CLPL 11 09

brands you trust.
Price List
CENTER LINE® Butterfly Valves
Effective September 19, 2011
INDEX
Series 200-Standard Product 2-7
Series 200-Custom Product 8-11
Replacement Parts 26-27
www.craneenergy.com
CRANE® CENTER LINE® SERIES 200 VALVES - STANDARD PRODUCT
September 19, 2011
EXAMPLE: 02 AS02135X
2" 200 Wafer Series, Epoxy Coated Cast Iron Body, 200 PSI, DI-ENP Disc, 416 SS Stem,
PTFE Bushings, EPDM liner, No Operator (Bare Stem)
1 2 3 4 5 6 7 8 9
1. Size Code 5. Disc Code

2" 02 DI - ENP (2" - 12") 2
2½" 25 316 SS 4
3" 03 DI - (14" - 48") 5
4" 04 Al Brnz. (2" - 48") 6
5" 05
6" 06
8" 08
10" 10 6. Stem/Shaft Code
12" 12
416 SS 1
14" 14
316 SS * 4
16" 16
* Standard with 316 SS disc only
18" 18
20" 20
24" 24
30" 30
7. Bushings Code
36" 36
42" 42 Bronze (36" - 48") 0
48" 48 PTFE (2" - 30") 3
2. Series/Style Code
200 Wafer (2" - 30") (A 8. Seat /Liner Code
200 Lug-Dead End (2" - 30") C Buna-N 1
200 Flanged (36" - 48") D EPDM 5
3. Body Material Code

9. Actuator Code
Epoxy Coated CI (2" - 12") S
Epoxy Coated A536 DI (2" - 12") V Handle (2" - 12") 2
Ductile Iron - A536 * 2 Gear Operator 5
* Standard for 14" - 48" Lug or Wafer No Operator X
Lockable Infinite (2" - 12") 3
Infinite (8") 4
4. Pressure Code Pneumatic Double Acting 6
Pnue. Spring Return - Fail Close 7
200 PSI (2" - 12") 0 Pneu. Spring Return - Fail Open 8
75 PSI Undercut (8" - 16") 3 Electric 9
150 PSI (14" - 48") 6
Note:
PED Certification: Series 200 valve can be supplied with PED Certification from 2" - 24" only
IMPORTANT: CRANE Co. and its subsidiaries are not responsible for the accuracy, compliance, and legality of material contained in this price list
offered in print, on the company websites, or via any external links, or third party sites. Please contact your local CRANE Energy Representative for
quotations.
POA = Price on Application Page 2

T: 936-588-8380 • F: 936-588-8381 • www.craneenergy.com CLPL-11-09
CRANE® CENTER LINE® SERIES 200 - STANDARD PRODUCT
Septemeber 19, 2011
WAFER TYPE - A126 EPOXY COATED CAST IRON BODY

Ductile Iron Disc(2), 416 SS Stem, 316 Stainless Steel Disc, 316 SS Stem,
PTFE Bushings, EPDM Liner(1) PTFE Bushings, EPDM Liner(1)
OPERATOR: NONE HANDLE GEAR OPERATOR: NONE HANDLE GEAR
FIGURE NO: AS02135X AS021352 AS021355 FIGURE NO: AS04435X AS044352 AS044355
SIZE LIST PRICE LIST PRICE LIST PRICE SIZE LIST PRICE LIST PRICE LIST PRICE
2" $132 $166 $356 2" $209 $246 $490
2.5" $150 $179 $366 2.5" $247 $254 $504
3" $166 $193 $388 3" $272 $323 $569
4" $195 $216 $437 4" $396 $422 $655
5" $251 $281 $575 5" $524 $541 $745
6" $309 $339 $544 6" $629 $665 $952
8" $415 $475 $646 8" $854 $879 $1,120
10" $733 (3) $823 10" $1,334 (3) $1,629
12" $851 (3) $1,013 12" $1,974 (3) $2,399
14" * N/A * 14" * N/A *
16" * N/A * 16" * N/A *
18" * N/A * 18" * N/A *
20" * N/A * 20" * N/A *
24" * N/A * 24" * N/A *
30" * N/A * 30" * N/A *
* For Wafer Valve sizes above 12" refer to page 5 * For Wafer Valve sizes above 12" refer to page 5
Aluminum Bronze Disc, 416 SS Stem,

PTFE Bushings, EPDM Liner(1)
OPERATOR: NONE HANDLE GEAR
FIGURE NO: AS06135X AS061352 AS061355
SIZE LIST PRICE LIST PRICE LIST PRICE
2" $157 $190 $415
2.5" $179 $215 $470
3" $221 $233 $496
4" $249 $261 $565
5" $341 $335 $599
6" $420 $405 $659
8" $616 $640 $1,182
10" $898 (3) $1,275
12" $1,451 (3) $1,690
14" * N/A *
16" * N/A * NOTES:
18" * N/A * (1) BUNA-N LINER CAN BE SUBSTITUTED FOR EPDM AT NO
EXTRA CHARGE
20" * N/A *
(2) ENP COATED DUCTILE IRON DISC
24" * N/A * (3) 10" & 12" HANDLES - SEE "SPECIAL ACCESSORIES" FOR
30" * N/A * PRICING INFORMATION
* For Wafer Valve sizes above 12" refer to page 5
IMPORTANT: CRANE Co. and its subsidiaries are not responsible for the accuracy, compliance, and legality of material contained in this price
list offered in print, on the company websites, or via any external links, or third party sites. Please contact your local CRANE Energy
Representative for quotations.

September 19, 2011
LUG TYPE DES (3) - A126 EPOXY COATED CAST IRON BODY
FIGURE NO: CS02135X(3) CS021352(3) CS021355(3) FIGURE NO: CS04435X(3) CS044352(3) CS044355(3)
2" $153 $182 $375 2" $226 $268 $456
2.5" $170 $190 $381 2.5" $246 $289 $501
3" $176 $209 $409 3" $278 $341 $565
4" $226 $247 $403 4" $388 $444 $627
5" $301 $330 $496 5" $491 $556 $780
6" $361 $391 $506 6" $647 $723 $914
8" $514 $550 $713 8" $938 $1,038 $1,171
10" $756 (4) $911 10" $1,532 (4) $1,688
12" $1,112 (4) $1,182 12" $2,379 (4) $2,354
14" * N/A * 14" * N/A *
16" * N/A * 16" * N/A *
18" * N/A * 18" * N/A *
20" * N/A * 20" * N/A *
24" * N/A * 24" * N/A *
30" * N/A * 30" * N/A *
* For Lug Valve sizes above 12" refer to page 6 * For Lug Valve sizes above 12" refer to page 6

FIGURE NO: CS06135X(3) CS061352(3) CS061355(3)
2" $180 $215 $436
2.5" $204 $235 $437
3" $228 $252 $465
4" $292 $290 $489
5" $380 $376 $572
6" $457 $449 $641
8" $670 $670 $930
10" $1,002 (4) $1,300
12" $1,472 (4) $1,750
14" * N/A *
NOTES:
16" * N/A * (1) BUNA-N LINER CAN BE SUBSTITUTED FOR EPDM AT NO
18" * N/A * EXTRA CHARGE
20" * N/A * (2) ENP COATED DUCTILE IRON DISC
(3) DEAD-END SERVICE IS STANDARD
24" * N/A * (4) 10" & 12" HANDLES - SEE "SPECIAL ACCESSORIES" FOR
30" * N/A * PRICING INFORMATION
* For Lug Valve sizes above 12" refer to page 6
quotations.

September 19, 2011
WAFER TYPE - A536 DUCTILE IRON BODY

FIGURE NO: AV02135X AV021352 AV021355 FIGURE NO: AV04435X AV044352 AV044355
2" $139 $175 $366 2" $220 $246 $490
2.5" $158 $189 $388 2.5" $261 $267 $504
3" $175 $204 $372 3" $287 $341 $569
4" $203 $228 $411 4" $375 $422 $655
5" $265 $296 $573 5" $551 $541 $745
6" $326 $357 $681 6" $629 $700 $952
8" $437 $501 $867 8" $899 $893 $1,120
10" $733 (3) $1,013 10" $1,405 (3) $1,629
12" $896 (3) $1,135 12" $2,025 (3) $2,399
FIGURE NO: A265135X A2651355 FIGURE NO: A264435X A2644355
14" $1,779 N/A $2,105 14" $3,100 N/A $3,195
16" $2,251 N/A $3,500 16" $4,820 N/A $5,100
18" $3,380 N/A $4,679 18" $6,250 N/A $6,810
20" $4,415 N/A $5,580 20" $8,105 N/A $8,756
24" $6,612 N/A $8,367 24" $13,200 N/A $14,409
30" $13,630 N/A $15,572 30" $28,000 N/A $27,532

FIGURE NO: AV06135X AV061352 AV061355
2" $165 $201 $415
2.5" $189 $227 $470
3" $233 $245 $496
4" $262 $275 $565
5" $341 $352 $599
6" $443 $427 $694
8" $648 $640 $1,244
10" $853 (3) $1,275
12" $1,451 (3) $1,690
FIGURE NO: A266135X A2661355
14" $2,860 N/A $2,860
16" $3,960 N/A $4,395 NOTES:
(1) BUNA-N LINER CAN BE SUBSTITUTED FOR EPDM AT NO
18" $5,795 N/A $5,699
EXTRA CHARGE
20" $8,062 N/A $7,155 (2) ENP COATED DUCTILE IRON DISC
24" $12,981 N/A $13,200 (3) 10" & 12" HANDLES - SEE "SPECIAL ACCESSORIES" FOR
30" $22,882 N/A $25,190 PRICING INFORMATION
quotations.

