Millennium Product Data

ADCRETE
WATER REDUCING / SET RETARDING ADMIXTURE
ADCRETE is a liquid water-reducing and set Colour : Brown

retarding admixture for concrete. It contains Specific Gravity : 1.20 ± 0.03
modified lignosulphonates and has been Dosage : 0.3 – 0.6 lit / 100kgs of total binders
formulated to give optimum performance in Product Base : Lignosulfonate
controlling setting time of concrete. ADCRETE has pH Value: 5-6
water reducing properties from 8-12% depending
on the dosage. ADCRETE does not contain any (!) COMPATIBILITY
added chloride or other potentially corroding
materials. Therefore, it may be used in prestressed ADCRETE is compatible with mineral admixtures
concrete or in the presence of aluminium or zinc such as Silica Fumes, Fly Ash, GGBFS and chemical
items. It is compatible with mineral admixtures admixtures such as waterproofing admixture, Air
such as Silica Fumes, Fly Ash, GGBFS and chemical entraining agents and corrosion inhibiting agents.
admixtures such as waterproofing admixture, Air
entraining agents and corrosion inhibiting agents. (!) DIRECTIONS FOR USE
ADCRETE is also compatible with other types of
admixtures based on napthelene sulphonate, ADCRETE should be dispensed into the fresh
malamine sulphonate and polycarboxylic ether. concrete or with the final quantity of mixing water.
ADCRETE should be dispensed with automatic
equipment, thus ensuring uniformity of admixture
(!) ADVANTAGES used throughout the job for optimum
performance. Also it can be fully dispersed with
Plastic Concrete full quantity of water prior to being added to the
• Controls rate of set dry mix of concrete. Accrete has high retarding
• Improves finishability properties and therefore it is essential to consider
• Improves workability the ambient temperature, the retardation of other
• Reduces water requirements admixture such as fly ash and type G admixtures
• Reduces segregation when deciding the dosage.
Hardened Concrete
User must be fully aware of the below mentioned
• Increases Strength
parameters which have direct influence on the
• Improves finished appearance
setting time of concrete.
• Reduces cracking
• Reduces Permeability
1. Retardation of other admixtures
2. Combined temperatures (location, day or night
(!) USES etc)
• Controls setting time 3. Cement setting time. Time at Course.
• Reduces Water 4. Temperature of the cement, aggregate and
water.
5. Intended placing location of concrete, ie.
(!) PROPERTIES
Underground or above ground column or slab
ADCRETE meets or exceeds the requirement of 6. Humidity and wind
ASTM C494 Type B & D, BS 5075 and BSEN 934-2. 7. Type of formwork, steel or wood.
It provides a controlled rate of setting for hot 8. Agitate the liquid well, prior to use.
weather concreting.
[Date : 15th Sep 2017 ADCRETE: Page 1 of 2 – Turn Over ]
Millennium Concrete Technologies (Pvt) Ltd.

647/4, Kandy Road, Kelaniya, Sri Lanka.
T : +94 11 2987622 / 11 2987752 | F: +94 11 2917305 | W: www.mctlk.com | E :info@mctlk.com
ADCRETE
WATER REDUCING / SET RETARDING ADMIXTURE
(!) DOSAGE
The optimum dosage should be determined by site
trials with the particular raw materials. As a guide,
the dosage rate is normally in the range of 0.3 litres
to 0.6 litres per 100kg of cement (inclusive of all
cementitious binders such as fly ash, silica fume,
GGBSF).
(!) PACKAGING AND STORAGE
ADCRETE is supplied in 205 litre drums or bulk

delivery. ADCRETE should be stored under shade.
The shelf life of ADCRETE is 12 months in its
unopened drums and tanks. Once opened, we
recommend that the balance be consumed within
3 months.
Agitate the liquid well, prior to use.
(!) TECHNICAL SERVICE
The company provides good servicing from a team

of dedicated specialists in the field. When used in
accordance with its current published directions,
the product will perform as described in this
catalogue. Millennium Concrete Technologies will
not be responsible for difficulties caused by other
materials, conditions or inferior workmanship and
quality control. We reserve the right to determine
the true cause of any difficulty by accepted test
methods.
[Date : 15th Sep 2017 ADCRETE: Page 2 of 2]

ADCRETE PLUS
WATER REDUCING/SET RETARDING ADMIXTURE FOR EXTENDED SLUMP RETENTION WITH
MANUFACTURED SAND AND ALL OTHER KINDS OF SAND
ADCRETE PLUS is a liquid water-reducing and set

