Air Motor Catalogue 2017
Air Motor Catalogue 2017
Air Motor Catalogue 2017
Air motors
AT L A S C O P C O A I R M OTO R S 3
ADDITIONAL INFORMATION
ABOUT OUR AIR MOTORS
Selecting the right motor has never been easier! Want to know more about air motors?
Just enter the required working point for the application and In this pocket guide you will find information about function,
the most suitable motor will automatically be selected. For design, motor selection and installation.
the selection use the Atlas Copco selection tool. Use the Ordering No. 9833 9067 01.
www.atlascopco.com/airmotors
Visit our website and browse through our on-line catalogue.
You’ll find comprehensive technical information as well as
details of accessories, spare parts and dimensional drawings.
You can also subscribe to our news.
4 AT L A S C O P C O A I R M OTO R S
CONTENTS
6–7
Introducing the air motor
• Methods of modifying motor output
• Using the catalogue
8–9
Choosing your motor
• The working point
• Atlas Copco air motor selection guide
• Starting torque and stall torque
• Accelerating a load to speed
• Shaft loading
• Silencing
• Temperature
• Hostile environments
• Atlas Copco air motor selection program
10 – 13
Installing your air motor
• Air lines
• Recommended hose connectors
• Air preparation
• Lubrication
• Control valves for air motors
• Installation examples
• Introduction to Atlas Copco air motors and gear units
14 – 69
LZB vane motors introduction
• Shaft loading
• Mounting
• Connection
• Hose dimensions
• LZB vane motors: data, specification and performance curves
• Accessories for air motors
70 – 88
LZL vane motors introduction
• Shaft loading
• Mounting
• Connection
• Hose dimensions
• LZL vane motors: data, specification and performance curves
• LZL vane motor/gear unit combinations
• LZL air motors: with helical gear units data, specification and performance curves
• Accessories for LZL motors
89 – 90
ATEX
• Explosion prevention guidelines
• ATEX code definition
AT L A S C O P C O A I R M OTO R S 5
INTRODUCING THE AIR
MOTOR
The air motor is one of the toughest and most versatile power units available to today´s design engi-
neer. It is easy to control over a wide speed range, and it produces maximum torque where it is often
most needed – at start up.
The performance of an air motor is dependent on the inlet The performance curves for an ungoverned air motor opera-
pressure. At a constant inlet pressure, ungoverned air motors ting at a constant air pressure are illustrated in Figure 3.
exhibit the characteristic linear output torque/speed relations-
hip. Figure 1.
Torque
[Nm]
Torque
Nm
Torque
Stall
torque Power
Min
starting
torque
Figure 1
Speed [r/min]
Figure 3
Speed r/min
However, by simply regulating the air supply, using the
techniques of throttling or pressure regulation, the output of
an air motor can easily be modified. The use of gear units
The free speed and torque can be regulated down to 50% Air motors operate at high speed and, although they can be
for an LZB air motor. The free speed for an LZL can be regu- controlled over a wide speed range, the output characteris-
lated down to 10% and the torque can be regulated down to tics are not always suitable for the application. To achieve the
20%. The shaded areas in Figure 2 illustrate this. required output an appropriate gear unit can be selected. The
ability to change the output by use of a gear unit is illustrated
Torque Torque in Figure 4.
100% 100%
100 100
Torque
Nm
Torque
Power
50 50
20
2:1
50 100 10 50 100
Speed 100% Speed 100% 1:1
LZB LZL
Figure 2 4:1
6 AT L A S C O P C O A I R M OTO R S
METHODS OF MODIFYING
MOTOR OUTPUT
Par
[Nm]
Torque Torque
Nm %
100
Operating pressure
Velocidad [r/min]
7 bar
6 bar
5 bar
4 bar
3 bar
Speed r/min
Figure 8
AT L A S C O P C O A I R M OTO R S 7
CHOOSING
YOUR MOTOR
step is to establish what is called the “working point”. This is 0.4 0.4
Speed
The power required at the working point is calculated by: 200 400 600 800 r/min 200
LZB33-L-A007-11 Figure 6
Power = π
xMxn [W]
30
Where, M = Torque at working point (in Nm)
n = Speed at working point (in r/min) If necessary, one of the flow control methods can be used
to modify the output of a motor to meet the working point
exactly (Figure 7).
Example:
A Non-reversible motor is required to run at 300 r/min and p roduce a
torque of 10 Nm. Selection of correct motor size is as follows: Torque
Nm
Power required (W) = 3.14 x 10 x 300/30 = 314 Desired working point
From Table 5 the correct size of Non-reversible Torque with standard
motor for this application is the LZB 33. motor at 6.3 bar (91 psi)
Torque with throttled
motor
Torque with pressure
Once the motor size has been identified, simply look at the regulator
performance curves for each motor variant and select the one
with max. output nearest to the working point. For the above
example this would be the LZB33-L-A007-11.
Speed r/min
Figure 7
8 AT L A S C O P C O A I R M OTO R S
Pressure regulation Other applications require a certain stall torque. A motor’s
stall torque can be calculated by looking up the ”torque at
Sometimes the motor operates at other supply pressures maximum output“ and multiplying this value by two. Where
than 6.3 bar. In these cases the performance of a motor it is desirable to control the stall torque, the technique of
must be re-calculated to ensure the working point can be pressure regulation should be used.
achieved.
To calculate performance at supply pressures other than
Accelerating a load to speed
6.3 bar, multiply the data at 6.3 bar by the correction factors
shown in t able below. Certain applications require the acceleration of a load up to
a given speed. In these cases, the choice of motor involves
complex calculations. It is therefore recommended that you
Correction factors seek guidance from your nearest Atlas Copco representative
Air pressure before proceeding.
Air
bar psi Output Speed Torque consumption
Shaft loading
7 101 1.13 1.01 1.09 1.11
6 87 0.94 0.99 0.95 0.96 Always ensure shaft loadings are within the stated allowable
5 73 0.71 0.93 0.79 0.77 limits.
4 58 0.51 0.85 0.63 0.61
3 44 0.33 0.73 0.48 0.44
Silencing
It is also easy to calculate the inlet pressure required to
achieve a desired working point. The noise generated by an air motor is mainly caused by
the exhaust air of the motor. The noise level increases with
speed and is greatest at the free speed.
All Atlas Copco motors are supplied with a threaded
exhaust port which, to reduce noise levels, can accept a
Example: screw in silencer. However, an exhaust hose can also be fit-
An LZB22-L-A036-11 is required to run at 1155 r/min and produce 1.2
ted, and when used with a silencer, it can reduce noise levels
Nm; calculate the required inlet pressure to achieve this.
For this motor at maximum output the torque is 1.5 Nm and the speed even further. The effects of employing the various silencing
is 1650 r/min. techniques are indicated in tables in chapter Accessories.
M1 = desired torque
n1 = desired speed Temperature
M2 = torque at maximum output
n2 = speed at maximum output Atlas Copco air motors can operate reliably in ambient tem-
peratures that range from –20°C (–4°F) to +60°C (+140°F).
Calculate the ratios M1 /M2 and n1 /n2
Therefore M1 / M2 = 0.8 and n1 /n2 = 0.7
However, below ambient temperatures of +5°C (+41°F)
the compressed air may need to be dried to avoid freezing
Apply these values to the diagram in Figure 8 and read off the pressure at problems.
the intersection point. Please note it is often possible to operate these motors at
The required inlet pressure is 4.2 bar (61 psi) much h igher temperatures but this should not be attempted wit-
hout first checking with your local Atlas Copco representative.
Hostile environments
M1
M2
Atlas Copco air motors are found in use in many hostile envi-
2.2
ronments, often with little or no modification. These environ-
2.0
1.8
ments are typified as being:
1.6
bar
1.4 Acidic – Explosive – Radioactive – High temperature –
7 psi
1.2
6 101
Moist – Dusty – Intense electric fields – Underwater – High
1.0
5 87 humidity.
0.8
4 73
0.6
0.4 3 58 It is also possible to power an air motor with many types of
0.2
44
n1 compressed gas, for example nitrogen or natural gas.
n2
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Speed
Figure 8 However, to ensure safe and reliable service, we recom-
r/min mend you always consult your local Atlas Copco representa-
tive before using an air motor in a hostile environment.
Starting torque and stall torque Atlas Copco Air motor Selection Program
Many applications demand that a motor produces a mini- The Atlas Copco Air Motor Selection Program makes it very
mum torque at start-up. In these a minimum starting torque, easy for you to select the right motor. The Windows-based
for a given motor, can be looked up in the tabular data. If it program stores data on all Atlas Copco air motors. Simply
is necessary to modify the motor’s output, but also maintain specify the required torque and speed of the motor and the
a high starting torque, the technique of throttling the air flow program will select the most suitable motor for your applica-
should be utilized. tion. Available at www.atlascopco.com/airmotors
AT L A S C O P C O A I R M OTO R S 9
INSTALLING YOUR
AIR MOTOR
Air lines Lubrication
The recommended dimensions of air lines are given in the Lubricated vane motors
introductory section to each motor type. Note that exhaust To achieve optimum service life and performance the lubri-
hose is larger than inlet hose. cated vane motors should be used. They should be supplied
The recommendations are valid for hose lengths of up to with 50 mm3 of oil for each cubic meter (1000 liters) of con-
3 meters. For distances between 3 and 15 meters select a sumed air (one oil drop ≈ 15 mm3).
hose diameter one size up, and for distances between 15 Insufficient lubrication will result in accelerated vane wear
and 50 meters select a hose diameter two sizes up. and performance reduction.
It is important to note that the output of the motor will be
reduced if these guidelines are not followed. The following example shows how to calculate the lubrication
required for a motor running at a known working point.
Recommended hose connectors
Because of the compact dimensions of Atlas Copco vane
motors, special hose connectors are available with small key Example:
width – facilitating easy installation.
A Non-reversible LZB 42 motor running at maximum output consumes
The hose connectors can be ordered through your local 13 liters/sec of air.
Atlas Copco representative. In one minute it consumes 780 liters of air, therefore the lubrication
required is:
Air preparation 780 x 50 = 39 mm3/min
1000
For optimum performance and maximum machine life we
If an oil-fog lubricator is to be used it should be set to deliver 3 drops
recommend the use of compressed air with a maximum
of oil a minute (1 drop = 15 mm3).
dew point of +10°C. We also recommend the installation of
an Atlas Copco refrigeration-type air dryer.
To ensure reliable service an air filter and lubricator should
The selected lubrication oil, should have a viscosity between
be fitted into the inlet air line – within 3 meters from the
32-46 mm2/s at the motor’s working temperature.
motor.
In applications where there is a risk of insufficient or
It is recommended that a pressure regulator is also incor-
unreliable air lubrication, we recommend using a lubrication
porated into the air preparation package. This has the fun-
free vane motor.
ction of maintaining the desired working pressure, and can
be used to modify the motor’s output to meet the needs of
The table below shows how reduced lubrication can affect
the application.
service life and power for a lubricated vane motor.
When selecting an air preparation package, ensure all com- Lubricant Service Output
ponents have sufficient flow capacity to meet the require- quantity life power
ments of the motor. The filter shall remove solid particles mm3 oil m3 Hours %
larger than 15 microns and also remove more than 90 % of 50 1000–3000 100
10 500–1000 100
liquid water. A typical arrangement of an air preparation
1 200–500 90
installation is shown below, Figure 9. 0.1 100–300 80
0 10–30 30
1 drop of oil is approx. 15 mm3
10 AT L A S C O P C O A I R M OTO R S
Directional control valves
These valves are used to start or stop a motor, or to change 3/2 valve
its direction of rotation. It is most usual to use what is
termed a 5/3 valve to control a reversible motor, and a 3/2
valve to control a Non-reversible motor.
Installation examples
NOTE: For LZL air motors it is important that an inlet res-
Typical installation diagrams for type LZB and LZL air motors, trictor is p
laced upstream from the inlet. It must be placed
together with their associated control valves, filters, regula- so it does not affect the exhaust at reversible running. This
tors lubricators and silencers. means that it has to be placed before the control valve.
Non-reversible
Reversible duty
with 5/3 valve and
Reversible closed mid position
Figure 12
A = Filter
B = Pressure regulator
C = Oil fog lubricator
D = Silencer
E = 5/3 valve
F = Air motor
Figure 13
AT L A S C O P C O A I R M OTO R S 11
INTRODUCTION TO
AIR MOTORS AND GEAR UNITS
Explosion proof
All our air motors are explosion proof certified for fixtured
applications, in compliance with the European Union´s ATEX
directive 2014/34/EU. For equipment used in potentially
explosive environments. The LZL motors with Helical gears
are not ATEX certified.
EX-Certified air motors are ideal in hazardous environments
where sparks or high outer temperatures might otherwise
ignite explosive gases, vapour or dust.
12 AT L A S C O P C O A I R M OTO R S
Lubrication free air motors LZL vane motors – 1.05 kW to 6.5 kW
Atlas Copco’s lubrication free air motors are equipped with Type LZL Atlas Copco vane motors have been designed to
low-friction vanes, sealed bearings and vented cylinder p lates. offer outstanding starting and low speed performance. These
Since they release no lubricants into the air, they offer a via- general purpose motors are powerful, rugged and hard wear
ble drive solution for sensitive processes and hygienic envi- ing, Figure 10.
ronments where oil contamination would be at best a pro-
blem and, at worst, a catastrophe. Both lubrication free vanes
and lubricated vanes are available as kits for replacement or
conversion.
Silicon free
All the air motors are 100% silicon free. For app-
lications handling paint, this is an absolute must
as the presence of silicone can cause
big problems.
500 r/min
L: Lubrication free
LB: Lubrication free, Brake module
Motors with brake RL: Lubrication free, Stainless steel
RLB: Lubrication free, Stainless steel, Brake module
The most popular vane motors, LZB33, 34, 54,
RML: Lubrication free, Stainless steel, Stainless steel motor cell
are available with parking brake. This brake
is located between the motor A: Clockwise rotation
and the gear. It is a disc brake AV: Anti-clockwise rotation
AR: Reversible
that is spring activated when LR: Reversible, Low speed with low torque
the motor is
not running. When the motor is 11: Output shaft with Key
12: Output shaft with Thread
started the brake is released by a built-in pneumatic piston. 15: Output shaft with Key, Slimmed interface
The brake is used when it is important that the output shaft 16: Angle head with square
must not turn when the motor isn’t running and a torque is 20: Output shaft with Key, with flange, IEC flange available
applied on the shaft. Table 1 explains what features the letters in the motor
designation stand for. Table 1
AT L A S C O P C O A I R M OTO R S 13
LZB
VANE MOTORS
14 AT L A S C O P C O A I R M OTO R S
AT L A S C O P C O A I R M OTO R S 15
LZB VANE MOTORS
Introduction
Fr
LZB vane motors are designed to provide high performance N
high power output and small physical size, Figure 12. 3000
2500
2000
1500
1000
500
Fa
N
500 1000 1500 2000 2500 3000 3500 4000 4500 5000
Figure 12 Curve e
Curve g
The design of the motor is long and slim. This gives a num- A
ber of advantages, such as high power-to-volume ratio, low Fr
air consumption and long vane life. All motors utilize five Cylindric Thre
vanes, which are supplied with vane air, to ensure excellent Fa
starting and low speed performance. Multi-step planetary
gears are used to meet the torque and speed requirements shaft shaf
of the application, offering high efficiency with compact Figure 14
dimensions.
Fr
Shaft loading N
shaft are illustrated in Figures 13, 14. The relevant load curve
code for a motor is stated in the data tables for each speci- 1500
A Fr Fa
500 1000 1500 2000 N
Threaded Curve d
Curve c
A = 20 mm
A = 15 mm
Fa Fa Curve b
Curve a
A = 9 mm
A = 8 mm
Figure 13 Fr
N
4000
Fr
N
450 3000
400
350
2000
300
250
200 1000
150
100 Fa
N
50 1000 2000 3000 4000 5000 6000 7000
0 Fa Curve h A = 20 mm
500 1000 1500 2000 2500 N Curve g A = 15 mm
Curve a Curve f A = 20 mm
Curve e A = 15 mm
Curve b
Curve c
16 AT L A S C O P C O A I R M OTO R S
Mounting Connection
Clockwise Figure 16
rotation
Foot
Anti-clockwise
rotation
Flange
Figure 15
Figure 17
Anti-clockwise
rotation
Clockwise
rotation
Hose dimensions
Information on hose dimensions recommended for use with type LZB air motors is detailed in table below. These dimensions
are valid for hose lengths up to 3 m. If lengths above that are used, choose a one size larger hose.
Hose size up to 3 m length
Inlet Inlet
connec- Inlet recomended Inlet Outlet Outlet Outlet Outlet
tion connection Inlet nipple nipple* connection hose* recomended nipple*
thread thread hose* connection diameter thread nipple connection diameter
Motor size Rotation BSP NPTF mm Ordering No. mm BSP mm Ordering No. mm
LZB14 A, AV, AR 1/8 - 8 9000 0240 00 5.0 1/8 8 9000 0240 00 5.0
LZB22 A, AV 1/8 - 8 9000 0240 00 5.0 1/4 10 9000 0247 00 8.0
LZB22 AR, LR 1/8 - 8 9000 0240 00 5.0 1/8 8 9000 0240 00 5.0
LZB33, LZB34 A, AV, AR, LR 1/4 - 10 9000 0247 00 8.0 1/4 10 9000 0247 00 8.0
LZB42 A, AR 1/4 - 10 9000 0247 00 8.0 1/2 16 9000 0244 00 13.4
LZB46 A, AV, AR 1/4 - 10 9000 0247 00 8.0 1/2 16 9000 0244 00 13.4
LZB54 A, AV, AR 3/8 - 13 9000 0248 00 9.3 1/2 16 9000 0244 00 13.4
LZB66 A, AR 3/8 - 13 9000 0248 00 9.3 3/4 20 9000 0245 00 17
LZB77 A, AR - 1/2"-14 16 9000 0244 01 13.4 - - - -
LZB77 A, AR 1/2** - 16 9000 0244 00 13.4 - - - -
* Recommended minimum inner diameter (for reversible motors, the same size should be used on both in-/outlet)
** Alternative connection thread BSP 1/2" delivered with the product
AT L A S C O P C O A I R M OTO R S 17
VANE MOTORS LZB14-L
Lubrication free
0.11 – 0.16 kW
0.15 – 0.21 hp
EX certification valid for fixture mounted use only with a
maximum surrounding temperature of +40°C (104°F).
