1/ CS_HHO_ASYNC_CTRL_SWITCH (Asynchronous Reconfigure Switch for CS HHO)

When this switch is turned on, the RNC does not put the activation time information element
(IE) in the hard handover configuration message for CS services. After receiving the message,
the UE immediately activates the configuration.

When this switch is turned off, the RNC puts the activation time IE in the hard handover
configuration message for CS services. After receiving the message, the UE activates the
configuration at the specified activation time.

2/ PS_HHO_ASYNC_CTRL_SWITCH (Asynchronous Reconfigure Switch for PS HHO)

When this switch is turned on, the RNC does not put the activation time information element
(IE) in the hard handover configuration message for PS services. After receiving the message,
the UE immediately activates the configuration.

When this switch is turned off, the RNC puts the activation time IE in the hard handover
configuration message for PS services. After receiving the message, the UE activates the
configuration at the specified activation time.

SET URRCTRLSWITCH: PROCESSSWITCH4=PHY_RECFG_REEST_SWITCH-

SET URRCTRLSWITCH: PROCESSSWITCH2=CELLUPT_RLFAILURE_SRBREESTAB_SWITCH-1,

SET URRCTRLSWITCH: PROCESSSWITCH4=RBRECFG_ENH_RL_REEST_SWITCH-1, Optimization

SET URRCTRLSWITCH: PROCESSSWITCH4=IRATHO_HOCANCEL_RL_REEST_SWITCH-1;

SET URRCTRLSWITCH: OptimizationSwitch4=RB_RLREEST_AM_TRB_RLC_REEST_SWITCH-

SET UCONNMODETIMER: T302=D1400, N302=3, T313=3, N313=D20, T314=D12,T315=D10, N315=D20;

Command for 3RA06

Process switch = INVOKE_TRACE_SWITCH::OFF

= SYS_INFO_UPDATE_FOR_IU_RST::OFF
= DRNC_DIRECT_DSCR::ON

= PTUSER_IDENTIFY_ENH_SWITCH::OFF

= RNC_SHARE_SWITCH::ON

= RNCAP_IMSI_HO_SWITCH::OFF

= TERMINAL_VERSION_DEBASE_SWITCH::OFF

= SYS_HO_OUT_CIPHER_SWITCH::OFF

= SYS_HO_CIPHER_CONFIG::ON

= BARRED_CELL_FOR_CSDOMAIN_RST::OFF

= CR2284R1_SWITCH::OFF

= CDT_MSG_FULL_TRACE::ON

= CR2284R1_COMPATIBLE_SWITCH::ON

= COMBINE_OPERATION_DRD_SWITCH::ON

= UL_INTER_PROTECT_SWITCH::OFF

= FAST_DORMANCY_SWITCH::ON

= SYS_HO_IN_CIPHER_SWITCH::OFF

= PTT_EARLY_TRANS_SWITCH_OFF::OFF

= UPLINK_MDC_ENHENCEMENT_SWITCH::OFF

= NODEB_PRIVATE_INTERFACE_SWITCH::ON

= PTT_SPEC_LI_SWITCH_OFF::OFF

= RNC_DF_2_URA_PCH_SWITCH::OFF

= FD_TAC_MATCH_SWITCH::OFF

= NONPTT_L1_FAST_SYNC_SWITCH::OFF

= URAPCH_LAYERED_PAGING_RT_SWITCH::OFF

= URAPCH_LAYERED_PAGING_NRT_SWITCH::OFF

= IDLE_LAYERED_PAGING_NRT_SWITCH::OFF

= IDLE_LAYERED_PAGING_RT_SWITCH::OFF

= INTELLIGENT_WIFI_DETECT_AND_SELECTION::OFF

= INTERRAT_LOAD_REPORT_FOR_LTE_SWITCH::OFF

= PTUSER_IDENTIFY_SWITCH::OFF
Process Control Switch 2 = LOAD_IRAT_HO_RNC_FILL_TL::OFF

