B-Line Clamps PDF
B-Line Clamps PDF
B-Line Clamps PDF
WARNING
All hanger products in this catalog should be installed and serviced only as illustrated or described. Do not use them
for any purpose other than those described in this catalog. Products that are used for unintended purposes could fail,
resulting in severe personal injury or death.
Examples of misapplications which could cause severe personal injury or death include, but are not limited to:
• Using a beam clamp on a beam other than those described in the catalog;
• Using concrete inserts as anchors for pulling pipe up to the required elevation;
• Suspending clevis hangers, one under another, which could result in an accumulative load that is
greater than that which the pipe hanger will support.
Eaton B-Line series pipe hanger and support products are manufactured in accordance with industry standards. Our
customers should exercise care in using these products properly as to avoid potential damage or injury. Contact us if
you have any questions about proper installation and use of the products in this catalog.
NOTICE
Eaton reserves the right to change the specifications, materials, equipment, prices or the availability of
products at any time without prior notice. While every effort has been made to assure the accuracy of
information contained in this catalog at the time of publication, Eaton is not responsible for inaccuracies
resulting from undetected errors or omissions.
SINCE
1924
B-Line Division
509 West Monroe Street
Highland, Illinois 62249-0326
Phone: 800-851-7415 www.eaton.com/b-lineseries
Pictorial Index
B351L B3036L B3362 thru B3365
Steel C-Clamp Malleable Iron Retaining Strap B3037 B3031-3/8
With Locknut C-Clamp Page 29 Light Duty B3033
Z-Purlin Beam Clamp
Page 28 With Locknut Malleable C-Clamp Wide Jaw
Page 29
Page 28 Page 30 Top Flange
C-Clamp
Page 30
B3054
Malleable Iron
B3040 B312 B3055 Beam Clamp
Adjustable Beam Clamp Retaining Strap B3050 Steel Beam Clamp Page 42
Page 39 Page 39 Beam Clamp Page 41
Page 40
Fig. 1CBS
Clevis Pipe Spacer B3100C B3100F B3102
B3100 Felt Lined AWWA
Page 48 Plastic Coated
Standard Standard Clevis Hanger B3108
Standard
X
Clevis Hanger Clevis Hanger Page 52 Extended
Clevis Hanger
Pages 49 & 50 Page 51 Clevis Hanger
Page 51
Page 53
B3690 B3690F
B3690C B3109
Adjustable 'J' Felt Lined
Plastic Coated Flat Top Clevis
Hanger Adjustable 'J' Hanger
Adjustable 'J' Hanger Hanger
Page 54 Page 54
Page 54 Page 55
B3106V
B3106 Plastic Pipe B3104C
B3104 B3104F
Vee Bottom Support Channel Plastic Coated
Light Duty Felt Lined
Clevis Hanger Page 56 Light Duty
Clevis Hanger Light Duty
Page 56
Page 57 X Clevis Hanger Clevis Hanger
Page 57 Page 57
B3104CT B3104CTC
Copper Tubing Plastic Coated
Copper Tubing B3170CT B3170CTC
Light Duty Clevis
Copper Tubing Copper Tubing
u
Hanger Light Duty Clevis
u Page 59 u
Hanger Adjustable Swivel Ring Plastic Coated
Page 58
Page 59 u
Page 58 Adjustable Swivel Ring
u DURA-COPPER™ Finish
X Available in DURA GREEN™ Finish (Other hangers may be available with the DURA-GREEN finish, contact factory)
Pictorial Index
Fig. 200
Fig. 200 H
Trimline Adjustable
Heavy Duty
Band Hanger
Band Hanger
Page 60
Page 61
B3198R
Fig. 200F Extension
Felt Lined Split Pipe Clamp
Trimline Adjustable B3198H
Page 62
Band Hanger Hinged Extension
Split Pipe Clamp B3198RCT
Page 60
Page 62 Copper Tubing
Extension
Page 63 u
Split Pipe Clamp
Fig. 200C B3198HCT
Plastic Coated Copper Tubing
Trimline Adjustable Hinged Extension
Page 63 u
Band Hanger Split Pipe Clamp
Page 60
B3191
B3175CT Straight 'J' Hook
B3175
Copper Tubing B3190 Page 65
Ring and Bolt Hanger
Page 64 u
Ring and Bolt Hanger Offset 'J' Hook
Page 64
Page 65
Fig. 120W
Fig. 120MJ
Wrap Around
Mutt & Jeff
Fig. 120RWA Fig. 120 ‘U’ Hanger
‘U’ Hanger
Retrofit Wrap Around ‘U’ Hanger Page 68 B3262
Page 68
“U” Hanger Clamp Page 67 Light Duty
Page 66 Spring Hanger
Page 69
u DURA-COPPER™ Finish
B3373C
Plastic Coated B3373CT
Standard Riser Clamp Copper Tubing
Page 73 u
Page 72 Riser Clamp
B3373F
Felt Lined B3373CTC
B3373 Standard Riser Clamp Copper Tubing
Standard Riser Clamp Page 72 Plastic Coated
Page 73 u
Page 72 Riser Clamp
B3132
B3134
Two-Bolt
Four-Bolt Fig. 4A
Underground Clamp B3140
Underground Clamp Pipe Clamp for
Page 74 Standard Pipe Clamp
Page 75 Sway Bracing Pages 77-78 B3140C
Page 76
Plastic Coated
Standard Pipe Clamp
Pages 77-78
B3132W B3134W
Lug Washer Washer
Page 74 Page 75
B3140F
Felt Lined
Standard Pipe B3142
Clamp B3141 Heavy Duty Pipe Clamp
Pages 77-78 A.W.W.A. Pipe Clamp Page 80
Page 79 B3144
Double Bolt Pipe Clamp
Pages 81 & 82
Pictorial Index
B1999 Fig. 22 Fig. 22L2
ISO Fig. 23
Vibra Cushion Single Fastener One Hole Hanger/Restraint
ISO-PIPE™ Double Fastener
Page 94 CPVC Strap For CPVC & Steel Pipe
Page 94 CPVC Strap
Page 95 Page 96
Page 97
B3184
Fig. 29 Light Duty BPRC Series BPIC Series
Double Offset Offset Hanger & Rod Mount BPSC Series
Hanger & Restrainer Restrainer for KWIK-CLIP Channel Mount
for CPVC Pipe CPVC & IPS Pipe Page 105 KWIK-CLIP
Page 103 Page 104 Page 106
B3114
B3110 B3122
Pipe Roll With Sockets B3122A
Adjustable Steel Adjustable Roller Support
Page 109
Page 108 X
Yoke Pipe Roll Adjustable Double
Page 110
Roller Guide
X Available in DURA GREEN™ Finish Page 111
B3120
Roller Chair B3124
Page 112 Roller Support B3126
Page 113 Roller Support B218
Page 114 Pipe Rollers
Page 115
B479
B219 B379 B3117SL
Pipe Rollers
Pipe Rollers Pipe Rollers Steel Roller Stand
Page 118
Page 116 Page 117 Page 119
B3118SL B3119SL
Adjustable Roller Stand Roller With Steel B3114R B3117R
B3264
With Base Plate Base Plate Long Pipe Roll Only Short Pipe Roll Only
Spring Cushion Hanger
Page 120 Page 121 Page 123 Page 124
Page 122
B3088 B3088T
B3380 Threaded Base Stand B3089
Base Stand B3090
thru B3384 Pipe Support
360° Calcium B3088S B3088ST Pipe Saddle
B3096 Adjuster
Silicate Shield Seismic Base Stand Seismic Threaded Support
Adjustable Pipe Page 130
Page 126 Pages 127 & 128 Base Stand With U-Bolt
Pages 127 & 128 Saddle Support Pages 131 & 132
Page 129
B3094
B3095 B3092 B3093 B3097 B3098 Flange Support
Pipe Saddle Support Adjustable Pipe Saddle Adjustable Pipe Pipe Saddle Adjustable Pipe Page 141
Pages 133 & 134 Support With Yoke Saddle Support With Strap Support w/U-Bolt
Pages 135 & 136 Pages 137 & 138 Page 139 Page 140
Pictorial Index
B3195 B3281 thru
I.P.S. Isolator B3287
B3195CT Pipe Alignment
Copper Tubing Guide B3147A
Isolator Pages B3147B
Page 142 143 & 144 Anchor Chairs B3160 thru B3165
B2417
Pages 145 & 146 Pipe Covering
Pipe Guides
Protection Saddle
Page 145
Pages 157 - 162
B3257
B3256 Base Plate
Hold-Down Page 148 B3891 thru B3897 B3991 thru B3993
Pipe Slides Pipe Slides B3151 B3153
Anchor Clamp Insulation
Pages 149 - 152 Pages 153 - 156 Insulation Protection
Page 147 Protection Shield Shield With Tabs
Page 164 Page 164
Fig. 800
Adjustable Sway Fig. 825
Fig. 4B Fig. 4L
Brace Attachment Bar Joist Sway
Pipe Clamp For Longitudinal “In-Line”
To Steel Brace Attachment
Fig. 4A Sway Bracing Sway Brace
Page 177 Page 178
Pipe Clamp For Page 173 Attachment Fig. 4LA
Sway Bracing Page 174 Longitudinal “In-Line”
Page 172 Sway Brace
Attachment
Pages 175 & 176
Fig. 909
Fig. 907 No-Thread Swivel
Fig. 825A Fig. 828 Fig. 906
4-Way Sway Brace
Bar Joist Sway Universal Sway Sway Brace Multi-
Longitudinal Sway Attachment
Brace Attachment Brace Attachment Fastener Adaptor
Brace Attachment Page 183
Page 179 Page 180 Page 181
Page 182
Fig. 910
Swivel Sway Brace
Attachment
Fig. 980 Fig. 981
Page 184
Universal Swivel Fast-Attach
Sway Brace Universal Swivel Sway Fig. 985 Fig. 986
Fig. 975 Brace Attachment
Attachment Mechanical Fast Mechanical Fast
Straight Sway Page 187
Page 186 Clamp Clamp
Brace Fitting
Page 185 Page 188 Page 188
Fig. BRC CABLE
Pre-Stretched
Aircraft Cable
Page 189
Fig. 990 Fig. 991 Fig. 1000 Fig. 1001 Fig. 2002
Cable Sway Brace Fast Attach Fast Clamp Sway Brace Sway Brace
Attachment Cable Sway Brace Sway Brace Attachment Attachment
Page 190 Attachment Attachment Page 193 Page 194
Page 191 Page 192
Concrete Inserts
B2501
Light Duty
Spot Insert
Pages 198
B3019
Adjustable Metal
Deck Ceiling Bolt Fig. 109A
Page 196 B2499 Concrete Deck Insert
Heavy Duty Spot Insert Pages 197
Page 196
N2500
B3014 B3014N B2505 thru
B2500 Steel Insert Nut
Malleable Iron Malleable Iron Insert Nut B2508
Light Duty Spot Insert Page 199
Spot Insert Page 200 Spot Insert
Page 199
Page 200 Page 201
Pictorial Index
BE-5-8
B2503 B22I, B32I, B52I BD40 BE-9-12
Heavy Duty Spot Insert Continuous Concrete Inserts Fastener Clip Fastener Clip
Page 202 Pages 203 - 205 Page 206 Page 206
BRACKETS
B3068 B3066
B3064 B3067
Light Duty Welded B3065 Medium Duty
Adjustable Strut Heavy Duty
Bracket Light Duty Welded Welded Bracket
Bracket Welded Bracket
Page 208 Bracket Page 211
Page 209 Page 212
Page 210
B3069W B3069E
Welded Knee Brace “O” Bracket
Page 213 Page 213
Upper Attachments
B3060L
Side Beam
Angle Clip
Page 217
B3199 Fig. 78
B3199CT
Ceiling Flange All Steel Ceiling Plate
Dura-Copper Coated
Page 216 Page 216
u
Ceiling Flange
Page 216
B3061
Fig. 51NFPA Fig. 50
B3070 B3060 Angle Bracket
Side Beam Bracket for Side Beam Bracket For NFPA
Reversible Angle Clip Side Beam Angle Clip Page 219
NFPA Rod Rod & Fastener Sizing
Page 217 Page 218 Page 219
Page 218
u DURA-COPPER™ Finish
B-Line series Pipe Hangers & Supports 12 Eaton
Pictorial Index
Upper Attachments (Continued)
Pictorial Index
Threaded Accessories
B3188C
Plastic Coated
B3188 Standard U-Bolt
B501 Standard U-Bolt Pages 233 & 234
B3222 B3200 Light Weight U-Bolt Pages 233 & 234
Eye Socket Weldless Eye Nut Page 232
Page 230 Page 231
B3224
Hanger Adjuster
B3203
B3223 B3224CT B3202
Extension Piece
B3201 Offset Eye Socket Dura-Copper Coated Turnbuckle
Page 236
Page 237 u
Forged Steel Clevis Page 236 Hanger Adjuster Page 237
Page 235
u DURA-COPPER™ Finish
Pictorial Index
B3210
Eye Rod B3210X
B3205
Page 241 Linked Eye Rod
Machine Threaded Rod ATR Page 242
Page 238 All Threaded Rod
Page 238
B3214
Tie Bolt
Page 240
B3211
Welded Eye Rod
241
B3211X
Fig. 98 Linked Welded Eye Rod
Rod Stiffener Fig. 98B Page 242
Page 239 Rod Stiffener with
Break Off Bolt Head
Page 239 B3213
SC228 Coach Screw Rod
Rod Stiffener Page 240
Page 239
B655
Steel Rod Coupling
B3212
Page 244
J-Bolt
Page 243 B656
Steel Reducer
B3228 DS 16 x 2
Rod Coupling
Hex Head Lag Bolt #16 x 2"
Page 244
Page 243 Drive Screw
Page 243
B3220 B200
Malleable Iron Square Washer B3248
Rod Coupling Page 245 Steel Washer Plate
HN - Hex Nut
Page 245 Page 246 B3234 HHN - Heavy Hex Nut
Bevel Washer Page 247
Page 246
AWA
FW LW FFW ATB Wedge Anchor
Flat Washer Lock Washer Flat Fender Washer Toggle Bolt Page 249
Page 248 Page 248 Page 248 Page 249
Pictorial Index
DBP & DBM DB Series
DB6 Series DB10 Series
Bases Base & Short Channel
Base & Tall Channel Double Base & Long Channel
Page 280 Page 281
Page 282 Page 283
DB__DS Series
DBM Series Bases & Harness
Base & Clamp Riser Assembly
Page 284 Pages 285 & 286
DBR Series
Base & Fixed Height
Roller Assembly
Page 287
KwikWire™ System
BKL & BKLK Series BKH & BKHK Series BKYH & BKYHK Series BKB & BKBK Series BKA & BKAK Series
Loop Termination Single Hook Termination Double Hook Bolt Termination Angle Bracket
Page 298 Page 299 Termination Page 301 Termination
Page 300 Page 302
The B-Line series metal framing support system is designed with many
time-saving features. Fully adjustable and reusable, with a complete line of
channels, fittings, and accessories for multi-purpose applications.
SELECTION CHART
for Channels, Materials and Hole Patterns
Strut Systems
Information
Channel Nuts
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 17 B-Line series Pipe Hangers & Supports
Strut Systems
Below are some basic clamp and cushions to be used with a strut system. For the industry's most complete
line of strut and strut fittings, refer to B-Line series Strut Systems catalog.
B2000 Series
BVT & BVP
NE
B-LI50 P
Series
BVP12”.I.
1 1/
Vibra-Clamp™
B1999
For Copper Tubing & OD Sizes Vibra-Cushion™
O.D. Pipe Clamps • Inhibits Galvanic Reaction
Strut Systems
Catalog Copper & Steel Nominal
Information
No. OD Tubing Size Copper Size • Reduces Sound & Vibration
Part O.D. Size Mat'l
No. (Outside Dia.) Ga. BVT025 1/4" (6.3) -- -- • Used on refrigeration, HVAC, copper
BVT037 3/8" (9.5) 1/4" (6) tubing, glass pipes & hydraulic lines
B2023 1/4" (6.3) 16
BVT050 1/2" (12.7) 3/8" (10) Available in 20 Ft. rolls.
B2024 3/8" (9.5) 16
BVT062 5/8" (15.9) 1/2" (15)
B2025 1/2" (12.7) 16 For Rigid Conduit or Iron Pipe
BVT075 3/4" (19.0) 5/8" (17)
B2026 5/8" (15.9) 16
BVT087 7/8" (22.2) 3/4" (20) Nominal Length of Use
B2027 3/4" (19.0) 16
BVT100 1" (25.4) -- -- Size Vibra-Cushion Clamp No.
B2028 7/8" (22.2) 16
BVT112 11/8" (28.6) 1" (25) 3/8" (10) 21/8" (54.0) B2002
B2029 1" (25.4) 14
BVT125 11/4" (31.7) -- -- 1/2" (15) 25/8" (66.7) B2009
B2030 11/8" (28.6) 14
BVT137 13/8" (34.9) 11/4" (32) 3/4" (20) 31/4" (82.5) B2031
B2031 11/4" (31.7) 14
BVT150 11/2" (38.1) -- -- 1" (25) 41/8" (104.8) B2004
B2032 13/8" (34.9) 14
BVT162 15/8" (41.3) 11/2" (40) 11/4" (32) 53/16" (131.8) B2012
B2004 11/2" (38.1) 14
BVT175 13/4" (44.4) -- -- 11/2" (40) 515/16" (150.8) B2038
B2011 15/8" (41.3) 14
BVT187 17/8" (47.6) -- -- 2" (50) 71/2" (190.5) B2042
B2005 13/4" (44.4) 12
BVT200 2" (50.8) -- -- 21/2" (65) 9" (228.6) B2046
B2036 17/8" (47.6) 12
BVT212 21/8" (54.0) 2" (50) 3" (80) 11" (279.4) B2051
B2037 2" (50.8) 12
BVT225 21/4" (57.1) -- -- 31/2" (90) 121/2" (317.5) B2055
B2038 21/8" (54.0) 12
BVT250 21/2" (63.5) -- -- 4" (100) 141/2" (368.3) B2059
B2039 21/4" (57.1) 12
BVT262 25/8" (66.7) 21/2" (65) 5" (125) 177/16" (442.9) B2067
B2013 23/8" (60.3) 12
BVT300 3" (76.2) -- -- 6" (150) 203/4" (527.0) B2116
B2041 21/2" (63.5) 12
BVT312 31/8" (79.4) 3" (80)
B2042 25/8" (66.7) 12
BVT362 35/8" (92.1) 31/2" (90) For Thinwall (EMT) Conduit
B2043 23/4" (69.8) 12
BVT400 4" (101.6) -- --
B2014 27/8" (73.0) 12 Nominal Length of Use
BVT412 41/8" (104.8) 4" (100)
B2045 3" (76.2) 12 Size Vibra-Cushion Clamp No.
BVT612 61/8" (155.6) 6" (150)
B2046 31/8" (79.4) 12 3/8"
Available for tubing and pipe sizes (10) 113/16" (46.0) B2027
B2047 31/4" (82.5) 12 1/2"
1/4" to 6", OD sizes 1/4" to 65/8". (15) 23/16" (58.7) B2002
B2048 33/8" (85.7) 12 3/4" (20) 27/8" (73.0) B2003
B2015 31/2" (88.9) 12 Easy one tool installation, dampens
1" (25) 35/8" (92.1) B2032
B2050 35/8" (92.1) 11 vibration and noise, secures tubing 11/4" (32) 43/8" (120.6) B2036
B2051 33/4" (95.2) 11 firmly, and protects against galvanic 11/2" (40) 57/16" (138.1) B2012
B2016 4" (101.6) 11 reaction. 2" (50) 67/8" (174.6) B2013
B2054 41/8" (104.8) 11
B2055 41/4" (107.9) 11 Stainless Steel available
B2056 43/8" (111.1) 11 For Thinwall (EMT) Conduit
B2017 41/2" (114.3) 11 For Pipe Sizes Nominal Length of Use
B2058 45/8" (117.5) 11 Size Vibra-Cushion Clamp No.
B2059 43/4" (120.6) 11 Catalog Nominal 1/4" (6) 13/16" (30.2) B2026
B2060 47/8" (123.8) 11 No. Pipe Size 3/8" (10) 19/16" (39.7) B2027
B2061 5" (127.0) 11 BVP025 1/4" (6) 1/2" (15) 17/8" (47.6) B2028
B2062 51/8" (130.2) 11 BVP037 3/8" (10) 5/8" (17) 25/16" (58.7) B2029
B2063 51/4" (133.3) 11 BVP050 1/2" (15) 3/4" (20) 23/4" (69.8) B2030
B2064 53/8" (136.5) 11 BVP075 3/4" (20) 1" (25) 31/2" (88.9) B2032
B2065 51/2" (139.7) 11 BVP100 1" (25) 11/4" (32) 45/16" (109.5) B2011
BVP125 11/4" (32) 11/2" (40) 51/8" (130.2) B2036
BVP150 11/2" (40) 2" (50) 611/16" (169.9) B2013
BVP200 2" (50) 21/2" (65) 81/4" (209.5) B2014
BVP250 21/2" (65) 3" (80) 913/16" (249.2) B2048
BVP300 3" (80) 31/2" (90) 113/8" (288.9) B2052
BVP350 31/2" (90) 4" (100) 1215/16" (328.6) B2056
BVP400 4" (100) 5" (125) 61/8" (409.6) B2064
BVP500 5" (125) 6" (150) 191/4" (488.9) B2112
BVP600 6" (150) 8" (200) 251/2" (647.7) B2128
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 18 Eaton
Technical Data
MATERIALS FINISHES
Carbon Steel Zinc Coatings
Carbon steel is used in the Protective zinc coatings are available Cut edges and welded areas are
manufacture of B-Line series pipe on a number of pipe hangers and not zinc coated; however, zinc near the
hangers and supports. Excellent accessories in three basic forms: uncoated metal becomes a
strength characteristics and Electro-galvanized, pre-galvanized, and sacrificial anode which protects the
adaptability to cold forming provide hot-dip galvanized after fabrication. In bare areas after a short period of time.
a well engineered design. By cold all cases, the zinc protects the steel Pre-galvanized steel is not
forming the steel, mechanical first as a sacrificial anode to repair bare generally recommended for use
properties are increased, adding areas on cut edges and gouges. outdoors in industrial environments,
to the structural integrity of the but is suitable for extended exposure
When exposed to air and moisture, zinc
fabricated hanger. in dry or mildly corrosive atmospheres.
forms a tough, adherent protective film
consisting of a mixture of zinc oxides,
Stainless Steel Hot-Dip Galvanized After
hydroxides, and carbonates. The
AISI Type 304 and Type 316 are corrosion resistance of zinc is directly Fabrication (ASTM A123)
non-magnetic members of the related to its thickness and the After a pipe hanger or fitting has been
Technical Data
austenitic stainless steel group. environment. For example a 0.2 mil fabricated, it is completely immersed in
Several conditions make the use of (5 μm) coating will last twice as long as a bath of molten zinc. A metallurgical
stainless steel ideal. These include a 0.1 mil (2.5 μm) coating in the same bond is formed, resulting in a zinc
reducing long term maintenance environment. coating that completely coats all
costs, high ambient temperatures, surfaces, including edges. Zinc
appearance, and stable structural Electro-Galvanized coatings of this specification have a
properties such as yield strength, minimum thickness of 1.50 ounces per
(ASTM B633 SC1 or SC3)
and high creep resistance. square foot (0.45 kg/m2) on each side
An electro-galvanized process deposits or a total of 3.0 ounces per square foot
a coating of zinc on the steel by (0.9 kg/m2) of steel.
electrolysis from a bath of zinc salts.
This coating is pure zinc and adheres Hot-dip galvanized after fabrication is
to the steel with a molecular bond. A recommended for outdoor exposure.
maximum of 0.5 mils (12.7 μm) of zinc For best results, a zinc rich paint
can be applied by this method. This (available from Eaton) should be applied
coating is recommended for in-door to field cuts. The zinc rich paint will pro-
use in relatively dry areas. vide immediate protection for field cuts
and eliminate the short time period for
Pre-Galvanized Zinc galvanic action to "heal" the damaged
coating.
(ASTM A653 Coating
Designation G90)
Plastic Coating
Pre-galvanized zinc is produced by
CORROSION continuously rolling the steel coils or Some products offered by Eaton are
sheets through molten zinc at the steel plastic or vinyl coated for prevention of
All metal surfaces exposed to the mills. This is also known as "mill- galvanic reaction between materials or
environment are affected by galvanized" or "hot-dipped mill for noise reduction. These coated
corrosion. Depending on the physical galvanized". Coils are then slit to size products can also be used where
properties of the metal and its for fabrication of pipe hangers. Coating contact between glass pipe and hanger
proximity to other dissimilar metals, thicknesses of G90, is 0.90 ounces per is not desirable. Felt lined hangers may
an electrochemical reaction may occur square foot (0.27 kg/m2) of steel be substituted for same purpose.
which causes an attack on the metal surface.
itself, resulting in corrosion. Chemical Red Primer
corrosion is limited to highly corrosive
environments, high temperatures, A corrosion resistant metal primer
or a combination of both. Zn containing rust inhibitive pigments.
ZnFe
Fe
ZnO
Technical Data
DURA-COPPER & DURA GREEN EPOXY COATING PROCESS
TANK 1 TANK 2 TANK 3 TANK 4 TANK 5 TANK 6 TANK 7 TANK 8 BAKE OVEN
Parts are Rinse is Phosphatized The material Deionized rinse The electro- The first The final rinse The curing
thoroughly applied to sealer is applied moves prepares the coating tank post rinse insures a process takes 20
cleaned and remove to insure through clear metal for the applies a removes any smooth, minutes at a
phospha- insoluble corrosion water rinse to cathodic uniform coat unelectrically nonblemish baking
tized. salts and resistance and remove excess electro-coating. of epoxy paint attracted finish. temperature of
unreacted paint adhesion. phosphates. to the entire solids. 375°F (199°C).
phosphates. surface.
General Information
Torque
The torque values in this catalog are to be used as a guide only. The relationship between the applied torque or
torque wrench reading and the actual tension created in the bolt may be substantially different. Important factors
affecting torque-tension relationships include friction under the bolt head or nut, hole tolerances, and torque
wrench tolerances. Accuracy of many commercial torque wrenches may vary as much as plus or minus 25%.
Charts and Tables
Charts and tables in this section are compiled from information published by nationally recognized organizations
and are intended for use as a guide only. Eaton recommends that users of this information determine the validity
of such information as applied to their own applications.
Eaton reserves the right to make specification changes without notice.
1.02 REFERENCES
A. ASTM B633 - Specification for Electrodeposited Coatings of Zinc on Iron and Steel.
B. ASTM A123 - Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products.
C. ASTM A653 - Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron
Alloy-Coated (Galvannealed) by the Hot-Dip Process.
Technical Data
D. ASTM A1011 - Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural,
High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability.
E. ANSI/MSS SP-58 - Manufacturers Standardization Society: Pipe Hangers and Supports -
Materials, Design, and Manufacture.
F. ANSI/MSS SP-69 - Manufacturers Standardization Society: Pipe Hangers and Supports -
Selection and Application.
G. NFPA 13 - Installation of Sprinkler Systems.
1.04 SUBMITTALS
A. Submit product data on all hanger and support devices, including shields and attachment
methods. Product data to include, but not limited to materials, finishes, approvals, load
ratings, and dimensional information.
Part II - PRODUCTS
2.01 ACCEPTABLE MANUFACTURERS
A. Manufacturer: Subject to compliance with these specifications, pipe hanger and support
systems shall be as manufactured by Eaton.
Technical Data
4. Insulated pipe - Cold or chilled water piping:
a. 5 inch and smaller pipes: use adjustable steel clevis with galvanized sheet metal
shield, B-Line series B3100 with B3151 or B3153 series.
b. 6 inch and larger pipes:
i. Adjustable steel yoke pipe, B-Line series B3110, with B3380CW - B3384CW
calcium silicate shield.
ii. Pipe roll with sockets, B-Line series B3114, with B3380CW - B3384CW calcium
silicate shield.
B. PIPE CLAMPS
1. When flexibility in the hanger assembly is required due to horizontal movement, use
pipe clamps with weldless eye nuts, B-Line series B3140 or B3142 with B3200. For insulated
lines use double bolted pipe clamps, B-Line series B3144 or B3146 with B3200.
D. WALL SUPPORTS
1. Pipes 4 inch and smaller:
a. Carbon steel hook, B-Line series B3191.
b. Carbon steel J-hanger, B-Line series B3690.
2. Pipes larger than 4 inch:
a. Welded strut bracket and pipe straps, B-Line series B3064 and B2000 series.
b. Welded steel brackets, B-Line series B3066 or B3067, with roller chair or adjustable
steel yoke pipe roll. B-Line series B3120 or B3110. Use pipe protection shield or
saddles on insulated lines.
E. FLOOR SUPPORTS
1. Hot piping under 6 inch and all cold piping:
a. Carbon steel adjustable pipe saddle and nipple attached to steel base stand sized
for pipe elevation, B-Line series B3093 and B3088T or B3090 and B3088. Pipe saddle
shall be screwed or welded to appropriate base stand.
2. Hot piping 6 inch and larger:
a. (Adjustable) Roller stand with base plate, B-Line series B3117SL (or B3118SL).
b. Adjustable roller support and steel support sized for elevation, B-Line series B3124
F. VERTICAL SUPPORTS
1. Steel riser clamp sized to fit outside diameter of pipe, B-Line series B3373.
B. CONCRETE INSERTS
1. Cast in place spot concrete inserts shall be used where applicable, either steel or
malleable iron body, B-Line series B2500 or B3014. Spot inserts shall allow for lateral
adjustment and have means for attachment to forms. Select insert nuts to suit
threaded hanger rod sizes, B-Line series N2500 or B3014N series.
B. For larger tubing or piping subjected to vibration, use neoprene or spring hangers
Technical Data
as required.
C. For base mounted equipment use vibration pads, molded neoprene mounts, or spring
mounts as required.
2.06 ACCESSORIES
A. Hanger rods shall be threaded both ends, B-Line series B3205, or continuous threaded rods
of circular cross section. Use adjusting locknuts at upper attachments and hangers.
No wire, chain, or perforated straps are allowed.
B. Shields shall be 180° galvanized sheet metal, 12 inch minimum length, 18 gauge minimum
thickness, designed to match outside diameter of the insulated pipe, B-Line series B3151.
C. Pipe protection saddles shall be formed from carbon steel, 1/8 inch minimum thickness,
sized for insulation thickness. Saddles for pipe sizes greater than 12 inch shall have a
center support rib.
2.07 FINISHES
INDOOR FINISHES
A. Hangers and clamps for support of bare copper piping shall be coated with copper colored
epoxy paint, B-Line series DURA-COPPER™. Additionally a plastic coating or a felt lining in
hanger can be used.
B. Hangers for other than bare copper pipe shall be zinc plated in accordance with ASTM
B633 - SC3 or shall have an electro-deposited green epoxy finish, B-Line series DURA GREEN™.
C. Strut channels shall be pre-galvanized in accordance with ASTM A653 G90 or have
an electro-deposited green epoxy finish, B-Line series DURA GREEN.
E. Hangers and strut located in corrosive areas shall be Type 304 (316) stainless steel
with stainless steel hardware.
B. Horizontal steel piping shall be supported in accordance with ANSI/MSS SP-69 & SP-58
Tables 3 and 4, excerpts of which follow below:
2” 3/8” 10’-0”
1
2 /2” 1/2” 11’-0”
3” 1/2” 12’-0”
1
3 /2” 1/2” 13’-0”
4” 5/8” 14’-0”
5” 5/8” 16’-0”
6” 3/4” 17’-0”
8” 3/4” 19’-0”
10” 7/8” 22’-0”
12” 7/8” 23’-0”
14” 1” 25’-0”
16” 1” 27’-0”
C. Horizontal copper tubing shall be supported in accordance with ANSI/MSS SP-69 & SP-58
Tables 3 and 4, excerpts of which follow below:
D. Provide means of preventing dissimilar metal contact such as plastic coated hangers,
copper colored B-Line series DURA-COPPER™ epoxy paint, or non-adhesive isolation tape
(B-Line series Iso-Pipe™). Galvanized felt isolators sized for copper tubing may also be used,
B-Line series B3195CT.
E. Support horizontal cast iron pipe adjacent to each hub, with 10 feet maximum spacing
between hangers.
F. Install hangers to provide a minimum of 1/2 inch space between finished covering and
adjacent work.
I. Where several pipes can be installed in parallel and at the same elevation, provide trapeze
hangers as specified in Section 2.02 C. Trapeze hangers shall be spaced according to the
Technical Data
smallest pipe size, or install intermediate supports according to schedule in Section 3.01 B.
J. Do not support piping from other pipes, ductwork or other equipment which is not
building structure.
B. Provide inserts for suspending hangers from reinforced concrete slabs and sides of
reinforced concrete beams.
C. Where concrete slabs form finished ceilings, provide inserts to be flush with slab surface.
D. For inserts carrying 5” nominal pipe and larger, provide hooked rod to concrete
reinforcement.
Beam clamps offered in this section are designed to provide attachment of hanger rods to structural members without drilling or
welding. A wide range of types and sizes are available for various applications.
Materials
Carbon Steel, Malleable Iron and Forged Steel are used in the manufacturing of beam clamps and accessories. Stainless steel and
other materials are available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-Galvanized
Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating and DURA GREEN™.
Other special coatings are available upon request.
Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may
or may not be uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may
be supplied Electro-Plated, copper plated, or in stainless steel.
Recommended Set screw Torque (unless otherwise specified)
1/4”-20 3/8”-16 1/2”-13 5/8”-11 3/4”-10
4 ft/lbs (5 Nm) 5 ft/lbs (7 Nm) 11 ft/lbs (15 Nm) 21 ft/lbs (28 Nm) 34 ft/lbs (46 Nm)
Over torqued set screws will damage beam clamps in this section.
We are aware that torque wrenches are not used or not available in many instances. In the absence of a torque wrench, the set
screw should be finger tightened to the I-beam and then an additional 1/4 to 1/2 turn applied to the set screw.
Approvals (as noted)
Items in this section are Underwriters Laboratories Listed, Factory Mutual Approved, and comply with Federal Specification
WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 27 B-Line series Pipe Hangers & Supports
Beam Clamps
B351L - Steel C-Clamp With Locknut
Size Range: 3/8"-16 thru 7/8"-9 rod
Set Screw and
Material: Steel
D Locknut Included
Function: For attachment to I-beams, channels, and wide flange beams
where the thickness does not exceed 3/4" (19.0mm). Hardened set screw B A
secures “C” Clamp to beam. (Rod Size)
Hanger Rod
Approvals: B351L (3/8”-16 thru 3/4”-10), is Underwriters Laboratories Listed Not Included
in the USA (UL) and Canada (cUL). Conforms to Federal Specification
WW-H-171E & A-A-1192A, Type 23 and Manufacturers Standardization
Society ANSI/MSS SP-69 & SP-58, Type 23. C
Finish: Plain. Contact customer service for alternative finishes and materials.
Note: When retaining strap is required, order B3362 thru B3365 separately.
See page 29.
Order By: Part number and finish
B351L-3/8 3/8"-16 23/8" (60.3) 23/8" (60.3) 3/4" (19.0) 300 (0.89) 4" (100) 41 (18.6)
B351L-1/2 1/2"-13 23/8" (60.3) 23/8" (60.3) 3/4" (19.0) 380 (1.69) 6" (150) 41 (18.6)
B351L-5/8 5/8"-11 23/8" (60.3) 21/4" (57.1) 3/4" (19.0) 550 (2.44) 6" (150) 60 (27.2)
Beam Clamps
B351L-3/4 3/4"-10 23/8" (60.3) 21/4" (57.1) 3/4" (19.0) 630 (2.80) 6" (150) 71 (32.2)
B351L-7/8 7/8"-9 3" (76.2) 31/4" (82.5) 1" (25.4) 1200 (5.34) -- -- 184 (83.4)
Function: Designed for attaching a hanger rod to the flange of a beam. Locknut Included (19.0)
B3036L-1/2 1/2"-13 13/4" (44.4) 13/4" (44.4) 380 (1.69) 5" (125) 41 (18.6)
B3036L-5/8 5/8"-11 2" (50.8) 17/8" (47.6) 530 (2.36) 6" (150) 60 (27.2)
B3036L-3/4 3/4"-10 2" (50.8) 2" (50.8) 530 (2.36) 6" (150) 71 (32.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 28 Eaton
Beam Clamps
B3362, B3363, B3364, B3365 - Retaining Strap
B 3/4"
Size Range: 6” (152.4mm) to 12” (304.8mm)
(19.0)
lengths
Material: Steel (Stainless Steel available) Flange Width Length L
Finish: Pre-Galvanized in. (mm) in. (mm)
Material Thickness
12 Gauge (2.7)
B3362-L B351L-3/8 & 1/2 11/4" (31.7) 7/16" (11.1) 27 (12.2) 35 (15.9) 44 (19.9) 52 (23.6)
B3363-L B351L-5/8 & 3/4, 11/4" (31.7) 5/8" (15.9) 26 (11.8) 35 (15.9) 43 (19.5) 52 (23.6)
Beam Clamps
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 29 B-Line series Pipe Hangers & Supports
Beam Clamps
3/4"
B3031-3/8 - Light Duty Malleable C-Clamp
(19.0)
Material: Malleable Iron
17/8"
Function: Designed for attaching a 3/8"-16 hanger rod to the top or 11/2" (47.6)
bottom flange of a beam or bar joist when setscrew is in the down position (38.1)
as shown.
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada Throat Opening
(cUL) for up to 4” pipe. Conforms to Federal Specification WW-H-171E & 11/16" (17.5)
A-A-1192A, Type 19 and Manufacturers Standardization Society ANSI/MSS
SP-69 & SP-58, Type 19.
Finish: Plain or Electro-Galvanized
Order By: Part number and finish. When retaining strap is required,
order Fig. 69 separately. See Page 37. Hanger Rod Set Screw and
Weight: Approx. Wt./100 25 Lbs. (11.3kg) Not Included Locknut Included
Design Load: 350 Lbs. (1.55kN)
Beam Clamps
Function: For attachment to structural shapes requiring wider throat Throat Opening B
especially under roof with bar joist construction. 11/4" (31.7) for B3033-3/4 & 1/2
5 5 3
This clamp may be used with the set screw in the up or down position. 1 /16" (33.3) for B3033- /8 & /4
A
Approvals: Underwriters Laboratories Listed in the USA (UL) and (Rod Size)
Canada (cUL), and Factory Mutual Engineering Approved (FM). Hanger Rod
Conforms to Federal Specification WW-H-171E Type 19 & A-A-1192A, Not Included
Type 19 & 23 and Manufacturers Standardization Society ANSI/MSS
SP-69 & SP-58, Type 19 & 23. Set Screw and
Locknut Included
Finish: Plain. Contact customer service for alternative finishes and
materials.
Order By: Part number, rod size and finish
Note: Do not over tighten set screw.
Bottom Flange
Attachment Applications
B3033-3/8 3/8"-16 21/4" (57.1) 2" (50.8) 11/8" (28.6) 500 (2.22) 4" (100) 54 (24.5)
B3033-1/2 1/2"-13 25/16" (58.7) 23/16" (55.6) 11/4" (31.7) 810 (3.60) 8" (200) 51 (23.1)
B3033-5/8 5/8"-11 25/8" (66.7) 21/2" (63.5) 13/8" (34.9) 1000 (4.45) 8" (200) 70 (31.7)
B3033-3/4 3/4"-10 211/16" (68.3) 21/2" (63.5) 17/16" (36.5) 1400 (6.23) 10" (250) 98 (44.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 30 Eaton
Beam Clamps
B3034 - C-Clamp
B3034-3/8" and B3034-1/2" sizes
Size Range: 3/8"-16 thru 3/4"-10 rod
Attach only as shown.
Material: Cast Malleable Steel with hardened cup point set
screw and jam nut
Function: Recommended for hanging from steel beam
where flange thickness does not exceed 3/4" (19.0mm). D
C
Features: May be used on top or bottom flange of the
beam. Beveled lip allows hanging from top flange where B
clearance is limited. may be installed with the set screw in Throat
the up or down position. Offset design permits unlimited rod Opening A
adjustment by allowing the rod to be threaded completely 3/4" (19.0) (Rod Size)
through the clamp. The rear window design permits
Hanger Rod
inspection of thread engagement. Not Included
Approvals: Underwriters Laboratories Listed in the USA
(UL) and Canada (cUL), and Factory Mutual Engineering Set Screw and
Locknut Included
Approved (FM) for 3/8”-16 and 1/2”-13 rod sizes.
Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 19 & 23 and Manufacturers Standardization
Society ANSI/MSS SP-69 & SP-58, Type 19 & 23. 3/8"-16 is B3034-3/8
(cULus) Listed to support up to 4" (100mm) pipe with the set Shown
screw in the down position, up to 3" (75mm) pipe with the
set screw in the up position. 1/2"-13 is (cULus) Listed to Top Flange
support up to 8" (200mm) pipe with the set screw in the Attachment
down position, up to 6" (150mm) pipe with the set screw Applications
Beam Clamps
in the up position.
Finish: Plain. Contact customer service for alternative finishes
and materials.
Order By: Part number and finish
C
D
Throat B
Opening
3/4" (19.0) Bottom Flange
A Attachment
(Rod Size) Applications
Hanger Rod
Not Included
Set Screw and
Locknut Included
B3034-3/8 3/8"-16 15/8" (41.3) 2" (50.8) 7/8" (19.0) 560 (2.49) 4" (100) 30 (13.6)
B3034-1/2 1/2"-13 113/16" (46.0) 23/16" (55.6) 13/16" (30.2) 810 (3.60) 8" (200) 47 (21.3)
B3034-5/8 5/8"-11 13/4" (44.5) 21/8" (54.0) 11/4" (31.7) 1000 (4.45) -- -- 58 (26.3)
B3034-3/4 3/4"-10 2" (50.8) 21/4" (57.2) 11/4" (31.7) 1500 (6.67) -- -- 77 (35.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 31 B-Line series Pipe Hangers & Supports
Beam Clamps
TOLCO™ Fig. 68S - Reversible Malleable Beam Clamp 3/4” (19.0mm) Throat Opening
TOLCO™ Fig. 68W - Reversible Malleable Beam Clamp 11/4” (31.7mm) Throat Opening (bottom of page)
Size Range:
5/8"-11 rod sizes thru 7/8"-9 rod sizes
Material: Cast Malleable Steel with hardened cup point set screw and jam nut
Function: Recommended for hanging from steel beam where flange thickness does
not exceed 3/4” (19.0mm) on Fig. 68S or 11/4” (31.7mm) on Fig.68W. B
Features: May be used on top or bottom flange of beam. Beveled lip allows hanging
from top flange where clearance is limited. May be installed with set screw in up or E
down position. Offset design permits unlimited rod adjustment by allowing the rod to
be threaded completely through the clamp. The rear window design permits inspection C
F D
of thread engagement.
Approvals: Factory Mutual Engineering Approved (FM). Underwriters Laboratories
Listed in the USA (UL) and Canada (cUL), Conforms to Federal Specification A
WW-H-171E, Type 23 and Manufacturers Standardization Society SP-58, Type 19. (Rod Size)
Hanger Rod
Factory Mutual Engineering Approved (FM) only with the set screw in the down
Not Included
position.
Fig. 68S Set Screw and
(OSHPD). For additional load spacing and placement information relating to OSHPD
projects, please refer to the Seismic Restraint System Guidelines. Locknut Included
D = Depth of Throat
Finish: Plain. Contact customer service
B
for Electro-Galvanized finish.
Order By: Part number and finish E
Beam Clamps
Fig. 68W
Fig. 68S F C
D
A
Note: (Rod Size)
For 3/8”-16 and 1/2”-13 Hanger Rod
Not Included
rod sizes use B3033 (page 30)
and B3034 (page 31) series Fig. 68W
beam clamps.
Set Screw and
Locknut Included
Fig. 68S
C Max Rec. Load Max Rec. Load Approx.
Part Rod Size B Min. D E F Set Screw Up Set Screw Down Wt./100
No. A in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kN) Lbs. (kg)
68S-5/8 5/8”-11 19/16” (39.7) 3/4” (19.0) 1” (25.4) 9/16” (14.3) 11/8” (28.6) 750 (3.33) 1130 (5.02) 50 (22.7)
68S-3/4 3/4”-10 13/4” (44.4) 3/4” (19.0) 11/8” (28.6) 9/16” (14.3) 11/4” (31.7) 750 (3.33) 1130 (5.02) 81 (36.7)
68S-7/8 7/8”-9 13/4” (44.4) 3/4” (19.0) 11/8” (28.6) 9/16” (14.3) 15/16” (33.3) 750 (3.33) 1130 (5.02) 75 (34.0)
Fig. 68W
C Max Rec. Load Max Rec. Load Approx.
Part Rod Size B Min. D E F Set Screw Up Set Screw Down Wt./100
No. A in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kN) Lbs. (kg)
68W-5/8 5/8”-11 11/2” (38.1) 11/4” (31.7) 1” (25.4) 9/16” (14.3) 11/8” (28.6) 750 (3.33) 1130 (5.02) 68 (30.8)
68W-3/4 3/4”-10 13/4” (44.4) 11/4” (31.7) 11/8” (28.6) 3/8” (19.5) 11/4” (31.7) 750 (3.33) 1130 (5.02) 110 (49.9)
68W-7/8 7/8”-9 13/4” (44.4) 11/4” (31.7) 11/8” (28.6) 9/16” (14.3) 15/16” (33.3) 750 (3.33) 1130 (5.02) 98 (44.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 32 Eaton
Beam Clamps
TOLCO™ Fig. 65 - Reversible Steel C-Type Beam Clamp 3/4” (19.0mm) Throat Opening
TOLCO™ Fig. 65XT - Reversible Steel C-Type Beam Clamp 3/4” (19.0mm) Throat Opening (bottom of page)
Size Range: Component of State of
Fig. 65 - 1/2"-13 rod sizes, and 5/8"-11 rod sizes California OSHPD Approved
Fig. 65XT - 3/8"-16 rod size (see below) Seismic Restraints System
Material: Steel with hardened cup point set screw and jam nut
Function: Recommended for hanging from steel beam where flange thickness does
not exceed 3/4” (19.0mm).
Features: All steel construction eliminates structural deficiencies associated with
casting type beam clamps. May be used on top or bottom flange of beam. (Beveled lip B
allows hanging from top flange where clearance is limited.) May be installed with set D
screw in up or down position. Offset design permits unlimited rod adjustment by
allowing the rod to be threaded completely through the clamp. Open design permits
E
inspection of thread engagement. C
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL).
Exceeds requirements of the National Fire Protection Association (NFPA), pamphlet 13,
3/8"-16 rod will support 1/2” (15mm) thru 4” (100mm) pipe F
1/2"-13 rod will support 1/2” (15mm) thru 8” (200mm) pipe A
Included in the Seismic Restraints Catalog approved by the State of California
Office of Statewide Health Planning and Development (OSHPD). For additional
load spacing and placement information relating OSHPD projects, please refer to
Set Screw and
the Seismic Restraint System Guidelines.
Locknut Included
Beam Clamps
Finish: Plain. Contact customer service for alternative finishes and materials.
Order By: Part number and finish
Fig. 65 Patent #4,570,885
11/8"
Fig. 65XT-3/8 - Beam Clamp (28.6)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 33 B-Line series Pipe Hangers & Supports
Beam Clamps
TOLCO™ Fig. 66 - Reversible Steel C-Type Beam Clamp 11/4” (31.7mm) Throat Opening
Component of State of
Size Range: 3/8"-16, 1/2"-13 rod sizes, and 5/8"-11 rod sizes California OSHPD Approved
Material: Steel with hardened cup point set screw and jam nut Seismic Restraints System
Function: Recommended for hanging from steel beam where flange
thickness does not exceed 11/4” (31.7mm).
Features: All steel construction eliminates structural deficiencies associated with
casting type beam clamps. May be used on top or bottom flange of beam. (Beveled lip B
allows hanging from top flange where clearance is limited.) May be installed with set D
screw in up or down position. Offset design permits unlimited rod adjustment by
allowing the rod to be threaded completely through the clamp. Open design permits
inspection of thread engagement.
E
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL).
Exceeds requirements of the National Fire Protection Association (NFPA), pamphlet 13, C
3/8"-16 rod will support 1/2” (15mm) thru 4” (100mm) pipe
1/2"-13 rod will support 1/2” (15mm) thru 8” (200mm) pipe F
Included in the Seismic Restraints Catalog approved by the State of California
Office of Statewide Health Planning and Development (OSHPD). For additional load
spacing and placement information relating OSHPD projects, please refer to the A
Seismic Restraint System Guidelines.
Finish: Plain. Contact customer service for alternative finishes and materials.
Set Screw and
Order By: Part number and finish Locknut Included
Beam Clamps
Part Rod Size B C D E
No. A in. (mm) in. (mm) in. (mm) in. (mm)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 34 Eaton
Beam Clamps
TOLCO™ Fig. 67SS - Stainless Steel Reversible C-Type Beam Clamp 3/4” (19.0mm) Throat Opening
TOLCO™ Fig. 68SS - Stainless Steel Reversible C-Type Beam Clamp Wide Mouth
Size Range: 3/8"-16 and 1/2"-13 rod sizes
Material: Stainless Steel (Type 316 or 304)
Function: Recommended for hanging from steel beams where flange thickness does B
not exceed 3/4” (19.0mm) for Fig. 67SS or 11/4” (31.7mm) for Fig. 68SS.
E
Features: All steel construction eliminates structural deficiencies associated with
casting type beam clamps. May be used on top or bottom flange of beam. May be G
installed with set screw in up or down position. Offset design permits unlimited rod
adjustment by allowing the rod to be threaded completely through the clamp.
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL).
Conforms to Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58,
Type 19. Meets or exceeds requirements of the National Fire Protection Association
(NFPA), pamphlet 13.
3/8"-16 rod will support 1/2” (15mm) thru 4” (100mm) pipe
1/2"-13 rod will support 1/2” (15mm) thru 8” (200mm) pipe
D
Order By: Part number and stainless steel type.
C F
Beam Clamps
Fig. 67SS A
67SS-3/8 3/8”-16 1/2" - 4” (15 - 100) 3” (76,2) 7/8” (22.2) 1” (25.4) 15/8” (41.3)
67SS-1/2 1/2”-13 5" - 8” (125 -200) 3” (76,2) 7/8” (22.2) 1” (25.4) 15/8” (41.3)
Fig. 68SS *
68SS-3/8 3/8”-16 1/2" - 4” (15 - 100) 21/16” (52.4) 11/8” (28.6) 3/4” (19.0) 11/4” (31.7)
68SS-1/2 1/2”-13 5" - 8” (125 -200) 21/4” (57.1) 11/4” (31.7) 13/16” (20.6) 11/4” (31.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 35 B-Line series Pipe Hangers & Supports
Beam Clamps
Set Screw
B303-B309 - Beam Clamps Included
Size Range: 1/4"-20 thru 5/8"-11 rod T
Material: Steel 7/8" (22.2) 11/8"
Maximum (28.6)
Function: Designed for attaching a hanger rod to the flange of a beam.
Flange
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Thickness
Type 19 and Manufacturers Standardization Society ANSI/MSS SP-69 & C
SP-58, Type 19.
Finish: Electro-Galvanized or Hot-Dip Galvanized
Order By: Part number and finish. When retaining strap is required, order A
B312 separately. See page 39. 21/2"
(63.5)
Recommended Set Screw Torque:
3/8”-16 = 150 in-lbs (16.9 N•m)
1/2”-13 = 350 in-lbs (39.5 N•m)
B303 1/4”-20 3/8”-16 25/16" (58.7) 11 Ga. (3.0) 400 (1.78) 72 (32.6)
B304 5/16”-18 3/8”-16 25/16" (58.7) 11 Ga. (3.0) 600 (2.67) 72 (32.6)
B305 3/8”-16 3/8”-16 25/16" (58.7) 11 Ga. (3.0) 600 (2.67) 72 (32.6)
B306 3/8”-16 1/2”-13 27/16" (61.9) 7 Ga. (4.5) 1100 (4.89) 97 (44.0)
B307 1/2”-13 1/2”-13 27/16" (61.9) 7 Ga. (4.5) 1100 (4.89) 97 (44.0)
Beam Clamps
B308 1/2”-13 1/2”-13 29/16" (65.1) 1/4" (6.3) 1500 (6.67) 133 (60.3)
B309 5/8”-11 1/2”-13 29/16" (65.1) 1/4" (6.3) 1500 (6.67) 133 (60.3)
B321-1 3/8”-16 1/2”-13 39/16" (92.1) 1/4" (6.3) 1300 (5.78) 187 (84.8)
B321-2 1/2”-13 1/2”-13 39/16" (92.1) 1/4" (6.3) 1400 (6.23) 186 (84.3)
B321-3 5/8”-11 1/2”-13 39/16" (92.1) 1/4" (6.3) 1600 (7.12) 185 (83.9)
B321-4 5/8”-11 5/8”-11 323/32" (94.4) 5/16" (7.9) 1800 (8.00) 239 (108.4)
B321-5 3/4”-10 5/8”-11 323/32" (94.4) 5/16" (7.9) 2000 (8.89) 238 (107.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 36 Eaton
Beam Clamps
TOLCO™ Fig. 69 - Beam Clamp Retaining Strap
Component of State of
Size Range: 3/8"-16 thru 3/4"-10 rod
California OSHPD Approved
4” (101,6mm) thru 16” (406.4mm) lengths Seismic Restraints System
Note: longer lengths are available consult factory
Material: Pre-Galvanized Steel
Function: To offer more secure fastening of various types of
beam clamps to beam where danger of movement might be 7/16"
expected. NFPA 13 requires the use of retaining straps with (11.1)
all beam clamps installed in earthquake areas. Satisfies 9/16"
Finish: Pre-Galvanized
Order By: Part number, length (L), and finish.
Notes: Minimum return on strap is 1” (25.4mm)
Lengths over 16” (406mm) are not UL Listed
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 37 B-Line series Pipe Hangers & Supports
Beam Clamps
TOLCO™ Fig. 69R - Retrofit Capable Beam Clamp Retaining Strap
Component of State of
Size Range: 3/8"-16 & 1/2"-13 rod California OSHPD Approved
4” (101,6mm) thru 16” (406.4mm) lengths Seismic Restraints System
Note: longer lengths are available consult factory
Material: Pre-Galvanized Steel
Function: To offer more secure fastening of various types of
beam clamps to beam where danger of movement might be
expected. NFPA 13 requires the use of retaining straps with
all beam clamps installed in earthquake areas. Satisfies
requirements of NFPA 13.
Features: Beveled locking slot* is precisely formed to align A
with the threaded section of a hanger rod or set screw and
engage the unit securely. May be used as shown in Section A
“A-A” or inverted. Allows easy installation for new construction
or retrofit applications.
Important Note: Good installation practice of a retaining
strap requires that the strap be held tightly and securely to all
component parts of the assembly. Therefore a locking
mechanism of some kind, such as a hex nut or the beveled
locking slot of the Fig. 69R will provide a more secure reliable
installation.
Approvals: Underwriters Laboratories Listed in the USA (UL)
and Canada (cUL). Approved for use with any listed beam
Beam Clamps
clamp. Included in the Seismic Restraints Catalog approved
by the State of California Office of Statewide Health Planning
and Development (OSHPD). For additional load spacing and
placement information relating OSHPD projects, please refer
to the Seismic Restraint System Guidelines.
Finish: Pre-Galvanized A-A
Order By: Part number, length, and finish.
Note: Minimum return on strap is 1” (25.4mm)
* Patent #5,947,424
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 38 Eaton
Beam Clamps
B312 - Retaining Strap Material Thickness
14 Gauge (1.9)
Size Range: 9” (228.6mm) to 18” (457.2mm) strap lengths 13/4"
(44.4)
Material: Steel L
Function: Designed for use with B303-B309 and B321 beam clamps.
Finish: Pre-Galvanized 1/2"
11/4"
(12.7)
Order By: Part number and finish. (31.7) 1/4"
(6.3)
Notes:
Maximum beam thickness 3/4” (19.0). For thicker beams step up one flange width size.
Requires field forming on beam.
B3040-3/8 3/8"-16 23/4" (69.8) 113/16" (46.0) 1/4" x 11/4" (6.3 x 31.7) 300 (1.33) 120 (54.4)
B3040-1/2 1/2"-13 23/4" (69.8) 13/4" (44.4) 1/4" x 11/2" (6.3 x 38.1) 700 (3.11) 160 (72.6)
B3040-5/8 5/8"-11 3" (76.2) 13/4" (44.4) 1/4" x 13/4" (6.3 x 44.4) 1000 (4.45) 216 (98.0)
B3040-3/4 3/4"-10 33/8" (85.7) 17/8" (47.6) 3/8" x 2" (9.5 x 50.8) 1800 (8.00) 442 (200.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 39 B-Line series Pipe Hangers & Supports
Beam Clamps
B3050 - Beam Clamp A
Steel Size
Center of bolt to bottom of
Material: Steel beam flange.
Function: Recommended for the suspending of hanger rod from
the center of an I-beam, equally distributing the load on both sides
of the beam. Use with B3210 eye rod, B3211 welded eye rod A
'W'
or B3200 weldless rye nut.
Bolt and Nut Included C
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A,
Type 21 and Manufacturers Standardization Society ANSI/MSS SP-69 &
Bolt Size
SP-58, Type 21.
Finish: Plain. Contact customer service for alternative finishes and
materials.
B
Order By: Part number, type, width of flange and finish.
B3050-2 X * 1/2"-13 3/16" (4.8) 1/2" (12.7) 13/8" (34.9) 5/8" (15.9) 21/8" (54.0) 1/4"x 11/4" (6.3 x 31.7) 1000 (3.11)
B3050-5 X * 3/4"-10 5/8" (25.9) 1" (25.4) 17/8" (47.6) 7/8" (22.2) 3" (76.2) 1/2"x 2" (12.7 x 50.8) 3000 (6.67)
Beam Clamps
Flange Width Approx. Wt./100 For Beam Clamp Size
* 'W' 2 5
in. (mm) lbs. (kg) lbs. (kg)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 40 Eaton
Beam Clamps
B3055 - Steel Beam Clamp
Size Range: 3/8"-16 thru 1"-8 rod
Material: Steel
Function: Designed for attaching a hanger rod to be centered under beam flanges.
2" (50.8mm) vertical adjustment is provided in the clamp.
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 21
and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 21.
Finish: Plain or Electro-Galvanized
Order By: Part number, flange width, and finish.
Steel Size
Note:
Box Style
Steel Size Furnished For
W B3055-3/8 x 4"
C
B3055-1/2 x 4"
Bolt and Nut B
B3055-5/8 x 4"
Included B3055-3/4 x 4"
W
B B3055-7/8 x 4"
C B3055-7/8 x 5"
Center of cross bolt to
bottom of side of B3055-1 x 4"
hanger rod nut. B3055-1 x 5"
B A
Beam Clamps
B3055-1 x 6"
(Rod Size)
Hanger Rod
NOTE: Not Included
Slots on bottom
portions of clamp halves
allow 1” (25.4) adjustment for
A variance in flange widths
(Rod Size)
Hanger Rod
Not Included
B3055-3/8 3/8"-16 3" (76.2) 4" (101.6) 1/4" x 11/4" (6.3 x 31.7) 550 (2.44)
B3055-1/2 1/2"-13 3" (76.2) 4" (101.6) 1/4" x 11/2" (6.3 x 38.1) 850 (3.78)
B3055-5/8 5/8"-11 31/4" (82.5) 41/2" (114.3) 3/8" x 11/2" (9.5 x 38.1) 1100 (4.89)
B3055-3/4 3/4"-10 31/4" (82.5) 41/2" (114.3) 3/8" x 2" (9.5 x 50.8) 1500 (6.67)
B3055-7/8 7/8"-9 31/2" (88.9) 5" (127.0) 1/2" x 2" (12.7 x 50.8) 2600 (11.56)
B3055-1 1"-8 31/2" (88.9) 51/2" (139.7) 1/2" x 2" (12.7 x 50.8) 4300 (19.12)
Flange Width W Approximate Wt./100 For Beam Clamp Size Lbs. (kg)
3
in. (mm) B3055- /8" B3055-1/2" B3055-5/8" B3055-3/4" B3055-7/8" B3055-1"
4" (101.6) 168 (76.2) 201 (91.2) 328 (148.8) 434 (196.8) 657 (298.0) 797 (361.5)
5" (127.0) 181 (82.1) 217 (98.4) 352 (159.6) 466 (211.4) 667 (302.5) 824 (373.7)
6" (152.4) 193 (87.5) 231 (104.8) 373 (169.2) 495 (224.5) 705 (319.8) 877 (397.8)
7" (177.8) 205 (93.0) 246 (111.6) 395 (179.2) 525 (238.1) 744 (337.5) 926 (420.0)
8" (203.2) 214 (97.1) 256 (116.1) 411 (186.4) 546 (247.6) 773 (350.6) 962 (436.3)
10" (254.0) 235 (106.6) 282 (127.9) 449 (203.6) 596 (270.3) 840 (381.0) 1046 (474.4)
12" (304.8) 259 (117.5) 311 (141.0) 493 (223.6) 655 (297.1) 918 (416.4) 1143 (518.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 41 B-Line series Pipe Hangers & Supports
Beam Clamps
B3054 - Malleable Iron Beam Clamp With Extension
B3054WO - Malleable Iron Beam Clamp Without Extension
Size Range: 3/8"-16 thru 7/8"-9 rod Clamping Rod and
Material: Malleable Iron Nuts Included
Beam Clamps
B3054WO
B3054-Rod Size
Rod
Size Rod Take Out 'E' For Beam Flange Width Of in. (mm)
Part No. A 3" (76.2) 4" (101.6) 5" (127.0) 6" (152.4) 7" (177.8)
B3054-3/8 3/8"-16 411/16" (119.1) 49/16" (115.9) 45/8" (117.5) 4" (101.6) 31/8" (79.4)
B3054-1/2 1/2"-13 413/16" (122.2) 41/2" (114.3) 45/16" (109.5) 315/16" (100.0) 31/4" (82.5)
B3054-5/8 5/8"-11 47/8" (123.8) 45/8" (117.5) 43/8" (111.1) 33/4" (95.2) 35/16" (84.1)
B3054-3/4 3/4"-10 51/8" (130.2) 5" (127.0) 45/8" (117.5) 41/4" (107.9) 33/4" (95.2)
B3054-7/8 7/8"-9 53/16" (131.8) 47/8" (123.8) 411/16" (119.1) 45/16" (109.5) 33/4" (95.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 42 Eaton
Beam Clamps
B3291, B3292, B3293, B3294, B3295, B3296, B3297, B3298
UFS Beam Clamp With Weldless Eye Nut
Available with left hand threads by adding an L to part number Example: B3291L-* C
Size Range: 3/8"-16 thru 2"-41/2 rod C
Material: Forged Steel
Function: Designed for attaching a hanger rod to the
bottom flange of a beam. Adjustable from flange widths
of 3" (76.2mm) to 15" (381.0mm). and flange thickness of E
no greater than 11/32" (26.2mm). E
Approvals: Complies with Federal Specification
WW-H-171E & A-A-1192A (Type 28 without links; B B
Type 29 with links,) and ANSI/MSS SP-58 (Type 28
With
without links; Type 29 with links).
Without Links
Finish: Plain or Electro-Galvanized A Links A
Order By: Part number, rod size and finish.
Note: Design load for B3291 thru B3295 based on
maximum rod size shown. Use the appropriate all
threaded rod design load shown on page 313 for sizes
less than maximum.
B3294 B3293
Beam Clamps
Maximum
Beam Flange Rod Size A
Part No. Thickness (Specify) B C Design Load Approx. Wt./100
*Rod Size In. (mm) * In. (mm) In. (mm) Lbs. (kN) Lbs. (kg)
3/8"-16, 1/2"-13,
B3291-* .60 (15.2) 5/8"-11, 3/4"-10 11/4" (31.7) 11/8" (28.6) 3230 (14.36) 390 (176.9)
B3292-* .60 (15.2) 7/8"-9, 1"-8 111/16" (42.9) 11/8" (28.6) 5900 (26.24) 915 (415.0)
B3293-*∆ .60 (15.2) 3/8"-16, 1/2"-13, 5/8"-11, 111/16" (42.9) 11/8" (28.6) 5900 (26.24) 1300 (589.6)
3/4"-10, 7/8"-9, 1"-8
B3294-* 1.031 (26.2) 7/8"-9, 1"-8 11/2" (38.1) 11/8" (28.6) 5900 (26.24) 2165 (982.0)
B3295-*∆ 1.031 (26.2) 7/8"-9, 1"-8 11/2" (38.1) 11/8" (28.6) 5900 (26.24) 3385 (1535.4)
B3296-* 1.031 (26.2) 1"-8, 11/8"-7, 21/8" (54.0) 11/8" (28.6) 11500 (51.15) 2390 (1084.1)
11/4"-7, 11/2"-6
B3297-*∆ 1.031 (26.2) 11/8"-7, 11/4"-7, 11/2"-6 21/8" (54.0) 11/8" (28.6) 11500 (51.15) 3575 (1621.6)
B3298-* 1.031 (26.2) 13/4"-5, 2"-41/2 49/16" (115.9) 11/8" (28.6) 11500 (51.15) 3675 (1666.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 43 B-Line series Pipe Hangers & Supports
Beam Clamps
B3042 - Top Beam Hook
Size Range: 3/8"-16 and 1/2"-13 rod Steel Size
A
Material: Steel (Rod Size)
Function: Designed for attaching hanger rod to the top flange Hanger Rod
of a beam or angle truss. The support rod completes assembly Not Included
W
and secures it to the flange.
Finish: Plain or Electro-Galvanized
Allows 1/8" (3.2) clearance between hanger
Order By: Part number flange width, flange thickness and
rod and flange of beam.
finish.
Beam Clamps
B3042-1/2 65 (29.5) 86 (39.0) 105 (47.6) 146 (66.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 44 Eaton
Beam Clamps
B3042T - Bar Joist Hanger
Size Range: 3/8"-16 and 1/2"-13 rod
Material: Steel
Function: Designed to hook on top chord of metal bar joist.
Hanger rod is threaded into product and secured with a washer
and nut.
Approvals: Underwriters Laboratories Listed in the USA (UL)
and Canada (cUL) for up to 4” (100mm) pipe with 3/8"-16 rod, up
to 6” (150mm) pipe with 1/2"-13 rod.
Finish: Plain. Contact customer service for alternative finishes
and materials.
Order By: Part number, width and thickness of bar joist, and
finish.
Beam Clamps
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 45 B-Line series Pipe Hangers & Supports
Beam Clamps
TOLCO™ Fig. 130 - Trus Joist Beam Clamp
Size Range: 130-1 = TJI 230 or equivalent
130-2 = TJI S31 or equivalent
130-3 = TJI 110 or equivalent W
130-4 = TJI 560 or equivalent
130-5 = TJI 560 or equivalent
130-6 = ––
A H
Material: Steel
Function: Designed for attachment to trus joist beams.
Use with B3210 Series eye rods. Hardware
1"
Approvals: Sizes 1 - 6 are Underwriters Laboratories Included (25.4)
Listed in the USA (UL) and Canada (cUL) list through
1/8"
4” (100mm) pipe. All Fig. 130 Beam Clamps meet
(3.2)
requirements of Factory Mutual Engineering and NFPA 13,
2"
through 4” (100mm) pipe. (50.8)
3/4"
Finish: Electro-Galvanized or Hot-Dip Galvanized 3/8"
Material Thickness (19.0)
(9.5)
Order By: Part number and finish. 11 Gauge (3.0)
Beam Clamps
Part Hardware A H W Approx. Wt./100
No. Size in. (mm) in. (mm) in. (mm) Lbs. (kg)
130-6† 1/2”-13 41/2" (114.3) 21/2" (63.5) 37/8" (98.4) 101 (45.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 46 Eaton
Pipe Hangers
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment
and limited movement in the piping system.
Pipe Hangers
Materials
Carbon Steel, Malleable Iron and AISI Type 304 & 316 Stainless Steel are used in the manufacturing of pipe hangers.
Other materials are available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black,
Electro-Galvanized Zinc (ASTM B633 SC3), Pre-Galvanized (ASTM A653 G90), Hot-Dip Galvanized After Fabrication
(ASTM A123), Red Primer, Plastic Coating, DURA GREEN™, DURA-COPPER™ and other special coatings are available
upon request.
Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not
be uniformly coated with special finishes i.e. Hot-Dip Galvanized, DURA GREEN, DURA-COPPER, PVC etc. In some cases,
the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, DURA-COPPER Painted or
Stainless Steel. Consult customer service for availability.
Approvals (as noted)
Items in this section are Underwriters Laboratories Listed, Factory Mutual Approved, and comply with Federal Specification
WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58.
Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 47 B-Line series Pipe Hangers & Supports
Pipe Hangers
TOLCO™ Fig. 1CBS - Clevis Pipe Spacer
Size Range: Size 1" (25mm) thru 20" (500mm) clevis hanger
Material: Steel
Component of State of
Function: Used as a spacer at a seismic brace location to
California OSHPD Approved
keep clevis hanger from collapsing during seismic event. Seismic Restraints System
Approvals: Included in our Seismic Restraints Catalog
approved by the State of California Office of Statewide
Health Planning and Development (OSHPD). For additional
load, spacing and placement information relating to OSHPD
projects, please refer to the Seismic Restraint Systems
Guidelines.
Installation Note: Fig. 1CBS fits easily over the cross bolt
and attaches by pinching tabs down.
Finish: Pre-Galvanized. Contact customer service for
alternative finishes and materials.
Order By: Part number and finish.
Pipe Hangers
(32) 4.1 (1.8)
1CBS-11/2 11/2” (40) 4.8 (2.2)
1CBS-2 2” (50) 9.4 (4.2)
1CBS-21/2 21/2” (65) 11.4 (5.2)
1CBS-3 3” (75) 13.9 (6.8)
1CBS-31/2 31/2” (90) 16.0 (7.2)
1CBS-4 4” (100) 18.0 (8.1)
1CBS-5 5” (125) 27.3 (12.4) Sizes 2” (50) thru 20” (500)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 48 Eaton
Pipe Hangers
B3100 - Standard Clevis Hanger Component of State of
California OSHPD Approved
Seismic Restraints System
SLIDE-RITE™ Clevis Hanger Features
Pipe will not ‘pinch’ when installing. B
Bottom of pipe to top of hanger.
15° swing in either direction allows pipe to easily A
feed thru. C
E (Rod Size)
Center of pipe to top of hanger.
Engineered design aligns bolt holes for quicker Hanger Rod
Not Included D
overhead installation. Rod Take-Out
Center of pipe to bottom of
hanger rod.
*SLIDE-RITE™ Clevis Hanger D E
design, as shown below, for Minimum thread length of hanger rod
sizes 2, 21/2, 3, 4, 5 & 6. F
Adjustment
Pat. No. 5,848,770 Top of cross bolt to bottom of hanger
C
5,924,655 rod nut inside the hanger.
B3100-1/2 1/2" (15) 3/8"-16 3/8"-16 21/8" (54.0) 13/4" (44.4) 15/16" (23.8)
B3100-3/4 3/4" (20) 3/8"-16 3/8"-16 21/2" (63.5) 2" (50.8) 11/8" (28.6)
Pipe Hangers
B3100-1 1" (25) 3/8"-16 3/8"-16 27/8" (73.0) 21/4" (57.1) 13/8" (34.9)
B3100-11/4 11/4" (32) 3/8"-16 3/8"-16 31/2" (88.9) 211/16" (68.2) 113/16" (46.0)
B3100-11/2 11/2" (40) 3/8"-16 3/8"-16 4" (101.6)` 31/16" (77.8) 21/4" (57.1)
B3100-2 * 2" (50) 3/8"-16 3/8"-16 41/2" (114.3) 35/16" (84.1) 21/2" (63.5)
B3100-21/2 * 21/2" (65) 1/2"-13 3/8"-16 53/8" (136.5) 315/16" (100.0) 31/16" (77.8)
B3100-3 * 3" (80) 1/2"-13 3/8"-16 61/2" (165.1) 43/4" (120.6) 315/16" (100.0)
B3100-31/2 31/2" (90) 1/2"-13 3/8"-16 71/4" (184.1) 51/4" (133.3) 41/16" (103.2)
B3100-4 * 4" (100) 5/8"-11 3/8"-16 73/4" (196.8) 51/2" (139.7) 51/2" (139.7)
B3100-5 * 5" (125) 5/8"-11 1/2"-13 83/4" (222.2) 61/8" (155.6) 6" (152.4)
B3100-6 * 6" (150) 3/4"-10 1/2"-13 105/16" (261.9) 615/16" (176.2) 7" (177.8)
B3100-8 8" (200) 3/4"-10 1/2"-13 123/4" (323.8) 87/16" (214.3) 71/8" (181.0)
B3100-10 10" (250) 7/8"-9 5/8"-11 151/8" (384.2) 93/4" (247.6) 83/8" (212.7)
B3100-12 12" (300) 7/8"-9 5/8"-11 171/2" (444.5) 111/8" (282.6) 911/16" (246.1)
B3100-14 14" (350) 1"-8 -- 193/8" (492.1) 123/8" (314.3) 105/8" (269.9)
B3100-16 16" (400) 1"-8 -- 213/8" (542.9) 133/8" (339.7) 119/16" (293.7)
B3100-18 18" (450) 1"-8 -- 25" (635.0) 16" (406.4) 143/16" (360.3)
B3100-20 20" (500) 11/4"-7 -- 283/4" (730.2) 173/4" (450.8) 165/8" (422.3)
B3100-24 24" (600) 11/4"-7 -- 323/4" (831.8) 193/4" (501.6) 185/8" (473.1)
B3100-30 30" (750) 11/4"-7 -- 3915/16" (1014.4) 2415/16" (633.4) 223/4" (577.8)
B3100-36 36" (900) 11/4"-7 -- 46" (1168.4) 28" (711.2) 25" (635.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 49 B-Line series Pipe Hangers & Supports
Pipe Hangers
Component of State of
B3100 - Standard Clevis Hanger California OSHPD Approved
1 Seismic Restraints System
Size Range: /2” (15mm) to 36” (900mm)
Material: Steel
Function: Recommended for the suspension of non-insulated pipe or insulated pipe with a B3151 shield.
