2012 PVC Catalog GF PDF
2012 PVC Catalog GF PDF
2012 PVC Catalog GF PDF
Important Note
The technical data given in this catalogue is for
preliminary information purposes only and is
published without guarantee. All pictures and
drawings are for illustrative purposes only and
should not be regarded as wholly accurate in every
detail. We reserve the right to withdraw or to alter
the specification of any product without notice.
Please consult our Terms and Conditions of sale.
www.georgefischer.co.uk
PVC-U Lifetime Warranty
GF PVC-U
What do we offer?
The warranty applies to all PVC-U products with the GF trademark according to metric
norm and the British Standard purchased after January 1, 2007. Defective products are
immediately replaced by new products of equal value.
i
Lifetime Warranty for PVC-U Products
What this warranty covers
This Lifetime Warranty is provided to the original user of PVC-U Products (Valves, Fittings
and Pipes) marked with the trademark +GF+ sold by Georg Fischer Piping Systems Ltd or its
affiliated companies (“George Fischer”) as of January 1, 2007.
Georg Fischer warrants that the PVC-U Products, under normal conditions will be free from
defects in material and workmanship during their whole useful life.
This Lifetime Warranty applies exclusively to PVC-U Products in accordance with DIN/ISO
Standard 15494 and BS EN 1452.
1. PVC-U Products that have been subject to abuse, misuse, neglect, accident,
improper installation, improper storage, improper handling or adjustment, or
corrosion.
2. Acts of God, including, but not limited to flood, fire hurricane, tornado,
earthquake, electro-static or any other similar natural cause beyond the control
of Georg Fischer.
ii
5. Freight charges, installation cost, labor cost, damage to related components, cost
incurred due to down time, other incidental or consequential damages of any kind,
and normal wear and tear of the product.
Georg Fischer shall have two (2) weeks following receipt of any PVC-U Product returned
for warranty claim to begin the investigation of the claimed defects, and the original user
or authorised distributor shall give Georg Fischer (or its agents) reasonable access to the
application, if possible.
Each of the above mentioned terms must be met in order to quality for the Lifetime
Warranty coverage.
Exclusive remedy
Georg Fischer’s Lifetime Warranty and remedies set forth herein are the original user’s
sole and exclusive remedies in relation to Georg Fischer, and are offered by Georg
Fischer in lieu of all other warranties, guarantees, and/or remedies whatsoever,
including, but not limited to, implied warranties of merchantability and/or fitness for a
particular purpose, or other warranties or guarantees arising by operation of law, which
are hereby, to the extend permitted by applicable law, expressly disclaimed.
In no event shall Georg Fischer be liable to the original user or authorised distributor or
third parties for lost profits, consequential, incidental, punitive, exemplary or other similar
damages.
This Lifetime Warranty gives the original user certain specific legal rights, and the
original user may also have other rights that vary from country, in particular warranty
rights under the purchase contract concluded with his dealer. Some laws do not allow the
limitation/exclusion of incidental or consequential damages, particularly for injury to or
death of persons, or otherwise restrict the limitations contained herein, so some of the
exclusion above may not apply to you.
iii
xiv
50 years of application knowledge
GF PVC-U
Water, drinking water & chemical conveyance
Fields of Application:
Water treatment
Chemical industry
Drinking water
Swimming pools
Marine industry
Food and beverage production
Product Range
Pipes
Fittings
Manual valves
Actuated valves
Pressure safety valves
Jointing systems
Flow, pH, conductivity, turbidity, chlorine, level, pressure,
and temperature measurement
EN/ISO - 6 - d400mm
Application range:
Resistant to acids and alkalis. Suitable for drinking water,
food stuffs and beverages, de-mineralised and de-ionised water,
paints, sea water, waste and general purpose water.
0°C to 60°C
Jointing system:
Tangit (or Dytex for aggressive chemicals) gap filling solvent
weld system.
v
Worldwide Approval
GF PVC-U is manufactured and tested to the highest quality. Our own
compound and strict quality controls for each raw material delivery
form the basis for our high quality products.
Our own independently accredited test laboratory for components of
plastic piping systems according to EN ISO 45001 assures the highest
quality.
Quality and environmental management systems according to ISO
9001 and 14001 are the basis for the continuous improvement of our
performance.
Third party approvals for GF PVC-U offer peace of mind to customers
using the products.
vi
Distribution, Warehousing and Technical Support
The excellent location of the Distribution Centre in Coventry offers
the latest in state of the art distribution and warehousing systems.
An enhanced delivery system and 24 hour warehousing programme
guarantees prompt delivery to GF customers nationwide.
Our Technical support staff are qualified to offer you advice and guide
you through the wealth of products GF can supply. We make sure you
feel confident that the product matches your requirements and leaving
you fully assured that GF is your preferred supplier.
Automation
GF manufacture a complete range of actuators and actuated valves
which includes pneumatic as well as electric actuators. Thanks to
their modular design, the actuators can be configured specifically to
your application (eg. positioner, additional limit switches, fail-safe unit,
AS-Interface connection, etc.) Housing material is robust and resistant
PPGF. All actuators are sized specific to GF valves, resulting in an
increased service life. Connections to third party valves are no problem
due to EN ISO 5211 interface.
SIGNET
The GF Signet range of flow control and measurement equipment is
at the cutting edge of technology in this field.
Flow, pH, level, conductivity, temperature,
turbidity, chlorine, pressure and
ORP are all catered for
within the range.
vii
5
viii
ix
Design of metric and inch
piping systems
PVC-U
x
Application area of pipes ASTM SCH80 – Inch Sizes
Dimensionally matched for use with all inch size
and fittings fittings, SCH80 PVC-U pipe manufactured in
accordance with ASTM requirements is available
in sizes ½” – 16” and has a minimum burst
BS Inch, metric, and SCH80 industrial piping pressure rating that changes according to the
systems pipe nominal bore size. The pressure ratings for
Georg Fischer offers an unrivalled range of each pipe size are available for reference next
PVC-U systems in both metric and inch sizes. to each pipe product code. However the advised
The pressure and temperature ratings for pipe, working pressure ratings for ASTM SCH80 pipe
fittings and valves of each system are valid for and fittings are as follows:
a lifetime of 25 years at their maximum rated ½” – 6” 15 bar
pressure at 20°C water. 8” – 16” 9 bar
For those unfamiliar with the difference between Fittings 10” and above in this catalogue are all
metric / inch sizes the following note may be manufactured to ASTM requirements.
helpful.
In imperial systems, the sizes of pipe, fittings and Metric Sizes
other components such as valves are designated PVC-U pipes and fittings in accordance with EN
throughout by reference to the nominal size of 1452 / EN 15493 / DIN 8062 are available from
the bore of the pipe expressed in inches and 6 – 400mm and use the nominal pressure (PN)
fractions of an inch. In metric systems, however, method of pressure rating, unless otherwise
sizes are designated by reference to the outside indicated the maximum working pressure ratings
diameter of the pipe expressed in millimetres. are as follows:
Some valves are only available in metric sizes,
for which a range of millimetre / inch adaptor Pipes:
fittings is available to install these metric valves PN4 75 – 315mm 4 bar
into inch systems. PN6 50 – 400mm 6 bar
PN10 25 – 315mm 10 bar
It should be understood that metric sizes are not PN16 6 – 160mm 16 bar*
simply inch sizes which have been converted
into millimetres and called metric; their actual Fittings:
dimensions are slightly different, and they PN16 6 – 160mm 16 bar
are, with the exception of 2 ½” (75mm) and 5” PN10 200 - 315mm 10 bar
(140mm) not interchangeable without inch / PN6 315 - 400mm 6 bar
metric adaptors. Threaded ¼” – 2” 10 bar
BS Inch system *GF metric PVC-U pipe with wall thickness
PVC-U pipes according to BS EN 1452 and greater than specified in EN 15493 for industrial
fittings according to BS 4346 are available from applications
3/8” – 8” and use the class system of pressure
rating, unless otherwise indicated the maximum
pressure ratings are as follows:
Pipes:
Class C 2” – 8” 9 bar
Class D 11/4” – 4” 12 bar
Class E 3
/8” – 5” 15 bar
Class T 3/8” – 2” 12 bar
Fittings:
Class E 3/8” – 6” 15 bar
Class C 8” 9 bar
Threaded 1/4” – 2” 9 bar
xi
General Fundamentals
Thermoplastics are subject to greater thermal The low modulus of elasticity of thermoplastics
expansion and contraction than metals. Pipes allows changes in length to be taken up by
installed above ground, against walls or in special pipe sections, where pipe supports are
ducts, especially those exposed to temperature positioned so that they can take advantage of
variations, require changes in length to be the natural flexibility of the material. The length
taken up in order to prevent extra strain on of such sections is determined by the diameter
the pipes. Length changes can be taken up by: of the pipeline and the extent of the thermal
a) flexible sections expansion to be compensated.
b) compensators Flexible sections arise naturally at any
Flexible sections are the most common branching or change in direction of the
solution, being the simplest and the most pipeline. The movement LB of the flexible
economical. The calculations for and the section as a result of a change ΔL in the
positioning of flexible sections are therefore length must not be restrained by fixed pipe
described in detail. brackets, protrusions wall, girders or the like.
xii
The installation temperature must therefore be
incorporated into the calculations as well as
the maximum and minimum operating
temperatures. It is preferable to use "+"
to indicate expansion of the pipe and "-"
to indicate contraction. The larger change in
length is the one to be used for determining
the required length of the flexible section.
Calculation of change in length
The change in length caused by temperature
can be calculated using the following formula:
with:
• ΔL = temperature-related change in length (mm)
• L = length of the pipe section (m)
• ΔT = difference of temperature (K)
• α = coefficient of linear expansion (mm / m K)
xiii
xiv
Determining the length of the flexible section for PVC-U
The values needed to determine the necessary length
are:
• The maximum change in temperature from the
0-position (ie. from the position in which the pipe
was installed). But remember that the pipe
could just as well contract as expand,
• The pipe diameter d
• The length of the pipe section L
xv
xvi
xvii
Recommendations for installation
Length changes in pipe sections should
always be accommodated through the arrange-
ment of fixed brackets. The following
examples show how the changes can be
distributed in pipe sections by suitable
positioning of fixed brackets.
Pre-stress
Length changes in pipe sections should always be
accommodated through the arrangement of fixed
brackets.
xviii
Installing Valves
Valves should be secured as directly as possible,
so that the actuation forces are transmitted
directly and not via the pipeline. Valve brackets
or valves from GF with an integrated fastening
device are used to securely fasten plastic valves.
Installing compensators These valve brackets are also used to bear the
The low modulus of elasticity means that the loads of the valve and filling weight of the pipeline.
reaction force of plastic pipes to thermal changes Any changes in length which arise can be
is low compared to metal pipes. This makes normal prevented with the appropriate fixed points
compensators designed for use with metal pipes before or after the valve. You will find more
unsuitable because of their high inherent resi- information under the respective valve types.
stance. Only freely moving compensators may be
used in plastic pipe systems, i.e. those with a low Installing pipework under plaster or
resistance. The following compensators may be embedding it in concrete
considered: rubber compensators, PTFE corrugated
compensators or suitably selected metal multi-disc Installing Valves
compensators. Installing pipework under plaster or embedding
it in concrete
Carefully placed fixed points should be used when
fitting compensators for the regulation of the pipe in Padded pipework
order to ensure their unhindered operation. Where pipework is installed under plaster or
The installation temperature provides the basis for embedded into concrete, the flexible sections
the calculations to ensure this. at bends and branches must be padded for the
calculated distance H, as also must any branches
and elbows included in the affected
section. Use only flexible materials as padding,
such as glass wool, mineral wool, foam or
similar.
xix
Unpadded pipework
Unpadded pipes can also be plastered or
concreted in directly. Since the axial stress
arising from internal pressure is half as great as
the circumferential stress, pipelines can support
limited additional axial stress without becoming
overloaded. In such cases the level of stress
expected must be calculated. The same is true
of any section of pipe between two fixed points
where no allowance has been made for changes
in length. The load at the fixed points must be
calculated and considered when planning the
fixed points. The distance between pipe brackets
in such cases may have to be reduced from the
normal values in order to prevent bowing
in the pipeline.
xx
Pipe support for plastics pipes
Plastic pipe systems should be installed using
supports designed for use with plastics and
should then be installed taking care not to
damage or over stress the pipe.
xxi
Starting from the dimension d90 the KLIP-
IT brackets must be installed standing, like
shown in the assembly examples. The sup-
port distances given in the following, speci-
fied for the KLIP-IT tubing clamps, apply only
to this mounting method.
Information:
Pipe brackets must be robust and mounted firmly to be
able to take up the forces arising from changes in length
in the pipeline. Hanging brackets or KLIP-IT pipe brackets
are unsuitable for use as fixed points.
xxii
xxiii
Using the tables for pipe bracket spacing
Plastic pipelines need to be supported at
certain intervals depending on several
factors: the material, the average pipe wall
temperature, the density of the medium
transported and the size and wall thickness of
the pipe. Determining the spacing between pipe
brackets is based on the permissible deflection of
the pipe between consecutive brackets.
Information:
The values given in the tables apply only to
pipelines which are freely movable in the axial
direction.
xxiv
Cutting the pipe to length
xxv
Solvent cementing equipment
xxvi
Cleaning the pipe and socket
xxvii
Applying the cement
xxviii
xxix
Due to the effects of these acids on the pipe
material, we recommend using pipes with a
General
pressure rating PN16. For the expected lifetime
Dytex solvent cement combined with Dytex
and strength, please contact your GF
solvent /cleaner is a special cementing
representative. Attention! Usually the allowable
system for PVC-U / PVC-C piping systems
pressure must be decreased by one pressure
which are exposed to the effects of highly
rating (thus PN16 to PN10). When using Dytex
aggressive chemicals, such as concentrated,
in PVC-C piping construction with the below
inorganic acids. For all media not mentioned
mentioned acids, the pressure and temperature
below or media in lower concentrations,
requirements for PVC-U must be adhered to.
Tangit solvent cement should be used.
Please refer to the information on the below
Because Dytex is not gap-filling, a special
mentioned acids in our list of chemical
cement jointing procedure is required and is
resistance.
described in the following. Dytex solvent
cement jointing calls for adequate technical
know-how, which can be acquired in the
appropriate training courses.
Your GF representative will gladly provide you
with information about training possibilities.
The dimensions of GF pipes, fittings and
valves conform generally to the various national
standards as well as to ISO 727-1 concerning
dimensions of sockets. Our fittings and valves
can be used with any PVC-U or PVC-C pipes
whose outside diameter tolerance conforms
to ISO 11922-1. According to ISO 727-1 the
following minimal cement lengths apply:
xxx
Important:
Well-chamfered pipe ends prevent the layer
of cement from being removed as the pipe is in-
serted into the fitting.
xxxi
Cementing The waiting time between the individual work steps
Thorough cleaning is done with the Dytex sol- (=next cement joint) depends on the size of the
vent (do not use Tangit cleaner!). Soak a white, gap.
absorbent, lint-free paper with Dytex solvent and
thoroughly clean the dry surfaces which are to be
cemented. Use a new sheet of absorbent paper
for each cleaning. Then brush Dytex solvent onto
the surfaces to be cemented (pipe ends on
the outside, fitting on the inside) until the surface
clearly begins to dissolve (becomes sticky).
Apply Dytex cement to the dissolved surfaces
with a brush in the axial direction and let dry for at The cementing should be done at temperatures
least 30 seconds. Repeat this process as indica- between 5 °C and 40 °C. If there are deviations,
ted in the following table. please observe the following safety measures:
Cement gap (diameter difference) of more than
0.4 mm are not permitted! Pipes / fittings from the At temperatures near the freezing point, any
dimension 110 must be measured to determine condensation or thaw must be removed, e.g. with
the permissible gap. warm air. The cement and the solvent should be
kept beforehand at room temperature. The finished
joint must be kept at approx. 25 °C for another
15-30 minutes.
xxxii
Since Dytex cement and solvent are etching, pipes We recommend using protective gloves to avoid
or fittings may not be placed on spilled cement contact with the cement and the solvent. In case
or cement residue left on the paper or come into of contact with eyes, rinse thoroughly with water.
contact with them in any way. Do not close off Seek medical advice!
cemented pipelines during the drying process.
This is particularly important at temperatures below Replace clothing contaminated with the cement
+ 5 °C, when there is otherwise a danger of immediately.
damaging the material.
Observe the respective accident prevention
Drying period and pressure testing guidelines.
After a drying period of approx. 48 hours at room
temperature, the final strength of the joint is
achieved. At lower ambient temperatures, the
bonding takes longer. The pipeline may only be
filled and the pressure test may only be done at the
earliest 48 hours after the last cementing.
Safety precautions
Dytex cement and Dytex solvent contain highly
volatile solvents. Make sure there is adequate
ventilation or exhaust fans in closed rooms. Solvent
vapours are heavier than air. The off-take must
therefore be on the floor or under the workbench
for example. The paper used to clean the parts and
to remove the cement must be deposited in closed
containers to reduce the amount of
solvent vapours in the air.
xxxiii
Occasionally there is the need to install measuring-
devices, venting devices or similar into an existing
piping system without using additional installation
fittings.
Solution:
At the section of the piping system with greatest
wall thickness (in the middle of the joint) a hole is
drilled for the spigot of the adapter fitting. Then a
suitable adapter fitting is solvent cemented into the
hole which acts as socket.
xxxiv
xxxv
xxxvi
Filling the pipeline
Before starting with the internal pressure test,
the following points must be checked:
Was installation done according to the available
plans?
xxxvii
514-519
General
To make things easier, the permissible test
pressures can be taken directly from the
following diagrams.
Definitions:
P = permissible test pressure in bar
T = pipe wall temperature in °C
General
• Internal pressure at the absolute low
point of the pipeline
• Medium and ambient temperature
Checks during testing • Water volume input
The following measurement values must be • Water volume output
recorded consistently during testing: • Pressure drop rates
xxxviii
PVC-U Inch Product Range
(for further details please contact your local Georg Fischer Supplier)
All the below pressure rating are with water at 20°C
Pipe
Class E 15 bar 3/8"–5"
Class D 12 bar 11/4"–4"
Class C 9 bar 2"–8"
Class T 12 bar 3/8"–2"
SCH80 15 bar 1/2"–6"
SCH80 9 bar 8"–16"
Fittings
Long Bends 15 bar 1/2"–6"
xxxix
PVC-U Inch Product Range
(for further details please contact your local Georg Fischer Supplier)
All the below pressure rating are with water at 20°C
Fittings
Adaptor Bush 15 bar 3/8"–4"
(Socket x male thread)
Full Thread Fittings 10 bar 3/8"–2"
(Thread x Thread)
Adaptor Unions 15 bar 1/2"–3"
(Brass, ABS, Stainless Steel Malleable Iron)
Accessories Various
(Loose flanges, Sets, Pipe Brackets etc.
Hand-operated and actuated valves
Ball Valve, Type 546 15 bar 3/8"–4" (EPDM, FPM)
3 way Ball Valve, Type 543 10 bar 3/8"–2" (EPDM,
FPM)
2 way Ball Valve, Type 375 15 bar 3/8"–2" (EPDM, FPM)
10 bar 21/2"–4"
2 way Ball Valve, Color Type 35X 15 bar 1/2"–2" (EPDM)
Metering & laboratory Valves Type 323 10 bar 1/8"–1/2"
& 322 (EPDM, FPM)
Diaphragm Valve, Type 515, 514, 517, 317 15 bar 3/8"–2"
(EPDM, PTFE, FPM, NBR, FPM) 10 bar 3/8"–4"
6 bar 6"
Butterfly Valve, Type 567, 568, 037, 038 10 bar 2"–12"
(EPDM, FPM) 8 bar 14"–16"
Ball Check Valve Type 360/561 15 bar 3/8"–2"
(EPDM, FPM)
Electrically Actuated Ball Valves, 15 bar 3/8"–4"
Type 130 and Type 107 (EPDM, FPM)
Pneumatic Actuated Ball Valves, 15 bar 3/8"–4"
Type 230 (EPDM, FPM)
Pneumatic Actuated Diaphragm Valves, 15 bar 3/8"–2"
Diastar (EPDM, FPM) 10 bar 2"–4"
6 bar 6"
Electrically Actuated Butterfly Valves, 10 bar 2"–12"
(EPDM, FPM) 8 bar 14"–16"
Pneumatic Actuated Butterfly Valves, 10 bar 2"–12"
(EPDM, FPM) 8 bar 14"–16"
xl
PVC-U Metric Product Range
(for further details please contact your local Georg Fischer Supplier)
All the below pressure rating are with water at 20°C
Pipe
PN4 4 bar d75-315
PN6 6 bar d50-400
PN10 10 bar d25-315
PN16 16 bar d6-160
Clear PN4 4 bar d63-d280
Clear PN6 6 bar d12-63
Clear PN10 10 bar d25-d110
Clear PN16 16 bar d50-160
Fittings
Long Bends 16 bar d20-160
Short Pattern Bend 10 bar d225-280
6 bar d315-400
Elbows 90° 16 bar d6-160
10 bar d200-250
Tee 90° 16 bar d6-160
10 bar d200-280
6 bar d315-400
Tee 90° Reduced 16 bar d25-160
10 bar d200-315
6 bar d400
Tee 45° 10 bar d10-63
6 bar d75-250
Elbow 45° 16 bar d16-160
10 bar d200-280
6 bar d315-400
Cross 16 bar d10-63
10 bar d75-110
Socket 16 bar d6-160
10 bar d200-280
6 bar d315-400
Cap 16 bar d12-110
10 bar d140-280
6 bar d315
Flange Adaptors 16 bar d16-160
(Serrated, flat) 10 bar d200-280
6 bar d315-400
Union 16 bar d16-63
(EPDM and FPM) 10 bar d75-110
Short Reducing Bushes 16 bar d12-160
10 bar d200-280
6 bar d315-400
Long Reducing Bushes 16 bar d8-140
xli
PVC-U Metric Product Range
(for further details please contact your local Georg Fischer Supplier)
All the below pressure rating are with water at 20°C
Adaptor Sockets 16 bar d12-63
(Female Thread x Socket) 10 bar d75-110
Adaptor Sockets 16 bar d12-63
(Female Thread x Nipple) with reinforcement
Adaptor Bush 16 bar d12-63
(Socket x male thread) 10 bar d75-110
Full Threaded Fittings 10 bar 3/8"–2"
(thread x thread)
Adaptor Unions 16 bar d20-90
(Brass, ABS, Stainless Steel, Malleable Iron)
Accessories Various
(Loose Flanges, Sets, Pipe Brackets etc.)
xlii
PVC-U Metric Product Range
(for further details please contact your local Georg Fischer Supplier)
All the below pressure rating are with water at 20°C
Pneumatic Actuated Diaphragm Valves, 16 bar d16-63
Diastar (EPDM, FPM) 10 bar d63-110
6 bar d160
Electrically Actuated Butterfly Valves, 10 bar d63-315
Diastar (EPDM, FPM) 8 bar d355-400
Pneumatic Actuated Butterfly Valves 10 bar d63-315
(EPDM, FPM) 8 bar d355-400
xliii
Abbreviations
xliv
50 Years of application knowledge
GF CONTAIN-IT Plus PVC-U Double Containment System
Double containment is a safe and cost
effective solution for the controlled
conveyance of aggressive media.