= SEND_IDT_JUDGE_IU_RESET::OFF

= RNC_RBRECFG_DRD_FAIL_ROLLBACK_SWITCH::ON

= RNC_CS_QUERY_UE_IMEI_SWITCH::OFF

= RNC_PS_QUERY_UE_IMEI_SWITCH::ON

= FACH_DTCH_CONGEST_P2D::OFF

= RNC_RBSETUP_DRD_FAIL_ROLLBACK_SWITCH::ON

= PS_NOTIFYCN_NOTDOWNSIZE_SWITCH::OFF

= ASU_RSP_TIMEOUT_HANDLE_SWITCH::OFF

= RB_RECFG_USER_INACT_SWITCH::OFF

= RRC_SCRI_NORM_REL_SWITCH::OFF

= CELLUPT_RLFAILURE_SRBREESTAB_SWITCH::OFF

= CU_OVERLAP_DSCR_SWITCH::OFF

= TRB_RST_DSCR_SWITCH::OFF

= RNC_FD_SCRI_FORCE_REL_SWITCH::ON

= USRPLN_PRORATION_SHARED_ALO::OFF

= FP_IUUP_TRACE_SWITCH::ON

= RNC_PCHR_OUTPUT_CTRL_SWITCH::OFF

= DTMF_SWITCH::ON

= FAST_CS_FB_BASEDON_RIM_SWITCH::ON

= L2U_SRVCC_WITH_PS_HO_SWITCH::OFF

= ULTRA_FLASH_CSFB_SWITCH::OFF

= RNC_PS_QUERY_UE_IMEISV_SWITCH::OFF

Process Control Switch 3 = FACH_DCCH_CONG_CTRL_SWITCH::OFF

= RNC_F2D_RLC_SUSPEND_SWITCH::ON

= UM_RRCRELCMP_RLDEL_DELAY_SWITCH::OFF

= RNC_TVM_BASED_P2D_SWITCH::ON

= CS_RLFAIL_RRCSETUP_STAT_SWITCH::OFF

= PS_INACT_NOTREL_FOR_CSPS_SWITCH::OFF
 = RAB_DL_BITRATE_MOD_SWITCH::ON

= RAB_WAIT_IUUP_INIT_RESPONSE_SWITCH::OFF

= CS_CALL_DROP_DEFINITION::OFF

= PS_CALL_DROP_DEFINITION::OFF

= CCH_ABNORMOLREL_CAUSE_SWITCH::OFF

= RNC_U2U_SWITCH::OFF

= INTERRAT2U_RESUME_PS_ASAP_SWITCH::OFF

= UE_TRB_RESET_IOT_SWITCH::OFF

= CUC_CMP_NO_ACTIVE_CFN_SWITCH::OFF

= RNC_RDY_FOR_INTERRAT_COMPATIBLE_SWITCH::OFF

Process Control Switch 4 = PS_F2D_OVERLAP_CELLUPT_SWITCH::OFF

= AMR_HHO_FAIL_ROLLBACK_SWITCH::OFF

= PHY_RECFG_REEST_SWITCH::OFF

= IUR_RL_REEST_SWITCH::OFF

= RB_SETUP_RL_REEST_SWITCH::OFF

= RRC_CONN_SETUP_OPT_SWITCH::OFF

= TCP_ACK_ACCELERATOR_SWITCH::OFF

= RRC_CELLFACH_TRB_RESET_TO_F2D_SWITCH::OFF

= SEND_MSG_NULL_SWITCH::OFF

= FD_PCH_IUR_CS_OPT_SWITCH::OFF

= CELLUPT_T314_T315_TIMEOUT_OPT_SWITCH::OFF

= CS_HHO_ASYNC_CTRL_SWITCH::OFF

= PS_HHO_ASYNC_CTRL_SWITCH::OFF

= IUR_HHO_ASYNC_CTRL_SWITCH::OFF

= R8_UE_SEL_DPUE_SWITCH::OFF

= F2P_DATATRANS_OPTIMIZE_SWITCH::OFF

= IRATHO_HOCANCEL_RL_REEST_SWITCH::OFF

= TRB_RESET_RL_REEST_SWITCH::OFF

= RB_REL_RL_REEST_SWITCH::ON
 = RB_SETUP_ENHANCE_RL_REEST_SWITCH::OFF

= RAB_SETUPMOD_CNT_FIX_SWITCH::OFF

= PCH_UE_RLC_UNRECOVERABLEERROR_SWITCH::OFF