(!) PROPERTIES
retarding admixture for concrete. It contains
modified lignosulphonates and has been ADCRETE PLUS meets or exceeds the requirement
formulated to give optimum performance in of ASTM C494 Type B & D, BS 5075 and BSEN 934-
controlling setting time of concrete. ADCRETE 2 It provides a controlled rate of setting for hot
PLUS has water reducing properties from 8- 12% weather concreting.
depending on the dosage. ADCRETE PLUS does not
contain any added chloride or other potentially Colour: Brown
corroding materials. Therefore, it may be used in Specific Gravity: 1.21 ± 0.03
prestressed concrete or in the presence of Dosage: 0.3 to 0.6 lit / 100 kg
aluminium or zinc items. ADCRETE PLUS is non- Product Base: lignosalfonate
staining and can be used in architectural concrete pH Value :5-6
without fear of discoloration. It is compatible with
mineral admixtures such as Silica Fumes, Fly Ash, (!) DIRECTIONS FOR USE
GGBFS and chemical admixtures such as
ADCRETE PLUS should be dispensed into the fresh
waterproofing admixture,air entraining agents and
concrete or with the final quantity of mixing water.
corrosion inhibiting agents. ADCRETE is also
It should not come into contact with dry cement or
compatible with other types of admixtures based
other admixtures until they are mixed in the
on napthelene sulphonate, malamine sulphonate
concrete batch. ADCRETE PLUS should be
and polycarboxylic ether.
dispensed with automatic equipment, thus
ensuring uniformity of admixture used throughout
(!) ADVANTAGES the job.
Plastic Concrete ADCRETE should be dispensed with automatic
• Longer Slump Retention equipment, thus ensuring uniformity of admixture
• Convenience of producing concrete with used throughout the job for optimum
• manufactured sand performance. Also it can be fully dispersed with
• Controls rate of set full quantity of water prior to being added to the
• Improves finishability dry mix of concrete. Accrete has high retarding
• improves workability properties and therefore it is essential to consider
• Reduces water requirements the ambient temperature, the retardation of other
• Reduces segregation admixture such as fly ash and type G admixtures
when deciding the dosage.
Hardened Concrete
• Increases Strength User must be fully aware of the below mentioned
• Improves finished appearance parameters which have direct influence on the
• Reduces cracking setting time of concrete.
• Reduces Permeability
1. Retardation of other admixtures
(!) USES
2. Combined temperatures (location, day or night
etc)
• Controls setting time 3. Cement setting time. Time at Course.
• Reduces Water
• Longer Slump Retention
[Date () ADCRETE PLUS : Page 1 of 2 – Turn Over ]

ADCRETE PLUS
WATER REDUCING/SET RETARDING ADMIXTURE FOR EXTENDED SLUMP RETENTION WITH
MANUFACTURED SAND AND ALL OTHER KINDS OF SAND
1. Temperature of the cement, aggregate and

water.
2. Intended placing location of concrete, ie.
Underground or above ground column or slab
3. Humidity and wind
4. Type of formwork, steel or wood.
5. Agitate the liquid well, prior to use.
(!) DOSAGE
trials with the available raw materials. As a guide,
the dosage rate is normally in the range of 0.3 litres
to 0.6 litres per 100kg of cement.
ADCRETE PLUS is supplied in 205 litre drums or

bulk delivery. ADCRETE PLUS should be stored
under shade. The shelf life of ADCRETE PLUS is 12
months in its unopened drums and tanks. Once
opened, we recommend that the balance be
consumed within 3 months.
Agitate the liquid well, prior to use.

methods.
[Date () ADCRETE PLUS: Page 2 of 2 ]

SUPERCRETE
HIGH RANGEWATER REDUCING / RETARDING SUPERPLASTICIZER
SUPERCRETE is a highly stable new generation (!) COMPATIBILITY

