Dozers Waste Handlers: DKA91050WH Page 1

2 4 7 – 3 3 5 N E T H O R S E P O W E R
J DOZERSHANDLERS
WASTE
950J | 1050J
Vertis QCA
DKA91050WH Page 1 1300 19th Street, Suite 200
East Moline, IL 61244
Cyan Magenta Yellow Black
Purpose built.
950J
247 net hp
9.4- or 21.8 cu.-yd. blade
58,462-lb. typical operating weight
When Deere engineers set out to design the ulti- But power and nimble performance are just the
mate waste handlers, they couldn’t have picked beginning of the John Deere story. To make
better platforms. With their full-featured hydro- them the best possible landfill dozers, Deere
static drivetrains, the 950J and 1050J Waste engineers went right to the source — solid waste
Handlers deliver automatic power management, managers — to think through the solutions a
infinite ground speeds, power turns, and all kinds purpose-built waste handler can provide. To see
of hydrostatically driven productivity advantages. how we applied what we learned, turn the page.
PAGES
2–3
Vertis QCA
1300 19th Street, Suite 200
DKA91050WH Page 2 DKA
1050J
335 net hp
11.6-, 15.3-, 25.8-, or 32.8 cu.-yd. blades
80,967-lb. typical operating weight
e
e
Rugged and reliable J-Series John Deere’s full-featured Cooling system enhancements Available rear counterweight
e are powerful performers, hydrostatic drivetrains such as wide-fin cooler “doghouse” provides conven-
designed and purpose-built deliver production-boosting cores and hydraulic fans with ient storage and is an ideal
e
with extensive input from solid- advantages you don’t get automatic reversers help location for fire-suppression
a waste professionals like you. with other crawlers. beat the heat, for maximum system components.
uptime and productivity.
e
e.
Vertis QCA
age 2 DKA91050WH Page 3 1300 19th Street, Suite 200
Five-fin-per-inch engine and charge-air Quarter-turn latches on the hinged front grille Hydraulically driven variable-speed suction fans
coolers let dust and debris easily pass through allow quick and easy access for maintenance operate only as needed, reducing noise, fuel con-
the cores. For more efficient cooling and and cleaning. sumption, component wear, and operating costs.
easier clean-out.
Increases your uptime

while keeping its cool.
If you can’t take the heat, stay out of the landfill. We heard that loud and clear. So go ahead and put them
through their paces — the J-Series Waste Handlers have what it takes to keep their cool in a hostile world.
PAGES
4–5
Vertis QCA
fans
el con-
costs.
Three-millimeter perforations Variable-speed engine/ No stacked coolers in these Suction-type fans

in the hood and side shields charge-air- and hydraulic/ crawlers. Radiators and automatically reverse every
act as a “first filter,” preventing hydrostatic-cooler fans run engine charge-air coolers 30 minutes to blow away
entry of most airborne debris. only as needed, reducing are mounted side-by-side, so refuse and help prevent
noise, fuel consumption, they’re easier to clean. plugging. They can also be
cooling component wear, manually activated from the
and operating costs. seat as needed.
Vertis QCA
Relentless.
Traditional oval under-

carriage has only one
wear-causing forward-travel
flex point. Compared to the
three found on elevated
sprocket undercarriages,
which do you think will last
longer?
Heavy-duty ten-light package Cab waste barrier prevents Comprehensive hose-guard Dual-stage pre-cleaner Turbocharged diesels
includes four mounted on the refuse from the tracks system and internal routing and under-hood filter deliver impressive power
lift cylinders to help illuminate from accumulating in the keep hydraulic hoses out of help prolong engine life. at a low rpm for enhanced
the way. Lights are guarded powertrain. harm’s way. Generous ground Alternator incorporates a longevity and optimum fuel
to minimize damage. Cab is clearance and smooth belly hood-mounted fresh-air economy. Wet-type cylinder
pre-wired for a beacon. guards resist catching and pre-cleaner to help keep out liners dissipate heat for
carrying waste. airborne abrasives. reduced ring wear and oil
breakdown.
Vertis QCA
Optional front and/or rear
striker bars shed material
You won’t have operators standing by with a from the tracks and help
prevent trash buildup around
John Deere waste handler. We sweat the de- the idlers. Trapezoidal track
pad cutouts and recessed
tails to make these crawlers’ bulletproof design sprocket segments resist
undercarriage packing.
waste proof as well. If something’s susceptible
to damage, we’ve sealed, moved, re-routed, or
re-engineered it — all in the name of uptime.
Fuel-tank guard and heavy-
duty hinged bottom guards
minimize damage. In addition,
heavy-duty reinforcement
bars on the grille, engine side
shields, and hydraulic/hydro-
static-cooler cover protect vital
components.
Turbocharger and exhaust-

