OWNER’S MANUAL

FULLY AUTOMATIC
WASHING MACHINE
AW-B1100GM CONTENTS

AW-B1000GM WARNING ............................................ 2

CAUTION.............................................. 3
AW-B1100GSE DESCRIPTION OF PARTS................... 3

AW-B1000GSE CONTROL PANEL

DESCRIPTION ............................. 4~5
RECOMMENDED DETERGENT
AMOUNT .......................................... 5
HOW TO OPERATE ......................... 6~7
PRESET MODE ................................... 7
SUPER SPIN DRY ............................... 8
RESUME FUNCTION .......................... 8
LID LOCK RELEASE............................ 9
CHILD PROOF MODE ......................... 9
TUB DRY CYCLE ............................... 10
CUSTOM WASH CYCLES ................. 11
OPTION MODE .................................. 12
LAUNDRY GUIDE .............................. 13
INSTALLATION ............................. 14~15
MAINTENANCE ........................... 16~17
BEFORE CALLING
THE SERVICEMAN .................. 18~19
HANDLING METHOD FOR
EMERGENCY ................................ 19

SPECIFICATIONS .............................. 19
Thank you for purchasing TOSHIBA Fully Automatic
Washing Machine.
Please read this manual carefully in order to
operate the machine properly and safety.
Please keep this manual for future reference.

6348207201
 WARNING
WARNING: This indicates an important item which incorrect operation may lead to injury or death.
x Never attempt to touch laundry in the spin basket until the motion of the basket
stops completely.
Laundry in the basket may bacame wrapped around the hand, even when the basket is only moving slowly.
DO NOT TOUCH
Use particular caution when children are present.

x Never operate washing machine by young children and infirm person.

This washing machine is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge unless they have been adequately supervised by a responsible
person to ensure that they can use the washing machine safety.
x Children should be supervised to ensure that they do not play with the washing machine.
OUT OF CHILD x Never allow children to look into the basket or play around the washing machine.
x Do not place the stand or box near the washing machine.

Children may fall into the basket and get injured or drowned.

x Never disassemble or modify the machine.

It may cause fire or electrical shock or malfunctions that lead to injuries. Consult the store you bought the machine.
DO NOT MODIFY

x Use proper power source indicated in the rating label of the machine.
It may cause fire or electrical shock.
ELECTRIC
SHOCK
Failure to use a proper power source may result in the electrical outlet becoming excessively hot, leading to fire.

x Unplug the power cord from the electrical outlet before attempting to cleaning or maintenance the
washing machine.
UNPLUG POWER

x Do not insert or pull the power plug with wet hands.

It may cause electrical shock or malfunctions that lead to injuries.
DO NOT
WET HAND

x Never use damaged electrical cords or plugs or loose socket.

ELECTRIC
It may cause electrical shock or malfunctions that lead to injuries or fire.
SHOCK

x Do not damage the power cord.

Do not attempt to damage, cut, or modify the power cord, or subject it to excessive bending, pulling, twisting, or binding. Also, do not yank
the metal portion, place heavy objects on the power cord, or pinch the power cord. Doing so may damage the power cord, resulting in fire
DO NOT or electrical shock.
DISASSEMBLE
AND REPAIR x If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a simillarly qualified
person in order to avoid a hazard.
x Do not install the washing machine in high humidity place.
x Do not install in a bathroom or in exposed area to the rain.
DO NOT USE Doing so may result in electrical shock or short circuit.
WET PLACE

x Do not allow water to come into direct contact with the various parts of the outer body.
DO NOT SPLASH
Doing so may result in electrical shock or short circuit.
WATER

x Do not place flammable materials in the basket.

Do not put any kerosene, gasoline, benzene, thinners, alcohol, other flammable materials, or the laundry soaked with such materials
AVOID
INFLAMMABLE
in the basket. It can cause explosion or fire.

x Wipe away off the dust or grime which attached to surface on pin of the plug.
REMOVE DUST
The dust or grime may cause fire.

x Do not place a fire source such as a candle or cigarette near the washing machine.
AVOID It may cause fire.
INFLAMMABLE

x Make sure that water drains properly.

INSTALL Using the washing machine with faulty drainage may cause water to back up within the machine, leading to electrical shock or fire.
CAREFULLY
 CAUTION
CAUTION: This indicates an important item which incorrect operation may lead to injury or damages to the product.

x Do not pull the power cord when unplug the appliance.

Hold the plug body to unplug. It may cause electrical shock or malfunctions that lead to injuries.
DO NOT PULL

x Do not connect to the hot water supply.

x Do not use water with temperatures over 50°C.
DO NOT USE Water that is too hot may cause malfunctions and deformation of the machine, which may result in electrical shock.
x Do not wash or spin extraction the mats, waterproof suites such as raincoats, fishing suite (jackets and pants)
ski suite, sleeping bags etc.
DO NOT WASH It will cause abnormal vibration and damage while in spin extracting.

x Do not climb or place heavy objects on the washing machine.

Doing so may result in injury due to bending or breakage.
DO NOT CLIMB

x Pull out the plug if you do not plan to use the machine for a long time.
Failure to do so may result in electrical shock or shorts due to deterioration of the insulation.
UNPLUG POWER

x Do not place the hands or other objects under the washing machine while in operation.
Moving parts may cause injury.
DANGER HAND

x Before use, make sure the faucet is open, and the connection with water inlet hose is not loose or
leakage water.
WATER LEAKAGE Looseness of hose nut, hose connections, water inlet valve or other areas may cause water leakage or other damage.

x The bottom ventilation of washing machine must not be obstructed by carpet when the washing
INSTALL
machine is installed on a carpet floor.
CAREFULLY

x During the spin extracting, if the spin basket does not stop rotation completely within 15 seconds after opened
STOP the lid. Please stop operated the washing machine immediately and contact to service dealer for repairing.
OPERATED

Softener case/ Detergent case (Preset mode)

Water inlet valve

Water inlet hose

 CONTROL PANEL DESCRIPTION
Control Panel of AW-B1100G and AW-B1000G.
AW-B1100G. Digital Display
AW-B1100G AW-B1000G. • After starting the operation
If the lid is open, the washer
will display the guided deter-
Water Level Indicator Progress Indicator gent amount.

