EUCLID®

DISC BRAKE CALIPER REPAIR KIT

catalogue
 AFTERMARKET PARTS WARRANTY

We warrant all new parts for one year from date of shipment to the buyer against defective
material or workmanship (but not against damage caused by accident, abuse or improper
installation, maintenance or repair) when such parts are used on vehicles the specifications
of which have been approved by our Engineering Department.

As the exclusive remedy under this warranty, we will, at our option, repair or replace such
parts free of charge, or take back the nonconforming parts and refund the monies paid by
buyer for such parts, if found on examination by us to be nonconforming and if necessary
return charges are prepaid.

If it is necessary to return any parts under this warranty, buyer agrees not to make any
deduction on account thereof from remittances on current accounts while claims are in the
process of disposition. Any expense incurred without our consent for repairs or
replacement will not be allowed.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES OR

CONDITIONS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. IN
NO EVENT SHALL SELLER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY NATURE.

Only genuine Meritor replacement parts are covered by this aftermarket parts warranty.

DISCLAIMER

Information contained in this publication is in effect at the time the publication was
approved for printing and is subject to change without notice or liability. Meritor, reserves
the right to revise the information presented or discontinue the production of parts
described at any time.

Manufacturers names, part numbers, symbols or other references appearing in this

catalogue are used for reference for order of goods only.

TRADEMARK

The designated trademarks are registered marks of their respective owners and Meritor
and its affiliates are not commercially connected, affiliated, or associated with any of the
owners of such marks. The Meritor products presented herein are not endorsed or
authorised by any of the trademark owners.

COPYRIGHT

All rights reserved. The Euclid and Meritor logo(s) or any part or layout of the catalogue
cannot be printed or reproduced without written authorisation from Meritor.
 TABLE OF CONTENTS

KNORR CALIPERS
SB5000 ............................................................................................................................ 4
SB6000/7000 Types ........................................................................................................ 8
SN6000/7000 Types ...................................................................................................... 14

MERITOR CALIPERS
DX.195.39/40/51/52 Types ............................................................................................ 18
DX.225.21.1001K/1002K/1013K/1014K Types ............................................................. 24
D3 - LRG524/25/26/27/28/29/32/33/62/63/622/623 Types ........................................... 30
ELSA 1 - LRG586/587/588/589 Types .......................................................................... 34
ELSA 1 RADIAL - LRG542/43/70/71/90/91/632/633/642/643 Types ............................ 38
ELSA 2 - LRG572/573 Types ........................................................................................ 40
LM ELSA 195 - LRG702/703 Types .............................................................................. 44
C LISA - LRG554/555 Types ......................................................................................... 48
D LISA - LRG548/49/50/51/54/55/64/65/92/93/630/631 Types ..................................... 52
C & D DUCO - LRG536/537/552/553/560/561/596/597/598/599/648/649 Types .......... 56

WABCO CALIPERS
17.5” Type ..................................................................................................................... 60
19.5” Type ..................................................................................................................... 64
22.5” Type ..................................................................................................................... 68

CALIPER TOOL CASES ................................................................................. 70

NOTES ...................................................................................................................... 71

-3-
KNORR CALIPERS
SB5000 Type

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

34 x 80 mm 32 x 80
mm

145 mm 114 mm
80 mm
85 mm

ALSO
AVALABLE
150 mm
85 mm

ALSO
AVALABLE

-4-
KNORR CALIPERS
SB5000 Type

PART NO. CKSK.1 PART NO. CKSK.4

MAKER KNORR MAKER KNORR
OR PART NO. II328090062 OR PART NO. K000944
K01604
DESCRIPTION Guides & seals DESCRIPTION Tappets

APPLICATION All SB... APPLICATION All SB…

PART NO. CKSK.6 PART NO. CKSK.8

MAKER KNORR MAKER KNORR
OR PART NO. K000372 OR PART NO. -
K001532
DESCRIPTION Guides DESCRIPTION Complete
& seals (new) overhaul
APPLICATION All SB… APPLICATION All SB…
All SN...

PART NO. CKSK.8.1 PART NO. CKSK.12

MAKER KNORR MAKER KNORR
OR PART NO. - OR PART NO. -
DESCRIPTION Guides DESCRIPTION Chain
& seals
APPLICATION All SB… APPLICATION All SB5
All SN... All SN5

PART NO. CKSK.5 PART NO. CKSK.11.1

MAKER KNORR MAKER KNORR
OR PART NO. - OR PART NO. -
DESCRIPTION Outer boot DESCRIPTION Gear wheel
& steelcap adj. mechanism
APPLICATION All SB… APPLICATION All SB…
All SN... All SN...

PART NO. CKSK.14 PART NO. CKSK.13.3

MAKER KNORR MAKER KNORR
OR PART NO. - OR PART NO. -
DESCRIPTION Roller bearings DESCRIPTION Guides & Bush

APPLICATION All SB… APPLICATION SB5/6/7

MORE KITS NEXT PAGE

-5-
KNORR CALIPERS
SB5000 Type

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

34 x 80 mm 32 x 80
mm

145 mm 114 mm
80 mm
85 mm

ALSO
AVALABLE
150 mm
85 mm

ALSO
AVALABLE

-6-
KNORR CALIPERS
SB5000 Type

PART NO. CKSK.13.3B PART NO. CKSK.2.7

MAKER KNORR MAKER KNORR
OR PART NO. II368470064 OR PART NO. -
DESCRIPTION Guide, bush DESCRIPTION Caps & pad
& 1 screw retainer pins
APPLICATION SB5/6/7 APPLICATION All SB…
SN5/6/7 All SN...

PART NO. CKSK.10.8 PART NO. CKSK.10.5

MAKER KNORR MAKER KNORR
OR PART NO. - OR PART NO. -
DESCRIPTION Pinion shaft DESCRIPTION Adjusting
mechanism
APPLICATION SB5 APPLICATION SB5
SN5 SN5

PART NO. CKSK.13.4

MAKER KNORR
OR PART NO. K000698
DESCRIPTION Guide bush
Ø 35mm
screw & seal
APPLICATION All SB...

-7-
KNORR CALIPERS
SB6000/7000 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

34 x 80 mm 32 x 80
mm

85 mm
145 mm 114 mm 80 mm

ALSO
AVALABLE

150 mm
85 mm

ALSO
AVALABLE

ALSO
AVALABLE

-8-
KNORR CALIPERS
SB6000/7000 Types

PART NO. CKSK.1 PART NO. CKSK.14

MAKER KNORR MAKER KNORR
OR PART NO. II328090062 OR PART NO. -
DESCRIPTION Guides & seals DESCRIPTION Roller
bearings
APPLICATION All SB... APPLICATION All SB…

PART NO. CKSK.6 PART NO. CKSK.2.7

MAKER KNORR MAKER KNORR
OR PART NO. K000372 OR PART NO. -
K001532
DESCRIPTION Guides DESCRIPTION Caps & pad
& seals retainer pins
APPLICATION All SB… APPLICATION All SB…
All SN...

PART NO. CKSK.8.1 PART NO. CKSK.4

MAKER KNORR MAKER KNORR
OR PART NO. - OR PART NO. K000944
K01604
DESCRIPTION Guides DESCRIPTION Tappets
& seals
APPLICATION All SB… APPLICATION All SB...
All SN...

