PQR T Limits
PQR T Limits
PQR T Limits
Thickness of ('t') Deposited Weld Type & Number of Tests required, Tension and
Thickness ('T') of Test Coupon Welded Range of Thickness ('T') of Base Metal Qualified
Metal Qualified Guided-Bend tests
From To From To Min Max Min Max Tension Side Bend Face Bend Root Bend
Inches MM Inches MM QW-150 QW-160 QW-160 QW-160
< 1/16 1.6 T 2T T 2T 2t 2 2 2
1/16 3/8 1.6 10 1/16 2T 1.6 2T 2t 2 2 2
> 3/8 < 3/4 10 < 19 3/16 2T 4.8 2T 2t 2 2 2
3/ 4 <1 1/2 19 < 38 3/16 2T 4.8 2T 2t when t < 3/4 (19mm) 2 4
3/ 4 < 1 1/2 19 < 38 3/16 2T 4.8 2T 2T when t ≥ 3/4 (19mm) 2 4
1 1/2 And Over 38 Over 3/16 8 4.8 203 2t When t < 3/4 (19mm) 2 4
1 1/2 And Over 38 Over 3/16 8 4.8 203 8" (203mm) When t ≥ 3/4 (19mm) 2 4
Notes
The following variables further resrtict the limits shown in this table when they are referenced in QW-250 for the process under considaration:
1
QW-403.9. QW-403.10, QW-402.32, and QW-407.4. Also QW-202.2, QW-202.3 and QW-202.4 Provide exemptions that superseed the limits of this table
2 For combination of welding procedures, See QW-202.4
3 Four side bends may be substituted for the required face & root bend tests., when thickness T is 3/8 in. (10mm) and over.
4 See QW-151.1, QW-151.2, and QW-151.3 for details on multiple specimens when coupon thicknesses are over 1 in. (25mm)
5 For the welding process of QW-403.7 only; otherwise per Note (1) or 2T, or 2t, whichever the applicable.