manifold thermal shield
keeps these high-heat
engine components under
wraps to reduce fire hazards.
You know the cost of final-drive repairs. John Deere’s unique design offers
wer unsurpassed protection. Bolt-on seal guards provide the first defense.
A. Final-drive seal guard
nced A B. Outer seal
fuel Debris that gets past this point encounters an oil-filled double seal outside C C. Inner seal
inder the final drive. If debris penetrates the first seal, oil escapes, setting off B
r a visual warning within the cab, alerting the operator to shut down the
B
oil machine. The second seal maintains oil in the final drives. It’s an early C
warning system that can help avoid downtime and expense. A
PAGES
6–7
Vertis QCA
Sight gauges provide
Replaceable half-shell quick daily checks of hy-
bearings within the dozer draulic/transmission and
push beams provide final-drive fluids. Monitor
longer component life and signals an alert should
simplified replacement. these levels drop.
Convenient test ports, in- Optional fast-fuel and

line fluid-sampling ports, engine/splitter box oil-
and diagnostic monitor evacuation systems
keep maintenance and help speed and simplify
operating costs to a periodic servicing for
minimum. increased uptime.
No need to disconnect
cooling system or hydrau-
lic hoses when tilting the
cab. Built-in jack provides
quick and easy service
access to drivetrain
components. Simplifies
clean-out, too.
Big dozer, minimal

maintenance.
Your maintenance crew won’t have to crawl all over these crawlers to maintain them. Like all Deere
equipment, daily and periodic service points are conveniently grouped, with many behind hinged side
shields that open wide, simplifying fluid and filter checks for increased uptime.
PAGES
8–9
Vertis QCA
All daily engine-service Conveniently displayed TMC system provides
checks are accomplished periodic lubrication and detailed diagnostic readings
on the right side. Extended maintenance charts help with easy-to-understand
maintenance intervals let ensure that nothing is messages for quick, easy
you go longer between overlooked. troubleshooting without
scheduled service. special tools.
Vertis QCA
Major production.
These purpose-built waste handlers have every- and clutch/brake or differential steering systems,
thing they need for maximum uptime, minimum other dozers just don’t deliver the same operating
maintenance, and unsurpassed performance. The ease. But hydrostatic drive isn’t the only thing
J-Series’ hydrostatic-drive system goes beyond that enables the 950J and 1050J to exceed the
the limits of other dozers, delivering infinite speed others. Their traditional oval undercarriage design
control, power management, and full power turns. also incorporates several features that help them
With conventional torque-converter transmission deliver long life and a smooth, productive ride.
PAGES
10–11
Vertis QCA
DKA91050WH Page 10 DKA9
Electronic monitor and gauges (including hydraulic/transmission oil
temperature gauge) keep a vigilant watch on vital functions. Issues both
visual and audible warnings.
Spacious and quiet air-conditioned cab provides unsurpassed all-round