PART NO. CKSK.16.1 PART NO. CKSK.8

MAKER KNORR MAKER KNORR
OR PART NO. Euclid only OR PART NO. -
DESCRIPTION Plastic cover DESCRIPTION Complete
overhaul
APPLICATION SB6/7 series APPLICATION All SB…
SN6/7 series

PART NO. CKSK.10.3 PART NO. CKSK.17

MAKER KNORR MAKER KNORR
OR PART NO. - OR PART NO. -
DESCRIPTION Adjusting DESCRIPTION Bridge assy -
mechanism pistons
APPLICATION All SB… APPLICATION SB6/7 series
All SN...

MORE KITS NEXT PAGE

-9-
KNORR CALIPERS
SB6000/7000 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

34 x 80 mm 32 x 80
mm

85 mm
145 mm 114 mm 80 mm

ALSO
AVALABLE

150 mm
85 mm

ALSO
AVALABLE

ALSO
AVALABLE

- 10 -
KNORR CALIPERS
SB6000/7000 Types

PART NO. CKSK.16 PART NO. CKSK.11.1

MAKER KNORR MAKER KNORR
OR PART NO. Euclid only OR PART NO. -
DESCRIPTION Aluminium DESCRIPTION Gear wheel
cover adj mechanism
APPLICATION SB6/7 series APPLICATION All SB…
SN6/7 series All SN...

PART NO. CKSK.10.4 PART NO. MDP3087K

MAKER KNORR MAKER KNORR
OR PART NO. - OR PART NO. II380280062
DESCRIPTION Adjusting DESCRIPTION Brake pads
mechanism
APPLICATION All SB… APPLICATION SB7 series
SN7 series

PART NO. CKSK.11 PART NO. MDP3095K

MAKER KNORR MAKER KNORR
OR PART NO. - OR PART NO. II319880062
DESCRIPTION Chain DESCRIPTION Brake pads

APPLICATION SB6/7 series APPLICATION SB6 series

SN6/7 series SN6 series

PART NO. CKSK.5 PART NO. CKSK.18

MAKER KNORR MAKER KNORR
OR PART NO. - OR PART NO. -
DESCRIPTION Outer boot DESCRIPTION Lever
& steelcap (angle +12°)
APPLICATION All SB… APPLICATION SB7 series
All SN...

PART NO. CKSK.2.5 PART NO. CKSK.18.1

MAKER KNORR MAKER KNORR
OR PART NO. II19712004 OR PART NO. -
DESCRIPTION Pad retainer DESCRIPTION Lever
(angle +0°)
APPLICATION All SB… APPLICATION SB7 series
All SN...

MORE KITS NEXT PAGE

- 11 -
KNORR CALIPERS
SB6000/7000 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

34 x 80 mm 32 x 80
mm

85 mm
145 mm 114 mm 80 mm

ALSO
AVALABLE

150 mm
85 mm

ALSO
AVALABLE

ALSO
AVALABLE

- 12 -
KNORR CALIPERS
SB6000/7000 Types

PART NO. CKSK.13.1 PART NO. CKSK.10.1

MAKER KNORR MAKER KNORR
OR PART NO. - OR PART NO. -
DESCRIPTION Guide & bush DESCRIPTION Pinion shaft
Ø 35mm
APPLICATION SB5/6/7 APPLICATION All SB…
SN5/6/7 All SN...

PART NO. CKSK.13.2 PART NO. CKSK.15

MAKER KNORR MAKER KNORR
OR PART NO. - OR PART NO. -
DESCRIPTION Guide & bush DESCRIPTION Lever bearing
Ø 39mm
APPLICATION SB5/6/7 APPLICATION All SB...
SN5/6/7 All SN...

PART NO. CKSK.13.3 PART NO. CKSK.18.5

MAKER KNORR MAKER KNORR
OR PART NO. - OR PART NO. -
DESCRIPTION Guide & bush DESCRIPTION R/Kit screws

APPLICATION SB5/6/7 APPLICATION All SB...

SN5/6/7

PART NO. CKSK.13.3B PART NO. CKSK.1.1

MAKER KNORR MAKER KNORR
OR PART NO. II368470064 OR PART NO. II328090061
DESCRIPTION Guide, bush DESCRIPTION Guide seals
& 1 screw & boot
APPLICATION SB5/6/7 APPLICATION All SB...
SN5/6/7

PART NO. CKSK.2.8

MAKER KNORR
OR PART NO. Z001548
DESCRIPTION Top hexagonal
nut for grooved
adj mechanism
APPLICATION All SB...
All SN...

- 13 -
KNORR CALIPERS
SN6000/7000 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

34 x 80 mm

114 mm
85 mm

85 mm
ALSO
AVALABLE

ALSO
AVALABLE

- 14 -
KNORR CALIPERS
SN6000/7000 Types

PART NO. CKSK.3.2 PART NO. CKSK.8.1

MAKER KNORR MAKER KNORR
OR PART NO. K000472 OR PART NO. -
DESCRIPTION Guides & seals DESCRIPTION Guide & seals

APPLICATION SN6/7 series APPLICATION All SB…

All SN...

PART NO. CKSK.4.2 PART NO. CKSK.22

MAKER KNORR MAKER KNORR
OR PART NO. K001300 OR PART NO. -
DESCRIPTION Tappets DESCRIPTION Cover & gasket

APPLICATION All SN / NA / SK APPLICATION SN7 series

PART NO. CKSK.5 PART NO. CKSK.10.1

MAKER KNORR MAKER KNORR
OR PART NO. K001301 OR PART NO. -
DESCRIPTION Outer boots DESCRIPTION Pinion shaft
& steelcaps
APPLICATION All SB… APPLICATION All SB...
All SN... All SN...

PART NO. CKSK.2.5.1 PART NO. CKSK.11

MAKER KNORR MAKER KNORR
OR PART NO. II19712004 OR PART NO. -
DESCRIPTION Complete DESCRIPTION Chain
overhaul
APPLICATION SN6 APPLICATION SB6/7 series
SK7 SN6/7 series

PART NO. CKSK.16.1 PART NO. CKSK.16.1.R

MAKER KNORR MAKER KNORR
OR PART NO. K000944 OR PART NO. -
DESCRIPTION Plastic cover DESCRIPTION New plastic
cover
APPLICATION All SB… APPLICATION SN.7041/51
All SN... SN.7208/18

PART NO. CKSK.2.8

MAKER KNORR
OR PART NO. Z001548 MORE KITS NEXT PAGE
DESCRIPTION Top hexagonal
nut for grooved
adj mechanism
APPLICATION All SN...

- 15 -
KNORR CALIPERS
SN6000/7000 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

34 x 80 mm

114 mm
85 mm

85 mm
ALSO
AVALABLE

ALSO
AVALABLE

- 16 -
KNORR CALIPERS
SN6000/7000 Types

PART NO. CKSK.10.3 PART NO. CKSK.10.4

MAKER KNORR MAKER KNORR
OR PART NO. - OR PART NO. -
DESCRIPTION Adjusting DESCRIPTION Adjusting
mechanism mechanism
APPLICATION All SB... APPLICATION All SB…
All SN...

