Valves

Ball Valve
Ball valve is a quarter turn operated valve. The closure member is a spherical plug with a through
hole. When the valve is in open state, the through hole is in-line with the fluid flow and hence, the fluid
passes through it. The valve is closed by rotating the globe by 90 Deg. such that the hole now
becomes perpendicular to the flow and hence, stops the flow.
The seat is usually circumferential, made up of soft materials to offer a tight shutoff. The seat can be
made either out of plastic or metals. Ball valves are not recommended to be used in a partially open
condition. Due to misalignment between the flow direction and opening of the plug, large pressure
drop takes place in partially open condition.
Due to above specified challenges, ball valves are mostly used in shutoff applications. Ball valves are
commonly used in steam, water, oil, gas, air, corrosive fluids. They can handle slurries and dusty dry
fluids. Ball valves are not used with abrasive and fibrous materials as it poses risk of damage to the
seat and plug surface.
Gate Valve
Gate valve is a sliding type of valve. In gate valves, the closing member is a metal gate. The gate
slides down to close the valve. In fully open conditions, the flow area is equal to the area of the pipe
and hence, there is negligible pressure drop across the valve.
Gate valve should ideally be used as on-off valve. It is not advisable to use them as throttling valves
because in partly open conditions, erosion of gate might take place. In partially open conditions, due
to vibrations, valve is exposed to quick wear and tear. Also, during closing and opening, there is
considerable amount of friction and hence, opening and closing these vales quickly and frequently is
not possible.
These valves find their use in petrochemical industry due to the fact that they can work with metal-
metal sealing.
Plug Valve
Similar to ball valves, plug valves are also quarter turn type of valves. This valve consists of a plug
which can be either cylindrical or conical in shape. The plug has a through slit which remains in-line
with the flow in the open condition. When the plug is turned by 90 Deg., this slit becomes
perpendicular to flow and the valve gets closed.
Plug valves are well suited to handle fluids with suspended solids, slurries etc.
Plug valves are primarily used for on-off applications. When used for throttling purpose, the pressure
drop through the valve is higher because of misalignment between flow direction and the direction of
the opening (slit).
Butterfly Valve
Butterfly valves are most simple yet versatile valves. They are quarter turn operated valves which are
commonly used in multiple industries for varied applications. Quarter turn operation ensures quick
operating of the valve. In the open condition there is minimum obstruction to the fluid flow through the
valve as the flow passes around the disc aerodynamically. This results in very less pressure drop
through the valve.
Due to its unique mode of operation, the valve can be actuated easily without requiring high torques
and wear and tear. Due to lack of friction, use of bulky actuators can be avoided. Another advantage
offered by butterfly valve is their compact size. The valve is quite compact, resembling a metal disc.
This makes their installation very easy. They can be used to handle slurries and fluids with suspended
solids as there are no cavities for deposition of solid particles inside the valve body.
Globe Valve
Globe valve is a linear motion type of valves and is typically used in both on-off and throttling
applications. In globe valves, the flow of the fluid through valve follows an S-path. Due to this, the flow
direction changes twice which results in higher pressure drops. Due to other advantages offered by
them, they are widely used in applications where pressure drop through the valve is not a controlling
factor.
These valves are generally not used beyond sizes larger than NPS 12 (DN 300) as enormous forces
are exerted on the stem to open or close the valve under fluid pressures. Globe valves require high
pressures on the seat to keep it closed when the fluid exerts pressure from the bottom of the disc.
They are used for both on-off and throttling applications but special types of trims are required for
throttling applications where large pressure drops are involved. These valves can be used in three
configurations, depending upon the applications-
a. Tee pattern
b. Angle Pattern
c. Wye Pattern
When the disc is removed from the stem and allowed to rest on its own weight, globe valves can be
used as non-return valves. Machining of seats is easier and cheaper compared to other types of
valves.
Pinch Valve
Pinch valves consist of a plastic tube/sleeve which is made up of reinforced elastomers. The sealing/
closing action is achieved by throttling or pinching this sleeve/tube. Pinch valves are best suited for
handling slurries and fluids having suspended solids. Pinch valves offer many benefits over the other
types of valves. They can be used for handling corrosive fluids as there is no contact between the
fluid carried and the actual valve mechanism. Once suitable sleeve material is selected, this valve can
work with a variety of fluids. As fluid being carried does not come in contact with the metal parts,
these valves can be used for food grade applications also.
Generally, pinch valves are suitable for low pressure applications. When used with abrasive slurries,
they should be used as on-off valves; if used for throttling purposes, the sleeve will get worn out.
Disc Check Valves
Disc check valves, also called as non-return valves allow the flow to pass through them in only one
direction and stop the flow in reverse direction. Because of this unique directional property, disc check
valves are essentially used for some critical applications in the steam systems.
There are four major types of disc check valves as follows-

1. Lift Check Valve- Lift check valves work simply on the principle of gravity. When the fluid comes in
the forward direction, the disc gets lifted from the seat against the gravitational force by the force of
incoming fluid. The valve thus allows fluid to pass in this direction. When the fluid comes in opposite
direction, it supports the force of gravity and the disc remains on the seat, keeping the valve closed.
Tight shutoff can be difficult to achieve in case back pressures are low. The valve will leak the fluid in
such situations.
2. Swing Check Valve- In this kind of check
valve, the disc or the closing element swings
around a point to which it is hinged. When the
fluid comes in the forward direction, the disc
swings in an open position allowing the fluid to
pass. When the fluid flow comes in the
opposite direction, the disc swings and rests
on the seat to lose it.
3. Spring loaded Check Valves- In this kind of check valves, tight shut-off it provided using a spring.
The spring holds back the disc on the seat. Even in the forward flow condition, the fluid should exert
some pressure, called cracking pressure in order to open the disc against the spring pressure.
4. Diaphragm Type Check Valve- This kind of check valves uses diaphragms arranged in such a
way that that open to allow the flow only in forward direction. When flow comes from the reverse
direction, the diaphragms remain closed.
Typical applications in a steam system-

1. After a float trap- Steam traps are passive device and work on the principle of the pressure
difference. During operation, process pressure might go under the backpressure after trap. In such
situations, because of the negative pressure across trap, condensate might go back into the process
equipment through the trap. Hence, it is always advisable to fix a disc check or non-return valve after
the float trap. This check valve will allow the condensate to flow from the trap outlet to the condensate
recovery system but will ensure that it does not flow in reverse direction.
2. Mixing applications- Applications where two or more fluid are mixed, check valves should be
installed at the end of each individual line. This avoids the contamination of one fluid by the other.
3. Disc check valves as vacuum breakers- Disc check valves, when fitted in a reverse way, can act
as vacuum breakers. While being used as vacuum breakers, they should be used as shown in the
figure below-
Under normal operating conditions, the valve will remain closed not allowing the steam to pass
through it. When the vacuum formation takes place (during shutoff) the disc will open and will allow
the air to come in thus avoiding the formation of vacuum.

Valves

Uploaded by

Copyright:

Available Formats

Valves

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Valves

Uploaded by

Copyright:

Available Formats

Ball Valve

There are four major types of disc check valves as follows-

Typical applications in a steam system-

You might also like