visibility and daylong comfort. Insulated HVAC ducting and AC compressor
lines significantly improve cooling efficiency.
Just set maximum desired Infinitely variable track Hydraulic tilt and available Pilot-operated single lever Available extreme-service
ground speed and power control lets an operator blade pitch help keep the gives intuitive, low-effort pre-cleaner filters incom-
management does the speed up or slow power to load in front of the blade. control of steering, forward/ ing air, helping make the
rest. As loads change, each track — for smooth, Optional trash rack does reverse travel, and ground sealed and pressurized cab
the drivetrain automati- full power turns of any its job without sacrificing speed. One-hundred even more operator friendly.
cally powers up or down to radius. Unlike dozers with visibility. percent of available power
maintain peak engine rpm differential steering, tight is always applied, regard-
and efficiency. Travel speed turns are possible at any less of the selected speed
in either direction can also travel speed. range, for top productivity
be limited, to maximize all the time.
undercarriage life.
Vertis QCA
ge 10 DKA91050WH Page 11 1300 19th Street, Suite 200
DKA91050WH_SPECS 4/11/07 10:12 AM Page 12
Specifications
Engine 950J WH
Manufacturer and Model . . . . . . . . . . . . . . . . . . . . . . . . . . Liebherr D 936-L A6
Non-Road Emission Standards . . . . . . . . . . . . . . . . . . . . . certified to EPA Tier 3 emissions
Cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . in-line 6
Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 641 cu. in. (10.5 L)
Net Power (ISO9249). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247 hp (184 kW) @ 1,600 rpm
Net Peak Torque (ISO9249) . . . . . . . . . . . . . . . . . . . . . . . . 937 lb.-ft. (1270 Nm) @ 1,400 rpm
Aspiration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . intercooled and turbocharged diesel; engine air dual-stage precleaner with debris screen; alternator air prescreener
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pressure system with full-flow spin-on filter and integrated oil-to-water cooler
Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . dual stage dry type with safety element and aspirated precleaner, with in-cab restriction indicator
Cold-Starting Aid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . intake-mounted air-inlet heater
Slope Operation (maximum angle) . . . . . . . . . . . . . . . . . . 45 deg.
Cooling
Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . suction-type cooling fan, front mounted, thermostatically controlled; hydrostatically driven with automatic reverser set on
timer every 30 minutes (run time 30 seconds) and manual switch; perforated engine side shields and heavy-duty front grille
with tilt hose protection
Engine Radiator and Charge Air Cooler . . . . . . . . . . . . . . . 5 fins per in.
Engine Coolant Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . –34 deg. F (–37 deg. C)
Hydraulic/Transmission Cooling. . . . . . . . . . . . . . . . . . . . . oil-to-air heat exchanger with hydrostatically driven, thermostatically controlled cooling fan with auto fan reversing system
Hydrostatic Cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 fins per in.
Powertrain
Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . automatic dual-path, hydrostatic drive; load-sensing feature automatically adjusts speed and power to match changing
load conditions; each individual track is powered by a variable-displacement pump and motor combination; speed-in-
grip with fingertip speed control; infinite speed control; decelerator pedal controls ground speed to stop; dealer selectable
transmission operating parameters; transmission diagnostic test ports
Maximum Speeds (forward and reverse). . . . . . . . . . . 6.8 mph (11 km/h)
Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . single-lever steering, direction control, and counterrotation; full power turns and infinitely variable track speeds provide
unlimited maneuverability and optimum control
Final Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . double-reduction planetary final drives mounted independent of track frame and dozer push frame for isolation from
shock loads; the hydraulic drive motors are mounted to the mainframe; final drives are double sealed with electronic
seal-integrity indicator; bolt-on final-drive seal guards
Drawbar Pull. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82,055 lb. (365 kN) @ .09 mph (1.5 km/h)
Service Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . hydrostatic (dynamic) braking stops the machine whenever the direction/steering control lever is moved to neutral or
whenever the combined decelerator/brake pedal is fully depressed
Parking Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . exclusive park brake feature engages wet, multiple-disc brakes whenever the engine stops, the combined decelerator/
brake pedal is fully depressed, the park lock lever is placed in the park position, the emergency travel stop button is
depressed on the dash, the F-N-R control is in the neutral position for more than 7 seconds, or machine motion is sensed
with F-N-R in neutral position; machine cannot be driven with brake applied, reducing wear-out or need for adjustment
Hydraulics
Load-sensing proportional pump-flow control, variable-displacement axial-piston pump
Pump Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 gpm (258 L/min.) @ 1,600 rpm
System Relief Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,770 psi (26 000 kPa)
Filter, Return Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 micron with 5-micron bypass filter
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . single joystick lever
Electrical
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 volt
Number of Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Battery Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,000 CCA
Alternator Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 amp
Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 total: cab mounted 6 (4 front and 2 rear) and 4 lift cylinder; and 2 rear reflectors
PAGES
12–13
Vertis QCA
DKA91050WH Page 12 D
Undercarriage 950J WH
Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . track frame with front and rear track guides and sprocket guard; features deep-heat-treated, sealed, and lubricated track
links and through-hardened, sealed, and lubricated rollers for maximum wear resistance; extreme-duty shoes for severe
applications
Track Gauge (standard) . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ft. 6 in. (1981 mm)
Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . sealed and lubricated
Track/Carrier Rollers (each side) . . . . . . . . . . . . . . . . . . . . 7/2
Track Chain Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.5 in. (216 mm)
Sprocket Segments (each side). . . . . . . . . . . . . . . . . . . . . 5
Shoes (each side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Ground Contact Area
22-in. (560 mm) Grouser Width . . . . . . . . . . . . . . . . . 5,194 sq. in. (33 510 cm2)
Track Length on Ground . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ft. 10 in. (2992 mm)
Oscillation at Front Idler . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6 in. (141 mm)
Ground Pressure (with blade)
22 in. (560 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.9 psi (75 kPa)
24 in. (610 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.0 psi (69 kPa)
r 26 in. (660 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.3 psi (64 kPa)
Serviceability
Integral bottom protection; engine and mid-frame reinforced guards; hinged bottom access covers; hydraulic hose “O”-ring face seal connectors
Sight Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . hydraulic reservoir, final-drive dual-cone seal, and radiator
Refill Capacities*
set on Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 gal. (535 L)
t grille Cooling System with Recovery Tank . . . . . . . . . . . . . . 16.4 gal. (62 L)
Splitter Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 gal. (5.6 L)
Engine Oil with Filter. . . . . . . . . . . . . . . . . . . . . . . . . . 11.4 gal. (43 L)
Final Drive (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 gal. (19.5 L)
ystem Hydraulic/Transmission Reservoir and Filter . . . . . . . . 50 gal. (189 L)
*Please follow drain and refill procedures and volumes listed in the operator’s manual.
ging Operating Weights

n- Includes Waste-Handling Package, 24-in. (610 mm)
ctable Extreme-Service Shoes With Trapezoidal Holes,
and Semi-U Blade with Trash Rack . . . . . . . . . . . . . . . 58,462 lb. (26 518 kg)
Tractor Shipping Weight Includes Coolant, Lubricants,
vide 20% Fuel, and Standard Track Pads (without
blade or attachments). . . . . . . . . . . . . . . . . . . . . . . . . 49,351 lb. (22 385 kg)
m Optional Components
c Extreme-Service Grousers With Trapezoidal Holes
22 in. (560 mm) . . . . . . . . . . . . . . . . . . . . . . . . . – 401 lb. (– 182 kg)
24 in. (610 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . in base
or 26 in. (660 mm . . . . . . . . . . . . . . . . . . . . . . . . . . 209 lb. (95 kg)
Auxiliary Hydraulic Controls and Plumbing for
tor/ Rear Attachments
s Dual-Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . 278 lb. (126 kg)
ensed Single-Function . . . . . . . . . . . . . . . . . . . . . . . . . . 150 lb. (68 kg)
ment Blade Liner for Semi-U Blade . . . . . . . . . . . . . . . . . . . 937 lb. (425 kg)
Extended Rigid Drawbar . . . . . . . . . . . . . . . . . . . . . . . 804 lb. (365 kg)
Powered Cab Air Precleaner System* . . . . . . . . . . . . . 249 lb. (113 kg)
Push Plate
Semi-U Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . 569 lb. (258 kg)
Straight Blade. . . . . . . . . . . . . . . . . . . . . . . . . . . . 472 lb. (214 kg)
Rear Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . 7,055 lb. (3200 kg)
With Storage Compartment . . . . . . . . . . . . . . . . . 6,120 lb. (2776 kg)
Striker Bars
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 511 lb. (232 kg)
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 lb. (73 kg)
Trash Rack for Semi-U Blade . . . . . . . . . . . . . . . . . . . 683 lb. (310 kg)
Wear Plates for Push Beams. . . . . . . . . . . . . . . . . . . . 436 lb. (198 kg)
*Note: Adds 12 in. (296 mm) to overall tractor height.
Vertis QCA
2 DKA91050WH Page 13 1300 19th Street, Suite 200
I
D
L C
J M
F
B
E K
H
Machine Dimensions (with straight blade) 950J WH

A Overall Height Over Cab* . . . . . . . . . . . . . . . . . . . . . . . 11 ft. 3 in. (3.43 m)
B Overall Length (without blade) . . . . . . . . . . . . . . . . . . . 15 ft. 3 in. (4.66 m)
C Height of Grousers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 in. (71.5 mm)
D Ground Clearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 in. (545 mm)
E Total Width Over Blade-Mounting Trunnions . . . . . . . . . 9 ft. 10 in. (3.00 m)
F Overall Width
22-in. (560 mm) Shoes . . . . . . . . . . . . . . . . . . . . . . . . 8 ft. 4 in. (2.54 m)
24-in. (610 mm) Shoes . . . . . . . . . . . . . . . . . . . . . . . . 8 ft. 6 in. (2.59 m)
26-in. (660 mm) Shoes . . . . . . . . . . . . . . . . . . . . . . . . 8 ft. 8 in. (2.64 m)
*NOTE: Illustration shows optional cab-roof-mounted cab air precleaner system. Overall height does NOT include this option. With powered cab air precleaner system add 12 in. (296 mm).
Blade Specs
without trash rack with trash rack
Semi-U Blade Weight with Standard Cutting Edges
and Cupped End Bits without Spill Guard . . . . . . . . . . 4,835 lb. (2193 kg) 5,518 lb. (2503 kg)
Weight of Push Beams and Tilt Cylinders
With Mechanical Pitch Adjustment . . . . . . . . . . . . . . . 3,594 lb. (1630 kg) 3,594 lb. (1630 kg)
With Power Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4,023 lb. (1825 kg) 4,023 lb. (1825 kg)
SAE Capacity (semi-U) . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.4 cu. yd. (7.19 m3) 21.8 cu. yd. (16.65 m3)
G Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ft. 11 in. (1.5 m) 7 ft. 8 in. (2.3 m)
H Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ft. 1 in. (3.69 m) 12 ft. 1 in. (3.69 m)
I Lifting Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ft. 0 in. (1.22 m) 4 ft. 0 in. (1.22 m)
J Blade Digging Depth. . . . . . . . . . . . . . . . . . . . . . . . . . . 20 in. (511 mm) 20 in. (511 mm)
K Maximum Blade Pitch Adjustment . . . . . . . . . . . . . . . . 10 deg. 10 deg.
L Maximum Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 in. (930 mm) 37 in. (930 mm)
M Overall Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 ft. 10 in. (6.05 m) 19 ft. 10 in. (6.05 m)
PAGES
14–15
Vertis QCA
R
A
Q
S
N
P
P1
Rear Ripper 950J WH

3-shank parallelogram ripper with hydraulic pitch adjustment and 2 hole shank positions
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7,286 lb. (3305 kg)
N Ripping Depth
Maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 in. (749 mm)
Minimum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 in. (449 mm)
O Lifting Height
Maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 in. (755 mm)
Minimum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 in. (459 mm)
P Overall Length (attachment raised) . . . . . . . . . . . . . . . 5 ft. 2 in. (1.6 m)
mm). P' Overall Length (attachment lowered) . . . . . . . . . . . . . 6 ft. 4 in. (1.9 m)
Q Toolbar Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ft. 2 in. (2.2 m)
R Distance Between Teeth . . . . . . . . . . . . . . . . . . . . . . . 3 ft. 3 in. (1.0 m)
S Maximum Pitch Adjustment . . . . . . . . . . . . . . . . . . . . 25 deg.
Vertis QCA
Specifications
Engine 1050J WH
Manufacturer and Model . . . . . . . . . . . . . . . . . . . . . . . . . . Liebherr D 946-L A6
Non-Road Emission Standards . . . . . . . . . . . . . . . . . . . . . certified to EPA Tier 3 emissions
Cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . in-line 6
Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 732 cu. in. (12.0 L)
Net Power (ISO9249). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335 hp (250 kW) @ 1,800 rpm
Net Peak Torque (ISO9249) . . . . . . . . . . . . . . . . . . . . . . . . 1,254 lb.-ft. (1700 Nm) @ 1,400 rpm
Aspiration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . intercooled and turbocharged diesel; engine air dual-stage precleaner with debris screen; alternator air prescreener
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pressure system with full-flow spin-on filter and integrated oil-to-water cooler
Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . dual-stage dry type with safety element and aspirated precleaner, with dash-mounted restriction indicator
Cold-Starting Aid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . intake-mounted air-inlet heater
Slope Operation (maximum angle) . . . . . . . . . . . . . . . . . . 45 deg.
Cooling
Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . suction-type cooling fan, front mounted, thermostatically controlled; hydrostatically driven with automatic reverser set on
timer every 30 minutes (run time 30 seconds) and manual switch; perforated engine side shields and heavy-duty front grille
Engine Radiator and Charge Air Cooler . . . . . . . . . . . . . . . 5 fins per in.
Engine Coolant Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . –34 deg. F (–37 deg. C)
Hydraulic/Transmission Cooling. . . . . . . . . . . . . . . . . . . . . oil-to-air heat exchanger with hydrostatically driven, thermostatically controlled cooling fan with auto fan reversing system
Hydrostatic Cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 fins per in.
Powertrain
Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . automatic dual-path, hydrostatic drive; load-sensing feature automatically adjusts speed and power to match changing
load conditions; each individual track is powered by a variable-displacement pump and motor combination; speed-in-grip
with fingertip speed control; infinite speed control; decelerator pedal controls ground speed to stop; dealer selectable
transmission operating parameters; transmission diagnostic test ports
Maximum Speeds (forward and reverse). . . . . . . . . . . 6.8 mph (11 km/h)
Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . single-lever steering, direction control, and counterrotation; full power turns and infinitely variable track speeds provide
unlimited maneuverability and optimum control
Final Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . double-reduction planetary final drives mounted independent of track frame and dozer push frame for isolation from
shock loads; the hydraulic drive motors are mounted to the mainframe; final drives are double sealed with electronic
seal-integrity indicator; bolt-on final-drive seal guards
Drawbar Pull. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116,901 lb. (520 kN) @ .09 mph (1.5 km/h)
Service Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . hydrostatic (dynamic) braking stops the machine whenever the direction/steering control lever is moved to neutral or
whenever the combined decelerator/brake pedal is fully depressed
Parking Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . exclusive park brake feature engages wet, multiple-disc brakes whenever the engine stops, the combined decelerator/
brake pedal is fully depressed, the park lock lever is placed in the park position, the emergency travel stop button is
depressed on the dash, the F-N-R control is in the neutral position for more than 7 seconds, or machine motion is sensed
with F-N-R in neutral position; machine cannot be driven with brake applied, reducing wear-out or need for adjustment
Hydraulics
Load-sensing proportional pump-flow control, variable-displacement axial-piston pump
Pump Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 gpm (258 L/min.) @ 1,600 rpm
System Relief Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,700 psi (26 000 kPa)
Filter, Return Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 microns with 5-micron bypass filter
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . single joystick lever
Electrical
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 volt
Number of Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Battery Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,000 CCA
Alternator Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 amp
Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 total: cab mounted 6 (4 front and 2 rear) and 4 lift cylinder; and 2 rear reflectors
PAGES
16–17
Vertis QCA
Undercarriage 1050J WH
Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . track frame with front and rear track guides and sprocket guard; features deep-heat-treated, sealed, and lubricated track
links and through-hardened, sealed, and lubricated rollers for maximum wear resistance; extreme-duty shoes for severe
applications
Track Gauge (standard) . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ft. 2 in. (2180 mm)
Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . sealed and lubricated
Track/Carrier Rollers (each side) . . . . . . . . . . . . . . . . . . . . 7/2
Track Chain Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.5 in. (216 mm)
Sprocket Segments (each side). . . . . . . . . . . . . . . . . . . . . 5
Shoes (each side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Track Length on Ground . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ft. 5 in. (3175 mm)
Oscillation at Front Idler . . . . . . . . . . . . . . . . . . . . . . . . . . 13 in. (330 mm)
Ground Contact Area
semi-U dozer blade with power tilt U blade with power tilt and
Ground Pressure (with blade) . . . . . . . . . . . . . . . . . . . . . and mechanical pitch adjustment mechanical pitch adjustment
24 in. (610 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.8 psi (95 kPa) 14.0 psi (97 kPa)
r 26 in. (660 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.8 psi (88 kPa) 13.1 psi (90 kPa)
28 in. (710 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.0 psi (83 kPa) 12.2 psi (84 kPa)
Serviceability
Sight Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . hydraulic reservoir, final-drive dual-cone seal, and radiator
Refill Capacities*
set on Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171.7 gal. (650 L)
t grille Cooling System with Recovery Tank . . . . . . . . . . . . . . 15.1 gal. (57 L)
Splitter Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 gal. (6 L)
Engine Oil with Filter. . . . . . . . . . . . . . . . . . . . . . . . . . 9.0 gal. (34 L)
ystem Final Drive (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9 gal. (19 L)
Hydraulic/Transmission Reservoir and Filter . . . . . . . . 55.5 gal. (210 L)
*Please follow drain and refill procedures and volumes listed in the operator’s manual.
ging Operating Weights

n-grip SAE Operating Weight Includes Standard Equipment,
le Semi-U Blade with Trash Rack, 24-in. (610 mm)
Extreme-Service Shoes with Trapezoidal Holes,
Full Fuel Tank, and 175-lb. (79 kg) Operator . . . . . . . . 80,967 lb. (36 726 kg)
vide Optional Components
Extreme-Service Shoes With Trapezoidal Holes
m 24 in. (610 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . in base
c 26 in. (660 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . 520 lb. (236 kg)
28 in. (710 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . 1,049 lb. (476 kg)
Auxiliary Dual-Function Hydraulic Controls and
or Plumbing for Rear Attachments . . . . . . . . . . . . . . 313 lb. (142 kg)
Blade Liner for Semi-U Blade . . . . . . . . . . . . . . . . . . . 1,311 lb. (595 kg)
tor/ Pin Puller (hydraulic). . . . . . . . . . . . . . . . . . . . . . . . . . 130 lb. (59 kg)
s Powered Cab Air Precleaner System* . . . . . . . . . . . . . 249 lb. (113 kg)
ensed Push Plate for Semi-U Blade. . . . . . . . . . . . . . . . . . . . 798 lb. (362 kg)
ment Rear Counterweight
With Drawbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8,772 lb. (3979 kg)
With Storage Compartment . . . . . . . . . . . . . . . . . 7,714 lb. (3499 kg)
Trash Rack
For Semi-U Blade . . . . . . . . . . . . . . . . . . . . . . . . . 1,104 lb. (501 kg)
For U-Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,184 lb. (537 kg)
Wear Plates for Push Beams. . . . . . . . . . . . . . . . . . . . 752 lb. (341 kg)
*Note: Adds 12 in. (296 mm) to overall tractor height.
Vertis QCA
I
D
L C
J M
F
B
E K
H
Machine Dimensions 1050J WH

A Overall Height Over Cab* . . . . . . . . . . . . . . . . . . . . . . . 11 ft. 11 in. (3.63 m)
B Overall Length (without blade) . . . . . . . . . . . . . . . . . . . 16 ft. 0 in. (4.88 m)
C Height of Grousers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 in. (84 mm)
D Ground Clearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 in. (635 mm)
E Total Width Over Blade-Mounting Trunnions . . . . . . . . . 10 ft. 4 in. (3.15 m)
F Overall Width
24-in. (610 mm) Extreme-Duty Single-Bar
Grouser Shoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ft. 2 in. (2.79 m)
*NOTE: Illustration shows optional cab-roof-mounted cab air precleaner system. Overall height does NOT include this option. With powered cab air precleaner system add 12 in. (296 mm).
Blade Specs (with push beams, cupped end bits, and tilt cylinders)
semi-U dozer blade U dozer blade
semi-U dozer blade with trash rack U dozer blade with trash rack
Weight
With Mechanical Pitch Adjustment . . . . . . . . . . . . . . . 13,318 lb. (6041 kg) 14,420 lb. (6541 kg) 14,908 lb. (6762 kg) 16,092 lb. (7299 kg)
With Power Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13,567 lb. (6154 kg) 14,670 lb. (6654 kg) 15,157 lb. (6875 kg) 16,341 lb. (7412 kg)
With Standard Cutting Edges . . . . . . . . . . . . . . . . . . . 7,033 lb. (3190 kg) 8,135 lb. (3690 kg) 8,622 lb. (3911 kg) 9,806 lb. (4448 kg)
SAE Capacity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.6 cu. yd. (8.92 m3) 25.8 cu. yd. (19.79 m3) 15.3 cu. yd. (11.8 m3) 32.8 cu. yd. (25.05 m3)
G Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ft. 5 in. (1.7 m) 7 ft. 10 in. (2.4 m) 5 ft. 5 in. (1.7 m) 7 ft. 10 in. (2.4 m)
H Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 ft. 3 in. (4.03 m) 13 ft. 3 in. (4.03 m) 14 ft. 2 in. (4.3 m) 14 ft. 2 in. (4.3 m)
I Lifting Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ft. 7 in. (1.4 m) 4 ft. 7 in. (1.4 m) 4 ft. 7 in. (1.4 m) 4 ft. 7 in. (1.4 m)
J Blade Digging Depth. . . . . . . . . . . . . . . . . . . . . . . . . . . 22 in. (570 mm) 22 in. (570 mm) 22 in. (570 mm) 22 in. (570 mm)
K Maximum Blade Pitch Adjustment . . . . . . . . . . . . . . . . 10 deg. 10 deg. 10 deg. 10 deg.
L Maximum Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ft. 5 in. (1043 mm) 3 ft. 5 in. (1043 mm) 3 ft. 5 in. (1043 mm) 3 ft. 5 in. (1043 mm)
M Overall Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 ft. 4 in. (6.5 m) 21 ft. 4 in. (6.5 m) 22 ft. 8 in. (6.9 m) 22 ft. 8 in. (6.9 m)
PAGES
18–19
Vertis QCA
A
Q
S N
1050J WASTE HANDLER WITH SINGLE-SHANK REAR RIPPER
P
P1
Rear Ripper 1050J

Parallelogram ripper with hydraulic pitch adjustment
multi-shank (3) with
single-shank (3-hole height hydraulic pitch (2-hole height
adjustment in each shank) adjustment in each shank)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7,974 lb. (3617 kg) 10,509 lb. (4767 kg)
N Ripping Depth
Maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ft. 11 in. (1201 mm) 2 ft. 7 in. (791 mm)
Minimum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 in. (421 mm) 19 in. (476 mm)
O Lifting Height
Maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ft. 5 in. (1040 mm) 3 ft. 3 in. (985 mm)
Minimum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 in. (260 mm) 19 in. (476 mm)
P Overall Length (attachment raised) . . . . . . . . . . . . . . . 6 ft. 0 in. (1.8 m) 6 ft. 0 in. (1.8 m)
mm). P' Overall Length (attachment lowered) . . . . . . . . . . . . . 7 ft. 9 in. (2.4 m) 7 ft. 9 in. (2.4 m)
Q Toolbar Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ft. 4 in. (1.3 m) 8 ft. 0 in. (2.4 m)
R Distance Between Teeth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ft. 7 in. (1.1 m)
S Maximum Pitch Adjustment . . . . . . . . . . . . . . . . . . . . 31 deg. 31 deg.
m 3)
S
N
1050J WASTE HANDLER WITH MULTI-SHANK REAR RIPPER
P
P1
Vertis QCA
950J / 1050J WASTE HANDLERS

Key: ● Standard equipment ▲ Optional equipment *See your John Deere dealer for further information.
Base Landfill Base Landfill

