORA-06512: at line 2
Ex2:
BEGIN
DECLARE

c number(3) := 'abcd';
BEGIN

dbms_output.put_line('Hello');
EXCEPTION

when others then

dbms_output.put_line('Invalid string length');
END;
EXCEPTION

when others then

dbms_output.put_line('From outer block: Invalid string length');
END;

Output:
From outer block: Invalid string length

EXCEPTION RAISED IN THE EXCEPTION SECTION

Exceptions raised in the declarative secion must be handled in the outer block.

Ex1:
DECLARE

e1 exception;
e2 exception;
BEGIN

© Copy rights are reserved.

 209
raise e1;
EXCEPTION

when e1 then
dbms_output.put_line('e1 is raised');
raise e2;
when e2 then
dbms_output.put_line('e2 is raised');
END;

Output:
e1 is raised
DECLARE
*
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at line 9
ORA-06510: PL/SQL: unhandled user-defined exception
Ex2:
DECLARE

e1 exception;
e2 exception;
BEGIN
BEGIN

raise e1;
EXCEPTION

when e1 then
dbms_output.put_line('e1 is raised');
raise e2;
when e2 then
dbms_output.put_line('e2 is raised');
END;
EXCEPTION

when e2 then
dbms_output.put_line('From outer block: e2 is raised');
END;

Output:
e1 is raised

© Copy rights are reserved.

 210
From outer block: e2 is raised
Ex3:
DECLARE

e exception;
BEGIN

raise e;
EXCEPTION

when e then
dbms_output.put_line('e is raised');
raise e;
END;

Output:
e is raised
DECLARE
*
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at line 8
ORA-06510: PL/SQL: unhandled user-defined exception

RESTRICTIONS
You can not pass exception as an argument to a subprogram.

DATABASE TRIGGERS
Triggers are similar to procedures or functions in that they are named PL/SQL blocks with
declarative, executable, and exception handling sections. A trigger is executed implicitly
whenever the triggering event happens. The act of executing a trigger is known as firing the
trigger.

RESTRICTIONS ON TRIGGERES
 Like packages, triggers must be stored as stand-alone objects in the database and cannot
be local to a block or package.
 A trigger does not accept arguments.
USE OF TRIGGERS
 Maintaining complex integrity constraints not possible through declarative constraints
enable at table creation.
 Auditing information in a table by recording the changes made and who made them.

© Copy rights are reserved.

 211
 Automatically signaling other programs that action needs to take place when chages are
made to a table.
 Perform validation on changes being made to tables.
 Automate maintenance of the database.
TYPES OF TRIGGERS
 DML Triggers
 Instead of Triggers
 DDL Triggers
 System Triggers
 Suspend Triggers

CATEGORIES
Timing -- Before or After
Level -- Row or Statement
Row level trigger fires once for each row affected by the triggering statement. Row level trigger
is identified by the FOR EACH ROW clause.
Statement level trigger fires once either before or after the statement.
DML TRIGGER SYNTAX
Create or replace trigger <trigger_name>
{Before | after} {insert or update or delete} on <table_name>
[For each row]
[When (…)]
[Declare]
-- declaration
Begin
-- trigger body
[Exception]
-- exception section
End <trigger_name>;

DML TRIGGERS
A DML trigger is fired on an INSERT, UPDATE, or DELETE operation on a database table. It can be fired
either before or after the statement executes, and can be fired once per affected row, or once
per statement.
The combination of these factors determines the types of the triggers. These are a total of 12
possible types (3 statements * 2 timing * 2 levels).
STATEMENT LEVEL

Statement level trigger fires only once.

