Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Evolution Full-Tech Fe 5w-30 Eng

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

*

Very high performance Fuel Economy lubricant using ELF synthetic technology,
intended for lubricating light vehicles engines. Specially formulated to ensure
compatibility with post-treatment systems.

Most recent technology  Recommended in particular for the Diesel engines respecting the EURO IV & EURO V norms about
engines emission reduction.

Adapted to the Diesel Particulate  Particularly adapted to Renault recent vehicles equipped with Diesel Particulate Filter.
Filter

« Vigorous » driving, all times of  For all driving styles, particularly « vigorous » and high speeds.
year

Refer to the maintenance book of your vehicle to know the recommendation of the manufacturer

International specifications ACEA : C4, level of performance C3

OEMs approvals RENAULT Diesel with particulate filter (except 2.2 dCi) RN0720

Excellent engine cleanliness and  Ensures maximum engine cleanliness, thanks to very good detergent and dispersion
protection properties.Confers to the engines an excellent global wear protection, thanks to its high technology
additivation.

Protection of the Diesel Particulate  Enables, thanks to low rates of sulfur, ashes and phosphorus (low SAPs), a durability of post-treatment
Filter systems (in particular the DPF) that enables high reduction of pollutant emissions.

Reduction of the fuel consumption  Specific formulae enabling fuel economy (thanks to reduction of the friction ). 2,1 % at the M111 FE
( Fuel Economy) test of ACEA (minimum 1 %).

Increase drain intervals  Contributes to the increase of the intervals between the drains. The interval can rise up to 30 000 km.

Decrease of the oil consumption  Reduced oil consumption thanks to the use of synthetic base oils of law volatility.

Ensured performance and quality of  Ensures outstanding engine longevity, thanks to a very high oxidation resistance.
the lubricant over time

Method Units SAE Grade 5W-30


Density at 15°C ASTM D1298 kg / m³ 855

Viscosity at 40°C ASTM D445 mm2/s 72,8


2
Viscosity at 100°C ASTM D445 mm /s 12,2

Viscosity index ASTM D2270 - 165

Flash point ASTM D92 °C 240

T.B.N. ASTM D2896 mgKOH/g 7,4

CCS @ -30°C ASTM D5293 mPa.s 6 450

MRV @ -35°C ASTM D4684 mPa.s 24 850

The typical characteristics mentioned represent mean values

TOTAL LUBRIFIANTS EVOLUTION FULL-TECH FE 5W-30


562 avenue du parc de l’île Sheet updated: 04/2012
92029 Nanterre
1/1
This lubricant used in accordance with our recommendations and for the application for which it is intended does not represent a special hazard.
A safety data file conforming to the requirements of current EC legislation is available from your local trade consultant.

You might also like