Dr. Fixit Pidifin 2K 177 1 PDF

WATERPROOFING PRODUCTS
Dr. Fixit Pidifin 2K

T w o p a c k c e m e n t i t i o u s w at e r p r o o f c o at i n g
Description
Dr. Fixit Pidifin 2K is a two component cementitious & acrylic flexible waterproofing & protective coating
composed of best quality portaland cement, properly selected & graded aggregates, additives & acrylic
emulsion polymer as a binder. It is applied to waterproof and protect concrete and similar structures. specially
formulated for swimming pools, retaining walls, pile Heads, water tanks, submerged tunnels, sumps, bridge
decks, marbles, granites and a wide variety of extreme service class structures because on curing it forms an

excellent elastomeric, waterproof & protective layer over the substrate.
Areas of Application
Dr. fixit Pidifin 2K can be applied to new or old concrete structures that are structurally sound and strong,
}} Basement retaining walls.
}} Pile Heads.
}} Structural surfaces of cellars.
}} Concrete roof slabs, floors, balcony floor slabs.
}} Water tanks and swimming pools.
}} Bridge decks.
}} Canals and dam walls.
}} Structural surfaces of dykes.
}} Waterproof coating (bottom coat) for marble, granite and other natural stones.
}} Suitable for steam room waterproofing.
}} Sewage treatment plants.
}} for special applications such as areas where more thick plaster application is needed.
Features & Benefits

}} Flexibility - Provides a flexible & low permeable coating.
}}Water permeability - Excellent resistance to ingress of water.
}}Slip resistant - Provides slip resistant coating.
}}Waterproof - Waterproof for concrete structures.
}}Adhesion - Excellent adhesion to concrete, natural and artificial stone.
}}Diffusion - Excellent resistance to chloride ion diffusion and carbon dioxide.
}}Low temperature resistant - Resistance to freeze-thaw cycles and de-icing salts.
}}Carbonation - Prevents carbonation of cement concrete.
Method of Application
1 S U R FACE P R E P R ATI O N
}}The surface must be strong & free from dirt, dust & loose particles. Thoroughly wire brush the surface &
clean the dust by air compressor or wash the surface with water.
}}Oil & grease must be removed using degreasing solvents.
}}Any damaged surface must be repaired by using polymer modified repair mortar.
2 M IXin g
}}Shake well the liquid component to a homogenous milky colour , before mixing transfer entire quantity of
liquid component into a suitable clean mixing vessel, gradually start addition of powder component under
constant mixing with a stirrer using a pneumatic or electric power tool (1kw) at slow speed at 250 – 300 rpm
for 3- 5 minutes to a homogeneous & uniform free flowing slurry.
3 A P P L I CATI O N
Blinding Coverage
}}Apply slurry coat of mixed material for two coats at a coverage rate of 1.5 kg/m2 over the set concrete slab by
a masonry brush or appropriate power spray equipment.
Concrete slabs or roof slabs

}}Two coat of mixed slurry to be applied to the set concrete @ 1.5 - 2kg/m2 by a masonry brush, roller or
appropriate power spray equipment.
Pile Heads
}}Two coats of mixed slurry to be applied on to the pile head @ 0.75kg/m2 first coat and 1.25 to 1.5 kg/m2.
}}second coat either by a masonry brush or by appropriate power spray equipment.
Water tanks and Swimming pools
}}Two coat of Dr. fixit pidifin 2k applied @ 1.5 kg/m2 each coat by a masonry brush or an appropriate power
spray equipment.
}}All applications where two coats is specified, the second coat shall be applied when the first coat
is completely dried.
}}The treated area should be protected from direct sunlight and to be damp cured by covering with
damp hessian or similar system.
Marbles/Stones
}}It is recommended to apply one coat at the bottom side of the marble @ 1.5 mm thick at a coverage of
approximately 1.8 to 2 kg/m2.
Precautions & Limitations

}}Mix the entire quantity of both the components at one go.
}}Do not use powder with the liquid other than the powder accompanied with liquid, it will affect the
Performance.
}} Do not add water for dilution.
}}Do not flood or over expose the treated surface to water until it is completely cured.
Technical Information
PROPERTIES SPECIFICATION RESULTS
Nature Two component

Appearance of mix Free flowing slurry

Colour Grey
Sp. gravity @ 25oc, g/cc 1.65 - 1.75
Toxicity BS 6920 : part 1:2000 Non-toxic
Abrasion resistance, cm/km 0.09
Rapid chloride permeability- reduction in ASTM C 1202: 1997 90
chloride ion penetration, %
Hydrostatic (positive) water pressure DIN 1048 7
resistance, bar
Hydraulic (negative) water pressure DIN 1048 3
resistance, bar
Ponding test, Hrs 48
Coverage
Approximately 1.5 -2 kg/m2 @ 1mm thickness for 2 coats.
}}
Packaging
3, 15 Kg’s
}}
Shelf Life & Storage

Shelf life is 12 months from the date of manufacturing.
}}
Store under cover, away from direct sunlight and protect from extreme temperature.
}}
In hot temperature conditions, it must be stored in a temperature-controlled environment i.e. less than 300c.
}}
Health & Safety Precautions

Dr. fixit Pidifin 2K is alkaline and should not come into contact with skin or eyes.
}}
Avoid inhalation of dust during mixing.

}}
Gloves, goggles and dust masks should be worn.

}}
Any contact to eyes should be washed immediately with clean water and seek medical advice
}}
Other Product Categories Available

DR. FIXIT has wide range of Waterproofing & Construction chemicals which includes,
£ Waterproofing Products £ Exterior Coating Products

£ Repair Products £ Tile Fixing Range
£ Sealants £ Concrete Admixtures

£ Flooring Products £ Grouts
Pidilite Industries Limited DISCLAIMER The product information & application details given by the
company & its agents has been provided in good faith & meant to serve
Construction Chemicals Division
only as a general guideline during usage. Users are advised to carry
Ramkrishna Mandir Road out tests & take trials to ensure on the suitability of products meeting
Post Box No. 17411 their requirement prior to full scale usage of our products. Since the
correct identification of the problems, quality of other materials used
Andheri (E) Mumbai 400059 INDIA
and the on-site workmanship are factors beyond our control, there are
Tel +91-22-2835 7000 • Fax +91-22-2835 7008 no expressed or implied guarantee / warranty as to the results obtained.
website www.doctor-fixit.com • E-mail drfixit@pidilite.com The company does not assume any liability or consequential damage for
Toll Free No.: 1800-22-5502 unsatisfactory results, arising from the use of our products.

Dr. Fixit Pidifin 2K 177 1 PDF

Uploaded by

Copyright:

Available Formats

Dr. Fixit Pidifin 2K 177 1 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dr. Fixit Pidifin 2K 177 1 PDF

Uploaded by

Copyright:

Available Formats

WATERPROOFING PRODUCTS

Dr. Fixit Pidifin 2K

Dr. Fixit Pidifin 2K

Features & Benefits

Dr. Fixit Pidifin 2K

Precautions & Limitations

PROPERTIES SPECIFICATION RESULTS

Nature Two component

Dr. Fixit Pidifin 2K

Shelf Life & Storage

Health & Safety Precautions

Avoid inhalation of dust during mixing.

Gloves, goggles and dust masks should be worn.

Other Product Categories Available

£ Waterproofing Products £ Exterior Coating Products

Dr. Fixit Pidifin 2K

You might also like