7 Contoh SK Gty

Print Server Application Guide
REV: 1.2.0
1910010820
This manual downloaded from http://www.manualowl.com

CONTENTS
Chapter 1. Overview ...................................................................................................................... 1
Chapter 2. Before Installation....................................................................................................... 2
Chapter 3. Installation for Windows OS ...................................................................................... 3
Chapter 4. Application for Windows OS ..................................................................................... 7
4.1 To Launch/Exit the TP-LINK USB Printer Controller …………………………………………..……...7
4.2 To Utilize the TP-LINK USB Printer Controller …………………………………………………………..8
4.2.1 To Print .................................................................................................................................... 8
4.2.2 To Scan ..................................................................................................................................11
4.2.3 Other functions/ settings ........................................................................................................ 17
Chapter 5. Installation for Mac OS ............................................................................................. 19
Chapter 6. Application for Mac OS ............................................................................................ 21
6.1 To Launch/Exit the TP-LINK USB Printer Controller …………………………………………..…….21
6.2 To Utilize the TP-LINK USB Printer Controller ………………………………………………………...22
6.2.1 To Print .................................................................................................................................. 22
6.2.2 To Scan ................................................................................................................................. 25
6.2.3 Other functions/ settings ........................................................................................................ 31
Appendix: Troubleshooting .......................................................................................................... 33

Overview
Chapter 1. Overview
Print server is a function embedded in your Router. It allows you to share your printer with computers that are
connected to the Router.
Typical Topology
 Note:
(1) The client utility TP-LINK USB Printer Controller supports Windows 8 32/64 bit, Windows 7 32/64 bit,
Windows Vista 32/64bit, Windows XP 32/64bit, and Mac.
(2) Before connection, please check the Printer Compatibility List to verify whether your printer is supported
by the Router. You can refer to Appendix: Troubleshooting for downloading the Printer Compatibility List.
(3) Here in this guide, we take the configuration procedures of TL-WDR4300 for example.
-1-
Before Installation
Chapter 2. Before Installation

Before installing the print server, please note the following points:
 Make sure you have already installed the printer’s driver on your computer. Otherwise, please install it first.
 Any computer in your LAN must first install the software if it wants to share the print server via the Router.
Before installing the print server, make sure you have the following devices and accessories:
 TP-LINK Router with USB port which supports print server function
 USB printer and USB cable
 Computer with Windows XP/ Windows Vista/ Windows 7/ Windows 8/ Mac
 Note:
For Mac or Windows computers that do not have CD-ROM drive to run the resource CD, please download
the relevant software from our website: www.tp-link.com. Please refer to Appendix: Troubleshooting for
this.
-2-
Installation for Windows OS
Chapter 3. Installation for Windows OS

1. Insert the Router’s Resource CD into the 3. Click START.
CD-ROM drive.
2. Select your Router model and click USB 4. Connect your computer and printer to the
Printer Setup. Router step by step as instructed. Click
NEXT.
-3-
5. Check the LED lights and click NEXT. 7. Please wait a moment for the installation
preparation.
6. Click NEXT to start installing the printer 8. Click Next and go on to install the TP-LINK
share software. USB Printer Controller.
-4-
9. Please enter your information in the requested 11. Click Install to begin the installation.
field and then click Next.
10. Click Change… to select another destination 12. Please wait a while for the installation
folder, or leave it default and click Next. process.
-5-
13. Click Finish to complete and exit the
InstallShield Wizard.
When the installation is completed, the

TP-LINK USB Printer Controller will pop up,
with whose help you can print documents
via the Router now.
 Note:
In your LAN, each computer that wants to share the print server should also install the TP-LINK USB Printer
Controller. Please follow the previous steps to configure other computers in your LAN.
-6-
Application for Windows OS
Chapter 4. Application for Windows OS

TP-LINK USB Printer Controller is used to operate the USB Printer on your own computer. After successful
installation, the icon will appear on the desktop of your computer.
4.1 To Launch/Exit the TP-LINK USB Printer Controller

 To launch the USB Printer Controller, double-click the icon on your desktop.
 To exit the USB Printer Controller, you have two ways:
 Click System->Exit on the TP-Link USB Printer Controller.
 Right-click the icon in the lower-right corner of your screen and then click Exit.
-7-
4.2 To Utilize the TP-LINK USB Printer Controller

4.2.1 To Print
To print, first of all, you need to set your Auto-Connect Printer. After successful setting, you can execute your
printing tasks automatically.
Please follow the steps below to set your auto-connect printer.
Step 1: Highlight the printer you want to set

as auto-connect printer.
Step 2: Click the inverse triangle mark on

the Auto-Connect for printing tab
to pull down the list, where you can
select Set Auto-Connect Printer.
-8-
Step 3: Tick the name of the printer you

would like to set as auto-connect
printer, and then click Apply.
After successful setting, you will see the printer marked as Auto-Connect Printer. Then you can execute your
printing task freely.
-9-
 If you want to disable your printer's auto-connect function, you can delete it.
Method One:
Select Delete Auto-Connect Printer
from the drop-down list of the
Auto-Connect for Printing tab.
Method Two:
1. Go to Tools->Auto-Connect Printer List.
2. Highlight your auto-connect printer and then

click Delete.
-10-
4.2.2 To Scan
There are two methods available to realize the scanning function.
Method One: Network Scanner