For optional vanes and accessories see chapter Accessories.
17 111*
123*
12 Ø27
9.5
7.9
111*
2
BSP 1/8”
5/16” -24 UNF
A/F 23
Reversible 6.8
6.8
3.95
6.8
*) +9.8 mm for LZB14
Ø6 h7
AV012, AV007
2 h7
BSP 1/8”
A/F 25
Optional mountings
52
2
3.5
R1
30
ø30h7
80
29.5
30
M5 21 5 ø5.5
60
28.2 15.5
Foot Flange
Ordering No. 4430 0189 80 Ordering No. 4430 0165 85
18 AT L A S C O P C O A I R M OTO R S
VANE MOTORS LZB14-RL
17.1 114.2*
12 Ø27
7.9
2
BSP 1/8”
A/F 23
Reversible
6.8
6.8
3.95
6.8
*) +9.8 mm for LZB14-RL
A012, A007, AR008, AR005
Ø6 h7
7.9
2 h7
BSP 1/8”
A/F 25 Optional mountings
52
2
3.5
R1
30
ø30h7
72
29.5
30
M5 21.8 5 ø5.5
60
28.2 15.5
Foot Flange
Ordering No. 4430 0923 80 Ordering No. 4430 0922 80
AT L A S C O P C O A I R M OTO R S 19
LZB14-L, LZB14-RL: Performance curves at air pressure 6.3 bar (91 psi)
Non-reversible (A and AV)
200 400 600 800 1000 1200 r/min 100 200 300 400 500 600 700 r/min
kW Nm LZB14-L-AR140 l/s kW Nm LZB14-L-AR034
Reversible (AR) l/s kW Nm LZB14-L-AR020 l/s
0.12 0.12 0.12 2.4
0.08 Nm
0.4 4 0.08 Nm
kW 1.2 LZB14-L-AR034 4 0.08 Nm
1.6 4
kW LZB14-L-AR140 l/s l/s kW LZB14-L-AR020 l/s
0.12
0.06 0.3 3 0.12
0.06 0.9 3 0.12
0.06 2.4
1.2 3
0.10
0.04 0.2 5
2 0.10
0.04 1.5
0.6 5
2 0.10
0.04 2.0
0.8 5
2
0.08
0.02 0.4
0.1 4 0.08
0.02 1.2
0.3 4
1 0.08
0.02 1.6
0.4 4
1
1
0.06 0.3 3 0.06 0.9 3 0.06 1.2 3
4000 8000 12000 r/min 500 1000 15002000250030003500 r/min 400 800 1200 1600 2000 2400 r/min
0.04 0.2 2 0.04 0.6 2 0.04 0.8 2
0.02
kW Nm 0.1 LZB14-L-AR008 1l/s 0.02
kW 0.3
Nm LZB14-L-AR005 1l/s 0.02 0.4 1
0.12 6 0.12 9.0
4000 8000 12000 r/min 500 1000 15002000250030003500 r/min 400 800 1200 1600 2000 2400 r/min
0.10 5 5 0.10 7.5 5
0.08 Nm
kW 4 LZB14-L-AR008 4 0.08 Nm
kW 6.0 LZB14-L-AR005 4
l/s l/s
0.12
0.06 6
3 3 0.12
0.06 9.0
4.5 3
0.10
0.04 5
2 5
2 0.10
0.04 7.5
3.0 5
2
0.08
0.02 4
1 4
1 0.08
0.02 6.0
1.5 4
1
0.06 3 3 0.06 4.5 3
200 400 600 800 1000 r/min 100 200 300 400 500 r/min
0.04 2 2 0.04 3.0 2
0.02 1 1 0.02 1.5 1
200 400 600 800 1000 r/min 100 200 300 400 500 r/min
Torque
Nm
Power Conversion factors
kW Air cons.
Power l/s 1 kW = 1.34 hp
Max
output 1 Nm = 0.74 Ibf - ft
Air. cons. 1 l/s = 2.1 cfm
1 hp = 0.75 kW
Torque
at max
Torque
1 Ibf-ft = 1.36 Nm
output
1 cfm = 0.47 l/s
Speed r/min
20 AT L A S C O P C O A I R M OTO R S
VANE MOTORS LZB22-L
AT L A S C O P C O A I R M OTO R S 21
Dimensions (mm) Conversion factor 1 mm = 0.04 inch
Clockwise
9.5
BSP 1/8”
A/F 31
6
7.5
23.5 110.9*
Anti-clockwise 16 Ø36
BSP 1/8”
3
M4
A/F 33
11.4
Ø12
7.7
BSP 1/4”
THREAD DEPTH 12 mm 3 h7
A/F 31
Reversible
Ø10 h6
*) +31 mm for
11.2
9.5
LZB22- L- A011 LZB22-L- AV011 LZB22- L- AR006
9.5 LZB22- L- A008 LZB22-L- AV008 LZB22- L- AR005
LZB22-L- A005 LZB22-L- AV005 LZB22- L- AR003
A/F 31
6
127*
3/8” -24 UNF
16 111*
BSP 1/8”
11
Ø18
Optional mountings 26
2
60
8
R1
30
Ø30h7
80
30
32
10
M5 15 5 Ø5.5
50 37.2 18
Foot Flange
Ordering No. 4430 0160 80 Ordering No.
4110 0984 85 with holes
4110 0984 80 without holes
22 AT L A S C O P C O A I R M OTO R S
VANE MOTORS LZB22-RL
3 18
6
3 h7
Ø12
7.5
11.2
Ø36
5 BSP 1/4”
Ø10 h6
THREAD DEPTH 8 mm
Reversible 9.5 *) +31.2 mm for
9.5 LZB22-RL- A011 LZB22-RL- AR006
LZB22-RL- A008 LZB22-RL- AR005
LZB22-RL- A005 LZB22-RL- AR003
A/F 31
26.5
6
Optional mounting
8
2
60
BSP 1/8”
8
R1
30
Ø30 h7
72
30
32
10
M5 15 5 Ø5.5
50 37.2 18
Foot Flange
Ordering No. 4430 0862 80 Ordering No. 4430 0861 80
AT L A S C O P C O A I R M OTO R S 23
LZB22-L, LZB22-RL: Performance curves at air pressure 6.3 bar (91 psi)
Non-reversible (A and AV)
0.10 3.0 400 800 1200 1600 2000 24003.0r/min 0.10 4 200 400 600 800 1000 12003.0r/min 0.10 6 200 400 600 800 10003.0r/min
kW Nm LZB22-L-A005 l/s
0.05 1.5 1.5 0.05 2 1.5 0.05 3 1.5
0.30 30
LZB22-L,
0.05 5
LZB22-RL: Performance
1.5
curves at air pressure 6.3 bar (91 psi)
kW Nm 100 200 300
LZB22-L-AR126 400 500
l/sr/min kW Nm LZB22-L-AR028 l/s kW Nm LZB22-L-AR021 l/s
0.18 0.45 0.18 Reversible (AR) 0.18 2.7
0.16 0.40 0.16 0.16 2.4
0.14 0.35 0.14 2.1 0.14 2.1
kW Nm LZB22-L-AR126 kW Nm LZB22-L-AR028 6l/s kW Nm LZB22-L-AR021
0.12 0.30 6l/s 0.12 1.8 0.12 1.8 6l/s
0.18 0.25
0.45 0.18
0.10 1.5 5 0.18
0.10 2.7
1.5 5
0.10 5
0.16 0.40 0.16
0.08 1.2 4 0.16
0.08 2.4 4
0.08 0.20 4 1.2
0.14 0.15
0.35 0.14
0.06 2.1
0.9 3 0.14
0.06 2.1 3
0.06 3 0.9
0.12 0.10
0.04 0.30 26
0.12
0.04 1.8
0.6 26 0.12
0.04 1.8
0.6 26
0.10 1.5 15
0.10 0.05
0.02 0.25 15 0.02 0.3 0.10
0.02 1.5
0.3 15
0.08 0.20 4 0.08 1.2 4 0.08 1.2 4
0.06 0.15 4000 8000 12000 r/min
3 0.06 0.9 500 1000 1500 2000 2500 3000 35003r/min 0.06 0.9 400 800 1200 1600 2000 2400 3r/min
0.04 0.10
kW Nm LZB22-L-AR013 2
l/s 0.04
kW 0.6
Nm LZB22-L-AR006 2
l/s 0.04
kW 0.6
Nm LZB22-L-AR005 2
l/s
0.02 0.05
0.18 4.5 1 0.02
0.18 0.39 1 0.02
0.18 0.3 1
0.16 4.0 4000 8000 12000 r/min 0.16 8 500 1000 1500 2000 2500 3000 3500 r/min 0.16 12.0
400 800 1200 1600 2000 2400 r/min
0.14 3.5 0.14 7 0.14 10.5
kW Nm LZB22-L-AR013 6l/s kW Nm LZB22-L-AR006 kW Nm LZB22-L-AR005 6l/s
0.12 3.0 0.12 6 6l/s 0.12 9.0
0.18 2.5
0.10 4.5 5 0.18
0.10 59 5 0.18 7.5
0.10 5
0.16 2.0
4.0 0.16 0.16 12.0
0.08 4 0.08 48 4 0.08 6.0 4
0.14 1.5
3.5 0.14 0.14 10.5
0.06 3 0.06 37 3 0.06 4.5 3
0.12 1.0
0.04 3.0 26 0.12
0.04 26 26
0.12 3.0
0.04 9.0 26
0.10 0.5
0.02 2.5 15 0.10
0.02 15 15
0.10 7.5
0.02 1.5 15
0.08 2.0 4 0.08 4 4 0.08 6.0 4
0.06 1.5 200 400 600 800 1000 1200 14003r/min 0.06 3 100 200 300 400 500 600 7003r/min 0.06 4.5 100 200 300 400 500 600 3r/min
0.04 1.0 2 0.04 2 2 0.04 3.0 2
kW Nm LZB22-L-AR003 l/s
0.02 0.5 1 0.02 1 1 0.02 1.5 1
0.18
0.16 200 400 600 800 1000 1200 1400 r/min 100 200 300 400 500 600 700 r/min 100 200 300 400 500 600 r/min
0.14 21
kW Nm
0.12 LZB22-L-AR003 6l/s Torque
18 Nm
0.18 15
0.10 5 Power Conversion factors
kW Air cons.
0.16 12
0.08 4 Power l/s 1 kW = 1.34 hp
Max
0.14 21
0.06 9 3
output 1 Nm = 0.74 Ibf - ft
0.12 18
0.04 6 26 Air. cons. 1 l/s = 2.1 cfm
0.10
0.02 15
3 15
0.08 12 4 1 hp = 0.75 kW
0.06 9 50 100 150 200 250 300 350 3r/min Torque
at max
Torque
1 Ibf-ft = 1.36 Nm
output
0.04 6 2 1 cfm = 0.47 l/s
0.02 3 1
24 AT L A S C O P C O A I R M OTO R S
VANE MOTORS LZB22-L-LR
0.16 45
50
0.14 40
0.015
35
40 0.12
30
0.10
30 25 0.010
0.08
20
20 0.06 Limit
Limit 15
0.04 0.005
10
10
0.02 5
0 0 0 0
0 20 40 60 80 100 120 140 r/min 5.6 5.7 r/min
AT L A S C O P C O A I R M OTO R S 25
Dimensions LZB22-L-LR (mm) Conversion factor 1 mm = 0.04 inch
Reversible 198.5*
198.5*
9.5 23.5 172.9*
9.5 23.5 172.9*
9.5 16
9.5 16 Ø36
3 Ø36
3 3 h7
M4
3 h7
M4
Ø10 h6
A/F 31
A/F 33
11.2
6
Ø12
Ø10 h6
A/F 31
A/F 33
11.2
6
Ø12
8
8
Optional mountings 26
26 2
2
60
60
8
R1
30
8
R1
30
Ø30h7
80
Ø30h7
80
30
32
30
32
10
10
M5 15 5 Ø5.5
M5 50 15 37.2 5 Ø5.5
50 18
37.2
18
Foot Flange
Ordering No. 4430 0160 80 Ordering No. 4110 0984 85 with holes
4110 0984 80 without holes
Reversible
202.1*
202.1*
9.5 24.5 177.5*
9.5 24.5 177.5*
9.5 18
9.5 18 Ø36
3 Ø36
3 3 h7
3 h7
M4
M4
Ø10 h6
A/F 31
A/F 33
11.2
6
Ø12
Ø10 h6
A/F 31
A/F 33
11.2
86
Ø12
8
8
R1
30
8
R1
30
Ø30 h7
Ø30 h7
72
72
30
32
30
32
10
10
M5 15 5 Ø5.5
M5 15 5 Ø5.5
50 37.2 18
50 37.2 18
Foot Flange
Ordering No. 4430 0862 80 Ordering No. 4430 0861 80
26 AT L A S C O P C O A I R M OTO R S
VANE MOTORS LZB33-L
LZB33-L, for mounting with IEC flange (flange has to be ordered separetly)
Data at air pressure 6.3 bar (91 psi)
Speed Torque Min Air
Max at max at max starting Stall Free consump- Shaft
output output output torque torque speed tion at max Weight lo-
Model output ading
Lubrication free kW hp r/min Nm lb-ft Nm lb-ft Nm lb-ft r/min l/s cfm kg lb code ATEX code Ordering No.
Clockwise rotation (Keyed shaft)
LZB33-L-A013-20 0.38 0.51 580 6.4 4.7 12 8.9 12.8 9.4 1180 8.1 17.2 1.02 2.25 d Ex II 2GD c T6 IIC T85°C 8411 0352 75
LZB33-L-A007-20 0.38 0.51 320 11.5 8.5 21 15.5 23 17 650 8.1 17.2 1.02 2.25 d Ex II 2GD c T6 IIC T85°C 8411 0352 83
LZB33-L-A005-20 0.38 0.51 260 14.2 10.5 26 19.2 28 21 520 8.1 17.2 1.02 2.25 d Ex II 2GD c T6 IIC T85°C 8411 0352 91
LZB33-L-A0030-11 0.37 0.5 160 22.3 16.4 40 30 45 33 340 8.1 17.2 1.5 3.31 d Ex II 2GD c T6 IIC T85°C 8411 0306 72
Anti-Clockwise rotation (Keyed shaft)
LZB33-L-AV0030-11 0.37 0.5 160 22 16.2 38 28 44 32 340 9.5 20.2 1.5 3.31 d Ex II 2GD c T6 IIC T85°C 8411 0345 59
Reversible (Keyed shaft)
LZB33-L-AR0026-11 0.24 0.32 120 19 14 20 14.8 38 28 230 7.9 16.8 1.5 3.31 d Ex II 2GD c T6 IIC T85°C 8411 0308 70
* Not including the weight of the flange.
NOTE: - If running motors with 100% dry air and no lubrication, performance can be reduced with 5-15% at max output.
- To optimize life time for a lubrication free motor, use lubricated air if the application allows it.
AT L A S C O P C O A I R M OTO R S 27
Dimensions (mm)
All versions
Keyed shaft (-11)
Clockwise 9
9
7.5
151*
7.5
151*
31.5 119.5*
A/F 34
31.5 119.5*
A/F 34
20 Ø41.5
9
20 Ø41.5
9
5.5
5.5 4 h7
4 h7
BSP 1/4”
M4
BSP 1/4”
Anti-clockwise
M4
Ø12 h6
A/F 38
13.5
Ø12 h6
A/F 38
13.5
9
9
7.5
7.5
BSP 1/4”
3/8” -24 UNF
Ø 41.5
Ø18
A/F 34
7.5
Ø18
9
BSP 1/4”
BSP 1/4”
32.5
Optional mounting 32.5
2
2
60
60
0.7
R2 0.7
35
R2
Ø36 h7
35
Ø36 h7
90
90
35
34.7
35
34.7
10
5.5
10
5.5
M5 20 5
M5 20 5 21
42.7 21
50
50 42.7
Foot Flange
Ordering No. 4430 0162 80 Ordering No.