Note: When an oversized clevis is used, a pipe spacer should be placed over the cross bolt to assure that the
lower U-strap will not move in on the bolt. When attaching seismic bracing to the clevis hangers, a Fig. 1CBS
(cross bolt spacer) must be installed. See Seismic Restraints Approval Guidelines.
Order pipe sleeves Fig. 1CBS-(pipe size) separately.
Approvals: Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide
Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD
projects, please refer to the B-Line/TOLCO Seismic Restraint Systems Guidelines. Underwriter's Laboratories Listed
in the USA (UL) and Canada (cUL) for sizes 3/4” (20mm) thru 12" (300mm). Factory Mutual Engineering Approved
(FM) for 3/4” (20mm) thru 12” (300mm) pipe. Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 1
and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 1. Also available to accommodate rod
schedule per National Fire Protection Association (NFPA) Pamphlet 13.
Maximum Temperature: 650°F (343°C).
Standard Finish: Plain, Electro-Galvanized, DURA GREEN™, or Hot-Dip Galvanized
also available in Stainless Steel
Order By: Part number and finish.
For AWWA - Ductile Iron Clevis Hangers, see B3102, page 52.
Special Note: Do not use the dimensions shown in the B3100 chart for NFPA hanger sizes.
Contact customer service for NFPA rod sizing on 1/2” (15mm) thru 12” (300mm) pipe.
Part numbers will be 1NFPA-pipe size.
Pipe Hangers
(63.5) (15.9) (3.25) (15.9)
B3100-11/4 21/2" (63.5) 7/8" (22.2) 730 (3.25) 40 (18.1)
B3100-11/2 21/2" (63.5) 13/16" (30.2) 730 (3.25) 42 (19.0)
B3100-2 * 21/2" (63.5) 15/8" (41.3) 730 (3.25) 52 (23.6)
B3100-21/2 * 21/2" (63.5) 2" (50.8) 1350 (6.00) 90 (40.8)
B3100-3 * 21/2" (63.5) 2" (50.8) 1350 (6.00) 110 (49.9)
B3100-31/2 21/2" (63.5) 2" (50.8) 1350 (6.00) 142 (64.4)
B3100-4 * 21/2" (63.5) 2" (50.8) 1430 (6.36) 132 (59.9)
B3100-5 * 21/2" (63.5) 2" (50.8) 1430 (6.36) 215 (97.5)
B3100-6 * 3" (76.2) 2" (50.8) 1940 (8.63) 320 (145.1)
B3100-8 31/2" (88.9) 25/16" (58.7) 2000 (8.89) 485 (220.0)
B3100-10 31/2" (88.9) 25/16" (58.7) 3600 (16.01) 846 (383.7)
B3100-12 31/2" (88.9) 25/8" (66.7) 3800 (16.90) 1083 (491.2)
B3100-14 4" (101.6) 27/8" (73.0) 4200 (18.68) 1432 (649.5)
B3100-16 4" (101.6) 211/16" (68.3) 4600 (20.46) 2200 (997.9)
B3100-18 41/2" (114.3) 315/16" (100.0) 4800 (21.35) 2500 (1134.0)
B3100-20 5" (127.0) 53/8" (136.5) 4800 (21.35) 4400 (1995.8)
B3100-24 5" (127.0) 53/8" (136.5) 4800 (21.35) 5000 (2268.0)
B3100-30 5" (127.0) 61/4" (158.7) 6000 (26.69) 6600 (2993.7)
B3100-36 5" (127.0 57/16" (138.1) 6000 (26.69) 8474 (3843.8)
*SLIDE-RITE™ Clevis Hanger design, as shown above, for sizes 2, 21/2, 3, 4, 5 & 6.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 50 Eaton
Pipe Hangers
B3100C - Standard Clevis Hanger - Plastic Coated
B3100F - Standard Clevis Hanger - Felt Lined for Copper Tubing
Size Range: 1/2” (15mm) to 8” (200mm) pipe B
Material: Steel A Bottom of pipe to top of hanger.
E (Rod Size) C
Insulation Material: 3/16” (4.8mm) Felt Hanger Rod Center of pipe to top of hanger.
Service: The B3100F is designed for the suspension of Not Included
D
copper tube so as to prevent electrolysis between tubing
Rod Take-Out
and hanger. The B3100C is designed for steel or other
Center of pipe to bottom of
pipe types of the same O.D. Both B3100F and B3100C D hanger rod.
act to reduce noise and vibration in pipe or tubing
systems. E
Minimum thread length of
Approvals: Underwriter's Laboratories Listed in the USA hanger rod
(UL) and Canada (cUL). C F
Maximum Temperature: 650°F (343°C). Adjustment
Standard Finish: Plain, Electro-Galvanized, or Hot-Dip Top of cross bolt to bottom of hanger
B rod nut inside the hanger.
Galvanized. Contact customer service for alternative
finishes and materials.
Order By: Part number and finish.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 51 B-Line series Pipe Hangers & Supports
Pipe Hangers
B3102 - A.W.W.A. Clevis Hanger
Size Range: 4” (100mm) to 24” (600mm) B
A
Material: Steel Bottom of pipe to top of hanger.
(Rod Size)
Function: Recommended for the suspension of Hanger Rod C
E Center of pipe to top of hanger.
flanged or bell and spigot A.W.W.A. cast iron or Not Included
ductile iron pipe. The O.D. of the A.W.W.A. iron D
pipe is shown in the data table. Rod Take-Out
Center of pipe to bottom of
Approvals: Conforms to Federal Specification hanger rod.
D
WW-H-171E & A-A-1192A, Type 1 and E
Manufacturers Standardization Society ANSI/MSS Minimum thread length of
SP-69 & SP-58, Type 1. hanger rod
Standard Finish: Plain & Electro-Galvanized. C F
Contact customer service for alternative finishes Adjustment
and materials. Top of cross bolt to bottom of hanger
B rod nut inside the hanger.
Order By: Part number and finish.
Pipe Hangers
Part No. in. (mm) A in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3102-4 4.80 (121.9) 5/8"-11 85/16" (211.1) 513/16" (147.6) 45/8" (117.5) 21/2" (63.5) 2" (50.8) 1430 (6.36) 203 (92.1)
B3102-6 6.90 (175.2) 3/4"-10 105/8" (269.9) 71/16" (179.4) 513/16" (147.6) 3" (76.2) 2" (50.8) 1940 (8.63) 352 (159.6)
B3102-8 9.05 (229.9) 3/4"-10 131/4" (336.5) 85/8" (219.1) 73/16" (182.5) 31/2" (88.9) 21/8" (54.0) 2000 (8.89) 532 (241.3)
B3102-10 11.10 (281.9) 7/8"-9 157/8" (403.2) 101/4" (260.3) 811/16" (220.6) 31/2" (88.9) 21/4" (57.1) 3600 (16.01) 800 (362.9)
B3102-12 13.20 (335.3) 7/8"-9 18" (457.2) 115/16" (287.3) 93/4" (247.6) 31/2" (88.9) 21/4" (57.1) 3800 (16.90) 1152 (522.5)
B3102-14 15.30 (388.6) 1"-8 203/8" (517.5) 125/8" (320.7) 113/16" (281.6) 4" (101.6) 27/8" (73.0) 4200 (18.68) 1449 (657.2)
B3102-16 17.40 (441.9) 1"-8 231/2" (569.9) 1411/16" (373.1) 127/8" (327.0) 4" (101.6) 33/8" (85.7) 4600 (20.46) 2100 (952.6)
B3102-18 19.50 (495.3) 1"-8 255/8" (650.9) 153/4" (400.0) 1315/16" (354.0) 41/2" (114.3) 33/8" (85.7) 4800 (21.35) 2294 (1040.5)
B3102-20 21.60 (548.6) 11/4"-7 291/2" (749.3) 189/16" (471.5) 177/16" (442.9) 5" (127.0) 413/16" (122.2) 4800 (21.35) 3887 (1763.1)
B3102-24 25.80 (655.3) 11/4"-7 33" (838.2) 191/8" (508.0) 20" (485.8) 5" (127.0) 51/4" (133.3) 4800 (21.35) 4844 (2197.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 52 Eaton
Pipe Hangers
B3108 - Extended Clevis Hanger A
(Rod Size)
Size Range: 3/4” (20mm) thru 12” (300mm) pipe Hanger Rod B
Not Included Bottom of pipe to top of hanger.
Material: Steel
C
Function: Recommended for the suspension of insulated Center of pipe to top of hanger.
pipe where the temperature does not require the use of
D
slides, guides, or rollers for movement.
Rod Take-Out
Approvals: Conforms to Federal Specification WW-H-171E C Center of pipe to bottom of
& A-A-1192A, Type 1 and Manufacturers Standardization E
hanger rod.
Society ANSI/MSS SP-69 & SP-58, Type 1. B E
Maximum Temperature: 650°F (343°C). Minimum thread length of
hanger rod.
Order By: Part number and finish.
D F
Standard Finish: Plain, Electro-Galvanized or Hot Dip Adjustment
Galvanized Top of cross bolt to bottom of
For service temperatures of 750°F (399°C) thru hanger rod nut inside the hanger.
1050°F (565°C) specify Type 304 Stainless Steel H
Maximum insulation thickness.
B3108-5 5" (125) 5/8"-11 131/8" (333.4) 105/16" (261.9) 91/8" (231.8)
B3108-6 6" (150) 3/4"-10 143/8" (365.1) 11" (279.5) 911/16" (246.0)
B3108-8 8" (200) 3/4"-10 163/4" (425.4) 123/8" (314.3) 111/8" (282.6)
B3108-10 10" (250) 7/8"-9 191/4" (488.9) 1313/16" (350.8) 125/16" (312.7)
B3108-12 12" (300) 7/8"-9 215/8" (549.3) 153/16" (385.8) 135/8" (346.1)
B3108-3/4 21/2" (63.5) 1/2" (12.7) 2" (50.8) 730 (3.25) 45 (20.4)
B3108-1 21/2" (63.5) 5/8" (15.9) 2" (50.8) 730 (3.25) 49 (22.2)
B3108-11/4 21/2" (63.5) 7/8" (22.2) 2" (50.8) 730 (3.25) 55 (24.9)
B3108-11/2 21/2" (63.5) 13/16" (30.2) 2" (50.8) 730 (3.25) 67 (30.4)
B3108-2 21/2" (63.5) 15/8" (41.3) 4" (101.6) 730 (3.25) 83 (37.6)
B3108-21/2 21/2" (63.5) 2" (50.8) 4" (101.6) 1350 (6.00) 177 (80.3)
B3108-3 21/2" (63.5) 2" (50.8) 4" (101.6) 1350 (6.00) 191 (86.6)
B3108-4 21/2" (63.5) 2" (50.8) 4" (101.6) 1430 (6.36) 237 (107.5)
B3108-5 21/2" (63.5) 2" (50.8) 4" (101.6) 1430 (6.36) 302 (137.0)
B3108-6 3" (76.2) 2" (50.8) 4" (101.6) 1940 (8.63) 397 (180.1)
B3108-8 31/2" (88.9) 25/16" (58.7) 4" (101.6) 2000 (8.89) 582 (264.0)
B3108-10 31/2" (88.9) 25/16" (58.7) 4" (101.6) 3600 (16.01) 968 (439.1)
B3108-12 31/2" (88.9) 25/8" (66.7) 4" (101.6) 3800 (16.90) 1221 (553.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 53 B-Line series Pipe Hangers & Supports
Pipe Hangers
B3690 - J-Hanger for Pipe or Conduit
B3690F - Felt Lined J-Hanger for Copper Tubing
B3690C - PVC Coated J-Hanger for Pipe or Conduit
Size Range: 1/2” (15mm) to 10” (250mm) pipe size
Material: Steel
Function: Recommended for the suspension of
non-insulated pipe, or insulated pipe with B3151 shield. A B
Side hole allows for wall mounting. (Rod Size) Center of pipe to top of hanger.
B3690F and B3690C are designed to reduce noise and Hanger Rod
vibration and/or prevent electrolysis between pipe and Not Included F
hanger. Rod Take-Out
Center of pipe to bottom of
Approvals: Conforms Manufacturers Standardization hanger rod.
Society ANSI/MSS SP-69 & SP-58, Type 5. C
Standard Finish: Electro-Plated. Contact customer D
service for alternative finishes and materials. Dia.
F
B
Pipe Hangers
B3690F B3690C
B3690-1/2 1/2" (15) 3/8"-16 25/8" (66.7) 13/4" (44.4) 7/16" (11.1) 11/2" (38.1) 115/16" (49.2) 400 (1.78) 18 (8.1)
B3690-3/4 3/4" (20) 3/8"-16 27/8" (73.0) 17/8" (47.6) 7/16" (11.1) 111/16" (42.9) 21/8" (54.0) 400 (1.78) 21 (9.5)
B3690-1 1" (25) 3/8"-16 215/16" (74.6) 115/16" (49.2) 7/16" (11.1) 113/16" (46.0) 25/16" (58.7) 400 (1.78) 22 (10.0)
B3690-11/4 11/4" (32) 3/8"-16 31/4" (82.5) 2" (50.8) 7/16" (11.1) 21/16" (52.4) 25/8" (66.7) 400 (1.78) 25 (11.3)
B3690-11/2 11/2" (40) 3/8"-16 39/16" (90.5) 23/16" (55.6) 7/16" (11.1) 27/16" (61.9) 27/8" (73.0) 400 (1.78) 27 (12.2)
B3690-2 2" (50) 3/8"-16 311/16" (93.7) 21/8" (54.0) 7/16" (11.1) 29/16" (65.1) 31/16" (77.8) 400 (1.78) 29 (13.1)
B3690-21/2 21/2" (65) 1/2"-13 47/16" (112.7) 27/16" (61.9) 9/16" (14.3) 33/16" (81.0) 35/8" (92.1) 500 (2.22) 64 (29.0)
B3690-3 3" (80) 1/2"-13 413/16" (122.2) 29/16" (65.1) 9/16" (14.3) 31/2" (88.9) 41/16" (103.2) 500 (2.22) 72 (32.6)
B3690-31/2 31/2" (90) 1/2"-13 51/8" (130.2) 25/8" (66.7) 9/16" (14.3) 33/4" (95.2) 43/8" (111.1) 500 (2.22) 84 (38.1)
B3690-4 4" (100) 5/8"-11 61/8" (155.6) 33/16" (81.0) 9/16" (14.3) 45/8" (117.5) 53/16" (131.8) 550 (2.44) 138 (62.6)
B3690-5 5" (125) 5/8"-11 63/4" (171.4) 31/4" (82.5) 9/16" (14.3) 51/16" (128.6) 53/4" (146.0) 550 (2.44) 162 (73.5)
B3690-6 6" (150) 3/4"-10 73/4" (196.8) 39/16" (90.5) 9/16" (14.3) 513/16" (147.6) 65/8" (168.3) 600 (2.67) 249 (112.9)
B3690-8 8" (200) 7/8"-9 93/16" (233.4) 315/16" (100.0) 9/16" (14.3) 615/16" (176.2) 8" (203.3) 760 (3.38) 291 (132.0)
B3690-10 10" (250) 7/8"-9 103/4" (273.0) 37/8" (98.4) 9/16" (14.3) 75/8" (193.7) 91/8" (231.8) 760 (3.38) 315 (142.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 54 Eaton
Pipe Hangers
B3109 - Flat Top Clevis Hanger
Size Range: 2” (50mm) to 8” (200mm) pipe size A
(Rod Size)
Material: Steel
Hanger Rod
Function: Recommended for suspending non- Not Included B
insulated, stationary pipe where space is limited. Bottom of pipe
Approvals: Complies with Manufacturers to top of hanger.
Standardization Society ANSI/MSS SP-69 & SP-58 C
Type 1. C Center of pipe
B to top of hanger.
Standard Finish: Plain or Electro-Galvanized D
D Rod Take-Out
Order By: Part number and finish.
Center of pipe to
bottom of hanger rod.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 55 B-Line series Pipe Hangers & Supports
Pipe Hangers
B3106 - Vee Bottom Clevis Hanger
Size Range: 1/2” (15mm) to 4” (100mm) pipe A B
(Rod Size) Overall Height
Material: Steel
Hanger Rod
C
Function: Recommended for the suspension of Not Included
Center of pipe to top of hanger.
flexible plastic pipe. Use with B3106V support
D
trough for plastic pipe. Rod Take-Out
Approvals: Complies with Manufacturers Center of pipe to bottom of hanger rod.
Standardization Society ANSI/MSS SP-69 & SP-58 B E
Type 1. Minimum thread length of hanger rod.
B3106-2 1/2" to 2" (15 to 50) 3/8"-16 515/16" (150.8) 41/16" (103.2)
B3106-4 21/2" to 4" (65 to 100) 1/2"-13 93/8" (238.1) 6" (152.4)
Pipe Hangers
B3106V - Plastic Pipe Support Channel
Size Range: 1/2” (15mm) to 4” (100mm) pipe
Material: Steel
Function: Designed for use with B3106 as a TxL
Steel Size
support for plastic or other flexible pipe systems.
Standard Finish: Pre-Galvanized. Contact
customer service for alternative finishes and
materials. B
Order By: Part number and finish.
Maximum
For Nominal Steel Size Hanger Design Approx.
Pipe Sizes T x L B Spacing Load Wt./100
Part No. in. (mm) in. (mm) in. (mm) Ft. (M) Lbs. (kN) Lbs. (kg)
B3106V-2 1/2" to 2" (15 to 50) 18 Ga. x 96" (1.2 x 2438.4) 19/16" (39.7) 8 (2.44) 150 (.67) 449 (203.6)
B3106V-4 21/2" to 4" (65 to 100) 18 Ga. x 120" (1.2 x 3048.0) 31/8" (79.4) 10 (3.05) 150 (.67) 1123 (509.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 56 Eaton
Pipe Hangers
B3104 - Light-Duty Clevis Hanger
B3104F - Light-Duty Clevis Hanger - Felt Lined
B3104C - Light-Duty Clevis Hanger - PVC Coated A
(Rod Size)
Size Range: 1/2” (15mm) to 4” (100mm) pipe Hanger Rod B
Material: Steel Not Included Bottom of pipe to top of hanger.
E
Function: Recommended for the suspension of light C
stationary pipe allowing for vertical adjustment. Center of pipe to top of hanger.
Approvals: Underwriter's Laboratories Listed in the USA (UL) D
and Canada (cUL) for sizes 3/4” (20mm) thru 4” (100mm). Rod Take-Out
D Center of pipe to bottom of
Conforms to Federal Specification WW-H-171E & A-A-1192A, hanger rod.
Type 12 and Manufacturers Standardization Society ANSI/MSS
SP-69 & SP-58, Type 1. E
C Minimum thread length of
Standard Finish: Plain, Electro- hanger rod.
B
Galvanized, or DURA-GREEN™ F
Order By: Part number and finish. Adjustment
Top of cross bolt to bottom of
hanger rod nut inside the hanger.
*Slide-Rite™ Clevis Hanger
design for sizes 2, 3 & 4.
Pat. No. 5,848,770
5,924,655
B3104-1/2 13/16" (20.6) 21/2" (63.5) 7/16" (11.1) 150 (.67) 13 (5.9)
B3104-3/4 1" (25.4) 21/2" (63.5) 7/16" (11.1) 250 (1.11) 22 (10.0)
B3104-1 13/8" (34.9) 21/2" (63.5) 9/16" (14.3) 250 (1.11) 24 (10.9)
B3104-11/4 13/4" (44.4) 21/2" (63.5) 13/16" (20.6) 250 (1.11) 29 (13.1)
B3104-11/2 2" (50.8) 21/2" (63.5) 1" (25.4) 250 (1.11) 30 (13.6)
B3104-2 * 215/16" (74.6) 21/2" (63.5) 13/4" (44.4) 250 (1.11) 35 (15.9)
B3104-21/2 37/16" (87.3) 21/2" (63.5) 2" (50.8) 350 (1.55) 82 (37.2)
B3104-3 * 33/4" (95.2) 21/2" (63.5) 2" (50.8) 350 (1.55) 91 (41.3)
B3104-31/2 4" (101.6) 21/2" (63.5) 2" (50.8) 350 (1.55) 98 (44.4)
B3104-4 * 49/16" (115.9) 21/2" (63.5) 23/16" (55.6) 400 (1.78) 132 (59.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 57 B-Line series Pipe Hangers & Supports
Pipe Hangers
B3104CT - Clevis Hanger B
Bottom of pipe to top of hanger.
B3104CTC - Clevis Hanger - PVC Coated C
A Center of pipe to top of hanger.
Size Range: 1/2” (15mm) to 6” (150mm) copper tubing (Rod Size)
D
Hanger Rod
Material: Steel Rod Take-Out
Not Included Center of pipe to bottom
Function: Recommended for the suspension of E of hanger rod.
non- insulated stationary copper tubing lines. E
Available with plastic coating to provide additional Minimum thread length
separation between tubing and hanger. of hanger rod.
Approvals: Conforms to Federal Specification F
D C Adjustment
WW-H-171E & A-A-1192A, Type 12 and Top of cross bolt to bottom of
Manufacturers Standardization Society hanger rod nut inside the hanger.
ANSI/MSS SP-69 & SP-58, Type 1.
B
Standard Finish: DURA-COPPER™
Order By: Part number and finish.
B3104CTC B3104CT
Pipe Hangers
B3104CT-21/2 21/2" (65) 1/2"-13 511/16" (144.5) 41/2" (114.3) 315/16" (100.0)
B3104CT-3 3" (80) 1/2"-13 53/16" (131.8) 35/8" (92.1) 4" (101.6)
B3104CT-31/2 31/2" (90) 1/2"-13 61/2" (165.1) 49/16" (115.9) 41/8" (104.8)
B3104CT-4 4" (100) 1/2"-13 73/8" (187.3) 35/16" (134.9) 43/8" (111.1)
B3104CT-5 5" (125) 1/2"-13 9" (228.6) 67/16" (163.5) 53/4" (146.0)
B3104CT-6 6" (150) 5/8"-11 105/16" (261.9) 71/4" (184.1) 61/2" (165.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 58 Eaton
Pipe Hangers
B3170CT - Adjustable Swivel Hanger for Copper Tubing
B3170CTC - Adjustable Swivel Hanger for Copper Tubing - Plastic Coated
Size Range: 1/2” (15mm) thru 6” (150mm) copper tubing
A
Material: Steel (Rod Size)
Hanger Rod
Function: Recommended for the suspension of B Not Included
copper tubing, allowing for vertical adjustment. Center of pipe to top of
(Available with plastic coating to provide additional knurled hanger rod nut.
separation between tubing and hanger.) C C
Approvals: Conforms to Federal Specification Rod Take-Out
WW-H-171E & A-A-1192A, Type 10 and Manufacturers Center of pipe to bottom
of hanger rod. D
Standardization Society ANSI/MSS SP-69 & SP-58,
D B
Type 10.
Top of pipe to bottom of
Standard Finish: DURA-COPPER™ hanger rod nut.
Order By: Part number and finish.
B3170CT-1/2 1/2" (15) 3/8"-16 21/16" (52.4) 11/8" (28.6) 31/32" (24.6)
B3170CT-3/4 3/4" (20) 3/8"-16 25/16" (58.7) 15/16" (33.3) 11/32" (26.2)
B3170CT-1 1" (25) 3/8"-16 21/2" (63.5) 19/16" (39.7) 15/32" (29.3)
B3170CT-11/4 11/4" (32) 3/8"-16 21/2" (63.5) 19/16" (39.7) 1" (25.4)
B3170CT-11/2 11/2" (40) 3/8"-16 215/16" (74.6) 2" (50.8) 15/16" (33.3)
B3170CT-2 2" (50) 3/8"-16 31/8" (79.4) 21/8" (54.0) 13/16" (30.2)
B3170CT-21/2 21/2" (65) 1/2"-13 41/16" (103.2) 29/16" (65.1) 13/8" (34.9)
B3170CT-3 3" (75) 1/2"-13 315/16" (100.0) 33/4" (95.2) 11/4" (31.7)
Pipe Hangers
B3170CT-31/2 31/2" (90) 1/2"-13 47/16" (112.7) 31/4" (82.5) 11/2" (38.1)
B3170CT-4 4" (100) 1/2"-13 411/16" (119.1) 39/16" (89.6) 19/16" (39.7)
B3170CT-5 5" (125) 1/2"-13 515/16" (150.8) 45/16" (109.5) 125/32" (45.2)
B3170CT-6 6" (150) 1/2"-13 611/16" (169.9) 53/16" (131.8) 21/8" (54.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 59 B-Line series Pipe Hangers & Supports
Pipe Hangers
TOLCO™ Fig. 200 - “Trimline” Adjustable Band Hanger
TOLCO™ Fig. 200F - “Trimline” Adjustable Band Hanger with Felt Lining for Copper Tubing
TOLCO™ Fig. 200C - “Trimline” Adjustable Band Hanger with Plastic Coated
TOLCO™ Fig. 200S - “Trimline” Adjustable Band Hanger with Removable Nut (For sizes 1” thru 2”)
Size Range: A
Fig. 200 - 1/2” (15mm) thru 8” (200mm) pipe Overall Height
Material: Steel, Pre-Galvanized to G90 specifications B
Center of pipe to top of knurled hanger rod nut.
Function: For fire sprinkler and other general piping purposes. Knurled
swivel nut design permits hanger adjustment after installation. D
Top of pipe to bottom of hanger rod nut.
Features:
• 1/2” (15mm) thru 2” (50mm) sizes have flared edges for ease of Fig.
200-1/2 &
installation on all pipe types and protects CPVC plastic pipe from 200-3/4
abrasion. Captured knurled nut design (flared top) on 1” thru 2” sizes D
keep nut from separating with hanger. Hanger is easily installed
around pipe.
• 1/2” (15mm), 3/4” (20mm), and 21/2” (65mm) thru 8” (200mm)) Spring B
tension on nut holds it securely in hanger before installation.
Knurled nut is easily removed. A
• For 1/2” (15mm) and 3/4” (20mm) sizes with non-captured knurl nuts
order Fig. 200S
Fig.
Approvals: Underwriters Laboratories listed (1/2” (15mm) thru 8” (200mm))
200-21/2 to 200-8
in the USA (UL) and Canada (cUL) for steel and CPVC plastic pipe and Fig.
Factory Mutual Engineering Approved (3/4” (20mm) thru 8” (200mm)). 200-1 to
Conforms to Federal Specifications WW-H-171E & A-A-1192A, Type 10 200-2
and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58,
Type 10.
Maximum Temperature: 650°F (343°C)
Finish: Pre-Galvanized. Stainless Steel
materials will be supplied with (2) hex nuts
Pipe Hangers
in place of a knurl nut.
Order By: Part number and pipe size
200-1/2 1/2" (15) 3/8"-16 M8 or M10 31/8" (79.4) 25/8" (66.7) 111/32" (34.1) 400 (1.78) 11 (5.0)
200-3/4 3/4" (20) 3/8"-16 M8 or M10 31/8" (79.4) 21/2" (63.5) 11/16" (27.0) 400 (1.78) 11 (5.0)
200-1 1" (25) 3/8"-16 M8 or M10 33/8" (85.7) 25/8" (66.7) 11/8" (28.6) 400 (1.78) 12 (5.5)
200-11/4 11/4" (32) 3/8"-16 M8 or M10 33/4" (94.0) 27/8" (73.0) 15/32" (29.3) 400 (1.78) 13 (5.9)
200-11/2 11/2" (40) 3/8"-16 M8 or M10 37/8" (98.4) 27/8" (73.0) 13/16" (30.2) 400 (1.78) 14 (6.4)
200-2 2" (50) 3/8"-16 M8 or M10 41/2" (114.3) 3" (76.3) 13/16" (30.2) 400 (1.78) 15 (6.9)
200-21/2 21/2" (65) 3/8"-16 M10 55/8" (142.9) 41/8" (104.7) 17/16" (36.5) 600 (2.67) 27 (12.3)
200-3 3" (75) 3/8"-16 M10 57/8" (149.1) 4" (101.6) 11/4" (31.7) 600 (2.67) 29 (13.3)
200-31/2 31/2" (90) 3/8"-16 M10 73/8" (187.3) 51/4" (133.3) 23/16" (55.6) 600 (2.67) 34 (15.6)
200-4 4" (100) 3/8"-16 M10 73/8" (187.3) 5" (127.0) 13/8" (34.9) 1000 (4.45) 35 (16.0)
200-5 5" (125) 1/2"-13 M12 91/8" (231.8) 61/4" (158.7) 311/32" (84.9) 1250 (5.56) 66 (30.2)
200-6 6" (150) 1/2"-13 M12 101/8" (257.2) 63/4" (171.4) 27/32" (56.3) 1250 (5.56) 73 (33.4)
200-8 8" (200) 1/2"-13 M12 131/8" (333.4) 83/4" (222.2) 37/32" (81.7) 1250 (5.56) 136 (62.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 60 Eaton
Pipe Hangers
TOLCO™ Fig. 200H - Heavy Duty Band Hanger (For Trapeze)
Size Range: 2” (50mm) thru 4” (100mm) trapeze pipe size.
Material: Steel — Pre-Galvanized to G40 Spec
Function: Designed primarily to support substantially heavier loads
than is normally intended for the nominal hanger size. Used
extensively to support trapeze installations and the increased loads
from both above and below the trapeze assembly.
Features: Furnished with 3/8"-16 or 1/2"-13 adjusting threaded ring nut.
B
Approvals: Underwriters Laboratories listed in the USA (UL) and
Canada** (cUL). Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 10 and Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58, Type 10. A
Note:
Select trapeze pipe size based on section modulus required for span of trapeze per information provided in
NFPA 13 (2002) Table 9.1.1.6.1 (a and b).
All sizes are UL Listed to support up to 8" pipe at max spacing per NFPA 13.
For 6” (150mm) and 8” (200mm) trapeze pipe, consult factory.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 61 B-Line series Pipe Hangers & Supports
Pipe Hangers
B3198H - Hinged Extension Split Pipe Clamp
A
Size Range: 3/8” (10mm) to 3” (80mm) pipe (Rod Size)
Material: Malleable Iron Hanger Rod
C Not Included
Function: Designed for suspending non-insulated pipe horizontally or vertically.
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25
and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12.
Standard Finish: Plain or Electro-Galvanized
Order By: Part number and finish.
A
B3198R - Extension Split Pipe Clamp (Rod Size)
Hanger Rod Not
Size Range: 3/8” (10mm) to 4” (100mm) pipe C Included
Pipe Hangers
Material: Malleable Iron
Function: Designed for suspending non-insulated pipe horizontally or vertically.
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25
and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12.
Standard Finish: Plain or Electro-Galvanized. Contact customer service for alternative
finishes and materials.
Order By: Part number and finish.
Rod
Pipe Size Thread Size C Design Load Approx. Wt./100
Part No. in. (mm) A in. (mm) Lbs. (kN) Lbs. (kg)
B3198R-3/8 3/8" (10) 3/8"-16 31/32" (24.6) 180 (.80) 12 (5.4)
B3198R-1/2 1/2" (15) 3/8"-16 11/16" (27.0) 180 (.80) 16 (7.2)
B3198R-3/4 3/4" (20) 3/8"-16 17/32" (30.9) 180 (.80) 18 (8.1)
B3198R-1 1" (25) 3/8"-16 111/32" (34.1) 180 (.80) 24 (10.9)
B3198R-11/4 11/4" (32) 3/8"-16 119/32" (39.7) 180 (.80) 29 (13.1)
B3198R-11/2 11/2" (40) 3/8"-16 123/32" (43.6) 180 (.80) 32 (14.5)
B3198R-2 2" (50) 3/8"-16 2" (50.8) 180 (.80) 39 (17.7)
B3198R-21/2 21/2" (65) 1/2"-13 211/32" (59.5) 300 (1.33) 115 (52.1)
B3198R-3 3" (80) 1/2"-13 223/32" (69.0) 300 (1.33) 140 (63.5)
B3198R-4 4" (100) 1/2"-13 311/32" (84.9) 300 (1.33) 160 (72.6)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 62 Eaton
Pipe Hangers
B3198HCT - Hinged Extension Split Pipe Clamp
Size Range: 1/2” (15mm) to 2” (50mm) copper tubing
A
Material: Malleable Iron (Rod Size)
Function: A rigid support to suspend tubing Hanger Rod
C Not Included
horizontally or vertically.
Approvals: Conforms to Federal Specification
WW-H-171E & A-A-1192A, Type 25 and Manufacturers
Standardization Society ANSI/MSS SP-69 & SP-58,
Type 12.
Standard Finish: DURA-COPPER™
Order By: Part number and finish.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 63 B-Line series Pipe Hangers & Supports
Pipe Hangers
B3175 - Ring and Bolt Hanger Bolt and Nut Included
Bolt Size
Size Range: 1/2” (15mm) to 6” (150mm) pipe
Material: Pre-Galvanized Steel Steel Size
Function: Designed for suspending light-weight non-insulated pipe.
(Use with B3222 eye socket or B3224 hanger adjuster).
C
Standard Finish: Pre-Galvanized
Order By: Part number and finish.
B3175-1/2 1/2" (15) 11/16" (27.0) 1/4"-20 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 7.5 (3.4)
B3175-3/4 3/4" (20) 13/16" (30.2) 1/4"-20 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 8.0 (3.6)
B3175-1 1" (25) 15/16" (33.3) 1/4"-20 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 9.0 (4.1)
B3175-11/4 11/4" (32) 11/2" (38.1) 1/4"-20 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 10.5 (4.7)
B3175-11/2 11/2" (40) 15/8" (41.3) 1/4"-20 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 11.5 (5.2)
B3175-2 2" (50) 113/16" (46.0) 1/4"-20 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 13.0 (5.9)
B3175-21/2 21/2" (65) 25/16" (58.7) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 30.0 (13.6)
B3175-3 3" (80) 25/8" (66.7) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 35.0 (15.9)
B3175-31/2 31/2" (90) 27/8" (73.0) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 38.5 (17.4)
B3175-4 4" (100) 31/8" (79.4) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 42.0 (19.0)
B3175-5 5" (125) 35/8" (92.1) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 51.0 (23.1)
B3175-6 6" (150) 43/16" (106.4) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 58.5 (26.5)
Pipe Hangers
Bolt Size
Size Range: 1/2” (15mm) to 4” (100mm) pipe
Material: Pre-Galvanized Steel Steel Size
B3175CT-1/2 1/2" (15) 15/16" (33.3) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 8 (3.6)
B3175CT-3/4 3/4" (20) 13/8" (34.9) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 8 (3.6)
B3175CT-1 1" (25) 13/16" (30.2) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 8 (3.6)
B3175CT-11/4 11/4" (32) 15/16" (33.3) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 10 (4.5)
B3175CT-11/2 11/2" (40) 11/2" (38.1) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 11 (5.0)
B3175CT-2 2" (50) 115/16" (49.2) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 11 (5.0)
B3175CT-21/2 21/2" (65) 23/16" (55.6) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 12 (5.4)
B3175CT-3 3" (80) 211/16" (68.3) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 14 (6.3)
B3175CT-31/2 31/2" (90) 215/16" (74.6) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 16 (7.2)
B3175CT-4 4" (100) 33/16" (81.0) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 18 (8.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 64 Eaton
Pipe Hangers
B3190 Return Line Offset J-Hook
Size Range: 1/2” (15mm) to 8” (200mm) pipe
Material: Steel (Stainless steel available)
Function: Recommended for supporting light pipe runs with a 1" (25.4) offset from mounting surfaces.
Standard Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials.
Order By: Part number and finish.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 65 B-Line series Pipe Hangers & Supports
Pipe Hangers
TOLCO™ Fig. 120RWA - (Model B) Retrofit Wrap Around “U” Hanger Clamp Component of State of
California OSHPD Approved
Size Range: 1" (25mm) thru 6" (150mm) pipe
Seismic Restraints System
Material: Steel
Function: Designed to restrain movement of the pipe within standard
U-hangers as required by NFPA 13. Where retrofit capability is crucial, the
Fig. 120RWA is a labor efficient alternative to the standard B-Line series
Fig. 120W wrap around U-hanger.
Features Installs easily by tightening two hex nuts. Features a unique
bracing slot that locks onto a standard U-hanger to become a solid unit that
will stabilize the pipe during seismic activity or sprinkler head activation.
Designed to be used in retrofit or new construction applications. Will clamp
to existing U-Hangers without restriction to leg angle.
Approvals: Underwriters Laboratories listed in the USA (UL) and Canada
(cUL) as a restrainer. Included in our Seismic Restraints Catalog approved by
the State of California Office of Statewide Health Planning and Development
(OSHPD). For additional load, spacing and placement information relating to
OSHPD projects, please refer to the B-Line series Seismic Restraint
Systems Guidelines. NFPA 13 (2010) 9.3.6.3.
Finish: Plain and Galvanized. Contact customer service for alternative
finishes and materials.
Order By: Part number, type numbers and pipe size
Ordering Note: Order by the following type and pipe size:
Type 1 — (1" (25mm) and 11/4" (32mm) pipe size)
Type 2 — (11/2" (40mm) and 2" (50mm) pipe size)
Type 3 — (21/2" (65mm) and 3" (80mm) pipe size)
Type 4 — (4" (100mm) pipe size)
Type 6 — (5" (125mm) and 6" (150mm) pipe size)
Important Note: The bracing slot feature is sized to fit the U-Hanger rod
schedule as required by NFPA 13 as follows:
Pipe Hangers
5/16" (7.9mm) rod for up to 2" (50mm) pipe
3/8" (9.5mm) rod for 21/2" (65mm) - 6" (160mm)
pipe
For other rod size requirements consult factory.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 66 Eaton
Pipe Hangers
TOLCO™ Fig. 120 - “U” Hanger
Size Range: Size 3/4" (20mm) thru 8" (200mm) pipe
Material: Steel
Function: Used to support piping from wood beams where
no contraction is expected. Used extensively in automatic A
fire sprinkler systems.
Approvals: Meets or exceeds the requirements of National
Fire Protection Association (NFPA), Pamphlet 13. Included
in our Seismic Restraints Catalog approved by the State of
California Office of Statewide Health Planning and
Development (OSHPD). For additional load, spacing and
placement information relating to OSHPD projects, please
refer to the Seismic Restraint Systems Guidelines.
Length
Maximum Temperature: 750°F (399°C)
(Specify)
Finishes: Plain, Electro Galvanized, Hot-Dip Galvanized,
SS4 or SS6.
Order By: Part number, pipe size, length and finish
Pipe Hangers
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 67 B-Line series Pipe Hangers & Supports
Pipe Hangers
TOLCO™ Fig. 120MJ - Mutt & Jeff “U” Hanger
Size Range: Size 3/4" (20mm) thru 8" (200mm) pipe
Material: Steel
Function: Used to support piping from wood beams where no A
contraction is expected. Used extensively in automatic fire
sprinkler systems. Fig. 120MJ is used when the wood beam is
on a diagonal.
Finishes: Plain, Electro Galvanized, Hot-Dip Galvanized,
SS4 or SS6.
Order By: Part number, side length and finish
Length
(Specify)
Pipe Hangers
TOLCO™ Fig. 120W - Wrap Around “U” Hanger
Size Range: Size 3/4" (20mm) thru 2" (50mm) pipe
Material: Steel
Function: Required for automatic fire protection agencies
to be used on the end of branch lines to prevent pipe from
whipping vertical and striking ceiling or beam. A
Length
(Specify)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 68 Eaton
Pipe Hangers
A
B3262 Light Duty Spring Hanger (Rod Size)
Rod Size Range: 3/8”-16 to 3/4”-10 C
Material: Steel
Service: Designed for use with a light piping system
where vertical movement does not exceed 11/4" (31.7).
Approvals: Conforms to Federal Specification WW-H-171E D
& A-A-1192A, Type 49 and Manufacturers Standardization
Society ANSI/MSS SP-69 & SP-58, Type 48.
Order By: Part number.
A
(Rod Size)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 69 B-Line series Pipe Hangers & Supports
Pipe Hangers
BH-2-4, BH-5-8, BH-9-12 - Parallel Strap Hangers
BH-2-4-R, BH-5-8-R, BH-9-12-R - Right Angle Strap Hangers
Material: Steel
Function: The Parallel Strap Hanger series is
designed for suspending up to 1" (50.8) wide
straps parallel to beams.
The Right Angle Strap Hanger series is designed
for suspending up to 1" (50.8) wide straps at right
angle to the beam.
Note: Install clip to beam with hammer. Right Angle
Parallel
Standard Finish: Zinc Phosphate Strap Strap
Order By: Part number and finish.
Approx. Wt./100
Part No. Flange Thickness Maximum Load BH-2-12 BH-2-12R
Parallel Right Angle In. (mm) Lbs. (kN) Lbs. (kg) Lbs. (kg)
BH-2-4 BH-2-4-R 1/8" to 1/4" (3.2 to 6.3) 200 (.89) 4.5 (2.0) 6.0 (2.7)
BH-5-8 BH-5-8-R 5/16" to 1/2" (7.9 to 12.7) 200 (.89) 5.0 (2.3) 6.5 (2.9)
BH-9-12 BH-9-12-R 9/16" to 3/4" (14.3 to 19.0) 200 (.89) 5.5 (2.5) 7.0 (3.2)
BL1400 - Hanger W
Size Range: 1/2” (15mm) to 4” (100mm) pipe
Pipe Hangers
Material: Steel Pipe Size
Function: Designed to support or suspend light T
duty stationary pipe runs.
Standard Finish: Electro-Galvanized. A
Also available in Stainless Steel Type 304 (SS4)
Order By: Part number. Hole Size B
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 70 Eaton
Pipe Clamps
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. A wide range of
pipe clamps are available for various applications.
Materials
Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-
Galvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating,
DURA GREEN™, DURA-COPPER™ and other special coatings are available upon request.
Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly
Pipe Clamps
coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be supplied
Electro-Plated, Copper Plated, or in Stainless Steel.
All pipe hangers and supports in this section are sized to fit schedule 40/80 pipe unless otherwise noted. Some steel items
may be specially fabricated to fit other pipe diameters i.e. ductile iron, cast iron, etc. Select pipe O.D. from charts on pages
307 thru 312.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 71 B-Line series Pipe Hangers & Supports
Pipe Clamps
B3373 - Standard Riser Clamp
B3373F - Felt Lined Standard Riser Clamp for Copper Tubing
B3373C - PVC Coated Standard Riser Clamp
Size Range: (B3373) 1/2" (15mm) thru 30" (760mm) pipe
(B3373F) 1/2" (15mm) thru 21/2" (65mm) copper tubing
(B3373C) 1/2" (15mm) thru 6" (150mm) pipe Design Load
Material: Steel
Insulation Material: (B3373F) 1/8" (3.2mm) thick felt.
Function: Used for supporting vertical piping.
Approvals: Underwriters Laboratories Listed in the USA (UL), Canada (cUL)
3/4" (20mm) - 8" (200mm).
Factory Mutual Engineering Approved (FM) for plain and electro-Galvanized zinc,
3/4" (20mm) thru 8" (200mm). Conforms to Federal Specification WW-H-171E &
Bolt Size
A-A-1192A, Type 8 and Manufacturers Standardization Society ANSI/MSS SP-69 &
SP-58, Type 8.
Maximum Temperature: 650°F (343°C) L
Finish: Plain. Contact customer service for alternative finishes and materials. Bolts and Nuts Included
Order By:
(B3373 and B3373C) pipe size and finish.
B3373F is available for Iron Pipe Size, consult factory.
B3373
B3373C B3373F
B3373-1/2 1/2" (15) 9" (228.6) 3/8"-16 x 11/4" 255 (1.13) 101 (45.9)
B3373-3/4 3/4" (20) 91/4" (234.9) 3/8"-16 x 11/4" 255 (1.13) 105 (47.7)
Notes: For ductile iron
(D.I.) pipe use part
B3373-1 1" (25) 99/16" (242.9) 3/8"-16 x 11/4" 255 (1.13) 109 (49.4) number B3373DI-pipe
B3373-11/4 11/4" (32) 10" (254.0) 3/8"-16 x 11/4" 255 (1.13) 112 (50.9) size. Contact B-Line
B3373-11/2 11/2" (40) 101/4" (260.3) 3/8"-16 x 11/2" 255 (1.13) 113 (51.1) Engineering for more
information.
B3373-2 2" (50) 103/4" (273.0) 3/8"-16 x 11/2" 255 (1.13) 165 (75.0)
Pipe Clamps
B3373-21/2 21/2" (65) 111/4" (285.7) 3/8"-16 x 11/2" 390 (1.73) 180 (81.6)
B3373-3 3" (80) 1115/16" (303.2) 3/8"-16 x 11/2" 530 (2.35) 195 (88.4)
B3373-31/2 31/2" (90) 123/8" (314.3) 1/2"-13 x 13/4" 670 (2.98) 217 (98.5)
B3373-4 4" (100) 127/8" (327.0) 1/2"-13 x 13/4" 810 (3.60) 228 (103.5)
B3373-5 5" (125) 14" (355.6) 1/2"-13 x 13/4" 1160 (5.16) 480 (217.7)
B3373-6 6" (150) 153/16" (385.8) 1/2"-13 x 2" 1570 (6.98) 526 (238.6)
B3373-8 8" (200) 173/4" (450.8) 5/8"-11 x 21/2" 2500 (11.12) 957 (434.1)
B3373-10 10" (250) 197/16" (493.7) 5/8"-11 x 21/2" 2500 (11.12) 1101 (499.4)
B3373-12 12" (300) 2111/16" (550.9) 5/8"-11 x 3" 2700 (12.01) 1622 (735.7)
B3373-14 14" (350) 239/16" (598.5) 5/8"-11 x 3" 2700 (12.01) 1732 (785.6)
B3373-16 16" (400) 263/8" (669.9) 3/4"-10 x 31/4" 2900 (12.90) 2959 (1342.2)
B3373-18 18" (450) 287/8" (733.4) 3/4"-10 x 31/4" 2900 (12.90) 3235 (1467.4)
B3373-20 20" (500) 307/8" (784.2) 3/4"-10 x 31/2" 2900 (12.90) 3568 (1618.4)
B3373-24 24" (600) 347/8" (885.8) 3/4"-10 x 31/2" 2900 (12.90) 4064 (1843.3)
B3373-30 30" (750) 403/4" (1035.0) 7/8"-9 x 31/2" 2900 (12.90) 6016 (2728.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 72 Eaton
Pipe Clamps
B3373CT - Copper Tubing Riser Clamp
B3373CTC - PVC Coated Cooper Tubing Riser Clamp
Size Range: — Size 1/2" (15mm) thru 6" (150mm) copper tubing
Design Load
Material: — Steel
Function: — Used for supporting vertical copper tubing.
Approvals: — Conforms to Federal Specification WW-H-171E &
A-A-1192A Type 8 and Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58 Type 8.
Finish: — DURA-COPPER™
Note: — Available with plastic coating, specify by ordering B3373CTC
Order By: — Part number and nominal tubing size Bolt Size
B3373CT B3373CTC
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 73 B-Line series Pipe Hangers & Supports
Pipe Clamps
B3132 - Two-Bolt Underground Clamp
Size Range: 4" (100mm) thru 24" (600mm) pipe
Steel Size
Material: Steel
Function: Clamp is used for underground A.W.W.A. cast iron and
ductile iron water pipe to prevent joints from separating. The O.D. of Bolt Size
the A.W.W.A. pipe is shown in the data table. A
Finish: Plain. Contact customer service for alternative finishes and
materials. B
Bolts and Nuts Included
Order By: Part number, pipe size and outside diameter of pipe.
Order B3132W lugs, tie rods and hex nuts separately.
B3132-4 4" (100) 127/8" (327.0) 93/4" (247.6) 5" (127.0) 1/2" x 2" (12.7 x 50.8) 5/8"-11 x 3" 864 (391.9)
B3132-6 6" (150) 143/4" (374.6) 12" (304.8) 71/16" (179.4) 1/2" x 2" (12.7 x 50.8) 5/8"-11 x 3" 1020 (462.6)
B3132-8 8" (200) 171/4" (438.1) 141/4" (361.9) 93/16" (233.4) 1/2" x 2" (12.7 x 50.8) 5/8"-11 x 3" 1222 (554.3)
B3132-10 10" (250) 193/8" (492.1) 161/2" (419.1) 113/8" (288.9) 1/2" x 2" (12.7 x 50.8) 5/8"-11 x 3" 1409 (639.1)
B3132-12 12" (300) 217/8" (555.6) 187/8" (479.4) 131/2" (342.9) 1/2" x 2" (12.7 x 50.8) 5/8"-11 x 3" 1608 (729.4)
B3132-14 14" (350) 26" (660.4) 221/4" (565.1) 153/4" (400.0) 3/4" x 3" (19.0 x 76.2) 7/8"-9 x 41/2" 4359 (1977.2)
B3132-16 16" (400) 283/8" (720.7) 245/8" (625.5) 177/8" (454.0) 3/4" x 4" (19.0 x 101.6) 1"-8 x 41/2" 6403 (2904.4)
B3132-18 18" (450) 313/8" (796.9) 275/8" (701.7) 20" (508.0) 3/4" x 4" (19.0 x 101.6) 11/4"-7 x 5" 7293 (3308.1)
B3132-20 20" (500) 331/2" (850.9) 293/4" (755.6) 221/8" (562.0) 3/4" x 41/2" (19.0 x 114.3) 11/4"-7 x 5" 8778 (3981.7)
B3132-24 24" (600) 39" (990.6) 351/4" (895.3) 263/8" (669.9) 3/4" x 5" (19.0 x 127.0) 11/4"-6 x 51/2" 11659 (5288.5)
Pipe Clamps
Function: Used with B3132 to secure tie rods. The projecting
F
lug bears against the clamp bolt to prevent washer and tie rod H H
from slipping off clamp.
G G
Finish: Plain. Contact customer service for alternative finishes B3132W-3/4 B3132W-1
and materials. thru 11/2
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 74 Eaton
Pipe Clamps
B3134 - Double Bolt Underground Socket Clamp
Size Range: 4" (100mm) thru 24" (600mm) pipe
Material: Steel
A
Function: Clamp is used for underground A.W.W.A. cast iron and
ductile iron water pipe to prevent joints from separating. The O.D. of
the A.W.W.A. pipe is shown in the data table.
Approvals: Conforms to National Fire Protection Association (NFPA)
Pamphlet 24, 4" (100mm) thru 12" (300mm) pipe sizes.
Finish: Plain. Contact customer service for alternative finishes and
materials.
B
Order By: Part number, pipe size and
outside diameter of pipe.
Order B3134W plate washers, tie rods
and hex nuts separately.
B3134W-3/4 3/4"-10 3" (76.2) 1/2" (12.7) 7/8" (22.2) 120 (54.4)
B3134W-1 1"-8 31/2" (88.9) 1/2" (12.7) 11/8" (28.6) 157 (71.2)
B3134W-11/8 1
1 /8"-7 31/2" (88.9) 5/8" (15.9) 11/4" (31.7) 194 (88.0)
B3134W-11/4 11/4"-7 31/2" (88.9) 3/4" (19.0) 13/8" (35.8) 230 (104.3)
B3134W-11/2 11/2"-6 31/2" (88.9) 3/4" (19.0) 15/8" (41.2) 240 (108.8˛)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 75 B-Line series Pipe Hangers & Supports
Pipe Clamps
TOLCO™ Fig. 4A - Pipe Clamp for Sway Bracing Component of State of
California OSHPD Approved
Size Range: 4" (100mm) thru 8" (200mm) pipe. Seismic Restraints System
For sizes smaller than 4" (100mm) use B3140.
Material: Steel B
Function: For bracing pipe against sway and seismic disturbance.
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada
(cUL) 4" (100mm) thru 8" (200mm). Included in our Seismic Restraints Catalog
approved by the State of California Office of Statewide Health Planning and
Development (OSHPD). A
Installation Instructions: The Fig. 4A is the "braced pipe" attachment
component of a longitudinal, lateral or riser brace assembly. It is intended to D
be combined with the "bracing pipe" and B-Line/TOLCO transitional and
structural attachment component(s) to form a complete bracing assembly.
NFPA 13 and/or OSHPD guidelines should be followed.
To Install: Place the Fig. 4A over the pipe to be braced. Attach TOLCO C
transitional fitting, either Fig. 980, 910 or 909, to the clamp ears. Tighten bolts
and nuts; torque requirement is a minimum of 50 ft./lbs. (68Nm).
Transitional fitting attachment can pivot for adjustment to proper brace angle.
Finish: Plain. Contact customer service for alternative finishes and materials.
Order By: Part number, pipe size and finish
Fig. 4A Fig. 4A -
Longitudinal Brace Lateral Brace
Pipe Clamps
(UL Listed Up to 4” (100mm) IPS)
4A-4 4" (100) 81/2" (215.9) 9/16" (14.3) 33/8" (85.7) 311/16" (93.7) 1/2"-13 2015 (8.96) 221 (100.2)
4A-5 5" (125) 93/4" (247.6) 9/16" (14.3) 37/8" (98.4) 43/8" (111.1) 1/2"-13 2015 (8.96) 253 (114.7)
4A-6 6" (150) 111/2" (292.1) 5/8" (15.9) 5" (127.0) 51/8" (130.2) 1/2"-13 2015 (8.96) 513 (232.7)
4A-8 8" (200) 131/4" (336.5) 3/4" (19.0) 611/16" (169.9) 61/8" (155.6) 1/2"-13 2015 (8.96) 601 (272.6)
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 76 Eaton
Pipe Clamps
B3140 - Standard Pipe Clamp Component of State of
California OSHPD Approved
B3140F - Standard Pipe Clamp Felt Lined for Copper Tubing Seismic Restraints System
B3140C - Standard Pipe Clamp PVC Coated
Size Range: B3140/B3140C Size 1/2" (15mm) thru 30" (750mm) pipe.
B3140F Size 1/2" (15mm) thru 21/2" (65mm) copper tubing
Material: Steel
Function: Recommended for the suspension of non-insulated pipe Bolt Size
or insulated pipe with B3151 shields. (Use B3200 weldless eye nut,
B3210 eye rod or B3211 welded eye rod.) B3140F and B3140C are
designed to reduce noise and vibration and/or prevent electrolysis.
Approvals: Underwriters Laboratories Listed in the USA (UL), Canada
B
(cUL) 3/4" (20mm) - 12" (300mm), and approved by Factory Mutual C
Engineering (FM), 3/4" (20mm) - 8" (200mm). Federal Specification
WW-H-171E & A-A-1192A, Type 4, and Manufacturers Standardization
Society ANSI/MSS SP-69 & SP-58, Type 4. Included in our Seismic
Restraints Catalog approved by the State of California Office of B
Statewide Health Planning and Development (OSHPD). For additional C A
load, spacing and placement information relating to OSHPD projects,
please refer to the Seismic Restraint Systems Guidelines.
Note: For piping that requires sway bracing refer to Fig. 4A.
Maximum Temperature: — 750°F (399°C)
Finish: Plain. Contact customer service for alternative finishes and
materials.
Order By: Part number, pipe size and finish.
Order Note: When ordering B3140F allow for 3/16" (4.8mm) felt on
each half of clamp.
Pipe Clamps
B3140
B3140F
B3140C
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 77 B-Line series Pipe Hangers & Supports
Pipe Clamps
B3140 - Standard Pipe Clamp
B3140F - Standard Pipe Clamp Felt Lined
B3140C - Standard Pipe Clamp PVC Coated cont.
Pipe
Part Size A B C Bolt
No. in. (mm) in. (mm) in. (mm) in. (mm) Size
B3140-1/2 1/2" (15) 3/8" (9.5) 31/32" (24.6) 117/32" (38.9) 5/16"-18
B3140-3/4 3/4" (20) 9/16" (14.3) 13/32" (27.8) 121/32" (42.0) 5/16"-18
B3140-1 1" (25) 9/16" (14.3) 15/16" (33.3) 17/8" (47.6) 5/16"-18
B3140-11/4 11/4" (32) 17/32" (13.5) 17/16" (36.5) 2" (50.8) 5/16"-18
B3140-11/2 11/2" (40) 19/32" (15.1) 121/32" (42.0) 27/32" (56.4) 5/16"-18
B3140-2 2" (50) 9/16" (14.3) 21/8" (54.0) 23/4" (69.8) 1/2"-13
B3140-21/2 1
2 /2" (65) 5/8" (15.9) 221/32" (67.5) 39/32" (83.3) 1/2"-13
B3140-3 3" (75) 5/8" (15.9) 215/16" (74.6) 39/16" (90.5) 1/2"-13
B3140-31/2 31/2" (90) 5/8" (15.9) 35/32" (80.1) 325/32" (96.0) 1/2"-13
B3140-4 4" (100) 3/4" (19.0) 39/16" (90.5) 45/16" (109.5) 5/8"-11
B3140-5 5" (125) 3/4" (19.0) 41/8" (104.8) 47/8" (123.8) 5/8"-11
B3140-6 6" (150) 7/8" (22.2) 415/16" (125.4) 513/16" (147.6) 3/4"-10
B3140-8 8" (200) 1" (25.4) 61/16" (154.0) 615/16" (176.2) 3/4"-10
B3140-10 10" (250) 1" (25.4) 73/8" (187.3) 811/16" (220.7) 7/8"-9
B3140-12 12" (300) 1" (25.4) 87/16" (214.3) 93/4" (247.6) 7/8"-9
B3140-14 14" (350) 11/8" (28.6) 91/4" (234.9) 105/8" (269.9) 7/8"-9
B3140-16 16" (400) 11/8" (28.6) 101/4" (260.3) 115/8" (295.3) 7/8"-9
B3140-18 18" (450) 11/4" (31.7) 117/8" (301.6) 131/4" (336.5) 1"-8
B3140-20 20" (500) 13/8" (34.9) 123/4" (323.8) 141/8" (358.8) 11/8"-7
B3140-24 24" (600) 15/8" (41.3) 151/4" (387.3) 167/8" (428.6) 11/4"-7
B3140-30 30" (750) 21/4" (57.1) 185/8" (473.1) 21" (533.4) 11/2"-6
Pipe Clamps
B3140-11/2 11/2" (40) 800 (3.56) 620 (2.76) 41 (18.6)
B3140-2 2" (50) 1040 (4.62) 810 (3.60) 118 (53.5)
B3140-21/2 21/2" (65) 1040 (4.62) 810 (3.60) 130 (58.9)
B3140-3 3" (75) 1040 (4.62) 810 (3.60) 150 (68.0)
B3140-31/2 1
3 /2" (90) 1040 (4.62) 810 (3.60) 158 (71.6)
B3140-4 4" (100) 1040 (4.62) 810 (3.60) 239 (108.4)
B3140-5 5" (125) 1040 (4.62) 810 (3.60) 272 (123.4)
B3140-6 6" (150) 1615 (7.18) 1260 (5.60) 541 (245.4)
B3140-8 8" (200) 1615 (7.18) 1260 (5.60) 642 (291.2)
B3140-10 10" (250) 2490 (11.07) 1950 (8.67) 1366 (619.6)
B3140-12 12" (300) 2490 (11.07) 1950 (8.67) 1543 (699.9)
B3140-14 14" (350) 2490 (11.07) 1950 (8.67) 2077 (942.1)
B3140-16 16" (400) 2490 (11.07) 1950 (8.67) 2289 (1038.3)
B3140-18 18" (450) 3060 (13.61) 2390 (10.63) 3206 (1454.2)
B3140-20 20" (500) 3060 (13.61) 2390 (10.63) 3616 (1640.2)
B3140-24 24" (600) 3060 (13.61) 2390 (10.63) 5161 (2341.0)
B3140-30 30" (750) 3500 (15.57) 2740 (12.14) 10460 (4744.6)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 78 Eaton
Pipe Clamps
B3141 - A.W.W.A. Pipe Clamp
Size Range: 4" (100mm) thru 24" (600mm) pipe A
Material: Steel
Function: Recommended for the suspension of flanged or bell and spigot
A.W.W.A. cast iron or ductile iron pipe. The O.D. of the A.W.W.A. iron pipe
is shown in the data table. Used with B3200 weldless eye nut, B3210 eye
rod or B3211 welded eye rod.
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A,
Type 4, and Manufacturers Standardization Society ANSI/MSS SP-69 &
SP-58, Type 4.
B
Maximum Temperature: 650°F (343°C)
Finish: Plain or Electro-Galvanized
Note: Available in HDG finish or Stainless Steel materials.
B
Order By: Part number, pipe size and finish
No. in. (mm) in. (mm) in. (mm) Size lbs. (kN) lbs. (kg)
B3141-4 4.80" (121.9) 11/8" (28.6) 41/16" (103.2) 5/8"-11 1400 (6.23) 860 (390.1)
B3141-6 6.90" (175.2) 11/8" (28.6) 51/16" (128.6) 5/8"-11 1400 (6.23) 1060 (480.8)
B3141-8 9.05" (229.9) 11/8" (28.6) 63/16" (157.2) 5/8"-11 1400 (6.23) 1230 (557.9)
B3141-10 11.10" (281.9) 11/8" (28.6) 71/4" (184.1) 5/8"-11 1400 (6.23) 1430 (648.6)
B3141-12 13.20” (335.3) 11/8" (28.6) 85/16" (211.1) 5/8"-11 1400 (6.23) 1630 (739.3)
B3141-14 15.30" (388.6) 13/4" (44.4) 97/8" (250.7) 3/4"-10 2000 (8.89) 2300 (1043.3)
B3141-16 17.40" (441.9) 13/4" (44.4) 115/16" (287.3) 7/8"-9 2500 (11.12) 3725 (1689.6)
B3141-18 19.50" (495.3) 17/8" (47.6) 129/16" (319.1) 1"-8 3000 (13.34) 4200 (1905.1)
B3141-20 21.60" (548.6) 2" (50.8) 135/8" (346.1) 1"-8 3100 (13.79) 4575 (2075.2)
B3141-24 25.80" (655.3) 2" (50.8) 165/16" (414.3) 11/4"-7 4500 (20.01) 6400 (2903.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 79 B-Line series Pipe Hangers & Supports
Pipe Clamps
B3142 - Heavy Duty Pipe Clamp
Size Range: 3" (80mm) thru 24" (600mm) pipe
A
Material: Steel
Function: Recommended for the suspension of heavy-duty pipe lines.
(Use with B3200 weldless eye nut, B3210 eye rod or B3211 welded eye rod). C
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A,
Type 4, and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58,
Type 4.
Maximum Temperature: 750°F (399°C)
Finish: Plain or Electro-Galvanized and HDG. B
Order By: Part number, pipe size and finish
B3142-3 3" (80) 1" (25.4) 3" (76.2) 41/8" (104.8) 3/4"-10 3370 (14.99) 3005 (13.36) 498 (225.9)
B3142-4 4" (100) 1" (25.4) 311/16" (93.7) 415/16" (125.4) 7/8"-9 3515 (15.63) 3135 (13.94) 634
Pipe Clamps
(287.6)
B3142-5 5" (125) 1" (25.4) 45/16" (109.5) 59/16" (141.3) 7/8"-9 3515 (15.63) 3135 (13.94) 714 (323.9)
B3142-6 6" (150) 11/8" (28.6) 53/16" (131.8) 611/16" (169.9) 1"-8 4865 (21.64) 4340 (19.30) 1351 (612.8)
B3142-8 8" (200) 11/8" (28.6) 61/4" (158.7) 73/4" (196.8) 1"-8 4865 (21.64) 4340 (19.30) 1573 (713.5)
B3142-10 10" (250) 11/4" (31.7) 77/8" (200.0) 91/2" (241.3) 11/4"-7 6010 (26.73) 5360 (23.84) 2537 (1150.8)
B3142-12 12" (300) 15/8" (41.3) 91/2" (241.3) 115/8" (295.3) 11/2"-6 8675 (38.58) 7740 (34.43) 4300 (1950.5)
B3142-14 14" (350) 15/8" (41.3) 101/8" (257.2) 121/4" (311.1) 11/2"-6 9120 (40.56) 8135 (36.18) 5228 (2371.4)
B3142-16 16" (400) 15/8" (41.3) 113/16" (284.2) 135/16" (338.1) 11/2"-6 9120 (40.56) 8135 (36.18) 5657 (2566.0)
B3142-18 18" (450) 15/8" (41.3) 123/16" (309.6) 145/16" (363.5) 11/2"-6 9150 (40.70) 8160 (36.29) 6914 (3136.2)
B3142-20 20" (500) 15/8" (41.3) 135/16" (338.1) 157/16" (392.1) 11/2"-6 9150 (40.70) 8160 (36.29) 7468 (3387.5)
B3142-24 24" (600) 13/4" (44.4) 153/8" (390.5) 173/4" (450.8) 11/2"-6 9200 (40.92) 8205 (36.49) 12629 (5728.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 80 Eaton
Pipe Clamps
Component of State of
B3144 - Standard Double Bolt Pipe Clamp California OSHPD Approved
Seismic Restraints System
Size Range: — 1/2" (15mm) thru 36" (900mm) pipe.
Material: — Steel A
Function: — Recommended for the suspension of pipe requiring up to
4" (101.6mm) of insulation and where flexibility of the clamp may be
necessary. Use B3200 weldless eye nut, B3210 eye rod or B3211
welded eye rod. Also recommended for the attachment of sway bracing
up to 8" (203.2mm). Refer to B-Line/TOLCO State of California Approved Spacer
Seismic Restraint Product Manual.
Approvals: — Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 3 and Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58, Type 3. Included in our Seismic Restraints
Catalog approved by the State of California Office of Statewide Health C
B
Planning and Development (OSHPD). For additional load, spacing and
placement information relating to OSHPD projects, please refer to the
B-Line/TOLCO Seismic Restraint Systems Guidelines.
Maximum Temperature: 750°F (399°C)
E
Finish: Plain. Contact customer service for alternative finishes and
materials. D
Order By: Part number, pipe size and finish.
Pipe
Part Size A B C D E
No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3144-1/2 1/2" (15) 3/8" (9.5) 213/16" (71.4) 23/16" (55.6) 11/2" (38.1) 7/8" (22.2)
B3144-3/4 3/4" (20) 5/8" (15.9) 3" (76.2) 23/8" (60.2) 111/16" (42.9) 11/16" (27.0)
B3144-1 1" (25) 5/8" (15.9) 31/4" (82.5) 25/8" (66.7) 115/16" (49.2) 15/16" (33.3)
B3144-11/4 1
1 /4" (32) 5/8" (15.9) 31/2" (88.9) 27/8" (72.9) 23/16" (58.7) 19/16" (39.7)
B3144-11/2 11/2" (40) 1" (25.4) 53/8" (136.5) 41/2" (114.3) 25/8" (66.7) 13/4" (44.4)
B3144-2 2" (50) 1" (25.4) 513/16" (147.6) 415/16" (125.4) 215/16" (74.6) 21/16" (52.4)
B3144-21/2 21/2" (65) 1" (25.4) 61/8" (155.6) 51/4" (133.3) 31/4" (82.5) 23/8" (60.3)
Pipe Clamps
B3144-3 3" (75) 1" (25.4) 63/4" (171.4) 57/8" (149.2) 35/8" (92.1) 211/16" (68.3)
B3144-31/2 31/2" (90) 1" (25.4) 73/16" (182.6) 65/16" (160.3) 37/8" (98.4) 3" (76.2)
B3144-4 4" (100) 1" (25.4) 73/4" (196.8) 65/8" (168.3) 411/16" (119.1) 39/16" (90.5)
B3144-5 5" (125) 1" (25.4) 89/16" (217.5) 77/16" (189.5) 55/16" (134.9) 43/16" (106.4)
B3144-6 6" (150) 1
1 /2" (38.1) 97/8" (250.8) 81/2" (215.9) 61/8" (155.6) 43/4" (120.6)
B3144-8 8" (200) 11/2" (38.1) 11" (279.4) 95/8" (244.5) 75/16" (185.7) 515/16" (150.8)
B3144-10 10" (250) 11/2" (38.1) 12" (304.8) 101/2" (266.7) 87/8" (225.4) 75/16" (185.7)
B3144-12 12" (300) 11/2" (38.1) 131/8" (333.4) 115/8" (295.3) 915/16" (252.4) 87/16" (214.3)
B3144-14 14" (350) 2" (50.8) 145/16" (363.5) 129/16" (319.1) 115/16" (287.3) 99/16" (242.9)
B3144-16 16" (400) 2" (50.8) 159/16" (395.3) 1313/16" (350.8) 125/16" (312.7) 109/16" (268.3)
B3144-18 18" (450) 2" (50.8) 167/8" (428.6) 151/8" (384.2) 133/8" (339.7) 115/8" (295.3)
B3144-20 20" (500) 2" (50.8) 181/4" (463.5) 163/8" (415.9) 151/8" (384.2) 131/4" (336.5)
B3144-24 24" (600) 2" (50.8) 207/16" (519.7) 187/16" (468.3) 175/16" (439.7) 155/16" (388.9)
B3144-30 30" (750) 21/2" (63.5) 26" (660.4) 23" (584.2) 22" (558.8) 19" (482.6)
B3144-36 36" (900) 21/2" (63.5) 323/8" (822.2) 287/8" (733.4) 255/8" (650.9) 221/8" (562.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 81 B-Line series Pipe Hangers & Supports
Pipe Clamps
B3144 - Standard Double Bolt Pipe Clamp cont.
Component of State of
California OSHPD Approved
A Seismic Restraints System
Spacer
C
B
Pipe Clamps
B3144-3 3" (75) 5/8"-11 1545 (6.87) 1380 (6.14) 289 (131.1)
B3144-31/2 31/2" (90) 5/8"-11 1545 (6.87) 1380 (6.14) 315 (142.9)
B3144-4 4" (100) 3/4"-10 2500 (11.12) 2230 (9.92) 745 (337.9)
B3144-5 5" (125) 3/4"-10 2500 (11.12) 2230 (9.92) 828 (375.6)
B3144-6 6" (150) 7/8"-9 2865 (12.74) 2555 (11.36) 1261 (572.0)
B3144-8 8" (200) 7/8"-9 2865 (12.74) 2555 (11.36) 1535 (696.3)
B3144-10 10" (250) 1"-8 3240 (14.41) 2890 (12.85) 2173 (985.7)
B3144-12 12" (300) 1"-8 3240 (14.41) 2890 (12.85) 2404 (1090.4)
B3144-14 14" (350) 11/4"-7 4300 (19.12) 3835 (17.06) 4002 (1815.3)
B3144-16 16" (400) 11/4"-7 4300 (19.12) 3835 (17.06) 4362 (1978.6)
B3144-18 18" (450) 11/4"-7 4300 (19.12) 3835 (17.06) 4935 (2238.5)
B3144-20 20" (500) 13/8"-6 5490 (24.42) 4900 (21.79) 6570 (2980.1)
B3144-24 24" (600) 13/8"-6 4500 (20.01) 4015 (17.86) 7524 (3412.9)
B3144-30 30" (750) 13/8"-6 7500 (33.36) -- (--) 19502 (8846.1)
B3144-36 36" (900) 13/4"-5 10500 (46.70) -- (--) 23488 (10654.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 82 Eaton
Pipe Clamps
B3146 - Heavy Duty Double Bolt Pipe Clamp A
Pipe Size A B C D E
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3146-6 6" (150) 13/4" (44.4) 103/16" (258.8) 815/16" (227.0) 6" (152.4) 43/4" (120.6)
B3146-8 8" (200) 2" (50.8) 113/8" (288.9) 101/8" (257.2) 71/4" (184.1) 6" (152.4)
B3146-10 10" (350) 21/4" (57.1) 131/8" (333.4) 113/8" (288.9) 9" (228.6) 71/4" (184.1)
B3146-12 12" (300) 21/2" (63.5) 145/16" (363.5) 129/16" (319.1) 103/8" (263.5) 85/8" (219.1)
B3146-14 14" (450) 21/2" (63.5) 151/2" (393.7) 131/2" (342.9) 115/8" (295.3) 95/8" (244.5)
B3146-16 16" (400) 3" (76.2) 171/8" (435.0) 147/8" (377.7) 131/8" (333.4) 107/8" (276.2)
B3146-18 18" (550) 31/2" (88.9) 181/4" (463.5) 161/4" (412.7) 141/2" (368.3) 121/2" (317.5)
B3146-20 20" (500) 31/2" (88.9) 193/4" (501.6) 171/4" (438.1) 16" (406.4) 131/2" (342.9)
B3146-24 24" (600) 31/2" (88.9) 223/8" (568.3) 195/16" (490.5) 181/2" (469.9) 151/2" (393.7)
B3146-30 30" (750) 41/4" (107.9) 323/4" (831.8) 281/4" (717.5) 243/8" (619.1) 197/8" (504.8)
B3146-36 36" (900) 41/2" (107.9) 401/4" (1022.3) 343/4" (882.6) 301/8" (765.2) 225/8" (574.7)
Pipe Clamps
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 83 B-Line series Pipe Hangers & Supports
Pipe Clamps
Component of State of
TOLCO™ Fig. 4B - Pipe Clamp for Sway Bracing California OSHPD Approved
Size Range: 3/4” (20mm) to 8” (200mm) pipe Seismic Restraints System
Material: Steel
Function: For bracing pipe against sway and seismic disturbance
C
Approvals: Included in the Seismic Restraints Catalog approved by the A
State of California Office of Statewide Health Planning and Development
(OSHPD).
