Slab Design

SLAB: S-1
Two adjacent edges

discontinuous:
Effective Length of longer
direction (ly) 4.465 m
effectiveLength of shorter
direction (lx) 4.450 m
LY/LX 1.003 Two way slab
Thickness of slab 175 mm

Material Properties
Concret (fck) 25.00 N/mm2
Steel (fY) 415.00 N/mm2
LOADS are
D.L 6.125 KN/m2
L.L 5 KN/m2
SIDL 3.6 KN/m2
SIDL 6.5 KN/m2
FACTORED TOTAL LOAD 36.6 KN/m2
BENDING MOMENT :
αx αy
(-) 0.047 0.047 ref:table 26

Cl-D-1.1 and
(+) 0.035 0.035 24.4.1
Mx αxWlx2
MY αxWlx2
Mu/bd^2
Mx(-) 34.07 KN.m 1.74
MY(-) 34.07 KN.m 1.74
Mx (+) 25.37 KN.m 1.29

My(+) 25.37 KN.m 1.29
REINFORCEMENT CALCULATIONS
Effective cover 30 mm
effective depth in x direction 140 mm
effective depth in y direction 140 mm
Reinforcement Details
Steel Provided Steel
Required Required % of Steel Spacing Provided % of Steel
Ast (mm2/m) Dia. Of Bar Spacing (mm) Required (mm) (mm2/m) Provided
Astx(-) 739.1 12 153 0.53 % 150 754.0 0.54
Asty(-) 739.1 12 153 0.53 % 150 754.0 0.54
Astx(+) 536.3 10 146 0.38 % 125 628.3 0.45
Asty(+) 536.3 10 146 0.38 % 125 628.3 0.45
Check for deflection
Modification factors as per IS 456-2000,ref:23.2 Lx/d (actual) Lx/d (Permissible)

α = 23 31.8 36.4
β = 1
γ = 1.58
δ = 1
% of compression steel = 0.00%
Safe in deflection
SLAB: S-2
One short edge discontinuous:


Material Properties
LOADS are
D.L 6.125 KN/m2
L.L 5 KN/m2
SIDL 3.6 KN/m2
SIDL 6.5 KN/m2
BENDING MOMENT :
αx αy
(-) 0.037 0.037 ref:table26
Cl-D-1.1 and
(+) 0.028 0.028 24.4.1
Mx αxWlx2
MY αxWlx2
Mu/bd^2
Mx(-) 27.00 KN.m 1.38
MY(-) 27.00 KN.m 1.38
Mx (+) 20.43 KN.m 1.04

My(+) 20.43 KN.m 1.04
effective defth in x direction 140 mm
effective defth in y direction 140 mm
Provided Steel % of
Required Required % of Steel Spacing Provided Steel
Ast (mm2/m) Dia. Of Bar Spacing (mm) Required (mm) (mm2/m) Provided
Astx(-) 573.5 10 137 0.41 % 125 628.3 0.45
Asty(-) 573.5 10 137 0.41 % 125 628.3 0.45
Astx(+) 426.0 10 184 0.30 % 175 448.8 0.32
Asty(+) 426.0 10 184 0.30 % 175 448.8 0.32

Lx/d
Modification factors as per IS 456-2000,ref:23.2 Lx/d (actual) (Permissible)
α = 26 31.9 42.0
β = 1
γ = 1.62
δ = 1.0
Safe in deflection
SLAB: S-3
One short edge
discontinuous:

Material Properties
LOADS are
D.L 5.5 KN/m2
L.L 5 KN/m2
SIDL 3.6 KN/m2
SIDL 6.5 KN/m2
BENDING MOMENT :
αx αy
(-) 0.0522 0.037 ref:table26
(+) 0.0396 0.028 Cl-D-1.1 and 24.4.1
Mx αxWlx2
MY αxWlx2
Mu/bd^2
Mx(-) 20.92 KN.m 1.58
MY(-) 14.83 KN.m 1.12
Mx (+) 15.87 KN.m 1.20

