Sync Scan
Sync Scan
Sync Scan
Third-generation Phased Array flaw detector from SIUI, SyncScan incorporates the latest advancements in high-performance Phased Array,
TOFD,and high end thickness measurement functions into one compact unit.
Superior Features
● High IP rate: IP65
● Light Weight: 3.75 kg with battery
● Large touch screen: 8.4" LCD with resolution 800×600 pixels
● Upgradeable from conventional UT to phased array,TOFD, thickness measurement
with powerful & complete optional software functions.
Extendable connectors
UT/TOFD Probe
Encoder In/Out
USB(2 pcs)
Ethernet
SD Card Phased Array
VGA
Probe
DC Power
Battery Probe Locker
Reserved for Version Two:1/2/4-channel TOFD Probe
Conventional UT
Basic Functions:
Velocity+Zero Calibration/ Angle Calibration/ DAC/ AVG(DGS)/Full screen A scan/ Coordinates switch (sound path, depth, horizontal)/
Surface compensation(xx+xxdB)/ Auto freeze/ Second leg color/ Auto gain/ Wave compare/ Wave filling/ Peak Envelope/ Screenshot
Advanced Functions:
API/ TCG/ AWS/ CSC/ B Scan/ Flat Weld Groove(RayTracing)/ Crack Height Measurement/ Probe Spectrum Analysis/ Cineloop
B Scan Flat Weld Groove(RayTracing) Crack Height Measurement UT Flat Weld Groove
Thickness Measurement
Thickness Measurement
Advanced function to achieve CoatTHK, Echo to Echo, B-scan, V PATH, TDG, TEMP and MULTI-Layers Measurement.
Phased Array
Calibration Wizard
●To facilitate phased array operators, SyncScan carries calibration wizard with step-by-step guide to maximize inpection speed.
PA Groups Function
Y Splitter for
Dual-side Butt Weld Inspection Two Groups of A+B+C Scans
two phased array probes
One phased array probe can be designated up to six groups for different inspection, like sectorial or linear scan.
Multi groups of element and different angles can be applied for scanning at the same time, fully covering weld area and enhancing inspection
efficiency.
Two phased array probes can work simultaneously to inspect both sides of the weld, enhancing the inspection efficiency and speed.
Beam Coverage Simulation(Single Probe) Beam Coverage Simulation (PA Groups) Flat Weld Groove
This function is to simulate flat plate work pieces geometry, including the beam coverage simulation and imaging parameter settings.
With this function, it will be easy to analyze, locate flaw signals.
This solution is suitable for testing welds of small diameter pipes with outside diameters
ranging from 20.32-114.3mm (0.84-4.5 inch).
By offering features of V-groove and Y-groove weld making, beam coverage simulation,
as well as inserted wedge and link assembly guide table, the solution helps users to finish
testing of small diameter pipes quickly.
On-site Application Scan Type Setup Focal Law Setup Workpiece Setup
Foldable Mechanism
TOFD Probes
Phased Array
Probes
Simultaneous phased array and TOFD inspection can expand scanning coverage, decrease undetected rate.
Phased Array
Conforming to ASTM E2491 code, this solution achieves auto testing of phased array equipment for its element activity, so as to measure
activity of all elements and acoustic energy uniformity of the phased array probe.
Data Source
C Scan In-Amplitude, showing echo amplitude C Scan In-Depth, showing echo depth,
can be used for simple corrosion inspection.
Corrosion Solution
Easy to work out scan plan for pipeline corrosion inspection.
Step-by-step wizard can guide operators to finish setup
easily and improve inspection speed.
Different thickness will be displayed in different colors,
making it easier to determine corrosion situation for pipe.
Data analysis is available, for better understand the corrosion.
Linear Scan Image on Wheel Probe
Flat Panel Engraved with SIUI logo.
TOFD
TOFD Image Direction Workpiece Setup
Horizontal TOFD image Longitudinal TOFD image Input weld parameters to set up the workpiece.
TOFD Wizard
With step-by-step menu to guide operators to
finish TOFD scanning process easily and improve
inspection speed.
TOFD Measurement
After SAFT
PC Software
Main functions: Checking data file, Screen capture, Measuring data analysis. Generating test reports in word or excel format.
Several files from corrosion solution can be opened and combined. Abundant report samples are available. Ultrasonic Te
Test
T st Report Angle step
Company
C Scan
angle(Line
Channel a
ar)
Workpiece SN 2
length
Specs
WedgeMethodt Material
aterial Surfa
Surface
f ce
fa Probe Info Calibration
ion Focus
e heigh
WedgStandard
Coupling
u ling
up
Class
lass Date Probe mode
File Info delay dell
Vel Displ ay Pitch
width Pulse freq
File name File typ
type
y e
yp Probe length
Wedge Probe heighth
t
MachinePRFInfo Wedge htt Frequency
Setup Info Scan depth Gain
Machine Machine SN
Info Element
num
ge type
Echo Module Wedge Probe width
Pulse volta r typeversion
Software
Module
Modu
d le SN
du First eleme model
Pulse powe Scan Hardware version nt heigh
freq element
EndGroupNum Vel
ghtt
Receive / frame Scanning Infoture
num Aper or) Setup InfoWedge width Angle
Scan line rial vel Frame
angle num
(Sect Scan mode First eleme
F
Mate EndScan s step
time nt x
nt Focu Scan encode step Scan depth Wedge
W
Start eleme Scan encoder XMpp Pulse voltag length
step Scan encoder YMpp W e
Wedg
Linear height
(Sector) Encoder Name Pulse powe e
Start angle step Channel 1 Recei r
Di ay
Displ
Angle Scan line ve freq delay
angle (Linear) Calibration
num Pulse freq
P
Scan Probe Info Material / framee
PRF
Probe model Frequency Start elemevel
Images Pitch Element num Linea nt Gain
Echo type
Ec
Probe length Probe width Start angler step
t
th (Secto Scan type
Sca
Probe height Angle step r) End eleme
Wedge Info Scan angle nt
(Linear) Aperture
Ape
Wedge model Angle Images End an
aangle
gl (Sect
First element height First element x or)
Focus
Foc
Vel Wedge lengtht
th
Wedge width Wedge height
Setup Info
Scan depth Display delay
Pulse voltage Pulse fr
ffreq
eq
Pulse power PRF
Receive freq Gain
Scan line num / frame Echo type
typ
y e
yp
Material vel Scan ty
ttype
ype
yp
Start element End element
Linear step Aperture
Apertu
t re
tu
Start angle(Sector) End
d angle(Sector)
a gle(Sector)
an
Angle step Focus
Scan angle(Linear)
Channel 2
Calibration Measurem
Probe Info ent
ent Probe model Frequency
equency
Measurem Pitch Element
Remanum
ment
Probe length rk
Probee width
Probe height
Remark Wedge Info Operator
Wedge model Angle
gle
First element height First element
ment x
Signature
Operator
Date:
Date:
Signature
UT File Measurement Phased Array File Measurement TOFD File Measurement Report
On-site Application
SyncScan is designed to increase productivity in less demanding applications. It is suitable for inspection flaw position and size, which can be
widely used for various detection demands, such as PA weld inspection, TOFD weld inspection, corrosion mapping, composite inspection, gas
pressure welding on rail, pressure vessel inspection, stainless steel and PE pipe inspection...
Technical Specification
Shantou Institute of Ultrasonic Instruments Co., Ltd.
Add: #77, Jinsha Road, Shantou 515041, Guangdong, China
Tel: +86-754-88250150 Fax: +86-754-88251499
E-mail: siui@siui.com Website: http://www.siui.com