PART NO. CKSK.14.1 PART NO. CKSK.15

MAKER KNORR MAKER KNORR
OR PART NO. - OR PART NO. -
DESCRIPTION Roller bearing DESCRIPTION Lever bearing

APPLICATION All SN... APPLICATION All SB...

All SN...

PART NO. CKSK.11.1 PART NO. CKSK.3.3

MAKER KNORR MAKER KNORR
OR PART NO. - OR PART NO. -
DESCRIPTION Gear wheel DESCRIPTION Caps
adj mechanism
APPLICATION All SB… APPLICATION All SN...
All SN...

PART NO. CKSK.13.1 PART NO. CKSK.13.2

MAKER KNORR MAKER KNORR
OR PART NO. II19712004 OR PART NO. -
DESCRIPTION Guide & bush DESCRIPTION Guide & bush
Ø 35mm Ø 39mm
APPLICATION SB5/6/7 APPLICATION SB5/6/7
SN5/6/7 SN5/6/7

PART NO. CKSK.3.4 PART NO. CKSK.2.7

MAKER KNORR MAKER KNORR
OR PART NO. - OR PART NO. -
DESCRIPTION Sealing plug DESCRIPTION Caps & pad
retainer pins
APPLICATION SN5/6/7 APPLICATION All SB...
All SN...

- 17 -
MERITOR CALIPERS
DX.195.39/40/51/52 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 18 -
MERITOR CALIPERS
DX.195.39/40/51/52 Types

PART NO. MCK1 PART NO. MCK1171

MAKER MERITOR MAKER MERITOR
OR PART NO. MCK1168 OR PART NO. MCK1171
DESCRIPTION Shaft fittings DESCRIPTION Complete
overhaul
APPLICATION DX.195.39/40 APPLICATION DX.195.39/40
DX.195.51/52 DX.195.51/52

PART NO. CMSK.2.D PART NO. CMSK.2.B

MAKER MERITOR MAKER MERITOR
OR PART NO. DSB3 OR PART NO. -
DESCRIPTION Roller bearings DESCRIPTION Roller bearings
(complete) (light)
APPLICATION DX.195.39/40 APPLICATION DX.195.39/40
DX.195.51/52 DX.195.51/52

PART NO. MCK1192 PART NO. CMSK.2.H

MAKER MERITOR MAKER MERITOR
OR PART NO. MCK1192 OR PART NO. -
DESCRIPTION Boots, caps DESCRIPTION Stabiliser bar
& screws
APPLICATION DX.195.39/40 APPLICATION DX.195.39/40
DX.195.51/52 DX.195.51/52

PART NO. CMSK.2.F PART NO. CMSK.2.E

MAKER MERITOR MAKER MERITOR
OR PART NO. DSL5L OR PART NO. DSL5R
DESCRIPTION Adj. mechanism DESCRIPTION Adj. mechanism
(light) (light)
APPLICATION DX.195.40 APPLICATION DX.195.39
DX.195.51 DX.195.52

PART NO. CMSK.19 PART NO. CMSK.20

MAKER MERITOR MAKER MERITOR
OR PART NO. DSL6R OR PART NO. DSL6L
DESCRIPTION Bridge & tubes DESCRIPTION Bridge & tubes

APPLICATION DX.195.39 APPLICATION DX.195.40

DX.195.52 DX.195.51

MORE KITS NEXT PAGE

- 19 -
MERITOR CALIPERS
DX.195.39/40/51/52 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 20 -
MERITOR CALIPERS
DX.195.39/40/51/52 Types

PART NO. CMSK.9.1 PART NO. CMSK.9.2

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Push plate DESCRIPTION Push plate
(left) (right)
APPLICATION DX.195.40 APPLICATION DX.195.39
DX.195.51 DX.195.52

PART NO. MCK1294 PART NO. MCK1292

MAKER MERITOR MAKER MERITOR
OR PART NO. MCK1294 OR PART NO. MCK1292
DESCRIPTION Shaft fittings DESCRIPTION Adjuster sleeve
(with grease nipple) & thrust plate
APPLICATION DX.195.39/40 APPLICATION DX.195.40
DX.195.51/52 DX.195.51

PART NO. CMSK.19.1 PART NO. MCK1293

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. MCK1293
DESCRIPTION Bridge & DESCRIPTION Adjuster sleeve
inner bearing & thrust plate
APPLICATION DX.195.39/40 APPLICATION DX.195.39
DX.195.51/52 DX.195.52

PART NO. CMSK.19.2 PART NO. CMSK.20.2

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Pistons & DESCRIPTION Pistons &
pinions pinions
APPLICATION DX.195.39 APPLICATION DX.195.40
DX.195.52 DX.195.51

PART NO. CMSK.19.3 PART NO. MCK1154

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. MCK1154
DESCRIPTION Central fork DESCRIPTION Stabiliser
& pinion bar kit
APPLICATION DX.195.39/40 APPLICATION DX.195.39/40
DX.195.51/52 DX.195.51/52

MORE KITS NEXT PAGE

- 21 -
MERITOR CALIPERS
DX.195.39/40/51/52 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 22 -
MERITOR CALIPERS
DX.195.39/40/51/52 Types

PART NO. CMSK.2.GR PART NO. MCK1290

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. MCK1290
DESCRIPTION Shaft DESCRIPTION Adjusting
(with grease nipple) mechanism (full)
APPLICATION DX.195.39/40 APPLICATION DX.195.40
DX.195.51/52 DX.195.51

PART NO. CMSK.2.J PART NO. MCK1291

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. MCK1291
DESCRIPTION Bracket DESCRIPTION Adjusting
seal & pin mechanism (full)
APPLICATION DX.195.39/40 APPLICATION DX.195.39
DX.195.51/52 DX.195.52

PART NO. MDPDX195 PART NO. MDP5076

MAKER MERITOR MAKER MERITOR
OR PART NO. MDPDX195 OR PART NO. MDP5076
DESCRIPTION Pad kit DESCRIPTION Pad kit

APPLICATION DX.195.39/40 APPLICATION DX.195.51/52

PART NO. 3218N1366 PART NO. MBR5079

MAKER MERITOR MAKER MERITOR
OR PART NO. 3218N1366 OR PART NO. MBR5079
DESCRIPTION Rotor DESCRIPTION Rotor
(Mack/Kenworth) ROR - TM
APPLICATION DX.195.39/40 APPLICATION DX.195.51/52

PART NO. MBR9018

MAKER MERITOR
OR PART NO. MBR9018
DESCRIPTION Rotor
ROR - LM & LC
APPLICATION DX.195.51/52

- 23 -
MERITOR CALIPERS
DX.225.21.1001K/1002K/1013K/1014K Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 24 -
MERITOR CALIPERS
DX.225.21.1001K/1002K/1013K/1014K Types

PART NO. MCK1 PART NO. MCK1171

MAKER MERITOR MAKER MERITOR
OR PART NO. MCK1168 OR PART NO. MCK1171
DESCRIPTION Shaft fittings DESCRIPTION Complete
overhaul
APPLICATION DX.225.21. APPLICATION DX.225.21.
1001K/1002K 1001K/1002K
1013K/1014K 1013K/1014K