September 19, 2011
LUG TYPE DES(3) - A536 DUCTILE IRON BODY

FIGURE NO: CV02135X(3) CV021352(3) CV021355(3) FIGURE NO: CV04435X(3) CV044352(3) CV044355(3)
2" $161 $192 $375 2" $238 $283 $490
2.5" $170 $212 $389 2.5" $259 $305 $511
3" $185 $221 $421 3" $319 $359 $565
4" $238 $260 $441 4" $426 $468 $679
5" $301 $348 $505 5" $535 $586 $789
6" $380 $412 $567 6" $702 $761 $972
8" $514 $579 $776 8" $987 $1,093 $1,207
10" $756 (4) $959 10" $1,612 (4) $1,736
12" $1,112 (4) $1,390 12" $2,379 (4) $2,354
FIGURE NO: C265135X C2651355 FIGURE NO: C264435X C2644355
14" $2,300 N/A $2,100 14" $3,201 N/A $3,400
16" $3,299 N/A $3,285 16" $4,702 N/A $5,231
18" $4,000 N/A $4,798 18" $6,595 N/A $7,141
20" $5,455 N/A $5,697 20" $8,829 N/A $9,335
24" $7,980 N/A $9,244 24" $13,679 N/A $15,103
30" $15,800 N/A $16,900 30" $26,458 N/A $28,722

FIGURE NO: CV06135X(3) CV061352(3) CV061355(3)
2" $180 $227 $435
2.5" $204 $248 $460
3" $228 $266 $465
4" $308 $314 $515
5" $401 $397 $603
6" $482 $473 $675
8" $706 $706 $930
10" $1,054 (4) $1,300
12" $1,550 (4) $1,750
FIGURE NO: C266135X C2661355
14" $2,600 N/A $3,100 NOTES:
16" $4,358 N/A $4,580 (1) BUNA-N LINER CAN BE SUBSTITUTED FOR EPDM AT NO
18" $5,690 N/A $5,833 EXTRA CHARGE
(2) ENP COATED DUCTILE IRON DISC
20" $6,638 N/A $7,500
(3) DEAD-END SERVICE IS STANDARD
24" $11,625 N/A $11,829 (4) 10" & 12" HANDLES - SEE "SPECIAL ACCESSORIES" FOR
30" $26,900 N/A $27,310 PRICING INFORMATION
quotations.

September 19, 2011
DOUBLE FLANGE(2) TYPE - A536 DUCTILE IRON BODY - 150 CWP

Ductile Iron Disc, 416 SS Stem, 316 Stainless Steel Disc, 316 SS Stem,
(3) (1)
TFE Bushings , EPDM Liner TFE Bushings(3), EPDM Liner(1)
OPERATOR: NONE GEAR OPERATOR: NONE GEAR
FIGURE NO: D265135X D2651355 FIGURE NO: D264135X D2641355
SIZE LIST PRICE LIST PRICE SIZE LIST PRICE LIST PRICE
36" $21,915 $25,483 36" $47,974 $52,205
42" $31,858 $35,427 42" $65,648 $69,689
48" $38,255 $41,823 48" $85,784 $94,735

TFE Bushings(3), EPDM Liner(1)
OPERATOR: NONE GEAR
FIGURE NO: D266135X D2661355
SIZE LIST PRICE LIST PRICE NOTES:
(1) BUNA-N LINER CAN BE SUBSTITUTED FOR
36" $40,001 $48,263 EPDM AT NO EXTRA CHARGE
42" $57,353 $61,932 (2) DEAD END SERVICE NOT AVAILABLE
48" $70,037 $74,444 (3) PTFE BUSHINGS ALSO AVAILABLE
BASE VALVE OPTIONAL ADDERS
DISC OPERATOR
LEVER (Infinite
UNDERCUT (75 Position)
PSI)
SIZE LIST PRICE SIZE LIST PRICE
2" N/A 2" $75
2.5" N/A 2.5" $75
3" N/A 3" $75
4" N/A 4" $75
5" N/A 5" $90
6" N/A 6" $90
8" $24 8" $155
10" $24 10" * $250
12" $39 12" * $260
14" $56 *Gear Operators are recommended above 8".
16" $62 Use handles at your own risk.
You must combine the adder shown for the desired part to the price of the selected valve
offered in print, on the company websites, or via any external links, or third party sites. Please contact your local CRANE Energy Representative
for quotations.

CRANE® CENTER LINE® SERIES 200 - CUSTOM PRODUCT
September 19, 2011
EXAMPLE: 02 AV02135X-D
2" 200 Wafer Series, Epoxy Coated Ductile Iron Body, 200 PSI, DI-ENP Disc, 416 SS Stem, PTFE
Bushings, EPDM liner, No Operator (Bare Stem), Custom
1 2 3 4 5 6 7 8 9
1. Size Code 6. Stem/Shaft Code

2" 02 416 SS 1
2½" 25 316 SS * 4
3" 03 Monel 400 7
4" 04 17-4 PH 9
5" 05 * Standard with 316 SS disc only
6" 06
8" 08 7. Bushings Code
10" 10 Bronze 0
12" 12 PTFE 3
14" 14
16" 16 8. Seat /Liner Code
18" 18 1
Buna-N
20" 20 2
Abrasion Res. Buna-N
24" 24 3
Neoprene (Black)
30" 30 5
EPDM
36" 36
Viton (275 F°) std. phenolic backing 6
42" 42 7
Hypalon
Perx. Crd. Buna-N 8
2. Series/Style Code L
PTFE/Buna-N**
200 Wafer - 2" - 30" ( A Viton (400 F°) P
200 Lug - 2" - 30" (Standard) B EPDM (FDA) V
200 Lug - 2" - 30" DES* C White Buna-N (FDA) W
200 Flanged (36" - 42") D Potable Water EPDM D
* DES = Double Dead End Service White Buna-N B
** 2½ & 5" not available
3. Body Material Code
Epoxy Coated CI (2" - 12" Standard) S
Epoxy Coated DI - A536 (2"-12") V 9. Actuator Code
Cast Iron (14" - 30") 1 Handle 2
Ductile Iron - A536 (14" - 42" Standard) 2 Gear Operator 5
Ductile Iron - A395 (2" - 30") G No Operator X
Lockable/Infinite (2" - 6") 3
4. Pressure Code Infinite (8") 4
200 PSI (2" - 12") 0 Pneumatic Double Acting 6
75 PSI Undercut (8 - 30" ) 3 Pnue. Spring Return - Fail Close 7
125 PSI (2" - 12") PTFE liner 8 Electric 9
Gear Operator/Memory Stop G
Buried Gear w/2" Sq. Nut C
5. Disc Code 2" Nut Direct to Valve Stem D
DI - ENP (2" - 12") 2 Chain Wheel U
316 SS 4
DI - (14" - 42") 5
Al Brnz. (2" - 42") 6 10. Custom Code
Monel 400 7 Special Features D
quotations.
September 19, 2011

FIGURE NO: AV02135X-D AV021352-D AV021355-D FIGURE NO: AV04435X-D AV044352-D AV044355-D
2" $256 $284 $487 2" $356 $388 $618
2.5" $282 $308 $515 2.5" $393 $425 $653
3" $283 $309 $516 3" $444 $474 $704
4" $300 $332 $537 4" $542 $572 $804
5" $399 $433 $634 5" $689 $726 $955
6" $437 $471 $671 6" $848 $886 $1,119
8" $670 $736 $971 8" $1,123 $1,196 $1,464
10" $903 (3) $1,207 10" $1,697 (3) $2,054
12" $1,271 (3) $1,577 12" $2,518 (3) $2,890
FIGURE NO: A265135X-D A2651355-D FIGURE NO: A264435X-D A2644355-D
14" $1,946 N/A $2,297 14" $3,480 N/A $3,911
16" $2,572 N/A $3,370 16" $5,227 N/A $6,258
18" $3,641 N/A $4,450 18" $7,366 N/A $8,446
20" $5,199 N/A $6,127 20" $9,820 N/A $11,070
24" $10,001 N/A $11,688 24" $16,073 N/A $17,911
30" $17,940 N/A $20,090 30" $30,663 N/A $33,008

FIGURE NO: AV06135X-D AV061352-D AV061355-D
2" $303 $334 $571
2.5" $339 $372 $608
3" $350 $381 $616
4" $380 $413 $650
5" $515 $552 $787
6" $573 $612 $846
8" $878 $955 $1,230
10" $1,224 (3) $1,583
12" $1,848 (3) $2,215
FIGURE NO: A266135X-D A2661355-D
14" $2,916 N/A $3,351
16" $4,245 N/A $5,303 NOTES:
(1) BUNA-N LINER CAN BE SUBSTITUTED FOR EPDM AT (2) ENP COATED
18" $5,430 N/A $6,415
DUCTILE IRON DISC, 2" - 12"
20" $7,875 N/A $9,020 (3) 10" & 12" HANDLES - SEE "SPECIAL ACCESSORIES" FOR PRICING
24" $15,618 N/A $17,525 INFORMATION
30" $27,361 N/A $29,798
quotations.

September 19, 2011
LUG TYPE(3) - A536 DUCTILE IRON BODY

FIGURE NO: BV02135X-D BV021352-D BV021355-D FIGURE NO: BV04435X-D BV044352-D BV044355-D
2" $257 $285 $483 2" $366 $396 $624
2.5" $292 $319 $517 2.5" $414 $444 $673
3" $293 $323 $518 3" $464 $494 $725
4" $332 $358 $556 4" $579 $609 $844
5" $422 $455 $646 5" $725 $759 $990
6" $490 $521 $713 6" $915 $952 $1,185
8" $722 $788 $1,010 8" $1,196 $1,268 $1,540
10" $919 (4) $1,206 10" $1,733 (4) $2,090
12" $1,268 (4) $1,553 12" $2,542 (4) $2,913
FIGURE NO: B265135X-D B2651355-D FIGURE NO: B264435X-D B2644355-D
14" $2,254 N/A $2,653 14" $3,862 N/A $4,298
16" $3,038 N/A $3,902 16" $5,001 N/A $5,942
18" $3,845 N/A $4,729 18" $6,938 N/A $7,917
20" $5,629 N/A $6,670 20" $9,429 N/A $10,570
24" $11,193 N/A $12,879 24" $17,372 N/A $19,209
30" $20,304 N/A $22,458 30" $33,241 N/A $35,586

FIGURE NO: BV06135X-D BV061352-D BV061355-D
2" $309 $343 $579
2.5" $360 $392 $628
3" $370 $403 $638
4" $419 $453 $689
5" $552 $587 $823
6" $644 $682 $917
8" $955 $1,029 $1,306
10" $1,262 (4) $1,619 NOTES:
12" $1,871 (4) $2,243 (1) BUNA-N LINER CAN BE SUBSTITUTED FOR EPDM AT NO EXTRA
FIGURE NO: B266135X-D B2661355-D CHARGE
(2) ENP COATED DUCTILE IRON DISC 2" - 12"
14" $3,312 N/A $3,754
(3) SPECIFY IF DEAD-END SERVICE IS REQUIRED. CHANGE THE
16" $4,412 N/A $5,378 BODY DESIGNATOR FROM "B" TO "C" IN THE FIGURE NO. SEE
18" $5,743 N/A $6,733 "SPECIAL ACCESSORIES" FOR PRICING
20" $8,480 N/A $9,635 (4) 10" & 12" HANDLES - SEE "SPECIAL ACCESSORIES" FOR PRICING
INFORMATION
24" $16,963 N/A $18,872
30" $30,038 N/A $32,474
for quotations.