superplasticizer formulated specifically to give high
range water reduction with retarding effect for hot SUPERCRETE is compatible with mineral
weather construction. At normal 'dosage rates, admixtures such as Silica Fumes, Fly Ash, GGBFS
SUPERCRETE can produce highly fluid concrete and chemical admixtures such as waterproofing
with extended workability for placing. admixture, Air entraining agents,corrosion
SUPERCRETE has been formulated without added inhibiting agents and lignosulphonate based
chlorides. Primary function of Supercrete is water admixtures. Supercrete is not compatible with
reduction and the secondary function is polycarboxylic based admixtures.
retardation.
(!) DIRECTIONS FOR USE
SUPERCETE should be dispensed into the fresh
(!) ADVANTAGES concrete or with the final quantity of mixing water.
• Produces "flowing" concrete with controlled
other admixtures until they are mixed in the
delay of slump loss and extended workability.
concrete batch.
• Reduces segregation & bleeding in the plastic
concrete.
SUPERCRETE Will extend the time span of the
• Reduces porosity and hence permeability of
slump twice or longer compared to conventional
hardened concrete.
PNS based superplasticizers. However, variations in
• Reduces concrete placement time and cost.
slump loss and setting characteristics are a
• When used as a water reducer without cement
function of the amount of admixture used,
reduction, it Increases compressive strength by
material and ambient temperature, cement
70% to 100% depending on dosage and
characteristics and the mix design selected. An
concrete mix design.
increase in concrete temperature will cause an
increase in slump loss and a decrease in setting
(!) USES time.
• High performance concrete In the event where longer retardation is expected,

• Low water/cement concrete mix design is essential to combine with a purposely made
• High slump, flowable concrete retarder such as Adcrete or Adcrete Plus (ASTM
C494 Type B & D) to compensate inadequate
(!) PROPERTIES retardation of using only SUPERCRETE . Please
consult our technical team for further advice on
• SUPERCRETE conforms to the requirement of the combined dosages.
ASTM C494 Type G, BS 5075 and BSEN934-2 :
1987 If the slump is not adequate at the end user point,
• SUPERCRETE can be used to obtain 16% to 35% it is strongly advised to redose the concrete with
water reduction depending on dosage used. SUPERCRETE HS (non retarding super plasticizer
ASTM C494 Type F) into the concrete truck until
the required slump is achieved (please refer to
Colour: Brown
redosing chart for approximate redosing quantities
Specific Gravity: 1.18 ± 0.03
)
Dosage: 0.6 to 2.0 lit / 100kgs of total binders.
Product Base: Naphthalene Sulfonate
pH Value: 6.5 – 7.5
[Date : 15th Sep 2017 SUPERCRETE: Page 1 of 2]

SUPERCRETE
HIGH RANGE WATER REDUCING / NON RETARDING SUPERPLASTICIZER
(!) DOSAGE
The optimum dosage should be determined by
site trials with the particular raw materials. As a
guide, SUPERCRETE is normally used at a dosage
range of 0.6 litres to 2.0 litres per 100kg of
cement (inclusive of all cementitious binders such
as fly ash, silica fume, GGBSF).
When using dosages more than 1200ml of

SUPERCRETE for 100kg of cement, it is essential
to be cautious about possible over retardation of
concrete. If the concrete is produced with fly ash
or when the ambient temperature is low,
necessary dosage adjustments should be made
We strongly recommend to confirm the concrete

mix design with actual material available at site.
SUPERCRETE is supplied in 205 litre drums or bulk

delivery. SUPERCRETE should be stored under
shade. The shelf life of SUPERCRETE is 12 months
in its unopened drums and tanks. Once opened, we
recommend that the balance be consumed within
3 months.

methods.
[Date : 15th Sep 2017 SUPERCRETE : Page 2 of 2 ]

