CL CL CL CL Clut UT UT UT Utches Ches Ches Ches Ches: Quick - Reference Guide

13
Highg
Highgaate Automotive Air Conditioning Catalogue CLUTCHES
GROOVE
(BELT SECTION)
PULLEY
PULLEY
DIAMETER
DIAMETER
(CLUTCH DIAMETER)
CLUTCHES
QUICK - REFERENCE GUIDE
ITEM DETAILS PAGE

CLUTCH IDENTIFICATION - BASIC TYPES ................................................... 14
CLUTCH MEASUREMENT - PULLEY GROOVE, PULLEY DIAMETER ........ 14
- MOUNTING DISTANCE (GAUGE-LINE) ......... 14
CLUTCH ASSEMBLIES - BOSCH ............................................................ 15
- DELCO (HARRISON) ........................................ 15
- DELPHI .............................................................. 15
- DIESEL - KIKI (ZEXEL) .................................... 15
- FORD .................................................................. 24
- MATSUSHITA (PANASONIC) ............................ 16
- NIPPON DENSO ............................................... 16
- PANASONIC (MATSUSHITA) ............................ 16
- SANDEN .......................................................... 16 - 22
- SEIKO-SEIKI .................................................... 23
- TAMA ............................................................... 23
- UNICLA ............................................................ 23
- YORK - TECUMSEH ......................................... 24 - 25
CLUTCH PARTS - QUICK - REFERENCE GUIDE .......................... 26
- PARTS IDENTIFICATION ............................... 26
- ILLUSTRATED PARTS LISTING ..................... 27 - 31 C
14
CLUTCHES Highgate
Highga Automotive Air Conditioning Catalogue
Clutch Identification and Measurement
Clutch Identification / Measurement Guide 7/8"

(19mm)
5/8"
3/8" 1/2" (16mm)
(10mm) (13mm)
3/8" SECTION 'A' SECTION 'B' SECTION 'C' SECTION

3/8" (10mm) AT TOP OF GROOVE. 1/2" (13mm) AT TOP OF GROOVE. 5/8" (16mm) AT TOP OF GROOVE. 7/8" (20mm) AT TOP OF GROOVE.
(USE 10A SERIES DRIVE BELTS) (USE 'A' OR 13A BELTS) ( USE 'B' OR 15A SERIES BELTS) (USE 'C' OR 20A SERIES BELTS)
NOTE: SANDEN 'C' SECTION TAKES
A, B OR C SECTION BELTS
BELT "RIDE"
TOLERANCE
GAP
POSITION OF PULLEY
V-BELT IN PULLEY DIAMETER
DIAMETER (CLUTCH
PULLEY (CLUTCH DIAMETER)
BELT RIDE AND TOLERANCE DIAMETER)
GAP ARE CRITICAL. V-BELTS
TEND TO PULL DOWN INTO
THE GROOVE UNDER TORQUE.
V-BELTS SHOULD NEVER TOUCH,
OR RUN IN , THE BOTTOM OF
THE PULLEY GROOVE.
CLUTCH MEASUREMENT CLUTCH MEASUREMENT POLY-RIB CLUTCHES

STANDARD A, B, AND C SECTION CLUTCHES POLY-RIB CLUTCHES ALL HAVE SIMILAR GROOVES;
A - SECTION: 1/2" (13mm) TOP GROOVE WIDTH ONLY THE NUMBER OF GROOVES VARIES.
B - SECTION: 5/8" (16mm) TOP GROOVE WIDTH POLY-RIB CLUTCHES ARE ALSO KNOWN AS POLY-GROOVE.
C - SECTION: 7/8" (19mm) TOP GROOVE WIDTH
Clutch Measurement: Mounting Distance
CLUTCH MOUNTING DISTANCE CLUTCH MOUNTING DISTANCE CLUTCH MOUNTING DISTANCE

(GAUGE-LINE) (GAUGE-LINE) (GAUGE-LINE)
YORK AND TECUMSEH SANDEN COMPRESSORS WITH SANDEN COMPRESSORS WITH
COMPRESSORS STANDARD CLUTCHES POLY-RIB CLUTCHES
NOTE: IT IS ESSENTIAL TO CHECK THE CLUTCH MOUNTING DISTANCE BEFORE SELECTING A SUITABLE CLUTCH AND/OR
COMPRESSOR. THIS IS PARTICULARLY CRITICAL WITH YORK AND TECUMSEH COMPRESSORS AS THERE ARE SO
MANY CLUTCH VARIATIONS AVAILABLE. SOME CLUTCHES OF THE SAME SECTION LOOK SIMILAR, BUT MAY HAVE
QUITE A DIFFERENT ALIGNMENT WHEN ACTUALLY MOUNTED TO THE COMPRESSOR. C
15
Highg
Clutches: Complete Assemblies
BOSCH
BOSCH CLUTCH IDENTIFICATION

REFER TO THE COMPRESSOR APPLICATION LIST SET OUT ON PAGES 46
TO 100, FIND THE CORRECT UNIT, THEN ASK OUR SALES DEPARTMENT
FOR THE CLUTCH TO SUIT.
DELCO (GM)
7" (178mm)
6" (147mm)
CL-15222
CL-15524
CL-15412
CL-10122 CL-10125 CL-14238

CL-15922
PART PULLEY O.D. VOLTS NEW/ COMPRESSOR APPLICATION AND OTHER INFORMATION
No. TYPE mm - ins RECON TYPE
CL-14238 2 x 3/8" 127 - 5" N-A RECON DELCO A6 SOME JAGUAR; SOME ROLLS ROYCE
CL-15222 1x A 127 - 5" N-A RECON DELCO A6 HOLDEN, COMMODORE, STATESMAN WITH HARRISON
CL-10122 6- V 140 - 5.5" 24v NEW DELCO A6 SOME OFF-ROAD MACHINERY
CL-15412 1x A 147 - 6" N-A RECON DELCO A6 JOHN DEERE
CL-15524 1x A 178 - 7" N-A RECON DELCO A6 CATERPILLAR
CL-10125 1x A 127 - 5" 12v NEW DELCO R4 CAMIRA, ROVER, VOLVO WITH R4 COMPRESSORS
CL-15922 1x A 127 - 5" N-A RECON DELCO R4 USE CL-10125
NOTES: 1. CLUTCH MEASUREMENTS ARE NOMINAL AND MAY VARY SLIGHTLY.
2. NEW CLUTCHES ARE COMPLETE WITH COIL; RECONDITIONED CLUTCHES DO NOT INCLUDE THE COIL.
DELPHI DIESEL-KIKI
CL-10131 CL-10133
Commodore VT, VX, VY 6 CYL. Commodore VT, VX 5.7L V8
(does not suit 5 litre V8)
PART PULLEY O.D. VOLTS COMPRESSOR PART PULLEY O.D. VOLTS COMPRESSOR
No. GROOVES (mm) MODEL No. GROOVES (mm) MODEL
CL-10131 6-V 146 mm 12 DELPHI V5 CL-10142 2 - A 132 12 DKS12; DKS15
CL-10133 4-V 146 mm 12 DELPHI V5
NOTE: FITS SPLINED SHAFT COMPRESSORS ONLY C
16
CLUTCHES Highgate
NIPPON - DENSO
New
CL-10194 CL-10200
A Section, 12 volt 143 mm A Section, 12 volt 137 mm
Universal, including: Hilux LN106, 130, 167 Universal, including:Landcruiser HZJ75, 79, 80
Reconditioned
TYPICAL TYPICAL
A-SECTION POLY-GROOVE
NIPPON DENSO CLUTCH IDENTIFICATION

REFER TO THE COMPRESSOR APPLICATION LIST SET OUT ON PAGES 46 to 100,
FIND THE CORRECT UNIT, THEN ASK OUR SALES DEPARTMENT FOR THE CLUTCH
TO SUIT.
PANASONIC / MATSUSHITA
PANASONIC CLUTCH IDENTIFICATION

REFER TO THE COMPRESSOR APPLICATION LIST SET OUT ON PAGES 46 to 100,
FIND THE CORRECT UNIT, THEN ASK OUR SALES DEPARTMENT FOR THE CLUTCH
TO SUIT.
SANDEN
SD505 and SD5H09 Series
'2A' - SECTION POLY-GROOVE

CL-10282 CL-10286
Diameter: 125 mm Diameter: 127 mm
Voltage 12 volt Section: 4 groove
Suits Models: 5022, 5072, 9056 Voltage 12 volt
Suits Models: 5029, 5075
C
17
Highg
SANDEN
SD507 Series

CL-10300 CL-10290
Suits Models: 5133, 9173 Voltage 12 volt
Suits Models: 5134, 9175, 9225
SANDEN
SD508, SD510, SD5H14
'2A' - SECTION 'B' - SECTION

CL-10315
Diameter: 132 mm
CL-10320
Voltage 12 volt Diameter: 152 mm
Suits Models: 6626, 8390, 9040 Voltage 12 volt
9103, 9104 Suits Models: 5460, 8385, 9112
CL-10350 CL-10366
Voltage: 24 volt Voltage: 24 volt
Suits Models: 5412, 8392, 9121
Suits Models: 5413, 8399, 9106,
9905

CL-10330 CL-10310
Suits Models: 8387, 9113 Voltage 12 volt
Suits Models: 9513
'C' - SECTION
(takes A, B or C section belt)
CL-10372
Diameter: 158 mm
Voltage 12 volt
Suits Models: 9119
CL-10384
Diameter: 158 mm
Voltage: 24 volt
Suits Models: 9122
C
18
CLUTCHES Highgate
SANDEN
SD7H13
NOTE: SD7H13 and SD7H15 compressors may have keyed or splined shafts. The following guide may be helpful:
Compressor models beginning with 7 (e.g. 7863) have keyed shafts.
Compressor models beginning with 8 (e.g. 8031) have splined shafts.
'2A' - SECTION '2A' - SECTION

CL-10543 CL-10545
Voltage 12 volt Voltage 12 volt
Splined Shaft Shaft Type: Splined Shaft Shaft Type: Keyed Shaft
Keyed Shaft
Suits Models: 8908 Suits Models: 7312
CL-10547
Diameter: 125 mm
Voltage: 24 volt
Shaft Type: Keyed Shaft
Suits Models: A904 (early)
POLY-GROOVE (10PV) POLY-GROOVE (10PV)

CL-10549 CL-10551
Keyed Shaft Diameter 120 mm Splined Shaft Diameter 120 mm
Section: 10 groove Section: 10 groove
Shaft Type: Keyed Shaft Shaft Type: Splined Shaft
SANDEN
SD7H15

With Rubber Damper
CL-10593
Diameter: 132 mm CL-10812
Voltage 12 volt Diameter: 132 mm
Shaft Type: Keyed Shaft Voltage 12 volt
Keyed Shaft Splined Shaft
Suits Models: 7863 Shaft Type: Splined Shaft
CL-10612
Diameter: 132 mm CL-10816
Voltage: 24 volt Diameter: 132 mm
Shaft Type: Keyed Shaft Voltage: 24 volt
Suits Models: 7888, 7933 Shaft Type: Splined Shaft
C
19
Highg
SANDEN
SD7H15 cont'd.
'2A' - SECTION 'B' - SECTION

CL-10801 CL-10640
Voltage 12 volt Voltage 12 volt
Shaft Type: Splined Shaft Shaft Type: Keyed Shaft
Splined Shaft Suits Models: 8038 Keyed Shaft Suits Models: 7979
CL-10830 CL-10651
Shaft Type: Splined Shaft Shaft Type: Keyed Shaft
'B' - SECTION 'C' - SECTION