PART NO. CMSK.2.D PART NO. CMSK.2.B

MAKER MERITOR MAKER MERITOR
OR PART NO. DSB3 OR PART NO. -
DESCRIPTION Roller bearings DESCRIPTION Roller bearings
(complete) (light)
APPLICATION DX.225.21. APPLICATION DX.225.21.
1001K/1002K 1001K/1002K
1013K/1014K 1013K/1014K

PART NO. MCK1192 PART NO. CMSK.2.H

MAKER MERITOR MAKER MERITOR
OR PART NO. MCK1192 OR PART NO. -
DESCRIPTION Boots, caps DESCRIPTION Stabiliser bar
& screws
APPLICATION DX.225.21. APPLICATION DX.225.21.
1001K/1002K 1001K/1002K
1013K/1014K 1013K/1014K

PART NO. CMSK.2.F PART NO. CMSK.2.E

MAKER MERITOR MAKER MERITOR
OR PART NO. DSL5L OR PART NO. DSL5R
DESCRIPTION Adj. mechanism DESCRIPTION Adj. mechanism
(light) (light)
APPLICATION DX.225.21. APPLICATION DX.225.21.
1001K/1013K 1002K/1014K

PART NO. CMSK.19 PART NO. CMSK.20

MAKER MERITOR MAKER MERITOR
OR PART NO. DSL6R OR PART NO. DSL6L
DESCRIPTION Bridge & tubes DESCRIPTION Bridge & tubes

APPLICATION DX.225.21. APPLICATION DX.225.21.

1002K/1014K 1001K/1013K

MORE KITS NEXT PAGE

- 25 -
MERITOR CALIPERS
DX.225.21.1001K/1002K/1013K/1014K Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 26 -
MERITOR CALIPERS
DX.225.21.1001K/1002K/1013K/1014K Types

PART NO. CMSK.9.1 PART NO. CMSK.9.2

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Push plate DESCRIPTION Push plate
(left) (right)
APPLICATION DX.225.21. APPLICATION DX.225.21.
1001K/1013K 1002K/1014K

PART NO. MCK1294 PART NO. MCK1292

MAKER MERITOR MAKER MERITOR
OR PART NO. MCK1294 OR PART NO. MCK1292
DESCRIPTION Shaft fittings DESCRIPTION Adjuster sleeve
(with grease nipple) & thrust plate
APPLICATION DX.225.21. APPLICATION DX.225.21.
1001K/1002K 1001K/1013K
1013K/1014K

PART NO. CMSK.19.1 PART NO. MCK1293

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. MCK1293
DESCRIPTION Bridge & DESCRIPTION Adjuster sleeve
inner bearing & thrust plate
APPLICATION DX.225.21. APPLICATION DX.225.21.
1001K/1002K
1013K/1014K
1002K/1014K

PART NO. CMSK.19.2 PART NO. CMSK.20.2

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Pistons & DESCRIPTION Pistons &
pinions pinions
APPLICATION DX.225.21. APPLICATION DX.225.21.
1002K/1014K 1001K/1013K

PART NO. CMSK.19.3 PART NO. MCK1159

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. MCK1159
DESCRIPTION Central fork DESCRIPTION Stabiliser
& pinion bar kit
APPLICATION DX.225.21. APPLICATION DX.225.21.
1001K/1002K 1001K/1002K
1013K/1014K 1013K/1014K

MORE KITS NEXT PAGE

- 27 -
MERITOR CALIPERS
DX.225.21.1001K/1002K/1013K/1014K Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 28 -
MERITOR CALIPERS
DX.225.21.1001K/1002K/1013K/1014K Types

PART NO. CMSK.2.GR PART NO. MCK1290

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. MCK1290
DESCRIPTION Shaft DESCRIPTION Adjusting
(with grease nipple) mechanism (full)
APPLICATION DX.225.21. APPLICATION DX.225.21.
1001K/1002K
1013K/1014K
1001K/1013K

PART NO. CMSK.2.J PART NO. MCK1291

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. MCK1291
DESCRIPTION Bracket DESCRIPTION Adjusting
seal & pin mechanism (full)
APPLICATION DX.225.21. APPLICATION DX.225.21.
1001K/1002K 1002K/1014K
1013K/1014K

PART NO. 23123615002 PART NO. 16160001001

MAKER MERITOR MAKER MERITOR
OR PART NO. 23123615002 OR PART NO. 16160001001
DESCRIPTION Rotor (new design DESCRIPTION Hub & rotor (old
hex head bolt) (design allen head)

APPLICATION DX.225.21. APPLICATION DX.225.21.

1001K/1002K 1001K/1002K
1013K/1014K 1013K/1014K

PART NO. KIT225020

MAKER MERITOR
OR PART NO. KIT225020
DESCRIPTION Pad kit

APPLICATION DX.225.21.
1001K/1002K
1013K/1014K

- 29 -
D3 - MERITOR CALIPERS
LRG524/25/26/27/28/29/32/33/62/63/622/623 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 30 -
D3 - MERITOR CALIPERS
LRG524/25/26/27/28/29/32/33/62/63/622/623 Types

PART NO. 0&. PART NO. SJ1212

MAKER MERITOR MAKER MERITOR
OR PART NO. SJ4001 OR PART NO. SJ1212
DESCRIPTION Guides & seals DESCRIPTION Cover & boots

APPLICATION LRG524/25/26/27/28 APPLICATION LRG524/25/26/27/28

/29/32/33/622/623 /29/32/33/622/623

PART NO. CMSK.24 PART NO. CMSK.25

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Shaft (left) DESCRIPTION Shaft (right)

APPLICATION LRG524 APPLICATION LRG525

LRG526 LRG527

PART NO. CMSK.28 PART NO. CMSK.29

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Shaft (left) DESCRIPTION Shaft (right)

APPLICATION LRG528 APPLICATION LRG529

PART NO. CMSK.24.1 PART NO. CMSK.25.

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Shaft support DESCRIPTION Shaft support

APPLICATION LRG524/26/28 APPLICATION LRG525/27/29

/32/622 /33/623

PART NO. CMSK.24.3 PART NO. CMSK.25.3

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Clutch DESCRIPTION Clutch
system (left) system (right)
APPLICATION LRG524/26/28 APPLICATION LRG525/27/29
/32/622 /33/623

MORE KITS NEXT PAGE

- 31 -
D3 - MERITOR CALIPERS
LRG524/25/26/27/28/29/32/33/62/63/622/623 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 32 -
D3 - MERITOR CALIPERS
LRG524/25/26/27/28/29/32/33/62/63/622/623 Types

PART NO. CMSK.24.4 PART NO. CMSK.25.4

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Adjuster DESCRIPTION Adjuster
tappet (left tappet (right)
APPLICATION LRG524/26/28 APPLICATION LRG525/27/29
/32/622

PART NO. CMSK.24.5 PART NO. CMSK.25.5

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Small clutch DESCRIPTION Small clutch
system (left) system (right)
APPLICATION LRG524/26/28 APPLICATION LRG525/27/29
/32/622 /33/623

PART NO. CMSK.24.6 PART NO. CMSK.24.7

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Wavy washer DESCRIPTION Shaft roller
bearing
APPLICATION LRG524/25/26/27/28 APPLICATION LRG524/25/26/27/28
/29/32/33/622/623 /29/32/33/622/623

