COMPANY PROFILE

Page | 1 

COMPANY: SALQAS NIGERIA LIMITED.

REGISTRATION: RC 800302.

OFFICE: SUITE A17, HUMUANI PLAZA, 87,

KUDIRAT ABIOLA WAY, OREGUN,
IKEJA, LAGOS.

TELEPHONE NO: +234-(0)806-319-7826.

+234-(0)802-353-4414.

E-MAIL ADDRESS: salqasng@yahoo.com

 
  
Introduction
SALQAS NIGERIA LIMITED (SNL) is an Engineering and Contracting company with main
focus on Electrical, Control and Automation. The company commenced full operation in
January 2009 and has been providing excellent engineering services to her growing list of
clientele. The activities of the company spans Oil & Gas, Power, as well as the Industrial Page | 2 
sector of the Nigerian economy. Based in Lagos, Nigeria, Salqas has the capabilities and
experience to execute multi-disciplinary projects. These include, but certainly not limited to,
engineering, procurement and assembly, Equipment testing, installation and erection,
commissioning as well as after sales services.

History
Salqas Nigeria Limited resulted from the coming together of a team of design and field
engineers who between them have vast and varied experience in various fields of
engineering. Prior to the incorporation of SNL, its promoters have been providing services as
Managers of small scale IPP projects from conception to commissioning; Power System
Engineers; Protection, Control & Metering (PC&M) Engineers; Testing and Commissioning
Engineers; Electronics Engineers and Programmers. This has seen them undertook projects
as Managers and Project Leads in virtually all the states of the federation.

Services
Underlisted are the activities in which SALQAS has expert capabilities:

1. Electrical Generation, Distribution and Safety Systems.

2. Assembling.
3. Testing & Inspection.
4. Commissioning.
5. After Sales Services.

ELECTRICAL GENERATION AND DISTRIBUTION

Salqas has the capability of supplying, installing, operating and maintaining various products
and services in the field of electrical generation and distribution. This ranges from diesel
generator sets up to switchgear and controlgear. With our experience in electrical
engineering and design, we can guarantee a state-of-the-art solution for almost every project

 
  
against competitive prices. Some of our offerings in this wise are as follows:

• Power generation up to 10MW - including the deployment of gas turbines and

containerised generator sets (diesel/gas).
• HV switchgear. Page | 3 
• LV switchgear & Motor Control Centres.
• LV sub-distribution switchboards.
• Control panels, generator control & protection panels including micro-processor based
ATS.
• Power system protection, control and industrial automation.
• Supply, installation and maintenance of inverters, UPS and industrial stabilizers.
• Power quality analysis.
• Design, installation, commissioning and maintenance of access control and monitoring
system, Fire Detection system (FDS), security and surveillance system.
• Power rental.
• General Electrical Installation.

ASSEMBLING

SNL has a very well utilised assembling/production work floor where Electrical Panels,
Control Panels and Consoles are fully assembled and wired. Our available production
capacity ensures the realisation of short production turn around. This is applicable for small
projects, as well as for large projects with, for instance, more than 40 panels. We are focused
on quality, to minimize the start-up period on location.

TEST & INSPECTION

As part of the Quality Management System within Salqas, there are a number of
predetermined test and control points within the assembling/production process. All projects
are monitored by the implementation of specific controls designed to meet the requirements
of each individual system in accordance with its test and inspection plan.

Factory Acceptance Test is a standard test that will be executed by Salqas, and this can be
witnessed by our client or his nominated representative. The technical requisition that is
issued by the client will be the basis for the test protocol that will be developed before the
start of the test. 

 
  
COMMISSIONING

As a Service organisation, SNL is specialised in commissioning and servicing of all common

Safety Systems, Electrical Systems and Modularised / Containerised Switchgear.
Experienced commissioning and service engineers are available to maintain and modify a
large variety of electrical and instrumentation systems and installations. The supervision of Page | 4 
installation work by contractors is part of the skills of our engineers. We are able to offer and
perform measurements, maintenance inspections and offer appropriate recommendations.