Step 1: Highlight your scanner or MFP.
Step 2: Click Tools and then select

Network Scanner.
-11-
Step 3: Select the type of picture you

want to scan, and then click Scan.
Step 4: Name the image set, select the file

format, and choose the file
destination by clicking Browse…
or leave it default. Then click Next.
-12-
Step 5: Wait a while for the scan process.
Step 6: When it is 100% processed and

saved, please click Close to
complete it.
Then go to the location you’ve
chosen in the previous Step 4
and find your picture scanned.
-13-
Method Two: Connect for Scanning
 Note:
If you choose this method for scanning, no one else in your LAN can share the scanner or MFP to either print or
scan, until you click the tab Disconnect for Scanning to release it or accept their Request to Connect.
Step 2: Click the tab Connect for Scanning.
Successfully set and ready for scanning,

it will display Manually Connected by…,
when you can start your scanning task.
-14-
Step 3: After finishing your scanning task,

please do remember to click the
tab Disconnect for Scanning
to release the scanner or MFP.
 Request to Connect
When one computer in you LAN Connects for Scanning, it is occupying the scanner or MFP; then if you would
like to use the printer as well, you will have to Request for Connect.
Step 1: Highlight the scanner or MFP you

want to share for printing or scanning.
Step 2: Click the tab Request to Connect.
-15-
Step 3: You will be prompted a window

that transmits your request.
Please wait patiently for the reply.
Step 4: If the other user Accepts your

request to connect, please click
Exit to start your printing or
scanning task.
-16-
4.2.3 Other functions/ settings
 Configuration
Go to Tools-> Configuration, tick the option Automatically execute when logging on Windows, and then
click OK.
With this setting, the TP-LINK USB Printer Controller will run automatically every time you log on your computer.
 About
Go to About -> About, a window will pop up and display some relevant information about this Control Center.
-17-
 Configure Server
Highlight the Router and click the tab Configure Server; the login window of the Router will pop up. You need to
enter the user name and password (both are admin by default.) to log in the web-based management page of
the Router.
-18-
Installation for Mac OS
Chapter 5. Installation for Mac OS

1. Download the setup software TP-Link
UDS Printer Controller Installer.dmg
from our website: www.tp-link.com.
2. Double-click the software you’ve

downloaded.
3. Double-click the TP-Link UDS Printer

Controller Installer.app in the window
that pops up.
-19-
Installation for Mac OS
4. Click Install to start the installation

process.
5. Click Restart to finish the software

installation.
-20-
Application for Mac OS
Chapter 6. Application for Mac OS

6.1 To Launch/Exit the TP-LINK USB Printer Controller
 To launch the USB Printer Controller, double-click the icon on your desktop.
 To exit the USB Printer Controller, you have two ways:
 Click TP-Link USB Printer Controller -> Quit, when the printer controller is on the process. Or you can
press the keyboard command + Q to quickly exit the controller.
 Left-click and hold the icon in the dock for a while, then you can click Quit to exit the controller.
-21-
6.2 To Utilize the TP-LINK USB Printer Controller

6.2.1 To Print
To print, first of all, you need to set your Auto-Connect Printer. After successful setting, you can execute your
printing tasks automatically.
Please follow the steps below to set your auto-connect printer.
Step 1: Highlight your printer.
Step 2: Click the tab Auto-Connect for

printing to pull down a list, where
you can select Set Auto-Connect
Printer.
-22-
Step 3: Select the printer you would like to

set as auto-connect printer, and
then click the Apply button.
After successful setting, you will see the printer marked as Auto-Connect Printer. Then you can execute your
printing task freely.
-23-
 If you want to disable your printer's auto-connect function, you can delete it.
Method One:
Select Delete Auto-Connect Printer from

the drop-down list of the tab Auto-Connect
for Printing.
Method Two:
1. Go to Tools->Auto-Connect Printer List.
-24-
2. Highlight your auto-connect printer and

then click Delete.
6.2.2 To Scan
There are two methods available to realize the scanning function.
Method One: Network Scanner