© Copy rights are reserved.
 212
Ex: SQL> create table statement_level(count varchar(50));
CREATE OR REPLACE TRIGGER STATEMENT_LEVEL_TRIGGER

after update on student

BEGIN

insert into statement_level values('Statement level fired');

END STATEMENT_LEVEL_TRIGGER;

Output: SQL> update student set smarks=500;

3 rows updated.
SQL> select * from statement_level;
COUNT
----------------------------
Statement level fired
ROW LEVEL

Row level trigger fires once for each row affected by the triggering statement.
Ex:
SQL> create table row_level(count varchar(50));

CREATE OR REPLACE TRIGGER ROW_LEVEL_TRIGGER

after update on student

BEGIN

insert into row_level values('Row level fired');

END ROW_LEVEL_TRIGGER;

Output:
SQL> update student set smarks=500;
3 rows updated.
SQL> select * from statement_level;
COUNT
----------------------------
Row level fired
Row level fired
Row level fired

ORDER OF DML TRIGGER FIRING

 Before statement level

 Before row level
 After row level
 After statement level
Ex:
Suppose we have a follwing table.

© Copy rights are reserved.

 213

SQL> select * from student;

NO NAME MARKS
----- ------- ----------
1 a 100
2 b 200
3 c 300
4 d 400

SQL> create table firing_order(order varchar(50));

CREATE OR REPLACE TRIGGER BEFORE_STATEMENT

before insert on student

BEGIN

insert into firing_order values('Before Statement Level');

END BEFORE_STATEMENT;
=============================================
CREATE OR REPLACE TRIGGER BEFORE_ROW

before insert on student

for each row
BEGIN

insert into firing_order values('Before Row Level');

END BEFORE_ROW;

=====================================
CREATE OR REPLACE TRIGGER AFTER_STATEMENT

after insert on student

BEGIN

insert into firing_order values('After Statement Level');

END AFTER_STATEMENT;

======================================
CREATE OR REPLACE TRIGGER AFTER_ROW

after insert on student

for each row
BEGIN

insert into firing_order values('After Row Level');

END AFTER_ROW;

Output: SQL> select * from firing_order;

no rows selected
SQL> insert into student values(5,'e',500);

© Copy rights are reserved.

 214
1 row created.
SQL> select * from firing_order;
ORDER
Before Statement Level, Before Row Level , After Row Level, After Statement Level
SQL> select * from student;
NO NAME MARKS
---- -------- ----------
1 a 100
2 b 200
3 c 300
4 d 400
5 e 500

CORRELATION IDENTIFIERS IN ROW-LEVEL TRIGGERS

Inside the trigger, you can access the data in the row that is currently being processed. This is
accomplished through two correlation identifiers - :old and :new.
A correlation identifier is a special kind of PL/SQL bind variable. The colon in front of each
indicates that they are bind variables, in the sense of host variables used in embedded PL/SQL,

and indicates that they are not regular PL/SQL variables. The PL/SQL compiler will treat them as
records of type
Triggering_table%ROWTYPE.
Although syntactically they are treated as records, in reality they are not. :old and :new are also
known as pseudorecords, for this reason.
TRIGGERING STATEMENT :OLD :NEW
-------------------------------------- ---------------------------- -----------------------------------------------

INSERT all fields are NULL. values that will be inserted

When the statement is completed.
UPDATE original values for new values that will be updated
the row before the when the statement is completed.
update.
DELETE original values before all fields are NULL.

the row is deleted.

Ex:SQL> create table marks(no number(2) old_marks number(3),new_marks number(3));
CREATE OR REPLACE TRIGGER OLD_NEW

before insert or update or delete on student

for each row
BEGIN

insert into marks values(:old.no,:old.marks,:new.marks);

END OLD_NEW;

© Copy rights are reserved.