September 19, 2011

BODIES DISC SHAFT
316
STAINLESS
WAFER - A395 LUG - A395 WAFER - Std. LUG - Std. UNDERCUT STEEL or 17-4 MONEL
Ductile Iron (1) Ductile Iron (1) Epoxy Coated (2) Epoxy Coated (2) MONEL
(3)
(75 PSI) (7) PH
(4)
400 (4)
SIZE LIST PRICE LIST PRICE LIST PRICE LIST PRICE SIZE LIST PRICE LIST PRICE SIZE LIST PRICE LIST PRICE
2" $32 $37 N/C N/C 2" POA N/A 2" $58 POA
2.5" $36 $40 N/C N/C 2.5" POA N/A 2.5" $58 POA
3" $36 $40 N/C N/C 3" POA N/A 3" $58 POA
4" $36 $40 N/C N/C 4" POA N/A 4" $85 POA
5" $40 $44 N/C N/C 5" POA N/A 5" $96 POA
6" $40 $44 N/C N/C 6" POA N/A 6" $113 POA
8" $46 $50 N/C N/C 8" POA $82 8" $180 POA
10" $46 $50 N/C N/C 10" POA $121 10" $261 POA
12" $46 $50 N/C N/C 12" POA $177 12" $357 POA
14" $164 $189 $703 $703 14" POA $1,033 14" $431 POA
16" $232 $263 $756 $756 16" POA $1,353 16" $545 POA
18" $330 $358 $805 $805 18" POA $1,595 18" $803 POA
20" $488 $514 $857 $857 20" POA $2,229 20" $1,338 POA
24' $725 $759 $955 $955 24' POA $2,549 24' $2,081 POA
30" $1,511 $1,550 $1,257 $1,257 30" POA $2,869 30" $3,473 POA
SEAT OPERATOR
EPDM BUNA-N LEVER

NEOPRENE VITON (400 VITON (275 F° TEFLON (125 (Peroxide BUNA-N (Abrasion (Infinite
HYPALON (Black) F° Max)(5) Max)(5) PSI Max)(5) Cured, FDA) (White, FG) Resistant) Position)
SIZE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE SIZE LIST PRICE
2" POA POA POA POA POA POA POA POA 2" $67
2.5" POA POA POA POA N/A POA POA POA 2.5" $67
5" POA POA POA POA N/A POA POA POA 5" $73
10" POA POA POA POA POA POA POA POA 10"(6) $214
(6)
14" POA POA POA POA N/A POA POA POA 14" N/A
24" POA POA POA POA N/A POA POA POA 24' N/A
NOTES:
(1) MUST BE ADDED TO THE A536 PRICE
(2) THIS ADDER MUST BE COMBINED WITH THE COMPLETE VALVE ASSEMBLY CONTAINING THE SPECIFIED DISC MATERIAL
(3) ADD TO VALVE WITH IRON DISC
(4) ADD TO VALVE WITH 416 SS STEM
(5) TEFLON LINED VALVES 6" AND LARGER REQUIRE GEAR OPERATORS
(6) GEAR OPERATORS ARE RECOMMENDED FOR SIZES ABOVE 8". USERS ASSUME RESPONSIBILITY FOR 10" AND 12" HANDLES
(7) ADD TO ANY DISC MATERIAL
for quotations.

September 19, 2011
EXAMPLE: JV52135X
225 Wafer, Ductile Iron, 285 PSI, DI-ENP, 416 SS, PTFE Bushings, EPDM liner, No Operator, Custom
1 2 3 4 5 6 7 8 9

2" 02 416 SS 1
2½" 25 316 SS * 4
3" 03 Monel 400 7
4" 04 17-4 PH 9
5" 05 * Standard with 316 SS disc only
6" 06
8" 08
12" 12
PTFE (2"-24") 3
14" 14
16" 16
18" 18
8. Seat /Liner Code
20" 20
24" 24 Buna-N 1
Neoprene (Black) 3
2. Series/Style Code EPDM 5
Viton (275 F°) 6
225 Wafer ( J
Hypalon 7
225 Lug K
Viton (400 F°) P
225 Lug - DES* L
EPDM (FDA) V
225 Lug CL 300 BC (2" - 12" only) M
White Buna-N B
225 Lug CL 300 BC - DES* N
* DES = Double Dead End Service
3. Body Material Code 9. Actuator Code

Epoxy Coated DI - A536 (2" - 12") V Handle 2
Ductile Iron - A536 (14" - 30") 2 Gear Operator 5
Ductile Iron - A395 G No Operator X
200 PSI (2" - 12") DES* 0 Pneu. Spring Return - Fail Close 7
150 PSI (14" - 24") DES* 6 Electric 9
* DES Pressure Rating: 2" - 12" 200 CWP Gear Operator w/Memory Stop G
14" - 24" 150 CWP Buried Gear w/2" Sq. Nut C
2" Nut Direct to Valve Stem D
5. Disc Code Chain Wheel U
DI - ENP (2" - 12") 2
316 SS 4
DI - (14" - 24") 5
Al Brnz. (2" - 24") 6 10. Custom Code
Monel 7 Custom Product D
quotations.

September 19, 2011

FIGURE NO: JV52135X JV521352 JV521355 FIGURE NO: JV54435X JV544352 JV544355
2" $459 $487 $700 2" $609 $646 $884
2.5" $466 $496 $707 2.5" $629 $664 $903
3" $492 $523 $732 3" $713 $746 $987
4" $597 $628 $838 4" $912 $948 $1,184
5" $746 $781 $988 5" $1,130 $1,167 $1,404
6" $1,017 $1,052 $1,257 6" $1,627 $1,667 $1,902
8" $1,210 N/A $1,518 8" $1,903 N/A $2,250
10" $1,680 N/A $1,989 10" $2,785 N/A $3,133
12" $2,510 N/A $2,817 12" $3,902 N/A $4,250
FIGURE NO: J255135X J2551355 FIGURE NO: J254435X J2544355
14" $3,240 N/A $3,601 14" $6,524 N/A $6,931
16" $4,712 N/A $5,542 16" $9,024 N/A $9,968
18" $5,559 N/A $6,498 18" $10,809 N/A $11,881
20" $7,099 N/A $8,040 20" $13,833 N/A $14,897
24" $13,886 N/A $18,212 24" $23,381 N/A $28,277

FIGURE NO: JV56135X JV561352 JV561355
2" $545 $581 $824
2.5" $566 $600 $843
3" $604 $640 $883
4" $734 $769 $1,011
5" $932 $974 $1,211
6" $1,351 $1,391 $1,626
8" $1,605 N/A $1,954
10" $2,300 N/A $2,659
12" $3,627 N/A $3,979
FIGURE NO: J256135X J2561355
14" $5,543 N/A $5,954
16" $7,579 N/A $8,537 NOTES:
18" $9,399 N/A $10,483 (1) BUNA-N LINER CAN BE SUBSTITUTED FOR EPDM AT NO EXTRA
CHARGE
20" $12,037 N/A $13,121
24" $20,334 N/A $25,327
quotations.

September 19, 2011
LUG TYPE(3)(4) - A536 DUCTILE IRON BODY

FIGURE NO: KV52135X KV521352 KV521355 FIGURE NO: KV54435X KV544352 KV544355
2" $529 $560 $771 2" $692 $725 $965
2.5" $542 $572 $783 2.5" $716 $749 $989
3" $567 $597 $805 3" $795 $828 $1,067
4" $651 $681 $890 4" $973 $1,009 $1,247
5" $832 $868 $1,075 5" $1,228 $1,267 $1,502
6" $1,170 $1,206 $1,411 6" $1,804 $1,844 $2,075
8" $1,346 N/A $1,655 8" $2,059 N/A $2,408
10" $1,820 N/A $2,126 10" $2,942 N/A $3,287
12" $2,650 N/A $2,959 12" $4,067 N/A $4,412
FIGURE NO: K255135X K2551355 FIGURE NO: K254435X K2544355
14" $3,448 N/A $3,807 14" $6,760 N/A $7,166
16" $5,044 N/A $5,877 16" $9,401 N/A $10,343
18" $5,936 N/A $6,879 18" $11,243 N/A $12,308
20" $7,496 N/A $8,438 20" $14,282 N/A $15,351
24" $15,248 N/A $19,571 24" $24,920 N/A $29,817

FIGURE NO: KV56135X KV561352 KV561355
2" $627 $665 $908
2.5" $653 $690 $931
3" $691 $726 $967
4" $795 $831 $1,076 NOTES:
5" $1,032 $1,076 $1,314 (1) BUNA-N LINER CAN BE SUBSTITUTED FOR EPDM AT NO
EXTRA CHARGE
6" $1,525 $1,569 $1,802
8" $1,761 N/A $2,117 (3) SPECIFY IF DEAD-END SERVICE IS REQUIRED. CHANGE THE
10" $2,461 N/A $2,815 SERIES/STYLE DESIGNATOR FROM "K" TO "L" IN THE FIGURE
12" $3,791 N/A $4,145 NO.SEE "SPECIAL ACCESSORIES" FOR PRICING
(4) BI-DIRECTIONAL DEAD-END "PRESSURE" RATINGS: 200 PSI
FIGURE NO: K256135X K2561355
(2" - 12"): CHANGE "PRESSURE" CODE FROM "5" TO "0" 150 PSI
14" $5,781 N/A $6,195 (14" - 24"): CHANGE "PRESSURE" CODE FROM "5" TO "6"
16" $7,964 N/A $8,920
18" $9,835 N/A $10,924
20" $12,495 N/A $13,579
24" $21,902 N/A $26,893
quotations.