B
Standard Finish: Plain or Electro-Galvanized. Contact customer service
for alternative finishes and materials. D
Pipe Size Rod Size B C D Bolt Size Design Load Approx. Wt./100
Part No. in. (mm) A in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
4B-3/4 3/4" (20) 3/8"-16 1" (25.4) 27/8" (73.0) 25/8" (66.7) 5/16"-18 330 (1.47) 56 (3.6)
4B-1 1" (25) 3/8"-16 1" (25.4) 31/4" (82.5) 215/16" (74.6) 5/16"-18 330 (1.47) 60 (3.6)
4B-11/4 11/4" (32) 3/8"-16 1" (25.4) 39/16" (90.6) 31/4" (82.5) 5/16"-18 330 (1.47) 74 (4.5)
Pipe Clamps
4B-11/2 11/2" (40) 3/8"-16 1" (25.4) 313/16" (96.8) 37/16" (87.3) 5/16"-18 330 (1.47) 79 (5.0)
4B-2 2" (50) 3/8"-16 11/2" (38.1) 51/8" (130.2) 45/8" (117.5) 5/16"-18 440 (1.78) 156 (5.0)
4B-21/2 21/2" (65) 1/2"-13 13/4" (44.4) 55/8" (142.9) 53/8" (136.5) 3/8"-16 440 (1.78) 176 (5.4)
4B-3 3" (80) 1/2"-13 17/8" (47.6) 63/4" (171.4) 61/8" (155.5) 3/8"-16 660 (2.93) 198 (6.3)
4B-31/2 31/2" (90) 1/2"-13 2" (50.8) 71/4" (184.1) 63/4" (171.4) 3/8"-16 660 (2.93) 219 (7.2)
4B-4 4" (100) 5/8"-11 2" (50.8) 85/8" (219.1) 71/4" (184.1) 1/2"-13 800 (3.56) 288 (8.1)
4B-5 5" (125) 5/8"-11 2" (50.8) 97/8" (250.8) 85/16" (211.1) 5/8"-11 980 (4.36) 390 (8.1)
4B-6 6" (150) 3/4"-10 21/8" (54.0) 1015/16" (277.8) 91/2" (241.3) 5/8"-11 980 (4.36) 448 (8.1)
4B-8 8" (200) 7/8"-9 21/8" (54.0) 137/16" (341.2) 111/2" (292.1) 3/4"-10 1200 (5.34) 691 (8.1)
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 84 Eaton
Pipe Clamps
B3148 - Offset Pipe Clamp Design Load
Size Range: 1/2" (15mm) thru 12" (300mm) pipe Bolts and Nuts Included
Material: Steel
Function: Recommended for support of pipe lines running at a Bolt Size
B
definite distance from the wall or floor of a building or structure.
A
Maximum Temperature: — 650°F (343°C) C
H
Finish: Plain or Electro-Galvanized. 2 Holes
Contact customer service for alternative finishes and materials.
Note: Special “A” dimensions available on request,
consult factory.
Order By: Part number, pipe size and finish
B3148-10 10" (250) 73/8" (187.3) 3/4"-10 211/2" (546.1) 13/16" (20.6) 925 (4.11) 1238 (561.5)
B3148-12 12" (300) 83/8" (212.7) 3/4"-10 247/8" (631.8) 13/16" (20.6) 1225 (5.45) 2100 (952.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 85 B-Line series Pipe Hangers & Supports
Pipe Clamps
B3149 - Extended Pipe Clamp
Size Range: 3/4" (20mm) thru 8" (200mm) pipe
Material: Steel Bolt Size
Function: For suspending or supporting piping runs where the B
pipe cannot be determined until installation. Field modify to suit A
conditions. C
Maximum Temperature: 650°F (343°C)
Finish: Plain or Electro-Galvanized.
Contact customer service for alternative finishes and materials.
Note: Special “A” dimensions available on request, consult factory.
Order By: Part number, pipe size and finish
B3149-3/4 3/4" (20) 12" (304.8) 3/8"-16" 47/16" (112.7) 225 (102.0)
B3149-1 1" (25) 12" (304.8) 3/8"-16" 411/16" (119.1) 230 (104.3)
B3149-11/4 11/4" (32) 12" (304.8) 3/8"-16" 5" (127.0) 235 (106.6)
B3149-11/2 11/2" (40) 12" (304.8) 3/8"-16" 51/4" (133.3) 240 (108.8)
B3149-2 2" (50) 12" (304.8) 1/2"-13" 6" (152.4) 345 (156.5)
B3149-21/2 21/2" (65) 12" (304.8) 1/2"-13" 71/4" (184.1) 360 (163.3)
B3149-3 3" (75) 12" (304.8) 1/2"-13" 77/8" (200.0) 375 (170.1)
B3149-31/2 31/2" (90) 12" (304.8) 1/2"-13" 83/8" (212.7) 390 (176.9)
B3149-4 4" (100) 12" (304.8) 1/2"-13" 91/4" (234.9) 500 (226.8)
Pipe Clamps
B3149-5 5" (125) 12" (304.8) 1/2"-13" 101/2" (266.7) 545 (247.2)
B3149-6 6" (150) 12" (304.8) 5/8"-11" 121/2" (317.5) 870 (394.6)
B3149-8 8" (200) 12" (304.8) 5/8"-11" 145/8" (371.5) 980 (444.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 86 Eaton
Pipe Clamps
B3180FL - Flush Mount Pipe Strap
Size Range: 1/2" (15mm) thru 8" (200mm) pipe
Material: Steel
Function: Recommended for supporting pipe with fittings
vertically or horizontally to walls or ceiling. Supports pipe A
flush with the mounting surface.
C
Approvals: Conforms to Federal Specification WW-H-171E B
& A-A-1192A, Type 26 and Manufacturers Standardization
D
Society ANSI/MSS SP-69 & SP-58, Type 26.
Finish: Plain
Note: Available in Electro-Galvanized and
HDG finish or Stainless Steel materials.
Order By: Part number, pipe size and material/finish
Part Pipe Size A B C D Hole Size Max. Rec. Load Approx. Wt./100
No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3180FL-1/2 1/2" (15) 41/8" (104.8) 5/16" (7.9) 27/8" (73.0) 3/4" (19.0) 7/16 (11.1) 410 (1.82) 21 (9.5)
B3180FL-3/4 3/4" (20) 45/16" (109.5) 7/16" (11.1) 3" (76.2) 15/16" (23.8) 7/16" (11.1) 410 (1.82) 24 (10.9)
B3180FL-1 1" (25) 49/16" (115.9) 9/16" (14.3) 33/8" (85.7) 11/8" (28.6) 7/16" (11.1) 410 (1.82) 26 (11.8)
B3180FL-11/4 11/4" (32) 415/16" (125.4) 11/16" (17.5) 33/4" (95.2) 11/2" (38.1) 7/16" (11.1) 410 (1.82) 30 (13.6)
Pipe Clamps
B3180FL-11/2 11/2" (40) 53/16" (131.8) 13/16" (20.6) 41/4" (107.9) 15/8" (41.3) 7/16" (11.1) 410 (1.82) 33 (14.9)
B3180FL-2 2" (50) 53/4" (146.0) 11/16" (27.0) 43/4" (120.6) 21/4" (57.1) 7/16" (11.1) 410 (1.82) 38 (17.2)
B3180FL-21/2 21/2" (65) 61/4" (158.7) 19/16" (39.7) 51/4" (133.3) 23/4" (69.8) 7/16" (11.1) 610 (2.71) 102 (46.2)
B3180FL-3 3" (75) 67/8" (174.6) 15/8" (41.3) 57/8" (149.2) 33/8" (85.7) 7/16" (11.1) 610 (2.71) 118 (53.5)
B3180FL-31/2 31/2" (90) 73/8" (187.3) 17/8" (47.6) 63/8" (161.9) 37/8" (98.3) 7/16" (11.1) 610 (2.71) 130 (58.9)
B3180FL-4 4" (100) 83/8" (212.7) 21/8" (53.9) 7" (177.8) 43/8" (111.1) 9/16" (14.3) 725 (3.22) 159 (72.1)
B3180FL-5 5" (125) 97/16" (239.7) 25/8" (66.7) 77/8" (200.0) 53/8" (136.5) 9/16" (14.3) 725 (3.22) 191 (86.6)
B3180FL-6 6" (150) 101/2" (266.7) 33/16" (80.9) 87/8" (225.4) 67/16" (163.5) 9/16" (14.3) 725 (3.22) 234 (106.1)
B3180FL-8 8" (200) 14" (355.6) 41/4" (107.9) 111/2" (292.1) 83/8" (212.7) 11/16" (17.5) 900 (4.00) 446 (202.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 87 B-Line series Pipe Hangers & Supports
Pipe Clamps
B3180 - Standard Pipe Strap
Size Range: 1/2" (15mm) thru 8" (200mm) pipe
Material: Steel
Function: Recommended for supporting pipe with fittings A
vertically or horizontally to walls or ceiling.
C
Approvals: Conforms to Federal Specification WW-H-171E &
B
A-A-1192A, Type 26 and Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58, Type 26. D
Finish: Plain
Note: Available in Electro-Galvanized and
HDG finish or Stainless Steel materials.
Order By: Part number, pipe size and material/finish
Part Pipe Size A B C D Hole Size Max. Rec. Load Approx. Wt./100
No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3180-1/2 1/2" (15) 37/8" (98.4) 3/4" (19.0) 31/16" (77.8) 15/32" (11.9) 7/16 (11.1) 410 (1.82) 16 (7.2)
B3180-3/4 3/4" (20) 4" (101.6) 13/16" (20.6) 31/8" (79.4) 15/16" (33.3) 7/16" (11.1) 410 (1.82) 21 (9.5)
B3180-1 1" (25) 49/16" (115.9) 7/8" (22.2) 33/8" (85.7) 11/2" (38.1) 7/16" (11.1) 410 (1.82) 26 (11.8)
B3180-11/4 11/4" (32) 415/16" (125.4) 1" (25.4) 33/4" (95.2) 17/8" (47.6) 7/16" (11.1) 410 (1.82) 30 (13.6)
Pipe Clamps
B3180-11/2 11/2" (40) 53/16" (131.8) 13/16" (30.2) 41/4" (107.9) 21/8" (54.6) 7/16" (11.1) 410 (1.82) 33 (14.9)
B3180-2 2" (50) 53/4" (146.0) 17/16" (36.5) 43/4" (120.6) 25/8" (66.7) 7/16" (11.1) 410 (1.82) 38 (17.2)
B3180-21/2 21/2" (65) 61/4" (158.7) 111/16" (42.9) 51/4" (133.3) 31/8" (79.4) 7/16" (11.1) 610 (2.71) 102 (46.2)
B3180-3 3" (75) 67/8" (174.6) 2" (50.8) 57/8" (149.2) 33/4" (95.2) 7/16" (11.1) 610 (2.71) 118 (53.5)
B3180-31/2 31/2" (90) 73/8" (187.3) 21/4" (57.1) 63/8" (161.9) 41/4" (107.9) 7/16" (11.1) 610 (2.71) 130 (58.9)
B3180-4 4" (100) 83/8" (212.7) 21/2" (63.5) 7" (177.8) 43/4" (120.6) 9/16" (14.3) 725 (3.22) 159 (72.1)
B3180-5 5" (125) 97/16" (239.7) 31/16" (77.8) 77/8" (200.0) 513/16" (147.6) 9/16" (14.3) 725 (3.22) 191 (86.6)
B3180-6 6" (150) 101/2" (266.7) 35/8" (92.1) 87/8" (225.4) 67/8" (174.6) 9/16" (14.3) 725 (3.22) 234 (106.1)
B3180-8 8" (200) 14" (355.6) 45/8" (117.5) 111/2" (292.1) 9" (228.6) 11/16" (17.5) 900 (4.00) 446 (202.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 88 Eaton
Pipe Clamps
B2400 - Standard Pipe Strap
Design Load 1
Size Range: 1/2" (15mm) thru 24" (600mm) pipe Pipe Size
Material: Steel
Function: Designed for supporting pipe runs from
strut supports.
Approvals: Underwriters Laboratories Listed for
B2400-3/4" thru B2400-8" for Design Load 1 only.
Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 26 and Manufacturers Hole Sized For
Bolt Size A
Standardization Society ANSI/MSS SP-69 & SP-58, Design
Type 26. Load 3 C
Finish: Electro-Galvanized. Contact customer service T
for alternative finishes and materials.
B
Order By: Part number, pipe size and finish
Note: Ductile iron sizes available.
Special “B” dimensions available on request, W
consult factory.
Design Load 2
B2400-1/2 1/2” (15) 1/4” 7/16” (11.1) 213/16” (71.4) 10 Ga. (3.4) 15/8” (41.3)
B2400-3/4 3/4” (20) 1/4” 7/16” (11.1) 3” (76.2) 10 Ga. (3.4) 15/8” (41.3)
B2400-1 1” (25) 1/4” 7/16” (11.1) 317/32” (89.7) 10 Ga. (3.4) 15/8” (41.3)
B2400-11/4 11/4” (32) 1/4” 7/16” (11.1) 33/4” (95.2) 10 Ga. (3.4) 15/8” (41.3)
B2400-11/2 11/2” (40) 1/4” 7/16” (11.1) 41/16” (103.2) 10 Ga. (3.4) 15/8” (41.3)
B2400-2 2” (50) 3/8” 11/16” (17.4) 521/32” (143.6) 1/4” (6.3) 15/8” (41.3)
B2400-21/2 21/2” (65) 3/8” 11/16” (17.4) 65/32” (156.3) 1/4” (6.3) 15/8” (41.3)
B2400-3 3” (80) 3/8” 11/16” (17.4) 625/32” (172.2) 1/4” (6.3) 15/8” (41.3)
Pipe Clamps
B2400-31/2 31/2” (90) 3/8” 11/16” (17.4) 79/32” (184.9) 1/4” (6.3) 15/8” (41.3)
B2400-4 4” (100) 1/2” 11/16” (17.4) 725/32” (197.6) 1/4” (6.3) 15/8” (41.3)
B2400-5 5” (125) 1/2” 11/16” (17.4) 87/8” (225.4) 1/4” (6.3) 15/8” (41.3)
B2400-6 6” (150) 1/2” 11/16” (17.4) 915/16” (252.4) 1/4” (6.3) 15/8” (41.3)
B2400-8 8” (200) 1/2” 11/16” (17.4) 1131/32” (304.0) 1/4” (6.3) 15/8” (41.3)
B2400-10 10” (250) 1/2” 11/16” (17.4) 14” (355.6) 1/4” (6.3) 15/8” (41.3)
B2400-12 12” (300) 1/2” 11/16” (17.4) 16” (406.4) 1/4” (6.3) 15/8” (41.3)
B2400-14 14” (350) 7/8” 15/16” (33.3) 203/8” (517.5) 3/8” (9.5) 13/4” (44.4)
B2400-16 16” (400) 7/8” 15/16” (33.3) 223/8” (568.3) 3/8” (9.5) 13/4” (44.4)
B2400-18 18” (450) 7/8” 15/16” (33.3) 261/8” (663.6) 1/2” (12.7) 13/4” (44.4)
B2400-20 20” (500) 7/8” 15/16” (33.3) 281/8” (714.4) 1/2” (12.7) 13/4” (44.4)
B2400-24 24” (600) 7/8” 15/16” (33.3) 321/8” (816.0) 1/2” (12.7) 13/4” (44.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 89 B-Line series Pipe Hangers & Supports
Pipe Clamps
B2400 - Standard Pipe Strap cont.
Design Load 1
Pipe Size
Design Load 1
Only
Design Load 2
Pipe Clamps
B2400-3 1200 (5.34) 480 (2.14) 300 (1.33) 132 (59.9)
B2400-31/2 1200 (5.34) 480 (2.14) 300 (1.33) 151 (68.5)
B2400-4 1500 (6.67) 600 (2.67) 450 (2.00) 160 (72.6)
B2400-5 1500 (6.67) 600 (2.67) 450 (2.00) 192 (87.1)
B2400-6 1500 (6.67) 600 (2.67) 450 (2.00) 219 (99.3)
B2400-8 2000 (8.90) 800 (3.56) 600 (2.67) 297 (134.7)
B2400-10 2000 (8.90) 800 (3.56) 600 (2.67) 465 (210.9)
B2400-12 2000 (8.90) 800 (3.56) 600 (2.67) 560 (254.0)
B2400-14 2000 (8.90) 800 (3.56) 600 (2.67) 761 (345.2)
B2400-16 2000 (8.90) 800 (3.56) 600 (2.67) 861 (390.5)
B2400-18 2000 (8.90) 800 (3.56) 600 (2.67) 1297 (588.3)
B2400-20 2000 (8.90) 800 (3.56) 600 (2.67) 1426 (646.8)
B2400-24 2000 (8.90) 800 (3.56) 600 (2.67) 1682 (762.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 90 Eaton
Pipe Clamps
BVT Series - Vibra-Clamp™
• Easy one tool installation.
Design Load 1
• Temperature Range:
-40°F (-40°C) to +300°F (148.9°C)
Design Load 2 A
• Dampens vibration and noise.
• Eliminates galvanic corrosion due to
B metal to metal contact.
INE
B-L150 .P
BVP/2”.I
1 1
• Resists most industrial oils and solvents.
• Secures tubing firmly to strut channel.
Design Load 3
C
Dimensions Wt.
Part O.D. Size Pipe Size A B C Each
No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kg)
BVT025 1/4" (6.3) 1/8" (3) 1.22" (30.9) 0.19" (4.8) 0.49" (12.4) .11 (.05)
BVT037 3/8" (9.5) 1/4" (6) 1.36" (34.5) 0.25" (6.3) 0.61" (15.5) .12 (.05)
BVT050 1/2" (12.7) 3/8" (10) 1.49" (37.8) 0.31" (7.8) 0.74" (18.8) .14 (.06)
BVT062 5/8" (15.9) 1/2" (15) 1.62" (41.1) 0.38" (9.6) 0.86" (21.8) .15 (.07)
BVT075 3/4" (19.0) 5/8" (17) 1.87" (47.4) 0.50" (12.7) 1.15" (29.2) .19 (.08)
BVT087 7/8" (22.2) 3/4" (20) 2.00" (50.8) 0.56" (14.2) 1.27" (32.2) .21 (.09)
BVT112 11/8" (28.6) 1" (25) 2.25" (57.1) 0.69" (17.5) 1.52" (38.6) .26 (.12)
BVT137 13/8" (34.9) 11/4" (32) 2.51" (63.7) 0.81" (20.6) 1.78" (45.2) .38 (.17)
BVT162 15/8" (41.3) 11/2" (40) 3.00" (76.2) 1.00" (25.4) 2.20" (55.9) .40 (.18)
BVT212 21/8" (54.0) 2" (50) 3.52" (89.4) 1.25" (31.7) 2.70" (68.6) .55 (.25)
BVT262 25/8" (66.6) 21/2" (65) 4.02" (102.1) 1.50" (38.1) 3.20" (81.3) .55 (.25)
BVT312 31/8" (79.4) 3" (80) 4.53" (115.0) 1.75" (44.4) 3.70" (93.9) .64 (.29)
BVT362 35/8" (92.1) 31/2" (90) 5.05" (128.2) 2.00" (50.8) 4.23" (107.4) .76 (.34)
BVT412 41/8" (104.8) 4" (100) 5.55" (140.9) 2.25" (57.1) 4.73" (120.1) .93 (.42)
BVT612 61/8" (155.5) 6" (150) 7.62" (193.5) 3.25" (82.5) 6.74" (171.1) 1.36 (.61)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 91 B-Line series Pipe Hangers & Supports
Pipe Clamps
BVP Series - Vibra-Clamp™
• Easy one tool installation. Design Load 1
• Temperature Range: -40°F (-40°C) to +300°F (148.9°C)
• Dampens vibration and noise. A
• Eliminates galvanic corrosion due to Design Load 2
metal to metal contact. INE
B-L150 .P B
BVP/2”.I
• Resists most industrial oils and solvents. 1 1
Design Load 3 C
Dimensions Wt.
Part O.D. Size Pipe Size A B C Each
No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kg)
BVP025 0.540" (13.7) 1/4" (6) 1.61" (39.9) 0.37" (9.4) 0.87" (22.1) .15 (.07)
BVP037 0.675" (17.1) 3/8" (10) 1.86" (47.2) 0.50" (12.7) 1.15" (29.2) .18 (.08)
BVP050 0.875" (22.2) 1/2" (15) 1.99" (50.5) 0.56" (14.2) 1.27" (32.3) .20 (.09)
BVP075 1.050" (26.7) 3/4" (20) 2.25" (57.1) 0.69" (17.5) 1.52" (38.6) .21 (.09)
BVP100 1.312" (33.3) 1" (25) 2.51" (63.8) 0.81" (20.6) 1.77" (45.0) .20 (.09)
BVP125 1.660" (42.2) 11/4" (32) 3.00" (76.2) 1.00" (25.4) 2.21" (56.1) .36 (.16)
BVP150 1.900" (48.3) 11/2" (40) 3.21" (81.5) 1.12" (28.4) 2.41" (61.2) .40 (.18)
BVP200 2.375" (60.3) 2" (50) 3.77" (95.8) 1.37" (34.8) 2.96" (75.2) .45 (.20)
BVP250 2.875" (73.0) 21/2" (65) 4.28" (108.7) 1.62" (41.1) 3.46" (87.9) .54 (.24)
BVP300 3.500" (88.9) 3" (80) 5.05" (128.3) 2.00" (50.8) 4.24" (107.7) .81 (.37)
BVP350 4.000" (101.6) 31/2" (90) 5.55" (140.9) 2.25" (57.1) 4.74" (120.3) .87 (.39)
BVP400 4.500" (114.3) 4" (100) 6.05" (153.7) 2.50" (63.5) 5.24" (133.1) 1.09 (.49)
BVP500 5.563" (141.3) 5" (125) 6.84" (173.7) 3.00" (76.2) 6.24" (158.4) 1.36 (.61)
BVP600 6.625" (168.3) 6" (150) 8.24" (209.3) 3.56" (90.4) 7.36" (186.9) 1.63 (.74)
Pipe Clamps
BVP037 600 (2.67) 75 (0.33) 75 (0.33)
BVP050 600 (2.67) 75 (0.33) 75 (0.33)
BVP075 600 (2.67) 75 (0.33) 75 (0.33)
BVP100 600 (2.67) 75 (0.33) 75 (0.33)
BVP125 800 (3.56) 125 (0.55) 125 (0.55)
BVP150 800 (3.56) 125 (0.55) 125 (0.55)
BVP200 800 (3.56) 125 (0.55) 125 (0.55)
BVP250 800 (3.56) 125 (0.55) 125 (0.55)
BVP300 1000 (4.45) 200 (0.89) 150 (0.67)
BVP350 1000 (4.45) 200 (0.89) 150 (0.67)
BVP400 1000 (4.45) 200 (0.89) 150 (0.67)
BVP500 1000 (4.45) 200 (0.89) 150 (0.67)
BVP600 1000 (4.45) 200 (0.89) 150 (0.67)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 92 Eaton
Pipe Clamps
Armafix®† IPH Series
Inserts Only - Inserts with Clamps
• Engineered load-bearing inserts prevents insulation 3/4”
compression Wall Insulation Thickness
• Innovative insulated pipe support Assembly Insert Only Pipe/Copper/OD Hanger
• Desirable “Foam-to-Foam” Bond Part No. Part No. Size Size*
• Slip Data: 45 lbs. (0.20 kN) max 3/8” O.D.
• Recommended Clamp Torque: 12-15 in-lbs. (1.3-1.7 Nm) IPH03834 IPH03834WO 2”
• Service Temperature Range IPH01234 IPH01234WO 1/2” O.D. 2”
-58°F (-50°C) to +220°F (+105°C) IPH05834 IPH05834WO 5/8” O.D. 2”
IPH07834 IPH07834WO 3/4” O.D. & 7/8” O.D. 21/2”
IPH11834 IPH11834WO 3/4” IPS & 11/8” O.D. 21/2”
IPH13834 IPH13834WO 13/8” O.D. 3”
IPH15834 IPH15834WO 15/8” O.D. 31/2”
IPH11034 IPH11034WO 11/2” IPS & 17/8” O.D. 31/2”
IPH21834 IPH21834WO 21/8” O.D. 4”
IPH25834 IPH25834WO 25/8” O.D. 5”
Insert Only Assembly IPH31834 IPH31834WO 31/8” O.D. 5”
Insert & Clamp IPH35834 IPH35834WO 35/8” O.D. 6”
1/2” IPH41834 IPH41834WO 41/8” O.D. 6”
Wall Insulation Thickness
IPH40034 IPH40034WO 4” IPS 6”
Assembly Insert Only Pipe/Copper/OD Hanger IPH50034 IPH50034WO 5” IPS 8”
Part No. Part No. Size Size*
IPH60034 IPH60034WO 6” IPS 10”
IPH03812 IPH03812WO 3/8” O.D. 11/4”
IPH80034 IPH80034WO 8” IPS 12”
IPH01212 IPH01212WO 1/2” O.D. 11/4”
5/8” O.D. * Recommended pipe hanger size for insulation thickness
IPH05812 IPH05812WO 11/2” shown. (Order hanger separately)
IPH07812 IPH07812WO /4” O.D. & 7/8” O.D.
3 2”
IPH11812 IPH11812WO 3/4” IPS & 11/8” O.D. 2”
IPH13812 IPH13812WO 13/8” O.D. 21/2” 1” Wall Insulation Thickness
IPH15812 IPH15812WO 15/8” O.D. 21/2” Assembly Insert Only Pipe/Copper/OD Hanger
IPH11012 IPH11012WO 11/2” IPS & 17/8” O.D. 3” Part No. Part No. Size Size*
IPH05810 IPH05810WO 5/8” O.D. 21/2”
IPH21812 IPH21812WO 21/8” O.D. 3”
IPH25812 IPH25812WO 25/8” O.D. 31/2” IPH07810 IPH07810WO /4” O.D. & 7/8” O.D.
3 3”
IPH31812 IPH31812WO 31/8” O.D. 4” IPH11810 IPH11810WO 3/4” IPS & 11/8” O.D. 3”
IPH35812 IPH35812WO 35/8” O.D. 5” IPH13810 IPH13810WO 13/8” O.D. 31/2”
IPH41812 IPH41812WO 41/8” O.D. 6” IPH15810 IPH15810WO 15/8” O.D. 31/2”
IPH40012 IPH40012WO 4” IPS 6” IPH11010 IPH11010WO 1 /2” IPS & 17/8” O.D.
1 4”
Pipe Clamps
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 93 B-Line series Pipe Hangers & Supports
Pipe Clamps
B1999 - Vibra-Cushion™
ISO - ISO-PIPE™
Pipe Clamps
dissimilar metal contact
• Service Temperature Range
-140° F (-95°C) to +395°F (+200°C)
• 1” (25.4mm) wide x 0.02” (0.5mm) thick
• Packaged - 36 Ft. (10.97m) per carton
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 94 Eaton
Pipe Clamps
TOLCO™ Fig. 22 - Hanger for CPVC Plastic Pipe
Single Fastener Strap
Size Range: 3/4" (20mm) thru 2" (50mm) CPVC pipe
Material: Pre-Galvanized Steel C
Function: Intended to perform as a hanger to support CPVC piping used
in automatic fire sprinkler systems. The product acts as a hanger when tab
is upward and the fastener screw is in the horizontal position. Fig. 22 can
be installed on the top of a beam, but in this situation acts as a guide to the
piping which is supported by the beam itself. It is not intended to support
CPVC pipe from under a flat horizontal surface, such as a ceiling.
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada
(cUL) to support fire sprinkler piping. May be installed in wood using
fasteners supplied with product, or into minimum 20 gauge (0.9mm) steel using
(1) 1/4" x 1" tek type screw. Meets and exceeds the requirements of NFPA 13,
13R and 13D. A
Features: Fig. 22 incorporates features which protect the pipe and ease B
installation. The flared edge design protects CPVC pipe from any rough
surface. It is easily attached to the building structure using the special UL
Listed hex head self threading screw* furnished with the product. It is
recommended that rechargeable electric drills fitted with a hex socket
attachment to be used as installation tools. No impact tools (such as a
hammer) are allowed. Damage has been known to result from installations
using impact type tools. No pre-drilling of a pilot hole in wood is
required.
Finish: Pre-Galvanized
Order By: Part number and CPVC pipe size.
* Hardened hex head self threading screw is furnished with the
product and is the minimum fastener size acceptable.
22-3/4 3/4" (20) 27/16" (61.9) 15/16" (33.3) 13/16" (30.2) 51/2 (1.67) 5/16" (7.9) 9 (4.1)
22-1 1" (25) 211/16" (68.3) 17/16" (36.5) 13/16" (30.2) 6 (1,83) 5/16" (7.9) 9 (4.1)
22-11/4 11/4" (32) 31/16" (77.8) 15/8" (42.3) 13/16" (30.2) 61/2 (1.98) 5/16" (7.9) 11 (5.0)
22-11/2 11/2" (40) 35/16" (84.1) 13/4" (44.4) 13/16" (30.2) 7 (2.13) 5/16" (7.9) 12 (5.4)
22-2 2" (50) 33/4" (95.2) 21/8" (54.6) 13/16" (30.2) 8 (2.44) 5/16" (7.9) 15 (6.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 95 B-Line series Pipe Hangers & Supports
Pipe Clamps
TOLCO™ Fig. 22L2 - One Hole Hanger/Restrainer for CPVC & Steel Pipe
Size Range: 3/4" (20mm) thru 2" (50mm) CPVC & steel pipe
Material: Pre-Galvanized Steel
Function: cULus Listed to perform as a hanger and restrainer for CPVC or IPS
piping systems. The innovative design also allows for a preferred installation C
location close to a CPVC fitting without applying damaging compression forces
on the pipe which could result in serious Mechanical ESC (Environmental
Stress Cracking). A
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada
(cUL) to support fire sprinkler piping. May be installed in wood using
fasteners supplied with product, or into minimum 20 gauge (0.9mm) steel using
(1) 1/4" x 1" tek type screw. Meets and exceeds the requirements of NFPA 13,
13R and 13D.
Installation Note: Comes in open position for easier installation. Because of
multi – structural installation possibilities, specific fastener not included; see
notes below for various applications.
For Concrete Installation — UL requires a minimum test load of 340 lbs. (1.5kN)
for CPVC hangers and 750 lbs. (3.3kN) for steel pipe hangers; verify anchors meet
or exceed these requirements.
For Wood Installation — Test results have shown that #14 x 11/2” wood B
screws will support the required load for c UL us.
For Steel Installation — Test results have shown that 1/4” x 1” (min. 20ga
steel) Tek type screw will support required UL load.
Finish: Pre-Galvanized
Order By: Part number
Patent Pending
Mounting
MOUNTING SURFACE
Surface
Hanger/Restrainer
HANGER/RESTRAINER
Tab DOWN
TAB Down
or TAB
or Tab UP
Up
Pipe Clamps
Sprinkler
SPRINKLER
Head
HEAD
Pipe OD
PIPE OD
Offset
OFFSET
DESIGN
Design
Hanger/Restrainer
HANGER/RESTRAINER Fitting
FITTING OD
OD
22L2-3/4 3/4" (20) 23/16" (55.6) 15/16" (23.8) 3/4" (19.0) 51/2 (1.67) NA (NA) 9 (4.1)
22L2-1 1" (25) 21/2" (63.5) 11/8" (28.6) 3/4" (19.0) 6 (1,83) 12 (3.66) 9 (4.1)
22L2-11/4 1
1 /4" (32) 213/16" (71.4) 11/4" (31.7) 3/4" (19.0) 1
6 /2 (1.98) 12 (3.66) 11 (5.0)
22L2-11/2 11/2" (40) 31/8" (79.4) 17/16" (36.5) 3/4" (19.0) 7 (2.13) 15 (4.57) 12 (5.4)
22L2-2 2" (50) 39/16" (90.5) 15/8" (41.3) 3/4" (19.0) 8 (2.44) 15 (4.57) 15 (6.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 96 Eaton
Pipe Clamps
TOLCO™ Fig. 23 - Hanger for CPVC Plastic Pipe
Double Fastener Strap
Size Range: 3/4" (20mm) thru 3" (80mm) CPVC pipe
Material: Pre-Galvanized Steel
Function: Intended to perform as a hanger to support CPVC piping
used in automatic fire sprinkler systems. Fig. 23 can be installed
on the top, bottom or side of a beam.
Approvals: Underwriters Laboratories Listed in the USA (UL)
and Canada (cUL) sizes 3/4" (20mm) thru 2" (50mm) to support fire
sprinkler piping. May be installed in wood using fasteners supplied
with product, or into minimum 20 gauge (0.9mm) steel using
(2) 1/4" x 1" tek type screw. Meets and exceeds the requirements
of NFPA 13, 13R and 13D.
Features: Fig. 23 incorporates features which protect the pipe B
and ease installation. The flared edge design protects the CPVC
pipe from any rough surface. It also incorporates snap restrainers
allowing easier and faster installation. Easily attaches to the building B A
structure using the two UL Listed hex head self threading screws* C
furnished with the product. It is recommended that rechargeable
electric drills fitted with a hex socket attachment be used as
installation tools. No impact tools (such as a hammer) are allowed.
Damage has been known to result from installations using impact
type tools. No pre-drilling of a pilot hole in wood is required.
Finish: Pre-Galvanized
Order By: Part number and pipe size
* Hardened hex head self threading screw is furnished with the
product and is the minimum fastener size acceptable.
Part No. in. (mm) in. (mm) in. (mm) in. (mm) Ft. (m) in. (mm) Lbs. (kg)
23-3/4 3/4" (20) 31/8" (79.4) 19/16" (39.7) 13/16" (30.2) 51/2 (1.67) 5/16" (7.9) 9 (4.1)
23-1 1" (25) 33/8" (85.7) 111/16" (42.9) 13/16" (30.2) 6 (1,83) 5/16" (7.9) 9 (4.1)
23-11/4 1
1 /4" (32) 43/16" (106.4) 23/32" (53.1) 13/16" (30.2) 1
6 /2 (1.98) 5/16" (7.9) 11 (5.0)
23-11/2 11/2" (40) 47/16" (112.7) 27/32" (56.3) 13/16" (30.2) 7 (2.13) 5/16" (7.9) 12 (5.4)
23-2 2" (50) 47/8" (123.8) 27/16" (61.9) 13/16" (30.2) 8 (2.44) 5/16" (7.9) 15 (6.8)
23-21/2 21/2" (65) 53/8" (136.5) 211/16" (68.3) 13/16" (30.2) Consult Factory 5/16" (7.9) 22 (10.0)
23-3 3" (80) 6" (152.4) 3" (76.2) 13/16" (30.2) Consult Factory 5/16" (7.9) 25 (11.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 97 B-Line series Pipe Hangers & Supports
Pipe Clamps
TOLCO™ Fig. 24 - Hanger for CPVC Plastic Pipe
Double Fastener Strap Side Mounted
Size Range: 3/4" (20mm) thru 2" (50mm) CPVC pipe
Material: Pre-Galvanized Steel
Function: Intended to perform as a hanger to support CPVC piping used in C
automatic fire sprinkler systems. Can be installed on the top or on the bottom
of a beam.
Approvals: Underwriters Laboratories Listed in the USA (UL) and
Canada (cUL) to support fire sprinkler piping. May be installed in wood using
fasteners supplied with product, or into minimum 20 gauge (0.912mm) steel
using (2) 1/4" x 1" tek type screws. Meets and exceeds the requirements of
NFPA 13, 13R and 13D.
Features: Fig. 24 incorporates features which protect the pipe and
ease installation. The flared edge design protects the CPVC pipe from
any rough surface. Easily attaches to the building structure using the two
UL Listed hex head self threading screws* furnished with the product. It
is recommended that rechargeable electric drills fitted with a hex socket
attachment be used as installation tools. No impact tools (such as a hammer)
are allowed. Damage has been known to result from installations using B
impact type tools. No pre-drilling of a pilot hole in wood is required.
B
Finish: Pre-Galvanized A
Order By: Part number and pipe size
* Hardened hex head self threading screw is furnished with the
product and is the minimum fastener size acceptable.
Pipe Clamps
24-3/4 3/4" (20) 25/16" (58.7) 15/32" (27.8) 13/16" (30.2) 51/2 (1.67) 5/16" (7.9) 9 (4.1)
24-1 1" (25) 25/8" (66.7) 15/16" (33.3) 13/16" (30.2) 6 (1,83) 5/16" (7.9) 9 (4.1)
24-11/4 11/4" (32) 3" (76.2) 11/2" (38.1) 13/16" (30.2) 61/2 (1.98) 5/16" (7.9) 11 (5.0)
24-11/2 11/2" (40) 1
3 /4" (82.5) 15/8" (42.3) 13/16" (30.2) 7 (2.13) 5/16" (7.9) 12 (5.4)
24-2 2" (50) 311/16" (93.7) 127/32" (43.6) 13/16" (30.2) 8 (2.44) 5/16" (7.9) 15 (6.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 98 Eaton
Pipe Clamps
TOLCO™ Fig. 25 - Surge Restrainer
Size Range: — One size fits 3/4" (20mm) thru 2" (40mm) pipe.
Material: — Pre-Galvanized Steel
Function: — Designed to be used in conjunction with Fig. 200 band hangers
to restrict the upward movement of piping as it occurs during sprinkler head
activation or earthquake type activity. The surge restrainer is easily and
efficiently installed by snapping into a locking position on the band hanger.
This product is intended to satisfy the requirements as indicated in the National
Fire Protection Association NFPA 13, 2010 edition, 9.2.3.4.4.1 and 9.2.3.4.4.4
Can be used to restrain either steel pipe or CPVC plastic Pipe.
Approvals: — Underwriters Laboratories Listed only when used with band
hanger Fig. 200, in the USA (UL) and Canada (cUL).
Finish: Pre-Galvanized
Order By: Part number and band hanger, size from
3/4" (20mm) thru 2" (40mm).
Patent #5,344,108
Approx. Wt./100
Part No. lbs. (kg)
25 4.8 (2.2)
Pipe Clamps
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 99 B-Line series Pipe Hangers & Supports
Pipe Clamps
TOLCO™ Fig. 27B - Speed Nut
Size Range: — Fits screws supplied with all CPVC hangers.
Material: — Pre-Galvanized Steel
Finish: — Pre-Galvanized
Function: — To be used anywhere a screw cannot achieve full embedment due to
thickness of wood structural material when installed. Fig. 27B allows full pull out load
capacity of screws when installed to the standard screws supplied with all CPVC
hangers (Fig. 22, 23, 24, 28, 28M, 29, and B3184).
Approx. Wt./100
Part No. lbs. (kg)
Fig. 27B
(1) Required High Fig. 27B
Side of Hanger (2) Required
Application
Pipe Clamps
Fig. 27B
(2) Required
Fig. 27B
(1) Required High Side of
Hanger Application
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 100 Eaton
Pipe Clamps
TOLCO™ Fig. 28 - “Stand-Off” Hanger & Restrainer for CPVC Plastic Pipe
Size Range: — 3/4" (20mm) through 2" (50mm)
Material: — Steel, Pre-Galvanized
Function: — Designed to be used as a hanger and restrainer for CPVC piping where
the "stand-off" design will ease installation by eliminating the need for wood blocking.
Features:
• Flared edge design protects CPVC pipe from any rough or abrasive surfaces.
• Unique twist and lock design holds pipe firmly in place and allows retrofit type of installation. A
• The "Stand-Off" design eliminates the need for wood block extension.
• Can be installed on horizontal or vertical piping regardless of mounting surface orientation. B
C
• Attaches easily to wood structure with two hex head self-threading screws furnished with
product.
• Installs easily using rechargeable electrical driver with 5/16" (7.9mm) extension socket
eliminating impact tool damage to pipe.
• Attaches easily to steel, minimum 18 gauge (1.024mm) with (2) 1/4" x 1" tek type self drilling
tapping screws.
• UL Listed as a hanger and a restrainer for fire sprinkler piping.
Approvals: — Underwriters Laboratory Listed in the USA (UL) and Canada (cUL) to
support automatic fire sprinkler systems. May be installed into wood using fasteners
supplied with product, or into minimum 18 gauge steel using (2) 1/4" x 1" tek type
screws. Meets and exceeds the requirements of NFPA 13, 13R and 13D. Fig. 28 satisfies
the UL vertical restraint requirement where needed. UL Listed as a hanger and vertical
restraint when installed on 3/8" (9.5mm) composite wood material. Use two Fig. 27B Speed
Nuts when used as a hanger and restraint. Use one Fig. 27B Speed Nut on the upper
installed screw when used as a hanger only.
Order by: — Part number and pipe size.
Pat. # 7,455,268, Pat. # 7,832,248
Pipe Clamps
Fig. 27B
(1) Required High Fig. 27B
Side of Hanger (2) Required
Application
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 101 B-Line series Pipe Hangers & Supports
Pipe Clamps
TOLCO™ Fig. 28M - Offset Hanger & Restrainer for CPVC Plastic Pipe
Size Range: 3/4" (20mm) thru 2" (32mm)
Material: Steel, Pre-Galvanized
Function: Designed to be used as a hanger and restrainer for CPVC piping where the
“stand-off” design will ease installation by eliminating the need for wood blocking.
Features:
• Flared edge design protects CPVC pipe from any rough or abrasive surfaces
• Unique snap-on design holds pipe firmly in place and allows retrofit type of installation
• The “Stand-Off” design eliminates the need for wood block extension A
• Can be installed on horizontal or vertical piping regardless of mounting surface orientation
• Attaches easily to wood structure with two hex head self-threading screws furnished
with product
• Installs easily using rechargeable electrical driver with 5/16” (7.9mm) extension socket
eliminating impact tool damage to pipe
• Attaches easily to steel, minimum 18 gauge (1.024mm) with (2) 1/4” x 1” tek type self
drilling tapping screws C
• cULus Listed as a hanger and a restrainer for fire sprinkler piping
Installation Note: When installed in wood structural members and threads from the B
#10 x 1" screws are exposed, use Fig. 27B speed nut to secure
Approvals: Underwriters Laboratory Listed in the USA (UL) and Canada (cUL)
to support automatic fire sprinkler systems.
May be installed into wood using fasteners screws.
Meets and exceeds the requirements of NFPA 13,
13R and 13D. Fig. 28M satisfies the UL vertical
restraint requirements where needed. Fig. 27B
(2) Required
Order By: Part number and pipe size
Patent #7,744,042
Pipe Clamps
Fig. 27B
(1) Required
High Side of Hanger
Restraint
Restraint Detail A
Hanger Application
28M-3/4 3/4" (20) 2" (50.8) 3/16" (4.8) 35/16" (84.1) 5’-6” (1676) 9 (4.1)
28M-1 1" (25) 21/8" (54.0) 3/16" (4.8) 31/2" (88.9) 6’-0” (1829) 12 (5.4)
28M-11/4 11/4" (32) 25/16" (58.7) 3/16" (4.8) 31/2" (88.9) 6’-6” (1981) 13 (5.9)
28M-11/2 11/2" (49) 27/16" (61.9) 3/16" (4.8) 37/8" (98.4) 7’-0” (2133) 14 (6.3)
28M-2 2" (50) 25/8" (66.7) 3/16" (4.8) 47/16" (112.7) 8’-0” (2438) 15 (6.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 102 Eaton
Pipe Clamps
TOLCO™ Fig. 29 - Double Offset Hanger & Restrainer for CPVC Plastic Pipe
Size Range: Available in 3/4" (20mm) and 1" (25mm) pipe sizes 1.5”
(38.1mm)
Material: Pre-Galvanized Steel
Function: Intended to perform as a hanger and restrainer for CPVC, plastic fire sprinkler
pipe. Provides double offset 11/2” (20mm) x 11/2” (20mm) from mounting surface. This design
will ease installation by eliminating the need for wood block extension and allow retro-fit
attachment of hanger to sprinkler pipe. 1.5”
(38.1mm)
Features:
• Thumb tab provides protection to restrain pipe in rough job site conditions. Tab is not
required to be bent for listed installation.
• Offset edge eliminates abrasion.
• Attaches easily to wood structure with two special #10 x 1” hex head self-threading
screws furnished with product.
• Can be used as a single offset hanger by aligning "dimples" with top of mounting
surface and utilizing two fasteners in two of the three holes provided.
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) as a
hanger and restrainer to support fire sprinkler systems. Meets and exceeds requirements of
NFPA 13, 13R and 13D.
Finish: Pre-Galvanized
Order By: Part number and pipe size.
Patent Pending
1.5”
(38.1mm)
Pipe Clamps
Double Offset
Single Offset
Install using a rechargeable electric drill fitted with a 5/16” (7.9mm) socket attachment with the special hex head self-tapping
screws provided. Install screws until they bottom out. Pipe can be “snapped” into hanger before or after installation of
the screws to the mounting surface. “Thumb tab” may be bent up to provide additional protection to the pipe, but is not
required for performance of the hanger / restrainer function.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 103 B-Line series Pipe Hangers & Supports
Pipe Clamps
B3184 - Offset Hanger for CPVC Plastic Pipe and IPS Pipe
Size Range: 3/4" (20mm) thru 2" (32mm)
Material: Pre-Galvanized Steel
Function: Designed to be used as a hanger for CPVC piping or steel piping
where the “stand-off” design will ease installation by eliminating the need
for wood blocking. Pipe Size
Features:
• Flared edge design protects CPVC pipe from any rough or abrasive
surfaces
• The “Stand-Off” design eliminates the need for wood block extension
• Can be installed on horizontal or vertical piping regardless of mounting
surface orientation
• Attaches easily to wood structure with two hex head self-threading
screws furnished with product H
• cULus Listed as a hanger for fire sprinkler piping
Installation Note: When installed in wood structural members and threads
from the #10 x 1" screws are exposed, use Fig. 27B speed nut to secure L
Patent # 7,744,042
Pipe Clamps
CPVC H L Max. Hanger Fastener Hex Approx.
Pipe Size Overall Overall Spacing Head Size Wt./100
Part No. in. (mm) in. (mm) in. (mm) ft. (m) in. (mm) Lbs. (kg)
B3184-3/4 3/4" (20) 29/16" (65.1) 41/4" (107.9) 51/2 (1.67) 5/16" (7.9) 9.0 (4.1)
B3184-1 1" (25) 213/16" (71.4) 41/2" (114.3) 6 (1,83) 5/16" (7.9) 10.0 (4.5)
B3184-11/4 1
1 /4" (32) 33/16" (81.0) 45/8" (117.5) 1
6 /2 (1.98) 5/16" (7.9) 12.0 (5.4)
B3184-11/2 11/2" (40) 37/16" (87.3) 5" (127.0) 7 (2.13) 5/16" (7.9) 12.0 (5.4)
B3184-2 2" (50) 37/8" (98.4) 5" (127.0) 8 (2.44) 5/16" (7.9) 15.0 (6.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 104 Eaton
Pipe Clamps
KWIK-CLIP™ Series
Size Range:
1/2" (15mm) thru 2" (50mm) Copper Tubing or CPVC pipe sizes
3/8" (9.5mm) thru 21/8" (54mm) O.D. Tubing sizes
BPRC Series
Pipe Clamps
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 105 B-Line series Pipe Hangers & Supports
Pipe Clamps
KWIK-CLIP™ Series - cont.
Pipe Clamps
BPIC150 -- (--) 11/2” (38.1) -- (--) 3.8 (1.7)
BPIC162 11/2” (40) 15/8” (41.3) -- (--) 4.0 (1.8)
BPIC200 -- (--) 2” (50.8) -- (--) 4.2 (1.9)
BPIC212 2” (50) 21/8” (54.0) -- (--) 4.4 (2.0)
Insert in channel. Twist into place. Lay tubing/pipe into clip. Snap clip closed.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 106 Eaton
Pipe Rollers & Roller Supports
Pipe rollers and roller supports offered in this section are designed to compensate for longitudinal
movement due to the expansion or contraction of both insulated or non-insulated pipe.
Materials
Carbon Steel with Cast Iron rollers are used in the manufacture of pipe roller supports. Stainless Steel and other materials
are available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-
Galvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating,
DURA GREEN™ and other special coatings are available upon request.
Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be
uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be
supplied Electro-Plated, Copper plated, or in Stainless Steel.
Approvals (as noted)
Items in this section comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society
ANSI/MSS SP-69 SP-58.
Pipe Supports
Pipe Rollers &
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 107 B-Line series Pipe Hangers & Supports
Pipe Rollers & Roller Supports
B3110 - Adjustable Steel Yoke Pipe Roll
Size Range: 2" (65mm) thru 24" (600mm) pipe A
Material: Cast iron and steel (Rod Size) B
Hanger Rod Center of axle to
(Non-metallic polyurethane rollers are available)
E Not Included center of pipe.
Function: For supporting pipe where movement may occur due
to thermal expansion. C
Center of axle to
Approvals: Conforms to Federal Specification WW-H-171E & top of hanger steel.
A-A-1192A, Type 44, 1" (25mm) thru 20" (500mm), and Manufacturers
Standardization Society ANSI/MSS SP-69 & SP-58, Type 43. D
Rod Take-Out
Note: When pipe line is insulated, total outside diameter of pipe Center of pipe to
and covering should be used to determine size of hanger; also see bottom of hanger rod.
B3160 to B3165 on pages 157 thru 162. D
E
Finish: Plain. Contact customer service for alternative finishes and Adjustment
C
materials. B Top of pipe to bottom
Order By: Part number, pipe size and finish of hanger rod nut.
F
Pipe Supports
Pipe Rollers &
B3110-4 47/8" (123.8) 411/16" (119.1) 475 (2.11) 344 (156.0)
B3110-5 515/16" (150.8) 53/4" (146.0) 685 (3.04) 600 (272.1)
Notes: If using D.I. pipe refer
B3110-6 7" (177.8) 63/4" (171.4) 780 (3.47) 800 (362.9)
to page 307 for sizing.
B3110-8 9" (228.6) 83/4" (222.2) 780 (3.47) 1300 (589.7) Non-metallic rollers with
B3110-10 111/8" (282.6) 103/4" (273.0) 965 (4.29) 1600 (725.7) stainless steel yoke and
B3110-12 133/8" (339.7) 13" (330.2) 1200 (5.34) 2600 (1179.3) hardware are available for
most sizes (B3110NM-Pipe
B3110-14 141/2" (368.3) 141/4" (361.9) 1200 (5.34) 3400 (1542.2)
Size). Contact Eaton
B3110-16 163/8" (415.9) 161/8" (409.6) 1200 (5.34) 3900 (1769.0) Engineering for more
B3110-18 183/8" (466.7) 181/8" (460.4) 1400 (6.23) 4900 (2222.6) information.
B3110-20 203/8" (517.5) 201/8" (511.2) 1600 (7.11) 6686 (3032.7)
B3110-24 245/8" (625.5) 243/8" (619.1) 1800 (8.00) 11630 (5275.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 108 Eaton
Pipe Rollers & Roller Supports
D
Center of pipe to
B3114 - Pipe Roll with Sockets center of axle.
Size Range: 2" (25mm) thru 30" (750mm) pipe E
Material: Cast iron and steel axle Center of axle
(Non-metallic polyurethane rollers are available) to bottom
of socket.
Function: For supporting pipe where expansion may occur due to
thermal movement. Double rod design provides support for greater loads.
B
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A,
Type 42, 2" (50mm) thru 24" (600mm), and Manufacturers Standardization A
Society ANSI/MSS SP-69 & SP-58, Type 41 (Rod Size)
Note: When pipe line is insulated, total outside diameter of pipe and covering D Hanger Rod
should be used to determine size of hanger; also see B3160 to B3165 on and Nuts Not
pages 157 thru 162. C Included
E
Finish: Plain. Contact customer service for alternative finishes and materials.
Order By: Part number, pipe size and finish
Note: Not for continuous cycling applications.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 109 B-Line series Pipe Hangers & Supports
Pipe Rollers & Roller Supports
B3122 - Adjustable Roller Support
Size Range: 2" (25mm) thru 24" (750mm) pipe
Material: Cast iron and steel
(Non-metallic polyurethane rollers are available)
Function: Designed for suspending pipe where longitudinal movement and vertical D
adjustment is required.
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 42, B
2" (50mm) thru 24" (600mm), and Manufacturers Standardization Society ANSI/MSS SP-69 & E
SP-58, Type 41
Note: When pipe line is insulated, total outside diameter of pipe and covering should be
A
used to determine size of hanger; also see B3160 to B3165 on pages 157 thru 162.
(Rod Size)
F
Finish: Plain. Contact customer service for alternative finishes and materials.
Furnished With: B3114 Roller, two support rods and eight HN Hex Nuts — not assembled. C
B
Order By: Part number, pipe size and finish Length of rod
Note: Not for continuous cycling applications. C
Center to center
Pipe Size Rod Size B C D distance of rod.
Part No. in. (mm) A in. (mm) in. (mm) in. (mm) D
3/8"-16 Length of Roller
B3122-2 2" (50) 12" (304.8) 41/8" (104.8) 25/8" (66.7)
E
B3122-21/2 1
2 /2" (65) 1/2"-13 12" (304.8) 47/8" (123.8) 31/8" (79.4) Center of axle to
B3122-3 3" (80) 1/2"-13 12" (304.8) 51/2" (139.7) 33/4" (95.2) center of pipe.
B3122-31/2 31/2" (90) 1/2"-13 12" (304.8) 61/8" (155.6) 41/4" (107.9) F
B3122-4 4" (100) 5/8"-11 12" (304.8) 63/4" (171.4) 43/4" (120.6) Center of axle to
bottom of socket.
B3122-5 5" (125) 5/8"-11 12" (304.8) 81/16" (204.8) 513/16" (147.6)
B3122-6 6" (150) 3/4"-10 12" (304.8) 99/16" (242.9) 67/8" (174.6)
B3122-8 8" (200) 7/8"-9 12" (304.8) 1115/16" (303.2) 87/8" (225.4)
B3122-10 10" (250) 7/8"-9 12" (304.8) 141/16" (357.2) 11" (279.4)
B3122-12 12" (300) 7/8"-9 12" (304.8) 1513/16" (401.6) 13" (330.2)
B3122-14 14" (350) 1"-8 12" (304.8) 173/4" (450.8) 141/4" (361.9)
B3122-16 16" (400) 1"-8 18" (457.2) 193/4" (501.6) 161/4" (412.7)
B3122-18 18" (450) 1"-8 18" (457.2) 217/8" (555.6) 181/4" (463.5)
B3122-20 20" (500) 11/4"-7 18" (457.2) 241/4" (615.9) 201/4" (514.3)
B3122-24 24" (600) 11/2"-6 24" (609.6) 287/8" (733.4) 241/4" (615.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 110 Eaton
Pipe Rollers & Roller Supports
B3122A - Adjustable Double Roller Guide
Size Range: 2" (50mm) thru 24" (600mm) pipe D
Function: Designed for supporting and guiding pipe where longitudinal movement and
vertical adjustment are required.
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 42, 2" (50mm)
thru 24" (600mm), and Manufacturers Standardization Society ANSI/MSS SP-69 &
SP-58, Type 41
Note: When pipe line is insulated, total outside diameter of pipe and covering should be
used to determine size of hanger; also see B3160 to B3165 on pages 157 thru 162. E
Finish: Plain. Contact customer service for alternative finishes and materials.
Furnished With: B3114 Roller, two support rods and twelve HN Hex Nuts — not assembled. A
(Rod Size)
Order By: Part number, pipe size and finish F
C
Note: Not for continuous cycling applications.
B
Length of rod
C
Pipe Size Rod Size B C D
Center to center
Part No. in. (mm) A in. (mm) in. (mm) in. (mm)
distance of rod.
B3122A-2 2" (50) 3/8"-16 12" (304.8) 41/8" (104.8) 25/8" (66.7) D
B3122A-21/2 21/2" (65) 1/2"-13 14" (355.6) 47/8" (123.8) 31/8" (79.4) Length of Roller
B3122A-3 3" (80) 1/2"-13 14" (355.6) 51/2" (139.7) 33/4" (95.2) E
Center of axle to
B3122A-31/2 1
3 /2" (90) 1/2"-13 14" (355.6) 61/8" (155.6) 41/4" (107.9)
center of pipe.
B3122A-4 4" (100) 5/8"-11 18" (457.2) 63/4" (171.4) 43/4" (120.6)
F
B3122A-5 5" (125) 5/8"-11 18" (457.2) 81/16" (204.8) 513/16" (147.6) Center of axle to
B3122A-6 6" (150) 3/4"-10 24" (609.6) 99/16" (242.9) 67/8" (174.6) bottom of socket.
B3122A-8 8" (200) 7/8"-9 24" (609.6) 1115/16" (303.2) 87/8" (225.4)
B3122A-10 10" (250) 7/8"-9 30" (762.0) 141/16" (357.2) 11" (279.4)
B3122A-12 12" (300) 7/8"-9 30" (762.0) 1513/16" (401.6) 13" (330.2)
B3122A-14 14" (350) 1"-8 36" (914.4) 173/4" (450.8) 141/4" (361.9)
B3122A-16 16" (400) 1"-8 36" (914.4) 193/4" (501.6) 161/4" (412.7)
B3122A-18 18" (450) 1"-8 42" (1066.8) 217/8" (555.6) 181/4" (463.5)
B3122A-20 20" (500) 11/4"-7 42" (1066.8) 241/4" (615.9) 201/4" (514.3)
B3122A-24 24" (600) 11/2"-6 48" (1219.2) 287/8" (733.4) 241/4" (615.9)
B3122A-4 23/4" (69.8) 3/4" (19.0) 750 (3.33) 757 (343.4) and stainless steel
B3122A-5 33/8" (85.7) 3/4" (19.0) 750 (3.33) 872 (395.5) hardware are available for
most sizes (B3122ANM-Pipe
B3122A-6 315/16" (100.0) 11/8" (28.6) 1070 (4.76) 1687 (765.2) Size). Contact Eaton
B3122A-8 51/16" (128.6) 11/8" (28.6) 1350 (6.00) 2277 (1032.8) Engineering for more
B3122A-10 61/4" (158.7) 11/8" (28.6) 1730 (7.69) 2830 (1283.7) information.
B3122A-12 73/8" (187.3) 11/8" (28.6) 2400 (10.67) 3817 (1731.4)
B3122A-14 81/4" (209.5) 11/2" (38.1) 3130 (13.92) 6513 (2954.3)
B3122A-16 97/16" (242.9) 11/2" (38.1) 3970 (17.66) 6759 (3065.9)
B3122A-18 101/2" (266.7) 11/2" (38.1) 4200 (18.68) 7518 (3410.1)
B3122A-20 111/2" (292.1) 11/2" (38.1) 4550 (20.24) 11222 (5090.3)
B3122A-24 1313/16" (350.8) 2" (50.8) 6160 (27.40) 17666 (8013.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 111 B-Line series Pipe Hangers & Supports
Pipe Rollers & Roller Supports
B3120 - Roller Chair A
Center to center
Size Range: 2" (50mm) thru 24" (600mm) pipe of mounting holes
Material: Cast iron and steel B
(Non-metallic polyurethane rollers are available) Overall Bolt Length
B
Function: For supporting pipe where movement may occur due C
to thermal expansion. Used when ceiling suspension is impractical. Center of axle to bottom of
Approvals: Conforms to Federal Specification WW-H-171E & steel strap.
A-A-1192A, Type 45 and Manufacturers Standardization Society E
ANSI/MSS SP-69 & SP-58, Type 44. E Center of axle to
center of pipe.
Note: When pipe line is insulated, total outside diameter of
pipe and covering should be used to determine size of hanger; Steel Size
also see B3160 to B3165 on pages 157 thru 162. C
Finish: Plain. Contact customer service for alternative finishes and A
materials. D
Bolt Size
Order by: Part number, pipe size and finish
(Not Included)
Note: Not for continuous cycling applications.
Recommended
Bolt Size D
Pipe Size A B C (Not Included)
Part No. in. (mm) in. (mm) in. (mm) in. (mm)
B3120-2 2" (50) 11/4" (31.7) 45/8" (117.5) 11/2" (38.1) 3/8"-16 x 11/2"
B3120-21/2 21/2" (65) 11/4" (31.7) 53/8" (136.5) 15/8" (41.3) 3/8"-16 x 11/2"
B3120-3 3" (80) 2" (50.8) 6" (152.4) 13/4" (44.4) 3/8"-16 x 11/2"
Notes: If using D.I. pipe
B3120-31/2 31/2" (90) 2" (50.8) 63/4" (171.4) 21/16" (52.4) 3/8"-16 x 11/2"
refer to page 307 for sizing.
B3120-4 4" (100) 2" (50.8) 71/4" (184.1) 25/16" (58.7) 1/2"-13 x 11/2" Non-metallic rollers with
B3120-5 5" (125) 3" (76.2) 87/16" (214.3) 21/2" (63.5) 1/2"-13 x 11/2" stainless steel chair and
hardware are available for
B3120-6 6" (150) 1
3 /8" (79.4) 93/4" (247.6) 23/4" (69.8) 1/2"-13 x 11/2"
most sizes (B3120NM-Pipe
B3120-8 8" (200) 33/8" (85.7) 12" (304.8) 3" (76.2) 5/8"-11 x 11/2" Size). Contact Eaton
B3120-10 10" (250) 51/4" (133.3) 147/16" (366.7) 35/8" (92.1) 5/8"-11 x 2" Engineering for more
information.
B3120-12 12" (300) 51/2" (139.7) 165/8" (422.3) 41/8" (104.8) 5/8"-11 x 2"
B3120-14 14" (350) 6" (152.4) 181/4" (463.5) 45/8" (117.5) 5/8"-11 x 2"
B3120-16 16" (400) 8" (203.2) 21" (533.4) 5" (127.0) 5/8"-11 x 21/2"
B3120-20 20" (500) 10" (254.0) 25" (635.0) 53/4" (146.0) 3/4"-10 x 3"
B3120-24 24" (600) 12" (304.8) 30" (762.0) 7" (177.8) 3/4"-10 x 3"
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 112 Eaton
Pipe Rollers & Roller Supports
B3124 - Roller Support B
Overall Bolt Length C
Size Range: 2" (50mm) thru 20" (500mm) pipe
C
Material: Cast iron and steel Center of axle to
(Non-metallic polyurethane rollers are available) E
center of pipe. B
Function: Designed for supporting pipe where D
longitudinal movement and vertical adjustment are required. Overall Stud Height
Note: When pipe line is insulated, total outside diameter E
of pipe and covering should be used to determine size of Center of roller to
hanger; also see B3160 to B3165 on pages 157 thru 162. bottom of chair.
B3124-2 to 31/2 113/16" (46.0) 23/4" (69.8) 3/16" x 11/2" (4.8 x 38.1) 390 (1.73) 233 (105.7)
B3124-4 to 6 2" (50.8) 33/4" (95.2) 1/4" x 2" (6.3 x 50.8) 600 (2.67) 368 (166.9)
B3124-8 to 10 211/16" (68.3) 6" (152.4) 3/8" x 2" (9.5 x 50.8) 800 (3.56) 919 (416.8)
B3124-12 to 14 31/4" (82.5) 8" (203.2) 1/2" x 2" (12.7 x 50.8) 1300 (5.78) 1660 (753.0)
B3124-16 to 20 31/2" (88.9) 9" (228.6) 1/2" x 2" (12.7 x 50.8) 2300 (10.23) 2250 (1020.6)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 113 B-Line series Pipe Hangers & Supports
Pipe Rollers & Roller Supports
A
B3126 Roller Support Center of axle to bottom of plate.
Size Range: 2" (50mm) thru 20" (500mm) pipe B
Center of axle to bottom of plate.
Material: Steel with Cast Iron Roller
(Non-metallic polyurethane rollers are available) C
Center to center of mounting holes.
Function: Designed to mount on strut (metal framing) for
the support of pipe with longitudinal movement. D
Overall width.
Note: When pipe line is insulated, total outside diameter
of pipe and covering should be used to determine size of Steel Size
hanger; also see B3160 to B3165 on pages 157 thru 162.
E Hole Size
Finish: Plain. Contact customer service for alternative Diameter
finishes and materials.
Order By: Part number, pipe size and finish
C B
Pipe Size A B C D
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
2" (50) 17/16" (36.5) 6" (152.4) 311/64" (80.6) 75/8" (193.7)
21/2" (65) 17/16" (36.5) 6" (152.4) 327/64" (86.9) 75/8" (193.7)
B3126-2 to 31/2
3" (80) 17/16" (36.5) 6" (152.4) 347/64" (94.8) 75/8" (193.7)
31/2" (90) 17/16" (36.5) 6" (152.4) 363/64" (101.2) 75/8" (193.7)
4" (100) 17/16" (36.5) 7" (177.8) 413/64" (106.8) 85/8" (219.1)
B3126-4 to 6 5" (125) 17/16" (36.5) 7" (177.8) 447/64" (120.2) 85/8" (219.1)
6" (150) 17/16" (36.5) 7" (177.8) 517/64" (133.8) 85/8" (219.1)
8" (200) 113/16" (46.0) 83/4" (222.3) 7" (177.8) 103/8" (263.5)
B3126-8 to 10
10" (250) 113/16" (46.0) 83/4" (222.3) 81/16" (204.8) 103/8" (263.5)
12" (300) 27/16" (61.9) 121/8" (308.0) 927/32" (250.1) 143/8" (365.1)
B3126-12 to 14
14" (350) 27/16" (61.9) 121/8" (308.0) 1015/32" (265.9) 143/8" (365.1)
16" (400) 25/8" (66.7) 131/8" (333.4) 117/8" (301.6) 153/8" (390.5)
B3126-16 to 20 18" (450) 25/8" (66.7) 131/8" (333.4) 127/8" (327.1) 153/8" (390.5)
Pipe Supports
Pipe Rollers &
20" (500) 25/8" (66.7) 131/8" (333.4) 137/8" (352.4) 153/8" (390.5)
B3126-2 to 31/2 9/16" (14.3) 1/4" x 15/8" (6.3 x 41.3) 390 (1.73) 177 (80.3)
B3126-4 to 6 9/16" (14.3) 1/4" x 15/8" (6.3 x 41.3) 600 (2.67) 231 (104.8)
B3126-8 to 10 9/16" (14.3) 1/4" x 15/8" (6.3 x 41.3) 800 (3.56) 542 (245.8)
B3126-12 to 14 13/16" (20.6) 3/8" x 2" (9.5 x 50.8) 1300 (5.78) 1040 (471.7)
B3126-16 to 20 13/16" (20.6) 3/8" x 2" (9.5 x 50.8) 2300 (10.23) 1508 (684.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 114 Eaton
Pipe Rollers & Roller Supports
B218 Pipe Rollers-1/2" (15mm) to 8" (200mm) Pipe
Size Range: 1/2" (15mm) thru 8" (200mm) pipe
Material: Steel with Malleable Iron Roller Channel and mounting
Function: Designed to mount on strut (metal framing) for hardware not included.
the support of pipe with longitudinal movement.
Note: When pipe line is insulated, total outside diameter
of pipe and covering should be used to determine size of
hanger; also see B3160 to B3165 on pages 157 thru 162.
Finish: Electro-Galvanized
B
Order By: Part number, pipe size and finish 25/8”
(66.7)
Design Load: 500 Lbs. (2.22kN)
A
Weight: Approx. weight per 100 - 256.0 Lbs. (116.1kg))
23/8”
Notes: If using D.I. pipe refer to page 307 for sizing. (60.3)
Not for continuous cycling applications.
11/2" (40) 31/4" (82.5) 43/8" (111.1) 47/8" (123.8) 55/16" (134.9) 53/4" (146.0) -- -- -- --
2" (50) 39/16" (90.5) 411/16" (119.1) 51/16" (128.6) 55/8" (142.9) 61/16" (154.0) -- -- -- --
21/2" (65) 313/16" (96.8) 47/8" (123.8) 55/16" (134.9) 6" (152.4) 63/8" (161.9) -- -- -- --
3" (80) 41/8" (104.8) 51/16" (128.6) 59/16" (141.3) 61/8" (155.6) 67/16" (163.5) 7" (177.8) -- --
31/2" (90) 43/8" (111.1) 55/16" (134.9) 513/16" (147.6) 61/4" (158.7) 611/16" (169.9) 71/4" (184.1) -- --
4" (100) 45/8" (117.5) 59/16" (141.3) 61/16" (154.0) 67/16" (163.5) 615/16" (176.2) 73/8" (187.3) -- --
5" (125) 51/2" (127.0) 61/16" (154.0) 67/16" (163.5) 7" (177.8) 73/8" (187.3) 77/8" (200.0) 813/16" (223.8)
6" (150) 51/2" (139.7) 67/16" (163.5) 615/16" (176.2) 73/8" (187.3) 715/16" (201.6) 81/2" (215.9) 91/2" (241.3)
8" (200) 615/16" (160.3) 73/8" (187.3) 715/16" (201.6) 87/16" (214.3) 815/16" (227.0) -- -- -- --
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 115 B-Line series Pipe Hangers & Supports
Pipe Rollers & Roller Supports
B219 Pipe Rollers 3/4" (15mm) to 12" (300mm) Pipe
Size Range: 1/2" (20mm) thru 12" (300mm) pipe Channel and mounting
hardware not included.
Material: Steel with Malleable Iron Roller
Function: Designed to mount on strut (metal framing) for
the support of pipe with longitudinal movement.
Note: When pipe line is insulated, total outside diameter
of pipe and covering should be used to determine size of B
hanger; also see B3160 to B3165 on pages 157 thru 162. 25/8”
(66.7)
Finish: Electro-Galvanized
Order By: Part number, pipe size and finish A
Design Load: 750 Lbs. (3.33kN) 23/8”
(60.3)
Notes: If using D.I. pipe refer to page 307 for sizing.
Not for continuous cycling applications.
B219 Sizing Chart
Insulation Thickness in. (mm)
Pipe Size 0” (0.0) 1” (25.4) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 3” (76.2) 4” (101.6)
1/2" (15) B219 -- -- -- -- -- --
3/4" (20) B219 B219 B219 B219-1 -- -- --
1" (25) B219 B219 B219-1 B219-1 -- -- --
11/4" (32) B219 B219 B219-1 B219-1 -- -- --
11/2" (40) B219 B219 B219-1 B219-2 B219-2 -- --
Reference Chart - A Dimension 2" (50) B219 B219-1 B219-1 B219-2 B219-2 -- --
A Wt./100 21/2" (65) B219 B219-1 B219-2 B219-2 B219-3 -- --
Part No. in. (mm) Lbs. (kg) 3" (80) B219 B219-1 B219-2 B219-2 B219-3 B219-3 --
B219 71/4" (184.1) 253 (114.7) 31/2" (90) B219-1 B219-2 B219-2 B219-3 B219-3 B219-4 --
4" (100) B219-1 B219-2 B219-2 B219-3 B219-3 B219-4 --
B219-1 8" (203.2) 258 (117.0)
5" (125) B219-1 B219-2 B219-3 B219-3 B219-4 B219-4 B219-5
B219-2 9" (228.6) 263 (119.3)
6" (150) B219-2 B219-3 B219-3 B219-4 B219-4 B219-5 B219-5
B219-3 10" (254.0) 269 (122.0) 8" (200) B219-3 B219-4 B219-4 B219-5 B219-5 -- --
B219-4 107/8" (276.2) 274 (124.8) 10" (250) B219-4 B219-5 -- -- -- -- --
B219-5 115/8" (295.3) 279 (126.5) 12" (300) B219-5 -- -- -- -- -- --
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 116 Eaton
Pipe Rollers & Roller Supports
B379 Pipe Roller - 6" (150mm) to 18" (450mm) Pipe
Size Range: 6" (150mm) thru 18" (450mm) pipe
Material: Steel with Malleable Iron Roller
Function: Designed to mount on strut (metal framing) for
the support of pipe with longitudinal movement.
Note: When pipe line is insulated, total outside diameter
of pipe and covering should be used to determine size of
hanger; also see B3160 to B3165 on pages 157 thru 162.
Finish: Electro-Galvanized
Order By: Part number, pipe size and finish Channel and mounting
hardware not included.
Design Load: 1500 Lbs. (6.67kN)
Weight: Approx. weight per 100 - 558.0 Lbs. (253.1kg))
Notes: If using D.I. pipe refer to page 307 for sizing.
Not for continuous cycling applications.
4” B
(101.6)
Pipe Size 0” (0.0mm) 1” (25.4mm) 11/2” (38.1mm) 2” (50.8mm) 21/2” (63.5mm) 3” (76.2mm) 4” (101.6mm)
6" (150) 67/8" (174.6) 77/8" (200.0) 83/8" (212.7) 87/8" (225.4) 93/8" (238.1) 97/8" (250.8) 1015/16" (277.8)
8" (200) 713/16" (198.4) 87/8" (225.4) 93/8" (238.1) 97/8" (250.8) 107/16" (265.1) 1015/16"(277.8) 117/8" (301.6)
10" (250) 813/16" (223.8) 97/8" (250.8) 107/16" (265.1) 1015/16" (277.8) 113/8" (288.9) 117/8" (301.6) 1213/16" (325.4)
12" (300) 93/4" (247.6) 1015/16" (277.8) 113/8" (288.9) 117/8" (301.6) 125/16" (312.7) 1213/16"(325.4) 133/4" (349.2)
14" (350) 105/16" (261.9) 113/8" (288.9) 117/8" (301.6) 125/16" (312.7) 1213/16" (325.4) 131/4" (336.5) 141/4" (361.9)
16" (400) 115/16" (287.3) 125/16" (312.7) 1213/16" (325.4) 131/4" (336.5) 133/4" (349.2) 141/4" (361.9) 151/8" (384.2)
18" (450) 121/4" (311.1) 131/4" (336.5) 133/4" (349.2) 143/16" (360.4) 1411/16" (373.1) 151/8" (384.2) 161/16" (408.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 117 B-Line series Pipe Hangers & Supports
Pipe Rollers & Roller Supports
B479 Pipe Roller - 16" (400mm) to 30" (750mm) Pipe
Size Range: 16" (400mm) thru 30" (750mm) pipe
Material: Steel with Malleable Iron Roller
Function: Designed to mount on strut (metal framing) for
the support of pipe with longitudinal movement.
Note: When pipe line is insulated, total outside diameter
of pipe and covering should be used to determine size of
hanger; also see B3160 to B3165 on pages 157 thru 162.
Finish: Electro-Galvanized
Order By: Part number, pipe size and finish
Design Load: 2000 Lbs. (8.89kN) Channel and mounting
hardware not included.
Weight: Approx. weight per 100 - 889.0 Lbs. (403.2kg)
Notes: If using D.I. pipe refer to page 307 for sizing.
Not for continuous cycling applications.
B
4”
(101.6)
A
213/16”
(71.4)
Insulation Thickness
Pipe Size 0” (0.0mm) 1” (25.4mm) 11/2” (38.1mm) 2” (50.8mm) 21/2” (63.5mm) 3” (76.2mm) 4” (101.6mm)
16" (400) 1013/16" (274.6) 1115/16" (303.2) 123/8" (314.3) 1215/16" (328.6) 133/8" (339.7) 1315/16"(354.0) 1415/16" (379.4)
18" (450) 117/8" (301.6) 1215/16" (328.6) 137/16" (341.3) 1315/16" (354.0) 147/16" (366.7) 1415/16"(379.4) 1515/16" (404.8)
20" (500) 123/16" (325.4) 1315/16" (354.0) 147/16" (366.7) 147/8" (377.8) 157/16" (392.1) 157/8" (403.2) 1615/16" (430.2)
24" (600) 1413/16" (376.2) 157/8" (403.2) 163/8" (415.9) 167/8" (428.6) 173/8" (441.3) 177/8" (454.0) 187/8" (479.4)
30" (750) 1713/16" (452.4) 187/8" (476.2) 193/8" (492.1) 197/8" (504.8) 203/8" (517.5) 205/16" (531.8) 2115/16" (557.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 118 Eaton
Pipe Rollers & Roller Supports
B3117SL Steel Roller Stand
A
Size Range: 2” (50mm) thru 42” (1067mm) Center of axle to
bottom of plate.