MANAGEMENT

SALAMI, Lateef Oyewole – MD/Chief Technical Officer

Salami Lateef is an Electrical Engineer with over 10 years experience in Power system
solutions, Industrial Control and Automation. He was amongst the top four in class at the
Standard Protection Code Course organized for experienced Power Holding Company of
Nigeria’s staff during his National Service year.

A 1999 graduate of the University of Ilorin, Salami cut his engineering teeth with Jiyoda
Engineering Nigeria Limited (JENL) under the tutelage of Engr. A.R.A Jimoh, a foremost
Nigerian consultant on energy with emphasis on power system engineering. In his 64
months’ sojourn at JENL, he was involved in the installation, testing and commissioning of
various power system equipment ranging from 120MVA transformer to Microprocessor
based protection relays in all of Nigeria’s 330kV Transmission Stations.

He was also involved in the provision of consultancy/advisory services to PHCN, NGC,

SPDC, CNL, EPNL amongst others with respect to IPP site selection, assessment of issues
relating to the evacuation of generated power, evaluation and selection of suitable gas
turbines, transmission line route selection, community electrification studies and power
distribution studies.

Salami thereafter took up appointment with one of Nigeria’s foremost indigenous integrated
energy service provider – The Negris Group – as a Senior Electrical Engineer in November
2006. He was deployed unto Negris’ Ikorodu IPP as Lead Engineer/Construction Manager
where he supervised the installation and testing of all aspect of the power plant – the Gas
Turbine and its ancillaries, the erection of a 7.5MVA 33kV switchyard, the 11kV switchgear,
the LV Motor Control Center, the 500kVA station service transformer, the 1MVA Black Start
Generator and all other station ancillaries.

February 2008 saw Salami’s redeployment by Negris to Chevron Nigeria Limited’s LEPSU
project as Lead Engineer/Construction Manager where he played a pivotal role in the
installation and deployment of the 10.8MW capacity private generation at CNL’s head office
complex at Lekki, Lagos, Nigeria. Lateef is a member of The Nigerian Society of Engineer.

 
  
BAMIDELE, Akinwole Olubukola – Director, Projects

Bamidele Akinwole Olubukola is a Mechanical Engineer with experience in Power plant and
facilities construction, operations and maintenance.

A graduate of Ahmadu Bello University, Bamidele has been involved in the detailed
Page | 5 
engineering through construction to commissioning of a number of IPP projects amongst
which are Ikorodu Industrial Power Project (2004 – 2006), Ilupeju Industrial Power Project
(2007), Unipower Agbara Limited (2007)and Lekki Electrical Power System Upgrade
(LEPSU) Project (2008).

Bamidele has also garnered experience in other big ticket engineering projects aside power
plants. Some of these are; Project Manager for the installation of Turbo Pumps at Ebocha Oil
Field for NAOC (2010), member of the team that performed the technical evaluation of the 2
x 30MW power plant at the Newsprint Manufacturing Company, Oku Iboku which was
acquired by The Negris Group (2010).

OLAJIDE, Sulaimon Ajibola – Director, Operations.

Olajide Ajibola is a very versatile and resourceful engineer with a versed experience in
microprocessor programming, power supply systems, industrial electronic and automation
engineering.

Olajide graduated from the Electrical & Electronics Engineering Department of The
Polytechnic, Ibadan in 1999. He started his career with Megascreen Limited as a technical
officer in 2001 from where he rose to become Technical Head by 2004 managing an 18-man
team. A feat that was largely due to his initiatives and resourcefulness by personally
undertaking the repairs of giant screens locally which were hitherto done oversea.

Olajide resigned from Megascreen Limited in 2004 to start Basic Electrical/Electronics Works
Limited a platform on which he has executed many innovative engineering solutions for a
large number of clients including PHCN, Nigerian Brewery, Nigerian Bottling Company,
Onward Paper Mills and The Negris Group amongst others.