• The set water level indicator is • The current washing process blinks • The amount of supply using t
flashing when the water has been and the remaining process lights up. accompanying the compact det
supplied and it will light up once • When power is turned on and a course
One
den
the water is at the set level. is selected, the washing time, the con
Automatic Mode number of rinsing process and the spinning
• The water level is set linearly by adjust- time are displayed.
Depending on the kind of d
of water consumption by one
ing to the washing volume. If the water
level is assigned at the point with no (Example) Washing Operation Adjust the detergent volume
particular indication, then the nearest WASH = 8 MIN. particular detergent in use.
level will light up. RINSE = 2 TIMES. • After the start of operation
• If there is some water in the wash tub SPIN = 5 MIN. If the lid is closed, the estimated
before the operation, the indicator at the
residual time to the end of wash
highest level will light up.
ing will be displayed.
Setting the button
• Reservation of the time to
• Press the button to choose the complete washing
water level. The indicator at the higher The preset hours are displayed
water level will light up.
• While the water is flowing into the • If an error occurs.
basket, the indicator at “WATER LEVEL” AW-B1000G. An error code will be displayed
will blink.

77L
CHILD PROOF Indicator
• When the “Child Proof” is selected, this
indicator will light up.
21L
“CONDENSED BUBBLE” Indicator
• The “CONDENSED BUBBLE” indicator will blink
when the washer starts the operation.

•
• • •
79L

• •
21L •

• • •

“WASH” “RINSE” “SPIN” Buttons “SUPER SPIN DRY” Button

• These buttons allow you to set a washing time, the • Timing drying operates based on selected time period.
number of rinsing process to be repeated and a spinning As soon as the button is pushed, the indicator will be on
time respectively. until the selected time period ends.

“DETERGENT” Indicator “PRESET” Button

• When this indicator light up, digital display shows • You can preset the time of all washing process.
the recommended detergent amount.

4
 RECOMMENDED DETERGENT AMOUNT
The content in () also apply to AW-B1000G.

isplay Unit
ation
Detergent
asher
deter-
Display 1.4 spoon of
the detergent
y using the measure spoon
mpact detergent is displayed. 79L (77L)
10.0 (9.0)
One spoonful of detergent
denotes about 55L of water
consumption
nd of detergents, amount 6.4 (6.2) 67L (66L)
n by one spoonful changes.
t volume according to the
n use.
ration
stimated
of wash- 2.8 (2.6) 47L (46L)

time to

isplayed.

0.5 (0.5) 21L (21L)

isplayed.

Course Indicator “LID LOCK” Indicator

• The indicator of the selected • While the lid lock operates, this indicator
washing course will light up. will light up.

• •
•
•
“OFF” “ON” Button
• Press this button to power on/off.
• • Power is automatically turned off about 15
• • seconds after the end of operation, or about 10
minutes later if the operation is not on.

“START/HOLD” Button
“TUB DRY” Button • Press this button to start the process.
• Press this button to evaporate the water from the • Press this button to hold the operation.
basket or to dry basket.
When “ ” light up, it means this program
will automatically operate after finish all “COURSE” Button
processes.
• When pressing this button, a lamp will light up.
Then select the program suitable with the
laundry.
5
 HOW TO OPERATE

1 Set drainage hose for draining.

2 Set the water inlet hose correctly.

3 Turn the water faucet on.

• Make sure that there are no sign of water leakage at water faucet
or/and water inlet valve.

4 Connect the power plug.

“REGULAR” “SPEED” “FRAGRANCE” “HEAVY WASH”

1 Turn the POWER .
• “REGULAR” and “CONDENSED BUBBLE” cycles will be selected
automatically.
CONDENSED BUBBLE
The washer starts flowing water at the low level to absorb the concen-
trated detergent into the laundry in order to remove the dirt efficiently.
64 3 5 1
2 Put the laundry in the wash tub.
“REGULAR” course • In case of selecting “SUPER SPIN DRY” cycle, please see page 8 for
Water level, water current and time are auto- details.
matically selected according to the quantity and If “SUPER SPIN DRY” selected, you cannot select “AUTO” TUB DRY.
type of laundry detected automatically.
Put the laundry evenly and confirmly. 3 Press the button to select “REGULAR” “HEAVY WASH” “SPEED ”
If it is not, the lower water level water may be set. “FRAGRANCE”.
Washing Operation : WASH = 8 MIN.
RINSE = 2 TIMES. 4 Press button then “AUTO” indicator light up, automatic “TUB DRY”
SPIN = 5 MIN.
is selected.
“SPEED” course
It is especially for light soiled clothes. It AUTOMATIC TUB DRY
washes with regular water current mode and This cycle operate by evaporate the water from basket in order to
shorter washing time. prevent mold. The program view automatically operate after finish
all process.
• DO NOT USE SOFTENER. Once Automatic “TUB DRY” is set, it is stored in memory no need to reset
Washing Operation : WASH = 4 MIN.
RINSE = 1 TIME. every time.
SPIN = 5 MIN.
“FRAGRANCE ” course 5 Press button.
This course is to maximize the effect of softener,
which results in perfumed feeling.
• The pulsator automatically detects the laundry amount, and indicates
the amount of concentrated detergent suitable for the laundry amount.
The method would be almost same as
“REGULAR” course. 6 Put in the detergent into detergent dispenser according to the detergent guide.
• SOFTENER MUST BE USED. • Please see “Digital Display Unit” on page 4-5 on the detergent guide.
(Refer to page 5,13) 7 Close the lid.
Washing Operation : WASH = 8 MIN. • If you keep the lid opening, the cycle will stop before spinning.
RINSE = 1 TIME,2 TIMES. • Avoid your finger caught when closing the lid.
SPIN = 5 MIN.
“HEAVY WASH” course Cycle end
It is especially for heavy soiled clothes. • The “beep” sound will be heard when spinning is finished.
It washes with stronger water current. • Always close lid after bring washed clothes out of the machine in order to
activate automatic “TUB DRY”.
Washing Operation : WASH = 8 MIN. • The “beep” sound will be heard when automatic “TUB DRY” is finished.
RINSE = 2 TIMES.
SPIN = 5 MIN. The power turn off automatically.

