Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 29 views

    Testing Method

    Uploaded by

    rahul
    The document outlines various ASTM testing methods for composites including compression, tensile, flexural, torsion, and shear tests. It provides the ASTM test designation, recommended specimen shape and size for each test. Specimen shapes are generally uniform rectangular cross sections. Size ranges provided for compression and tensile tests, while flexural tests specify standard sizes but allow for alternatives.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Testing Method

    Uploaded by

    rahul
    29 views1 page
    The document outlines various ASTM testing methods for composites including compression, tensile, flexural, torsion, and shear tests. It provides the ASTM test designation, recommended specimen shape and size for each test. Specimen shapes are generally uniform rectangular cross sections. Size ranges provided for compression and tensile tests, while flexural tests specify standard sizes but allow for alternatives.

    Original Description:

    test

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document outlines various ASTM testing methods for composites including compression, tensile, flexural, torsion, and shear tests. It provides the ASTM test designation, recommended specimen shape and size for each test. Specimen shapes are generally uniform rectangular cross sections. Size ranges provided for compression and tensile tests, while flexural tests specify standard sizes but allow for alternatives.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    29 views1 page

    Testing Method

    Uploaded by

    rahul
    The document outlines various ASTM testing methods for composites including compression, tensile, flexural, torsion, and shear tests. It provides the ASTM test designation, recommended specimen shape and size for each test. Specimen shapes are generally uniform rectangular cross sections. Size ranges provided for compression and tensile tests, while flexural tests specify standard sizes but allow for alternatives.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 1

    Testing Method ASTM(American Specimen Shape Specimen Size

    Standard Testing
    Methods)
    Compression of Composites ASTM D3410 uniform 140 mm to155 mm (5.5 in to 6
    rectangular in) long. The recommended
    cross section width can be 12 mm (0.5 in) or
    25 mm (1 in). A variety of
    thicknesses can be
    accommodated.
    Tensile Testing Composite ASTM D3039 uniform 25 mm (1 in) wide and 250 mm
    rectangular (10 mm) long. Optional tabs can
    cross section be bonded to the ends of the
    specimen to prevent gripping
    damage.
    ASTM D7264 a bar of Standard specimen thickness is
    Flexural rectangular 4 mm (0.16 in), standard
    cross section specimen width is 13 mm (0.5
    Properties of supported on a in) and standard specimen
    beam and length is 20% longer than the
    Composites deflected at a support span. If the standard
    constant rate specimen is not available,
    alternative specimen sizes may
    be used.
    Thin Walled Tube in Torsion ASTM
    D5448/D5448M-
    93.
    Shear Test ASTM D5379
    http://www.intertek.com/polymers/composites/compression/

    http://www.intertek.com/polymers/tensile-testing/matrix-composite/

    http://www.intertek.com/polymers/composites/flexural-d7264/

    http://nptel.ac.in/courses/101104010/downloads/Lecture38.pdf

    https://www.sciencedirect.com/science/article/pii/S2452321616000093

    "American Society for Testing and Materials"

    You might also like