SUPERCRETE HS
SUPERCRETE HS is a highly stable new generation (!) COMPATIBILITY

admixture formulated specifically to give high
range water reduction for hot weather SUPERCRETE HS is compatible with mineral
construction. At normal dosage rates, admixtures such as Silica Fumes, Fly Ash, GGBFS
SUPERCRETE HS can produce highly fluid concrete and chemical admixtures such as waterproofing
with extended workability for placing. admixture, Air entraining agents,corrosion
SUPERCRETE HS has been formulated without inhibiting agents and lignosulphonate based
added chlorides. The main function of admixtures. Supercrete HS is not compatible with
SUPERCRETE HS is water reduction. It is polycarboxylic based admixtures.
compatible with waterproofing agent and other
admixtures.
(!) ADVANTAGES
SUPERCRETE HS should be dispensed into the
• Anticipate a higher early strength fresh concrete or with the final quantity of mixing
• Lesser dosage leads to a higher slump against water. It should not come into contact with dry
the conventional type of superplasticizer. cement or other admixtures until they are mixed in
• Reduces segregation & bleeding in the plastic the concrete batch.
concrete.
hardened concrete. SUPERCRETE HS Will extend the time span of the
• Reduces concrete placement time and cost. slump twice or longer compare to conventional
When used as a water reducer without cement superplasticizers. However, variations in slump loss
reduction, it Increases compressive strength by and setting characteristics are a function of the
70% to 100% depending on dosage and amount of admixture used, material and ambient
concrete mix design. temperature, cement characteristics and the mix
design selected. An increase in concrete
(!) USES temperature will cause an increase in slump loss
and a decrease in setting time.
• High performance concrete.
• Low water/cement concrete mix design In the event when concrete needs to be retarded
• High slump, flowable concrete for longer transport, horizontally or vertically – it is
• High early strength concrete essential to combine it with a retarder such as
• Redosing of low slump concrete. Adcrete or Adcrete Plus.
(!) PROPERTIES
(!) DOSAGE
• SUPERCRETE HS conforms to the requirement The optimum dosage should be determined by site
of ASTM C494 Type F, BS 5075 and BSEN934-2. trials with the particular raw materials. As a guide,
• SUPERCRETE HS can be used to obtain up to to SUPERCRETE HS is normally used at a dosage
35% water reduction depending on dosage range of 0.6 litres to 2.0 litres per 100kg of cement
used. (inclusive of all cementitious binders such as fly
Colour: Brown ash, silica fume, GGBSF).
Dosage: 0.6 to 2.0 lit / 100kg of total binders.
Product Base: Naphthalene Sulfonate
pH Value: 7-8
[Date : 18th Feb 2018 SUPERCRETE HS: Page 1 of 2 ]

SUPERCRETE HS
SUPERCRETE HS is supplied in 205 litre drums or

bulk delivery. SUPERCRETE HS should be stored
under shade. The shelf life of SUPERCRETE HS is 12
months in its unopened drums and tanks. Once
opened, we recommend that the balance be
consumed within 3 months.

methods.
[Date : 18th Feb 2018 SUPERCRETE HS: Page 2 of 2 ]

HYPERCRETE
NEW GENERATION POLYCARBOXYLIC BASED SUPERPLASTICIZER
HYPERCRETE is polycarboxylic ether based (!) COMPATIBILITY

advanced superplasticizer which is specially
developed for Self Compacting Concrete Please seek the advice of Millennium Concrete
applications. The product could be used for Technologies before being used with other
virtually any type of ready-mix concreting where admixtures.
the slump retention is important.
HYPERCRETE is compatible with all types of HYPERCRETE should be dispensed into the fresh
cements and other mineral admixtures. concrete or with the final quantity of mixing water.
HYPERCRETE is free of chlorides and meets the other admixture until they are mixed in the
requirements of ASTM C494Type A & F and concrete batch.
BS 507 5.
(!) DOSAGE
Sulfonic groups of Naphthalene or Melamine
based admixtures which adsorbed on to the
trials with particular raw materials. As a guide
cement particles induce a negative charge and
HYPERCRETE is normally used at a dosage 600ml
repulse each other and increase the workability.
to 2000ml per IOOkg of cement. However for
With a similar mechanism, but unlike sulfonic
specific requirements dosages outside the above
groups, the Iateral chains of the main polymer of
could be used.
polycarboxylic ether induce a steric hindrance
with strong repulsive force which in tern increase
the workability of the cement paste. (!) PACKAGING AND STORAGE
HYPERCRETE R is supplied in 205 L drums, 1000 L

Colour: Clear to Pale Yellow IBC tanks or in bulks tankers of 2400L
Dosage: 0.6 to 2.0 lit / 100kg HYPERCRETE R has a shelf life of 6 months in its
Product Base: polycarboxylic ether unopened drums.
pH : Value: 5-6 .
(!) SAFETY OF HANDLING
HYPERCRETE does not contain any hazardous

(!) ADVANTAGES chemicals and non toxic. But it is recommended
• Make fluid concrete that safety glows are used in handling the product.
• Self Compacting Concrete
• Longer slump retention. (!) TECHNICAL SERVICE
• No bleeding & segregation. The company provides good servicing from a team
• Reduce shrinkage and creep. of dedicated specialists in the field. When used in
• Reduces porosity and hence permeability of accordance with its current published directions,
hardened concrete. the product will perform as described in this
• Rheoplasticity leads to a densely compacted catalogue. Millennium Concrete Technologies will
durable concrete at hardened state. not be responsible for difficulties caused by other
• Substantially reduce the placement cost and materials , conditions or inferior workmanship and
the time. quality control. We reserve the right to determine
• Esthetically attractive surface texture and the true cause of any difficulty by accepted test
sound finish. methods.
• Very high water reduction and thereby low
permeability and shrinkage.
• Less pumping pressure and ease of pumping.
• Helps in hot weather concreting

HYPERCRETE R
HYPERCRETE R is polycarboxylic ether based (!) COMPATIBILITY

developed for Self Compacting Concrete Please seek the advice of Millennium Concrete
applications. The product could be used for Technologies before being used with other
virtually any type of ready-mix concreting where admixtures.
the slump retention is important.
HYPERCRETE R is compatible with all types of HYPERCRETE R should be dispensed into the fresh
cements and other mineral admixtures. concrete or with the final quantity of mixing water.
HYPERCRETE R is free of chlorides and meets the other admixture until they are mixed in the
requirements of ASTM C494Type A & F and concrete batch.
BS 507 5.
(!) DOSAGE
trials with particular raw materials. As a guide
HYPERCRETE R is normally used at a dosage
repulse each other and increase the workability.
600ml to 1700ml per IOOkg of cement. However
With a similar mechanism, but unlike sulfonic
for specific requirements dosages outside the
groups, the Iateral chains of the main polymer of
above could be used. Specific Gravity is 1.06± 0.03
polycarboxylic ether induce a steric hindrance
the workability of the cement paste. (!) PACKAGING AND STORAGE
HYPERCRETE R is supplied in 205 L drums, 1000 L

Colour: Clear to Pale Yellow
IBC tanks or in bulks tankers of 2400L
Dosage: 0.6 to 1.7 lit / 100kg
HYPERCRETE R has a shelf life of 6 months in its
Product Base: polycarboxylic ether
unopened drums.
pH Value: 4-5
.
(!) ADVANTAGES
HYPERCRETE does not contain any hazardous
• Make fluid concrete chemicals and non toxic. But it is recommended
• Self Compacting Concrete that safety glows are used in handling the product.
• Longer slump retention.
• No bleeding & segregation. (!) TECHNICAL SERVICE
• Reduce shrinkage and creep.
hardened concrete.
• Rheoplasticity leads to a densely compacted
durable concrete at hardened state.
• Substantially reduce the placement cost and
the time.
materials , conditions or inferior workmanship and
• Esthetically attractive surface texture and
sound finish.
methods.

HYPERCRETE HS
HYPERCRETE HS is polycarboxylic ether based

(!) COMPATIBILITY
developed for precast concrete applications. Please seek the advice of Millennium Concrete
Hence the product could be used for virtually any Technologies before being used with other
type of concreting where high early strength is admixtures.
important. HYPERCRETE HS is compatible with all
types of cements and other mineral admixtures.
HYPERCRETE HS is free of chlorides and meets
HYPERCRETE HS should be dispensed into the
the requirements of ASTM C494Type A & F and
fresh concrete or with the final quantity of mixing
BS 507 5.
water. It should not come into contact with dry
cement or other admixture until they are mixed in
the concrete batch.
repulse each other and increase the workability. (!) DOSAGE
With a similar mechanism, but unlike sulfonic The optimum dosage should be determined by site
groups, the Iateral chains of the main polymer of trials with particular raw materials. As a guide
polycarboxylic ether induce a steric hindrance HYPERCRETE HS is normally used at a dosage
with strong repulsive force which in tern increase 400ml to 900ml per 100kg of cement. However for
the workability of the cement paste. specific requirements dosages outside the above
could be used.

Specific Gravity: 1.05 ± 0.02 (!) PACKAGING AND STORAGE
HYPERCRETE HS is supplied in 205 L drums, 1000
L IBC tanks or in bulks tankers of 2400L
pH Value: 4-5
HYPERCRETE HS has a shelf life of 6 months in its
unopened drums. Once opened the balance should
(!) ADVANTAGES be consumed within 3 weeks.
• Can make fluid concrete for SCC.
• Achieves high early strength. (!) SAFETY OF HANDLING
• No bleeding & segregation. HYPERCRETE HS does not contain any hazardous
• Reduce shrinkage and creep. chemicals and non toxic. But it is recommended
• Reduces porosity and hence permeability of that safety glows are used in handling the product.
hardened concrete.
• Rheoplasticity leads to a densely compacted (!) TECHNICAL SERVICE
• Substantially reduce the placement cost and The company provides good servicing from a team
the time. of dedicated specialists in the field. When used in
• Esthetically attractive surface texture and accordance with its current published directions,
sound finish. the product will perform as described in this
• Very high water reduction and thereby low catalogue. Millennium Concrete Technologies will
permeability and shrinkage. not be responsible for difficulties caused by other
• Less pumping pressure and ease of pumping. materials , conditions or inferior workmanship and
methods.