Material: Cast Iron Roller and Steel Base
E
(Non-metallic polyurethane rollers are available) Center of pipe to
Function: Designed to support pipe where movement may bottom of base plate.
occur due to thermal expansion. When used with insulated
pipe, see B3160-B3165 pipe covering protection saddle charts G Dia.
for proper sizing on pages 157 thru 162. 2 Holes
Approvals: Conforms to Federal Specification WW-H-171E & F Dia. E
A-A-1192A, Type 45 and Manufacturers Standardization Society 4 Holes
ANSI/MSS SP-69 & SP-58, Type 44. A
Standard Finish: Plain, Available in Electro-Galvanized and J
HDG finish or Stainless Steel material H
Pipe Size A B C D E
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
2" (50) 13/4" (44.4) 83/8" (212.7) 6" (152.4) 4" (101.6) 311/16" (93.7)
21/2" (65) 13/4" (44.4) 83/8" (212.7) 6" (152.4) 4" (101.6) 315/16" (100.0)
B3117SL-2 to 31/2
3" (80) 13/4" (44.4) 83/8" (212.7) 6" (152.4) 4" (101.6) 41/4" (107.9)
31/2" (90) 13/4" (44.4) 83/8" (212.7) 6" (152.4) 4" (101.6) 41/2" (114.3)
4" (100) 21/16" (52.4) 97/8" (250.8) 6" (152.4) 41/4" (107.9) 5" (127.0)
B3117SL-4 to 6 5" (125) 21/16" (52.4) 97/8" (250.8) 6" (152.4) 41/4" (107.9) 59/16" (141.3)
6" (150) 21/16" (52.4) 97/8" (250.8) 6" (152.4) 41/4" (107.9) 61/16" (154.0)
8" (200) 37/16" (87.3) 85/8" (219.1) 8" (203.2) 5" (127.0) 813/16" (223.8)
B3117SL-8 to 10
10" (250) 37/16" (87.3) 85/8" (219.1) 8" (203.2) 5" (127.0) 97/8" (250.8)
12" (300) 37/8" (98.4) 1015/16" (277.8) 8" (203.2) 6" (152.4) 117/16" (290.5)
B3117SL-12 to 14
14" (350) 37/8" (98.4) 1015/16" (277.8) 8" (203.2) 6" (152.4) 121/16" (306.4)
16" (400) 41/4" (107.9) 123/8" (314.3) 10" (254.0) 61/2" (165.1) 135/8" (346.1)
B3117SL-16 to 20 18" (450) 41/4" (107.9) 123/8" (314.3) 10" (254.0) 61/2" (165.1) 1411/16" (373.1)
20" (500) 41/4" (107.9) 123/8" (314.3) 10" (254.0) 61/2" (165.1) 1511/16" (398.5)
B3117SL-24 24" (600) 43/8" (111.1) 131/2" (342.9) 103/4" (273.0) 61/2" (165.1) 1711/16" (449.3)
B3117SL-30 30" (750) 51/8" (130.2) 17" (431.8) 103/4" (273.0) 8" (203.2) 213/4" (552.4)
36" (900) 53/4" (146.0) 20" (508.0) 12" (304.8) 9" (203.2) 255/16" (642.9)
B3117SL-36 to 42
42" (1050) 53/4" (146.0) 20" (508.0) 12" (304.8) 9" (203.2) 285/16" (719.1)
Pipe Supports
Pipe Rollers &
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 119 B-Line series Pipe Hangers & Supports
Pipe Rollers & Roller Supports
B3118SL Adjustable Roller Stand with Base Plate
Size Range: 2” (50mm) thru 30” (750mm) C
Material: Cast Iron Roller and Steel Base Center of pipe to bottom
(Non-metallic polyurethane rollers are available) of base plate.
Function: Designed to support pipe where movement may D
occur due to thermal expansion. Set screws allow for vertical Center to center of
adjustment. When used with insulated pipe, see B3160-B3165 mounting holes in
pipe covering protection saddle charts for proper sizing on bottom plate.
pages 157 thru 162. E Dia. F C
Approvals: Conforms to Federal Specification WW-H-171E & Mounting holes in
bottom plate.
A-A-1192A, Type 47 and Manufacturers Standardization
Society ANSI/MSS SP-69 & SP-58, Type 46.
Finish: Plain, Available in Electro-Galvanized and D
A
HDG finish or Stainless Steel material
B
Order by: Part number and finish.
E
Notes: If using D.I. pipe refer to page 307 for sizing.
Non-metallic rollers with stainless steel bases are available
for most sizes (B3118SLNM-Pipe Size). Contact Eaton
Engineering for more information.
Not for continuous cycling applications. 2 to 31/2 Roller
Stand shown
2" (50) 67/8" (174.6) 6" (152.4) 43/4" (120.6) 55/8" (142.9) 37/8" (98.4)
21/2" (65) 67/8" (174.6) 6" (152.4) 5" (127.0) 57/8" (142.9) 37/8" (98.4)
B3118SL-2 to 31/2
3" (80) 67/8" (174.6) 6" (152.4) 55/16" (134.9) 63/16" (157.2) 37/8" (98.4)
31/2" (90) 67/8" (174.6) 6" (152.4) 59/16" (141.3) 67/16" (163.5) 37/8" (98.4)
4" (100) 81/8" (206.4) 6" (152.4) 63/16" (157.2) 77/16" (188.9) 51/8" (130.2)
B3118SL-4 to 6 5" (125) 81/8" (206.4) 6" (152.4) 63/4" (171.4) 8" (203.2) 51/8" (130.2)
6" (150) 81/8" (206.4) 6" (152.4) 71/4" (184.1) 81/2" (215.9) 51/8" (130.2)
8" (200) 105/8" (269.9) 8" (203.2) 101/8" (257.2) 1111/16" (296.9) 73/8" (187.3)
B3118SL-8 to 10
10" (250) 105/8" (269.9) 8" (203.2) 113/16" (284.2) 123/4" (323.8) 73/8" (187.3)
12" (300) 13" (330.2) 8" (203.2) 123/4" (323.8) 141/8" (358.8) 91/2" (241.3)
B3118SL-12 to 14
14" (350) 13" (330.2) 8" (203.2) 133/8" (339.7) 143/8" (365.1) 91/2" (241.3)
16" (400) 145/8" (371.5) 10" (254.0) 153/8" (390.5) 171/4" (438.1) 111/8" (282.6)
B3118SL-16 to 20 18" (450) 145/8" (371.5) 10" (254.0) 163/8" (415.9) 181/4" (463.5) 111/8" (282.6)
20" (500) 145/8" (371.5) 10" (254.0) 173/8" (441.3) 191/4" (488.9) 111/8" (282.6)
B3118SL-24 24" (600) 153/4" (400.0) 10" (254.0) 191/4" (488.9) 211/4" (539.7) 121/4" (311.1)
B3118SL-30 30" (750) 191/4" (488.9) 101/2" (266.7) 247/16" (620.7) 2611/16" (677.9) 153/4" (400.0)
Pipe Supports
Pipe Rollers &
E F Design Load Approx. Wt./100
Part No. in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3118SL-2 to 31/2 1" (25.4) 1" (25.4) 390 (1.73) 1100 (498.9)
B3118SL-4 to 6 1" (25.4) 1" (25.4) 950 (4.22) 1310 (594.2)
B3118SL-8 to 10 1" (25.4) 11/8" (28.6) 2100 (9.34) 2725 (1236.0)
B3118SL-12 to 14 1" (25.4) 11/8" (28.6) 3075 (13.68) 3612 (1638.4)
B3118SL-16 to 20 1" (25.4) 11/4" (31.7) 4980 (22.15) 6384 (2895.8)
B3118SL-24 1" (25.4) 13/8" (34.9) 6100 (27.13) 8437 (3827.0)
B3118SL-30 1" (25.4) 13/8" (34.9) 7500 (33.36) 12528 (5682.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 120 Eaton
Pipe Rollers & Roller Supports
B3119SL Roller with Steel Base Plate B
Size Range: — 2" (50mm) thru 30" (750mm) pipe Center of pipe
to bottom of plate.
Material: — Steel with Cast Iron Roller
(Non-metallic polyurethane rollers are available) D C
Center of pipe to center
Function: — Designed for the support of pipe with longitudinal of roller.
movement.
D
Note: — When pipe line is insulated, total outside diameter E Length of Roller
of pipe and covering should be used to determine size of
hanger; also see B3160 to B3165 on pages 157 thru 162. E
Approvals: Conforms to Federal Specification WW-H-171E & Center to center of
mounting holes in
A-A-1192A, Type 46 and Manufacturers Standardization Society C bottom plate.
ANSI/MSS SP-69 & SP-58, Type 45.
F
Finish: — Plain. Contact customer service for alternative finishes B A Roller Travel
and materials.
G G Dia.
Order By: Part number, pipe size and finish 1 hole for sizes 2 thru 6
2 holes for sizes 8 thru 30
Notes: If using D.I. pipe refer to page 307 for sizing. Non-metallic rollers
with stainless steel bases are available for most sizes (B3119SLNM-Pipe
Size). Contact Eaton Engineering for more information.
Not for continuous cycling applications.
Structural
Pipe Size Channel A B C D
Part No. in. (mm) Size in. (mm) in. (mm) in. (mm) in. (mm)
2" (50) 43/4" (120.6) 31/16" (77.8) 115/16" (49.2) 23/4" (69.8)
21/2" (65) 43/4" (120.6) 35/16" (84.1) 23/16" (55.6) 23/4" (69.8)
B3119SL-2 to 31/2 C4 x 5.4
3" (80) 43/4" (120.6) 35/8" (92.1) 21/2" (63.5) 23/4" (69.8)
31/2" (90) 43/4" (120.6) 37/8" (98.4) 23/4" (69.8) 23/4" (69.8)
4" (100) 53/4" (146.0) 41/8" (104.8) 215/16" (74.6) 33/4" (95.2)
B3119SL-4 to 6 5" (125) C5 x 6.7 53/4" (146.0) 411/16" (119.1) 31/2" (88.9) 33/4" (95.2)
6" (150) 53/4" (146.0) 53/16" (131.8) 4" (101.6) 33/4" (95.2)
8" (200) 8" (203.2) 73/16" (182.6) 53/8" (136.5) 6" (152.4)
B3119SL-8 to 10 C6 x 8.2
10" (250) 8" (203.2) 81/4" (209.5) 67/16" (163.5) 6" (152.4)
12" (300) 10" (254.0) 913/16" (249.2) 79/16" (192.1) 8" (203.2)
B3119SL-12 to 14 C8 x 11.5
14" (350) 10" (254.0) 107/16" (265.1) 83/16" (208.0) 8" (203.2)
16" (400) 11" (279.4) 117/8" (301.6) 93/8" (238.1) 9" (228.6)
B3119SL-16 to 20 18" (450) C8 x 11.5 11" (279.4) 1215/16" (328.6) 107/16" (265.1) 9" (228.6)
20" (500) 11" (279.4) 1315/16" (354.0) 117/16" (290.5) 9" (228.6)
B3119SL-24 24" (600) C8 x 11.5 12" (304.8) 1513/16" (401.6) 135/16" (338.1) 10" (254.0)
B3119SL-30 30" (750) C10 x 15.3 141/2" (368.3) 195/8" (498.5) 165/8" (422.3) 121/2" (317.5)
Pipe Supports
Pipe Rollers &
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 121 B-Line series Pipe Hangers & Supports
Pipe Rollers & Roller Supports
B3264 - Spring Cushion Hanger
A
Size Range: 2" (50mm) thru 30" (750mm) pipe (Rod Size)
Hanger Rod Not
Material: Steel Included
Function: Designed for use with B3114 as a cushion spring for
a piping system where vertical movement does not exceed
11/4" (31.7mm).
Approvals: Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 50 and Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58, Type 49.
C
Order By: Part number D
Includes:
2 Springs
4 Cup Washers
Maximum Load at
Rod Size Free Height Spring Deflection 1" (25.4mm) Approx.
A C D Per Spring Deflection - 2 Springs Wt./100 Pair
Part No. in. (mm) in. (mm) Lbs./In. (kg/mm) Lbs. (kN) Lbs. (kg)
B3264-1 3/8"-16 3" (76.2) 111/16" (42.8) 30 (0.5) 78 (.34) 100 (45.3)
B3264-5 3/4"-10 45/8" (117.5) 25/16" (58.7) 707 (12.6) 1500 (6.67) 400 (181.4)
B3264-6 1"-8 47/8" (123.8) 31/4" (82.5) 1600 (28.6) 3200 (14.23) 700 (317.5)
Pipe Supports
Pipe Rollers &
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 122 Eaton
Pipe Rollers & Roller Supports
B3114R Long Pattern Pipe Roller Only
C
Size Range: 2" (50mm) thru 30" (750mm) pipe C
Center of axle
Material: Cast Iron to center of pipe.
B
(Non-metallic polyurethane rollers are available) D
Function: Designed for supporting pipe runs with longitudinal Axle Dia
movement. Use with steel axle rod.
A
Finish: Plain
L
Order By: Part number and finish.
Notes: If using D.I. pipe refer to page 307 for sizing.
Non-metallic roller with stainless steel axle sleeve are available
for most sizes (BFP3114R-Pipe Size). Contact Eaton Engineering
for more information.
B3114R-2 2" (50) 11/16" (27.0) 3/4" (19.0) 19/16" (39.7) 3/8" (9.5) 25/8" (66.7) 29 (13.1)
B3114R-21/2 21/2" (65) 11/4" (31.7) 7/8" (22.2) 17/8" (47.6) 1/2" (12.7) 31/8" (79.4) 47 (21.3)
B3114R-3 3" (80) 13/8" (34.9) 7/8" (22.2) 23/16" (55.6) 1/2" (12.7) 33/4" (95.2) 62 (28.1)
B3114R-31/2 31/2" (90) 11/2" (38.1) 1" (25.4) 21/2" (63.5) 1/2" (12.7) 41/4" (107.9) 71 (32.2)
B3114R-4 4" (100) 119/32" (40.5) 1" (25.4) 23/4" (69.8) 1/2" (12.7) 43/4" (120.6) 96 (43.5)
B3114R-5 5" (125) 17/8" (47.6) 11/8" (28.6) 33/8" (85.7) 5/8" (15.9) 513/16" (147.6) 131 (59.4)
B3114R-6 6" (150) 21/8" (54.0) 11/4" (31.7) 315/16" (100.0) 3/4" (19.0) 67/8" (174.6) 207 (93.9)
B3114R-8 8" (200) 25/8" (66.7) 11/2" (38.1) 51/16" (128.6) 7/8" (22.2) 87/8" (225.4) 323 (146.5)
B3114R-10 10" (250) 33/16" (81.0) 13/4" (44.4) 61/4" (158.7) 7/8" (22.2) 11" (279.4) 482 (218.6)
B3114R-12 12" (300) 33/4" (95.2) 2" (50.8) 73/8" (187.3) 1" (25.4) 13" (330.2) 854 (387.4)
B3114R-14 14" (350) 43/8" (111.1) 21/2" (63.5) 81/4" (209.5) 11/8" (28.6) 141/4" (361.9) 1150 (521.6)
B3114R-16 16" (400) 45/8" (117.5) 21/2" (63.5) 91/4" (234.9) 11/4" (31.7) 161/4" (412.7) 1200 (544.3)
B3114R-18 18" (450) 51/8" (130.2) 23/4" (69.8) 103/8" (263.5) 11/4" (31.7) 181/4" (463.5) 1550 (703.1)
B3114R-20 20" (500) 55/8" (142.9) 3" (76.2) 111/2" (292.1) 13/8" (34.9) 201/4" (514.3) 2080 (943.5)
B3114R-24 24" (600) 63/4" (171.4) 35/8" (92.1) 1313/16" (350.8) 11/2" (38.1) 241/4" (615.9) 3300 (1496.9)
B3114R-30 30" (750) 81/2" (215.9) 41/2" (114.3) 171/4" (438.1) 13/4" (44.4) 301/4" (768.3) 6200 (2812.3)
Pipe Supports
Pipe Rollers &
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 123 B-Line series Pipe Hangers & Supports
Pipe Rollers & Roller Supports
B3117R - Short Pattern Pipe Roller Only
Size Range: 2" (50mm) thru 42" (1050mm) pipe
Material: Cast Iron
(Non-metallic polyurethane rollers are available)
Function: Designed for supporting pipe runs with longitudinal D
movement. Use with steel axle rod.
Finish: Plain A
Axle Dia
Order By: Part number and finish.
Notes: If using D.I. pipe refer to page 307 for sizing. L
Non-metallic roller with stainless steel axle sleeve are available
for most sizes (BFP3117R-Pipe Size). Contact Eaton Engineering
for more information.
B3117R-2 to 31/2 2" to 31/2" (50 to 90) 1/2" (12.7) 17/8" (47.6) 23/4" (69.8) 70 (31.7)
B3117R-4 to 6 4" to 6" (100 to 150) 1/2" (12.7) 21/16" (52.4) 33/4" (95.2) 114 (51.7)
B3117R-8 to 10 8", 10" (200 to 250) 3/4" (19.0) 31/4" (82.5) 6" (152.4) 329 (149.2)
B3117R-12 to 14 12", 14" (300 to 350) 7/8" (22.2) 4" (101.6) 8" (203.2) 600 (272.1)
B3117R-16 to 20 16" to 20" (400 to 500) 11/8" (28.6) 41/2" (114.3) 9" (228.6) 781 (354.2)
B3117R-24 24" (600) 11/4" (31.7) 47/16" (112.7) 10" (254.0) 842 (381.9)
B3117R-30 30" (750) 13/4" (44.4) 51/2" (139.7) 121/2" (317.5) 1385 (628.2)
B3117R-36 to 42 36" to 42" (900 to 1050) 2" (50.8) 6" (152.4) 147/8" (377.8) 1585 (718.9)
Pipe Supports
Pipe Rollers &
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 124 Eaton
Pipe Supports, Guides, Shields & Saddles
Shields & Saddles
Supports, Guides,
Pipe supports offered in this section are designed to support pipe from a base structure where vertical
adjustment may be required. Pipe guides and slides are designed to allow longitudinal movement due to thermal expansion
and contraction of pipe. Protection shields and saddles are designed to prevent damage to pipe insulation.
Materials
Carbon Steel is used in the manufacturing of pipe supports, guides, shields and saddles. Stainless Steel and other materials
are available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-Plated
Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, DURA GREEN™ and other special
coatings are available upon request.
Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly
coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be supplied
Electro-Plated, Copper plated, or in Stainless Steel.
Approvals (as noted)
Items in this section comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58.
All pipe supports in this section are sized to fit schedule 40/80 pipe unless otherwise noted. Some steel items may be specially
fabricated to fit other pipe diameters i.e. ductile iron, cast iron, etc. See pipe data charts on pages 305 thru 311 for proper size
selection.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 125 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
Applications
B338 0 CT - 3
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 126 Eaton
Pipe Supports, Guides, Shields & Saddles
B3088 - Base Stand **Height from top
of pipe to bottom of Stand Pipe Size
Size Range: 3/4" (20mm) thru 6" (150mm) pipe plate.
Material: Steel **Specify H
Height 4 Holes
Function: Designed as an unthreaded base stand for
Shields & Saddles
Supports, Guides,
Note: Match B3088 part number with dimension 'D' from B3090, B3094, B3095, B3096, B3097 or B3098 charts.
Note: Match B3088T part number with dimension 'D' from B3089, B3092, and B3093 charts.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 127 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3088S - Seismic Base Stand **Height from
top of pipe to Stand Pipe Size
Size Range: 3/4" (20mm) thru 4" (100mm) pipe bottom of plate.
Note: Match B3088 part number with dimension 'D' from B3090, B3094, B3095, B3096, B3097 or B3098 charts.
**Height from
B3088ST - Threaded Seismic Base Stand top of pipe to
TL
Thread Length
bottom of plate.
Size Range: 1" (25mm) thru 4" (100mm) pipe
Material: Steel Stand Pipe Size
**Specify
Function: Designed as a threaded base stand where vertical Height H
4 Holes
adjustment is required for pipe supports B3089, B3092, and
B3093, to meet requirements of 12X anchor diameter hole A
spacing for seismic applications. The standard B3088T-3 &
B3088T-6 already meet this requirement. A
Finish: Plain or Electro-Galvanized. Contact customer service
for alternative finishes and materials. Plate Size
Order By: Part number, height and finish.
Note: Match B3088T part number with dimension 'D' from B3089, B3092, and B3093 charts.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 128 Eaton
Pipe Supports, Guides, Shields & Saddles
B3096 - Adjustable Pipe Saddle Support
Size Range: Size 2" (505mm) thru 12" (300mm) pipe
Material: Steel Steel Size
Pipe Size Max. Pipe O.D. Thread D Steel Size Approx. Wt./100
Part No. in. (mm) in. (mm) Size A in. (mm) in. (mm) Lbs. (kg)
B3096-2 2" (50) 23/8" (60.3) 7/8"-9 1" (25) 3/8" x 2" (9.5 x 50.8) 212 (96.1)
B3096-3 3" (80) 31/2" (88.9) 7/8"-9 1" (25) 3/8" x 2" (9.5 x 50.8) 259 (117.5)
B3096-4 4" (100) 41/2" (114.3) 1"-8 1" (25) 3/8" x 3" (9.5 x 76.2) 370 (167.8)
B3096-5 5" (125) 59/16" (141.3) 1"-8 1" (25) 3/8" x 3" (9.5 x 76.2) 404 (183.2)
B3096-6 6" (150) 65/8" (168.3) 11/4"-7 11/4" (32) 1/2" x 31/2" (12.7 x 88.9) 714 (323.9)
B3096-8 8" (200) 85/8" (219.1) 11/4"-7 11/4" (32) 1/2" x 31/2" (12.7 x 88.9) 819 (371.5)
B3096-10 10" (250) 103/4" (273.0) 11/2"-6 11/2" (40) 1/2" x 4" (12.7 x 101.6) 1194 (541.6)
B3096-12 12" (300) 123/4" (323.8) 11/2"-6 11/2" (40) 1/2" x 4" (12.7 x 101.6) 1315 (596.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 129 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3089 - Pipe Adjuster
Size Range: For use with 11⁄2" (40mm) thru 36" (900mm) pipe
Material: Steel
Function: Straight threaded shank that permits adjustment
D
Note:
Nominal pipe size of base
If combining a Figure B3089 (Pipe adjuster) with a Figure B3090
stand - not included
(Pipe Support - pages 131 & 132) the catalog number will
become a Figure B3092 (see pages 135 & 136).
If combining a Figure B3089 (Pipe adjuster) with a Figure B3095
(Pipe Support Saddle - pages 133 & 134) the catalog number will
become a Figure B3093 (see pages 137 & 138).
B3089-11/2 21/2" - 31/2" (65 - 90) 11/2" (40) 21/2" (65) 400 (181.4)
B3089-21/2 4" - 12" (100 - 300) 21/2" (65) 3" (80) 700 (317.5)
B3089-3 14" - 16" (350 - 400) 3" (80) 4" (100) 1000 (453.6)
B3089-4 18" - 36" (450 - 900) 4" (100) 6" (150) 2200 (997.9)
When determining base stand height, add 6” (152.4mm) to the “C” dimension of the support
being utilized on B3090, B3095, B3097, and B3094 pipe and flange supports.
This will provide a vertical adjustment capability of 21/4” (57.1mm) each direction.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 130 Eaton
Pipe Supports, Guides, Shields & Saddles
B3090 - Pipe Support with U-Bolt
Size Range: — 3/4" (20mm) thru 36" (900mm) pipe A
U-Bolt Dia.
Material: — Steel
C
Shields & Saddles
Supports, Guides,
Order By: — Part number and finish * Shank will fit into nominal
Schedule 40 pipe size 'D' of
Base Stand Figure B3088
Note: — For vertical adjustment see Figure B3092 (pages 135 & 136) (not included).
Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3090DI - size.
3” (80) ductile iron uses B3090-31/2
Not available for 36” (900) ductile iron pipe size
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 131 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3090 - Pipe Support with U-Bolt cont.
Steel Size
4"
(101.6) Gussets on sizes B3090-8
and larger.
B (Shank Dia.)
C
Center of pipe to * Shank will fit into nominal
bottom lip of support. Schedule 40 pipe size 'D' of
Base Stand Figure B3088
(not included).
Note: — For vertical adjustment see Figure B3092 (pages 135 & 136)
B C D* Approx. Wt./100
Part No. in. (mm) in. (mm) in. (mm) Lbs. (kg)
B3090-3/4 3/4" (19.0) 2" (50.8) 3/4" (19) 107 (48.5)
B3090-1 3/4" (19.0) 25/32" (54.8) 3/4" (19) 117 (53.1)
B3090-11/4 3/4" (19.0) 221/64" (59.1) 3/4" (19) 149 (67.6)
B3090-11/2 3/4" (19.0) 21/2" (63.5) 3/4" (19) 166 (75.3)
B3090-2 3/4" (19.0) 211/16" (68.3) 3/4" (19) 186 (84.4)
B3090-21/2 15/16" (33.3) 31/8" (79.4) 11/2" (40) 251 (113.8)
B3090-3 15/16" (33.3) 37/16" (87.3) 11/2" (40) 316 (143.3)
B3090-31/2 15/16" (33.3) 311/16" (93.7) 11/2" (40) 317 (143.8)
B3090-4 23/8" (60.3) 41/16" (103.2) 21/2" (65) 586 (265.8)
B3090-5 23/8" (60.3) 417/32" (115.1) 21/2" (65) 621 (281.7)
B3090-6 23/8" (60.3) 55/16" (134.9) 21/2" (65) 895 (406.0)
B3090-8 23/8" (60.3) 63/4" (171.4) 21/2" (65) 1115 (505.7)
B3090-10 23/8" (60.3) 713/16" (198.4) 21/2" (65) 1423 (645.5)
B3090-12 23/8" (60.3) 813/16" (223.8) 21/2" (65) 1846 (837.3)
B3090-14 27/8" (73.0) 109/16" (268.3) 3" (80) 2593 (1176.2)
B3090-16 27/8" (73.0) 119/16" (293.7) 3" (80) 2825 (1281.4)
B3090-18 4" (101.6) 139/16" (344.5) 4" (100) 4843 (2196.8)
B3090-20 4" (101.6) 149/16" (369.9) 4" (100) 5225 (2370.0)
B3090-24 4" (101.6) 169/16" (420.7) 4" (100) 6970 (3161.6)
B3090-30 4" (101.6) 2011/16" (525.5) 4" (100) 8587 (3895.0)
B3090-36 4" (101.6) 2311/16" (601.7) 4" (100) 9977 (4525.5)
Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3090DI - size.
3” (80) ductile iron uses B3090-31/2
Not available for 36” (900) ductile iron pipe size
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 132 Eaton
Pipe Supports, Guides, Shields & Saddles
B3095 - Pipe Saddle Support
E
Size Range: 11⁄2" (40mm) thru 36" (900mm) pipe C A
Material: Steel Shank Length
Steel Size
B
Shields & Saddles
Note: — For vertical adjustment see Figure B3093 (pages 137 & 138)
Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3095DI - size.
3” (80) ductile iron uses B3095-31/2
Not available for 36” (900) ductile iron pipe size
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 133 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3095 - Pipe Saddle Support cont.
Note: — For vertical adjustment see Figure B3093 (pages 137 & 138)
D* E Approx. Wt./100
Part No. in. (mm) in. (mm) Lbs. (kg)
B3095-1 3/4" (20) 11/8" (28.6) 49 (22.2)
B3095-11/4 3/4" (20) 17/16" (36.5) 81 (36.7)
B3095-11/2 3/4" (20) 121/32" (42.0) 88 (39.9)
B3095-2 3/4" (20) 21/16" (52.4) 94 (42.6)
B3095-21/2 11/2" (40) 21/2" (63.5) 167 (75.7)
B3095-3 11/2" (40) 31/32" (77.0) 176 (79.8)
B3095-31/2 11/2" (40) 37/16" (87.3) 188 (85.3)
B3095-4 21/2" (65) 41/4" (107.9) 364 (165.1)
B3095-5 21/2" (65) 413/16" (122.2) 381 (172.8)
B3095-6 21/2" (65) 61/16" (154.0) 534 (242.2)
B3095-8 21/2" (65) 715/16" (201.5) 796 (361.0)
B3095-10 21/2" (65) 95/8" (244.5) 914 (414.6)
B3095-12 21/2" (65) 1111/16" (296.9) 1068 (484.4)
B3095-14 3" (80) 121/8" (308.0) 1654 (750.2)
B3095-16 3" (80) 137/8" (352.4) 1817 (824.2)
B3095-18 4" (100) 1519/32" (396.1) 2798 (1269.2)
B3095-20 4" (100) 175/16" (439.7) 3018 (1368.9)
B3095-24 4" (100) 2025/32" (527.8) 3018 (1368.9)
B3095-30 4" (100) 26" (660.4) 7624 (3458.2)
B3095-36 4" (100) 313/16" (792.2) 8877 (4026.6)
Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3095DI - size.
3” (80) ductile iron uses B3095-31/2
Not available for 36” (900) ductile iron pipe size
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 134 Eaton
Pipe Supports, Guides, Shields & Saddles
B3092 - Adjustable Pipe Saddle Support with Yoke
Size Range: 3/4" (20mm) thru 36" (900mm) pipe
E
Material: Steel with cast iron reducer U-Bolt Dia.
Shields & Saddles
Supports, Guides,
A B
Pipe Size Maximum Minimum Maximum
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3092-3/4 3/4" (19) 13/8" (34.9) 3/4" (19) 53/4" (146.0) 101/4" (260.3)
B3092-1 1" (25) 13/8" (34.9) 3/4" (19) 529/32" (150.0) 1013/32" (264.3)
B3092-11/4 11/4" (32) 111/16" (42.9) 3/4" (19) 65/64" (154.4) 1037/64" (268.7)
B3092-11/2 11/2" (38) 2" (50.8) 3/4" (19) 61/4" (158.7) 103/4" (273.0)
B3092-2 2" (50) 27/16" (61.9) 3/4" (19) 67/16" (163.5) 1015/16" (277.8)
B3092-21/2 1
2 /2" (65) 27/8" (73.0) 11/2" (40) 67/8" (174.6) 113/8" (288.9)
B3092-3 3" (80) 31/2" (88.9) 11/2" (40) 73/16" (182.6) 1111/16" (296.9)
B3092-31/2 31/2" (90) 4" (101.6) 11/2" (40) 77/16" (188.9) 1115/16" (303.2)
B3092-4 4" (100) 47/8" (123.8) 21/2" (65) 713/16" (198.4) 125/16" (312.7)
B3092-5 5" (125) 55/8" (142.9) 21/2" (65) 89/32" (210.3) 1225/32" (324.6)
B3092-6 6" (150) 629/32" (175.4) 21/2" (65) 91/16" (230.2) 139/16" (344.5)
B3092-8 8" (200) 91/8" (231.8) 21/2" (65) 101/2" (266.7) 15" (381.0)
B3092-10 10" (250) 113/32" (281.8) 21/2" (65) 119/16" (293.7) 161/16" (408.0)
B3092-12 12" (300) 133/16" (334.9) 21/2" (65) 129/16" (319.1) 171/16" (433.4)
B3092-14 14" (350) 14" (355.6) 3" (80) 145/16" (363.5) 1813/16" (477.8)
B3092-16 16" (400) 16" (406.4) 3" (80) 155/16" (388.9) 1913/16" (503.2)
B3092-18 18" (450) 18" (457.2) 4" (100) 175/16" (439.7) 2113/16" (554.0)
B3092-20 20" (500) 20" (508.0) 4" (100) 185/16" (465.1) 2213/16" (579.4)
B3092-24 24" (600) 24" (609.6) 4" (100) 205/16" (515.9) 2413/16" (630.2)
B3092-30 30" (750) 30" (762.0) 4" (100) 247/16" (620.7) 2815/16" (735.0)
B3092-36 36" (900) 36" (914.4) 4" (100) 277/16" (696.9) 3115/16" (811.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 135 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3092 - Adjustable Pipe Saddle Support with Yoke cont.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 136 Eaton
Pipe Supports, Guides, Shields & Saddles
B3093 - Adjustable Pipe Saddle Support
Size Range: 1" (25mm) thru 36" (900mm) pipe
Material: Steel with cast iron reducer
Steel Size C
Function: Designed to support horizontal pipe from
Shields & Saddles
Supports, Guides,
A B C
Pipe Size Maximum Minimum Maximum
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3093-1 1" (25) 15/16" (33.3) 3/4" (20) 521/32" (143.6) 105/32" (257.9) 129/32" (48.4)
B3093-11/4 1
1 /4" (32) 111/16" (42.9) 3/4" (20) 553/64" (148.0) 1021/64" (2262.3) 25/64" (52.8)
B3093-11/2 11/2" (40) 129/32" (48.4) 3/4" (20) 6" (152.4) 101/2" (266.7) 21/4" (58.1)
B3093-2 2" (50) 23/8" (60.3) 3/4" (20) 63/16" (157.2) 1011/16" (271.5) 27/16" (61.9)
B3093-21/2 21/2" (65) 27/8" (73.0) 11/2" (40) 65/16" (160.3) 1013/16" (274.6) 29/16" (65.1)
B3093-3 3" (80) 31/2" (88.9) 11/2" (40) 65/8" (168.3) 111/8" (282.6) 27/8" (73.0)
B3093-31/2 31/2" (90) 4" (101.6) 11/2" (40) 67/8" (174.6) 113/8" (288.9) 31/8" (79.4)
B3093-4 4" (100) 47/8" (123.8) 21/2" (65) 71/4" (184.1) 113/4" (298.4) 31/2" (88.9)
B3093-5 5" (125) 59/16" (141.3) 21/2" (65) 725/32" (197.6) 129/32" (311.9) 41/32" (102.4)
B3093-6 6" (150) 7" (177.8) 21/2" (65) 87/16" (214.3) 1215/16" (328.6) 411/16" (119.1)
B3093-8 8" (200) 91/8" (231.8) 21/2" (65) 101/4" (260.3) 143/4" (374.6) 61/2" (165.1)
B3093-10 10" (250) 111/8" (282.6) 21/2" (65) 115/16" (287.3) 1513/16" (401.6) 79/16" (192.1)
B3093-12 12" (300) 131/2" (342.9) 21/2" (65) 121/8" (308.0) 165/8" (422.3) 83/8" (212.7)
B3093-14 14" (350) 14" (355.6) 3" (80) 141/2" (368.3) 19" (482.6) 103/4" (273.0)
B3093-16 16" (400) 16" (406.4) 3" (80) 151/2" (393.7) 20" (508.0) 113/4" (298.4)
B3093-18 18" (450) 18" (457.2) 4" (100) 171/4" (438.1) 213/4" (552.4) 131/2" (342.9)
B3093-20 20" (500) 20" (508.0) 4" (100) 181/4" (463.5) 223/4" (577.8) 141/2" (368.3)
B3093-24 24" (600) 24" (609.6) 4" (100) 211/2" (546.1) 26" (660.4) 173/4" (450.8)
B3093-30 30" (750) 30" (762.0) 4" (100) 245/8" (625.5) 291/8" (739.8) 207/8" (530.2)
B3093-36 36" (900) 36" (914.4) 4" (100) 275/8" (701.7) 321/8" (816.0) 237/8" (606.4)
Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3093DI - size.
3” (80) ductile iron uses B3093-31/2
Not available for 36” (900) ductile iron pipe size
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 137 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3093 - Adjustable Pipe Saddle Support cont.
Approx. Wt./100
D Saddle Steel Size Complete Saddle Only
Part No. in. (mm) in. (mm) Lbs. (kg) Lbs. (kg)
B3093-1 11/2" (40) 1/4" x 13/4" (6.3 x 44.4) 189 (85.7) 49 (22.2)
B3093-11/4 11/2" (40) 1/4" x 13/4" (6.3 x 44.4) 221 (100.2) 81 (36.7)
B3093-11/2 11/2" (40) 1/4" x 13/4" (6.3 x 44.4) 228 (103.4) 88 (39.9)
B3093-2 11/2" (40) 1/4" x 13/4" (6.3 x 44.4) 234 (106.1) 94 (42.6)
B3093-21/2 21/2" (65) 1/4" x 3" (6.3 x 76.2) 567 (257.2) 167 (75.8)
B3093-3 21/2" (65) 1/4" x 3" (6.3 x 76.2) 576 (261.3) 176 (79.9)
B3093-31/2 21/2" (65) 1/4" x 3" (6.3 x 76.2) 588 (266.7) 188 (85.3)
B3093-4 3" (80) 1/4" x 4" (6.3 x 101.6) 1064 (482.6) 364 (165.1)
B3093-5 3" (80) 1/4" x 4" (6.3 x 101.6) 1081 (490.3) 381 (172.8)
B3093-6 3" (80) 3/8" x 4" (9.5 x 101.6) 1234 (559.7) 534 (242.2)
B3093-8 3" (80) 3/8" x 4" (9.5 x 101.6) 1496 (678.6) 796 (361.1)
B3093-10 3" (80) 3/8" x 4" (9.5 x 101.6) 1614 (732.1) 914 (414.6)
B3093-12 3" (80) 3/8" x 4" (9.5 x 101.6) 1768 (801.9) 1068 (484.4)
B3093-14 4" (100) 3/8" x 5" (9.5 x 127.0) 2654 (1203.8) 1654 (750.2)
B3093-16 4" (100) 3/8" x 5" (9.5 x 127.0) 2817 (1277.8) 1817 (824.2)
B3093-18 6" (150) 1/2" x 5" (12.7 x 127.0) 4998 (2267.1) 2798 (1269.1)
B3093-20 6" (150) 1/2" x 5" (12.7 x 127.0) 5218 (2366.8) 3018 (1368.9)
B3093-24 6" (150) 1/2" x 6" (12.7 x 152.4) 6346 (2878.5) 4146 (1880.6)
B3093-30 6" (150) 1" x 6" (25.4 x 152.4) 9824 (4456.1) 7624 (3458.2)
B3093-36 6" (150) 1" x 6" (25.4 x 152.4) 11077 (5024.4) 8877 (4026.5)
Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3093DI - size.
3” (80) ductile iron uses B3093-31/2
Not available for 36” (900) ductile iron pipe size
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 138 Eaton
Pipe Supports, Guides, Shields & Saddles
B3097 - Pipe Saddle Support With Strap
A
Size Range: Size 4" (100mm) thru 36" (900mm) pipe
Material: Steel
Function: Designed to support horizontal pipe from
Shields & Saddles
Supports, Guides,
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 139 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3098 - Adjustable Pipe Support With U-Bolt
Size Range: 2" (50mm) thru 12" (300mm) pipe
Material: Steel
Function: Designed to support horizontal pipe from C
8"
(202.3)
Pipe Size Max. Pipe O.D. A Bolt Size C Use With B3088 Approx. Wt./100
Part No. in. (mm) in. (mm) in. (mm) B in. (mm) Pipe Stand Lbs. (kg)
B3098-2 2" (50) 23/4" (69.8) 6" (152.4) 7/8"-9 3/8" (9.5) 1" 210 (95.2)
B3098-21/2 21/2" (650) 31/4" (82.5) 61/2" (165.1) 7/8"-9 3/8" (9.5) 1" 219 (99.3)
B3098-3 3" (80) 31/2" (88.9) 63/4" (171.4) 7/8"-9 1/2" (12.7) 1" 240 (108.8)
B3098-31/2 1
3 /2" (90) 4" (101.6) 63/4" (171.4) 7/8"-9 1/2" (12.7) 1" 240 (108.8)
B3098-4 4" (100) 47/8" (123.8) 71/2" (190.5) 1"-8 1/2" (12.7) 1" 340 (154.2)
B3098-5 5" (125) 55/8" (142.9) 73/4" (196.8) 1"-8 1/2" (12.7) 1" 360 (163.3)
B3098-6 6" (150) 7" (177.8) 83/8" (212.7) 11/4"-7 5/8" (15.9) 11/4" 580 (263.1)
B3098-8 8" (200) 1
9 /8" (231.8) 91/2" (241.2) 11/4"-7 5/8" (15.9) 11/4" 640 (290.3)
B3098-10 10" (250) 111/8" (282.6) 10" (254.0) 11/4"-7 3/4" (19.0) 11/4" 1060 (480.8)
B3098-12 12" (300) 131/2" (342.9) 111/4" (285.7) 11/4"-7 7/8" (22.2) 11/4" 1060 (480.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 140 Eaton
Pipe Supports, Guides, Shields & Saddles
B3094 - Flange Support A
H
Gussets on sizes B
B3097-8 and larger.
'E' Shank Diameter
* Shank will fit into nominal
Schedule 40 pipe size 'D' of Sizes 14” (350mm) thru
Base Stand Figure B3088 36” (900mm)
(not included).
B3094-4 4" (100) 63/8" (161.9) 2" (50.8) 67/8" (174.5) 21/2" (63.5) 23/8" (60.3) 3/4" (19.0) 707 (320.7)
B3094-5 5" (125) 71/16" (179.4) 2" (50.8) 73/8" (187.3) 21/2" (63.5) 23/8" (60.3) 7/8" (22.2) 775 (351.5)
B3094-6 6" (150) 73/4" (196.8) 2" (50.8) 73/8" (187.3) 21/2" (63.5) 23/8" (60.3) 7/8" (22.2) 844 (382.8)
B3094-8 8" (200) 99/16" (242.9) 2" (50.8) 101/8" (257.2) 21/2" (63.5) 23/8" (60.3) 7/8" (22.2) 1429 (648.2)
B3094-10 10" (250) 8" (203.2) 2" (50.8) 113/8" (288.8) 21/2" (63.5) 23/8" (60.3) 1" (25.4) 1250 (567.0)
B3094-12 12" (300) 1
9 /2" (241.3) 3" (76.2) 127/8" (327.0) 21/2" (63.5) 23/8" (60.3) 1" (25.4) 1446 (655.9)
B3094-14 14" (350) 183/16" (462.0) 3" (76.2) 15" (381.0) 3" (76.2) 27/8" (73.0) 11/8" (28.6) 3149 (1429.4)
B3094-16 16" (400) 165/8" (422.3) 3" (76.2) 161/4" (412.7) 3" (76.2) 27/8" (73.0) 11/8" (28.6) 3068 (1391.6)
B3094-18 18" (450) 1711/16" (449.3) 4" (101.6) 18" (457.2) 4" (101.6) 33/4" (95.2) 11/4" (31.7) 3339 (1514.6)
B3094-20 20" (500) 153/4" (400.0) 4" (101.6) 191/4" (488.9) 4" (101.6) 33/4" (95.2) 11/4" (31.7) 2994 (1358.1)
B3094-24 24" (600) 183/8" (466.7) 4" (101.6) 221/2" (571.5) 4" (101.6) 33/4" (95.2) 13/8" (34.9) 4255 (1930.0)
B3094-30 30" (750) 163/8" (415.9) 4" (101.6) 257/8" (657.2) 4" (101.6) 33/4" (95.2) 13/8" (34.9) 5210 (2363.2)
B3094-36 36" (900) 171/2" (444.5) 4" (101.6) 291/2" (749.3) 4" (101.6) 33/4" (95.2) 15/8" (41.3) 5382 (2441.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 141 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3195 - I.P.S. Isolator C
B3195CT - Copper Tubing Isolator
B
Size Range:
Supports, Guides,
B3195CT - 3⁄8" (10mm) thru 4" (100mm) pipe
Material: Pre-Galvanized steel and felt
Function: A non-conductive felt lining serves to
dampen sound vibration and prevent transmission of
sound to the building structure.
Finish: Pre-Galvanized A
Standard Steel Pipe Hangers for use with Isolators:
B3100 clevis hanger, B3690 J-hanger and B2000 Series
rigid or O.D. pipe clamps
Order By: Part number and finish
B3195-3/8 3/8" (10) 11/8" (28.6) 11/4" (31.7) 21/4" (57.1) 1" (25) 1" (25) Rigid 4 (1.8)
B3195-1/2 1/2" (15) 13/8" (34.9) 11/4" (31.7) 21/4" (57.1) 1" (25) 1" (25) Rigid 4 (1.8)
B3195-3/4 3/4" (20) 11/2" (38.1) 11/4" (31.7) 21/4" (57.1) 11/4" (32) 11/4" (32) O.D. 6 (2.7)
B3195-1 1" (25) 113/16" (46.0) 11/4" (31.7) 21/4" (57.1) 11/2" (40) 11/2" (38) O.D. 10 (4.5)
B3195-11/4 1
1 /4" (32) 21/8" (54.0) 11/4" (31.7) 21/4" (57.1) 2" (50) 2" (51) O.D. 10 (4.5)
B3195-11/2 11/2" (40) 23/8" (60.3) 11/4" (31.7) 21/4" (57.1) 2" (50) 2" (50) Rigid 12 (5.4)
B3195-2 2" (50) 27/8" (73.0) 11/4" (31.7) 21/4" (57.1) 21/2" (65) 21/2" (65) Rigid 14 (6.3)
B3195-21/2 21/2" (65) 33/8" (85.7) 11/4" (31.7) 3" (76.2) 3" (80) 3" (76) O.D. 20 (9.1)
B3195-3 3" (80) 4" (101.6) 11/4" (31.7) 3" (76.2) 1
3 /2" (90) 1
3 /2" (90) Rigid 25 (11.3)
B3195-31/2 31/2" (90) 41/2" (114.3) 11/4" (31.7) 3" (76.2) 4" (100) 4" (100) Rigid 36 (16.3)
B3195-4 4" (100) 51/2" (139.7) 11/4" (31.7) 31/2" (88.9) 5" (125) 5" (125) Rigid 65 (29.5)
B3195-5 5" (125) 61/2" (165.1) 11/4" (31.7) 4" (101.6) 6" (150) 6" (150) Rigid 67 (30.4)
B3195-6 6" (150) 75/8" (193.7) 21/8" (54.0) 51/2" (139.7) 8" (200) 75/8" (193) O.D. 196 (88.9)
B3195-8 8" (200) 95/8" (244.5) 21/8" (54.0) 51/2" (139.7) 10" (250) 95/8" (244) O.D. 210 (95.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 142 Eaton
Pipe Supports, Guides, Shields & Saddles
Body R S T U V
Size in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
001 31/2" (88.9) 5/8" (15.9) 57/8" (149.2) 41/8" (104.8) 13/4" (44.4)
002 4" (101.6) 5/8" (15.9) 63/4" (171.4) 43/8" (111.1) 13/4" (44.4)
003 43/8" (111.1) 5/8" (15.9) 75/8" (193.7) 51/8" (130.2) 13/4" (44.4)
004 51/4" (133.3) 5/8" (15.9) 91/4" (234.9) 61/8" (155.6) 13/4" (44.4)
005 61/4" (158.7) 5/8" (15.9) 115/8" (295.3) 7" (177.8) 23/4" (69.8)
006 7" (177.8) 5/8" (15.9) 133/8" (339.7) 81/4" (209.5) 23/4" (69.8)
007 77/8" (200.0) 3/4" (19.0) 151/8" (384.2) 97/8" (250.8) 4" (101.6)
008 87/8" (225.4) 3/4" (19.0) 17" (431.8) 107/8" (276.2) 4" (101.6)
009 93/4" (247.6) 3/4" (19.0) 183/4" (476.2) 117/8" (301.6) 4" (101.6)
010 107/8" (276.2) 3/4" (19.0) 21" (533.4) 113/4" (298.4) 6" (152.4)
011 121/8" (308.0) 7/8" (22.2) 231/8" (587.4) 141/2" (368.3) 6" (152.4)
012 13" (330.2) 7/8" (22.2) 25" (635.0) 151/2" (393.7) 6" (152.4)
013 143/4" (374.6) 11/8" (28.6) 273/4" (704.8) 171/8" (435.0) 6" (152.4)
014 161/2" (419.1) 11/8" (28.6) 311/2" (800.1) 191/4" (488.9) 6" (152.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 143 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3281 thru B3287 - Pipe Alignment Guide cont.
Insulation Thickness
Pipe Size 1" (25.4mm) 11/2" (38.1mm) 2" (50.8mm) 21/2" (63.5mm)
Part No. BS* SAM** Part No. BS* SAM** Part No. BS* SAM** Part No. BS* SAM**
Insulation Thickness
Nominal 3" (76.2) 31/2" (88.9) 4" (101.6)
Pipe Size Part No. BS* SAM** Part No. BS* SAM** Part No. BS* SAM**
1/2" (15) B3285-1/2 004 4" (101.6) B3285-1/2 004 4" (101.6) B3287-1/2 005 4" (101.6)
3/4" (20) B3284-3/4 004 4" (101.6) B3286-3/4 005 4" (101.6) B3286-3/4 005 4" (101.6)
1" (25) B3284-1 004 4" (101.6) B3286-1 005 4" (101.6) B3286-1 005 4" (101.6)
BS* = Body Size
11/4" (32) B3284-11/4 004 4" (101.6) B3286-11/4 005 4" (101.6) B3286-11/4 005 4" (101.6)
11/2" (40) B3284-11/2 004 4" (101.6) B3286-11/2 005 4" (101.6) B3286-11/2 005 4" (101.6) SAM** = Standard
Allowable Movement
2" (50) B3285-2 005 4" (101.6) B3285-2 005 4" (101.6) B3287-2 006 4" (101.6)
21/2" (65) B3285-21/2 005 4" (101.6) B3285-21/2 005 4" (101.6) B3287-21/2 006 4" (101.6) Note: Use 1” (25.4mm)
3" (80) B3284-3 005 4" (101.6) B3286-3 006 4" (101.6) B3286-3 006 4" (101.6) insulation thickness
column when no
4" (100) B3285-4 006 4" (101.6) B3286-4 006 4" (101.6) B3287-4 007 6" (152.4) insulation is present.
5" (125) B3284-5 006 4" (101.6) B3286-5 007 6" (152.4) B3287-5 008 6" (152.4)
6" (150) B3285-6 007 6" (152.4) B3286-6 008 6" (152.4) B3286-6 008 6" (152.4)
8" (200) B3284-8 008 6" (152.4) B3286-8 009 6" (152.4) B3286-8 009 6" (152.4)
10" (250) B3284-10 009 6" (152.4) B3286-10 010 6" (152.4) B3286-10 010 6" (152.4)
12" (300) B3284-12 010 6" (152.4) B3286-12 011 6" (152.4) B3286-12 011 6" (152.4)
14" (350) B3285-14 011 8" (203.2) B3285-14 011 8" (203.2) B3287-14 012 8" (203.2)
16" (400) B3285-16 012 8" (203.2) B3285-16 012 8" (203.2) B3287-16 013 8" (203.2)
18" (450) B3285-18 013 8" (203.2) B3285-18 013 8" (203.2) B3287-18 014 8" (203.2)
20" (500) B3285-20 014 8" (203.2) B3285-20 014 8" (203.2) B3285-20 014 8" (203.2)
24" (600) --- --- --- --- --- --- --- --- --- --- --- ---
Installation: Attach outer housing of the first pipe guide to the structure a maximum of four pipe diameters from an expansion joint.
The second pipe guide should be located a maximum of 14 pipe diameters from the first pipe guide. The spider pipe clamp should be
offset at a minimum of half the distance in the opposite direction of the axial expansion. See chart for Standard Allowable Movement (SAM).
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 144 Eaton
Pipe Supports, Guides, Shields & Saddles
B2417 - Strut Mounted Pipe Guide
Material: Steel
Finish: Electro-Galvanized
Function: Designed as a guide to permit
Shields & Saddles
Supports, Guides,
Clearance
Size Range: For use with 1⁄2" (15mm) thru 24" (600mm) pipe
Material: Steel
B
C
Function: Recommended for anchoring pipe to structure. Type A
Finish: Plain
A
Note: 1⁄2" (15mm) thru 4" (100mm), use U-bolt to fasten chair Center of pipe to bottom
to support; 5" (125mm) thru 24" (600mm) U-bolt attaches of base plate.
directly to support structure.
Holes are provided in chair for fastening to support if required.
Available in Electro-Galvanized and Hot Dip Galvanized 13/16” (30.2mm) x
U-Bolt Dia.
finish or Stainless Steel materials. 11/16” (27.0mm)
2 Holes
D
Order By: Part number and pipe size
B C Type B
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 145 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3147A & B3147B - Pipe Anchor cont.
B3147A-1/2 1/2" (15) 1/4" (6.3) 15/16" (23.8) 23/16" (55.5) 13/16" (30.2) -- (--) 80 (36.3)
B3147A-3/4 3/4" (20) 1/4" (6.3) 11/16" (27.0) 23/8" (60.3) 13/8" (34.9) -- (--) 88 (39.9)
B3147A-1 1" (25) 1/4" (6.3) 13/16" (30.2) 25/8" (66.7) 15/8" (41.3) -- (--) 96 (43.5)
B3147A-11/4 11/4" (32) 3/8" (9.4) 13/8" (34.9) 27/8" (73.0) 21/16" (52.4) -- (--) 107 (48.5)
B3147A-11/2 11/2" (40) 3/8" (9.4) 19/16" (39.7) 31/4" (82.5) 23/8" (60.3) -- (--) 118 (53.5)
Type A
B3147A-2 2" (50) 3/8" (9.4) 13/4" (44.4) 35/8" (92.1) 23/4" (69.8) -- (--) 132 (59.9)
B3147A-21/2 21/2" (65) 1/2" (12.7) 2" (50.8) 415/16" (125.4) 37/16" (87.3) -- (--) 175 (79.4)
B3147A-3 3" (80) 1/2" (12.7) 3
2 /8" (60.3) 59/16" (141.3) 41/16" (103.2) -- (--) 215 (97.5)
B3147A-31/2 31/2" (90) 1/2" (12.7) 23/8" (60.3) 61/16" (154.0) 49/16" (115.9) -- (--) 240 (108.8)
B3147A-4 4" (100) 1/2" (12.7) 27/8" (73.0) 69/16" (166.7) 51/16" (128.6) -- (--) 265 (120.2)
B3147B-5 5" (125) 1/2" (12.7) 37/16" (87.3) 4" (101.6) 65/32" (156.3) 21/4" (57.1) 290 (131.5)
B3147B-6 6" (150) 5/8" (15.9) 4" (101.6) 5" (127.0) 73/8" (187.3) 3" (76.2) 315 (142.9)
B3147B-8 8" (200) 5/8" (15.9) 51/4" (133.3) 7" (177.9) 93/8" (138.0) 51/2" (139.7) 885 (401.4)
B3147B-10 10" (250) 3/4" (19.0) 67/16" (164.1) 8" (203.2) 115/8" (295.2) 51/2" (139.7) 1050 (476.3) Type B
B3147B-12 12" (300) 7/8" (22.2) 71/2" (190.5) 9" (228.6) 133/4" (349.2) 6" (152.4) 1210 (548.8)
B3147B-14 14" (350) 7/8" (22.2) 83/16" (208.0) 10" (254.0) 15" (381.0) 7" (177.9) 1480 (671.3)
B3147B-16 16" (400) 7/8" (22.2) 91/4" (234.9) 10" (254.0) 17" (431.8) 7" (177.9) 1735 (787.0)
B3147B-18 18" (450) 1" (25.4) 103/8" (263.5) 11" (279.4) 191/8" (485.8) 7" (177.9) 2011 (912.2)
B3147B-20 20" (500) 1" (25.4) 113/8" (288.9) 12" (304.8) 211/8" (536.6) 7" (177.9) 2332 (1057.8)
B3147B-24 24" (600) 1" (25.4) 135/8" (346.1) 12" (304.8) 251/8" (638.2) 8" (203.2) 2550 (1156.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 146 Eaton
Pipe Supports, Guides, Shields & Saddles
B3256 Hold-Down Anchor Clamp
Size Range: 2" (50mm) thru 30" (750mm) pipe H
2 Holes
Material: Steel Steel Size Steel Size
Function: Designed to prevent longitudinal or
Shields & Saddles
Supports, Guides,
R R
lateral movement of pipe where pipe is anchored E
to concrete piers or other supporting structures. H
C A A 4 Holes
Finish: Plain or Electro-Galvanized C
B
Order By: Part number and finish. B
D
D
D
B3256-2 thru B3256-8 B3256-10 thru B3256-30
Pipe Size A B C D E
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3256-2 2" (50) 15/16" (23.8) 81/8" (206.4) 57/8" (149.2) 11/2" (38.1) - -
B3256-21/2 21/2" (65) 13/16" (30.2) 85/8" (219.1) 63/8" (161.9) 11/2" (38.1) - -
B3256-3 3" (50) 11/2" (38.1) 91/4" (234.9) 7" (177.8) 11/2" (38.1) - -
B3256-31/2 31/2" (80) 13/4" (44.4) 93/4" (247.6) 71/2" (190.5) 11/2" (38.1) - -
B3256-4 4" (90) 2" (50.8) 101/4" (260.3) 8" (203.2) 11/2" (38.1) - -
B3256-5 5" (100) 29/16" (65.1) 115/16" (287.3) 91/16" (230.2) 11/2" (38.1) - -
B3256-6 6" (150) 31/16" (77.8) 139/16" (346.1) 105/8" (269.9) 3" (76.2) - -
B3256-8 8" (200) 41/16" (103.2) 153/4" (396.9) 125/8" (320.7) 3" (76.2) - -
B3256-10 10" (250) 51/8" (130.2) 183/4" (476.2) 151/4" (387.3) 21/2" (63.5) 1/2" (12.7)
B3256-12 12" (300) 61/8" (155.6) 203/4" (527.0) 171/4" (438.1) 21/2" (63.5) 1/2" (12.7)
B3256-14 14" (350) 63/4" (171.4) 22" (558.8) 181/2" (469.9) 3" (76.2) 1/2" (12.7)
B3256-16 16" (400) 73/4" (196.8) 24" (609.6) 201/2" (520.7) 3" (76.2) 1/2" (12.7)
B3256-18 18" (450) 83/4" (222.2) 26" (660.4) 221/2" (571.2) 31/2" (88.9) 1/2" (12.7)
B3256-20 20" (500) 93/4" (247.6) 28" (711.2) 241/2" (622.3) 31/2" (88.9) 1/2" (12.7)
B3256-24 24" (600) 113/4" (298.4) 32" (812.8) 281/2" (723.9) 31/2" (88.9) 1/2" (12.7)
B3256-30 30" (750) 143/4" (374.6) 38" (965.2) 341/2" (876.3) 31/2" (88.9) 1/2" (12.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 147 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3257 - Base Plate Steel Size
H
4 Holes
Size Range: 2" (50mm) thru 30" (750mm) pipe
B A A
Material: Steel
Function: Designed as a base plate for B3256
Pipe Size A B C D
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3257-2 2" (50) 81/8" (206.4) 57/8" (149.2) 11/8" (28.6) 11/2" (38.1)
B3257-21/2 21/2" (65) 85/8" (219.1) 63/8" (161.9) 11/8" (28.6) 11/2" (38.1)
B3257-3 3" (80) 91/4" (234.9) 7" (177.8) 11/8" (28.6) 11/2" (38.1)
B3257-31/2 31/2" (90) 93/4" (247.6) 71/2" (190.5) 11/8" (28.6) 11/2" (38.1)
B3257-4 4" (100) 101/4" (260.3) 8" (203.2) 11/8" (28.6) 11/2" (38.1)
B3257-5 5" (125) 115/16" (287.3) 91/16" (230.2) 11/8" (28.6) 11/2" (38.1)
B3257-6 6" (150) 135/8" (346.1) 105/8" (269.9) 11/2" (38.1) 3" (76.2)
B3257-8 8" (200) 155/8" (396.9) 125/8" (320.7) 11/2" (38.1) 3" (76.2)
B3257-10 10" (250) 183/4" (476.2) 151/4" (387.3) 13/4" (44.4) 11/2" (38.1)
B3257-12 12" (300) 203/4" (527.0) 171/4" (438.1) 13/4" (44.4) 11/2" (38.1)
B3257-14 14" (350) 22" (558.8) 181/2" (469.9) 13/4" (44.4) 2" (50.8)
B3257-16 16" (400) 24" (609.6) 201/2" (520.7) 13/4" (44.4) 2" (50.8)
B3257-18 18" (450) 26" (660.4) 221/2" (571.5) 13/4" (44.4) 21/2" (63.5)
B3257-20 20" (500) 28" (711.2) 241/2" (622.3) 13/4" (44.4) 21/2" (63.5)
B3257-24 24" (600) 32" (812.8) 281/2" (723.9) 13/4" (44.4) 21/2" (63.5)
B3257-30 30" (750) 38" (965.2) 341/2" (876.3) 13/4" (44.4) 21/2" (63.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 148 Eaton
Pipe Supports, Guides, Shields & Saddles
B3891 - B3897 Pipe Slide Assembly Series
Material: Tee - Steel;
Facing Plate - Stainless Steel Type 304;
Base - Steel with 3/32” (2.4mm) thick Teflon®† slide
Shields & Saddles
Supports, Guides,
pads.
Finish: Black paint.
Service: Designed to support pipe where
horizontal movement from expansion and
contraction is present. Fits up to 3” (76.2mm)
insulation thickness.
Approvals: Conforms to Federal Specification
B3891 - 10 - CL WW-H-171E & A-A-1192A and Manufacturers
Standardization Society ANSI/MSS SP-69 & SP-58,
Type 35.
Base Style Travel Options Operating Temperature Rating:
1 04” (101) (except B3897) Standard Slide = Blank 400°F (204°C) maximum
2 10” (254) (except B3897) W/ End Plates = EP - Pipe Size
Loading: Capable of supporting constant loads up
3 21/2” (63) (B3897 only) W/ B3140 Clamps = CL - Pipe Size
to 2000 Psi at 70°F (21°C).
4
5 † Mark shown in this document is the property of its respective owner.
6
7
Notes:
B3891, B3892 and B3893 are designed for longitudinal movement only.
B3894, B3895 and B3896 are designed for longitudinal and limited
transverse movement.
B3897 is designed for up to 5 inches (127mm) of horizontal movement in
any direction, depending on the installed position.
B3896 B3897
Options:
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 149 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3891 - B3897 - Pipe Slide Assembly Series
Max
Pipe Travel Width P Width W Recommended Load
Size In. mm Part No. In. mm In. mm Lbs. kN
21/2” (63.5) B3897 N/A N/A 91/2" (241.3) 16000 (71.2)
B3891 4" (101.6) N/A N/A 12000 (53.4)
B3892 4" (101.6) 7" (177.8) 12000 (53.4)
B3893 4" (101.6) 7" (177.8) 12000 (53.4)
4" (127.0)
B3894 N/A N/A 6" (152.4) 12000 (53.4)
B3895 6" (152.4) 10" (254.0) 24000 (106.8)
1" to 24" B3896 6" (152.4) 10" (254.0) 24000 (106.8)
(25 to 600) B3891 4" (101.6) N/A N/A 12000 (53.4)
B3892 4" (101.6) 7" (177.8) 12000 (53.4)
B3893 4" (101.6) 7" (177.8) 12000 (53.4)
10" (254.0)
B3894 N/A N/A 6" (152.4) 12000 (53.4)
B3895 6" (152.4) 10" (254.0) 24000 (106.8)
B3896 6" (152.4) 10" (254.0) 24000 (106.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 150 Eaton
Pipe Supports, Guides, Shields & Saddles
B3891 - B3897 - Pipe Slide Assembly Series
B
L
1 1 1
1
/16" P /16" /2" 1" P 1" /2"
W W
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 151 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3891 - B3897 - Pipe Slide Assembly Series
1 1 P 1
/16" P /16" W /2"
1
W /2" 1" 1"
B3893 Front View B3896 Front View
B3897 Views
Field weld
pipe to tee.
Stainless steel facing 21/2" 21/2"
H plate on tee - filled
Teflon® on disc.
21/2" B 21/2" B
L L
B3897 Front View B3897 Side View
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 152 Eaton
Pipe Supports, Guides, Shields & Saddles
B3991 - B3993B Material: Tee & H Slides - Steel with Heat Cured PTFE modified coating at
Pipe Slide Assembly Series slide plate.
Base - Steel with 3/32” (2.4mm) thick Teflon®† slide pads.
Finish: Black paint.
Shields & Saddles
Supports, Guides,
B3993 - 5 - 04 - CL
T-Slide
B3993-5 B3993B-5 B3991-5
H-Slide
B3993-10 B3993B-10 B3991-10
Options:
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 153 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3991 - B3993B - Pipe Slide Assembly Series
Max
Pipe Travel Width P Width W Recommended Load
Size In. mm Part No. In. mm In. mm Lbs. kN
B3991-5 6" (152.4) N/A N/A 16000 (71.2)
B3993-5 2" (50.8) 41/2" (114.3) 12000 (53.4)
B3993B-5 2" (50.8) 41/2" (114.3) 12000 (53.4)
4" (101.6)
B3991-10 12" (304.8) N/A N/A 32000 (142.3)
B3993-10 6" (152.4) 811/16" (220.7) 24000 (106.8)
1" to 24" B3993B-10 6" (152.4) 811/16" (220.7) 24000 (106.8)
(25 to 600) B3991-5 6" (152.4) N/A N/A 16000 (71.2)
B3993-5 2" (50.8) 41/2" (114.3) 12000 (53.4)
B3993B-5 2" (50.8) 41/2" (114.3) 12000 (53.4)
10" (254.0)
B3991-10 12" (304.8) N/A N/A 32000 (142.3)
B3993-10 6" (152.4) 811/16" (220.7) 24000 (106.8)
B3993B-10 6" (152.4) 811/16" (220.7) 24000 (106.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 154 Eaton
Pipe Supports, Guides, Shields & Saddles
B3991 - Pipe Slide Assembly Series dimensional drawings
Pipe to be field
welded to
T or H slides.
Shields & Saddles
Supports, Guides,
3/4” 3/4”
3/4” P 3/4” P
(19) (19)
(19) (19)
C C
B3991-5 Front View B3991-10 Front View
Pipe to be field
welded to
T or H slides.
H
BOP
P
P
W W
B3993-5 Front View B3993-10 Front View
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 155 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3993B Pipe Slide Assembly Series dimensional drawings
Pipe to be field
welded to
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 156 Eaton
Pipe Supports, Guides, Shields & Saddles
B3160 thru B3165 - Pipe Covering Protection Saddle
Material: Steel; Stainless Steel available
Standard Finish: Plain or Electro-Galvanized
Service: Designed to protect pipe insulation
Shields & Saddles
Supports, Guides,
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 157 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3160 thru B3165 - Pipe Covering Protection Saddle cont.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 158 Eaton
Pipe Supports, Guides, Shields & Saddles
B3160 thru B3165 - Pipe Covering Protection Saddle cont.
Insulation Part Insulation Part
Thickness Number Thickness Number
1" (25.4mm) B3160 21/2" (63.5mm) B3163
11/2" (38.1mm) B3161 3" (76.2mm) B3164
Shields & Saddles
Supports, Guides,
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 159 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3160 thru B3165 - Pipe Covering Protection Saddle cont.
Insulation Part Insulation Part
Thickness Number Thickness Number
1" (25.4mm) B3160 21/2" (63.5mm) B3163 C A C B
11/2" (38.1mm) B3161 3" (76.2mm) B3164
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 160 Eaton
Pipe Supports, Guides, Shields & Saddles
B3160 thru B3165 - Pipe Covering Protection Saddle cont.
Insulation Part Insulation Part
Thickness Number Thickness Number
1" (25.4mm) B3160 21/2" (63.5mm) B3163
11/2" (38.1mm) B3161 3" (76.2mm) B3164
Shields & Saddles
Supports, Guides,
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 161 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3160 thru B3165 - Pipe Covering Protection Saddle cont.
Insulation Part Insulation Part
Thickness Number Thickness Number
C A C B
1" (25.4mm) B3160 21/2" (63.5mm) B3163
11/2" (38.1mm) B3161 3" (76.2mm) B3164
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 162 Eaton
Pipe Supports, Guides, Shields & Saddles
Selection Tables for:
Insulation Protection Shields B3151 Insulation Protection Shield (Page 164)
B3153 Insulation Protection Shield with 'Loc' Tabs (Page 164)
B3154 Short Insulation Protection Shield (Page 165)
Shield Size Selection Table B3155 Short Insulation Protection Shield with 'Loc' Tabs (Page 165)
Nominal Pipe Insulation Thickness
Shields & Saddles
Supports, Guides,
or Tubing Size
1 3
in. (mm) /2" (12.7mm) /4" (19.0mm) 1" (25.4mm) 11/2" (38.1mm) 2" (50.8mm) 21/2" (63.5mm) 3" (76.2mm) 4" (101.6mm)
1/2" (15) 1X 2X 3X 5X 7X -- -- --
3/4" (20) 2X 3X 3X 5X 7X -- -- --
1" (25) 2X 3X 4X 6X 8X -- -- --
11/4" (32) 3X 4X 4X 7X 8X -- -- --
11/2" (40) 3X 4X 5X 7X 9X -- -- --
2" (50) 4X 5X 6X 8X 9X 10X* 11X* --
21/2" (65) 5X 6X 7X 9X 10X* 11X* 11X* 13Y*
3" (80) 6X 7X 8X 9X 10X* 11X* 12Y* 14Z
31/2" (90) 7X 8X 9X 10X* 11X* 12Y* 13Y* 15Z
4" (100) 8X 9X 9X 10X* 11X* 12Y* 13Y* 15Z
5" (125) -- -- 10Y* 11Y* 12Y* 13Y* 14Z 16Z
6" (150) -- -- 11Y* 12Y* 13Y* 14Z 15Z 17Z
8" (200) -- -- 13Y* 14Z 15Z 16Z 17Z 19Z
10" (250) -- -- 15Z 16Z 17Z 18Z 19Z 21Z
12" (300) -- -- 17Z 18Z 19Z 20Z 21Z 23Z
14" (350) -- -- 18Z 19Z 20Z 21Z 22Z 24Z
16" (400) -- -- 20Z 21Z 22Z 23Z 24Z 26Z
18" (450) -- -- 22Z 23Z 24Z 25Z 26Z 28Z
20" (500) -- -- 24Z 25Z 26Z 27Z 28Z 30Z
24" (600) -- -- 28Z 29Z 30Z 31Z 32Z 33Z
*When selecting B3154 or B3155, replace 'X' or 'Y' designation with 'Z'.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 163 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
B3151 - Insulation Protection Shield
B3153 - Insulation Protection Shield with "Loc" Tabs
Material: Steel (Stainless steel available)
Function: Designed to protect pipe insulation when used
Stock Size
B3153 same dimension as B3151, but with bottom tabs for centering B3153
and securing the shield to hanger.
Part Part Stock Size L Shield 'I.D.' Approx. Wt./100 Pipe Hanger Size
No. No. in. (mm) in. (mm) in. (mm) Lbs. (kg) in. (mm)
B3151-1X B3153-1X 18 Ga. (1.2) 12" (304.8) 1.90 (48.2) 50 (22.7) 11/2" (40)
B3151-2X B3153-2X 18 Ga. (1.2) 12" (304.8) 2.38 (60.4) 62 (28.1) 2" (50)
B3151-3X B3153-3X 18 Ga. (1.2) 12" (304.8) 2.88 (73.1) 75 (34.0) 21/2" (65)
B3151-4X B3153-4X 18 Ga. (1.2) 12" (304.8) 3.50 (88.9) 92 (41.7) 3" (80)
B3151-5X B3153-5X 18 Ga. (1.2) 12" (304.8) 4.00 (101.6) 104 (47.2) 31/2" (90)
B3151-6X B3153-6X 18 Ga. (1.2) 12" (304.8) 4.50 (114.3) 118 (53.5) 4" (100)
B3151-7X B3153-7X 18 Ga. (1.2) 12" (304.8) 5.00 (127.0) 129 (58.5) 5" (125)
B3151-8X B3153-8X 18 Ga. (1.2) 12" (304.8) 5.56 (141.2) 147 (66.7) 5" (125)
B3151-9X B3153-9X 16 Ga. (1.5) 12" (304.8) 6.64 (168.6) 219 (99.3) 6" (150)
B3151-10X B3153-10X 16 Ga. (1.5) 12" (304.8) 7.64 (194.0) 253 (114.7) 8" (200)
B3151-11X B3153-11X 16 Ga. (1.5) 12" (304.8) 8.64 (219.4) 286 (129.7) 8" (200)
B3151-10Y -- 16 Ga. (1.5) 18" (457.2) 7.64 (194.0) 377 (171.0) 8" (200)
B3151-11Y -- 16 Ga. (1.5) 18" (457.2) 8.64 (219.4) 424 (192.3) 8" (200)
B3151-12Y -- 16 Ga. (1.5) 18" (457.2) 9.64 (244.8) 475 (215.4) 10" (250)
B3151-13Y -- 16 Ga. (1.5) 18" (457.2) 10.76 (273.3) 529 (239.9) 10" (250)
B3151-14Z -- 14 Ga. (1.9) 24" (609.6) 11.76 (298.7) 964 (437.3) 12" (300)
B3151-15Z -- 14 Ga. (1.9) 24" (609.6) 12.76 (324.1) 1045 (474.0) 12" (300)
B3151-16Z -- 14 Ga. (1.9) 24" (609.6) 14.00 (355.6) 1146 (519.8) 14" (350)
B3151-17Z -- 14 Ga. (1.9) 24" (609.6) 15.00 (381.0) 1227 (556.5) 16" (400)
B3151-18Z -- 14 Ga. (1.9) 24" (609.6) 16.00 (406.4) 1308 (593.3) 16" (400)
B3151-19Z -- 14 Ga. (1.9) 24" (609.6) 17.00 (431.8) 1393 (631.8) 18" (450)
B3151-20Z -- 12 Ga. (2.6) 24" (609.6) 18.00 (457.2) 2064 (936.2) 18" (450)
B3151-21Z -- 12 Ga. (2.6) 24" (609.6) 19.00 (482.6) 2178 (987.9) 20" (500)
B3151-22Z -- 12 Ga. (2.6) 24" (609.6) 20.00 (508.0) 2292 (1039.6) 20" (500)
B3151-23Z -- 12 Ga. (2.6) 24" (609.6) 21.00 (533.4) 2406 (1091.3) 24" (600)
B3151-24Z -- 12 Ga. (2.6) 24" (609.6) 22.00 (558.8) 2520 (1143.1) 24" (600)
B3151-25Z -- 12 Ga. (2.6) 24" (609.6) 23.00 (584.2) 2634 (1194.8) 24" (600)
B3151-26Z -- 12 Ga. (2.6) 24" (609.6) 24.00 (609.6) 2753 (1248.7) 24" (600)
B3151-27Z -- 12 Ga. (2.6) 24" (609.6) 25.00 (635.0) 2862 (1298.2) 30" (750)
B3151-28Z -- 12 Ga. (2.6) 24" (609.6) 26.00 (660.4) 2980 (1351.7) 30" (750)
B3151-29Z -- 12 Ga. (2.6) 24" (609.6) 27.00 (685.8) 3094 (1403.4) 30" (750)
B3151-30Z -- 12 Ga. (2.6) 24" (609.6) 28.00 (711.2) 3208 (1455.1) 30" (750)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 164 Eaton
Pipe Supports, Guides, Shields & Saddles
B3154 - Short Insulation Protection Shield
B3155 - Short Insulation Protection Shield with "Loc" Tabs
Material: Steel (Stainless steel available)
L
Shields & Saddles
Supports, Guides,
Stock Size
B3155
B3155 same dimension as B3154 but with bottom tabs for centering and securing the shield to hanger.