Fields of Application:
• Water treatment
• Chemical industry
• Power generation industry
• Food and beverage production
Product Range:
• Pipes
• Fittings
• Manual valves
• Actuated valves
PVC-U BS Inch 3
PVC-U metric 29
Accessories 203
CONTAIN-IT 231
Index 253
1
2
PVC-U BS Inch
Page
Pipes 4
Adaptor Fittings 13
Flanges 19
Unions 22
Adaptor unions 23
Tank adaptors 26
Saddles 27
3
Pipes
Pipe PVC-U grey class E 15 bar at 20°C
• Material: PVC-U, Polyvinylchloride unplasticised
• Dimensions: BS EN 1452 Part 1 &2 (formerly BS 3505)
• Pipe length: 6m with plain ends
• Minimum order quantity: 1 length
Size (NB) PN Code kg/m e di d
4
Pipe PVC-U grey class 7 (T) 12 bar at 20°C
• Thick wall pipe to allow for threading
• Material: PVC-U, Polyvinylchloride unplasticised
• Dimensions: BS EN 1452 Part 1 &2 (formerly BS 3505)
• Pipe length: 6m with plain ends
• Minimum order quantity: 1 length
Size (NB) PN Code kg/m e di d
5
Fittings for solvent cement jointing
21 00 11 Bend 90° PVC-U Inch BS
d PN Code kg z D L
7
21 20 11 Tee 90° reducing Inch
d-d PN Code kg z z1 D L L1
8
21 30 11 Cross PVC-U Inch BS
d PN Code kg z D L
[inch] [mm]
3∕8 16 721 901 905 0.002 29
[inch] [mm]
2 16 721 901 911 0.098 72
10
21 91 13 Reducing bush long pattern PVC-U Inch BS
d d1 PN Code kg z L
1 1∕2 15 829130 54 2
1 3∕4 15 829131 57 3
1 1∕4 1 15 829168 65 2
1 1∕2 1∕2 15 829209FB 85 4 BUSH
2 1 15 829249 79 8
2 1 1∕4 15 829250 76 3
2 1 1∕2 15 829251 77 3
3 1 1∕2 15 829337FB 116 29 BUSH
3 2 15 829338 92 4
11
21 96 11 Cap PVC-U Inch
d PN Code kg D L
12
Adaptor Fittings
21 10 12 Elbow 90° PVC-U Inch BS Rp
Model:
• With solvent cement socket BS Inch and parallel female thread Rp
• Reinforcing ring stainless (A2)
• Connection to plastic or metal threads
• Do not use thread sealing pastes that are harmful to PVC-U
• Install with low mechanical stress and avoid large cyclic temperature changes
d Rp PN Code kg z1 z2 D L
3∕4 15
3∕4 721 901 407 0.019 23 34 41
1 1 15 721 901 408 0.036 27 42 48
1 1∕4 1 1∕4 15 721 901 409 0.065 33 52 56
1 1∕2 1 1∕2 15 721 901 410 0.092 38 62 61
2 2 15 721 901 411 0.160 47 77 74
13
21 91 14 Reducing Bush, PVC-U
BS Inch
Model:
• With solvent cement socket BS Inch and parallel female thread Rp
• Reinforcing ring stainless (A2)
• Connection to plastic or metal threads
• Do not use thread sealing pastes that are harmful to PVC-U
• Install with low mechanical stress and avoid large cyclic temperature changes
d Rp PN Code kg D L z
836007
3∕4 0.030 52 25
1 836010 0.040 61 31
1 1∕4 836012 0.060 65 33
1 1∕2 836015 0.080 69 34
2 836020 0.120 73 34
3 836030 0.310 100 51
4 836040 0.510 112 53
14
21 91 17 Adaptor Bush reducing, PVC-U
BS Inch - R
Model:
• With solvent cement socket BS Inch and taper male thread R
• Do not use thread sealing pastes that are harmful to PVC-U
• Install with low mechanical stress and avoid large cyclic temperature changes
d R PN Code kg z L s
15
21 91 39 Adaptor Nipple, PVC-U
BS Inch - R
Model:
• With solvent cement spigot BS Inch and taper male thread R
• Do not use thread sealing pastes that are harmful to PVC-U
• Install with low mechanical stress and avoid large cyclic temperature changes
d R PN Code kg L
835007
3∕4 0.050 24 14 50
1 835010 0.080 28 17 57
1 1∕4 835012 0.110 29 18 62
1 1∕2 835015 0.140 30 18 66
2 835020 0.200 31 19 70
3 835030 0.470 49 30 97
4 835040 0.720 51 33 109
16
21 91 31 Adaptor Socket, PVC-U
metric - BS Inch
Model:
• With solvent cement sockets metric and BS inch
d d PN Code kg z D L
21 96 07 Hose connector PVC-U R
Model:
• With taper male thread R
• With parallel hose connector
• Do not use thread sealing pastes that are harmful to PVC-U
R PN Code kg D L s
17
21 96 17 Hose connector PVC-U R reduced
Model:
• With taper male thread R
• With parallel hose connector
• Connection to plastic threads only
• Do not use thread sealing pastes that are harmful to PVC-U
R Code kg d L s
18
Flanges
21 79 11 Flange adaptor PVC-U
Combined jointing face flat and serrated Inch BS
Model:
• Counterpart:
Flange Adaptor serrated BS Inch No. 21 79 11
Flange Adaptor serrated metric No. 21 79 01
• Gasket: Flat gasket EPDM No. 48 40 03
d DN PN Code kg z D D1 L L1
19
21 73 01 Full face flange PVC-U Inch BS
21 73 11 Drilled to BS EN 1092 PN10/16
Model:
• Jointing face serrated
• Solvent cement socket BS inch
• It is recommended to use backing flanges in conjunction with all Full Face
Flanges
• For pressure ratings over 2 bar backing flanges must be used
• All Full Face Flanges are manufactured with outside diameter to BS EN 1092
20
21 73 00 Full face flange PVC-U Inch BS
Undrilled
Model:
• Jointing face serrated
• Solvent cement socket BS inch
• It is recommended to use backing flanges in conjunction with all Full Face
Flanges
• For pressure ratings over 2 bar backing flanges must be used
• All Full Face Flanges are manufactured with outside diameter to BS EN 1092
d DN PN Code kg z D h b l
21
Unions
21 51 11 Union for solvent cement jointing PVC-U Inch BS
Model:
• Union End: Solvent cement socket BS Inch
• Union Bush: Solvent cement socket BS Inch
• Gasket: O-Ring EPDM No. 48 41 00, FPM No. 49 41 00
d PN EPDM FPM kg
1∕2 3 9 43 21 26 1
3∕4 3 9 51 24 29 1 1/4
1 3 9 58 27 33 1 1/2
1 1∕4 3 10 72 32 39 2
1 1∕2 3 10 83 33 46 2 1/4
2 3 10 100 40 58 2 3/4
2 1∕2 3 18 135 47 62 Tr108x5
22
Adaptor unions
21 51 12 Adaptor union PVC-U Inch BS Rp
Model:
• Union End: Solvent cement socket BS Inch
• Union Bush: Parallel female thread Rp
• Gasket: O-Ring No. 48 41 00
• Connection to plastic threads only
• Do not use thread sealing pastes that are harmful to PVC-U
d Rp PN Code kg z1 z2 D L1 L2 G
[inch] [inch]
1∕2 721 531 306
1∕2 0.120
3∕4 51 51 22 29 7 10 1 1/4 31
1 58 58 26 33 9 10 1 1/2 38
1 1∕4 72 69 31 39 12 12 2 48
1 1∕2 83 78 33 46 14 14 2 1/4 54
2 100 91 35 58 11 18 2 3/4 67
127 101 39 62 12 18 Tr 108x5 85
3 150 114 45 69 15 19 Tr 128x5 96
23
21 53 18 Adaptor union PVC-U/malleable iron galvanised Inch BS R
Model:
• Union nut: PVC-U
• Union Bush: Solvent cement socket BS Inch
• Union End: Malleable iron with taper male thread R
• Gasket: O-Ring EPDM No. 48 41 00
d R Code kg D L L1 L2 z G s
[inch] [inch] [mm] [mm] [mm] [mm] [mm] [mm] [inch] [mm]
1∕2 1∕2 43 48 22 26 7 9 1 25
2 2 100 88 40 48 14 12 2 3/4 65
2 127 109 1∕2 47 62 16 18 Tr 108x5 85
3 3 150 121 52 69 18 19 Tr 128x5 95
24
Adaptor union PVC-U/brass Inch BS R
Model:
• Union nut: PVC-U
• Union Bush: Solvent cement socket BS inch
• Union End: Brass with taper male thread R
• Gasket: O-ring EPDM No. 48 41 00
d R PN* Code kg
25
Tank adaptors
61 10 87 Tank Adaptor, PVC-U
BS Inch
Model:
• With solvent cement socket BS Inch and parallel female thread G
• Gasket: flat gasket EPDM
• Can be supplied with FPM O-Ring No. 49 41 00
d PN Code kg h l1 l2 a G
[inch] Code
1∕2 161 050 226 0.122
[inch] [mm] [mm] [mm] [mm] max [mm] [inch] [mm] of bore in
[mm] tank side
[mm]
1∕2 56 89 67 11 30 16 1” 46 35
3∕4 65 97 72 12 32 19 11/4” 50 43
1 70 103 75 12 33 22 11/2” 60 49
1 1∕4 95 111 78 12 32 26 2” 80 61
1 1∕2 95 119 82 13 32 31 21/4” 80 67
2 115 131 87 13 33 38 23/4” 95 83
26
Saddles
21 117 Saddle single branch (rubber gasket joint to main)
Model:
• Outlet with solvent cement socket, BS Inch
• Top saddle with NBR rubber gasket
d1-d PN Code kg L
Code [mm]
27
28
PVC-U metric
Page
Pipes 32
Pressure Pipes 37
Adaptor fittings 50
Threaded fittings 57
Flange adaptors 61
Adaptor unions 67
Union Ends 73
Union bushes 79
Union nuts 80
Seals 81
Tank adaptors 82
29
Page
Spare Parts Ball Valve Type 546 105
Strainers 180
30
Page
Inspection glass 185
31
Pipes
61 01 71 Pipe PVC-U grey
Series S6.3 SDR13.6 nominal pressure PN16
Model:
• Material: PVC-U, Polyvinylchloride unplasticised DIN 8061
• Colour: RAL 7011 - dark-grey
• Dimension: DIN EN ISO 15493, DIN 8062
• Pipe length: 5m, with plain ends
• Minimum order quantity: 1 length
d Size (NB) PN Code e di Weight
[mm] [mm]
110 324 110 000 0.950 1.8
[mm] [mm]
* 200 324 200 001 2.390 2.5
36
Pressure Pipes
Pipes PVC-U, red
L-HP
Model:
• Material: PVC-U
• Dimension: DIN 8061 / 8062
• food grade*
• Colour: red (similar RAL 2002)
• Pipe length: 5m, with plain ends
Note:
* Approved for food contact
Approval on request
d Code kg/m e
[mm] [mm]
16 325 016 000 0.123 1.8
[mm] [mm]
110 325 110 000 1.640 3.2
DEKADUR-Pressure Pipes PVC-U
SDR 51, nominal pressure PN 4
Model:
• Material: PVC-U
• Dimension: acc. DIN 8062
• Colour: RAL 3020 red (troisdorfred)
• Pipe length: 5m, with plain ends
d Code kg/m e
[mm] [mm]
160 325 160 000 2.410 3.2
37
Pipes PVC-U, red
SDR 21, nominal pressure PN 10
Model:
• Material: PVC-U
• Dimension: acc. DIN 8062
• Colour: RAL 3020 red (troisdorfred)
• Pipe length: 5m, with plain ends
d Code kg/m e
[mm] [mm]
32 325 032 000 0.276 1.9
[mm] [mm]
12 325 012 000 0.055 1.0
38
Pipes PVC-U, red
SDR 9, High Performance Nominal Pressure PN16
Model:
• Material: PVC-U
• Dimension: acc. DIN 8062
• Colour: RAL 3020 red (troisdorfred)
• Pipe length: 5m, with plain ends
d Code kg/m e
[mm] [mm]
10 325 010 000 0.053 1.2
39
Fittings for solvent cement jointing
21 00 01 Bend 90° PVC-U metric
d d PN Code kg z D L
41
21 15 03 PRO-FIT Elbows 45°, PVC-U
metric
Model:
• Outlet: A = Solvent cemented socket metric
• Outlet: B = Solvent cemented spigot in combination with reducing socket met-
ric
• Direct connection from fitting to fitting allowing shortest possible overall length
d d1 PN Code kg z z1 z2 D L L1
42
21 20 03 PRO-FIT Tees 90° equal, PVC-U
metric
Model:
• Outlet: A = Solvent cemented socket metric
• Outlet: B = Solvent cemented spigot in combination with reducing socket met-
ric
• Direct connection from fitting to fitting allowing shortest possible overall length
d d1 PN Code kg z z1 z2 D L L1 L2
225 160 10 - 721 200 157 9.707 120 119 257 239 205
250 160 10 - 721 200 159 14.520 132 151 282 263 237
250 200 10 - 721 200 162 12.213 132 131 282 263 237
280 160 10 - 721 200 165 18.402 120 180 318 266 266
280 225 10 - 721 200 167 16.145 120 148 318 266 268
315 160 6 - 721 200 169 22.189 120 197 356 284 283
315 225 6 - 721 200 172 20.154 120 165 356 284 284
400 225 6 - 721 200 176 40.000 163 258 442 369 377
400 315 6 - 721 200 180 35.000 163 213 442 369 377
21 25 01 Tee 45° PVC-U metric
d d PN Code kg z z1 D L L1
44
21 30 01 Cross PVC-U metric
d d PN Code kg z D L
45
52 91 01 Socket equal PVC-U transparent metric
d PN Code kg z D L
46
21 90 03 Reducing bush short PVC-U metric
Model:
• With solvent cement spigot and socket metric
d d1 PN Code kg z L
49
Adaptor fittings
21 10 02 Elbow 90° PVC-U metric Rp
Model:
• With solvent cement socket metric and parallel female thread Rp
• Reinforcing ring stainless (A2)
• Connection to plastic or metal threads
• Do not use thread sealing pastes that are harmful to PVC-U
• Install with low mechanical stress and avoid large cyclic temperature changes
50
21 91 02 Adaptor socket PVC-U metric Rp
Model:
• With solvent cement socket metric and parallel female thread Rp
• Reinforcing ring stainless (A2)
• Connection to plastic or metal threads
• Do not use thread sealing pastes that are harmful to PVC-U
• Install with low mechanical stress and avoid large cyclic temperature changes
d Rp PN Code kg z L s
52
21 91 07 Adaptor bush equal PVC-U metric R
Model:
• With solvent cement socket metric and taper male thread R
• Do not use thread sealing pastes that are harmful to PVC-U
• Install with low mechanical stress and avoid large cyclic temperature changes
d R PN d Code kg z L s
53
Adaptor Fitting PVC-U/stainless steel Rp
Model:
• Adaptor fitting PVC-U
• Adaptor fitting equally suitable as socket and spigot
• Stainless steel WN 1.4404 (3162) with parallel female thread Rp
• Gasket: O-ring EPDM No. 48 41 01
d D PN Rp Code kg z1 z2 D1 L S
54
20 91 07 Adaptor Sockets, Brass/PVC-U
metric - R
Model:
• Brass with taper male thread R and PVC-U solvent cement socket insert, met-
ric
• Install with low mechanical stress and avoid large cyclic temperature changes
d R PN Code kg z L s
55
60 1002 Wall mounting bracket brass/PVC-U
Metric/Rp
Model:
• Brass, with parallel female thread Rp and PVC-U solvent socket insert metric
56
Threaded fittings
21 10 16 Elbow 90° PVC-U Rp
Model:
• With parallel female thread Rp
• Connection to plastic threads only
• Do not use thread sealing pastes that are harmful to PVC-U
• Install with low mechanical stress and avoid large cyclic temperature changes
3∕4 10
1∕2 721 910 837 0.021 25 39 32
1 1∕2 10 721 910 842 0.028 31 45 32
1 3∕4 10 721 910 841 0.031 29 45 36
1 1∕4 1 10 721 910 846 0.050 32 50 46
1 1∕2 1 1∕4 10 721 910 852 0.065 35 55 55
2 1 1∕2 10 721 910 858 0.127 45 65 65
21 91 19 Threaded nipple R PVC-U
Model:
• With taper male thread R
• Do not use thread sealing pastes that are harmful to PVC-U
• Install with low mechanical stress and avoid large cyclic temperature changes
R PN Type Code kg L s
58
21 91 19 Threaded nipple R PVC-U
Model:
• With taper male thread R
• Do not use thread sealing pastes that are harmful to PVC-U
• Install with low mechanical stress and avoid large cyclic temperature changes
R PN Code kg L
[inch] [mm]
3∕8 10 721 911 505 0.010 43
60
Flange adaptors
21 79 01 / 21 80 01 Flange adaptor PVC-U
Combined jointing face flat and serrated metric
Model:
• Solvent cement socket metric
• d63 - d400: Combined Jointing face flat and serrated
• Gasket: Profile flange gasket EPDM No. 48 44 07,
FPM No. 49 44 07 or
Flat gasket EPDM No. 48 40 03
Only use O-ring EPDM No. 48 41 01,
FPM No. 49 41 01 in combination with
counterpart Flange Adaptor No. 21 81 01
• Flange: PVC-U No. 21 70 00, PP with steel ring
No. 27 70 02,
Backing Flange PP-V for socket systems
metric No. 27 70 04
d d DN PN Code kg z D D1 L L1
61
21 81 01 Flange adaptor PVC-U
Jointing face with O-ring groove metric
Model:
• Solvent cement socket metric
• Counterpart: Flange Adaptor flat No. 21 80 01
d DN d PN Code kg z D D1 L L1
[mm] [mm] [mm] max. min. [mm] [mm] [mm] [mm] [mm]
[mm] [mm]
20 95 65 27 14 12 19 3 4 M12
25 105 75 33 14 13 22 3 4 M12
32 115 85 41 14 14 25 3 4 M12
40 140 100 51 18 17 29 3 4 M16
50 150 110 62 18 17 34 3 4 M16
63
Unions for solvent cement jointing
21 51 01 Union for solvent cement jointing PVC-U metric
Model:
• Union End: solvent socket metric
• Union Bush: Solvent socket metric
• Jointing face: With O-ring groove
• Gasket: O-Ring EPDM No. 48 41 00, FPM No. 49 41 00
d d PN EPDM FPM kg
12 3 10 31 15 22 5/8
16 3 10 35 17 24 3/4
20 3 10 43 19 26 1
25 3 10 51 22 29 1 1/4
32 3 10 58 25 33 1 1/2
40 3 12 72 29 39 2
50 3 14 83 34 46 2 1/4
63 3 18 100 41 58 2 3/4
75 3 18 135 47 62 Tr108x5
90 5 18 158 56 69 Tr128x5
110 5 11 188 66 72 Tr154x6
64
21 51 03 PRO-FIT Unions for solvent cement jointing, PVC-U
metric
Model:
• Union End: Solvent cemented spigot in combination with reducing socket met-
ric
• Union Bush: Solvent socket metric
• Gasket: O-Ring EPDM No. 48 41 00, FPM No. 49 41 00
d d1 PN EPDM FPM kg
* 20 24 10 26 43 40 26 1
* 25 25 10 28 51 44 29 1 1∕4
* 32 27 10 30 58 49 33 1 1∕2
40 31 12 35 74 57 39 2
50 35 14 40 83 66 46 2 1∕4
63 39 18 46 100 77 58 2 3∕4
21 51 00 Union with union end blank PVC-U metric
d PN EPDM FPM kg z2 D L1 L2 G/Tr
65
21 51 06 Thread union PVC-U Rp Rp
Model:
• Union End: Parallel female thread Rp
• Union Bush: Parallel female thread Rp
• Union nut: PVC-U
• Gasket: O-Ring EPDM No. 48 41 00
• Can be supplied with FPM O-Ring No. 49 41 00
• Connection to plastic threads only
• Do not use thread sealing pastes that are harmful to PVC-U
Rp PN Code kg z1 z2 D L1 L2 G
66
Adaptor unions
21 51 31 Unions for solvent cement jointing, PVC-U
metric - BS
Model:
• Union End: Solvent cement socket metric
• Union Bush: Solvent cement socket BS inch
• Gasket: O-ring EPDM No. 48 41 00
• Can be supplied with FPM O-Ring No. 49 41 00
d d1 PN Code kg z1 z2 D L1 L2 G
[mm] [mm] [inch] Code [mm] [mm] [mm] [mm] [mm] [mm] [inch]
68
21 54 02 Adaptor union PVC-U/stainless steel metric Rp
Model:
• Union End: Stainless Steel 1.4404 (316L), parallel female thread Rp
• Union Bush: Solvent cement socket PVC-U metric
• Union nut: PVC-U
• Gasket: O-Ring EPDM No. 48 41 00, FPM No. 49 41 00
d Rp PN EPDM FPM kg
20 11 10 43 50 24 26 1 24
25 11 10 51 55 26 29 1 1∕4 29
32 12 10 58 61 29 33 1 1∕2 36
40 14 12 72 71 33 39 2 45
50 15 14 83 79 34 46 2 1∕4 54
63 15 18 100 95 39 58 2 3∕4 63
21 54 07 Adaptor union PVC-U/stainless steel metric R
Model:
• Union End: Stainless Steel 1.4404 (316L), taper male thread R
• Union Bush: Solvent cement socket PVC-U metric
• Union nut: PVC-U
• Gasket: O-Ring EPDM No. 48 41 00, FPM No. 49 41 00
d R PN EPDM FPM kg
20 44 43 60 34 26 1 24
25 46 51 65 36 29 1 1∕4 32
32 50 58 72 40 33 1 1∕2 37
40 58 72 84 46 39 2 48
50 62 83 93 48 46 2 1∕4 54
63 73 100 111 55 58 2 3∕4 69
69
21 54 55 Adaptor union PVC-U/stainless steel metric
Welding end
Model:
• Union End: Stainless Steel 1.4404 (316L) with welding end
• Union Bush: Solvent cement socket PVC-U metric
• Union Nut: Stainless Steel WN 1.4404 (316L)
• Gasket: O-Ring EPDM No. 48 41 00, FPM No. 49 41 00
d d1 PN EPDM FPM kg
20 32 48 22 26 2.0 1 41
25 33 52 23 29 2.0 1 1∕4 46
32 36 58 26 33 2.0 1 1∕2 55
40 38 64 26 39 2.0 2 68
50 42 73 28 46 2.0 2 1∕4 74
63 50 88 32 58 2.6 2 3∕4 88
21 53 03 Adaptor union PVC-U/malleable iron galvanised metric Rp
Model:
• Union nut: PVC-U
• Union Bush: Solvent cement socket PVC-U metric
• Union End: malleable iron with parallel female thread Rp
• Gasket: O-Ring EPDM No. 48 41 00
d Rp Code kg
[mm] [inch]
20 1∕2 721 530 306 0.073
25 51 51 22 29 7 10 1 1/4 31
32 58 58 26 33 9 10 1 1/2 38
40 72 69 31 39 12 12 2 48
50 83 78 33 46 14 14 2 1/4 54
63 100 91 35 58 11 18 2 3/4 67
75 127 101 39 62 12 18 Tr 108x5 85
90 150 114 45 69 15 19 Tr 128x5 96
70
21 53 08 Adaptor union PVC-U/malleable iron galvanised metric R
Model:
• Union nut: PVC-U
• Union Bush: Solvent cement socket PVC-U metric
• Union End: Malleable iron with taper male thread R
• Gasket: O-Ring EPDM No. 48 41 00
d R Code kg D L L1 L2 z G s
[mm] [inch] [mm] [mm] [mm] [mm] [mm] [mm] [inch] [mm]
20 1∕2 43 48 22 26 7 10 1 25
25 3∕4 51 54 25 29 9 10 1 1/4 30
32 1 58 60 27 33 8 11 1 1/2 36
40 1 1∕4 72 70 31 39 10 13 2 46
50 1 1∕2 83 81 35 46 13 15 2 1/4 55
63 2 100 98 40 58 14 20 2 3/4 65
75 2 1∕2 127 109 47 62 16 18 Tr 108x5 85
90 3 150 121 52 69 18 18 Tr 128x5 95
71
21 55 09 Adaptor union PVC-U/brass metric R
Model:
• Union nut: PVC-U
• Union Bush: Solvent cement socket PVC-U metric
• Union End: Brass with taper male thread R
• Gasket: O-Ring EPDM No. 48 41 00
d R PN* Code kg
25 1∕2 51 66 37 29 47 1 1/4 30
25 3∕4 51 71 42 29 52 1 1/4 30
25 1 51 75 46 29 56 1 1/4 30
32 1∕2 58 70 37 33 48 1 1/2 36
32 3∕4 58 75 42 33 53 1 1/2 36
32 1 58 79 46 33 57 1 1/2 36
40 1 1∕4 72 91 52 39 65 2 46
50 1 1∕2 83 102 56 46 71 2 1/4 55
63 2 100 125 67 58 87 2 3/4 65
75 2 1∕2 127 139 77 62 95 Tr 108x5 85
90 3 150 155 86 69 104 Tr 125x8 95
21 55 03 Tap connectors PVC-U/brass metric G
Model:
• Union End: PVC-U, solvent cement socket / spigot metric
• Union Nut: brass with female thread G
• Gasket: flat gasket EPDM No. 48 40 02
d d1 G PN Code kg z L s
72
Union Ends
21 60 01 Union end PVC-U metric
Model:
• Solvent cement socket metric
• Suitable for unions, tank connectors and diaphragm valves Type 514
73
21 60 20 Union end PVC-U ASTM
Model:
• With solvent cement socket ASTM
d PN Code kg z D D1 L
74
21 60 06 Union end PVC-U Rp
Model:
• Parallel female thread Rp
Rp PN Code kg z D D1 L
75
34 60 01 Union end PE80
Model:
• With fusion socket metric
• Suitable for unions, tank connectors and diaphragm valves Type 514
d PN Code kg d1 d2 L L1 z
Union end long PE100
Model:
• For butt-, IR Plus® and electrofusion
• Suitable for unions, tank connectors and diaphragm valves Type 514
d PN FM Code kg D L L1 e
76
24 60 07 Union end stainless steel R
Model:
• Material: Stainless Steel 1.4404 (316L)
• Taper male thread R
R PN Code kg D D1 L s
77
20 60 02 Union end brass R
Model:
• Union End: Brass with taper male thread R
d R Code kg D D1 L z s
78
Union bushes
21 64 01 Union bush PVC-U metric
d PN Code kg z D L G/Tr
79
Union nuts
21 69 00 Union nut PVC-U
* for Adaptor unions PVC-U / malleable iron only
d PN Code kg L G Tr d
80
Seals
EPDM 48 41 00 O-Ring gasket
FPM 49 41 00
Model:
• For unions and adaptor unions
• Hardness approx. 65° Shore
• EPDM minimum temperature -40°C
• FPM minimum temperature -15°C
81
Tank adaptors
610502 Tank adaptor for fix position stop
PVC-U, Union end with socket metric
Model:
• End connection: union with solvent cement socket, metric
• Gaskets: flat gaskets EPDM
• Washer: PP
• Run-out holes: Two holes in octagonal head
• FPM flat gaskets available for tank adaptor type 050
d PN Code kg
[mm]
16 16 161 050 245 0.064
[mm] [mm] [mm] [mm] [mm] [mm] [mm] max [mm] [inch] [mm] [mm] of bore in
[mm] tank side
[mm]
16 5 44 29 77 58 11 19 14 3∕4 32 40 28
20 5 54 35 83 61 12 17 16 1 40 50 35
25 5 60 42 90 65 13 18 19 1 1∕4 50 55 43
32 5 69 49 95 67 13 19 22 1 1∕2 56 65 49
40 5 84 59 104 72 13 16 26 2 69 80 61
50 5 92 70 113 76 15 16 31 2 1∕4 76 85 67
63 5 108 82 128 84 15 19 38 2 3∕4 95 100 83
610503 Tank adaptor for fix position stop
PVC-U, Union end with spigot / reducing socket metric
Model:
• End connection: union with union end spigot/reducing socket, metric
• Gaskets: flat gaskets EPDM
• Washer: PP
• Run-out holes: Two holes in octagonal head
• FPM flat gaskets available for tank adaptor type 050