September 19, 2011

BODIES DISC SHAFT
LUG CL 300 316 STAINLESS

FLANGE WAFER - A395 LUG - A395 WAFER - Std. LUG - Std. STEEL or 17- MONEL
DRILLING Ductile Iron (1) Ductile Iron
(1) (2)
Epoxy Coated Epoxy Coated
(2)
MONEL
(3)
4pH
(4)
400
(4)
SIZE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE SIZE LIST PRICE SIZE LIST PRICE LIST PRICE
2" $74 $32 $37 N/C N/C 2" POA 2" $58 POA
2.5" $74 $36 $40 N/C N/C 2.5" POA 2.5" $58 POA
3" $74 $36 $40 N/C N/C 3" POA 3" $58 POA
4" $170 $36 $40 N/C N/C 4" POA 4" $85 POA
5" $185 $40 $44 N/C N/C 5" POA 5" $96 POA
6" $207 $40 $44 N/C N/C 6" POA 6" $113 POA
8" $418 $46 $50 N/C N/C 8" POA 8" $180 POA
10" $952 $46 $50 N/C N/C 10" POA 10" $261 POA
12" $1,099 $46 $50 N/C N/C 12" POA 12" $357 POA
14" - $164 $189 $703 $703 14" POA 14" $431 POA
16" - $232 $263 $756 $756 16" POA 16" $545 POA
18" - $330 $358 $805 $805 18" POA 18" $803 POA
20" - $488 $514 $857 $857 20" POA 20" $1,338 POA
24' - $725 $759 $955 $955 24' POA 24' $2,081 POA
N/C = No Charge
SEAT OPERATOR
LEVER
NEOPRENE VITON (400 F° VITON (275 F° EPDM (Peroxide (Infinite
HYPALON (Black) Max) Max) Cured, FDA) Position)
SIZE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE SIZE LIST PRICE
2" POA POA POA POA POA 2" $67

2.5" POA POA POA POA POA 2.5" $67
8" POA POA POA POA POA NOTES:
10" POA POA POA POA POA (1) MUST BE ADDED TO THE A536
PRICE
12" POA POA POA POA POA
(2) ADD TO CAST IRON OR DUCTILE
14" POA POA POA POA POA IRON BODY
16" POA POA POA POA POA (3) ADD TO VALVE WITH IRON DISC
18" POA POA POA POA POA (4) ADD TO VALVE WITH 416 SS STEM

September 19, 2011
EXAMPLE: 2356135X
250 Wafer, Carbon Steel, 285 PSI, Al. Brnz, 416 SS, PTFE Bushings, EPDM liner, No Operator, Custom
1 2 3 4 5 6 7 8 9

2" 02 416 SS 1
2½" 25 316 SS * 4
3" 03 Monel 400 7
4" 04 17-4 PH 9
5" 05 * Standard with 316 SS Disc Only
6" 06
10" 10 PTFE (2"-24") 3
12" 12
14" 14
8. Seat /Liner Code
16" 16
Buna-N 1
18" 18
Neoprene (Black) 3
20" 20
EPDM 5
24" 24
Viton (275 F°) 6
Hypalon 7
2. Series/Style Code PTFE/Buna-N L
250 Wafer ( 2 Viton (400 F°) P
250 Lug 4 EPDM (FDA) V
250 Lug-DES* 6 White Buna-N (FDA) W
* DES = Double Dead End Service White Buna-N B

Carbon Steel ** 3 Handle 2
316 Stainless Steel 4 Gear Operator 5
No Operator X
Pneu. Spring Return Fail Close 7
200 PSI (2" - 12") DES* 0
Pneu. Spring Return Fail Open 8
285 PSI (2" - 24") STANDARD 5
Electric 9
150 PSI (14" - 24") DES* 6
Gear Op w/Memory Stop G
125 PSI (2" - 12") PTFE 8
Buried Gear w/2"Sq. Nut C
* DES Pressure Rating: 2" - 12" 200 CWP
2" Nut Direct to Valve Stem D
14" - 24" 150 CWP
Chain Wheel U
5. Disc Code
316 SS 4
Al Brnz. (2" - 24") 10. Custom Code
6
Monel 400 7 Custom Product D
NOTE:
**Center Line Series 250 Carbon Steel valves with CE marking are good to 0° F for non-impact tested bodies and -20° F for impact tested carbon steel bodies.
quotations.

September 19, 2011
WAFER TYPE - A216 WCB CAST STEEL BODY

Aluminum Bronze Disc, 416 SS Stem, Aluminum Bronze Disc, 416 SS Stem,
FIGURE NO: 2356135X 23561352 23561355 FIGURE NO: 4356135X 43561352 43561355
2" $535 $568 $804 2" $562 $595 $831
2.5" $623 $656 $893 2.5" $696 $729 $964
3" $682 $719 $952 3" $731 $768 $1,004
4" $747 $781 $1,015 4" $903 $936 $1,174
5" $843 $884 $1,112 5" $1,222 $1,261 $1,488
6" $1,222 $1,261 $1,488 6" $1,538 $1,578 $1,810
8" $1,781 N/A $2,127 8" $2,209 N/A $2,551
10" $2,453 N/A $2,797 10" $3,662 N/A $4,005
12" $5,177 N/A $5,518 12" $5,612 N/A $5,957
14" $6,797 N/A $7,196 14" $8,781 N/A $9,180
16" $7,828 N/A $8,756 16" $9,389 N/A $10,317
18" $9,460 N/A $10,512 18" $10,843 N/A $11,897
20" $16,436 N/A $17,492 20" $19,277 N/A $20,332
24" $31,518 N/A $36,357 24" $36,435 N/A $41,274
316 Stainless Steel Disc, 316 SS Stem, 316 Stainless Steel Disc, 316 SS Stem,
FIGURE NO: 2354435X 23544352 23544355 FIGURE NO: 4354435X 43544352 43544355
2" $538 $571 $803 2" $562 $597 $827
2.5" $657 $692 $923 2.5" $697 $726 $958
3" $697 $726 $958 3" $744 $776 $1,008
4" $777 $811 $1,043 4" $987 $1,015 $1,247
5" $993 $1,033 $1,259 5" $1,366 $1,406 $1,627
6" $1,294 $1,332 $1,558 6" $1,606 $1,645 $1,870
8" $1,870 N/A $2,206 8" $2,288 N/A $2,624
10" $4,025 N/A $4,364 10" $5,210 N/A $5,548
12" $5,582 N/A $5,921 12" $6,013 N/A $6,353
14" $7,556 N/A $7,949 14" $9,501 N/A $9,894
16" $12,033 N/A $12,944 16" $13,560 N/A $14,474
18" $15,506 N/A $16,541 18" $16,867 N/A $17,903
20" $18,304 N/A $19,340 20" $21,095 N/A $22,131
24" $32,880 N/A $37,628 24" $37,703 N/A $42,454
NOTES:
(1) BUNA-N LINER CAN BE SUBSTITUTED FOR EPDM AT NO EXTRA CHARGE
(2) BI-DIRECTIONAL DEAD-END "PRESSURE" RATINGS: 200 PSI (2" - 12"): CHANGE "PRESSURE" CODE FROM "5" TO "0" 150 PSI (14" - 24"): CHANGE
"PRESSURE" CODE FROM "5" TO "6"
quotations.

POA = Price on Application CLPL-11-09
September 19, 2011
WAFER TYPE - CF8M STAINLESS STEEL
316 Stainless Steel Disc, 316 SS Stem,

FIGURE NO: 2454435X 24544352 24544355
2" $681 $716 $948
2.5" $803 $837 $1,066
3" $935 $967 $1,201
4" $1,043 $1,074 $1,305
5" $1,352 $1,390 $1,618
6" $1,678 $1,716 $1,944
8" $2,514 N/A $2,852
10" $4,633 N/A $4,971
12" $7,237 N/A $7,573
14" $9,163 N/A $9,555
16" $14,345 N/A $15,257
18" $18,555 N/A $19,588
20" $22,157 N/A $23,193
24" $40,356 N/A $45,105
LUG TYPE(2) - CF8M STAINLESS STEEL BODY
316 Stainless Steel Disc, 316 SS Stem,

FIGURE NO: 4454435X 44544352 44544355
2" $864 $896 $1,128
2.5" $1,043 $1,074 $1,305
3" $1,091 $1,126 $1,357
4" $1,522 $1,556 $1,784
5" $2,059 $2,100 $2,326
6" $2,361 $2,399 $2,624
8" $3,417 N/A $3,753
10" $5,215 N/A $5,552
12" $8,241 N/A $8,579
14" $11,752 N/A $12,145
16" $16,915 N/A $17,828
18" $20,836 N/A $21,872
20" $27,550 N/A $28,585
24" $46,530 N/A $51,278
NOTES:
(1) BUNA-N LINER CAN BE SUBSTITUTED FOR EPDM AT NO EXTRA CHARGE
(2) BI-DIRECTIONAL DEAD-END "PRESSURE" RATINGS: 200 PSI (2" - 12"): CHANGE "PRESSURE" CODE FROM "5" TO "0" 150 PSI (14" - 24"): CHANGE
"PRESSURE" CODE FROM "5" TO "6"
quotations.

