Calgary, Alberta Tulsa, OK

Stilwell, OK

Williston, ND
Evansville, WY La Coruna
Vernal, UT
Farmington, NM Nederland, TX
Gonzales, LA
Houston, TX
Lake Charles, LA
UAE
Mineral Wells, TX Dubai

Paris

Torino AUSTRALIA
BRAZIL
Porto Alegre Perth

Queretaro • Manufacturing / Engineering / Sales

• Engineering / Sales

SERVING CUSTOMERS FROM LOCATIONS

WORLDWIDE FOR OVER 75 YEARS

2
 TABLE OF CONTENTS
About PECOFacet.............................................................................................................4-5
Oil & Gas Technology Timeline........................................................................... 6-7
Contaminant Management................................................................................... 8-9
Filtration Equipment Selection Guide.................................................... 10-11
Gas Filtration
PEACH® Gemini PuraSep®

Horizontal Gas Coalescer............................................................................................ 12-13
Vertical Gas Coalescers.................................................................................................14-15
Gas Filter-Separators...................................................................................................... 16-17
Gas Separators & Scrubbers ...................................................................................... 18-19
Gas Cyclone Separators...................................................................................................... 20
ˆEngineered Filtration and Separation Skid Packages............................................21
Dry Gas Filters..................................................................................................................22-23

Liquid Filtration
BlastPure®
Auto-Clean Filtration System .................................................................................... 24-25

TABLE OF CONTENTS
XtreamPure®
High Flow Capacity Liquid Filter...............................................................................26-27
Liquid Filters..................................................................................................................... 28-29
Activated Carbon Adsorbers..................................................................................... 30-31
Liquid/Liquid Phase Coalescers............................................................................... 32-33

Multi-Purpose Housings............................................................................................. 34
Closures & Coalescing Plates.................................................................................. 35

PROVIDING FILTRATION FOR THE OIL & GAS INDUSTRY

•O ffshore Exploration & Production • Power Generation
• Water Disposal • City Gates
• Gas Gathering • Vehicle CNG
• Gas Processing • NGL Pipeline & Storage
• Gas Transmission • Fractionation
• Gas Storage • Refining
• LNG Liquification • Petrochemical

3
 A VERTICALLY
INTEGRATED
FILTRATION
COMPANY
ABOUT PECOFacet

FOCUSING ON TECHNOLOGY AND

PROVIDING TURNKEY SOLUTIONS

OUR COMPANY
PECOFacet is a leading manufacturer of filtration
and separation products for the oil & gas, aviation,
marine, environmental and general industrial
markets. Working with customers around the
world on diverse contaminant management
challenges, PECOFacet is known for providing
filtration solutions using innovative product
designs and advanced testing and services.

PECOFacet is a part of CLARCOR and operates

under their Industrial/Environmental segment. CLARCOR is a billion dollar plus holding
company specializing in filtration and contaminant handling solutions. The companies
under the CLARCOR umbrella, specializing in a broad range of filtration, make CLARCOR
the most diverse filter company in the world.

The name PECOFacet was formed in 2007 when CLARCOR purchased Perry Equipment
Corporation (PECO), a family owned leader in manufactured filtration products for the
natural gas processing and transmission industries, and merged the company with Facet
International, a leader in manufactured filtration products for fuel supply to aircraft and
ships for the aviation and marine markets. Facet International had already been a part of the
CLARCOR group since 1999.

Headquartered in Mineral Wells, Texas and with nearly 900 employees worldwide,
PECOFacet has manufacturing locations in Australia, Canada, Mexico, Oklahoma, Spain
and Texas. Sales and engineering offices are strategically located around the world. 2013
marked the completion of the Marney Dunman Perry Jr. Technology Center located in
Mineral Wells, Texas which will focus’ on research and development for future product
innovations, media development, and customer training.

4
 Research
&
Development

Services Engineering

Technology Lab Testing

ABOUT PECOFacet
Components Field Testing

Manufacturing

OUR PRODUCTS
PECOFacet products include filter housings and aftermarket cartridges such as gas
coalescers, dry gas filters, gas filter-separators, gas scrubbers, fuel/water separators and
liquid filters. Aftermarket cartridges can also be built to retrofit competitor housings.
Also manufactured are oily water separators, filtration systems, sewage treatment units,
electronic sensors for particle measurement and coke removal units for ethylene plants.

TURNKEY PROVIDER
Not all filtration companies are created equal. At PECOFacet we don’t want to just offer
our customers a product. We want to partner with our customers to understand their
contaminant challenges and provide valuable solutions to save them money, improve
their process performance and reduce environmental impact. In order to do that, we have
built a strong, reliable company. We invest in research, development and technologically
advanced testing facilities. We employ engineers who design forward thinking products
with our environment in mind. We manufacture several components that go into making
our finished products such as media, end caps, cores, vanes, cyclotubes, risers, and
closures. This ensures that our quality is closely monitored and maintained. Our employees
make sure our customers come first, providing a world-class service experience.

COMMITTED TO QUALITY
At PECOFacet we have a reputation for providing quality products. Our products
conform fully to contractual requirements and are designed, manufactured and tested
in accordance with the quality assurance principles set forth in ISO 9001:2008, with
additional controls to satisfy national and international codes such as ASME Section
VIII. PECOFacet is committed to continually improving the effectiveness of our Quality
Management System, and thereby our products and services.

5
 1936 1949 1953 1955

Bypass Lube
Oil Filter
Hook Vane

Filter-Separator

Dry Gas Filter

Cyclotube
Blade
Design
OIL & GAS TECHNOLOGY TIMELINE

Improved

ProComp VKO®
Vertical
Knock-Out

PEACH® Saturated
Depth Coalescing™

SafeLock Closure

2002 2001 2000 1999

2003

PEACH®
GOLD Scientific Process Solutions PEACH® Fusion
Cartridges Testing Business Launched

Generation 2
performance level
recipes for PEACH®
Saturated Depth
Coalescers

SafeLock 2 Closure PlantGard®

2004 2007 2008

6
 1965 1973 1981

Cyclonic Cyclotube

Wave Plate Vane

Quick Opening
Closure

High
Efficiency

1985
Vertical
Gas
Coalescer

OIL & GAS TECHNOLOGY TIMELINE

PEACH® Cartridge Process

Cyclonic
Mini-Cyclone
PEACH® Gemini PuraSep®

1998 1995 1990

Generation 3
performance level BlastPure®
recipes for PEACH® Auto-Clean
Saturated Depth Filtration System
Coalescers

VKC Cyclonic
Technology

Chemelean™
Economy
XtreamPure®
Liquid Filtration
High Flow Liquid Filtration

Protura PEACH®
(Nano Technology)

2012 2013 2014 2015

For a complete timeline please visit us online at www.PECOFacet.com/About-Us/History.

