Mtcna Example Test
Mtcna Example Test
Mtcna Example Test
2048
4094
2047
3. A network ready device is directly connected to a MikroTik RouterBOARD 750 with a correct
U.T.P. RJ45 functioning cable. The device is configured with an IPv4 address of 192.168.100.70
using a subnet mask of 255.255.255.252. What will be a valid IPv4 address for the
RouterBOARD 750 for a successful connection to the device?
192.168.100.69/255.255.255.252
192.168.100.68/255.255.255.252
192.168.100.70/255.255.255.252
192.168.100.71/255.255.255.252
Interface Address
MAC Address
FQDN Address
7. A PC with IP 192.168.1.2 can access internet, and static ARP has been set for that IP address
on gateway. When the PC Ethernet card failed, the user change it with a new card and set the
same IP for it.
Old static ARP entry on gateway has to be updated for the new card
MAC-address of the new card has to be changed to MAC address of old card
UDP
ARP
TCP
15.242.55.33-15.242.55.62
15.242.55.31-15.242.55.62
15.242.55.33-15.242.55.63
G2:60:CF:21:99:H0
192.168.0.0/16
AEC8:21F1:AA44:54FF:1111:DDAE:0212:1201
Layer 1
Layer 3
Layer 6
Layer 2
13. How many layers does Open Systems Interconnection model have?
5
12
14. If ARP=reply-only is enabled on one router interface, router can add dynamic ARP entries
for the particular interface.
True
False
15. In MikroTik RouterOS, Layer-3 communication between 2 hosts can be achieved by using an
address subnet of:
/32
/31
/29
/30
88:0C:00:99:5F:EF
EA:BA:AA:EE:FF:CB
95:B5:DD:EE:78:8A
80:GF:AA:67:13:5D
18. Which computers would be able to communicate directly (without any routers involved)
192.168.0.5/26 and 192.168.0.100
UDP 162
TCP 25
TCP 162
TCP 123
UDP 161
IP:192.168.1.223/24 gateway:248.115.148.136
IP:192.168.2.253/24 gateway:202.168.0.1
IP:192.168.2.2/24 gateway:202.168.125.45
10.110.50.37
192.168.0.1
11.63.72.21
172.28.73.21