The 40/40I Triple IR Flame Detector can detect small fuel and gas fires from long distances with a high level of immunity to false alarms. It features a triple spectrum design, adjustable sensitivity levels, self-testing capabilities, and a heated window to operate in harsh weather. The 40/40I provides various output and communication options, is approved for hazardous area use, and comes with a 5-year warranty due to its high reliability and durability.
The 40/40I Triple IR Flame Detector can detect small fuel and gas fires from long distances with a high level of immunity to false alarms. It features a triple spectrum design, adjustable sensitivity levels, self-testing capabilities, and a heated window to operate in harsh weather. The 40/40I provides various output and communication options, is approved for hazardous area use, and comes with a 5-year warranty due to its high reliability and durability.
The 40/40I Triple IR Flame Detector can detect small fuel and gas fires from long distances with a high level of immunity to false alarms. It features a triple spectrum design, adjustable sensitivity levels, self-testing capabilities, and a heated window to operate in harsh weather. The 40/40I provides various output and communication options, is approved for hazardous area use, and comes with a 5-year warranty due to its high reliability and durability.
The 40/40I Triple IR Flame Detector can detect small fuel and gas fires from long distances with a high level of immunity to false alarms. It features a triple spectrum design, adjustable sensitivity levels, self-testing capabilities, and a heated window to operate in harsh weather. The 40/40I provides various output and communication options, is approved for hazardous area use, and comes with a 5-year warranty due to its high reliability and durability.
40/40I Triple IR (IR3) Flame Detector Superior performance, reliability and immunity to false alarms
FEATURES & BENEFITS
• Triple Spectrum Design - for long distance detection and high false alarm immunity • Sensitivity Selection - to ensure no zone crossover detection • Automatic and Manual Built-In-Test (BIT) - to assure continued reliable operation • Heated window - for operation in harsh weather conditions (snow, ice, condensation) • Multiple output options for maximum flexibility and compatibility - Relays (3) for Alarm, Fault and Auxiliary - 0-20mA (stepped) - HART Protocol for maintenance and asset management - RS-485, Modbus Compatible • High Reliability - MTBF - minimum 150,000 hours • Approved to Safety Integrity Level 2 (SIL2 – TUV) The new 40/40I Triple IR (IR3) Flame • 5-Year Warranty Detector detects fuel and gas fires at long distances with the highest immunity to false • User Programmable via HART or RS-485 alarms. The 40/40I IR3 can detect a 1ft2 • Ex approved for Zone 1 hazardous area location (0.1m2) gasoline pan fire at 215 ft (65m) - ATEX in less than 5 seconds. - IECEx - FM/FMC The 40/40I is the most durable and weather resistant flame detector currently on the - CSA market. Its new features include a heated • 3rd party Performance Tested window, to eliminate condensation and - EN54-10 (LPCB) icing; HART capabilities for digital - FM3260 (FM) communications; lower power requirements; - DNV Marine Approval and a compact, lighter design. Due to increased reliability, the 40/40 Series APPLICATIONS warranty period has been extended to 5 years and is SIL2 (TUV) approved Offshore Oil & Gas Power Generation facilities to IEC 61508. installations Pharmaceutical Industry Onshore Oil & Gas Printing Industry installations and pipelines Warehouses Chemical plants Automotive Industry Petrochemicals plants Explosives & Munitions Storage Tank farms Waste Disposal facilities Aircraft hangars