= FAST_RETURN_LTE_BY_CELL_SELECT_SWITCH::OFF

= UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH::OFF

= PHYCHRECFG_ENH_RL_REEST_SWITCH::OFF

= RBRECFG_ENH_RL_REEST_SWITCH::OFF

= SMC_STOP_RLC_SWITCH::ON

= GTP_SN_IN_RAB_REL_INIT_BY_UTRAN_SWITCH::OFF

= CMP_IU_QOS_GTP_PDU_SN_SWITCH::OFF

= DL_TRB_RESET_BUFF_SWITCH::OFF

= RRC_CELLFACH_DL_TRB_RESET_TO_F2D_SWITCH::ON

= RAB_ASS_MOD_TNL_ADDR_SUP_SWITCH::ON

Process Control Switch 5 = INTERRAT_LOAD_SINGLE_RPT_FOR_LTE_SWITCH::OFF

= INTERRAT_LOAD_REPORT_FROM_LTE_SWITCH::OFF

= UL_EVQI_SWITCH::OFF

= DL_EVQI_SWITCH::OFF

= VIDEO_RATE_ADAPTION_SWITCH::OFF

= VOIP_MANAGE_SWITCH::OFF

= DIFF_SERVICE_ON_TERMINAL_SWITCH::OFF

= APP_GRP_RES_RSV_SWITCH::ON

= RIM_ON_ECO_SWITCH::OFF

= SRBCHG_DRD_FAST_RB_SETUP_SWITCH::OFF

= SRBNOCHG_DRD_FAST_RB_SETUP_SWITCH::OFF

= FACH_RB_RECFG_FAIL_SPEC_CAUSE_SWITCH::OFF

= WBAMR_HHO_FAIL_ROLLBACK_SWITCH::OFF

Iub Private Interface Switch = RL_OpIndex_INCLUDED::OFF

= PSCRR_OpIndex_INCLUDED::OFF

Optimization Switch = PAGGING_NUM_CTRL_SWITCH::OFF

= MC_RL_RESET_SWITCH::ON

= FD_PCH_REENTERSA_FORCE_RRC_REL_SWITCH::OFF

= UE_CRC_COMPATIBLE_SWITCH::OFF

= RNC_P2D_DRD_SWITCH::OFF

= P2D_SWITCH::ON

= AMR_F2D_OVERLAP_CELLUPT_SWITCH::ON

= SRB_RESET_RL_SETUP_SWITCH::ON

= RLFAIL_RL_SETUP_SWITCH::ON

= CS_RL_SETUP_SWITCH::ON

= PS_RL_SETUP_SWITCH::ON

= UE_SRB_RESET_SWITCH::ON

= RL_RESTORE_SWITCH::OFF

= RNC_EFD_D2F_SWITCH::ON

= RNC_RB_SCRI_NOT_DROP_SWITCH::OFF

= RRC_RECONN_SWITCH::OFF

= RRC_REPEAT_PFM_SWITCH::ON

= F2D_NO_RSP_RRCREL_SWITCH::OFF

= CS_SETUP_P2D_SWITCH::ON

= SYSHO_CIPHER_IE_SWITCH::OFF

= P2P_GTPU_NOT_CFG_SWITCH::OFF

= RB_SETUP_CIPHER_TIME_ADJ_SWITCH::OFF

= CS_PRI_MOD_NOT_INT_SWITCH::OFF

= RAB_SETUP_TMSI_REALLOC_BUF_SWITCH::OFF

= IU_FAULT_REL_PS_RES_SWITCH::OFF

= RB_RECFG_RL_REEST_SWITCH::OFF

= F2P_DT_MSG_BUFFER_SWITCH::OFF

= SCRI_COMPATIBLE_SWITCH::OFF

= GTPU_ERR_IND_DEF_SWITCH::OFF
 = IUR_SRV_CELL_CHG_MACHS_RESET_SWITCH::OFF

= UL_INTEG_ALGO_COMPAT_SWITCH::OFF

Optimization Switch2 = DRNC_DCH_RCV_CELL_RESEL_MSG_DSCR_SWITCH::OFF

= MULTIRAB_ATTESTAB_DEF_SWITCH::OFF

= PCH_UE_SRB_RESET_DSCR_SWITCH::OFF