Part Part Stock Size L Shield 'I.D.' Approx.Wt./100 Pipe Hanger Size
No. No. in. (mm) in. (mm) in. (mm) Lbs. (kg) in. (mm)
B3154-1X B3155-1X 18 Ga. (1.2) 8" (203.2) 1.90 (48.2) 36 (16.3) 11/2" (40)
B3154-2X B3155-2X 18 Ga. (1.2) 8" (203.2) 2.38 (60.4) 45 (20.4) 2" (50)
B3154-3X B3155-3X 18 Ga. (1.2) 8" (203.2) 2.88 (73.1) 54 (24.5) 21/2" (65)
B3154-4X B3155-4X 18 Ga. (1.2) 8" (203.2) 3.50 (88.9) 66 (29.9) 3" (80)
B3154-5X B3155-5X 18 Ga. (1.2) 8" (203.2) 4.00 (101.6) 75 (34.0) 31/2" (90)
B3154-6X B3155-6X 18 Ga. (1.2) 8" (203.2) 4.50 (114.3) 84 (38.1) 4" (100)
B3154-7X B3155-7X 18 Ga. (1.2) 8" (203.2) 5.00 (127.0) 93 (42.2) 5" (125)
B3154-8X B3155-8X 18 Ga. (1.2) 8" (203.2) 5.56 (141.2) 105 (47.6) 5" (125)
B3154-9X B3155-9X 18 Ga. (1.2) 8" (203.2) 6.64 (168.6) 126 (57.1) 6" (150)
B3154-10Z B3155-10Z 18 Ga. (1.2) 12" (304.8) 7.64 (194.0) 218 (98.9) 8" (200)
B3154-11Z B3155-11Z 18 Ga. (1.2) 12" (304.8) 8.64 (219.4) 247 (112.0) 8" (200)
B3154-12Z B3155-12Z 18 Ga. (1.2) 12" (304.8) 9.64 (244.8) 273 (123.8) 10" (250)
B3154-13Z B3155-13Z 18 Ga. (1.2) 12" (304.8) 10.76 (273.3) 304 (137.9) 10" (250)
B3154-14Z B3155-14Z 18 Ga. (1.2) 12" (304.8) 11.76 (298.7) 332 (150.6) 12" (300)
B3154-15Z B3155-15Z 18 Ga. (1.2) 12" (304.8) 12.76 (324.1) 360 (163.3) 12" (300)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 165 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
Snap ‘N Shield™ Clevis
Size Range:
2.34" (59.4mm), 3.45" (87.6mm), 4.50" (114.3mm), 5.53" (140.4mm), 6.64" (168.5mm), and 8.64" (219.4mm) Shield Openings
Material: Plastic - Gray Thermylene P6-20FG-0738
u e d
Clevis Shield Inside
n t i n
Approx.
ith
Clevis Note: For Shock Indicator
Built-In
Shock Indicator
c o U Seriesrtridge
Part Opening Wt./100 Hanger
w sizes and information,
Number
BPH250G
BPH350G
in.
2.34”
3.45”
(mm)
(59)
(87)
i s lbs.
D er BP er Ca 8
28.1
40.6
(kg)
(12.7)
(18.4)
Size
B3100-2
B3100-3
contact the Eaton’s B-Line
Engineering Department.
u e d
BPH450 BPH450 1/4” BPH250 BPH250 BPH350 BPH450 BPH550
n
1/2” BPH250 BPH250 BPH350 BPH450 BPH550 3/8”
5/8” BPH250 BPH250 BPH350
t i
n 67 for
BPH450 BPH550 1/2”
BPH250
BPH250
BPH250
BPH250
BPH350
BPH350
BPH450
BPH450
BPH550
BPH550
3/4” BPH250 BPH350
c
BPH350
o BPH450 BPH550 3/4” BPH250 BPH350 BPH350 BPH450 BPH550
D i s page 1 rts
1” BPH250 BPH350 BPH350 BPH450 BPH550 1” BPH250 BPH350 BPH350 BPH450 BPH550
11/4” BPH350 BPH350 BPH350 BPH450 BPH550 11/4” BPH350 BPH350 BPH450 BPH550 BPH650
a
11/2” BPH350 BPH350 BPH450
S e e i n g c h 12”/ ”
BPH550 BPH650 12 BPH350 BPH350 BPH450 BPH550 BPH650
siz
2” BPH350 BPH450 BPH450 BPH550 BPH650 BPH350 BPH450 BPH450 BPH550 BPH650
21/2” BPH450 BPH450 BPH550 BPH650 BPH850
2/” 12 BPH450 BPH450 BPH550 BPH650 BPH850
3” BPH450 BPH550 BPH550 BPH650 BPH850 3” BPH450 BPH550 BPH550 BPH650 BPH850
31/2” BPH550 BPH550 BPH650 BPH850 BPH850 31/2” BPH550 BPH550 BPH650 BPH850 BPH850
4” BPH550 BPH650 BPH650 BPH850 BPH850 4” BPH550 BPH650 BPH650 BPH850 BPH850
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 166 Eaton
Pipe Supports, Guides, Shields & Saddles
BPUxxxG - Universal Snap-N-Shield™
BPH3100 - Universal Snap-N-Shield with Clevis Hanger
BPHUCxG - Universal Shield Cover
• Clevis hanger cartridge has an optional magnetic shock
Shields & Saddles
Supports, Guides,
u e d
Inside Approx. Clevis
21/2”
3”
BPU450
BPU450
BPU450
BPU550
BPU550
BPU550
BPU650
BPU650
BPU850
BPU850
i n with
Number Opening Wt./100 Hanger
n t in. (mm) lbs. (kg) Size 31/2” BPU550 BPU550 BPU650 BPU850 BPU850
c o U Seriesrtridge r
4” BPU550 BPU650 BPU650 BPU850 BPU850
BPH3100-2 2.34” (59) 73.4 (33.3) B3100-2
D i s
BPH3100-3
BPH3100-4
3.45”
4.50”
(87)
(114)
139.5
173.7
(63.3)
(78.8)
B3100-3
B3100-4
P
BPH3100-5 Ca ge
e r B (140)
5.53”
e r C(120.7) H a n g
266.1 B3100-5
Sch.
40/80 Pipe
Insulation Thickness
C l e v B 3 1(168)
BPH3100-8 8.64” 601.7 B3100-8 1/4” BPU250 BPU250 BPU350 BPU450 BPU550
00
(219) (272.9)
BPH3100-10 10.64” 1033.5
(468.8) B3100-10 3/8” BPU250 BPU250 BPU350 BPU450 BPU550
a
and
BPH3100-12 12.64”
(219) 1295.5
(587.6) B3100-12 1/2” BPU250 BPU350 BPU350 BPU450 BPU550
3/4” BPU250 BPU350 BPU350 BPU450 BPU550
1” BPU250 BPU350 BPU350 BPU450 BPU550
11/4” BPU350 BPU350 BPU450 BPU550 BPU650
Universal Shield Covers 11/2” BPU350 BPU350 BPU450 BPU550 BPU650
Part Used With Approx. 2” BPU350 BPU450 BPU450 BPU550 BPU650
Number Universal Shields Wt./100 21/2” BPU450 BPU450 BPU550 BPU650 BPU850
lbs. (kg) 3” BPU550 BPU550 BPU550 BPU850 BPU850
BPHUCLG BPU1050G & BPU1250G 116.7 (52.9) 31/2” BPU550 BPU550 BPU650 BPU850 BPU850
BPHUCSG BPU650G & Smaller 57.2 (25.9) 4” BPU550 BPU650 BPU850 BPU850 BPU850
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 167 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
Universal Snap-N-Shield™ Accessories
D i
BPU1250
BPHUCSG
BPH3100-4
BPU250
BPUANGLMT
Universal Shield Approx.
Accessories Description Wt./100
Part Number lbs. (kg)
BPUSTRUTMTB22B24B26 BPUSTRUTMT4D22
BPUHGRMT BPUSD
BPUSTRUTMTB52B54B56
BPUSTRUTMT4D21
BPU-1050S
BPU-1250S (shown)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 168 Eaton
Pipe Supports, Guides, Shields & Saddles
Snap ‘N Shield™ Pipe Support
Size Range:
21/4" (57.1mm), 31/4" (82.5mm), 41/4" (107.9mm), 51/4" (133.3mm), 61/4" (158.7mm), and 85/8" (219.1mm) Shield Openings
Material: Plastic - Black & White
Shields & Saddles
Supports, Guides,
Features:
• Ideal for horizontal pipe runs.
• Offers maximum protection for insulated pipe.
• Snaps directly onto channel.
• Shield length is 12” (304.8mm).
• Fast, easy installation – no tools required.
• Snap-on design eliminates shield movement, preventing insulation damage that can lead to costly leaks.
• Allows pipe to expand without damaging the insulation.
• Protects insulation from damage caused by rubbing against other pipes and fittings.
• Designed for side-by-side installations.
• The most reliable, durable, and cost-effective way to protect your insulation.
• Patent Pending.
Order By: Part number.
Technical Specifications
Applications: Refrigeration, Air Conditioning, and Plumbing
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 169 B-Line series Pipe Hangers & Supports
Pipe Supports, Guides, Shields & Saddles
Snap’N Shield™ Pipe Support
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 170 Eaton
Seismic Bracing
Seismic Bracing
The TOLCO™ seismic bracing products are the most complete line of bracing components in the industry.
Our offering includes both rigid and cable bracing systems and many components are multi-size adaptable or
universal in application.
The TOLCO brand has a history of over 40 years in seismic bracing of non-structural systems including fire sprinklers,
plumbing, mechanical, HVAC and electrical. In addition to the products shown in this catalog we also offer engineered
solutions for any seismic bracing application.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 171 B-Line series Pipe Hangers & Supports
Seismic Bracing
TOLCO™ Fig. 4A - Pipe Clamp for Sway Bracing Component of State of
California OSHPD Approved
Size Range: 4" (100mm) thru 8" (200mm) pipe. For sizes smaller than Seismic Restraints System
4" (100mm) use B3140.
Material: Steel B
Function: For bracing pipe against sway and seismic disturbance.
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada
(cUL) 4" (100mm) thru 8" (200mm). Included in our Seismic Restraints Catalog
approved by the State of California Office of Statewide Health Planning and
Development (OSHPD). A
Installation Instructions: Fig. 4A is the "braced pipe" attachment component
of a longitudinal, lateral or riser brace assembly. It is intended to be combined D
Seismic Bracing
with the "bracing pipe" and TOLCO transitional and structural attachment
component(s) to form a complete bracing assembly. NFPA 13 and/or OSHPD
guidelines should be followed.
To Install: Place the Fig. 4A over the pipe to be braced. Attach TOLCO C
transitional fitting, either Fig. 980, 910 or 909, to the clamp ears. Tighten bolts
and nuts; torque requirement is a minimum of 50 ft./lbs. (68Nm). HHCS and Hex Nuts Included
Transitional fitting attachment can pivot for adjustment to proper brace angle.
Finish: Plain. Contact customer service for alternative finishes and materials.
Order By: Figure number, pipe size and finish
4A-4 4" (100) 81/2" (215.9) 33/8" (85.7) 311/16" (93.7) 1/2"-13 1600 (7.11) 221 (100.2)
4A-5 5" (125) 93/4" (247.6) 37/8" (98.4) 43/8" (111.1) 1/2"-13 1600 (7.11) 253 (114.7)
4A-6 6" (150) 111/2" (292.1) 5" (127.0) 51/8" (130.2) 1/2"-13 2015 (8.96) 513 (232.7)
4A-8 8" (200) 131/4"(336.5) 611/16" (169.9) 61/8" (155.6) 1/2"-13 2015 (8.96) 601 (272.6)
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 172 Eaton
Seismic Bracing
Component of State of
TOLCO™ Figure 4B Pipe Clamp for Sway Bracing California OSHPD Approved
Seismic Restraints System
Size Range: 3/4” (20mm) to 8” (200mm) pipe
Material: Steel
Function: For bracing pipe against sway and seismic disturbance C
Fig. 4B
Hanger/Longitudinal Brace
Pipe Size Rod Size B C D Bolt Size Design Load Approx. Wt./100
Part No. in. (mm) A in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
4B-3/4 3/4" (20) 3/8"-16 1" (25.4) 27/8" (73.0) 25/8" (66.7) 5/16"-18 330 (1.47) 56 (25.4)
4B-1 1" (25) 3/8"-16 1" (25.4) 31/4" (82.5) 215/16" (74.6) 5/16"-18 330 (1.47) 60 (27.2)
4B-11/4 11/4" (32) 3/8"-16 1" (25.4) 39/16" (90.6) 31/4" (82.5) 5/16"-18 330 (1.47) 74 (33.5)
4B-11/2 11/2" (40) 3/8"-16 1" (25.4) 313/16" (96.8) 37/16" (87.3) 5/16"-18 330 (1.47) 79 (35.8)
4B-2 2" (50) 3/8"-16 11/2" (38.1) 51/8" (130.2) 45/8" (117.5) 5/16"-18 440 (1.78) 156 (70.7)
4B-21/2 21/2" (65) 1/2"-13 13/4" (44.4) 55/8" (142.9) 53/8" (136.5) 3/8"-16 440 (1.78) 176 (79.8)
4B-3 3" (80) 1/2"-13 17/8" (47.6) 63/4" (171.4) 61/8" (155.5) 3/8"-16 660 (2.93) 198 (89.9)
4B-31/2 31/2" (90) 1/2"-13 2" (50.8) 71/4" (184.1) 63/4" (171.4) 3/8"-16 660 (2.93) 219 (99.3)
4B-4 4" (100) 5/8"-11 2" (50.8) 85/8" (219.1) 71/4" (184.1) 1/2"-13 800 (3.56) 288 (130.6)
4B-5 5" (125) 5/8"-11 2" (50.8) 97/8" (250.8) 85/16" (211.1) 5/8"-11 980 (4.36) 390 (176.9)
4B-6 6" (150) 3/4"-10 21/8" (54.0) 1015/16" (277.8) 91/2" (241.3) 5/8"-11 980 (4.36) 448 (203.2)
4B-8 8" (200) 7/8"-9 21/8" (54.0) 137/16" (341.2) 111/2" (292.1) 3/4"-10 1200 (5.34) 691 (313.4)
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 173 B-Line series Pipe Hangers & Supports
Seismic Bracing
TOLCO™ Fig. 4L - Longitudinal “In-Line” Sway Brace Attachment
Size Range: 2" (50mm) through 8" (200mm) IPS.
Material: Steel
Set Screw & Hardware
Function: For bracing pipe against sway and seismic disturbance. Included
Approvals: Underwriters Laboratories Listed in the USA (UL) and
Canada (cUL) 21/2" (65mm) through 8" (200mm) pipe. Approved by Factory Mutual
Engineering (FM), 21/2" (65mm) through 8" (200mm) pipe.
Installation Instructions: Fig. 4L is the "braced pipe" attachment
component of a longitudinal sway brace assembly. It is intended to be D A
combined with the "bracing pipe" and TOLCO structural attachment
component to form a complete bracing assembly. NFPA 13 and/or
Seismic Bracing
OSHPD guidelines should be followed.
To Install: Place the Fig. 4L over the pipe to be braced and tighten
bolts. Then engage "bracing pipe" into jaw opening and tighten set screw
C
until head snaps off. Jaw attachment can pivot for adjustment to proper
brace angle.
Finish: Plain. Contact customer service for alternative finishes and materials.
Order By: Figure number, pipe size and finish.
Longitudinal
Brace
4-Way Riser Brace
(plan view)
4L-21/2 21/2" (65) 67/16" (163.5) 21/2" (63.5) 23/4" (69.8) 1/2"-13 2015 (8.96) 253 (114.7)
4L-3 3" (80) 7" (177.8) 23/4" (69.8) 31/16" (77.8) 1/2"-13 2015 (8.96) 268 (121.5)
4L-4 4" (100) 81/2" (215.9) 33/8" (85.7) 311/16" (93.7) 1/2"-13 2015 (8.96) 348 (157.8)
4L-5 5" (125) 93/4" (247.6) 37/8" (98.4) 43/8" (111.1) 1/2"-13 2015 (8.96) 380 (172.3)
4L-6 6" (150) 111/2" (292.1) 5" (127.0) 51/8" (130.2) 1/2"-13 2015 (8.96) 640 (290.3)
4L-8 8" (200) 131/4" (336.5) 55/8" (142.8) 55/8" (142.8) 1/2"-13 2015 (8.96) 728 (330.2)
Pipe Max. Horizontal Max. Horizontal Design Load (FM) * The loads listed are axial
Part Size Design Load (cULuc) 30-44° 45-59° 60°-74° 75°-90° loads on the brace. The
No. in. (mm) lbs./(kN) lbs./(kN) lbs./(kN lbs./(kN) lbs./(kN) horizontal load capacity, H, of
4L-21/2 21/2" (65) 2015 (8.96) 1030 (4.58) 1180 (5.24) 1420 (6.31) 1590 (7.07) the brace is: H = F x sin ?,
where ? the installation angle
4L-3 3" (80) 2015 (8.96) 1030 (4.58) 1180 (5.24) 1420 (6.31) 1590 (7.07) measured from the vertical.
4L-4 4" (100) 2015 (8.96) 530 (2.36) 730 (3.25) 890 (3.96) 990 (4.40) FM approved when used with
4L-5 5" (125) 2015 (8.96) 530 (2.36) 730 (3.25) 890 (3.96) 990 (4.40) 1", 11⁄4", 11⁄2" or 2" Sch. 40
brace pipe.
4L-6 6" (150) 2015 (8.96) 530 (2.36) 730 (3.25) 890 (3.96) 990 (4.40)
4L-8 8" (200) 2015 (8.96) 490 (2.18) 680 (3.02) 830 (3.69) 930 (4.13)
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 174 Eaton
Seismic Bracing
TOLCO™ Fig. 4LA - Longitudinal “In-Line” Sway Brace Attachment
Size Range: 1" (25mm) through 12" (300mm) IPS.
Material: Steel
Function: For bracing pipe against sway and seismic disturbance.
Approvals: Approved by Factory Mutual Engineering (FM), 1" (25mm)
through 12" (300mm) pipe. Underwriters Laboratories Listed in the USA and
Canada (cULus), 1" (25mm) through 10" (250mm) pipe. See allowable loads in
charts on page 172.
D
Installation Instructions: Fig. 4LA can be used as the system attachment A
component of a longitudinal or lateral brace assembly. It is intended to be
combined with the "bracing member" and TOLCO transitional attachment and C
Seismic Bracing
Pipe Approx.
Part Size A C D Bolt Size Wt./100
No. in. (mm) in. (mm) in. (mm) in. (mm) lbs. (kg)
4LA-1 1" (25) 319/32" (91.2) 15/16" (33.5) 15/16" (33.5) 3/8"-16 119 (54.0)
4LA-11/4 1
1 /4" (32) 329/32" (99.3) 13/8" (35.3) 13/8" (35.3) 3/8"-16 123 (55.8)
4LA-11/2 11/2" (40) 45/32" (105.7) 11/2" (38.5) 11/2" (38.5) 3/8"-16 127 (57.6)
4LA-2 2" (50) 511/32" (135.6) 21/32" (51.9) 21/16" (51.9) 3/8"-16 142 (64.4)
4LA-21/2 21/2" (65) 527/32" (148.7) 25/16" (58.5) 25/16" (58.5) 3/8"-16 173 (78.5)
4LA-3 3" (80) 61/2" (164.9) 25/8" (66.6) 25/8" (66.6) 3/8"-16 187 (84.8)
4LA-4 4" (100) 717/32" (191.3) 31/8" (79.5) 31/8" (79.5) 3/8"-16 209 (94.8)
4LA-6 6" (150) 105/8" (269.9) 49/16" (115.9) 49/16" (115.9) 1/2"-13 521 (236.3)
4LA-8 8" (200) 1213/16" (325.5) 59/16" (143.7) 521/32" (143.7) 1/2"-13 629 (285.3)
4LA-10 10" (250) 161/2" (419.1) 71/4" (184.2) 71/4" (184.2) 1/2"-13 1320 (598.7)
4LA-12 12" (300) 181/2" (469.9) 81/4" (209.6) 81/4" (209.6) 1/2"-13 1496 (678.6)
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 175 B-Line series Pipe Hangers & Supports
Seismic Bracing
TOLCO™ Fig. 4LA - Longitudinal “In-Line” Sway Brace Attachment cont.
Longitudinal Lateral
Brace Brace
Seismic Bracing
Longitudinal Loads Max. Horizontal Design Load (FM) Max. Horizontal
Part Pipe Size 30°-44° 45°-59° 60°-74° 75°-90° Design Load (UL)
No. in. (mm) lbs. (kN) lbs. (kN) lbs. (kN) lbs. (kN) lbs. (kN)
4LA-1 1" (25) 680 (3.02) 970 (4.31) 1190 (5.29) 1320 (5.87) 1000 (4.45)
4LA-11/4 11/4" (32) 680 (3.02) 970 (4.31) 1190 (5.29) 1320 (5.87) 1000 (4.45)
4LA-11/2 11/2" (40) 680 (3.02) 970 (4.31) 1190 (5.29) 1320 (5.87) 1000 (4.45)
4LA-2 2" (50) 680 (3.02) 860 (3.82) 1030 (4.58) 1150 (5.11) 1000 (4.45)
4LA-21/2 1
2 /2" (65) 680 (3.02) 970 (4.31) 1190 (5.29) 1320 (5.87) 1000 (4.45)
4LA-3 3" (80) 680 (3.02) 970 (4.31) 1190 (5.29) 1320 (5.87) 1000 (4.45)
4LA-4 4" (100) 680 (3.02) 970 (4.31) 1190 (5.29) 1320 (5.87) 1000 (4.45)
4LA-6 6" (150) 1620 (7.20) 2,260 (10.05) 2010 (8.94) 2220 (9.87) 1600 (7.11)
4LA-8 8" (200) 1620 (7.20) 1,660 (7.38) 1570 (6.98) 1740 (7.74) 2015 (8.96)
4LA-10 10" (250) 1620 (7.20) 1,660 (7.38) 1570 (6.98) 1740 (7.74) NA (NA)
4LA-12 12" (300) 1620 (7.20) 1,660 (7.38) 1570 (6.98) 1740 (7.74) NA (NA)
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 176 Eaton
Seismic Bracing
TOLCO™ Fig. 800 - Adjustable Sway Brace Attachment to Steel Component of State of
California OSHPD Approved
Size Range: 4" (101.6mm) thru 18" (457.2mm) beam width Seismic Restraints System
Material: Steel
Function: Seismic brace attachment to steel.
Features: This product’s design incorporates a concentric attachment point which is
critical to the performance of structural seismic connections. NFPA 13 indicates the
importance of concentric loading of connections and fasteners. Permits secure
connection to steel where drilling and/or welding of brace connection could present
structural issues.
Installation Instructions: Fig. 800 is the structural attachment component of a
longitudinal or lateral sway brace assembly. It is intended to be combined with a
Seismic Bracing
Fits
Flange Width Range
in. (mm)
4-6 4”-6” (101.6-152.4)
6-8 6”-8” (152.4-203.2)
8-10 8”-10” (203.2-254.0)
10-12 10”-12” (254.0-304.8)
Shown with Fig. 980 Shown with
12-14 12”-14” (304.8-355.6) brace fitting to Fig. 980 brace
14-16 14”-16” (355.6-406.4) pipe brace fitting to pipe brace
16-18 16”-18” (406.4-457.2) (Across Beam) (Along Beam)
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 177 B-Line series Pipe Hangers & Supports
Seismic Bracing
Component of State of
TOLCO™ Fig. 825 - Bar Joist Sway Brace Attachment California OSHPD Approved
Seismic Restraints System
Size Range: One size accommodates all
Fig. 900 Series sway brace attachments. Maximum
Horizontal Design Load 2015 lbs (8.96kN).
Material: Steel
Function: To attach sway bracing and hanger assemblies 3/8"
to steel open web structural members. (9.5)
Features: This product’s design incorporates a concentric
attachment point which is critical to the performance of
structural seismic connections. NFPA 13 indicates the
importance of concentric loading of connections and
Seismic Bracing
fasteners. Permits secure non-friction connection without
drilling or welding. Unique design reinforces point of connection to joist. Break off head
set screw design assures verification of proper installation torque (min. 31 ft.-lbs.). Set Screws &
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Hardware Included
Approved by Factory Mutual Engineering (FM). Included in our Seismic Restraints
Catalog approved by the State of California Office of Statewide Health Planning and
Development (OSHPD). For additional load, spacing and placement information
relating to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems
Guidelines.
Installation Instructions: Fig. 825 is the structural attachment component
of a longitudinal or lateral sway brace assembly. It is intended to be combined
with a TOLCO transitional attachment, "bracing pipe" and a TOLCO "braced pipe"
attachment, to form a complete bracing assembly. NFPA 13 and/or OSHPD guidelines 1”
should be followed. (25.4mm)
Top View 1/2”Bolt & Nut
To Install: Place the Fig. 825 on the steel beam, tighten the cone point set screws Furnished
until heads break off. Attach other TOLCO
transitional attachment fitting, Fig. 909,
910, 980 or 986. Transitional fitting
Max.
attachment can pivot for adjustment to Bar joist shown attached to 6” (152.4mm)
proper brace angle. various roof materials Shown with
Finish: Plain, Electro-Galvanized and HDG Fig. 910
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 178 Eaton
Seismic Bracing
TOLCO™ Fig. 825A - Bar Joist Sway Brace Attachment
Size Range: One size accommodates all Fig. 900 Series sway brace
attachments. Maximum Horizontal Design Load 1600 lbs (7.11kN).
Material: Steel Set Screws &
Hardware Included
Function: To attach sway bracing to steel open web structural members.
3/8"
Features: This product’s design incorporates a concentric attachment
(9.5)
point which is critical to the performance of structural seismic connections.
NFPA 13 indicates the importance of concentric loading of connections
and fasteners. Permits secure non-friction connection without
drilling or welding. Unique design reinforces point of connection to joist.
Break off head bolt design assures verification of proper installation.
Seismic Bracing
Shown with
May pivot in any
Fig. 980
direction
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 179 B-Line series Pipe Hangers & Supports
Seismic Bracing
TOLCO™ Fig. 828 - Universal Sway Brace Attachment
Size Range: One size accommodates all Fig. 900 Series sway brace
attachments. Fits from 3/8” (9.4mm) to 7/8” (22.2mm) thick steel structure. For
thicknesses less than 3/8” (9.4mm) refer to Fig. 825 and Fig. 825A.
Cone Point
Material: Steel Set Screws A
Function: To attach sway bracing to various types of steel structural members.
Features: Permits secure non-friction connection without drilling or welding. Unique
design allows offset placement on wide flange beam, I-beam, C-channel, open web, Set Screws
Included
welded steel trusses, etc.. Secures brace to structure either across or along the
beam. Break-off set screws allow for visual verification of proper installation torque.
Approvals: Underwriters Laboratories Listed in the USA (UL) and
Seismic Bracing
Canada (cUL). Factory Mutual Approved (FM).
Installation Instructions: The Fig. 828 is the structural attachment Cone Point
component of a longitudinal or lateral sway brace assembly. It is intended Set Screw B
to be combined with a TOLCO transitional attachment, "bracing pipe" and a TOLCO
"braced pipe" attachment to form a complete bracing assembly. NFPA 13 and/or UL Horizontal Design Load
OSHPD guidelines should be followed. Maximum Design Load Across Beam
To Install: Place the Fig. 828 on the flange of the beam, truss, or girder. Be sure the 2015 lbs. (8.96kN)
attachment is fully engaged to the rear of the opening. Tighten the cone point Maximum Design Load Along Beam
set screws (A) until the heads break off. Tighten the cone point set screw (B) until the 2015 lbs. (8.96kN)
head breaks off. Remove the flange nut from set screw (B). Install a TOLCO swivel
fitting (Fig, 909, 910, 980, 986). Use flange nut to secure the swivel fitting.
Finish: Plain or Electro-Galvanized
Approx. Weight/100: 275 Lbs. (124.7kg)
Order By: Figure number and finish
Patent #6,098,942, #8,534,625
Canada Patent #2,286,659
Patent Pending
Fig. 828
Max. Horizontal Design Load (FM)
With Brace Parallel To The Beam
Fig. 828
Brace Angle (degrees from vertical) Shown with May pivot in any
Fig. 980 direction
30°-44° 45°-59° 60°-74° 75°-90°
Shown with
690 970 1210 1330 Fig. 980
(3.07kN) (4.31kN) (5.38kN) (5.91kN)
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 180 Eaton
Seismic Bracing
Component of State of
TOLCO™ Fig. 906 - Sway Brace Multi-Fastener Adapter California OSHPD Approved
Seismic Restraints System
Size Range: Use with 1" (25.4mm) and 11⁄4" (31.7mm)
UL listed Fig. 900 Series Earthquake Brace Attachments.
Material: Steel
Application: Allows sway brace fittings to develop greater
load carrying ability by providing multiple fastener H1
attachments. The National Fire Protection (NFPA) provides
information on fastener loads to various structures.
Refer to NFPA 13 (2010) 9.3.5.9.1.
B
Approvals: Underwriters Laboratories Listed in the USA
(UL) and Canada (cUL) only when used with TOLCO
Seismic Bracing
906 12” (305.0) 9” (228.6) 2” (50.8) 1/4” (6.3) Specify Specify 307 (139.3)
Load Note: Actual design load determined by anchor and concrete strength, not to exceed the UL Listed maximum
horizontal load of 2015 lbs. (8.96kN).
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 181 B-Line series Pipe Hangers & Supports
Seismic Bracing
TOLCO™ Fig. 907 - 4-Way Longitudinal Sway Brace Attachment Component of State of
California OSHPD Approved
Seismic Restraints System
Size Range: 1" (25.4mm) x 1" (25.4mm), 1" (25.4mm) x 11⁄4" (31.7mm) and
11⁄4" (25.4mm) x 11⁄4" (25.4mm) bracing pipe.
Material: Steel, hardened cone (or cup) point set screw
A
Function: For bracing pipe against sway and seismic disturbances, Functions
as a longitudinal brace connection when attached to a lateral brace pipe. Bracing
connection must be positioned as close as physically possible to the braced pipe
(No more than 3" (76.2mm) away). Must be used only with TOLCO bracing
components. When used in conjunction with Fig. 1000, this combination bracing
restricts piping movement in tension and compression both laterally and
longitudinally.
Seismic Bracing
Approvals: Included in our Seismic Restraints Catalog approved by the State
of California Office of Statewide Health Planning and Development (OSHPD).
For additional load, spacing and placement information relating to OSHPD
projects, please refer to the TOLCO Seismic Restraint Systems Guidelines.
B Set Screws
Installation Instructions: Fig. 907 is a transitional component of a Included
longitudinal 4-way sway brace assembly. It is intended to be installed with the
longitudinal and lateral "bracing pipes", TOLCO structural attachment fittings,
Fig. 909, 910 and 980 and the Fig. 1000 TOLCO "braced pipe" fitting, to form a
complete bracing assembly.
NFPA 13 and/or OSHPD guidelines should be followed.
To Install: Attach the Fig. 907 over the lateral "bracing pipe" to within 3" (76.2mm)
of its position relative to the "braced pipe" connection. Adjust brace angle and
tighten set screws until the heads bottom out on surface.
Finish: Plain. Contact customer service for alternative finishes and materials.
Order By: Figure number, bracing pipe sizes and finish.
Shown With
Fig. 909
Fig. 907
Shown
With
Fig. 980
Fig. 1000
Part Number Brace Pipe Size A B Max. Design Load Approx. Wt./100
in. (mm) in. (mm) in. (mm) lbs. (kN) lbs. (kg)
907-1 X 1 1” x 1” (25 x 25) 43/4” (120.6) 43/4” (120.6) 655* (2.91) 103 (46.7)
907-1 X 11/4 1” x 11/4” (25 x 32) 53/16” (128.6) 413/16” (122.2) 655* (2.91) 107 (48.5)
907-11/4 X 11/4 11/4” x 11/4” (32 x 32) 53/8” (136.5) 51/4” (133.1) 655* (2.91) 109 (49.4)
* Load will accommodate up to 4” (100mm) pipe at maximum spacing.
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 182 Eaton
Seismic Bracing
Component of State of
TOLCO™ Fig. 909 - No-Thread Swivel Sway Brace Attachment California OSHPD Approved
Seismic Restraints System
Size Range: 1" (25mm) bracing pipe. For brace pipe sizes larger than
1" (25mm), use Fig. 980. Available with holes for 1⁄2”-13 thru 3⁄4”-10 fastener
attachment.
Material: Steel, hardened cone point set screw
Function: The structural component of a sway and seismic bracing system.
Features: This product’s design incorporates a concentric
attachment opening which is critical to the performance of structural
seismic connections. NFPA 13 (2010) 9.3.5.8.4 indicates clearly that
fastener table load values are based only on concentric loading. No
threading of the bracing pipe is required. Open design allows for easy
inspection of pipe engagement.
Seismic Bracing
Application Note: Fig. 909 is used in conjunction with the Fig. 1000, D
Fig. 1001, Fig. 4 (A) or Fig. 4L pipe clamp, and joined together with bracing
pipe. Sway brace assemblies are intended to be installed in accordance with
NFPA 13 (or TOLCO State of California OSHPD Approved Seismic Restraint
Set Screw A
Manual) and the manufacturer’s installation instructions. The required type,
number and size of fasteners used for the structure attachment fitting shall Included B
be in accordance with NFPA 13 and/or OSHPD.
Approvals: Underwriters Laboratories Listed in the USA (UL) Mounting Hardware
and Canada (cUL). Included in our Seismic Restraints Catalog Is Not Included
approved by the State of California Office of Statewide Health
Planning and Development (OSHPD). For additional load, spacing
and placement information relating to OSHPD projects, please refer
to the TOLCO Seismic Restraint Systems Guidelines.
Installation Instructions: Fig. 909 is the structural or transitional
attachment component of a longitudinal or lateral sway brace
assembly. It is intended to be combined with the "bracing pipe"
and TOLCO "braced pipe" attachment, Fig. 1000, 1001, 4A, 4B or 4L to form
a complete bracing assembly. NFPA 13 and/or OSHPD
guidelines should be followed.
To Install: Place the Fig. 909 onto the bracing pipe. Tighten the set screw
until the head bottoms out on surface. Attachment can pivot for adjustment
to proper brace angle.
Finish: Plain. Contact customer service for alternative finishes and materials.
Order By: Figure number, fastener attachment size and finish.
909-1/2 * 17/32” (13.5) 1” (25) 6” (152.4) 15/8” (41.3) 2015 (8.96) 91 (41.3)
909-5/8 11/16” (17.5) 1” (25) 6” (152.4) 15/8” (41.3) 2015 (8.96) 90 (40.8)
909-3/4 13/16” (20.6) 1” (25) 6” (152.4) 15/8” (41.3) 2015 (8.96) 89 (40.4)
* Standard size.
Important! - For load information when using Fig. 909 with pre-installed or post-installed concrete anchors in
compliance with NFPA 13 (2016) or ASCE 7-10, including prying factors, see load tables on pages AL1 thru AL21.
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 183 B-Line series Pipe Hangers & Supports
Seismic Bracing
Component of State of
TOLCO™ Fig. 910 - Swivel Sway Brace Attachment California OSHPD Approved
Seismic Restraints System
Size Range: 1" (25mm) bracing pipe. For brace pipe sizes larger than 1" (25mm),
use Fig. 980. Available with holes for 3⁄8”-16 thru 3⁄4”-10 fastener attachment.
Material: Steel
D
Function: For bracing pipe against sway and seismic disturbances. The A
building attachment component of a sway brace system; the Fig. 910 is used
in conjunction with the Fig. 1001, Fig. 1000 or with a Fig. 4A, Fig. 4L, or B
Fig. 4LA pipe clamp and joined together with a brace pipe per NFPA 13.
Features: This product’s design incorporates a concentric attachment
opening which is critical to the performance of structural seismic connections.
NFPA 13 (2010) 9.3.5.8.4 indicates that fastener table load values are based E
Seismic Bracing
only on concentric loading. Universal swivel design allows Fig. 910 to be C
attached at any surface angle. F
Mounting Hardware
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada Is Not Included
(cUL). Included in our Seismic Restraints Catalog approved by the State of
California Office of Statewide Health Planning and Development (OSHPD,
OPA-0300). For additional load, spacing and placement information relating
to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems
Guidelines.
Installation Instructions: Fig. 910 is a structural or transitional attachment
component of a longitudinal or lateral sway brace assembly. It is intended to
be combined with the "bracing pipe", and TOLCO "braced pipe" attachment,
Fig. 1000, Fig. 1001, Fig. 4A, Fig. 4L or Fig. 4LA to form a complete bracing
assembly. Follow NFPA 13 and/or OSHPD guidelines.
To Install: Thread the pipe into the Fig. 910 until pipe threads are visible
through inspection site hole. Attachment can pivot for adjustment to proper
brace angle.
Note: Fig. 910 swivel attachment and Fig. 1001, Fig. 1000, Fig. 4A Fig. 4L,
or Fig. 4LA pipe clamps make up a sway brace system of (UL) Listed
attachments and bracing materials which satisfies the requirements of
Underwriters Laboratories and the National Fire Protection Association (NFPA).
Finish: Pre-Galvanized. Contact customer service for alternative finishes and
materials.
Order By: Figure number, pipe size, fastener attachment size, and finish.
Lateral Brace
910-1 X 1/2 1” (25) 2” (50.8) 11/2” (38.1) 3” (76.2) 9/16” (14.3) 25/16” (58.7) 2” (50.8) 1600 (8.96) 88 (39.9)
910-1 X 5/8 1” (25) 2” (50.8) 11/2” (38.1) 3” (76.2) 11/16” (17.5) 25/16” (58.7) 2” (50.8) 1600 (8.96) 87 (39.4)
910-1 X 3/4 1” (25) 2” (50.8) 11/2” (38.1) 3” (76.2) 13/16” (20.6) 25/16” (58.7) 2” (50.8) 1600 (8.96) 86 (39.0)
Important! - For load information when using Fig. 910 with pre-installed or post-installed concrete anchors in
compliance with NFPA 13 (2016) or ASCE 7-10, including prying factors, see load tables on pages AL1 thru AL21.
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 184 Eaton
Seismic Bracing
TOLCO™ Fig. 975 - Straight Sway Brace Fitting
Size Range: 1" (25mm) bracing pipe. For brace pipe sizes larger than
1" (25mm), use Fig. 980. Available with holes for 1⁄2”-13 thru 3⁄4”-10 fastener
attachment.
C
Material: Steel Mounting Hardware
Function: For bracing pipe against sway and seismic disturbances. The Is Not Included
building attachment component of a sway brace system; the Fig. 975 is used in
conjunction with the Fig. 1000, Fig. 1001 or with a Fig. 4A pipe clamp and joined
together with a brace pipe per NFPA 13. D
Features: Open design allows for easy checking of thread engagement.
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL).
Seismic Bracing
Lateral Brace
975-1/2 * 1” (25) 4” (101.6) 31/2” (88.9) 11/2” (38.1) 9/16” (14.3) 2015 (8.96) 88 (39.9)
975-5/8 1” (25) 4” (101.6) 31/2” (88.9) 11/2” (38.1) 11/16” (17.5) 2015 (8.96) 87 (39.4)
975-3/4 1” (25) 4” (101.6) 31/2” (88.9) 11/2” (38.1) 13/16” (20.6) 2015 (8.96) 86 (39.0)
* Standard size.
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 185 B-Line series Pipe Hangers & Supports
Seismic Bracing
TOLCO™ Fig. 980 - Universal Swivel Sway Brace Attachment - 3/8”-16 to 3/4”-10 rods
TOLCO™ Fig. 980H - Universal Swivel Sway Brace Attachment - 7/8”-9 to 11/4”-7 rods
Size Range: One size fits bracing pipe 1" (25mm) thru 2" (50mm), Component of State of
12 gauge (2.6mm) channel, and all structural steel up to 1/4" (31.7mm) thick. California OSHPD Approved
Seismic Restraints System
Material: Steel. Stainless Steel Type 316 (SS6) optional.
Function: Multi-functional attachment to structure or braced pipe fitting.
Set Screw
Features: This product’s design incorporates a concentric attachment Included Mounting Hardware
opening which is critical to the performance of structural seismic connections. 980 Is Not Included
NFPA 13 (2010) 9.3.5.8.4 indicates clearly that fastener table load values are D
based only on concentric loading. Mounts to any surface angle. Break off bolt
head assures verification of proper installation.
Seismic Bracing
Installation: Fig.980 is the structural or transitional attachment component A
of a longitudinal or lateral sway brace assembly. It is intended to be combined B
with the "bracing pipe" and TOLCO "braced pipe" attachment, Fig. 1000, 1001,
2002, 4L, 4A or 4B to form a complete bracing assembly. NFPA 13 and/or
OSHPD guidelines should be followed.
To Install: Place the Fig. 980 onto the "bracing pipe". Tighten the set screw
until the head breaks off. Attachment can pivot for adjustment to proper brace
angle.
Approvals: —Underwriters Laboratories Listed in the USA (UL) and
Canada (cUL). Approved by Factory Mutual Engineering (FM). Included in our D
Seismic Restraints Catalog approved by the State of California Office of 980H
Statewide Health Planning and Development (OSHPD). For additional load,
spacing and placement information relating to OSHPD projects, please refer
to the TOLCO Seismic Restraint Systems Guidelines.
A
Note: Fig. 980 Swivel Attachment and Fig. 1001, Fig. 1000, Fig. 2002, B
Fig. 4A, Fig. 4B or Fig. 4L pipe clamps make up a sway brace system of UL
Listed attachments and bracing materials which satisfies the requirements of
Underwriters Laboratories and the National Fire Protection Association (NFPA)
Finish: Plain, Electro-Galvanized or Stainless Steel. Contact customer service
for alternative finishes.
Order By: Figure number and finish.
US Patent Numbers
Pat. #6,273,372, Pat. #6,517,030, Pat. #6,953,174,
Pat. #6,708,930, Pat. #7,191,987, Pat. #7,441,730, Pat. #7,669,806
* Mounting attachment hole size. Important! - For load information when using Fig. 980 with
** Installed with 1” or 11/4” Schedule 40 brace pipe. pre-installed or post-installed concrete anchors in
compliance with NFPA 13 (2016) or ASCE 7-10, including
prying factors, see load tables on pages AL1 thru AL21.
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 186 Eaton
Seismic Bracing
Component of State of
TOLCO™ Fig. 981 - Fast Attach – Universal Swivel Sway Brace Attachment California OSHPD Approved
Seismic Restraints System
Size Range: Fits bracing pipe 1" (25mm) thru 2" (50mm), 12 gauge (2.6mm)
channel and all structural steel up to 1/4" (6.3mm) thick.
Fig. 981-S fits rod sizes 3/8" thru 5/8".
Fig. 981-L fits rod sizes 3/4" thru 7/8". Set Screws
Material: Steel Included
multiple rod sizes; 3/8" thru 5/8" and 3/4" thru 7/8". “Stackable” design allows
installation of both lateral and longitudinal braces to be easily installed on a single
hanger rod, with no disassembly.
Installation: Fig. 981 is the “braced pipe” attachment component of a lateral
or longitudinal brace assembly. It is intended to be combined with the pipe hanger,
all-thread rod, “bracing pipe” and TOLCO transitional and structural attachment
component(s) to form a complete bracing assembly. NFPA 13 and or OSHPD
guidelines should be followed.
To Install: Spin nut on top of hanger counterclockwise to loosen the nut and raise it
above the top of the hanger. Attach Fig. 981 by slipping the open side of the 981
yoke onto the all thread rod above the top of the hanger. Tighten 3/8" cone point set
screw on yoke until head breaks-off to ensure proper installation torque. Spin the hex
nut clockwise and tighten securely. Insert brace pipe into the jaw of the 981 and
tighten the cone point set screw until the head breaks off ensuring proper installation
torque. Pivot brace pipe to proper angle and attach to structure using a TOLCO
swivel structural attachment. Shown with 1"
Approvals: Included in our Seismic Restraint Systems Guidelines, approved by Sch. 40 Pipe Brace
the California Office of Statewide Health Planning and Development (OSHPD).
For additional load, spacing and placement information relating to OSHPD Shown with Fig. 981 - Fast
projects, please refer to the TOLCO Seismic Restraint Systems Guidelines. Attach Universal Swivel Sway
Finish: Electro-Galvanized Brace Attachment
Order By: Figure number, rod size
US Patent Numbers Fig. 200WON Band Hanger
Pat. #6,273,372, Pat. #7,097,141, Pat. #7,654,043, Pat. #7,654,043 B2
981-S 3/8” thru 35/8” 51/8” (130.2) 41/8” (104.8) 11/4” (31.7) 21/4” (57.1) 2015 (8.96) 88 (39.9)
981-L 3/4” & 7/8” 51/8” (130.2) 41/8” (104.8) 11/4” (31.7) 21/4” (57.1) 2015 (8.96) 82 (37.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 187 B-Line series Pipe Hangers & Supports
Seismic Bracing
TOLCO™ Fig. 985 - Mechanical Fast Clamp
Set Screw
Size Range: Fig. 985-S fits rod sizes 3/8” thru 5/8” Included
Fig. 985-L fits rod sizes 3/4” thru 7/8” rod sizes
Material: Steel
Function: Used for attachment of seismic bracing to pipe hanger or trapeze
Features: Allows up to 12” (304.8mm) of adjustability in brace length, when
used with Fig. 986. Break-off set screw heads visually verify required
installation torque. Unique “Fast Attach” yoke design allows Fig. 985 to be
installed to hanger rods 3/8” thru 5/8” or 3/4” thru 7/8”
Finish: Electro-galvanized
Order By: Figure number, rod size & finish
Seismic Bracing
Patent Pending
B
Size Range: Available with holes for 1/2”-13 thru 3/4”-10 fastener attachment.
Mounting Hardware
Material: Steel Is Not Included
Function: Used for attachment of seismic bracing to structure or hanger.
Features: Allows up to 12” (304.8mm) of adjustability in brace length, when
used with Fig. 985. Break-off set screw heads visually verify required
installation torque. Swivel allows adjustment to various surface angles.
Finish: Electro-galvanized
Order By: Figure number, rod size & finish
Patent Pending
Set Screw
Part Rod Hole Dia. Max. Horizontal Approx.
Included
Number Size D Design Load* Wt./100
in. (mm) lbs. (kN) lbs. (kg)
* When used with 15/8” (41.3mm) x 15/8” (41.3mm) 12 Ga. (2.6mm) channel
Max.
Fig. 986
6” (152.4mm)
Structural Attachment
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 188 Eaton
Seismic Bracing
TOLCO™ Fig. BRC CABLE - Pre-Stretched 7 x 19 Galvanized Aircraft Cable
Size Range: Available in cable diameters of 1/8”, 3/16”, and 1/4”
Material: Steel
Function: Used for attachment of seismic bracing to structure or hanger.
Features: Meets requirements of IBC 2009 and ASCE 7-05 for seismic bracing.
Finish: Galvanized
Order By: Figure number and size
Note: Only pre-stretched aircraft cable should be used in seismic bracing
installations where cable is used as the bracing component. Use of other types
of cable will, over time, begin to sag and deform, thus rendering the bracing
Seismic Bracing
Pre-Stretched
Cable
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 189 B-Line series Pipe Hangers & Supports
Seismic Bracing
TOLCO™ Fig. 990 - Cable Sway Brace Attachment - 3/8”-16 to 3/4”-10 rods Component of State of
California OSHPD Approved
TOLCO™ Fig. 990H - Cable Sway Brace Attachment - 7/8”-9 to 11/4”-7 rods Seismic Restraints System
Size Range: — 1⁄8", 3⁄16" and 1⁄4" pre-stretched cable.
Fig. 990 for 3⁄8", 1⁄2", 5⁄8", or 3⁄4" hanger rod, bolt, or fastener.
Hardware Included As shown
Fig. 990H for 7⁄8", 1”, 11⁄8”, or 11⁄4" hanger rod, bolt, or fastener. B
Mounting Hardware Is
Material: — Steel Not Included
Function: — Cable attachment for sway bracing. Attaches sway brace to
structure or to hanger. To be used with 7 x 19 strand core pre-stretched
galvanized aircraft cable.
990
Features: — Cable easily slides into oversized front arch opening.
Breakaway hex nuts assure verification of proper installation. Will mount
to any surface angle.
Seismic Bracing
Approvals: — Included in our Seismic Restraints Catalog approved by the
State of California Office of Statewide Health Planning and Development
(OSHPD). For additional load, spacing and placement information relating
to OSHPD projects, please refer to the TOLCO Seismic Restraint System Guidelines.
Finish: — Electro-Galvanized D
Order By: — Figure number, cable size and mounting hole size.
A
Note: — Order 990H for hanger rod, bolt or fastener holes sized for 7⁄8" (22.2mm)
thru 11⁄4" (31.7mm) rods.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 190 Eaton
Seismic Bracing
Component of State of
TOLCO™ Fig. 991 - Fast Attach – Cable Sway Brace Attachment California OSHPD Approved
Seismic Restraints System
Size Range: 1/8”, 3/16” and 1/4” pre-stretched cable.
Fig. 991S fits rod sizes 3⁄8" thru 5⁄8".
Fig. 991L fits rod sizes 3⁄4" thru 7⁄8". Hardware Included
As Shown
Material: Steel
Function: Cable attachment for sway bracing. Attaches sway brace to hanger rod. To be
used with 7 x 19 strand core pre-stretched galvanized aircraft cable.
Features: Cable easily slides into oversized front arch opening. Swivel allows adjustment
to various surface angles. Break-away hex nuts assure verification of proper installation
torque. Unique “Fast-Attach” yoke design fits multiple rod sizes; 3/8” thru 5/8” or 3/4” thru
7/8”. To verify proper installation to hanger rod, simply install yoke to hanger rod and tighten
Seismic Bracing
3/8” cone point set screw until head breaks off. “Stackable” design allows installation of
both lateral and longitudinal braces, as well as opposing braces, to be easily installed on a
single hanger rod, with no disassembly. The retrofit yoke has a visual verification of proper
installation torque. Tighten existing hex nut down until the slight gap in the yoke assembly
closes completely.
Approvals: Included in our Seismic Restraints Catalog approved by the State of California
Office of Statewide Health Planning and Development (OSHPD). For additional load,
spacing and placement information relating to OSHPD projects, please refer to the TOLCO
Seismic Restraint System Guidelines.
Finish: Electro-Galvanized
Order By: — Figure number, rod size range 3/8" thru 5/8" or 3/4" thru 7/8"
US Patent Numbers: Pat. #7,097,141, Pat. #7,654,043, Pat. #7,654,043 B2
B
Part Rod Cable Max. Horizontal Approx.
Number Sizes Diameter A B Design Load* Wt./100
in. (mm) in. (mm) in. (mm) lbs. (kN) lbs. (kg)
991-S-1/8 3/8”
1/8” (3.2) 45/16” (14.3) 2” (50.8) 975 (4.33) 128.3 (58.2)
991-S-3/16 thru 3/16” (4.8) 5” (127.0) 21/4” (57.1) 2050 (9.12) 182.1 (82.6)
5/8”
991-S-1/4 1/4” (6.3) 5” (127.0) 25/8” (66.7) 3150 (14.01) 221.1 (100.3)
A
Part Rod Cable Max. Horizontal Approx.
Number Sizes Diameter A B Design Load* Wt./100
in. (mm) in. (mm) in. (mm) lbs. (kN) lbs. (kg)
991-L-1/8 3/4”
1/8” (3.2) 45/16” (14.3) 2” (50.8) 975 (4.33) 122.3 (55.5)
991-L-3/16 & 3/16” (4.8) 5” (127.0) 21/4” (57.1) 2050 (9.12) 176.1 (79.9)
7/8”
991-L-1/4 1/4” (6.3) 5” (127.0) 25/8” (66.7) 3150 (14.01) 215.1 (97.5)
* Maximum load rating controlled by cable breaking strength.
Note:
See Page 185 For
Pre-Stretched
Cable Information
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 191 B-Line series Pipe Hangers & Supports
Seismic Bracing
Component of State of
TOLCO™ Fig. 1000 - “Fast Clamp” Sway Brace Attachment California OSHPD Approved
Size Range: Pipe size to be braced: 1" (25mm) thru 6" (150mm) Schedule 10 Seismic Restraints System
thru 40 IPS.
Pipe size used for bracing: 1" (25mm) and 11⁄4" (32mm) Schedule 40 IPS.
Material: Steel
Function: A restraint device intended for lateral bracing.
Features: Field adjustable, making critical pre-engineering of bracing pipe unnecessary. Hardware
Unique design requires no threading of bracing pipe. Can be used as a component of a Included
4-way riser brace. Can be used as longitudinal brace with Fig. 907. Steel leaf spring insert
provided to assure installer and inspector necessary minimum torque has been achieved.
Installation: Fig. 1000 is the "braced pipe" attachment component of a lateral sway
brace assembly. It is intended to be combined with the "bracing pipe" and TOLCO
Seismic Bracing
structural attachment component, Fig. 980, 910 or 909 to form a complete bracing
assembly. Follow NFPA 13 and/or OSHPD guidelines.
To Install: Place the Fig. 1000 over the pipe to be braced, insert bracing pipe through
opening leaving a minimum of 1" extension. Brace pipe can be installed on top or bottom
of pipe to be braced. Tighten hex nuts until leaf spring is flat. It is recommended that the
brace angle be adjusted before hex nuts are fully tightened.
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Approved UL Listed Design Load
for use with Allied Dyna Flow sprinkler pipe up to 2" as a restraint device. Maximum 1” (25mm) thru 2” (50mm) pipe size - 655
horizontal design load is 655 lbs. (2.91kN) Torque requirement is 6-8 ft./lbs. (8-10Nm) lbs. (2.91kN)
Approved by Factory Mutual Engineering (FM). Included in our Seismic Restraints Catalog
approved by the State of California Office of Statewide Health Planning and Development
(OSHPD). For additional load, spacing and placement information relating to OSHPD
projects, please refer to the TOLCO Seismic Restraint Systems Guidelines.
Application Note: Position Fast Clamp and tighten two hex nuts until leaf spring flattens.
A minimum of 1" pipe extension beyond the Fig. 1000 is recommended.
Finish: Plain. Contact customer service for alternative finishes and materials.
Order By: Order first by pipe size to be braced, followed by pipe
size used for bracing, figure number and finish. Lateral Brace
Pipe Part Number & Approx. Wt./100 Max. Horizontal Design Load (FM) 1, 2
Size 1” (24mm) Brace Pipe 11/4” (32mm) Brace Pipe 30°-44° 45°-59° 60°-74° 75°-90°
in. (mm) Lbs. (kg) Lbs. (kg) Lbs. (kN) Lbs. (kN) Lbs. (kN) Lbs. (kN)
1” (25) 1000-1 X 1 71.6 (32.5) 1000-1 X 11/4 75.8 (34.4) 200 (0.89) 280 (1.24) 340 (1.51) 380 (1.69)
11/4” (32) 1000-11/4 X 1 74.8 (33.9) 1000-11/4 X 11/4 79.1 (35.9) 200 (0.89) 280 (1.24) 340 (1.51) 380 (1.69)
11/2” (40) 1000-11/2 X 1 77.8 (35.3) 1000-11/2 X 11/4 82.1 (37.2) 200 (0.89) 280 (1.24) 340 (1.51) 380 (1.69)
2” (50) 1000-2 X 1 84.1 (38.1) 1000-2 X 11/4 88.4 (40.1) 200 (0.89) 280 (1.24) 340 (1.51) 380 (1.69)
21/2” (65) 1000-21/2 X 1 90.2 (40.9) 1000-21/2 X 11/4 94.6 (42.9) 200 (0.89) 280 (1.24) 340 (1.51) 380 (1.69)
3” (80) 1000-3 X 1 97.3 (44.1) 1000-3 X 11/4 101.7 (46.1) 230 (1.02) 320 (1.42) 400 (1.78) 450 (2.00)
31/2” (90) 1000-31/2 X 1 104.0 (47.2) 1000-31/2 X 11/4 108.4 (49.2) 230 (1.02) 320 (1.42) 400 (1.78) 450 (2.00)
4” (100) 1000-4 X 1 110.3 (50.0) 1000-4 X 11/4 114.6 (52.0) 230 (1.02) 320 (1.42) 400 (1.78) 450 (2.00)
5” (125) 1000-5 X 1 123.1 (55.8) 1000-5 X 11/4 127.4 (57.8) -- -- -- -- -- -- -- --
6” (150) 1000-6 X 1 136.5 (61.9) 1000-6 X 11/4 140.8 (63.8) -- -- -- -- -- -- -- --
1 FM Approved when used with 1, 11/4, 11/2, or 2 inch NPS Schedule 40 GB/T 3091,EN 10255H, or JIS G3451 steel pipe as the brace member.
2 Load rating for LW above refers to FM Approved Lightwall Pipe commonly referred to as “Schedule 7”. These ratings may also be applied when EN 10220
and GB/T 8163 steel pipe.
3 Load rating for Schedule 10 above may be applied to GB/T 3092,EN 10255M and H, or JIS G3454, FM Approved Thinwall, or Schedule 40 steel pipes.
Note: See UL load ratings in UL Listed Design Load chart shown under drawing.
Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 192 Eaton
Seismic Bracing
Component of State of
TOLCO™ Fig. 1001 - Sway Brace Attachment California OSHPD Approved
Seismic Restraints System
Size Range: Pipe size to be braced: 1" (25mm) thru 8" (200mm) IPS.
* Pipe size used for bracing: 1" (25mm) and 11⁄4" (32mm) Schedule 40 IPS.
Material: Steel
Function: For bracing pipe against sway and seismic disturbance.
The pipe attachment component of a sway brace system:
Fig. 1001 is used in conjunction with a Fig. 900 Series fitting and joined together
with bracing pipe per NFPA 13, forming a complete sway brace assembly.
Features: Can be used to brace schedules 7 through 40 IPS. Field adjustable,
making critical pre-engineering of bracing pipe length unnecessary. Unique design
requires no threading of bracing pipe. Can be used as a component of a four-way
riser brace. Comes assembled and ready for installation. Fig. 1001 has built-in
Seismic Bracing
visual verification of correct installation. See installation note below. Set Screws
Included
Installation Note: Position Fig. 1001 over the pipe to be braced and tighten
two hex head cone point set screws until heads bottom out. A minimum of
1" (25mm) pipe extension is recommended. Brace pipe can be installed on top or Pipe Max. Horizontal Design Load (UL) - Lbs.
bottom of pipe to be braced.
Size For Brace Pipe Size 1” / 11/4”
Approvals: Underwriters Laboratories Listed in the USA and Canada (cULus). Sch. 7 Sch. 10 Sch. 40
Approved by Factory Mutual Engineering (FM). Included in our Seismic Restraints in. (mm) 1” / 11/4” 1” / 11/4” 1” / 11/4”
Catalog approved by the State of California Office of Statewide Health Planning
and Development (OSHPD). For additional load, spacing and placement 1” (25) -- / -- 1000 / 1000 1000 / 1000
information relating to OSHPD projects, please refer to the TOLCO Seismic 11/4” (32) 1000 / 1000 1000 / 1000 1000 / 1000
Restraint Systems Guidelines, OPA-0300-10. 11/2” (40) 1000 / 1000 1500 / 1500 1500 / 1500
Finish: Plain or Electro-Galvanized. Contact customer service for alternative 2” (50) 1000 / 1000 2015 / 2015 2015 / 2015
finishes and materials.
21/2” (65) 1600 / 1600 2015 / 2765 2015 / 2765
Order By: Indicate pipe size to be braced followed by pipe size used for bracing,
figure number and finish. 3” (80) 1600 / 1600 2015 / 2765 2015 / 2765
Important Note: Fig. 1001 is precision manufactured to perform its function as 4” (100) 1600 / 1600 2015 / 2765 2015 / 2765
a critical component of a complete bracing assembly. To ensure performance, the 6” (150) 1600 / 1600 2015 / 2765 2015 / 2765
UL Listing requires that Fig. 1001 must be used only with other TOLCO bracing 8” (200) 1600 / 1600 2015 / 2765 2015 / 2765
products.
Part Number & Approx. Wt./100 Max. Horizontal Design Load (FM)
Pipe For Sch. 7, Sch. 10, & Sch. 40 Pipe 1, 2, 3
Size 1” (24mm) Brace Pipe 11/4” (32mm) Brace Pipe 30°-44° 45°-59° 60°-74° 75°-90°
in. (mm) Lbs. (kg) Lbs. (kg) Lbs. (kN) Lbs. (kN) Lbs. (kN) Lbs. (kN)
1” (25) 1001-1 X 1 100.0 (45.3) 1001-1 X 11/4 118.0 (53.5) 1800 (8.00) 2550 (11.34) 3120 (13.88) 3490 (25.52)
11/4” (32) 1001-11/4 X 1 100.0 (45.3) 1001-11/4 X 11/4 114.0 (51,7) 1230 (5.47) 1740 (7.74) 2140 (9.52) 2380 (10.58)
11/2” (40) 1001-11/2 X 1 100.0 (45.3) 1001-11/2 X 11/4 115.0 (52.1) 1230 (5.47) 1740 (7.74) 2140 (9.52) 2380 (10.58)
2” (50) 1001-2 X 1 108.0 (49.0) 1001-2 X 11/4 121.0 (54.9) 1230 (5.47) 1740 (7.74) 2140 (9.52) 2380 (10.58)
21/2” (65) 1001-21/2 X 1 138.6 (62.8) 1001-21/2 X 11/4 160.4 (72.7) 800 (3.56) 1130 (5.02) 1380 (6.14) 1540 (6.85)
3” (80) 1001-3 X 1 147.2 (66.7) 1001-3 X 11/4 168.7 (76,5) 850 (3.78) 1200 (5.34) 1470 (6.54) 1640 (7.29)
4” (100) 1001-4 X 1 160.9 (73.0) 1001-4 X 11/4 182.4 (82.7) 850 (3.78) 1200 (5.34) 1470 (6.54) 1640 (7.29)
6” (150) 1001-6 X 1 190.0 (86.2) 1001-6 X 11/4 211.4 (95.9) 510 (2.27) 730 (3.25) 890 (3.96) 990 (4.40)
8” (200) 1001-8 X 1 217.4 (98.6) 1001-8 X 11/4 238.8 (108.3) 510 (2.27) 730 (3.25) 890 (3.96) 990 (4.40)
1 FM Approved when used with 1 or 11/4 inch NPS Schedule 40 GB/T 3091,EN 10255H, or JIS G3451 steel pipe as the brace member.
2 Load rating for LW above refers to FM Approved Lightwall Pipe commonly referred to as “Schedule 7”. These ratings may
also be applied when EN 10220 and GB/T 8163 steel pipe.
3 Load rating for Schedule 10 above may be applied to GB/T 3092,EN 10255M and H, or JIS G3454, FM Approved Thinwall,
or Schedule 40 steel pipes.
Note: See UL load ratings in UL Listed Design Load chart shown under drawing.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 193 B-Line series Pipe Hangers & Supports
Seismic Bracing
Component of State of
TOLCO™ Fig. 2002 - Sway Brace Attachment California OSHPD Approved
Seismic Restraints System
Size Range: Pipe size to be braced: 21⁄2" (65mm) thru 8" (200mm) all
steel schedules, copper, plastic, FRP, cast iron and ductile iron.
Consult factory when bracing other than steel. The Fig. 2002
accepts brace pipes sizes 11⁄2" (40mm) and 2" (50mm) steel schedule 10
through schedule 40.
Material: Steel
Function: For bracing pipe against sway and seismic disturbance.
The pipe attachment component of a sway brace system:
Fig. 2002 is used in conjunction with a TOLCO 900 Series sway brace
attachments and joined together with bracing pipe. Install per NFPA 13
and/or TOLCO State of California OSHPD Approved Seismic Restrain Manual.
Seismic Bracing
Features: Unique design will not damage thin wall, plastic, Hardware
copper or ductile iron pipe. Easy verification of proper installation Included
by tightening bolts until ears touch.
Installation: Place Fig. 2002 over pipe to be braced. Slide
bracing pipe through attachment and tighten hex nuts until ears UL Listed Design Load
touch. 2015 lbs. (8.96kN)
Approvals: Underwriters Laboratories Listed in the USA (UL) and
Canada (cUL). Included in our Seismic Restraints Catalog approved
by the State of California Office of Statewide Health Planning and
Development (OSHPD). For additional load, spacing and placement
information relating to OSHPD projects, please refer to the TOLCO
Seismic Restraint Systems Guidelines.
Finish: Plain. Contact customer service for alternative finishes and materials. Shown with
Fig. 980
Order By: Figure number, pipe size to be braced, pipe size
used for bracing (11⁄2" (40mm) or 2" (50mm)) and finish.
Important Note: Fig. 2002 is precision manufactured
to perform its function as a critical component of a complete
bracing assembly. To ensure performance, the UL Listing
requires that the Fig. 2002 must be used only with other
TOLCO bracing products. 1” (25.4mm)
Min.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 194 Eaton
Concrete Inserts
Concrete Inserts
Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors.
A range of inserts with varying design loads are available.
Materials
Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are
available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-
Galvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating,
DURA GREEN™ and other special coatings are available upon request.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 195 B-Line series Pipe Hangers & Supports
Concrete Inserts
B3019 - Adjustable Metal Deck Ceiling Bolt
B
Size Range: 3/8"-16 thru 3/4"-10 rod D
Material: Steel
D
Function: For use in metal deck formed concrete to attach Steel Size Underside of anchor bolt
hanger rods. Allows for pre-positioning of hanger rods in poured to bottom of plate
concrete decks.
Thread Size 'A' with
Finish: Plate: Plain Steel. Rod: Electro-Galvanized. Contact
Thread Length 'C'
Cooper B-Line for alternative finishes and materials.
Order By: Part number and finish. Contact customer service for
custom rod lengths.
Concrete Inserts
Thread Thread Approx.
Size A B Length C D Steel Size Design Load Wt./100
Part No. in. (mm) in. (mm) in. (mm) in. (mm) Lbs (kN) Lbs. (kg)
B3019-3/8 3/8"-16 21/2" (63.5) 63/8" (161.9) 11/4" (31.7) 7 Ga. x 11/4" x 10" (4.5 x 31.7 x 254.0) 730 (3.25) 80 (36.3)
B3019-1/2 1/2"-13 21/2" (63.5) 61/2" (165.1) 11/4" (31.7) 7 Ga. x 11/4" x 10" (4.5 x 31.7 x 254.0) 1350 (6.00) 99 (44.9)
B3019-5/8 5/8"-11 21/2" (63.5) 63/4" (171.4) 11/4" (31.7) 7 Ga. x 11/4" x 10" (4.5 x 31.7 x 254.0) 2160 (9.61) 129 (58.5)
B3019-3/4 3/4"-10 21/2" (63.5) 63/16" (157.2) 21/4" (57.1) 1/4" x 3" x 10" (6.3 x 76.2 x 254.0) 3230 (14.37) 238 (107.9)
B2499-5/8 5/8"-11 3" (76.2) 31/2" (88.9) 1810 (8.05) 118.0 (53.5)
B2499-3/4 3/4"-10 3" (76.2) 31/2" (88.9) 2710 (12.05) 154.0 (69.8)
B2499-7/8 7/8"-9 3" (76.2) 4" (101.6) 3770 (16.77) 210.0 (95.3)
B2499-1 1"-8 3" (76.2) 4" (101.6) 4960 (22.06) 276.0 (125.2)
Consult factory for specifications on rod sizes 11/8"-7, 11/4"-6, and 11/2"-6
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 196 Eaton
Concrete Inserts
TOLCO™ Fig. 109A - Concrete Deck Insert - Hanger Application Component of State of
California OSHPD Approved
Size Range: 3/8"-16 thru 7/8"-9 rod Seismic Restraints System
Material: Steel
109A-3/8
Function: For use in metal deck formed concrete to attach hanger 109A-1/2
rods. Allows for pre-positioning of hanger rods in poured concrete
decks.
Approvals: 3/8" - 5/8" rod size is Underwriters Laboratories listed in
the USA (UL) and Canada (cUL). Included in our Seismic Restraints
Catalog approved by the State of California Office of Statewide Health
Planning and Development (OSHPD). For additional load, spacing and
placement information relating to OSHPD projects, please refer to the
TOLCO Seismic Restraints Systems Guidelines.
Finish: Plate: Plain Steel. Rod: Electro-Galvanized. Contact customer
service for alternative finishes and materials.
Standard Bolt
Order By: Part number, rod size and finish. Contact customer service Length
for custom rod lengths. 8” (203.2mm)
25/8”
Concrete Inserts
(66.7mm) 1” (25.4mm)
Minimum
1î
Fig. 109A
Edge of Concrete
Edge of Concrete
1” (25.4mm)
Minimum Fig. 109A
Fig. 109A Fig. 109A
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 197 B-Line series Pipe Hangers & Supports
Concrete Inserts
B2501 - Light Duty Spot Insert - Hanger Application
Anchor Bolt
Concrete Inserts
ASTM A307
Rod Coupling
B2501 - Data
UL Listed Approx. Wt./C
Part No. Rod Size Lbs. (kg)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 198 Eaton
Concrete Inserts
B2500 - Light Duty Spot Insert
Material: Steel 2"
1 (50.8) 31/4"
Function: Designed to be embedded in concrete to attach /4"-20 to
7 (82.5)
/8"-9 hanger rods.
How to Install: Attach concrete insert to forms and install reinforcing
rods as required. After forms are dismantled, the knockout can be
removed from the insert. The N2500 insert nut can be installed and
19/16"
the rod fastened to the nut. The rod should touch the inside top of (39.7)
the insert but should not be forced further to avoid damaging the
insert. 11/2"
(38.1)
Approvals: Underwriters Laboratories Listed for maximum pipe Hanger Rod and
size 6" (150). Conforms to Federal Specification WW-H-171E & Nut Not Included
A-A-1192A, Type 19 and Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58, Type 18. Material Thickness
12 Gauge (2.6)
Weight: Approx. Wt./100 - 46 Lbs. (20.8kg)
Finish: Electro-Galvanized.
Order By: Part number and finish.
(Order N2500 nuts separately).
Concrete Inserts
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 199 B-Line series Pipe Hangers & Supports
Concrete Inserts
B3014 - Malleable Iron Insert 2"
(50.8)
Material: Malleable Iron 33/8"
(85.7)
Function: Designed to be embedded in concrete to attach 3/8"-16 to
7/8"-9 hanger rods.
How to Install: Attach concrete insert to forms and install reinforcing 13/16"
rods as required. After forms are dismantled, the B3014N nut can be (20.6)
installed and the rod fastened to the nut. The rod should touch the 21/4"
inside top of the insert. (57.1)
Concrete Inserts
nut below.
Note: Before installation ensure that concrete is sufficient to
carry the load.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 200 Eaton
Concrete Inserts
B2505 thru B2508 - Spot Insert
Material: Steel (Stainless steel available on B2505 only)
Standard Finish: Plain or Pre-Galvanized
Function: Designed to be embedded in concrete to attach 1/4"-20 to
7/8"-9 hanger rods.
How to Install: Attach concrete insert to forms and install reinforcing End Caps
rods as required. After forms are dismantled, the channel nut can be Channel
installed and the rod fastened to the nut. The rod should touch the Size
inside top of the insert.
Approvals: Underwriters Laboratories Listed. Conforms to
Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58,
Type 18.
Order By: Part number and finish. When supporting 25/8"
(66.7)
10" (254mm) pipe, order B2505 Insert with 5/8"-11 channel nuts.
51/16"
Note: For appropriate channel nut selection, see page 17. Before (128.6)
installation ensure that concrete is sufficient to carry the load.
Concrete Inserts
Styrofoam Filled
B2506 shown
Channel End Cap Design Load Max. Pipe Size Approx. Wt./100
Part No. Size Part No. Lbs. (kN) in. (mm) Lbs. (kg)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 201 B-Line series Pipe Hangers & Supports
Concrete Inserts
B2503 - Heavy Duty Spot Insert
Material: Steel
Standard Finish: Electro-Galvanized
Function: Designed to be embedded in concrete where heavy loads
are required in curtain wall applications. Styrofoam end caps prevent
concrete seepage into the channel.
How to Install: Attach concrete insert to forms and install reinforcing
rods as required. After forms are dismantled, the channel nut can be
installed and the rod fastened to the nut. The rod should touch the
inside top of the insert.
Approvals: Conforms to Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58, Type 18.
Design Load: 5000 Lbs. (22.2kN).
Loading based on two N225 channel nuts spaced 3” (76.2mm) on
center and a minimum of 2” (50.8mm) from the end of the insert.
Weight: Approx. Wt./100 - 42 Lbs. (19.0kg)
Order By: Part number and finish. Channel nuts are sold
Concrete Inserts
separately, see page 17 for appropriate selection.