d d1 PN EPDM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] max [mm] [mm] [inch] [mm] [mm] of bore in
[mm] tank side
[mm]
16 5 44 29 96 58 11 19 14 12 3∕4 32 40 28
20 5 54 35 104 61 12 17 16 14 1 40 50 35
25 5 60 42 112 65 13 18 19 16 1 1∕4 50 55 43
32 5 69 49 119 67 13 19 22 19 1 1∕2 56 65 49
40 5 84 59 132 72 13 16 26 22 2 69 80 61
50 5 92 70 145 76 15 16 31 26 2 1∕4 76 85 67
63 5 108 82 163 84 15 19 38 31 2 3∕4 95 100 83
83
Branch and tapping saddles
Branch Saddle
Model:
• For PVC pipes
• Top saddle for solvent cement bonding
• This article is also available upon request in inch sizes according to BS
3505:1968 under cat. no. 21 116
84
21 110 200 Repair saddle
• For operating pressure up to 10 bar water
• For repair of damaged pipes
• Saddle halves can be solvent cemented
• Cementing only possible on dry mains without pressure
d Code kg Max. pipe L
61 49 06 Backing nut PVC-U
Model:
• With parallel female thread Rp
• Spare part for tank adaptor type 050
Rp Code kg D L
85
POLY16 Plus CLAMP SADDLES
654 - Blue clamp saddles with stainless steel reinforcing ring,
flat gasket and galvanized bolts and nuts (PN16-PN10)
• water PN16-10
• suitable for PE and PVC pipes
• female thread: ISO 7 (parallel)
• material: PP
• gasket: O-ring with flat lip (NBR)
• reinforcement ring: stainless steel AISI430
• bolts and nuts : galvanized
• colour: blue
• B= N° of bolts
• M= bolt type
• (*) with O-ring gasket
d Rp PN B M Code kg
[mm] [inch]
* 20 1∕2 16 2 M8X40 158 001 041 0.119
[mm] [inch]
110 2 16 6 M8X50 158 001 076 0.570
* 25 1∕2 13 49 79 58 15
* 25 3∕4 13 49 79 58 15
* 32 1∕2 14 49 79 62 20
* 32 3∕4 14 49 79 62 20
* 32 1 14 62 87 70 20
40 1∕2 21 62 86 71 20
40 3∕4 21 62 86 71 20
40 1 21 62 86 70 19
50 1∕2 21 62 86 82 20
50 3∕4 21 62 86 82 20
50 1 21 62 86 82 20
50 1 1∕4 21 62 86 82 20
63 1∕2 18 62 101 96 21
63 3∕4 24 62 101 96 21
63 1 31 62 101 96 21
63 1 1∕4 31 62 101 96 21
63 1 1∕2 31 62 101 96 21
75 1∕2 16 79 123 102 14
75 3∕4 21 79 123 104 16
75 1 27 79 123 107 19
75 1 1∕4 35 79 123 109 21
75 1 1∕2 42 79 123 109 21
75 2 53 79 123 112 24
90 1∕2 16 87 138 116 14
89
Ball valves 546
Ball valve type 546 PVC-U
With solvent cement sockets Inch BS
Model:
• For easy installation and removal
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
• Ball seals PTFE
• Without mounting inserts
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
Inch DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
3∕8 50 57 27 92 77 56 25 32 45 60
1∕2 50 57 27 95 77 56 25 32 45 60
3∕4 58 67 30 110 97 65 25 39 58 69
1 68 73 36 123 97 71 25 39 58 75
1 1∕4 84 90 44 146 128 85 45 54 74 89
90
Ball valve type 546 PVC-U
With mounting inserts
With solvent cement sockets inch BS
Model:
• For easy installation and removal
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
• Ball seals PTFE
• Integrated stainless steel mounting inserts
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
Inch DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
3∕8 50 57 27 12 92 77 56 25 32 45 6 67
1∕2 50 57 27 12 95 77 56 25 32 45 6 61
3∕4 58 67 30 12 110 97 65 25 39 58 6 70
1 68 73 36 12 123 97 71 25 39 58 6 76
1 1∕4 84 90 44 15 146 128 85 45 54 74 8 90
91
Ball valve type 546 PVC-U
With lockable handle
With solvent cement sockets Inch BS
Model:
• For easy installation and removal
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
• Ball seals PTFE
• Integrated stainless steel mounting inserts
• Lockable hand lever with ratchet settings
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
Inch DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
3∕8 50 79 27 12 92 87 56 25 42 45 M6 60
1∕2 50 79 27 12 95 87 56 25 42 45 M6 60
3∕4 58 88 30 12 110 108 65 25 50 58 M6 69
1 68 94 36 12 123 108 71 25 50 58 M6 75
1 1∕4 84 113 44 15 146 140 85 45 66 75 M8 89
92
Ball valve type 546 PVC-U
With lockable handle
With solvent cement sockets metric
Model:
• For easy installation and removal
• Ball seals PTFE
• Integrated stainless steel mounting inserts
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
• Lockable hand lever with ratchet settings
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
d Inch DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 50 79 27 12 92 87 56 25 42 45 M6 64
20 50 79 27 12 95 87 56 25 42 45 M6 64
25 58 88 30 12 110 108 65 25 50 58 M6 72
32 68 94 36 12 123 108 71 25 50 58 M6 79
40 84 113 44 15 146 140 85 45 66 75 M8 94
93
Ball valve type 546 PVC-U
With mounting inserts
With solvent cement sockets metric
Model:
• For easy installation and removal
• Ball seals PTFE
• Integrated stainless steel mounting inserts
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
d Inch DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 50 57 27 12 92 77 56 25 32 45 6 64
20 50 57 27 12 95 77 56 25 32 45 6 64
25 58 67 30 12 110 97 65 25 39 58 6 72
32 68 73 36 12 123 97 71 25 39 58 6 79
40 84 90 44 15 146 128 85 45 54 74 8 94
50 97 97 51 15 157 128 89 45 54 74 8 95
63 124 116 64 15 183 152 101 45 66 87 8 107
75 166 149 85 15 233 270 136 70 64 206 8 144
90 200 161 105 15 254 270 141 70 64 206 8 151
110 238 178 123 22 301 320 164 120 64 256 12 174
94
Ball valve type 546 PVC-U
With mounting inserts
With fusion sockets PE100 metric
Model:
• For easy installation and removal
• Ball seals PTFE
• Integrated stainless steel mounting inserts
• z-dimension, valve end and union nut are not compatible with type 346
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
d DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 50 57 27 12 93 77 56 25 32 45 M6 67
20 50 57 27 12 95 77 56 25 32 45 M6 66
25 58 67 30 12 108 97 65 25 39 58 M6 77
32 68 73 36 12 119 97 71 25 39 58 M6 83
40 84 90 44 15 137 128 85 45 54 74 M8 99
50 97 97 51 15 147 128 89 45 54 74 M8 105
63 124 116 64 15 168 152 101 45 66 87 M8 113
95
Ball valve type 546 PVC-U
With mounting inserts
With butt fusion spigots long PE100 SDR11 metric
Model:
• For easy installation and removal
• Ball seals PTFE
• Integrated stainless steel mounting inserts
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
d DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
20 50 57 27 12 193 77 56 25 32 45 M6 2,25
25 58 67 30 12 216 97 65 25 39 58 M6 2,3
32 68 73 36 12 223 97 71 25 39 58 M6 2,9
40 84 90 44 15 249 128 85 45 54 74 M8 3,7
50 97 97 51 15 271 128 89 45 54 74 M8 4,6
96
Ball valve type 546 PVC-U
With mounting inserts
With backing flanges PVC-U metric
Model:
• For easy installation and removal
• Ball seals PTFE
• Integrated stainless steel mounting inserts
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
• Overall length according to EN 558
• Connecting dimension: ISO 7005 PN10, EN 1092 PN10, DIN 2501 PN10
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
d DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
75 166 149 85 15 284 270 136 290 70 64 206 M8
97
Ball valve type 546 PVC-U
With solvent cement sockets metric
Model:
• For easy installation and removal
• Ball seals PTFE
• Without mounting inserts
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
d DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 50 57 27 92 77 56 25 32 45 64
20 50 57 27 95 77 56 25 32 45 64
25 58 67 30 110 97 65 25 39 58 72
32 68 73 36 123 97 71 25 39 58 79
40 84 90 44 146 128 85 45 54 74 94
50 97 97 51 157 128 89 45 54 74 95
63 124 116 64 183 152 101 45 66 87 107
75 166 149 85 233 270 136 70 64 206 144
90 200 161 105 254 270 141 70 64 206 151
110 238 178 123 301 320 164 120 64 256 174
98
Ball valve type 546 PVC-U
With solvent cement spigots metric
Model:
• For easy installation and removal
• Ball seals PTFE
• Without mounting inserts
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
d DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 50 57 27 114 77 56 25 32 45
20 50 57 27 124 77 56 130 25 32 45
25 58 67 30 144 97 65 150 25 39 58
32 68 73 36 154 97 71 160 25 39 58
40 84 90 44 174 128 85 180 45 54 74
99
Ball valve type 546 PVC-U
With threaded sockets Rp
Model:
• For easy installation and removal
• Ball seals PTFE
• Without mounting inserts
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
Rp DN PN kv-value EPDM FPM kg
[inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
3∕8 50 57 27 95 77 56 25 32 45 69
1∕2 50 57 27 100 77 56 25 32 45 67
3∕4 58 67 30 114 97 65 25 39 58 78
1 68 73 36 127 97 71 25 39 58 85
1 1∕4 84 90 44 146 128 85 45 54 74 100
100
Ball valve type 546 PVC-U
With fixed flanges PVC-U serrated metric
Model:
• For easy installation and removal
• Ball seals PTFE
• Without mounting inserts
• z-dimension, valve end and union nut are not compatible with type 346
• Overall length according to EN 558
• Connecting dimension: ISO 7005 PN10, EN 1092 PN10, DIN 2501 PN10
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
d DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
20 95 65 14 57 27 124 77 56 130 25 32 45
101
Ball valve type 546 PVC-U
With mounting inserts
With solvent cement sockets Inch ASTM
Inclusive 2 threaded valve ends NPT
Model:
• For easy installation and removal
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
• Ball seals PTFE
• Integrated stainless steel mounting inserts
• Threaded valve ends are only enclosed for DN10/15-50
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
Inch DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
3∕8 50 57 27 12 105 77 56 25 32 45 6 67
1∕2 50 57 27 12 105 77 56 25 32 45 6 61
3∕4 58 67 30 12 121 97 65 25 39 58 6 70
1 68 73 36 12 133 97 71 25 39 58 6 76
1 1∕4 84 90 44 15 154 128 85 45 54 74 8 90
102
Ball valve type 546 PVC-U
With lockable handle
With solvent cement sockets Inch ASTM
Inclusive 2 threaded valve ends NPT
Model:
• For easy installation and removal
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
• Ball seals PTFE
• Lockable hand lever with ratchet settings
• Integrated stainless steel mounting inserts
• Threaded valve ends are only enclosed for DN10/15-50
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
Inch DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
3∕8 50 79 27 12 105 87 56 25 42 45 M6 67
1∕2 50 79 27 12 105 87 56 25 42 45 M6 61
3∕4 58 88 30 12 121 108 65 25 50 58 M6 70
1 68 94 36 12 133 108 71 25 50 58 M6 76
1 1∕4 84 113 44 15 154 140 85 45 66 74 M8 90
103
Ball valve type 546 PVC-U
With solvent cement sockets Inch ASTM
Inclusive 2 threaded valve ends NPT
Model:
• For easy installation and removal
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
• Ball seals PTFE
• Without mounting inserts
• Threaded valve ends are only enclosed for DN10/15-50
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
Inch DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
3∕8 50 57 27 105 77 56 25 32 45 67
1∕2 50 57 27 105 77 56 25 32 45 61
3∕4 58 67 30 121 97 65 25 39 58 70
1 68 73 36 133 97 71 25 39 58 76
1 1∕4 84 90 44 154 128 85 45 54 74 90
104
Spare Parts Ball Valve Type 546
Spare parts ball valve type 546
Lever
d Inch DN Standard lever Standard lever Multifunctional kg
20 1∕2 15 167 484 088 167 484 076 167 484 100 0.026
25 3∕4 20 167 484 089 167 484 077 167 484 101 0.045
32 1 25 167 484 090 167 484 078 167 484 102 0.047
40 1 1∕4 32 167 484 091 167 484 079 167 484 103 0.091
50 1 1∕2 40 167 484 092 167 484 080 167 484 104 0.080
63 2 50 167 484 093 167 484 081 167 484 105 0.124
75 2 1∕2 65 167 484 094 167 484 082 161 486 689 0.468
90 3 80 167 484 095 167 484 083 161 486 690 0.467
110 4 100 167 484 096 167 484 084 161 486 691 0.543
105
Handle extension 546 and 543 PVC-U metric
Model:
• For ball valve type 546 and 543
• Composed of adapter sockets for handle connection and stem connection
• PVC-U pipe in suitable length has to be obtained on site
d-d DN-DN Code kg H H1 H2 H3 D
Handle extension 546 PVC-U inch BS/ASTM
Model:
• For Ball Valve Type 546
DN-DN Inch Code kg H H1 H2 H3 D
106
Handle extension for ball valve type 546 PVC-U
DN65 - DN100
Model:
• Multiple use in succession possible
• Height variable
d-d DN-DN Code kg D H H1
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 - 32 48 8 20 14 4 106 92 62 31 41 25
107
Multifunctional module (I02) PP-GF
Module empty
Model:
• Accessory to Ball Valve Type 546
• Multifunctional module acts as an intermediate element for actuators
• For operation with handle, multifunctional handle has to be ordered separate-
ly.
• Including screws to mount the module and stainless steel coupling piece
(V2A) for dimension DN65-100
• The multifunctional module from d75 - d110 has a master gauge F07 accord-
ing to EN ISO 5211.
d-d Inch DN-DN Code kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 - 20 67 27 50 17 72 87 54 40 42 45 34
25 - 32 75 30 53 16 72 108 52 46 50 58 38
40 - 50 81 44 72 16 80 140 60 50 66 75 41
- 63 91 64 94 19 93 165 68 65 78 87 46
75 - 90 90 85 157 23 85 270 64 206
- 110 106 123 175 23 97 320 64 256
Multifunctional module (I03) PP-GF
With mechanical limit switches Ag Ni
Model:
• Accessory to Ball Valve Type 546
• Multifunctional module acts as an intermediate element for actuators
• For operation with handle, multifunctional handle has to be ordered separate-
ly.
• Including Plug 3P+E / Protection: IP65
• Including screws to mount the module and stainless steel coupling piece
(V2A) for dimension DN65-100
d-d Inch DN-DN Code kg
25 - 32 30 53 108 50 58 38 77
40 - 50 44 72 140 66 75 41 80
25 - 32 30 53 108 50 58 38 77
40 - 50 44 72 140 66 75 41 80
- 63 64 94 165 78 87 46 85
75 - 90 85 157 270 64 206
- 110 123 175 320 64 256
109
Multifunctional module (I05) PP-GF
With inductive limit switches Namur
Model:
• Accessory to Ball Valve Type 546
• Multifunctional module acts as an intermediate element for actuators
• For operation with handle, multifunctional handle has to be ordered separate-
ly.
• Including Plug 3P+E / Protection: IP65
• Including screws to mount the module and stainless steel coupling piece
(V2A) for dimension DN65-100
d-d Inch DN-DN Code kg
25 - 32 30 53 108 50 58 38 77
40 - 50 44 72 140 66 75 41 80
- 63 64 94 165 78 87 46 85
75 - 90 85 157 270 64 206
- 110 123 175 320 64 256
Multifunctional module (I06) PP-GF
With inductive limit switches PNP
Model:
• Accessory to Ball Valve Type 546
• Multifunctional module acts as an intermediate element for actuators
• For operation with handle, multifunctional handle has to be ordered separate-
ly.
• Including Plug 3P+E / Protection: IP65
• Including screws to mount the module and stainless steel coupling piece
(V2A) for dimension DN65-100
d-d Inch DN-DN Code kg
25 - 32 30 53 108 50 58 38 77
40 - 50 44 72 140 66 75 41 80
25 - 32 30 53 108 50 58 38 77
40 - 50 44 72 140 66 75 41 80
- 63 64 94 165 78 87 46 85
75 - 90 85 157 270 64 206
- 110 123 175 320 64 256
111
Ball Valves 375
Ball valve type 375 PVC-U
With solvent cement sockets Inch BS
Model:
• For easy installation and removal
• z-dimension, valve end and union nut are not compatible with type 546
• Ball seals PTFE
• Actuator unit not connectable
Range of use:
• Basic applications of the water treatment sector as well as other applications
involving water.
Inch DN PN kv-value EPDM FPM kg
1∕2 50 53 80 67 42 40 48
3∕4 59 60 91 77 48 45 53
1 68 67 102 87 54 51 58
1 1∕4 80 79 120 102 62 59 68
112
Ball valve type 375 PVC-U
With solvent cement sockets metric
Model:
• For easy installation and removal
• z-dimension, valve end and union nut are not compatible with type 546
• Ball seals PTFE
• Actuator unit not connectable
Range of use:
• Basic applications of the water treatment sector as well as other applications
involving water.
d DN PN kv-value EPDM FPM kg
20 50 53 80 67 42 40 48
25 59 60 91 77 48 45 53
32 68 67 102 87 54 51 58
40 80 79 120 102 62 59 68
50 94 90 140 119 72 70 78
63 115 107 169 146 86 84 93
75 145 129 206 179 110 103 118
90 168 143 242 209 128 120 140
110 210 169 282 250 150 141 160
113
Ball valve type 375 PVC-U
With threaded sockets Rp
Model:
• For easy installation and removal
• z-dimension, valve end and union nut are not compatible with type 546
• Ball seals PTFE
• Actuator unit not connectable
Range of use:
• Basic applications of the water treatment sector as well as other applications
involving water.
Rp DN PN kv-value EPDM FPM kg
1∕2 50 53 80 67 42 40 48
3∕4 59 60 91 77 48 45 53
1 68 67 102 87 54 51 58
1 1∕4 80 79 116 102 62 59 68
114
Ball Valve Coloro
Ball valve coloro type 353 PVC-U
With solvent cement sockets ASTM/BS
Model:
• Lever blue
• Compact
• Ball seal HD-PE / lubricant compound
• Monobloc structure
• Actuator unit not connectable
• Only bulk pack GP are delivered
Inch DN PN EPDM kg z D L L1 H
115
Ball valve coloro type 353 PVC-U
With solvent cement sockets metric
Model:
• Lever blue
• Compact
• Ball seal HD-PE / lubricant compound
• Monobloc structure
• Actuator unit not connectable
• Only bulk pack GP are delivered
d DN PN EPDM kg z D L L1 H
117
Ball valve coloro type 355 PVC-U
With threaded sockets Rp
Model:
• Lever blue
• Ball seal HD-PE / lubricant compound
• Monobloc structure
• Actuator unit not connectable
• Only bulk pack GP are delivered
Rp DN PN EPDM kg z D L L1 L2 H
118
Ball Valves 543
3-Way ball valve type 543 PVC-U
Vertical/L-port
With solvent cement sockets metric
Model:
• Vertical inlet solvent cement spigot metric
• Easy installation and removal using union on third outlet
• Ball seals PTFE
• Electric actuator available separately
• Angle of operation 360° without turn limiter
• Delivery status B-C opened, see flow scheme
Mode of action:
• For interconnection of two inputs
d DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 50 92 77 56 32 45 57 62 64
20 50 95 77 56 32 45 57 62 64
25 58 111 97 66 39 58 67 72 74
32 68 123 97 71 39 58 73 77 79
40 84 146 128 85 54 74 90 87 95
50 97 157 128 89 54 74 97 97 95
63 124 183 152 101 66 87 116 112 107
119
3-Way ball valve type 543 PVC-U
Vertical/L-port
With threaded sockets Rp
Model:
• Vertical inlet solvent cement spigot metric
• Easy installation and removal using union on third outlet
• Ball seals PTFE
• Electric actuator available separately
• Angle of operation 360° without turn limiter
• Delivery status B-C opened, see flow scheme
Mode of action:
• For interconnection of two inputs
Rp DN PN kv-value EPDM FPM kg
[inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
3∕8 50 96 77 56 32 45 57 62 69
1∕2 50 99 77 56 32 45 57 62 67
3∕4 58 115 97 66 39 58 67 72 78
1 68 127 97 71 39 58 73 77 85
1 1∕4 84 144 128 85 54 74 90 87 100
1 1∕2 97 153 128 89 54 74 97 97 106
2 124 177 152 101 66 87 116 112 121
120
3-Way ball valve type 543 PVC-U
Vertical/L-port
With solvent cement spigots metric
Model:
• Vertical inlet solvent cement spigot metric
• Easy installation and removal using union on third outlet
• Ball seals PTFE
• Electric actuator available separately
• Angle of operation 360° without turn limiter
• Delivery status B-C opened, see flow scheme
Mode of action:
• For interconnection of two inputs
d DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 50 114 77 56 32 45 120 57 62
20 50 124 77 56 32 45 130 57 62
25 58 144 97 66 39 58 150 67 72
32 68 154 97 71 39 58 160 73 77
40 84 174 128 85 54 74 180 90 87
50 97 194 128 89 54 74 200 97 97
63 124 224 152 101 66 87 230 116 112
121
3-Way ball valve type 543 PVC-U
Vertical/L-port
With solvent cement sockets BS
Model:
• Vertical inlet solvent cement spigot metric
• Easy installation and removal using union on third outlet
• Ball seals PTFE
• Electric actuator available separately
• Angle of operation 360° without turn limiter
• Delivery status B-C opened, see flow scheme
Mode of action:
• For interconnection of two inputs
Inch DN PN kv-value EPDM FPM kg
1∕2 50 95 77 56 32 45 57 62 60
3∕4 58 111 97 66 39 58 67 72 69
1 68 123 97 71 39 58 73 77 75
1 1∕4 84 146 128 85 54 74 90 87 89
1 1∕2 97 157 128 89 54 74 97 97 97
2 124 183 152 101 66 87 116 112 110
122
3-Way ball valve type 543 PVC-U
Horizontal/L-port
With solvent cement sockets metric
Model:
• For easy installation and removal (valve end and union nut are compatible
with type 546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-C opened, see flow scheme
d DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 50 109 77 73 36 25 32 45 57 28 8 6 81 40
20 50 112 77 73 36 25 32 45 57 28 8 6 81 40
25 58 131 97 86 43 25 39 58 67 32 8 6 94 47
32 68 151 97 99 50 25 39 58 73 36 8 6 107 54
40 84 181 128 120 60 45 54 74 90 45 9 8 130 65
50 97 205 128 137 69 45 54 74 97 51 9 8 143 72
63 124 261 152 179 89 45 66 87 116 65 9 8 185 92
123
3-Way ball valve type 543 PVC-U
Horizontal/L-port
With threaded sockets Rp
Model:
• For easy installation and removal (valve end and union nut are compatible
with type 546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-C opened, see flow scheme
Rp DN PN kv-value EPDM FPM kg
[inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
3∕8 50 113 77 73 36 25 32 45 57 28 8 6 87 43
1∕2 50 117 77 73 36 25 32 45 57 28 8 6 85 42
3∕4 58 135 97 86 43 25 39 58 67 32 8 6 100 50
1 68 155 97 99 50 25 39 58 73 36 8 6 113 57
1 1∕4 84 179 128 120 60 45 54 74 90 45 9 8 134 67
1 1∕2 97 201 128 137 69 45 54 74 97 51 9 8 155 78
2 124 255 152 179 89 45 66 87 116 65 9 8 199 99
124
3-Way ball valve type 543 PVC-U
Horizontal/L-port
With solvent cement sockets BS
Model:
• For easy installation and removal (valve end and union nut are compatible
with type 546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-C opened, see flow scheme