My(+) 11.22 KN.m 0.85
Required Provided Steel % of
Required Dia. Of Spacing % of Steel Spacing Provided Steel
Ast (mm2/m) Bar (mm) Required (mm) (mm2/m) Provided
Astx(-) 547.5 10 143 0.48 % 140 561.0 0.49
Asty(-) 378.0 10 208 0.33 % 200 392.7 0.34
Astx(+) 406.3 10 193 0.35 % 190 413.4 0.36
Asty(+) 281.9 10 279 0.25 % 200 392.7 0.34

Lx/d
α = 26 29.1 36.4
β = 1
γ = 1.4
δ = 1
Safe in deflection
SLAB: S-4
One long edge discontinuous:

direction (ly ) 4.715 m
direction (lx ) 4.450 m

Material Properties
Concret (fck ) 25.00 N/mm2
LOADS are
D.L 6.125 KN/m2
L.L 5 KN/m2
SIDL 3.6 KN/m2
SIDL 6.5 KN/m2
BENDING MOMENT :
αx αy
(-) 0.0412 0.037 ref:table26
(+) 0.031 0.028 Cl-D-1.1 and 24.4.1
Mx αxWlx2
MY αxWlx2
Mu/bd^2
Mx(-) 29.87 KN.m 1.52
MY(-) 26.82 KN.m 1.37
Mx (+) 22.47 KN.m 1.15

My(+) 20.30 KN.m 1.04

Astx(-) 639.7 12 177 0.46 % 175 646.3 0.46
Asty(-) 569.3 12 199 0.41 % 175 646.3 0.46
Astx(+) 471.1 10 167 0.34 % 150 523.6 0.37
Asty(+) 423.0 10 186 0.30 % 175 448.8 0.32
Lx/d
Modification factors as per IS 456-2000,ref:23.2 Lx/d (actual)(Permissible)
α = 23 31.8 37.0
β = 1
γ = 1.61
δ = 1
Safe in deflection
SLAB: S-5
Interior panel

Material Properties
LOADS are
D.L 5.5 KN/m2
L.L 5 KN/m2
SIDL 3.6 KN/m2
SIDL 6.5 KN/m2
BENDING MOMENT :
αx αy
(-) 0.035 0.032 ref:table26
(+) 0.0264 0.024 Cl-D-1.1 and 24.4.1
Mx αxWlx2
MY αxWlx2
Mu/bd2
Mx(-) 25.00 KN.m 1.89
MY(-) 22.85 KN.m 1.73
Mx (+) 18.86 KN.m 1.43

My(+) 17.14 KN.m 1.30
Reinforcement Details:
Astx(-) 666.5 10 118 0.58 % 100 785.4 0.68
Asty(-) 603.2 10 130 0.52 % 125 628.3 0.55
Astx(+) 488.8 10 161 0.43 % 125 628.3 0.55
Asty(+) 441.1 10 178 0.38 % 175 448.8 0.39
Check for deflection:
Lx/d
α = 26 38.8 39.0
β = 1
γ = 1.5
δ = 1
Safe in deflection
SLAB: S-6
Interior panel
EffectiveLength of shorter

Material Properties
LOADS are
D.L 5.5 KN/m2
L.L 5 KN/m2
SIDL 3.6 KN/m2
SIDL 6.5 KN/m2
BENDING MOMENT :
αx αy
(-) 0.051 0.032 ref:table26
(+) 0.039 0.024 Cl-D-1.1 and 24.4.1
Mx αxWlx2
MY αxWlx2
Mu/bd2
Mx(-) 20.44 KN.m 1.55
MY(-) 12.83 KN.m 0.97
Mx (+) 15.63 KN.m 1.18

My(+) 9.62 KN.m 0.73
Astx(-) 533.7 10 147 0.46 % 140 561.0 0.49
Asty(-) 324.3 10 242 0.28 % 200 392.7 0.34
Astx(+) 399.8 10 196 0.35 % 190 413.4 0.36
Asty(+) 240.1 10 327 0.21 % 200 392.7 0.34
Lx/d
α = 26 29.1 36.4
β = 1
γ = 1.4
δ = 1
Safe in deflection
SLAB: S-7
Interior panel