∗ If you add the laundry during washing, be sure to press button.

After stopping the basket, put the laundry in it.
∗ Lid Lock mode will operate and the lights up when the machine enters rinsing process (do not open the lid while the
lights up, doing so may damage the lid), please see page 9 for details.

6
 HOW TO OPERATE
“BLANKET”

(77L) 79L

(21L) 21L

Type and amount which may be washed. 2 5 1

Double size or less
(180 cm x 230 cm or less)
100% synthetic fiber 1 Turn the POWER .
Type: Mayer, Tuft, Down cloth
Weight: 5.0 kg or less (AW-B1100G)
4.2 kg or less (AW-B1000G)
• All wool blankets and regular electric blankets should NEVER be 2 Press the button and select
washed. “BLANKET”.
Washable electric blankets should be washed according to the washing
instruction given in the user’s manual that accompany them when
purchased. 3 Pour the liquid detergent 52 mL into the
• If the blanket will not go into washing net because of fiber length of detergent/bleach dispenser in the basket.
thickness, it can not be washed.
Folding blankets 4 Put a large item placed in the blanket
• Remove waste or thread from blanket.
• Fold the blanket in six lengthwise. washing net in the basket.
Fold it once again the same way.
Insert a blanket to the net 5 Close the lid and press the
• Roll up the blanket. button.
• Roll the blanket up loosely except
Mayer type blanket. Take the blanket out after washing
• Place the blanket into the blanket net
hem-side first, and close the fastener. completed.
Washing period may become longer with drainage
• Open the blanket net fastener and put at the
center of the blanket. Then take out the blanket
condition.
from net.

PRESET MODE
How to use preset mode
1 Turn the POWER and select button.
4Put the laundry in the basket and select your favorite or water level.
Set the custom wash cycle.
2 Press the button to preset the time.
• The displayed time can be changed from 2 to 12 hours by increasing
1 hour per press.
2 1-2 3 1-1
TO SET/RESET PRESET MODE 3 Press the button.

• Turn the POWER when you want to • Check if the faucet is on.
delete memory. If you wish to change preset 4 Put the detergent according to the detergent guide and then close the lid.
time, turn the POWER . And then set to DETERGENT (Powder) LIQUID DETERGENT
new preset time.
Pull the detergent case, then place Pour the liquid detergent into the
TO CONFIRM PRESET TIME the detergent evenly in the case. bleach dispenser.
• Display preset time when you open the lid or Then shut the case.

press the button.

• The finished times for the preset and the

actual times are different because of the
water pressure and the drainage condition.

7
 SUPER SPIN DRY

(77L) 79L

■ The amount of laundry/once of spin (21L) 21L

Less than 5.0 kg

■ Setting time for spinning
• You can manually set the time of spinning according to 3 2 4 1
the following guide:
If you would like to shorten the time of drying clothes in
the room: 45 min Select “SUPER SPIN DRY” from the
If you would like to almost dry the synthetic clothes: 90 min (WASH, RINSE, SPIN) cycle.
■ The clothes which cannot be performed spin drying 1 Turn the POWER and put the laundry in the wash tub.
“SUPER SPIN DRY” program will use a long time to
spin with high speed. Please do not spin the following
clothes:
2 Press the button to select the program.
• Easily color bleeding clothes • At the set of “BLANKET” “TUB CLEAN”
• Easily wrinkled clothes (e.g. blouse, 100% cottons, or you cannot select “SUPER SPIN DRY”.
shirts) • You cannot use “AUTO TUB DRY” if “SUPER SPIN
• Easily transformable clothes DRY” selected.
• Waterproofed clothes
Select “SUPER SPIN DRY” only. 3 Press the button and select the desired time.
• The “SUPER SPIN DRY” and “9 MIN” indicators will
1 Turn the POWER and put the laundry in the wash tub. light on and spinning time will display.
• LED display shown
2 Press button. 30 45 60 75 90
(off)

3 Press for select time. 4 Press the button.

• The “SUPER SPIN DRY” and “9 MIN” indicators will • The pulsator will operate before the water is let into
light on and spinning time will display. the wash tub. The washer will estimate the amount of
laundry and display the detergent amount (while the
30 45 60 75 90 lid is open).
(off)
5 Put the detergent as the display and close the lid.
• If the lid is open during the operation, the washer
4 Close the lid and press the button. will stop before rinsing and spinning.