2"
5/32" (4.0) (50.8)
Dia. Nail Holes
8"
(203.2)
51/2"
(139.7)
12" 15/8"
(304.8) (41.3)
Styrofoam
End Caps 15/8"
(41.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 202 Eaton
Concrete Inserts
B22I - Continuous Concrete Insert 25/8" 15/8"
(66.7)
(41.3)
Material: Steel
Standard Finish: Plain, Pre-Galvanized, or Hot-Dip Galvanized
Function: Concrete insert should be secured to forms on
16” (406.4mm) to 24” (609.6mm) intervals. 15/8"
(41.3)
How to Install: Attach concrete insert to forms and install
B3322 Styrofoam
reinforcing rods as required. After forms are dismantled, the Filler
channel nut can be installed and the rod fastened to the nut. End Cap
The rod should touch the inside top of the insert. B22-I-3 thru B22-I-8
Design Load: 2000 Lbs. (8.89kN) per foot for B22-I-12 thru 15/8"
11/2"
B22-I-240 in 3000 psi concrete. Loads concentrated within the (41.3)
(38.1)
last 2” (50.8mm) of inserts 8” (203.2mm) and longer should not 3/4"
exceed 1000 Lbs. (4.45kN). (19.0)
Order By: Part number and finish. Channel nuts are sold
separately, see page 17 for appropriate selection. .188” (4.8) Knockouts
To order inserts without styrofoam and end caps add insert for Nailing Inserts
Concrete Inserts
31/8" 11/16"
only to the part number. To Forms
(79.4)
(17.4)
15/8"
(41.3)
B22-I-12 thru B22-I-240
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 203 B-Line series Pipe Hangers & Supports
Concrete Inserts
B32I - Continuous Concrete Insert 25/8"
(66.7) 15/8"
(41.3)
Material: Steel
Standard Finish: Plain, Pre-Galvanized, or Hot-Dip Galvanized
Function: Concrete insert should be secured to forms on
16” (406.4mm) to 24” (609.6mm) intervals. 13/8"
(34.9)
How to Install: Attach concrete insert to forms and install
B3332 Styrofoam
reinforcing rods as required. After forms are dismantled, the End Cap Filler
channel nut can be installed and the rod fastened to the nut.
The rod should touch the inside top of the insert. B32-I-3 thru B32-I-8
Approvals: Conforms to Manufacturers Standardization
4"
Society ANSI/MSS SP-69 & SP-58, Type 18. (101.6)
Design Load: 2000 Lbs. (8.89kN) per foot for B32-I-12 thru
15/8"
B32-I-240 in 3000 psi concrete. Loads concentrated within the 11/2"
(41.3)
(38.1)
last 2” (50.8mm) of inserts 8” (203.2mm) and longer should not
3/4"
exceed 1000 Lbs. (4.45kN).
(19.0)
Order By: Part number and finish. Channel nuts are sold
separately, see page 17 for appropriate selection. .188” (4.8) Knockouts
for Nailing Inserts
Concrete Inserts
To order inserts without styrofoam and end caps add insert only
27/8" To Forms
to the part number. 11/16"
(73.03)
(17.4)
13/8"
(34.9)
B32-I-12 thru B32-I-240
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 204 Eaton
Concrete Inserts
29/16"
B52I - Continuous Concrete Insert (65.1)
15/8"
(41.3)
Material: Steel
Standard Finish: Plain, Pre-Galvanized, or Hot-Dip Galvanized
Function: Concrete insert should be secured to forms on
16” (406.4mm) to 24” (609.6mm) intervals. 13/16"
(20.6)
How to Install: Attach concrete insert to forms and install
B3352 Styrofoam
reinforcing rods as required. After forms are dismantled, the End Cap Filler
channel nut can be installed and the rod fastened to the nut.
B52-I-3 thru B52-I-8
The rod should touch the inside top of the insert.
Approvals: Conforms to Manufacturers Standardization
4"
Society ANSI/MSS SP-69 & SP-58, Type 18. (101.6)
Design Load: 1500 Lbs. (6.67kN) per foot for B52-I-12 thru
15/8"
B52-I-240 in 3000 psi concrete. Loads concentrated within the 11/2"
(41.3)
last 2” (50.8mm) of inserts 8” (203.2mm) and longer should not (38.1)
3/4"
exceed 750 Lbs. (3.33kN).
(19.0)
Order By: Part number and finish. Channel nuts are sold
separately, see page 17 for appropriate selection. .188” (4.8) Knockouts
for Nailing Inserts
To order inserts without styrofoam and end caps add insert only
Concrete Inserts
To Forms
to the part number. 25/16" 11/16"
(58.7) (17.4)
Styrofoam
Length Approx. Wt./100 Filler
Part No. in. (mm) Lbs. (kg)
Material:
B52-I-12 12” (305) 157 (71.2) 12 Gauge (2.6)
B52-I-16 16” (406) 202 (91.6)
B52-I-20 20” (508) 237 (107.5)
B52-I-24 24” (609) 282 (127.9)
B220
B52-I-32 32” (813) 373 (169.2) End Cap
B52-I-36 36” (914) 419 (190.0)
B52-I-40 40” (1016) 464 (210.4)
B52-I-48 48” (1219) 556 (252.2)
B52-I-60 60” (1524) 692 (313.9)
B52-I-72 72” (1829) 829 (376.0)
B52-I-84 84” (2133) 965 (437.7)
B52-I-96 96” (2438) 1107 (502.1)
B52-I-108 108” (2743) 1237 (561.1)
B52-I-120 120” (3048) 1374 (623.2)
B52-I-144 144” (3657) 1648 (747.5)
B52-I-168 168” (4267) 1922 (871.8)
B52-I-192 192” (4877) 2196 (996.1)
B52-I-216 216” (5486) 2470 (1120.4)
B52-I-240 240” (6096) 2744 (1244.6)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 205 B-Line series Pipe Hangers & Supports
Concrete Inserts
BD40 - Pipe Sleeve Fastener
Material: Steel
Function: Designed to attach pipe sleeves to wall or
floor forms before concrete pours.
Standard Finish: Zinc Phosphate
Order By: Part number and finish.
Concrete Inserts
Approx. Wt./100
Part No. Sleeve Diameter Wall Thickness Lbs. (kg)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 206 Eaton
Brackets
Brackets
Brackets offered in this section are designed for support of pipe or hanger rod attachments. Brackets offer a convenient
means of supporting pipe from a vertical surface.
Materials
Carbon Steel material is mig-welded into bracket assemblies. Stainless Steel and other materials are
available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-
Galvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating,
DURA GREEN™ and other special coatings are available upon request.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 207 B-Line series Pipe Hangers & Supports
Brackets
B3068 - Light Duty Welded Bracket
Material: Steel
Function: Recommended for suspending pipe outward from
mounting surface.
Approvals: Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 32 and Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58, Type 31.
Finish: Plain or Electro-Galvanized. Contact customer service for
alternative finishes and materials.
Order By: Part number, hole size ‘H’, and finish H
B
11/2"
(38.1)
C
H Dia.
Specify
A
9
/16" Dia.
(14.3)
2 Holes
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 208 Eaton
Brackets
B3064 - Adjustable Strut Bracket
Material: Steel
Function: Designed for supporting pipe from walls or
structures where lateral adjustment is required.
Standard Finish: Plain or Electro-Galvanized
Order By: Part number and finish. 3
11/4" /8" Dia.
(31.7) (9.5)
9
/16" Dia. (14.3)
2 Holes
A 45o
2"
(50.8)
11/4"
(31.7)
Brackets
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 209 B-Line series Pipe Hangers & Supports
Brackets
B3065 - Welded Bracket - Light Duty
Max. Recommended Load: 750 lbs. (3.33kN)
Material: Steel
Function: Recommended for supporting pipe on top or
hanging through support bracket outward from mounting
surface.
Approvals: Conforms to Federal Specification WW-H-171E
B
& A-A-1192A, Type 32 and Manufacturers Standardization
Society ANSI/MSS SP-69 & SP-58, Type 31.
Finish: Plain or Electro-Galvanized.
Note: Available in Electro-Galvanized and HDG finish 1"
or Stainless Steel materials. C
(25.4)
H
2 Holes
Brackets
Mtg. Hole H A B C
Part No. in. (mm) in. (mm) in. (mm) in. (mm)
B3065-1 9/16" (14.3) 13" (330.2) 9" (228.6) 111/2" (292.1)
B3065-2 9/16" (14.3) 17" (431.8) 13" (330.2) 151/2" (393.7)
B3065-3 9/16" (14.3) 23" (584.2) 19" (482.6) 211/2" (546.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 210 Eaton
Brackets
Figure B3066 - Welded Bracket - Medium Duty
Max. Recommended Load: 1500 lbs. (6.67kN)
Material: Steel
Function: Recommended for supporting pipe on top or
hanging through support bracket outward from mounting
surface.
Approvals: Conforms to Federal Specification WW-H-171E
& A-A-1192A, Type 33 and Manufacturers Standardization B
Society ANSI/MSS SP-69 & SP-58, Type 32.
Finish: Plain or Electro-Galvanized. Contact customer
service for alternative finishes and materials.
Order By: Part number and finish 1"
C (25.4)
H
2 Holes
Brackets
Mtg. Hole H A B C
Part No. in. (mm) in. (mm) in. (mm) in. (mm)
B3066-0 13/16" (20.6) 18" (457.2) 12" (304.8) 151/2" (393.7)
B3066-1 13/16" (20.6) 24" (609.6) 18" (457.2) 211/2" (546.1)
B3066-2 13/16" (20.6) 30" (762.0) 24" (609.6) 271/2" (698.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 211 B-Line series Pipe Hangers & Supports
Brackets
B3067 - Welded Bracket - Heavy Duty
Max. Recommended Load: 3000 lbs. (13.34kN)
Material: Steel
Function: Recommended for supporting pipe on top or
hanging through support bracket outward from mounting
surface.
Approvals: Conforms to Federal Specification WW-H-171E
& A-A-1192A, Type 33 and Manufacturers Standardization B
Society ANSI/MSS SP-69 & SP-58, Type 33. D
Finish: Plain or Electro-Galvanized. Contact customer
service for alternative finishes and materials.
Order By: Part number and finish
1"
(25.4)
C
H
3 Holes
Brackets
Mtg. Hole H A B C D
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3067-1 11/8" (28.6) 24" (609.6) 18" (457.2) 211/4" (539.7) 21/2" (63.5)
B3067-2 11/8" (28.6) 30" (762.0) 24" (609.6) 271/4" (692.1) 21/2" (63.5)
B3067-3 11/8" (28.6) 36" (914.4) 30" (762.0) 33" (838.2) 21/2" (63.5)
B3067-4 11/8" (28.6) 42" (1066.8) 36" (914.4) 39" (990.6) 31/2" (88.9)
B3067-5 11/8" (28.6) 50" (1270.0) 42" (1066.8) 46" (1168.4) 31/2" (88.9)
** One Hole
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 212 Eaton
Brackets
B3069W - Welded Knee Bracket
L
Size Range: 1/2" (15mm) thru 8" (200mm) pipe
Material: Steel
Function: Recommended for suspending pipe outward from mounting surface.
Finish: Plain or Electro-Galvanized. Contact customer service for alternative
finishes and materials.
Note: Maximum “L” dimension 16" (406.4mm).
Order By: Part number, pipe size, (**) “L” dimension and finish
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 213 B-Line series Pipe Hangers & Supports
Brackets
Brackets
Upper attachments offered in this section are designed to suspend hanger rods from beams, concrete, and other structural
surfaces by bolting or welding.
Materials
Carbon Steel and Malleable Iron are used in the manufacturing of upper attachments and provide the high strength
properties required. Stainless Steel and other materials are available.
Attachments
Upper
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-
Galvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating,
DURA GREEN™ and other special coatings are available upon request.
Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be
uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be
supplied Electro-Plated, copper plated, or in stainless steel.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 215 B-Line series Pipe Hangers & Supports
Upper Attachments
B3199R - Ceiling Flange
B 27/8"
B3199RCT - Ceiling Flange Dura-Copper Coated (73.0)
Overall Height
2"
Size Range: 3/8"-16 & 1/2"-13 rod (50.8)
B
Material: Malleable Iron (Stainless Steel Type 304 available)
For 1/4" Flat Head
Standard Finish: Plain or Electro-Galvanized Machine Screws
B3199RCT is DURA-COPPER™ coated or Wood Screws
Function: Designed for attaching a hanger or support rod to 13/8"
beams, ceilings, or walls. (34.9)
B3199RCT B3199R
Attachments
Order By: Part number, rod size and finish
Upper
US Patent #5,702,077
Part No. Pipe Size A B C Hole Dia. D Thread Size Design Load Approx. Wt./100
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) E Lbs. (kN) Lbs. (kg)
78-3/8 1/2" - 2” (15 - 60) 3" (76.2) 21/8" (54.0) 11/8" (28.6) 5/16" (7.9) 3/8"-16 150 (0.67) 15 (6.8)
-- Consult Factory For Data
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 216 Eaton
Upper Attachments
B3060L - Light Duty Angle Clip
Size Range: 3/8"-16 rod
Material: Steel (Stainless steel available) 7 Ga.
9/32" Dia (4.5)
Function: Designed for attaching 3/8”-16 hanger rod to the (7.1)
2 Holes 13/16" (20.6)
side of beams or walls.
7/16" Dia
Approvals: Conforms to Federal Specification WW-H-171E &
(11.1)
A-A-1192A, Type 35 and Manufacturers Standardization Society 2 Holes
17/8"
ANSI/MSS SP-69 & SP-58, Type 34. (47.6)
Finish: Plain or Electro-Galvanized 1/2"
(12.7)
Order By: number and finish. 15/16"
(33.3) 11/4"
Design Load: 300 Lbs. (1.33kN) (31.7)
Design Load: 500 Lbs. (2.22 kN) when installed in either direction.
C A
Weight: Approx. Wt./100 - 49 Lbs. (22.2 kg)
Rod Size A B C Hole 1 Hole 2 Hole 3 Max. Rec. Load Approx. Wt./100
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3070-3/8x1/2 3/8"-16 x 1/2"-13 2" (50.8) 13/16" (20.6) 2" (50.8) 9/16" (14.3) 7/16" (11.1) 5/16" (7.9) 700 (3.11) 35 (15.9)
B3070-1/2x1/2 1/2"-13 x 1/2"-13 2" (50.8) 3/4" (19.0) 2" (50.8) 9/16" (14.3) 9/16" (14.3) 5/16" (7.9) 700 (3.11) 34 (15.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 217 B-Line series Pipe Hangers & Supports
Upper Attachments
B3060 - Side Beam Angle Clip
T
Size Range: 3/8"-16 and 7/8"-9 rod
Material: Steel (Stainless steel available) B
A
Function: Designed for attaching a hanger rod to the side of beams or walls. Hole Size
D
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A,
Type 35 and Manufacturers Standardization Society ANSI/MSS SP-69 &
SP-58, Type 34.
C D
Finish: Plain or Electro-Galvanized. Contact customer service for
alternative finishes and materials. B
Order By: Part number and finish.
B3060-3/8 7/16" (11.1) 23/16" (55.6) 2" (50.8) 11/4" (31.7) 1/4" (6.3) 305 (1.35) 53 (24.0)
B3060-1/2 9/16" (14.3) 23/16" (55.6) 2" (50.8) 11/4" (31.7) 1/4" (6.3) 565 (2.51) 51 (23.1)
B3060-5/8 11/16" (17.5) 23/16" (55.6) 2" (50.8) 11/4" (31.7) 1/4" (6.3) 909 (4.02) 48 (21.8)
B3060-3/4 13/16" (20.6) 3" (76.2) 3" (76.2) 13/4" (44.4) 3/8" (9.5) 1355 (6.03) 169 (74.8)
B3060-7/8 15/16" (23.8) 4" (101.6) 4" (101.6) 21/2" (63.5) 3/8" (9.5) 1870 (8.32) 312 (141.5)
TOLCO™ Fig. 51NFPA - Side Beam Bracket for NFPA Rod & Fastener Sizing
Hole 1
Size Range: 3/8"-16 thru 1/2"-13 rod, 1/2" (15mm) thru 8" pipe (200mm) B
Material: Steel
Hole 2
Function: Recommended for attaching hanger rod to side of beams or walls.
Designed to accommodate current rod schedule and fastener requirements per A
National Fire Protection Association (NFPA) Pamphlet 13.
B
Approvals: Underwriters Laboratories Listed in the USA (UL) and
Canada (cUL), and Factory Mutual Engineering approved.
Attachments
Finish: Plain. Contact customer service for alternative finishes
Upper
and materials. A C
Order By: Part number, rod size and finish
51NFPA-3/8x3/8 1/2" - 2” (15 - 60) 3/8"-16 2" (50.8) 3/4" (19.0) 2" (50.8) 7/16" (11.1) 7/16" (11.1)
51NFPA-3/8x1/2 21/2" - 4” (65 - 100) 3/8"-16 2" (50.8) 3/4" (19.0) 2" (50.8) 9/16" (14.3) 7/16" (11.1)
51NFPA-1/2x1/2 5" - 6” (125 - 150) 1/2"-13 21/2" (63.5) 3/4" (19.0) 21/2" (63.5) 9/16" (14.3) 9/16" (14.3)
51NFPA-1/2x5/8 8” (200) 1/2"-13 21/2" (63.5) 3/4" (19.0) 21/2" (63.5) 11/16" (17.5) 9/16" (14.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 218 Eaton
Upper Attachments
TOLCO™ Fig. 50 - Side Beam Bracket for NFPA Rod & Fastener Sizing H
B
Size Range: 3/8"-16 thru 7/8"-9 rod
H
Material: Steel
Function: Recommended for attaching hanger rod to side of beams A
or walls. B
Approvals: Factory Mutual Engineering approved (FM).
Finish: Plain. Contact customer service for alternative finishes
and materials.
Order By: Part number, rod size and finish A C
Part No. Rod A B C Hole Size H Max. Rec. Load Approx. Wt./100
Size in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
50-3/8 3/8"-16 2" (50.8) 3/4" (19.0) 2" (50.8) 7/16" (11.1) 700 (3.22) 35 (15.9)
50-1/2 1/2"-13 2" (50.8) 3/4" (19.0) 2" (50.8) 9/16" (14.3) 700 (3.22) 35 (15.9)
50-5/8 5/8"-11 2" (50.8) 3/4" (19.0) 2" (50.8) 11/16" (17.5) 700 (3.22) 32 (14.5)
50-3/4 3/4"-10 21/2" (63.5) 3/4" (19.0) 21/2" (63.5) 13/16" (20.6) 1250 (5.56) 110 (49.9)
50-7/8 7/8"-9 21/2" (63.5) 3/4" (19.0) 21/2" (63.5) 15/16" (23.8) 1250 (5.56) 100 (45.3)
B3061-1 1 3" (76.2) 2" (50.8) 7/16" (11.1) 180 (0.80) 46 (20.8)
Upper
B3061-2 2 4" (101.6) 3" (76.1) 7/16" (11.1) 180 (0.80) 65 (29.5)
B3061-3 3 3" (76.2) 2" (50.8) 9/16" (14.3) 390 (1.73) 85 (38.5)
B3061-4 4 4" (101.6) 3" (76.1) 9/16" (14.3) 390 (1.73) 115 (52.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 219 B-Line series Pipe Hangers & Supports
Upper Attachments
TOLCO™ Fig. 58 - Threaded Side Beam Bracket
Size Range: 3/8"-16 rod, pipe sizes 1/2" (15mm) thru 4" (100mm) B
Material: Pre-Galvanized Steel
Function: Practical and economical bracket used to support piping from wood, concrete
or steel beams.
A
Features: Unique design allows rod to be easily threaded into bracket. Offset design
permits unlimited rod adjustment. Center mounting hole will accept 3/8" and 1/2" fastener
bolts. Per NFPA 13: 1/2" (15mm) thru 2" (50mm) pipe requires 3/8" fastener, 21/2" (65mm) thru
4" (100mm) pipe requires 1/2" fastener.*
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL), and
Factory Mutual Engineering approved thru 4" (100mm) pipe.
C
Finish: Pre-Galvanized
Order By: Part number and finish
2 - 1/4" x 2" Lag Bolts
*Note: Additionally UL has listed the Fig. 58 with fasteners (No Pre-Drilling
as shown in table below. Up to 4" (100mm) pipe
Per NFPA
1 - 3/8" or 1/2" Lag Bolts
Up to 4" (100mm) pipe
2 - #16 x 2"
Drive Screws
1/2" (15mm) - 4" (100mm) pipe
Attachments
Up to 4" (100mm) pipe
Upper
UL Listed Fastener Table
Pipe Size Qty Fastener Type Material Bolt & Hex Nut
Up to 4" (100mm) pipe
2" 2 #16 x 2" Drive screws Wood
2" 1 3/8" Lag bolt Wood
21/2" - 4" 1 1/2" Lag bolt Wood
31/2" 2 1/4" x 11/2" Lag bolts Wood
4" 2 1/4" x 2" Lag bolts ** Wood
4" 2 #14 x 1" or 1/4" x 1" Tek type screws Metal (15 gauge)
4" 2 #14 x 1" or 1/4" x 1" Tek type screws Metal (16 gauge)
** No pre-drilling
Part No. Pipe Size Rod A B C Max. Rec. Load Approx. Wt./100
in. (mm) Size in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
58 1/2" - 4” (15 - 100) 3/8"-16 23/4" (69.8) 11/2" (38.1) 11/8" (28.6) 300*** (1.33) 14 (6.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 220 Eaton
Upper Attachments
TOLCO™ Fig. 75 - Swivel Attachment
Size Range: — 3/8"-16 Rod Attachment
Material: Steel
Function: Three recommended applications for this product:
• May be used as a Branch Line Restraint for structural attachment to
anchor bolt, beam clamp, etc.
• May be used as an upper attachment with short hanger rod to omit
seismic bracing.
• May be used in a pitched or sloped roof application, to meet
requirements of NFPA 13 (2010) 9.1.2.6.
Approvals: Underwriters Laboratories Listed in the USA (UL) and
Canada (cUL) to support up to 4" (100mm) pipe.
Finish: Electro-Galvanized
Weight: Approx. Wt./100 - 13.3 Lbs. (6.0kg)
Order By: Part number
Patent: #7,887,248
Fig. 78 All
Steel Ceiling
Fig. 75 Swivel
Plate
Attachment
Fig. 200
“Trimline” All Threaded Rod
Adjustable
Band Hanger
of
Ro
ched
Pit Fig. 65 Reversible
Beam Clamp
Fig. 75 Swivel
Attachment Fig. 75 Swivel
W-Beam
All Threaded Rod Attachment
All Threaded Rod
B3100
Clevis Hanger
May be used as a upper attachment May be used with a pitched roof appli-
with short hanger rod to omit seismic cation, to meet requirements of NFPA 13
bracing (2010) Sec. 9.1.2.5.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 221 B-Line series Pipe Hangers & Supports
Upper Attachments
B3058 - Side Beam Connector
Size Range: 3/8"-16 & 1/2"13 rods
For #12 Flat Head
Material: Malleable Iron Machine Screws or
Wood Screws
Function: Designed for attaching hanger rod to the side of B
beams or walls.
Tapped Hole
Approvals: Conforms to Federal Specification WW-H-171E
& A-A-1192A, Type 35 and Manufacturers Standardization
Society ANSI/MSS SP-69 & SP-58, Type 34. A
(Rod Size) C
Finish: Plain or Electro-Galvanized Hanger Rod
Not Included
Order By: Part number and finish.
Attachments
Finish: Plain or Electro-Galvanized E
Upper
Order By: Part number and finish.
Part No. B C D E F T
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3062-3/8 7/16" (11.1) 7/8" (22.2) 13/8" (34.9) 5/8" (15.9) 17/16" (36.5) 1/4" (6.3)
B3062-1/2 9/16" (14.3) 13/16" (30.2) 113/16" (46.0) 3/4" (19.0) 17/8" (47.6) 11/32" (8.7)
B3062-5/8 3/4" (19.0) 17/16" (36.5) 23/16" (55.6) 7/8" (22.2) 21/4" (54.0) 7/16" (11.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 222 Eaton
Upper Attachments
B3083 - Welded Beam Attachment
B3083WO - Welded Beam Attachment Without Pin
A
B
Size Range: 3/8"-16 thru 2"-41/2 rod Center of cross bolt to bottom
(Rod Size)
Hanger Rod
Material: Steel (Stainless steel available) of attachment. B
Not Included
Function: Designed for attaching hanger rod to the bottom of C
structural steel where heavy loads and large hanger rod sizes are Center of cross bolt to top of
attachment. T x W C
required. Can be welded in place in either the upright or inverted
position. When using B3083WO, attach hanger rod to bolt or pin Steel Size
with a B3200 weldless eye nut or B3210 and B3211 series eye rods.
Approvals: Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 22 and Manufacturers Standardization Society Bolt or
ANSI/MSS SP-69 & SP-58, Type 22. Pin Size
Finish: Plain or Electro-Galvanized. Contact customer service for D Dia. E
alternative finishes and materials.
B3083
Order By: Part number (with or without hardware) and finish.
Note: When ordering with hardware for sizes 3/8 thru 11/8, hex head
cap screws and hex nuts will be supplied. For 11/4 thru 2, clevis pin
and cotter pins will be supplied. Must be specified with or without
hardware. Field weld where
required.
B3083WO
B3083-11/8 11/8"-7 11/4" (31.7) 7450 (33.14) 5830 (25.93) 402 (182.2) 680 (308.3)
Upper
B3083-11/4 11/4"-7 13/8" (34.9) 9500 (42.25) 7440 (33.09) 734 (332.7) 955 (432.9)
B3083-11/2 11/2"-6 15/8" (41.3) 13800 (61.38) 10807 (48.07) 1460 (661.8) 1817 (823.7)
B3083-13/4 13/4"-5 17/8" (47.6) 18600 (82.73) 14566 (64.79) 1746 (791.5) 2310 (1047.1)
B3083-2 2"-41/2 21/4" (57.1) 24600 (109.42) 19625 (87.29) 2190 (992.7) 2996 (1358.1)
B C Dia. D E T xW
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3083-3/8 2" (50.8) 7/8" (22.2) 9/16" (14.3) 11/4" (31.7) 1/4" x 2" (6.3 x 50.8)
B3083-1/2 2" (50.8) 7/8" (22.2) 11/16" (17.5) 11/4" (31.7) 1/4" x 2" (6.3 x 50.8)
B3083-5/8 2" (50.8) 7/8" (22.2) 13/16" (20.6) 11/4" (31.7) 1/4" x 2" (6.3 x 50.8)
B3083-3/4 2" (50.8) 11/8" (28.6) 15/16" (23.8) 11/2" (38.1) 3/8" x 21/2" (9.5 x 63.5)
B3083-7/8 3" (76.2) 11/4" (31.7) 11/8" (28.6) 2" (50.8) 3/8" x 21/2" (9.5 x 63.5)
B3083-1 3" (76.2) 11/2" (38.1) 11/4" (31.7) 2" (50.8) 1/2" x 3" (12.7 x 76.2)
B3083-11/8 3" (76.2) 11/2" (38.1) 13/8" (34.9) 23/4" (69.8) 1/2" x 3" (12.7 x 76.2)
B3083-11/4 3" (76.2) 2" (50.8) 11/2" (38.1) 3" (76.2) 5/8" x 4" (15.9 x 101.6)
B3083-11/2 4" (101.6) 21/2" (63.5) 13/4" (44.4) 31/2" (88.9) 3/4" x 5" (19.0 x 127.0)
B3083-13/4 5" (127.0) 23/4" (69.8) 2" (50.8) 33/4" (95.2) 3/4" x 5" (19.0 x 127.0)
B3083-2 5" (127.0) 31/4" (82.5) 23/8" (60.3) 33/4" (95.2) 3/4" x 6" (19.0 x 152.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 223 B-Line series Pipe Hangers & Supports
Upper Attachments
B3080S - (Short) Structural Welding Lug
B3080L - (Long) Structural Welding Lug
Size Range: Short lug is available for use with 1/2"-13 thru
2"-41/2 rods; Long lug may be used with 1/2"-13 thru 2"-41/2 rod. Note:
Must be field welded to
Material: Steel
structural steel.
Function: Designed for attachment to structural steel.
Use with B3201 forged steel clevis.
Approvals: Conforms to Manufacturers Standardization D Dia.
Society ANSI/MSS SP-69 & SP-58, Type 57.
H
Finish: Plain or Electro-Galvanized
Order By: Part number and finish. T D Dia.
R
W
H
B3080S
T
R
W
B3080L
B3080L B3080S
Attachments
B3080S-11/4 B3080L-11/4 11/4"-7 13/8" (38.1) 9500 (42.25) 310 (140.6) 381 (172.8)
Upper
B3080S-11/2 B3080L-11/2 11/2"-6 15/8" (41.3) 13800 (61.38) 503 (228.1) 662 (300.3)
B3080S-13/4 B3080L-13/4 13/4"-5 17/8" (47.6) 18600 (82.73) 487 (220.9) 646 (293.0)
B3080S-2 B3080L-2 2"-41/2 21/4" (57.1) 24600 (109.42) 744 (337.5) 808 (366.5)
B3080S-1/2 B3080L-1/2 11/16" (17.5) 11/2" (38.1) 3" (76.2) 11/4" (31.7) 1/4" (6.3) 21/2" (63.5)
B3080S-5/8 B3080L-5/8 13/16" (20.6) 11/2" (38.1) 3" (76.2) 11/4" (31.7) 1/4" (6.3) 21/2" (63.5)
B3080S-3/4 B3080L-3/4 15/16" (23.8) 11/2" (38.1) 3" (76.2) 11/4" (31.7) 3/8" (9.5) 21/2" (63.5)
B3080S-7/8 B3080L-7/8 11/8" (28.6) 2" (50.8) 3" (76.2) 11/4" (31.7) 3/8" (9.5) 21/2" (63.5)
B3080S-1 B3080L-1 11/4" (31.7) 2" (50.8) 3" (76.2) 11/2" (38.1) 1/2" (12.7) 3" (76.2)
B3080S-11/8 B3080L-11/8 13/8" (34.9) 3" (76.2) 4" (101.6) 11/2" (38.1) 1/2" (12.7) 3" (76.2)
B3080S-11/4 B3080L-11/4 11/2" (38.1) 3" (76.2) 4" (101.6) 2" (50.8) 5/8" (15.9) 4" (101.6)
B3080S-11/2 B3080L-11/2 13/8" (44.4) 3" (76.2) 41/2" (114.3) 21/2" (63.5) 3/4" (19.0) 5" (127.0)
B3080S-13/4 B3080L-13/4 2" (50.8) 3" (76.2) 41/2" (114.3) 21/2" (63.5) 3/4" (19.0) 5" (127.0)
B3080S-2 B3080L-2 23/8" (60.3) 4" (101.6) 41/2" (114.3) 3" (76.2) 3/4" (19.0) 6" (152.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 224 Eaton
Upper Attachments
B3085 - Rod Attachment Concrete Plate
Size Range: 3/8"-16 thru 2"-41/2 rod
Material: Steel A A
B3085-3/8 3/8"-16 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0)
B3085-1/2 1/2"-13 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0)
B3085-5/8 5/8"-11 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0)
B3085-3/4 3/4"-10 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0)
B3085-7/8 7/8”-9 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0)
B3085-1 1"-8 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4)
B3085-11/8 11/8"-7 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4)
B3085-11/4 11/4"-7 2" 8" 12" (304.8) 6" (152.4)
Attachments
(50.8) (203.2)
Upper
B3085-11/2 11/2"-6 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4)
B3085-3/8 27/8" (73.0) 9/16" (14.3) 3/8" (9.5) 730 (3.25) 1145 (519.4)
B3085-1/2 27/8" (73.0) 9/16" (14.3) 3/8" (9.5) 1450 (6.00) 1143 (518.4)
B3085-5/8 27/8" (73.0) 9/16" (14.3) 1/2" (12.7) 2160 (9.61) 1490 (675.8)
B3085-3/4 31/8" (79.4) 11/16" (`17.5) 1/2" (12.7) 3230 (14.37) 1574 (713.9)
B3085-7/8 41/4" (107.7) 11/16" (`17.5) 1/2" (12.7) 4480 (19.93) 1635 (741.6)
B3085-1 41/2" (114.3) 13/16" (`20.6) 3/4" (19.0) 5900 (26.24) 3420 (1551.3)
B3085-11/8 43/4" (120.6) 15/16" (`23.8) 3/4" (19.0) 7450 (33.14) 3413 (1548.1)
B3085-11/4 5" (127.0) 15/16" (`23.8) 3/4" (19.0) 9500 (42.25) 3747 (1699.6)
B3085-11/2 61/2" (165.1) 11/8" (`28.6) 1" (25.4) 13800 (61.38) 5438 (2466.7)
* Based on allowable stresses shown in the ANSI code for pressure piping.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 225 B-Line series Pipe Hangers & Supports
Upper Attachments
B3086 - Clevis Concrete Plate
Size Range: 3/8"-16 thru 2"-41/2 rod
Material: Steel A A
Function: Structural attachment to concrete ceiling where C
flexibility is desired. (Use with B3200 weldless eye nut, B C
B
B3210 eye rod or B3211 welded eye rod.)
Finish: Plain. Contact customer service for alternative
D D
finishes and materials. G
Order By: Part number, rod size and finish H
F Dia.
4 Holes
R
See B3083
S
E
Bolt or Pin Size
B3086-3/8 3/8"-16 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0) 1/2" (12.7) 9/16" (14.3)
B3086-1/2 1/2"-13 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0) 5/8" (15.9) 9/16" (14.3)
B3086-5/8 5/8"-11 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0) 3/4" (19.0) 9/16" (14.3)
B3086-3/4 3/4"-10 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0) 7/8" (22.2) 11/16" (17.5)
B3086-7/8 7/8”-9 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0) 1" (25.4) 11/16" (17.5)
B3086-1 1"-8 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4) 11/8" (28.6) 13/16" (20.6)
B3086-11/8 11/8"-7 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4) 11/4" (31.7) 15/16" (23.8)
B3086-11/4 11/4"-7 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4) 13/8" (34.9) 15/16" (23.8)
Attachments
B3086-11/2 11/2"-6 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4) 15/8" (41.3) 11/8" (28.6)
Upper
Part No. G H R S Max. Rec. Load* Approx. Wt./100
in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3086-3/8 3/8" (9.5) 2" (50.8) 7/8" (22.2) 11/4" (31.7) 730 (3.25) 1165 (528.4)
B3086-1/2 3/8" (9.5) 2" (50.8) 7/8" (22.2) 11/4" (31.7) 1350 (6.00) 1178 (534.4)
B3086-5/8 1/2" (12.7) 2" (50.8) 7/8" (22.2) 11/4" (31.7) 2160 (9.61) 1546 (701.2)
B3086-3/4 1/2" (12.7) 2" (50.8) 11/8" (28.6) 11/2" (38.1) 3230 (14.37) 1673 (758.9)
B3086-7/8 1/2" (12.7) 3" (76.2) 11/4" (31.7) 2" (50.8) 4480 (19.93) 1783 (808.7)
B3086-1 3/4" (19.0) 3" (76.2) 11/2" (38.1) 2" (50.8) 5900 (26.24) 3636 (1649.3)
B3086-11/8 3/4" (19.0) 3" (76.2) 13/4" (44.4) 23/4" (69.8) 7450 (33.14) 3708 (1681.9)
B3086-11/4 3/4" (19.0) 3" (76.2) 2" (50.8) 3" (76.2) 9500 (42.25) 3986 (1808.0)
B3086-11/2 1" (25.4) 4" (101.6) 21/2" (63.5) 31/2" (88.9) 13800 (61.38) 5816 (2638.1)
* Based on allowable stresses shown in the ANSI code for pressure piping.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 226 Eaton
Upper Attachments
B3084 - Single Lug Concrete Plate
Size Range: 1/2"-13 thru 2"-41/2 rod A A
Material: Steel
B B C
Function: Structural attachment to concrete ceiling. C
Use with B3201 bridge clevis to attach to center lug. D
* Based on allowable stresses shown in the ANSI code for pressure piping.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 227 B-Line series Pipe Hangers & Supports
Upper Attachments
B3082 - Adjustable Rod Beam Attachment
Size Range: 3/8"-16 thru 7/8"-9 rod
Material: Steel
D
Function: Designed for attaching hanger rod to bottom
flange of beam or ceilings allowing for vertical adjustment
where required. C
B F
Standard Finish: Plain. Contact customer service for
alternative finishes and materials.
Order By: Part number and finish.
F
From top of hanger rod nut
to top of attachment.
A E Dia.
(Rod Size) Mounting Holes
Hanger Rod
Not Included
Rod Size B C D
Part No. A in. (mm) in. (mm) in. (mm)
Attachments
Upper
B3082-1/2 1/2"-13 31/8" (97.4) 43/4" (120.6) 6" (152.4)
B3082-5/8 5/8"-11 31/8" (79.4) 43/4" (120.6) 6" (152.4)
B3082-3/4 3/4"-10 311/16" (93.7) 61/4" (158.7) 73/4" (196.8)
B3082-7/8 7/8"-9 33/4" (95.2) 63/8" (161.9) 81/4" (209.5)
Design
Part No. Dia. E Adjustment F Load Approx.Wt./100
in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3082-3/8 7/16" (11.1) 21/8" (54.0) 810 (3.60) 53 (24.0)
B3082-1/2 9/16" (14.3) 25/16" (58.7) 1130 (5.02) 129 (58.5)
B3082-5/8 9/16" (14.3) 23/16" (55.6) 1810 (8.05) 128 (58.0)
B3082-3/4 11/16" (17.5) 29/16" (65.1) 2710 (12.05) 196 (88.9)
B3082-7/8 13/16" (20.6) 21/2" (63.5) 3770 (16.77) 282 (127.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 228 Eaton
Threaded Accessories
Threaded accessories offered in this section are designed to reduce installation time. A wide range of types and sizes
are available for various applications.
Materials
For maximum loading design, Carbon Steel, Forged Steel, and Malleable Iron are used in the manufacturing of threaded
accessories. Stainless Steel and other materials are available.
Finishes
The standard finishes for threaded accessories are plain steel (oil coated) sometimes referred to as black and Electro-
Galvanized Zinc (ASTM B633 SC1). Hot-Dip Galvanized After Fabrication (ASTM A153) and other special coatings are
available upon request.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 229 B-Line series Pipe Hangers & Supports
Threaded Accessories
Accessories
Threaded
B3222-3/4 3/4"-10 1/2" (12.7) 2" (50.8) 1900 (8.45) 38 (17.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 230 Eaton
Threaded Accessories
Rod Size B C D E F G
Part No. A in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3200-3/8 3/8"-16 11/2" (38.1) 13/16" (30.2) 1/2" (12.7) 2" (50.8) 13/8" (34.9) 11/16" (17.5)
B3200-1/2 1/2"-13 11/2" (38.1) 13/16" (30.2) 1/2" (12.7) 2" (50.8) 13/8" (34.9) 11/16" (17.5)
B3200-5/8 5/8"-11 11/2" (38.1) 13/16" (30.2) 1/2" (12.7) 2" (50.8) 13/8" (34.9) 11/16" (17.5)
B3200-3/4 3/4"-10 11/2" (38.1) 13/16" (30.2) 1/2" (12.7) 2" (50.8) 13/8" (34.9) 11/16" (17.5)
B3200-7/8 7/8"-9 2" (50.8) 111/16" (42.9) 3/4" (19.0) 25/8" (66.7) 115/16" (49.2) 1" (25.4)
B3200-1 1"-8 2" (50.8) 111/16" (42.9) 3/4" (19.0) 25/8" (66.7) 115/16" (49.2) 1" (25.4)
B3200-11/8 11/8"-7 21/2" (63.5) 113/16" (46.0) 1" (25.4) 33/8" (85.7) 23/8" (60.3) 11/4" (31.7)
B3200-11/4 11/4"-7 21/2" (63.5) 113/16" (46.0) 1" (25.4) 33/8" (85.7) 23/8" (60.3) 11/4" (31.7)
B3200-11/2 11/2"-6 21/2" (63.5) 113/16" (46.0) 1" (25.4) 33/8" (85.7) 23/8" (60.3) 11/4" (31.7)
B3200-13/4 13/4"-5 4" (101.6) 4" (101.6) 11/2" (38.1) 61/4" (158.7) 4" (101.6) 21/4" (57.1)
B3200-2 2"-41/2 4" (101.6) 4" (101.6) 11/2" (38.1) 61/4" (158.7) 4" (101.6) 21/4" (57.1)
B3200-21/4 21/4"-41/2 4" (101.6) 4" (101.6) 11/2" (38.1) 61/4" (158.7) 4" (101.6) 21/4" (57.1)
B3200-21/2 21/2"-41/2 4" (101.6) 4" (101.6) 11/2" (38.1) 61/4" (158.7) 4" (101.6) 21/4" (57.1)
Design Load
650°F (343°C) 750°F (399°C) Approx. Wt./100
Part No. Lbs. (kN) Lbs. (kN) Lbs. (kg)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 231 B-Line series Pipe Hangers & Supports
Threaded Accessories
B501 - Light Weight U-Bolt with 2 Hex Nuts
Size Range: 1/2" (15mm) thru 8" (200mm) pipe
Material: Carbon Steel
A
Function: Recommended for supporting or anchoring light pipe loads.
Maximum Temperature: 650°F (343°C)
Hex Nuts
B
Finish: Plain. Contact customer service for alternative finishes and C Included
materials.
Order By: Part number and finish. D
Design
Load
B501-1/2 15/16” (23.8) 13/4” (44.4) 11/2” (38.1) 5/16”-18 600 (2.67) 12 (5.4)
B501-3/4 11/8” (28.6) 13/4” (44.4) 15/8” (41.3) 5/16”-18 600 (2.67) 13 (5.9)
B501-1 13/8” (29.9) 17/8” (47.6) 15/8” (41.3) 5/16”-18 900 (4.00) 14 (6.3)
B501-11/4 123/32” (43.6) 13/4” (44.4) 115/32” (37.3) 5/16”-18 900 (4.00) 15 (6.8)
B501-11/2 2” (50.8) 13/4” (44.4) 17/16” (36.5) 5/16”-18 900 (4.00) 16 (7.2)
B501-2 27/16” (61.9) 21/16” (52.4) 17/8” (47.6) 3/8”-16 1200 (5.34) 27 (12.2)
B501-21/2 215/16” (74.6) 21/16” (52.4) 113/16” (46.0) 3/8”-16 1200 (5.34) 32 (14.5)
B501-3 39/16” (90.5) 2” (50.8) 13/4” (44.4) 3/8”-16 1800 (8.00) 36 (16.3)
B501-31/2 43/32” (94.6) 2” (50.8) 123/32” (43.6) 3/8”-16 1800 (8.00) 38 (17.2)
Accessories
Threaded
B501-4 419/32” (116.7) 21/4” (57.1) 121/32” (50.0) 3/8”-16 1800 (8.00) 42 (19.0)
B501-5 521/32” (143.6) 21/4” (57.1) 2” (50.8) 1/2”-13 2400 (10.70) 92 (41.7)
B501-6 63/4” (171.4) 25/8” (66.7) 23/8” (60.3) 5/8”-11 2400 (10.70) 176 (79.8)
B501-8 83/4” (222.2) 25/8” (66.7) 23/8” (60.3) 5/8”-11 2400 (10.70) 191 (86.6)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 232 Eaton
Threaded Accessories
B3188 - Standard U-Bolt with 4 Hex Nuts
B3188C - Standard Plastic Coated U-Bolt
C
Size Range: 1/2" (15mm) thru 30" (900mm) pipe B
A
Material: Steel E Thread Size
Design
Function: Recommended for support, anchor or guide of pipe. Load 2 Hex Nuts Included
Approvals: Underwriters Laboratories Listed 3/4" (20mm) thru 12" (300mm). TL TL
Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 24 Thread Length
D
and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58,
Type 24. Design
Load 3
Maximum Temperature: 750°F (399°C)
Finish: Plain. Contact customer service for alternative finishes and
materials. Design
Load 1
Order By: Part number and finish. U-bolt can be furnished with longer
tangents “D” or with longer threads “TL”. Consult factory.
Note: When furnished in Hot-Dip Galvanized
finish, oversize tapped hex nuts must be used.
B3188NS - Non-standard (NS) U-bolts are
available upon request. Specify dimensions
other than standard. B3188DI - For ductile
iron pipe.
B3188 B3188C
Plastic Coated
Pipe Size Thread Size Thread Length TL B
Part No. in. (mm) in. (mm) in. (mm)
B3188-1/2 1/2" (15) 1/4"-20 21/8" (54.0) 15/16" (23.8)
B3188-3/4 3/4" (20) 1/4"-20 21/8" (54.0) 11/8" (28.6)
B3188-1 1" (25) 1/4"-20 21/8" (54.0) 13/8" (34.9)
B3188-11/4 11/4" (32) 3/8"-16 21/8" (54.0) 111/16" (42.9)
B3188-11/2 11/2" (40) 3/8"-16 21/2" (63.5) 2" (50.8)
B3188-2 2" (50) 3/8"-16 21/2" (63.5) 27/16" (61.9)
B3188-21/2 21/2" (65) 1/2"-13 3" (76.2) 215/16" (74.6)
B3188-3 3" (80) 1/2"-13 3" (76.2) 39/16" (90.5)
B3188-31/2 31/2" (90) 1/2"-13 3" (76.2) 41/16" (103.2)
B3188-4 4" (100) 1/2"-13 3" (76.2) 49/16" (115.9)
B3188-5 5" 1/2"-13 3" 521/32" (143.6)
Accessories
(125) (76.2)
Threaded
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 233 B-Line series Pipe Hangers & Supports
Threaded Accessories
B3188 - Standard U-Bolt with 4 Hex Nuts cont.
Accessories
Threaded
B3188-4 2700 (12.01) 2114 (9.40) 675 (3.00) 900 (4.00)
B3188-5 2700 (12.01) 2114 (9.40) 675 (3.00) 1080 (4.80)
B3188-6 4320 (19.21) 3382 (15.04) 1080 (4.80) 1080 (4.80)
B3188-8 4320 (19.21) 3382 (15.04) 1080 (4.80) -- --
B3188-10 6460 (28.73) 5060 (22.50) 1615 (7.18) -- --
B3188-12 9960 (44.30) 7016 (31.21) 2490 (11.07) -- --
B3188-14 9960 (44.30) 7016 (31.21) 2490 (11.07) -- --
B3188-16 9960 (44.30) 7016 (31.21) 2490 (11.07) -- --
B3188-18 11800 (52.48) 9240 (41.10) -- -- -- --
B3188-20 11800 (52.48) 9240 (41.10) -- -- -- --
B3188-24 11800 (52.48) 9240 (41.10) -- -- -- --
B3188-30 11800 (52.48) 9240 (41.10) -- -- -- --
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 234 Eaton
Threaded Accessories
B3201-3/8 3/8"-16 39/16" (90.5) 17/16" (36.5) 1/2" (12.7) 5/8" (15.9) 1/2" (12.7)
B3201-1/2 1/2"-13 39/16" (90.5) 17/16" (36.5) 1/2" (12.7) 5/8" (15.9) 5/8" (15.9)
B3201-5/8 5/8"-11 39/16" (90.5) 17/16" (36.5) 5/8" (15.9) 5/8" (15.9) 3/4" (19.0)
B3201-3/4 3/4"-10 4" (101.6) 21/2" (63.5) 3/4" (19.0) 11/8" (28.6) 7/8" (22.2)
B3201-7/8 7/8"-9 4" (101.6) 21/2" (63.5) 7/8" (22.2) 11/8" (28.6) 1" (25.4)
B3201-1 1"-8 51/16" (128.6) 3" (76.2) 1" (25.4) 11/4" (31.7) 11/8" (28.6)
B3201-11/8 11/8"-7 51/16" (128.6) 3" (76.2) 11/8" (28.6) 11/4" (31.7) 11/4" (31.7)
B3201-11/4 11/4"-7 51/16" (128.6) 3" (76.2) 11/4" (31.7) 11/4" (31.7) 13/8" (34.9)
B3201-11/2 11/2"-6 6" (152.4) 31/2" (88.9) 11/2" (38.1) 11/2" (38.1) 15/8" (41.3)
B3201-13/4 13/4"-5 515/16" (150.8) 4" (101.6) 11/2" (38.1) 13/4" (44.4) 17/8" (47.6)
B3201-2 2"-41/2 7" (177.8) 5" (127.0) 21/2" (63.5) 21/4" (57.1) 21/4" (57.1)
B3201-3/8 5/16" (7.9) 11/16" (27.0) 730 (3.25) 572 (2.54) 102 (46.2) 85 (38.5)
B3201-1/2 5/16" (7.9) 11/16" (27.0) 1350 (6.00) 1057 (4.70) 112 (50.8) 82 (37.2)
B3201-5/8 5/16" (7.9) 11/16" (27.0) 2160 (9.61) 1692 (7.52) 134 (60.8) 78 (35.4)
B3201-3/4 3/8" (9.5) 11/4" (31.7) 3230 (14.37) 2530 (11.25) 250 (113.4) 163 (73.9)
B3201-7/8 3/8" (9.5) 11/4" (31.7) 4480 (19.93) 3508 (15.60) 305 (138.3) 161 (73.0)
B3201-1 1/2" (12.7) 11/2" (38.1) 5900 (26.24) 4620 (20.55) 656 (297.5) 449 (203.6)
B3201-11/8 1/2" (12.7) 11/2" (38.1) 7450 (33.14) 5830 (25.93) 718 (325.7) 433 (196.4)
B3201-11/4 1/2" (12.7) 11/2" (38.1) 9500 (42.25) 7440 (33.09) 603 (273.5) 382 (173.3)
B3201-11/2 1/2" (12.7) 13/4" (44.4) 13800 (61.38) 10807 (48.07) 952 (431.8) 600 (272.1)
B3201-13/4 1/2" (12.7) 2" (50.8) 18600 (82.73) 14566 (64.79) 1357 (615.5) 800 (362.9)
B3201-2 5/8" (15.9) 21/2" (63.5) 24600 (109.42) 19625 (87.29) 2403 (1090.0) 1600 (725.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 235 B-Line series Pipe Hangers & Supports
Threaded Accessories
B3203-3/8 3/8"-16 3/4" to 2" (20 to 50) 21/16" (52.4) 11/4" (31.7) 11/4" (31.7)
B3203-1/2 1/2"-13 21/2" to 31/2" (65 to 90) 21/16" (58.7) 13/8" (34.9) 13/8" (34.9)
B3203-5/8 5/8"-11 4"-5" (100 to125) 27/16" (61.9) 11/2" (38.1) 17/16" (36.5)
B3203-3/4 3/4"-10 6" (150) 27/8" (73.0) 13/4" (44.4) 111/16" (42.9)
B3203-7/8 7/8"-9 8" to 12" (200 to 300) 3" (76.2) 17/8" (47.6) 13/4" (44.4)
B3203-3/8 9/16" (14.3) 1/2" (12.7) 1/2" (12.7) 730 (3.25) 18 (8.1)
B3203-1/2 11/16" (17.5) 5/8" (15.9) 1/2" (12.7) 1350 (6.00) 37 (16.8)
B3203-5/8 3/4" (19.0) 5/8" (15.9) 1/2" (12.7) 1550 (6.89) 42 (19.0)
B3203-3/4 7/8" (22.2) 5/8" (15.9) 1/2" (12.7) 2100 (9.34) 56 (25.4)
B3203-7/8 7/8" (22.2) 3/4" (19.0) 9/16" (14.3) 2350 (10.45) 75 (34.0)
Accessories
Threaded
Function: Designed for attachment of 3/8"-16
hanger rod to structure.
13
/32" Dia.
Approvals: Underwriters Laboratories Listed for up to (10.3)
2" (50mm) pipe.
35/8"
Weight: Approx. Wt./100 - 6.0 lbs. (2.7kg) (92.1)
Finish: Electro-Galvanized
Order By: Part number and finish
Design Load: 610 lbs (2.71kN)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 236 Eaton
Threaded Accessories
B3224 - Hanger Adjuster A
(Rod Size)
B3224CT - Copper Tubing Hanger Adjuster Hanger Rod Not
Included
Size Range: 1/4"-20 thru 3/4"-10 rod
Material: Malleable Iron C
Function: To provide an adjustable threaded connection
for hanger rods. B
Approvals: Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 15 and Manufacturers Standardization D Dia.
Society ANSI/MSS SP-69 & SP-58, Type 15.
Finish: Plain. Contact customer service for alternative
finishes and materials.
B3224 B3224CT
Order By: Part number, rod size and finish
B3224-1/4 1/4"-20 3/8" (10) 13/4" (44.4) 37/8" (98.4) 7/32" (5.5) 230 (1.02) 9 (4.1)
B3224-3/8 3/8"-16 1/2" to 2" (15 to 50) 13/4" (44.4) 37/8" (98.4) 13/32" (10.3) 730 (3.25) 28 (12.7)
B3224-1/2 1/2"-13 21/2" to 31/2" (65 to 90) 13/4" (44.4) 37/8" (98.4) 13/32" (10.3) 730 (3.25) 29 (13.1)
B3224-5/8 5/8"-11 4" to 5" (100 to 125) 21/4" (57.1) 51/8" (130.2) 1/2" (12.7) 730 (3.25) 30 (13.6)
B3224-3/4 3/4"-10 6" (150) 21/4" (57.1) 51/8" (130.2) 9/16" (14.3) 860 (3.82) 74 (33.5)
B3202 - Turnbuckle A
(Rod Size)
Size Range: 3/8"-16 thru 2"-41/2 machine thread Hanger Rod Not
Material: Forged Steel Included
Design Load
Rod Size 650°F (343°C) 750°F (399°C) Approx. Wt./100
Part No. A Lbs. (kN) Lbs. (kN) Lbs. (kg)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 237 B-Line series Pipe Hangers & Supports
Threaded Accessories
B3205 - Threaded Rod (right-hand threads - both ends)
B3205L - Threaded Rod (right & left hand threads) TL
Specify Length
Size Range: 3/8"-16 thru 3"-4 rod ‘L’
Material: Steel
Function: Recommended for use as a hanger support in hanger assemblies. TL
Rod is threaded on both ends with right hand threads of the length shown. Also A
available with left and right hand threads - specify Fig. B3205L when ordering. Thread Size
Maximum Temperature: 750°F (399°C)
Finish: Plain. Contact customer service for alternative finishes and materials.
Order By: Part number, rod size, length and finish
Accessories
Finish: Plain. Contact customer service for alternative finishes and materials.
Threaded
Order By: Part number, rod diameter and finish
Part No. - Size x Length Threads Recommended Load Approx. Wt./100 Ft.
ATR Fig.99 Per Inch Lbs. (kN) Lbs. (kg)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 238 Eaton
Threaded Accessories
TOLCO™ Fig. 98 - Rod Stiffener
TOLCO™ Fig. 98B - Rod Stiffener with Break-Off Bolt Head
Size Range: Secures 3/8"-16 thru 7/8"-9 hanger rod
Material: Steel
Function: Secures channel to hanger rod for vertical seismic bracing.
Slight distortion of the channel (strut) may occur upon installation of
rod stiffeners.
Approvals: Included in our Seismic Restraints Catalog approved
by the State of California Office of Statewide Health Planning and
Development (OSHPD). For additional load, spacing and placement Fig. 98
information relating to OSHPD projects, please refer to the TOLCO
Seismic Restraint Systems Guidelines
Finish: Electro Galvanized. Contact customer service for alternative
finishes and materials.
Weight: Approx. Wt./100: Fig. 98 - 11.8 Lbs. (5.3kg)
Fig. 98B - 12.7 Lbs. (5.7kg)
Order By: Part number
Fig. 98B
SC228B
SC228 - Hanger Rod Stiffener
Size Range: Secures 3/8"-16 thru 5/8"-11 hanger rod
N228WO
Material: Steel
Function: Secures channel to hanger rod for vertical seismic bracing.
3
Slight distortion of the channel (strut) may occur upon installation of /8”-16
rod stiffeners. Threads
11/2"
Finish: Electro Galvanized. Contact customer service for (38.1) SC228BS
alternative finishes and materials.
Weight: Approx. Wt./100: 21.0 Lbs. (9.5kg)
Order By: Part number
Note: Order channel separately
Accessories
Threaded
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 239 B-Line series Pipe Hangers & Supports
Threaded Accessories
TOLCO™ B3214 - Tie Bolt
1” (25.4mm)
Material: Steel Max.
Adapter
Typical Application
Accessories
Threaded
B3213-3/8 x 'L' 3/8"-16 *31/2", 8" (88.9, 203.2) 2" (50.8) 2" (50.8) 390 (1.73)
B3213-1/2 x 'L' 1/2"-13 *31/2", 8" (88.9, 203.2) 21/2" (63.5) 21/2" (63.5) 640 (2.84)
*3/8 x 31/2 and 1/2 x 31/2 will have a coach screw thread length of 2" (50.8) and a rod thread length of 1" (25.4).
Design Load is based on proper installation and solid wood.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 240 Eaton
Threaded Accessories
B3210 - Eye Rod (right-hand threads)
B3210L - Eye Rod (left-hand threads)
B3211 - Welded Eye Rod (right-hand threads)
B3211L - Welded Eye Rod (left-hand threads)
Size Range: 3/8"-16 thru 2"-41/2 rod
Material: Steel
Function: Designed for use as support hanger rod that may be attached directly to structure
or to other pipe support product. The welded eye allows for heavier loads.
Finish: Plain. Contact customer service for alternative finishes and materials.
Eye I.D.
Order By: Part number, rod size, length and finish
Important Note: The Eye I.D. dimension may be larger if needed.
Contact B-line if larger Eye I.D. dimension is required. A
Thread Size
B
Thread Length
Eye I.D.
A
Thread Size
B3211 B
Thread Length
B3210-5/8 x 'L' B3211-5/8 x 'L' 5/8"-11 21/2" (63.5) 3/4" (19.0) 705 (3.13) 2160 (9.61) 1692 (7.52)
B3210-3/4 x 'L' B3211-3/4 x 'L' 3/4"-10 3" (76.2) 7/8" (22.2) 1050 (4.67) 3230 (14.37) 2530 (11.25)
B3210-7/8 x 'L' B3211-7/8 x 'L' 7/8"-9 31/2" (88.9) 1" (25.4) 1470 (6.54) 4480 (19.93) 3508 (15.60)
B3210-1 x 'L' B3211-1 x 'L' 1"-8 4" (101.6) 11/8" (28.6) 1940 (8.63) 5900 (26.24) 4620 (20.55)
B3210-11/8 x 'L' B3211-11/8 x 'L' 11/8"-7 41/2" (114.3) 11/4" (31.7) 2430 (10.81) 7450 (33.14) 5830 (25.93)
B3210-11/4 x 'L' B3211-11/4 x 'L' 11/4"-7 5" (127.0) 13/8" (34.9) 3120 (13.88) 9500 (42.25) 7440 (33.09)
B3210-11/2 x 'L' B3211-11/2 x 'L' 11/2"-6 6" (152.4) 15/8" (41.3) 4650 (20.68) 13800 (61.38) 10807 (48.07)
B3210-13/4 x 'L' B3211-13/4 x 'L' 13/4"-5 7" (177.8) 2" (50.8) 6380 (28.38) 18600 (82.73) 14566 (64.79)
B3210-2 x 'L' B3211-2 x 'L' 2"-41/2 8" (203.2) 21/4" (57.1) 8280 (36.83) 24600 (109.42) 19625 (87.29)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 241 B-Line series Pipe Hangers & Supports
Threaded Accessories
B3210X - Linked Eye Rods (right-hand threads-both ends)
B3210XL - Linked Eye Rods (left-hand & right-hand threads)
B3211X - Linked Welded Eye Rods (right-hand threads-both ends)
B3211XL - Linked Welded Eye Rods (left-hand & right-hand threads)
Size Range: 3/8"-16 thru 2"-41/2 rod
Material: Steel
Function: Designed for use in a hanger assembly where universal movement is necessary.
The welded eye rods allow for heavier loads.
Finish: Plain. Contact customer service for alternative finishes and materials.
Order By: Part number, rod size, and length.
B
Thread Length
A
Thread Size
B3210X Specify Length ‘L’
B
Thread Length
B
Thread Length
A
Thread Size
Specify Length ‘L’
B3211X B
Thread Length
Accessories
B3210X-1/2 x 'L' B3211X-1/2 x 'L' 1/2"-13 21/2" (63.5) 5/8"
Threaded
(15.9) 440 (1.96) 1350 (6.00) 1057 (4.70)
B3210X-5/8 x 'L' B3211X-5/8 x 'L' 5/8"-11 21/2" (63.5) 3/4" (19.0) 705 (3.13) 2160 (9.61) 1692 (7.52)
B3210X-3/4 x 'L' B3211X-3/4 x 'L' 3/4"-10 3" (76.2) 7/8" (22.2) 1050 (4.67) 3230 (14.37) 2530 (11.25)
B3210X-7/8 x 'L' B3211X-7/8 x 'L' 7/8"-9 31/2" (88.9) 1" (25.4) 1470 (6.54) 4480 (19.93) 3508 (15.60)
B3210X-1 x 'L' B3211X-1 x 'L' 1"-8 4" (101.6) 11/8" (28.6) 1940 (8.63) 5900 (26.24) 4620 (20.55)
B3210X-11/8 x 'L' B3211X-11/8 x 'L' 11/8"-7 41/2" (114.3) 11/4" (31.7) 2430 (10.81) 7450 (33.14) 5830 (25.93)
B3210X-11/4 x 'L' B3211X-11/4 x 'L' 11/4"-7 5" (127.0) 13/8" (34.9) 3120 (13.88) 9500 (42.25) 7440 (33.09)
B3210X-11/2 x 'L' B3211X-11/2 x 'L' 11/2"-6 6" (152.4) 15/8" (41.3) 4650 (20.68) 13800 (61.38) 10807 (48.07)
B3210X-13/4 x 'L' B3211X-13/4 x 'L' 13/4"-5 7" (177.8) 2" (50.8) 6380 (28.38) 18600 (82.73) 14566 (64.79)
B3210X-2 x 'L' B3211X-2 x 'L' 2"-41/2 8" (203.2) 21/4" (57.1) 8280 (36.83) 24600 (109.42) 19625 (87.29)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 242 Eaton
Threaded Accessories
B3212 - J-Bolt
Size Range: 3/8"-16 thru 7/8"-19 rod
Radius D A
Material: Steel
Thread Size
Function: Designed to be hooked or hung
from beam flange or purlin. TL
Thread Length
Finish: Plain. Contact customer service for Specify Length ‘L’
alternative finishes and materials.
Order By: Part number, length and finish
DS 16 x 2 - Drive Screw
Material: Steel
Function: Equivalent to a nail, but has greater holding power
Finish: Plain and Electro-Galvanized
Order By: Part number, size and finish
11/2" (38.1) 2.3 (1.0) 6.0 (2.7) 11.8 (5.3) 19.4 (8.8) 32.3 (14.6)
2" (50.8) 2.8 (1.3) 7.0 (3.2) 14.4 (6.5) 23.2 (10.5) 38.3 (17.4)
21/2" (63.5) 3.3 (1.5) 8.3 (3.7) 16.2 (7.3) 27.0 (12.2) 44.0 (19.9)
3" (76.2) 3.9 (1.7) 9.8 (4.4) 18.6 (8.4) 31.0 (14.0) 47.7 (21.6)
31/2" (88.9) 4.4 (2.0) 11.4 (5.2) 21.2 (9.6) 34.8 (15.8) 56.3 (25.5)
4" (101.6) 5.0 (2.2) 12.5 (5.7) 23.3 (10.5) 37.6 (17.0) 58.5 (26.5)
41/2" (114.3) 5.7 (2.6) 14.0 (6.3) 26.1 (11.8) 42.6 (19.3) 64.0 (29.0)
5" (127.0) 6.3 (2.8) 15.4 (7.0) 29.0 (13.1) 45.5 (20.6) 68.0 (30.8)
51/2" (139.7) 7.0 (3.2) 16.4 (7.4) 31.5 (14.3) 49.3 (22.3) 74.0 (33.5)
6" (152.4) 7.4 (3.3) 18.3 (8.3) 34.0 (15.4) 53.0 (24.0) 77.0 (34.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 243 B-Line series Pipe Hangers & Supports
Threaded Accessories
B655 - Steel Rod Coupling
B656 - Steel Reducing Rod Coupling
Accessories
Threaded
B656-7/8 x 3/4 7/8"-9 & 3/4"-10 13/4" (44.4) 3230 (14.37) 39.4 (17.87)
B656
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 244 Eaton
Threaded Accessories
B3220 - Rod Coupling
Hanger Rod
Size Range: 3/8"-16 thru 1"-8 rod Not Included
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 245 B-Line series Pipe Hangers & Supports
Threaded Accessories
B3248 - Steel Washer Plate
C
Size Range: 3/8" thru 1" rod sizes
T
Material: Steel
Function: Heavy duty washer for use on top of channels
or angles to support hanger rod.
A A
Finish: Plain. Contact customer service for alternative
finishes and materials.
Order By: Part number and finish.
Accessories
Threaded
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 246 Eaton
Threaded Accessories
HN - Standard Hex Nut
Size Range: 1/4"-20 thru 7/8"-9
Material: Steel
Finish: Plain or Electro-Galvanized.
Contact customer service for alternative finishes and materials.
Order By: Part number size and finish
HN-1/4 1⁄4"-20 7⁄16" (11.1) 1⁄2" (12.7) 7/32" (5.7) 0.7 (0.3)
HN-3/8 3⁄8"-16 9⁄16" (14.3) 21/32" (16.6) 21/64" (8.3) 1.6 (0.7)
HN-1/2 1⁄2"-13 3⁄4" (19.0) 55/64" (21.8) 7/16" (11.1) 3.7 (1.7)
HN-5/8 5⁄8"-11 15⁄16" (23.8) 13/32" (27.8) 35/64" (13.9) 7.3 (3.3)
HN-3/4 3⁄4"-10 11⁄8" (28.6) 15/16" (33.3) 41/64" (16.3) 12.0 (5.4)
HN-7/8 7⁄8"-9 15⁄16" (33.3) 133/64" (38.5) 3/4" (19.0) 19.0 (8.6)
HHN-1/4 1⁄4"-20 1⁄2" (12.7) 37/64" (14.7) 15/64" (5.9) 1.2 (0.5)
HHN-3/8 3⁄8"-16 11⁄16" (17.5) 51/64" (20.2) 23/64" (9.1) 3.1
Accessories
(1.4)
Threaded
HHN-1/2 1⁄2"-13 7⁄8" (22.2) 11⁄8" (28.6) 31/64" (12.3) 6.5 (2.9)
HHN-5/8 5⁄8"-11 11⁄16" (27.0) 115⁄64" (31.3) 39/64" (15.5) 12.0 (5.4)
HHN-3/4 3⁄4"-10 11⁄4" (31.7) 129⁄64" (36.9) 47/64" (18.6) 19.0 (8.6)
HHN-7/8 7⁄8"-9 17⁄16" (36.5) 121⁄32" (42.6) 55/64" (21.8) 30.0 (13.6)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 247 B-Line series Pipe Hangers & Supports
Threaded Accessories
FW - Flat Washer
Size Range: 1/4"-20 thru 1"-8 rods
Material: Steel
Finish: Plain or Electro-Galvanized.
Contact customer service for alternative finishes and materials.
Order By: Part number size and finish
LW - Lock Washer
Size Range: 1/4"-20 thru 1"-8 rods
Material: Steel
Finish: Plain or Electro-Galvanized.
Note: Available in Hot Dip Galvanized finish or Stainless Steel materials.
Order By: Part number size and finish
Accessories
Threaded
Size Range: 3/8"-16 and 1/2"-13 rods
Material: Steel
Function: To provide a greater bearing surface than standard washer.
Finish: Plain or Electro-Galvanized.
Contact customer service for alternative finishes and materials.
Order By: Part number and size
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 248 Eaton
Threaded Accessories
ATB - Toggle Bolt
Material: Steel
Function: Used with threaded rod in hollow walls
Finish: Electro-Galvanized
Order By: Part number and size
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 249 B-Line series Pipe Hangers & Supports
Threaded Accessories
Accessories
Threaded
To help address the issues of vibration and noise control/dampening vibration in mechanical, refrigeration, HVAC and
electrical installations, Eaton offers the following B-Line series vibration isolation products. It is our continuing effort to offer
the industry quality support system products that meet the demands of today’s construction environment.
The following pages depict vibration isolation and noise control products that are commonly specified and required on
piping, duct and equipment, but not limited to mechanical rooms. As an aid in choosing the proper vibration control
device, the chart shown on the following page is a reference for obtaining Vibration Isolation Efficiency.
Considerations must be given to the desired deflection and the frequency (R.P.M.).
Vibration Isolation is needed when disturbing force magnitudes are expected to be great enough to cause damage or annoyance.
Assumption Fact
Vibration Isolation
1. We know the effects of vibration isolation (efficiency) Formula for calculation shown below.
2. We know the magnitude of the disturbing forces created Equipment manufacturers rarely provide these data.
by the machines These forces are seldom known except in generalities.
3. We know the magnitude of disturbing forces beyond Detailed calculations require so many simplifying assumptions
that the resulting answers have questionable value in addition
to being prohibitively expensive. Reliance is placed on brief
calculations, general rules, and past experience.
Consideration of items 1. and 2. is essential to determine acceptable isolation efficiency. Unfortunately manifold complexities prevent
inclusion of steps for determination of these efficiencies in this document.
1
fn = 188
static deflection (inches)
[
Vibration isolation efficiency % = 100% x 1 -
1
(fd ÷ fn)2 - 1 ]
Transmitted force ft (pounds) ft = fd (100% - isolation efficiency)
Note that fn must be compared to fd for satisfactory isolation efficiency. Also note that the force transmitted can be greater than
the disturbing force when fn is close to or equals fd. This condition is called resonance and is avoided in vibration isolation.
Proper Sizing
Once it is determined as to what type of vibration dampening device is needed, weight loading is the next crucial step.
As a built in safety measure, take the actual weight of supported pipe or equipment (consider all accessories - i.e.
Vibration Isolation
valves, insulation, brackets, etc...) and multiply by 1.25. Then refer to the sizing chart for the selected product to
determine part number.
Sizing: Divide weight of equipment by points of support to determine load requirement per support.
Example: 240 Lb. (90.7 kg) piece of equipment, 4 support points, take 240 x 1.25 = 300 Lbs. (136.1kg) (safety
measure), then take 300 ÷ 4 = 75 Lbs. (34.0 kg) Specify appropriate vibration device rated at
75 Lbs. (34.0 kg) for each of the support points.
If weight of equipment is unequally proportionate, select mounts to satisfy the weight distribution.
1 1
fn = 188 Transmissibility =
static deflection (inches) (fd ÷ fn)2 - 1
3 HX = 180 cpm = 1.1” Deflection
fd Disturbing Frequency - (cycles per minute)
fn Natural Frequency of Isolation System
Critical Installations
96% to 99% Vibration Isolation Efficiency recommended (only 1% to 4% of disturbing vibration transmitted).
Standard Installations
90% to 95% Vibration Isolation Efficiency recommended (only 5% to 10% of disturbing vibration transmitted).
Non-Critical Installations
75% to 89% Vibration Isolation Efficiency recommended (only 11% to 24% of disturbing vibration transmitted).
Vibration Isolation
For 1/4" (6.3mm) deflection: Specify B-Line series RM and RQ Neoprene Mountings or B-Line series RH Neoprene Hangers.
For 1/2" (12.7mm) deflection: Specify B-Line series RMD and RQD, (or JQTN fo OSHPD pre-approved) Neoprene Mountings or B-
Line series RHD Neoprene Hangers.
For 1"-2" (25.4mm-50.8mm) deflection: Specify B-Line series CHSCS, CH30SCS, HHSCS, and HH30SCS Housed Spring Mountings.
3/8"
(9.5)
L W
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 254 Eaton
Vibration Isolation
CNP Type - Cork and Ribbed Neoprene Vibration Pad
Use: Is used under equipment to dampen noise and vibration in floor caused by medium and high speed equipment.
1"
(25.4)
L W
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 255 B-Line series Pipe Hangers & Supports
Vibration Isolation
CNNK Type - Cork, Ribbed Neoprene and Steel Vibration Pad
Use: Is used to dampen noise and vibration in floor caused by medium and high speed equipment.
13/16" (20.6)
dia. hole
11/2”
(38.1)
W
L
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 256 Eaton
Vibration Isolation
VRP Type - Rubber Cube Vibration Pad
Use: Is used to dampen noise and vibration in floor caused by medium and high speed equipment.
VRP-16
VRP-36
VRP-324
3/4”
2”
(50.8) (19.0)
2”
(50.8)
VRP-324 shown
L
Vibration Isolation
VRP-4 180 (.80) 2" (50.8) 2" (50.8) Bulk .10 (.05)
VRP-16 720 (3.20) 4" (101.6) 4" (101.6) Bulk .41 (.19)
VRP-36 1620 (7.20) 6" (152.4) 6" (152.4) Bulk .90 (.41)
VRP-324 14580 (64.85) 18" (457.2) 18" (457.2) 3 8.15 (3.70)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 257 B-Line series Pipe Hangers & Supports
Vibration Isolation
BVS Type - Vibra Strip™ for 15/8" (41.3mm) wide Eaton B-Line series channel
Use: Dampen noise and vibration of equipment when mounted on strut.
BVS-120
Vibration Isolation
Max. Load
Lbs. per Wt.
Part Lineal In. Length Std. Each
No. Lbs. (kg/25.4 mm) in. (mm) Pkg. Lbs. (kg)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 258 Eaton
Vibration Isolation
RM & RM-D Type - Neoprene Mount
Use: To minimize or prevent noise and vibration from transferring between equipment and floor or solid support structure.
Typical applications include air handling units, air conditioners, compressors, pumps, machine tools, motors, business
machines, transformers, furnaces, etc.
