Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 61 views

    BK9105

    Uploaded by

    mahupita
    The BK9105 Bus Coupler connects EtherNet/IP to modular electronic terminal blocks, allowing up to 64 terminals to be connected. It supports 10/100 Mbit Ethernet and obtains its IP address automatically or via a DIP switch. The BK9105 contains a 3-port switch, allowing up to 20 couplers to be cascaded in a line topology for a maximum length of 2km. It uses EtherNet/IP, which is based on the Common Industrial Protocol (CIP) over Ethernet TCP/IP and UDP/IP.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    BK9105

    Uploaded by

    mahupita
    61 views2 pages
    The BK9105 Bus Coupler connects EtherNet/IP to modular electronic terminal blocks, allowing up to 64 terminals to be connected. It supports 10/100 Mbit Ethernet and obtains its IP address automatically or via a DIP switch. The BK9105 contains a 3-port switch, allowing up to 20 couplers to be cascaded in a line topology for a maximum length of 2km. It uses EtherNet/IP, which is based on the Common Industrial Protocol (CIP) over Ethernet TCP/IP and UDP/IP.

    Original Description:

    technical data

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The BK9105 Bus Coupler connects EtherNet/IP to modular electronic terminal blocks, allowing up to 64 terminals to be connected. It supports 10/100 Mbit Ethernet and obtains its IP address automatically or via a DIP switch. The BK9105 contains a 3-port switch, allowing up to 20 couplers to be cascaded in a line topology for a maximum length of 2km. It uses EtherNet/IP, which is based on the Common Industrial Protocol (CIP) over Ethernet TCP/IP and UDP/IP.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    61 views2 pages

    BK9105

    Uploaded by

    mahupita
    The BK9105 Bus Coupler connects EtherNet/IP to modular electronic terminal blocks, allowing up to 64 terminals to be connected. It supports 10/100 Mbit Ethernet and obtains its IP address automatically or via a DIP switch. The BK9105 contains a 3-port switch, allowing up to 20 couplers to be cascaded in a line topology for a maximum length of 2km. It uses EtherNet/IP, which is based on the Common Industrial Protocol (CIP) over Ethernet TCP/IP and UDP/IP.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    EtherNet/IP BK9105

    Power LEDs
    Link/Act
    EtherNet/IP
    K-bus
    10/100 Mbaud
    Link/Act Bus Coupler
    supply
    EtherNet/IP
    10/100 Mbaud

    Input for
    power contacts
    Address selector

    Configuration interface Power contacts

    BK9105 | EtherNet/IP Bus Coupler


    The BK9105 Bus Coupler connects EtherNet/IP with the modular, extendable electronic terminal blocks. One unit consists of one
    Bus Coupler, any number from 1 to 64 terminals (255 with K-bus extension) and one end terminal.

    The Bus Coupler recognises the terminals to which it is connected, and performs the assignment of the inputs and outputs to the words of the process
    image automatically. The BK9105 Bus Coupler supports 10 Mbit/s and 100 Mbit/s Ethernet. Connection is through normal RJ45 connectors. The IP
    address is set on the DIP switch (offset to a freely selectable start address). In networks with DHCP (a service for the allocation of the logical IP address
    to the physical node address [MAC-ID]) the Bus Coupler obtains its IP address from the DHCP server.

    The BK9105 contains a 3-port switch. Two ports operate external on RJ45 connectors and can be utilised. The I/O stations can thus be configured with a
    line topology, instead of the classic star topology. In many applications this significantly reduces the wiring effort and the cabling costs. The maximum
    distance between two couplers is 100 m. Up to 20 BK9105 Bus Couplers are cascadable, so that a maximum line length of 2 km can be achieved.

    Ethernet/IP is the Industrial Ethernet standard of ODVA (Open DeviceNet Vendor Association). Ethernet/IP is based on Ethernet TCP/IP and UDP/IP – IP
    stands for Industrial Protocol. Essentially, the CIP (Common Industrial Protocol) used in ControlNet and DeviceNet was ported to Ethernet TCP/IP and
    UDP/IP.

    System data EtherNet/IP | BK9105


    Number of I/O stations only limited by IP addresses
    Number of I/O points depending on controller
    Data transfer medium 4 x 2 twisted pair copper cable; category 3 (10 Mbaud), category 5 (100 Mbaud)
    Distance between stations 100 m between hub/switch and Bus Coupler or between Bus Coupler and Bus Coupler
    Data transfer rates 10/100 Mbaud
    Topology line or star wiring
    Cascading up to 20 BK9105 or max. line length 2 km

    Technical data BK9105


    Number of Bus Terminals 64 (255 with K-bus extension)
    Max. number of bytes fieldbus 492 byte input and 492 byte output
    Digital peripheral signals 3,936 inputs/outputs
    Analog peripheral signals 122 inputs/outputs
    Protocol EtherNet/IP
    Configuration possibility via KS2000
    Data transfer rates 10/100 Mbit/s, automatic recognition of the transmission rate
    Bus interface 2 x RJ45 (2-channel switch)
    Power supply 24 V DC (-15 %/+20 %)
    Input current 70 mA + (total K-bus current)/4, 500 mA max.
    Starting current 2.5 x continuous current
    Recommended fuse ≤ 10 A
    Current supply K-bus 1750 mA
    Power contacts max. 24 V DC/max. 10 A
    Electrical isolation 500 V (power contact/supply voltage/fieldbus)
    Weight approx. 170 g
    Operating/storage temperature -25…+60 °C/-40…+85 °C

    BECKHOFF New Automation Technology We reserve the right to make technical changes.
    Relative humidity 95 %, no condensation
    Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
    EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
    Protect. class/installation pos. IP 20/variable
    Approvals CE, UL, Ex, GL

    Accessories
    KS2000 configuration software for extended parameterisation
    Cordsets cordsets and connectors
    FC9001-0010 | FC9011 Ethernet PCI fieldbus cards

    Ordering information Description


    BK9105 EtherNet/IP Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension)
    BK9105-1000 EtherNet/IP Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension), default IP address: 192.168.1.xxx
    BK9055 EtherNet/IP “Compact” Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension)
    BK9055-1000 EtherNet/IP “Compact” Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension), default IP address:
    192.168.1.xxx
    CX8095 EtherNet/IP Embedded PC

    Further information
    EtherNet/IP EtherNet/IP solutions in IP 20 and IP 67

    BECKHOFF New Automation Technology We reserve the right to make technical changes.

    You might also like