PART NO. CMSK.24.2 PART NO. CMSK.24.8

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. 68320507PK10
DESCRIPTION Thrust ball DESCRIPTION Cover
bearing
APPLICATION LRG524/25/26/27/28 APPLICATION LRG528/29
/29/32/33/622/623

PART NO. CMSK.24.9 PART NO. CMSK.24.10

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. Euclid only
DESCRIPTION Bush & seals DESCRIPTION Screws for main
body (M16 x 1.5 L50)
APPLICATION LRG528/29 APPLICATION LRG528/29

- 33 -
ELSA 1 - MERITOR CALIPERS
LRG586/587/588/589 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 34 -
ELSA 1 - MERITOR CALIPERS
LRG586/587/588/589 Types

PART NO. SJ4112 PART NO. MCK1102

MAKER MERITOR MAKER MERITOR
OR PART NO. SJ4112 OR PART NO. MCK1102
DESCRIPTION Half bearing DESCRIPTION Guides &
bushes
APPLICATION LRG586/87 APPLICATION LRG588/89
/88/89

PART NO. 68322562PK4 PART NO. 68322563PK4

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Small gear DESCRIPTION Small gear
mechanism (left) mechanism (right)
APPLICATION LRG589 APPLICATION LRG588

PART NO. 68321678PK10 PART NO. MCK1102

MAKER MERITOR MAKER MERITOR
OR PART NO. 68321678PK10 OR PART NO. MCK1102
DESCRIPTION Locking shim DESCRIPTION Guides
& bushes
APPLICATION LRG588/89 APPLICATION LRG586/87

PART NO. CMSK.5.6 PART NO. CMSK.5.7

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. Euclid only
DESCRIPTION Adj. mechanism DESCRIPTION Adj. mechanism
& tappets (left) & tappets (right)
APPLICATION LRG586 APPLICATION LRG587

PART NO. ST1156

MAKER MERITOR
OR PART NO. ST1156
DESCRIPTION Tappet cover

APPLICATION LRG586/87

MORE KITS NEXT PAGE

- 35 -
ELSA 1 - MERITOR CALIPERS
LRG586/587/588/589 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 36 -
ELSA 1 - MERITOR CALIPERS
LRG586/587/588/589 Types

PART NO. CMSK.5.9 PART NO. CMSK5.10

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. Euclid only
DESCRIPTION Adj. mech DESCRIPTION Adj. mech
clutch syst (left) clutch syst (right)
APPLICATION LRG586 APPLICATION LRG587

PART NO. CMSK.5.14 PART NO. CMSK.5.15

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. Euclid only
DESCRIPTION Operating shaft DESCRIPTION Operating shaft
(lever) (left) (lever) (right)
APPLICATION LRG586 APPLICATION LRG587

PART NO. CMSK.5.11 PART NO. CMSK.5.12

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. Euclid only
DESCRIPTION Spring retainers DESCRIPTION Spring retainers
thrust (left) thrust (right)
APPLICATION LRG586 APPLICATION LRG587

PART NO. 68322300PK10 PART NO. CMSK.5.17

MAKER MERITOR MAKER MERITOR
OR PART NO. 68322300PK10 OR PART NO. Euclid only
DESCRIPTION Seals & caps DESCRIPTION Bolt
M14 x 1.5 L90
APPLICATION LRG586/87 APPLICATION LRG586/87

PART NO. CMSK.5.16 PART NO. CMSK.24.10

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. Euclid only
DESCRIPTION 10 x Bush DESCRIPTION Screws for main
35 x 39 x 30 body (M16 x 1.5 L50)
APPLICATION LRG586/87 APPLICATION LRG586/87

- 37 -
ELSA 1 RADIAL - MERITOR CALIPERS
LRG542/43/70/71/90/91/632/633/642/643 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 38 -
ELSA 1 RADIAL - MERITOR CALIPERS
LRG542/43/70/71/90/91/632/633/642/643 Types

PART NO. SJ4112 PART NO. MCK1102

MAKER MERITOR MAKER MERITOR
OR PART NO. SJ4112 OR PART NO. MCK1102
DESCRIPTION Half bearing DESCRIPTION Guides
& bushes
APPLICATION LRG542/43/70/71/90 APPLICATION LRG542/43/70/71/90
/91/632/633/642/643 /91/632/633/642/643

PART NO. 68321678PK10 PART NO. ST1156

MAKER MERITOR MAKER MERITOR
OR PART NO. 68321678PK10 OR PART NO. ST1156
DESCRIPTION Locking shim DESCRIPTION Tappet cover

APPLICATION LRG542/43/70/71/90 APPLICATION LRG542/43/70/71/90

/91/632/633/642/643 /91/632/633/642/643

PART NO. CMSK.5.6 PART NO. CMSK.5.7

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Adj. mechanism DESCRIPTION Adj. mechanism
2 tappers (left)
APPLICATION LRG542/70/90 APPLICATION LRG543/71/91
/632/642 /633/643

PART NO. CMSK.5.9 PART NO. CMSK.5.10

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Adj. mechanism DESCRIPTION Adj. mechanism
clutch syst. (left) clutch syst. (right)
APPLICATION LRG542/70/90 APPLICATION LRG543/70/91
/632/642 /633/643

PART NO. CMSK.5.11 PART NO. CMSK.5.12

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Spring retainers DESCRIPTION Spring retainers
thrust (left) thrust (right)
APPLICATION LRG542/43/70/71/90 APPLICATION LRG542/43/70/71/90
/91/632/633/642/643 /91/632/633/642/643

PART NO. CMSK.5.13

MAKER MERITOR
OR PART NO. -
DESCRIPTION Seals & caps

APPLICATION LRG542/43/70/71/90
/91/632/633/642/643

- 39 -
ELSA 2 - MERITOR CALIPERS
LRG572/573 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 40 -
ELSA 2 - MERITOR CALIPERS
LRG572/573 Types

PART NO. MCK1234 PART NO. MCK1309

MAKER MERITOR MAKER MERITOR
OR PART NO. MCK1234 OR PART NO. MCK1309
DESCRIPTION Guide & pin DESCRIPTION Tappets

APPLICATION LRG572/73 APPLICATION LRG572/73

PART NO. MCK1244 PART NO. MDP5073

MAKER MERITOR MAKER MERITOR
OR PART NO. MCK1244 OR PART NO. MDP5073
DESCRIPTION Seals DESCRIPTION Pad kit

APPLICATION LRG572/73 APPLICATION LRG572/73

PART NO. CMSK.7.4 PART NO. MBR9004

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. MBR9004
DESCRIPTION Adj. mechanism DESCRIPTION Rotor
sealing
APPLICATION LRG572/73 APPLICATION LRG572/73

PART NO. CMSK.7.11.4 PART NO. CMSK.7.11.3

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. Euclid only
DESCRIPTION Adjusting DESCRIPTION Adjusting
device device
APPLICATION LRG572 APPLICATION LRG573

PART NO. CMSK.7.5 PART NO. CMSK.7.6

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. Euclid only
DESCRIPTION Adjusting DESCRIPTION Tappet system
mechanism
APPLICATION LRG572/73 APPLICATION LRG572/73

MORE KITS NEXT PAGE

- 41 -
ELSA 2 - MERITOR CALIPERS
LRG572/573 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 42 -
ELSA 2 - MERITOR CALIPERS
LRG572/573 Types