7
 Your Contaminant
Management
Partner SM

Today’s oil & gas environment requires more than just managing day-to-day filter
changes. There is an urgency to address complex contaminant management issues that
interconnect us all. Smart companies leverage partnerships that synergize with overall
corporate sustainability. PECOFacet is one of these companies.
CONTAMINANT MANAGEMENT

Working with our customers’ commercial and technology teams, we create contaminant
management solutions that fuse innovative technologies, products, advanced testing
and services.

Our global resources allow us to easily propagate these solutions from one facility to
another throughout the world. The outcome generates improved operational metrics that
drive sustainability and profits.

With over 75 years of industry knowledge, engineering vision, ongoing research, and
a vast network of resources, PECOFacet continually produces innovative contaminant
management solutions for an ever-changing industry landscape and an environmentally
conscious world.

8
The contaminant dictates the method
of filtration used to remove it.
In oil & gas applications contaminants come in a
wide variety of forms. At PECOFacet we believe
that proper filtration shouldn’t be solved by just one
type of equipment or cartridge style. That is why we

CONTAMINANT MANAGEMENT
have a variety of filter housings and cartridges to
handle even the most trying of contaminant removal
challenges. We always believe ‘The Contaminant
Dictates the Method’ upon which filter products we
select. With over eight categories of filter housing and
a multitude of depth and pleated cartridge options,
we can ensure the right selection for our customers
application needs.

Spent PEACH® Gemini Model PGC cartridges from field

9
 ALL YOUR FILTRATION
Wet Gas Wet Gas
High Capacity Wet Gas
Aerosol Liquid Wet Gas Bulk
Filtration & Filtration
High Liquid
High Efficiency & Separation
Efficiency Separation
Filter-Sep
Coalescing Coalescing 3–10 µm
1 µm
0.3 µm 0.3 µm
FILTRATION EQUIPMENT SELECTION GUIDE

Model 95V

Model 89 Model 85
Model 95SV
PEACH Gemini
®

PuraSep®
Model PGCPH

Model 77V
Model
95V-CT
Model 75H

Model
95SV-CT

Model
PEACH® Gemini 77V-VKO
PuraSep®
Model PGCPH-Slug
Model
95H-VBANK
Model 75V
Model
VKOC

Model
95H-CT

Boot-Sep™
Model GPFS

Model
Model 3AGB 95VKC

10
NEEDS IN ONE LOCATION

Dry Gas Filtration Liquid Filtration Liquid Phase Liquid

1 µm 1–100 µm Coalescing Adsorbtion

FILTRATION EQUIPMENT SELECTION GUIDE

Model 70
Model 110V

XtreamPure® Series 10
Model 55X

Model 110H
Model w/wafer pack
70V

SuperFlex™ Model 110H Model 10FB

w/cartridges

Model 90

Chemelean™
Model 55C
Model 110H
w/cartridges
PEACH® Fusion
Model 30, 30A Filtration System

Model 110HR
Model 55 w/wafer pack
Model
30F

Model Model 110HR

95V-MC Model 55HD w/cartridges

11
 PEACH Gemini PuraSep
® ®

The world’s first horizontal designed gas coalescer

The PEACH® Gemini PuraSep® is an innovative concept in gas coalescing
technology which provides the solids loading capabilities of a filter-separator with
the liquid removal efficiency of a vertical coalescer. This patented design provides
ultra-clean gas with high efficiency removal of solid and liquid contaminants
down to 0.3 microns. It can effectively handle higher inlet solid and liquid loads
versus conventional vertical coalescing equipment and is designed to remove
a wide range of liquid contaminants such as lubricating oils, low surface
tension liquids, and aerosol mists.
Two stages of coalescing and separation are contained in a single, easily
replaceable PEACH® Gemini cartridge. Eliminating the need for a conventional 2nd
stage mist extraction device, such as a vane or cyclotube, means no concerns
of plugging or corrosion. The cartridge seats inside the housing via a riser
tube with the use of a chevron seal. The seal provides a separation of the
cartridge so that gas entering the housing will flow from outside-to-inside
through the front of the cartridge (1st stage) where solids are removed and
coalescing is begun. Once past the chevron seal, the gas will flow inside-to-
PEACH® GEMINI PURASEP®

outside through the back of the cartridge (2nd stage) providing a smooth
transition of coalesced liquids from the 1st stage into the 2nd
stage. Keeping in mind the importance today’s
customer places on minimizing
operation and maintenance
HORIZONTAL GAS COALESCER

costs, simple, quick and

trouble-free operation has
been incorporated into
the PEACH® Gemini
PuraSep® design.

• 254mm to 1829mm
diameter custom
designs available
·100% turn-down
· User-friendly
· Removes 99.9% of
solids 0.3 microns
and larger
· Removes 99.5% of
liquids 0.3 microns and
larger using standard
PGC cartridge
· Removes 99.99% of liquids 0.3
microns and larger using
PGC PL-20 cartridge
· Removes 99.99+% of liquids 0.3 microns
and larger using PGC PL-23 cartridge
(light foam)

28X more liquid

capacity and 7X
greater solids capacity
than a vertical coalescer Model PGCPH

12
 Model
PGCPH-Slug

PEACH® GEMINI PURASEP®

HORIZONTAL GAS COALESCER
Cartridge Model PGC
The PEACH® Gemini PuraSep®
uses the unique, patented PEACH®
Gemini cartridge technology.
PGC cartridges are rigid enough
to withstand abrasion and heavy
liquids, yet maintain porosity and
permeability for lower differential
pressure and extended contaminant
removal capacity. PGC cartridges
also provide a tortuous (axial, radial
and helical) flow path for the wet
gas to take through the depth of the
Model PGCPH media, increasing the probability for
S tock units are available at contaminant particles to impact fibers
10” through 60” diameter in and be captured throughout the
600# ANSI rating. depth of the media.

The PGC cartridge uses the concept

of Saturated Depth Coalescing™ to
provide an open 3-D depth matrix
structure which allows liquids to
saturate the media depth and grow to
fullest potential, then drain with gravity
when the droplet is ready, all while
maintaining a low differential pressure.

US Patent 6,168,647 • US Patent 5,919,284

13
 Vertical Gas Coalescers
PECOFacet Model 77V gas coalescers are highly efficient
mist and aerosol removers down to the 0.3 micron
level. Typical Model 77V coalescer applications include
desiccant bed protection, compressor discharge lube
oil removal, feed gas filtration, process liquid reclaiming,
and general low surface tension mist removal. Standard
design includes PEACH ® technology Saturated Depth
Coalescing ™ cartridges, PECOFacet exclusive full diameter
Quick Opening Closure, stilling screen and outlet baffle.
Units are designed from 152mm through 1524mm
diameter and constructed in accordance with all
major design codes.
Model
77V-VKO Stock units are available in 203mm, 406mm,
660mm, 864mm and 1219mm diameters at 600#
ANSI rating.
Model 77V
Model 89 small volume vertical reverse-flow coalescers are
typically used for fuel gas coalescing yielding a high level of
aerosol and solid particle removal down to the 0.3 micron level.
They are designed and code stamped in accordance with ASME
VERTICAL GAS COALESCERS

Code Section VIII Div. 1.

Stock units are available from 152mm through 254mm diameter

at 150# ANSI rating. Model 89

PECOFacet recommends using PEACH® DynaCeptor™ cartridges

with Saturated Depth Coalescing™ technology. This technology is
extremely different than pleated products which have to be tight
to screen down to 0.3 micron and shed the coalesced liquids off
quickly to prevent high differential pressure. Saturated Depth
Coalescing™ provides a gradient depth structure with high porosity
and permeability for the coalesced liquids to collect and saturate
the cartridge without building up a high differential pressure or
having to drain too quickly.

Cartridge Model NGGC

Available in various Performance Levels to handle many different kinds of
coalescing applications.

ALL CARTRIDGE OPTIONS

PEACH® DynaCeptor™
NGGC PL-01..............PEACH® Saturated Depth Polyester
• 99.5% liquids & 99.9% solids ≥0.3µm • 116°C
NGGC PL-20.............PEACH® Saturated Depth Polyester
• 99.99% liquids & solids ≥0.3µm • 116°C
NGGC PL-23.............PEACH® Saturated Depth Polyester
• 99.99+% liquids & solids ≥0.3µm • 116°C (light foam applications)
- Polypropylene version available for applications with trace amine
- Use PZC version for housings with z-bar riser post
p-Ceptor™
NGGC PL-51..............Pleated Microglass • 99.97% liquids & solids ≥0.3µm • 116°C
FibrCeptor™
FF..................................Depth Microglass • 99.5% liquids & solids ≥0.3µm • 177°C
FFP...............................Depth Microglass with internal pleat pack
• 99.5% liquids & solids ≥0.3µm • 177°C
FF-HTO.......................Depth Microglass • 99.5% liquids & solids ≥0.3µm • 232°C
14
Vertical Air/Gas Coalescers
PECOFacet Model 3AGB air/gas coalescers remove solids and
liquids from air or gas streams. The vertical housing provides easy
access for inspection and change-out of cartridges. The unique
baffle plate design at the inlet removes large amounts of solid
particulate and entrained liquids, including slugs, from the air or
gas stream before entering the coalescer and separator cartridges.
Units are designed from 254mm through 914mm diameter at 10
barg and constructed in accordance with ASME design codes.

Model 3AGB

AGB cartridges consist of coalescers and separators. The

coalescer cartridge performs the dual function of coalescing
liquids and filtering microscopic solid particles. Construction
Cartridge Models: includes a depth glass media, resin impregnated cellulose internal

VERTICAL GAS COALESCERS

Coalescers: CD6V, CD13, CB28 pleat pack to handle solid contaminant and outer perforated
Separators: SP408NC-1, shell with cotton sock overlay to provide excellent coalescing
SP11NG-1, drainage plus structural support for inside-to-outside flow
SP14NC-1 direction. The separator is constructed of specially treated pleated
resin impregnated cellulose and is used to repel any droplets of
coalesced liquids which did not settle to the sump with gravity.

ProComp VKO®
Vertical Knock-Out Filters & Coalescers
PECOFacet Model VKOF & VKOC housings are specifically designed to handle
the most demanding gas filtration applications found in the compression
industry. Created to be efficient and economical, these units utilize proprietary
Dynamic Separation Technology coupled with PEACH® cartridge technology.
Model VKOF (Vertical Knock-Out Filter) is for applications on compressor inlets
where bulk liquids and solids removal from gas streams is required. Model VKOC
(Vertical Knock-Out Coalescer) is for gas/oil separation applications, like rotary
screw compressors, where high discharge liquid levels are typical.

ProComp Gas/Liquid Vortex coalescer & particulate

cartridges, utilizing PEACH® technology, are used in the Model
Model VKOF
VKOF & VKOC housings.
and VKOC
Model PGLVP is used in the VKOF housing and provides three
grades of solids removal protection: Extra Fine, Fine and Coarse.

Model PGLVC is used in the VKOC housing and provides

coalescing down to 0.3 microns.

Cartridge Model PGLVP & PGLVC

15
 Gas Filter-Separators
Since inventing the filter-separator in the 1950’s, PECOFacet Model 75
filter-seps have set the standard for reliability and performance on today’s
gas pipelines. Model 75 filter-seps are found removing solids and liquids on
compressor suctions and plant entrances throughout the world. Standard
construction includes PEACH® technology cartridges, the PECOFacet
exclusive Quick Opening Closure, z-bar 4 point cartridge supports, and
high efficiency mist extractors.
Mist extractor options include
wave plate vane, wire mesh
and cyclotube technology.
Housing design is available
in all major design codes and
certifications. Model 75 filter-
seps are available in vertical
Model 75V and horizontal configurations
Model 75H in 152mm through 2134mm
diameter sizes.

Model 85 small volume fuel gas filter-separators are used in fuel gas
conditioning filtration for compressors and engines used throughout
the industry. They are designed and code stamped in accordance with
GAS FILTER-SEPARATORS

ASME Code Section VIII Div. 1.

Stock units are available from 152mm through 254mm diameter at 150#
ANSI rating,

Model 85

PECOFacet recommends using PEACH® DynaSep™ cartridges

in filter-separators. This PEACH® technology cartridge is a
great choice for removing deformable and shear-sensitive
contaminants typically found in natural gas applications. The
rigid structure maintains an open porosity and permeability,
while the tortuous flow path increases the probability for
contaminants to impact filter fibers.

Cartridge Model PCHG

Available from 0.3 microns to capture iron sulfide
and other shear sensitive contaminant, all the
way up to 10 microns for larger debris removal.

ALL CARTRIDGE OPTIONS

PEACH DynaSep™
®

PCHG.......... PEACH® Polyester • 99.98% efficiency • 0.3, 0.5, 1, 5, 10µm •116°C

PCHG-PP... PEACH® Polypropylene • 99.98% efficiency • 0.3, 0.5, 1, 5, 10µm • 82°C

FibrSep™ GX
FGX.............. Depth Polyester •
 Great for Scheduled Maintenance
• 99.5% efficiency • 1µm • 116°C

FibrSep™
FG................. Depth Glass • 98% efficiency • 0.3, 0.5, 1, 5, 10, 25, 50µm • 135°C
FGGF........... Depth Glass • 98% efficiency • 1µm • 288°C
16
Boot-Sep™ Gas Filter-Separators for
Production & Gathering
PECOFacet Boot-Sep ™ Model GPFS is designed specifically for the demands of the natural
gas production and gathering industry providing three types of units in stock ready for
same day shipment and competitive pricing. Boot-Sep ™ filter-seps are easy to install and
maintain and come with FibrSep ™ GX synthetic depth cartridge technology. Whether you’re
building a new gathering system or trying
to improve the performance of existing
compressors and processing equipment,
the Boot-Sep ™ is a great investment for your
filtration needs!

Stock units are designed and constructed

to ASME code and available in horizontal
configurations in 305mm, 406mm and Model GPFS
610mm diameter sizes.

FibrSep™ GX cartridges are the perfect pairing to the

Boot-Sep™ housing. The cartridges provide an upgrade
in filtration performance from traditional fiberglass

GAS FILTER-SEPARATORS
cartridges at an economical price point. FibrSep™ GX is a
great choice for those changing cartridges on a scheduled
maintenance versus maximum differential pressure.

Cartridge Model FGX

Available in polyester media at 1 micron filtration.

Model 75H Filter-Separator loaded with contaminants

17
 Vane Style - Gas Separators & Scrubbers
PECOFacet Model 95 vane mist extractors can be found throughout the industry as
production separators, three phase separators, knock-out drums and in a variety of other
applications where liquid removal is required. The Model 95 offers the PECOFacet Hook
Vane and proprietary Wave Plate Vane mist extractors for high efficiency, reliable free
liquid and aerosol mist removal. Units are available with or without slug catching ability,
in vertical and horizontal configurations. Design is available in all major design codes and
certifications. Sizes are available from 305mm through 3048mm diameter.
GAS SEPARATORS & SCRUBBERS

Model 95V
Separator

Model 95H-VBANK Model 95SV

Scrubber Scrubber

WAVE PLATE VANES

The Wave Plate Vane, PECOFacet’s most popular vane style, provides a controlled change
of direction for the gas stream. Liquid droplets impinge upon the vane plates and become
trapped in individual drain passages where they collect and coalesce until heavy enough
to drain out by gravity.
• 98% efficiency of liquid droplets 8-10 microns and larger
• High liquid loading capability
• Best for removing hydrocarbon liquids and water
• 10 to 1 turn-down ratio

18
Cyclotube Style - Gas Separators & Scrubbers
The PECOFacet Model 95-CT proprietary two stage vertical tube separation system
has proven to yield high efficiencies for mechanical or non-disposable separation
devices. PECOFacet Cyclotubes are used in production as initial liquid separators, on gas
coalescer and filter separator inlets as bulk liquid knockouts, as multistage compression
separators, process liquid reclaimers downstream of contact towers and in many other
critical locations. Units are available with or without slug capacity, in vertical or horizontal
configurations and in diameter sizes ranging from 305mm through 3048mm. Designs in
all major design codes and certifications are available.

GAS SEPARATORS & SCRUBBERS

Model 95SV-CT
Scrubber

Model 95V-CT Model 95H-CT

Separator Separator

CYCLOTUBES
The Cyclotube takes the incoming gas stream and applies a
centrifugal motion to it which separates particles from the gas.
The inertia imparted upon the liquid particles by the swirling
motion forces them to the outer wall of the Cyclotube, where
they are ejected into a quiescent zone for removal.

• 98% liquid droplets 8-10 microns and larger (Low Energy)

• 98% liquid droplets 3-5 microns and larger (High Energy)
• Best for removing lube oil, glycol, paraffin,
brine, asphaltenes
• Low susceptibility to plugging
• Highest efficiency on “crawling” liquids
and low surface tension liquids
• 4 to 1 turn-down ratio

19
 Vertical Knock-Out
Gas Cyclone Separator
The PECOFacet Model 95VKC (Vertical Knockout
Cyclone) is a rugged, bulk solids removal, gas
separator. The model 95VKC is designed to handle
high flow rates and a larger volume of solids than
a typical cyclone separator. The vertical knockout
cyclone resists plugging in the presence of wet
solids and operates at a lower pressure drop than
other cyclone separators. The unit is designed to
remove greater than 85% of 10 micron and larger
contaminant, up to 40,000 ppm in the influent.
Removing solids from the sump is easy with clean-
out valves or a man way to facilitate the removal.
The Model 95VKC can be used upstream of dry gas
filters to reduce the cartridge change-out frequency
for black powder or other high solids loading
applications. The Model 95VKC has a turn-down
ratio of 4 to 1.
GAS CYCLONE SEPARATORS

Model 95VKC

Mini-Cyclone Gas Separator

The PECOFacet Model 95V-MC (Mini-Cyclone) is
a liquid or solids cyclonic gas separator. The Model
95V-MC offers a high efficiency, contaminant
removal system that will remove dry solids in the gas
stream up to 600 ppm(w) and free liquids to 20,000
ppm. The Model 95V-MC provides a rated efficiency
for 100% removal of dry solid particles 8 micron and
larger. For a liquid mist the Model 95-MC will remove
100% of the liquid particles 5 micron and larger
including low surface tension liquid contaminant.
Applications for the Model 95V-MC might include
upstream of a fuel gas coalescer or storage gas
withdrawal
locations. They
have also been
used upstream
and downstream
of amine and
glycol contact
towers. The
Model 95V-MC
has a turn-down
ratio of 4 to 1.

Model 95V-MC

20
Engineered Filtration &
Separation Skid Packages
PECOFacet offers custom, complete

ENGINEERED FILTRATION & SEPARATION SKID PACKAGES

packaged skid units which can be
equipped to include a variety of
PECOFacet’s filtration equipment coupled
with instrumentation, valves, piping,
electrical, insulation, etc. to be ready for
“Plug and Play” installation at the job-site.