After the end of operation, there will be “beep” sound. After the operation: the buzzer will beep when the washer
completes the operation.
• Turn off the faucet and clean the cassette filter.

RESUME FUNCTION (POWER FAILURE RECOVERY)

If the power supplies failure occurring while in operated, the washing
machine shall be memorized remains process. After the power
supplies are recovered, you can resume starting remain process by :
Press the button to switch on the machine.
Observation: A sound will be heard about 5 seconds then
course and remains process indicator will blink.
Press the button to start remain process.

2 1

8
 LID LOCK RELEASE
Do not force to open the lid, if it is locked. Please release it as.
L During the machine operation.
Press the button to release the lid.
L During the machine shut down.
Press the button to release the lid.
Remark: Please wait until the lights at indicator will off before open the lid.
(When the power is turned off or shut down during operation, the lid will be automatically locked.)
WARNING: Do not open the lid in this state/the lights up, doing so may damage the lid.

CHILD PROOF MODE (if you have small children)

This model is equipped with CHILD PROOF mode. After this mode is set to ON, the lid will be locked during operation. If you
find the accident such as children’s falling into the wash tub, please take necessary safety action urgently.
If there are small children who require attention, set this mode ON.
WARNING: Pay attention to small children. Do not leave the lid open. Do not leave the washer filled with water. Never allow
children to look into the basket or play around the washer. Do not place the stand or box etc. near the washer.

HOW TO SET CHILD PROOF MODE

Press the button, then the washing machine begins operating.
After that put in the detergent according to the detergent guide, then follow the instruction below.
Hold down the button, press the button once again.
• A buzzer will sound, the CHILD PROOF mode and lid lock indicator will be light up. ON

Once the CHILD PROOF mode is set, it is stored in memory.

Canceling the CHILD PROOF mode

Hold down the button, press the button once again.
• A buzzer will sound, the CHILD PROOF mode and lid lock indicator will be canceled.
OFF
(for rinse to spin cycle lid lock indicator cannot be canceled).
Once the CHILD PROOF mode can be canceled even during the operation.
L Cannot add detergent while the machine operates in child proof mode. The lid lock is activated.
L Open the lid while the machine is in lid lock mode can cause the accident and damage. The buzzer will sound and the
operation will stop, then water will be drianed.

9
 TUB DRY CYCLE
“TUB DRY” cycle can remove all drops of water left in the wash tub/spin basket in order to prevent mold.
You can select two modes of this cycle.

Automatic “TUB DRY” Manual “TUB DRY”

Automatically drying wash tub/spin basket Drying wash tub/spin basket only.
after finish automatic wash course. Do not put any clothes in wash tub/spin basket.

3 2 4 1 2 3 1

1 Turn the POWER put the laundry into the tub. 1 Turn the POWER .

2 Press button to select course. 2 Press button to select Manual “TUB DRY” cycle.
• Automatic “TUB DRY” cannot use with : “MANUAL” indicator will light up.
“SUPER SPIN DRY” mode. • Others course and mode cannot be select.
3 Press button to activate Automatic “TUB DRY”
cycle. 3 Close the lid and press button.
: “AUTO” indicator will light up. • Please check no cloth in wash tub/spin basket before
• Once Automatic “TUB DRY” is set, it is stored in close the lid.
memory no need to reset every time. When you • Drying tub cycle operate approximatly 30 min.
power on the machine next time, the “AUTO”
Finish Manual “TUB DRY” cycle
indicator will light up.
Automatic “TUB DRY” can be cancel by press
• The “beep” sound will be heard when operation is
finished.
button until “AUTO” and “MANUAL” lights out.
NOTICE
4 Close the lid and press button and follow
• The amount of mold in the wash tub/spin basket is
the usual operation until finishing process. less or much depend on the operation of the washer.
• If there is mold in the wash tub/spin basket, it
• The “beep” sound will be heard when spinning is
cannot easily removed by using “TUB DRY” cycle
finished.
once. Please use this mode one time or more in one
• Close the lid after take out all clothes from the wash
week. If mold occur, you should use “TUB
tub/spin basket.
CLEAN” course (P.17).
• Automatic “TUB DRY” cycle will be started after lid
closed 30 min. (the program will check to ensure that
tub is empty and lid is closed).
• Drying tub cycle operate approximatly 30 min.
• If you want to immediately activate Automatic
“TUB DRY”, press button after you take
out all clothes and close the lid.
If have any clothes in wash tub/spin basket or lid
open long time more than 30 min.
, automatic “TUB DRY” cycle will be cancel.

Finish Automatic “TUB DRY” cycle

• The “beep” sound will be heard when operation is
finished.

10
 CUSTOM WASH CYCLES
At first, the value for each cycle is the standard “REGULAR” “HEAVY WASH” course
setting. The user can change the time of washing, of
rinsing and of spinning on every cycle by pressing the
buttons. The cycle can be set as you desire, e.g. spin
only, reuse the washed water/detergent.
• When the washer start to operate from “RINSE”, the water
level will be at the highest.
• The settings for rinsing by pressing the button
Select “SPIN” : 1, 5, or 9 min.
• Static rinsing means water will be filled at the
appropriate level. Clothes will be stirred by the pulsator Select the number of rinsing process.
to clean detergent out, then water will be drained. Select the time of WASH: 4, 8, or 12 min.
• Shower rinsing means during filling water, the basket
will rotate in order to clean detergent out of clothes ■ The change for each conditions.
thoroughly, and water will be drained at the same time.
• Overflow rinsing means water will be filled at the
appropriate level and keep filling all the time. During 1 Open the lid and put the laundry in the basket.
draining, clothes stirred by the pulsator to clean And select the desired cycle.
detergent out at the same time.