Inch DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
3∕8 50 109 77 73 36 25 32 45 57 28 8 6 77 38
1∕2 50 112 77 73 36 25 32 45 57 28 8 6 77 38
3∕4 58 131 97 86 43 25 39 58 67 32 8 6 90 45
1 68 151 97 99 50 25 39 58 73 36 8 6 103 52
1 1∕4 84 181 128 120 60 45 54 74 90 45 9 8 124 62
1 1∕2 97 205 128 137 69 45 54 74 97 51 9 8 145 73
2 124 261 152 179 89 45 66 87 116 65 9 8 189 94
125
3-Way ball valve type 543 PVC-U
Horizontal/T-port
With solvent cement sockets BS
Model:
• For easy installation and removal (valve end and union nut are compatible
with type 546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-B-C opened, see flow scheme
Inch DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
3∕8 50 109 77 73 36 25 32 45 57 28 8 6 77 38
1∕2 50 112 77 73 36 25 32 45 57 28 8 6 77 38
3∕4 58 131 97 86 43 25 39 58 67 32 8 6 90 45
1 68 151 97 99 50 25 39 58 73 36 8 6 103 52
1 1∕4 84 181 128 120 60 45 54 74 90 45 9 8 124 62
1 1∕2 97 205 128 137 69 45 54 74 97 51 9 8 145 73
2 124 261 152 179 89 45 66 87 116 65 9 8 189 94
126
3-Way ball valve type 543 PVC-U
Horizontal/T-port
With solvent cement sockets metric
Model:
• For easy installation and removal (valve end and union nut are compatible
with type 546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-B-C opened, see flow scheme
d DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 50 109 77 73 36 25 32 45 57 28 8 6 81 40
20 50 112 77 73 36 25 32 45 57 28 8 6 81 40
25 58 131 97 86 43 25 39 58 67 32 8 6 94 47
32 68 151 97 99 50 25 39 58 73 36 8 6 107 54
40 84 181 128 120 60 45 54 74 90 45 9 8 130 65
50 97 205 128 137 69 45 54 74 97 51 9 8 143 72
63 124 261 152 179 89 45 66 87 116 65 9 8 185 92
127
3-Way ball valve type 543 PVC-U
Horizontal/T-port
With threaded sockets Rp
Model:
• For easy installation and removal (valve end and union nut are compatible
with type 546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-B-C opened, see flow scheme
Rp DN PN kv-value EPDM FPM kg
[inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
3∕8 50 113 77 73 36 25 32 45 57 28 8 6 87 43
1∕2 50 117 77 73 36 25 32 45 57 28 8 6 85 42
3∕4 58 135 97 86 43 25 39 58 67 32 8 6 100 50
1 68 155 97 99 50 25 39 58 73 36 8 6 113 57
1 1∕4 84 179 128 120 60 45 54 74 90 45 9 8 134 67
1 1∕2 97 201 128 137 69 45 54 74 97 51 9 8 155 78
2 124 255 152 179 89 45 66 87 116 65 9 8 199 99
128
3-Way ball valve type 543 PVC-U
Horizontal/T-port
With solvent cement spigots metric
Model:
• For easy installation and removal (valve end and union nut are compatible
with type 546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-B-C opened, see flow scheme
d DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 50 131 77 73 36 25 32 45 137 57 28 8 6
20 50 141 77 73 36 25 32 45 147 57 28 8 6
25 58 165 97 86 43 25 39 58 171 67 32 8 6
32 68 182 97 99 50 25 39 58 188 73 36 8 6
40 84 209 128 120 60 45 54 74 215 90 45 9 8
50 97 242 128 137 69 45 54 74 248 97 51 9 8
63 124 302 152 179 89 45 66 87 308 116 65 9 8
129
3-Way ball valve type 543 PVC-U
Horizontal/T-port
With butt fusion spigots long
PE100 SDR11 metric
Model:
• For easy installation and removal (valve end and union nut are compatible
with type 546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-B-C opened, see flow scheme
d DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
20 50 210 77 73 36 25 32 45 57 28 8 6 2.3
25 58 237 97 86 43 25 39 58 67 32 8 6 2.3
32 68 251 97 99 50 25 39 58 73 36 8 6 2.9
40 84 283 128 120 60 45 54 74 90 45 9 8 3.7
50 97 319 128 137 69 45 54 74 97 51 9 8 4.6
63 124 399 152 179 89 45 66 87 116 65 9 8 5.8
[mm] [mm] port red verter ball red lever L-port red
Code Code Code
16 3∕8 10 167 484 688 167 484 788 167 484 642
20 1∕2 15 167 484 688 167 484 788 167 484 642
25 3∕4 20 167 484 689 167 484 789 167 484 643
32 1 25 167 484 690 167 484 790 167 484 644
40 1 1∕4 32 167 484 691 167 484 791 167 484 645
50 1 1∕2 40 167 484 692 167 484 792 167 484 646
63 2 50 167 484 693 167 484 793 167 484 647
d Inch DN Multifunctional- kg
131
Metering ball valve 323
Metering ball valve type 323 PVC-U
With solvent cement sockets BS Inch
Model:
• For easy installation and removal
• Ball seals PTFE
• Angle of operation 180° with scale
Inch DN PN kv-value EPDM FPM kg
Inch z D L L1 L2 H
71 45 102 78 63 50
1∕2
Rp D L L1 L2 H z
1∕2 45 102 78 63 50 67
Metering ball valve type 323 PVC-U
With solvent cement spigots metric
Model:
• For easy installation and removal
• Ball seals PTFE
• Angle of operation 180° with scale
• Overall length EN 558
d DN PN kv-value EPDM FPM kg
20 45 124 78 63 130 50
132
Metering ball valve type 323 PVC-U
With solvent cement sockets metric
Model:
• For easy installation and removal
• Ball seals PTFE
• Angle of operation 180° with scale
d DN PN kv-value EPDM FPM kg
20 71 45 102 78 63 50
133
Linear ball valves
Linear ball valve type 546 PVC-U
With mounting inserts
With solvent cement sockets metric
Model:
• For easy installation and removal
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
• Ball seals PTFE
• Integrated stainless steel mounting inserts
• Lockable hand lever with ratchet settings
• Linear Ball available in DN15, DN25 and DN50
• Linear Ball makes a linear flow charcteristic possible
• Opening scale printed on multifunctional modul
Option:
• Individual configuration of the valve (see diagram)
d DN kv-100-val- EPDM FPM kg
134
Laboratory ball cock 322
Laboratory ball cock type 322 PVC-U
With solvent cement sockets Inch BS/ASTM
Model:
• Disconnection one end only
• Ball seals PTFE
• Angle of operation 90°
Inch DN PN EPDM FPM kg
1/4 36 25 34 60 45 38
Laboratory ball cock type 322 PVC-U
With solvent cement sockets metric
Model:
• Disconnection one end only
• Ball seals PTFE
d DN PN EPDM FPM kg
12 34 60 45 38 36 25
135
Diaphragm valves
Diaphragm valve type 514 PVC-U
With solvent cement sockets BS
Model:
• Double flow rate compared to predecessor
• One housing nut replaces four screws
• Handwheel with built-in locking mechanism
• For easy installation and removal
• Short overall length
Option:
• Individual configuration of the valve (see diagram)
• Self adjusting multifunctional module with integrated limit switches
• PN16 available as a configuration
Inch DN PN kv-value NBR EPDM PTFE/EPDM
3∕4 20 10 271 161 514 503 161 514 513 161 514 533
1 25 10 481 161 514 504 161 514 514 161 514 534
1 1∕4 32 10 759 161 514 505 161 514 515 161 514 535
1 1∕2 40 10 1263 161 514 506 161 514 516 161 514 536
2 50 10 1728 161 514 507 161 514 517 161 514 537
Inch DN PN kv-value FPM kg
136
Diaphragm valve type 514 PVC-U
With solvent cement sockets metric
Model:
• Double flow rate compared to predecessor
• One housing nut replaces four screws
• Handwheel with built-in locking mechanism
• For easy installation and removal
• Short overall length
Option:
• Individual configuration of the valve (see diagram)
• Self adjusting multifunctional module with integrated limit switches
• PN16 available as a configuration
d DN PN kv-value NBR EPDM PTFE/EPDM
20 15 10 125 161 514 002 161 514 012 161 514 032
25 20 10 271 161 514 003 161 514 013 161 514 033
32 25 10 481 161 514 004 161 514 014 161 514 034
40 32 10 759 161 514 005 161 514 015 161 514 035
50 40 10 1263 161 514 006 161 514 016 161 514 036
63 50 10 1728 161 514 007 161 514 017 161 514 037
d DN PN kv-value FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] Hx
[mm]
16 65 65 43 170 25 73 14 12 M6 142 7
20 65 65 43 128 25 73 14 12 M6 96 7
25 80 65 51 152 25 81 18 12 M6 114 10
32 88 87 58 166 25 107 22 12 M6 122 13
40 101 87 72 192 45 115 26 15 M8 140 15
50 117 135 83 222 45 148 32 15 M8 160 19
63 144 135 100 266 45 166 39 15 M8 190 25
137
Diaphragm valve type 514 PVC-U
With threaded sockets Rp
Model:
• Double flow rate compared to predecessor
• One housing nut replaces four screws
• Handwheel with built-in locking mechanism
• For easy installation and removal
• Short overall length
Option:
• Individual configuration of the valve (see diagram)
• Self adjusting multifunctional module with integrated limit switches
• PN16 available as a configuration
Rp DN PN kv-value NBR EPDM PTFE/EPDM
3∕4 20 10 271 161 514 403 161 514 413 161 514 433
1 25 10 481 161 514 404 161 514 414 161 514 434
1 1∕4 32 10 759 161 514 405 161 514 415 161 514 435
1 1∕2 40 10 1263 161 514 406 161 514 416 161 514 436
2 50 10 1728 161 514 407 161 514 417 161 514 437
Rp DN PN kv-value FPM kg
[inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] Hx
[mm]
1∕2 65 65 43 128 25 73 14 12 M6 96 7
138
Diaphragm valve type 515 PVC-U
With solvent cement spigots metric
Model:
• Double flow rate compared to predecessor
• One housing nut replaces four screws
• Handwheel with built-in locking mechanism
• Overall length EN 558
Option:
• Individual configuration of the valve (see diagram)
• Self adjusting multifunctional module with integrated limit switches
• PN16 available as a configuration
d DN PN kv-value NBR EPDM PTFE/EPDM
25 20 10 271 161 515 003 161 515 013 161 515 033
32 25 10 481 161 515 004 161 515 014 161 515 034
40 32 10 759 161 515 005 161 515 015 161 515 035
50 40 10 1263 161 515 006 161 515 016 161 515 036
63 50 10 1728 161 515 007 161 515 017 161 515 037
d DN PN kv-value FPM kg
25 80 65 144 25 81 18 12 M6 10
32 88 87 154 25 107 22 12 M6 13
40 101 87 174 45 115 26 15 M8 15
50 117 135 194 45 148 32 15 M8 19
63 144 135 224 45 166 39 15 M8 25
139
Diaphragm valve type 517 PVC-U
With backing flanges PVC-U metric/BS
Model:
• Double flow rate compared to predecessor
• One housing nut replaces four screws
• Handwheel with built-in locking mechanism
• Overall length EN 558
• Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10,
BS 4504 PN 10
• Flat sealing faces
Option:
• Individual configuration of the valve (see diagram)
• Self adjusting multifunctional module with integrated limit switches
d DN PN kv-value NBR EPDM PTFE/EPDM
25 20 10 271 161 517 003 161 517 013 161 517 033
32 25 10 481 161 517 004 161 517 014 161 517 034
40 32 10 759 161 517 005 161 517 015 161 517 035
50 40 10 1263 161 517 006 161 517 016 161 517 036
63 50 10 1728 161 517 007 161 517 017 161 517 037
d DN PN kv-value FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] Hx
[mm]
20 65 65 95 65 14 130 25 73 14 12 M6 7
25 80 65 105 75 14 150 25 81 18 12 M6 10
32 88 87 115 85 14 160 25 107 22 12 M6 13
40 101 87 140 100 18 180 45 115 26 15 M8 15
50 117 135 150 110 18 200 45 148 32 15 M8 19
63 144 135 165 125 18 230 45 166 39 15 M8 25
140
Diaphragm valve type 317 PVC-U
With flanges PVC-U metric
Model:
• Flat sealing faces
• DN 15-65 with backing flange
• DN 80-150 with fixed flange
• Overall length according to EN 558
• Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10,
BS 4504 PN 10
Option:
• Handwheel lockable DN15-65 (basic version not lockable)
* DN80 and DN150 fixed flanges metric and Inch ANSI B16.5
d DN Inch PN kv-value NBR EPDM CSM
* 90 80 3 10 1700 161 317 009 161 317 024 161 317 054
110 100 4 10 2700 161 317 010 161 317 025 161 317 055
* 160 150 6 7 6033 161 317 012 161 317 027 161 317 057
d DN Inch PN kv-value PTFE with EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
75 185 145 152 18 290 70 201 46 15 M8 4
[mm] Hx
[mm]
75 30
* 90 40
110 50
* 160 70
141
Butterfly valve type 567 PVC-U
Bare shaft
Model:
• Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10,
ANSI/ASME B 16.5 Class 150, BS 1560: 1989, BS 4504, JIS B 2220
• Up to DN 300: Overall length according to EN558 (DN 50-200: line 25,
DN250, 300 line 16), ISO 5752
• Interface F07 for the dimensions DN50-200 according to DIN/ISO 5211
• Interface F10 for the dimensions DN250-300 according to DIN/ISO 5211
• Interface F12 for the Dimensions DN350-400 according to DIN/ISO 5211
d DN Inch PN kv-value EPDM FPM kg
160 150 6 10 16600 161 567 807 161 567 827 3.238
225 200 8 10 39600 161 567 808 161 567 828 5.127
280 250 10 10 51000 161 567 809 161 567 829 11.735
315 300 12 10 73000 161 567 810 161 567 830 15.936
355 350 14 6 90000 161 567 811 161 567 831 45.000
400 400 16 6 115000 161 567 812 161 567 832 55.000
d D D1 D1 d2 D3 D4 H1 H2 H3 H4 H5 L
[mm] [mm] min. max. [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
[mm] [mm]
63 19 120 125 104 70 90 77 134 27 23 11 45
75 54 35
90 67 50
110 88 74
140 113 97
142
Butterfly valve type 567 PVC-U
Hand lever with ratchet settings
Model:
• Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10,
ANSI/ASME B 16.5 Class 150, BS 1560: 1989, BS 4504, JIS B 2220
• Up to DN 300: Overall length according to EN558 (DN 50-200: line 25,
DN250, 300 line 16), ISO 5752
• We recommend for the dimensions DN250 and DN300 only 6 bar maximum
system pressure for the hand lever version
d DN Inch PN kv-value EPDM FPM kg
160 150 6 10 16600 161 567 007 161 567 027 3.791
225 200 8 10 39600 161 567 008 161 567 028 6.570
280 250 10 10 55200 161 567 009 161 567 029 12.998
315 300 12 10 80000 161 567 010 161 567 030 19.139
d D D1 D1 d2 H H1 H2 H3 L L1 L2 Q1
[mm] [mm] min. max. [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
[mm] [mm]
63 19 120.0 125.0 104 264 77 134 54 45 106 205 40
160 24 241.3 241.3 215 373 130 189 55 72 106 255 139
225 23 290.0 295.0 267 435 158 210 67 73 140 408 178
280 25 353.0 362.0 329 554 205 264 85 113 149 408 210
315 25 400.0 432.0 379 598 228 285 85 113 149 408 256
d Q2
[mm] [mm]
63
75 35
90 50
110 74
140 97
160 123
225 169
280 207
315 253
143
Butterfly valve type 567 PVC-U
Reduction gear with handwheel
Model:
• Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10,
ANSI/ASME B 16.5 Class 150, BS 1560: 1989, BS 4504, JIS B 2220
• Up to DN 300: Overall length according to EN558 (DN 50-200: line 25,
DN250, 300 line 16), ISO 5752
d DN Inch PN kv-value EPDM FPM kg
160 150 6 10 16600 161 567 047 161 567 067 5.181
225 200 8 10 39600 161 567 048 161 567 068 8.339
280 250 10 10 51000 161 567 049 161 567 069 15.115
315 300 12 10 73000 161 567 050 161 567 070 35.000
355 350 14 8 90000 161 567 051 161 567 071 55.000
400 400 16 8 115000 161 567 052 161 567 072 60.000
d D D1 D1 d2 D3 H1 H2 H3 L L1 L2 L3
[mm] [mm] min. max. [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
[mm] [mm]
63 19 120 125 104 150 77 134 50 45 110 120 155
160 24 241 241 215 150 130 189 50 72 110 120 155
225 23 290 295 267 150 158 210 50 73 110 120 155
280 25 353 362 329 200 205 264 55 113 130 140 200
315 25 400 432 379 200 228 285 55 113 130 140 200
355 29 445 477 535 200 268 410 69 129 180 168 218
400 29 510 540 595 200 300 435 69 169 180 195 218
d Q1 Q2
75 54 35
90 67 50
110 88 74
140 113 97
144
Integrated position indicator
Automatic AU
Size DN-DN Code kg
[mm]
1 50 - 80 161 486 858 0.072
[mm]
1 50 - 80 161 486 859 0.063
[mm]
1 50 - 80 161 486 855 0.050
[mm]
1 50 - 80 161 486 856 0.056
[mm]
1 50 - 80 161 486 857 0.056
145
Lugstyle butterfly valve type 568 PVC-U
Hand lever with ratchet settings
Model:
• Outer body in GGG-40.3 epoxy-coated
• Connecting dimension: ISO 7005 PN10, EN 1092 PN10, DIN 2501 PN10
• Overall length according to EN 558, ISO 5752
d DN Inch PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
63 150 M16 125 265 77 134 54 45 106 205 150 40
146
Lugstyle butterfly valve type 568 PVC-U
Reduction gear with handwheel
Model:
• Outer body in GGG-40.3 epoxy-coated
• Connecting dimension: ISO 7005 PN10, EN 1092 PN10, DIN 2501 PN10
• Overall length according to EN 558, ISO 5752
d DN Inch PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
63 150 M16 125 150 279 77 134 50 45 110 120 155 150
75 170 M16 145 150 291 83 140 50 46 110 120 155 160
90 184 M16 160 150 303 89 146 50 49 110 120 155 205
110 216 M16 180 150 339 104 167 50 56 110 120 155 244
140 246 M16 210 150 366 117 181 50 64 110 120 155 272
160 273 M20 240 150 387 130 189 50 72 110 120 155 297
225 334 M20 295 150 436 158 210 50 73 110 120 155 360
d Q1 Q2
75 54 35
90 67 50
110 88 74
140 113 97
160 139 123
225 178 169
147
Lugstyle butterfly valve type 568 PVC-U
Hand lever with ratchet settings
Model:
• Outer body in GGG-40.3 epoxy-coated
• Connecting dimension ANSI/ASME B 16.5 Class 150
• Overall length according to EN 558, ISO 5752
Inch DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
2 150 UNC 5/8 121 265 77 134 54 45 106 205 150 40
2 1∕2 170 UNC 5/8 138 277 83 140 54 46 106 205 160 54
3 177 UNC 5/8 152 289 89 146 54 49 106 205 175 67
4 216 UNC 5/8 191 326 104 167 55 56 106 255 244 88
5 246 UNC 3/4 216 353 117 181 55 64 106 255 272 113
6 273 UNC 3/4 241 374 130 189 55 72 106 255 297 139
8 334 UNC 3/4 298 435 158 210 67 73 140 408 360 178
Inch Q2
[mm]
2
2 1∕2 35
3 50
4 74
5 97
6 123
8 169
148
Lugstyle butterfly valve type 568 PVC-U
Reduction gear with handwheel
Model:
• Outer body in GGG-40.3 epoxy-coated
• Connecting dimension ANSI/ASME B 16.5 Class 150
• Overall length according to EN 558, ISO 5752
Inch DN PN kv-value EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
2 150 UNC 5/8 121 150 279 77 134 50 45 110 120 155
2 1∕2 170 UNC 5/8 138 150 291 83 140 50 46 110 120 155
3 177 UNC 5/8 152 150 303 89 146 50 49 110 120 155
4 216 UNC 5/8 191 150 339 104 167 50 56 110 120 155
5 246 UNC 3/4 216 150 366 117 181 50 64 110 120 155
6 273 UNC 3/4 241 150 387 130 189 50 72 110 120 155
8 334 UNC 3/4 298 150 436 158 210 50 73 110 120 155
Inch L4 Q1 Q2
2 1∕2 160 54 35
3 175 67 50
4 244 88 74
5 272 113 97
6 297 139 123
8 360 178 169
149
Metal - butterfly valve type 037M
With hand lever
Model:
• Housing: Aluminium ASTM S 12A, Rilsan® coated
• Seatliner available in EPDM and FPM
d DN Inch PN kv-value Cv value Disc: ductile iron/ Disc: ductile iron/
[mm] [mm] (Δp=1 bar) (Δp=1 psi) Rilsan® coated Rilsan® coated
[l/min] [gal (US) / EPDM FPM
min] Code Code
63 50 2 10 3140 220 199 037 000 199 037 013
160 150 6 10 27130 1900 199 037 005 199 037 018
225 200 8 10 47130 3330 199 037 006 199 037 019
280 250 10 10 77110 5400 199 037 007 199 037 020
315 300 12 10 114240 8000 199 037 008 199 037 021
d DN Inch PN kv-value Cv value Disc: stainless Disc: stainless
[mm] [mm] (Δp=1 bar) (Δp=1 psi) steel EPDM steel FPM
[l/min] [gal (US) / Code Code
min]
63 50 2 10 3140 220 199 037 200 199 037 213
160 150 6 10 27130 1900 199 037 205 199 037 218
225 200 8 10 47130 3330 199 037 206 199 037 219
280 250 10 10 77110 5400 199 037 207 199 037 220
315 300 12 10 114240 8000 199 037 208 199 037 221
d DN Inch PN kv-value Cv value Disc: Alu-bronze Disc: Alu-bronze
160 150 6 10 27130 1900 199 037 405 199 037 418
225 200 8 10 47130 3330 199 037 406 199 037 419
280 250 10 10 77110 5400 199 037 407 199 037 420
315 300 12 10 114240 8000 199 037 408 199 037 421
d DN d3 L L1 L2 H H1 H2 H3
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
63 50 95 43 45 220 290 53 140 95
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
225 200 262 60 45 320 489 149 245 95
[mm] [mm] (Δp=1 bar) (Δp=1 psi) Rilsan® coated Rilsan® coated
[l/min] [gal (US) / EPDM FPM
min] Code Code
63 50 2 10 3140 220 199 037 026 199 037 039
160 150 6 10 27130 1900 199 037 031 199 037 044
225 200 8 10 47130 3330 199 037 032 199 037 045
280 250 10 10 77110 5400 199 037 033 199 037 046
315 300 12 10 114240 8000 199 037 034 199 037 047
d DN Inch PN kv-value Cv value Disc: stainless Disc: stainless
[mm] [mm] (Δp=1 bar) (Δp=1 psi) steel EPDM steel FPM
[l/min] [gal (US) / Code Code
min]
63 50 2 10 3140 220 199 037 226 199 037 239
160 150 6 10 27130 1900 199 037 231 199 037 244
225 200 8 10 47130 3330 199 037 232 199 037 245
280 250 10 10 77110 5400 199 037 233 199 037 246
315 300 12 10 114240 8000 199 037 234 199 037 247
d DN Inch PN kv-value Cv value Disc: Alu-bronze
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
63 95 165 125 84 152 38 107 253 55 140 58
400 400 10 186700 198 037 021 198 037 031 81.200
d M D N D1 D2 D3 H1 H2 H3 L L1 L2 L3
[mm] [inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
355 1 26 12 476 442 125 291 307 55 78 75 180 282
[mm] [mm]
355 332
400 382
Metal - butterfly valve type 037G
Reduction gear with handwheel metric DN350-400
Model:
• Housing: Ductile Iron ASTM A 395, Epoxy coated
• Seatliner available in EPDM, FPM on request
• Disc available in Aluminium Bronze on request
• Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10,
BS 4504 PN 10
• Up to DN 500: Overall length according to EN558, line 20, ISO 5752
d DN PN kv-value Disc: Ductile Iron: Disc: stainless kg
400 400 10 186700 198 037 001 198 037 011 81.200
d M D N D1 D2 D3 H1 H2 H3 L L1 L2 L3
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
355 20 21 16 460 442 125 291 307 55 78 75 180 282
[mm] [mm]
355 332
400 382
Metal - butterfly valve type 038M
With hand lever
Model:
• Seatliner available in EPDM and FPM
[mm] [mm] (Δp=1 bar) (Δp=1 psi) Rilsan® coated Rilsan® coated
[l/min] [gal (US) / EPDM FPM
min] Code Code
63 50 2 10 3140 220 199 038 000 199 038 013
160 150 6 10 27130 1900 199 038 005 199 038 018
225 200 8 10 47130 3330 199 038 006 199 038 019
280 250 10 10 77110 5400 199 038 007 199 038 020
315 300 12 10 114240 8000 199 038 008 199 038 021
d DN Inch PN kv-value Cv value Disc: stainless Disc: stainless
[mm] [mm] (Δp=1 bar) (Δp=1 psi) steel EPDM steel FPM
[l/min] [gal (US) / Code Code
min]
63 50 2 10 3140 220 199 038 200 199 038 213
160 150 6 10 27130 1900 199 038 205 199 038 218
table continued next page
154
d DN Inch PN kv-value Cv value Disc: stainless Disc: stainless
