Paper 2011
Paper 2011
Paper 2011
: _____________
As part of the requirements for the NEBOSH International General Certificate (IGC), candidates are
required to undertake a health and safety inspection of part of a workplace and to write a report to
management detailing the findings and recommendations. Full details of the procedures, including the
selection of a suitable area, will be provided during the course but, in brief, the requirements are that:
the health and safety practical application takes place within 7 days before and after of the
date of the written papers;
The practical is to be completed at the students own workplace. Those without a workplace
will be assisted by the Training Provider.
the time allowed to complete the assessment is not restricted but candidates should aim to
complete the inspection and the report in two hours.
the practical application may be submitted in the candidate’s own handwriting or be word
processed;
candidates do not require supervision when carrying out the practical application but the
candidate must sign a declaration that the submission is their own work. (Page 2 of this
document). If this declaration is not submitted the candidate’s result may be declared void. A
signature can be electronic or can be faxed.
completed observation sheets covering a number and range of hazards and good practice ,
identifying suitable control measures and timescales;
conclusions which summaries the main issues identified in the candidate’s workplace
I declare that the work submitted for this practical application assessment ie. the completed
observation sheets and the report to management, is my own work. I recognise that contravention of
this statement constitutes malpractice and may result in my being subject to the penalties set out in
the NEBOSH Malpractice policy.
I declare that the work marked is identical to that received from the candidate. I recognise that
contravention of this statement constitutes malpractice and may result in my being subject to the
penalties set out in the NEBOSH Malpractice policy.
I declare that I have marked this work and am both qualified and approved by NEBOSH to do so. I
recognise that contravention of this statement constitutes malpractice and may result in my being
subject to the penalties set out in the NEBOSH Malpractice policy.
NB: This declaration must be completed in full, submitted and retained with the candidate’s
script. If this declaration is not submitted the candidate’s result may be declared void.
INTERNATIONAL GENERAL
CERTIFICATE Assessor’s marking sheet
(2011 specification)
NEBOSH
Maximum
Assessor’s moderated
marks
Criteria available
marks awarded marks
(if different)
The mark sheet must be retained by the Course Provider and sent to NEBOSH only if requested.
Student number_________________________________
Executive Summary
Observation 1 (Weakness):
One worker were found working on height without wearing safety harness. actually he is
fixing the suspended platform support on the roof. There is no proper supervision from the
safety officer. This type of unsafe act can risk the life of worker.
Strength:
When safety officer saw this worker he stop the work. Give him warning with fine. And
give all of worker safety induction on working on heights. And guide them to right use of
safety belt.
Observation 2 (Weakness) :
4 worker were found while removing the scaffold in bulding stairs. They were droping the
scaffold components plywood and pipes in the stairs. There is no supervision for this unsafe
act no warning sign area was not barricaded. this type of unsafe act can produce the risk of
trip and fall & and injured the person.
Strength :
This staircase should be closed for the people barricade with warning tape & should
place the warning signs after removing scaffold should be remove all scaffold material from
the stairs
Observation 3 (Weakness):
Electrical Cables were found tray led on the floor and in some area the cables were
trayed with the roof but not properly fix with roof. And Electrical distribution boards were
found open with no warning sign Electrical Equipment & machine were found without Earth
line (like, Tower Crane, generator & steel cutting and bending machine, ElCB, MCB) which is
very dangerous act which can risk the employees life.
Strength:
Electrical cables should be trayeld with roof and Should arrange the Electrician who
should check the Electrical Equipment & and should remove the faulty Equipment from the
site conduct safety induction for the workers on working with Electrical Equipments.
Observation 4(Weakness):
Conclusions
Location:
Date of Review:
Executive Summary:
The inspection report shows that there are some high risk hazards are in
the site which required immediate actions. In which the Electricity is major hazard
which have significant risk to the employees if not properly use. Poorly maintained
Electrical machines & power tools can produce the risk of electrocution, over loaded
Electrical Equipment can produce fire hazard. So should be check the all electrical
equipment by a competent person. Repair all the faulty equipments.
Another major issue I have discussed is working on height. Many people’s are
seriously injured or kill as the result of falling from heights. So all platform scaffolding
Should be provided with guardrail system
MANAGEMENT REPORT
Location:
Date of Review:
MANAGEMENT REPORT
Location:
Date of Review:
MANAGEMENT REPORT
Location:
Date of Review:
MANAGEMENT REPORT
Location:
Date of Review:
MANAGEMENT REPORT
Location:
Date of Review:
MANAGEMENT REPORT
Location:
Date of Review: