Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 62 views

    Roof DesignAnalysis Data Example

    Uploaded by

    DAVE
    This document summarizes the analysis of a supported cone roof tank according to API 650 standards. It includes details on the roof thickness, weight, design loads, number and details of rafter and girder rings, member sizes and stresses, weight summaries, and evaluations of uplift pressure and failure pressures according to appendix F. The roof passes all checks for member shear and bending capacity. The maximum design pressure is limited to 0.13950 psi due to uplift considerations.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Roof DesignAnalysis Data Example

    Uploaded by

    DAVE
    62 views4 pages
    This document summarizes the analysis of a supported cone roof tank according to API 650 standards. It includes details on the roof thickness, weight, design loads, number and details of rafter and girder rings, member sizes and stresses, weight summaries, and evaluations of uplift pressure and failure pressures according to appendix F. The roof passes all checks for member shear and bending capacity. The maximum design pressure is limited to 0.13950 psi due to uplift considerations.

    Original Description:

    Roof DesignAnalysis Data example

    Original Title

    Roof DesignAnalysis Data example

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the analysis of a supported cone roof tank according to API 650 standards. It includes details on the roof thickness, weight, design loads, number and details of rafter and girder rings, member sizes and stresses, weight summaries, and evaluations of uplift pressure and failure pressures according to appendix F. The roof passes all checks for member shear and bending capacity. The maximum design pressure is limited to 0.13950 psi due to uplift considerations.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    62 views4 pages

    Roof DesignAnalysis Data Example

    Uploaded by

    DAVE
    This document summarizes the analysis of a supported cone roof tank according to API 650 standards. It includes details on the roof thickness, weight, design loads, number and details of rafter and girder rings, member sizes and stresses, weight summaries, and evaluations of uplift pressure and failure pressures according to appendix F. The roof passes all checks for member shear and bending capacity. The maximum design pressure is limited to 0.13950 psi due to uplift considerations.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

    TANK, API-650/653 Analysis Intergraph CAS.

    @1994-2012 1
    Licensed To: TECHNOCAD ID: 27152
    Job: Ejercicio Clase G2 /16/13 Time: 18:19:19 Ver: 4.00

    TANK - Roof Design/Analysis Data

    API-650 11th Edition, Addendum 3, Aug. 2011

    SUPPORTED CONE ROOF Structural Library: AISC89.BIN

    Roof thickness per 5.10.2.2, Cone Roof (in. ): 0.18750

    Total weight of Roof Plates ...........(lb. ): 20368.

    (Based on user input thickness)

    User Specified Design Roof Load .......(lb./sq.in.): 0.19206

    (including user plate thickness)

    Computed Number of Girder Rings: 0

    Computed Number of Rafter Rings: 1

    Rafter Details from Tank Center

    RING Number Outer NUM/ Inner NUM/ Max

    Spacing GRDR Spacing GRDR Length (ft. )

    (in. ) (in. )

    1 27 81.179 ( 0) 0.000 ( 0) 26.121

    Rafter Size Details from Tank Center

    RING Rafter Load Selected --Section Modulus--

    (lb./in. ) Shape Required Actual

    (in. **3) (in. **3)

    1 8.635 W8X10 5.83 7.81

    Column Size Details (from center, Ring 0)

    RING Column Column Allow Comp Required Radius


    TANK, API-650/653 Analysis Intergraph CAS. @1994-2012 2
    Licensed To: TECHNOCAD ID: 27152
    Job: Ejercicio Clase G2 /16/13 Time: 18:19:19 Ver: 4.00

    Load Height Stress of Gyration

    (lb. ) (ft. ) (lb./sq.in.) (in. )

    0 41573.6 31.74 6855.6 2.116

    RING Num Selected Actual Comp Actual Radii

    Shape Stress of Gyration

    (lb./sq.in.) (in.) (in.)

    0 1 P6_XS 4949.2 2.195 2.195

    SECTION 5.10.3 CHECKS FOR ROOF MEMBERS

    Rafter Actual Allowable Status Actual Allowable Status

    Ring Shear Shear Bending Bending

    (lb./sq.in.) (lb./sq.in.) (lb./sq.in.) (lb./sq.in.)

    1 457.2 13000.0 PASS 13578.9 20000.0 PASS

    Girder Actual Allowable Status Actual Allowable Status

    Ring Shear Shear Bending Bending

    (lb./sq.in.) (lb./sq.in.) (lb./sq.in.) (lb./sq.in.)

    Column Actual Allowable Status

    Ring Compression Compression

    (lb./sq.in.) (lb./sq.in.)

    0 4949.2 6756.1 PASS

    ROOF WEIGHT SUMMARY

    Weight of Roof Plates ...............(lb. ): 20368.

    Weight of Roof Rafters ..............(lb. ): 7104.4

    Weight of Roof Girders ..............(lb. ): 0.00000


    TANK, API-650/653 Analysis Intergraph CAS. @1994-2012 3
    Licensed To: TECHNOCAD ID: 27152
    Job: Ejercicio Clase G2 /16/13 Time: 18:19:19 Ver: 4.00

    Weight of Roof Columns ..............(lb. ): 907.45

    TOTAL Roof Weight ...................(lb. ): 28380.

    ROOF EVALUATIONS - Appendix F

    Uplift force due to internal pressure..(lb. ): 0.00000

    Total weight resisting uplift .........(lb. ): 83286.

    Max Design Pressure, limited by uplift.(in of H2O ): 3.8632

    Max Design Pressure, limited by uplift.(lb./sq.in.): 0.13950

    (According to F.4.2)

    Max Design Pressure, roof/shell joint.(in of H2O ): 4.1503

    Max Design Pressure, roof/shell joint.(lb./sq.in.): 0.14987

    (According to F.4.1)

    (Note, this value is limited by F.4.2 for further usage.)

    Compression Ring Failure Pressure .....(in of H2O ): 4.9864

    Compression Ring Failure Pressure .....(lb./sq.in.): 0.18006

    (According to F.6)

    Required Compression Areas, Roof/Shell Junction

    Area as per Section F.5 ..............(in. **2 ): 0.00000

    FRANGIBLE ROOF-TO-SHELL JUNCTION AREA LIMIT

    Area as per Section 5.10.2.6 ..........(in. **2 ): 3.9853


    TANK, API-650/653 Analysis Intergraph CAS. @1994-2012 4
    Licensed To: TECHNOCAD ID: 27152
    Job: Ejercicio Clase G2 /16/13 Time: 18:19:19 Ver: 4.00

    TANK(c) Intergraph CADWorx & Analysis Solutions, Inc. 2012

    You might also like