Matelec 2019 Catalogue
Matelec 2019 Catalogue
Matelec 2019 Catalogue
Should you have any queries, please do not hesitate to contact our
friendly sales team on Sharecall 0860MAT
ATelec, telephone 033 346 0466
AT
0860MATelec,
or email: sales@matelec.co.za. Furthermore, you may also visit our
website on www.matelec.co.za
.matelec.co.za where the entire catalogue is available.
Y
Yours faithfully
The Matelec Team
T
Contact Us:
Tel:
Tel: +27 (0)33 346 0466 • Fax: +27 (0)33 386 7036
Share Call: 0860matelec • Email: sales@matelec.co.za
43 Pentrich Road, Pietermaritzburg, 3201
PO Box 2652, Pietermaritzburg, 3200 • www.matelec.co.za
Capetown Office:
Office:
Tel: +27 (0)21 5342985 Fax: +27 (0)21 5347132. No 3, Magnum Park
T Park,,
108 Bofors Circle, Epping 2, Cape Town
T
Vision
Matelec, a team on a mission, to provide you with quality electrical products, supported by excellent service!
Mission
Through our production, assembly and import resources we provide a benchmark customer service, through
quality, competitively priced products, with a team that reacts quickly and effectively to market trends and
customer expectations.
2019
2019
TABLE OF CONTENTS
Lighting
Lighting 1
Lamp Holders
Lamp Holders and
and Galleries
Galleries 11
Day / NightSwitches
Day-Night Switches 13
Float Switches
Float Switches 19
Electrical Accessories
Electrical Accessories &
& Hardware
Hardware 20
Switches
Switches 28
kWH Meters
kWh Meters 30
Cable Accessories
Cable Accessories 31
Lamps
Lamps 35
Sensors
Sensors 36
Fans
Fans 37
Lighting
FEATURES
• UV Stabilised Polycarbonate Lens
• Stainless Steel fixing screws & Aluminium
reflector
• Protection rating: IP65
• Suitable for indoor or outdoor installation
• Wall or ceiling mountable
• Low energy consumption
• Installation fixings included
• Lamps: LED
• LED Replacement lamps are available. The
LED lamps have a 2 year warranty.
Rated: 1000 lumen. CRI: 6500K. Rated: 20 000 hours
OPTIONAL EXTRAS
• Ergonomic Daylight Sensor
• Black trims are available LED
• Eyelid
270mm
FLU-27111 - M Centurion 2D 16W Opal with Box 12 FLU-27115 - M Centurion 2PL9 Opal with Box 12
FLU-27112 - M Centurion 2D 16W Opal no Box 15 FLU-27116 - M Centurion 2PL9 Opal no Box 15
Centurion
Mirage High Visor ES
Slimline
FEATURES
FEATURES
• UV Stabilised Polycarbonate lens
• ES Lamp Holder
• Modern slimline appearance
• Raised Visor Desiged for energy Saving
• Stainless steel fixing screw
Lamps ES
• IP54 weatherproof rating
• Aluminium Reflector
• Suitable for Indoor/outdoor installation
• Stainless Steel Screws
• Wall or ceiling mountable
• UV Stabilised Polycarbonate Lens
• Installation fixings included
• Protection rating: IP54
• Available as a PL9, 2D or LED fitting
• Available in Opal or Clear Visor
• Mirage LED has a 1000 lumen 16W cool white
• Economical design
LED module
• Black or white trim
• 265mm diameter x 60mm height
• Opal or clear lens
265mm
LED
75mm
270mm
LED 265mm
60mm
LED
265mm
IDEAL FOR
Code Description Pack Qty.
