Parts Catalog: 0CR10-M80100EN
Parts Catalog: 0CR10-M80100EN
0CR10-M80100EN
3. When ordering parts, clearly write down the engine model and serial number, as
well as the name and number of each part in your order sheet. This will help
insure reliable delivery of the parts you have ordered.
Directions for the Parts Catalog.
1.The parts stipulated in this Parts Catalog are not necessarily standard equipped parts.
2.Parts may change without prior notice.
3.The following is an example of the Parts Catalog format.
Remarks
(1) BOOST COMPEMSATOR TYPE. OPTIONAL
PART, TO E00155,(4JH-DT, 4JH-DTZ
1 Ref. No.
The Ref. No. listed may not be in accordance with the illustration Ref. No.
(Ex.) Illustration No. List Ref No.
1 1 (Before change) 1- 1 (After change)
For interchangeable symbols N, R and K, illustrations for new parts may be abbreviated.
2 Lev. (Level)
Level indication
The numbers below indicate the level of relativity towards the main part.
1 ----- Main parts (Assembly parts)
2 ----- Sub component included in ” 1 ”.
3 ----- Sub component included in ” 2 “.
Note) Parts that are not for sale are partially illustrated but not listed.
3 Interchangeability Mark
When a part change takes place, one of the following interchangeability symbols is indicated beside the part.
Symbol Interchangeability Contents note
N Old
Yes
New New Part is interchangeable for Old Part but Old Part is not interchangeable
No for New Part.
Q Old
No New Part is not interchangeable for Old Part but Old Part is interchangeable
New
Yes for New Part.
Yes
R Old New New/ Old Parts are both interchangeable.
Yes
No
S Old New New/ Old Parts are both not interchangeable.
No
W Part discontinued.
Z Part newly added.
F Not interchangeable by a single part but interchangeable together with related
parts.
K Changes only for used parts quantities.
L100N5-GETM3
1. CYLINDER BLOCK
3. SUCTION LINE
6. COOLING DEVICE
Remarks
(1)REPAIR PART.
(2)UNDER SIZED(U.S.=0.25)PART.
(3)UNDER SIZED(U.S.=0.50)PART.
Copyright (C) YANMAR CO., LTD. All RightsReserved.
0CR10-M80100
(A)=L100N5-GETM3 (D)=
Fig.2. CYLINDER HEAD & BONNET (B)= (E)=
(C)= (F)=
No. Lev. Parts No. Description Q'ty I R
(A) (B) (C) (D) (E) (F)
1 1 114310-01200 BOLT, CYL.HEAD A 2
2 1 114310-01210 BOLT, CYL.HEAD B 2
3 1 11432C-11020 HEAD ASSY, CYLINDER 1
8 1 11431C-11100 VALVE, INTAKE 1
9 1 11431C-11110 VALVE, EXHAUST 1
10 1 114310-11120 SPRING, VALVE 2
11 1 114310-11180 RETAINER, SPRING 2
12 1 114310-11930 COTTER ASSY 2
14 1 11431C-11250 SUPPORT ASSY, ARM 1
15 2 11431C-11260 SUPPORT, ROCKER ARM 1
16 2 22243-000150 RING, 15 2
17 2 11431C-11650 ARM, ROCKER 1
19 3 114250-11240 SCREW, VALVE ADJUST 1
20 3 26856-060002 NUT, M6 1
21 2 11431C-11660 ARM, ROCKER 1
23 3 114250-11240 SCREW, VALVE ADJUST 1
24 3 26856-060002 NUT, M6 1
25 1 114650-11340 SEAL, VALVE STEM 2
26 1 104211-11370 CAP, VALVE 2
27 1 114339-11451 PROTECTOR, NOZZLE 1
28 1 114339-11551 SEAT, NOZZLE 1
29 1 114650-11600 WASHER 2
30 1 114210-11901 RETAINER, NOZZLE 1
31 1 22351-040008 PIN, SPRING 4.0X 8 1
32 1 26106-080502 BOLT, M8X 50 PLATED 2
33 1 26226-060552 STUD, M6X 55 2
34 1 26366-060002 NUT, M6 2
35 1 114310-11310 GASKET, BONNET 1
36 1 11431C-11960 BONNET ASSY, HEAD 1
38 2 114210-03580 DECOMPRESSION ASSY 1
41 2 114250-03640 SPRING,DECOMPRESSION 1
43 2 22312-030160 PIN, PARALLEL M3X16 1
47 1 26106-060652 BOLT, M6X 65 PLATED 3
Remarks
(1)OVER SIZED(O.S.=0.25)PART.
(2)OVER SIZED(O.S.=0.50)PART.
(3)UNDER SIZED(U.S.=0.25)PART.
(4)UNDER SIZED(U.S.=0.50)PART.
Copyright (C) YANMAR CO., LTD. All RightsReserved.
0CR10-M80100
(A)=L100N5-GETM3 (D)=
Fig.5. LUB.OIL PUMP & GOVERNOR (B)= (E)=
(C)= (F)=
No. Lev. Parts No. Description Q'ty I R
(A) (B) (C) (D) (E) (F)
1 1 114650-32010 PUMP ASSY, OIL 1
7 1 114250-32070 COVER 1
8 1 103338-32570 O-RING 1
9 1 22312-030160 PIN, PARALLEL M3X16 1
10 1 26106-060122 BOLT, M6X 12 PLATED 3
11 1 114250-35110 FILTER ASSY, OIL 1
13 2 24341-000224 O-RING, 1AS22.4 1
14 1 26106-060162 BOLT, M6X 16 PLATED 1
15 1 114770-61190 WASHER 1
16 1 714210-61700 GOVERNOR ASSY 1
17 2 114210-61290 WEIGHT ASSY,GOVERNOR 1
22 1 114311-61500 LEVER ASSY, GOVERNOR 1
31 2 22322-030200 PIN, TAPER 3X20 1
33 1 114770-61520 BEARING, NEEDLE 2
34 1 114770-61600 SEAL, OIL 1
35 1 114770-61610 WASHER, THRUST 1
36 1 114252-66053 HANDLE, REGULATOR 1
38 2 105225-66990 SCREW, M5X8.5 1
39 1 114349-66110 BRACKET, REGULATOR 1
40 1 114252-66252 SPRING, RETURN 1
41 1 114250-66440 BOLT, ADJUSTING 1
42 1 26106-060142 BOLT, M6X 14 PLATED 1
43 1 26106-060202 BOLT, M6X 20 PLATED 1
44 1 26757-060002 NUT, LOCK M6 1
45 1 114320-66010 SPRING, REGULATOR 1
46 1 114250-66200 SPRING, RETURN 1
47 1 114780-61090 TIN 2
48 1 22451-060000 WIRE, 0.6 2
49 1 114211-66600 LIMITER ASSY, FUEL 1
54 1 26776-100002 NUT, LOCK M10 1
Remarks
(1)OPTIONAL
Copyright (C) YANMAR CO., LTD. All RightsReserved.
0CR10-M80100
(A)=L100N5-GETM3 (D)=
Fig.10. PACKAGED PART (B)= (E)=
(C)= (F)=
No. Lev. Parts No. Description Q'ty I R
(A) (B) (C) (D) (E) (F)
2 1 183279-08210 DAMPER 4
3 1 183993-77410 BRACKET 1
4 1 114654-77910 STOPPER ASSY 1