September 19, 2011
CUSTOM PRODUCT OPTIONAL ADDERS

SEAT
NEOPRENE VITON (400 F° VITON (275 F° TEFLON (125 EPDM (Peroxide BUNA-N
HYPALON (Black) Max) Max) PSI Max)(3) Cured, FDA) (White, FG)
SIZE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE
2" POA POA POA POA POA POA POA
2.5" POA POA POA POA N/A POA POA
5" POA POA POA POA N/A POA POA
DISC SHAFT OPERATOR

LEVER
(Infinite
(1) (2) (2)
MONEL 17-4 PH MONEL 400 Position)
SIZE LIST PRICE SIZE LIST PRICE LIST PRICE SIZE LIST PRICE
2" POA 2" $162 POA 2" $67
2.5" POA 2.5" $162 POA 2.5" $67
3" POA 3" $167 POA 3" $67
4" POA 4" $184 POA 4" $67
5" POA 5" $193 POA 5" $73
6" POA 6" $207 POA 6" $73
8" POA 8" $521 POA
10" POA 10" $541 POA
12" POA 12" $572 POA
14" POA 14" POA POA
16" POA 16" POA POA
18" POA 18" POA POA
20" POA 20" POA POA
24' POA 24' POA POA
NOTES:
(1) ADD TO VALVE WITH IRON DISC
(2) ADD TO VALVE WITH 416 SS STEM

September 19, 2011
EXAMPLE: 04 XG6E2X
4" Lug Ductile Split Body, 150 psig, 255 Duplex Disc/Stem, Buna-N Liner, Bare Stem
1 1 2 3 4 5 6 7 9
1. Size Code 5. Disc/Stem Code

1" 01 255 Duplex SS E
1½" 150 255 Duplex SS/PTFE T
2" 2 255 Duplex SS/EPDM P
2½" 25 255 Duplex SS/Buna N B
3" 03 255 Duplex SS/Viton V
4" 04 4140 Carbon Steel (DHT) C
5" 05
6" 06 6. Seat Code
8" 08 Buna N * 2
10" 10 Buna N - White * W
12" 12 EPDM 5
Viton - 400° F P
PTFE/EPDM M
2. Style Code PTFE/Buna N L
Split Body Lug ( PTFE/Viton N
X
Split Body Wafer Silicone ( S
Y
* FDA Approved & Abrasion Resistant

10 Pos. Handle (DI) H
Ductile Iron - A395 G
10 Pos. Handle (SS) S
255 Duplex SS E
10 Pos. Handle (Alum) A
Aluminum A
5 Pos. Handle (Alum) L
Gear Operator O
No Operator X
4. Pressure Code Double Acting ( 6
150 PSIG 6 Fail Close (SR) 7
100 PSIG 4 Fail Open (SR). 8
50 PSIG (undercut) 9 Electric ( 9
8. Special Features Code

Custom Product D
quotations.

September 19, 2011
WAFER TYPE - DUCTILE IRON BODY LUG TYPE - DUCTILE IRON BODY
Ductile Iron A 395, 255 Stainless Steel Disc, Ductile Iron A 395, 255 Stainless Steel Disc,
(1)
Stainless Steel Stem, w/BUNA-N Seat(1) Stainless Steel Stem, w/BUNA-N Seat
OPER.: NONE-X HANDLE-H GEAR-O OPER.: NONE-X HANDLE-H GEAR-O
FIG. NO: STANDARD WAFER YG6E2_ FIG. NO: STANDARD LUG XG6E2_
SIZE LIST LIST LIST SIZE LIST LIST LIST
1" $279 $340 N/A 1" N/A N/A N/A
1.5" $327 $389 N/A 1.5" N/A N/A N/A
2" $452 $514 $976 2" $726 $786 $1,249
2.5" $550 $612 $1,074 2.5" $783 $843 $1,306
3" $550 $612 $1,074 3" $783 $843 $1,306
4" $684 $744 $1,204 4" $1,064 $1,126 $1,587
5" $899 $961 $1,424 5" $1,382 $1,441 $1,903
6" $1,261 $1,322 $1,785 6" $1,816 $1,879 $2,342
8" $2,116 $2,197 $2,797 8" $2,905 $2,989 $3,587
10" $3,385 $3,464 $4,063 10" $4,306 $4,387 $4,985
12" $5,041 $5,125 $5,724 12" $6,302 $6,385 $6,984
NOTES:
(1) EPDM SEAT CAN BE SUBSTITUTED FOR BUNA-N AT NO EXTRA CHARGE
(2) Max. Pressure Fullcut Disc 150 PSI, Max Pressure Undercut Disc 50 PSI
OPTIONAL MATERIAL ADDERS

Wafer Body Mat'l Options Lug Body Mat'l Disc/Stem
ALUM. YA 255 S STEEL YE 255 S STEEL 4140 Steel EPDM/255 Buna-N/255 Stainless - B Viton/255 Teflon®/255
XE (DHT) - C Stainless - P Stainless - V Stainless * - T
SIZE LIST LIST SIZE LIST SIZE LIST LIST LIST LIST LIST
1" N/A $438 1" N/A 1" N/A N/A N/A N/A N/A
1.5" N/A $475 1.5" N/A 1.5" N/A N/A N/A N/A N/A
2" $166 $484 2" $571 2" POA $209 $209 POA $1,411
2.5" N/A N/A 2.5" N/A 2.5" POA N/A N/A POA $1,474
3" N/A $571 3" $640 3" POA $241 $241 POA $1,474
4" $326 $653 4" $936 4" POA $270 $270 POA $1,625
5" N/A $819 5" N/A 5" POA N/A N/A POA $1,861
6" $451 $927 6" $650 6" POA $343 $343 POA $2,033
8" $542 $1,147 8" $1,603 8" POA $395 $395 POA $2,818
10" N/A $2,315 10" $3,307 10" POA N/A N/A POA $3,490
12" N/A $1,874 12" $3,922 12" POA N/A N/A POA $5,597
*Teflon®/255 Stainless Disc/Stem includes the Teflon® Lined Seat Adder
Seat Operator
White Buna- High Temp. Viton - Silicone - S PTFE/ EPDM - PTFE PTFE/ Viton - 10 Position DI 10 Position Alum 5 Position Alum Handle 10 Position SS Gear Operator -
N-W P M Buna-N - N Handle Kit * - Handle Kit - A Kit - L Handle Kit ** - O
L H S
SIZE LIST LIST LIST LIST LIST LIST SIZE LIST LIST LIST LIST LIST
1" POA POA POA N/A N/A N/A 1" $62 N/A N/A $162 N/A
1.5" POA POA POA N/A N/A N/A 1.5" $62 N/A N/A $162 N/A
2" POA POA POA POA POA POA 2" $62 $62 $62 $162 $521
2.5" POA POA POA POA POA POA 2.5" $62 $62 $62 $162 $521
8" POA POA POA POA POA POA 8" $84 N/A N/A $241 $684
Notes:
(1) All BUNA-N seats are Abrasion Resistant & FDA approved. EPDM seats are FDA approved
* 2" - 6" DI HANDLES ARE STANDARD WITH PADLOCK OPTION, 8" - 12" WITH PADLOCK OPTION MUST BE SPECIFIED AT TIME OF ORDER
** 1" - 12" STAINLESS HANDLES DO NOT INCLUDE NOTCH PLATES
IMPORTANT: CRANE Co. and its subsidiaries are not responsible for the accuracy, compliance, and legality of material contained in this price list offered in print, on
the company websites, or via any external links, or third party sites. Please contact your local CRANE Energy Representative for quotations.

September 19, 2011
SERIES 700 LUG & WAFER REPLACEMENT PARTS

SEAT
Buna N White Buna-N EPDM Viton Silicone TFE/EPDM TFE/Buna-N TFE/Viton
SIZE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE
1" POA POA POA POA POA N/A N/A N/A
1.5" POA POA POA POA POA N/A N/A N/A
2" POA POA POA POA POA POA POA POA
2.5" POA POA POA POA POA POA POA POA
DISC(1)/STEM
255 Stainless 4140 DHT Steel EPDM/255 SS Buna/255 SS Viton/255 SS Teflon®/255
Steel (2)
Stainless
SIZE
1" $130 N/A N/A N/A N/A N/A
1.5" $148 N/A N/A N/A N/A N/A
2" $317 N/A $422 $422 POA $1,176
2.5" $317 N/A N/A N/A POA N/A
3" $367 N/A $526 $526 POA $1,368
4" $475 N/A $662 $662 POA $1,536
5" $584 N/A N/A N/A POA N/A
6" $884 N/A $1,009 $1,009 POA $2,104
8" $1,205 N/A $1,422 $1,422 POA $3,409
10" N/A $1,822 $2,606 $2,606 POA $4,637
12" N/A $3,608 $3,973 $3,973 POA $6,357
NOTES:
(1) ADD A "U" TO THE END OF THE FIGURE NUMBER FOR AN UNDERCUT DISC
(2) TEFLON®/255 STAINLESS STEEL DISC/STEM INCLUDES THE TEFLON® LINED SEAT ADDER

September 19, 2011
EXAMPLE: 02 R1654D5X
2" 800 Wafer, Cast Iron, 150 PSI, DI, 316 SS Shaft & Springs, EPDM liner, No Operator
1 2 3 4 5 6 7 8 9
1. Size Code 5. Plate Code

2" 02 316 SS 4
2½" 25 DI 5
3" 03 Al Brnz. 6
4" 04 Monel 7
5" 05
6" 06
8" 08 6. Shaft Code
10" 10 316 SS 4
12" 12 Monel 400 7
14" 14
16" 16
18" 18
20" 20 7. Springs Code
316 SS D
2. Series/Style Code Monel 400 M
800 Wafer (R
800 Euro W
8. Seat /Liner Code

3. Body Material Code Buna-N 1
Epoxy Coated CI S Neoprene (Black) 3
Cast Iron 1 EPDM 5
None X Hypalon 7
Viton - High Temperature 0
9. Actuator Code
4. Pressure Code No Operator X
150 PSI (2" - 24") 6
quotations.