Rinsing process of “REGULAR” 2 Set the custom wash cycle ( ).

PROGRESS INDICATOR PROCESS

Conditions Cycle Button
“1 TIME”
Static rinsing • Re-use the detergent.
• Melt the detergent WASH only
“1 TIME”, “OVERFLOW” Overflow
before use.
rinsing
• Re-use the washed WASH and
“2 TIMES” Shower rinsing
Static rinsing water. RINSE
(1 time)
• Wash clothes with
“2 TIMES”, “OVERFLOW” Shower rinsing Overflow different soil
(1 time) rinsing WASH and SPIN
separately and then
“1 TIME”, “2 TIMES” Shower rinsing spin all together.
Static rinsing Static rinsing
(1 time)
• Rinse the washed
“1 TIME”, “2 TIMES”, RINSE only
“OVERFLOW” Shower rinsing Overflow Overflow laundry only.
(1 time) rinsing rinsing (Spin before rinse.)
• Both rinse and spin. RINSE and SPIN
(Spin before rinse.)
Rinsing process of “HEAVY WASH”
• Select the desired WASH RINSE
cycle from washing to and SPIN
PROGRESS INDICATOR PROCESS
spinning.
“1 TIME”
Static rinsing
• Spin only. SPIN only
(Drain before spin.)
“1 TIME”, “OVERFLOW” Overflow
rinsing • Drain the water from
the wash tub. (Open
“2 TIMES” Shower rinsing DRAIN only
(2 time)
Static rinsing the lid. Press
after “E2-1” displays,
“2 TIMES”, “OVERFLOW” Shower rinsing Overflow
turn the power off.)
(2 time) rinsing

“1 TIME”, “2 TIMES” Shower rinsing

(2 time)
Static rinsing Static rinsing
3 Press the button.
“1 TIME”, “2 TIMES”,
Shower rinsing Overflow Overflow
“OVERFLOW”
(2 time) rinsing rinsing

■ If using with automatic “TUB DRY”, select “WASH”,

“RINSE” and “SPIN” or at least “RINSE” and “SPIN”
should be selected.

11
 OPTION MODE
If you wish to turn off the end buzzer sound
• You can turn off the buzzer sound by 1 Press the button and hold. Then press the

POWER button. After buzzer beeps 3 times,

the end buzzer disabled.
2 Follow this instruction when you want to reset to
Press and hold Press enable the buzzer.
* After you set the buzzer, the washer will keep the
setting in memory. So it is not necessary to reset
the buzzer every time.

If you wish to change the shower rinse to the static rinse

For the shower rinse, it needs twice for the process. But for the 1 Press button to turn on the washer.
static rinse, it needs only once.
Press
2 Press the button and hold for 3 seconds.
The buzzer sound will be heard and the course
will be set within 5 seconds. After that, turn off the
washer.
• Follow this instruction for the shower rinse, and
Press and hold for 3 seconds the buzzer sound will be heard.
• After the setting, the washer will keep the
setting in memory. So it is not necessary to
reset every time.

The contents in ( ) also apply to AW-B1000G.

If you feel the amount of water is less or much

Water level is automatically set
If you feel the amount of water is much. If you feel the amount of water is less.
to suit the amount of laundry. If
you feel the amount of water is
less or much, you can adjust it
as the following. Turn the POWER with pressing the button.

Adjust by pressing . Adjust by pressing .

Press twice. Press once. Press once. Press twice.
[Decrease approx. 10L] [Decrease approx. 5L] [Increase approx. 5L] [Increase approx. 10L]

(77L) 79L (77L) 79L (77L) 79L (77L) 79L (77L) 79L

(21L) 21L (21L) 21L (21L) 21L (21L) 21L (21L) 21L

Turn the POWER . [Finished adjusting]

* Set it once, it is written in memory. You don’t have to set it on each laundry.

12
 LAUNDRY GUIDE
When using detergent and bleach
Carefully read the directions given in the manual for In case of reserving washing, pour the bleach into the
the liquid detergent and bleaching agent and use them powder detergent part of the “Softener/Detergent (Preset)
correctly. case”.
Detergents and bleaches Chlorine-based bleaching agent
Load the detergent and Detergent/bleaching
• To use a chlorine-based bleaching agent, dilute it with
the bleaching agent directly into dispenser water three times as much. Load the bleaching agent into
the detergent/bleaching agent the wash tub by dissolving the bleach gradually using the
insertion slot dissolving both running water for washing.
little by little using the running • Avoid putting the bleach directly and also applying it
water for washing. directly to the laundry. These actions cause discoloration
and/or cloth damage.
NOTICE:
• Be careful not to spill the bleach onto the operating panel.
If you inadvertently spill the bleach, wipe it away at once.

When using softener

Carefully read the directions of the softener in order to • If the concentrated softener is used, dilute it with water one
use it correctly. third of its original concentration before pouring it into the
• Pour the softener into the Cap brim Cap insertion case. Weighting cap
softener case by Water
estimate its amount from
the detergent amount Water
display. Softener
NOTICE
• The softener will automati- Until here • Make sure to close the dispenser completely. Do not pour the
cally flow into the wash tub bleach on the upper part of the dispenser. If excessive bleach
during the final rinse. is used, then the whole bleach runs away inevitably.
Because of its tube-like structure, there may be the • Be careful not to spill the softener onto the operating panel.
dilute water remaining inside. This; however, is not If you inadvertently spill the finishing agent, with it away
abnormal. immediately.
• Do not leave the softener in the case for an extended
period. The finishing agent may become hard.