Olajide joined Salqas Nigeria Limited (SNL) as a founding member in January 2009 and has
brought his experience to good contributing to the modest achievements recorded so far by
SNL.

 
  
Clients
In less than two years of operation, Salqas Nigeria Limited is greatly humbled to have been
of service to the underlisted clients:

1. Al’Amin-Isy Investment Limited. Page | 6 

2. UnoTelos Limited.
3. Okolison Brothers Nigeria Limited.
4. Logic Science Nigeria Limited.
5. Negris Limited.
6. Jasmic Global Services.
7. Sprint Power and Energy Limited.

Brief description of specific assignments carried out for these clients can be found in the
section on projects undertaken.

PROJECTS UNDERTAKEN

OKOLINSON BROTHERS LIMITED

Client: PHCN Enugu Distribution Zone

Scope of Supply:

• Testing & Commissioning of 2Nos. Hawker Siddeley Switchgear Horizon 36kV

Outdoor Circuit Breakers.
• Testing and Commissioning of 2 Nos. 33kV Line Control/Relay panel. (June 2010).

Contact: Mr. Raphael Okoli – 08033047855

NEGRIS LIMITED

Client: Chevron Nigeria Limited

Scope of Supply:

• Supply of 1 No. Compressed Air Dryer.

• Engineering design, Fabrication, Installation, Testing and Commissioning of control
circuit for 1 No. Compressed Air Dryer to respond to signal from each and any one of
4 Nos. Air Compressors. (April.2010)

Contact: Orire Ademayowa – 08055799854, 08035778074 (Negris).

Arugba-Ezo Simeon – 07080217804, 08033835655 (Chevron).

 
  
AL’AMIN-ISY INVESTMENT LIMITED

Client: Intercontinental Bank PLC (Oroyinyin, Lagos Island Branch Development).

Scope of Supply:

• Supply of 19 Nos. LG Split Air Conditioning Units. Page | 7 

• Installation, Testing and Commissioning of 19 Nos. LG Split Air Conditioning Units
(May - June.2010)

Contact: Alh. Razaq Musa - 08033197921

UNOTELOS LIMITED

Client: Chevron Nigeria Limited.

Scope of Supply:

• Design and fabrication of 200A, 4-Way load panel.

• Supply of Cables, Gear switches and Distribution Boards.
• Installation, Testing and Commissioning of Lekki IT & Data Center UPS distribution
system (Dec. 09 – Jan.2010)

Contact: Jude Egbokwu - 08023699396

OKOLINSON BROTHERS LIMITED

Client: Kano Export Processing Zone Dev. Authority.

Scope of Supply:

• Repair of 5Nos. ABB Unigear 550 MV Switchgear.

• Repair and Maintenance of 4Nos. SPAJ 40C relays (Jan 2010).

Contact: Alhaji Sule – 07086139477

LOGIC SCIENCE LIMITED

Client: Zain Nigeria Limited.

Scope of Supply:

• Engineering design, fabrication and testing of 6 nos. Air conditioner remote shutdown

 
  
panels as part of an overall fire protection system (Oct 09).

Contact: Akinola Daniel – 0808-647-2772

NEGRIS LIMITED Page | 8 

Client: Chevron Nigeria Limited.

Project: Lekki Electrical Power System Upgrade Project (LEPSU)

Scope of SALQAS Supply:

• Engineering design, fabrication and installation of MCC panel for the control of 6 nos.
Aerofoil air inlet systems (Mar- Aug 09).
• Modification of diesel fuel purifier to be remotely controlled and monitored.
• Installation of fuel level transmitter for the diesel fuel tank.
• Modifications for Scada/HMI and Master PLC with regards to additional fire and
smoke detectors and fire detection panel.
• Installation of 8 new smoke and heat detectors in the basement below the 11kV
switchgear and control room.
• Modification of HMI for first out alarm signal.