4110 0878 85 with holes
4110 0878 80 without holes
LZB33- L- A0030
LZB33- L- AV0030 230
230 *
LZB33- L- AR0026 34.5 195
34.5 195*
*) - 32 mm 30 17 7
LZB33-L-A013-20 30 17 7
25
LZB33-L-A007-20 25
LZB33-L-A005-202
2
5 h7
5 h7
54 h6
Ø41.5
16.1
Ø42
Ø14 h6
M4
54
Ø41.5
70
Ø14
16.1
Ø42
M4
70
Ø6.5
Thread length 12
Ø6.5
Thread length 12
28 AT L A S C O P C O A I R M OTO R S
Dimensions (mm)
32.8 19
Ø 7 (4x)
-0.2
Ø 70 js7
0
Ø 105
Ø 70 90º (x4)
0
2.5-0.5
9 Ø 85
IECff130
32.8 19
Ø10 (4x)
-0.2
Ø110js7
0
Ø160
2.5 0
-0.5
9 Ø130
AT L A S C O P C O A I R M OTO R S 29
VANE MOTORS LZB34-RL
Stainless steel and lubrication free
0.25 – 0.39 kW
0.34 – 0.52 hp
Material in parts:
• Back head, casing and front part stainless steel:
ISO 683/XIII Type 17, SS 14 2346, DIN 17440 X12CrNiS188
• Outgoing shaft and gear rim stainless steel:
ISO 683/XIII Type 9b, SS 14 2321, DIN 17440 X22CrNi17
• 100% Silicon free
• Grease that conforms to Food Grade regulations
30 AT L A S C O P C O A I R M OTO R S
Dimensions (mm) Conversion factor 1 mm = 0.04 inch
155.2*
31.5 123.7*
BSP 1/4”
30
Reversible
9 25
Ø41.5
9
3
4 h7
M4
A/F 34
A/F 38
Ø12 h6
7.5
13.5
Ø15
9
*) +34.5 mm for
LZB34-RL-A013 LZB34-RL-AR009
LZB34-RL-A007 LZB34-RL-AR005
LZB34-RL-A005 LZB34-RL-AR004
Optional mounting
Foot Flange
Ordering No. 4430 0855 80 Ordering No. 4430 0850 80
AT L A S C O P C O A I R M OTO R S 31
LZB33-L, LZB34-RL: Performance curves at air pressure 6.3 bar (91 psi)
Non-reversible (A and AV)
4000 8000 12000 16000 20000 24000 r/min 1000 2000 3000 4000 5000 6000 r/min 500 1000 1500 2000 2500 3000 3500 r/min
kW Nm LZB33-L-A026 l/s kW Nm LZB33-L-A013 l/s kW Nm LZB33-L-A007 l/s
0.40 0.40 0.40
0.35 7 10.5 0.35 14 10.5 0.35 28 10.5
0.30 6 9.0 0.30 12 9.0 0.30 24 9.0
0.25 5 7.5 0.25 10 7.5 0.25 20 7.5
0.20 4 6.0 0.20 8 6.0 0.20 16 6.0
0.15 3 4.5 0.15 6 4.5 0.15 12 4.5
0.10 2 3.0 0.10 4 3.0 0.10 8 3.0
0.05 1 1.5 0.05 2 1.5 0.05 4 1.5
500 1000 1500 2000 2500 3000 r/min 200 400 600 800 1000 1200 1400 r/min 100 200 300 400 500 600 700 800 r/min
kW Nm LZB33-L-A005 l/s kW Nm LZB33-L-A0030 l/s kW Nm LZB33-L-A0020 l/s
0.40 32 0.40 0.40 80
0.35 28 10.5 0.35 10.5 0.35 70 10.5
0.30 24 9.0 0.30 9.0 0.30 60 9.0
0.25 20 7.5 0.25 50 7.5 0.25 50 7.5
0.20 16 6.0 0.20 40 6.0 0.20 40 6.0
0.15 12 4.5 0.15 30 4.5 0.15 30 4.5
0.10 8 3.0 0.10 20 3.0 0.10 20 3.0
0.05 4 1.5 0.05 10 1.5 0.05 10 1.5
100 200 300 400 500 600 r/min 50 100 150 200 250 300 350 400 r/min 40 80 120 160 200 240 r/min
kW Nm LZB33-L-A0015 l/s kW Nm LZB33-L-A0011 l/s kW Nm LZB33-L-A0008 l/s
0.40 120 0.40 0.40
0.35 105 10.5 0.35 140 10.5 0.35 210 10.5
0.30 90 9.0 0.30 120 9.0 0.30 180 9.0
0.25 75 7.5 0.25 100 7.5 0.25 150 7.5
0.20 60 6.0 0.20 80 6.0 0.20 120 6.0
0.15 45 4.5 0.15 60 4.5 0.15 90 4.5
0.10 30 3.0 0.10 40 3.0 0.10 60 3.0
0.05 15 1.5 0.05 20 1.5 0.05 30 1.5
40 80 120 160 200 r/min 20 40 60 80 100 120 140 r/min 20 40 60 80 100 r/min
kW Nm LZB33-L-A0007 l/s kW Nm LZB33-L-A0005 l/s kW Nm LZB33-L-A0004 l/s
0.40 240 0.40 320 0.40
0.35 210 10.5 0.35 280 10.5 0.35 10.5
0.30 180 9.0 0.30 240 9.0 0.30 9.0
0.25 150 7.5 0.25 200 7.5 0.25 500 7.5
0.20 120 6.0 0.20 160 6.0 0.20 400 6.0
0.15 90 4.5 0.15 120 4.5 0.15 300 4.5
0.10 60 3.0 0.10 80 3.0 0.10 200 3.0
0.05 30 1.5 0.05 40 1.5 0.05 100 1.5
5 10 15 20 25 30 35 r/min 4 8 12 16 20 24 r/min
32 AT L A S C O P C O A I R M OTO R S
LZB33-L, LZB34-RL: Performance curves at air pressure 6.3 bar (91 psi)
4000 8000 12000 r/min 1000 2000 3000 4000 r/min 400 800 1200 1600 2000 2400 r/min
kW Nm LZB33-L-AR019 l/s kW Nm LZB33-L-AR009 l/s kW Nm LZB33-L-AR005 l/s
0.30 6 0.30 12 0.30
0.25 5 10 0.25 10 10 0.25 20 10
0.20 4 8 0.20 8 8 0.20 16 8
0.15 3 6 0.15 6 6 0.15 12 6
0.10 2 4 0.10 4 4 0.10 8 4
0.05 1 2 0.05 2 2 0.05 4 2
400 800 1200 1600 2000 r/min 200 400 600 800 1000 r/min 100 200 300 400 500 r/min
kW Nm LZB33-L-AR004 l/s kW Nm LZB33-L-AR0026 l/s kW Nm LZB33-L-AR0015 l/s
50 100 150 200 250 300 350 400 r/min 40 80 120 160 200 240 r/min 30 60 90 120 150 r/min
kW Nm LZB33-L-AR0011 l/s kW Nm LZB33-L-AR0008 l/s kW Nm LZB33-L-AR0006 l/s
0.30 90 0.30 120 0.30
Torque
kW Nm LZB33-L-AR0002 l/s kW Nm LZB33-L-AR0001 l/s
Nm
Conversion factors
Power
4 8 12 16 20 r/min 3 6 9 12 15 r/min
AT L A S C O P C O A I R M OTO R S 33
VANE MOTORS LZB33-L-LR
Low speed, low torque, lubrication free
and reversible
LZB34-RL-LR
Stainless steel, low speed, low torque,
lubrication free and reversible
Maximum permitted torque 14 Nm (10.3 lb ft)
For applications where low speed and high torque are required LZB33
high torque/low speed motors should be considered, see page 36. Within
their working range these motors have a very steep torque curve. Speed
and air consumption are relatively constant regardless of the load.
Stainless steel version:
• 100% Silicon free
• Grease that conforms to Food Grade regulations
EX certification valid for fixture mounted use only with a For optional stainless steel motor cell, vane kits and other
maximum surrounding temperature of +40°C (104°F). accessories see chapter Accessories.
Data at air pressure 6.3 bar (91 psi)
Air
Free speed consumption Weight Shaft
Model at free speed loading
Lubrication free r/min l/s cfm kg lb code 1) ATEX code Ordering No.
Reversible (Keyed shaft)
LZB33-L-LR200-11 180 9.9 21.0 1.25 2.78 c Ex II 2GD c T6 IIC T85°C 8411 0308 62
LZB33-L-LR44-11 42 9.9 21.0 1.55 3.44 c Ex II 2GD c T6 IIC T85°C 8411 0308 54
LZB33-L-LR20-11 18 9.9 21.0 1.55 3.44 c Ex II 2GD c T6 IIC T85°C 8411 0308 47
LZB33-L-LR10-11 10 9.9 21.0 1.8 4.0 c Ex II 2GD c T6 IIC T85°C 8411 0308 39
Stainless steel Reversible (Keyed shaft)
LZB34-RL-LR200-11 180 9.9 21.0 1.45 3.2 c Ex II 2GD c T6 IIC T85°C 8411 0343 44
LZB34-RL-LR44-11 42 9.9 21.0 1.75 3.86 c Ex II 2GD c T6 IIC T85°C 8411 0343 51
LZB34-RL-LR20-11 18 9.9 21.0 1.75 3.86 c Ex II 2GD c T6 IIC T85°C 8411 0343 69
LZB34-RL-LR10-11 10 9.9 21.0 2.0 4.4 c Ex II 2GD c T6 IIC T85°C 8411 0343 77
1)
For Shaft loading curves, see page 16.
NOTE: - If running motors with 100% dry air and no lubrication, performance can be reduced with 10-20% at free speed.
- To optimize life time for a lubrication free motor, use lubricated air if the application allows it.
45 0.14
0.25 50
40
0.12
35 40
0.20
0.10
30
25 0.15 30 0.08
Limit
20 Limit
0.06
0.10 20
15
0.04
10 0.05 10
0.02
5
0 0 0 0
0 20 40 60 80 100 120 140 160 180 200 r/min 35 36 37 38 39 40 41 r/min
Nm LZB33-L-LR20 kW Nm LZB33-L-LR10 kW
80 0.12 80 0.06
70 70
0.10 0.05
60 60
0.08 0.04
50 50
40 0.06 40 0.03
30 30
Limit 0.04 Limit 0.02
20 20
0.02 0.01
10 10
0 0 0 0
17 18 r/min 8.8 9.0 r/min
34 AT L A S C O P C O A I R M OTO R S
Dimensions LZB33-L-RL, LZB34-RL-LR (mm) Conversion factor 1 mm = 0.04 inch
9 20
9 Ø41.5
5.5 4 h7
7.5
M4
A/F 38
Ø12 h6
A/F 34
13.5
9
Optional mounting
60
0.7
R2
35
Ø36 h7
90
34.7
35
Flange
10
Ordering No.
M5 20 5.5
4110 0878 85 with holes
50 42.7 32.5 5
21
4110 0878 80 without holes
Foot
Ordering No. 4430 0162 80
M4
A/F 34
A/F 38
13.5
9
Ø12 h6
Optional mounting
2
60
0.7
35
R2
Ø36 h8
82
34.7
35
10
M5 20 Ø5.5
50 42.7 33.5 5 21
Foot Flange
Ordering No. 4430 0855 80 Ordering No. 4430 0850 80
AT L A S C O P C O A I R M OTO R S 35
VANE MOTORS LZB33-L
High torque and lubrication free
0.23 – 0.37 kW
0.31 – 0.50 hp
EX certification valid for fixture mounted use only with a
maximum surrounding temperature of +40°C (104°F).
36 AT L A S C O P C O A I R M OTO R S
Dimensions (mm) Conversion factor 1 mm = 0.04 inch
43.7 250.2
7.5
40 43.7 95.7
7.5
A/F 34
Ø60
30 40 95.7
9
9
9
A/F 34
5 Ø60
30 6 h7
9
5 250.2
250.2 6 h7
Ø41.5
A/F 55
Ø19 j6
BSP 1/4”
21.5
Ø30
43.7
7.5
M5
43.7
7.5
Ø41.5
40 95.7
Reversible
A/F 55
Ø19 j6
BSP 1/4” 40 95.7
21.5
Ø30
34
M5
Ø60
A/F34
Ø60
9 30
A/F
99
30
9 55
THREAD DEPTH 15mm 66h7
h7
9
9
Ø41.5
7.5
55
THREAD DEPTH 15mm
Ø19j6j6
Ø41.5
BSP 1/4”
1/4”
21.5
A/F55
Ø30
BSP
21.5
M5
Ø30
M5
Ø19
A/F
A/F 34
A/F 55
7.5
9
9
9
A/F 34
A/F 55
9
9
9
BSP 1/4”
34
55
A/F34
A/F55
A/F
A/F
99
Optional mounting
BSP 1/4” 14
BSP 1/4”
80
14
50
80 0
R3
Ø60 h8
118
50
44
14
50
0
14
R3
Ø60 h8
10
118
M6 80 30
80
44
60 61.2 Ø10.3
50
42 3
5050
35
10
0
R330 30
h8
M6
Ø60h8
118
118
Ø60
60 61.2 Ø10.3
42 3
4444
5050
35
1010
M6 30
Foot M6 30 Flange
60 61.2 Ø10.3
Ordering No. 4430
60 0178 80 61.2
Ordering
42 3No. 4430 0569 84
Ø10.3
42 3 35
35
320.2
LZB33-L-A0002 258.2LZB33-L-AR0001
R36.5
62
Ø83 h9
Ø62 K6
M8 6 holes 18 mm DEEP
Ø41.5
M10
60 48 75 95.7
50 25
245
Ø60
320.2 9
320.2 6P
62 258.2
R36.5
Ø62 K6
60 95.7
M10
48 75
5 50 25
50 Ø28j6
25
Ø60
5
24
Ø60
8h7
9
6P9
6P
R36.5
R36.5
h9h9
K6K6
31
Ø41.5
M10
Ø83
2.7
Ø62
Ø41.5
M10
Ø83
Ø62
24 Ø28j6
24
8h7
2.7
2.7
31
Ø28j6
Ø28j6
8h7
8h7
3131
AT L A S C O P C O A I R M OTO R S 37
LZB33-L high torque motors: Performance curves at 6.3 bar (91 psi)
Non-reversible (A)
40 80 120 160 200 240 r/min 40 80 120 160 200 r/min 20 40 60 80 100 120 140 r/min
Reversible (AR)
5 10 15 20 25 30 4 8 12 16 20 r/min 3 6 9 12 15 r/min
38 AT L A S C O P C O A I R M OTO R S
LZB VANE MOTORS
VANE MOTORS LZB33-LB
Brake module, lubrication free and reversible
LZB34-RLB
Stainless steel, brake module, lubrication free
and reversible
0.23 – 0.25 kW
0.31 – 0.34 hp
Braking torque from 0.55–520 Nm.
The brake is activated by spring force and released by air pressure.
Stainless steel version:
• 100% Silicon free
• Grease that conforms to Food Grade regulations
The brake needs minimum 3 bar to release. Performance curves same as standard motors, see page 33 and 38.
NOTE: - If running motors with 100% dry air and no lubrication, performance can be reduced with 5-15% at max output.
- To optimize life time for a lubrication free motor, use lubricated air if the application allows it.
AT L A S C O P C O A I R M OTO R S 39
Dimensions (mm) Conversion factor 1 mm = 0.04 inch
4h7 4h7
4h7
55
7.5
55
7.5
7.5
Ø41.5
Ø41.5
Ø41.5
Ø41.5
55
13.5
13.5
M4 M4
M4
7.5
Ø41.5
Ø41.5
9
9
13.5
9
Ø12h6
9
LZB34-RLB-AR005
7.5
Ø41.5
Ø41.5
13.5
LZB34-RLB-AR004
M4
60
9
35
35
Ø36 h7
Ø36 h8
BSP 1/4” 60 Thread length 8
82
90
A/F 34 60 0.7
34.7
R2
35
35
0.7
35
35
R2
Ø36 h7
2 2
10
Ø36 h8
35
35
20
82
Ø36 h7
5.5 5.5
90
Ø36 h8
50 42.7 32.5 5 33.5 5
82
M5
90
34.7
35
35
21 21
34.7
35
2
35
2
10
20 2 2
10
5.5 5.5
M5 50 42.720 32.5 5 5.5 33.5 5 5.5
M5 50 42.7 32.5 5 21 33.5 5 21
60 21 21
0.7
R2 LZB33-LB, Flange LZB34-RLB, Stainless flange
35
35
Foot
Ø36 h7
Ø36 h8
Ordering No. 4430 0162 80 Ordering No. 285 Ordering No. 4430 0850 80
82
90
35
35
35
Stainless 9foot 30 17 4110 0878 80 without holes 100 14
2 2
10
Ordering
9 No. 4430 0855 80 25 7
20 5.5 5.5
M5 50 2 42.7 32.5 5 33.5 5
21 21
285
35 285
250
Ø42 h9
7.5
16.28
Ø41.5
55
M4
70
250
54
9 30 35 17 100 14
9
9 9 25 30 177 100 14
Reversible
9
with brake 2512 Thread depth 7
LZB33-LB-AR0026 BSP 1/4” 2
Ø6.5
A/F 34
2
5 h7
285
Ø42 h9
7.5
16.28
Ø41.5
Ø14 j6
55
16.1
16.28M4
54 70
250
54
35
Ø42 h9
7.5
Ø41.5
55
9
M4
70
9 30 17 100 14
9
9 25 7
12 Thread depth
2
BSP 1/4” 12 Thread depth
Ø6.5
A/F 34 5 h7
Ø42 h9
7.5
16.28
Ø41.5
5 h7
55
M4
70
54
9
Ø14 j6
16.1
Ø14 j6
16.1
12 Thread depth
BSP 1/4”
Ø6.5
A/F 34
5 h7
Ø14 j6
16.1
40 AT L A S C O P C O A I R M OTO R S
Dimensions (mm) Conversion factor 1 mm = 0.04 inch
LZB33-LB-AR0006
304.5
30
9 44 150
5
9 40 100 14 Ø60
7.5
M5
30
A/F 55
Ø41.5
65
Ø30
5
9
7.5
M5
A/F 55
Ø41.5
65
Ø30
9
BSP 1/4”
304.5
Ø19 j6
9 44 150
Ø19 j6
21.5
9 40 100 14 Ø60
30
5
Optional mounting
7.5
M5
14
A/F 55
Ø41.5
65
Ø30
14
9
80
BSP 1/4” 80
0
R3
Ø60 h8
Ø60 h8
10
M6 30
Ø19 j6
21.5
60
44
61.2
42 3
10
M6 30
60 61.2
42 314
80
Foot 0
Flange
R3
Ø60 h8
375
10
62 313
M6 30 M8 6 holes 18 mm DEEP
60 48 75 150
60 61.2
5 50 25 100 14
42 3
Ø60
9
6P
R36.5
70
Ø62 K6
375
Ø41.5
83 h9
M10
62 313
24
Reversible with brake 60 150
M8 6 holes 18 mm DEEP
48 75
LZB33-LB-AR0004
50 25 100 14
LZB33-LB-AR0003
5
Ø60
2.7
LZB33-LB-AR0002 6P
9
Ø28j6
LZB33-LB-AR0001
R36.5
8h7
Ø62 K6
Ø41.5
83 h9
375
M10
31
62 313
M8 6 holes 18 mm DEEP
24 60 48 75 150
5 50 25 100 14
Ø60
9
6P
R36.5
2.7
70
54
Ø62 K6
Ø41.5
83 h9
M10
Ø28j6
24 8h7
31
2.7
Ø28j6
8h7
16.1
31
AT L A S C O P C O A I R M OTO R S 41
VANE MOTORS LZB42
0.50 – 0.71 kW
0.67 – 0.95 hp
EX certification valid for fixture mounted use only with a
maximum surrounding temperature of +40°C (104°F).
