Digimag Digital Differential Pressure and Flow Gages: 24 Volt or Battery Powered, Fits in Magnehelic Gage Cut-Out
Digimag Digital Differential Pressure and Flow Gages: 24 Volt or Battery Powered, Fits in Magnehelic Gage Cut-Out
Series ®
DigiMag Digital Differential Pressure and
PRESSURE
DM-1000
Flow Gages ®
24 Volt or Battery Powered, Fits in Magnehelic Gage Cut-Out
Ø5.00 2.33
The Digi-Mag® Series DM-1000 Digital Differential Pressure and Flow Gages SPECIFICATIONS
monitor the pressure of air and compatible gases, just as its famous analog predecessor Service: Air and non-combustible, compatible gases.
the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific Wetted Materials: Consult factory.
ranges as listed in the chart below. The 4-digit LCD can display readings in common Housing Materials: Glass filled plastic.
English and metric units so conversions are not necessary. The simplified four button Accuracy: ±1% FS including linearity, hysteresis and repeatability; ±2% FS for
operation reduces set up time and simplifies calibration with its digital push button zero ranges 1 in w.c. and below.
and span. Temperature Limits: 0 to 140°F (-18 to 60°C).
The DigiMag® Digital Gages are more versatile than analog gages with their ability to be Compensated Temperature Limits: 32 to 122°F (0 to 50°C).
field-programmed to select pressure, air velocity or flow operation depending on model. Long Term Stability: ±1% FS per year.
The DigiMag® Digital Gages have an added feature for filter applications where a set point Thermal Effect: ±0.05% FS/°F typ.; ±0.10% FS/°F for ranges 1 in w.c. and below.
can be input where the display will blink when the filter is dirty, alerting the user that a Display: 4-digit LCD (digits: 0.60H x 0.33W).
maintenance action needs to occur. Display Update: Selectable for 1 second to 10 minutes or update only from button
Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus push.
which provide access to depending on model: Security level; engineering units; K-factor Pressure Limits: Normal and bi-directional ranges 5 in w.c. and lower = 2 psi
for use with various Pitot tubes and flow sensors, circular or rectangular duct size for (13.7 kPa); Normal and bi-directional ranges 10 in w.c. and higher = 11 psi (75
volumetric flow operation; filter set point; view peak and valley process readings; digital KPa).
damping for smoothing erratic process applications; display update to conserve battery Selectable Engineering Units: in w.c., psi, kPa, Pa, mm w.c., mBar, in Hg, mm
life; zero and span field calibration. Hg, FS (0-100%).
The Series DM-1000 DigiMag® Digital Differential Pressure and Air Flow Gages possess Power Requirements: 9 V alkaline battery, included, user replaceable or external
a full-scale accuracy of 1% on ranges down to 2 in w.c. and 2% accuracy down to the very power supply 9-24 VDC.
low ranges of 1 in to 0.25 in w.c. DigiMag® Digital Differential Pressure Gages offer power Battery Service Life: Battery life depending on the display update setting: 150
versatility by working with 9-24 VDC line power or simply 9V battery power. If using line hours (typical) if display update = 1 second; 9 month (typical) if display update =
power and connecting the 9V battery, the battery will act as a back-up if line power is lost 10 minutes; 1.5 years (typical) if display update is disabled. Battery may last up to
or interrupted. four times longer when using lithium-based battery ULTRALIFE U9VL-J.
Current Consumption: 5 mA max.
Electrical Connections: Removable terminal block for 16 to 26 AWG.
ACCESSORIES Electrical Entry: Cable gland for 0.114 to 0.250˝ (2.9 to 6.4 mm) diameter cable.
A-299, Surface Mounting Bracket Process Connections: 1/8˝ (3 mm) ID tubing.
A-300, Flat Flush Mounting Bracket Enclosure Rating: NEMA 4X (IP66).
A-286, 4-1/2˝ Gage Panel Mounting Flange Weight: 1.18 lb (535 g).
A-489, 4˝ Straight Static Pressure Tip with Flange Size: 5˝ (127 mm) OD front face.
A-480, Plastic Static Pressure Tip Agency Approvals: CE.
OPTION
For NIST traceable calibration certificate, add suffix -NIST to model numbers.
Example: DM-1103-NIST.
Range Resolution
Model (in w.c.) psi kPa Pa mbar mm w.c. in Hg mm Hg % of FS (in w.c.)
DM-1102 0.250 – 0.062 62.20 0.622 6.35 – 0.467 100.0 0.001
DM-1103 0.500 – 0.124 124.5 1.245 12.70 – 0.934 100.0 0.001
DM-1104 1.000 – 0.249 249.1 2.492 25.40 – 1.868 100.0 0.001
DM-1105 2.000 – 0.498 498.2 4.982 50.80 – 3.736 100.0 0.001
DM-1107 5.000 0.181 1.245 1245 12.45 127.0 0.368 9.34 100.0 0.002
DM-1108 10.00 0.361 2.491 2491 24.91 254.0 0.736 18.68 100.0 0.010
DM-1109 15.00 0.543 3.738 3738 37.38 381.0 1.104 28.02 100.0 0.010
DM-1110 25.00 0.903 6.227 6227 62.27 635.0 1.839 46.71 100.0 0.010
DM-1111 50.00 1.806 12.45 – 124.5 1270 3.678 93.42 100.0 0.020
DM-1112 100.0 3.613 24.91 – 249.1 2540 7.355 186.8 100.0 0.100
Contact the factory for available bi-directional ranges from ±0.25 to ±10 in w.c.
Note: For air flow models change -11XX to -12XX. Process Tubing Options: See page 547 (Gage Tubing Accessories)
CONTACT US | U.S. 219/879-8000 | U.K. (+44) (0)1494-461707 | A.U. (+61) (0) 2 4272 2055 | China +852-23181007 9