In case of water may freeze

Drain all water from the If the water is frozen under 40°C
basket, drainage hose 1 Remove the water supply hose and pour in warm water (under 40°C).
and water supply hose 2 Fill warm water (under 40°C) into the basket until the pulsator is
after using the machine. completely covered. Leave it for 30 minutes. Then check to see whether
the pulsator can be turned by hand.

Method of putting in clothes

L Put in larger clothes or buoyant ones first. Even articles labeled as washable by washing machine,
Buoyant clothes such as such as pillow, cushion and buffer, can not be washed by
• 100% chemical fiber material, like overall. this type of machine, because they can not be sufficiently
• 100% chemical fiber or blending fiber material, like immersed with detergent even press them after flowing
flannelette. water. Furthermore, clothes may fly out of the tub or failure
(Chemical fiber means polyester fiber, acrylic emulsion or will occur during spinning.
nylon fiber.) L Clothes need to be put in as evenly as possible and
fully pressed into the tub.
Put in the
fragile clothes
enclosed within
string bag at
last.
Put in larger
clothes such as
sports wear and
Put in lighter pajamas. Press them
clothes such as to a position
shirt and frock lower than
here. Put in heavier
clothes such as the marking line.
cotton-padded
trousers and jeans
wear first.

13
 INSTALLATION
Choosing an installation location
Install your washing machine in a level, stable place. Avoid place where the machine is
• It is dangerous to place the washing machine in an exposed to direct sunlight.
unstable location since it may move during vibration. • Plastic parts may become
• It will increase the sound produced by the machine when deformed or discolored.
it vibrates during use.

Avoid places where the machine may become frozen

during cold weather.
When you move washing machine,
hold the handles on the sides.
There are moving parts, electrical
parts and steel plates which may
cause electrical shock or injury.
• Never touch on the cabinet bottom by hands. Allow a space of at least 5 cm from the sides and rear
Never lift at the cabinet bottom by hands. of the machine to the nearest vertical object.
• When placed too near to walls
or other objects, the vibration Allow 5 cm
When the machine is covered. of the machine during operation
Do not use the cover made of chloric vinyl. Sometimes it may cause them to shake.
damages plastic parts and painted surface. When you use
the cover made of chloric vinyl, put the cloth between the
machine and the cover.

Leveling the washing machine

Adjust the leg so that body of your washing machine keep flat. (The one leg is adjustable.)

1. After loosening the leg nut, adjust the leg to 3. A weight attached to a string may be used to
the proper height by turning it. Then tighten check to ensure that your washing machine is flat.
the leg nuts securely once again. The difference of the distance between A and B
should be less then 1 cm.
A-B or B-A 1 cm.
Leg nut
Loosen Tighten

Leg
Raise Lower

2. When the leg height is difficult to adjust because String

of floor slope or unevenness, place a board of
sufficient thickness to prevent breakage under
the affected legs to allow adjustment to a level position.

Check the distance.

Installing the bottom cover

1 Push the cover into the washing machine from the 2 Tighten screws at 2 positions.
backside.
Back side

Back side

Screw Screw

14
 Installing the ground pin
• The ground pin in the plug should be connected to the proper point of the socket for grounding.

Installing the drainage hose

Moving the hook Drainage hose extension
• When inserting the drainage hose into a wash pan or onto a • Pay close attention to the height of the drainage hose and
drain pipe, the hook may be moved to facilitate the installation. articles over which it passes. If the drainage hose is too high,
• When hooking the hose hook into the proper drainage may not be obtained.
slot provided on the body of your • The length of the drainage hose 3 m or less
washing machine, move the hook may be extended to as much
back to its initial position. as 3 m if kept the same level.
• Insert the drainage hose in as far as Drainage hose Hook Drainage hose cap
it will go, then use the accessory Drain outlet
Caution:
hose band to secure it tightly. • If the level of the threshold and the 15 cm or less
• Secure the hose tightly. An improperly Hose-band drainage hose is high, the washing
secured hose may cause leakage. machine may not be drained.
• Lock hose band distance to cabinet 10 mm • Be careful not to rub the drainage hose. Do not insert the
about 10 mm as figure. Drainage hose drainage hose under the washing machine. They may be
• When attaching the drainage hose to a wash damaged the drainage hose.
pan, etc., either leave a gap between the end 3 cm or Drainage hole Concrete block
of the hose and the adjacent surface, or cut Gap greater
the hose diagonally to ensure proper drainage.
※ Allowing the flat end of the hose to come in
contact with the flat surface of the washing Drainage hose
machine will impair drainage. Cut diagonally