With Rubber Damper CL-10676
Diameter: 153mm
CL-10847 Voltage 12 volt
Diameter: 146mm Shaft Type: Keyed Shaft
Voltage 12 volt Suits Models: 7950
Splined Shaft
Shaft Type: Splined Shaft Keyed Shaft
Suits Models: 8041 CL-10687
Diameter: 153mm
CL-10852 Voltage: 24 volt
Diameter: 146 mm Shaft Type: Keyed Shaft
Shaft Type: Splined Shaft Suits Models: 7947
Voltage: 24 volt
Suits Models: 8034
'C' - SECTION POLY-GROOVE (6PV)

With Rubber Damper
CL-10710
CL-10870 Diameter 119 mm
Diameter 153 mm Section: 6 groove
Splined Shaft Shaft Type: Splined shaft Keyed Shaft Shaft Type: Keyed Shaft
CL-10875
Diameter: 153 mm
Voltage: 24 volt
Shaft Type: Splined Shaft NOTE:
Suits Models: 8037 Pictured with rubber damper; standard shoe is supplied.
POLY-GROOVE (6PV)
CL-10893
Diameter: 119 mm
Section: 6 groove
Splined Shaft
Voltage: 12 volt
Shaft Type: Splined Shaft
Suits Models: 8032
C
20
CLUTCHES Highgate
SANDEN
SD7H15 cont'd.

With Rubber Damper CL-10739
CL-10925 Diameter 125 mm
Splined Shaft
Diameter: 125 mm Keyed Shaft Section: 10 groove
Section: 10 groove Voltage: 12 volt
Voltage: 12 volt Shaft Type: Keyed Shaft
Shaft Type: Splined Shaft Suits Models: 7931
Suits Models: 8035
NOTE: CL-10739 is pictured with rubber damper;

standard shoe is supplied
SANDEN
SDB705

CL-10979 CL-10984
Diameter: 96 mm Diameter 96 mm
Note: can use CL-10984
SANDEN
SD7B10

CL-11136 CL-11157
Diameter 100 mm Diameter: 112 mm
Suits Models: 7151 Suits Models: A925
C
21
Highg
SANDEN
TR70 Series TR90 Series

CL-10402 CL-10409
Diameter 96 mm Diameter 92 mm
Application: Commodore VK, VL Application: Falcon XF
SANDEN
TRS90 Series
CL-10445 CL-10450 CL-10452 CL-10454
'A' - SECTION
PART PULLEY O.D. VOLTS COMPRESSOR OTHER INFORMATION
No. TYPE (mm) SERIES - MODEL - PART No.
CL-10445 1 x A 115 12 TRS090 3001 CO-58670

CL-10450 1 x A 92 12 TRS090 3013 CO-58690
CL-10452 2 x A 115 12 TRS090 3012 CO-58715
CL-10454 2 x A 111 12 TRS090 3017 CO-58722
CL-10462 CL-10464, CL-10467 CL-10470 CL-10474
POLY-GROOVE
No. TYPE (mm) SERIES - MODEL - PART No.
CL-10462 5 groove 95 12 TRS090 3020 CO-58814

CL-10464 5 groove 100 12 TRS090 3015 CO-58782
CL-10465 5 groove 100 12 TRS090 3021 CO-58730 (USE CL-10464)
CL-10467 5 groove 100 12 TRS090 3011 CO-58810
CL-10470 5 groove 119 12 TRS090 3014 CO-58754
CL-10474 6 groove 112 12 TRS090 3016 CO-58825
C
22
CLUTCHES Highgate
SANDEN
TRF105, TRS105, TRV105 Series
'1A' - SECTION POLY-GROOVE (5PV)

CL-10424 CL-10410
Voltage: 12 volt Keyed Shaft Section: 5 groove
Suits Models: 2216, 2219, 3203 Voltage: 12 volt
Application: Commodore VN, VS V8 Shaft Type: Keyed Shaft (bolt type)
Suits Models: 2200
Application: Falcon EA 6 cyl.
Note: For models with splined shaft
use CL-10411

CL-10411 CL-10413
Shaft Type: Splined Shaft (nut type) Shaft Type: Splined Shaft
Suits Models: 2000 Suits Models: 3303, 3305
Splined Shaft Application: Falcon EA 6 cyl. Splined Shaft Application: Falcon EF, EL 6 cyl.
CL-10490
Diameter 95 mm
Section: 5 groove
Voltage: 12 volt
Shaft Type: Splined Shaft (nut type)
Suits Models: 3301
Application: Falcon EB, ED 6 cyl.

CL-10419 CL-10422
Splined Shaft
Diameter 103 mm Keyed Shaft Diameter 103mm
Shaft Type: Splined Shaft (nut type) Shaft Type: Keyed Shaft (bolt type)
Application: Commodore VN V6 Application: Commodore VN V6
Note: For models with keyed shaft Note: For models with splined shaft
use CL-10422 use CL-10419

CL-10426 CL-10500
Splined Shaft Voltage: 12 volt Splined Shaft Voltage: 12 volt
Shaft Type: Splined Shaft Shaft Type: Splined Shaft
Suits Models: 3202, 3207 Suits Models: 2212, 3304, 3550
Application: Commodore VR, VS V6 Application: Falcon EB, ED, EF, EL
V8
C
23
Highg
SEIKO - SEIKI
CL-11362 CL-11392
CL-11372

No. TYPE (mm) TYPE
CL-11362 2 x A 118 12 SEIKO 110, 140, 170, 99DS4, 121DS4 MOST WITH 118 mm A-SECTION CLUTCH
CL-11372 2 x A 135 12 SEIKO 110, 140, 170, 99DS4, 121DS4 MOST WITH 135 mm A-SECTION CLUTCH
CL-11392 10 - V 125 12 SEIKO 110, 140, 170, 99DS4, 121DS4 MOST WITH 125 mm POLY-RIB CLUTCH
TAMA
NOTE:
THE TAMA TM SERIES REPLACES THE DIESEL-KIKI / ZEXEL DKS SERIES.
TAMA TM SERIES CLUTCHES DO NOT INTERCHANGE WITH THE EARLIER
DIESEL-KIKI DKS SERIES.
PULLEY O.D. VOLTS COMPRESSOR OTHER INFORMATION

TYPE (mm) TYPE
2 x A 134 12 TM-13A, TM-14A FITS CO-21150 AND CO-21153 COMPRESSORS
NOTE: Tama clutches are available on request for most popular models. When ordering, please ensure that
all relevant vehicle, compressor and clutch details are given to enable us to procure the correct clutch.
UNICLA
DA299 UPS107, UPS109 UPS107, UPS109 UPS107, UPS109

2A Section, 134mm 2A Section, 125mm 10-V Section, 125mm 1A Section, 125mm
PULLEY O.D. VOLTS COMPRESSOR OTHER DETAILS AND INFORMATION
TYPE (mm) TYPE
2 x A 134 12 DA299 UPRIGHT SOME EARLY AFTERMARKET - NOW OSOLETE (NLA)
1x A 134 12 DA299 UPRIGHT SOME EARLY AFTERMARKET - NOW OSOLETE (NLA)
2 x A 125 12 UPS107, UPS109 STANDARD UNICLA UPS SERIES A-SECTION CLUTCH
10 - V 125 12 UPS107, UPS109 STANDARD UNICLA UPS SERIES POLYGROOVE CLUTCH
1 x A 125 12 UPS107, UPS109 UNICLA UPS SERIES A-SECTION OFF-SET CLUTCH
NOTE: ALL UNICLA UPS-107 AND UPS-109 CLUTCHES INTERCHANGE
NOTE: Unicla clutches are available on request for most popular models. When ordering, please ensure that
all relevant vehicle, compressor and clutch details are given to enable us to procure the correct clutch.
C
24
CLUTCHES Highgate
YORK - TECUMSEH
FORD VEHICLES
CL-16185 CL-16188 CL-16195
PART PULLEY O.D. VOLTS NEW - COMPRESSOR OTHER INFORMATION

No. TYPE mm - ins RECON TYPE
CL-16185 2 x 3/8" 152 - 6" N-A RECON YORK FALCON XD - XE 6 cyl with YORK
CL-16188 1x A 152 - 6" N-A RECON YORK FALCON XD - XE 8 cyl with YORK (standard clutch)
CL-16195 1x A 152 - 6" N-A RECON YORK FALCON XD - XE 8 cyl with YORK (flywheel clutch)
(CL-16195 is NLA; closest alternative is CL-16188)
OGURA
OGURA A-SECTION CLUTCH MOUNTING DISTANCE OGURA B-SECTION

(CL-11612 ILLUSTRATED) (GAUGE-LINE) (CL-11662 ILLUSTRATED)
YORK AND TECUMSEH
COMPRESSORS
PART PULLEY O.D. VOLTS MODEL MOUNTING OTHER INFORMATION/APPLICATION

No. TYPE mm - ins DISTANCE
CL-11612 2 x A 152 - 6" 12 OGURA - MA6A 43 mm THE OGURA CLUTCHES LISTED ARE USED
CL-11624 2 x A 152 - 6" 24 OGURA - MA6A 43 mm ON YORK AND TECUMSEH COMPRESSORS,
CL-11662 1 x B 152 - 6" 12 OGURA - MA6B 56 mm AND ON SOME OTHER UPRIGHT PISTON
CL-11664 1 x B 152 - 6" 24 OGURA - MA6B 56 mm
COMPRESSORS SUCH AS FEMSA.
CL-11712 2 x A 178 - 7" 12 OGURA - MA7A 43 mm
CL-11724 2 x A 178 - 7" 24 OGURA - MA7A 43 mm THEY FIT THE STANDARD AND HEAVY DUTY
CL-11762 1 x B 178 - 7" 12 OGURA - MA7B 56 mm YORK 206, 209, AND 210 MODELS, AND THE
CL-11764 1 x B 178 - 7" 24 OGURA - MA7B 56 mm TECUMSEH HG850, HG1000, AND HGB1000.
NOTES:
1. CLUTCH MEASUREMENTS ARE NOMINAL AND MAY VARY SLIGHTLY.
2. NEW CLUTCHES ARE COMPLETE WITH COIL; RECONDITIONED CLUTCHES MAY NOT INCLUDE THE COIL.
3. THERE ARE MANY VARIATIONS OF ENGINES AND ACCESSORIES ON TRUCKS AND OFF-ROAD EQUIPMENT,
AND THE LIST ABOVE SHOULD BE CONSIDERED AS A GUIDE ONLY. CHECK ALL DIMENSIONS, INCLUDING
MOUNTING DISTANCE (GAUGE-LINE) BEFORE ORDERING.
C
25
Highg
YORK - TECUMSEH
WARNER HEAVY DUTY
WARNER A section WARNER 2 x A section WARNER B section WARNER C section WARNER 5V section
(CL-13664 illustrated) (CL-13642 illustrated) (CL-13764 illustrated) (CL-13892 illustrated) (CL-13504 illustrated)
Part Pulley O.D. Volts Model Mounting Other Information / Vehicle Application
No. Type mm - ins No. Distance
CL-13502 5 - V 152 - 6" 12 POLYRIB 66 mm SOME OFF-ROAD WITH DETROIT AND TECUMSEH COMPRESSOR
CL-13504 5 - V 152 - 6" 24 POLYRIB 66 mm SOME OFF-ROAD WITH DETROIT AND TECUMSEH COMPRESSOR
CL-13582 1 x A 152 - 6" 12 1411-36 72 mm INTERNATIONAL - SOME PAYSTAR 5000 AND TRANSTAR WITH DETROIT
OR CUMMINS-N, S SERIES 1600-2600 WITH CUMMINS-N.
SOME SCOUT II; 5370 WITH NTC & PT270.
CL-13622 2 x A 152 - 6" 12 1411-39 43 mm KENWORTH K-SERIES (COE)* WITH CAT 1674 & 1694; W SERIES WITH
DETROIT 8V-71 & CAT 1674:
MACK - SOME WITH DETROIT 1968-1985
SOME WHITE ROAD COMMANDER AND 6000 WITH DETROIT 6-71
SOME INTERNATIONAL TRUCKS.
SOME CAT, CASE, INTER, MASSEY, NEW HOLLAND, STEIGER ,
VERSATILE AND WHITE OFF-ROAD EQUIPMENT.
CL-13632 2 x A 152 - 6" 12 1411-67 43 mm KENWORTH: SOME K-SERIES/DETROIT (COE)* SOME WITH CAT 3306.
CL-13642 2 x A 152 - 6" 12 1411-18 42 mm SOME CAT, CASE, INTER, MASSEY, NEW HOLLAND, STEIGER ,
VERSATILE AND WHITE OFF-ROAD EQUIPMENT.
CL-13664 1 x A 170 - 6.7" 24 1436-41 80 mm
CL-13692 1 x B 172 - 6.8" 12 1406-49 69 mm KENWORTH W SERIES - SOME WITH CUMMINS V903 & VT903
MACK F, R, U & DM - SOME WITH CUMMINS V903 & VT903
SOME INTERNATIONAL OFF-ROAD EQUIPMENT
CL-13732 2 x A 178 - 7" 12 1411-41 43 mm SOME CAT, CASE, INTER TRUCKS, MACK TRUCKS, MASSEY, NEW
HOLLAND, STEIGER ,VERSATILE AND WHITE OFF-ROAD.
CL-13762 1 x B 172 - 6.8" 12 1406-43 72 mm SOME MACK WITH CAT & N-SERIES; SOME VERSATILE
CL-13764 1 x B 172 - 6.8" 24 1436-52 72 mm
CL-13892 1 x C 172 - 6.8" 12 1411-61 72 mm MACK FL-FS WITH CUMMINS (W/OUT P/STRG): SOME MASSEY
CL-13922 1 x C 176 - 6.9" 12 1406-41 45 mm KENWORTH - SOME K-SERIES COE & W-SERIES WITH CUMMINS
MACK - SOME F SERIES WITH CUMMINS OR DETROIT;
SOME R,U,DM,W,RL & RS SERIES WITH CAT OR CUMMINS.
CL-13952 1 x C 178 - 7" 12 49 mm KENWORTH K332-25
* (COE): Cab Over Engine
NOTE:
THERE ARE MANY VARIATIONS OF ENGINES AND ACCESSORIES ON TRUCKS AND OFF-ROAD EQUIPMENT,
AND THE LIST ABOVE SHOULD BE CONSIDERED AS A GUIDE ONLY. CHECK ALL DIMENSIONS, INCLUDING
MOUNTING DISTANCE (GAUGE-LINE) BEFORE ORDERING.
C
26
CLUTCHES Highgate
COIL
RETAINING
BOLT
SNAP
CIRCLIPS
RINGS
BEARING
COIL
DUST
SEAL
RETAINING HUB OR SHOE PULLEY