[mm] [mm] (Δp=1 bar) (Δp=1 psi) steel EPDM steel FPM
[l/min] [gal (US) / Code Code
min]
225 200 8 10 47130 3330 199 038 206 199 038 219
280 250 10 10 77110 5400 199 038 207 199 038 220
315 300 12 10 114240 8000 199 038 208 199 038 221
d DN Inch PN kv-value Cv value Disc: Alu-bronze
155
Metal - butterfly valve type 038G
Reduction gear with handwheel
Model:
• Seatliner available in EPDM and FPM
[mm] [mm] (Δp=1 bar) (Δp=1 psi) Rilsan® coated Rilsan® coated
[l/min] [gal (US) / EPDM FPM
min] Code Code
63 50 2 10 3140 220 199 038 026 199 038 039
160 150 6 10 27130 1900 199 038 031 199 038 044
225 200 8 10 47130 3330 199 038 032 199 038 045
280 250 10 10 77110 5400 199 038 033 199 038 046
315 300 12 10 114240 8000 199 038 034 199 038 047
d DN Inch PN kv-value Cv value Disc: stainless Disc: stainless
[mm] [mm] (Δp=1 bar) (Δp=1 psi) steel EPDM steel FPM
[l/min] [gal (US) / Code Code
min]
63 50 2 10 3140 220 199 038 226 199 038 239
160 150 6 10 27130 1900 199 038 231 199 038 244
225 200 8 10 47130 3330 199 038 232 199 038 245
280 250 10 10 77110 5400 199 038 233 199 038 246
315 300 12 10 114240 8000 199 038 234 199 038 247
d DN Inch PN kv-value Cv value Disc: Alu-bronze
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
63 95 125 43 84 152 38 107 261 63 140 58
157
Angle seat valves
Angle seat valve type 300 PVC-U
With solvent cement spigots metric
Model:
• Overall length EN 558
d DN PN kv-value PE PTFE kg
158
Angle seat check valves
Angle seat check valve type 303 PVC-U
With solvent cement spigots metric
Model:
• For horizontal or vertical installation
• Leakproof from: EPDM 2m, FPM 3m water column
• Specific gravity of piston approx. 2 kg/dm³
• Overall length EN 558
d DN PN kv-value EPDM FPM kg
20 43 124 130 28 65
25 47 144 150 37 75
32 56 154 160 37 90
40 64 174 180 44 102
[mm] [mm]
16 10 161 123 250 0.114
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 62 8 7 78 67 10 22 76 55 11 15 9
20 65 9 7 82 74 10 25 86 65 11 17 11
25 73 9 8 91 87 11 30 100 76 12 20 17
32 84 9 8 102 104 13 35 102 78 12 23 14
40 90 9 8 107 122 15 42 116 85 16 27 17
160
Ball check valves
Ball check valve type 360 PVC-U
With solvent cement sockets Inch BS
Model:
• For easy installation and removal
• Ball is sealing at a minimum water column 2m
• Vibration free even at high flow velocity
Inch DN PN kv-value EPDM FPM kg
1∕2 71 45 102 63
3∕4 82 53 120 75
1 87 64 131 79
1 1∕4 98 78 150 89
1 1∕2 101 92 163 95
2 121 116 197 115
Ball check valve Type 360 PVC-U
With solvent cement sockets metric
Model:
• Union ends for easy installation and removal
• Ball is sealing at a minimum water column 2m
• Vibration free even at high flow velocity
• For horizontal or vertical installation
d DN PN kv-value EPDM FPM kg
20 71 45 102 63
25 82 53 120 75
32 87 64 131 79
50 101 92 163 95
63 121 116 197 115
20 45 124 63 130
25 53 144 75 150
32 64 154 79 160
40 78 174 89 180
50 92 194 95 200
63 116 224 115 230
* 90 300 310
162
Ball check valve Type 360 PVC-U
With threaded sockets Rp
Model:
• Union ends for easy installation and removal
• Ball is sealing at a minimum water column 2m
• Vibration free even at high flow velocity
• For horizontal or vertical installation
Rp DN PN kv-value EPDM FPM kg
1∕2 67 45 102 63
3∕4 79 53 120 75
1 83 64 131 79
1 1∕4 96 78 150 89
1 1∕2 109 92 163 95
2 135 116 197 115
Ball check valve Type 360 PVC-U
With fixed flanges serrated metric
Model:
• Union ends for easy installation and removal
• Ball is sealing at a minimum water column 2m
• Vibration free even at high flow velocity
• For horizontal or vertical installation
• Overall length EN 558
• Connecting Dimensions: metric 2501 PN 10
d DN Inch PN kv-value EPDM FPM kg
1∕2 50 95 56 60
3∕4 58 110 65 69
1 68 123 71 75
1 1∕4 84 146 85 89
1 1∕2 97 157 89 97
2 124 183 101 110
3 200 254 141 151
4 238 301 164 174
164
Check valve type 562 PVC-U
With solvent cement sockets Inch BS
Model:
• Spring loaded, spring made of stainless steel (1.4310)
• Spring available in other materials, see spare parts
• Designed for easy installation and removal
• Sealing at a minimum water column of 0.5m
• Vibration free even at high flow velocity
• Flow-optimized return cone, double guided
• For horizontal or vertical installation
• Compact installation length, same as ball valve type 546
• Z-length, end connectors and union nuts not compatible with type 360
• New DN65-DN100
Inch DN PN kv-value EPDM FPM kg
1∕2 50 95 56 60
3∕4 58 110 65 69
1 68 123 71 75
1 1∕4 84 146 85 89
1 1∕2 97 157 89 97
2 124 183 101 110
3 200 254 141 151
4 238 301 164 174
165
Cone check valves
Check valve type 561 PVC-U
With solvent cement sockets metric
Model:
• Designed for easy installation and removal
• Sealing at a minimum water column of 2m
• Vibration free even at high flow velocity
• Flow-optimized return cone, double guided
• For horizontal or vertical installation
• Compact installation length, same as ball valve type 546
• Z-length, end connectors and union nuts not compatible with type 360
• New DN65-DN100
d DN PN kv-value EPDM FPM kg
20 50 95 56 64
25 58 110 65 72
32 68 123 71 79
40 84 146 85 94
50 97 157 89 95
63 124 183 101 107
75 166 233 136 144
90 200 254 141 151
110 238 301 164 174
166
Check valve type 561 PVC-U
With solvent cement spigots metric
Model:
• Designed for easy installation and removal
• Sealing at a minimum water column of 2m
• Vibration free even at high flow velocity
• Flow-optimized return cone, double guided
• For horizontal or vertical installation
• Compact installation length, same as ball valve type 546
• Z-length, end connectors and union nuts not compatible with type 360
• New DN65-DN100
d DN PN kv-value EPDM FPM kg
20 50 124 56
25 58 144 65
32 68 154 71
40 84 174 85
50 97 194 89
63 124 224 101
75 166 284 136
90 200 300 141
110 238 340 164
167
Check valve type 561 PVC-U
With threaded sockets Rp
Model:
• Designed for easy installation and removal
• Sealing at a minimum water column of 2m
• Vibration free even at high flow velocity
• Flow-optimized return cone, double guided
• For horizontal or vertical installation
• Compact installation length, same as ball valve type 546
• Z-length, end connectors and union nuts not compatible with type 360
• New DN65-DN100
Rp DN PN kv-value EPDM FPM kg
1∕2 50 100 56 67
3∕4 58 114 65 78
1 68 127 71 85
1 1∕4 84 146 85 100
168
Check valve type 561 PVC-U
With fixed flanges metric
Model:
• Designed for easy installation and removal
• Sealing at a minimum water column of 2m
• Vibration free even at high flow velocity
• Flow-optimized return cone, double guided
• For horizontal or vertical installation
• Compact installation length, same as ball valve type 546
• Z-length, end connectors and union nuts not compatible with type 360
• Installation length according to EN 558-1
• Connecting dimension: ISO 7005 PN10, EN 1092 PN10, DIN 2501 PN10
d DN PN kv-value EPDM FPM kg
20 50 95 56 64
25 58 110 65 72
32 68 123 71 79
40 84 146 85 94
50 97 157 89 95
63 124 183 101 107
75 166 233 136 144
90 200 254 141 151
110 238 301 164 174
Check valve type 562 PVC-U
With solvent cement spigots metric
Model:
• Spring loaded, spring made of stainless steel (1.4310)
• Spring available in other materials, see spare parts
• Designed for easy installation and removal
• Sealing at a minimum water column of 0.5m
• Vibration free even at high flow velocity
• Flow-optimized return cone, double guided
• For horizontal or vertical installation
• Compact installation length, same as ball valve type 546
• Z-length, end connectors and union nuts not compatible with type 360
• New DN65-DN100
d DN PN kv-value EPDM FPM kg
20 50 124 56
25 58 144 65
32 68 154 71
40 84 174 85
1∕2 50 100 56 67
3∕4 58 114 65 78
1 68 127 71 85
1 1∕4 84 146 85 100
172
Process control valves
Ventilating and bleed valve
Type 591 PVC-U
With solvent cement sockets metric
Model:
• With protection cap up to DN50 made from PP-GF, DN65-100 made from
POM
• Floater made of PP-H
• Designed for easy installation and removal
• Compact installation length
d DN PN EPDM FPM kg D L t
Ventilating and bleed valve
Type 591 PVC-U
With solvent cement spigots metric
Model:
• With protection cap up to DN50 made from PP-GF, DN65-100 made from
POM
• Floater made of PP-H
• Designed for easy installation and removal
• Compact installation length
d DN PN EPDM FPM kg D L t
173
Ventilating and bleed valve
Type 591 PVC-U
With solvent cement sockets Inch BS
Model:
• With protection cap up to DN50 made from PP-GF, DN65-100 made from
POM
• Floater made of PP-H
• Designed for easy installation and removal
• Compact installation length
Inch DN PN EPDM FPM kg D L t
174
Ventilating valve type 595 PVC-U
With solvent cement spigots metric
Model:
• With protection cap up to DN50 made from PP-GF, DN65-100 made from
POM
• Spring loaded, spring made of NIMONIC 90, HALAR coated
• Spring available in other materials, see spare parts
• Designed for easy installation and removal
• Compact installation length
d DN PN EPDM FPM kg D L t
175
Wafer check valves
Wafer check valve type 369 PVC-U
Without spring
Model:
• Supporting eyelets for simple fitting
• Suitable for vertical and horizontal mounting
Installation instruction:
• Installation between ISO/DIN (all dimensions) and ANSI flange adaptors (all
except DN32 and DN125)
• Installation with ANSI flange adaptor: for wafer check valves DN40 to DN80
you have to use ANSI flange adaptors with the next bigger dimension (exam-
ple DN40 wafer check valve between DN50 ANSI flange adaptor)
• Centering by body diameter (ISO/DIN by D3, ANSI by D)
• Sealing with special flange gasket (except DN32, o-ring)
• A stabilizing zone of at least 5 times nominal diameter (DN) should be provid-
ed before and after the wafer check valve (10 times DN is recommended)
• No direct installation on pump flange or following bend allowed
• The using of PVC-U pipe PN16 is only possible up to d63
• Wafer check valves without reset spring are not recommended for pulsating
flows (production of noise)
d DN Inch PN EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] pressure sure horizontal
vertical [mbar]
[mbar]
40 85 59 18 85 15 22 25 10 1
50 105 74 22 95 16 27 27 10 1
63 124 90 32 109 18 40 29 10 1
75 137 110 40 129 20 55 31 10 1
90 175 130 54 144 20 67 32 10 1
50 2.0
63 2.0
75 2.0
90 2.0
110 2.0
140 2.0
160 2.0
225 2.0
280 2.0
315 2.0
Wafer check valve type 369 PVC-U
With V4A spring (stainless steel 316)
Model:
• Supporting eyelets for simple fitting
• Suitable for vertical and horizontal mounting
Installation instruction:
• Installation between ISO/DIN (all dimensions) and ANSI flange adaptors (all
except DN32 and DN125)
• Installation with ANSI flange adaptor: for wafer check valves DN40 to DN80
you have to use ANSI flange adaptors with the next bigger dimension (exam-
ple DN40 wafer check valve between DN50 ANSI flange adaptor)
• Centering by body diameter (ISO/DIN by D3, ANSI by D)
• Sealing with special flange gasket (except DN32, o-ring)
• A stabilizing zone of at least 5 times nominal diameter (DN) should be provid-
ed before and after the wafer check valve (10 times DN is recommended)
• No direct installation on pump flange or following bend allowed
• The using of PVC-U pipe PN16 is only possible up to d63
d DN Inch PN EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] pressure sure horizontal
vertical [mbar]
[mbar]
40 85 59 18 85 15 22 25 30 20
50 105 74 22 95 16 27 27 30 20
63 124 90 32 109 18 40 29 30 20
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] pressure sure horizontal
vertical [mbar]
[mbar]
75 137 110 40 129 20 55 31 30 20
50 2.0
63 2.0
75 2.0
90 2.0
110 2.0
140 2.0
160 2.0
225 2.0
280 2.0
315 2.0
Wafer check valve type 369 PVC-U
With Hastelloy C spring
Model:
• Supporting eyelets for simple fitting
• Suitable for vertical and horizontal mounting
Installation instruction:
• Installation between ISO/DIN (all dimensions) and ANSI flange adaptors (all
except DN32 and DN125)
• Installation with ANSI flange adaptor: for wafer check valves DN40 to DN80
you have to use ANSI flange adaptors with the next bigger dimension (exam-
ple DN40 wafer check valve between DN50 ANSI flange adaptor)
• Centering by body diameter (ISO/DIN by D3, ANSI by D)
• Sealing with special flange gasket (except DN32, o-ring)
• A stabilizing zone of at least 5 times nominal diameter (DN) should be provid-
ed before and after the wafer check valve (10 times DN is recommended)
• No direct installation on pump flange or following bend allowed
• The using of PVC-U pipe PN16 is only possible up to d63
d DN Inch PN EPDM FPM kg
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] pressure sure horizontal
vertical [mbar]
[mbar]
40 85 59 18 85 15 22 25 30 20
50 105 74 22 95 16 27 27 30 20
63 124 90 32 109 18 40 29 30 20
75 137 110 40 129 20 55 31 30 20
90 175 125 54 144 20 67 32 30 20
50 2.0
63 2.0
75 2.0
90 2.0
110 2.0
140 2.0
160 2.0
225 2.0
280 2.0
315 2.0
179
Strainers
Line strainer type 305 PVC-U
With solvent cement spigots metric
Model:
• Protects valves, pumps, etc. from becoming soiled
• Easy dismantling for cleaning the screens
• Screen perforation need be ordered separately
• Overall length according to EN 558
• supplied with 0.8mm screen in the UK
d DN PN EPDM FPM kg D L L1 L2 H
63 50 10 161 305 550 161 305 599 1.045 95 224 230 60 148
75 65 10 161 305 600 161 305 649 1.871 106 284 290 74 188
90 80 10 161 305 650 161 305 699 2.585 120 300 310 85 205
Line strainer type 305 PVC-U
Transparent body with solvent cement spigots metric
Model:
• Protects valves, pumps, etc. from becoming soiled
• Easy dismantling for cleaning the screens
• Screen perforation need be ordered separately
• Overall length according to EN 558
• supplied with 0.8mm screen in the UK
d DN PN EPDM FPM kg D L L1 L2 H
63 50 10 192 305 550 192 305 599 0.972 95 224 230 60 148
75 65 10 192 305 600 192 305 649 1.838 106 284 290 74 188
90 80 10 192 305 650 192 305 699 2.565 120 300 310 85 205
180
Line strainer type 306 PVC-U
Transparent body with solvent cement spigots ASTM
Model:
• Protects valves, pumps, etc. from becoming soiled
• Easy dismantling for cleaning the screens
• With screen PVC-U, perforation ø 0,8 mm
Inch DN PN EPDM FPM kg D L L1 L2 H
3∕4 20 10 192 306 350 192 306 399 0.170 47 160 166 45 76
1 25 10 192 306 400 192 306 449 0.255 56 174 180 47 90
1 1∕4 32 10 192 306 450 192 306 499 0.409 64 188 194 53 104
1 1∕2 40 10 192 306 500 192 306 549 0.635 82 205 211 54 124
2 50 10 192 306 550 192 306 599 1.000 95 225 231 63 148
3 80 10 192 306 650 192 306 699 2.800 120 311 321 90 205
Cylindrical screen type 305 PVC-U
Screen perforations 0.5 mm
• For line strainers Type 305
d Inch DN kv-value Code kg D L
181
Cylindrical screen type 305 PVC-U
Screen perforations 1.4 mm
d DN kv-value Code kg D L
182
Screen assemblies
Screen assembly type 050 PVC-U
With solvent cement sockets metric
d DN Inch kv-value Code kg D L L1 perforations ø
² 90 80 14790 161 050 033 0.944 110 345 312 2.5
³ 110 100 15213 161 050 034 1.338 125 490 460 2.5
183
Screen type 050 PVC-U
With solvent cement sockets BS/ASTM
• For Screen Assemblies Type 050, PVC-U, DN 65-100
d Inch DN Code kg D L2 lamina width
184
Inspection glass
Inspection glass type 001 PVC-U
Model:
• For visual inspection of the medium in the pipeline
• For horizontal or vertical installation
d DN PN EPDM FPM z D D1 L
185
Process control valves
Pressure reducing valve type V82 PVC-U
With solvent cement spigots metric
d DN Pressure EPDM PTFE kg
186
Pressure relief valve type V185 PVC-U
With solvent cement spigots metric
d DN Pressure EPDM PTFE kg
20 83 134 137 20
25 83 134 137 20
32 112 174 199 27
40 112 174 199 43
50 165 224 290 43
63 165 244 290 43
Pressure relief valve type V85 PVC-U
With solvent cement spigots metric
d DN Pressure EPDM PTFE kg
187
Pressure retaining valve type V186 PVC-U
With solvent cement spigots metric
d DN Pressure EPDM PTFE kg
20 83 134 137 20
25 83 134 137 20
32 112 174 199 27
40 112 174 199 43
50 165 224 290 43
63 165 244 290 43
Pressure retaining valve type V86 PVC-U
With solvent cement spigots metric
d DN Pressure EPDM PTFE kg
188
Gauge guard type Z700 PVC-U
With manometer 0-10 bar
d PTFE kg G_R D D1 H H1 H2
189
Variable area flow meters
Variable area flow meters
Float in PVDF without magnet
With solvent cement sockets PVC-U BS Inch
Scale range d DN Taper tube in Taper tube in
192
Short Version
Float in PVDF with magnet
With solvent cement sockets PVC-U BS Inch
Model:
• Suitable limit switches see accessories for variable area flow meters
• Union nuts and valve ends in other materials on request
Type d DN Scale range Taper tube in D L L1 L2
193
Variable area flow meter type 335
Float in PVDF without magnet
With solvent cement sockets PVC-U metric
Scale range d DN Taper tube in Taper tube in
194
Variable area flow meter type 335
Float in PVDF with magnet
With solvent cement sockets PVC-U metric
Model:
• Suitable limit switches see accessories for variable area flow meters
Scale range d DN Taper tube in Taper tube in
Short version
Float in PVDF without magnet
With solvent cement sockets PVC-U metric
Model:
• Union nuts and valve ends in other materials on request
Type d DN Scale range Taper tube in Taper tube in kg
196
Short version
Float in PVDF with magnet
With solvent cement sockets PVC-U metric
Model:
• Union nuts and valve ends in other materials on request
• Suitable limit switches see accessories for variable area flow meters
Type d DN Scale range Taper tube in Taper tube in kg
197
Variable area flow meters accessories
Accessories
4-20 mA sensor
For type 335 and type 350
Type d DN Corresponds to water scale Code kg
Accessories
Limit contacts GK10/GK11
For type 335/350 and short version
Type Code kg
198
Integral Systems ProcessPro: Flow
Type 2551 Magmeter Flow Sensor & PVC-U Fitting
199
Type 8150 Integral Flow Sensor & PVC-U Fitting
200
Type 8550 Integral Flow Sensor & PVC-U Fitting
201
202
Accessories
Page
Pipe Clips 204
Cleaner 210
Brushes 211
Seals 225
203
Pipe Clips
670610 KLIP-IT pipe clip type 061 PP BS
Model:
• 3/8" - 2": height designed for Ball Valve Type 546 and 543
• Material: Clip and safety clip PP black, UV resistant, bolts galvanized
• Minimum order quantity: standard packaging SP
d Code kg kg/m
[inch]
1∕4 167 061 054 0.003 0.003
3∕8 6 10 14 17 23 10 6 16 M5
1∕2 6 10 17 19 25 10 6 16 M5
3∕4 6 10 19 22 28 10 6 16 M5
1 6 10 24 27 31 10 6 16 M5
1 7 14 34 34 35 10 7 22 M6
1 1∕2 7 14 37 37 40 10 7 22 M6
2 9 17 45 45 52 10 10 25 M8
2 1∕2 9 17 52 52 58 10 10 25 M8
3 9 17 65 65 65 10 10 28 M8
4 9 17 79 79 81 10 10 28 M8
5 9 17 98 98 110 10 10 32 M8
204
KLIP-IT pipe clip type 061 PP metric
Model:
• Material: Clip and safety clip PP black, UV resistant, bolts galvanized
• d16 - d63: Height designed for Ball Valve Type 546 and 543
• Minimum order quantity: standard packagings SP
d d Code kg
[mm] [inch]
* 10 167 061 003 0.003
* 12 5 8 11 14 21 10 6 12 M5
* 16 6 11 14 17 27 10 6 16 M5
* 20 6 11 17 19 27 10 6 16 M5
* 25 6 11 19 22 30 10 6 16 M5
* 32 6 11 24 27 36 10 6 16 M5
40 7 14 34 34 44 10 7 22 M6
50 7 14 37 37 51 10 7 22 M6
63 9 17 45 45 64 10 10 25 M8
75 9 17 52 52 58 10 10 25 M8
90 9 17 65 65 65 10 10 28 M8
110 9 17 79 79 75 10 10 28 M8
125 9 17 88 88 90 10 10 32 M8
140 9 17 98 98 110 10 10 32 M8
160 9 17 109 109 108 10 10 32 M8
KLIP-IT spacer type 061 PP
Model:
• For pipe clips Type 061/061H, PP black, UV resistant
• Minimum order quantity: standard packaging SP
d Inch Code kg D L1 L2 H H1 H2 SC
• Height not designed for ball valve 546 and 543. Please use spacer 73 06 11.
d Code kg D D1 L1 L2 H H1 H2 H3 SC
[mm]
1/8-1/4 173 061 153 0.003 0.003
[mm]
125 41/2 173 061 165 0.059 0.059
16 6 14 17 20 10 16 M5
20 6 17 19 20 10 16 M5
25 6 19 22 20 10 16 M5
32 6 24 27 20 10 16 M5
40 7 34 34 20 10 22 M6
50 7 37 37 20 10 22 M6
63 9 45 45 20 10 25 M8
75 9 52 52 20 10 25 M8
90 9 65 65 20 10 28 M8
110 9 79 79 20 10 28 M8
125 9 88 88 20 10 32 M8
140 9 98 98 20 10 32 M8
160 9 109 109 20 10 32 M8
Pipe clip type 060 PP metric
Model:
• Material: Clip and safety clip PP black, UV resistant, bolts galvanized
• Accidental opening of the safety clip is not possible
• Minimum order quantity: standard packaging SP or gross packaging GP
• Clip and safety clip are not assembled in the packaging.
• Pipes with flanges can be installed directly
d d Code kg D L L1 H H1 H2 SC
207
Pipe clip type 060 PP BS
Model:
• Material: Clip and safety clip PP black, UV resistant, bolts galvanized
• Accidental opening of the safety clip is not possible
• Minimum order quantity: standard packaging SP or gross packaging GP
• Clip and safety clip are not assembled in the packaging.
d d Code kg kg/m D L L1 H H1 H2 SC
208
Solvent Cements
99 29 80 Tangit solvent cement for PVC-U
Description Code kg
Code
209
Cleaner
99 29 80 Tangit cleaner
Model:
• For PVC-U, PVC-C, ABS
• 1 litre tin
Code kg
Dytex solvent/cleaner
Model:
• For PVC-U, PVC-C
• Tin à 500ml
Code kg kg/m
210
Brushes
Round brush
d-d Code kg kg/m
[mm]
6 - 10 799 299 001 0.004 0.004
[mm]
40 - 63 799 299 003 0.015 0.015
211
Tools for Pipeline Construction
90 30 90 Chamfering tools
• Chamfering tool (15° bevel) for plastic pipes (PVC, ABS, PB, PP, PE). Coat-
ed prism surface suitable for clean room applications. Fast and reliable adjust-
ment to the different pipe diameters and wall thickness.