Machine Package Engine Machine Package Undercarriage (continued)
● ● Certified to EPA Tier 3 emissions ● ● Half-shell push-beam bearings
● ● Spin-on vertical oil filter with anti-drainback valve ● ● Integrated track-frame cover
● ● Fuel system includes precleaner with water separator Operator’s Station
▲ ● Alternator air prescreener ● ● Modular-design ROPS/FOPS isolation-mounted cab with left
● ● Oil-to-water engine oil cooler and right access
▲ ● Thermal shield for turbocharger and exhaust manifold ● ● Heater (35,000 Btu) and air conditioning (28,000 Btu)
● ● Electronic engine throttle control ● ● Pressurized and filtered ventilation with 3-speed blower
● ● Key start switch with electric shutoff ● ● Left and rear sliding windows
● ● Intake-mounted air-inlet heater ● ● Dome light
Cooling ● ● Rubber floor mats
▲ ● Hydraulically driven fans for engine and hydraulic cooling ● ● Slip-resistant steps
systems with automatic reverser on timer and manual switch ● ● Air-suspension fabric seat
● ● Radiator and charge air cooler rated 5 fins per in. ● ● Adjustable armrests, backrest, height, weight, and fore-aft
● ● Radiator and charge air cooler side-by-side design ● ● 2-in. (50 mm) seat belt with retractor
● ● Transmission cooler with hydraulically driven cooling fan ● ● Radio ready
● ● Transmission cooler rated 5 fins per in. ● ● 12-volt/10-amp power port
● Perforated and corrugated side-shield opening ● ● Cup holder
Powertrain ● ● Interior-mounted rearview mirror
● ● Infinitely variable speed to match ground speed to load ▲ ● Hydraulic oil temperature gauge
● ● Integral final-drive seal protection with in-cab warning before Landfill Guarding
failure ▲ ● Bottom tank guards
▲ ● Bolt-on final-drive seal guards ● Protection bars on side covers
● ● Diagnostic test ports ● Protection bars for engine side doors
Hydraulics ● Belly pan sealing
● ● Two-function hydraulics ● Seal between cab and mainframe
● ● 10/5-micron dual-stage filter element ▲ ● Trunnion guard for tilt-cylinder hoses
● ● Hydraulic/transmission oil reservoir with service shutoff ▲ Striker bars
● ● O-ring seal connectors ▲ Blade trash rack
● ● Diagnostic test ports Overall Vehicle
Electrical ● ● One-piece unitized mainframe
● ● Positive-terminal battery covers ● ● On-board cab-tilt system
● ● Master disconnect ● ● Rear retrieval hitch
● ● Electrically activated battery ● ● Rear attachment mounting points integral to mainframe
● Pre-wired for beacon ● ● Sight gauges for hydraulic, transmission, and final-drive
Undercarriage seal fluids
● ● Oscillating track frames
▲ ▲ Counterweight with storage compartment
▲ ▲ Segmented sprockets
▲ ▲ Hydraulic blade pitch available
● ● Heavy-duty sealed and lubricated track chain
▲ ▲ JDLinkTM
CONTROL OWNING AND OPERATING COSTS

Customer Personal Service (CPS) is part of John Deere’s proactive, fix-before-fail strat- Preventive Maintenance (PM) agreements – give you a fixed cost for maintain-
egy on machine maintenance that will help control costs, increase profits, and reduce ing a machine for a given period of time. They also help you avoid downtime by ensur-
stress. Included in this comprehensive lineup of ongoing programs and services are: ing that critical maintenance work gets done right and on schedule. On-site preventive
Fluid analysis program – tells you what’s going on inside all of your machine’s maintenance service performed where and when you need it helps protect you from
major components so you’ll know if there’s a problem before you see a decline in per- the expense of catastrophic failures and lets you avoid waste-disposal hassles.
formance. Fluid analysis is included in most extended coverage and preventive-main- Extended coverage – gives you a fixed cost for machine repairs for a given period
tenance agreements. of time so you can effectively manage costs. Whether you work in a severe-service
Component life-cycle data – gives you vital information on the projected life span setting or just want to spread the risk of doing business, this is a great way to custom-
of components and lets you make informed decisions on machine maintenance by telling fit coverage for your operation. And an extended coverage contract also travels well
you approximately how many hours of use you can expect from an engine, transmission, because it’s backed by John Deere and is honored by all Deere construction dealers.
or hydraulic pump. This information can be used to preempt catastrophic downtime by Customer Support Advisors (CSAs) – Deere believes the CSA program lends a
servicing major components at about 80 percent of their life cycle. personal quality to Customer Personal Service (CPS). Certified CSAs have the knowledge
and skills for helping make important decisions on machine maintenance and repair.
Their mission is to help you implement a plan that’s right for your business and take
the burden of machine maintenance off your shoulders.
Net engine power is with standard equipment including air cleaner, Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE standards.
exhaust system, alternator, and cooling fan at test conditions Except where otherwise noted, these specifications are based on units with standard equipment, modular ROPS/cabs, full fuel tanks,
specified per ISO9249. No derating is required up to 10,000-ft. and 175-lb. (79 kg) operators.
(3050 m) altitude.
DKA91050WH Litho in U.S.A. (07-04)
Vertis QCA
DKA91050WH Page 20

Dozers Waste Handlers: DKA91050WH Page 1

Uploaded by

Copyright:

Available Formats

Dozers Waste Handlers: DKA91050WH Page 1

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dozers Waste Handlers: DKA91050WH Page 1

Uploaded by

Copyright:

Available Formats

2 4 7 – 3 3 5 N E T H O R S E P O W E R

Increases your uptime

Three-millimeter perforations Variable-speed engine/ No stacked coolers in these Suction-type fans

Traditional oval under-

Turbocharger and exhaust-

Convenient test ports, in- Optional fast-fuel and

Big dozer, minimal

Spacious and quiet air-conditioned cab provides unsurpassed all-round

ging Operating Weights

Machine Dimensions (with straight blade) 950J WH

Rear Ripper 950J WH

ging Operating Weights

Machine Dimensions 1050J WH

Rear Ripper 1050J

950J / 1050J WASTE HANDLERS

Base Landfill Base Landfill

CONTROL OWNING AND OPERATING COSTS

DKA91050WH Litho in U.S.A. (07-04)

You might also like