= DRNC_CELL_CODE_CONFLICT_OPT_SWITCH::OFF

= RAB_FAIL_CAUSE_SWITCH::OFF

= PSPS_SETUP_REL_DEF_SWITCH::OFF

= RRC_CON_REQ_TIMES_COMPATIBLE_SWITCH::OFF

= SECU_CU_CROSS_SWITCH::OFF

= HHO_CNT_CORRECT_SWITCH::OFF

= IRATHO_CNT_CORRECT_SWITCH::OFF

= RB_CU_CROSS_COMPATIBLE_SWITCH::OFF

= RNTI_ENH_ALLOC_AlGO_SWITCH::OFF

= DRNC_LOAD_CTRL_SWITCH::ON

= EFACH_CU_COMMON_HRNTI_SWITCH::ON

= PSCS_CALLDROP_FIX_SWITCH::ON

= CSABNREL_DUETO_PSREL_FIX_SWITCH::ON

Function Switch = RRC_CONN_STATE_TO_NODEB_SWITCH::ON

= CS_SECMODE_PRI_CSPS_SWITCH::ON

= AMR_SILENT_DETECT_SWITCH::ON

= IU_FLEX_CONG_DISCARD_SWITCH::OFF

= UL_INTEG_ALGO_FOR_CELLUPDATE_SWITCH::OFF

= AMRWB_SILENT_DETECT_SWITCH::OFF

Maximum Paging Times for UEs in CELL_PCH = 5

Maximum Paging Times for UEs in URA_PCH = 5

Optimization Switch3 = SYS_RELOC_OUT_SUCC_STAT_OPT_SWITCH::OFF

= RL_REEST_PS_ON_FACH_SWITCH::OFF

= CELLUPDATE_MEASUREMENT_OPT_SWITCH::OFF
 = D2F_PROCEDURE_OPTIMIZATION_SWITCH::OFF

= F2D_PROCEDURE_OPTIMIZATION_SWITCH::OFF

= FOREVER_PCH_CTRL_PLANE_SHARE_OPT::OFF

= FOREVER_PCH_USER_PLANE_SHARE_OPT::OFF

= RAB_REL_SRV_CELL_CHG_CROSS_SWITCH::OFF

= SCRIWITHCAUSE_OVERLAP_SWITCH::OFF

= P2F_CUC_REPEAT_SWITCH::OFF

= UU_ABN_REL_INFO_NOTIFY_NODEB_SWITCH::OFF

= D2F_AM_PROCEDURE_OPTIMIZATION_SWITCH::OFF

= AM_D2F_F2D_RESTMR_OPTIMIZATION_SWITCH::OFF

= D2P_DT_MSG_BUFFER_SWITCH::OFF

= CM_CODE_CONFLICT_OPT_SWITCH::OFF

= H_SERV_CELL_CHANGE_MSG_OPT_SWITCH::OFF

= FAST_HSDPA_SERV_CELL_CHANGE_SWITCH::OFF

= RLRST_ASU_SUCC_COUNTERS_CORRECT_SWITCH::OFF

= COUNT_STATE_CHG_BY_RAB_EHN_SWITCH::OFF

= RAB_RELATED_COUNTER_OPT_SWITCH::OFF

= CELLUPDATE_PROCEDURE_OPT_SWITCH::OFF

= PTT_PAGING_PRD_CRRCT_SWITCH::OFF

= RRC_REL_STATUS_RSP_RAB_ASS_REQ_SWITCH::OFF

= L2U_UP_DELAY_OPT_SWITCH::ON

= PRI_LDR_SYSHO_OUT_USE_SELECT_OPT_SWITCH::OFF

Rate of NBAMR UEs with Noise Detection in the DL = 0

Rate of WBAMR UEs with Noise Detection in the DL = 0

Improvement Switch = CONVERT_RELOC_FAIL_CAUSE_SWITCH::OFF

= DEAL_SRNS_CONTEXT_REQ_FIRST_SWITCH::OFF

= DELAY_DRNC_CODE_REL_SWITCH::OFF

= ROUT_IDT_BY_ROUTING_PARA_SWITCH::OFF

= COUNT_CS_REC_IU_REL_CMD_SWITCH::OFF
 = SEND_UE_CAP_ENQ_RELOC_CCH_SWITCH::ON