BOLT AND (ARMATURE) (ROTOR)
WASHER
CLUTCH PARTS
QUICK - REFERENCE GUIDE
ITEM PAGE
BEARINGS .......................................................................................... 27 - 28
CIRCLIPS .......................................................................................... 28
COILS ............................................................................................... 29
DUST COVERS ..................................................................................... 30
PULLEYS ......................................................................................... 30
DUST SEAL KITS ................................................................................ 30
SHOES (HUBS) ................................................................................... 31
MISCELLANEOUS SPARES ............................................................ 31
C
27
Highg
Clutches: Replacement Parts
BEARINGS
➤
outer race
inner race
➤
Bearing Measurement
I.D. O.D.
➤
➤ width ➤
➤ width ➤
(outer race) (inner race)
Bearing Listing by Measurement

Part Outside Inside Width Other Information
No. Dia. (mm) Dia. (mm) (mm)
CLS-18853 47 30 18 / 21** Outer race: 18mm wide, Inner race: 21mm wide
CLS-18859 50 35 20
CLS-18800 52 30 22
CLS-18802 54 38 17
CLS-18870 55 30 13
CLS-18750 55 30 23
CLS-18798 55 32 23
CLS-18830 55 35 20
CLS-18974 56 40 24
CLS-18808 57 40 20 / 24 Outer race: 20mm wide, Inner race: 24mm wide
CLS-18892 62 30 16
CLS-18810 62 30 27
CLS-18780 62 40 20.5
CLS-18807 62 40 20.5 / 24 Outer race: 20.5mm wide, Inner race: 24mm wide
CLS-18848 62 40 24
CLS-18799 66 40 24
** Denotes internal race is notched
Bearing Listing - Numerical

Part Outside Inside Width Other Information
No. Dia. (mm) Dia. (mm) (mm)
CLS-18750 55 30 23
CLS-18780 62 40 20.5
CLS-18798 55 32 23
CLS-18799 66 40 24
CLS-18800 52 30 22
CLS-18802 54 38 17
CLS-18807 62 40 20.5 / 24 Outer race: 20.5mm wide, Inner race: 24mm wide
CLS-18808 57 40 20 / 24 Outer race: 20mm wide, Inner race: 24mm wide
CLS-18810 62 30 27
CLS-18830 55 35 20
CLS-18848 62 40 24
CLS-18859 50 35 20
CLS-18870 55 30 13
CLS-18892 62 30 16
CLS-18974 56 40 24
** Denotes internal race is notched
C
28
CLUTCHES Highgate
BEARINGS
Standard Clutch Bearing Notched Type Clutch Bearings

(CLS-18780 Illustrated) (CLS-18853 and CLS-18856 Illustrated)
COMPRESSOR DETAILS PART O.D. I.D. WIDTH