42 AT L A S C O P C O A I R M OTO R S
Dimensions (mm) Conversion factor 1 mm = 0.04 inch
BSP BSP
1/4” 1/4” 42 167
14.3
42 167
40
209 209 LZB42-A005 LZB42-AR004
14.3
BSP 1/4” 40
10.5
3042 42 Ø46
10.5
14.3
14.314.3
4 30 42 167 Ø46 5 h7
4 40 40 Ø46 5 h7
4 5 h7
10.5
10.510.5
M5
A/F 41 BSP 1/2” 4 4 30 5 h75 h7
M5
Ø16 j6
A/F 41
Ø46
Ø17
18
M5
Ø16 j6 Ø16 j6
A/F 41 A/F 41
10 4 5 h7
Ø17
1818
Reversible
Ø16 j6
A/F 41
A/F 10
41
A/F 41 BSP BSP
1/2” 1/2”
Ø17
1010
Ø17Ø17 M5
M5 M5
j6 j6
41 41
Ø17
18
18 18
10 10 BSP 1/4”
Ø16Ø16
A/F A/F
BSP 1/4”
10 10 10 THREAD DEPTH 15 mm
10.6
THREAD DEPTH 15 mm
10.6
10 BSP BSP
1/4” 1/4” THREAD DEPTH 15 mm
10.6
10.5
BSP 1/4”
10.5
OptionalTHREAD
mountings
10.5
THREAD
DEPTH
DEPTH
15 mm
15 mm 10
10.6
10.610.6
60 10
BSP 1/2” 60 15 mm
THREAD DEPTH 10
60
10.5
10.510.5
BSP 1/2”
A/F 41 BSP 1/2” 3
A/F 41 R2
40
3 10 10
A/F 41 R23
4040
60 60
Ø45 h8
R2 10
Ø45 h8 Ø45 h8
BSP BSP
1/2” 1/2”
96
60
Ø45 h8
9696
A/F 41
A/F 41 BSP 1/2”
23 23
40
R R
38
40
40 40
A/F 41
4040
3838 R2
3
h8 h8
10
40 40 96
96 96
Ø45Ø45
1010
39 2 Ø8.3
M5 20 26
Ø8.3
39 2
40
38
38 38
M5 20 26 Ø8.3
M5 20 47.2 39 2
50 26
10
10 10
50 47.2
50 47.2 Ø8.3Ø8.3
M5 M5 20 20 39 39 2 2
26 26
Foot Ordering No. 4430 0575 80 20 39 Flange
2 Ordering No. 4430
Ø8.30490 81
M5 50 50 256 47.2 47.2 26
256
44 50 256 47.2
44
44 40
40 256 256
Clockwise 40 30 28 80
3044 44 256 28 80 Ø60
LZB42-A0030 5
30
44
28 80 Ø60
40 40 Ø60
LZB42-A0020 5
5 6 h7
30 40
30 28 28 80 80 6 h7
LZB42-A0012 Ø60 Ø60 6 h7
30 28 80
5 5 Ø60
Ø19 j6
A/F 55
21.5
55 A/F Ø46
M5
Ø30
Ø19 j6 Ø19 j6
6 h76 h7
A/F 5555
Reversible
21.5
5
Ø46
M5
Ø30
Ø19 j6
21.5
Ø46
M5
6 h7
Ø30
LZB42-AR0025
LZB42-AR0015
j6 j6
55 55
21.5
21.521.5
Ø46
Ø46
M5
M5 M5
Ø30
Ø30Ø30
Ø19Ø19
A/F
A/F A/F
LZB42-AR0010
Ø46
THREAD
THREAD
DEPTH
DEPTH
15mm
15mm
THREAD DEPTH 15mm
14
14
14
80
80
Optional mountings
80 R3
0 14 14
50
0
R30
5050
14
Ø60 h8
R3
118
Ø60 h8 Ø60 h8
80 80
118
Ø60 h8
118
80 0 0
50
R3 R3
44
50
50 50
5050
4444
0
10
R3
h8 h8
50 50 118
118118
1010
M6
Ø60Ø60
M6 Ø10.3
M6 60 30 42 3
50
60 35 Ø10.3
44
44 44
30 42 3
60 30 61.2 3 35 Ø10.3
10
10 10
42
M6 M6 61.2 35
61.2
M6 60 60 30 30 Ø10.3
Ø10.3
42 42 3 3
35 35 Ø10.3
60 30
61.2 61.2 42 3
35
61.2
Foot Ordering No. 4430 0178 80 326.5 Flange Ordering No. 4430 0569 84
326.5
62 326.5 264.5
62 264.5
62 60 264.5
60 326.5
326.5
60 50 48 97 80
Clockwise 50
62 62 48 326.5 264.5
97 264.5 80
LZB42-A0008 50 48 25 97 27.7 80 M8 (x6)
5 62 25 264.5 27.7 M8 (x6)
60 60 DEPTH 18mm
Ø30
5
LZB42-A0005 25 27.7
Ø60
M8 (x6) 18mm
DEPTH
Ø30
5 50 60
Ø60
50 48 48 80 80
R36.5 5 75 R36.5 F 75
97 97 DEPTH 18mm
Ø30
8 h7
Ø60
5
A/FØ46 /FA7/F57
50 25 2548 80 8 h7
A/
97 27.727.7 M8 (x6)
M8 (x6)
Reversible 5 5 8 h7
6 P9
DEPTH
DEPTH
18mm18mm
7R36.5
Ø30
Ø30Ø30
25 27.7 M8 (x6)
6 P9
Ø60
Ø60Ø60
A
Ø83 h9
Ø62 K6
Ø28 j6
LZB42-AR0006 5
R36.5
M10
31
6 P9
DEPTH 18mm
Ø83 h9 Ø83 h9
5
K6K6
Ø28 j6 Ø28 j6
8 h78 h7
M10
Ø46
3131
LZB42-AR0004
Ø83 h9
Ø28 j6
7 /F
Ø62
M10
Ø46
A/F A
R36.5
8 h7
Ø62
6 P9
6 P96 P9
R36.5
h9
h9 K6
K6 K6
j6 j6
M10
M10M10
Ø46
Ø46Ø46
31
31 31
Ø28Ø28
Ø83
Ø83Ø62
Ø62Ø62
2.7
2.7
THREAD DEPTH
2.7 24mm
THREAD DEPTH 24mm
THREAD DEPTH 24mm
2.7 2.7
THREAD
THREAD
DEPTH
DEPTH
24mm
24mm
2.7
THREAD DEPTH 24mm
AT L A S C O P C O A I R M OTO R S 43
LZB42: Performance curves at air pressure 6.3 bar (91 psi)
Non-reversible (A)
4000 8000 12000 16000 20000 24000 r/min 1000 2000 3000 4000 5000 6000 7000 r/min 1000 2000 3000 4000 5000 r/min
500 1000 1500 2000 2500 r/min 300 600 900 1200 1500 r/min 200 400 600 800 1000 r/min
100 200 300 400 500 600 r/min 50 100 150 200 250 300 350 r/min 40 80 120 160 200 r/min
Torque
Nm
Power Conversion factors
kW Air cons.
Power l/s 1 kW = 1.34 hp
Max
output 1 Nm = 0.74 Ibf - ft
Air. cons. 1 l/s = 2.1 cfm
1 hp = 0.75 kW
Torque
at max
Torque
1 Ibf-ft = 1.36 Nm
output
1 cfm = 0.47 l/s
Speed r/min
44 AT L A S C O P C O A I R M OTO R S
LZB42: Performance curves at air pressure 6.3 bar (91 psi)
4000 8000 12000 16000 r/min 1000 2000 3000 4000 5000 r/min 500 1000 1500 2000 2500 3000 3500 r/min
400 800 1200 1600 2000 r/min 200 400 600 800 1000 1200 r/min 100 200 300 400 500 600 700 r/min
100 200 300 400 500 r/min 40 80 120 160 200 240 r/min 20 40 60 80 100 120 140 160 r/min
Torque
Nm
Power Conversion factors
kW Air cons.
Power l/s 1 kW = 1.34 hp
Max
output 1 Nm = 0.74 Ibf - ft
Air. cons. 1 l/s = 2.1 cfm
1 hp = 0.75 kW
Torque
at max
Torque
1 Ibf-ft = 1.36 Nm
output
1 cfm = 0.47 l/s
Speed r/min
AT L A S C O P C O A I R M OTO R S 45
VANE MOTORS LZB46
0.59 – 0.84 kW
0.79 – 1.13 hp
EX certification valid for fixture mounted use only with a
maximum surrounding temperature of +40°C (104°F).
46 AT L A S C O P C O A I R M OTO R S
Dimensions (mm) Conversion factor 1 mm = 0.04 inch
M5
40
LZB46-A010 LZB46-AR004
A/F 41
Ø16 j6
30
Ø17
18
LZB46-A005 4
Ø46
LZB46-AV200 5 h7
LZB46-AV065
M5
A/F 41
Ø16 j6
LZB46-AV040 THREAD DEPTH 15 mm
Ø17
18
LZB46-AV025
LZB46-AV015
-20 UNF
4 40 40 R2 195
40
30 30 5 h7
Ø45 h8
215 22
Ø46 Ø46
A/F 41 Ø17
4 4 10
172”96
60 42 173
M5
215 15 5 h7 5 h7
38
40
40
Ø16 j6
42 173
Ø17
18
M5
M5
3
30 R2
10
40
40 Ø46
A/F 41
A/F 41
Ø16 j6
4
Ø16 j6
Ø17
Ø45 h8
18
Ø17
18
M5 30 20 39 2 Ø8.3
Ø17
Ø46 5 h7
96
4 26
50 47.2
5 h7
M5
BSP 1/4”
38
A/F 4140
THREAD DEPTH 15 mm
Ø16 j6
10
M5
Ø17
18
262
A/F 41
THREAD DEPTH DEPTH
THREAD 15 mm 15 mm
Ø16 j6
39 Ø8.3
M5 4420 2
Ø17
18
172” -20 UNF
26 195
14.3
50 47.2
40 28 86
BSP 1/4” 22
15 6 h7
R2 15
40
14.3
96 -20 UNF
40 28 86 195
M5
Ø45 h8
23 23
Ø17
30 R R
96
A/F 41 BSP 1/2” 22
40
Ø19 j6
40
195
A/F 55
21.5
10
-20Ø46
Ø60
Ø30
Ø45 h8
Ø45 h8
60
Ø17
172”
172” Ø17
15
38
40
22
All versions Clockwise/60 Reversible
96
10
10.5
6 h7
10
15
Anti-clockwise 3
LZB46-AR0025
38
40
R2
38
40
M5
40
10 39 Ø8.3
Clockwise/ M5 20 2
10
10
Ø19 j6
A/F 55
Ø17
21.5
10
96 Ø46
40
Ø30
96
Anti-clockwise 15mm Keyed 2shaft (-11)
50 47.2 Ø8.3 Ø8.3
20 39
BSPBSP
1/4”1/4” LZB46-A0020
M5 M5 LZB46-AR0010
THREAD DEPTH
20 39 2
Ø45 h8
26 26
Ø17
38
47.2 40
BSP 1/4”
BSP 1/4” LZB46-A0012
50 50 47.2
262
10
38
40
10
LZB46-AV0030
10.6
44
20 39 2 262 Ø8.3 244
10
10 M5 262
14.3
26
LZB46-AV0020
3/4”-16UNF
40 14 28 86
BSP 1/4” THREAD DEPTH 15mm
10.5
44
47.2 44 Ø8.3 26
50
M5 30 20 39 2
BSP 1/4” LZB46-AV0012 26
14.3
22
14.3
80 40 40 28 28 86 86 Ø60
50 47.2
BSP 1/4” 5 30 30 262
BSP 1/2”
10.6
10.5
Ø60 Ø60 6 h7
50
A/F 41 44 244
0
5 5 R3 14262
3/4”-16UNF
Ø60 h8
M5
14.3
10.5
118
26
10.5
6 h7
10.5
40 28 86 6 h7
Ø30
A/F 41 BSP 1/2” 44
Ø19 j6
22
A/F 55
21.5
80
Ø46
Ø30
30
14.3
44
M5
M5
Ø46 50
40 28 86
A/F 41 A/F 41 BSP 1/2” Ø60
Ø19 j6
BSP 1/2” BSP 1/2”
Ø19 j6
A/F 55
21.5
A/F 55
5 30
21.5
Ø46
10
Ø30
Ø30
50
A/F 41 30 Ø60
10.5
0 6 h7
M6 R3
Ø60 h8
5 61.2 Ø10.3
118
10 3
Ø30
42
M5
10.5
60 35 6 h7
A/F 41 10
44
10 BSP10
1/2”
50
Ø19 j6
A/F 55
Ø19 j621.5
BSP 1/4” THREAD DEPTH 15mm
M5
Ø46
Ø30
A/F 10
41 10 BSP 1/2”
10
A/F 55
21.5
30
Ø46
Ø30
BSP 1/4”
BSP 1/4” THREAD DEPTH
THREAD 15mm 15mm
DEPTH
Reversible M6 332.5
61.2
3
Ø10.3
Threaded shaft (-12)
10.6
60 42 35
10
Optional mountings 62 270.5 244
3/4”-16UNF
10 14 97
10.5
26
10.6
60 48 86
10.6
10 244
BSP 1/4” THREAD DEPTH 15mm 244
27.7 22
3/4”-16UNF
80 50 25
3/4”-16UNF
10 M8
14 14 26 (x6) 26
10.5
10.5
Ø30
50
62 270.5
5
A/F 41
10.6
0
50 /F 7
R3 244 8 h7
Ø60 h8
BSP 1/2”
118
BSP 1/2” 60 48 97 86
3/4”-16UNFA
118R36.5
50
Ø30
14
10.6
A/F 41 A/F 41
10.5
6 P9
0 26
50 25 R3 R30 27.7 M8 (x6)
244
Ø60 h8
44
Ø62 K6
Ø60 h8
Ø28 j6
50
118
22
3/4”-16UNF
80
M10
14
Ø46
Ø30
10.5
THREAD DEPTH
Ø30
26
31
5
18mm
Ø60
Ø30
10
44
22
44
50
5
30
50
BSP 1/2” 80
F7
M6
50
A/F 41 61.2 8 h7
0 Ø10.3
A/
R3
10
3
R36.5
10
BSP 1/2” 42
Ø60 h8
60 30 30 35
6 P9
118
50
A/F 41 M6
118Ø30
Ø10.3 Ø10.3
Ø28 j6
2.7 R 3
Ø60 h8
M10
3
Ø46
24mm 42
44
60 42
31
35
50
60 35 Ø83 h9
Ø30
44
10
50
30 332.5
M6 61.2 Ø10.3
Foot Ordering No. 4430 01784280 Flange Ordering No. 4430 0569 84
10
62 30 3 270.5
60
M6THREAD DEPTH 332.5 332.5 35
24mm 2.7 60 61.2 48 97 86 Ø10.3
62 62 42 3
270.5 270.5 Ø83 h9
60 27.7 35
50 25 M8 (x6)
60 60 48 48 97 97 86 86
5 THREAD DEPTH
50 25 25332.5 27.7 27.7 18mm
Ø60
50Ø30 M8 (x6)M8
Clockwise/ (x6)
75
62
5 270.5 THREAD DEPTH DEPTH
THREAD 8 h7
5 /F
5 332.5
Anti-clockwise
F7 A
18mm 18mm
Ø60
Ø30
R36.5
Ø60
Ø30
5
6 P9
60 6248 97 86
F7
270.5 8 h7 8 h7
LZB46-A0008
Ø62 K6
Ø28 j6
A/
A/
27.7
M10
R36.5
50 25
Ø46
R36.5
60 48 97 86 M8 (x6)
31
6 P9
6 P9
5
K6
Ø28 j6
27.7
Ø28 j6
50 25 M8 (x6)
M10
18mm
M10
Ø46
Ø60
Ø30
5 Ø46
31
LZB46-AV0008
31
5
Ø62
THREAD DEPTH
F7
5 8 h7
18mm
A/
Ø60
Ø30
LZB46-AV0005
R36.5
F7
THREAD DEPTH
6 P9
8 h7
24mm 2.7
Ø62 K6
A/
Ø28 j6
Ø83 h9
R36.5
M10
Ø46
6 P9
31
Ø46
31
LZB46-AR0006
LZB46-AR0004 THREAD DEPTH
24mm 2.7
Ø83 h9
THREAD DEPTH
24mm 2.7
Ø83 h9
AT L A S C O P C O A I R M OTO R S 47
VANE MOTORS LZB46-RL
Stainless steel and lubrication free
0.60 – 0.84 kW
0.80 – 1.13 hp
Material in parts:
• Casing and front part stainless steel: ISO 683/XIII Type 17,
SS 14 2346, DIN 17440 X12CrNiS188
• Outgoing shaft and gear rim stainless steel: ISO 683/XIII Type 9b,
SS 14 2321, DIN 17440 X22CrNi17
• 100% Silicon free
• Grease that conforms to Food Grade regulations
For optional stainless steel motor cell, vane kits and other
accessories see chapter Accessories.