Material Properties
LOADS are
D.L 5.5 KN/m2
L.L 5 KN/m2
SIDL 3.6 KN/m2
SIDL 2.5 KN/m2
BENDING MOMENT :
αx αy
(-) 0.043 0.032 ref:table26
(+) 0.032 0.024 Cl-D-1.1 and 24.4.1
Mx αxWlx2
MY αxWlx2
Mu/bd2
Mx(-) 13.39 KN.m 1.01
MY(-) 9.96 KN.m 0.75
Mx (+) 9.96 KN.m 0.75

My(+) 7.47 KN.m 0.56
% of Provided Steel % of
Required Dia. Of Required Steel Spacing Provided Steel
Ast (mm2/m) Bar Spacing (mm) Required (mm) (mm2/m) Provided
Astx(-) 339.2 10 232 0.29 % 200 392.7 0.34
Asty(-) 249.0 10 315 0.22 % 200 392.7 0.34
Astx(+) 249.0 10 315 0.22 % 200 392.7 0.34
Asty(+) 185.0 10 425 0.16 % 200 392.7 0.34
Lx/d
(Permissi
Modification factors as per IS 456-2000,ref:23.2 Lx/d (actual) ble)
α = 26 29.1 45.3
β = 1
γ = 1.743
δ = 1
Safe in deflection
SLAB: S-8
One long edge discontinuous


Material Properties
LOADS are
D.L 5.5 KN/m2
L.L 5 KN/m2
SIDL 3.6 KN/m2
SIDL 2.5 KN/m2
BENDING MOMENT :
αx αy
(-) 0.052 0.037 ref:table26
(+) 0.039 0.028 Cl-D-1.1 and 24.4.1
Mx αxWlx2
MY αxWlx2
Mu/bd2
Mx(-) 16.75 KN.m 1.27
MY(-) 11.92 KN.m 0.90
Mx (+) 12.56 KN.m 0.95

My(+) 9.02 KN.m 0.68
% of Provided Steel % of
Required Dia. Of Required Steel Spacing Provided Steel
Astx(-) 430.4 10 182 0.37 % 180 436.3 0.38
Asty(-) 300.2 10 262 0.26 % 200 392.7 0.34
Astx(+) 317.3 10 248 0.28 % 200 392.7 0.34
Asty(+) 224.6 10 350 0.20 % 200 392.7 0.34

Lx/d
(Permissi
α = 23 29.6 40.1
β = 1
γ = 1.743
δ = 1
Safe in deflection
TYPICAL SLAB DESIGN FOR TYPE 2 RESIDENCIAL QUARTER
One long edge discontinuous:


Material Properties
LOADS are
D.L 4.7 KN/m2
L.L 3 KN/m2
SIDL 0.3125 KN/m2
SILL 0 KN/m2
BENDING MOMENT :
αx αy
(-) 0.053 0.032 ref:table26 IS 456:2000
(+) 0.041 0.024 Cl-D-1.1 and 24.4.1
Mx αxWlx2
MY αxWlx2
Mu/bd2
Mx(-) 5.94 KN.m 0.41
MY(-) 3.59 KN.m 0.25
Mx (+) 4.59 KN.m 0.32

My(+) 2.69 KN.m 0.22
Astx(-) 139.8 10 562 0.12 % 150 523.6 0.44
Asty(-) 83.8 10 938 0.07 % 150 523.6 0.44
Astx(+) 107.7 10 729 0.09 % 150 523.6 0.44
Asty(+) 68.5 10 1147 0.06 % 150 523.6 0.44
Modification factors as per IS 456-2000,ref:23.2 Lx/d (actual) Lx/d (Permissible)

α = 32 24.8 39.2
β = 1
γ = 1.225168
δ = 1
Safe in deflection
SLAB: S-10
Interior panel

Material Properties
LOADS are
D.L 5.5 KN/m2
L.L 5 KN/m2
SIDL 3.6 KN/m2
SIDL 2.5 KN/m2
BENDING MOMENT :
αx αy
(-) 0.043 0.032 ref:table26
(+) 0.032 0.024 Cl-D-1.1 and 24.4.1
Mx αxWlx2
MY αxWlx2
Mu/bd2
Mx(-) 14.12 KN.m 1.07
MY(-) 10.51 KN.m 0.79
Mx (+) 10.51 KN.m 0.79