ENERGY
FLU-27157 - M Mirage ES with Opal High Visor 10
SAVING 75mm
Mirage Slimline
FEATURES
• UV Stabilised Polycarbonate lens
• Modern slimline appearance
• Stainless steel fixing screw
• IP54 weatherproof rating
• Suitable for Indoor/outdoor installation
• Wall or ceiling mountable
• Installation fixings included
• Available as a PL9, 2D or LED fitting
• Mirage LED has a 1000 lumen 16W cool white
LED module
• 265mm diameter x 60mm height
Lighting FLU-27141 - M
FLU-27142 - M
Mirage 2D 16W Clear No Box
15
LED 265mm
60mm
FLU-27143 - M Mirage 2PL9 Clear No Box 15
Lighting
Baby Emperor
Galaxy Domed
FEATURES
• UV Stabilised Polycarbonate Diffuser
•FEATURES
Modern slimline appearence
•• Opal/Clear
Raised Visolens
r Deavailable
signed for Energy Saving
• Stainless
Lamps ES steel fixing screw and aluminium reflector 270mm
•• Aluminium
Trims available in black or white
Reflector 260mm
•• Stainless
Twist off trim
SteelforScrews
easy lamp replacement
•• UV
Aluminium reflPolycarbonate
Stabilised ector Lens
•• L ED rWeatherproof
IP54 eplacement mRatingodules are available
•• Available
IP65 Waterproof
with Opal rating
Visor 70mm
270mm 112mm
•• Black
Suitable
or white trim and outdoor installaton
for indoor
260mm
•• Opal
Wall or Ceiling mountable
lens
• Low energy consumption
• Rated for continuous use
• 260mm (diameter) x 70mm (height)
Code Description Pack Qty.
FLU-27280 - M Baby Emperor 2D 16W with Opal lens 6
Lighting
FLU-27281 - M Baby Emperor 2D 16W with Clear lens 6
LED
FLU-27282 - M Baby Emperor 2 PL9 W with opal lens 6
Emperor - Slimline
Baby Emperor
FEATURES
• UV stabilised polycarbonate diffuser
•FEATURES
Modern slimline appearance
• Opal/Clear lens
UV Stabilised available
Polycarbonate Diffuser
• Stainless steel fixing
Modern slimline screw and aluminium reflector
appearence
• Opal/Clear lensin
Trims available available
black or white
• Stainless steel fixingrating
IP65 Weatherproof screw and aluminium reflector
• Trims available
Suitable in black or white
for indoor/outdoor installation 260mm
• Wall
Twistor
offceiling mountable
trim for easy lamp replacement
Aluminium
• Low energyrefl ector
consumption
• LED replacement modules are available
IP65 module:
• LED Waterproof rating
1000 Lumens, 16 Watt 230v, 30 000 hrs
70mm
Suitable (diameter)
• 305mm for indoor and outdoor
x 74mm installaton
(height)
260mm
Wall
• All or Ceiling
MATelec mountable
Emperor fittings carry a 2 year warranty
• Low energy consumption
• Rated for continuous use
• 260mm (diameter) x 70mm (height)
LED
305mm
Lighting
Emperor
Bowls - Slimline
FEATURES
• UV stabilised polycarbonate diffuser
• Modern slimline appearance
• Opal/Clear lens available
•FEATURES
Stainless steel fixing screw and aluminium reflector
•• Trims
Opal in colour in black or white
available
•• IP65
MadeWeatherproof
to fit MATelecrating
galleries
•• Suitable
Made in high quality PVC installation
for indoor/outdoor
• Available in 6” (150mm) and 8” (200mm)
• Wall or ceiling mountable
• Low energy consumption
• LED replacement modules are available
• LED module: 1000 Lumens, 16 Watt 230v, 30 000 hrs
• 305mm (diameter) x 74mm (height)
• All MATelec Emperor fittings carry a 2 year warranty
Code Description Pack Qty.
FLU-27529 - M 150mm (6”) PVC bowl only - 60W 12
305mm
305mm
Bowls
• CFL or LED lamp recommended
FEATURES
• Opal inLED
colour
• Made to fit MATelec galleries
• Made in high quality PVC y.
• Available in 6” (150mm) and 8” (200mm)
Includes Auto Daylight dimming to reduce power consumption during daylight and
partial daylight conditions.