48 AT L A S C O P C O A I R M OTO R S
Dimensions (mm) Conversion factor 1 mm = 0.04 inch
LZB46-RL-A200 LZB46-RL-AR170
LZB46-RL-A065 LZB46-RL-AR050 218
LZB46-RL-A040 LZB46-RL-AR030 218 42 176
LZB46-RL-A025 LZB46-RL-AR020
42 176 40
40 30
LZB46-RL-A015 LZB46-RL-AR010 4
Ø46
30
LZB46-RL-A010 LZB46-RL-AR007
4
Ø46 5 h7
Ø17
LZB46-RL-A005 LZB46-RL-AR004 5 h7
Ø17
M5
A/F 41
M5
Ø16 j6
18
A/F 41
Ø16 j6
18
A
THREAD DEPTH 15 mm
THREAD DEPTH 15 mm
40
Ø17 5 h7
3
Ø45 h8
R2 42 176 40
40
40
96
Ø 45 h8
Ø45M5
h8
3040 96
Ø46
96
A/F 41
Ø16 j6
4
38
30
40
18
Ø46 5 h7
4
Ø17
38
40
M5 10
40
5 h7
Ø17
10
M5 20
39 2 Ø8.3
A/F 41
26
M5
M5 20
Ø16 j6
39 50 47.2 Ø8.3
2
18
2
A/F 41
26 28
Ø16 j6
50 47.2 THREAD DEPTH 15 mm
18
BSP 1/4” 44.2
” 218
Foot Ordering
42 No. 4430 0575 81 176 Aluminium Stainless steel
263.5
40
263.5
FlangeTHREAD
Ordering No. 4430 0490 81
DEPTH 15 mm 10
Flange Ordering No. 4430 1483 80
44
14.3
30
44 THREAD
60 DEPTH 15 mm Ø46
40 28
14.3
4 86
40 28 86 5 h7
Ø17
30 3
R2 Ø60
40
30 10
M5
5
Ø45 h8
10.5
Ø60
All versions 60 10
A/F 41
96
5 Ø16 j6 6 h7
Keyed shaft (-11)
18
60 6 h7
38
M5
4040
A/F 41 BSP 1/2” R2
3
Clockwise/
M5
10
Ø19 j6
3
A/F 55
Clockwise Reversible
21.5
1/2”
Ø45 h8
R2
Ø46
Ø30
40
Anti-clockwise
Ø19 j6
96
A/F 55
20
21.5
Ø45 h8
M5
Ø46
Ø8.3
Ø30
10 39 2 LZB46-RL-A0030 LZB46-RL-AR0025
96
26
38
THREAD 47.2
10 DEPTH 15 mm 50
40
LZB46-RL-A0020 LZB46-RL-AR0015
38
10
BSP
BSP 1/4”
40
1/4”
LZB46-RL-A0012 LZB46-RL-AR0010
10
1/4” M5 20
39 2 Ø8.3
THREAD DEPTH 15mm
M5 20
47.2 26
10 50 263.5 39 2 Ø8.3
10.6
THREAD
60
DEPTH 15mm 47.2 26
50
BSP 1/4” 44
14.3
10.5
BSP 1/4” 40 28 86
3
R2
40
30 263.5 14
Ø45 h8
Ø60
263.5
96
BSP 1/2” 44 14
14.3
5
10.5
A/F 41 80
1/2” 4044 28 6 h7
14.3
86
38
40
80
40
30 28 86
10
M5
A/F 41
50 Ø19 j6 50
BSP 1/2” Ø60
30 R30
Ø60 h8
M5 20
A/F 55
50
21.5
0 539 Ø8.3
10.5
Ø46
118
Ø60
Ø30
2
R3 26 6 h7
Ø60 h8
47.2 5
10.5
50
118
10
44
6 h7
10M5
A/F 41
10
44
BSP 1/2”
Reversible
50
M5
BSP
BSP 1/4”
Ø19 j6
A/F 41
A/F 55
1/2”
21.5
30
Ø46
Ø30
M6
10
Ø19 j6
A/F 55
61.2
21.5
30 Ø10.3
Ø46
Ø30
10
M6 263.5 42 3
61.2 60 DEPTH 15mm
THREAD 35
10 10 3 Ø10.3
44 60 42
10.6
35
40 10 BSP 1/4” 28 86
BSP 1/4”
10.5
30
THREAD DEPTH 15mm Ø60
5 14
M5 10.6
A/F 41 80
10.5
10.5
Ø19 j6
A/F 55
21.5
14
50
Ø46
Ø30
0
R3
Ø60 h8
BSP 1/2” 14
118
A/F 41 80
BSP 1/2”
A/F 41 80
44
5050
30
10
30R 0
Ø60 h8
50
118
Ø10.3
118
60 42 3
44
50
35
44
50
10
30
M6
10
61.2
30 8 Ø10.3
Optional mountings M6 1460
61.2
42 3
Ø10.3
35 Ø10.3
60 42 3
80 35
50
50
0
R3
Ø 60 h8
Ø60 h8
118
118
44
50
50
10
30
M6
61.2 Ø10.3 3
60 42 3 35
35 47
AT L A S C O P C O A I R M OTO R S 49
LZB46, LZB46-RL: Performance curves at air pressure 6.3 bar (91 psi)
Non-reversible (A and AV)
4000 8000 12000 16000 20000 24000 r/min 1000 2000 3000 4000 5000 6000 7000 r/min 1000 2000 3000 4000 5000 r/min
kW Nm LZB46-A025 l/s kW Nm LZB46-A015 l/s kW Nm LZB46-A010 l/s
1.0 15 1.0 25 1.0
500 1000 1500 2000 2500 3000 r/min 300 600 900 1200 1500 r/min 200 400 600 800 1000 r/min
kW Nm LZB46-A005 l/s kW Nm LZB46-A0030 l/s kW Nm LZB46-A0020 l/s
1.0 1.0 100 1.0
100 200 300 400 500 600 r/min 50 100 150 200 250 300 350 r/min 40 80 120 160 200 240 r/min
kW Nm LZB46-A0012 l/s kW Nm LZB46-A0008 l/s kW Nm LZB46-A0005 l/s
1.0 1.0 1.0 750
Torque
Nm
Power Conversion factors
kW Air cons.
Power l/s 1 kW = 1.34 hp
Max
output 1 Nm = 0.74 Ibf - ft
Air. cons. 1 l/s = 2.1 cfm
1 hp = 0.75 kW
Torque
at max
Torque
1 Ibf-ft = 1.36 Nm
output
1 cfm = 0.47 l/s
Speed r/min
50 AT L A S C O P C O A I R M OTO R S
LZB46, LZB46-RL: Performance curves at air pressure 6.3 bar (91 psi)
4000 8000 12000 16000 20000 r/min 1000 2000 3000 4000 5000 6000 r/min 500 1000 1500 2000 2500 3000 3500 r/min
kW Nm LZB46-AR020 l/s kW Nm LZB46-AR010 l/s kW Nm LZB46-AR007 l/s
0.7 0.7 21 0.7 35
0.6 12 0.6 18 0.6 30
0.5 10 20 0.5 15 20 0.5 25 20
0.4 8 16 0.4 12 16 0.4 20 16
0.3 6 12 0.3 9 12 0.3 15 12
0.2 4 8 0.2 6 8 0.2 10 8
0.1 2 4 0.1 3 4 0.1 5 4
400 800 1200 1600 2000 r/min 200 400 600 800 1200 1600 r/min 100 200 300 400 500 600 700 800 r/min
kW Nm LZB46-AR004 l/s kW Nm LZB46-AR0025 l/s kW Nm LZB46-AR0015 l/s
0.7 0.7 0.7 140
0.6 60 0.6 90 0.6 120
0.5 50 20 0.5 75 20 0.5 100 20
0.4 40 16 0.4 60 16 0.4 80 16
0.3 30 12 0.3 45 12 0.3 60 12
0.2 20 8 0.2 30 8 0.2 40 8
0.1 10 4 0.1 15 4 0.1 20 4
100 200 300 400 500 r/min 50 100 150 200 250 r/min 20 40 60 80 100 120 140 160 r/min
kW Nm LZB46-AR0010 l/s kW Nm LZB46-AR0006 l/s kW Nm LZB46-AR0004 l/s
0.7 0.7 0.7
0.6 240 0.6 0.6 600
0.5 200 20 0.5 20 0.5 500 20
0.4 160 16 0.4 400 16 0.4 400 16
0.3 120 12 0.3 300 12 0.3 300 12
0.2 80 8 0.2 200 8 0.2 200 8
0.1 40 4 0.1 100 4 0.1 100 4
Torque
Nm
Power Conversion factors
kW Air cons.
Power l/s 1 kW = 1.34 hp
Max
output 1 Nm = 0.74 Ibf - ft
Air. cons. 1 l/s = 2.1 cfm
1 hp = 0.75 kW
Torque
at max
Torque
1 Ibf-ft = 1.36 Nm
output
1 cfm = 0.47 l/s
Speed r/min
AT L A S C O P C O A I R M OTO R S 51
VANE MOTORS LZB54
0.79 – 1.20 kW
1.06 – 1.61 hp
EX certification valid for fixture mounted use only with a
maximum surrounding temperature of +40°C (104°F).
52 AT L A S C O P C O A I R M OTO R S
Dimensions (mm) Conversion factor 1 mm = 0.04 inch
243.5
BSP 3/8”
4430 243.5
89.5
15
Ø60
5 40
16
44
30 40 89.5 6 h7
16
15
Ø60
A/F 50 BSP 1/2” 5 30 89.5
M5
15
Ø60
A/F 55
Ø19 j6
21.5
5 6 h7
M5 Ø30
Ø56
A/F 50 13.5 6 h7
Reversible BSP 1/2”
A/F 55
j6 j6
21.5 21.5
13.5 A/F 50
Ø30
BSP
BSP1/2”
Ø56
3/8”
M5
BSP 3/8”
Ø19 Ø19
A/F 55
243.5
Ø30
Ø56
13.5
THREAD DEPTH 15mm
13.5 44
13.5 BSP 3/8”
13.5 40
16
11
BSP 3/8”
30 THREAD DEPTH 15mm 89.5
15
11 15
M5
14
Optional mountings
A/F 55
Ø19 j6
21.5
Ø30
Ø56
50
14
0
R3
Ø60 h8
A/F 50
13.5 BSP 1/2” 80
118
13.5 A/F 50 BSP 1/2” 80
BSP 3/8”
50 50
44
50
0
R3
Ø60 h8
118118
30
10
Ø60 h8
M6 30 R
44
61.2 Ø10.3
50 50
60 42 3
11
44
35
10
30
10
M6
15
M6
60 61.230 Ø10.3
61.2 42 3 Ø10.3
60 4214 3 35
35
50
0
R3313.5
Ø60 h8
118
313.5
62 50 25 251.5
44
62 251.5
50
5 60 48.2 74.8 89.5
Ø60
Clockwise/
Ø30
10
LZB54-A0025 LZB54-AR0020 35
Ø30
5
Ø60
Ø30
Ø62 K6
LZB54-A0017 LZB54-AR0012
M10
Ø56
LZB54-A0012 LZB54-AR0009
LZB54-AV0025
Ø62 K6
Ø62 K6
M10
Ø56
M10
Ø56
LZB54-AV0017 313.5
LZB54-AV0012 THREAD DEPTH 62 251.5
24mm 2.7
60 48.2 74.8 89.5
THREAD DEPTH 50 25
THREAD DEPTH
24mm
24mm 2.7 2.7
5
Ø60
Ø30
M8 (x6)
THREAD DEPTH
18mm
Ø62 K6
M10
Ø56
5
F7
M8(x6)
M8 (x6) 8 h7
A/
THREADDEPTH
THREAD DEPTH
18mm
R36.5
18mm
6 P9
5
A/ 75
F7
88h7
h7
Ø28 j6
F
31
A/
R36.5
R36.5
P9
THREAD DEPTH
66P9
24mm 2.7
j6
28j6
31
31
ØØ28
Ø83 h9
M8 (x6)
Ø83 h9
Ø83THREAD
h9 DEPTH
18mm
75
8 h7
F
A/
R36.5
6 P9
Ø28 j6
31
Ø83 h9
AT L A S C O P C O A I R M OTO R S 53
VANE MOTORS LZB54-LB
Brake module, lubrication free and
reversible
0.79 – 0.82 kW
1.05 – 1.10 hp
Braking torque from 15–200 Nm.
The brake is activated by spring force and released by air pressure.
54 AT L A S C O P C O A I R M OTO R S
Dimensions (mm) Conversion factor 1 mm = 0.04 inch
324
44 280
Reversible 40 128 19
13.5 30
13.5 Ø60
324
5
BSP 3/8” 44 280
40 128 19
13.5
M5
30
74
11
A/F 55
13.5 Ø60
Ø30
Ø56
15
5
BSP 3/8”
BSP 1/2”
M5
11
A/F 55
Ø30
Ø56
15
6 h7
BSP 1/2”
Optional mountings
Ø19 j6
21.5
A/F 50 THREAD DEPTH 15mm 89.5
14
80 6 h7
50
0
Ø19 j6
R3
21.5
Ø60 h8
118
14
44
50
10
80 30
M6
60 61.2 Ø10.3
3
50
0 42
R3 35
Ø60 h8
118
44
Foot Ordering No. 4430 0178 80 Flange Ordering No. 4430 0569 84
50
10
M6 30
60 61.2 Ø10.3
42 3
393.5 35
Reversible with brake 62 331.5
LZB54-LB-AR0020
60 48.2
LZB54-LB-AR0012
13.5 50 25 128 19
LZB54-LB-AR0009
13.5
5
BSP 3/8” Ø30 393.5
62 331.5
60 48.2
A/F 70
Ø62 K6
11
M10
Ø56
13.5 50 25 128 19
15
13.5
5
BSP 3/8” Ø30
BSP 1/2”
A/F 50 THREAD DEPTH
24mm 2.7 154.8 89.5
A/F 70
Ø62 K6
11
M10
Ø56
15
BSP 1/2”
M8 (x6)
A/F 50 THREAD DEPTH THREAD DEPTH
24mm 2.7 154.8 89.5
18mm
5
F7
8 h7
A/
R36.5
6 P9
Ø28 j6
31
M8 (x6)
THREAD DEPTH
18mm
5
F7
8 h7
A/
R36.5
6 P9
Ø83 h9
Ø28 j6
31
Ø83 h9
AT L A S C O P C O A I R M OTO R S 55
LZB54: Performance curves at air pressure 6.3 bar (91 psi)
Non-reversible (A and AV)
4000 8000 12000 16000 20000 r/min 1000 2000 3000 4000 5000 6000 r/min 500 1000 1500 2000 2500 3000 3500 r/min
kW Nm LZB54-A020 l/s kW Nm LZB54-A010 l/s kW Nm LZB54-A007 l/s
1.4 21 1.4 1.4 70
1.2 18 30 1.2 30 1.2 60 30
1.0 15 25 1.0 25 1.0 50 25
0.8 12 20 0.8 40 20 0.8 40 20
0.6 9 15 0.6 30 15 0.6 30 15
0.4 6 10 0.4 20 10 0.4 20 10
0.2 3 5 0.2 10 5 0.2 10 5
400 800 1200 1600 2000 2400 r/min 200 400 600 800 1000 1200 r/min 100 200 300 400 500 600 700 r/min
kW Nm LZB54-A005 l/s kW Nm LZB54-A0025 l/s kW Nm LZB54-A0017 l/s
1.4 1.4 1.4 280
1.2 90 30 1.2 180 30 1.2 240 30
1.0 75 25 1.0 150 25 1.0 200 25
0.8 60 20 0.8 120 20 0.8 160 20
0.6 45 15 0.6 90 15 0.6 120 15
0.4 30 10 0.4 60 10 0.4 80 10
0.2 15 5 0.2 30 5 0.2 40 5
100 200 300 400 500 r/min 50 100 150 200 250 300 r/min 40 80 120 160 200 r/min
kW Nm LZB54-A0012 l/s
1.4 350
1.2 300 30
1.0 250 25
0.8 200 20
0.6 150 15
0.4 100 10
0.2 50 5
Torque
Nm
Power Conversion factors
kW Air cons.