PART NO. CMSK.7.9 PART NO. SJ4112

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. SJ4112
DESCRIPTION Adj. mechanism DESCRIPTION Bearings
(central part)
APPLICATION LRG572/73 APPLICATION LRG572/73

PART NO. MCK1139 PART NO. CMSK.7.12

MAKER MERITOR MAKER MERITOR
OR PART NO. MCK1139 OR PART NO. Euclid only
DESCRIPTION Adjuster DESCRIPTION Plug retain
tappets cover (access adj device)

APPLICATION LRG572/73 APPLICATION LRG572/73

PART NO. CMSK.7.13 PART NO. CMSK.7.8

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. Euclid only
DESCRIPTION Clutch system DESCRIPTION Central ring

APPLICATION LRG572/73 APPLICATION LRG572/73

PART NO. 68322655PK10 PART NO. MCK1174

MAKER MERITOR MAKER MERITOR
OR PART NO. 68322655PK10 OR PART NO. MCK1174
DESCRIPTION Adjuster stem DESCRIPTION Pad retainer
dust
APPLICATION LRG572/73 APPLICATION LRG572/73

PART NO. 68323746PK10 PART NO. MCK1088

MAKER MERITOR MAKER MERITOR
OR PART NO. 68323746PK10 OR PART NO. MCK1088
DESCRIPTION Actuator seal DESCRIPTION Operating seals

APPLICATION LRG572/73 APPLICATION LRG572/73

PART NO. CMSK.5.16 PART NO. MCK1240

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. MCK1240
DESCRIPTION 10 x Bush DESCRIPTION Visual wear
35 x 39 x 30 pad assembly
APPLICATION LRG572/73 APPLICATION LRG572/73

- 43 -
LM ELSA 195 - MERITOR CALIPERS
LRG702/703 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 44 -
LM ELSA 195 - MERITOR CALIPERS
LRG702/703 Types

PART NO. MCK1254 PART NO. CMSK.7.6

MAKER MERITOR MAKER MERITOR
OR PART NO. MCK1254 OR PART NO. -
DESCRIPTION Guide pin, DESCRIPTION Tappets system
seals & screws
APPLICATION LRG702/03 APPLICATION LRG702/03

PART NO. CMSK.7.9 PART NO. CMSK.7.4

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Adj. mechanism DESCRIPTION Adj. mechanism
(central part) sealing
APPLICATION LRG702/03 APPLICATION LRG702/03

PART NO. CMSK.7.11.2 PART NO. 68323746PK10

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. 68323746PK10
DESCRIPTION Adjusting device DESCRIPTION Actuator seal
(right)
APPLICATION LRG702/03 APPLICATION LRG702/03

PART NO. SJ4112 PART NO. MCK1139

MAKER MERITOR MAKER MERITOR
OR PART NO. SJ4112 OR PART NO. -
DESCRIPTION Bearings DESCRIPTION Shaft support

APPLICATION LRG702/03 APPLICATION LRG702/03

PART NO. 68322655PK10 PART NO. MCK1309

MAKER MERITOR MAKER MERITOR
OR PART NO. 68322655PK10 OR PART NO. MCK1309
DESCRIPTION Adjuster stem DESCRIPTION Tappets
dust
APPLICATION LRG702/03 APPLICATION LRG702/03

MORE KITS NEXT PAGE

- 45 -
LM ELSA 195 - MERITOR CALIPERS
LRG702/703 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 46 -
LM ELSA 195 - MERITOR CALIPERS
LRG702/703 Types

PART NO. 68323746PK10 PART NO. CMSK.7.13

MAKER MERITOR MAKER MERITOR
OR PART NO. 68323746PK10 OR PART NO. Euclid only
DESCRIPTION Actuator seal DESCRIPTION Clutch system

APPLICATION LRG702/03 APPLICATION LRG702/03

PART NO. CMSK.5.16 PART NO. CMSK.7.8

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. Euclid only
DESCRIPTION 10 x Bush DESCRIPTION Central ring
35 x 39 x 30
APPLICATION LRG702/03 APPLICATION LRG702/03

PART NO. CMSK.7.11.1 PART NO. CMSK.7.11.2

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. Euclid only
DESCRIPTION Adjusting device DESCRIPTION Adjusting device
(new models) (old models)
APPLICATION LRG702/03 APPLICATION LRG702/03

PART NO. MCK1088 PART NO. MDP5093

MAKER MERITOR MAKER MERITOR
OR PART NO. MCK1088 OR PART NO. MDP5093
DESCRIPTION Operating seals DESCRIPTION Pad kit

APPLICATION LRG702/03 APPLICATION LRG702/03

PART NO. MBR9018

MAKER MERITOR
OR PART NO. MBR9018
DESCRIPTION Rotor

APPLICATION LRG702/03

- 47 -
C LISA - MERITOR CALIPERS
LRG554/555 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 48 -
C LISA - MERITOR CALIPERS
LRG554/555 Types

PART NO. 6- PART NO. 6-

MAKER MERITOR MAKER MERITOR
OR PART NO. MCK4114 OR PART NO. MCK4113
DESCRIPTION Adj. mechanism DESCRIPTION Adj. mechanism
(right) (left)
APPLICATION LRG555 APPLICATION LRG554

PART NO. SJ4074 PART NO. SJ4073

MAKER MERITOR MAKER MERITOR
OR PART NO. SJ4074 OR PART NO. SJ4073
DESCRIPTION Adjuster tappet DESCRIPTION Adjuster tappet
(right) (left)
APPLICATION LRG555 APPLICATION LRG554

PART NO. MCK1022/1152 PART NO. MCK1021/1151

MAKER MERITOR MAKER MERITOR
OR PART NO. MCK1022/1152 OR PART NO. MCK1021/1151
DESCRIPTION Operating shaft DESCRIPTION Operating shaft
(right) (left)
APPLICATION LRG555 APPLICATION LRG554

PART NO. SJ4031

MAKER MERITOR
OR PART NO. SJ4031
DESCRIPTION Needle & roller
bearings
APPLICATION LRG554/55

MORE KITS NEXT PAGE

- 49 -
C LISA - MERITOR CALIPERS
LRG554/555 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 50 -
C LISA - MERITOR CALIPERS
LRG554/555 Types

PART NO. CMSK.11.1 PART NO. CMSK.12.1

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Shaft DESCRIPTION Shaft

APPLICATION LRG554 APPLICATION LRG555

PART NO. CMSK.11.2 PART NO. CMSK.12.2

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Shaft base DESCRIPTION Shaft base

APPLICATION LRG554 APPLICATION LRG555

PART NO. CMSK.11.3 PART NO. CMSK.11.4

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Balls DESCRIPTION Spring

APPLICATION LRG554/555 APPLICATION LRG554/555

PART NO. CMSK.5.17 PART NO. CMSK.54.1

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. SJ4061
DESCRIPTION Bolt DESCRIPTION Boot & seals

APPLICATION LRG554/555 APPLICATION LRG554/555

If you detect any errors in this catalogue, please let us

know. We want the information to be as accurate as
possible and appreciate your assistance in this.

Please advise us of any corrections or comments on:

Phone: 03 8353 6050, or Fax: 03 8353 6060.