Attaching the water inlet hose to the faucet

If you attach the water inlet hose completely, it may cause a water leakage.
Branching
Faucet shape Wall-mounted faucets are best. Caution water pipe
• The old inlet hose should not be reused.
Wall-mounted Square Movable Multi-home • If the faucets are not suited, please contact your dealer.
shaped faucet faucet faucet
• Do not connect the hot water supplying convenience.
• In order to provide a permanent source of water
for your washing machine, it is suggested
The distance is needed that a branching water pipe (available separately) Hose union
1.6 cm or more be used.
Attaching the hose union Hose Union 5 Remove the seal from the union Ring
1 Push the lock lever of the water and turn to the arrow destination
supply hose. Pulling the sleeve down, the nozzle to tighten securely.
lower the entire hose to disconnect the 6 Check the gap is approx. 1 to Approx.
hose union. Lock
lever 3 mm between the nozzle and 1 to 3 mm
2 Check the diameter of the faucet. Sleeve
Water the ring. Nozzle
When the faucet mouth is large,
loose the screws and remove the
inlet
hose
• If the gap is wide, it may cause the water leak.
inside ring to facilitate, attachment. • If it cause the water leakage during operation,
3 Loose 4 screws of the hose union, Inside tighten the nozzle more securely.
push the hose union to the water ring Caution
faucet. Ring • If you attach the hose union again because of
4 Tighten the four screws evenly around moving house etc., loose the gap is approx. 4 mm
the faucet. In this time check the gap Approx. between the nozzle and the
is approx. 4 mm between the nozzle 4 mm. ring. Then attach it according
and the ring. above methods. They are Approx.
preventable the water leakage. 4 mm
Connecting the water inlet hose Joint
1 Pull the sleeve down, then insert seal
Caution:
the water inlet hose. 4 Tighten the hose nut • Check to ensure that the water
2 Separate the sleeve until a click is on the end of the water inlet hose is properly installed by
heard, then push it up. Nozzle inlet hose securely to
turning the water on and checking
3 Check to ensure that the lock the water inlet valve. for leakage.
lever is hung on the nozzle. Next, If there is leakage, connect it from the
Hose nut Inlet hose
check to ensure that the water Sleeve first.
supply hose does not come off by • If you remove the water inlet
pulling down on it. hose after supplying water, water
Lock
may splash. Refer to the following
lever — “Removing the water inlet hose”.
Water inlet valve

15
 MAINTENANCE
Cassette filter
Clean the cassette filter at the end of operation.
Cassette filter
L How to remove L How to set in
Hold the upper side of the cassette filter, and push down Hold the filter case with its top side up. Put the lower side
and pull it at the same time. of the filter case in the filter stand, and then push it until a
“click” sound is heard.

Filter slot

Cassette filter Cassette filter

Filter cover
L How to remove L How to set in
Turn over the filter, and then slide the filter case in the arrow 1 Set the filter case to the filter cover as follows.
direction of the following figure (1) to remove it (2). 2 Press down the filter cover case until a “click” sound is heard.
Clean inside the filter cover and the filter case. Filter case

Filter cover

Filter cover
L When the filter valve inside the filter cover is
Filter case loosened
If the filter valve is loosened, lint may not be collected.
1 Set the filter valve to the filter case while aligning its
concavity and convexity to those of the filter case.

Filter valve
When it is difficult to remove the filter case due to lint
attached, wet it with water to soften the lint. Filter cover
Concavity Convexity
Filter case
2 Insert the groove of the filter valve to the click at the
center of the filter cover.
Groove

Click

Detergent/Bleach dispenser
Wipe or Wash out any remaining detergent.
If there is any remaining detergent hard to be removed, use the “TUB CLEAN” course.
• Before put detergent or bleach to in the detergent/bleach dispenser, remove water in its inlet.
With any remaining water, detergent may be hardened and attached.

Softener case /Detergent case (Preset mode)

Remove the case to clean it. In addition, wipe away any dirt from the water inlet valve.
Removing the case Remounting procedure
1 Removal procedure; 1 Mount the cap of the insertion case. If the washing machine
Pull the detergent/softener case toward you, then lift it for operates without the cap in place, the softener does not
removal. enter.
2 Lift the case obliquely in the same way as you remove it,
Cap and insert it deeply along the guides.

Cap Guides

2 Remove the cap of the detergent/softener case.

3 Clean the case by water. Wipe the insertion case by wet cloth.

16
 Cleaning the tub

“TUBCLEAN” course
The dirt from clothes or wastewater on the wash/
spin basket will cause the smell or the problem of
water draining. Such dirt from the washing pro-
cess will then make the laundry dirty. If you are in
such case, please use “TUBCLEAN” course
twice a month. Or in case the clothes have been
starched, please use the “TUBCLEAN” program to 2 1
remove the dirt of the starch from the basket.
“TUBCLEAN” Process 1 Turn the POWER .

Water intake/Stir ( 1) about 11 min 2 Press the button and select “TUBCLEAN”.

Soak about 20 min 3 Press the button.

Wash about 3 min

• No indicator. All indicator will light off.

Drain/Spin ( 2) about 3 min 4 When the pulsator (spinning board) starts to spin, add
the chlorine-type whitening detergent about 300 ml. to
Water intake/Stir ( 1) about 11 min the basket.
• Add it at the first used water.
Rinse about 3 min
• Do not put any clothes in the basket during the
“TUBCLEAN” program.
Drain/Spin ( 2) about 3 min 5 Close the lid.
1 The pulsator stirs while the water level
• If the lid is opened during the operation, the operation will
stop before the draining and rinsing process.
increases gradually.
2 The water spins while draining out.
Finish “TUBCLEAN” process.
• Do not use “TUBCLEAN” program continuously. • Beeping when the operation is finished.

If the filling water becomes not good

The water inlet valve may be clogged by lees or grimes. Removing the water inlet hose
a You should remove inlet hose 1 Turn off the water faucet.
Inlet hose
and clean valve filter by brush. 2 Press the button to switch on the washing
Valve filter
a If you remove the water supply Hose nut
machine then press the button.
carelessly, water may splash.
Therefore, use the following 3 After water level indicator will light up,
procedure. Water inlet valve
press the button.
4 Loosen the hose nut and then remove inlet hose.

Washing machine body and panel

Before performing any maintenance on your washing machine, be sure to remove the electrical plug from its power source.
The main body and control panel may be cleaned by wiping with a soft cloth soaked in water.
(Hard-to-remove dirt may be cleaned by wiping with a soft cloth soaked in a mind detergent.)
Caution: Never clean the body or control panel with benzine, thinner, cleanser, or other chemical cleaners. Use of such
chemicals can discolor or damage parts.