Power l/s 1 kW = 1.34 hp
Max
output 1 Nm = 0.74 Ibf - ft
Air. cons. 1 l/s = 2.1 cfm
1 hp = 0.75 kW
Torque
at max
Torque
1 Ibf-ft = 1.36 Nm
output
1 cfm = 0.47 l/s
Speed r/min
56 AT L A S C O P C O A I R M OTO R S
LZB54: Performance curves at air pressure 6.3 bar (91 psi)
4000 8000 12000 r/min 1000 2000 3000 4000 r/min 400 800 1200 1600 2000 2400 r/min
kW Nm LZB54-AR015 l/s kW Nm LZB54-AR008 l/s kW Nm LZB54-AR005 l/s
1.0 20 1.0 1.0
400 800 1200 1600 2000 r/min 200 400 600 800 1000 r/min 100 200 300 400 500 r/min
kW Nm LZB54-AR004 l/s kW Nm LZB54-AR0020 l/s kW Nm LZB54-AR0012 l/s
1.0 1.0 150 1.0 250
50 100 150 200 250 300 350 400 r/min 40 80 120 160 200 240 r/min 20 40 60 80 100 120 140 r/min
kW Nm LZB54-AR0009 l/s
1.0
0.8 400
0.6 300 30
0.4 200 20
0.2 100 10
20 40 60 80 100 r/min
Torque
Nm
Power Conversion factors
kW Air cons.
Power l/s 1 kW = 1.34 hp
Max
output 1 Nm = 0.74 Ibf - ft
Air. cons. 1 l/s = 2.1 cfm
1 hp = 0.75 kW
Torque
at max
Torque
1 Ibf-ft = 1.36 Nm
output
1 cfm = 0.47 l/s
Speed r/min
AT L A S C O P C O A I R M OTO R S 57
VANE MOTORS LZB66
1.41 – 1.87 kW
1.89 – 2.51 hp
EX certification valid for fixture mounted use only with a
maximum surrounding temperature of +40°C (104°F).
Compact mounting
Data at air pressure 6.3 bar (91 psi)
Speed Torque Min Air
Max at max at max starting Stall Free consumption
output output output torque torque speed at max Weight Shaft
Model output loading
Lubricated kW hp r/min Nm lb-ft Nm lb-ft Nm lb-ft r/min l/s cfm kg lb code 1) ATEX code Ordering No.
Clockwise rotation (Keyed shaft)
LZB66-A0025-15 1.80 2.41 125 139 103 205 151 278 205 230 34 72 5.3 11.7 h Ex II 2GD c T6 IIC T85°C 8411 0600 18
LZB66-A0017-15 1.80 2.41 75 227 167 337 249 454 335 145 34 72 5.3 11.7 h Ex II 2GD c T6 IIC T85°C 8411 0600 26
Reversible (Keyed shaft)
LZB66-AR0020-15 1.41 1.89 115 117 86 151 111 233 172 200 31 66 5.3 11.7 h Ex II 2GD c T6 IIC T85°C 8411 0601 09
LZB66-AR0012-15 1.41 1.89 70 191 141 249 184 382 282 120 31 66 5.3 11.7 h Ex II 2GD c T6 IIC T85°C 8411 0601 17
1) For Shaft loading curves, see page 16.
58 AT L A S C O P C O A I R M OTO R S
Dimensions (mm) Conversion factor 1 mm = 0.04 inch
M5
40
Ø19 j6
A/F 55
263.3
21.5
Ø30
30
263.3
14.7
44 219.3 Ø60
G 3/8” 44 219.3
5 40
6 h7
40
30
G 3/4” Ø60
30
18.7
M5
A/F 55 G 3/8” THREAD DEPTH 15mm Ø60
Ø19 j6
A/F 55
21.5
5
Ø30
G 3/8” 6 h7
14.7
5
6 h7
Reversible
18.7
M5
Ø19 j6
A/F 55
21.5
18.7
M5
Ø30
Ø19 j6
A/F 55
G 3/4”
14.7
21.5
13.5
Ø30
13.5 14
G 3/8”
80
G 3/4”
A/F 55 G 3/4” THREAD DEPTH 15mm
50
A/F 55 THREAD DEPTH 15mm 0
R3
14
Ø60 h8
13.5
118
Optional mounting
14.7
13.5 14
44
50
G 3/8”
10
80
13.5 M6 30
13.5 13.5 G 3/4” 60 61.2 14 Ø10.3
50
A/F 55 42 3
G 3/8” 0 35
R3
14
14
Ø60 h8
13.5
118
G 3/8” 80
14.7
80
44
50
50
0
10
R3
14
Ø60 h8
50
0 30
118
M6
R3
14
Ø60 h8
14.7
118
60 3
44
A/F 55 42
50
14.7
333.5 35
44
10
50
62
Foot
M6 Ordering No. 4430 0178
30 80 271.5 Flange Ordering No. 4430 0569 84
10
5
F7
Clockwise 333.5
A/
R 36.5
62 271.5
LZB66-A0025-11
6 P9
60.5 48 184.3
Ø62 K6
LZB66-A0017-11
M10
Ø30
Ø60
50 333.5 M8 (X6)
LZB66-A0012-11 62 333.5 271.5
THREAD DEPTH
18 mm
5
5
F7
62
60.5 48 271.5 184.3
A/
Reversible 60.5
50 48 184.3 M8 (X6)
R 36.5
THREAD
6 P9
DEPTH 50 THREAD
M8 (X6) DEPTH
LZB66-AR0020-11 5 2.7
Ø83 h9 18 mm DEPTH
Ø62 K6
24mm THREAD
75
M10
Ø30
A/ Ø60
LZB66-AR0012-11 5 75/F 18 mm
FA
8h
R 36.5
LZB66-AR0009-11
6 P9
R 36.5
Ø62 K6
6 P9
M10
Ø28 j6
Ø30
Ø60
Ø62 K6
31
THREAD
M10
Ø30
Ø60
DEPTH Ø83 h9
24mm 2.7
THREAD 8h
DEPTH Ø83 h9
THREAD
24mm 2.7
DEPTH
Ø28 j6
Ø83 h9
24mm 2.7
8h 31
338.6
8h
100.8
Ø28 j6
31
55.6
Ø28 j6
Ø80 h11
31
45.2
5/16” -18 UNC (x6)
38.1 THREAD DEPTH 18mm
338.6
2.9
100.8
R28.6
Clockwise
Ø68.3 - 00.2
55.6
Ø60 h10
Ø80 h11
Ø20
45.2 338.6
LZB66-A0025-15 338.6 5/16” -18 UNC (x6)
100.8
38.1
M5
55.6 100.8
2.955.6 Ø80 h11
45.2
5/16” -18 UNC (x6) Ø80 h11
Reversible
R28.6
45.2
38.1 DEPTH 15mm 26
THREAD
Ø68.3 - 00.2
THREAD DEPTH
(x6)18mm
Ø60 h10
R28.6
M6 (x6)
THREAD DEPTH 12mm
2.9 4.762 h7
Ø68.3 - 0.2
Ø60 h10
R28.6
Ø68.3 - 00.2 0
Ø20
Ø60 h10
21.2
Ø20
26
THREAD DEPTH 15mm
M5
M6 (x6)
THREAD DEPTH 12mm
M6 (x6)
THREAD DEPTH 12mm
4.762 h7
26
THREAD DEPTH 15mm
A/F 26
72
THREAD DEPTH 15mm
21.2
A/F 72
4.762 h7 0
Ø19.05 - 0.013
4.762 h7
21.2
21.2
Ø19.05 - 00.013
Ø19.05 - 00.013
AT L A S C O P C O A I R M OTO R S 59
VANE MOTORS LZB66
With right angle
1.79 kW
2.40 hp
EX certification valid for fixture mounted use only with a
maximum surrounding temperature of +40°C (104°F).
60 AT L A S C O P C O A I R M OTO R S
Dimensions (mm) Conversion factor 1 mm = 0.04 inch
LZB66-A005-16
52 35
Ø 60
52
371
G 3/8"
18.7
14.7 EXH
3/4" Square
G 3/4" Ø 27
A/F 55
Ø 65.7
LZB66-A025-16
52 35
Ø 60
Ø 86
52
424
G 3/8" 140
18.7
14.7 EXH
15.5
8.5 4.5 M6
23 20
Ø10
G 3/4" 3/4" Square
A/F 55
27
65.7
AT L A S C O P C O A I R M OTO R S 61
LZB66: Performance curves at air pressure 6.3 bar (91 psi)
Non-reversible (A)
4000 8000 12000 16000 r/min 1000 2000 3000 4000 5000 r/min 500 1000 1500 2000 2500 3000 r/min
kW Nm LZB66-A020 l/s kW Nm LZB66-A010 l/s kW Nm LZB66-A007 l/s
2.0 2.0 75 2.0
0.8
1.6 20
12 30 0.8
1.6 30
20 30 0.8 60 30
45 0.4
1.2 109 15
45 0.4
1.2 15 15
45 0.4 30 15
30 0.8 6 30 0.8 10 30
400 800 1200 1600 2000 2400 r/min 200 400 600 800 1000 r/min 100 200 300 400 500 600 700 r/min
15 kW
0.4 Nm
3 LZB66-A005 l/s
15 kW
0.4 Nm
5 LZB66-A0025 l/s
15 kW Nm LZB66-A0017 l/s
2.0 150 2.0 2.0 500
000 16000 r/min 1.6 120 1000 2000 3000 4000 5000 r/min 500 1000 1500 2000 2500 3000 r/min
1.6 1.6 400
l/s kW Nm LZB66-A010 l/s kW Nm LZB66-A007 l/s
1.2
2.0 90
75 45 1.2 300
2.0 45 1.2 300 45
0.8
1.6 60
60 30 200
0.8 120
1.6 30 0.8 200 30
45 0.4
1.2 30
45 15
45 0.4 100
1.2 90 15
45 0.4 100 15
0.8 300
1.6 30 0.8 400
1.6 100 30 0.8 200 30
45 1.2 150
0.4 300 15
45 0.4 300
1.2 50 45
15 0.4 100 15
100 120 r/min 50 100 150 200 250 r/min 20 40 60 80 100 120 140 r/min
Torque
Nm
Power Conversion factors
kW Air cons.
Power l/s 1 kW = 1.34 hp
Max
output 1 Nm = 0.74 Ibf - ft
Air. cons. 1 l/s = 2.1 cfm
1 hp = 0.75 kW
Torque
at max
Torque
1 Ibf-ft = 1.36 Nm
output
1 cfm = 0.47 l/s
Speed r/min
62 AT L A S C O P C O A I R M OTO R S
LZB66: Performance curves at air pressure 6.3 bar (91 psi)
4000 8000 12000 r/min 1000 2000 3000 4000 r/min 500 1000 1500 2000 2500 r/min
kW Nm LZB66-AR015 l/s kW Nm LZB66-AR008 l/s kW Nm LZB66-AR005 l/s
1.5 1.5 1.5 100
400 800 1200 1600 2000 r/min 200 400 600 800 1000 r/min 100 200 300 400 500 600 r/min
kW Nm LZB66-AR004 l/s kW Nm LZB66-AR0020 l/s kW Nm LZB66-AR0012 l/s
1.5 150 1.5 250 1.5
50 100 150 200 250 300 350 400 r/min 40 80 120 160 200 240 r/min 20 40 60 80 100 120 140 r/min
kW Nm LZB66-AR0009 l/s
1.5 500
1.2 400 40
0.9 300 30
0.6 200 20
0.3 100 10
20 40 60 80 100 r/min
Torque
Nm
Power Conversion factors
kW Air cons.
Power l/s 1 kW = 1.34 hp
Max
output 1 Nm = 0.74 Ibf - ft
Air. cons. 1 l/s = 2.1 cfm
1 hp = 0.75 kW
Torque
at max
Torque
1 Ibf-ft = 1.36 Nm
output
1 cfm = 0.47 l/s
Speed r/min
AT L A S C O P C O A I R M OTO R S 63
VANE MOTORS LZB77
2.35 – 2.80 kW
3.15 – 3.75 hp
EX certification valid for fixture mounted use only with a
maximum surrounding temperature of +40°C (104°F).
64 AT L A S C O P C O A I R M OTO R S
Dimensions (mm) Conversion factor 1 mm = 0.04 inch
R38.1
Ø85.5 h10
M6
Ø88.9 h9
23
Ø62.1
Ø100
THREAD DEPTH
A/F 70 16mm 2.7 A/F
80
Reversible
6.35 h7
19.35
28.15
19.35
Ø 77 Ø25.4 j6
70
12.43
23
BSP 1/2” OR NPTF 1/2”–14 Ø 40 Ø 95
127.5˚ 127.5˚
M5 Depth 10 (x3)
M32x1.5 Depth 15 10
AT L A S C O P C O A I R M OTO R S 65
LZB77: Performance curves at air pressure 6.3 bar (91 psi)
Non-reversible (A)
500 1000 1500 2000 2500 r/min 100 200 300 400 500 600 700 800 r/min 100 200 300 400 500 600 700 r/min
kW Nm LZB77-A005 l/s kW Nm LZB77-A004 l/s kW Nm LZB77-A0020 l/s
3.0 3.0 3.0 600
100 200 300 400 500 r/min 50 100 150 200 250 300 350 r/min 40 80 120 160 200 r/min
kW Nm LZB77-A0017 l/s
3.0 Torque
Nm
Power Conversion factors
2.5 750 75 kW Air cons.
Max
Power l/s 1 kW = 1.34 hp
2.0 600 60
output
1 Nm = 0.74 Ibf - ft
Air. cons.
1 l/s = 2.1 cfm
1.5 450 45
1 300 30
Torque
1 hp = 0.75 kW
Torque
at max
output
1 Ibf-ft = 1.36 Nm
0.5 150 15
1 cfm = 0.47 l/s
20 40 60 80 100 120 140 160 r/min For information about performance curves,
Speed r/min see page 7.
Reversible (AR)
500 1000 1500 2000 2500 r/min 100 200 300 400 500 600 700 800 r/min 100 200 300 400 500 600 700 r/min
kW Nm LZB77-AR004 l/s kW Nm LZB77-AR003 l/s kW Nm LZB77-AR0018 l/s
2.5 250 2.5 2.5 500
100 200 300 400 500 r/min 50 100 150 200 250 300 350 r/min 40 80 120 160 200 r/min
kW Nm LZB77-AR0015 l/s
2.5
Torque
Nm
2.0 600 80 Power
kW Air cons. Conversion factors
Power l/s
1.5 450
Max 1 kW = 1.34 hp
60 output
1 Nm = 0.74 Ibf - ft
Air. cons.
1.0 300 40 1 l/s = 2.1 cfm
66 AT L A S C O P C O A I R M OTO R S
ACCESSORIES FOR AIR MOTORS
Collet chuck and collets for LZB22-12 to LZB66-12 Safety remote control
Capacity
Type mm in Ordering No. Type Ordering No.
Collet holder cpl. 4110 0844 90 Safety remote control 4430 2218 80
Collet 3 4150 0081 00
Collet 5 4150 0075 01
Collet 6 4150 0075 00
Collet 8 5/16" 4150 0074 00
Collet 1/8" 4150 0082 00
Collet 5/32" 4150 0648 00
Collet 3/16" 4150 0649 00
Collet 1/4" 4150 0076 00
AT L A S C O P C O A I R M OTO R S 67
ACCESSORIES FOR AIR MOTORS
Stainless steel motor cell, LZB14 Stainless steel motor cell, LZB22
Air Motor Motor cell Air Motor Motor cell
Model Ordering No. Ordering No. Model Ordering No. Ordering No.
Clockwise rotation (Key shaft) Clockwise rotation (Key shaft)
LZB14-RL-A190-11 8411 0122 09 4430 2194 80 LZB22-RL-A120-11 8411 0219 11 4430 2304 83
LZB14-RL-A048-11 8411 0122 17 4430 2194 80 LZB22-RL-A049-11 8411 0219 29 4430 2304 83
LZB14-RL-A029-11 8411 0122 25 4430 2194 80 LZB22-RL-A036-11 8411 0219 37 4430 2305 83
LZB14-RL-A12-11 8411 0122 33 4430 2194 80 LZB22-RL-A022-11 8411 0219 45 4430 2304 83
LZB14-RL-A007-11 8411 0122 41 4430 2194 80 LZB22-RL-A011-11 8411 0219 52 4430 2304 83
Reversible (Key shaft) LZB22-RL-A008-11 8411 0219 60 4430 2305 83
LZB14-RL-AR140-11 8411 0122 58 4430 2194 84 LZB22-RL-A005-11 8411 0219 78 4430 2304 83
LZB14-RL-AR034-11 8411 0122 66 4430 2194 84 Reversible (Key shaft)
LZB14-RL-AR020-11 8411 0122 74 4430 2194 84 LZB22-RL-AR126-11 8411 0220 83 4430 2304 84
LZB14-RL-AR008-11 8411 0122 82 4430 2194 84 LZB22-RL-AR028-11 8411 0220 75 4430 2304 84
LZB14-RL-AR005-11 8411 0122 90 4430 2194 84 LZB22-RL-AR021-11 8411 0220 16 4430 2305 84
LZB22-RL-AR013-11 8411 0220 67 4430 2304 84
LZB22-RL-AR006-11 8411 0220 59 4430 2304 84
LZB22-RL-AR005-11 8411 0220 08 4430 2305 84
LZB22-RL-AR003-11 8411 0220 91 4430 2304 84
Stainless steel motor cell, LZB34 Stainless steel motor cell, LZB46
Air Motor Motor cell Air Motor Motor cell
Model Ordering No. Ordering No. Model Ordering No. Ordering No.