September 19, 2011
WAFER TYPE - CAST IRON BODY

EPDM Liner, 316 Stainless Steel Stem, w/316 Neoprene (Black) Liner, 316 Stainless Steel Stem,
Stainless Steel Springs w/316 Stainless Steel Springs
Plate Mtl. Ductile Iron Al. Bronze 316 SS Monel 400(1) Plate Mtl. Ductile Iron Al. Bronze 316 SS Monel 400(1)
FIGURE NO: R1654D5X R1664D5X R1644D5X R1677M5X FIGURE NO: R1654D3X R1664D3X R1644D3X R1677M3X
SIZE LIST PRICE LIST PRICE LIST PRICE LIST PRICE SIZE LIST PRICE LIST PRICE LIST PRICE LIST PRICE
2" N/A N/A $336 POA 2" N/A N/A $342 POA
2.5" N/A $410 $475 POA 2.5" N/A $413 $468 POA
3" N/A $466 $530 POA 3" N/A $462 $519 POA
4" N/A $538 $616 POA 4" N/A $547 $619 POA
5" N/A $706 $814 POA 5" N/A $699 $795 POA
6" $650 $813 $881 POA 6" $654 $812 $870 POA
8" $988 $1,232 $1,284 POA 8" $977 $1,207 $1,252 POA
10" $1,571 $1,949 $2,169 POA 10" $1,527 $1,885 $2,122 POA
12" $2,104 $2,608 $2,873 POA 12" $2,033 $2,508 $2,721 POA
14" $5,610 $6,663 $7,084 POA 14" POA POA POA POA
16" $6,649 $8,090 POA POA 16" POA POA POA POA
BUNA-N Liner, 316 Stainless Steel Stem, w/316 Viton Liner (400 F° Max) 316 Stainless Steel
Stainless Steel Springs Stem, w/316 Stainless Steel Springs
Plate Mtl. Ductile Iron Al. Bronze 316 SS Monel 400(1) Plate Mtl. Ductile Iron Al. Bronze 316 SS Monel 400(1)
FIGURE NO: R1654D1X R1664D1X R1644D1X R1677M1X FIGURE NO: R1654D0X R1664D0X R1644D0X R1677M0X
SIZE LIST PRICE LIST PRICE LIST PRICE LIST PRICE SIZE LIST PRICE LIST PRICE LIST PRICE LIST PRICE
2" N/A N/A $336 POA 2" N/A N/A $501 POA
2.5" N/A $410 $475 POA 2.5" N/A $659 $711 POA
3" N/A $466 $530 POA 3" N/A $713 $764 POA
4" N/A $538 $616 POA 4" N/A $788 $852 POA
5" N/A $706 $814 POA 5" N/A $1,018 $1,104 POA
6" $650 $813 $881 POA 6" $654 $1,171 $1,222 POA
8" $988 $1,232 $1,284 POA 8" $977 $1,801 $1,829 POA
10" $1,571 $1,949 $2,169 POA 10" $1,527 $2,723 $2,940 POA
12" $2,104 $2,608 $2,873 POA 12" $2,033 $3,451 $3,637 POA
14" $5,610 $6,663 $7,084 POA 14" POA POA POA POA
Hypalon Liner, 316 Stainless Steel Stem, w/316

Stainless Steel Springs NOTE:
Plate Mtl. Ductile Iron Al. Bronze 316 SS Monel 400(1) (1) STANDARD WITH MONEL SHAFT AND SPRINGS
FIGURE NO: R1654D7X R1664D7X R1644D7X R1677M7X
SIZE LIST PRICE LIST PRICE LIST PRICE LIST PRICE
2" N/A N/A $342 POA
2.5" N/A $463 $468 POA
3" N/A $517 $519 POA
4" N/A $613 $619 POA
5" N/A $783 $795 POA
6" $732 $909 $870 POA
8" $1,094 $1,207 $1,252 POA
10" $1,710 $1,885 $2,122 POA
12" $2,277 $2,508 $2,721 POA
14" POA POA POA POA
16" POA POA POA POA
18" POA POA POA POA
20" POA POA POA POA
quotations.
Page 24
POA = Price on Application CLPL-11-09
T: 936-588-8380 • F: 936-588-8381 • www.craneenergy.com
CRANE® CENTER LINE® ADDITIONAL OPTIONS AND ACCESSORIES
September 19, 2011
SPECIAL OPTIONAL ADDERS

DOCUMENTATION ADDER SPECIAL SERVICE ADDER NDE* ADDER
NON-
CERT. OF SILICONE POSITIVE
CONFOR- CERT. OF OXYGEN APPLI- MATERIAL I.D.
MANCE(3) ORIGIN(3) DEAD-END SERVICE CATIONS (per shot)
SIZE NET PRICE NET PRICE SIZE LIST PRICE LIST PRICE LIST PRICE SIZE NET PRICE
2" $29 $635 $213 All Sizes $55
2" - 30" $50 Per Valve $50 Per Valve
2.5" $29 $635 $231 * NDE = Non-Destructive
3" $29 $635 $252 Examination
CERT. SEAT 4" $136 $970 $327
DRAWINGS HYDRO TEST 5" $136 $1,232 $378
SIZE NET PRICE NET PRICE 6" $136 $1,307 $425
8" $185 $1,458 $619
2" - 30" $50 Per Line Item $50 Per Valve
10" $185 $1,829 $739
12" $412 $1,979 $859
14" $553 $2,130 $1,075
16" $597 $2,130 $1,271
18" $689 $2,800 $1,453
20" $782 $2,800 $1,760
24" $1,238 $3,847 $2,419
30" $1,929 $4,481 $3,454
REPLACEMENT PARTS
HANDLES FOR SERIES 200 ONLY GEAR OPERATOR FOR SERIES 200 ONLY*
BURIED
LEVER HANDLE LEVER HANDLE GEAR & SERVICE w/ 2" DBL FLG MEMORY CHAINWHEEL
(10 Positions) (Infinite Position) HANDWHEEL Sq. Nut LOCKABLE STOP (1)
SIZE LIST PRICE LIST PRICE SIZE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE
2" $29 $60 2" $243 $1,033 $738 $358 $844
2.5" $29 $60 2.5" $243 $1,033 $738 $358 $844
3" $29 $60 3" $243 $1,033 $738 $358 $844
4" $29 $60 4" $243 $1,303 $738 $358 $844
5" $34 $65 5" $243 $1,303 $738 $377 $844
6" $34 $65 6" $243 $1,303 $738 $377 $844
8" $65 $136 8" $312 $1,303 $738 $458 $844
10"(4) $191 $191 10" $312 $1,303 $1,393 $458 $844
12"(4) $204 $204 12" $312 $1,303 $1,393 $458 $844
14" $367 $1,303 $1,393 $458 $844
16" $1,234 $1,616 $1,393 $1,467 $1,421
18" $1,234 $1,616 $1,942 $1,467 $1,421
20" $1,351 $1,869 $1,942 $1,467 $1,421
24" $1,957 $3,848 $3,499 $2,606 $1,421
30" $2,497 POA POA POA $1,421
*All Other Series Replacement Gear Operators - POA
GEAR OPERATOR ACCESSORIES

STEM EXTENSION(2)
CHAIN
GEAR & HANDWHEEL
SIZE LIST PRICE SIZE LIST PRICE
#2.5 $4.62 2" - 6" $521 base price plus $8.05 per inch
#3.5 $4.62 8" $683 base price plus $8.05 per inch
10" - 14" $747 base price plus $8.05 per inch
NOTES:
(1) The chainwheel price must be added to the chosen gear operator. The chainwheel assembly includes the following: Cast iron sprocket rim, malleable iron guide arm, safety hub and clamps for
attachment to rim of the handwheel. Chainwheel model #2.5 fits a 12" handwheel & model 3.5 fits an 18" handwheel
(2) The length of the stem extension is measured from the center line of the valve to the center line of the gear operator input shaft
(3) Certificate of Conformance and/or Certificate of Origin are no charge if requested at time of order placement
(4) Gear Operators are recommended for sizes above 8". Users assume responsibility for 10" and 12" handles
IMPORTANT: CRANE Co. and its subsidiaries are not responsible for the accuracy, compliance, and legality of material contained in this price list offered in print, on the
company websites, or via any external links, or third party sites. Please contact your local CRANE Energy Representative for quotations.

CRANE® CENTER LINE® SERIES 200, 225 AND 250
September 19, 2011
REPLACEMENT PARTS
SERIES 200 STANDRD OR CUSTOM
SEAT
BUNA-N EPDM HYPALON NEOPRENE VITON VITON TEFLON EPDM (Peroxide BUNA-N
(Black) (400 F° Max) (1) (275 F° Max) (1) (125 PSI Max) (1) Cured, FDA) (White, FG)
SIZE LIST PRICE SIZE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE
2" POA POA POA POA POA POA POA POA POA
2.5" POA POA POA POA POA POA N/A POA POA
5" POA POA POA POA POA POA N/A POA POA
SERIES 225/250
SEAT
BUNA-N EPDM HYPALON NEOPRENE VITON VITON TEFLON EPDM (Peroxide BUNA-N
(Black) (400 F° Max) (1) (275 F° Max) (1) (125 PSI Max) (1) Cured, FDA) (White, FG)
SIZE LIST PRICE SIZE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE LIST PRICE
2.5" POA POA POA POA POA POA N/A POA POA
NOTES:
quotations.

