QMS-PL-002(0

CERTIFICATE OF CON FORMITY REVISION 10: SEPT 2017

Certificate No. 0917-O27213

Customer Sino Gulf Energy Enterprises

Customer PO No. 9GEEIPOao4121

Delivery Note No 0917-0272

MPW No. 0917-027213
Date 23-Sep-17

gT o > I
Serial No. Mfg. Order No. Quantity Product Code Description of Goods
ToTqAVANGER Reamer Body, 3-Point for
DEP-17-0803 17-04024 1 TABl 22SS822G0-864P63 12-1/4" Family, Steel, Neck OD 8-1/4",
ID 2-13/16", 6-5/8 Res Pin x Box

I hereby certify that the items or material covered by this document have been inspected and tested and conform to the
approved specifications relative thereto. This is substantiated either by my own inspection, or by satisfactory
documentary evidence from the original source of supply. All pertinent data is on file, available for review upon request.

The material was selected and manufactured according to standards specified in API Spec 7-1 & API SpecT-2.

.#'

r
& Date:
/"

#Frsc'j:

Tercel Oilfield Ptoducts Middle East -JAFZ RA08-FE05, P.O. 4ox 17763, Dubai UAE Tel: +971 4 8832646/56

RUBItrtrN
!ILIIUI,O IN'LTNAIIUNAL
Page 1
 QMS-PL-002(g)
MAN UFACTURER PRODUCT WARRANTY REVISION 6:AUGUST 2016

MPW-097 7-0272-3

Tercel Oilfield Products Middle East hereby warrants against defects arising from low steel

quality, workmanship, assembly and component endurance to standard oilfield conditions.

This warranty does not cover normal wear and tear typical of oilfield conditions arising from

standard operations in oil and gas wells and does not cover tool damage arising from

transportation or otherwise adverse conditions or mechanical shocks outside the control of

the manufacturer.
Normal wear and tear is defined as:
. Tool body wear as a result of abrasion & friction with formations.
' Thread galling and/or thread cracks due to standard drilling conditions.
. Connection shoulder damage due to standard torque application.
. Damage caused by Reamer following bits that are 1/2" or more under gauge or bit
catastrophic failure.

Defects covered under this warranty also include

. Tool body cracks.
. Deep cracks in or near the Cutter pocket area.

This warranty is valid for six (6) months from the date of shipping ex-Jebel Ali facilities, first

run in standard oil, or gas well whichever expires first.

The Manufacturer undertakes, throughout the validity of this warranty, to replace the

defective product or repair it to a condition that renders it fully operational as per the product

specifications.

TercelOilfietdProductsMiddleEast-JAFZRA08-FE05,P.O.Box17163,DubaiUAE Tel:+971 48832646/56

RUEtItrEN o ElE
 QMS-PL-002(9)
MAN UFACTU RER PRODUCT WARRANTY REVISION 6:AUGUST 2016

MPW- 09/ 7-0272-3

Serial No. Product Code Product Description

TABl 22S5822GO- ToTqAVANGER Reamer Body, 3-Point for 12-1/4" Family,

DEP-1 7-0803
864P63 Steel, Neck OD 8-1/4",|D 2-13/16, 6-5/8 Reg Pin x Box

N rv \
Middle East Date:23-09-2077.
J

P.O.Box: 17153, Jebel All

Dubal - U.A.E.

Tercel Oilfield Products Middle East - JAFZ RA08-F805 P.O. Box 17163, Dubai UAE Tel; +971 4 8832646,t56

A RUElICtfN
OtLFIEL9 INTEFNATIONAI
GlE
 Document No. QMS'ED-010(c)
0l
TERCEL
PRECIICAL INilAVAT'OIv
Revision No
lssue Date
Authorized by
19/02/14
Magdy Zaki

TERGEL TA
Oilfield Products Middle East Dimensional Data Sheef

ALWAYS USE CORRECT PROCEDURES AND PARTS LIST WHEN PREPARING TOOLS.
TOOL MUST HAVE PASSED RELEVANT INSPECTION PROCEDURE SUCCESSFULLY.
Size 12.25" TA

Serial Number: DEP-17-0803 Model TAB122SS822GO

Number:

Body passed MPI YES I--.] NO E

(not required if new)

Connections passed MPI

YES t] NO E
l
A (OD) 8.250
tt l.
B (tD)
2.813

0 a
c (oD) 10.750
(
fi 0 D (OD) Gauging OK
l) (i
(oD) 8.250
u E I
E
D
G
F (Length) 27.70
I E G (Length) 16.071
t
I
I
H (Length) 24.23
I
I (Length) 26.50