Clockwise rotation (Key shaft) Clockwise rotation (Key shaft)
LZB34-RL-A210-11 8411 0338 41 4430 2290 83 LZB46-RL-A200-11 8411 0472 15 4430 1076 83
LZB34-RL-A060-11 8411 0338 58 4430 2290 83 LZB46-RL-A065-11 8411 0472 23 4430 1076 83
LZB34-RL-A033-11 8411 0338 66 4430 2290 83 LZB46-RL-A040-11 8411 0472 31 4430 1076 83
LZB34-RL-A026-11 8411 0338 74 4430 2291 83 LZB46-RL-A025-11 8411 0472 49 4430 1206 80
LZB34-RL-A013-11 8411 0338 82 4430 2290 83 LZB46-RL-A015-11 8411 0470 82 4430 1076 83
LZB34-RL-A007-11 8411 0338 90 4430 2290 83 LZB46-RL-A010-11 8411 0471 08 4430 1076 83
LZB34-RL-A005-11 8411 0339 08 4430 2291 83 LZB46-RL-A005-11 8411 0471 16 4430 1206 80
Reversible (Key shaft) LZB46-RL-A0030-11 8411 0471 24 4430 1076 83
LZB34-RL-AR150-11 8411 0339 16 4430 2290 84 LZB46-RL-A0020-11 8411 0471 32 4430 1076 83
LZB34-RL-AR043-11 8411 0339 24 4430 2290 84 LZB46-RL-A0012-11 8411 0471 40 4430 1206 80
LZB34-RL-AR024-11 8411 0339 32 4430 2290 84 Reversible (Key shaft)
LZB34-RL-AR019-11 8411 0339 40 4430 2291 84 LZB46-RL-AR170-11 8411 0472 56 4430 1076 84
LZB34-RL-AR009-11 8411 0339 57 4430 2290 84 LZB46-RL-AR050-11 8411 0472 64 4430 1076 84
LZB34-RL-AR005-11 8411 0339 65 4430 2290 84 LZB46-RL-AR030-11 8411 0472 72 4430 1076 84
LZB34-RL-AR004-11 8411 0339 73 4430 2291 84 LZB46-RL-AR020-11 8411 0472 80 4430 1206 84
For the complete range LZB34-RLB- Ordering No. 4430 2291 84 LZB46-RL-AR010-11 8411 0471 57 4430 1076 84
LZB46-RL-AR007-11 8411 0471 65 4430 1076 84
LZB46-RL-AR004-11 8411 0471 73 4430 1206 84
LZB46-RL-AR0025-11 8411 0471 81 4430 1076 84
LZB46-RL-AR0015-11 8411 0471 99 4430 1076 84
LZB46-RL-AR0010-11 8411 0472 07 4430 1206 84
68 AT L A S C O P C O A I R M OTO R S
ACCESSORIES FOR AIR MOTORS
Vane sets, lubrication not needed
Motor Ordering No.
LZB14 4210 0479 97
LZB22 4110 0861 97
LZB33/34 4110 0621 97
LZB42 4430 0517 97
LZB46 4430 0525 97
LZB54 4430 0543 97
LZB66 4430 1355 97
LZB77 4430 1487 97
LZL03 4430 1327 97
LZL05 4430 0282 97
LZL15 4430 0290 97
LZL25 4430 0298 97
LZL35 4430 1086 97
NOTE: If running motors with 100% dry air and no lubrication, performan-
ce can be reduced by 5-15% at max output.
AT L A S C O P C O A I R M OTO R S 69
LZL
VANE MOTORS
70 AT L A S C O P C O A I R M OTO R S
AT L A S C O P C O A I R M OTO R S 71
LZL VANE MOTORS
Introduction
72 AT L A S C O P C O A I R M OTO R S
Shaft loading
Restrictors
LZL vane motors are supplied with internal restrictors in the
connection ports, to limit the maximum speed.
Mounting
LZL vane motors may be mounted in any position. To
facilitate this, a flange is integrated into the motor casing and
a foot mounting is available for some motor variants.
Fa Hose size up to 3m length
Connection and hose dimensions (N)
Inlet Outlet
Information on connection size and recommended1200 nipple and connec- Inlet Inlet connec- Outlet Outlet
hose dimensions for use with LZL vane motors is shown in tion hose* nipple* tion hose* nipple*
Table 2. These dimensions are valid for hose lengths up to Motor thread dia thread dia
size Used as BSP mm mm BSP mm mm
3 m. For lengths above 3 m, choose a hose one size larger.
1000
LZL03 Non-reversible 3/8 13 10.3 3/8 16 13.4
Reversible 3/8 16 13.4 3/8 16 13.4
LZL05 Non-reversible 1/2 13 10.3 1/2 20 17
800 Reversible 1/2 20 17 1/2 20 17
LZL15 Non-reversible 3/4 16 13.4 3/4 25 21.8
Reversible 3/4 25 21.8 3/4 25 21.8
600 LZL25 Non-reversible 1 20 17 1 32 28
Table 2
Reversible 1 32 28 1 32 28
LZL35 Non-reversible 1 1/4 20 17 1 1/4 32 28
400 Reversible 1 1/4 32 28 1 1/4 32 28
* Recommended minimum inner diameter
Fa
(N) 200
1200
1000 200 400 600 800 1000 1200 1400 1600 1800 2
800
LZL 35 A = 25 mm
LZL 25 A = 25 mm
LZL 15 A = 25 mm
600 LZL 05 A = 20 mm
LZL 03 A = 20 mm
400
200
Fr
200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 (N)
LZL 35 A = 25 mm
LZL 25 A = 25 mm
LZL 15 A = 25 mm Figure 2
LZL 05 A = 20 mm
LZL 03 A = 20 mm
AT L A S C O P C O A I R M OTO R S 73
LZL VANE MOTORS
1.05 – 6.5 kW
1.4 – 8.7 hp
4. 1. 2.
Power motors (P)
The power motors come in all five sizes and are designed to
give highest power and still maintain good low speed charac-
teristics. These motors are delivered with lube free vanes and
can theretofore operate without lubrication.
74 AT L A S C O P C O A I R M OTO R S
Low to medium speed motors (M)
5. 3. 6.
1. 2.
Stainless steel motors
Stainless steel motors are available in the size LZL05. They
are lube free and have the same features as the other lube
free motors. All external parts, including the output shaft,
are made of stainless steel, which makes the motors very
corrosionresistant and ideal for applications such as the food
industry, corrosive mixing and the chemical industry.
The material used in all external parts is ISO 683/Xlll Type 17,
SS 14 2346, DIN 17440 X 12CrNiS188.
EX certification valid for fixture mounted use only with a 1. Rubber hose valves for venting bearing and seals.
2. Lube free vanes.
maximum surrounding temperature of +40°C (104°F). 3. Double seals.
4. Vane pins.
5. Stainless steel.
AT L A S C O P C O A I R M OTO R S 75
1 2 3 4 5 6 7 8 9 10
G A
0.2
0.0
Rev.Ver
Rev.Ver
K A
J
LZL_CATALOG
LZL03-L-P-AC
I H
Drawing name
Model name
F F B
90°(4x)
R
E
C
B
P
L
D F-F F
45°
S
C
T N
M
LZL05-L-P-HUB
15°(2x)
U
O
A E
F
copied, used for manufacturing or communicated to any other person or company.
This document is our property and shall not without our permission be altered,
Tolerances, if not - - - - -
indicated, according to:
AC-STD - - - - -
Name Secrecy class
VANE MOTOR LZL03-L-P-AC LZL03
Material
- 1102 K/-
CAD
- Pro/E G
Scale Format Family Compare Drawing owner
1:1 A2 - 8411 1009 88
Model A B C D E F G H I J K L M N O P R S
TOO T U
Drawn Blank Replaces
D Öhlund - -
Cons.class Rev Status Designation Sheet 1 (1)
0 - - - - 1295 K/- 0 In Work
8411
Ø85 1009Ø7
70
Transferred from
LZL03-L-M/P-AC mm 124 Ø105 Ø70 j6 Ø16 j7 18 5 h9 40 30 2.0 2.5 8.5 M5x15 65 BSP ⅜” 36 Ø69 1 -
Mass/Volume Date
Note Pos. Modified from Date Intr. - - 2016-05-23
LZL03-L-M/P-IEC mm 124 Ø160 Ø110 j6 Ø14 j7 16 5 h9 30 20 2.0 3.5 8.5 M5x15 65 BSP ⅜” 36 Ø69 Ø130 Ø10 - -
LZL03-L-M/P-NEMA mm 124 Ø165.1 Ø114.3 Ø15.875 17.85 4.75 51.5 31.75 1.7 3.175 10 M5x15 65 BSP ⅜” 36 Ø69 Ø149.225 ⅜”-16 UNC 1 -
LZL03-L-M/P-NEMA inch 4.88 Ø6.5 Ø4.5 Ø0.625 0.703 0.187 2.03 1.25 0.07 0.125 0.39 M5x15 2.56 BSP ⅜” 1.42 Ø2.72 Ø5.875 ⅜”-16 UNC 0.04 -
LZL05-L-P-AC
Air motor mm 152 Ø105 Ø70 j6 Ø18 j7 20.5 6 h9 40 30 3.0 2.5 8.5 M5x15 81 BSP ½” 44 Ø76 Ø85 Ø7 - -
LZL05-L-M-AC
Measurements mm 152
(mm) Ø105 Ø70 j6factor
Conversion Ø16 j71 mm
18 = 0.04
5 h9 inch
40 30 2.0 2.5 8.5 M5x15 81 BSP ½” 44 Ø76 Ø85 Ø7 0.5 -
LZL05-L-M/P-IEC mm 152 Ø160 Ø110 j6 Ø14 j7 16 5 h9 30 20 2.0 3.5 8.5 M5x15 81 BSP ½” 44 Ø76 Ø130 Ø10 - -
LZL05-L-M/P-NEMA mm 152 Ø165.1 Ø114.3 Ø15.875 17.85 4.75 51.5 31.75 1 3.175 10 M5x15 81 BSP ½” 44 Ø76 Ø149.225 ⅜”-16 UNC 0.5 -
LZL05-L-M/P-NEMA inch 5.98 Ø6.5 Ø4.5 Ø0.625 0.703 0.187 2.03 1.25 0.04 0.125 0.39 M5x15 3.19 BSP ½” 1.73 Ø3 Ø5.875 ⅜”-16 UNC 0.02 -
LZL05-L-P-HUB mm 152 Ø84 Ø44.45 j6 Ø12.7 14.51 3.175 H7 45 12.3 6.8 16 8.5 - 81 BSP ½” 44 Ø76 Ø63.6 ¼"-20 UNC 15.5 4.1
LZL05-L-P-HUB inch 5.98 Ø3.31 Ø1.75 Ø0.5 0.57 0.125 1.77 0.5 0.3 0.63 0.335 - 3.19 BSP ½” 1.73 Ø3 Ø2.5 ¼"-20 UNC 0.61 0.161
LZL05-RL-P-IEC mm 152 Ø160 Ø110 j6 Ø14 j7 16 5 h9 30 20 2.0 3.5 8.5 M5x15 81 BSP ½” 44 Ø76 Ø130 Ø10 - -
LZL05-RL-P-NEMA mm 152 Ø165.1 Ø114.3 Ø15.875 17.85 4.75 51.5 31.75 1 3.175 10 M5x15 81 BSP ½” 44 Ø76 Ø149.225 ⅜”-16 UNC 0.5 -
LZL05-RL-P-NEMA inch 5.98 Ø6.5 Ø4.5 Ø0.625 0.703 0.187 2.03 1.25 0.04 0.125 0.39 M5x15 3.19 BSP ½” 1.73 Ø3 Ø5.875 ⅜”-16 UNC 0.02 -
LZL15-L-P-AC mm 181.5 Ø140 Ø95 j6 Ø22 j7 24.5 6 h9 52.5 40 5.0 3.0 12 M6x16 95 BSP 1" 54 Ø100 Ø115 Ø9 - -
LZL15-L-P-IEC mm 181.5 Ø200 Ø130 j6 Ø19 j6 21.5 6 h9 40.5 30 5.0 3.5 12 M6x16 95 BSP 1" 54 Ø100 Ø165 Ø12 - -
LZL15-L-P-NEMA mm 181.5 Ø165.1 Ø114.3 Ø15.875 17.85 4.75 51.5 31.75 1.5 3.175 12 M6x16 95 BSP 1" 54 Ø100 Ø149.225 ⅜”-16 UNC - -
LZL15-L-P-NEMA inch 7.15 Ø6.5 Ø4.5 Ø0.625 0.703 0.187 2.03 1.25 0.06 0.125 0.472 M6x16 3.74 BSP 1" 2.13 Ø3.94 Ø5.875 ⅜”-16 UNC - -
LZL25-L-P-AC mm 221 Ø160 Ø110 j6 Ø28 j7 31 8 h7 62.5 50 5.0 3 12 M10x22 118 BSP 1” 70 Ø120 Ø130 Ø10 - -
LZL25-L-P-IEC mm 221 Ø200 Ø130 j6 Ø24 j6 27 8 h7 49.5 40 5.0 3.5 12 M10x22 118 BSP 1" 70 Ø120 Ø165 Ø12 - -
LZL35-L-P-AC mm 248.5 Ø200 Ø130 j6 Ø28 j7 31 8 h7 60 50 5.0 3.5 14 M10x22 129 BSP 1¼" 70 Ø134 Ø165 Ø12 - -
LZL35-L-P-IEC mm 248.5 Ø250 Ø180 j6 Ø28 j6 31 8 h7 60 50 5.0 4.0 14 M10x22 129 BSP 1¼" 70 Ø134 Ø215 Ø14.5 - -
LZL35-P-IEC mm 248.5 Ø250 Ø180 j6 Ø28 j6 M10x22 60 4.0 - 5.0 50 14 129 134 BSP 1 1/4 70 Ø215 Ø14.5 31 8 h7
76 AT L A S C O P C O A I R M OTO R S
LZL: Performance curves at air pressure 6.3 bar (91 psi)
2000 4000 6000 8000 r/min 2000 4000 6000 r/min 2000 4000 6000 r/min
LZL03-L-M
LZL: Performance curves at air Throttled
pressure 6.3
with air flow bar (91 psi)
restrictor
Nm l/s
1.25 3.0 Curve idling speed
Low to medium speed 2.8 1400 rpm Torque 1400 rpm Air Cons.
1.0 2.6
LZL03-L-M 2.4 1200 rpm Torque 1200 rpm Air Cons.
0.75 2.2
Throttled with air flow restrictor
kW Nm LZL03-L-M l/s kW Nm LZL05-L-M / LZL05-RL-P l/s 2.0 1000 rpm Torque 1000 rpm Air Cons.
Nm l/s
4.0 2.0 7.5 0.5 1.8
1.25 3.0 Curve
800idling speed
rpm Torque 800 rpm Air Cons.
1.6
1.05 3.5 2.8 1400 rpm Torque
1.6 6.0 0.25 40 1.4 1400 rpm Air Cons.
1.0 2.6 600 rpm Torque 600 rpm Air Cons.
0.9 3.0 1.2
2.4 1200 rpm Torque 1200 rpm Air Cons.
0.75 2.5 25 1.2 4.5 30 1.0
0.75 200 400 600 2.2r/min
800 1000
0.6 2.0 20 2.0 1000 rpm Torque 1000 rpm Air Cons.
0.45 1.5 15 0.8 3.0 0.5 20 1.8
800 rpm Torque 800 rpm Air Cons.
1.6
0.3 1.0 10
0.4 1.5 0.25 10 1.4
5 600 rpm Torque 600 rpm Air Cons.
0.15 0.5 1.2
1.0
500 1000 1500 2000 2500 3000 r/min 500 1000 1500 2000
2002500400 r/min 800 1000 r/min
3000 600
LZL05-L-M
LZL03-L-M l/s kW Nm LZL05-L-M / LZL05-RL-P l/s Throttled with air flow restrictor
2.0 7.5 Nm l/s
1.75 4.0 Curve idling speed
1.6 6.0 40 1.5 3.5 1400 rpm Torque 1400 rpm Air Cons.
25 1.2 4.5 30 1.25 LZL05-L-M 3.0 1200 rpm Torque 1200 rpm Air Cons.
20 Throttled with air flow restrictor
1.0
0.8 3.0 20 Nm 2.5
l/s 1000 rpm Torque 1000 rpm Air Cons.
15 0.75
10 1.75 4.0
2.0 Curve
800idling speed
rpm Torque 800 rpm Air Cons.
0.4 1.5 10 0.5
5 1.5 3.5 1400 rpm Torque 1400 rpm Air Cons.
0.25 1.5 600 rpm Torque 600 rpm Air Cons.
1.25
000 1500 2000 2500 3000 r/min 500 1000 1500 2000 2500 3000 r/min 3.0
1.0 1200 rpm Torque 1200 rpm Air Cons.
1.0 200 400 600 800 1000 r/min
2.5 1000 rpm Torque 1000 rpm Air Cons.
0.75
Torque 2.0 800 rpm Torque 800 rpm Air Cons.
Nm 0.5
Power
kW Air cons. 0.25 1.5 600 rpm Torque 600 rpm Air Cons.
Max
Power l/s Conversion factors
1.0
output
1 kW = 1.34 hp 200 400 600 800 1000 r/min
Air. cons. 1 Nm = 0.74 Ibf - ft
1 l/s = 2.1 cfm
For information about performance curves, see page 7.
Torque
–––––
Torque
at max
output
1 hp = 0.75 kW
1 Ibf-ft = 1.36 Nm
---------
1 cfm = 0.47 l/s Performance with restrictors
Speed r/min
Performance without restrictors, (unrestricted)
AT L A S C O P C O A I R M OTO R S 77
LZL VANE MOTOR/GEAR Calculating sprocket or gearwheel dimensions
If it is intended to fit a sprocket, gearwheel or pulley onto the
UNIT COMBINATIONS output shaft, the radial load generated when running must be
within the permitted level.