= REL_IUR_CCH_BEFORE_DSCR_SWITCH::OFF

= RELOC_CIPHER_PENDING_COMPATI_SWITCH::OFF

= COUNT_SPECIAL_RAB_ATT_SWITCH::OFF

= COUNT_STATE_CHG_BY_RAB_SWITCH::OFF

= DELAY_SEND_MEACTRL_SWITCH::OFF

= TAKE_ACTIVE_TIME_DRD_SWITCH::OFF

= CS_DISCONNECT_OPT_SWITCH::OFF

= NON_DCCC_RBRECFG_RL_REEST_SWITCH::OFF

= SMC_RL_REEST_SWITCH::OFF

= PSHO_CSFB_UE_CAP_ENQ_DELAY_SWITCH::OFF

= PAGING_OM_OPTIMIZE_SWITCH::OFF

= DEACTIVE_CELLHSPA_H2F_SWITCH::OFF

= OMIT_UE_CAP_ENQ_RELOC_DCH_SWITCH::OFF

= RAB_SETUP_CNT_CORRECT_SWITCH::ON

= FACH_DCCH_RRC_REL_NO_RSP_DELAY_USE_URNTI::ON

= FACH_CCCH_RRC_REL_NO_RSP_DELAY_USE_URNTI::OFF

= DCH_DISCARD_CELL_RESEL_CU_MSG_SWITCH::OFF

= SYS_INIT_SPU_STATE_BROADCAST_OPT_SWITCH::ON

= RB_RECFG_F2D_ISR_IC_FAIL_RRC_REL_SWITCH::OFF

= PTT_RAB_SETUP_ATT_CNT_CORRECT_SWITCH::OFF

= P2D_DRD_FAIL_BACK_RESEL_CELL_SWITCH::OFF

= TRB_RST_CU_NOT_REEST_UM_RLC_TRB_SWITCH::OFF

= ONE_CNNODE_SCCP_CONG_SEL_OTHER_SWITCH::OFF

= CSFB_UE_DELAY_RAU_SWITCH::OFF

= CSFB_UE_CS_IMEI_QUERY_DISABLE_SWITCH::OFF

Paging Type 1 Resending Times for PCH UE Release = 3

Optimization Switch4 = RB_RLREEST_AM_TRB_RLC_REEST_SWITCH::OFF

= RB_SETUP_UM_TRB_RLREEST_ADJUD_OPT_SWITCH::OFF
= DRNC_RL_REEST_OPT_SWITCH::OFF

= URA2FACH_OVERLAP_CELLUPT_PROC_SWITCH::OFF

= RB_SETUP_F2D_USE_AM_RLC_SWITCH::ON

= RB_RECFG_D2F_USE_AM_RLC_SWITCH::OFF

= RB_RECFG_F2D_USE_AM_RLC_SWITCH::ON

= RRC_UE_USER_SMOOTH_OPT_SWITCH::OFF

= TRNC_LOAD_CTRL_SWITCH::OFF

= IU_SIG_REL_PCH_PAGING_SWITCH::OFF

= CPC_OPT_FOR_RLSETUP_SWITCH::ON

= D2P_L2DEACT_FAIL_OPT_SWITCH::OFF

= EFACH_RRC_REG_CMP_SWITCH::OFF

= P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITCH::OFF

= AMRC_ON_122_AMR_HHO_ROLL_BACK_SWITCH::OFF

= RELOC_IN_RG_COMB_INDEX_ALLOC_SWITCH::OFF

= SCM_CU_CROSS_SWITCH::OFF

= DRNC_HSPA_CM_OPT_SWITCH::OFF

= IUB_TRANSID_OPT_SWITCH::OFF

= L2_ENHENCE_RECFG_OPT_SWITCH::OFF

= ASYN_RL_REEST_OPT_SWITCH::OFF

= RNC_IMSI_HO_OPT_SWITCH::OFF

= IUR_PRIQUEUE_INFO_TO_MODIFY_OPT_SWITCH::OFF

= URA_PCH_LAC_RAC_CHG_NO_PAGING_SWITCH::OFF

= PAGING_OVERLAP_CU_OPT_SWITCH::OFF

= SRVCC_RELOC_IN_USE_CS_KEY_SWITCH::ON

= SOCKET_RECEIVE_DATA_CORRECT_SWITCH::OFF

= CU_PRI_OVERLAP_OTHER_PROC_SWITCH::OFF

= INTERRAT2U_INTEG_PROTECT_OPT_SWITCH::OFF

= INTRA_NODEB_RLCC_INIT_CAP_OPT_SWITCH::OFF

= DRNC_RL_PARA_UPT_OPT_SWITCH::ON
Relative Threshold for Allocating R8 UEs to DPUe = 5

Optimization Switch5 = U2L_RELOC_MSG_TAKE_ERAB_SWITCH::OFF

= PS_DOMAIN_REL_RAB_SETUP_SWITCH::OFF

= PCH2FACH_PS_TRAFFIC_PFM_FIX_SWITCH::OFF

= GSM_SYS_HO_IN_NO_UE_CAP_ENQ_SWITCH::OFF

= D2P_TWO_SIDE_RLC_REEST_SWITCH::OFF

= D2F_SRNS_CONTEXT_REQ_OPT_SWITCH::OFF

= DL_SIG_TRS_REQ_REL_UE_PRO_SWITCH::ON

= DSP_CAP_JUDGE_SWITCH::ON

= MPU_FC_USER_PLN_RSR_CHK_SWITCH::ON

= RB_CU_FAIL_RRC_REL_CELL_OPT_SWITCH::ON

= RB_RFG_MSG_USE_NEW_SG_SWITCH::OFF

= SRB3_SRB4_RLC_RST_RRC_REL_SWITCH::OFF

= WEAK_COV_NO_EXT_CS_RAB_SET_ACT_TM_SWITCH::OFF

= PS_0K_STATIC_RELOC_IN_CMP_SWITCH::OFF

= ADD_DRL_PS_0K_TO_8K_SWITCH::OFF

= CU_AL_RES_OPT_SWITCH::OFF

= DRNC_SERV_CELL_CHG_BUGFIX_SWITCH::OFF

= TRNC_TPC_INDEX_ALLOC_SWITCH::OFF

= IUR_ATM_TRAN_OPT_SWITCH::OFF

= RELOC_REQ_CIPHER_COMP_SWITCH::OFF

= STATIC_RELOC_FAIL_DRNC_CLR_RSR_SWITCH::OFF

= RNC_IN_POOL_IU_RESET_SWITCH::ON

= USE_EFD_WITHOUT_EFD_OFF_TAC_SWITCH::OFF

= RAB_MOD_IUPS_ADMIFAIL_GTPU_REEST_SWITCH::OFF

= PS_U2L_USER_PLANE_DELAY_OPT_SWITCH::OFF

= P2F_CU_CAUSE_CHG_OPT_SWITCH::OFF

= P2F_REDIRECT_CELLUPDT_RESEND_OPT_SWITCH::OFF

= RELOC_IN_PROCESS_OPT_SWITCH::OFF
 = CU_ROUT_OPT_SWITCH::OFF

DPUe to DPUb Processing Capability Ratio = 200

UL Integrity Protection Fail Tolerance Times = 3

Optimization Switch6 = ASU_RSP_FAIL_REL_UE::OFF

= CELL_PCH_UES_OPT_SWITCH::OFF

= DRNC_NOTICE_NODEB_SRNC_VEST_SWITCH::OFF

(Number of results = 1)

%%/*4837494*/LST UCONNMODETIMER:;%%

RETCODE = 0 Execution succeeded.

List UE Timers and Constants in Connected Mode

----------------------------------------------

Timer 302 = D2000

Constant 302 = 3

Timer 304 = D2000

Constant 304 = 3

Timer 305 = D30

Timer 307 = D30

Timer 308 = D40

Constant 308 = 1

Timer 309 = 5

Timer 312 = 6

Constant 312 = D1

Timer 313 = 3

Constant 313 = D50

Timer 314 = D12

Timer 315 = D30

Constant 315 = D1
 Timer 316 = D30

Timer 381 = D600

Constant 381 = D1

Timer 323 = D0

(Number of results = 1