L
S
K W
1/4" (6.3)
O
Deflection T
(thread)
J
H
1/2" (12.7) RM - 80 A
Deflection
Type Load Mount Size
RM Series for 1/4” (6.3mm) Deflection RM-D Series for 1/2” (12.7mm) Deflection
Part Mount Maximum Color Part Mount Maximum Color
No. Size Load Code No. Size Load Code
Lbs. (kN) Lbs. (kN)
Dimensions
Vibration Isolation
L S W O T K H J
Mount RM RM-D RM RM-D
Size in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
A 33/16 (81.0) 23/8 (27.8) 113/16 (47.5) 11/32 (8.7) 5/16”-18 11/4 (31.7) 1 (25.4) 11/2 (38.1) 13/16 (20.6) 15/16 (33.3)
B 37/8 (98.4) 3 (76.2) 23/8 (60.3) 11/32 (8.7) 3/8”-16 13/4 (44.4) 11/4 (31.7) 113/16 (46.0) 11/32 (26.2) 19/16 (39.7)
C 51/2 (134.7) 41/8 (104.8) 31/4 (82.5) 9/16 (14.3) 1/2”-13 21/2 (63.5) 11/2 (38.1) 21/2 (63.5) 11/4 (31.7) 21/4 (57.1)
F 71/2 (190.5) 61/8 (155.6) 47/8 (123.8) 9/16 (14.3) 5/8”-11 43/8 (111.1) 15/8 (41.3) 23/4 (69.8) 13/8 (34.9) 21/2 (63.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 259 B-Line series Pipe Hangers & Supports
Vibration Isolation
OS Type - Steel Spring Isolator/Restraint - 1” (25.4mm) & 2” (50.8mm) Deflection
Use: To support and isolation of vibrations between equipment or frame mounted equipment and the floor or
supporting structure
Style V Style R
Mounting Holes
Style V - shown H diameter
W Style R -
Motion
Restraint For Attachment To
Adjustment M Side Of Equipment
1”
L (25.4)
Option P -
Neoprene Pad
Stud Regardless Of Style
D diameter
OS A - R - E500 P
Type
Style V - OSE 4 Spring Housing Size
Style V or R
Part Numbers - E Springs - 1” (25.4mm) Deflection Spring Number
Neoprene Base Option
Housing Size
A B E
OSA-(*)-E21(**) OSB-(*)-ET255(**) OSE-(*)-E976(**) Part Numbers - F Springs - 2” (50.8mm) Deflection
OSA-(*)-E55(**) OSB-(*)-ET347(**) OSE-(*)-E1272(**) Housing Size
OSA-(*)-E79(**) OSB-(*)-ET473(**) OSE-(*)-E1660(**) A B E F
OSA-(*)-E106(**) OSB-(*)-E630(**) OSE-(*)-E2000(**) OSA-(*)-F33(**) OSB-(*)-FT121(**) OSE-(*)-F332(**) OSF-(*)-F1159(**)
OSA-(*)-E143(**) OSB-(*)-E806(**) OSE-(*)-E2532(**) OSA-(*)-F43(**) OSB-(*)-FT171(**) OSE-(*)-F480(**) OSF-(*)-F1408(**)
OSA-(*)-E187(**) OSB-(*)-E1030(**) OSE-(*)-E3204(**) OSA-(*)-F59(**) OSB-(*)-FT241(**) OSE-(*)-F620(**) OSF-(*)-F1710(**)
OSA-(*)-E244(**) OSB-(*)-E1230(**) OSE-(*)-E4128(**) OSA-(*)-F83(**) OSB-(*)-F348(**) OSE-(*)-F780(**) OSF-(*)-F2149(**)
OSA-(*)-E318(**) OSB-(*)-E1430(**) OSA-(*)-F120(**) OSB-(*)-F453(**) OSE-(*)-F944(**) OSF-(*)-F2700(**)
OSA-(*)-E415(**) OSB-(*)-E1810(**) OSA-(*)-F155(**) OSB-(*)-F590(**) OSE-(*)-F1200(**)
OSA-(*)-E500(**) OSB-(*)-E2210(**) OSA-(*)-F195(**) OSB-(*)-F676(**)
OSA-(*)-E633(**) OSA-(*)-F236(**) OSB-(*)-F787(**)
OSA-(*)-E801(**) OSA-(*)-F300(**) OSB-(*)-F918(**)
(*) Insert Style V or R (*) Insert Style V or R
(**) Insert Option P when required (**) Insert Option P when required
Vibration Isolation
Dimensions
Housing L M T W D H Approx.
Size Oper. Height
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
A 7 (177.8) 6 (152.4) 23/4 (69.8) 2 (50.8) 3/8 (9.5) 9/16 (14.3) 41/2 (114.3)
B 101/2 (266.7) 9 (228.6) 4 (101.6) 31/2 (88.9) 1/2 (12.7) 11/16 (17.5) 51/2 (139.7)
E 14 (355.6) 12 (304.8) 6 (152.4) 5 (127.0) 5/8 (15.9) 11/16 (17.5) 5 (127.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 260 Eaton
Vibration Isolation
OS Type - Steel Spring Isolator/Restraint - 3” (76.2mm) Deflection
Use: To support and isolation of vibrations between equipment or frame mounted equipment and the floor or
supporting structure.
Motion
Restraint
Adjustment W
L
Load Transfer
Adjustment
1”
T Stud (25.4) Style R -
D diameter For Attachment To
Opposite Side Of
Equipment
Oper. Height
Option P -
Neoprene Pad
Style V Regardless Of Style
Dimensions
Housing L W M T D Approx.
Size Oper. Height
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
OSB 101/2 (266.7) 31/2 (88.9) 9 (228.6) 4 (101.6) 1/2 (12.7) 51/2 (139.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 261 B-Line series Pipe Hangers & Supports
Vibration Isolation
JQ Type - Isolator/Restraints - 1” (25.4mm) Deflection
with California Pre-Approved Seismic Protection OPA-0070
Use: To support and isolation of vibrations between equipment or
frame mounted equipment and the floor or supporting structure. Style R JQBX
Pre-approved for state of California health care projects (OSHPD) shown
L
Motion Load Transfer
Restraint Adjustment Stud 1” 1”
T (25.4) (25.4)
Adjustment D diameter
Shear
Oper. Height Panels
Style R - JQBX only Style Q -
JQE 4 Spring Housing JQA, JQB, & JQBX For Attachment To For Attachment To
Option P -
Opposite Side Of Opposite Side Of
Style V Neoprene Pad
Equipment Equipment
Regardless Of Style
Dimensions
Housing L W M T D Approx.
Size Oper. Height
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
JQA 7 (177.8) 2 (50.8) 6 (152.4) 23/4 (69.8) 3/8 (9.5) 41/2 (114.3)
JQB/JQBX 101/2 (266.7) 31/2 (88.9) 9 (228.6) 4 (101.6) 1/2 (12.7) 51/2 (139.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 262 Eaton
Vibration Isolation
JQ Type - Isolator/Restraints - 2” (50.8mm) Deflection
with California Pre-Approved Seismic Protection OPA-0070
Use: To support and isolation of vibrations between equipment or frame
mounted equipment and the floor or supporting structure. Front and Rear
Pre-approved for state of California health care projects (OSHPD) Shear Panels
JQBX only
• Neoprene pad 1/4” (6.3mm) thick under spring
regardless of style Style R
JQBX
• All JQ Type isolator/restraints feature large diameter shown
springs with O.D. not less than 80% of rated
deflection height
• Adjust load transfer while motion restraint
adjustments are loose Mounting Holes
9/16” (14.3) diameter for JQA
• For compact support of heavy loads, some JQ 11/16” (17.5) diameter for JQB, JQBX, JQE, JQF
include inner springs. For lower profile support of
heavy loads when required, JQE’s have Style R -
clustered springs W For Attachment
To Side Of
• Housings are HDG with Zinc Plated hardware Equipment
Springs are Zinc Plated or Powder Coated M 1”
(25.4)
L
Motion
Restraint Stud T
Adjustment D diameter
Option P -
Neoprene Pad
Oper. Height Regardless Of Style
Dimensions
Housing L W M T D Approx.
Size Oper. Height
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
JQA 7 (177.8) 2 (50.8) 6 (152.4) 23/4 (69.8) 3/8 (9.5) 41/2 (114.3)
JQB/JQBX 101/2 (266.7) 31/2 (88.9) 9 (228.6) 4 (101.6) 1/2 (12.7) 51/2 (139.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 263 B-Line series Pipe Hangers & Supports
Vibration Isolation
JQ Type - Isolator/Restraints - 3” (76.2mm) Deflection
with California Pre-Approved Seismic Protection OPA-0070
Use: For compact support or low profile support of heavy loads.
Pre-approved for state of California health care projects (OSHPD)
Style R - Style Q -
W For Attachment For Attachment
To Opposite Side To Opposite Side
Stud Of Equipment Of Equipment
T M 1” 1”
Load Transfer D diameter
(25.4) (25.4)
Adjustment L
Shear
Oper. Height Panels
JQBX
only
JQB, JQBX, & JQF
Option P -
Style V Neoprene Pad
Regardless Of Style
Dimensions
Housing L W M T D Approx.
Size Oper. Height
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
JQB/JQBX 101/2 (266.7) 31/2 (88.9) 9 (228.6) 4 (101.6) 1/2 (12.7) 51/2 (139.7)
JQF 14 (355.6) 5 (127.0) 12 (304.8) 6 (152.4) 5/8 (15.9) 8 (203.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 264 Eaton
Vibration Isolation
JQ-TQN Type - Top Quality Neoprene Isolator/Restraints - 1/2” (12.7mm) Deflection
with California Pre-Approved Seismic Protection OPA-0070
Use: For support of light equipment or framed equipment and isolation with a cushion to prevent vibration transference
to structure. Pre-approved for state of California health care projects (OSHPD)
Panel
Panels
JQB No
JQBX Yes
L
TQN
Top Quality
Neoprene
Vibration Isolation
Style V Style R
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 265 B-Line series Pipe Hangers & Supports
Vibration Isolation
JQ-TQN Type - Top Quality Neoprene Isolator/Restraints - 1/2” (12.7mm) Deflection con’t.
with California Pre-Approved Seismic Protection OPA-0070
Dimensions
Housing L W M F D Approx.
Size Oper. Height
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
Vibration Isolation
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 266 Eaton
Vibration Isolation
RQ & RQD Type - Neoprene Mount with Integrak Seismic Restraints
Use: For support of light equipment or framed light equipment while
preventing transfer of vibration to structure
R - Rod Size
Neoprene
Washer
RQ
D RQD
No Metal To
H Metal Contact
J A
Typical Part Numbering
L
RQ - A130
Type
Mount Number
Dimensions
Neoprene A B C D L J R H
Type in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
RQ-A 31/2 (88.9) 2 (50.8) 1 (25.4) 7/16 (11.1) 41/2 (114.3) 1 (25.4) 3/8”-16 2 (50.8)
RQ-B 45/16 (109.5) 21/2 (63.5) 11/4 (31.7) 9/16 (14.3) 53/8 (136.5) 11/2 (38.1) 5/8”-11 23/4 (69.8)
Vibration Isolation
RQ-C 5 (127.0) 31/4 (82.5) 15/8 (41.3) 11/16 (17.5) 63/16 (157.2) 17/8 (47.6) 3/4”-10 33/8 (85.7)
RQD-A 31/2 (88.9) 2 (50.8) 1 (25.4) 7/16 (11.1) 41/2 (114.3) 1 (25.4) 3/8”-16 2 (50.8)
RQD-B 45/16 (109.5) 21/2 (63.5) 11/4 (31.7) 9/16 (14.3) 53/8 (136.5) 11/2 (38.1) 5/8”-11 23/4 (69.8)
RQD-C 5 (127.0) 31/4 (82.5) 15/8 (41.3) 11/16 (17.5) 63/16 (157.2) 17/8 (47.6) 3/4”-10 33/8 (85.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 267 B-Line series Pipe Hangers & Supports
Vibration Isolation
Reference Tables
Selection based on water filled pipe only. Add weight of fittings if any and reselect.
10 (250) 330 (149.7) 455 (206.4) 475 (215.4) 245 (111.1) 295 (133.8) 53 (24.0)
12 (300) 440 (199.6) 675 (306.2) 690 (313.0) 375 (54.4) 405 (183.7) 71 (32.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 268 Eaton
Vibration Isolation
RH & RHD Type - Neoprene Hanger
Use: Used to dampen noise and vibration from suspended high speed equipment. To be used with all thread
rod for single and trapeze type support systems.
RHD-E 1”-8 MRD
• *Type RH: Single deflection - 1/4” (6.3mm) maximum shown
• **Type RHD: Double deflection - 1/2” (12.7mm) maximum
• MRD is maximum rod diameter
• Housing finish: Zinc Plated
• Threaded rods, nuts, and washers are furnished separately
63/8”
(161.9)
3/4”-10 MRD
RHD-B
shown
43/4”
(120.6) C5x6.7#
3/8”-16
RH-C & RHD-C
MRD RH-A & RHD-A 7/8”-9 MRD shown
shown
*1” *11/2”
(25.4) (38.1)
31/4” 51/4”
**11/2” (82.5) (133.1)
**21/2”
(38.1) (63.5)
1/4” (6.3mm) Maximum Single Deflection 1/2” (12.7mm) Maximum Double Deflection
(1.08) (1.08)
RH-300-C 300 (1.41) Yellow RHD-300-C 300 (1.41) Yellow
RH-520-C 520 (1.75) Green RHD-520-C 520 (1.75) Green
RH-750-C 750 (2.27) Blue RHD-750-C 750 (2.27) Blue
RH-1100-C 1100 (31.8) White RHD-1100-C 1100 (31.8) White
RHD-1700-E 1700 (4.71) Green
RHD-2700-E 2700 (6.76) Blue
RHD-4200-E 4200 (8.72) White
• All housing sizes have been tested to carry five times the
maximum load without failure
• Spring rated deflection is 1” (25.4mm)
• SFH = Free Height
• Threaded rod, nuts, and washers supplied separately
• * Housings are specially reinforced for extra strength
*Extra Strength Hanger
Basic Hanger CHSCS-E1580 thru CHSCS-E2860
CHSCS-E500 thru CHSCS-E1060
L Seismic Cushion
Light Weight Hanger Seismic Cushion W Stop (SCS)
CHSCS-E21 thru CHSCS-E415 Stop (SCS) Upper Long Life
Upper Long Life Rubber Cushion
Seismic Cushion Rubber Cushion
W L
Stop (SCS)
Upper Long Life
Rubber Cushion
S S
S
W L
Dimensions
Type CHSCS-E21 21 (0.09) 25/8 (66.7) 43/4 (120.6) 23/4 (69.8) 21/2 (63.5) 23/8 (60.3) 3/8”-16
Load CHSCS-E55 55 (0.24) 23/4 (69.8) 43/4 (120.6) 23/4 (69.8) 21/2 (63.5) 23/8 (60.3) 3/8”-16
CHSCS-E79 79 (0.35) 25/8 (66.7) 43/4 (120.6) 23/4 (69.8) 21/2 (63.5) 23/8 (60.3) 3/8”-16
CHSCS-E106 106 (0.47) 25/8 (66.7) 43/4 (120.6) 23/4 (69.8) 21/2 (63.5) 23/8 (60.3) 3/8”-16
CHSCS-E143 143 (0.63) 25/8 (66.7) 43/4 (120.6) 23/4 (69.8) 21/2 (63.5) 23/8 (60.3) 1/2”-13
CHSCS-E187 187 (0.83) 25/8 (66.7) 43/4 (120.6) 23/4 (69.8) 21/2 (63.5) 23/8 (60.3) 1/2”-13
CHSCS-E244 244 (1.08) 23/4 (69.8) 43/4 (120.6) 23/4 (69.8) 21/2 (63.5) 23/8 (60.3) 1/2”-13
CHSCS-E318 318 (1.41) 31/8 (79.4) 43/4 (120.6) 23/4 (69.8) 21/2 (63.5) 23/8 (60.3) 5/8”-11
CHSCS-E415 415 (1.84) 31/16 (77.8) 43/4 (120.6) 23/4 (69.8) 21/2 (63.5) 23/8 (60.3) 5/8”-11
CHSCS-E500 500 (2.22) 31/4 (82.5) 71/2 (190.5) 31/4 (82.5) 23/4 (69.8) 3 (76.2) 3/4”-10
Vibration Isolation
CHSCS-715 715 (3.18) 41/4 (107.9) 71/2 (190.5) 31/4 (82.5) 23/4 (69.8) 3 (76.2) 3/4”-10
CHSCS-1060 1060 (4.71) 41/4 (107.9) 71/2 (190.5) 31/4 (82.5) 23/4 (69.8) 3 (76.2) 3/4”-10
CHSCS-1430 * 1430 (6.36) 41/4 (107.9) 83/8 (212.7) 6 (152.4) 6 (152.4) 3 (76.2) 7/8”-9
CHSCS-2120 * 2120 (9.43) 41/4 (107.9) 83/8 (212.7) 6 (152.4) 6 (152.4) 3 (76.2) 7/8”-9
CHSCS-2860 * 2860 (12.72) 41/4 (107.9) 83/8 (212.7) 6 (152.4) 6 (152.4) 3 (76.2) 7/8”-9
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 270 Eaton
Vibration Isolation
CHSCS Type - Spring Hanger with Seismic Cushion Stop - 2” (50.8mm) Deflection
Use: Used to dampen noise and vibration from suspended high speed equipment. To be used with all thread
rod for single and trapeze type support systems.
• All housing sizes have been tested to carry five times the
maximum load without failure
• Spring rated deflection is 2” (50.8mm)
• SFH = Free Height
*Extra Strength Hanger
• Threaded rod, nuts, and washers supplied separately CHSCS-F1159 thru CHSCS-F3420
• * Housings are specially reinforced for extra strength
Seismic Cushion
Stop (SCS)
Basic Hanger Upper Long Life
CHSCS-F59 thru CHSCS-F918 Rubber Cushion
L
Seismic Cushion W
Stop (SCS)
Upper Long Life
Rubber Cushion
S
S
Seismic Cushion
Stop (SCS)
Lower Long Life
Rubber Cushion
D Bonded To Steel Plate
L
Seismic Cushion W
Stop (SCS)
Lower Long Life
Rubber Cushion
D Bonded To Steel Plate
Dimensions
Type CHSCS-F59 59 (0.26) 41/4 (107.9) 9 (228.6) 3 (76.2) 21/2 (63.5) 23/8 (60.3) 1/2”-13
Load CHSCS-F83 83 (0.37) 41/4 (107.9) 9 (228.6) 3 (76.2) 21/2 (63.5) 23/8 (60.3) 1/2”-13
CHSCS-F120 120 (0.53) 41/4 (107.9) 9 (228.6) 3 (76.2) 21/2 (63.5) 23/8 (60.3) 1/2”-13
CHSCS-F155 155 (0.69) 41/4 (107.9) 9 (228.6) 3 (76.2) 21/2 (63.5) 23/8 (60.3) 1/2”-13
CHSCS-F195 195 (0.87) 49/16 (115.9) 9 (228.6) 3 (76.2) 21/2 (63.5) 23/8 (60.3) 1/2”-13
CHSCS-F241 241 (1.07) 41/2 (114.3) 10 (254.0) 51/2 (139.7) 41/2 (114.3) 23/8 (60.3) 1/2”-13
CHSCS-F348 348 (1.55) 5 (127.0) 10 (254.0) 51/2 (139.7) 41/2 (114.3) 23/8 (60.3) 5/8”-11
CHSCS-F453 453 (2.01) 5 (127.0) 10 (254.0) 51/2 (139.7) 41/2 (114.3) 23/8 (60.3) 5/8”-11
CHSCS-F590 590 (2.62) 5 (127.0) 11 (279.4) 51/4 (133.3) 41/2 (114.3) 23/8 (60.3) 3/4”-10
CHSCS-F676 676 (3.00) 5 (127.0) 11 (279.4) 51/4 (133.3) 41/2 (114.3) 23/8 (60.3) 3/4”-10
Vibration Isolation
CHSCS-F787 787 (3.50) 5 (127.0) 11 (279.4) 51/4 (133.3) 41/2 (114.3) 23/8 (60.3) 3/4”-10
CHSCS-F918 918 (4.08) 5 (127.0) 11 (279.4) 51/4 (133.3) 41/2 (114.3) 23/8 (60.3) 3/4”-10
CHSCS-F1159 * 1159 (5.15) 67/16 (163.5) 11 (279.4) 6 (152.9) 5 (127.0) 3 (76.2) 3/4”-10
CHSCS-F1408 * 1408 (6.26) 67/16 (163.5) 11 (279.4) 6 (152.9) 5 (127.0) 3 (76.2) 7/8”-9
CHSCS-F1710 * 1710 (7.60) 67/16 (163.5) 11 (279.4) 6 (152.9) 5 (127.0) 3 (76.2) 7/8”-9
CHSCS-F2318 * 2318 (10.31) 67/16 (163.5) 111/4 (285.7) 11 (279.4) 5 (127.0) 3 (76.2) 7/8”-9
CHSCS-F2816 * 2816 (12.52) 67/16 (163.5) 111/4 (285.7) 11 (279.4) 5 (127.0) 3 (76.2) 7/8”-9
CHSCS-F3420 * 3420 (15.21) 67/16 (163.5) 111/4 (285.7) 11 (279.4) 5 (127.0) 3 (76.2) 7/8”-9
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 271 B-Line series Pipe Hangers & Supports
Vibration Isolation
CH30SCS Type - 15° Tilt, 1” (25.4mm) Deflection Combination Hanger - Spring & Neoprene
with Seismic Cushion Stop
Use: Used to dampen noise and minor vibration from suspended high speed equipment. To be used with all thread
rod for single and trapeze type support systems.Used where uncertain alignment is anticipated during installation.
At rated load the hanger rod will operate to a full 15° tilt in any direction from vertical centerline.
• All housing sizes have been tested to carry five times the *Extra Strength Hanger
maximum load without failure CH30SCS-E1612 thru CH30SCS-E4920
• Spring rated deflection is 1” (25.4mm) SCS (T)
• SFH = Free Height
• Threaded rod, nuts, and washers supplied separately
• * Housings are specially reinforced for extra strength
Basic Hanger
Light Weight Hanger CH30SCS-ET347 thru
CH30SCS-ET20 thru CH30SCS-ET1326 S
CH30SCS-ET255
SCS (T)
SCS (T) See
Neoprene
Sleeve S
Detail See
Neoprene SCS
S Sleeve W
Detail (B)
SCS (B)
L D
L
L W SCS (B) Spring Channel
W
D D
Cushion CH30SCS-ET80 80 (0.35) 21/8 (54.0) 43/4 (120.6) 35/8 (92.1) 21/2 (63.5) 23/8 (60.3) 1/2”-13
CH30SCS-ET129 129 (0.57) 23/8 (60.3) 43/4 (120.6) 35/8 (92.1) 21/2 (63.5) 23/8 (60.3) 1/2”-13
SCS (B) = CH30SCS-ET194 194 (0.86) 23/8 (60.3) 43/4 (120.6) 35/8 (92.1) 21/2 (63.5) 23/8 (60.3) 1/2”-13
Seismic Cushion Stop (SCS)
Lower Long Life Rubber CH30SCS-ET255 255 (1.13) 21/2 (63.5) 43/4 (120.6) 35/8 (92.1) 21/2 (63.5) 23/8 (60.3) 1/2”-13
Cushion CH30SCS-ET347 347 (1.54) 23/4 (69.8) 6 (152.9) 55/16 (134.9) 41/4 (107.9) 23/8 (60.3) 5/8”-11
Bonded To Steel Plate CH30SCS-ET473 473 (2.10) 27/8 (73.0) 6 (152.9) 55/16 (134.9) 41/4 (107.9) 23/8 (60.3) 5/8”-11
CH30SCS-ET667 667 (2.96) 31/8 (79.4) 7 (177.8) 57/8 (149.2) 43/4 (120.6) 3 (76.2) 3/4”-10
Vibration Isolation
CH30SCS-ET940 940 (4.18) 33/8 (85.7) 7 (177.8) 57/8 (149.2) 43/4 (120.6) 3 (76.2) 3/4”-10
CH30SCS-ET1326 1326 (5.90) 35/8 (92.1) 7 (177.8) 57/8 (149.2) 43/4 (120.6) 3 (76.2) 7/8”-9
CH30SCS-E1612 * 1612 (7.17) 35/8 (92.1) 81/4 (209.5) 10 (254.0) 4 (101.6) 3 (76.2) 7/8”-9
CH30SCS-E2060 * 2060 (9.16) 37/8 (98.4) 81/4 (209.5) 10 (254.0) 4 (101.6) 3 (76.2) 1”-8
CH30SCS-E2460 * 2460 (10.94) 41/8 (104.8) 81/4 (209.5) 10 (254.0) 4 (101.6) 3 (76.2) 1”-8
CH30SCS-E2980 * 2980 (13.25) 41/8 (104.8) 81/4 (209.5) 10 (254.0) 4 (101.6) 3 (76.2) 1”-8
CH30SCS-E4120 * 4120 (18.32) 37/8 (98.4) 81/2 (215.9) 91/2 (241.3) 7 (177.8) 4 (101.6) 11/8”-7
CH30SCS-E4920 * 4920 (21.88) 41/8 (104.8) 81/2 (215.9) 91/2 (241.3) 7 (177.8) 4 (101.6) 11/8”-7
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 272 Eaton
Vibration Isolation
CH30SCS Type - 15° Tilt, 2” (50.8mm) Deflection Spring Hanger with Seismic Cushion Stop
Use: Used to dampen noise and minor vibration from suspended high speed equipment. To be used with all thread
rod for single and trapeze type support systems.Used where uncertain alignment is anticipated during installation.
At rated load the hanger rod will operate to a full 15° tilt in any direction from vertical centerline.
• All housing sizes have been tested to carry five times the *Extra Strength Hanger
maximum load without failure CH30SCS-F696 thru CH30SCS-F3420
Basic Hanger
CH30SCS-FT30 thru CH30SCS-F590
SCS (T)
S
SCS
(B)
S
See See
Neoprene Neoprene W
Sleeve Sleeve
Detail Detail
L
L SCS (B)
D
W Spring
D Channel
CH30SCS-FT60 60 (0.26) 33/4 (95.2) 61/2 (165.1) 35/8 (92.1) 21/2 (63.5) 23/8 (60.3) 1/2”-13
SCS (B) = CH30SCS-FT85 85 (0.38) 33/4 (95.2) 61/2 (165.1) 35/8 (92.1) 21/2 (63.5) 23/8 (60.3) 1/2”-13
Seismic Cushion Stop (SCS) CH30SCS-FT121 121 (0.54) 4 (101.6) 8 (203.2) 5 (127.0) 4 (101.6) 23/8 (60.3) 1/2”-13
Lower Long Life Rubber Cushion
Bonded To Steel Plate CH30SCS-FT171 171 (0.76) 41/4 (107.9) 8 (203.2) 51/4 (133.3) 41/2 (114.3) 3 (76.2) 1/2”-13
CH30SCS-FT241 241 (1.07) 41/2 (114.3) 8 (203.2) 51/4 (133.3) 41/2 (114.3) 3 (76.2) 1/2”-13
CH30SCS-F348 348 (1.55) 5 (127.0) 8 (203.2) 51/4 (133.3) 41/2 (114.3) 3 (76.2) 5/8”-11
CH30SCS-F453 453 (2.01) 5 (127.0) 8 (203.2) 51/4 (133.3) 41/2 (114.3) 3 (76.2) 5/8”-11
CH30SCS-F590 590 (2.62) 5 (127.0) 8 (203.2) 51/4 (133.3) 41/2 (114.3) 3 (76.2) 3/4”-10
Vibration Isolation
CH30SCS-F696 * 696 (3.09) 5 (127.0) 9 (228.6) 103/8 (263.5) 4 (101.6) 3 (76.2) 3/4”-10
CH30SCS-F906 * 906 (4.03) 5 (127.0) 9 (228.6) 103/8 (263.5) 4 (101.6) 3 (76.2) 3/4”-10
CH30SCS-F1180 * 1180 (5.25) 5 (127.0) 9 (228.6) 103/8 (263.5) 4 (101.6) 3 (76.2) 3/4”-10
CH30SCS-F1352 * 1352 (6.01) 5 (127.0) 9 (228.6) 103/8 (263.5) 4 (101.6) 3 (76.2) 7/8”-9
CH30SCS-F1574 * 1574 (7.00) 5 (127.0) 9 (228.6) 103/8 (263.5) 4 (101.6) 3 (76.2) 7/8”-9
CH30SCS-F1836 * 1836 (8.16) 5 (127.0) 9 (228.6) 103/8 (263.5) 4 (101.6) 3 (76.2) 7/8”-9
CH30SCS-F2318 * 2318 (10.31) 61/2 (165.1) 111/2 (292.1) 123/8 (314.3) 5 (127.0) 4 (101.6) 7/8”-9
CH30SCS-F2816 * 2816 (12.52) 61/2 (165.1) 111/2 (292.1) 123/8 (314.3) 5 (127.0) 4 (101.6) 7/8”-9
CH30SCS-F3420 * 3420 (15.21) 61/2 (165.1) 111/2 (292.1) 123/8 (314.3) 5 (127.0) 4 (101.6) 7/8”-9
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 273 B-Line series Pipe Hangers & Supports
Vibration Isolation
HHSCS Type - Combination Hanger Spring & Neoprene with Seismic Cushion Stop -
11/2” (38.1mm) Deflection
Use: Used to dampen noise and minor vibration from suspended high speed equipment. To be used with all thread
rod for single and trapeze type support systems.Used where uncertain alignment is anticipated during installation.
At rated load the hanger rod will operate to a full 15° tilt in any direction from vertical centerline.
• All housing sizes have been tested to carry five times the
maximum load without failure *Extra Strength Hanger
• Spring rated deflection is 2” (50.8mm) + neoprene rated HHSCS-E1580 thru HHSCS-E2860
deflection is 1/2” (12.7mm) = 21/2” (63.5mm) Seismic Cushion Stop (SCS)
• SFH = Free Height NFH = Neoprene Free Height Upper Long Life Rubber Cushion
• Threaded rod, nuts, and washers supplied separately
• * Housings are specially reinforced for extra strength
• Minimum additional travel is 50% of rated deflection at rated load
Basic Hanger S
HHSCS-E21 thru HHSCS-E1060
L
W
Seismic Cushion
Stop (SCS) Deflection
Upper Long Life Indicator W L
Rubber Cushion Option I
Deflection S
Indicator Pre-Compression
Option I Plate, Rod, Nuts, D
and Washers
Option R
Typical Part Numbering
HHSCS E106 R I
Type
Pre-Compression
Plate, Rod, Nuts,
Spring Load
and Washers D Pre-Compression Option
Option R Deflector Indicator Option
Dimensions
HHSCS-E55-R I 55 (0.24) 23/4 (69.8) 11/2 (38.1) 61/2 (165.1) 35/8 (92.1) 21/2 (63.5) 23/8 (60.3) 3/8”-16
HHSCS-E79-R I 79 (0.35) 25/8 (66.7) 11/2 (38.1) 61/2 (165.1) 35/8 (92.1) 21/2 (63.5) 23/8 (60.3) 3/8”-16
HHSCS-E106-R I 106 (0.47) 25/8 (66.7) 11/2 (38.1) 61/2 (165.1) 35/8 (92.1) 21/2 (63.5) 23/8 (60.3) 3/8”-16
HHSCS-E143-R I 143 (0.63) 25/8 (66.7) 11/2 (38.1) 61/2 (165.1) 35/8 (92.1) 21/2 (63.5) 23/8 (60.3) 1/2”-13
HHSCS-E187-R I 187 (0.83) 25/8 (66.7) 13/4 (44.4) 71/2 (190.5) 31/4 (82.5) 23/4 (69.8) 23/8 (60.3) 1/2”-13
HHSCS-E244-R I 244 (1.08) 23/4 (69.8) 13/4 (44.4) 71/2 (190.5) 31/4 (82.5) 23/4 (69.8) 23/8 (60.3) 1/2”-13
HHSCS-E318-R I 318 (1.41) 31/8 (79.4) 13/4 (44.4) 71/2 (190.5) 31/4 (82.5) 23/4 (69.8) 23/8 (60.3) 5/8”-11
HHSCS-E415-R I 415 (1.84) 31/16 (77.8) 13/4 (44.4) 71/2 (190.5) 31/4 (82.5) 23/4 (69.8) 23/8 (60.3) 5/8”-11
Vibration Isolation
HHSCS-E500-R I 500 (2.22) 31/4 (82.5) 21/2 (63.5) 93/4 (247.6) 37/8 (98.4) 31/4 (82.5) 23/8 (60.3) 3/4”-10
HHSCS-715-R I 715 (3.18) 41/4 (107.9) 21/2 (63.5) 93/4 (247.6) 37/8 (98.4) 31/4 (82.5) 23/8 (60.3) 3/4”-10
HHSCS-1060-R I 1060 (4.71) 41/4 (107.9) 21/2 (63.5) 93/4 (247.6) 37/8 (98.4) 31/4 (82.5) 23/8 (60.3) 3/4”-10
HHSCS-1430-R I * 1430 (6.36) 41/4 (107.9) 23/4 (69.8) 113/8 (289.9) 61/2 (165.1) 6 (152.4) 3 (76.2) 7/8”-9
HHSCS-2120-R I * 2120 (9.43) 41/4 (107.9) 23/4 (69.8) 113/8 (289.9) 61/2 (165.1) 6 (152.4) 3 (76.2) 7/8”-9
HHSCS-2860-R I * 2860 (12.72) 41/4 (107.9) 23/4 (69.8) 113/8 (289.9) 61/2 (165.1) 6 (152.4) 3 (76.2) 7/8”-9
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 274 Eaton
Vibration Isolation
HHSCS Type - Combination Hanger Spring & Neoprene with Seismic Cushion Stop -
21/2” (63.5mm) Deflection
Use: Used to dampen noise and minor vibration from suspended high speed equipment. To be used with all thread
rod for single and trapeze type support systems.Used where uncertain alignment is anticipated during installation.
At rated load the hanger rod will operate to a full 15° tilt in any direction from vertical centerline.
• All housing sizes have been tested to carry five times the
maximum load without failure *Extra Strength Hanger
HHSCS-F1159 thru HHSCS-F3420
• Spring rated deflection is 2” (50.8mm) + neoprene rated
deflection is 1/2” (12.7mm) = 21/2” (63.5mm)
Seismic Cushion Stop
• SFH = Free Height NFH = Neoprene Free Height (SCS) Upper Long Life
Rubber Cushion
• Threaded rod, nuts, and washers supplied separately
• * Housings are specially reinforced for extra strength
• Minimum additional travel is 50% of rated deflection
at rated load
Basic Hanger
HHSCS-F59 thru HHSCS-F918
Seismic Cushion
L S Stop (SCS)
Seismic Cushion W
Lower Long Life
Stop (SCS)
Rubber Cushion
Upper Long Life
Bonded To Steel Plate
Rubber Cushion
S
D L
W
HHSCS-F83 83 (0.37) 41/4 (107.9) 11/2 (38.1) 9 (228.6) 3 (76.2) 21/2 (63.5) 23/8 (60.3) 1/2”-13
HHSCS-F120 120 (0.53) 41/4 (107.9) 11/2 (38.1) 9 (228.6) 3 (76.2) 21/2 (63.5) 23/8 (60.3) 1/2”-13
HHSCS-F155 155 (0.69) 41/4 (107.9) 13/4 (44.4) 9 (228.6) 3 (76.2) 21/2 (63.5) 23/8 (60.3) 1/2”-13
HHSCS-F195 195 (0.87) 41/2 (114.3) 13/4 (44.4) 9 (228.6) 3 (76.2) 21/2 (63.5) 23/8 (60.3) 1/2”-13
HHSCS-F241 241 (1.07) 41/2 (114.3) 13/4 (44.4) 10 (254.0) 51/2 (139.7) 41/2 (114.3) 23/8 (60.3) 1/2”-13
HHSCS-F348 348 (1.55) 5 (127.0) 13/4 (44.4) 10 (254.0) 51/2 (139.7) 41/2 (114.3) 23/8 (60.3) 5/8”-11
HHSCS-F453 453 (2.01) 5 (127.0) 13/4 (44.4) 10 (254.0) 51/2 (139.7) 41/2 (114.3) 23/8 (60.3) 5/8”-11
HHSCS-F590 590 (2.62) 5 (127.0) 21/2 (63.5) 11 (279.4) 51/4 (133.3) 41/2 (114.3) 3 (76.2) 3/4”-10
Vibration Isolation
HHSCS-F676 676 (3.00) 5 (127.0) 21/2 (63.5) 11 (279.4) 51/4 (133.3) 41/2 (114.3) 3 (76.2) 3/4”-10
HHSCS-F787 787 (3.50) 5 (127.0) 21/2 (63.5) 11 (279.4) 51/4 (133.3) 41/2 (114.3) 3 (76.2) 3/4”-10
HHSCS-F918 918 (4.08) 5 (127.0) 21/2 (63.5) 11 (279.4) 51/4 (133.3) 41/2 (114.3) 3 (76.2) 3/4”-10
HHSCS-F1159 * 1159 (5.15) 63/8 (161.9) 23/4 (69.8) 11 (279.4) 6 (152.9) 5 (127.0) 3 (76.2) 3/4”-10
HHSCS-F1408 * 1408 (6.26) 63/8 (161.9) 23/4 (69.8) 11 (279.4) 6 (152.9) 5 (127.0) 3 (76.2) 7/8”-9
HHSCS-F1710 * 1710 (7.60) 63/8 (161.9) 23/4 (69.8) 11 (279.4) 6 (152.9) 5 (127.0) 3 (76.2) 7/8”-9
HHSCS-F2318 * 2318 (10.31) 63/8 (161.9) 23/4 (69.8) 111/4 (285.7) 11 (279.4) 5 (127.0) 3 (76.2) 7/8”-9
HHSCS-F2816 * 2816 (12.52) 63/8 (161.9) 23/4 (69.8) 111/4 (285.7) 11 (279.4) 5 (127.0) 3 (76.2) 7/8”-9
HHSCS-F3420 * 3420 (15.21) 63/8 (161.9) 23/4 (69.8) 111/4 (285.7) 11 (279.4) 5 (127.0) 3 (76.2) 7/8”-9
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 275 B-Line series Pipe Hangers & Supports
Vibration Isolation
HH30SCS Type - 15° Tilt, 11/2” (38.1mm) Deflection Combination Hanger - Spring & Neoprene
with Seismic Cushion Stop
Use: Used to dampen noise and minor vibration from suspended high speed equipment. To be used with all thread
rod for single and trapeze type support systems.Used where uncertain alignment is anticipated during installation.
At rated load the hanger rod will operate to a full 15° tilt in any direction from vertical centerline.
• All housing sizes have been tested to carry five times the
maximum load without failure * Extra Strength Hanger
HH30SCS-E1612 thru HH30SCS-E4920
• Spring rated deflection is 1” (25.4mm) + neoprene rated SCS (T)
deflection is 1/2” (12.7mm) = 11/2” (38.1mm)
• SFH = Free Height NFH = Neoprene Free Height
• Threaded rod, nuts, and washers supplied separately
• * Housings are specially reinforced for extra strength
• Minimum additional travel is 50% of rated deflection at rated load
S
Basic Hanger
HH30SCS-ET20 thru HH30SCS-ET1326
SCS (T)
Neoprene
Neoprene S
See
Neoprene W
See Sleeve
Neoprene Detail
Sleeve SCS
Detail Spring Channel L (B)
L D D
SCS (B) W
Typical Part Numbering
Spring
Hanger Rod Neoprene
Steel Vertical Centerline Sleeve HH30SCS - ET129
Washer
Hanger Rod Type
Vertical Centerline Load
Neoprene Sleeve Neoprene Sleeve Detail
Neoprene Sleeve Detail
Dimensions
Rubber Cushion HH30SCS-ET80 80 (0.35) 21/8 (54.0) 11/2 (38.1) 61/2 (165.1) 35/8 (92.1) 21/2 (63.5) 23/8 (60.3) 3/8”-16
HH30SCS-ET129 129 (0.57) 23/8 (60.3) 11/2 (38.1) 61/2 (165.1) 35/8 (92.1) 21/2 (63.5) 23/8 (60.3) 3/8”-16
SCS (B) = Seismic HH30SCS-ET194 194 (0.86) 23/8 (60.3) 13/4 (44.4) 71/2 (190.5) 4 (101.6) 3 (76.2) 23/8 (60.3) 1/2”-13
Cushion Stop (SCS)
Lower Long Life
HH30SCS-ET255 255 (1.13) 21/2 (63.5) 13/4 (44.4) 71/2 (190.5) 4 (101.6) 3 (76.2) 23/8 (60.3) 1/2”-13
Rubber Cushion HH30SCS-ET347 347 (1.54) 23/4 (69.8) 13/4 (44.4) 81/2 (215.9) 55/16 (134.9) 41/4 (107.9) 23/8 (60.3) 5/8”-11
Bonded To HH30SCS-ET473 473 (2.10) 27/8 (73.0) 21/2 (63.5) 81/2 (215.9) 55/16 (134.9) 41/4 (107.9) 23/8 (60.3) 5/8”-11
Vibration Isolation
Steel Plate HH30SCS-ET667 667 (2.96) 31/8 (79.4) 21/2 (63.5) 10 (254.0) 57/8 (149.2) 43/4 (120.6) 3 (76.2) 3/4”-10
HH30SCS-ET940 940 (4.18) 33/8 (85.7) 21/2 (63.5) 10 (254.0) 57/8 (149.2) 43/4 (120.6) 3 (76.2) 3/4”-10
HH30SCS-ET1326 1326 (5.90) 35/8 (92.1) 23/4 (69.8) 10 (254.0) 57/8 (149.2) 43/4 (120.6) 3 (76.2) 7/8”-9
HH30SCS-E1612 * 1612 (7.17) 35/8 (92.1) 23/4 (69.8) 111/4 (285.7) 10 (254.0) 4 (101.6) 3 (76.2) 7/8”-9
HH30SCS-E2060 * 2060 (9.16) 37/8 (98.4) 23/4 (69.8) 111/4 (285.7) 10 (254.0) 4 (101.6) 3 (76.2) 1”-8
HH30SCS-E2460 * 2460 (10.94) 41/8 (104.8) 23/4 (69.8) 111/4 (285.7) 10 (254.0) 4 (101.6) 3 (76.2) 1”-8
HH30SCS-E2980 * 2980 (13.25) 41/8 (104.8) 23/4 (69.8) 111/4 (285.7) 10 (254.0) 4 (101.6) 3 (76.2) 1”-8
HH30SCS-E4120 * 4120 (18.32) 37/8 (98.4) 23/4 (69.8) 12 (304.8) 91/2 (241.3) 7 (177.8) 4 (101.6) 1”-8
HH30SCS-E4920 * 4920 (21.88) 41/8 (104.8) 23/4 (69.8) 12 (304.8) 91/2 (241.3) 7 (177.8) 4 (101.6) 1”-8
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 276 Eaton
Vibration Isolation
HH30SCS Type - 15° Tilt, 21/2” (63.5mm) Deflection Combination Hanger - Spring & Neoprene
with Seismic Cushion Stop
Use: Used to dampen noise and minor vibration from suspended high speed equipment. To be used with all thread
rod for single and trapeze type support systems.Used where uncertain alignment is anticipated during installation.
At rated load the hanger rod will operate to a full 15° tilt in any direction from vertical centerline.
• All housing sizes have been tested to carry five times the * Extra Strength Hanger
HH30SCS-F696 thru HH30SCS-F3420
maximum load without failure
SCS (T)
• Spring rated deflection is 2” (50.8mm) + neoprene rated
deflection is 1/2” (12.7mm) = 21/2” (63.5mm)
• SFH = Free Height NFH = Neoprene Free Height
• Threaded rod, nuts, and washers supplied separately
• * Housings are specially reinforced for extra strength
• Minimum additional travel is 50% of rated deflection at rated load
Basic Hanger S
HH30SCS-FT30 thru HH30SCS-F590
SCS (T)
Neoprene
Neoprene S
See
Neoprene W
See Sleeve
Neoprene Detail
Sleeve SCS
Detail Spring L (B)
L Channel
D D
SCS (B) W
Typical Part Numbering
Spring
Hanger Rod Neoprene
Steel Vertical Centerline Sleeve Hanger Rod HH30SCS - FT121
Washer Vertical Centerline
Type
Neoprene Sleeve Detail Load
Neoprene Sleeve
Neoprene Sleeve Detail
Dimensions
Rubber Cushion HH30SCS-FT60 60 (0.26) 33/4 (95.2) 11/2 (38.1) 8 (203.2) 5 (127.0) 4 (101.6) 23/8 (63.5) 1/2”-13
HH30SCS-FT85 85 (0.38) 33/4 (95.2) 11/2 (38.1) 8 (203.2) 5 (127.0) 4 (101.6) 23/8 (63.5) 1/2”-13
SCS (B) = Seismic HH30SCS-FT121 121 (0.54) 4 (101.6) 11/2 (38.1) 8 (203.2) 5 (127.0) 4 (101.6) 23/8 (63.5) 1/2”-13
Cushion Stop (SCS)
Lower Long Life
HH30SCS-FT171 171 (0.76) 41/4 (107.9) 13/4 (44.4) 10 (254.0) 51/4 (133.3) 41/2 (114.3) 3 (76.2) 1/2”-13
Rubber Cushion HH30SCS-FT241 241 (1.07) 41/2 (114.3) 13/4 (44.4) 10 (254.0) 51/4 (133.3) 41/2 (114.3) 3 (76.2) 1/2”-13
Bonded To HH30SCS-F348 348 (1.55) 5 (127.0) 13/4 (44.4) 10 (254.0) 51/4 (133.3) 41/2 (114.3) 3 (76.2) 5/8”-11
Steel Plate HH30SCS-F453 453 (2.01) 5 (127.0) 13/4 (44.4) 11 (279.4) 51/4 (133.3) 41/2 (114.3) 3 (76.2) 5/8”-11
HH30SCS-F590 590 (2.62) 5 (127.0) 21/2 (63.5) 11 (279.4) 51/4 (133.3) 41/2 (114.3) 3 (76.2) 3/4”-10
Vibration Isolation
HH30SCS-F696 * 696 (3.09) 5 (127.0) 21/2 (63.5) 11 (279.4) 103/8 (263.5) 4 (101.6) 3 (76.2) 3/4”-10
HH30SCS-F906 * 906 (4.03) 5 (127.0) 21/2 (63.5) 12 (304.8) 103/8 (263.5) 4 (101.6) 3 (76.2) 3/4”-10
HH30SCS-F1180 * 1180 (5.25) 5 (127.0) 21/2 (63.5) 12 (304.8) 103/8 (263.5) 4 (101.6) 3 (76.2) 3/4”-10
HH30SCS-F1352 * 1352 (6.01) 5 (127.0) 23/4 (69.8) 12 (304.8) 103/8 (263.5) 4 (101.6) 3 (76.2) 7/8”-9
HH30SCS-F1574 * 1574 (7.00) 5 (127.0) 23/4 (69.8) 12 (304.8) 103/8 (263.5) 4 (101.6) 3 (76.2) 7/8”-9
HH30SCS-F1836 * 1836 (8.16) 5 (127.0) 23/4 (69.8) 12 (304.8) 103/8 (263.5) 4 (101.6) 3 (76.2) 7/8”-9
HH30SCS-F2318 * 2318 (10.31) 61/2 (165.1) 23/4 (69.8) 141/4 (361.9) 123/8 (314.3) 5 (127.0) 4 (101.6) 7/8”-9
HH30SCS-F2816 * 2816 (12.52) 61/2 (165.1) 23/4 (69.8) 141/4 (361.9) 123/8 (314.3) 5 (127.0) 4 (101.6) 7/8”-9
HH30SCS-F3420 * 3420 (15.21) 61/2 (165.1) 23/4 (69.8) 141/4 (361.9) 123/8 (314.3) 5 (127.0) 4 (101.6) 7/8”-9
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 277 B-Line series Pipe Hangers & Supports
Vibration Isolation
Vibration Isolation
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 278 Eaton
DURA-BLOK™ Rooftop Supports
Rooftop Supports
DURA-BLOK
DURA-BLOK is made from 100% recycled rubber and qualifies for LEED credits. Reflective strips on both sides allow for
easy product visibility.
Channels are through bolted on all sizes for added strength and a 1” (25.4mm) gap between blocks allows water to flow
freely around longer assemblies.
Product composition is not sharp or abrasive, helping to extend the roof life and no penetration through the roof is required.
The DURA-BLOK dampens vibration, needs no supplemental rubber pad, and will not float or blow away.
The DURA-BLOK is UV resistant and is suitable or any type roofing material or other flat surface. For sloped surfaces see
page 289 for adjustable hinge fitting (B634).
The open ends allow for easier adjustments to DBE, DBR, and DBM series supports. A drainage channel through the center
of the block keeps water from pooling under the support.
DURA-BLOK can be used to support piping, HVAC/Ducts, roof walkways, conduit and cable tray.
Rooftop Supports
DURA-BLOK
Dimensions - 4” (101mm) High x 6” (152mm) Wide x Base Length
Material - 100% recycled rubber, UV resistant
Ultimate Load Capacity - (uniform load) *
DBP = 500 lbs. (2.22kN)
DBM = 200 lbs. (0.89kN)
DURA-BLOK channel support is designed as an economical support for piping systems, cable tray, HVAC
equipment and many other applications. The DURA-BLOK is UV resistant and is suitable for any type of
roofing material or other flat surfaces. Material effectively accepts screw fasteners for securing accessories.
DBP DBM
* For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs,
the weakest point may be the insulation board beneath the rubber membrane.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 280 Eaton
DURA-BLOK™ Rooftop Supports
DB - Series
Rooftop Supports
DURA-BLOK
DURA-BLOK DB-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment,
walkway systems and many other applications. The DURA-BLOK is UV resistant and suitable for installation on any type of
roofing material or other flat surfaces. For sloped roofs see adjustable hinge fitting (B634).
DB5 DB10
DB40
DB20
DB30 DB48
For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 289.
* For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs,
the weakest point may be the insulation board beneath the rubber membrane.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 281 B-Line series Pipe Hangers & Supports
DURA-BLOK™ Rooftop Supports
DB6 - Series
Rooftop Supports
DURA-BLOK
Base with Galv. Channel - 27/16” (62mm) high
Dimensions - 67/16” (163mm) High x 6” (152mm) Wide x Length (overall length)
Material - 100% recycled rubber, UV resistant
Ultimate Load Capacity - (uniform load) *
DB610 = 500 lbs. (2.22kN)
DB620 = 1,000 lbs. (4.45kN)
DB630 = 1,500 lbs. (6.67kN)
DB640 = 2,000 lbs. (8.89kN)
DB648 = 2,500 lbs. (22.12kN)
DURA-BLOK DB6-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment,
walkway systems and many other applications. The DURA-BLOK is UV resistant and suitable for installation on any type of
roofing material or other flat surfaces. For sloped roofs see adjustable hinge fitting (B634).
DB610
DB620
DB640
DB630
DB648
For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 289.
* For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs,
the weakest point may be the insulation board beneath the rubber membrane.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 282 Eaton
DURA-BLOK™ Rooftop Supports
DB10 - Series
Rooftop Supports
DURA-BLOK
DURA-BLOK DB10-Series channel support is designed for superior support of piping systems, cable tray, HVAC
equipment, walkway systems and many other applications. The DURA-BLOK is UV resistant and suitable for installation
on any type of roofing material or other flat surfaces.
DB10-28
DB10-50
DB10-36
DB10-42
DB10-60
Part No. Height Width Individual Base Length Bridge Length Weight Each
in. (mm) in. (mm) in. (mm) in. (mm) lbs. (kg)
DB10-28 53/8” (143) 6” (152) 9.6” (244) 28” (711) 13.16 (5.97)
DB10-36 53/8” (143) 6” (152) 9.6” (244) 36” (914) 14.36 (6.51)
DB10-42 53/8” (143) 6” (152) 9.6” (244) 42” (1067) 15.52 (7.04)
DB10-50 53/8” (143) 6” (152) 9.6” (244) 50” (1270) 16.45 (7.46)
DB10-60 53/8” (143) 6” (152) 9.6” (244) 60” (1524) 17.94 (8.14)
For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 289.
* For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs,
the weakest point may be the insulation board beneath the rubber membrane.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 283 B-Line series Pipe Hangers & Supports
DURA-BLOK™ Rooftop Supports
DBM - Series
Rooftop Supports
DURA-BLOK
Base with one (1) 3/8”-16 Electro Zinc All Threaded Rod and Hinged Pipe Clamp
Dimensions - Height to Pipe Center x 6” (152mm) Wide x 4.8” (122mm) Long (overall length)
Material - 100% recycled rubber, UV resistant
Pipe Clamp Material - Malleable Iron -
Pipe Sizes - Electro Plated
Copper Tubing Sizes - Dura Copper™
Threaded Rod/Hardware - Electro Plated Steel
Ultimate Load Capacity - 50 lbs. (0.22kN) (uniform load) *
DBM-2CT
† See Pipe Hanger Catalog for dimensions and specifications. ** From bottom of rubber block to center of pipe/tubing.
* For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs,
the weakest point may be the insulation board beneath the rubber membrane.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 284 Eaton
DURA-BLOK™ Rooftop Supports
DB_DS - Series
Rooftop Supports
DURA-BLOK
Two (2) Base Supports with Galv. Channel - 15/8” (41mm) high
Riser Channels (SH Style) - 15/8” (41mm) x 15/8” (41mm)
Fittings & Hardware - Electro-Plated Steel
Dimensions - Height (overall) x Width (overall) x Length (overall)
Material - 100% recycled rubber, UV resistant
Ultimate Load Capacity - 1,000 lbs. (4.45kN) (uniform load) *
DURA-BLOK DB__DS-Series channel support with risers is designed for superior support of piping systems, cable tray, HVAC
equipment, walkway systems and many other applications. The DURA-BLOK is UV resistant and suitable for installation on any
type of roofing material or other flat surfaces.
B + 4.5” (114mm)
DB2318DS
Height
(overall)
Length
Width (overall)
(overall)
DB2924DS DB5336DS
For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 289.
* For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs,
the weakest point may be the insulation board beneath the rubber membrane.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 285 B-Line series Pipe Hangers & Supports
DURA-BLOK™ Rooftop Supports
DB__DS - Series cont.
Rooftop Supports
DURA-BLOK
Part No. A (Minimum) A (Maximum) B
in. (mm) in. (mm) in. (mm)
Part No. Height (overall) Width (overall) Length (overall) Weight Each
in. (mm) in. (mm) in. (mm) lbs. (kg)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 286 Eaton
DURA-BLOK™ Rooftop Supports
DBR - Series (Fixed Height)
Rooftop Supports
DURA-BLOK
Base with Galv. Channel - 1” (25.4mm) high and Pipe Roller Assembly
Dimensions - Height to Bottom of Pipe x 6” (152mm) Wide x Long (overall length)
Material - 100% recycled rubber, UV resistant
Pipe Roller Material - Cast Iron - Electro Plated
Brackets, Axle, & Hardware - Electro Plated Steel
Ultimate Load Capacity - (uniform load) *
DBR2-31/2 = 500 lbs. (2.22kN)
DBR4-6 = 500 lbs. (2.22kN)
DBR8-10 = 1000 lbs. (4.44kN)
DBR12-14 = 1000 lbs. (4.44kN) DBR4-6
DBR16-20 = 1000 lbs. (4.44kN)
DBR16-20
† See Pipe Hanger Catalog for dimensions and specifications. ** From bottom of rubber block to bottom of pipe/tubing.
* For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs,
the weakest point may be the insulation board beneath the rubber membrane.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 287 B-Line series Pipe Hangers & Supports
DURA-BLOK™ Rooftop Supports
DBR - Series (Adjustable Height)
Rooftop Supports
DURA-BLOK
Base with two (2) 1/2”-13 Electro Zinc All
Threaded Rod Risers and a B3114-31/2 Pipe Roll with Sockets
Dimensions - Overall Height 12” (305mm) from bottom of base to pipe
contact point on roller.
Base - 4” High (101mm) x 6” (152mm) Wide x 9.6” (244mm) Length (base length)
Material - 100% recycled rubber, UV resistant
Pipe Roll & Sockets - For up to 31/2” (90mm) pipe sizes.
Ultimate Load Capacity - 200 lbs. (0.89kN) *
(To increase load capacity use CLDP10 load distribution plate.)
DBE - Series
Base with two (2) 1/2”-13 Electro Zinc All Threaded Rod Risers and
Galv. Channel - 1” (25mm) high
Dimensions - Overall Height as Specified
Base - 4” High (101mm) x 6” (152mm) Wide x 9.6” (244mm) Length (base length)
Material - 100% recycled rubber, UV resistant
Ultimate Load Capacity - 200 lbs. (0.89kN) * (To increase load capacity use
CLDP10 load distribution plate.)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 288 Eaton
DURA-BLOK™ Rooftop Supports
CLDP10 - Load Distribution Plate
Rooftop Supports
DURA-BLOK
BTS
TN Nuts B22TH B22SH
HHCS
B634
NE
B-LI50
B3124
P
BVP12”.I.
1 1/
Series
B2000 Series B2400
B101 B104 BVT Series
Series
Above rollers can be mounted on DB Series, DB6 Series, and DB10 Series units.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 289 B-Line series Pipe Hangers & Supports
DURA-BLOK™ Rooftop Supports
Rooftop Support Specification
Rooftop Supports
DURA-BLOK
SECTION 07720
ROOFTOP SUPPORT SYSTEMS
(Applicable to Section 15060 (Mechanical) and Section 16070 (Electrical)
PART 1 GENERAL
1.01 SECTION INCLUDES
A. The work covered by this specification consists of furnishing all labor, equipment, materials and accessories,
and performing all operations required for the correct installation of recycled rubber pipe [conduit] supports
for mechanical piping [electrical conduit] systems.
1.02 REFERENCES
A. ASTM A653 G90 SS Gr. 33 - Specification for Steel Sheet, Zinc Coated (Galvanized) by the Hot Dipped Process
B. ASTM B633 - Specification for Electrodeposited Coatings of Zinc on Iron and Steel
C. ASTM C531 – Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical Resistant
Mortars, Grouts, Monolithic Surfaces, and Polymer Concretes
D. ASTM C642 – Test Method for Specific Gravity, Absorption, and Voids in Hardened Concrete
E. ASTM C672 – Test Methods for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
F. ASTM D412 – Test Methods for Vulcanized Rubber and Thermoplastic Elastomers – Tension
G. ASTM D395 – Standard Test Methods for Rubber Property – Compression Set
H. ASTM D573 – Test Method for Rubber – Deterioration in an Air Oven
I. ASTM D746 – Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
J. ASTM D2240 – Test Method for Rubber Property – Durometer Hardness
K. NFPA 70 – National Electrical Code
PART 2 PRODUCTS
2.01 ACCEPTABLE MANUFACTURERS
A. Manufacturer: Subject to compliance with these specifications, pipe support systems shall be DURA-BLOK™ design
as supplied by Eaton B-Line Business [or engineer approved equal].
2.02 MATERIALS
A. Curb base must be made of 100% recycled rubber and polyurethane prepolymer with a uniform load capacity of 500 pounds per
linear foot of support*. In addition, each base to have a reflective red stripe.
(*See 3.01(C))
B. Dimensions: 6-inches wide by [4] [5.0] [6.75] inches tall by [9.6] [20.2] [30.8] [41.4] [52.0] inches long.
C. Steel frame: Steel, 14ga strut galvanized per ASTM A653 or 12ga strut galvanized per ASTM A653 for bridge series.
D. Attaching hardware: Zinc-plated threaded rod, nuts and attaching hardware per ASTM B633.
B-Line series GRATEWALK™ Rooftop Walkways with DURA-BLOK™ provides the optimal solution to extend the
life of your roof, while providing a safe pathway to roof mounted support equipment.
• Easy to install, elevated design, creates an identifiable path for foot traffic helping prevent wear and tear to
the roof surface.
• The cross-over design offers safe passage over existing cabling, piping, cable tray or any other
interference on the rooftop.
• The self cleaning pattern allows water and dirt to easily flow through, helping make the grating
an ideal walkway in all weather conditions.
• Integrated with 100% post-consumer recycled rubber supporting LEED credit qualification.
• Provide solid support for the walkway that stays in place and replaces the need for separate rubber
roof mounting pads which tend to float away.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 291 B-Line series Pipe Hangers & Supports
DURA-BLOK™ Rooftop Supports
GRATEWALK™
Rooftop Supports
Rooftop Walkway with Integrated DURA-BLOK™ Supports
DURA-BLOK
The GRATEWALK™ Rooftop Walkway with Integrated
DURA-BLOK™ Supports* is available in a variety of configurations.
Figure A
The new KwikWire Hanging System is a flexible replacement for jack chain and all thread rod. The KwikWire System will
slash your hanging time and the clamp can be easily adjusted by hand.
Some of the key benefits of using the new KwikWire System include:
• Installs up to 50% faster - can quickly wrap around beam with no drilling required
• Simple height adjustments are made by releasing the clamp’s adjustment pin – no tools required
• Aesthetic appeal - blends in with upper structural supports
• Compatibility with many B-Line series fastener, anchor and hanger products
• Ideal for sloped ceiling applications - will support loads at up to a 60° angle from vertical
Applications for the KwikWire Hanging System include light fixture supports, HVAC duct supports, sway bracing,
sign/banner supports, wire basket cable tray supports, bus duct supports and air handling equipment supports.
KwikWire
Clamp Working Loads
KwikWire Clamp
Working Loads* * Working loads shown
Wire Lbs. are for hanging
Clamp vertically.
Rope Safety
Part No.
Dia. Factor 5 For suspending at 15° = 96%
15°, 30°, 45° or 60° 30° = 86%
BKC100 1/16” 0-75 45° = 70%
angles from vertical, use
BKC100 3/32” 25-150 the following percentage 60° = 50%
BKC200 1/8” 25-250 of the working loads from
3/16” the chart:
BKC200 50-640
Instructions for installing the wire rope in the clamp - No tools are required.
1 2 3 4 5
Pass the wire rope Loop wire rope Pass wire rope back Push wire rope through To adjust, remove tension
through the KwikWire through/around through KwikWire clamp leaving 2” to 3” and pull wire rope slightly
Clamp support Clamp tail, then apply tension on to disengage teeth, slide
wire rope adjustment pin in direction
shown by arrow to release
wire rope.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 294 Eaton
KwikWire™ Accessories
Box
Part No. Qty.
BKCC 1
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 295 B-Line series Pipe Hangers & Supports
KwikWire™ Accessories
• KwikWire hanger combines the
versatility of a bolt with an
KwikWire Hanger
adjustable wire rope solution.
• Can be quickly installed in
existing anchors or metal Part No. Thread Wire Rope Dia. Loading* SF5
brackets with a nut. Size in. mm Lbs. kg
1/16” (1.6) 45 (20.4)
• ARS, ARC, and ARW anchors BKF100-4 1/4”-20
are ideal for use with KwikWire 3/32” (2.3) 90 (40.8)
Hangers. 1/16” (1.6) 45 (20.4)
KwikWire
BKF100-6 3/8”-16
• Ideal for supporting light 3/32” (2.3) 90 (40.8)
fixtures, wire basket cable
tray, HVAC ducts, and
sign/banner supports.
• Allows for tool-less adjustment
of wire rope.
KwikWire Hanger shown
with KwikWire
1 2 3
4 5 6
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 296 Eaton
KwikWire™ Accessories
KwikWire Accessory Features
• Reduces on the job installation time
• Can be installed quickly without drilling into existing structure
• Increases versatility in the field
• KwikWire accessory system reduces inventory and shipping costs
• No more sawing, filing, or fixing nuts
• Designed for use with cable tray, lighting, and HVAC
KwikWire
Examples
BKYT18-094-120K
BK Y T 18 - 063 - 120 K
KwikWire Accessory
2 legs - toggle leg termination - 18” legs - 1/16” diameter wire - 120” straight length - kit with clamp
BKL-063-120K
BK L - 063 - 120 K
KwikWire Accessory
single leg - looped leg termination - 1/16” diameter wire - 120” straight length - kit with clamp
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 297 B-Line series Pipe Hangers & Supports
KwikWire™ Accessories
KwikWire
BKL-063-180 1/16” (1.6) 180” (4572)
BKL-063-240 1/16” (1.6) 240” (6096)
BKL-063-360 1/16” (1.6) 360” (9144)
BKL-094-40 3/32” (2.3) 40” (1016)
BKL-094-80 3/32” (2.3) 80” (2032)
BKL-094-120 3/32” (2.3) 120” (3048)
BKL-094-180 3/32” (2.3) 180” (4572) Box Quantity - 20
BKL-094-240 3/32” (2.3) 240” (6096) 5 bags containing 4 pieces per bag
BKL-094-360 3/32” (2.3) 360” (9144)
• Available as a wire rope with loop termination only or as a ready-to-use kit with a BKC100 clamp.
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 298 Eaton
KwikWire™ Accessories
(2.3) (2032)
BKH-094-120 3/32” (2.3) 120” (3048)
BKH-094-180 3/32” (2.3) 180” (4572)
Box Quantity - 20 3/32”
BKH-094-240 (2.3) 240” (6096)
5 bags containing 4 pieces per bag 3/32”
BKH-094-360 (2.3) 360” (9144)
Box Quantity - 10
5 bags containing 2 pieces per bag
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 299 B-Line series Pipe Hangers & Supports
KwikWire™ Accessories
KwikWire
BKYH18-094-240 18” (457) 3/32” (2.3) 240” (6096)
BKYH18-094-360 18” (457) 3/32” (2.3) 360” (9144)
BKYH30-094-40 30” (762) 3/32” (2.3) 40” (1016)
BKYH30-094-80 30” (762) 3/32” (2.3) 80” (2032)
BKYH30-094-120 30” (762) 3/32” (2.3) 120” (3048)
BKYH30-094-180 30” (762) 3/32” (2.3) 180” (4572)
BKYH30-094-240 30” (762) 3/32” (2.3) 240” (6096)
BKYH30-094-360 30” (762) 3/32” (2.3) 360” (9144)
Box Quantity - 10
5 bags containing 2 pieces per bag
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 300 Eaton
KwikWire™ Accessories
• Ideal for use with ARS, ARC, ADI, ACPW, or ACPD anchors.
• Available as a wire rope with bolt termination only or as a ready-to-use kit with a BKC100 clamp.
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
• Available in single, double (Y), and triple leg (3) styles
• All (Y) and triple (3) styles are non-stock, contact us for lead times
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton 301 B-Line series Pipe Hangers & Supports
KwikWire™ Accessories
KwikWire
BKA-063-80 1/16” (1.6) 80” (2032)
BKA-063-120 1/16” (1.6) 120” (3048)
BKA-063-180 1/16” (1.6) 180” (4572)
BKA-063-240 1/16” (1.6) 240” (6096)
BKA-063-360 1/16” (1.6) 360” (9144) Box Quantity - 20
5 bags containing 4 pieces per bag
• Available as a wire rope with angle bracket termination only or as a ready-to-use kit with a BKC100 clamp.