• Technology: LED
• Product Name: Rectangular Bulkhead Dimmable 12W LED
• Mount: Wall or Ceiling
• General Application: Residential
• Housing Material: Filled Polypropylene base, Polycarbonate Lens
• Voltage: 160VAC - 240VAC
• Lamp: 12W LED Module
• Lamp Warranty: 2 Years
• Shock and Vibration Resistant: Yes
• Power Factor: 0.69
FLU-27187-M Indoor & Outdoor Light Fitting Auto Daylight Bulkhead – 12W
• Technology: LED
• Product Name: Rectangular Bulkhead 12W LED
• Mount: Wall or Ceiling
• General Application: Residential
• Housing Material: Filled Polypropylene base, Polycarbonate Lens
• Voltage: 160VAC - 240VAC
• Lamp: 12W LED Module
• Lamp Warranty: 2 Years
• Shock and Vibration Resistant: Yes
• Power Factor: 0.69
Economy Bulkhead
FEATURES
• Lampholder available in B22 or E27
• UV stabilised polycarbonate lens
• High gloss reflector
OPTIONS
• LSTH day night sensor
210mm
LSTH short
110mm day-night
sensor
107mm
LED
Wellglass Fitting
FLU-27190-M ES Slimline bulkhead for CFL & LED 20
FEATURES
• Available in BC (B22) Nylon or Porcelain lampholder
• 150mm (6”) engineered polymer gallery
• 20mm rear entry - threaded
• Rated 100w, 230v
• IP54 Weather proof rating
• Suitable for 11W CFL Energy Saver lamp
FEATURES
• Use PAR 38 lamps or LED equivalent
• Heat resistant silicon gasket
• Suitable for outdoor use
• IP54 Weatherproof rating
• Lamp holder - porcelain ES (E27)
• Secure directional locking teeth
• Multi directional
• Spike - re-inforced engineering plastic
Torches
GREAT VALUE FOR MONEY
FEATURES
• 3 LED, 3 cell torch
• Water proof
• Shock resistant rubber housing
• Carry strap
• Batteries not included
Code Description
Robust & Easy Utility LED Light (Mount, Desk and Handheld
FLU-27192-M
Gladiator Light)
• Technology: LED
• Product Name: Gladiator LED Utility Light
• Mount: Wall, Ceiling, Pole, Hanging
• Environment: IP54
• General Application: Camping, Emergency, Solar
• Housing Material: PVC End Caps and Brackets, Polycarbonate Tube Lens
• Input Voltage: 10 - 40V DC
• Lamp: 12W LED Module
• Lamp Warranty: 2 Years
• Shock and Vibration Resistant: Yes
Code Description
Regular Gallery
FEATURES
• Robust fibreglass resin construction
• Porcelain or fibreglass BC lampholder option
• Rated 100W
• Suited for standard screw neck bowls
• Available in 6” and 8”
Econo Gallery
FEATURES
• Cost effective fibreglass galleries
• Robust fibreglass resin construction
• Porcelain or fibreglass BC or ES lampholder option
• Rated - 100W
• Suited for standard screw neck bowls
PVC Gallery
FEATURES
• Polypropylene construction
• Nylon lampholder
• Rated 60W
• Suited for standard screw neck bowls
Lampholders
12
Day-Night Switches
MATelec LS20C
FEATURES ELECTRICAL SPECIFICATIONS
Voltage Range 200 - 250V
• IP56 rating Frequency 50
• ‘Fail On’ circuitry Rated Current 20A
• UV Lens Switching cycles on resistive load >200 000
• 2 Year
Y Warranty Voltage Drop after 1000c at 1800VA load <100mV
• 20mm female Light intensity for switch ON ±60 lux
conduit entry
condui Light intensity for switch OFF ±90 lux
DIMENSIONS
81 mm (w) x 87mm (h) x 77mm Ø
Code Description Pack Qty.