No. (mm) (mm) (mm)
BEHR / BOSCH BMW (MOST WITH BEHR COMPRESSORS) CLS-18750 55 30 23
CLARION ALL CPW140 MODELS CLS-18750 55 30 23
CLARION ALL CRW135 MODELS CLS-18830 55 35 20
DELCO ALL A6 AND R4 MODELS (REPLACES OE # 907257) CLS-18780 62 40 20.5
DELPHI COMMODORE VT, VX, VY CLS-18780 62 40 20.5
DIESEL KIKI ALL DKS-12 AND DKS-15 MODELS CLS-18830 55 35 20
HALLA FALCON AU, TRANSIT VG CLS-18750 55 30 23
HITACHI SOME ROTARY MJ123 (OE # C2314) CLS-18848 62 40 24
MATSUSHITA NL SERIES (SOME HONDA) CLS-18798 55 32 23
MITSUBISHI MAGNA TE, TF CLS-18799 66 40 24
NIPPON - DENSO MOST 6P & 10P MODELS CLS-18848 62 40 24
NIPPON - DENSO MOST 10PA MODELS CLS-18800 52 30 22
NIPPON - DENSO MOST 10P08E MODELS CLS-18802 54 38 17
NIPPON - DENSO TV12, TV14 MODELS CLS-18800 52 30 22
NIPPON - DENSO SOME CLS-18808 57 40 20/24
NIPPON - DENSO SOME 10P MODELS CLS-18807 62 40 20.5/24
PANASONIC LASER KF, KH MOST PANASONIC (MATSUSHITA) CLS-18750 55 30 23
SANDEN SD507 WITH 125mm CLUTCH, FALCON XE WITH SANDEN CLS-18848 62 40 24
SANDEN SD507 WITH LATE (GOLD CLUTCH) CLS-18830 55 35 20
SANDEN 508/510 H/DUTY SINGLE BEARING (REPLACES STD. TWIN BRGS.) CLS-18848 62 40 24
SANDEN SD709 R-12 MODELS CLS-18830 55 35 20
SANDEN SD7H13, SD7H15, SD7V16 SERIES CLS-18830 55 35 20
SANDEN SDB7 MODELS CLS-18859 50 35 20
SANDEN TR70 VL COMMODORE CLS-18853 47 30 18/21
SANDEN TR90 XF FALCON CLS-18856 55 30 23/26
SANDEN TRF105 EA - EL FALCON CLS-18859 50 35 20
SANDEN TRF105 VN - VS COMMODORE V6 CLS-18830 55 35 20
SANDEN TRS090 SERIES SANDEN MODELS: 3011, 3012, 3013, 3014, 3015 CLS-18859 50 35 20
3016, 3017, 3305, 9860
SANDEN TRS090 SERIES SANDEN MODELS: 3020 CLS-18830 55 35 20
SANDEN TRS105 SERIES SANDEN MODEL: 3212 CLS-18830 55 35 20
SEIKO-SEIKI ALL 110, 140 AND 170 SERIES WITH 125mm AND 135mm CLUTCH CLS-18848 62 40 24
SEIKO-SEIKI ALL 110, 140 AND 170 SERIES WITH 118mm CLUTCH CLS-18974 56 40 24
YORK FORD: 6 CYL WITH PITTS 2-GROOVE CLUTCH CLS-18750 55 30 23
YORK FORD: 6 CYL WITH PITTS 2-GROOVE CLUTCH, XE FALCON CLS-18892 62 30 16
YORK FORD: V8 WITH FLYWHEEL TYPE CLUTCH CLS-18750 55 30 23
YORK OGURA MA6A; MA6B EARLY (SET OF TWO) CLS-18870 55 30 13
YORK OGURA MA6A; MA6B 1990 ON (SINGLE BEARING) CLS-18750 55 30 23
YORK OGURA MA7A; MA7B CLS-18892 62 30 16
YORK PITTS HEAVY DUTY CLUTCH (MOST) CLS-18810 62 30 27
YORK WARNER 1411 SERIES CLS-18892 62 30 16
YORK WARNER 1436 SERIES CLS-18810 62 30 27
NOTE: CLUTCH BEARINGS ARE SUBJECT TO SEVERE DUST CONDITIONS AND ONLY BEARINGS WITH NITRILE DUST
SEALS ARE RECOMMENDED. ALL THE BEARINGS LISTED ABOVE HAVE NITRILE DUST SEALS.
CIRCLIPS
65 mm dia. 42 mm dia. 36 mm dia.
CLS-19240 CLS-19245 CLS-19262

BEARING RETAINING COIL RETAINING PULLEY RETAINING
CIRCLIP, DELCO A-6 CIRCLIP, DELCO A-6 CIRCLIP, DELCO A-6 C
29
Highg
COILS
STANDARD OFF-ROAD COIL

COIL WITH DUST SEAL
DELCO A6 12 VOLT COIL DELCO A6 24 VOLT COIL DELCO R4 12 VOLT COIL OGURA COIL
(NOTE SPADE TERMINALS) (NOTE BULLET TERMINALS) (EARLY TYPE) (MA SERIES CLUTCHES
FOR YORK AND TECUMSEH)
SANDEN COIL SANDEN COIL SANDEN COIL SANDEN COIL

SD5 SERIES CLUTCHES SD7 SERIES CLUTCHES ** SD7H-C SERIES CLUTCHES TR105 SERIES CLUTCHES
** SD7H-C SERIES COIL SUITS 8000 SERIES COMPRESSORS, AND WILL INTERCHANGE WITH B-SERIES, EXCEPT TWIN
WIRE COILS WHICH ARE C-SERIES ONLY.
Nippon Denso and many others are available - please contact our sales department
Part Compressor Clutch Coil Diameter Volts New - Other Information