Combined with helical gear units, LZL
The following formula is used to calculate the minimum dia-
vane motors can be used over a very wide meter of these components, to ensure the radial load does
torque and speed range. Gears have a ratio not exceed this limit.
range between 6.3:1 to 164.5:1, corresponding
to a speed range of 512 to 17 r/min and
Dmin = 2 x M x kt
output torque up to 1836 Nm at max. output. F
[m]
Operating speed
To avoid damage to seals the gear units should not be run
continuously above 4200 rpm.
Mounting
There are two options of mounting arrangement:
Foot or Flange as illustrated in Figure 5.
1. Foot 2. Flange
Figure 4
Shaft loading
The maximum allowable radial load on the output shaft of
Figure 5
each gear unit, at the halfway point on the shaft can be
obtained from the data tables for each model.
Temperature
The maximum permitted axial load is 20% of the table value
for radial load if full permitted radial load is occurring. If there The gear units can operate within an ambient temperature
is no radial load the maximum permissible axial load is 50% range of –20°C (–4°F) and +40°C (104°F).
of the table value for radial force.
If it is required to use a gear unit outside these temperature
limits please consult your local Atlas Copco representative.
78 AT L A S C O P C O A I R M OTO R S
Mounting position
Allowed mounting positions are shown below. Installing the
motor underneath the gear unit is not allowed.
B3 B5 B6 B51
B7 B53 B8 B52
V5 V1 V6 V3
NOTE: For some positions additional oil needs to be added to the gear box,
see service instructions for details
AT L A S C O P C O A I R M OTO R S 79
AIR MOTORS LZL05
with helical gear units
1.2 – 2.0 kW
1.7 – 2.6 hp
Model Ratio kW hp r/min Nm lb-ft Nm lb-ft r/min r/min l/s cfm kg lb N Ordering No.
LZL05-BF322-A-012 12.3 1.2 1.7 352 33 25 56 41 740 36 77 14 31 2360 8411 1808 40
LZL05-BF322-B-012 12.3 1.2 1.7 352 33 25 56 41 740 36 77 14 31 2360 8411 1808 57
Unrestricted* 12.3 2.0 2.6 512 36 27 56 41 740 54 114 14 31 2100
LZL05-BF322-A-018 18.2 1.2 1.7 238 49 36 83 61 500 36 77 14 31 2770 8411 1808 65
LZL05-BF322-B-018 18.2 1.2 1.7 238 49 36 83 61 500 36 77 14 31 2770 8411 1808 73
Unrestricted* 18.2 2.0 2.6 346 54 40 83 61 500 54 114 14 31 2450
LZL05-BF322-A-033 33.1 1.2 1.7 131 90 66 151 111 275 36 77 14 31 3370 8411 1808 81
LZL05-BF322-B-033 33.1 1.2 1.7 131 90 66 151 111 275 36 77 14 31 3370 8411 1808 99
Unrestricted* 33.1 2.0 2.6 190 97 72 151 111 275 54 114 14 31 3000
LZL05-BF322-A-060 59.4 1.2 1.7 73 161 119 271 200 153 36 77 14 31 4800 8411 1809 07
LZL05-BF322-B-060 59.4 1.2 1.7 73 161 119 271 200 153 36 77 14 31 4800 8411 1810 15
Unrestricted* 59.4 2.0 2.6 106 174.9 129 271 200 153 54 114 14 31 4280
LZL05-BF363-A-102 102.2 1.2 1.6 42 272 200 456 336 89 36 77 22 49 5650 8411 1810 23
LZL05-BF363-B-102 102.2 1.2 1.6 42 272 200 456 336 89 36 77 22 49 5650 8411 1810 31
Unrestricted* 102.2 1.9 2.6 62 295 217 456 336 89 54 114 22 49 5020
LZL05-BF363-A-140 139.8 1.2 1.6 31 372 274 624 460 65 36 77 22 49 5690 8411 1810 49
LZL05-BF363-B-140 139.8 1.2 1.6 31 372 274 624 460 65 36 77 22 49 5690 8411 1810 56
Unrestricted* 139.8 1.9 2.6 45 403 297 624 460 65 54 114 22 49 5060
*) Unrestricted, the motors should not be run without load
A = Foot mount
B = Flange mount
80 AT L A S C O P C O A I R M OTO R S
Air motor LZL05 with helical gear units type BF:
100 200 300 400 500 600 700 800 r/min 100 200 300 400 500 r/min 50 100 150 200 250 300 r/min
Torque
Nm
Power
kW Air cons.
Max
Power l/s Conversion factors
output
1 kW = 1.34 hp
Air. cons. 1 Nm = 0.74 Ibf - ft
1 l/s = 2.1 cfm
For information about performance curves, see page 7.
Torque
–––––
Torque
at max
output
1 hp = 0.75 kW
1 Ibf-ft = 1.36 Nm
---------
1 cfm = 0.47 l/s Performance with restrictors
Speed r/min
Performance without restrictors (unrestricted)
AT L A S C O P C O A I R M OTO R S 81
AIR MOTORS LZL15
with helical gear units
2.1 – 3.0 kW
2.9 – 4.1 hp
Model Ratio kW hp r/min Nm lb-ft Nm lb-ft r/min r/min l/s cfm kg lb N Ordering No.
LZL15-BF322-A-011 11.2 2.2 2.9 307 68 50 116 86 639 61 129 19 42 2530 8411 1810 61
LZL15BF322-B-011 11.2 2.2 2.9 307 68 50 116 86 639 61 129 19 42 2530 8411 1810 79
Unrestricted* 11.2 3.0 4.1 389 74 55 116 86 639 86 181 19 42 2310
LZL15-BF322-A-018 18.2 2.2 2.9 189 111 82 188 139 393 61 129 19 42 2970 8411 1810 87
LZL15-BF322-B-018 18.2 2.2 2.9 189 111 82 188 139 393 61 129 19 42 2970 8411 1810 95
Unrestricted* 18.2 3.0 4.1 239 121 89.3 188 139 393 86 181 19 42 2710
LZL15-BF322-A-033 33.1 2.2 2.9 104 202 149 343 253 216 61 129 19 42 3600 8411 1811 03
LZL15-BF322-B-033 33.1 2.2 2.9 104 202 149 343 253 216 61 129 19 42 3600 8411 1811 11
Unrestricted* 33.1 3.0 4.1 132 220 162 343 253 216 86 181 19 42 3300
LZL15-BF322-A-060 59.4 2.2 2.9 58 362 267 615 454 120 61 129 19 42 5150 8411 1811 29
LZL15-BF322-B-060 59.4 2.2 2.9 58 362 267 615 454 120 61 129 19 42 5150 8411 1811 37
Unrestricted* 59.4 3.0 4.1 73 395 291 615 454 120 86 181 19 42 4710
LZL15-BF363-A-102 102.2 2.1 2.9 34 609 449 1036 764 70 61 129 27 60 6040 8411 1811 45
LZL15-BF363-B-102 102.2 2.1 2.9 34 609 449 1036 764 70 61 129 27 60 6040 8411 1811 52
Unrestricted* 102.2 3.0 4.0 43 665 491 1036 764 70 86 181 27 60 5520
LZL15-BF613-A-165 164.5 2.1 2.9 21 981 723 1668 1230 43 61 129 70 154 15000 8411 1811 60
LZL15-BF613-B-165 164.5 2.1 2.9 21 981 723 1668 1230 43 61 129 70 154 15000 8411 1811 78
Unrestricted* 164.5 3.0 4.0 26 1071 790 1668 1230 43 86 181 70 154 15000
*) Unrestricted, the motors should not be run without load
A = Foot mount
B = Flange mount
82 AT L A S C O P C O A I R M OTO R S
Air motor LZL15 with helical gear units type BF:
100 200 300 400 500 600 700 r/min 50 100 150 200250 300 350 400 r/min 40 80 120 160 200 240 r/min
Torque
Nm
Power
kW Air cons.
Max
Power l/s Conversion factors
output
1 kW = 1.34 hp
Air. cons. 1 Nm = 0.74 Ibf - ft
1 l/s = 2.1 cfm
For information about performance curves, see page 7.
–––––
Torque Torque
at max
output
1 hp = 0.75 kW
1 Ibf-ft = 1.36 Nm
---------
1 cfm = 0.47 l/s Performance with restrictors
Speed r/min
Performance without restrictors, (unrestricted)
AT L A S C O P C O A I R M OTO R S 83
AIR MOTORS LZL25
with helical gear units
3.3 – 4.8 kW
4.4 – 6.4 hp
The LZL motor connects to the helical gear
through an IEC interface.
Model Ratio kW hp r/min Nm lb-ft Nm lb-ft r/min r/min l/s cfm kg lb N Ordering No.
LZL25-BF322-A-011 11.2 3.3 4.4 254 123 91 192 141 531 86 183 26 57 2700 8411 1811 86
LZL25-BF322-B-011 11.2 3.3 4.4 254 123 91 192 141 531 86 183 26 57 2700 8411 1811 94
Unrestricted* 11.2 4.8 6.4 370 128 94 192 141 531 140 297 26 57 2430
LZL25-BF322-A-018 18.2 3.3 4.4 156 201 148 311 230 327 86 183 26 57 3170 8411 1812 02
LZL25-BF322-B-018 18.2 3.3 4.4 156 201 148 311 230 327 86 183 26 57 3170 8411 1812 10
Unrestricted* 18.2 4.8 6.4 227 207 153 311 230 327 140 297 26 57 2860
LZL25-BF363-A-035 34.6 3.2 4.3 82 373 275 579 427 172 86 183 34 75 4100 8411 1812 28
LZL25-BF363-B-035 34.6 3.2 4.3 82 373 275 579 427 172 86 183 34 75 4100 8411 1812 36
Unrestricted* 34.6 4.7 6.2 120 386 285 579 427 172 140 297 34 75 3700
L25-BF613-A-059 58.6 3.2 4.3 48 632 466 981 724 101 86 183 77 170 13000 8411 1812 44
LZL25-BF613-B-059 58.6 3.2 4.3 48 632 466 981 724 101 86 183 77 170 13000 8411 1812 51
Unrestricted* 58.6 4.7 6.2 71 654 482 981 724 101 140 297 77 170 11700
LZL25-BF613-A-114 113.6 3.2 4.3 25 1226 904 1902 1403 52 86 183 77 170 16000 8411 1812 69
LZL25-BF613-B-114 113.6 3.2 4.3 25 1226 904 1902 1403 52 86 183 77 170 16000 8411 1812 77
Unrestricted* 113.6 4.7 6.2 36 1268 935 1902 1403 52 140 297 77 170 16000
LZL25-BF613-A-165 164.5 3.2 4.3 17 1775 1309 2754 2031 36 86 183 77 170 16000 8411 1812 85
LZL25-BF613-B-165 164.5 3.2 4.3 17 1775 1309 2754 2031 36 86 183 77 170 16000 8411 1812 94
Unrestricted* 164.5 4.7 6.2 25 1836 1354 2754 2031 36 140 297 77 170 16000
*) Unrestricted, the motors should not be run without load
A = Foot mount
B = Flange mount
84 AT L A S C O P C O A I R M OTO R S
Air motor LZL25 with helical gear units type BF:
1 50 50 1 100 50 1 150 50
100 200 300 400 500 600 r/min 50 100 150 200 250 300 350 r/min 40 80 120 160 200 r/min
Torque
Nm
Power
kW Air cons.
Max
Power l/s Conversion factors
output
1 kW = 1.34 hp
Air. cons. 1 Nm = 0.74 Ibf - ft
1 l/s = 2.1 cfm
For information about performance curves, see page 7.
Torque
–––––
Torque
at max
output
1 hp = 0.75 kW
1 Ibf-ft = 1.36 Nm
---------
1 cfm = 0.47 l/s Performance with restrictors
Speed r/min
Performance without restrictors, (unrestricted)
AT L A S C O P C O A I R M OTO R S 85
AIR MOTORS LZL35
with helical gear units
5.1 – 6.3 kW
6.8 – 8.4 hp
The LZL motor connects to the helical gear
through an IEC interface.
Model Ratio kW hp r/min Nm lb-ft Nm lb-ft r/min r/min l/s cfm kg lb N Ordering No.
LZL35-BF322-A-006 6.3 5.0 6.7 394 121 90 192 141 838 129 273 34 75 2360 8411 1813 01
LZL35-BF322-B-006 6.3 5.0 6.7 394 121 90 192 141 838 129 273 34 75 2360 8411 1813 19
Unrestricted* 6.3 6.2 8.3 464 128 94 192 141 838 159 337 34 75 2230
LZL35-BF322-A-011 11.2 5.0 6.7 221 216 159 340 251 471 129 273 34 75 2810 8411 1813 27
LZL35-BF322-B-011 11.2 5.0 6.7 221 216 159 340 251 471 129 273 34 75 2810 8411 1813 35
Unrestricted* 11.2 6.2 8.3 261 227 167 340 251 471 159 337 34 75 2650
LZL35-BF613-A-029 29.4 4.9 6.6 84 555 409 875 645 180 129 273 85 187 10600 8411 1813 43
LZL35-BF613-B-029 29.4 4.9 6.6 84 555 409 875 645 180 129 273 85 187 10600 8411 1813 50
Unrestricted* 29.4 6.1 8.1 99 583 430 875 645 180 159 337 85 187 10000
LZL35-BF613-A-048 47.6 4.9 6.6 52 899 663 1417 1045 111 129 273 85 187 12100 8411 1813 68
LZL35-BF613-B-048 47.6 4.9 6.6 52 899 663 1417 1045 111 129 273 85 187 12100 8411 1813 78
Unrestricted* 47.6 6.1 8.1 61 944 696 1417 1045 111 159 337 85 187 11400
*) Unrestricted, the motors should not be run without load
A = Foot mount
B = Flange mount
86 AT L A S C O P C O A I R M OTO R S
Air motor LZL35 with helical gear units type BF:
200 400 600 800 1000 r/min 100 200 300 400 500 r/min 40 80 120 160 200 r/min
kW Nm LZL35-BF613-A/B-048 l/s
7
6 1800 240
5 1500 200
4 1200 160
3 900 120
2 600 80
1 300 40
Torque
Nm
Power
kW Air cons.
Max
Power l/s Conversion factors
output
1 kW = 1.34 hp
Air. cons. 1 Nm = 0.74 Ibf - ft
1 l/s = 2.1 cfm
For information about performance curves, see page 7.
–––––
Torque Torque
at max
output
1 hp = 0.75 kW
1 Ibf-ft = 1.36 Nm
---------
1 cfm = 0.47 l/s Performance with restrictors
Speed r/min
Performance without restrictors, (unrestricted)
AT L A S C O P C O A I R M OTO R S 87
DIMENSIONS LZL WITH HELICAL GEAR UNITS
Foot models
Conversion factor 1 mm = 0.04 inch
M
P
G O ØS
H
B
F
R
ØQ
A
D
N
ØC
E
X
I K ØT
J U
L V
B
ØQ
A
LZL25-BF613-A-xxx 53.5 14 h9 50 h6 316 195 5.0 100 90 125 180 N/A 232 655.5 M16x36 BSP 1 103 Ø120 62 Ø200 Ø18 250 300 25
ØD D
R
N
LZL35-BF322-A-xxx 33 8 h9 30 h6 181 110 5.0 60 50 78 130 70 156 585.5 M10x22 BSP 1 1/4 119.5 Ø134 68 Ø250 Ø14 160 190 20
ØM
ØQ
ØE
A
ØC
E
N
LZL35-BF613-A-xxx 53.5 14 h9 50 h6 316 195 5.0 100 90 125 180 N/A 232 692.5 M16x36 BSP 1 1/4 119.5 Ø134 68 Ø250 Ø18 250 300 25
X
ØC
I K ØT
J U
L V
I
ØT
J
Flange models
Conversion factor 1 mm = 0.04 inch
G P
H O ØS
B F
R
ØM
ØQ
ØD
ØE
A
ØC
L
I
ØT
J
ATEX
In addition to the product instructions for air motors, the
following guidelines apply to explosion protected air motors.
Temperatures
• The maximum surrounding temperature for which the
certification is valid is 40°C (104°F).
• 40°C (104°F) is also the maximum allowed temperature of
the compressed air when it enters the motor.
• If the motor is installed in a equipment, the entire equip-
ment has to correspond to the guidelines 2014/35/EU.
• Make sure that the compressed air fulfill our quality
demands (quality classes 2.4.3. and 3.4.4 respectively
3.5.4 acc. to ISO/DIS 8573-1).
• Do not exceed maximum pressure of 6.3 bar, or as stated
on the motor nameplate. Exceeding the operating pressure
can increase the surface temperature due to higher rota-
ting speed and the motor can become an ignition source.
AT L A S C O P C O A I R M OTO R S 89
ATEX CODE DEFINITION
ATEX certificate:
For information about the ATEX certificate, refer to the ATEX Technical File, 9836 4610 00.
If the product is part of an assembly where the components have different ATEX codes, the component with
the lowest level of safety defines the ATEX code of the whole assembly.
90 AT L A S C O P C O A I R M OTO R S
SPECIAL MOTORS
Atlas Copco is a premier supplier of air motors, manufactured
to individual customer specifications.
AT L A S C O P C O A I R M OTO R S 91
NOTES
92 AT L A S C O P C O A I R M OTO R S
AT L A S C O P C O A I R M OTO R S 93
NOTES
94 AT L A S C O P C O A I R M OTO R S
9833 8998 01 2017:2
www.atlascopco.com