FSW-50060 - PL LS 20C 15amp 22
MATelec LS 10C
FEATURES ELECTRICAL SPECIFICATIONS
• 10amp Switch Rating Voltage Range 200 - 250V
• IP56 rating Frequency 50
• ‘Fail On’ circuitry Rated Current 10A
• UV Lens Switching cycles on resistive load >200 000
• 2 Year
Y Warranty Voltage Drop after 1000c at 1800VA load <100mV
• 20mm female Light intensity for switch ON ±60 lux
conduit entry Light intensity for switch OFF ±90 lux
DIMENSIONS
81 mm (w) x 87mm (h) x 77mm Ø
MATelec AR - 20C
FEATURES ELECTRICAL SPECIFICATIONS
• 20amp Switch Rating Voltage Range 200 - 250V
• IP56 rating Frequency 50
• ‘Fail On’ circuitry Rated Current 20A
• UV Lens Switching cycles on resistive load >200 000
• 1 Year Warranty Voltage Drop after 1000c at 1800VA load <100mV
• 20mm female Light intensity for switch ON ±60 lux
conduit entry Light intensity for switch OFF ±90 lux
DIMENSIONS
81 mm (w) x 87mm (h) x 77mm Ø
SS3DR
Utilises a high grade electro - magnetic relay for load switching that allows the unit to withstand the most arduous operating conditions. SS3 DR
incorporates a premium filter system that reduces manufacturing costs and delivers a corresponding price benefit. In addition, the SS3 DR includes a
predictive transfer algorithm that protects the contacts when switching, reduces wear and improves cell life.
FEATURES
• ‘Fit and forget’ design - zero maintenance
• Long life >15 year operation
• Suitable for loads up to 400W
• Ingress Protection - IP 67
• Low energy consumption <100mW, (220V – 240V)
• Low illuminance level switching to reflect instantaneous
operation of LED lanterns
• Unity switching level – 20:20 lux as standard (other ratios
available on request)
• Near unity power factor circuit design (>0.9)
• Compatible with 3pin NEMA sockets from ALL manufac-
turers – 5/7 Pin NEMA compatible versions available on
request
• Electromagnetic relay switching – suitable for high inrush
currents and low energy dissipation
• Filtered photodiode for CIE photopic performance
• Conical design to aid self-cleaning and deter perching birds
• UV stable materials
• Intrinsically surge resistant circuit (>2kV)
• Through-hole plated PCB for increased mechanical
durability
• Long life automotive grade components
• Embossed terminal markings
• LED status indicator - one flash per 10 seconds to indicate
product is running correctly. LED off continuously indicates
product fault
• Microprocessor controlled
• No minimum load
AR 20 NEMA
SWITCH FEATURES
15 Amp switch rating
IP56 enclosure
UV Stabilised Polycarbonate lens
Unique normally closed Fail-on circuitry
Fits all Nema bases
ELECTRICAL SPECIFICATIONS
Voltage Range 200-250V
Frequency 50-60 Hz
AR 20 N Switch
Rated Current 15A
Switching cycles on resistive load > 200 000
Volt drop after 1000c at 1800VA load < 100mV
Light intensity for switch ON 60 lux
Light intensity for switch OFF 90 lux
BASE FEATURES
• Manufactured from nylon
• Supplied with the gasket, lock nut and mounting bracket
• Weather cap included
• Meets international standards
• 20mm female conduit entry
FEATURES
• 20A heavy duty
• IP65
• Loop terminal provision
• Rear entry points
• ‘Fail-on’ circuitry
• Programmable version available on request
• 1 Year Warranty
• Adjustable Lux levels
ELECTRICAL SPECIFICATIONS
Supply 240V
Rated Load Resistive - 20amps
Inductive - 3600VA
Programmable
On Time Infinity All Night (Standard)
6 hours (Convenience lighting)
Code Description Pack Qty.