Headquarters: 218 Little Falls Road | Cedar Grove | NJ 07009 | USA
Tel: +1 (973) 239-8398 | +1 (800) 452-2107 (US only) | Fax: +1 (973) 239-7614 Houston: +1 (832) 321-5229 | Europe: +44 (141) 578-0693 E-mail: spectrex@spectrex.net | Website: www.spectrex-inc.com keep a on your safety GENERAL SPECIFICATIONS Spectral Response Three IR Bands Detection Range Fuel ft / m Fuel ft / m Fuel ft / m (at highest Sensitivity Setting n-Heptane 215 / 65 Kerosene 150 / 45 Methane* 100 / 30 for 1ft2 (0.1m2) pan fire) Gasoline 215 / 65 Ethanol 95% 135 / 40 LPG * 100 / 30 Diesel Fuel 150 / 45 Methanol 115 / 35 Polypropylene Pellets 16 / 5 JP5 150 / 45 IPA (Isopropyl Alcohol) 135 / 40 Office Paper 33 / 10 * 20" (0.5m) high, 8" (0.2m) width plume fire Response Time Typically 5 seconds Adjustable Time Delay Up to 30 seconds Sensitivity Ranges 4 Sensitive ranges for 1 ft2 (0.1m2) n-heptane pan fire from 50 ft (15m) to 215 ft (65m) Field of View Horizontal 100º; Vertical 95º Built-in-Test (BIT) Automatic (and Manual) Temperature Range Operating: -67ºF to +167ºF (-55ºC to +75ºC) Option: -67ºF to +185ºF (-55ºC to +85ºC) Storage: -67ºF to +185ºF (-55ºC to +85ºC) Humidity Up to 95% non-condensing (withstands up to 100% RH for short periods) Heated Optics To eliminate condensation and icing on the window ELECTRICAL SPECIFICATIONS Operating Voltage 24 VDC nominal (18-32 VDC) Power Consumption Standby: Max. 90mA (110mA with heated window) Alarm: Max. 130mA (160mA with heated window) Cable Entries 2 x 3/4" - 14NPT conduits or 2 x M25 x 1.5 mm ISO Wiring 12 - 22AWG (2.5mm2 - 0.3mm2) Electrical Input Protection According to MIL-STD-1275B Electromagnetic Compatibility EMI/RFI protected to EN61326-3 and EN61000-6-3 Electrical Interface The detector includes twelve (12) terminals with five (5) wiring options (factory set)
OUTPUTS Relays Alarm, Fault and Auxiliary SPST volt-free contacts rated 5A at 30 VDC or 250 VAC. 0-20mA (stepped) Sink (source option) configuration Fault: 0 +1mA Warning: 16mA ± 5% BIT Fault: 2mA ± 10% Alarm: 20mA ± 5% Normal: 4mA ± 10% Resistance Loop: 100-600 Ω HART Protocol Optional HART communications on the 0-20mA analog current (FSK) - used for maintenance, configuration changes and asset management, available in mA source output wiring options RS-485 RS-485 Modbus compatible communication link that can be used in computer controlled installations MECHANICAL SPECIFICATIONS Materials - Stainless Steel 316L with electro polish finish Enclosure options - Heavy duty copper free aluminum (less than 1%), red epoxy enamel finish Mounting Stainless Steel 316L with electro polish finish Dimensions Detector 4" x 4.6" x 6.18" (101.6 x 117 x 157 mm) Weight Detector (St.St.) 6.1 lb (2.8 kg) Tilt mount 2.2 lb (1.0 kg) Detector, aluminum 2.8 lb (1.3 kg) Environmental Standards Meets MIL-STD-810C for Humidity, Salt & Fog, Vibration, Mechanical Shock, High Temp, Low Temp Water and Dust IP66 and IP67 per EN60529, NEMA 250 6P APPROVALS Hazardous Area ATEX and IECEx Ex II 2 GD, Ex de IIC T5 (-55ºC to +75ºC) Ex de IIC T4 (-55ºC to +85ºC) Ex tD A21 IP66/X7 T 95ºC Ex tD A21 IP66/X7 T 105ºC FM/FMC/CSA Class I Div. 1, Groups B, C & D Class II/III Div. 1, Groups E, F & G Performance EN54-10 (LPCB) FM-3260 (FM) DNV Marine Approval Reliability IEC61508 - SIL2 (TUV) ACCESSORIES Fire Simulator 20/20-310 U-Bolt/Pole Mount 789260-2 (2" pole) Mini Laptop Kit 777820 Laser Pointer 777166 Tilt Mount 40/40-001 789260-1 (3" pole) Weather Protector 777163 (Detector area coverage) Duct Mount 777670 USB RS485 Harness Kit 794079-5 Air Shield 777161
Specifications subject to changes
DS-F-40/40I, March 2012 For more information view manual or website www.spectrex-inc.com