J (Length) 78.20

Fishing Neck Connection 6-5/8" REG

Bottom Neck Connection 6-5/8" REG

String Configuration M Near-Bit Configuration I
Tool Prepared as per Procedure and Correct Parts List YesM] ruof]
Tool serial number easily read Yes [ ruoE
Notes:
NEW
ri,\
Checks performed by (sign) FATSAL._ Date: 18-09-2017
_

Accepted by (sign) n\ Date: fr-Q't+

Document Number: ED-DD.OO2

Page I of I
PRIVATE & CONFIDENTIAL
@ 2O14 f ercrl Oilfi eld Products
Data Sheet Product Solution
TAEI 22SS822CO ToTqAVENGER'" Reamer Body Reaming and torque reduction

MAKING IT BETTER
The ToTqAVENCERTM Roller Reamer is a fully customizable
reaming and torque-reducing tool that improves borehole
shape, size and quality.

It provides stabilization by centralizing the BHA, minimizing

downhole vibrations, preventing the BHA from resting on the
low side of the deviated hole, and reducing BHA fatigue.

3-point Reamer Body, Steel, for Hole Sizes 11'3/4",12",121/8" and 121/4"

Dimensional Data Value Unit Value Unit

Tool Total Length (L) 82.000 inches 2,082.80 mm
Tool Body Diameter (B) 10.750 inches 273.05 mm
Tool Bore Diameter (minimum) (d) 2.813 inches 71.45 mm
Fishing Neck Diameter (D) 8.250 inches 209.55 mm
Fishing Neck Length (minimum) (FN) 27.000 inches 685.80 mm
Weight (approx) I ,1 38 lbs 5r6 kg
Number of Cutters 3

Total Flow Area Cartridge Value Unit Value Unit

Hole Size I l-3l4" TACI I 6 24.700 sq inches r 5,936 sq mm
Hole Size I 2" 20
TACI 20
28.I sq inches I 8,142 sq mm
Hole Size I 2-l /8" 21
TACI 29.830 sq inches I 9,245 sq mm
Hole Size l2-ll4" TACI22 31.550 sq inches 20,355 sq mm

ffi
L

custom sizes available upon request

Fishing neck length and overall length are approximate figures and may vary slightly
Dimensions are subject to change without prior notice
Tercel drilling tools are designed and manufactured in conformance with API SPECT-l and SPEC 7'2 Latest Editions

For more information

visit www.terceloilfield-com or contact your local sales office
Domestic and international patents and trademarks granted and/or applied for
wher€ applicable
TERCEL
PR ACT ICAL'NNOVAT'AN''

THIS DOCUMENT AND THE INFORMATION IN IT ARE PROVIDED IN STRICT CONFIDENCE FOR THE
SOLE PURPOSE OF PROVIDINC SPECIFICATIONs OF TERCEL'S PRODUCTS TO TERCEL'S CUSTOMERS AND o
MAY NOT BE DISCLOSED TO ANY THIRO PARTY OR USED FOR ANY OTHER PURPOSE WITHOUT THE =
tr
EXPRESS WRITTEN PERMISSION OF TERCEL OILFIELD PRODUCTS LIMITED. a
x
e
DOC.TAB122SS822GO.REV1
 FORM F10.1/11/o2
No, J415716-A-QC-8
twEos
P.O. Box 16975
JebelAli, Dubai
UnitedArab Emirates

QUALITY CONTROL INSPECTION CERTIFICATE

Customer: TERCEL OIL FIELD ( RUBTCON) Date : 13.09 2017

MEOS Job No: J415716-A Total Qty: 1 No.

P.O./WO/ Ref.No: P0-2017-01452 Drurg No:

CARRIED OUT FOLLOWTNG:-

SER No. DEP-17-0803. ITEM CODE: TAB122SS822G0-864p63

TorqAvenqer Reamer Bodv 3-potnt for 12-114" Familv.(Free Issued material) -etv-1 No,

MACHINED G5/8" REG PIN WITH SRG / 6.5/8" REG BOX WITH BORE BACK

/NSPECIED ABOVE ITEM AS PER APPLICABLE API 7.1 & DS.7 SPEC:
SPECIFICATTIOAIS/ND FOUND TO BE ACCEPTABLE

Above referenced ltems has been found to be satisfactory in accordance with applicable
Purchase Order terms & conditions and released for detivery,

lnspected for :-

1- Visual ACCEPTED 7. Thread Gauging ACCEPTED

2. Dimensional ---VdcEPTE>
8. Pressure Test N/A
3.LPI N/A 9. Func{ion Check N/A
4.MPI N/A 10. Dritt Check ACCEPTED
5 Radiography N/A 1 1. Protection ACCEPTED
6 Phospahttng ACCEPTED 1 1. Material test