Switching delay Eliminates nuisance switching
FSW-50100 - PL HDAD 15 amp Square 1/5/30
LR 100
ELECTRICAL SPECIFICATIONS
Voltage Range 200 - 250V
Frequency 50
Rated Current 15A
Switching cycles on resistive load >200 000
Voltage Drop after 1000c at 1800VA load <100mV
Light intensity for switch ON ±60 lux
FEATURES Light intensity for switch OFF ±90 lux
• 15amp Switch Rating
• IP54 rating
• Compact and Discreet Code Description Pack Qty.
• ‘Fail On’ circuitry
FSW-50090 - PL LR 100 (20mm Male Entry 20
• 1 Year Warranty
• 20mm Male conduit entry
ELECTRICAL SPECIFICATIONS
Voltage Range 200 - 250V
Frequency 50
Rated Current 0.5A
Switching cycles on resistive load >200 000
Voltage Drop after 1000c at 1800VA load <100mV
Light intensity for switch ON ±60 lux
LSTH 10mm Long LSTH 10mm Short Light intensity for switch OFF ±90 lux
FEATURES
• 0.5amp Switch Rating, ideal for retrofitting to a light fitting Code Description Pack Qty.
• IP54 rating FSW-50080 - PL LSTH 0.5amp (Long) 20
• 1 Year Warranty
FSW-50070 - PL LSTH 0.5amp (Short) 20
Silicone Cabtyre
FEATURES
• Multi-core silicone rubber insulated cable
• Temperature rating -60°C to + 180°C
• Nickel coated multi stranded copper core
• 100m rolls
Kettle Cord
FEATURES
• 230V
• Complete with 600mm cord, plug and female connection
• Fits all major brands
Double Coupler
FEATURES
• 2 x 3 pin sockets
• Dimensions: 60mm x 81mm x 42mm
• 16 amp Max
• 230V
• Must be earthed
• Commonly used for extension cords
Plug Tops
FEATURES
• Made from high density polyethylene
• Colour: White
• Easy to fit
• Fits 20mm cable gland
FEATURES
• Made from high quality polymer
• Colour: White
• Easy to fit
FEATURES
• Made from high quality polymer
• Colour: White
• Easy to fit
Bell Transformer
FEATURES
• Three Voltage transformer
• Input AC 230 Volt 50 Hz
• Output
Black/Green - 1.2 amps 4 volts AC
Green/Red - 0.7 amps 8 volts AC
Black/Red - 0.65 amps 12 volts AC
FEATURES
• No wires needed
• Battery Operated (not included)
• Effective up to 25m (Direct line of sight)
Weatherproof Boxes
FEATURES
• Durable construction
• UV stabilised
• Available in 4x4 and 4x2
• Fits all plug sockets
• Slide up lid
FEATURES
• Multiple knock-out points
• Guaranteed rigidity
• Quality galvanised coating
FEATURES
• Multiple knock-out points
• Guaranteed rigidity
• White powder coated
• External Wall Box
• Rust resistant
FEATURES
• Multiple knock-out points
• Guaranteed squareness & rigidity
Junction Box EH J1
FEATURES
• Dimensions - 125 x 80 x 25mm
• Attractive slim-line 4 x 2 housing
• Six inlets through sides and base including a 20 mm punch out
for direct conduit connection
• Fits almost anywhere including on most flush mounting boxes
• Facilitates up to 20 connections using holding plate
• Supplied with cover plate screws and mini-plugs for fixing to
the wall
• Made from ABS
Junction Box EH J2
FEATURES
• Dimensions - 165 x 123 x 40mm
• Slide on double latching cover.
• Outlets through 3 x 20 mm punch out in bottom and 1 x 25 mm
in base.
• Fits almost anywhere including on most 4 x 4 flush mounting
boxes.
• Facilitates up to 30 connections capable of holding cable cores
sizes ranging from 0.7 mm through to 3 mm diam.
• Supplies with cable ties, plugs and anchors for complete fixing
• Made from ABS
Junction Box EH J3
FEATURES
• Dimensions - 64 x 44 x 28 mm
• Four inlets points.(pierce hole to cable size at inlet point with
star screwdriver)
• Facilitates up to 6 connections using holding plate.