September 19, 2011
REPLACEMENT PARTS
SERIES 800
CHECK PLATE(1) SPRINGS SHAFT
DUCTILE IRON ALUMINUM 316 STAINLESS 316 MONEL 400 316 STAINLESS
BRONZE STEEL STAINLESS STEEL
STEEL
SIZE LIST PRICE LIST PRICE LIST PRICE SIZE LIST PRICE LIST PRICE SIZE LIST PRICE
2" N/A N/A $109 2" $31 POA 2" $38
2.5" N/A $59 $131 2.5" $31 POA 2.5" $44
3" N/A $70 $146 3" $31 POA 3" $49
4" N/A $88 $187 4" $31 POA 4" $59
5" N/A $101 $253 5" $44 POA 5" $69
6" $74 $116 $288 6" $52 POA 6" $83
8" $119 $171 $371 8" $63 POA 8" $94
10" $167 $261 $537 10" $92 POA 10" $111
12" $247 $366 $736 12" $142 POA 12" $119
14" $471 $760 N/A 14" $177 POA 14" $185
16" $737 $1,223 N/A 16" $216 POA 16" $232
18" $870 $2,280 N/A 18" $266 POA 18" $284
20" $1,036 $2,962 N/A 20" $315 POA 20" $344
NOTES:
(1) THE PRICE SHOWN IS FOR ONE PLATE ONLY. IF BOTH PLATES MUST BE REPLACED, MULTIPLY THE PRICE SHOWN BY TWO
(2) SEATS ARE NOT AVAILABLE AS PARTS
quotations.

CRANE ENERGY FLOW SOLUTIONS
Effective September 19, 2011
TERMS AND CONDITIONS (PAGE 1 OF 2)
1. DEFINITIONS: The following definitions apply:
‘‘CRANE Energy” means CRANE Energy Flow Solutions.
‘‘Buyer’’ means the person, firm, or corporation to whom CRANE Energy has offered to sell goods or from whom CRANE Energy has received an order to
purchase goods.
‘‘Material’’ means the goods the Buyer is to purchase from CRANE Energy.
‘‘Order’’ means the Buyer’s purchase order and all attachments, exhibits, and other documents referenced herein.
2. APPROVAL AND ACCEPTANCE OF ORDERS: All Orders, including any changes thereto, shall be subject to approval and acceptance by CRANE ENERGY.
3. PRICES: Prices published or announced by CRANE Energy are subject to change without notice. Prices, at the discretion of CRANE Energy, may be
subject to a surcharge due to the volatility of raw materials and invoiced as part of the price of the material or as a separate charge.
4. TAXES: In addition to the stated prices and any other charges due, Buyer shall reimburse CRANE Energy for all sales, use, excise, purchase transaction, or any other taxes that
CRANE Energy must at any time either pay or collect in connection with Material sold by CRANE Energy to the Buyer.
5. TERMS OF PAYMENT: CRANE Energy will determine extension of credit and terms of payment at its sole discretion. Standard Payments shall be due thirty (30) days from the
invoice date. Payment must be made in U.S. dollars and by means acceptable to CRANE Energy. Overdue payments shall bear interest at the lesser of 1.5% per month or the
maximum permitted by law. Buyer WAIVES ANY RIGHT OF SET‐OFF AND SHALL MAKE NO DEDUCTIONS FROM PAYMENTS DUE TO CRANE ENERGY OR FOR ANY DAMAGES OF
ANY TYPE CLAIMED BY BUYER AGAINST CRANE ENERGY. Pending approval of credit, delivery may be delayed without liability to CRANE Energy. If, in CRANE Energy's judgment,
Buyer's financial responsibility is or becomes impaired or unsatisfactory or if Buyer has failed or fails to perform under any contract, CRANE Energy shall have the right to demand
and Buyer shall provide advance payment or security to CRANE Energy and CRANE Energy may withhold shipment until receipt thereof. Material is subject to shipment in whole
or in part, at the option of CRANE Energy, and each shipment is subject to immediate invoicing. CRANE Energy may, at it discretion, suspend shipment or
terminate the Order if any such invoice is not paid according to terms of payment.
6. SECURITY INTEREST: Buyer hereby grants to CRANE Energy a purchase money security interest in each item of Material. This interest will be satisfied by payment in full to
CRANE Energy, or, if expressly consented to by CRANE Energy in writing, by the Buyer’s return of the Material to CRANE Energy. Buyer hereby authorizes and empowers CRANE
Energy to execute on behalf of Buyer and to file with the appropriate governmental authorities any and all financing statements and other documents necessary to perfect
CRANE Energy’s security interest in the Material, for this purpose only, hereby appoints CRANE Energy and its representatives and designees as attorney‐in‐fact, agents and
authorized signatories of Buyer with respect to such
financing statements and other documents.
7. MINIMUM ORDER CHARGE: Orders for valves will be subject to a net minimum invoice charge of $100. Parts minimum is $50.
8. DELIVERY AND SHIPMENT OF MATERIAL: Delivery of Material to a common carrier shall constitute delivery thereof to Buyer, and risk of loss shall pass to Buyer at such time.
Buyer shall pay all shipping and handling charges. Any claims for damage to or loss of Material in transit shall be filed by Buyer directly with, and shall be the sole responsibility
of, the carrier. Shipping schedules are estimates. CRANE Energy will use every reasonable means at its disposal to make delivery within the time specified. Shipping schedules are
computed from time of Order entry. IN NO EVENT SHALL CRANE ENERGY BE LIABLE FOR DAMAGES OF ANY KIND, LIQUIDATED OR UNLIQUIDATED, INCLUDING CONSEQUENTIAL
DAMAGES OR DAMAGES FOR LOSS OF USE OR LOST
PROFITS, OR DUE TO FAILURE TO MAKE TIMELY DELIVERY OR MEET SHIPPING SCHEDULES.
9. CORRECTIONS: CRANE ENERGY reserves the right to correct clerical and arithmetic or stenographic errors or omissions in Orders, invoices, quotations,
price schedules, acknowledgements, or other documents.
10. DEFAULT BY BUYER: Upon failure or refusal of Buyer to accept conforming Material, or upon any other default by Buyer, CRANE Energy shall be entitled to exercise all
remedies of a secured party under the Uniform Commercial Code with respect to the Material as well as any other remedies to which CRANE Energy may be entitled by law or in
equity, including specific performance, CRANE Energy shall be entitled to recover all costs incurred by it
in connection therewith, including reasonable attorney’s fees.
11. CLAIMS: All claims for shortages or other nonconformity in filling Orders shall be made in writing within ten (10) calendar days after Buyer’s receipt
of Material.
12. RETURN OF MATERIAL AND TERMINATION OF ORDERS:
Except as provided in Section 13 below, Buyer shall not be entitled to return any Material without first obtaining written consent from CRANE Energy.
Buyer shall not be entitled to terminate the Order or any part thereof. If Buyer seeks to terminate all or any part of an Order prior to delivery, Buyer shall make such request to
CRANE Energy in writing at once. No Order or part thereof shall be subject to cancellation or termination by Buyer without prior written consent, which may be given, withheld,
or conditioned upon payment of a cancellation charge CRANE Energy’s sole discretion.
Material which has been specifically manufactured or modified for Buyer shall not be returnable.
For CRANE Energy to consider Buyer’s request to return Material, such Material must be:
of CRANE Energy’s manufacture,
in clean, new, saleable condition,
shipped from CRANE Energy’s factory or a CRANE Energy service center within twelve (12) calendar months preceding the request to return, and the request will not cause
inventory to exceed maximum allowable level,
personally inspected by a CRANE Energy Sales Representative prior to its return.
If a return is allowed, CRANE Energy will credit Buyer’s account the invoiced price, less 20% handling cost, and less any freight paid by CRANE Energy.
13. WARRANTY: CRANE Energy warrants that the Material manufactured by it is free from defects in materials and workmanship under normal use and service and that it will
function in accordance with CRANE Energy’s published specifications, if any, for a period of one year after shipment. This warranty is made to the initial Buyer who buys the
Material for commercial or industrial purposes only and does not extend to any other person or entity. No warranty whatever is made with respect to Material purchased by
Buyer for personal, family, or household use. OUR SOLE AND EXCLUSIVE LIABILITY AND BUYER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY OR ANY WARRANTY
IMPLIED BY LAW, AND FOR ANY CAUSE WHATSOEVER, REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT OR IN TORT, INCLUDING STRICT LIABILITY, AND
NEGLIGENCE, SHALL BE LIMITED TO:
(1) the repair of the defective Material,
(2) replacement of any part or the whole of the Material proven to be defective, or
(3) refund of the purchase price of the defective Material.
Page 28
CRANE ENERGY FLOW SOLUTIONS
EffectiveSeptember 19, 2011
TERMS AND CONDITIONS (PAGE 2 OF 2)
The choice of such remedy shall be determined by CRANE Energy at its sole discretion. Buyer must notify CRANE Energy within ten (10) calendar days of discovery of any claimed
defect. If instructed by CRANE Energy to do so, Buyer must return the Material claimed to be defective to our factory at Buyer’s cost for inspection. If CRANE Energy elects
remedies (1) or (2) above, the repaired or replaced Material will be made available to Buyer F.O.B. factory. If CRANE Energy elects remedies (2) or (3) above, we will be entitled to
keep the defective Material or parts thereof. Buyer shall not be required to deliver defective Material or a defective part to CRANE Energy if the Material or part was destroyed
as a result of its defect or of any defect in any part covered in this warranty, and CRANE Energy is reasonably satisfied that the Material or part was defective at the time of sale.
If both of these conditions are met, CRANE Energy shall replace such Material or part or refund the purchase price in the same manner provided herein as if Buyer had delivered
it to CRANE Energy’s factory. Except for the warranty of title, the warranty in this section is made in lieu of all other warranties, express or implied, including, without limitation,
the warranties of MERCHANTABILITY and FITNESS FOR ANY PARTICULAR PURPOSE, AND NO OTHER WARRANTY IS MADE OR AUTHORIZED TO BE MADE. CRANE Energy also does
not warrant that the use or operation of Material will be uninterrupted or trouble free or will meet Buyer’s requirements. IN NO EVENT SHALL CRANE ENERGY BE LIABLE OR
RESPONSIBLE FOR DAMAGES FOR PERSONAL INJURY, DAMAGES FOR HARM TO PROPERTY, OR FOR CONSEQUENTIAL, INCIDENTAL, PUNITIVE, OR EXEMPLARY DAMAGES
INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF USE, LOST PROFITS, INTERRUPTION OF BUSINESS, OTHER ECONOMIC LOSS, OR ANY OTHER DAMAGES
WHATSOEVER IN CONNECTION WITH THE WARRANTY SET FORTH ABOVE OR IMPLIED BY LAW, OR IN CONNECTION WITH ANY OTHER LIABILITY, REGARDLESS OF THE FORM OF
ACTION, WHETHER IN CONTRACT OR IN TORT, INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY AND NEGLIGENCE. THE WARRANTY AND REMEDY SET FORTH ABOVEARE THE
SOLE WARRANTY AND EXCLUSIVE REMEDY AVAILABLE TO BUYER OR ANY OTHER PERSON OR ENTITY. The sole purpose of the stipulated sole and exclusive remedy shall be to
provide Buyer with the free repair or replacement of defective Material in the manner provided herein. This exclusive remedy shall not be deemed to have failed of its essential
purpose so long as CRANE Energy is willing and able to repair or replace defective Material in the prescribed manner. No warranty applies to any Material which has been
modified or changed in design or function after leaving CRANE Energy’s factory or which has been misused, neglected, mishandled, improperly installed, improperly serviced,
improperly maintained, operated beyond its design capabilities, or used for other than its intended purposes. Buyer assumes all risk that the Material will not be suitable for
Buyer’s particular purpose. Buyer shall consult knowledgeable advisors and use its own skill and judgment to select suitable goods, including, but not limited to, size, capacity,
and
proper type and material of construction for such goods.
14. ILLUSTRATIONS: Catalog illustrations are representations of a certain size of each product line but do not necessarily represent all sizes in all details. CRANE Energy reserves
the right to institute changes in materials, designs, and specifications without notice in keeping with our policy of continuous
product improvement.
15. EFFECT OF TERMS AND CONDITIONS: The terms and conditions herein contained shall apply to any Order or direction received from Buyer, and any provision or direction
from Buyer purporting to modify or change said terms and conditions in any way is objected to and shall not be binding upon CRANE Energy. CRANE Energy’s terms and
conditions will be in effect regardless of any provisions to the contrary contained in Buyer’s Order or request
for shipment.
16. ACTS OF GOD, STRIKES, EMBARGOES: The time CRANE Energy to perform shall be extended proportionately as its ability to perform is materially affected by causes beyond
its reasonable control, including, but not limited to, any Act of God, or by labor disputes, whether authorized by the applicable bargaining unit or not, by embargoes, trade
restrictions, governmental directives, war, riots or insurrections, fire, flood, delays in
transportation or failure by suppliers to deliver equipment or supplies.
17. WAIVER: Waiver by CRANE Energy of any breach of these provisions shall not be construed as a waiver of any other breach.
18. ASSIGNMENT: None of Buyer’s rights under any Order shall be assigned or otherwise transferred by Buyer to any other person, whether by the
operation or law or otherwise, without CRANE Energy’s prior written approval.
19. WEIGHTS: Weights in catalogs, price schedules, quotations, and acknowledgements of all Orders are approximate and in no sense guaranteed.
They represent the average weight of products as made from patterns in use at the time weights were compiled.
20. SPECIAL CONDITIONS: Any additional cost incurred in packaging or in making any special tests of inspection requested by Buyer in addition to those regularly supplied by
CRANE Energy will be charged to Buyer. Such tests and inspections will be made only at the factory before the date of shipment.
21. STATUTE OF LIMITATIONS: CRANE Energy and Buyer expressly agree that any action for CRANE Energy’s breach of these provisions or any contract of sale with Buyer must
be commenced within one (1) year of the date of the alleged breach.
22. APPLICABLE LAW / FORUM: Buyer’s Order shall be governed by the domestic state laws of the State of Delaware, U.S.A. CRANE Energy and Buyer agree that any appropriate
state or federal court located in Delaware, U.S.A. shall have exclusive jurisdiction over any case or controversy arising under
or in connection with Buyer’s Order and shall be a proper forum in which to adjudicate such case or controversy.
23. TECHNICAL INFORMATION: Buyer shall hold in confidence any and all technical information proprietary to CRANE Energy, including, but not limited
to, designs, specifications, and any know‐how which is disclosed directly or indirectly, intentionally or unintentionally, to Buyer.
24. COMPLIANCE WITH LAW: Buyer shall comply with all laws and other requirements having force of law applicable at any time which affect in any manner Buyer’s Order or
Buyer’s performance there under. Buyer shall notify CRANE Energy at once of any governmental action, prohibition, or limitation which affects in any manner Buyer’s Order. By
placing its Order with CRANE Energy, Buyer represents and warrants that it is neither subject to any U.S. embargo or trade prohibition or limitation, nor subject to any embargo
or trade prohibition or limitation in which the U.S. participates. Buyer agrees that it will not resell or distribute Material to any individual or entity prohibited from receiving
CRANE Energy goods or from dealing with CRANE Energy under U.S. law or under any embargo or trade prohibition or limitation in which the U.S. participates. Buyer shall
indemnify and hold CRANE Energy harmless from and against any and all claims, demands, losses, costs, or liability incurred by CRANE Energy as a result of Buyer’s breach of this
provision. CRANE Energy reserves the right to cancel Buyer’s Order, suspend, or terminate CRANE Energy’s performance, or take any other action it
deems necessary as a result of Buyer’s breach of this provision.
25. SEVERABILITY: If any provision herein shall be held invalid, illegal, or unenforceable, the validity, legality, and enforceability of the remaining
provisions shall not in any way be affected or impaired thereby.
26. ATTORNEY’S FEES: CRANE Energy shall be entitled to recover its reasonable attorneys' fees incurred in connection with collection of all or a portion
of the purchase price and/or reasonable additional charges from Buyer.
27. ENTIRETY OF AGREEMENT: These terms and conditions, together with CRANE Energy’s quote, Buyer’s Order, and any specifications, requisitions, drawings, and other related
documents attached to Buyer’s Order or referred to therein (subject to paragraph 15 above), shall constitute the entire agreement between CRANE Energy and Buyer. Any
change, amendment, or modification of any of these terms and conditions must be made in writing
and signed by CRANE Energy.
Page 29
CRANE Energy Flow Solutions®
4526 Research Forest Drive - Suite 400
The Woodlands, TX 77381
Tel: (936) 271-6500