 215
Output: SQL> select * from student;
NO NAME MARKS
----- ------- ----------
1 a 100
2 b 200
3 c 300
4 d 400
5 e 500

SQL> select * from marks;

no rows selected
SQL> insert into student values(6,'f',600);
1 row created.
SQL> select * from student;
NO NAME MARKS
---- -------- ----------
1 a 100
2 b 200
3 c 300
4 d 400
5 e 500
6 f 600
SQL> select * from marks;
NO OLD_MARKS NEW_MARKS
---- --------------- ---------------
600
SQL> update student set marks=555 where no=5;
1 row updated.
SQL> select * from student;
NO NAME MARKS
----- ------- ----------
1 a 100
2 b 200
3 c 300
4 d 400
5 e 555
6 f 600
SQL> select * from marks;
© Copy rights are reserved.
 216
NO OLD_MARKS NEW_MARKS
------ ---------------- ---------------
600
5 500 555
SQL> delete student where no = 2;
1 row deleted.
SQL> select * from student;
NO NAME MARKS
---- -------- ----------
1 a 100
3 c 300
4 d 400
5 e 555
REFERENCING CLAUSE

If desired, you can use the REFERENCING clause to specify a different name for :old ane :new. This
clause is found after the triggering event, before the WHEN clause.
Syntax: REFERENCING [old as old_name] [new as new_name]
Ex:
CREATE OR REPLACE TRIGGER REFERENCE_TRIGGER

before insert or update or delete on student

referencing old as old_student new as new_student
for each row
BEGIN

insert into marks

values(:old_student.no,:old_student.marks,:new_student.marks);
END REFERENCE_TRIGGER;

WHEN CLAUSE

WHEN clause is valid for row-level triggers only. If present, the trigger body will be executed only
for those rows that meet the condition specified by the WHEN clause.
Syntax: WHEN trigger_condition;
Where trigger_condition is a Boolean expression. It will be evaluated for each row. The :new and
:old records can be referenced inside trigger_condition as well, but like REFERENCING, the colon is
not used there. The colon is only valid in the trigger body.
Ex:
CREATE OR REPLACE TRIGGER WHEN_TRIGGER

before insert or update or delete on student

referencing old as old_student new as new_student
for each row

© Copy rights are reserved.

 217
when (new_student.marks > 500)
BEGIN

insert into marks

values(:old_student.no,:old_student.marks,:new_student.marks);
END WHEN_TRIGGER;

TRIGGER PREDICATES

There are three Boolean functions that you can use to determine what the operation is.
The predicates are

 INSERTING
 UPDATING
 DELETING

Ex: SQL> create table predicates(operation varchar(20));

CREATE OR REPLACE TRIGGER PREDICATE_TRIGGER

before insert or update or delete on student

BEGIN

if inserting then
insert into predicates values('Insert');
elsif updating then
insert into predicates values('Update');
elsif deleting then
insert into predicates values('Delete');
end if;
END PREDICATE_TRIGGER;

Output: SQL> delete student where no=1;

1 row deleted.
SQL> select * from predicates;
MSG
---------------
Delete
SQL> insert into student values(7,'g',700);
1 row created.
SQL> select * from predicates;
MSG
---------------

© Copy rights are reserved.

 218
Delete
Insert
SQL> update student set marks = 777 where no=7;
1 row updated.
SQL> select * from predicates;
MSG
---------------
Delete
Insert
Update

INSTEAD-OF TRIGGERS

Instead-of triggers fire instead of a DML operation. Also, instead-of triggers can be defined only
on views. Instead-of triggers are used in two cases:
 To allow a view that would otherwise not be modifiable to be modified.
 To modify the columns of a nested table column in a view.
Ex:
SQL> create view emp_dept as select empno,ename,job,dname,loc,sal,e.deptno from
emp e, dept d where e.deptno = d.deptno;

CREATE OR REPLACE TRIGGER INSTEAD_OF_TRIGGER

instead of insert on emp_dept

BEGIN

insert into dept1 values(50,'rd','bang');

insert into
emp1(empno,ename,job,sal,deptno)values(2222,'saketh','doctor',8000,50);
END INSTEAD_OF_TRIGGER;

Output:

SQL> insert into emp_dept values(2222,'saketh','doctor',8000,'rd','bang',50);

SQL> select * from emp_dept;

EMPNO ENAME JOB SAL DNAME LOC DEPTNO

---------- ---------- ------------ ----------- ------------- ------------- ----------

© Copy rights are reserved.