No. Model dia. O.D. - I.D. Recon. and OE Part Numbers
CLS-19412 DELCO A-6 ALL SIZES 104 mm 60 mm 12 NEW SPADE TERMINALS. OE: 15-45
CLS-19424 DELCO A-6 ALL SIZES 104 mm 60 mm 24 NEW BULLET TERMINALS. OE: 15-4185
CLS-19512 DELCO A-6 ALL SIZES 104 mm 60 mm 12 RECON SPADE TERMINALS.
CLS-19524 DELCO A-6 ALL SIZES 104 mm 60 mm 24 RECON BULLET TERMINALS.
CLS-19612 DELCO R-4 (early) ALL 118 mm 74 mm 12 NEW
CLS-19642 DELCO R-4 (late) ALL 134 mm 93 mm 12 NEW SUITS CO-19834
CLS-19912 OGURA 152 mm 115 mm 67 mm 12 NEW FITS ALL MA6A, MA6B 12 VOLT
CLS-20502 SANDEN SD505 & 507 125 mm 95 mm 63 mm 12 NEW SANDEN 8543-6341
CLS-20512 SANDEN SD508; some 510 132 mm 103 mm 72 mm 12 NEW SANDEN 8517-6043
CLS-20524 SANDEN SD508; some 510 132 mm 103 mm 72 mm 24 NEW SANDEN 8527-6041
CLS-20612 SANDEN SD508 152 mm 116 mm 74 mm 12 NEW SANDEN 8518-6041
CLS-20630 SANDEN SD7H 132 mm 96 mm 64 mm 12 NEW SANDEN 0542-6040
CLS-20634 SANDEN SD7H 132 mm 96 mm 64 mm 24 NEW SANDEN 0525-6340
CLS-20636 SANDEN SD7H-C 132 mm 96 mm 64 mm 12 NEW SANDEN 0704-6240 twin-wire, bullet
CLS-20637 SANDEN SD7H-C 132 mm 96 mm 64 mm 24 NEW SANDEN 0798-6040 twin-wire, bullet
CLS-20638 SANDEN SD7H-C 140 mm 96 mm 64 mm 12 NEW SANDEN 0725-6040 twin-wire, spade
CLS-20642 SANDEN SD510 152 mm 116 mm 74 mm 12 NEW SANDEN 9304-6040 can use CLS-20612
CLS-20644 SANDEN SD510 152 mm 116 mm 74 mm 24 NEW SANDEN 9304-6340 can use CLS-20624
CLS-20660 SANDEN TR90 92 mm 108 mm 64 mm 12 NEW FALCON XF
CLS-20665 SANDEN TR105 103 mm 90 mm 63 mm 12 NEW SANDEN 9495 6140 VN C/DORE
CLS-20669 SANDEN TR105 95 mm 82 mm 57 mm 12 NEW SANDEN 9447 6140 EA FALCON
CLS-20671 SANDEN TRS105 95 mm 82 mm 57 mm 12 NEW FALCON EB - ED 6 CYL
CLS-20673 SANDEN TRS105 103 mm 90 mm 63 mm 12 NEW FALCON EB - EF V8
CLS-20675 SANDEN TRS105 95 mm 81 mm 58 mm 12 NEW FALCON EF 6 CYL
CLS-20684 SANDEN TRS105 103 mm 90 mm 63 mm 12 NEW COMMODORE VR-VS V6
(use CLS-20665)
CLS-20685 SANDEN TRS105 92 mm 108 mm 64 mm 12 NEW COMMODORE VR-VS V8
C
30
CLUTCHES Highgate
DUST COVERS
CLS-20740 CLS-20750 CLS-20755 CLS-20777 CLS-20794

CLUTCH DUST COVER CLUTCH DUST COVER CLUTCH DUST COVER CLUTCH DUST COVER CLUTCH DUST COVER
DELCO A-6 SANDEN SD5: 132mm SANDEN SD5: 152mm SANDEN SD7: 132mm SANDEN SD7HC:132mm
REPLACES OE 9956548 KEYED SHAFT SPLINED SHAFT
BOLT HOLES: 31mm SUITS CLS-24360
CENTRE TO CENTRE BOLT HOLES: 27mm
CENTRE TO CENTRE
NOTE: DUST COVERS CANNOT BE FITTED TO SANDEN RUBBER ARMATURES
PULLEYS
DELCO A-6 DELCO A-6

SINGLE GROOVE PULLEY DOUBLE GROOVE PULLEY
PART COMPRESSOR PULLEY PULLEY NEW - APPLICATION - OTHER INFORMATION

No. MODEL DIA. GROOVES RECON.
CLS-22003 DELCO A-6 127 mm (5") 2 x 3/8" RECON. TAKES 10A SERIES BELT
CLS-22004 DELCO A-6 127 mm (5") 1xA NEW. REPLACES DELCO 5914730
CLS-22005 DELCO A-6 127 mm (5") 1xA RECON.
CLS-22022 DELCO A-6 140 mm (5.5") 6-V NEW
CLS-22045 DELCO A-6 147 mm (5.7") 1xA NEW REPLACES DELCO 9956554
CLS-22060 DELCO A-6 147 mm (5.7") 1xA RECON.
CLS-22068 DELCO A-6 178 mm (6.87") 1xA NEW REPLACES DELCO 9956544
CLS-22070 DELCO A-6 178 mm (6.87") 1xA RECON.
DUST SEALS
CLS-22640 CLS-22645 CLS-22662 CLS-22680

DELCO CLUTCH BEARING DUST CLUTCH COIL DUST SEAL CLUTCH BEARING DUST SEAL CLUTCH DUST SEAL KIT
SEAL KIT. SUITS DELCO A-6 SUITS DELCO A-6 SANDEN SD7H ‘C’ SERIES YORK AND TECUMSEH
(REPLACES OE # 9956547, 15-2133) (REPLACES OE # 6556674)
C
31
Highg
SHOES (HUBS)
DELCO (GM)
DELCO STANDARD HUB (30mm) DELCO LONG HUB (42mm)