The skid packages can be arranged in a

variety of configurations in order to satisfy
our customer’s needs. Please consult the
factory for more information regarding
skid packages.

• Fuel Gas Filtration Skids

• Duplex Filtration Skids

• Portable

• Efficient

• Cost Effective

• Turn Key

• Custom Design

21
 Dry Gas Filters
PECOFacet Model 70 dry gas filters are designed to handle a variety of
solid particle removal applications. Standard design includes the exclusive
PECOFacet Quick Opening Closure and z-bar 4 point cartridge supports.

Model 70 dry gas filters add the flexibility of using a variety of filter
cartridges to yield optimum economics and maximum performance
under nearly any service condition. Design is available in all major codes
and certifications. Sizes range from 152mm through 2134mm diameter in
vertical and horizontal configurations.

Model 70V

Model 70H

Model 90 small volume gas housings are used for dry, solid
DRY GAS FILTERS

particle removal. They are designed and code stamped in

accordance with ASME Code Section VIII Div. 1.

Stock units are available from 152mm through 254mm diameter

at 150# ANSI rating. Model 90

TruGard™ cartridges are constructed of

pleated media to trap rigid, solid particles
and aid in building a “filter cake.”

Cartridge Model PSFG

Available from 0.5 microns to 50 micron
to handle large contaminant spreads.

ALL CARTRIDGE OPTIONS

TruGard™
PSFG -E...................Pleated Polyester • 99.98% efficiency • 0.5, 1, 5, 10, 20, 50µm • 116°C
PSFG -G..................Pleated Glass • 99.98% efficiency • 0.5, 1, 5, 10, 20, 50µm • 116°C
PSFG -L...................Pleated Polypropylene • 99.98% efficiency • 0.5, 1, 5, 10, 20, 50µm •82°C
PSFG -N..................Pleated Nylon • 99.98% efficiency • 0.5, 1, 5, 10, 20, 50µm • 149°C

PEACH® DynaSep™
PCHG......................PEACH® Polyester • 99.98% efficiency • 0.3, 0.5, 1, 5, 10µm • 116°C
PCHG-PP...............PEACH® Polypropylene • 99.98% efficiency • 0.3, 0.5, 1, 5, 10µm • 82°C

FibrSep™ HTO
FGGF.......................Depth Glass • 98% efficiency • 1µm • 288°C

22
 In-Line Dry Gas Filters
PECOFacet offers a full line of dry gas filters for gas distribution,
regulator stations, instrument gas, and a variety of other dry gas applications.

Model 30 Model 30F

Model 30 is a cast steel design available Model 30F is a fabricated steel design
in 51mm, 76mm and 102mm flange available in 51mm through 305mm flange
connections up to 600# ANSI rating. connections up to 600# ANSI and is
designed in accordance with ASME Code
Model 30A offers an economical Section VIII Div. 1.
alternative to the Model 30. It is lightweight
cast aluminum available in 51mm, 76mm

DRY GAS FILTERS

and 102mm” flanged connections at 150#
ANSI rating.
PleatGard™ cartridges are constructed
of pleated media to trap rigid, solid
particles and aid in building a “filter
GritGard™ cartridges are constructed of cake.” Cartridges are similar to a bag
pleated media to trap rigid, solid particles design flowing inside-to-outside and
and aid in building a “filter cake.” Flow is trapping contaminants
outside-to-inside and with compression on the inside leaving the
spring sealing. housing clean once the
cartridge is removed.

Cartridge Models
PS-559, PS-5519, PS-819
Available in polyester media
from 2 micron to 20 micron.
Cartridge Models PEPP & PEPS
Available in polyester or cellulose medias from 2
micron to 20 micron.

Cartridge Model PCHG-30F

A unique PEACH ® version of this cartridge A unique PEACH®

is available in our DynaGard™ Series for version of this
handling shear sensitive contaminants or for cartridge is
providing added durability versus pleats. available in our
DynaGard™
Series for handling
shear sensitive
contaminants
or for providing
Cartridge Models added durability
PCHG-6-3.12 & 6-7.18 versus pleats.

23
 Flow-Back and Production Water
Auto-Clean Filtration System
BlastPure® water filtration systems are self-contained and
field proven to remove heavy concentrations of bulk solids
and semi-solids from a liquid stream without the use of
consumable bags or cartridges. Automatic continuous
operation and media cleaning are driven by an industrial
rated micro-controller. Operation can be easily adjusted through
a locally mounted HMI screen.

BlastPure® systems utilize a patent pending cyclonically aided filtration

system designed to minimize back-flushing cycles and waste generation.
The filtration system employs a unique back flush that literally “blasts” the
AUTO-CLEAN FILTRATION SYSTEM

system’s stainless steel filter media clean of the most troublesome fouling
type contaminants during the cleaning cycle.
BLASTPURE®

BlastPure® filtration systems are simple, robust units designed to provide

continuous trouble-free operation. Engineered, cleanable filter media’s
are used to handle applications such as:
• Pre frac water filtration
• Final stage water polishing filtration
• Injection pump and reservoir protection
• Truck off-load service handling heavily fouled water loaded with gel,
oil, and drilling mud

BlastPure® systems can be sized for any liquid filtration application and
can be employed as permanent facility units or as mobile units for flow
back sites or other field operation services. The systems can handle a
contaminant concentration up to 20% with removal levels from 10 to 500
microns available.

Dirty Influent Clean Effluent

24
 Model BPS 14
2,226 Liters/Minute
Manual System

AUTO-CLEAN FILTRATION SYSTEM

BLASTPURE®
Model BPS 30
4,770 Liters/Minute
Automatic System, Hands-Free Operation,
Computer Control

25
 High Flow Capacity & High Contaminant Loading Liquid Filters
The latest liquid housing line in PECOFacet innovation, the XtreamPure® provides
high capacity filtration for virtually any liquid application by utilizing large 152mm
diameter cartridges in 1016mm and 1524mm lengths with a variety of material choices for
compatibility and performance needs. The inside-to-outside flow through the cartridge
makes sure contaminant is captured within the cartridge allowing a cleaner cartridge
extraction during change-outs. Design is in accordance with all major design codes and
available in vertical and horizontal configurations, 254mm through 2134mm diameter.

Stock units are available in 254mm and 457mm diameter at 150# and 600# ANSI ratings.
HIGH FLOW CAPACITY LIQUID FILTER
XTREAMPURE®

Model 55HX

26
Cartridge Model XP Cartridge Model XPHP
Available in depth or pleated High performance, enhanced
styles with various material multi-layered media/screen
choices for best contaminant pleated cartridge options for
removal selection. maximum contaminant loading
and service life.