 219
7369 SMITH CLERK 800 RESEARCH DALLAS 20
7499 ALLEN SALESMAN 1600 SALES CHICAGO 30
7521 WARD SALESMAN 1250 SALES CHICAGO 30
7566 JONES MANAGER 2975 RESEARCH DALLAS 20
7654 MARTIN SALESMAN 1250 SALES CHICAGO 30
7698 BLAKE MANAGER 2850 SALES CHICAGO 30
7782 CLARK MANAGER 2450 ACCOUNTING NEW YORK 10
7788 SCOTT ANALYST 3000 RESEARCH DALLAS 20
7839 KING PRESIDENT 5000 ACCOUNTING NEW YORK 10
7844 TURNER SALESMAN 1500 SALES CHICAGO 30
7876 ADAMS CLERK 1100 RESEARCH DALLAS 20
7900 JAMES CLERK 950 SALES CHICAGO 30
7902 FORD ANALYST 3000 RESEARCH DALLAS 20
7934 MILLER CLERK 1300 ACCOUNTING NEW YORK 10
2222 saketh doctor 8000 rd bang 50

SQL> select * from dept;

DEPTNO DNAME LOC

---------- ---------------- -----------
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
50 rd bang

SQL> select * from emp;

EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO

---------- ---------- --------------- -------- -------------- --------- --------- ----------
7369 SMITH CLERK 7902 1 7-DEC-80 800 20
7499 ALLEN SALESMAN 7698 20-FEB-81 1600 300 30
7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30
7566 JONES MANAGER 7839 02-APR-81 2975 20
7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30
7698 BLAKE MANAGER 7839 01-MAY-81 2850 30
7782 CLARK MANAGER 7839 09-JUN-81 2450 10
7788 SCOTT ANALYST 7566 19-APR-87 3000 20
© Copy rights are reserved.
 220
7839 KING PRESIDENT 17-NOV-81 5000 10
7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30
7876 ADAMS CLERK 7788 23-MAY-87 1100 20
7900 JAMES CLERK 7698 03-DEC-81 950 30
7902 FORD ANALYST 7566 03-DEC-81 3000 20
7934 MILLER CLERK 7782 23-JAN-82 1300 10
2222 saketh doctor 8000 50

DDL TRIGGERS
Oracle allows you to define triggers that will fire when Data Definition Language statements are
executed.
Syntax:
Create or replace trigger <trigger_name>
{Before | after} {DDL event} on {database | schema}
[When (…)]
[Declare]
-- declaration
Begin
-- trigger body
[Exception]
-- exception section
End <trigger_name>;

Ex:
SQL> create table my_objects(obj_name varchar(10),obj_type varchar(10),obj_owner
varchar(10),obj_time date);

CREATE OR REPLACE TRIGGER CREATE_TRIGGER

after create on database

BEGIN

insert into my_objects values(sys.dictionary_obj_name,sys.dictionary_obj_type,

© Copy rights are reserved.

 221
sys.dictionary_obj_owner, sysdate);
END CREATE_TRIGGER;

Output:
SQL> select * from my_objects;
no rows selected
SQL> create table stud1(no number(2));
SQL> select * from my_objects;
OBJ_NAME OBJ_TYPE OBJ_OWNER OBJ_TIME
------------- -------------- -------------- ------------
STUD1 TABLE SYS 21-JUL-07
SQL> create sequence ss;
SQL> create view stud_view as select * from stud1;

SQL> select * from my_objects;

OBJ_NAME OBJ_TYPE OBJ_OWNER OBJ_TIME
-------------- ------------- ---------------- -------------
STUD1 TABLE SYS 21-JUL-07
SS SEQUENCE SYS 21-JUL-07
STUD_VIEW VIEW SYS 21-JUL-07