A. RE\fIEWED BY
6
For and behalf of 2 3 SEP 2017
Meos Workshop Services
Assoclated Spec (if airy): """"""'
(it any)
Associated Concesslon

MEOS WORKSHOP SERVIGES

An ISO 9001, ISO 1400i, OHSAS ISOO{ Certified and Apl Llceos.d workshop
TEL: +9714-8E35262 FAX: +97{4€&tSSi9 Email: sales@meosu:ro.com
Afr{usatknhkLtmtConpry
 MILL TEST CERTIFICATE
TRANSCRIPT OF 3.1 CERTInCaTE acctrdingto EN 10204 Edition 2005
n
Stabilizer N\L-\+-053t-
thyssenkruPP }lateriats France
HeatN":15102001
:1 NS I Batch N': 17-30
Speclfication: API 7- I B
Order N': P0130814
State: and Bar N': 2
and vacuum
Nomi OD: 't 1 8.5" Wei
Additionnal Tcsts
Chcmlcal Anelysls Grain Slze ForglnS
PMI
Mlcrocteanllness (ASTf E45' JK scalc) ratlo
ci sit ,lnx x s9( Cta Nix Mo* Cu* Al* N" Ar9a Sdx H2 (ppol) (ASTM El12)
,rlax Max Max l,Lx c D Requlred > 6 Requlred 2 3
0.65 Max 0.80 Max 0.15 0.015 A B
0.43 0.15 0.025 2ppnt
Requlred '1.30 0.50 0.35 0.35 0.035 0,015 0.025
0.48 0..t0 1.20 0.025 0.025
Thin Thick Thin Thi<k Thln Thlck Thin Thick
0.5 0.0 1.5 1.0 7 5
7.0 1.5 2.0 1.0
1.16 0.015 0.002 t.16 0.0,1 0.3 0.0.t 1.0 0.5
Actu.l 0./t5 o.21 1.0 0.5 0.5 0 0 0

Heat Tr.atment
Mcchanical Properder: As per ASTM A 370. Longitudlnal at one lndl beto,'r the surface
AUST/QUENCHIN6 rcEruNG STRESS REIIEVIN6

Reductbn of KVJoulcs E50'C 607'c @7'C

Temp KV Joutes Actual Temp. ("C)
YtcldStrcnglh 0.2X Tcnillc Strcngth Elong.tbn Arca Rcquircd
Mpa % 70 Holding time 8h min 12h mln 12h mln
Required PSr l,tpa P5r Room 55 70 71
E27
-1-8777-
8314"-9314" r r0 000 758 140 000 965 13 45
- 20'c 42 Quenchlng l,ledia watcr atr atr

1 39780 961 I 56310 I 07E 17 49

Acturl
Hardnesc lnspcctlont: Brinell Hardness tests
Rourt mrchlnad Darts and 8ou(h machlnld plnt and End
Bar Number Requlred 1

SrEtcI ffihrnk'ltublnr t<50mm mchrnlc.ltublnr t>50mm

330 331
Solld
i5102@1-17-30 xu
tl2 --785--Yo min ----EndZ
l1 c2 D2 B] c3 D3 A4 84 c4 D4
ur A1 B1 c1 D1 A2 o7
325 315 312 314 317 296 300 JOr
c1
ia ll 33I 321 326 327 371 32? 323

Dcstructlvc
04M
\ 6
Non
Tttrlsontcf nspcaion 1 fi)* PASS -- API 7-1 & N51

63 o ilFlinspcaton iool6
IFIDiiEfanarel
#
oo
Ccrtlficatc
r@tt all tre
Scml 15102001-

Lorrcr Flshing Ncch 715.5mm

LH RH
Prct.<tor: Prcescd Stccl: tr Ovunll lcn6h: 2112mm uppcr Ftshlo3 Ncck: EOErm
Crown: 47!.5mm
BLdc Profllc: Lift TYPc: tr Crorrn OD: Fishing l{cck OD: llrtcmal Dl.rn tcr:
H..WdutyPl.stic: O 2E0.53/2E0.69mm 216.6/216.56mm 72.O5172,O7ttrtr
Herd Fad4 Typc:

Thrcad API Strcl: Farturc:

Thrced API
Taper Lead
Lead Outslde Dlameter lnslde Dlameter Bevel Dlarneter Strnd off Workhg Gage N
Taper (mm/m)
lnslde Dlarneter Bevet Dlarncter St nd off counter Bore Worklng Gage N' (mm) (nm) (nm)
Dlameter (mm/m) (mm/m)
(rrn) (mm)

Commcnts
(1) -
(2) - rnd wa
ben t6trd rnd wtth API 5ea that the frc from and
that desdb€d

t4
Page I sur 1