- 51 -
D LISA - MERITOR CALIPERS
LRG548/49/50/51/54/55/64/65/92/93/630/631 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 52 -
D LISA - MERITOR CALIPERS
LRG548/49/50/51/54/55/64/65/92/93/630/631 Types

PART NO. SJ4078 PART NO. SJ4076

MAKER MERITOR MAKER MERITOR
OR PART NO. SJ4078 OR PART NO. SJ4076
DESCRIPTION Boot & seals DESCRIPTION Guides, pins
& sleeves
APPLICATION LRG548/49/50 APPLICATION LRG548/49/50
/51 /51/54/55

PART NO. SJ4113 PART NO. SJ4114

MAKER MERITOR MAKER MERITOR
OR PART NO. SJ4113 OR PART NO. SJ4114
DESCRIPTION Adj. mechanism DESCRIPTION Adj. mechanism
(left) (right)
APPLICATION LRG548/50/54 APPLICATION LRG549/51/54
/64/92/630 /65/93/631

PART NO. SJ4073 PART NO. SJ4074

MAKER MERITOR MAKER MERITOR
OR PART NO. SJ4073 OR PART NO. SJ4074
DESCRIPTION Adjuster tappet DESCRIPTION Adjuster tappet
(left) (right)
APPLICATION LRG548/50/54 APPLICATION LRG549/51/54
/64/92/630 /65/93/631

PART NO. MCK1151 PART NO. MCK1152

MAKER MERITOR MAKER MERITOR
OR PART NO. MCK1151 OR PART NO. MCK1152
DESCRIPTION Operating shaft DESCRIPTION Operating shaft
(left) (right)
APPLICATION LRG548/50/54 APPLICATION LRG549/51/54
/64/92 /65/93

PART NO. SJ4031

MAKER MERITOR
OR PART NO. SJ4031
DESCRIPTION Needle & roller
bearings
APPLICATION LRG548/49/50
/51/54/55/64/65
/92/93/630/631

MORE KITS NEXT PAGE

- 53 -
D LISA - MERITOR CALIPERS
LRG548/49/50/51/54/55/64/65/92/93/630/631 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 54 -
D LISA - MERITOR CALIPERS
LRG548/49/50/51/54/55/64/65/92/93/630/631 Types

PART NO. CMSK.11.1 PART NO. CMSK.12.1

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Shaft DESCRIPTION Shaft

APPLICATION LRG548/50/54 APPLICATION LRG549/51/54

/64/92/630 /65/93/631

PART NO. CMSK.11.2 PART NO. CMSK.12.2

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Shaft base DESCRIPTION Shaft base

APPLICATION LRG548/50/54 APPLICATION LRG549/51/54

/64/92/630 /65/93/631

PART NO. CMSK.11.3 PART NO. CMSK.11.4

MAKER MERITOR MAKER MERITOR
OR PART NO. - OR PART NO. -
DESCRIPTION Balls DESCRIPTION Spring

APPLICATION LRG548/49 APPLICATION LRG548/49/50

/51/54/55/64/65

PART NO. CMSK.5.16 PART NO. CMSK.5.17

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. Euclid only
DESCRIPTION 10 x bush DESCRIPTION Bolt
35 x 39 x 30
APPLICATION LRG548/49/64 APPLICATION LRG548/49
/65/92/93

- 55 -
C & D DUCO - MERITOR CALIPERS
LRG536/537/552/553/560/561/596/597/598/599/648/649 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 56 -
C & D DUCO - MERITOR CALIPERS
LRG536/537/552/553/560/561/596/597/598/599/648/649/652/653 Types

PART NO. MCK1134 PART NO. MCK1067

MAKER MERITOR MAKER MERITOR
OR PART NO. MCK1134 OR PART NO. MCK1067
DESCRIPTION Guide pins DESCRIPTION Intermediate
gear & spring
APPLICATION LRG536/537/552 APPLICATION LRG536/537/560
/553/648/649 /561/648/649

PART NO. SJ4096/97 PART NO. MCK1299

MAKER MERITOR MAKER MERITOR
OR PART NO. SJ4096/97 OR PART NO. MCK1299
DESCRIPTION Operating shaft DESCRIPTION Guide pin bolt
lever (left/right) & dust cover
APPLICATION LRG536/37 APPLICATION LRG536/537/552
/553/560/561/648/649
/596/597

PART NO. 68324854PK10 PART NO. MCK1238

MAKER MERITOR MAKER MERITOR
OR PART NO. 68324854PK10 OR PART NO. MCK1238
DESCRIPTION Tappet dust DESCRIPTION Tappet head
cover
APPLICATION LRG536/537/552 APPLICATION LRG536/537/552
/553/560/561/648/649 /553/648/649

PART NO. MCK1264 PART NO. MCK1236/37

MAKER MERITOR MAKER MERITOR
OR PART NO. MCK1264 OR PART NO. MCK1236/37
DESCRIPTION Pad retainer DESCRIPTION Adjusting tappet
mech (left/right)
APPLICATION LRG536/537/552 APPLICATION LRG536/537/560/561
/553/560/561/648/649 /597/598/648/649

PART NO. CMSK7.12 PART NO. MCK1067

MAKER MERITOR MAKER MERITOR
OR PART NO. Euclid only OR PART NO. MCK1067
DESCRIPTION Plug retain DESCRIPTION Intermediate
(access adj. device) gear & spring
APPLICATION LRG536/537 APPLICATION LRG536/537
/652/653 /652/653

MORE KITS NEXT PAGE

- 57 -
C & D DUCO - MERITOR CALIPERS
LRG536/537/552/553/560/561/596/597/598/599/648/649/652/653 Types

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 58 -
C & D DUCO - MERITOR CALIPERS
LRG536/537/552/553/560/561/596/597/598/599/648/649/652/653 Types

PART NO. SJ4111 PART NO. SJ4112

MAKER MERITOR MAKER MERITOR
OR PART NO. SJ4111 OR PART NO. SJ4112
DESCRIPTION Visual pad DESCRIPTION Bearings
Wear assembly
APPLICATION LRG536/37/52/53 APPLICATION LRG536/37/52/53/60
/61/96/97/98/99
/60/61/648/49 /648/49/52/53

PART NO. SJ4105 PART NO. 68322655PK10

MAKER MERITOR MAKER MERITOR
OR PART NO. SJ4105 OR PART NO. 68322655PK10
DESCRIPTION Cover plate seal DESCRIPTION Adjuster
stem dust
APPLICATION LRG536/537/560 APPLICATION LRG536/37/52/53
/561/648/649 /60/61/648/49

PART NO. SJ4102 PART NO. SJ4103

MCK1111 MCK1112
MAKER MERITOR MAKER MERITOR
OR PART NO. SJ4102 OR PART NO. SJ4103
MCK1111 MCK1112
DESCRIPTION Automatic adj. DESCRIPTION Automatic adj.
(anti-clockwise) (clockwise)
APPLICATION LRG536/652 APPLICATION LRG537/653

PART NO. 68322563PK4 PART NO. 68322562PK4

MAKER MERITOR MAKER MERITOR
OR PART NO. 68322563PK4 OR PART NO. 68322562PK4
DESCRIPTION Small gear DESCRIPTION Small gear
mechanism mechanism
APPLICATION LRG536/652 APPLICATION LRG537/653