CLS-23750: NEW CLS-23846: NEW
CLS-23775: RECON CLS-23850: RECON
PART COMPRESSOR PULLEY NEW - OTHER INFORMATION

No. MODEL TYPE RECON.
CLS-23750 DELCO A-6 SINGLE GROOVE NEW FITS MOST A-6 SINGLE GROOVE CLUTCHES
CLS-23775 DELCO A-6 SINGLE GROOVE RECON. FITS MOST A-6 SINGLE GROOVE CLUTCHES
CLS-23846 DELCO A-6 DOUBLE GROOVE NEW. FITS MOST A-6 DOUBLE GROOVE CLUTCHES
CLS-23850 DELCO A-6 DOUBLE GROOVE RECON. FITS MOST A-6 DOUBLE GROOVE CLUTCHES
SANDEN
CLS-24300 CLS-24304 CLS-24355, CLS-24360 CLS-24362
PART COMPRESSOR SANDEN OTHER INFORMATION / OE REFERENCE

No. MODEL CODE
CLS-24300 TR90 A6W FORD FALCON XF OE: 9345-6032
CLS-24302 TRS105 (not illustrated) A8R FORD FALCON EA NUT TYPE OE: 0077-6030
CLS-24303 TRS105 (not illustrated) A7U FORD FALCON EA BOLT TYPE OE: 9447-6030
CLS-24304 TRS105 AAB FORD FALCON EF 6 CYL. OE: 0295-6030
CLS-24305 TRS105 (not illustrated) AAA FORD FALCON EB - ED 6 CYL. OE: 0294-6030
CLS-24306 TRS105 (not illustrated) A6F FORD FALCON EB - EF 8 CYL. OE: 0293-6030
CLS-24315 TRS105 (not illustrated) A3V HOLDEN COMMODORE VR - VS 6 CYL. OE: 9495-6330
CLS-24317 TRS105 (not illustrated) A8F HOLDEN COMMODORE VR - VS 8 CYL. OE: 9496-6030
CLS-24355 SD7H15 B SERIES A2Y KEYED SHAFT SPRING TYPE OE: 0501-6030
CLS-24360 SD7H15 C SERIES ABJ SPLINED SHAFT SPRING TYPE OE: 0726-6030
CLS-24362 SD7H15 C SERIES ABC SPLINED SHAFT RUBBER DAMPER TYPE OE: 0689-6030
MISCELLANEOUS
CLS-21500 CLS-24400
DELCO CLUTCH SHOE RETAINING NUT DELCO CLUTCH SHOE SPACER
SUITS DELCO A-6 SUITS DELCO A-6

CL CL CL CL Clut UT UT UT Utches Ches Ches Ches Ches: Quick - Reference Guide

Uploaded by

Copyright:

Available Formats

CL CL CL CL Clut UT UT UT Utches Ches Ches Ches Ches: Quick - Reference Guide

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CL CL CL CL Clut UT UT UT Utches Ches Ches Ches Ches: Quick - Reference Guide

Uploaded by

Copyright:

Available Formats

What are the different types of clutches discussed?

What are the different types of clutches discussed?

What information is provided about clutch measurement?

What information is provided about clutch measurement?

13

QUICK - REFERENCE GUIDE

ITEM DETAILS PAGE

Clutch Identification and Measurement

Clutch Identification / Measurement Guide 7/8"

3/8" SECTION 'A' SECTION 'B' SECTION 'C' SECTION

CLUTCH MEASUREMENT CLUTCH MEASUREMENT POLY-RIB CLUTCHES

Clutch Measurement: Mounting Distance

CLUTCH MOUNTING DISTANCE CLUTCH MOUNTING DISTANCE CLUTCH MOUNTING DISTANCE

BOSCH CLUTCH IDENTIFICATION

CL-10122 CL-10125 CL-14238

Clutches: Complete Assemblies

NIPPON DENSO CLUTCH IDENTIFICATION

PANASONIC CLUTCH IDENTIFICATION

'2A' - SECTION POLY-GROOVE

'2A' - SECTION POLY-GROOVE

SD508, SD510, SD5H14

'2A' - SECTION 'B' - SECTION

'2A' - SECTION POLY-GROOVE

Clutches: Complete Assemblies

'2A' - SECTION '2A' - SECTION

POLY-GROOVE (10PV) POLY-GROOVE (10PV)

'2A' - SECTION '2A' - SECTION

'2A' - SECTION 'B' - SECTION

'B' - SECTION 'C' - SECTION

'C' - SECTION POLY-GROOVE (6PV)

Clutches: Complete Assemblies

POLY-GROOVE (10PV) POLY-GROOVE (10PV)

NOTE: CL-10739 is pictured with rubber damper;

POLY-GROOVE (4PV) POLY-GROOVE (5PV)

POLY-GROOVE (4PV) POLY-GROOVE (6PV)

TR70 Series TR90 Series

'1A' - SECTION '1A' - SECTION

CL-10445 CL-10450 CL-10452 CL-10454

CL-10445 1 x A 115 12 TRS090 3001 CO-58670

CL-10462 CL-10464, CL-10467 CL-10470 CL-10474

CL-10462 5 groove 95 12 TRS090 3020 CO-58814

Clutches: Complete Assemblies

TRF105, TRS105, TRV105 Series

'1A' - SECTION POLY-GROOVE (5PV)

POLY-GROOVE (5PV) POLY-GROOVE (6PV)

POLY-GROOVE (6PV) POLY-GROOVE (6PV)

POLY-GROOVE (6PV) POLY-GROOVE (6PV)

PART PULLEY O.D. VOLTS COMPRESSOR OTHER INFORMATION

PULLEY O.D. VOLTS COMPRESSOR OTHER INFORMATION

DA299 UPS107, UPS109 UPS107, UPS109 UPS107, UPS109

NOTE: ALL UNICLA UPS-107 AND UPS-109 CLUTCHES INTERCHANGE

Clutches: Complete Assemblies

CL-16185 CL-16188 CL-16195

PART PULLEY O.D. VOLTS NEW - COMPRESSOR OTHER INFORMATION

OGURA A-SECTION CLUTCH MOUNTING DISTANCE OGURA B-SECTION

PART PULLEY O.D. VOLTS MODEL MOUNTING OTHER INFORMATION/APPLICATION

WARNER HEAVY DUTY

* (COE): Cab Over Engine