ALL CARTRIDGE OPTIONS

 leated Polyester with Louvered
P
XP-E

HIGH FLOW CAPACITY LIQUID FILTER

Outer Support
XPHP-E

XTREAMPURE®
99.98% efficiency • 5μm-100μm • 240°F

 leated Polypropylene with

P
XP-L
Polypropylene Cage Outer Support
XPHP-L
99.98% efficiency • 5μm-100μm • 82°C

 leated Glass/Acrylic with Louvered

P
XP-G1
Outer Support
XPHP-G1
99.98% efficiency • 1μm-30μm • 121°C

 leated Glass/Acrylic with Corrosion

P
XP-G2
Resistant Outer Support
XPHP-G2
99.98% efficiency • 5μm-100μm • 121°C

Pleated Glass/Epoxy with Louvered

XP-GHT1
Outer Support
XPHP-GHT1
99.98% efficiency • 1μm-30μm • 177°C

 leated Glass/Epoxy with Corrosion

P
XP-GHT2
Resistant Outer Support
XPHP-GHT2
99.98% efficiency • 1μm-30μm • 177°C

 EACH® Polypropylene
P
XP-PCHL
90% efficiency • 5μm-40μm • 82°C

 EACH® Polyester
P
XP-PCHE
90% efficiency • 5μm-40μm • 116°C

 leated Cellulose with Louvered

P
XP-C1 Outer Support
90% efficiency • 5μm-40μm • 121°C

 leated Cellulose with Corrosion

P
XP-C2 Resistant Outer Support
90% efficiency • 5μm-40μm • 121°C

27
 Superior Contaminant Loading Liquid Filters
PECOFacet Model 55HD liquid housings are designed
around GOLDXtream® and PleatXtream™ cartridges that
flow outside-to-inside. Cartridges flow up to 227 lpm
and hold on average around 9 kg of contaminant. 55HD
housings have removable cartridge
support posts and a front-end cartridge
support plate as part of the standard
design and can handle a wide array of
liquid applications. Design is in accordance
with all major design codes and available Model 55HDH
in vertical and horizontal configurations,
254mm through 1524mm diameter.

Stock units are available in 254mm,

457mm, 610mm and 914mm diameter at
150# ANSI rating. Model 55HDV

GOLDXtream® cartridges utilize PEACH® Gradient Optimized Liquid

Depth technology which forces the liquid stream in a tortuous flow path
through not one, but two depth media tubes with a shock zone between,
changing the annular velocity of the fluid allowing for maximum
contaminant removal. GOLDXtream® cartridges have proven to provide
excellent filtration performance in amine and glycol systems where
deformable contaminants are quite common.
LIQUID FILTERS

Cartridge Model PHD

Available in polyester or polypropylene medias from 1 micron to 100 micron.

PleatXtream™ cartridges utilize w-Pleat technology with

multi-layered medias and screens to keep pleats in place
and provide maximized surface area for contaminant
“cake” build up. Cartridge Model OPHD
Available in polyester or polypropylene
medias from 2 micron to 70 micron.

Economy Liquid Filters for

Flow Rates up to 760 lpm
The PECOFacet ChemeleanTM series liquid housings and cartridges
offer versatility to adapt to a wide variety of process liquid applications
up to 757 lpm. The housings come in two sizes to hold either a 508mm
length cartridge or 1016mm length cartridge. ChemeleanTM cartridges
come in a wide range of media choices for suitable fluid compatibility.
Stock units are available in 203mm diameter at 150# ANSI rating.
51mm NPT standard connections with option for changing to 51mm
flange connections.
Dual rated: 19 barg at 121°C without corrosion allowance and 10 barg at
121°C with 3mm corrosion allowance.

Model 55C Cartridge Model CM

Available in pleated polypropylene,
polyester, glass or cellulose and PEACH®
polyester or polypropylene.

28
Traditional Liquid Filters
PECOFacet Model 55 liquid housings fit a variety of different
style 64mm diameter and 76mm diameter cartridges depending
on the application need. Housings have diameter ranges from
152mm through 1829mm and come standard with 3mm corrosion
allowance, all major design codes and certifications, Quick Opening
Swing-Bolt Closures, and easy-to-use closure davits. Flow rates up
to 18,075 lpm and design pressures through 690 barg are available.

Stock units are available in 152mm, 203mm, 305mm, 457, 610mm and
914mm diameter at 150# ANSI rating.

Model 55

DEPTH STYLE CARTRIDGE OPTIONS

PEACH-Pure™ Res-Pure™
Made from PEACH® Resin bonded acrylic and
Models technology in polyester polyester. Good for use
Model PRB
PPL & P90 or polypropylene media. with high viscosity fluids.
Bonded fibers with
tortuous flow path.
Tex-Pure™
An industry icon known as

LIQUID FILTERS
EPIC™ II Models FT, FTS, the “sock filter” or “rolled
Polypropylene meltblown FMP, GF, CS, WC depth” filter. Available in
Model EPC with internal core for a variety of materials with
added strength and dual the most common being a
zone layering. cotton/excelsior blend.

Melt-Pure™ PureClear™
Economy polypropylene String wound style
Model MP meltblown without core. Model U offered in a variety of
string materials for a wide
range of applications and
chemical compatibilities.

PLEATED STYLE CARTRIDGE OPTIONS

Tru-Pleat™ CelluPleat™
Pleated synthetic or Pleated cellulose
Model PS microglass media with Model FI media with steel
synthetic hardware hardware.
(metal optional).

CelluPleat™ E
Tru-Cell ™
Pleated cellulose
Pleated composite Model CF media with synthetic
Model CP blend of synthetic and hardware.
cellulose fibers with
synthetic hardware
(metal optional). Provides
economical alternative to
pure synthetics.

29
 Granular Activated Carbon Adsorbers
The PECOFacet model of carbon housings utilize quality activated
carbon to adsorb dissolved liquid impurities from process streams
such as air, gas, water, amine and glycol. Removal of these impurities
is critical to prevent problems such as foaming, odor and contaminant
build up.

The Model 10 uses activated carbon canisters to allow fast, easy

change-outs through a full diameter PECOFacet Quick Opening
Swing-Bolt Closure. Diameters from 356mm through 1676mm are
available to all major codes with 3mm corrosion allowance.

Stock Units are available in 356mm, 610mm and 914mm diameter at

150# ANSI rating.