WHEN CLAUSE

If WHEN present, the trigger body will be executed only for those that meet the condition
specified by the WHEN clause.
Ex:
CREATE OR REPLACE TRIGGER CREATE_TRIGGER

after create on database

when (sys.dictionary_obj_type = ‘TABLE’)
BEGIN

insert into my_objects values(sys.dictionary_obj_name,sys.dictionary_obj_type,

sys.dictionary_obj_owner, sysdate);
END CREATE_TRIGGER;

SYSTEM TRIGGERS
System triggers will fire whenever database-wide event occurs. The following are the database
event triggers. To create system trigger you need ADMINISTER DATABASE TRIGGER privilege.
 STARTUP
 SHUTDOWN
© Copy rights are reserved.
 222
 LOGON
 LOGOFF
 SERVERERROR

Syntax:
Create or replace trigger <trigger_name>
{Before | after} {Database event} on {database | schema}
[When (…)]
[Declare]
-- declaration section
Begin
-- trigger body
[Exception]
-- exception section
End <trigger_name>;

Ex:
SQL> create table user_logs(u_name varchar(10),log_time timestamp);
CREATE OR REPLACE TRIGGER AFTER_LOGON

after logon on database

BEGIN

insert into user_logs values(user,current_timestamp);

END AFTER_LOGON;

Output:
SQL> select * from user_logs;

no rows selected

SQL> conn saketh/saketh

SQL> select * from user_logs;

U_NAME LOG_TIME
---------- ------------------------------------------------
SAKETH 22-JUL-07 12.07.13.140000 AM

SQL> conn system/oracle

SQL> select * from user_logs;

© Copy rights are reserved.

 223

U_NAME LOG_TIME
---------- ------------------------------------------------
SAKETH 22-JUL-07 12.07.13.140000 AM
SYSTEM 22-JUL-07 12.07.34.218000 AM

SQL> conn scott/tiger

SQL> select * from user_logs;

U_NAME LOG_TIME
---------- -----------------------------------------------
SAKETH 22-JUL-07 12.07.13.140000 AM
SYSTEM 22-JUL-07 12.07.34.218000 AM
SCOTT 22-JUL-07 12.08.43.093000 AM

SERVERERROR

The SERVERERROR event can be used to track errors that occur in the database. The error code is
available inside the trigger through the SERVER_ERROR attribute function.
Ex:
SQL> create table my_errors(error_msg varchar(200));

CREATE OR REPLACE TRIGGER SERVER_ERROR_TRIGGER

after servererror on database

BEGIN

insert into my_errors values(dbms_utility.format_error_stack);

END SERVER_ERROR_TRIGGER;

Output:
SQL> create table ss (no));
create table ss (no))
*
ERROR at line 1:
ORA-00922: missing or invalid option

SQL> select * from my_errors;

ERROR_MSG
-------------------------------------------------------------
ORA-00922: missing or invalid option
© Copy rights are reserved.
 224

SQL> insert into student values(1,2,3);

insert into student values(1,2,3)
*
ERROR at line 1:
ORA-00942: table or view does not exist

SQL> select * from my_errors;

ERROR_MSG
-------------------------------------------------------------
ORA-00922: missing or invalid option
ORA-00942: table or view does not exist

SERVER_ERROR ATTRIBUTE FUNCTION

It takes a single number type of argument and returns the error at the position on the error
stack indicated by the argument. The position 1 is the top of the stack.
Ex:

CREATE OR REPLACE TRIGGER SERVER_ERROR_TRIGGER

after servererror on database

BEGIN

insert into my_errors values(server_error(1));

END SERVER_ERROR_TRIGGER;

SUSPEND TRIGGERS
This will fire whenever a statement is suspended. This might occur as the result of a space issue
such as exceeding an allocated tablepace quota. This functionality can be used to address the
problem and allow the operatin to continue.
Syntax:
Create or replace trigger <trigger_name>
after suspend on {database | schema}
[When (…)]
[Declare]
-- declaration section
Begin
-- trigger body
© Copy rights are reserved.
 225
[Exception]
-- exception section
End <trigger_name>;
Ex:
SQL> create tablespace my_space datafile 'f:\my_file.dbf' size 2m;
SQL> create table student(sno number(2),sname varchar(10)) tablespace my_space;