If the stainless basket rust for external reasons

Please clean the rust by a sponge or a soft cloth with a cream cleaner.
* Do not use metallic brush because the body may scratch and easily rust.
■ Stainless rust
The stainless basket usually prevents the rust.
However, there is possible to have it. Please • Do not put the metallic objects into the machine, e.g. Hair clip.
follow the recommendation below to prevent • After draining the water, the rusted water will be drained. This
rust. will caused the accumulated rust inside the washing machine.
Clean it again with clean water.

17
 BEFORE CALLING THE SERVICEMAN
WHEN CHECK TREATMENT
does not operate • Is there a power outage? Please confirm whether a power failure or
• Is the circuit breaker or fuses cut off? fuse breaker is cut. Then draw out power
• Is the machine’s plug properly inserted into supply plug, insert once again and turn the
an AC socket? power switch on.
• Is the power switch ON?
making noise • Is there the inclination of the laundry? Please correct the inclination or non stability
• Is your washing machine installed on an of laundry in the washing machine.
inclined or uneven surface?
• Are there match sticks, hairpins or metal Remove them.
objects being washed with the laundry?

water leak • Is the faucet shape suited? Adjust the inside ring of the hose union or
change faucet shape (Refer to p. 15)
• Are the hose coupling and the nozzle loose? Re-attaching the water (Refer to p. 15)
• Is the hose nut loose? Re-attaching the water supply hose (Refer
• Is the water supply hose connector clogged? to p. 15)

does not beep the

• If you turn the power on and press Reset the end buzzer sound to turn on refer-
button immediately, it may not beep the end ring to “If you wish to turn off the end buzzer
end buzzer buzzer. sound. (p. 12)”
• Is the end buzzer turned off?

Error Indication List

In the case the buzzer sounds and the display indicates as shown below.

DISPLAY CHECK TREATMENT

About the drainage hose • After checking, open and
• Is the hose mounted correctly? close the lid once. Press the
• Is the hose routed horizontally?
• Is the hose frozen? A button.
• Is the hose damaged? Is the end exposed to water?
• Is the drainage hose clogged?

• Is the lid open? A• Close the lid.

• Is the lid lock stuck with any foreign materials?

• Is the lid completely closed? A• Turn the power off for checking,
• Is the lid completely locked? and then restart the machine.

• Is the laundry loaded evenly?

• Is the laundry unstable or placed on an incline
floor?
Display interchangeably A• Correct the load status of the
laundry and the backlash of the
• Are there any symptoms occurring that are simi- machine, then close the lid.
lar to those of ?

Display interchangeably See the section of above. A

• Is the faucet closed?
• Is the water pipe frozen or the water service
interrupted?
• After checking, open and
• Is the water filter/lint collector at the supply port
clogged with dirt? If the flow rate of the water is A close the lid once, press the
as low as about 0.5L or less per minute, “E5” will button.
be displayed.

If the problem is not solved despite checking, unplug the power plug and request repair.
18
The following are not malfunctions.

When: Check:
The first time you use your washing machine, • This is merely water lift over from the performance inspection performed
a small amount of water may drain out of the on your washing machine before it was shipped from the factory.
drainage hose.
During operation the control panel gets warm. • Because of the electronic parts radiate heat.
The pulsator rotates a little bit. • Because of preventing the laundry unbalancing, it rotates a little bit.
During washing and rinsing, lamps flickers. • It is the cause of the power source wiring in a house. If fluorescence light
be changed, it may improve condition.
During spinning, suddenly supplying the • Because load unbalance occurred and safety switch operated. The
water or rinsing. spin will cycle resume after supplying water, rotating and correcting the
unbalanced load.

Sloshing sounds of remaining water coming • They are made by water retained by the machine for the purpose of
from your washing machine after SPIN cycle maintaining balance and do not indicate malfunction.
has been completed.
After pausing the machine during the spin • There are a short pause before the machine begins to spin as the
cycle, it will not starts immediately. drainage valve opens sufficienty.
If operates the machine at spinning on and • You may hear intermittent motor sound (“coon” sound) in spinning
off. process occurs, this is a sound which occurs in order to control rotation,
and not a malfunction.

Cannot open the lid during the rinsing and • This is the prevention measure to prevent the user from sticking his hand
spinning process. into the basket
After water supply shut off or water with iron • Wait for water becomes clean. Returning type bleach can be used
rust appears. (hydrohiter etc.) when iron rust adhered to the white colored clothes. Avoid
using the bleach for colored articles.

The buzzer does not stop. • If the CHILD PROOF mode is set to ON, and the lid is opened while the
machine is in operation, the buzzer beeps. Check inside the washing
machine. Press to turn it off.

HANDLING METHOD FOR EMERGENCY

When the machine takes on abnormal operation, please disconnect the power plug and send it to our service agency for handling.
Never disassemble the machine by yourself, for safety reasons.

The content in () also apply to AW-B1000G.

Type Fully automatic washing machine Maximum water pressure 1.00 MPa
Washing system Vortex system Minimum water pressure 0.03 MPa
Rated voltage 230-240V~ Quantity of water 79 L (77 L)
Frequency 50 Hz Quantity of used water 165 L (161 L)
Dimension [WxDxH]mm 645 x 620 x 1031 Operation time [Wash only] 12 min
Rated capacity [Dry Clothes Weight] 10.0 kg (9.0 kg) Operation time [Regular cycle] 51 min
Maximum rated power input 530W (520W) IP Number IPX4
Net weight 39 kg Class of appliance Class I

19
MANUFACTURED BY
TOSHIBA CONSUMER PRODUCTS (THAILAND) CO., LTD. MADE IN THAILAND