ABB ZX1.2 SwitchgearDS 2448 ZX1.2 en

ZX1.
2
Gas-insulated medium
voltage switchgear
ZX1.2
High level cable termination compartment
8 Safety first
Partitioned single busbar system for transformer and distribution
1 systems with a raised cable termination point for ease of cable
15 assembly from the rear. The parameters extend up to 40 kV,
up to 31.5 kA and up to 2500 A for the switching devices and
2 busbars.
14 3
All the switching devices can be remote controlled, and as an
4 option mechanically interlocked. Both combined protection and
13 control units and pure protection devices are used. The plug-
12 5
in busbar technology without bolted joints permits simple and
11
therefore safe installation. Furthermore, the disconnector in the
10 busbar compartment permits fully unrestricted decoupling of
6 the outgoing feeder side. The level of operator safety, already
successfully confirmed by the IAC classification AFL(R) 31.5 kA
4
1s, can be even further enhanced by pressure relief channelled
outside the building.
7
Configuration opportunities
Together with incoming and outgoing feeder panels with
9 8 circuit-breakers for various rated currents and thus various
panel widths (400, 600 and 800 mm), panel variants for
sectionalizers, pure disconnector and metering panels round
off the range. Sectionalizer and coupler panels also offer
Feeder 2000 A
busbar voltage measurement as an integrated function.
1 Plug-in voltage transformer – feeder Accessibility

2 Isolating system for voltage transformer Operator control is effected either remotely or at the front of
3 Gas density sensor and filling valve the system. The power cables are accessible at the rear. The
4 Multifunctional protection and control unit switchgear is installed free-standing in the room.
5 Vacuum circuit-breaker
6 Three position disconnector SF6 insulation
7 Busbars All high voltage parts are effectively isolated from fluctuating
8 Pressure relief disk ambient influences in sealed enclosures filled with SF 6 insulat-
9 Pressure relief duct ing gas. Dust, humidity, harmful gases or vermin therefore
10 Inner cone cable connector have no effect. Temperature-compensated pressure sensors
11 Cable socket reliably and continuously monitor their own function and the
12 Measuring sockets for capacitive voltage indicator system quality of the gas insulation.
13 Test socket
14 Current transformer or combined current and voltage sensor
15 Plasma diverter
Technical data IEC Ratings Special Ratings

Rated voltage kV 12 24 36
Maximum operating voltage kV 12 24 36 40.5
Test voltages kV 28/75 50/125 70/170 85/185
Rated frequency Hz 50/60 50/60 50/60 50/60
Rated busbar current A ... 1250 … 2500 ... 1250 … 2500 ... 1250 … 2500 ... 1250 … 2500
Rated current of feeder A ... 630 ... 1250 … 2500 ... 630 ... 1250 … 2500 ... 1250 … 2500 ... 1250 … 2500
Rated peak withstand current kA ... 62.5 … 80 ... 62.5 … 80 … 80 … 80
Rated short-time current 3 s kA ... 25 … 31.5 ... 25 … 31.5 … 31.5 … 31.5
Internal Arc Classification 1) with plasma diverter IAC AFL 31.5 kA 1s ; with plasma absorber and duct IAC AFLR 31.5 kA 1s
1)
according to VDE 0671 part 200 Pressure relief in the switchroom or via duct to the outside
ZX1.2 components
Durable and reliable
High quality components

The permanently installed vacuum circuit-breakers are three- Earthing proper is then performed by the circuit-breaker. A
phase switching devices and fundamentally consist of the circuit-breaker in the function of an earthing switch is of higher
mechanical stored-energy spring mechanism and three poles quality than any other earthing switch. The combination of
with the vacuum interrupters. The three position disconnectors these high-quality switching devices with the sealed for life,
constitute combined disconnectors and earthing switches. SF6-filled enclosures guarantees maintenance-free switchgear.
The three switch positions – connecting, disconnecting and Irrespective of this, the enclosures with O-ring seals on all
earthing – are clearly defined by the mechanical structure of components and covers and the filler valves provide an oppor-
the switch, reliably excluding simultaneous connecting and tunity for repairs. No minor damage necessitates replacement
earthing positions. For earthing, the three position disconnec- of a panel.
tor – under no current – prepares the connection to earth.
Always the right connection Current transformers

In the cable termination compartment with its extremely high Generously dimensioned block-type current transformers
termination point (1250 mm), the power cables are connected with several cores supply the signals required for protec-
with inner cone cable connectors. Up to four parallel cables tion and measurement.
can be installed. A surge arrester can be fitted as an alterna-
tive to one cable. A non-return valve on the SF6-filled stainless Voltage transformers
steel enclosure facilitates systematic extraction of the insulat- Shockproof voltage transformers are plugged into inner
ing gas at the end of a panel’s service life. cone sockets. These are isolatable for test purposes,
especially for cable testing.
Cable termination compartment Plug-in busbar connection Plugged-in voltage transformers

with inner cone connectors
Contact
Note: We reserve the right to make technical changes or modify
© Copyright ABB DEABB 2448 en (12.2016 - ABB)

This product contains Sulphur hexafluoride (SF6). the contents of this document without prior notice. With regard
to purchase orders, the agreed particulars shall prevail. ABB AG
SF 6 is a fluorinated greenhouse gas with a GWP of 22800.
does not accept any responsibility whatsoever for potential errors
The maximum quantity per panel of panels is 12 kg, devided into or possible lack of information in this document.
maximally two compartments. That corresponds to a CO 2 equivalent
of 274 t. We reserve all rights in this document and in the subject matter and
illustrations contained therein. Any reproduction, disclosure to third
Each gas compartment has a gas leakage monitor, and therefore
parties or utilization of its contents – in whole or in parts – is forbidden
regular leakage testing (to Fluorinated Gas Regulation 517/2014) is not without prior written consent of ABB AG.
required.
Copyright© 2010 ABB
All rights reserved
Your sales contact: www.abb.com/contacts

More product information: www.abb.com/productguide

ABB ZX1.2 SwitchgearDS 2448 ZX1.2 en

Uploaded by

Copyright:

Available Formats

ABB ZX1.2 SwitchgearDS 2448 ZX1.2 en

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ABB ZX1.2 SwitchgearDS 2448 ZX1.2 en

Uploaded by

Copyright:

Available Formats

ZX1.

1 Plug-in voltage transformer – feeder Accessibility

Technical data IEC Ratings Special Ratings

High quality components

Always the right connection Current transformers

Cable termination compartment Plug-in busbar connection Plugged-in voltage transformers

Note: We reserve the right to make technical changes or modify

© Copyright ABB DEABB 2448 en (12.2016 - ABB)

Your sales contact: www.abb.com/contacts

You might also like