d-d Code kg kg/m
[mm]
16 - 200 790 309 003 1.024 1.024
[mm]
10 - 63 PPC 63, s max. = 7.2mm 790 109 001 0.865 0.865
50 - 110 PPC 110, s max. = 12.7mm 790 109 002 1.624 1.624
110 - 160 PPC 160, s max. = 19.0mm 790 109 003 2.212 2.212
90 10 90 Replacement cutting wheels
• for plastic pipe cutter
d-d Article Code kg kg/m
[mm]
10 - 63 SR 63 max. s=7,2 mm 790 109 011 0.004 0.004
[mm]
160 - 355 790 202 001 28.457 28.457
212
Backing Flanges
24 70 14 Backing Flange, Galvanised Steel
for Socket Systems
Model:
• Galvanised steel, suitable for laying underground
• Connecting dimensions: BS10:1962
• Bolt circle Table D &E
213
24 70 16 Backing Flange, Galvanised Steel
for Socket Systems
Model:
• Galvanised steel, suitable for laying underground
• Connecting dimension: ISO 7005, EN 1092, BS 4504, DIN 2501
• Bolt circle PN10/16
214
24 70 18 Backing Flange, Galvanised Steel
for Socket Systems
Model:
• Galvanised steel, suitable for laying underground
• Connecting dimension: ANSI/ASME B 16.5 class 150, ASTM D 4024, BS
1560, BS EN 1759
• Bolt circle Class 150
25 20 3∕4 98 70 34 16 7 4 M12x60
32 25 1 108 79 42 16 7 4 M12x60
40 32 1 1∕4 117 89 51 16 8 4 M12x70
50 40 1 1∕2 127 98 62 16 8 4 M12x75
215
21 70 00 Backing flange PVC-U metric
Model:
• For socket systems
• Connecting dimension: ISO 7005, EN 1092, BS 4504, DIN 2501
• Maximum medium- or ambient temperature 45 °C
• Bolt circle PN 10
¹ Connecting dimension: ISO 2536, bolt circle acc. DN125, suitable for flange
adaptor d125/DN100
² Connecting dimension: ISO 2536, bolt circle acc. DN225, suitable for flange
adaptor d250/DN250
AL: number of holes
d DN Inch PN Code kg
[mm] [mm]
16 10 3∕8 10 721 700 005 0.054
20 95 65 28 14 11 1 4 M12
25 105 75 34 14 12 2 4 M12
32 115 85 42 14 14 2 4 M12
40 140 100 51 18 15 2 4 M16
[mm] [mm]
1∕2 15 10 721 702 206 0.068 0.068
3∕4 20 105 70 34 16 12 2 4
1 25 115 79 42 16 14 2 4
1 1∕4 32 140 89 51 16 15 2 4
1 1∕2 40 150 98 62 16 16 2 4
2 50 165 121 78 19 18 3 4
2 1∕2 65 185 140 92 19 19 3 4
3 80 200 152 110 19 20 3 4
4 100 220 190 138 19 22 3 8
* 4 100 110 220 190 133 19 22 3 8
217
27 70 04 Backing Flanges, PP-V
27 70 05 For socket systems metric
Model:
• Modern full-plastic flange PP-GF (30 % glass-fibre reinforced)
• With V-groove which applies force evenly on collar
• With integrated bolt retainers as an assembly aid
• UV-resistant. Applicable for outside applications
• Connecting dimension: ISO 7005, EN 1092, BS 4504, DIN 2501
• Bolt circle PN 10
[mm] [mm]
20 15 16 727 700 406 183 38 09 0.093
218
27 70 14 Backing Flanges, PP-V
27 70 15 For socket systems Inch ANSI
Model:
• Modern full-plastic flange PP-GF (30 % glass-fibre reinforced)
• With V-groove which applies force evenly on collar
• With integrated bolt-fixing as an assembly aid
• UV-resistant. Applicable for outside applications
• Connecting dimension: ANSI/ASME B 16.5 class 150, ASTM D 4024, BS
1560, BS EN 1759
• Bolt circle class 150
• DN100 and DN150: only for use with original metric flange adaptors
¹) Suitable for socket- and butt fusion systems (no pictograph on flange)
AL: number of holes
Inch DN PN Code LVI kg kg/m
[mm]
¹ 1∕2 15 16 727 701 406 0.091 0.091
219
27 70 02 Backing flange PP-Steel
For socket systems metric
Model:
• PP-GF (30% glass-fibre reinforced) with steel ring
• UV-resistant. Applicable for outside applications
• Connecting dimension: ISO 7005, EN 1092, BS 4504, DIN 2501
• Bolt circle PN 10
¹ Connecting dimension: ISO 2536, bolt circle acc. DN125, suitable for flange
adaptor d125/DN100
² Connecting dimension: ISO 2536, bolt circle acc. DN225, suitable for flange
adaptor d250/DN250
AL: number of holes
d d DN PN Code kg
25 105 75 34 14 12 4 M12
32 115 85 42 14 16 4 M12
40 140 100 51 18 16 4 M16
50 150 110 62 18 20 4 M16
3∕4 70 34 16 105 12 4
1 79 42 16 115 16 4
1 1∕4 89 51 16 140 16 4
1 1∕2 98 62 16 150 18 4
2 121 78 19 165 18 4
2 1∕2 140 92 19 185 18 4
3 152 108 19 200 20 4
4 190 128 19 229 20 8
6 240 178 22 285 24 8
8 298 235 22 340 27 8
8 298 238 22 340 27 8
221
21 70 12 Blanking flange PVC-U
Drilled to BS 10
d PN Code kg kg/m c D h holes
21 70 11 Blanking flange PVC-U
Drilled to BS 4504 PN10/16
d PN Code kg kg/m c D h holes
222
21 70 10 Blanking flange PVC-U
Undrilled
d PN Code kg kg/m D h
[mm] [mm]
* 20 15 1/2 10 721 700 506 0.075 0.075
[mm] [mm] [mm] min. max. [mm] [mm] [mm] [mm] [mm]
[mm] [mm]
* 20 95 61.0 63.0 34 16 15 15 12 4
[mm] [mm] [mm] min. max. [mm] [mm] [mm] [mm] [mm]
[mm] [mm]
* 63 165 121.0 124.0 91 19 57 25 20 4
224
Seals
EPDM 48 41 00 O-Ring gasket
FPM 49 41 00
Model:
• For unions and adaptor unions
• Hardness approx. 65° Shore
• EPDM minimum temperature -40°C
• FPM minimum temperature -15°C
225
EPDM 48 40 00 Flat Gaskets
FPM 49 40 00
Model:
• For Flange Adaptors 21 79 01/21 80 01
• Hardness: 70° Shore EPDM, 75° Shore FPM
d DN Inch PN EPDM FPM kg kg/m
20 32 20 2
25 39 25 2
32 48 32 2
40 59 40 3
63 88 63 3
75 104 75 3
90 123 90 3
110 148 110 4
140 186 140 4
160 211 160 4
225 272 220 5
226
EPDM 48 40 03 Flat gasket
Model:
• For all metric GF Flange Adaptors
• Hardness approx. 65° Shore
• Integrated fixation aids from d110
• Centering on the inner diameter of the screw crown
20 15 51 20 2 10 - 30
25 20 61 25 2 15 - 35
32 25 71 32 2 22 - 42
40 32 82 40 3 30 - 50
50 40 92 50 3 40 - 60
63 50 107 63 3 53 - 73
75 65 127 71 3 61 - 81
90 80 142 84 3 74 - 94
110 100 162 104 180 18 4 94 - 114
227
EPDM 48 44 07 Profile flange gasket metric
FPM 49 44 07
Model:
• For all metric GF Flange Adaptors
• Profile Gasket with steel insert (type G-ST-P/K)
• Hardness: 70° Shore EPDM, 75° Shore FPM
• EPDM: approved acc. to DVGW W 270, KTW recommendation
• Centering on the inner diameter of the screw crown
• material steel insert: carbon steel
20 15 51 20 4 3 10 - 20
25 20 61 22 4 3 12 - 22
32 25 71 28 4 3 18 - 28
40 32 82 40 4 3 30 - 40
50 40 92 46 4 3 36 - 46
63 50 107 58 5 4 48 - 58
75 65 127 69 5 4 59 - 69
90 80 142 84 5 4 73 - 84
110 100 162 104 6 5 94 - 104
Code
1∕2 748 401 006 0.031
3∕4 105 22 73 15 4 3
1 115 28 83 15 4 3
1 1∕4 140 36 88 15 4 3
1 1∕2 150 45 98 15 4 3
2 165 58 115 18 4 3
3 200 83 146 18 4 3
4 Table E 220 109 178 18 8 3
* 4 Table D 220 109 178 18 4 3
6 285 161 235 22 8 3
48 40 10 Flat Gaskets for Full Face Flanges
Drilled to BS4504 PN10/16
Model:
• For Flange Adaptors
• Hardness approx. 65° Shore
Inch EPDM FPM kg
Code Code
1∕2748 401 006 0.031
Code Code
1 1∕4 748 401 109 749 401 109
3∕4 105 22 73 15 4 3
1 115 28 83 15 4 3
1 1∕4 140 36 100 18 4 3
1 1∕2 150 45 110 18 4 3
2 165 58 125 18 4 3
3 200 83 160 18 8 3
4 220 109 178 18 8 3
6 285 161 240 22 8 3
48 40 10 Flat Gaskets for Full Face Flanges
Drilled to ANSI B16.5 Class 150
Model:
• For Flange Adaptors
• Hardness approx. 65° Shore
Inch EPDM FPM kg kg/m
Code Code
1∕2 748 401 206 749 401 206
3∕4 105 22 70 16 4 3
1 115 28 79 16 4 3
1 1∕4 140 36 88 15 4 3
1 1∕2 150 45 98 15 4 3
2 165 58 121 19 4 3
3 200 83 152 19 4 3
4 220 109 190 19 8 3
230
50 Years of application knowledge
GF CONTAIN-IT Plus PVC-U Double Containment System
Double containment is a safe and cost
effective solution for the controlled
conveyance of aggressive media.
Fields of Application:
• Water treatment
• Chemical industry
• Power generation industry
• Food and beverage production
Product Range:
• Pipes
• Fittings
• Manual valves
• Actuated valves
PVC-U/PE100 246
Connection of inner pipe by solvent cementing
231
Outer pipes and accessories
Containment pipes PVC-U
Model:
• Material: PVC-U, Polyvinylchloride unplasticised DIN 8061
• Colour: RAL 7011 - dark-grey
• Dimension: acc. DIN 8062
• Pipe length: 5m, with plain ends
Attention:
• Pressure rating for containment pipe. For using the EPDM coupler the pres-
sure rating for containment pipe is only 1 bar.
d PN Code kg e
[mm] [mm]
50 16 161 017 110 0.809 3.7
[mm] [mm]
50 16 192 017 110 0.809 3.7
[mm] [mm]
50 16 193 017 160 0.673 4,6
[mm] [mm]
90 10 193 017 113 1.400 5,1
233
ELGEF Plus electrofusion fittings
53 91 16 Coupler
With integral pipe fixation
• PE 100 SDR 11 (ISO S5)
• 10 bar Gas / 16 bar Water
• 4 mm pin connectors
• Limited path fusion indicators
• Removable centre stop
d Code LVI kg d1 L
234
Coupler EPDM
• Connection for outer pipe
• leak tight up to 1 bar
• Not to be applied when there are axial forces
d PN Code kg d1 L
235
Outer pipes and accessories
21 91 01 Socket equal PVC-U metric
* See comments regarding PN in Georg Fischer Piping Systems Planning Fun-
damentals
d d PN Code kg z D L
236
Spacer PP-H
• To center the medium pipe within the outer pipe
• To clamp upon the medium pipe
d D1 Code kg B
237
Leak detection
Branch saddle PE100
d d1 Code LVI kg L
238
Adaptor fittings
21 91 07 Adaptor bush equal PVC-U metric R
Model:
• With solvent cement socket metric and taper male thread R
• Do not use thread sealing pastes that are harmful to PVC-U
• Install with low mechanical stress and avoid large cyclic temperature changes
d R PN d Code kg z L s
239
POLY16 Plus CLAMP SADDLES
27 62 70 654X - Blue clamp saddles with stainless steel reinforcement
ring, flat gasket and stainless steel bolts and nuts (PN16-
PN10)
• water PN16-10
• suitable for PE and PVC pipes
• material: PP
• female thread: ISO 7 (parallel)
• gasket: O-ring with flat lip (NBR)
• reinforcement ring: stainless steel AISI430
• bolts and nuts : stainless steel
• colour: blue
• B= N° of bolts
• M= bolt type
• (*) with O-ring gasket
d Rp PN B M Code kg
[mm] [inch]
* 20 1∕2 16 2 M8X40 727 627 001 0.121
[mm] [inch]
110 1 1∕2 16 6 M8X50 727 627 085 0.566
* 25 1∕2 13 49 79 58 15
* 25 3∕4 13 49 79 58 15
* 32 1∕2 14 49 79 62 20
* 32 3∕4 14 49 79 62 20
* 32 1 14 62 87 70 20
40 1∕2 21 62 86 71 20
40 3∕4 21 62 86 71 20
40 1 21 62 86 70 19
50 1∕2 21 62 86 82 20
50 3∕4 21 62 86 82 20
50 1 21 62 86 82 20
50 1 1∕4 21 62 86 82 20
63 1∕2 18 62 101 96 21
63 3∕4 24 62 101 96 21
63 1 31 62 101 96 21
63 1 1∕4 31 62 101 96 21
63 1 1∕2 31 62 101 96 21
75 1∕2 16 79 123 102 14
75 3∕4 21 79 123 104 16
75 1 27 79 123 107 19
75 1 1∕4 35 79 123 109 21
75 1 1∕2 42 79 123 109 21
75 2 53 79 123 112 24
90 1∕2 16 87 138 116 14
243
Leak detection
Ball valve type 546 PVC-U
With solvent cement spigots metric
Model:
• For easy installation and removal
• Ball seals PTFE
• Without mounting inserts
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
d DN PN kv-value EPDM kg
d D H H1 L L1 L2 L3 L4 L5 L6
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
20 50 57 27 124 77 56 130 25 32 45
244
Monitoring pipe PVC-U transparent
d Code kg L D
245
PVC-U/PE100
Connection of inner pipe by solvent ce-
menting
Elbow 90° PVC-U/PE100
d D PN PVC-U Tangit / PE PVC-U Dytex / PE kg
248
21 23 91 Ball valve type 546 PVC-U/PE100
Connections for solvent cementing with Tangit
Model:
• Manual operated
• Manual override with ratchet setting
• Pneumatic or electric actuator available separately
• Protective housing PVC-U PN6 / sealing according to inner pipe
• For easy installation and removal
d D PN EPDM FPM kg
249
21 24 01 Mechanical joint PVC-U/PE100
Connections for solvent cementing with Tangit
Model:
• Protective housing PVC-U PN6 / sealing according to inner pipe
• With union PVC-U
• For easy installation and removal
d D PN EPDM FPM kg
250
Inner pipe and connection elements PVC-U
Pipe PVC-U, grey
Series S 6.3, SDR 13.6, nominal pressure PN 16
Model:
• Material: PVC-U, Polyvinylchloride unplasticised DIN 8061
• Colour: RAL 7011 - dark-grey
• Dimension: DIN EN ISO 15493, DIN 8062
• Pipe length: 5m, with plain ends
d PN Code kg e di
252
Index
Code Page Code Page Code Page
253
Index
254
Index
161 303 034 159 161 305 699 180 161 353 023 115
161 303 035 159 161 317 009 141 161 353 024 115
161 303 036 159 161 317 010 141 161 353 025 115
161 303 037 159 161 317 012 141 161 353 026 115
161 303 038 159 161 317 024 141 161 353 027 115
161 305 300 180 161 317 025 141 161 353 302 115
161 305 336 182 161 317 027 141 161 353 303 115
161 305 337 182 161 317 039 141 161 353 304 115
161 305 338 181 161 317 040 141 161 353 305 115
161 305 339 181 161 317 042 141 161 353 306 115
161 305 349 180 161 317 054 141 161 353 307 115
161 305 350 180 161 317 055 141 161 354 002 117
161 305 386 182 161 317 057 141 161 354 003 117
161 305 387 182 161 317 069 141 161 354 004 117
161 305 388 181 161 317 070 141 161 354 005 117
161 305 389 181 161 317 072 141 161 354 006 117
161 305 399 180 161 317 508 141 161 354 007 117
161 305 400 180 161 317 523 141 161 354 022 116
161 305 436 182 161 317 538 141 161 354 023 116
161 305 437 182 161 317 553 141 161 354 024 116
161 305 438 181 161 317 568 141 161 354 025 116
161 305 439 181 161 322 150 135 161 354 026 116
161 305 449 180 161 322 199 135 161 354 027 116
161 305 450 180 161 322 200 135 161 354 302 116
161 305 486 182 161 322 249 135 161 354 303 116
161 305 487 182 161 323 401 133 161 354 304 116
161 305 488 181 161 323 402 133 161 354 305 116
161 305 489 181 161 323 411 133 161 354 306 116
161 305 499 180 161 323 412 133 161 354 307 116
161 305 500 180 161 323 421 132 161 355 002 117
161 305 536 182 161 323 422 132 161 355 003 117
161 305 537 182 161 323 431 132 161 355 004 117
161 305 538 181 161 323 432 132 161 355 005 117
161 305 539 181 161 323 441 132 161 355 006 117
161 305 549 180 161 323 442 132 161 355 007 117
161 305 550 180 161 323 451 132 161 355 022 118
161 305 586 182 161 323 452 132 161 355 023 118
161 305 587 182 161 323 501 132 161 355 024 118
161 305 588 181 161 323 502 132 161 355 025 118
161 305 589 181 161 323 511 132 161 355 026 118
161 305 599 180 161 323 512 132 161 355 027 118
161 305 600 180 161 324 150 135 161 355 202 117
161 305 636 182 161 324 199 135 161 355 203 117
161 305 637 182 161 324 200 135 161 355 204 117
161 305 638 181 161 324 249 135 161 355 205 117
161 305 639 181 161 353 002 116 161 355 206 117
161 305 649 180 161 353 003 116 161 355 207 117
161 305 650 180 161 353 004 116 161 355 522 118
161 305 686 182 161 353 005 116 161 355 523 118
161 305 687 182 161 353 006 116 161 355 524 118
161 305 688 181 161 353 007 116 161 355 525 118
161 305 689 181 161 353 022 115 161 355 526 118
255
Index
161 355 527 118 161 360 513 163 161 369 062 177
161 360 013 162 161 360 514 163 161 369 063 177
161 360 038 162 161 360 515 163 161 369 064 177
161 360 401 161 161 360 516 163 161 369 065 177
161 360 402 161 161 360 517 163 161 369 066 177
161 360 403 161 161 360 521 161 161 369 067 177
161 360 404 161 161 360 522 161 161 369 069 177
161 360 405 161 161 360 523 161 161 369 070 177
161 360 406 161 161 360 524 161 161 369 071 177
161 360 407 161 161 360 525 161 161 369 072 177
161 360 411 161 161 360 526 161 161 369 073 177
161 360 412 161 161 360 527 161 161 369 082 178
161 360 413 161 161 360 531 161 161 369 083 178
161 360 414 161 161 360 532 161 161 369 084 178
161 360 415 161 161 360 533 161 161 369 085 178
161 360 416 161 161 360 534 161 161 369 086 178
161 360 417 161 161 360 535 161 161 369 087 178
161 360 421 163 161 360 536 161 161 369 089 179
161 360 422 163 161 360 537 161 161 369 090 179
161 360 423 163 161 369 002 176 161 369 091 179
161 360 424 163 161 369 003 176 161 369 092 179
161 360 425 163 161 369 004 176 161 369 093 179
161 360 426 163 161 369 005 176 161 369 102 178
161 360 427 163 161 369 006 176 161 369 103 178
161 360 431 163 161 369 007 176 161 369 104 178
161 360 432 163 161 369 009 176 161 369 105 178
161 360 433 163 161 369 010 176 161 369 106 178
161 360 434 163 161 369 011 176 161 369 107 178
161 360 435 163 161 369 012 176 161 369 109 179
161 360 436 163 161 369 013 176 161 369 110 179
161 360 437 163 161 369 022 176 161 369 111 179
161 360 441 162 161 369 023 176 161 369 112 179
161 360 442 162 161 369 024 176 161 369 113 179
161 360 443 162 161 369 025 176 161 375 501 113
161 360 444 162 161 369 026 176 161 375 502 113
161 360 445 162 161 369 027 176 161 375 503 113
161 360 446 162 161 369 029 176 161 375 504 113
161 360 447 162 161 369 030 176 161 375 505 113
161 360 451 162 161 369 031 176 161 375 506 113
161 360 452 162 161 369 032 176 161 375 507 113
161 360 453 162 161 369 033 176 161 375 508 112
161 360 454 162 161 369 042 177 161 375 509 113
161 360 455 162 161 369 043 177 161 375 510 113
161 360 456 162 161 369 044 177 161 375 511 113
161 360 457 162 161 369 045 177 161 375 512 113
161 360 502 163 161 369 046 177 161 375 513 113
161 360 503 163 161 369 047 177 161 375 514 113
161 360 504 163 161 369 049 177 161 375 515 113
161 360 505 163 161 369 050 177 161 375 516 113
161 360 506 163 161 369 051 177 161 375 517 113
161 360 507 163 161 369 052 177 161 375 518 112
161 360 512 163 161 369 053 177 161 375 519 113
256
Index
161 375 520 113 161 486 107 182 161 514 402 138
161 375 521 114 161 486 301 145 161 514 403 138
161 375 522 114 161 486 302 145 161 514 404 138
161 375 523 114 161 486 303 145 161 514 405 138
161 375 524 114 161 486 304 145 161 514 406 138
161 375 525 114 161 486 305 145 161 514 407 138
161 375 526 114 161 486 435 106 161 514 412 138
161 375 527 114 161 486 436 106 161 514 413 138
161 375 528 114 161 486 437 106 161 514 414 138
161 375 529 114 161 486 438 106 161 514 415 138
161 375 530 114 161 486 443 106 161 514 416 138
161 375 531 114 161 486 444 106 161 514 417 138
161 375 532 114 161 486 445 106 161 514 432 138
161 375 533 114 161 486 446 106 161 514 433 138
161 375 534 114 161 486 689 105 161 514 434 138
161 375 535 114 161 486 690 105 161 514 435 138
161 375 536 114 161 486 691 105 161 514 436 138
161 375 537 114 161 486 855 145 161 514 437 138
161 375 538 114 161 486 856 145 161 514 462 138
161 375 539 114 161 486 857 145 161 514 463 138
161 375 540 114 161 486 858 145 161 514 464 138
161 375 601 112 161 486 859 145 161 514 465 138
161 375 602 112 161 490 920 107 161 514 466 138
161 375 603 112 161 490 921 107 161 514 467 138
161 375 604 112 161 514 001 137 161 514 502 136
161 375 605 112 161 514 002 137 161 514 503 136
161 375 606 112 161 514 003 137 161 514 504 136
161 375 607 112 161 514 004 137 161 514 505 136
161 375 609 112 161 514 005 137 161 514 506 136
161 375 610 112 161 514 006 137 161 514 507 136
161 375 611 112 161 514 007 137 161 514 512 136
161 375 612 112 161 514 011 137 161 514 513 136
161 375 613 112 161 514 012 137 161 514 514 136
161 375 614 112 161 514 013 137 161 514 515 136
161 375 615 112 161 514 014 137 161 514 516 136
161 375 616 112 161 514 015 137 161 514 517 136
161 375 617 112 161 514 016 137 161 514 532 136
161 375 619 112 161 514 017 137 161 514 533 136
161 375 620 112 161 514 031 137 161 514 534 136
161 483 180 217 161 514 032 137 161 514 535 136
161 486 006 145 161 514 033 137 161 514 536 136
161 486 007 145 161 514 034 137 161 514 537 136
161 486 008 145 161 514 035 137 161 514 562 136
161 486 009 145 161 514 036 137 161 514 563 136
161 486 010 145 161 514 037 137 161 514 564 136
161 486 100 182 161 514 061 137 161 514 565 136
161 486 101 182 161 514 062 137 161 514 566 136
161 486 102 182 161 514 063 137 161 514 567 136
161 486 103 182 161 514 064 137 161 515 002 139
161 486 104 182 161 514 065 137 161 515 003 139
161 486 105 182 161 514 066 137 161 515 004 139
161 486 106 182 161 514 067 137 161 515 005 139
257
Index
161 515 006 139 161 543 012 123 161 543 225 129
161 515 007 139 161 543 013 123 161 543 226 129
161 515 012 139 161 543 014 123 161 543 227 129
161 515 013 139 161 543 015 123 161 543 231 129
161 515 014 139 161 543 016 123 161 543 232 129
161 515 015 139 161 543 017 123 161 543 233 129
161 515 016 139 161 543 041 124 161 543 234 129
161 515 017 139 161 543 042 124 161 543 235 129
161 515 032 139 161 543 043 124 161 543 236 129
161 515 033 139 161 543 044 124 161 543 237 129
161 515 034 139 161 543 045 124 161 543 241 128
161 515 035 139 161 543 046 124 161 543 242 128
161 515 036 139 161 543 047 124 161 543 243 128
161 515 037 139 161 543 051 124 161 543 244 128
161 515 062 139 161 543 052 124 161 543 245 128
161 515 063 139 161 543 053 124 161 543 246 128
161 515 064 139 161 543 054 124 161 543 247 128
161 515 065 139 161 543 055 124 161 543 251 128
161 515 066 139 161 543 056 124 161 543 252 128
161 515 067 139 161 543 057 124 161 543 253 128
161 517 002 140 161 543 061 125 161 543 254 128
161 517 003 140 161 543 062 125 161 543 255 128
161 517 004 140 161 543 063 125 161 543 256 128
161 517 005 140 161 543 064 125 161 543 257 128
161 517 006 140 161 543 065 125 161 543 261 126
161 517 007 140 161 543 066 125 161 543 262 126
161 517 012 140 161 543 067 125 161 543 263 126
161 517 013 140 161 543 071 125 161 543 264 126
161 517 014 140 161 543 072 125 161 543 265 126
161 517 015 140 161 543 073 125 161 543 266 126
161 517 016 140 161 543 074 125 161 543 267 126
161 517 017 140 161 543 075 125 161 543 271 126
161 517 032 140 161 543 076 125 161 543 272 126
161 517 033 140 161 543 077 125 161 543 273 126
161 517 034 140 161 543 201 127 161 543 274 126
161 517 035 140 161 543 202 127 161 543 275 126
161 517 036 140 161 543 203 127 161 543 276 126
161 517 037 140 161 543 204 127 161 543 277 126
161 517 062 140 161 543 205 127 161 543 401 119
161 517 063 140 161 543 206 127 161 543 402 119
161 517 064 140 161 543 207 127 161 543 403 119
161 517 065 140 161 543 211 127 161 543 404 119
161 517 066 140 161 543 212 127 161 543 405 119
161 517 067 140 161 543 213 127 161 543 406 119
161 543 001 123 161 543 214 127 161 543 407 119
161 543 002 123 161 543 215 127 161 543 411 119
161 543 003 123 161 543 216 127 161 543 412 119
161 543 004 123 161 543 217 127 161 543 413 119
161 543 005 123 161 543 221 129 161 543 414 119
161 543 006 123 161 543 222 129 161 543 415 119