-25-
Step 2: Click Tools and then select

Network Scanner.
Step 3: Select the kind of picture you want

to scan and the destination you
want to save it; name your picture
and select the format of it.
Then click Scan.
-26-
Step 4: Wait a while for the scan process.
Step 5: When it is completed, you will see

the scan result shown in the middle.
Then go to the location you’ve

chosen in the previous Step 3 and
find your picture scanned.
-27-
Method Two: Connect for Scanning
 Note:
If you choose this method for scanning, no one else in your LAN can share the scanner or MFP to either print or
scan, until you click the tab Disconnect for Scanning to release it or accept their Request to Connect.
Step 2: Click the tab Connect for Scanning.
Successfully set and ready for scanning,

it will display Manually Connected by…,
when you can start your scan task.
-28-
Step 3: After finishing your scan task,

please do remember to click the
tab Disconnect for Scanning to
release the scanner or MFP.
 Request to Connect
When one computer in you LAN Connects for Scanning, it is occupying the scanner or MFP; then if you would
like to use it as well, you will have to Request for Connect.
Step 1: Highlight the scanner or MFP you

want to share for printing or scanning.
Step 2: Click the tab Request to Connect.
-29-
Step 3: You will be prompted a window

that transmits your request.
Please wait patiently for the reply.
Step 4: If the other user Accepts your

request to connect, please click
Close to start your printing or
scanning task.
-30-
6.2.3 Other functions/ settings
 About
Go to TP-Link USB Printer Controller -> About; a window will pop up and display some relevant information
about this printer controller.
 Configure Server
Highlight the Router and click the tab Configure Server, the login window of the Router will pop up. You need to
enter the user name and password (both are admin by default.) to log in the web-based management page of
the Router.
-31-
 Open at Login
Left-click and hold the icon in the dock for a while, until you can select Option > Open at Login.
With this setting, the TP-LINK USB Printer Controller will run automatically every time you log on your Mac.
-32-
Troubleshooting
Appendix: Troubleshooting
1. Where can I find the printer compatibility list?
Go to our website www.tp-link.com, then go to Products ->Wireless, find your product model and go to
Download -> Document -> Printer Compatibility List.
-33-
Troubleshooting
2. Where can I find the relevant software for installation?
Go to our website www.tp-link.com, then go to Products ->Wireless, find your product model and go to
Download ->Software -> Utility. Then next web page will be loaded, where you can select the USB Printer
Controller_Utility and download it.
-34-
Troubleshooting
-35-
Troubleshooting
3. How to manage the print server on the web-based management page?

The Router’s Print Server function is enabled by default. To disable the function, you need to log onto the
Web-based management page. See the following instructions (Here takes that in Windows 7 for example):
1） Make sure you have a PC or notebook connected to the wireless Router, either via wireless or wired
connection.
2） Launch the TP-LINK USB Printer

Controller, highlight the Router and
click the tab Configure Server.
-36-
Troubleshooting
3） After a moment, a login window will

appear. Enter admin (in lower case
letters) for both the User Name and
Password. Then click the OK button
or press the Enter key.
-37-
Troubleshooting
4) Go to USB Settings -> Print Server. Clicking Stop will disable the function and clicking Start will enable it.
-38-

7 Contoh SK Gty

Uploaded by

Copyright:

Available Formats

7 Contoh SK Gty

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

7 Contoh SK Gty

Uploaded by

Copyright:

Available Formats

Print Server Application Guide

This manual downloaded from http://www.manualowl.com

This manual downloaded from http://www.manualowl.com

Chapter 2. Before Installation

 USB printer and USB cable

 Computer with Windows XP/ Windows Vista/ Windows 7/ Windows 8/ Mac

Chapter 3. Installation for Windows OS

When the installation is completed, the

Chapter 4. Application for Windows OS

4.1 To Launch/Exit the TP-LINK USB Printer Controller

4.2 To Utilize the TP-LINK USB Printer Controller

Please follow the steps below to set your auto-connect printer.

Step 1: Highlight the printer you want to set

Step 2: Click the inverse triangle mark on

Step 3: Tick the name of the printer you

2. Highlight your auto-connect printer and then

There are two methods available to realize the scanning function.

Method One: Network Scanner

Step 2: Click Tools and then select

Step 3: Select the type of picture you

Step 4: Name the image set, select the file

Step 5: Wait a while for the scan process.

Step 6: When it is 100% processed and

Method Two: Connect for Scanning

Step 1: Highlight your scanner or MFP.

Step 2: Click the tab Connect for Scanning.

Successfully set and ready for scanning,

Step 3: After finishing your scanning task,

Step 1: Highlight the scanner or MFP you

Step 2: Click the tab Request to Connect.

Step 3: You will be prompted a window

Step 4: If the other user Accepts your

4.2.3 Other functions/ settings

Chapter 5. Installation for Mac OS

2. Double-click the software you’ve

3. Double-click the TP-Link UDS Printer

4. Click Install to start the installation

5. Click Restart to finish the software

Chapter 6. Application for Mac OS

6.2 To Utilize the TP-LINK USB Printer Controller

Please follow the steps below to set your auto-connect printer.

Step 1: Highlight your printer.

Step 2: Click the tab Auto-Connect for

Step 3: Select the printer you would like to

Select Delete Auto-Connect Printer from

2. Highlight your auto-connect printer and

There are two methods available to realize the scanning function.

Method One: Network Scanner

Step 2: Click Tools and then select

Step 3: Select the kind of picture you want

Step 4: Wait a while for the scan process.

Step 5: When it is completed, you will see

Then go to the location you’ve

Method Two: Connect for Scanning

Step 1: Highlight your scanner or MFP.

Step 2: Click the tab Connect for Scanning.

Successfully set and ready for scanning,

Step 3: After finishing your scan task,