Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

OSI Model Layers

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 3

Santiago, Mcreeley Rare A.

Digital Communication
BSECE-4 November 22, 2018

1. Discuss the 7 layers of OSI, give examples.

OSI model layers

The main concept of OSI is that the process of communication between two endpoints in a
network can be divided into seven distinct groups of related functions, or layers. Each
communicating user or program is on a device that can provide those seven layers of
function.

In this architecture, each layer serves the layer above it and, in turn, is served by the layer
below it. So, in a given message between users, there will be a flow of data down through
the layers in the source computer, across the network, and then up through the layers in
the receiving computer.

Tech Target

The seven layers of function are provided by a


combination of applications, operating
systems, network card device drivers and
networking hardware that enable a system to
transmit a signal over a network Ethernet or
fiber optic cable or through Wi-Fi or
other wireless protocols.

The seven Open Systems Interconnection


layers are:

Layer 7: The application layer. This is the


layer at which communication partners are
identified -- Is there someone to talk to? --
network capacity is assessed -- Will the
network let me talk to them right now? -- and
where the data or application is presented in
a visual form the user can understand. This
layer is not the application itself, it is the set
of services an application should be able to
make use of directly, although some applications may perform application-layer functions.

Layer 6: The presentation layer. This layer is usually part of an operating system (OS) and
converts incoming and outgoing data from one presentation format to another -- for
example, from clear text to encrypted text at one end and back to clear text at the other.
Layer 5: The session layer. This layer sets up, coordinates and terminates conversations. Its
services include authentication and reconnection after an interruption. On the internet,
Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) provide these
services for most applications.

Layer 4: The transport layer. This layer manages packetization of data, then the delivery of
the packets, including checking for errors in the data once it arrives. On the internet, TCP
and UDP provide these services for most applications as well.

Layer 3: The network layer. This layer handles addressing and routing the data -- sending
it in the right direction to the right destination on outgoing transmissions and receiving
incoming transmissions at the packet level. IP is the network layer for the internet.

Layer 2: The data-link layer. This layer sets up links across the physical network, putting
packets into network frames. This layer has two sub-layers: the logical link control
layer and the media access control layer (MAC). MAC layer types include Ethernet and
802.11 wireless specifications.

Layer 1: The physical layer. This layer conveys the bit stream across the network either
electrically, mechanically or through radio waves. The physical layer covers a variety of
devices and mediums, among them cabling, connectors, receivers, transceivers and
repeaters.
References:

https://searchnetworking.techtarget.com/definition/OSI

You might also like