CREATE OR REPLACE TRIGGER SUSPEND_TRIGGER

after suspend on database

BEGIN

dbms_output.put_line(‘ No room to insert in your tablespace');

END SUSPEND_TRIGGER;

Output:
Insert more rows in student table then , you will get
No room to insert in your tablespace

AUTONOMOUS TRANSACTION

Prior to Oracle8i, there was no way in which some SQL operations within a transaction could be
committed independent of the rest of the operations. Oracle allows this, however, through
autonomous transactions. An autonomous transaction is a transaction that is started within the
context of another transaction, known as parent transaction, but is independent of it. The
autonomous transaction can be committed or rolled back regardless ot the state of the parent
transaction.
Ex:
CREATE OR REPLACE TRIGGER AUTONOMOUS_TRANSACTION_TRIGGER

after insert on student

DECLARE

pragma autonomous_transaction;
BEGIN

update student set marks = 555;

commit;
END AUTONOMOUS_TRANSACTION_TRIGGER;

Output:

SQL> select * from student;

NO NA MARKS

© Copy rights are reserved.

 226
----- ----- -- ----------
1 a 111
2 b 222
3 c 300

SQL> insert into student values(4,'d',444);

SQL> select * from student;

NO NA MARKS
---- ------ -- ----------
1 a 555
2 b 555
3 c 555
4 d 444

RESTRICTIONS ON AUTONOMOUS TRANSACTION

 If an autonomous transaction attempts to access a resource held by the main transaction,

a deadlock can occur in you program.
 You cannot mark all programs in a package as autonomous with a single PRAGMA

declaration. You must indicate autonomous transactions explicity in each program.

 To exit without errors from an autonomous transaction program that has executed at least
one INSERT or UPDATE or DELETE, you must perform an explicit commit or rollback.
 The COMMIT and ROLLBACK statements end the active autonomous transaction, but they do
not force the termination of the autonomous routine. You can have multiple COMMIT and/or
ROLLBACK statements inside your autonomous block.
 You can not rollback to a savepoint set in the main transaction.
 The TRANSACTIONS parameter in the oracle initialization file specifies the maximum number
of transactions allowed concurrently in a session. The default value is 75 for this, but you
can increase the limit.
MUTATING TABLES
There are restrictions on the tables and columns that a trigger body may access. In order to
define these restrictions, it is necessary to understand mutating and constraining tables.
A mutating table is table that is currentlty being modified by a DML statement and the trigger
event also DML statement. A mutating table error occurs when a row-level trigger tries to
examine or change a table that is already undergoing change.

© Copy rights are reserved.

 227
A constraining table is a table that might need to be read from for a referential integrity
constraint.
Ex: CREATE OR REPLACE TRIGGER MUTATING_TRIGGER

before delete on student

for each row
DECLARE

ct number;
BEGIN

select count(*) into ct from student where no = :old.no;

END MUTATING_TRIGGER;

Output: SQL> delete student where no = 1;

ERROR at line 1:
ORA-04091: table SCOTT.STUDENT is mutating, trigger/function may not see it
ORA-06512: at "SCOTT.T", line 4
ORA-04088: error during execution of trigger 'SCOTT.T'
HOW TO AVOID MUTATING TABLE ERROR ?

 By using autonomous transaction

 By using statement level trigger

What is the Dual table in Oracle?

Oracle databases contain a table with just one row, this is called 'Dual' table. It may be used in scenarios where in
a pseudocolumn like 'User' or 'Sysdate' is being queried.
It has a column called 'Dummy' with data type of varchar2(1) ... 1 being the size.

When this table is queried, it returns a column called 'Dummy'

with a value 'X'

select * from dual;

select sysdate from dual;

© Copy rights are reserved.