• Supplied with cover plate screw.
• Made form ABS
Lightning Conductors
FEATURES
• 1.2 metre antenna
• 1.2 metre copper earth spike complete with clamps
• Supplied with 4 metre bare copper earth wire
Holesaws
FEATURES
• Heavy duty milled carbide cutter
• Complete with removeable arbor
• Cutter and arbors are interchangeable with other brands
• Packaged in reuseable plastic case
FTL-10105 - I 22mm 10
FTL-10106 - I 25mm 10
FTL-10107 - I 32mm 10
FTL-10108 - I 40mm 10
FTL-10109 - I 50mm 10
FTL-10110 - I 64mm 10
FTL-10111 - I 75mm 10
FEATURES
• Length: 500 metre rolls
FEATURES
• Made from virgin ABS
Wall Plugs
FEATURES
• Polypropylene
• Colour coded
• Super grip
• Rack of 10 (snap off)
FEATURES
• Rated at 230V AC • Screwed contacts
• Single pole • 10mm hole size
• Suitable for table lamps
Through Switch
FEATURES
• Rated at 250V AC • Suitable for all lamps
• Single pole • Screwed contacts
• Nylon Housing
FEATURES
• 3A 250V AC • 100mm hole size
• Push fit contact • Not for individual lights
• Not suitable for lights • Ideal for fan speed switch
FEATURES
• 6A 250V AC • Screwed contacts
• Single pole
• Surface Mounted
FEATURES
• Electro-mechanical
• Class 2 (suitable for sub-metering)
• 2 Wire
• For single phase direct metering
• Suitable for use in caravan park, units/flats or sublet property rentals
FEATURES
• Electro-mechanical meter
• Class 2 (suitable for sub-metering)
• 4 Wire
• For three phase direct metering
• Suitable for sublet industrial properties and industrial equipment metering
Cable Glands
FEATURES
• Durable plastic ABS/Polypropylene construction
• 20mm Thread
• Durable engineering polymer grommet
• Flat glands suitable for Surfix cable
Conduit Glands
FEATURES
• Durable engineering polymer grommet
• Durable plastic ABS construction
• 20mm push in
• Available in sizes No. 08 No. 1
Conduit Clips
FEATURES
• Clip - Shatterproof Polypropylene
• Nail - Zinc plated hardened steel
Saddles
FEATURES
• Available in galvanised steel and UV stable polymer
• Locally manufactured
• 5mm fixing holes
Strip Connectors
FEATURES
• 12 Pole / 2 Way
• Flexible Black / Natural Polypropylene
• Easy snap
Porcelain Connectors
FEATURES
• Glazed porcelain blocks
• For connecting wire
• 250 Volt
Porcelain Scruits Used for joining wires without the need for screwdriver and strip connector
Fluorescent Starters
2D Fluorescent
FEATURES
• 5 000 Hour life rated
• Colour temperature - 4200k
PL Fluorescent
FEATURES
• 5 000 Hour life rated
• Colour temperature - 4200k
LED Modules
FEATURES
Lumen: 1000W
Output: 16W
Input voltage: 240V
CRI: 6500K Cool white
Warranty on lamp: 2 years
FEATURES
• Flush mount
• 220 - 240 Vac 50Hz
• Adjustable Lux: 3 - 2 000 Lux
• Time Delay: Min 10 Seconds - Max 7 Minutes
• Rated Load: 1200 W (Incandescent Lamp) / 300 W (Energy Saving Lamp)
• Detection Distance: 6 Metres
• Detection Range: 360 Degrees
FEATURES
• Controls one fan only
• 230 Volt
• Surface mounted
DIMENSIONS
• 88 x 129 x 46 mm
Extractor Fans
FEATURES
• Power consumption: 24-48W
• Ideal for bathropoms
Fan Capacitor
FEATURES
• 450V AC