Model 10
ACTIVATED CARBON ADSORBERS

CarboMax™ Canisters
Activated carbon bound in a canister form is a safe, easy to manage, and
economical way to effectively remove dissolved impurities from process
streams such as amine and glycol systems. PECOFacet uses the highest quality
activated carbon making sure that high efficiency adsorption is achieved.

The Model 10FB uses a fixed bed of activated carbon

beneficial for large liquid and gas purification services. The
10FB utilizes the PECOFacet outlet header lateral system
to eliminate bed channeling and carbon fine discharge.
Diameters from 610mm through 3556mm are available to all
major codes with 3mm corrosion allowance.

CarboMax™ Bulk
Loose activated carbon and
non-activated support carbon
for fixed bed style housings.

Available in 4x12 and

Model 10FB 8x30 mesh sizes.

30
PEACH Fusion Advanced Activated Carbon Adsorber Skid
®

Lower Hydrocarbon Content and Suspended Solids

PECOFacet offers a skid-mounted, portable, full-stream filtration system featuring PEACH®
Fusion technology. In the natural gas industry, treating solvents contain a variety of
contaminants which are most economically removed through a multistage system.

The PEACH ® Fusion Filtration System is a

three-stage system which can be mobilized
and plumbed in easily. It can treat amine or
glycol systems with 20 MMSCFD or less of gas
throughput and 19 lpm or less amine or glycol
flow rate.

Stage 1 – a coarse grade, oil absorbing bag

removes large, rigid particles such as
rust, sand and weld slag

Stage 2 & 3 – are the different sections of the

ACTIVATED CARBON ADSORBERS

PEACH® Fusion cartridge

Stage 2 – helical layers of the PEACH® outer sleeve

remove deformable and shear sensitive
contaminants such as degradation
products, iron sulfide and iron carbonate
and absorbs free hydrocarbon liquid

Stage 3 – activated carbon block captures

and adsorbs any residual traces of
hydrocarbon liquid

The “Fusion” of activated carbon block with

engineered PEACH® filtration makes this cartridge
a winning combination!
At the heart of PEACH ® Fusion technology cartridges is a porous,
extruded block of activated carbon. This form of activated carbon
maximizes hydrocarbon removal efficiency and limits carbon fines
into the amine or glycol stream. The carbon block is encased in a
specially designed PEACH ® filter sleeve that has been optimized for
service in treating solvents. The PEACH ® sleeve filters particulate and
absorbs hydrocarbons, extending the on-stream life of the carbon
block it encases.

Cartridge Model CB
Smaller and easier to handle footprint than granular
canisters. Sizes available to retrofit PECOFacet
Model 10 granular canister housings.

31
 Liquid/Liquid Phase Coalescers
PECOFacet Liquid/Liquid Phase Coalescers have provided years of trouble-free service in
refineries, production fields and plants around the world. PECOFacet process engineers
have combined scientific principles and proven separation techniques to perform the
coalescence and separation between two immiscible liquids with different densities.
Design is in accordance with all major design codes and certifications. Units are available
for flow rates up to 4,350 gpm.

Model 110V vertical liquid/liquid phase coalescers utilize first stage

hydrophilic coalescer cartridges and second stage hydrophobic separator
cartridges to perform the separation. The flow through the coalescer
cartridge is from inside-to-outside where fine liquid droplets of the
discontinuous/immiscible phase are coalesced into larger droplets and
separated by gravity. The coalescer will also filter out solid particles
which would reduce coalescing effectiveness and require more frequent
cartridge change-outs, increasing operation costs. So if solids are present,
it is recommended to have a particulate pre-filter, such as the XtreamPure®,
to remove solids before going into the 110V. After the discontinuous liquid
phase is coalesced, the continuous phase liquid flows from outside-to-inside
through the separator cartridge. This step further purifies the continuous
LIQUID/LIQUID PHASE COALESCERS

phase by removing any remaining discontinuous/immiscible droplets

still entrained. The 110V design handles immiscible liquids with an inlet
concentration up to 5% by volume (50,000 PPMV) and removes water
down to 10 PPMV or less. Design is available in 14” through 60” diameter.

Common applications include removal of free water from:

Model 110V • hydrocarbon condensate • LPG
• diesel • lube oil
• kerosene • aromatics

CARTRIDGE OPTIONS
XtreamPhase® 6P & 6T
• Available in two media types
•D epth polymeric media utilizing PEACH ® Saturated
Depth Coalescing™ technology recommended for water
separation from hydrocarbons
•P leated Timlar™ fluoropolymer media recommended for
low interfacial surface tension and corrosive separation
Models PLPC & TLPC
applications

InterPhase™ C
• Depth glass coalescer
InterPhase™ CPF
•D epth glass coalescer with internal pleat pack for solid
contaminant removal
Models C, CB, • Available in 1, 5, and 25 micron pre-filtration
CC, CR

InterPhase™ SP
• Pleated, silicone treated cellulose separator
InterPhase™ SS
• Hydrophobic synthetic mesh separator
InterPhase™ ST
Models SP, SS, ST • Hydrophobic Teflon coated screen separator

32
 Model 110H & 110HR horizontal liquid/liquid
phase coalescers utilize hydrophilic coalescer
cartridges or a wafer pack to coalesce the
discontinuous phase fluid from the continuous
phase fluid. The housing length is designed
to provide enough settling distance after the
coalescer cartridges or wafer pack to allow for
coalesced droplets to separate from the continuous
phase fluid. In this design the difference in density
between the two fluids needs to be at least 20%.
If the discontinuous phase fluid is heavier than
the continuous phase fluid, then the 110H model
is used. The 110H outlet nozzle for the continuous
lighter phase fluid is located on the top of the
Model 110H w/ cartridges
housing and includes a “boot” at the bottom of
the housing to collect the heavier discontinuous fluid. If the discontinuous phase fluid is lighter
than the continuous phase fluid then the 110HR model is used. The 110HR outlet nozzle for the
continuous heavier phase fluid is on the bottom of the housing and includes a “dome” at the
top of the housing to collect the lighter discontinuous fluid. The 110H & 110HR designs handle
immiscible liquids with an inlet concentration up to 10% by volume (100,000 PPMV). Removal

LIQUID/LIQUID PHASE COALESCERS

of the discontinuous phase fluid down to 15-20 PPMV is achieved using the coalescer cartridge
style. When using wafer packs, the removal level will vary by the wafer pack material chosen. A
fiberglass wafer pack will remove down to 15-20 PPMV while an excelsior or stainless steel wafer
pack will remove down to 50-75 PPMV. Design is available in 8” through 84” diameter.
3 Phase Separator designs are also available.