161 543 007 123 161 543 223 129 161 543 416 119
161 543 011 123 161 543 224 129 161 543 417 119
258
Index
161 543 421 120 161 543 616 122 161 546 051 99
161 543 422 120 161 543 617 122 161 546 052 99
161 543 423 120 161 546 001 98 161 546 053 99
161 543 424 120 161 546 002 98 161 546 054 99
161 543 425 120 161 546 003 98 161 546 055 99
161 543 426 120 161 546 004 98 161 546 056 99
161 543 427 120 161 546 005 98 161 546 057 99
161 543 431 120 161 546 006 98 161 546 058 99
161 543 432 120 161 546 007 98 161 546 059 99
161 543 433 120 161 546 008 90 161 546 060 99
161 543 434 120 161 546 009 98 161 546 061 94
161 543 435 120 161 546 010 98 161 546 062 94
161 543 436 120 161 546 011 98 161 546 063 94
161 543 437 120 161 546 012 98 161 546 064 94
161 543 441 121 161 546 013 98 161 546 065 94
161 543 442 121 161 546 014 98 161 546 066 94
161 543 443 121 161 546 015 98 161 546 067 94
161 543 444 121 161 546 016 98 161 546 068 91
161 543 445 121 161 546 017 98 161 546 069 94
161 543 446 121 161 546 018 90 161 546 070 94
161 543 447 121 161 546 019 98 161 546 071 94
161 543 451 121 161 546 020 98 161 546 072 94
161 543 452 121 161 546 021 100 161 546 073 94
161 543 453 121 161 546 022 100 161 546 074 94
161 543 454 121 161 546 023 100 161 546 075 94
161 543 455 121 161 546 024 100 161 546 076 94
161 543 456 121 161 546 025 100 161 546 077 94
161 543 457 121 161 546 026 100 161 546 078 91
161 543 482 130 161 546 027 100 161 546 079 94
161 543 483 130 161 546 028 100 161 546 080 94
161 543 484 130 161 546 029 100 161 546 081 93
161 543 485 130 161 546 030 100 161 546 082 93
161 543 486 130 161 546 031 100 161 546 083 93
161 543 487 130 161 546 032 100 161 546 084 93
161 543 492 130 161 546 033 100 161 546 085 93
161 543 493 130 161 546 034 100 161 546 086 93
161 543 494 130 161 546 035 100 161 546 087 93
161 543 495 130 161 546 036 100 161 546 088 92
161 543 496 130 161 546 037 100 161 546 089 93
161 543 497 130 161 546 038 100 161 546 090 93
161 543 601 122 161 546 039 100 161 546 091 93
161 543 602 122 161 546 040 100 161 546 092 93
161 543 603 122 161 546 041 99 161 546 093 93
161 543 604 122 161 546 042 99 161 546 094 93
161 543 605 122 161 546 043 99 161 546 095 93
161 543 606 122 161 546 044 99 161 546 096 93
161 543 607 122 161 546 045 99 161 546 097 93
161 543 611 122 161 546 046 99 161 546 098 92
161 543 612 122 161 546 047 99 161 546 099 93
161 543 613 122 161 546 048 99 161 546 100 93
161 543 614 122 161 546 049 99 161 546 108 97
161 543 615 122 161 546 050 99 161 546 109 97
259
Index
161 546 110 97 161 546 254 91 161 546 367 103
161 546 118 97 161 546 255 91 161 546 368 103
161 546 119 97 161 546 256 91 161 546 369 103
161 546 120 97 161 546 257 91 161 546 370 103
161 546 201 90 161 546 259 91 161 546 371 103
161 546 202 90 161 546 260 91 161 546 372 103
161 546 203 90 161 546 301 104 161 546 373 103
161 546 204 90 161 546 302 104 161 546 374 103
161 546 205 90 161 546 303 104 161 546 375 103
161 546 206 90 161 546 304 104 161 546 376 103
161 546 207 90 161 546 305 104 161 546 377 103
161 546 209 90 161 546 306 104 161 546 378 103
161 546 210 90 161 546 307 104 161 546 379 103
161 546 211 90 161 546 308 104 161 546 380 103
161 546 212 90 161 546 309 104 161 546 761 95
161 546 213 90 161 546 310 104 161 546 762 95
161 546 214 90 161 546 311 104 161 546 763 95
161 546 215 90 161 546 312 104 161 546 764 95
161 546 216 90 161 546 313 104 161 546 765 95
161 546 217 90 161 546 314 104 161 546 766 95
161 546 219 90 161 546 315 104 161 546 767 95
161 546 220 90 161 546 316 104 161 546 771 95
161 546 221 92 161 546 317 104 161 546 772 95
161 546 222 92 161 546 318 104 161 546 773 95
161 546 223 92 161 546 319 104 161 546 774 95
161 546 224 92 161 546 320 104 161 546 775 95
161 546 225 92 161 546 341 102 161 546 776 95
161 546 226 92 161 546 342 102 161 546 777 95
161 546 227 92 161 546 343 102 161 546 822 96
161 546 229 92 161 546 344 102 161 546 823 96
161 546 230 92 161 546 345 102 161 546 824 96
161 546 231 92 161 546 346 102 161 546 825 96
161 546 232 92 161 546 347 102 161 546 826 96
161 546 233 92 161 546 348 102 161 546 827 96
161 546 234 92 161 546 349 102 161 546 828 96
161 546 235 92 161 546 350 102 161 546 829 96
161 546 236 92 161 546 351 102 161 546 830 96
161 546 237 92 161 546 352 102 161 546 832 96
161 546 239 92 161 546 353 102 161 546 833 96
161 546 240 92 161 546 354 102 161 546 834 96
161 546 241 91 161 546 355 102 161 546 835 96
161 546 242 91 161 546 356 102 161 546 836 96
161 546 243 91 161 546 357 102 161 546 837 96
161 546 244 91 161 546 358 102 161 546 838 96
161 546 245 91 161 546 359 102 161 546 839 96
161 546 246 91 161 546 360 102 161 546 840 96
161 546 247 91 161 546 361 103 161 561 001 166
161 546 249 91 161 546 362 103 161 561 002 166
161 546 250 91 161 546 363 103 161 561 003 166
161 546 251 91 161 546 364 103 161 561 004 166
161 546 252 91 161 546 365 103 161 561 005 166
161 546 253 91 161 546 366 103 161 561 006 166
260
Index
161 561 007 166 161 561 059 167 161 562 021 171
161 561 008 166 161 561 060 167 161 562 022 171
161 561 009 166 161 561 061 164 161 562 023 171
161 561 010 166 161 561 062 164 161 562 024 171
161 561 011 166 161 561 063 164 161 562 025 171
161 561 012 166 161 561 064 164 161 562 026 171
161 561 013 166 161 561 065 164 161 562 027 171
161 561 014 166 161 561 066 164 161 562 028 171
161 561 015 166 161 561 067 164 161 562 029 171
161 561 016 166 161 561 069 164 161 562 030 171
161 561 017 166 161 561 070 164 161 562 031 171
161 561 018 166 161 561 071 164 161 562 032 171
161 561 019 166 161 561 072 164 161 562 033 171
161 561 020 166 161 561 073 164 161 562 034 171
161 561 021 168 161 561 074 164 161 562 035 171
161 561 022 168 161 561 075 164 161 562 036 171
161 561 023 168 161 561 076 164 161 562 037 171
161 561 024 168 161 561 077 164 161 562 038 171
161 561 025 168 161 561 079 164 161 562 039 171
161 561 026 168 161 561 080 164 161 562 040 171
161 561 027 168 161 561 082 169 161 562 041 170
161 561 028 168 161 561 083 169 161 562 042 170
161 561 029 168 161 561 084 169 161 562 043 170
161 561 030 168 161 561 085 169 161 562 044 170
161 561 031 168 161 561 086 169 161 562 045 170
161 561 032 168 161 561 087 169 161 562 046 170
161 561 033 168 161 561 092 169 161 562 047 170
161 561 034 168 161 561 093 169 161 562 048 170
161 561 035 168 161 561 094 169 161 562 049 170
161 561 036 168 161 561 095 169 161 562 050 170
161 561 037 168 161 561 096 169 161 562 051 170
161 561 038 168 161 561 097 169 161 562 052 170
161 561 039 168 161 562 001 169 161 562 053 170
161 561 040 168 161 562 002 169 161 562 054 170
161 561 041 167 161 562 003 169 161 562 055 170
161 561 042 167 161 562 004 169 161 562 056 170
161 561 043 167 161 562 005 169 161 562 057 170
161 561 044 167 161 562 006 169 161 562 058 170
161 561 045 167 161 562 007 170 161 562 059 170
161 561 046 167 161 562 008 170 161 562 060 170
161 561 047 167 161 562 009 170 161 562 061 165
161 561 048 167 161 562 010 170 161 562 062 165
161 561 049 167 161 562 011 169 161 562 063 165
161 561 050 167 161 562 012 169 161 562 064 165
161 561 051 167 161 562 013 169 161 562 065 165
161 561 052 167 161 562 014 169 161 562 066 165
161 561 053 167 161 562 015 169 161 562 067 165
161 561 054 167 161 562 016 169 161 562 069 165
161 561 055 167 161 562 017 170 161 562 070 165
161 561 056 167 161 562 018 170 161 562 071 165
161 561 057 167 161 562 019 170 161 562 072 165
161 561 058 167 161 562 020 170 161 562 073 165
261
Index
161 562 074 165 161 567 067 144 161 568 065 147
161 562 075 165 161 567 068 144 161 568 066 147
161 562 076 165 161 567 069 144 161 568 067 147
161 562 077 165 161 567 070 144 161 568 068 147
161 562 079 165 161 567 071 144 161 568 102 148
161 562 080 165 161 567 072 144 161 568 103 148
161 562 082 172 161 567 802 142 161 568 104 148
161 562 083 172 161 567 803 142 161 568 105 148
161 562 084 172 161 567 804 142 161 568 106 148
161 562 085 172 161 567 805 142 161 568 107 148
161 562 086 172 161 567 806 142 161 568 108 148
161 562 087 172 161 567 807 142 161 568 122 148
161 562 092 172 161 567 808 142 161 568 123 148
161 562 093 172 161 567 809 142 161 568 124 148
161 562 094 172 161 567 810 142 161 568 125 148
161 562 095 172 161 567 811 142 161 568 126 148
161 562 096 172 161 567 812 142 161 568 127 148
161 562 097 172 161 567 822 142 161 568 128 148
161 567 002 143 161 567 823 142 161 568 142 149
161 567 003 143 161 567 824 142 161 568 143 149
161 567 004 143 161 567 825 142 161 568 144 149
161 567 005 143 161 567 826 142 161 568 145 149
161 567 006 143 161 567 827 142 161 568 146 149
161 567 007 143 161 567 828 142 161 568 147 149
161 567 008 143 161 567 829 142 161 568 148 149
161 567 009 143 161 567 830 142 161 568 162 149
161 567 010 143 161 567 831 142 161 568 163 149
161 567 022 143 161 567 832 142 161 568 164 149
161 567 023 143 161 568 002 146 161 568 165 149
161 567 024 143 161 568 003 146 161 568 166 149
161 567 025 143 161 568 004 146 161 568 167 149
161 567 026 143 161 568 005 146 161 568 168 149
161 567 027 143 161 568 006 146 161 591 001 173
161 567 028 143 161 568 007 146 161 591 002 173
161 567 029 143 161 568 008 146 161 591 003 173
161 567 030 143 161 568 022 146 161 591 004 173
161 567 042 144 161 568 023 146 161 591 005 173
161 567 043 144 161 568 024 146 161 591 006 173
161 567 044 144 161 568 025 146 161 591 007 173
161 567 045 144 161 568 026 146 161 591 008 173
161 567 046 144 161 568 027 146 161 591 009 173
161 567 047 144 161 568 028 146 161 591 010 173
161 567 048 144 161 568 042 147 161 591 011 173
161 567 049 144 161 568 043 147 161 591 012 173
161 567 050 144 161 568 044 147 161 591 013 173
161 567 051 144 161 568 045 147 161 591 014 173
161 567 052 144 161 568 046 147 161 591 015 173
161 567 062 144 161 568 047 147 161 591 016 173
161 567 063 144 161 568 048 147 161 591 017 173
161 567 064 144 161 568 062 147 161 591 018 173
161 567 065 144 161 568 063 147 161 591 019 173
161 567 066 144 161 568 064 147 161 591 020 173
262
Index
161 591 041 173 161 595 015 174 167 061 037 205
161 591 042 173 161 595 016 174 167 061 038 205
161 591 043 173 161 595 017 174 167 061 039 205
161 591 044 173 161 595 018 174 167 061 040 205
161 591 045 173 161 595 019 174 167 061 041 205
161 591 046 173 161 595 020 174 167 061 054 204
161 591 047 173 161 595 041 175 167 061 055 204
161 591 048 173 161 595 042 175 167 061 056 204
161 591 049 173 161 595 043 175 167 061 057 204
161 591 050 173 161 595 044 175 167 061 058 204
161 591 051 173 161 595 045 175 167 061 059 204
161 591 052 173 161 595 046 175 167 061 060 204
161 591 053 173 161 595 047 175 167 061 061 204
161 591 054 173 161 595 048 175 167 061 114 204
161 591 055 173 161 595 049 175 167 061 153 205
161 591 056 173 161 595 050 175 167 061 155 205
161 591 057 173 161 595 051 175 167 061 156 205
161 591 058 173 161 595 052 175 167 061 157 205
161 591 059 173 161 595 053 175 167 061 158 205
161 591 060 173 161 595 054 175 167 061 159 205
161 591 061 174 161 595 055 175 167 061 160 206
161 591 062 174 161 595 056 175 167 061 161 206
161 591 063 174 161 595 057 175 167 061 162 206
161 591 064 174 161 595 058 175 167 061 163 206
161 591 065 174 161 595 059 175 167 061 164 206
161 591 066 174 161 595 060 175 167 061 165 206
161 591 067 174 167 060 019 207 167 061 166 206
161 591 069 174 167 060 020 207 167 061 167 206
161 591 070 174 167 060 021 207 167 482 626 108
161 591 071 174 167 060 022 207 167 482 627 108
161 591 072 174 167 060 023 207 167 482 628 108
161 591 073 174 167 060 024 207 167 482 629 108
161 591 074 174 167 060 025 207 167 482 630 108
161 591 075 174 167 060 038 207 167 482 631 108
161 591 076 174 167 060 039 207 167 482 635 109
161 591 077 174 167 060 040 207 167 482 636 109
161 591 079 174 167 060 041 207 167 482 637 109
161 591 080 174 167 060 042 207 167 482 638 109
161 595 001 174 167 060 043 207 167 482 639 109
161 595 002 174 167 060 064 208 167 482 640 109
161 595 003 174 167 060 067 208 167 482 653 111
161 595 004 174 167 060 070 208 167 482 654 111
161 595 005 174 167 061 003 205 167 482 655 111
161 595 006 174 167 061 004 205 167 482 656 111
161 595 007 174 167 061 012 204 167 482 657 111
161 595 008 174 167 061 013 204 167 482 658 111
161 595 009 174 167 061 014 205 167 482 662 110
161 595 010 174 167 061 015 205 167 482 663 110
161 595 011 174 167 061 016 204 167 482 664 110
161 595 012 174 167 061 017 205 167 482 665 110
161 595 013 174 167 061 035 205 167 482 666 110
161 595 014 174 167 061 036 205 167 482 667 110
263
Index
167 482 671 110 167 484 744 131 192 017 046 36
167 482 672 110 167 484 745 131 192 017 047 36
167 482 673 110 167 484 746 131 192 017 060 36
167 482 674 110 167 484 747 131 192 017 080 36
167 482 675 110 167 484 788 131 192 017 082 35
167 482 676 110 167 484 789 131 192 017 083 35
167 482 680 108 167 484 790 131 192 017 084 35
167 482 681 108 167 484 791 131 192 017 085 35
167 482 682 108 167 484 792 131 192 017 086 35
167 482 683 108 167 484 793 131 192 017 087 36
167 482 684 108 167 484 945 131 192 017 088 36
167 482 685 108 167 484 946 131 192 017 089 36
167 484 076 105 167 484 947 131 192 017 104 35
167 484 077 105 167 484 948 131 192 017 105 35
167 484 078 105 173 061 003 206 192 017 106 35
167 484 079 105 173 061 004 206 192 017 107 35
167 484 080 105 173 061 005 206 192 017 108 35
167 484 081 105 173 061 006 206 192 017 109 35
167 484 082 105 173 061 007 206 192 017 110 35
167 484 083 105 173 061 008 206 192 017 111 35
167 484 084 105 173 061 009 206 192 305 300 180
167 484 088 105 173 061 010 206 192 305 349 180
167 484 089 105 173 061 011 206 192 305 350 180
167 484 090 105 173 061 012 206 192 305 399 180
167 484 091 105 173 061 013 206 192 305 400 180
167 484 092 105 173 061 014 206 192 305 449 180
167 484 093 105 173 061 015 206 192 305 450 180
167 484 094 105 173 061 016 206 192 305 499 180
167 484 095 105 173 061 017 206 192 305 500 180
167 484 096 105 173 061 153 206 192 305 549 180
167 484 100 105 173 061 155 206 192 305 550 180
167 484 101 105 173 061 156 206 192 305 599 180
167 484 102 105 173 061 157 206 192 305 600 180
167 484 103 105 173 061 158 206 192 305 649 180
167 484 104 105 173 061 159 206 192 305 650 180
167 484 105 105 173 061 160 206 192 305 699 180
167 484 110 107 173 061 161 206 192 306 300 181
167 484 111 107 173 061 162 206 192 306 349 181
167 484 642 131 173 061 163 206 192 306 350 181
167 484 643 131 173 061 164 206 192 306 399 181
167 484 644 131 173 061 165 207 192 306 400 181
167 484 645 131 173 061 166 207 192 306 449 181
167 484 646 131 173 061 167 207 192 306 450 181
167 484 647 131 192 017 036 36 192 306 499 181
167 484 688 131 192 017 037 36 192 306 500 181
167 484 689 131 192 017 038 36 192 306 549 181
167 484 690 131 192 017 039 36 192 306 550 181
167 484 691 131 192 017 040 36 192 306 599 181
167 484 692 131 192 017 041 36 192 306 650 181
167 484 693 131 192 017 042 36 192 306 699 181
167 484 742 131 192 017 044 36 193 017 113 233
167 484 743 131 192 017 045 36 193 017 114 233
264
Index
193 017 115 233 198 335 026 194 198 335 146 195
193 017 116 233 198 335 027 194 198 335 147 195
193 017 117 233 198 335 028 194 198 335 148 195
193 017 118 233 198 335 029 194 198 335 149 195
193 017 119 233 198 335 030 194 198 335 150 195
193 017 120 233 198 335 031 194 198 335 151 195
193 017 121 233 198 335 032 194 198 335 152 195
193 017 122 233 198 335 040 194 198 335 400 190
193 017 123 233 198 335 041 194 198 335 401 190
193 017 160 233 198 335 042 194 198 335 402 190
193 017 161 233 198 335 043 194 198 335 403 190
193 017 162 233 198 335 044 194 198 335 404 190
193 131 037 238 198 335 045 194 198 335 405 190
193 131 047 238 198 335 046 194 198 335 406 190
193 131 057 238 198 335 047 194 198 335 407 190
193 131 067 238 198 335 048 194 198 335 408 190
193 131 077 238 198 335 049 194 198 335 409 190
193 131 087 238 198 335 050 194 198 335 410 190
193 131 097 238 198 335 051 194 198 335 411 190
193 131 107 238 198 335 052 194 198 335 412 190
193 131 117 238 198 335 100 195 198 335 420 190
193 131 127 238 198 335 101 195 198 335 421 190
193 131 147 238 198 335 102 195 198 335 422 190
193 131 157 238 198 335 103 195 198 335 423 190
193 355 202 191 198 335 104 195 198 335 424 190
198 037 000 153 198 335 105 195 198 335 425 190
198 037 001 153 198 335 106 195 198 335 426 190
198 037 010 153 198 335 107 195 198 335 427 190
198 037 011 153 198 335 108 195 198 335 428 190
198 037 020 152 198 335 109 195 198 335 429 190
198 037 021 152 198 335 110 195 198 335 430 190
198 037 030 152 198 335 111 195 198 335 431 190
198 037 031 152 198 335 112 195 198 335 432 190
198 335 000 194 198 335 120 195 198 335 440 190
198 335 001 194 198 335 121 195 198 335 441 190
198 335 002 194 198 335 122 195 198 335 442 190
198 335 003 194 198 335 123 195 198 335 443 190
198 335 004 194 198 335 124 195 198 335 444 190
198 335 005 194 198 335 125 195 198 335 445 190
198 335 006 194 198 335 126 195 198 335 446 190
198 335 007 194 198 335 127 195 198 335 447 190
198 335 008 194 198 335 128 195 198 335 448 190
198 335 009 194 198 335 129 195 198 335 449 190
198 335 010 194 198 335 130 195 198 335 450 190
198 335 011 194 198 335 131 195 198 335 451 190
198 335 012 194 198 335 132 195 198 335 452 190
198 335 020 194 198 335 140 195 198 335 500 191
198 335 021 194 198 335 141 195 198 335 501 191
198 335 022 194 198 335 142 195 198 335 502 191
198 335 023 194 198 335 143 195 198 335 503 191
198 335 024 194 198 335 144 195 198 335 504 191
198 335 025 194 198 335 145 195 198 335 505 191
265
Index
198 335 506 191 198 801 885 196 198 807 017 193
198 335 507 191 198 801 886 196 198 807 018 193
198 335 508 191 198 801 887 196 198 807 019 193
198 335 509 191 198 801 888 196 198 820 900 201
198 335 510 191 198 801 889 196 198 820 901 201
198 335 511 191 198 801 890 197 198 820 902 201
198 335 512 191 198 801 891 197 198 820 903 201
198 335 520 191 198 801 892 197 198 820 904 201
198 335 521 191 198 801 893 197 198 820 905 201
198 335 523 191 198 801 894 197 198 820 906 201
198 335 524 191 198 801 895 197 198 820 907 201
198 335 525 191 198 801 896 197 198 820 908 201
198 335 526 191 198 801 897 197 198 820 909 201
198 335 527 191 198 801 898 197 198 820 910 201
198 335 528 191 198 801 899 197 198 820 911 201
198 335 529 191 198 803 310 196 198 820 912 201
198 335 530 191 198 803 311 196 198 820 913 201
198 335 531 191 198 803 312 196 198 820 914 201
198 335 532 191 198 803 313 196 198 820 915 201
198 335 540 191 198 803 314 196 198 820 916 201
198 335 541 191 198 803 315 196 198 820 918 201
198 335 542 191 198 803 316 196 198 820 919 201
198 335 543 191 198 803 317 196 198 820 920 201
198 335 544 191 198 803 318 196 198 820 921 201
198 335 545 191 198 803 319 196 198 820 950 200
198 335 546 191 198 803 320 197 198 820 951 200
198 335 547 191 198 803 321 197 198 820 952 200
198 335 548 191 198 803 322 197 198 820 953 200
198 335 549 191 198 803 323 197 198 820 954 200
198 335 550 192 198 803 324 197 198 820 955 200
198 335 551 192 198 803 325 197 198 820 956 200
198 335 552 192 198 803 326 197 198 820 957 200
198 335 960 198 198 803 327 197 198 820 958 200
198 335 961 198 198 803 328 197 198 820 959 200
198 335 962 198 198 803 329 197 198 820 960 200
198 335 963 198 198 807 000 192 198 820 961 200
198 335 964 198 198 807 001 192 198 820 962 200
198 335 965 198 198 807 002 192 198 820 963 200
198 335 966 198 198 807 003 192 198 820 964 200
198 335 967 198 198 807 004 192 198 820 965 200
198 335 968 198 198 807 005 192 198 820 966 200
198 335 969 198 198 807 006 192 198 820 968 200
198 335 991 198 198 807 007 192 198 820 969 200
198 335 992 198 198 807 008 192 198 820 970 200
198 335 993 198 198 807 009 192 198 820 971 200
198 335 994 198 198 807 010 193 198 820 980 199
198 335 995 198 198 807 011 193 198 820 981 199
198 801 880 196 198 807 012 193 198 820 982 199
198 801 881 196 198 807 013 193 198 820 983 199
198 801 882 196 198 807 014 193 198 820 984 199
198 801 883 196 198 807 015 193 198 820 985 199
198 801 884 196 198 807 016 193 198 820 986 199
266
Index
198 820 987 199 199 037 202 150 199 037 426 151
198 820 988 199 199 037 203 150 199 037 427 151
198 820 989 199 199 037 204 150 199 037 428 151
198 820 990 199 199 037 205 150 199 037 429 151
198 820 991 199 199 037 206 150 199 037 430 151
198 820 992 199 199 037 207 150 199 037 431 151
198 820 993 199 199 037 208 150 199 037 432 151
198 820 994 199 199 037 213 150 199 037 433 151
198 820 995 199 199 037 214 150 199 037 434 151
198 820 996 199 199 037 215 150 199 037 439 152
198 820 998 199 199 037 216 150 199 037 440 152
198 820 999 199 199 037 217 150 199 037 441 152
198 821 000 199 199 037 218 150 199 037 442 152
198 821 001 199 199 037 219 150 199 037 443 152
199 037 000 150 199 037 220 150 199 037 444 152
199 037 001 150 199 037 221 150 199 037 445 152
199 037 002 150 199 037 226 151 199 037 446 152
199 037 003 150 199 037 227 151 199 037 447 152
199 037 004 150 199 037 228 151 199 038 000 154
199 037 005 150 199 037 229 151 199 038 001 154
199 037 006 150 199 037 230 151 199 038 002 154
199 037 007 150 199 037 231 151 199 038 003 154
199 037 008 150 199 037 232 151 199 038 004 154
199 037 013 150 199 037 233 151 199 038 005 154
199 037 014 150 199 037 234 151 199 038 006 154
199 037 015 150 199 037 239 151 199 038 007 154
199 037 016 150 199 037 240 151 199 038 008 154
199 037 017 150 199 037 241 151 199 038 013 154
199 037 018 150 199 037 242 151 199 038 014 154
199 037 019 150 199 037 243 151 199 038 015 154