My(+) 7.88 KN.m 0.60
Astx(-) 358.8 10 219 0.31 % 200 392.7 0.34
Asty(-) 263.2 10 298 0.23 % 200 392.7 0.34
Astx(+) 263.2 10 298 0.23 % 200 392.7 0.34
Asty(+) 195.4 10 402 0.17 % 200 392.7 0.34
Lx/d
α = 26 29.9 45.3
β = 1
γ = 1.74
δ = 1
Safe in deflection
SLAB: S-11
Interior panel

Material Properties
Concret (fck) 25 N/mm2
Steel (fY) 415 N/mm2
LOADS are
D.L 5.5 KN/m2
L.L 5 KN/m2
SIDL 3.6 KN/m2
SIDL 2.5 KN/m2
BENDING MOMENT :
αx αy
(-) 0.043 0.032 ref:table26
(+) 0.032 0.024 Cl-D-1.1 and 24.4.1
Mx αxWlx2
MY αxWlx2
Mu/bd2
Mx(-) 18.34 KN.m 1.39
MY(-) 13.65 KN.m 1.03
Mx (+) 13.65 KN.m 1.03

My(+) 10.24 KN.m 0.77
Astx(-) 474.4 10 166 0.41 % 160 490.9 0.43
Asty(-) 346.1 10 227 0.30 % 200 392.7 0.34
Astx(+) 346.1 10 227 0.30 % 200 392.7 0.34
Asty(+) 256.1 10 307 0.22 % 200 392.7 0.34
Lx/d
α = 26 34.0 40.1
β = 1
γ = 1.54
δ = 1
Safe in deflection
SLAB: S-12


Material Properties
LOADS are
D.L 5.5 KN/m2
L.L 5 KN/m2
SIDL 3.6 KN/m2
SIDL 2.5 KN/m2
BENDING MOMENT :
αx αy
(-) 0.0452 0.037 ref:table26
(+) 0.0354 0.028 Cl-D-1.1 and 24.4.1
Mx αxWlx2
MY αxWlx2
Mu/bd2
Mx(-) 19.28 KN.m 1.46
MY(-) 15.78 KN.m 1.19
Mx (+) 15.10 KN.m 1.14

My(+) 11.94 KN.m 0.90
Provided Steel % of
Required Dia. Of Required % of Steel Spacing Provided Steel
Astx(-) 500.7 10 157 0.44 % 155 506.7 0.44
Asty(-) 403.8 10 195 0.35 % 190 413.4 0.36
Astx(+) 385.2 10 204 0.33 % 200 392.7 0.34
Asty(+) 300.8 10 261 0.26 % 200 392.7 0.34
Lx/d
(Permissi
α = 23 34.0 34.8
β = 1
γ = 1.52
δ = 1
Safe in deflection
SLAB: S-13


Material Properties
LOADS are
D.L 5.5 KN/m2
L.L 5 KN/m2
SIDL 3.6 KN/m2
SIDL 2.5 KN/m2
BENDING MOMENT :
αx αy
(-) 0.077 0.037 ref:table26
(+) 0.059 0.028 Cl-D-1.1 and 24.4.1
Mx αxWlx2
MY αxWlx2
Mu/bd2
Mx(-) 10.92 KN.m 0.83
MY(-) 5.25 KN.m 0.40
Mx (+) 8.37 KN.m 0.63

My(+) 3.97 KN.m 0.30
Provided Steel % of
Astx(-) 273.9 10 287 0.24 % 200 392.7 0.34
Asty(-) 128.8 10 610 0.11 % 200 392.7 0.34
Astx(+) 207.8 10 378 0.18 % 200 392.7 0.34
Asty(+) 97.0 10 809 0.08 % 200 392.7 0.34
Lx/d
(Permissi
α = 23 19.6 34.8
β = 1
γ = 1.52
δ = 1
Safe in deflection
SLAB: S-14


Material Properties
LOADS are
D.L 5.5 KN/m2
L.L 5 KN/m2
SIDL 3.6 KN/m2
SIDL 2.5 KN/m2
BENDING MOMENT :
αx αy
(-) 0.0742 0.037 ref:table26
(+) 0.0567 0.028 Cl-D-1.1 and 24.4.1
Mx αxWlx2
MY αxWlx2
Mu/bd2
Mx(-) 14.58 KN.m 1.10
MY(-) 7.27 KN.m 0.55
Mx (+) 11.14 KN.m 0.84