Fax: (936) 271-6510
www.craneenergy.com
CENTERLINE-BUTTERFLY VALVES-PL-EN-LOCAL-9/11
NUCLEAR
Crane Co., and its subsidiaries cannot accept responsibility for possible errors in catalogues, brochures, other printed materials, and website
information. Crane Co. reserves the right to alter its products without notice, including products already on order provided that such
alteration can be made without changes being necessary in specifications already agreed. All their trademarks in this material are property of
the Crane Co. or its subsidiaries. The Crane and Crane brands logotype (Aloyco®, Center Line®, Compac-Noz®, Crane®, Duo-Chek®, Flowseal®,
Jenkins®, Krombach®, Noz-Chek®, Pacific Valves®, Stockham®, Triangle®, Uni-Chek®) are registered trademarks of Crane Co. All rights reserved.
© 2011CRANE Energy Flow Solutions, www.craneenergy.com

CLPL 11 09

Uploaded by

Copyright:

Available Formats

CLPL 11 09

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CLPL 11 09

Uploaded by

Copyright:

Available Formats

brands you trust.

1. Size Code 5. Disc Code

3. Body Material Code

POA = Price on Application Page 2

WAFER TYPE - A126 EPOXY COATED CAST IRON BODY

Aluminum Bronze Disc, 416 SS Stem,

POA = Price on Application Page 3

Aluminum Bronze Disc, 416 SS Stem,

POA = Price on Application Page 4

WAFER TYPE - A536 DUCTILE IRON BODY

Aluminum Bronze Disc, 416 SS Stem,

POA = Price on Application Page 5

LUG TYPE DES(3) - A536 DUCTILE IRON BODY

Aluminum Bronze Disc, 416 SS Stem,

POA = Price on Application Page 6

DOUBLE FLANGE(2) TYPE - A536 DUCTILE IRON BODY - 150 CWP

Aluminum Bronze Disc, 416 SS Stem,

BASE VALVE OPTIONAL ADDERS

POA = Price on Application Page 7

1. Size Code 6. Stem/Shaft Code

WAFER TYPE - A536 DUCTILE IRON BODY

Aluminum Bronze Disc, 416 SS Stem,

POA = Price on Application Page 9

LUG TYPE(3) - A536 DUCTILE IRON BODY

Aluminum Bronze Disc, 416 SS Stem,

POA = Price on Application Page 10

BASE VALVE OPTIONAL ADDERS

EPDM BUNA-N LEVER

POA = Price on Application Page 11

1. Size Code 6. Stem/Shaft Code

3. Body Material Code 9. Actuator Code

POA = Price on Application Page 12

WAFER TYPE - A536 DUCTILE IRON BODY

Aluminum Bronze Disc, 416 SS Stem,

POA = Price on Application Page 13

LUG TYPE(3)(4) - A536 DUCTILE IRON BODY

Aluminum Bronze Disc, 416 SS Stem,

POA = Price on Application Page 14

BASE VALVE OPTIONAL ADDERS

LUG CL 300 316 STAINLESS

2" POA POA POA POA POA 2" $67

POA = Price on Application Page 15

1. Size Code 6. Stem/Shaft Code

3. Body Material Code 9. Actuator Code

POA = Price on Application Page 16

WAFER TYPE - A216 WCB CAST STEEL BODY

POA = Price on Application Page 17

WAFER TYPE - CF8M STAINLESS STEEL

316 Stainless Steel Disc, 316 SS Stem,

LUG TYPE(2) - CF8M STAINLESS STEEL BODY

316 Stainless Steel Disc, 316 SS Stem,

POA = Price on Application Page 18

CUSTOM PRODUCT OPTIONAL ADDERS

DISC SHAFT OPERATOR

POA = Price on Application Page 19

1. Size Code 5. Disc/Stem Code

3. Body Material Code 7. Actuator Code

8. Special Features Code