HYPERCRETE PLUS
HYPERCRETE PLUS is polycarboxylic ether based

(!) COMPATIBILITY
developed for workability retention of low slump Please seek the advice of Millennium Concrete
concrete. The product could be used for virtually Technologies before being used with other
any type of readymix concreting where the slump admixtures.
retention is important.
HYPERCRETE PLUS is compatible with all types of HYPERCRETE PLUS should be dispensed into the
cements and other mineral admixtures. pre measured water quantity. This helps the
HYPERCRETE PLUS is free of chlorides and meets admixture to be mixed homogeneously in the
the requirements of ASTM C494 Type A&G and concrete. It should not come into contact with dry
BS 5075. cement or other admixture until they are mixed in
the concrete batch.
based admixtures which adsorbed on to the (!) DOSAGE
cement particles induce a negative charge and The optimum dosage should be determined by site
repulse each other and increase the workability. trials with particular raw materials. As a guide
With a similar mechanism, but unlike sulfonic HYPERCRETE PLUS is normally used at a dosage
groups, the lateral chains of the main polymer of 600m1 to 1200m1 per l00kg of cement. However
polycarboxylic ether induce a steric hindrance for specific requirements dosages outside the
with strong repulsive force which in tern increase above could be used.
the workability of the cement paste.
HYPERCRETE PLUS is supplied in205L drums or in
Specific Gravity:1.07 ± 0.02
bulks tankers of 2400 L. HYPERCRETE PLUS has a
shelf life of 12 months in its unopened drums. Once
opened the balance be consumed within 3 months.
pH Value: 3-4
(!) SPECIAL ADVANTAGES (!) SAFETY OF HANDLING
• Longer slump retention for concrete where HYPERCRETE PLUS does not contain any hazardous
maximum slump range is less than 200mm. chemicals and non toxic. But it is recommended that
• Higher concrete density safety glows are used in handling the product.
• Higher strength
(!) ADVANTAGES The company provides good servicing from a team
• No bleeding & segregation.
• Reduce shrinkage and creep.
hardened concrete.
materials , conditions or inferior workmanship and
• Rheoplasticity leads to a densely compacted
methods.
sound finish.

HYPERCRETE PLUS M
HYPERCRETE PLUS M is polycarboxylic ether

(!) COMPATIBILITY
based advanced superplasticizer which is specially
developed for workability retention of high slump Please seek the advice of Millennium Concrete
retention is important.
HYPERCRETE PLUS M is compatible with all types HYPERCRETE PLUS M should be dispensed into
of cements and other mineral admixtures. the pre measured water quantity. This helps the
admixture to be mixed homogeneously in the
HYPERCRETE PLUS M is free of chlorides and concrete. It should not come into contact with dry
meets the requirements of ASTM C494 Type A&G cement or other admixture until they are mixed in
and BS 5075. the concrete batch.
Sulfonic groups of Naphthalene or Melamine (!) DOSAGE

based admixtures which adsorbed on to the The optimum dosage should be determined by site
cement particles induce a negative charge and trials with particular raw materials. As a guide
repulse each other and increase the workability. HYPERCRETE PLUS M is normally used at a dosage
With a similar mechanism, but unlike sulfonic 600m1 to 1200m1 per l00kg of cement. However
groups, the lateral chains of the main polymer of for specific requirements dosages outside the
polycarboxylic ether induce a steric hindrance above could be used.
Colour: Clear to Pale Yellow HYPERCRETE PLUS M is supplied in205L drums or
Specific Gravity: 1.07 ± 0.02 in bulks tankers of 2400 L. HYPERCRETE PLUS M
Dosage:0.6 to 1.2 lit / 100kg has a shelf life of 12 months in its unopened drums.
Product Base: polycarboxylic ether Once opened the balance be consumed within 3
pH Value: 3-4 weeks.
(!) SPECIAL ADVANTAGES (!) SAFETY OF HANDLING
• High Initial Workability HYPERCRETE PLUS M does not contain any

• Stable Slump hazardous chemicals and non toxic. But it is
• Higher Concrete Density recommended that safety glows are used in handling
• Higher Strength the product.
(!) ADVANTAGES
• No bleeding & segregation. The company provides good servicing from a team
• Reduce shrinkage and creep. of dedicated specialists in the field. When used in
• Reduces porosity and hence permeability of accordance with its current published directions,
hardened concrete. the product will perform as described in this
• Rheoplasticity leads to a densely compacted catalogue. Millennium Concrete Technologies will
durable concrete at hardened state. not be responsible for difficulties caused by other
• Esthetically attractive surface texture and materials , conditions or inferior workmanship and
sound finish. quality control. We reserve the right to determine
• Very high water reduction and thereby low the true cause of any difficulty by accepted test
permeability and shrinkage. methods.