My(+) 5.50 KN.m 0.42
Provided Steel % of
Astx(-) 371.2 10 212 0.32 % 200 392.7 0.34
Asty(-) 179.9 10 437 0.16 % 200 392.7 0.34
Astx(+) 279.8 10 281 0.24 % 200 392.7 0.34
Asty(+) 135.2 10 581 0.12 % 200 392.7 0.34
Lx/d
α = 23 23.1 46.0
β = 1
γ = 2.00
δ = 1
Safe in deflection
SLAB: S-15
Interior panel:

Material Properties
Concret (fck) 25.00 N/mm 2
Steel (fY) 415.00 N/mm 2
LOADS are
D.L 6.125 KN/m2
L.L 5 KN/m2
SIDL 3.6 KN/m2
SIDL 6.5 KN/m2
BENDING MOMENT :
αx αy
(-) 0.037 0.032 ref:table26
(+) 0.028 0.024 Cl-D-1.1 and 24.4.1
Mx αxWlx2
MY αxWlx2
Mu/bd^2
Mx(-) 26.82 KN.m 1.37
MY(-) 23.20 KN.m 1.18
Mx (+) 20.30 KN.m 1.04

My(+) 17.40 KN.m 0.89
Astx(-) 569.3 10 138 0.41 % 125 628.3 0.45
Asty(-) 487.3 10 161 0.35 % 150 523.6 0.37
Astx(+) 423.0 10 186 0.30 % 175 448.8 0.32
Asty(+) 359.7 10 218 0.26 % 200 392.7 0.28

Lx/d
α = 23 31.8 37.4
β = 1
γ = 1.63
δ = 1
Safe in deflection

Slab Design

Uploaded by

Copyright:

Available Formats

Slab Design

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Slab Design

Uploaded by

Copyright:

Available Formats

SLAB: S-1

Two adjacent edges

Thickness of slab 175 mm

(-) 0.047 0.047 ref:table 26

Mx (+) 25.37 KN.m 1.29

Check for deflection

Modification factors as per IS 456-2000,ref:23.2 Lx/d (actual) Lx/d (Permissible)

One short edge discontinuous:

LY/LX 1.00 Two way slab

Thickness of slab 175 mm

Mx (+) 20.43 KN.m 1.04

Check for deflection

LY/LX 1.33 Two way slab

Thickness of slab 150 mm

Mx (+) 15.87 KN.m 1.20

Check for deflection

One long edge discontinuous:

LY/LX 1.06 Two way slab

Thickness of slab 175 mm

Mx (+) 22.47 KN.m 1.15

Required Provided Steel % of

Check for deflection

LY/LX 1.06 Two way slab

Thickness of slab 150 mm

Mx (+) 18.86 KN.m 1.43

Check for deflection:

LY/LX 1.41 Two way slab

Thickness of slab 150 mm

Mx (+) 15.63 KN.m 1.18

Check for deflection

LY/LX 1.17 Two way slab

Thickness of slab 150 mm

Mx (+) 9.96 KN.m 0.75

Check for deflection

One long edge discontinuous

LY/LX 1.15 Two way slab

Thickness of slab 150 mm

Mx (+) 12.56 KN.m 0.95

Check for deflection

One long edge discontinuous:

LY/LX 1.51 Two way slab

Thickness of slab 150 mm

Mx (+) 4.59 KN.m 0.32

Check for deflection

Modification factors as per IS 456-2000,ref:23.2 Lx/d (actual) Lx/d (Permissible)

LY/LX 1.14 Two way slab

Thickness of slab 150 mm

Mx (+) 10.51 KN.m 0.79

Check for deflection

LY/LX 1.14 Two way slab

Thickness of slab 150 mm

Mx (+) 13.65 KN.m 1.03

Check for deflection

One long edge discontinuous

LY/LX 1.14 Two way slab

Thickness of slab 150 mm

Mx (+) 15.10 KN.m 1.14

Check for deflection

One long edge discontinuous