Contact: Simeon Arugba-Ezo – 0708-021-7804 – Chevron.

Adediji Victor – 0803-899-9565 – Negris.

JASMIC GLOBAL SERVICES

Client: Mayfair Garden, Lagos

Project: Rehabilitation of 33/11kV substation.

Scope of SALQAS Supply:

• Repair of 3Nos. Hawker Siddeley Switchgear (HSS) 11kV Eclipse Circuit Breakers.
• Calibration of 3Nos. Micom P121 and 2Nos. Micom P120 relays (Mar – May 09).
• Repair of station auxiliary supply battery charger.

Contact: Oluwatoba Popoola – 0803-744-2134 – Jasmic Global Services Ltd.

Nnanna Okorie-Agwu – 0803-334-8689 – Mayfair Garden.

 
  
JASMIC GLOBAL SERVICES

Client: Springview Estate, Lagos.

Project: Rehabilitation of abandoned 33/11kV substation.

Scope of Supply: Page | 9 

• Replacement of closing and tripping relays.

• Change out of control cables damaged by rodents.
• Repair of circuit breaker spring loading mechanisms.
• Change out of control switches.
• Re-engineering of station auxiliary supply.
• Supply of 12V 100AH deep cycle batteries.
• Supply, installation and commissioning of battery charger.
• Construction of cable route using standard cable trays.
• Supply and installation of PVC/SWA/PVC control cables.
• Calibration and coordination of protection relays.

Contact: Oluwatoba Popoola – 0803-744-2134 – Jasmic Global Services Ltd.

SPRINT POWER & ENERGY LIMITED

Client: Nestle Nigeria PLC.

Scope of Supply:

• Provision of emergency power for two weeks via a 1250kVA containerised Cummins
Generator. (June 09).

Contact: Aloyinlapa Adewale – 0807-316-2030

 
  
Project Pictures
Hawker Siddeley Switchgear (HSS) 12kV Eclipse Switchgear Circuit breakers repaired by
Salqas Nig Ltd. The Three units that were repaired are still in use at Mayfair Gardens.

Page | 10

11kV Eclipse Switchgear rehabilitated along with the calibration of its relays by Salqas Nig
Ltd

 
  
Left is the Air Inlet System Motor Control Center designed and fabricated by Salqas Nig Ltd.
It is in use at Chevron Nigeria Limited, Lekki Power House.

Page | 11

Lekki IT & Data Centre Equipment Emergency Power System Load Panel

 
  
Bonny LACT IT & Data Centre Equipment UPS Load Panel

Page | 12

LEKKI ELECTRICAL POWER SYSYEM UPGRADE PROJECT IN PICTURES

Construction of CAT 3516B Generator Plinths

     

Construction of generator hall cable trenches

      

 
  
Construction of new offices for Facility Management personnel and Power System Operators

Page | 13

     

Power House before and after installation of new generators

      

Extension of Power House height to accommodate Air Inlet System and Cyclones

 
  
Roofing of Power House

Page | 14

      

New Control Room

Generator Hall with new engines and 10T overhead crane

 
  
Installation of Local Control Panels (LCPs)

Page | 15

      

Remote Control Panels (RCPs) and Air Inlet System MCC

Installation of Low Voltage Switchgear

 
  
Installation of Medium Voltage Switchgear and uncrating of Air Inlet Fan

Page | 16

        

Installation of Generator Hall Air Inlet System (Generator Hall is soundproofed)

Installation of Compressed Air System for Air Starting of Generators

 
  
Diesel Fuel Purifier and compressed air receiver 

Page | 17

      

Compressed Air Dryer showing the motor, drying tower, filters, valves, inlet and the outlet

               

Repair of Hawker Siddeley Switchgear Horizon 36kV Outdoor Circuit Breaker at PHCN Umuahia

       

 
  
Intercontinental Bank PLC HVAC works in pictures.

Page | 18