HYPERCRETE PLUS SP
HYPERCRETE PLUS SP is polycarboxylic ether

(!) COMPATIBILITY
based advanced superplasticizer which is specially
developed for workability retention of high slump Please seek the advice of Millennium Concrete
retention is important. (!) DIRECTIONS FOR USE
HYPERCRETE PLUS SP is compatible with all types HYPERCRETE PLUS SP should be dispensed into
of cements and other mineral admixtures. the pre measured water quantity. This helps the
HYPERCRETE PLUS SP is free of chlorides and admixture to be mixed homogeneously in the
meets the requirements of ASTM C494 Type A&G concrete. It should not come into contact with dry
and BS 5075. cement or other admixture until they are mixed in
the concrete batch.
based admixtures which adsorbed on to the (!) DOSAGE
cement particles induce a negative charge and The optimum dosage should be determined by site
repulse each other and increase the workability. trials with particular raw materials. As a guide
With a similar mechanism, but unlike sulfonic HYPERCRETE PLUS SP is normally used at a
groups, the lateral chains of the main polymer of dosage 600m1 to 1200m1 per l00kg of cement.
polycarboxylic ether induce a steric hindrance However for specific requirements dosages outside
with strong repulsive force which in tern increase the above could be used.
Colour: Clear to Pale Yellow HYPERCRETE PLUS SP is supplied in205L drums

Specific Gravity: 1.06 ± 0.02 or in bulks tankers of 2400 L. HYPERCRETE PLUS
Dosage: 0.6 to 0 1.5 lit / 100kg SP has a shelf life of 12 months in its unopened
Product Base: polycarboxylic ether drums. Once opened the balance be consumed
pH Value: 4-5 within 3 weeks.
(!) SPECIAL ADVANTAGES
HYPERCRETE PLUS SP does not contain any
• Suitable to produce Self Compacting Concrete hazardous chemicals and non toxic. But it is
• Initial High Workability recommended that safety glows are used in handling
• Higher Concrete Density the product.
• Higher Strength
(!) ADVANTAGES of dedicated specialists in the field. When used in
• Longer slump retention. the product will perform as described in this
• No bleeding & segregation. catalogue. Millennium Concrete Technologies will
• Reduce shrinkage and creep. not be responsible for difficulties caused by other
• Reduces porosity and hence permeability of materials , conditions or inferior workmanship and
hardened concrete. quality control. We reserve the right to determine
• Rheoplasticity leads to a densely compacted the true cause of any difficulty by accepted test
durable concrete at hardened state. methods.
sound finish.

ACCELERATING ADMIXTURE FOR MASS CONCRETE
RAPIDCRETE ready to use, liquid admixture is (!) DOSAGE

designed to make more uniform and predictable
quality concrete while accelerating the setting time The optimum dosage should be determined by site
and strength development. trials with the particular raw materials. As a guide,
the dosage rate is normally in the range of 1 litre to
RAPIDCRETE admixture meets ASTM C 494 3 litres per 100kg of cement.
requirements for Type C, accelerating, admixture.
Colour: Brown
Specific Gravity: 1.45 ± 0.03 RAPIDCRETE should be dispensed into the fresh
Dosage: 1.0 to 3.0 lit / 100kg concrete or with the final quantity of mixing water.
Product Base: chloride It should not come into contact with dry cement or
pH Value: 6-7 other admixtures until they are mixed in the
concrete batch. RAPIDCRETE should be ideally
dispensed with automatic equipment, thus
(!) FEATURES ensuring uniformity of admixture used throughout
the job.
• Increased early and ultimate strengths-
compressive and flexural
• Accelerated setting time characteristics
• Can be used for concrete interlocking blocks, RAPIDCRETE is supplied in 5, 10,25 and 205 liters
paving slabs, curb stones, cement blocks or drums or bulk delivery. RAPIDCRETE should be
any other nonstructural concrete work. stored under shade. The shelf life of RAPIDCRETE
• On site, RAPIDCRETE can be used for is 12 months in its unopened drums and tanks.
concrete void fillings, concrete or mortar Once opened, we recommend that the balance be
beddings, rendering, plastering consumed within 3 months. Stir the content prior
• Highly recommended for concrete roads, to use.
Roller compacted concrete where early
strength is critically important (!) TECHNICAL SERVICE
• Not recommended for reinforced or pre-
stressed concrete.
(!) ADVANTAGES accordance with its current published directions,
• Superior finishing characteristics for flatwork not be responsible for difficulties caused by other
and cast surfaces materials, conditions or inferior workmanship and
• Earlier finishing of slabs - reduced labor costs quality control. We reserve the right to determine
• Reduced protection time in cold weather the true cause of any difficulty by accepted test
• Earlier stripping and reuse of forms methods.
• Easy to disperse In concrete mixtures,
avoiding many of the problems associated
with powder admixtures.