199 037 020 150 199 037 244 151 199 038 016 154
199 037 021 150 199 037 245 151 199 038 017 154
199 037 026 151 199 037 246 151 199 038 018 154
199 037 027 151 199 037 247 151 199 038 019 154
199 037 028 151 199 037 400 150 199 038 020 154
199 037 029 151 199 037 401 150 199 038 021 154
199 037 030 151 199 037 402 150 199 038 026 156
199 037 031 151 199 037 403 150 199 038 027 156
199 037 032 151 199 037 404 150 199 038 028 156
199 037 033 151 199 037 405 150 199 038 029 156
199 037 034 151 199 037 406 150 199 038 030 156
199 037 039 151 199 037 407 150 199 038 031 156
199 037 040 151 199 037 408 150 199 038 032 156
199 037 041 151 199 037 413 150 199 038 033 156
199 037 042 151 199 037 414 150 199 038 034 156
199 037 043 151 199 037 415 150 199 038 039 156
199 037 044 151 199 037 416 150 199 038 040 156
199 037 045 151 199 037 417 150 199 038 041 156
199 037 046 151 199 037 418 150 199 038 042 156
199 037 047 151 199 037 419 150 199 038 043 156
199 037 200 150 199 037 420 150 199 038 044 156
199 037 201 150 199 037 421 150 199 038 045 156
267
Index
199 038 046 156 199 038 418 155 199 041 066 186
199 038 047 156 199 038 419 155 199 041 067 186
199 038 200 154 199 038 420 155 199 041 068 186
199 038 201 154 199 038 421 155 199 041 069 186
199 038 202 154 199 038 426 156 199 041 070 186
199 038 203 154 199 038 427 156 199 041 071 186
199 038 204 154 199 038 428 156 199 041 292 189
199 038 205 154 199 038 429 156 199 041 293 189
199 038 206 155 199 038 430 156 199 041 309 188
199 038 207 155 199 038 431 156 199 041 310 188
199 038 208 155 199 038 432 156 199 041 311 188
199 038 213 154 199 038 433 156 199 041 312 188
199 038 214 154 199 038 434 156 199 041 313 188
199 038 215 154 199 038 439 156 199 041 314 188
199 038 216 154 199 038 440 156 199 041 315 188
199 038 217 154 199 038 441 156 199 041 330 187
199 038 218 154 199 038 442 157 199 041 331 187
199 038 219 155 199 038 443 157 199 041 332 187
199 038 220 155 199 038 444 157 199 041 333 187
199 038 221 155 199 038 445 157 199 041 334 187
199 038 226 156 199 038 446 157 199 041 335 187
199 038 227 156 199 038 447 157 199 041 336 187
199 038 228 156 199 041 000 189 199 041 360 187
199 038 229 156 199 041 001 189 199 041 361 187
199 038 230 156 199 041 006 189 199 041 362 187
199 038 231 156 199 041 007 189 199 041 363 187
199 038 232 156 199 041 012 186 199 041 364 187
199 038 233 156 199 041 013 186 199 041 365 187
199 038 234 156 199 041 014 186 199 041 366 187
199 038 239 156 199 041 015 186 199 041 379 188
199 038 240 156 199 041 016 186 199 041 380 188
199 038 241 156 199 041 017 186 199 041 381 188
199 038 242 156 199 041 018 186 199 041 382 188
199 038 243 156 199 041 019 186 199 041 383 188
199 038 244 156 199 041 020 186 199 041 384 188
199 038 245 156 199 041 021 186 199 041 385 188
199 038 246 156 199 041 022 186 199 041 914 187
199 038 247 156 199 041 023 186 199 041 919 187
199 038 400 155 199 041 024 186 199 041 922 188
199 038 401 155 199 041 025 186 199 041 940 187
199 038 402 155 199 041 026 186 199 041 944 188
199 038 403 155 199 041 027 186 199 041 945 188
199 038 404 155 199 041 028 186 199 041 950 188
199 038 405 155 199 041 029 186 199 041 953 188
199 038 406 155 199 041 030 186 199 041 984 187
199 038 407 155 199 041 031 186 199 041 985 187
199 038 408 155 199 041 060 186 199 041 986 187
199 038 413 155 199 041 061 186 199 041 987 188
199 038 414 155 199 041 062 186 199 041 988 188
199 038 415 155 199 041 063 186 199 041 989 188
199 038 416 155 199 041 064 186 199 041 990 188
199 038 417 155 199 041 065 186 199 041 991 188
268
Index
324 110 000 34 325 063 001 38 700 238 451 235
324 125 000 34 325 063 002 39 700 238 452 235
324 140 000 34 325 063 003 37 700 238 453 235
324 160 000 34 325 075 000 38 700 238 454 235
324 160 001 34 325 075 001 38 700 238 456 235
324 180 000 34 325 075 002 37 700 238 457 235
324 180 001 34 325 090 000 38 700 244 652 245
324 200 000 34 325 090 001 38 720 600 236 77
324 200 001 35 325 090 002 37 720 600 237 77
324 210 000 35 325 110 000 37 720 600 238 77
324 225 000 34 325 110 001 38 720 600 239 77
324 225 001 35 325 110 002 38 720 600 240 77
324 250 000 34 325 110 003 37 720 600 241 77
324 250 002 35 325 140 000 38 720 600 242 77
324 260 000 35 325 160 000 37 720 600 243 77
324 280 000 34 325 160 001 38 720 600 246 78
324 280 001 35 325 225 000 38 720 600 247 78
324 315 000 34 325 315 000 37 720 600 248 78
324 315 001 35 700 238 043 237 720 600 249 78
324 355 000 34 700 238 046 237 720 600 250 78
324 355 001 35 700 238 047 237 720 600 251 78
324 400 000 34 700 238 049 237 720 600 252 78
324 400 001 35 700 238 053 237 720 600 253 78
324 450 000 34 700 238 054 237 720 600 257 78
324 450 001 35 700 238 060 237 720 600 258 78
324 500 000 34 700 238 061 237 720 600 268 78
324 500 001 35 700 238 062 237 720 690 005 80
324 600 000 35 700 238 064 237 720 690 006 80
325 010 000 39 700 238 065 237 720 690 007 80
325 012 000 38 700 238 068 237 720 690 008 80
325 016 000 37 700 238 070 237 720 690 009 80
325 016 001 38 700 238 071 237 720 690 010 80
325 016 002 39 700 238 424 236 720 690 011 80
325 020 000 37 700 238 425 236 720 690 012 80
325 020 001 38 700 238 426 236 720 690 405 80
325 020 002 39 700 238 427 236 720 910 206 55
325 025 000 37 700 238 428 236 720 910 207 55
325 025 001 39 700 238 429 236 720 910 208 55
325 025 002 38 700 238 430 236 720 910 209 55
325 032 000 38 700 238 431 236 720 910 210 55
325 032 001 38 700 238 432 236 720 910 211 55
325 032 002 39 700 238 433 236 720 910 706 55
325 032 003 37 700 238 434 236 720 910 707 55
325 040 000 38 700 238 436 236 720 910 708 55
325 040 001 38 700 238 437 236 720 910 709 55
325 040 002 39 700 238 444 235 720 910 710 55
325 040 003 37 700 238 445 235 720 910 711 55
325 050 000 38 700 238 446 235 721 000 106 40
325 050 001 38 700 238 447 235 721 000 107 40
325 050 002 39 700 238 448 235 721 000 108 40
325 050 003 37 700 238 449 235 721 000 109 40
325 063 000 38 700 238 450 235 721 000 110 40
269
Index
270
Index
721 154 162 246 721 200 157 44 721 201 141 8
721 154 163 246 721 200 159 44 721 201 147 8
721 154 164 246 721 200 161 43 721 201 151 8
721 200 009 43 721 200 162 44 721 201 164 8
721 200 010 43 721 200 164 43 721 201 170 8
721 200 011 43 721 200 165 44 721 201 178 8
721 200 101 42 721 200 167 44 721 201 205 13
721 200 102 42 721 200 169 44 721 201 206 13
721 200 103 42 721 200 170 43 721 201 207 13
721 200 104 42 721 200 172 44 721 201 208 13
721 200 105 42 721 200 174 43 721 201 605 57
721 200 106 42 721 200 176 44 721 201 606 57
721 200 107 42 721 200 178 43 721 201 607 57
721 200 108 42 721 200 180 44 721 201 608 57
721 200 109 42 721 200 181 43 721 201 609 57
721 200 110 42 721 200 182 43 721 201 610 57
721 200 111 42 721 200 183 43 721 201 611 57
721 200 112 7 721 200 184 43 721 204 106 247
721 200 113 42 721 200 204 50 721 204 107 247
721 200 114 42 721 200 205 50 721 204 108 247
721 200 115 42 721 200 206 50 721 204 109 247
721 200 116 7 721 200 207 50 721 204 110 247
721 200 117 42 721 200 208 50 721 204 111 247
721 200 119 42 721 200 209 50 721 204 112 247
721 200 120 42 721 200 210 50 721 204 113 247
721 200 121 42 721 200 211 50 721 204 114 247
721 200 122 42 721 200 212 50 721 204 115 247
721 200 123 42 721 200 213 50 721 204 116 247
721 200 125 42 721 200 214 50 721 204 117 247
721 200 132 43 721 200 306 43 721 204 119 247
721 200 134 43 721 200 307 43 721 204 120 247
721 200 135 43 721 200 308 43 721 204 156 247
721 200 136 43 721 200 309 43 721 204 157 247
721 200 137 43 721 200 310 43 721 204 158 247
721 200 138 43 721 200 311 43 721 204 159 247
721 200 139 43 721 201 009 8 721 204 160 247
721 200 140 43 721 201 010 8 721 204 161 247
721 200 141 43 721 201 011 8 721 204 162 247
721 200 142 43 721 201 105 7 721 204 163 247
721 200 144 43 721 201 106 7 721 204 164 247
721 200 145 43 721 201 107 7 721 239 106 249
721 200 146 43 721 201 108 7 721 239 107 249
721 200 147 43 721 201 109 7 721 239 108 249
721 200 148 43 721 201 110 7 721 239 109 249
721 200 149 8 721 201 111 7 721 239 110 249
721 200 150 44 721 201 113 7 721 239 111 249
721 200 151 43 721 201 115 7 721 239 126 249
721 200 152 44 721 201 117 7 721 239 127 249
721 200 153 44 721 201 120 7 721 239 128 249
721 200 154 44 721 201 134 8 721 239 129 249
721 200 155 43 721 201 137 8 721 239 130 249
721 200 156 44 721 201 138 8 721 239 131 249
271
Index
721 239 156 249 721 250 120 44 721 510 009 65
721 239 157 249 721 250 121 44 721 510 010 65
721 239 158 249 721 251 106 8 721 510 011 65
721 239 159 249 721 251 107 8 721 510 012 65
721 239 160 249 721 251 108 8 721 510 014 65
721 239 161 249 721 251 109 8 721 510 028 65
721 239 176 249 721 251 110 8 721 510 029 65
721 239 177 249 721 251 111 8 721 510 030 65
721 239 178 249 721 251 113 8 721 510 031 65
721 239 179 249 721 251 115 8 721 510 032 65
721 239 180 249 721 300 103 45 721 510 033 65
721 239 181 249 721 300 104 45 721 510 034 65
721 240 106 250 721 300 105 45 721 510 035 65
721 240 107 250 721 300 106 45 721 510 036 65
721 240 108 250 721 300 107 45 721 510 037 65
721 240 109 250 721 300 108 45 721 510 039 65
721 240 110 250 721 300 109 45 721 510 103 64
721 240 111 250 721 300 110 45 721 510 104 64
721 240 126 250 721 300 111 45 721 510 105 64
721 240 127 250 721 300 112 9 721 510 106 64
721 240 128 250 721 300 113 45 721 510 107 64
721 240 129 250 721 300 114 45 721 510 108 64
721 240 130 250 721 301 107 9 721 510 109 64
721 240 131 250 721 301 108 9 721 510 110 64
721 240 156 250 721 301 109 9 721 510 111 64
721 240 157 250 721 301 110 9 721 510 112 22
721 240 158 250 721 301 111 9 721 510 114 64
721 240 159 250 721 500 103 73 721 510 128 64
721 240 160 250 721 500 104 73 721 510 129 64
721 240 161 250 721 500 105 73 721 510 130 64
721 240 176 250 721 500 106 73 721 510 131 64
721 240 177 250 721 500 107 73 721 510 132 64
721 240 178 250 721 500 108 73 721 510 133 64
721 240 179 250 721 500 109 73 721 510 134 64
721 240 180 250 721 500 110 73 721 510 135 64
721 240 181 250 721 500 111 73 721 510 136 64
721 250 103 44 721 500 162 73 721 510 137 22
721 250 104 44 721 500 163 73 721 510 139 64
721 250 105 44 721 500 164 73 721 510 204 67
721 250 106 44 721 500 405 74 721 510 205 67
721 250 107 44 721 500 406 74 721 510 206 67
721 250 108 44 721 500 407 74 721 510 207 67
721 250 109 44 721 500 408 74 721 510 208 67
721 250 110 44 721 500 409 74 721 510 209 68
721 250 111 44 721 500 410 74 721 510 210 68
721 250 112 8 721 500 411 74 721 510 211 68
721 250 113 44 721 510 003 65 721 510 213 65
721 250 114 44 721 510 004 65 721 510 238 65
721 250 115 44 721 510 005 65 721 510 305 65
721 250 116 8 721 510 006 65 721 510 306 65
721 250 117 44 721 510 007 65 721 510 307 65
721 250 119 44 721 510 008 65 721 510 308 65
272
Index
273
Index
721 550 910 72 721 601 109 73 721 700 520 223
721 550 911 72 721 601 110 73 721 700 521 223
721 550 912 25 721 601 111 73 721 700 522 223
721 550 913 72 721 601 113 73 721 700 523 223
721 550 957 72 721 602 005 74 721 700 524 223
721 550 958 72 721 602 006 74 721 700 525 223
721 550 967 72 721 602 007 74 721 701 006 223
721 550 968 72 721 602 008 74 721 701 007 223
721 551 405 17 721 602 009 74 721 701 008 223
721 551 406 17 721 602 010 74 721 701 009 223
721 551 506 24 721 602 011 74 721 701 010 223
721 551 507 24 721 602 012 74 721 701 011 223
721 551 508 24 721 602 013 74 721 701 013 223
721 551 509 24 721 602 014 74 721 701 015 223
721 551 510 24 721 602 655 75 721 701 017 223
721 551 511 24 721 602 656 75 721 701 106 222
721 551 513 24 721 602 657 75 721 701 107 222
721 551 906 25 721 602 658 75 721 701 108 222
721 551 907 25 721 602 659 75 721 701 109 222
721 551 908 25 721 602 660 75 721 701 110 222
721 551 909 25 721 602 661 75 721 701 111 222
721 551 910 25 721 700 005 216 721 701 113 222
721 551 911 25 721 700 006 216 721 701 115 222
721 551 913 25 721 700 007 216 721 701 117 222
721 600 004 75 721 700 008 216 721 701 206 222
721 600 005 75 721 700 009 216 721 701 207 222
721 600 006 75 721 700 010 216 721 701 208 222
721 600 007 75 721 700 011 216 721 701 209 222
721 600 008 75 721 700 012 216 721 701 210 222
721 600 009 75 721 700 013 216 721 701 211 222
721 600 010 75 721 700 014 216 721 701 213 222
721 600 011 75 721 700 015 216 721 701 214 222
721 600 012 75 721 700 016 216 721 701 215 222
721 600 013 75 721 700 019 216 721 701 217 222
721 600 014 75 721 700 020 216 721 702 206 217
721 600 112 73 721 700 021 216 721 702 207 217
721 600 113 73 721 700 136 216 721 702 208 217
721 600 305 74 721 700 137 216 721 702 209 217
721 600 306 74 721 700 138 216 721 702 210 217
721 600 307 74 721 700 139 216 721 702 211 217
721 600 654 75 721 700 140 216 721 702 212 217
721 600 655 75 721 700 506 223 721 702 213 217
721 600 656 75 721 700 507 223 721 702 214 217
721 600 657 75 721 700 508 223 721 702 216 217
721 600 658 75 721 700 509 223 721 702 217 217
721 600 659 75 721 700 510 223 721 702 220 217
721 600 660 75 721 700 511 223 721 702 306 222
721 600 661 75 721 700 512 223 721 702 307 222
721 601 105 73 721 700 513 223 721 702 308 222
721 601 106 73 721 700 514 223 721 702 309 222
721 601 107 73 721 700 516 223 721 702 310 222
721 601 108 73 721 700 517 223 721 702 311 222
274
Index
721 702 313 222 721 790 121 61 721 840 123 79
721 702 315 222 721 790 122 61 721 840 604 79
721 702 317 222 721 790 123 61 721 840 605 79
721 730 006 21 721 790 124 61 721 840 606 79
721 730 007 21 721 790 125 61 721 840 607 79
721 730 008 21 721 791 106 19 721 840 608 79
721 730 009 21 721 791 107 19 721 840 609 79
721 730 010 21 721 791 108 19 721 840 610 79
721 730 011 21 721 791 109 19 721 840 611 79
721 730 013 21 721 791 110 19 721 841 105 79
721 730 014 21 721 791 111 19 721 841 106 79
721 730 017 21 721 791 113 19 721 841 107 79
721 730 109 20 721 791 115 19 721 841 108 79
721 730 110 20 721 791 117 19 721 841 109 79
721 730 111 20 721 791 120 19 721 841 110 79
721 730 113 20 721 791 122 19 721 841 111 79
721 730 117 20 721 791 123 19 721 890 004 80
721 731 106 19 721 800 105 61 721 890 005 80
721 731 107 19 721 800 106 61 721 890 006 80
721 731 108 19 721 800 107 61 721 890 007 80
721 731 109 19 721 800 108 61 721 890 008 80
721 731 110 19 721 800 109 61 721 890 009 80
721 731 111 19 721 800 110 61 721 890 010 80
721 731 113 19 721 810 105 62 721 890 011 80
721 731 114 19 721 810 106 62 721 890 012 80
721 731 117 19 721 810 107 62 721 890 013 80
721 732 106 20 721 810 108 62 721 890 014 80
721 732 107 20 721 810 109 62 721 890 023 80
721 732 108 20 721 810 110 62 721 900 181 47
721 732 111 20 721 810 111 62 721 900 300 47
721 732 113 20 721 810 112 62 721 900 301 47
721 732 114 20 721 810 113 62 721 900 302 47
721 740 106 62 721 810 114 62 721 900 303 47
721 740 107 62 721 810 115 62 721 900 304 48
721 740 108 62 721 810 116 62 721 900 305 48
721 740 109 63 721 810 117 62 721 900 306 48
721 740 110 63 721 810 119 62 721 900 307 48
721 740 111 63 721 810 120 62 721 900 308 48
721 740 112 63 721 810 121 62 721 900 309 48
721 740 113 63 721 810 122 62 721 900 310 48
721 740 114 63 721 810 123 62 721 900 311 48
721 740 116 63 721 840 103 79 721 900 312 48
721 740 117 63 721 840 104 79 721 900 313 48
721 790 111 61 721 840 105 79 721 900 315 48
721 790 112 19 721 840 106 79 721 900 319 48
721 790 113 61 721 840 107 79 721 900 320 48
721 790 114 61 721 840 108 79 721 900 321 48
721 790 115 61 721 840 109 79 721 900 322 48
721 790 116 19 721 840 110 79 721 900 325 47
721 790 117 61 721 840 111 79 721 900 326 47
721 790 119 61 721 840 112 79 721 900 329 47
721 790 120 61 721 840 114 79 721 900 331 47
275
Index
276
Index
277
Index
278
Index
724 701 607 214 727 627 074 240 727 627 167 241
724 701 608 214 727 627 075 240 727 627 168 241
724 701 609 214 727 627 076 240 727 627 176 241
724 701 610 214 727 627 081 240 727 627 177 241
724 701 611 214 727 627 082 240 727 627 178 241
724 701 612 214 727 627 083 240 727 700 206 220
724 701 613 214 727 627 084 240 727 700 207 220
724 701 615 214 727 627 085 241 727 700 208 220
724 701 616 214 727 627 086 241 727 700 209 220
724 701 617 214 727 627 087 241 727 700 210 220
724 701 720 214 727 627 091 241 727 700 211 220
724 701 806 215 727 627 092 241 727 700 212 220
724 701 807 215 727 627 093 241 727 700 213 220
724 701 808 215 727 627 094 241 727 700 214 220
724 701 809 215 727 627 095 241 727 700 215 220
724 701 810 215 727 627 096 241 727 700 216 220
724 701 811 215 727 627 097 241 727 700 217 220
724 701 812 215 727 627 098 241 727 700 219 220
724 701 813 215 727 627 101 241 727 700 220 220
724 701 815 215 727 627 102 241 727 700 221 220
724 701 816 215 727 627 103 241 727 700 222 220
724 701 817 215 727 627 104 241 727 700 223 220
724 701 820 215 727 627 105 241 727 700 224 220
724 703 414 213 727 627 106 241 727 700 225 220
724 703 814 215 727 627 107 241 727 700 317 221
727 627 001 240 727 627 108 241 727 700 406 218
727 627 011 240 727 627 111 241 727 700 407 218
727 627 012 240 727 627 112 241 727 700 408 218
727 627 021 240 727 627 113 241 727 700 409 218
727 627 022 240 727 627 114 241 727 700 410 218
727 627 023 240 727 627 115 241 727 700 411 218
727 627 031 240 727 627 116 241 727 700 412 218
727 627 032 240 727 627 117 241 727 700 413 218
727 627 033 240 727 627 118 241 727 700 414 218
727 627 041 240 727 627 123 241 727 700 416 218
727 627 042 240 727 627 124 241 727 700 417 218
727 627 043 240 727 627 125 241 727 700 419 218
727 627 044 240 727 627 126 241 727 700 420 218
727 627 051 240 727 627 127 241 727 700 421 218
727 627 052 240 727 627 128 241 727 700 422 218
727 627 053 240 727 627 135 241 727 700 423 218
727 627 054 240 727 627 136 241 727 701 206 221
727 627 055 240 727 627 137 241 727 701 207 221
727 627 061 240 727 627 138 241 727 701 208 221
727 627 062 240 727 627 145 241 727 701 209 221
727 627 063 240 727 627 146 241 727 701 210 221
727 627 064 240 727 627 147 241 727 701 211 221
727 627 065 240 727 627 148 241 727 701 212 221
727 627 066 240 727 627 156 241 727 701 313 221
727 627 071 240 727 627 157 241 727 701 314 221
727 627 072 240 727 627 158 241 727 701 319 221
727 627 073 240 727 627 166 241 727 701 320 221
279
Index
727 701 406 219 748 400 319 227 748 440 720 228
727 701 407 219 748 400 320 227 748 440 721 228
727 701 408 219 748 400 321 227 748 440 722 228
727 701 409 219 748 400 322 227 748 440 723 228
727 701 410 219 748 400 323 227 748 440 724 228
727 701 411 219 748 401 006 229 748 440 725 228
727 701 412 219 748 401 007 229 748 440 726 228
727 701 413 219 748 401 008 229 748 440 727 228
727 701 414 219 748 401 009 229 748 440 728 228
727 701 422 219 748 401 010 229 748 440 729 228
727 701 423 219 748 401 011 229 749 400 005 225
734 600 106 76 748 401 013 229 749 400 006 225
734 600 107 76 748 401 014 229 749 400 007 225
734 600 108 76 748 401 017 229 749 400 008 225
734 600 109 76 748 401 064 229 749 400 009 225
734 600 110 76 748 401 109 230 749 400 010 225
734 600 111 76 748 401 110 230 749 400 011 225
748 400 004 225 748 401 111 230 749 400 012 225
748 400 005 225 748 401 113 230 749 400 013 225
748 400 006 225 748 401 117 230 749 400 015 226
748 400 007 225 748 401 206 230 749 400 016 226
748 400 008 225 748 401 207 230 749 400 017 226
748 400 009 225 748 401 208 230 749 400 018 226
748 400 010 225 748 401 211 230 749 400 020 226
748 400 011 225 748 401 213 230 749 400 021 226
748 400 012 225 748 401 214 230 749 400 022 226
748 400 013 225 748 410 004 81 749 400 025 226
748 400 014 226 748 410 005 81 749 400 026 226
748 400 015 226 748 410 006 81 749 400 027 226
748 400 016 226 748 410 007 81 749 401 109 230
748 400 017 226 748 410 008 81 749 401 110 230
748 400 018 226 748 410 009 81 749 401 111 230
748 400 020 226 748 410 010 81 749 401 113 230
748 400 021 226 748 410 011 81 749 401 117 230
748 400 022 226 748 410 014 81 749 401 206 230
748 400 023 226 748 410 015 81 749 401 207 230
748 400 025 226 748 410 016 81 749 401 208 230
748 400 026 226 748 410 248 81 749 401 211 230
748 400 027 226 748 440 705 228 749 401 213 230
748 400 305 227 748 440 706 228 749 401 214 230
748 400 306 227 748 440 707 228 749 410 004 81
748 400 307 227 748 440 708 228 749 410 005 81
748 400 308 227 748 440 709 228 749 410 006 81
748 400 309 227 748 440 710 228 749 410 007 81
748 400 310 227 748 440 711 228 749 410 008 81
748 400 311 227 748 440 712 228 749 410 009 81
748 400 312 227 748 440 713 228 749 410 010 81
748 400 313 227 748 440 714 228 749 410 011 81
748 400 314 227 748 440 715 228 749 410 014 81
748 400 315 227 748 440 716 228 749 410 015 81
748 400 316 227 748 440 717 228 749 410 016 81
748 400 317 227 748 440 719 228 749 410 248 81
280
Index
281
Index
829704N 11 875100N 8
829738N 11 875120N 8
829740N 11 875140N 8
835005 16 875160N 8
835007 16 999 950 001 185
835010 16 999 950 002 185
835012 16 999 950 003 185
835015 16 999 950 004 185
835020 16 999 950 005 185
835030 16 999 950 006 185
835040 16 999 950 007 185
836005 14 999 950 008 185
836007 14 999 950 009 185
836010 14 999 950 010 185
836012 14 999 950 011 185
836015 14 999 950 012 185
836020 14
836030 14
836040 14
837420 10
837530 10
837532 10
837626FB 10
837628 10
837668FB 10
837670 10
837702N 10
837704N 10
837738N 10
837740N 10
847060 12
847080 12
847100 12
847120 12
847140 12
847160 12
854005 21
854007 21
854010 21
854012 21
854015 21
854020 21
854030 21
854040 21
854060 21
854080 21
854100 21
854120 21
854140N 21
854160N 21
870060 8
870080 8
282
Stockist
LITGF0745 (10.11)
© George Fischer Sales Ltd.