PART NO. 68322900PK10

MAKER MERITOR
OR PART NO. 68322900PK10
DESCRIPTION Tappet anti
rotation plate
APPLICATION LRG536/537
/560/561

- 59 -
WABCO CALIPERS
17.5” Type

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 60 -
WABCO CALIPERS
17.5” Type

PART NO. CWSK.2 PART NO. CWSK.7

MAKER WABCO MAKER WABCO
OR PART NO. 12 999 699 OR PART NO. 12 999 704
DESCRIPTION Guide & seals DESCRIPTION Seals & boots

APPLICATION 40 175 058/59/60 APPLICATION 40 175 062/63

/61/70/71/72/73 /64/65

PART NO. CWSK.8 PART NO. CWSK.3

MAKER WABCO MAKER WABCO
OR PART NO. 12 999 580 OR PART NO. 12 999 729
DESCRIPTION Seals & boots DESCRIPTION Guide & seals

APPLICATION 40 175 025/26/27 APPLICATION 40 100 001/02/03

/28/49/50/51/52 04/05/06

PART NO. CWSK.11 PART NO. CWSK.10

MAKER WABCO MAKER WABCO
OR PART NO. 844 503 503 2 OR PART NO. 844 503 024 2
DESCRIPTION Boot & caps DESCRIPTION Guide, seals
& boots
APPLICATION 640 175 074 APPLICATION 640 175 074
/75/76/77 /75/76/77

PART NO. CWSK.17.1 PART NO. CWSK.17.2

MAKER WABCO MAKER WABCO
OR PART NO. - OR PART NO. -
DESCRIPTION Boots & seals DESCRIPTION Guides &
screws
APPLICATION 40 175 051/52 APPLICATION 40 175 051/52
40 175 070/71 40 175 070/71

PART NO. CWSK.17.3 PART NO. CWSK.17.5

MAKER WABCO MAKER WABCO
OR PART NO. - OR PART NO. -
DESCRIPTION Push plate DESCRIPTION Push plate
(left) (right)
APPLICATION 40 175 051 APPLICATION 40 175 052
40 175 070 40 175 071

MORE KITS NEXT PAGE

- 61 -
WABCO CALIPERS
17.5” Type

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 62 -
WABCO CALIPERS
17.5” Type

PART NO. CWSK.12.4 PART NO. CWSK.12

MAKER WABCO MAKER WABCO
OR PART NO. - OR PART NO. 12 999 704
DESCRIPTION Joint & seals DESCRIPTION Half bearings

APPLICATION 40 160… APPLICATION 40 160…

40 175…/195... 40 175…/195...

PART NO. CWSK.12.3 PART NO. CWSK.12.1

MAKER WABCO MAKER WABCO
OR PART NO. - OR PART NO. -
DESCRIPTION Lever & pin DESCRIPTION Adjusting
mechanism
APPLICATION 40 160… APPLICATION -
40 175…/195...

PART NO. CWSK.12.2

MAKER WABCO
OR PART NO. -
DESCRIPTION Adj mechanism
& bridge
APPLICATION -

- 63 -
WABCO CALIPERS
19.5” Type

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 64 -
WABCO CALIPERS
19.5” Type

PART NO. CWSK.23 PART NO. CWSK.5

MAKER WABCO MAKER WABCO
OR PART NO. 12 999 738VT OR PART NO. 12 999 746
DESCRIPTION Guides & seals DESCRIPTION Guides
& seals
APPLICATION 40 195 001/02 APPLICATION 40 195 007/08/09
40 195 003/04 40 195 010/11

PART NO. CWSK.6 PART NO. CWSK.19.1

MAKER WABCO MAKER WABCO
OR PART NO. 12 999 776 OR PART NO. -
DESCRIPTION Guides & seals DESCRIPTION Boots, seals
& caps
APPLICATION 40 195 017/18 APPLICATION 40 195...

PART NO. CWSK.19.2 PART NO. CWSK.12.1

MAKER WABCO MAKER WABCO
OR PART NO. - OR PART NO. -
DESCRIPTION Guides & DESCRIPTION Adj. mechanism
screws
APPLICATION 40 195... APPLICATION -

PART NO. CWSK.19.3 PART NO. CWSK.19.5

MAKER WABCO MAKER WABCO
OR PART NO. - OR PART NO. -
DESCRIPTION Push plate DESCRIPTION Push plate
(left) (right)
APPLICATION 40 195 001 APPLICATION 40 195 002
40 195 017 40 195 018

MORE KITS NEXT PAGE

- 65 -
WABCO CALIPERS
19.5” Type

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 66 -
WABCO CALIPERS
19.5” Type

PART NO. CWSK.12 PART NO. CWSK.12.3

MAKER WABCO MAKER WABCO
OR PART NO. - OR PART NO. -
DESCRIPTION Half bearings DESCRIPTION Lever & pin

APPLICATION 40 195... APPLICATION 40 195...

PART NO. CWSK.12.4 PART NO. CWSK.4

MAKER WABCO MAKER WABCO
OR PART NO. - OR PART NO. -
DESCRIPTION Joint and seals DESCRIPTION Guide pin kit

APPLICATION 40 195... APPLICATION -

PART NO. CWSK.12.2

MAKER WABCO
OR PART NO. -
DESCRIPTION Adj mechanism
& bridge
APPLICATION -

- 67 -
WABCO CALIPERS
22.5” Type

TYPICAL EXPLODED VIEW OF MOST KEY MODELS ARE EXPOSED HERE, TO HELP YOU TO CHOOSE CORRECT REPAIR KITS.

- 68 -
WABCO CALIPERS
22.5” Type

PART NO. CWSK.1 PART NO. CWSK.9

MAKER WABCO MAKER WABCO
OR PART NO. 12 999 678 OR PART NO. 12 999 677
DESCRIPTION Guide & seals DESCRIPTION Seal & boot

APPLICATION 40 225 003 APPLICATION 40 225 003

40 225 004 40 225 004

PART NO. CWSK.6 PART NO. CWSK.12.4

MAKER WABCO MAKER WABCO
OR PART NO. - OR PART NO. 12 999 677
DESCRIPTION Guide pin kit DESCRIPTION Guides & seals

APPLICATION - APPLICATION -

- 69 -
CALIPER TOOL CASES

PART NO. CKSK.21 PART NO. CKSK.21.2

MAKER KNORR MAKER KNORR
OR PART NO. ZB9032 OR PART NO. Z003934
DESCRIPTION Caliper tool DESCRIPTION Additional tool
case
APPLICATION All SB... APPLICATION All SB...
All SN... All SN...

PART NO. CKSK.22

MAKER MERITOR
OR PART NO. MBT1000
MST 1000
DESCRIPTION Meritor tool
kit
APPLICATION -

- 70 -
NOTES

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

- 71 -
NOTES

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

......................................................................................................................................................................................................

- 72 -
Meritor Heavy Vehicle Systems Australia Limited
50 Calarco Drive
DERRIMUT VIC 3030
AUSTRALIA
Phone: (613) 8353 6050 Fax: (613) 8353 6060
E-mail: cvaau.sales@meritor.com
www.xpresswayplus.com

DISC BRAKE CALIPER REPAIR KITS

E105.2011.V1