Millennium Product Data

Uploaded by

Copyright:

Available Formats

Millennium Product Data

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Millennium Product Data

Uploaded by

Copyright:

Available Formats

ADCRETE

WATER REDUCING / SET RETARDING ADMIXTURE

ADCRETE is a liquid water-reducing and set Colour : Brown

[Date : 15th Sep 2017 ADCRETE: Page 1 of 2 – Turn Over ]

Millennium Concrete Technologies (Pvt) Ltd.

ADCRETE is supplied in 205 litre drums or bulk

Agitate the liquid well, prior to use.

(!) TECHNICAL SERVICE

The company provides good servicing from a team

[Date : 15th Sep 2017 ADCRETE: Page 2 of 2]

Millennium Concrete Technologies (Pvt) Ltd.

ADCRETE PLUS is a liquid water-reducing and set

Millennium Concrete Technologies (Pvt) Ltd.

1. Temperature of the cement, aggregate and

(!) PACKAGING AND STORAGE

ADCRETE PLUS is supplied in 205 litre drums or

Agitate the liquid well, prior to use.

(!) TECHNICAL SERVICE

The company provides good servicing from a team

[Date () ADCRETE PLUS: Page 2 of 2 ]

Millennium Concrete Technologies (Pvt) Ltd.

SUPERCRETE is a highly stable new generation (!) COMPATIBILITY

• High performance concrete In the event where longer retardation is expected,

[Date : 15th Sep 2017 SUPERCRETE: Page 1 of 2]

Millennium Concrete Technologies (Pvt) Ltd.

When using dosages more than 1200ml of

We strongly recommend to confirm the concrete

(!) PACKAGING AND STORAGE

SUPERCRETE is supplied in 205 litre drums or bulk

(!) TECHNICAL SERVICE

The company provides good servicing from a team

[Date : 15th Sep 2017 SUPERCRETE : Page 2 of 2 ]

Millennium Concrete Technologies (Pvt) Ltd.

SUPERCRETE HS is a highly stable new generation (!) COMPATIBILITY

[Date : 18th Feb 2018 SUPERCRETE HS: Page 1 of 2 ]

Millennium Concrete Technologies (Pvt) Ltd.

(!) PACKAGING AND STORAGE

SUPERCRETE HS is supplied in 205 litre drums or

(!) TECHNICAL SERVICE

The company provides good servicing from a team

[Date : 18th Feb 2018 SUPERCRETE HS: Page 2 of 2 ]

Millennium Concrete Technologies (Pvt) Ltd.

HYPERCRETE is polycarboxylic ether based (!) COMPATIBILITY

HYPERCRETE R is supplied in 205 L drums, 1000 L

HYPERCRETE does not contain any hazardous

Millennium Concrete Technologies (Pvt) Ltd.

HYPERCRETE R is polycarboxylic ether based (!) COMPATIBILITY

HYPERCRETE R is supplied in 205 L drums, 1000 L

Millennium Concrete Technologies (Pvt) Ltd.

HYPERCRETE HS is polycarboxylic ether based

Colour: Clear to Pale Yellow

Millennium Concrete Technologies (Pvt) Ltd.

HYPERCRETE PLUS is polycarboxylic ether based

(!) SPECIAL ADVANTAGES (!) SAFETY OF HANDLING

Millennium Concrete Technologies (Pvt) Ltd.

HYPERCRETE PLUS M is polycarboxylic ether

Sulfonic groups of Naphthalene or Melamine (!) DOSAGE

(!) SPECIAL ADVANTAGES (!) SAFETY OF HANDLING

• High Initial Workability HYPERCRETE PLUS M does not contain any