Third Grading Periodical Test in T.L.E. Grade 7 8 (Computer Hardware Servicing)
Third Grading Periodical Test in T.L.E. Grade 7 8 (Computer Hardware Servicing)
Third Grading Periodical Test in T.L.E. Grade 7 8 (Computer Hardware Servicing)
NAME:__________________________________________ Grade/Sec(Curriculum):_________________
II. Classification: Classify the following screws according to their type: PHILLIPS HEAD, FLATHEAD, TORX, or HEX.
III. Fill in the blanks by choosing from the given words: HEX DRIVER, DEBRIS, LEAD, DISTILLED, EQUALIZE,
COUNTERCLOCKWISE, PHILLIPS, STAR, CLOCKWISE, and ISOPROPYL.
1. The purpose of an antistatic wrist strap is to ________ the electrical charge between you and the equipment.
2. Turn the screwdriver _________ to tighten the screw.
3. Turn the screwdriver ________________ to loosen the screw.
4. Use a ________ head screwdriver with crosshead screws.
5. Torx screwdriver is used to loosen or tighten screws that have a ______-like depression on the top.
6. Compressed air is used to blow away dust and ______ from different computer parts without touching components.
7. Pencils should not be used inside the computer to change the setting of switches or to pry off jumpers because the tip
contains _____ which can act as a conductor and may damage the computer components.
8. To clean the screens of CRT monitors, dampen a soft, clean, lint-free cloth with _______ water and wipe the screen
from top to bottom.
9. Clean the contacts on components with _________ alcohol.
10. Use a __________ to loosen and tighten bolts that have a hexagonal (six-sided) head.
IV. Organize the following tools according to their corresponding category by writing: ESD, HAND, CLEANING, or
DIAGNOSTIC.
Prepared By:
II. Classification: Classify the following screws according to their type: PHILLIPS HEAD, FLATHEAD, TORX, or HEX.
3. Classify the picture of the screw according to its type. PHILLIPS HEAD
5. Classify the picture of the screw according to its type. PHILLIPS HEAD
10. Classify the picture of the screw according to its type. PHILLIPS HEAD
III. Fill in the blanks by choosing from the given words: HEX DRIVER, DEBRIS, LEAD, DISTILLED, EQUALIZE,
COUNTERCLOCKWISE, PHILLIPS, STAR, CLOCKWISE, and ISOPROPYL.
1. The purpose of an antistatic wrist strap is to EQUALIZE the electrical charge between you and the equipment.
2. Turn the screwdriver CLOCKWISE to tighten the screw.
3. Turn the screwdriver COUNTERCLOCKWISE to loosen the screw.
4. Use a PHILLIPS head screwdriver with crosshead screws.
5. Torx screwdriver is used to loosen or tighten screws that have a STAR -like depression on the top.
6. Compressed air is used to blow away dust and DEBRIS from different computer parts without touching components.
7. Pencils should not be used inside the computer to change the setting of switches or to pry off jumpers because the tip
contains LEAD which can act as a conductor and may damage the computer components.
8. To clean the screens of CRT monitors, dampen a soft, clean, lint-free cloth with DISTILLED water and wipe the screen
from top to bottom.
9. Clean the contacts on components with ISOPROPYL alcohol.
10. Use a HEX DRIVER to loosen and tighten bolts that have a hexagonal (six-sided) head.
IV. Organize the following tools according to their corresponding category by writing: ESD, HAND, CLEANING, or
DIAGNOSTIC.