Common applications include removal of:

• Caustic from fuels • Free water from Hydrogen Peroxide
• Amine from hydrocarbons • Oil from water
• Oil from ammonia • Hydrocarbon from quench water

Model 110H w/ wafer pack Model 110HR w/ cartridges

WAFER PACK OPTIONS

InterPhase™ Packs
Wafer shaped mass packed coalescing media are available for
the Model 110H units in three material choices based on desired
liquid and solids removal efficiencies.
• Excelsior (wood)
• Fiberglass
• Stainless Steel Wool

33
 SuperFlex™ Multi-Purpose Filters
PECOFacet SuperFlex™ housings are small, economical, carbon steel units that may be used
as particulate filters, air/gas filter-separators, liquid phase separators or clay/carbon adsorbers
depending on the cartridges used.

Stock units are available in 203mm diameter with 51mm NPT connections, built to ASME
Code, Section VIII, Div. 1 and designed for 17 barg. Stainless steel versions are also available.

Model MS removes solid Model VCS removes water

contaminants from liquids, from hydrocarbons.
compressed air or natural gas. Cartridge options:
Cartridge options: • Model CC-23-7 or CC-23C Coalescer
•C elluPleat™ XL, • Model CS-94 or CS-94-C Separator
Model FI, Pleated Paper Style
•T ru-Pleat™ XL, Model FS removes hydrocarbon
Model PS Pleated Synthetic Style and degradation products from
•G OLDXtream® 600D, fluids such as amine, glycol, oils
Model 600D PEACH® GOLD and fuels. Clay can also be used to
Depth Style remove surfactant from fuels.
Cartridge options:
MULTI-PURPOSE HOUSINGS

Model AGS removes oil, water, mist • Model C-766-4 Clay

and solids from compressed air or • Model CA718-C Carbon
natural gas.
Cartridge options:
SuperFlex •M odel CC-23-7 or CC-23C Coalescer
• Model CS-98-2 Separator

Fuel-Gard® Multi-Purpose Filters

PECOFacet Fuel-Gard ® VF-21SB/22SB housings are small, economical, in-
line units that may be used as particulate filters, air/gas filter-separators, liquid
phase separators or absorptive filters depending on the cartridges used. These
single cartridge housings are made from carbon steel and epoxy coated on
the interior and exterior to protect against corrosion.

Stock units are available to hold either a 229mm or 305mm cartridge and are
designed for 10 barg maximum working pressure on liquid flows up to 189 lpm, or
306 m3/hr on air/gas. Inlet and outlet connections are 38mm NPT female threaded.

Model VF-21SB housing is approximately Model VF-22SB housing is approximately

406mm long and holds a 229mm cartridge. 508mm long and holds a 305mm cartridge.
Cartridge options: Cartridge options:
• Model CF-609-2PLO, CF-609-10PLO, • Model CF-612-2PLO, CF-612-10PLO,
CF-609-25PLO Particulate Removal CF-612-25PLO Particulate Removal
• Model CC-21-7, CC-21B, • Model CC-22-7, CC-22B,
CC-21C Separator CC-22C Separator

Cartridge Model CF removes solid contaminants from liquid,

compressed air or natural gas.

Cartridge Model CC works as either an air/gas filter-separator

removing aerosol oil, water and solids from compressed air or
natural gas, or as a liquid phase separator removing water and
solids from petroleum based products.

34
Quick Opening Closures
PECOFacet Quick Opening Closures have no blind
flanges, a welcome benefit when frequent access to the
housing is required.

One person with standard wrenches can open and close

even the largest PECOFacet Quick Opening Closure.
Opening is as simple as venting the pressure, checking the
Pressure Warning Device (PWD), removing safety bolts and
turning draw bolts to disengage the two piece yoke. The
head then swings open easily. A trolley system, which bears
the weight of the yoke, assures the same quick, convenient
operation on larger closures.

Model QOC

CLOSURES & COALESCING PLATES

SafeLock 2 Closures
In applications where safety is paramount, or when quick
and frequent access to a housing is required, the SafeLock
2 Closure is the ideal solution.

The closure is easily opened by first removing the pressure

warning device to check for internal pressure. Once zero
internal pressure is confirmed, the EZYOpen® lever is
pulled down or pushed up by hand to its open position,
retracting the segment rings. Then, the closure lid is
simply pulled out and swung aside, granting access to the
housing or pipeline.

The SafeLock 2 Closure features the proprietary Accuralign

Model SLC 2 System to allow easy realignment of the swing arm
assembly in the field without having to rely on factory
field service technicians.

MPak® Coalescing Plates

PECOFacet’s patented MPak® coalescing plates are
designed to separate oil and solids from water, to limits
as low as 5 PPM, using the differences in their specific
gravities. They have integral molding that ensures the
spacing is accurately controlled while at the same time
promoting the transfer of solids to the bottom of the
installation. The plates can be assembled into packs which
are securely held together by molded polypropylene
supports with either stainless steel wires or rods.

35
 Field Inspection / Training
PECOFacet provides
information & training
on proper closure
World Headquarters inspection and
operation in the field
PECOFacet (US), Inc. as well as proper
P.O. Box 640 installation and removal
Mineral Wells, Texas 76068 of filter cartridges.

Phone: +011-940-325-2575
Fax: +011-940-325-4622

Oil & Gas Technology Center

Mineral Wells, Texas On-Site Testing
Scientific Process Solutions ®
For inquiries email to:
(SPS) offers contaminant
sales@pecofacet.com
measurement, monitoring,
analysis and consulting
services. On-site testing is
Visit our website to find:
performed by highly trained
• An office location near you personnel who provide
• Installing & Operation process related consulting and
Instructions support worldwide.
• Housing Registration Form
• Associated cartridge
information
• Most current literature editions

pecofacet.com

Laboratory Testing
PECOFacet laboratories provide identification and
characterization of contaminants from fluid samples
and spent cartridge analysis, as well as product QA and
validation testing.

Our laboratories contain advanced technology

testing equipment such as particle counters, 3-D imaging
microscopes and ISO test stands.

YOUR
©2015 PECOFacet
PECOFacet has a policy of continuous product
CONTAMINANT
research and development and reserves the right to
change design and specifications without notice. MANAGEMENT
OG-GP-SL-01 (PFMW 201503 A4) PARTNER SM

All trademarked or registered trademarked products in this catalog are the property of PECOFacet.
®
indicates a PECOFacet trademark registered in the USA and various other countries.