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports 302 Eaton
Anchor Load Charts
NFPA 13-16
AWSD / Powers Power-Stud+® SD2 Seismic Wedge Anchors
In 3000 psi Sand Lightweight Concrete
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 3000 psi Sand Lightweight Concrete (lbs.) 1,2
Tolco Figure 980
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.469 2.008
3
/8 2.375 101 222 270 156 222 175 84 118 145
1
/2 3.750 216 491 605 349 491 374 182 257 315
5
Anchor Load Charts
/8 3.875 252 594 741 428 594 437 216 306 375
3
/4 4.500 311 728 907 523 728 539 266 376 461
1
Values calculated in accordance with NFPA 13-16 Annex E.7 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 3000 psi Sand Lightweight Concrete (lbs.) 1,2
Tolco Figure 909
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 2.626 1.002 0.873 1.513 1.002 1.516 2.460 1.740 1.420
3
/8 2.375 121 243 265 153 243 210 107 151 185
1
/2 3.750 161 541 592 342 541 452 235 333 407
5
/8 3.875 306 658 724 418 658 530 283 401 491
3
/4 4.500 378 806 886 512 806 654 348 492 602
1
Values calculated in accordance with NFPA 13-16 Annex E.7 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 3000 psi Sand Lightweight Concrete (lbs.) 1,2
Tolco Figure 910
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.459 2.008
3
/8 2.375 101 222 270 156 222 175 84 118 145
1
/2 3.750 216 491 605 349 491 374 182 257 315
5
/8 3.875 252 594 741 428 594 437 216 306 375
3
/4 4.500 311 728 907 523 728 539 266 376 461
1
Values calculated in accordance with NFPA 13-16 Annex E.7 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton AL1 B-Line series Pipe Hangers & Supports
Anchor Load Charts
NFPA 13-16
AWSD / Powers Power-Stud+® SD2 Seismic Wedge Anchors
In 3000 psi Normal Weight Cracked Concrete
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 3000 psi Normal Weight Cracked Concrete (lbs.) 1,2
Tolco Figure 980
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.469 2.008
3
/8 2.375 145 310 373 215 310 251 118 167 205
1
/2 3.750 299 632 756 436 632 517 242 342 419
5
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 3000 psi Normal Weight Cracked Concrete (lbs.) 1,2
Tolco Figure 909
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 2.626 1.002 0.873 1.513 1.002 1.516 2.460 1.740 1.420
3
/8 2.375 173 338 366 211 338 300 149 211 259
1
/2 3.750 356 687 742 428 687 617 304 430 526
5
/8 3.875 423 852 926 534 852 733 373 527 646
3
/4 4.500 521 1039 1128 651 1039 902 456 645 790
1
Values calculated in accordance with NFPA 13-16 Annex E.7 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 3000 psi Normal Weight Cracked Concrete (lbs.) 1,2
Tolco Figure 910
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.459 2.008
3
/8 2.375 145 310 373 215 310 251 118 167 205
1
/2 3.750 299 632 756 436 632 517 242 342 419
5
/8 3.875 353 777 945 545 777 611 292 413 506
3
/4 4.500 434 950 1151 664 950 752 358 506 620
1
Values calculated in accordance with NFPA 13-16 Annex E.7 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports AL2 Eaton
Anchor Load Charts
NFPA 13-16
AWSD / Powers Power-Stud+® SD2 Seismic Wedge Anchors
In 4000 psi Normal Weight Cracked Concrete
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 4000 psi Normal Weight Cracked Concrete (lbs.) 1,2
Tolco Figure 980
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.469 2.008
3
/8 2.375 157 329 393 227 329 271 126 179 219
1
/2 3.750 335 688 813 470 688 581 267 377 462
5
Anchor Load Charts
/8 3.875 398 852 1025 592 852 689 324 458 561
3
/4 4.500 489 1040 1247 720 1040 847 397 561 688
1
Values calculated in accordance with NFPA 13-16 Annex E.7 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 4000 psi Normal Weight Cracked Concrete (lbs.) 1,2
Tolco Figure 909
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 2.626 1.002 0.873 1.513 1.002 1.516 2.460 1.740 1.420
3
/8 2.375 187 358 386 223 358 323 158 224 274
1
/2 3.750 398 744 800 462 744 689 332 469 574
5
/8 3.875 475 929 1005 580 929 823 410 579 709
3
/4 4.500 584 1132 1224 706 1132 1011 500 707 866
1
Values calculated in accordance with NFPA 13-16 Annex E.7 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 4000 psi Normal Weight Cracked Concrete (lbs.) 1,2
Tolco Figure 910
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.459 2.008
3
/8 2.375 157 329 393 227 329 271 126 179 219
1
/2 3.750 335 688 813 470 688 581 267 377 462
5
/8 3.875 398 852 1025 592 852 689 324 458 561
3
/4 4.500 489 1040 1247 720 1040 847 397 561 688
1
Values calculated in accordance with NFPA 13-16 Annex E.7 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton AL3 B-Line series Pipe Hangers & Supports
Anchor Load Charts
NFPA 13-16
AWSD / Powers Power-Stud+® SD2 Seismic Wedge Anchors
In 5000 psi Normal Weight Cracked Concrete
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 5000 psi Normal Weight Cracked Concrete (lbs.) 1,2
Tolco Figure 980
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.469 2.008
3
/8 2.375 166 344 408 235 344 288 133 188 230
1
/2 3.750 366 732 858 495 732 634 287 406 497
5
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 5000 psi Normal Weight Cracked Concrete (lbs.) 1,2
Tolco Figure 909
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 2.626 1.002 0.873 1.513 1.002 1.516 2.460 1.740 1.420
3
/8 2.375 197 373 401 231 373 342 166 234 287
1
/2 3.750 432 789 844 488 789 748 354 500 612
5
/8 3.875 518 991 1068 617 991 898 439 621 761
3
/4 4.500 637 1206 1298 750 1206 1103 536 758 928
1
Values calculated in accordance with NFPA 13-16 Annex E.7 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 5000 psi Normal Weight Cracked Concrete (lbs.) 1,2
Tolco Figure 910
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.459 2.008
3
/8 2.375 166 344 408 235 344 288 133 188 230
1
/2 3.750 366 732 858 495 732 634 287 406 497
5
/8 3.875 435 912 1087 628 912 754 350 496 607
3
/4 4.500 536 1112 1322 763 1112 928 429 607 743
1
Values calculated in accordance with NFPA 13-16 Annex E.7 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports AL4 Eaton
Anchor Load Charts
NFPA 13-16
AWSD / Powers Power-Stud+® SD2 Seismic Wedge Anchors
In 6000 psi Normal Weight Cracked Concrete
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 6000 psi Normal Weight Cracked Concrete (lbs.) 1,2
Tolco Figure 980
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.469 2.008
3
/8 2.375 174 356 420 243 356 302 138 196 240
1
/2 3.750 392 768 895 517 768 680 304 430 527
5
Anchor Load Charts
/8 3.875 468 962 1139 658 962 811 373 527 646
3
/4 4.500 576 1172 1383 798 1172 997 456 645 790
1
Values calculated in accordance with NFPA 13-16 Annex E.7 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 6000 psi Normal Weight Cracked Concrete (lbs.) 1,2
Tolco Figure 909
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 2.626 1.002 0.873 1.513 1.002 1.516 2.460 1.740 1.420
3
/8 2.375 207 385 413 238 385 358 172 243 297
1
/2 3.750 462 826 881 509 826 799 372 526 644
5
/8 3.875 556 1042 1119 646 1042 963 464 656 804
3
/4 4.500 682 1267 1360 785 1267 1181 566 800 979
1
Values calculated in accordance with NFPA 13-16 Annex E.7 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 6000 psi Normal Weight Cracked Concrete (lbs.) 1,2
Tolco Figure 910
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.459 2.008
3
/8 2.375 174 356 420 243 356 302 138 196 240
1
/2 3.750 392 768 895 517 768 680 304 430 527
5
/8 3.875 468 962 1139 658 962 811 373 527 646
3
/4 4.500 576 1172 1383 798 1172 997 456 645 790
1
Values calculated in accordance with NFPA 13-16 Annex E.7 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton AL5 B-Line series Pipe Hangers & Supports
Anchor Load Charts
NFPA 13-16
Wood-Knocker™
In 3000 psi Sand Lightweight Concrete
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports AL6 Eaton
Anchor Load Charts
NFPA 13-16
Wood-Knocker™
In 3000 psi Normal Weight Cracked Concrete
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton AL7 B-Line series Pipe Hangers & Supports
Anchor Load Charts
NFPA 13-16
Wood-Knocker™
In 4000 psi Normal Weight Cracked Concrete
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports AL8 Eaton
Anchor Load Charts
NFPA 13-16
Wood-Knocker™
In 5000 psi Normal Weight Cracked Concrete
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton AL9 B-Line series Pipe Hangers & Supports
Anchor Load Charts
NFPA 13-16
Wood-Knocker™
In 6000 psi Normal Weight Cracked Concrete
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports AL10 Eaton
Anchor Load Charts
ASCE 7-10
AWSD / Powers Power-Stud+® SD2 Seismic Wedge Anchors
In 3000 psi Sand Lightweight Concrete
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 3000 psi Sand Lightweight Concrete (lbs.) 1,2,3
Tolco Figure 980
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.469 2.008
3
/8 2.375 81 178 216 125 178 140 67 94 116
1
/2 3.750 173 393 484 279 393 299 145 206 252
5
Anchor Load Charts
/8 3.875 202 475 593 342 475 350 173 245 300
3
/4 4.500 249 582 725 419 582 431 213 301 369
1
Values calculated in accordance with ASCE 7-10 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
3
Anchor capacities increased by a factor or 1.2 per ASCE 7-10 Section 12.4.3.3
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 3000 psi Sand Lightweight Concrete (lbs.) 1,2,3
Tolco Figure 909
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 2.626 1.002 0.873 1.513 1.002 1.516 2.460 1.740 1.420
3
/8 2.375 97 195 212 122 195 168 85 121 148
1
/2 3.750 209 433 473 273 433 361 188 266 326
5
/8 3.875 245 526 579 334 526 424 227 321 393
3
/4 4.500 302 645 709 409 645 523 278 393 482
1
Values calculated in accordance with ASCE 7-10 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
3
Anchor capacities increased by a factor or 1.2 per ASCE 7-10 Section 12.4.3.3
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 3000 psi Sand Lightweight Concrete (lbs.) 1,2,3
Tolco Figure 910
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.459 2.008
3
/8 2.375 81 178 216 125 178 140 67 94 116
1
/2 3.750 173 393 484 279 393 299 145 206 252
5
/8 3.875 202 475 593 342 475 350 173 245 300
3
/4 4.500 249 582 725 419 582 431 213 301 369
1
Values calculated in accordance with ASCE 7-10 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
3
Anchor capacities increased by a factor or 1.2 per ASCE 7-10 Section 12.4.3.3
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton AL11 B-Line series Pipe Hangers & Supports
Anchor Load Charts
ASCE 7-10
AWSD / Powers Power-Stud+® SD2 Seismic Wedge Anchors
In 3000 psi Normal Weight Cracked Concrete
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 3000 psi Normal Weight Cracked Concrete (lbs.) 1,2,3
Tolco Figure 980
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.469 2.008
3
/8 2.375 116 248 299 172 248 201 95 134 164
1
/2 3.750 239 505 604 349 505 414 193 273 335
5
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 3000 psi Normal Weight Cracked Concrete (lbs.) 1,2,3
Tolco Figure 909
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 2.626 1.002 0.873 1.513 1.002 1.516 2.460 1.740 1.420
3
/8 2.375 139 271 293 169 271 240 119 169 207
1
/2 3.750 285 550 593 343 550 494 243 344 421
5
/8 3.875 339 681 741 428 681 587 298 422 517
3
/4 4.500 417 831 903 521 831 722 365 516 632
1
Values calculated in accordance with ASCE 7-10 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
3
Anchor capacities increased by a factor or 1.2 per ASCE 7-10 Section 12.4.3.3
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 3000 psi Normal Weight Cracked Concrete (lbs.) 1,2,3
Tolco Figure 910
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.459 2.008
3
/8 2.375 116 248 299 172 248 201 95 134 164
1
/2 3.750 239 505 604 349 505 414 193 273 335
5
/8 3.875 282 622 756 436 622 489 234 330 404
3
/4 4.500 347 760 921 532 760 602 286 405 496
1
Values calculated in accordance with ASCE 7-10 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
3
Anchor capacities increased by a factor or 1.2 per ASCE 7-10 Section 12.4.3.3
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports AL12 Eaton
Anchor Load Charts
ASCE 7-10
AWSD / Powers Power-Stud+® SD2 Seismic Wedge Anchors
In 4000 psi Normal Weight Cracked Concrete
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 4000 psi Normal Weight Cracked Concrete (lbs.) 1,2,3
Tolco Figure 980
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.469 2.008
3
/8 2.375 125 263 314 181 263 217 101 143 175
1
/2 3.750 268 550 651 376 550 465 213 302 370
5
Anchor Load Charts
/8 3.875 318 682 820 473 682 551 259 367 449
3
/4 4.500 391 832 997 576 832 678 318 449 550
1
Values calculated in accordance with ASCE 7-10 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
3
Anchor capacities increased by a factor or 1.2 per ASCE 7-10 Section 12.4.3.3
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 4000 psi Normal Weight Cracked Concrete (lbs.) 1,2,3
Tolco Figure 909
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 2.626 1.002 0.873 1.513 1.002 1.516 2.460 1.740 1.420
3
/8 2.375 149 286 308 178 286 259 127 179 220
1
/2 3.750 318 595 640 369 595 551 265 375 460
5
/8 3.875 380 743 804 464 743 658 328 463 568
3
/4 4.500 391 906 979 565 906 809 400 566 693
1
Values calculated in accordance with ASCE 7-10 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
3
Anchor capacities increased by a factor or 1.2 per ASCE 7-10 Section 12.4.3.3
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 4000 psi Normal Weight Cracked Concrete (lbs.) 1,2,3
Tolco Figure 910
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.459 2.008
3
/8 2.375 125 263 314 181 263 217 101 143 175
1
/2 3.750 268 550 651 376 550 465 213 302 370
5
/8 3.875 318 682 820 473 682 551 259 367 449
3
/4 4.500 391 832 997 576 832 678 318 449 550
1
Values calculated in accordance with ASCE 7-10 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
3
Anchor capacities increased by a factor or 1.2 per ASCE 7-10 Section 12.4.3.3
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton AL13 B-Line series Pipe Hangers & Supports
Anchor Load Charts
ASCE 7-10
AWSD / Powers Power-Stud+® SD2 Seismic Wedge Anchors
In 5000 psi Normal Weight Cracked Concrete
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 5000 psi Normal Weight Cracked Concrete (lbs.) 1,2,3
Tolco Figure 980
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.469 2.008
3
/8 2.375 133 275 326 188 275 230 106 150 184
1
/2 3.750 293 585 687 396 585 507 230 325 398
5
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 5000 psi Normal Weight Cracked Concrete (lbs.) 1,2,3
Tolco Figure 909
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 2.626 1.002 0.873 1.513 1.002 1.516 2.460 1.740 1.420
3
/8 2.375 158 298 321 185 298 274 133 187 230
1
/2 3.750 346 631 676 390 631 599 283 400 490
5
/8 3.875 415 793 854 493 793 718 351 497 609
3
/4 4.500 509 965 1039 600 965 882 429 606 742
1
Values calculated in accordance with ASCE 7-10 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
3
Anchor capacities increased by a factor or 1.2 per ASCE 7-10 Section 12.4.3.3
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 5000 psi Normal Weight Cracked Concrete (lbs.) 1,2,3
Tolco Figure 910
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.459 2.008
3
/8 2.375 133 275 326 188 275 230 106 150 184
1
/2 3.750 293 585 687 396 585 507 230 325 398
5
/8 3.875 348 730 870 502 730 603 280 396 486
3
/4 4.500 428 890 1057 610 890 742 343 485 594
1
Values calculated in accordance with ASCE 7-10 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
3
Anchor capacities increased by a factor or 1.2 per ASCE 7-10 Section 12.4.3.3
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports AL14 Eaton
Anchor Load Charts
ASCE 7-10
AWSD / Powers Power-Stud+® SD2 Seismic Wedge Anchors
In 6000 psi Normal Weight Cracked Concrete
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 6000 psi Normal Weight Cracked Concrete (lbs.) 1,2,3
Tolco Figure 980
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.469 2.008
3
/8 2.375 139 285 336 194 285 242 111 156 192
1
/2 3.750 314 615 716 413 615 544 243 344 421
5
Anchor Load Charts
/8 3.875 375 770 911 526 770 649 298 422 517
3
/4 4.500 461 938 1106 639 938 798 365 516 632
1
Values calculated in accordance with ASCE 7-10 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
3
Anchor capacities increased by a factor or 1.2 per ASCE 7-10 Section 12.4.3.3
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 6000 psi Normal Weight Cracked Concrete (lbs.) 1,2,3
Tolco Figure 909
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 2.626 1.002 0.873 1.513 1.002 1.516 2.460 1.740 1.420
3
/8 2.375 165 308 330 191 308 286 137 194 238
1
/2 3.750 369 661 705 407 661 640 297 421 515
5
/8 3.875 445 833 896 517 833 770 371 525 643
3
/4 4.500 546 1014 1088 628 1014 945 452 640 784
1
Values calculated in accordance with ASCE 7-10 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
3
Anchor capacities increased by a factor or 1.2 per ASCE 7-10 Section 12.4.3.3
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
AWSD (Powers Power -Stud+® SD2) Seismic Wedge Anchor in 6000 psi Normal Weight Cracked Concrete (lbs.) 1,2,3
Tolco Figure 910
A B C D E F G H I
Dia. Embedment Pr Pr Pr Pr Pr Pr Pr Pr Pr
(in.) (in.) 3.275 1.156 0.844 1.461 1.156 1.891 3.478 2.459 2.008
3
/8 2.375 139 285 336 194 285 242 111 156 192
1
/2 3.750 314 615 716 413 615 544 243 344 421
5
/8 3.875 375 770 911 526 770 649 298 422 517
3
/4 4.500 461 938 1106 639 938 798 365 516 632
1
Values calculated in accordance with ASCE 7-10 See ICC-ESR 2502 for complete product installation information
2
Assumptions for table: seismic anchoring conditions, edge distance >= Cac, slab thickness >= hmin, spacing >= 3hef
3
Anchor capacities increased by a factor or 1.2 per ASCE 7-10 Section 12.4.3.3
A thru I corresponds to fastener orientation (shown on page AL21) from Table Figure 9.3.5.9.1 NFPA 13 2013.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton AL15 B-Line series Pipe Hangers & Supports
Anchor Load Charts
ASCE 7-10
Wood-Knocker™
In 3000 psi Sand Lightweight Concrete
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports AL16 Eaton
Anchor Load Charts
ASCE 7-10
Wood-Knocker™
In 3000 psi Normal Weight Cracked Concrete
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton AL17 B-Line series Pipe Hangers & Supports
Anchor Load Charts
ASCE 7-10
Wood-Knocker™
In 4000 psi Normal Weight Cracked Concrete
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports AL18 Eaton
Anchor Load Charts
ASCE 7-10
Wood-Knocker™
In 5000 psi Normal Weight Cracked Concrete
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton AL19 B-Line series Pipe Hangers & Supports
Anchor Load Charts
ASCE 7-10
Wood-Knocker™
In 6000 psi Normal Weight Cracked Concrete
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports AL20 Eaton
Anchor Load Charts
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton AL21 B-Line series Pipe Hangers & Supports
Notes
Angle Length
degree radian (rad) 1.745329 x 10-2 foot (ft) meter (m) 3.048000 x 10-1
radian (rad) degree 5.729578 x 10+1 inch (in) meter (m) 2.540000 x 10-2
mil meter (m) 2.540000 x 10-5
Area
inch (in) micrometer (μm) 2.540000 x 10+4
foot2 square meter (m2) 9.290304 x 10-2
meter (m) foot (ft) 3.280840
inch2 square meter (m2) 6.451600 x 10-4
meter (m) inch (in) 3.937008 x 10+1
circular mil square meter (m2) 5.067075 x 10-10
meter (m) mil 3.937008 x 10+4
sq. centimeter (cm2) square inch (in2) 1.550003 x 10-1
micrometer (μm) inch (in) 3.937008 x 10-5
square meter (m2) foot2 1.076391 x 10+1
square meter (m2) inch2 1.550003 x 10+3 Volume
square meter (m2) circular mil 1.973525 x 10+9 foot3 cubic meter (m3) 2.831685 x 10-2
inch3 cubic meter (m3) 1.638706 x 10-5
Temperature
cubic centimeter (cm3) cubic inch (in3) 6.102374 x 10-2
degree Fahrenheit degree Celsius t°C = (t°F - 32) / 1.8
cubic meter (m3) foot3 3.531466 x 10+1
degree Celsius degree Fahrenheit t°F = 1.8 t°C + 32
cubic meter (m3) inch3 6.102376 x 10+4
Force gallon (U.S. liquid) cubic meter (m3) 3.785412 x 10-3
pounds-force (lbf) newtons (N) 4.448222
Section Properties section modulus S (m3) S (in3) 6.102374 x 10+4
section modulus S (in3) S (m3) 1.638706 x 10-5 moment of inertia I (m4) I (in4) 2.402510 x 10+6
moment of inertia I (in4) I (m4) 4.162314 x 10-7 modulus of elasticity E (Pa) E (psi) 1.450377 x 10-4
modulus of elasticity E (psi) E (Pa) 6.894757 x 10+3
Decimals of a Foot
Inch 0" 1" 2" 3" 4" 5" 6" 7" 8" 9" 10" 11"
0 .0000 .0833 .1667 .2500 .3330 .4167 .5000 .5833 .6667 .7500 .8333 .9167
1/16 .0052 .0085 .1719 .2552 .3385 .4219 .5052 .5885 .6719 .7552 .8385 .9219
1/8 .0104 .0938 .1771 .2604 .3438 .4271 .5104 .5938 .6771 .7604 .8438 .9271
3/16 .0156 .0990 .1823 .2656 .3490 .4323 .5156 .5990 .6823 .7656 .8490 .9323
1/4 .0208 .1042 .1875 .2708 .3542 .4375 .5208 .6042 .6875 .7708 .8542 .9375
5/16 .0260 .1094 .1927 .2760 .3594 .4427 .5260 .6094 .6927 .7760 .8594 .9427
3/8 .0313 .1146 .1979 .2812 .3646 .4479 .5313 .6146 .6979 .7813 .8646 .9479
7/16 .0365 .1198 .2031 .2891 .3724 .4557 .5391 .6224 .7057 .7891 .8724 .9557
1/2 .0417 .1250 .2083 .2917 .3750 .4583 .5417 .6250 .7083 .7917 .8750 .9583
9/16 .0469 .1302 .2135 .2969 .3802 .4635 .5469 .6302 .7135 .7969 .8802 .9635
5/8 .0521 .1354 .2188 .3021 .3854 .4688 .5521 .6354 .7188 .8021 .8854 .9688
11/16 .0573 .1406 .2240 .3073 .3906 .4740 .5573 .6406 .7240 .8073 .8906 .9740
3/4 .0625 .1458 .2292 .3125 .3958 .4792 .5625 .6458 .7292 .8125 .8958 .9792
13/16 .0677 .1510 .2344 .3177 .4010 .4844 .5677 .6510 .7344 .8177 .9010 .9844
7/8 .0729 .1563 .2396 .3229 .4063 .4896 .5729 .6563 .7396 .8229 .9063 .9896
15/16 .0781 .1615 .2448 .3281 .4118 .4948 .5781 .6615 .7448 .8221 .9115 .9948
Reference Data
Decimals of a Foot
Fraction Decimal Fraction Decimal
1/32 .0312 17/32 .5312
1/16 .0625 9/16 .5625
3/32 .0937 19/32 .5937
1/8 .1250 5/8 .6250
5/32 .1562 21/32 .6562
3/16 .1875 11/16 .6875
7/32 .2187 23/32 .7187
1/4 .2500 3/4 .7500
9/32 .2812 25/32 .7812
5/16 .3125 13/16 .8125
11/32 .3437 27/32 .8437
3/8 .3750 7/8 .8750
13/32 .4062 29/32 .9062
7/16 .4375 15/16 .9375
15/32 .4687 31/32 .9687
1/2 .5000 1 1.0000
1/2" (15) .840 (21.3) .109 (2.7) .8 (1.2) .9 (1.2) 7 (2.13) 3/8"-16
3/4" (20) 1.050 (26.7) .113 (2.9) 1.1 (1.7) 1.3 (2.0) 7 (2.13) 3/8"-16
1" (25) 1.315 (33.4) .133 (3.4) 1.7 (2.5) 2.1 (3.0) 7 (2.13) 3/8"-16
11/4" (32) 1.660 (42.1) .140 (3.5) 2.3 (3.4) 2.9 (4.3) 7 (2.13) 3/8"-16
11/2" (40) 1.900 (48.2) .145 (3.7) 2.7 (4.0) 3.6 (5.3) 9 (2.74) 3/8"-16
2" (50) 2.375 (60.3) .154 (3.9) 3.6 (5.4) 5.0 (7.5) 10 (3.05) 3/8"-16
21/2" (65) 2.875 (73.0) .203 (5.1) 5.8 (8.6) 7.9 (11.7) 11 (3.35) 1/2"-13
3" (80) 3.500 (88.9) .216 (5.5) 7.6 (11.2) 10.8 (15.9) 12 (3.66) 1/2"-13
31/2" (90) 4.000 (101.6) .226 (5.7) 9.1 (13.5) 13.4 (19.8) 13 (3.96) 1/2"-13
4" (100) 4.500 (114.3) .237 (6.0) 10.8 (16.0) 16.3 (24.2) 14 (4.27) 5/8"-11
5" (125) 5.563 (141.3) .258 (6.5) 14.6 (21.7) 23.2 (34.6) 16 (4.87) 5/8"-11
6" (150) 6.625 (168.3) .280 (7.1) 19.0 (28.2) 31.5 (46.8) 17 (5.18) 3/4"-10
8" (200) 8.625 (219.1) .322 (8.2) 28.5 (42.5) 50.1 (74.6) 19 (5.79) 3/4"-10
Reference Data
10" (250) 10.750 (273.0) .365 (9.3) 40.5 (60.2) 74.6 (110.9) 22 (6.69) 7/8"-9
12" (300) 12.750 (323.8) .406 (10.3) 51.1 (75.9) 102.1 (151.9) 23 (7.01) 7/8"-9
14" (350) 14.000 (355.6) .437 (11.1) 63.0 (93.7) 121.5 (180.7) 25 (7.62) 1"-8
16" (400) 16.000 (406.4) .500 (12.7) 83.0 (123.5) 159.5 (237.3) 27 (8.23) 1"-8
18" (450) 18.000 (457.2) .563 (14.3) 105.0 (156.2) 202.2 (300.8) 28 (8.53) 1"-8
20" (500) 20.000 (508.0) .593 (15.1) 123.0 (183.0) 243.4 (361.8) 30 (9.14) 11/4"-7
24" (600) 24.000 (609.6) .687 (17.4) 171.0 (254.5) 345.2 (513.7) 32 (9.75) 11/4"-7
1/2" (15) .840 (21.3) .147 (3.7) 1.1 (1.6) 1.2 (1.7) 7 (2.13) 3/8"-16
3/4" (20) 1.050 (26.7) .154 (3.9) 1.5 (2.2) 1.7 (2.5) 7 (2.13) 3/8"-16
1" (25) 1.315 (33.4) .179 (4.5) 2.2 (3.2) 2.5 (3.6) 7 (2.13) 3/8"-16
11/4" (32) 1.660 (42.1) .191 (4.8) 3.0 (4.4) 3.5 (5.2) 7 (2.13) 3/8"-16
11/2" (40) 1.900 (48.2) .200 (5.1) 3.6 (5.4) 4.3 (6.5) 9 (2.74) 3/8"-16
2" (50) 2.375 (60.3) .218 (5.5) 5.0 (7.5) 6.3 (9.4) 10 (3.05) 3/8"-16
21/2" (65) 2.875 (73.0) .276 (7.0) 7.6 (11.4) 9.4 (14.1) 11 (3.35) 1/2"-13
3" (80) 3.500 (88.9) .300 (7.6) 10.2 (15.2) 13.0 (19.4) 12 (3.66) 1/2"-13
31/2" (90) 4.000 (101.6) .318 (8.1) 12.5 (18.6) 16.3 (24.3) 13 (3.96) 1/2"-13
4" (100) 4.500 (114.3) .337 (8.5) 15.0 (22.3) 20.0 (29.7) 14 (4.27) 5/8"-11
5" (125) 5.563 (141.3) .375 (9.5) 20.8 (30.9) 28.7 (42.6) 16 (4.87) 5/8"-11
6" (150) 6.625 (168.3) .432 (11.0) 28.6 (42.5) 39.9 (59.3) 17 (5.18) 3/4"-10
8" (200) 8.625 (219.1) .500 (12.7) 43.4 (64.5) 63.1 (93.9) 19 (5.79) 3/4"-10
Reference Data
10" (250) 10.750 (273.0) .593 (15.0) 64.4 (95.8) 95.5 (142.1) 22 (6.69) 7/8"-9
12" (300) 12.750 (323.8) .687 (17.4) 88.6 (131.8) 132.6 (197.3) 23 (7.01) 7/8"-9
14" (350) 14.000 (355.6) .750 (19.0) 107.0 (159.2) 158.2 (235.4) 25 (7.62) 1"-8
16" (400) 16.000 (406.4) .843 (21.4) 137.0 (203.9) 206.7 (306.6) 27 (8.23) 1"-8
18" (450) 18.000 (457.2) .937 (23.8) 171.0 (254.5) 259.5 (386.2) 28 (8.53) 1"-8
20" (500) 20.000 (508.0) 1.031 (26.2) 209.0 (311.0) 318.4 (473.8) 30 (9.14) 11/4"-7
24" (600) 24.000 (609.6) 1.218 (30.9) 297.0 (442.0) 455.2 (677.4) 32 (9.75) 11/4"-7
Ductile Iron
Pipe Size B3118SL B3119SL B218 B219 B379 B479 B3114R B3117R
In. (mm)
3" (80) 2 to 31/2 2 to 31/2 B218 B219-1 --- --- 31/2 2 to 31/2
4" (100) 4 to 6 4 to 6 B218 B219-2 --- --- 4 4 to 6
6" (150) 4 to 6 4 to 6 B218 B219-3 B379 --- 6 4 to 6
8" (200) 8 to 10 8 to 10 --- B219-4 B379 --- 8 8 to 10
10" (250) 8 to 10 8 to 10 --- B219-4 B379 --- 10 8 to 10
12" (300) 12 to 14 12 to 14 --- B219-5 B379 --- 12 12 to 14
14" (350) 12 to 14 12 to 14 --- --- B379 --- 14 12 to 14
16" (400) 16 to 20 16 to 20 --- --- B379 B479 16 16 to 20
18" (450) 16 to 20 16 to 20 --- --- --- B479 18 16 to 20
20" (500) 16 to 20 16 to 20 --- --- --- B479 20 16 to 20
24" (600) 24 24 --- --- --- B479 24 24
Extra Weight Cast Iron Soil Pipe Data (Bell and Spigot Type)
Nominal O.D. of Wall Weight of Pipe
Pipe Size Cast Iron Pipe Thickness Weight of Pipe Filled With Water
In. (mm) In. (mm) In. (mm) Lbs./Ft. (kg/m) Lbs./Ft. (kg/m)
Reference Data
2" (50) 2.38 (60.4) .190 (4.8) 5.0 (7.2) 6.6 (9.5)
3" (80) 3.50 (88.9) .250 (6.3) 9.0 (13.0) 12.7 (18.3)
4" (100) 4.50 (114.3) .250 (6.3) 12.0 (17.4) 18.5 (26.8)
5" (125) 5.50 (139.7) .250 (6.3) 15.0 (21.7) 25.2 (36.5)
6" (150) 6.50 (165.1) .250 (6.3) 19.0 (27.5) 33.7 (48.8)
8" (200) 8.62 (218.9) .310 (7.9) 30.0 (43.4) 56.1 (81.2)
10" (250) 10.75 (273.0) .375 (9.5) 43.0 (62.3) 83.8 (121.4)
12" (300) 12.75 (323.8) .375 (9.5) 54.0 (78.2) 112.8 (163.3)
15" (380) 15.88 (403.3) .440 (11.2) 75.0 (108.6) 166.8 (241.5)
Based on ASTM A74 - Table 1.
Reference Data
Glass Pipe Data
Regular Schedule
Nominal Wall Weight of Pipe
Pipe Size O.D. Size Thickness Weight of Pipe Filled With Water
In. (mm) In. (mm) In. (mm) Lbs./Ft.(kg/m) Lbs./Ft. (kg/m)
11/2" (40) 1.84 (46.7) .12 (3.0) .6 (.9) 1.5 (2.2)
2" (50) 2.34 (59.4) .14 (3.5) .9 (1.4) 2.3 (3.5)
3" (80) 3.41 (86.6) .17 (4.3) 1.6 (2.4) 4.8 (7.1)
4" (100) 4.53 (115.0) .20 (5.1) 2.6 (3.8) 8.4 (12.4)
6" (150) 6.66 (169.1) .24 (6.1) 4.7 (7.0) 17.5 (26.0)
Consult manufacturer for support spacing requirements.
Heavy Schedule
Nominal Wall Weight of Pipe
Pipe Size O.D. Size Thickness Weight of Pipe Filled With Water
In. (mm) In. (mm) In. (mm) Lbs./Ft.(kg/m) Lbs./Ft. (kg/m)
1" (25) 1.31 (33.3) .16 (4.0) .6 (.9) .9 (1.4)
1
1 /2" (40) 1.84 (46.7) .17 (4.3) .8 (1.3) 1.5 (2.4)
2" (50) 2.34 (59.4) .17 (4.3) 1.1 (1.6) 2.4 (3.6)
3" (80) 3.41 (86.6) .20 (5.1) 2.0 (3.0) 5.0 (7.5)
4" (100) 4.53 (115.0) .26 (6.6) 3.4 (5.0) 8.8 (13.1)
6" (150) 6.66 (169.1) .33 (8.4) 6.3 (9.4) 18.7 (27.9)
Consult manufacturer for support spacing requirements.
12" (300) 12.750 (323.8) .406 (10.3) 10.00 (14.90) 58.50 (87.00)
20°F (-6.6°C) 5.00 (1.52) 5.50 (1.67) 5.80 (1.77) 6.66 (2.03) 6.80 (2.07) 7.33 (2.23) 7.80 (2.38)
40°F (4.4°C) 4.75 (1.45) 5.25 (1.60) 5.50 (1.67) 6.33 (1.93) 6.50 (1.98) 7.00 (2.13) 7.50 (2.28)
60°F (15.5°C) 4.50 (1.37) 5.00 (1.52) 5.25 (1.60) 6.00 (1.83) 6.25 (1.90) 6.50 (1.98) 7.00 (2.13)
80°F (26.6°C) 4.25 (1.29) 4.66 (1.42) 5.00 (1.52) 5.50 (1.67) 5.80 (1.77) 6.25 (1.90) 6.80 (2.07)
100°F (37.8°C) 4.00 (1.22) 4.33 (1.32) 4.66 (1.42) 5.25 (1.60) 5.50 (1.67) 5.80 (1.77) 6.33 (1.93)
110°F (43.3°C) 3.75 (1.14) 4.00 (1.22) 4.33 (1.32) 4.80 (1.46) 5.25 (1.60) 5.50 (1.67) 5.80 (1.77)
120°F (48.9°C) 3.33 (1.01) 3.75 (1.14) 3.80 (1.16) 4.50 (1.37) 4.75 (1.45) 5.00 (1.52) 5.33 (1.62)
130°F (54.4°C) 3.00 (.91) 3.33 (1.01) 3.50 (1.06) 4.00 (1.22) 4.25 (1.29) 4.50 (1.37) 4.80 (1.46)
140°F (60.0°C) 2.66 (.81) 2.80 (.85) 3.00 (.91) 3.50 (1.16) 3.66 (1.11) 3.80 (1.16) 4.25 (1.29)
150°F (65.5°C) 2.00 (.61) 2.25 (.68) 2.50 (.76) 2.80 (.85) 3.00 (.91) 3.25 (.99) 3.50 (1.06)
Reference Data
Temperature 1/2"-3/4" (15-20) 1" (25) 11/4"-11/2" (32-40) 2" (50) 21/2" (65) 3" (80) 4" (100) 6" (150)
20°F (-6.6°C) 5.75 (1.75) 6.33 (1.93) 6.66 (2.03) 7.00 (2.13) 7.80 (2.38) 8.20 (2.50) 8.66 (2.64) 9.80 (2.99)
40°F (4.4°C) 5.50 (1.67) 6.00 (1.83) 6.33 (1.93) 6.50 (1.98) 7.50 (2.28) 7.75 (2.36) 8.25 (2.51) 9.33 (2.84)
60°F (15.5°C) 5.25 (1.60) 5.75 (1.75) 6.00 (1.83) 6.25 (1.90) 7.00 (2.13) 7.33 (2.23) 7.80 (2.38) 8.80 (2.68)
80°F (26.6°C) 4.80 (1.46) 5.33 (1.62) 5.66 (1.72) 6.00 (1.83) 6.66 (2.03) 7.00 (2.13) 7.33 (2.23) 8.33 (2.54)
100°F (37.8°C) 4.50 (1.37) 5.00 (1.52) 5.25 (1.60) 5.50 (1.67) 6.33 (1.93) 6.50 (1.98) 6.80 (2.07) 7.80 (2.38)
110°F (43.3°C) 4.33 (1.32) 4.60 (1.40) 4.80 (1.46) 5.12 (1.56) 5.80 (1.77) 6.00 (1.83) 6.33 (1.93) 7.33 (2.23)
120°F (48.9°C) 3.80 (1.16) 4.33 (1.32) 4.50 (1.37) 4.75 (1.45) 5.33 (1.62) 5.50 (1.67) 5.80 (1.77) 6.50 (1.98)
130°F (54.4°C) 3.50 (1.06) 3.80 (1.16) 4.00 (1.22) 4.33 (1.32) 4.75 (1.45) 5.00 (1.52) 5.25 (1.60) 6.00 (1.83)
140°F (60.0°C) 3.00 (.91) 3.33 (1.01) 3.50 (1.06) 3.66 (1.11) 4.25 (1.29) 4.33 (1.32) 4.66 (1.42) 5.12 (1.55)
150°F (65.5°C) 2.50 (.76) 2.75 (.84) 3.00 (.91) 3.12 (.95) 3.33 (1.01) 3.50 (1.06) 3.75 (1.14) 4.25 (1.29)
Hanger spacing for PVC plastic Pipe assumes fluid loads up to 1.35 specific gravity [85 Lbs./Ft.3 (136.5 kg/m3)] but not concentrated heavy loads.
Based on NFPA 13-1999, Table 6-2.2 & Table 6-1.4.1 5"-8" (125-200) 15 (4.57) 1/2"-13
Reference Data
S7 x 15.3 (S180 x 22.8) 35/8" (93) 0.392 (10.0) C6 x 10.5 (C150 x 15.6) 2" (51) 0.343 (8.7)
S7 x 20 (S180 x 29.8) 37/8" (98) 0.392 (10.0) C6 x 13 (C150 x 19.3) 21/8" (54) 0.343 (8.7)
S8 x 18.4 (S200 x 27.4) 4" (102) 0.425 (10.8) C7 x 9.8 (C180 x 14.6) 21/16" (54) 0.366 (9.3)
S8 x 23 (S200 x 34) 41/8" (106) 0.425 (10.8) C7 x 12.25 (C180 x 18.2) 23/16" (55) 0.366 (9.3)
S10 x 25.4 (S250 x 37.8) 45/8" (118) 0.491 (12.5) C7 x 14.75 (C180 x 22) 21/4" (57) 0.366 (9.3)
S10 x 35 (S250 x 52) 415/16" (126) 0.491 (12.5) C8 x 11.5 (C200 x 17.1) 21/4" (57) 0.390 (9.9)
S12 x 31.8 (S310 x 47.3) 5" (127) 0.544 (13.8) C8 x 13.75 (C200 x 20.5) 23/8" (59) 0.390 (9.9)
S12 x 35 (S310 x 52) 51/16" (129) 0.544 (13.8) C8 x 18.75 (C200 x 27.9) 21/2" (63) 0.390 (9.9)
S12 x 40.8 (S310 x 60.7) 51/4" (133) 0.659 (16.7) C9 x 13.4 (C230 x 19.9) 27/16" (61) 0.413 (10.5)
S12 x 50 (S310 x 74) 51/2" (139) 0.659 (16.7) C9 x 15 (C230 x 22) 21/2" (63) 0.413 (10.5)
S15 x 42.9 (S380 x 64) 51/2" (140) 0.622 (15.8) C9 x 20 (C230 x 30) 25/8" (67) 0.413 (10.5)
S15 x 50 (S380 x 74) 55/8" (143) 0.622 (15.8) C10 x 15.3 (C250 x 22.8) 25/8" (67) 0.436 (11.1)
S18 x 54.7 (S460 x 81.4) 6" (152) 0.691 (17.6) C10 x 20 (C250 x 30) 23/4" (69) 0.436 (11.1)
S18 x 70 (S460 x 104) 61/4" (159) 0.691 (17.6) C10 x 25 (C250 x 37) 27/8" (72) 0.436 (11.1)
S20 x 66 (S510 x 98.2) 61/4" (159) 0.795 (20.2) C10 x 30 (C250 x 45) 3" (76) 0.436 (11.1)
S20 x 75 (S510 x 112) 63/8" (162) 0.795 (20.2) C12 x 20.7 (C310 x 30.8) 15
2 /16" (74) 0.501 (12.7)
S20 x 86 (S510 x 128) 71/16" (179) 0.920 (23.4) C12 x 25 (C310 x 37) 3" (76) 0.501 (12.7)
S20 x 96 (S510 x 143) 73/16" (183) 0.920 (23.4) C12 x 30 (C310 x 45) 31/8" (80) 0.501 (12.7)
S24 x 80 (S610 x 119) 7" (178) 0.870 (22.1) C15 x 33.9 (C380 x 50.4) 33/8" (86) 0.650 (16.5)
S24 x 90 (S610 x 134) 71/8" (181) 0.870 (22.1) C15 x 40 (C380 x 60) 31/2" (89) 0.650 (16.5)
S24 x 100 (S610 x 149) 71/4" (184) 0.870 (22.1) C15 x 50 (C380 x 74) 33/4" (94) 0.650 (16.5)
S24 x 106 (S610 x 158) 77/8" (200) 1.090 (27.7) C18 x 42.7 (C460 x 63.5) 4" (102) 0.625 (15.8)
S24 x 121 (S610 x 180) 81/16" (204) 1.090 (27.7) C18 x 45.8 (C460 x 68.1) 4" (102) 0.625 (15.8)
Dimensions taken from ASTM A6-86. C18 x 51.9 (C460 x 77.2) 41/8" (106) 0.625 (15.8)
C18 x 58 (C460 x 86.3) 41/4" (112) 0.625 (15.8)
W8 x 18 (W200 x 26.6) 51/4" (133) 0.330 (8.4) W12 x 58 (W310 x 86) 10" (254) 0.640 (16.3)
W8 x 21 (W200 x 31.3) 51/4" (133) 0.400 (10.2) W12 x 65 (W310 x 97) 12" (306) 0.605 (15.4)
W8 x 24 (W200 x 35.9) 61/2" (165) 0.400 (10.2) W12 x 72 (W310 x 107) 12" (306) 0.670 (17.0)
W8 x 28 (W200 x 41.7) 61/2" (166) 0.465 (11.8) W12 x 79 (W310 x 117) 121/16" (307) 0.735 (18.7)
W8 x 31 (W200 x 46.1) 8" (203) 0.435 (11.0) W12 x 87 (W310 x 129) 121/8" (308) 0.810 (20.6)
W8 x 35 (W200 x 52) 8" (203) 0.495 (12.6) W12 x 96 (W310 x 143) 121/8" (308) 0.900 (22.9)
W8 x 40 (W200 x 59) 81/16" (205) 0.560 (14.2) W12 x 106 (W310 x 158) 121/4" (310) 0.990 (25.1)
W8 x 48 (W200 x 71) 81/8" (206) 0.685 (17.4) W12 x 120 (W310 x 179) 125/16" (313) 1.105 (28.1)
W8 x 58 (W200 x 86) 81/4" (209) 0.810 (20.6) W12 x 136 (W310 x 202) 123/8" (315) 1.250 (31.8)
W8 x 67 (W200 x 100) 81/4" (210) 0.935 (23.7) W12 x 152 (W310 x 226) 121/2" (317) 1.400 (35.6)
W10 x 12 (W250 x 17.9) 4" (101) 0.210 (5.3) W12 x 170 (W310 x 253) 129/16" (319) 1.560 (39.6)
W10 x 15 (W250 x 22.3) 4" (101) 0.270 (6.9) W12 x 190 (W310 x 283) 1211/16" (322) 1.735 (44.1)
W10 x 17 (W250 x 25.3) 4" (101) 0.330 (8.4) W12 x 210 (W310 x 313) 123/4" (325) 1.900 (48.3)
W10 x 19 (W250 x 28.4) 4" (101) 0.395 (10.0) W12 x 230 (W310 x 342) 127/8" (328) 2.070 (52.6)
W10 x 22 (W250 x 32.7) 53/4" (146) 0.360 (9.1) W12 x 252 (W310 x 375) 13" (330) 2.250 (57.2)
W10 x 26 (W250 x 38.5) 53/4" (147) 0.440 (11.2) W14 x 22 (W360 x 32.9) 5" (127) 0.335 (8.5)
W10 x 30 (W250 x 44.8) 513/16" (148) 0.510 (13.0) W14 x 26 (W360 x 39.0) 5" (127) 0.420 (10.7)
W10 x 33 (W250 x 49.1) 715/16" (202) 0.435 (11.0) W14 x 30 (W360 x 44.8) 63/4" (172) 0.385 (9.8)
W10 x 39 (W250 x 58) 8" (203) 0.530 (13.5) W14 x 34 (W360 x 51) 63/4" (172) 0.455 (11.6)
W10 x 45 (W250 x 67) 8" (203) 0.620 (15.7) W14 x 38 (W360 x 57) 63/4" (172) 0.515 (13.1)
W10 x 49 (W250 x 73) 10" (254) 0.560 (14.2) W14 x 43 (W360 x 64) 8" (202) 0.530 (13.5)
W10 x 54 (W250 x 80) 101/16" (255) 0.615 (15.6) W14 x 48 (W360 x 72) 8" (202) 0.595 (15.1)
W10 x 60 (W250 x 89) 101/16" (256) 0.680 (17.3) W14 x 53 (W360 x 79) 81/16" (205) 0.660 (16.8)
W10 x 68 (W250 x 101) 101/8" (257) 0.770 (19.6) W14 x 61 (W360 x 91) 10" (254) 0.645 (16.4)
W10 x 77 (W250 x 115) 103/16" (259) 0.870 (22.1) W14 x 68 (W360 x 101) 10" (254) 0.720 (18.3)
W10 x 88 (W250 x 131) 101/4" (261) 0.990 (25.1) W14 x 74 (W360 x 110) 101/16" (256) 0.785 (19.9)
W10 x 100 (W250 x 149) 103/8" (263) 1.120 (28.4) W14 x 82 (W360 x 122) 101/8" (257) 0.855 (21.7)
W10 x 112 (W250 x 167) 107/16" (265) 1.250 (31.8) W14 x 90 (W360 x 134) 141/2" (369) 0.710 (18.0)
Dimensions taken from ASTM A6-86. (Continued on next page)
Reference Data
W16 x 31 (W410 x 46.1) 51/2" (140) 0.440 (11.2) W24 x 162 (W610 x 241) 1215/16" (328) 1.220 (31.0)
W16 x 36 (W410 x 53) 7" (178) 0.430 (10.9) W27 x 84 (W690 x 125) 915/16" (252) 0.640 (16.3)
W16 x 40 (W410 x 60) 7" (178) 0.505 (12.8) W27 x 94 (W690 x 140) 10" (254) 0.745 (18.9)
W16 x 45 (W410 x 67) 7" (178) 0.565 (14.4) W27 x 102 (W690 x 152) 10" (254) 0.830 (21.1)
W16 x 50 (W410 x 75) 71/16" (179) 0.630 (16.0) W27 x 114 (W690 x 170) 101/16" (255) 0.930 (23.6)
W16 x 57 (W410 x 85) 71/8" (181) 0.715 (18.2) W27 x 146 (W690 x 217) 1315/16" (354) 0.975 (24.8)
W16 x 67 (W410 x 100) 101/4" (260) 0.665 (16.9) W27 x 161 (W690 x 240) 14" (355) 1.080 (27.4)
W16 x 77 (W410 x 114) 105/16" (262) 0.760 (19.3) W27 x 178 (W690 x 265) 141/16" (357) 1.190 (30.2)
W16 x 89 (W410 x 132) 103/8" (263) 0.875 (22.2) W30 x 99 (W760 x 147) 107/16" (265) 0.670 (17.0)
W16 x 100 (W410 x 149) 107/16" (265) 0.985 (25.0) W30 x 108 (W760 x 161) 101/2" (267) 0.760 (19.3)
W18 x 35 (W460 x 52) 6" (152) 0.425 (10.8) W30 x 116 (W760 x 173) 101/2" (267) 0.850 (21.6)
W18 x 40 (W460 x 60) 6" (152) 0.525 (13.3) W30 x 124 (W760 x 185) 101/2" (267) 0.930 (23.6)
W18 x 46 (W460 x 68) 61/16" (154) 0.605 (15.4) W30 x 132 (W760 x 196) 109/16" (268) 1.000 (25.4)
W18 x 50 (W460 x 74) 71/2" (190) 0.570 (14.5) W30 x 173 (W760 x 257) 15" (381) 1.065 (27.1)
W18 x 55 (W460 x 82) 71/2" (190) 0.630 (16.0) W30 x 191 (W760 x 284) 15" (381) 1.185 (30.1)
W18 x 60 (W460 x 89) 79/16" (192) 0.695 (17.7) W30 x 211 (W760 x 314) 151/8" (384) 1.315 (33.4)
W18 x 65 (W460 x 97) 79/16" (192) 0.750 (19.0) W33 x 118 (W840 x 176) 111/2" (292) 0.740 (18.8)
W18 x 71 (W460 x 106) 75/8" (193) 0.810 (20.6) W33 x 130 (W840 x 193) 111/2" (292) 0.855 (21.7)
W18 x 76 (W460 x 113) 11" (279) 0.680 (17.3) W33 x 141 (W840 x 210) 111/2" (292) 0.960 (24.4)
W18 x 86 (W460 x 128) 111/16" (281) 0.770 (19.6) W33 x 152 (W840 x 226) 119/16" (294) 1.055 (26.8)
W18 x 97 (W460 x 144) 111/8" (282) 0.870 (22.1) W33 x 201 (W840 x 299) 153/4" (400) 1.150 (29.2)
W18 x 106 (W460 x 158) 113/16" (284) 0.940 (23.9) W36 x 135 (W920 x 201) 1115/16" (303) 0.790 (20.1)
W18 x 119 (W460 x 177) 111/4" (286) 1.060 (26.9) W36 x 150 (W920 x 223) 12" (305) 0.940 (23.9)
W21 x 44 (W530 x 66) 61/2" (165) 0.450 (11.4) W36 x 160 (W920 x 238) 12" (305) 1.020 (25.9)
W21 x 50 (W530 x 74) 61/2" (165) 0.535 (13.6) W36 x 170 (W920 x 253) 12" (305) 1.100 (27.9)
W21 x 57 (W530 x 85) 69/16" (167) 0.650 (16.5) W36 x 182 (W920 x 271) 121/16" (306) 1.180 (30.0)
W21 x 62 (W530 x 92) 81/4" (209) 0.615 (15.6) W36 x 194 (W920 x 289) 121/8" (308) 1.260 (32.0)
W21 x 68 (W530 x 101) 81/4" (209) 0.685 (17.4) W36 x 210 (W920 x 313) 123/16" (309) 1.360 (34.5)
11/2" x 11/2" x 3/16" 11/2" x 11/2" x 3/16" 11/2" x 11/2" x 3/16" 2" x 11/2" x 3/16"
18" (457.2)
B26SH B26SH B26SH B22SH
11/2" x 11/2" x 3/16" 2" x 11/2" x 3/16" 2" x 11/2" x 3/16" 2" x 11/2" x 3/16"
24" (609.6)
B26SH B22SH B22SH B22SH
2" x 11/2" x 3/16" 2" x 11/2" x 3/16" 2" x 11/2" x 3/16" 2" x 11/2" x 3/16"
30" (762.0)
B22SH B22SH B22SH B22SH
2" x 11/2" x 3/16" 2" x 11/2" x 3/16" 21/2" x 11/2" x 3/16" 21/2" x 11/2" x 3/16"
36" (914.4)
B22SH B22SH B12SH B12SH
21/2" x 11/2" x 3/16" 21/2" x 11/2" x 3/16" 21/2" x 11/2" x 3/16" 3" x 2" x 3/16"
48" (1219.2)
B12SH B12SH B12SH B11SH
21/2" x 11/2" x 3/16" 21/2" x 11/2" x 3/16" 3" x 2" x 3/16" 3" x 2" x 3/16"
60" (1524.0)
B12SH B12SH B11SH B11SH
21/2" x 11/2" x 3/16" 3" x 2" x 3/16" 3" x 2" x 3/16" 3" x 2" x 1/4"
72" (1828.8)
Reference Data
3" x 2" x 3/16" 3" x 2" x 3/16" 3" x 2" x 1/4" 3" x 2" x 1/4"
84" (2133.6)
B11SH B11SH B11SH B11SH
3" x 2" x 3/16" 3" x 2" x 1/4" 3" x 2" x 1/4" 31/2" x 21/2" x 5/16"
96" (2438.4)
B11SH B11SH B11SH B12SHA
3" x 2" x 3/16" 3" x 2" x 1/4" 31/2" x 21/2" x 5/16" 31/2" x 21/2" x 5/16"
108" (2743.2)
B11SH B11SH B12SHA B12SHA
3" x 2" x 1/4" 3" x 2" x 1/4" 31/2" x 21/2" x 5/16" 31/2" x 21/2" x 5/16"
120" (3048.0)
B11SH B11SH B12SHA B12SHA
Based on NFPA 13-1999, Table 6-1.1.3 (a) & Table 6-1.1.3 (b).
2" x 11/2" x 3/16" 21/2" x 11/2" x 3/16" 3" x 2" x 3/16" 3" x 2" x 1/4"
18" (457.2)
B22SH B12SH B11SH B11SH
21/2" x 11/2" x 3/16" 21/2" x 11/2" x 3/16" 3" x 2" x 3/16" 3" x 2" x 1/4"
24" (609.6)
B12SH B12SH B11SH B11SH
21/2" x 11/2" x 3/16" 3" x 2" x 3/16" 3" x 2" x 1/4" 3" x 2" x 1/4"
30" (762.0)
B12SH B11SH B11SH B11SH
3" x 2" x 3/16" 3" x 2" x 3/16" 31/2" x 21/2" x 1/4" 31/2" x 21/2" x 5/16"
36" (914.4)
B11SH B11SH B12SHA B12SHA
3" x 2" x 3/16" 3" x 2" x 1/4" 31/2" x 21/2" x 5/16" 4" x 3" x 5/16"
48" (1219.2)
B11SH B11SH B12SHA B12SHA
3" x 2" x 1/4" 31/2" x 21/2" x 5/16" 4" x 3" x 5/16" 5" x 31/2" x 5/16"
60" (1524.0)
B11SH B12SHA B12SHA B11SHA
31/2" x 21/2" x 5/16" 4" x 3" x 5/16" 4" x 3" x 5/16" 5" x 31/2" x 5/16"
Reference Data
72" (1828.8)
B12SHA B12SHA B12SHA B11SHA
31/2" x 21/2" x 5/16" 4" x 3" x 5/16" 5" x 31/2" x 5/16" 6" x 4" x 1/4"
84" (2133.6)
B12SHA B12SHA B11SHA B12SHA4
31/2" x 21/2" x 5/16" 4" x 3" x 5/16" 5" x 31/2" x 5/16" 6" x 4" x 1/4"
96" (2438.4)
B12SHA B12SHA B11SHA B12SHA4
31/2" x 21/2" x 5/16" 4" x 3" x 5/16" 5" x 31/2" x 5/16" 6" x 4" x 3/8"
108" (2743.2)
B12SHA B12SHA B11SHA B11SHA4
4" x 3" x 5/16" 5" x 31/2" x 5/16" 6" x 4" x 1/4" 6" x 4" x 3/8"
120" (3048.0)
B12SHA B11SHA B12SHA4 B11SHA4
Based on NFPA 13-1999, Table 6-1.1.3 (a) & Table 6-1.1.3 (b).
B3293, B3295
Type 8 B3373CT Type 8 Type 29 Type 29
B3297
Type 8 B3373CTC Type 8
Type 30 B3054 Type 30
Type 10 200 Type 10
Type 31 B3065 Type 32
Type 10 200C Type 10
Type 31 B3068 Type 32
Type 10 200F Type 10
Type 32 B3066 Type 33
Type 10 200H Type 10
Type 33 B3067 Type 34
Type 10 2 Type 10
Type 34 B3058 Type 35
Type 10 B3170CT Type 10
Type 34 B3060 Type 35
Type 10 B3170CTC Type 10
Type 34 B3060L Type 35
Type 10 2F Type 10
Type 34 B3062 Type 35
Type 12 B3198H Type 25
Type 34 B3070 Type 35
Type 12 B3198HCT Type 25
Type 35 B3891-B3897 Type 35
Type 12 B3198R Type 25
Type 35 B3991 & B3993 Type 35
Type 12 B3198RCT Type 25
Type 36 B3095 Type 37
Type 13 B3202 Type 13
Type 37 B3090 Type 38
Type 14 B3201 Type 14
Type 37 B3092 Type 38
Type 15 B3224 Type 15
Type 37 B3094 Type 38
Type 15 B3224CT Type 15
Type 37 B3097 Type 38
Type 16 B3222 Type 16
Type 38 B3093 Type 39
Type 17 B3200 Type 17
Type 38 B3096 Type 39
Type 18 B22I, B32I, B52I --
Type 39A & 39B B3160-B3165 Type 40A & 40B
Type 18 B2500 Type 19
Type 40 B3151 Type 41
Type 18 B2503 --
Type 41 B3114 Type 42
Type 18 B2505-B2508 --
Type 41 B3122 Type 42
Type 18 B3014 Type 18
Type 41 B3122A Type 42
Type 19 65 Type 23
Type 43 B3110 Type 44
Type 19 65XT Type 23
Type 44 B3117SL Type 45
Type 19 66 Type 23
Type 44 B3120 Type 45
Type 19 67SS --
Type 45 B3119SL Type 46
Type 19 68S Type 23
Type 46 B3118SL Type 47
Type 19 68SS --
Type 48 B3262 Type 49
Type 19 68W Type 23
Type 49 B3264 Type 50
Type 19 B303-B309 Type 19
Type 57 B3080S & L --
* For all finishes excluding plain.
Reference Data
Type 4 B3140 Type 4
Type 32 B3065 Type 31
Type 4 B3141 Type 4
Type 32 B3068 Type 31
Type 4 B3142 Type 4
Type 33 B3066 Type 32
Type 6 B3171 Type 6
Type 34 B3067 Type 33
Type 8 B3373 Type 8
Type 35 B3058 Type 34
Type 8 B3373C Type 8
Type 35 B3060 Type 34
Type 8 B3373CT Type 8
Type 35 B3060L Type 34
Type 8 B3373CTC Type 8
Type 35 B3062 Type 34
Type 10 200 Type 10
Type 35 B3070 Type 34
Type 10 200C Type 10
Type 35 B3891-B3897 Type 35
Type 10 200F Type 10
Type 35 B3991 & B3993 Type 35
Type 10 200H Type 10
Type 37 B3095 Type 36
Type 10 2 & 2F Type 10
Type 38 B3090 Type 37
Type 10 B3170CT Type 10
Type 38 B3092 Type 37
Type 10 B3170CTC Type 10
Type 38 B3094 Type 37
Type 12 B3104 Type 1*
Type 38 B3097 Type 37
Type 12 B3104C Type 1*
Type 39 B3093 Type 38
Type 12 B3104CT Type 1
Type 39 B3096 Type 38
Type 13 B3202 Type 13
Type 40A & 40B B3160-3165 Type 39A & 39B
Type 14 B3201 Type 14
Type 41 B3151 Type 40
Type 15 B3224 Type 15
Type 42 B3114 Type 41
Type 15 B3224CT Type 15
Type 42 B3122 Type 41
Type 16 B3222 Type 16
Type 42 B3122A Type 41
Type 17 B3200 Type 17
Type 44 B3110 Type 43
Type 18 B3014 Type 18
Type 45 B3117SL Type 44
Type 19 B303-B309 Type 19
Type 45 B3120 Type 44
Type 19 B321 Type 19
Type 46 B3119SL Type 45
Type 19 B2500 Type 18
Type 47 B3118SL Type 46
Type 19 B3031 Type 19
Type 49 B3262 Type 48
Type 19 & 23 B3033 Type 19 & 23
Type 50 B3264 Type 49
Type 19 & 23 B3034 Type 19 & 23
Type 53 B3045 Type 25
Type 21 B3050 Type 21
Type 54 B3040 Type 27
Type 21 B3055 Type 21
Type 22 B3083 Type 22 * For all finishes excluding plain.
Note: Refer to the catalog page for specific sizes that are UL Listed and/or FM Approved.
Reference Data
B3117SL Type 44 Type 45 -- -- B3690C Type 5 Type 5 -- --
B3118SL Type 46 Type 47 -- -- B3690F Type 5 Type 5 -- --
B3119SL Type 45 Type 46 -- -- B3891-B3897 Type 35 Type 35 -- --
B3120 Type 44 Type 45 -- -- B3991 Type 35 Type 35 -- --
B3122 Type 41 Type 42 -- -- B3993 Type 35 Type 35 -- --
B3122A Type 41 Type 42 -- -- B3993A Type 35 Type 35 -- --
B3140 Type 4 Type 4 Yes Yes
B3141 Type 4 Type 4 -- --
B3142 Type 4 Type 4 -- --
B3144 Type 3 Type 3 -- --
B3146 Type 3 Type 3 -- --
B3151 Type 40 Type 41 -- --
B3160-B3165 Type 39A & 39B Type 40A & 40B -- --
B3170CT Type 10 Type 10 -- --
B3170CTC Type 10 Type 10 -- --
B3180 Type 26 Type 26 -- --
B3180FL Type 26 Type 26 -- --
B3184 -- -- Yes --
B3188 Type 24 Type 24 Yes --
B3188C Type 24 Type 24 -- --
B3198H Type 12 Type 25 -- --
B3198HCT Type 12 Type 25 -- --
B3198R Type 12 Type 25 -- --
B3198RCT Type 12 Type 25 -- --
B3200 Type 17 Type 17 -- --
B3201 Type 14 Type 14 -- --
B3202 Type 13 Type 13 -- --
B3203 -- -- Yes --
Note: Refer to the catalog page for specific sizes that are UL Listed and/or FM Approved.
B3098 ............................ 313 (Disc.) B3161 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261 (Disc.) B3224 ............................ 306 (Disc.)
B3100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (Disc.) B3162 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262 (Disc.) B3227 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
B3100C . . . . . . . . . . . . . . . . . . . . . . . . 1PVC (Disc.) B3163 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263 (Disc.) B3234 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 (Disc.)
B3100F . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1F (Disc.) B3164 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264 (Disc.) B3248 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 (Disc.)
B3100PS (Disc.) . . . . . . . . . . . . . . . . . . . . . . 1CBS B3165 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265 (Disc.) B3256 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405 (Disc.)
B3102 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1CI (Disc.) B3170 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 B3257 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406 (Disc.)
B3104 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1LD (Disc.) B3170CT . . . . . . . . . . . . . . . . . . . . . . . . . 202 (Disc.) B3262 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506 (Disc.)
B3104C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3170CTC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3264 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 (Disc.)
B3104CT . . . . . . . . . . . . . . . . . . . . . . . . . . 81 (Disc.) B3170F (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2F B3281 - B3287 . . . . . . . . . . . . . . . . . . 420 (Disc.)
B3104CTC . . . . . . . . . . . . . . . . . . . 81PVC (Disc.) B3170NF (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . 200 B3281 - B3287 . . . . . . . . . . . . . . . . . . 421 (Disc.)
B3104F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3170NF (Disc.) . . . . . . . . . . . . . . 200R (Disc.) B3281 - B3287 . . . . . . . . . . . . . . . . . . 422 (Disc.)
B3106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1V (Disc.) B3170NFC (Disc.) . . . . . . . . . . . . . . . . . . . . . 200C B3281 - B3287 . . . . . . . . . . . . . . . . . 422C (Disc.)
B3106V . . . . . . . . . . . . . . . . . . . . . . . . . . 1VT (Disc.) B3170NFF (Disc.) . . . . . . . . . . . . . . . . . . . . . . 200F B3291 - B3298 . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
B3108 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1A (Disc.) B3171 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3362 - B3365 . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
B3109 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3175 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3367 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
B3110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 (Disc.) B3175CT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3373 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 (Disc.)
B3114 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322 (Disc.) B3180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 (Disc.) B3373C . . . . . . . . . . . . . . . . . . . . . . . . 6PVC (Disc.)
B3114R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3180FL . . . . . . . . . . . . . . . . . . . . . . . . . 20S (Disc.) B3373CT . . . . . . . . . . . . . . . . . . . . . . . . . . 82 (Disc.)
B3117R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3181 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 B3373CTC . . . . . . . . . . . . . . . . . . . 82PVC (Disc.)
Reference Data
B3117SL . . . . . . . . . . . . . . . . . . . . . . . . . 327 (Disc.) B3182 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 B3373F . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6F (Disc.)
B3118SL . . . . . . . . . . . . . . . . . . . . . . . . . 328 (Disc.) B3183 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 B3380 - B3387 . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
B3119SL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3184 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3690 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 (Disc.)
B3120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 (Disc.) B3188 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 (Disc.) B3690C . . . . . . . . . . . . . . . . . . . . . . . . 3PVC (Disc.)
B3122 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326 (Disc.) B3188C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3690F . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3F (Disc.)
B3122A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3190 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 (Disc.) B3891 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425 (Disc.)
B3124 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3191 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 (Disc.) B3891 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426 (Disc.)
B3126 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ROL-16 B3195 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 (Disc.) B3891 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429 (Disc.)
B3132 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 (Disc.) B3195CT . . . . . . . . . . . . . . . . . . . . . . . . . . 83 (Disc.) B3892 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430 (Disc.)
B3132W-1 &11/2 . . . . . . . . . . . . . . . . 9X (Disc.) B3198H . . . . . . . . . . . . . . . . . . . . . . . . . . 302 (Disc.) B3894 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
B3134 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 (Disc.) B3198HCT . . . . . . . . . . . . . . . . . . . . 301CT (Disc.) B3895 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
B3134W . . . . . . . . . . . . . . . . . . . . . . . . . 14X (Disc.) B3199R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 B3993-10 . . . . . . . . . . . . . . . . . . . . . . . . 428 (Disc.)
B3140 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 (Disc.) B3199RCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3393-10/B3393-10B . . . . . . . . . . 431 (Disc.)
B3140C . . . . . . . . . . . . . . . . . . . . . . . . 4PVC (Disc.) B3200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330 (Disc.) DS15x2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 (Disc.)
B3140F . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4F (Disc.) B3201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332 (Disc.) DURA-BLOK™ . . . . . . . . . . . Pipe Pier (Disc.)
B3141 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4CI (Disc.) B3202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331 (Disc.) FFW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 (Disc.)
B3142 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4H (Disc.) B3203 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333 (Disc.) FW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 (Disc.)
B3144 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 (Disc.) B3205 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 (Disc.) HHN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 (Disc.)
B3146 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5H (Disc.) B3210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 (Disc.) HN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 (Disc.)
B3147A-1/2 thru 4 . . . 32-1/2 thru 4 (Disc.) B3210X . . . . . . . . . . . . . . . . . . . . . . . . . 102L (Disc.) ISO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
B3147B 4 thru 24 . . . . . 32-5 thru 34 (Disc.) B3211 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 (Disc.) KwikClips™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
B3148 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 (Disc.) B3211X . . . . . . . . . . . . . . . . . . . . . . . . . 101L (Disc.) LW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 (Disc.)
B3149 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 (Disc.) B3212 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 (Disc.) N2500 . . . . . . . . . . . . . . . . . . . . . . . . . . 310N (Disc.)
B3151 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 (Disc.) B3213 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 (Disc.) Snap ‘N Shields™ Clevis Hangers . . N/A
B3153 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 (Disc.) B3214 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 (Disc.) Snap ‘N Shields™ . . . . . . . . . . . . . . . . . . . . . N/A
B3154 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 (Disc.) B3220 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 (Disc.) Toggle Bolts . . . . . . . . . . . . . . . . . . . . 123 (Disc.)
B3155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 (Disc.) B3222 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307 (Disc.)
B3160 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 (Disc.) B3223 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
Reference Data
323 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 986 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 986
324 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3110 990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 990
325 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3120 991 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 991
326 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3122 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000
327 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . B3117SL 1001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1001
328 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . B3118SL 2002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2002
329 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3054 Pipe Pier (Disc.) . . . . . . . . . . . . . . DURA-BLOK
330 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3200
331 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3202
332 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3201
333 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3203
335 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3045
336 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3040
337 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3082
343 (Disc.) . . . . . . . . . . . . . . . . . . . . B3080 L & S
405 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3256
406 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3257
420 (Disc.) . . . . . . . . . . . . . . . . . . B3281 - B3287
421 (Disc.) . . . . . . . . . . . . . . . . . . B3281 - B3287
422 (Disc.) . . . . . . . . . . . . . . . . . . B3281 - B3287
422C (Disc.) . . . . . . . . . . . . . . . . B3281 - B3287
425 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3891
426 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3891
426A (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
426AC (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
426AG (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
426C (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
426G (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
427 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
428 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . B3993-10
14 ........................... B3040 (Fig. 336) 165 ......................... B3165 (Fig. 265) 438-1 ....................... Consult Factory
40 .......................... Consult Factory 167 ......................... B3151 (Fig. 220) 438-2 ....................... Consult Factory
47 ............................ B3084 (Fig. 33) 168 ......................... B3153 (Fig. 219) 438-3 ....................... Consult Factory
49 ............................ B3086 (Fig. 34) 171 ......................... B3114 (Fig. 322) 590 ......................... B3102 (Fig. 1CI)
51 ........................................ B422 175 ......................... B3120 (Fig. 325) 594 ...................... B3134W (Fig. 14X)
52 ............................ B3085 (Fig. 35) 177 ......................... B3122 (Fig. 326) 595 ........................... B3134 (Fig. 14)
54 .......................... Consult Factory 178 ......................... B3264 (Fig. 500) 599 ............. B3132W-1 & 11/2 (Fig. 9X)
55 ............................... B3080 L & S 181 ......................... B3110 (Fig. 324) 600 ............................ B3132 (Fig. 9)
(Fig. 343 LONG & 191 ......................... B3098 (Fig. 313) 218, 229 .................... B3054 (Fig. 329)
FG 343 SHORT)
192 ......................... B3096 (Fig. 312)
60 ........................... B3248 (Fig. 118)
194 ........................... B3068 (Fig. 30)
62 .......................... Consult Factory
195 ........................ B3066 (Fig. 30M)
63 .......................... Consult Factory
199 ......................... B3067 (Fig. 30H)
CT65 ..................... B3104CT (Fig. 81)
202 ........................... B3060 (Fig. 50)
66 ........................... B3083 (Fig.305)/
206 ..................................... Fig. 51
B3083WO (Fig. 304)
212 ............................ B3140 (Fig. 4)
67 ............................. B3690 (Fig. 3)
212FP ................................. Fig. 4A
68 .......................... Consult Factory
216 .......................... B3142 (Fig. 4H)
69 ....................... Fig. 200 (B3170NF)
Reference Data
10 .............................. HN (Fig. 113) 360 ......................... B3054 (Fig. 329) 640-2 ................................... B3892
10H .......................... HHN (Fig. 114) 361 ........................... B3050 (Fig. 62) 640-3 ................. B3393-10/B3393-10B
11 .............................. FW (Fig. 115) 363 ......................... B3040 (Fig. 336) 651 ............... B3281 - B3287 (Fig. 421)
12 ............................. FFW (Fig. 119) 367 ......................... B3045 (Fig. 335) 651 ............... B3281 - B3287 (Fig. 421)
13 .............................. LW (Fig. 117) 370A ..................... Fig. 109A (B3019) 700 ............................ B3148 (Fig. 7)
25 ............................. B655 (Fig. 70) 371 .............................. B3080 L & S 705 ............................ B3149 (Fig. 8)
25R .......................... B656 (Fig. 70R) (Fig. 343 LONG & 720 ......................... B3095 (Fig. 317)
Fig. 343 SHORT)
25S ........................ B655S (Fig. 70S) 721 ......................... B3090 (Fig. 318)
373 ........................... B3084 (Fig. 33)
26 ........................... B3203 (Fig. 333) 724 ......................... B3098 (Fig. 313)
374 ........................... B3086 (Fig. 34)
30 ........................... B3202 (Fig. 331) 420 ..................... B3100C (Fig. 1PVC)
374A ......................... B3085 (Fig. 35)
31 ........................... B3201 (Fig. 332) 520 ..................... B3373C (Fig. 6PVC)
400 ............................ B3100 (Fig. 1)
35 ........................... B3200 (Fig. 330) 107 ..................................... Fig. 22
400FL ....................... B3100F (Fig. 1F)
40 ........................... B3210 (Fig. 102) 108 ..................................... Fig. 23
402 ....................... B3104CT (Fig. 81)
40W ........................ B3211 (Fig. 101) 109 ..................................... Fig. 24
40 ........................... B3102 (Fig. 1CI)
43 ......................... DS15x2 (Fig. 125)
410 ..................................... B3104
46 ........................... B3214 (Fig. 106)
41 ............................ B3108 (Fig. 1A)
47 ........................... B3222 (Fig. 307)
418 ............................ B3690 (Fig. 3)
50 ....................... ATR (Fig. 99 & 100)
418FL ....................... B3690F (Fig. 3F)
Reference Data
51 ....................... ATR (Fig. 99 & 100)
450 ............................ B3140 (Fig. 4)
100 ............................ B3170 (Fig. 2)
451 .......................... B3142 (Fig. 4H)
125 ......................... B3151 (Fig. 220)
452 ............................ B3144 (Fig. 5)
130 ................................... Fig. 200
455 ....................... B3198H (Fig. 302)
150 ......................... B3188 (Fig. 110)
456 ................. B3198HCT (Fig. 301CT)
200 ........................... B351L (Fig. 64)
457 ......................... B3190 (FFig. 40)
255C ......................... B3367 (Fig. 69)
458 ........................... B3191 (Fig. 41)
282 ......................... B3014 (Fig. 309)
470 ........................... B3180 (Fig. 20)
282N ................... B3014N (Fig. 309N)
510 ............................ B3373 (Fig. 6)
300 ........................... B351L (Fig. 64)
511 ...................... B3373CT (FFig. 82)
310 ..................................... Fig. 66
516 ............. B3132W-1 &11/2 (FFig. 9X)
319 ........................... B3061 (Fig. 42)
517 ............................ B3132 (Fig. 9)
320L ................... B3083WO (Fig. 304)
605 ........................ B3114 (FFig. 322)
320W ....................... B3083 (Fig. 305)
610 ......................... B3110 (Fig. 324)
321 ......................... B3082 (Fig. 337)
615 ......................... B3120 (Fig. 325)
325 ........................... B3060 (Fig. 50)
617 ...................... B3117SL (Fig. 327)
326 ........................... B3070 (Fig. 52)
619 ...................... B3118SL (Fig. 328)
335A ................................. Fig. 975
620 ......................... B3122 (Fig. 326)
335AB ............................... Fig. 910
625 ......................... B3264 (Fig. 500)
340 ......................... B3248 (Fig. 118)
630 ......................... B3160 (Fig. 260)
348 ........................... B3068 (Fig. 30)
631 ......................... B3161 (Fig. 261)
351 ......................... B3065 (Fig. 30L)
632 ......................... B3162 (Fig. 262)
352 ........................ B3066 (Fig. 30M)
633 ......................... B3163 (Fig. 263)
353 ......................... B3067 (Fig. 30H)
634 ......................... B3164 (Fig. 264)
355 ......................... B2500 (Fig. 310)
635 ......................... B3165 (Fig. 265)
355N ..................... N2500 (Fig. 310N)
640 ......................... B3891 (Fig. 426)
356 ................................... Fig. 130
640-1 ................................... B3891
359 ........................... B3042 (Fig. 61)
10 ....................... ATR (Fig. 99 & 100) 490 ......................... B3114 (Fig. 322) 885 ........................ Fig 109A (B3019)
15 ........................... B3205 (Fig. 103) 508 ....................... B3198H (Fig. 302) 890 ................................... Fig. 975
20 ....................... ATR (Fig. 99 & 100) 512H ............... B3198HCT (Fig. 301CT) 900 ......................... B3083 (Fig. 305)
25 ........................... B3203 (Fig. 333) 520 ............................ B3140 (Fig. 4) 900-1 .................. B3083WO (Fig. 304)
32 ........................... B3222 (Fig. 307) 522 .......................... B3142 (Fig. 4H) 903 ........................... B3085 (Fig. 35)
35 ........................... B3200 (Fig. 330) 525 ............................ B3144 (Fig. 5) 904 ........................... B3086 (Fig. 34)
38 ........................... B3201 (Fig. 332) 535 ............................ B3148 (Fig. 7) 910 ........................... B3061 (Fig. 42)
40 ........................... B3213 (Fig. 105) 545 ............................ B3149 (Fig. 8) 925 ........................... B3070 (Fig. 52)
44 ........................... B3224 (Fig. 306) 550 ............................ B3373 (Fig. 6) 930 ......................... B3248 (Fig. 118)
47W ......................... AWA (Fig. 209) 552 ....................... B3373CT (Fig. 82) 936 ............................. B3080 L & S
48 ......................... DS15x2 (Fig. 125) 553 ..................... B3373C (Fig. 6PVC) (Fig. 343 LONG &
Fig. 343 SHORT)
50 ........................... B3210 (Fig. 102) 554 ................ B3373CTC (Fig. 82PVC)
940 ........................... B3199 (Fig. 78)
55 ........................... B3211 (Fig. 101) 580 ............................ B3132 (Fig. 9)
950 ......................... B3014 (Fig. 309)
60 ........................... B3212 (Fig. 104) 585 .............. B3132W-1 &11/2 (Fig. 9X)
950N ................... B3014N (Fig. 309N)
70 ......................... B2499 (Fig. 107F) 590 ........................... B3134 (Fig. 14)
960 ......................... B3202 (Fig. 331)
80 ..................................... Fig. 120 595 ...................... B3134W (Fig. 14X)
970 ............................ B3690 (Fig. 3)
90 ........................... B3188 (Fig. 110) 610, 620 ..................... B3050 (Fig. 62)
970F ........................ B3690F (Fig. 3F)
95, 110 ...................... B501 (Fig. 111) 630 ......................... B3054 (Fig. 329)
980 ........................... B3195 (Fig. 84)
Reference Data
100 ............................ B655 (Fig. 70) 635 ......................... B3040 (Fig. 336)
982 ....................... B3195CT (Fig. 83)
104 ......................... B655S (Fig. 70S) 651 ......................... B3160 (Fig. 260)
105 .......................... B656 (Fig. 70R) 653 ......................... B3161 (Fig. 261)
110 ............................. HN (Fig. 113) 654 ......................... B3162 (Fig. 262)
110H ......................... HHN (Fig. 114) 655 ......................... B3163 (Fig. 263)
130 ............................. FW (Fig. 115) 656 ......................... B3164 (Fig. 264)
134 ............................. LW (Fig. 117) 658 ......................... B3165 (Fig. 265)
135 ......................... B3234 (Fig. 116) 670-678 .......... B3281 - B3287 (Fig. 421)
136 ........................... FFW (Fig. 119) 690 ......................... B3891 (Fig. 426)
151 ............................ B3170 (Fig. 2) 690-1 ................................... B3891
160 ......................... B3153 (Fig. 219) 690-2 ................................... B3892
170 ......................... B3151 (Fig. 220) 690-3 ................. B3393-10/B3393-10B
250 ........................... B351L (Fig. 64) 810 ........................... B3191 (Fig. 41)
350 ..................................... Fig. 65 820 ........................... B3190 (Fig. 40)
359 ........................... B3367 (Fig. 69) 825 ........................... B3180 (Fig. 20)
360 ........................... B3367 (Fig. 69) 830 ...................... B3180FL (Fig. 20S)
420 ......................... B3102 (Fig. 1CI) 840 ....................... B3147A-1/2 thru 4
430 .......................... B3108 (Fig. 1A) (Fig. 32-1/2 thru 4)
440 ..................................... B3104 840 ........................ B3147B 4 thru 24
(Fig. 32-5 thru 34)
450 ............................ B3100 (Fig. 1)
850 ......................... B3065 (Fig. 30L)
450F ........................ B3100F (Fig. 1F)
855 ........................ B3066 (Fig. 30M)
450V ......................... B3106 (Fig. 1V)
860 ......................... B3067 (Fig. 30H)
453 ..................... B3100C (Fig. 1PVC)
871 ...................... B3088T (Fig. 316T)
460 ......................... B3120 (Fig. 325)
875 ....................... B3093 (Fig. 317A)
470 ......................... B3110 (Fig. 324)
876 ....................... B3092 (Fig. 318A)
480 ......................... B3122 (Fig. 326)
880 ......................... B3095 (Fig. 317)
486 ...................... B3117SL (Fig. 327)
882 ......................... B3090 (Fig. 318)
487 ...................... B3118SL (Fig. 328)
164 ........................... B3180 (Fig. 20) C790 ........................ B3151 (Fig. 220)
452 ......................... B2500 (Fig. 310) CF729A .................... B3120 (Fig. 325)
540 ........................... B3060 (Fig. 50) CI710 ....................... B3102 (Fig. 1CI)
542 ........................... B3070 (Fig. 52) CL710 .................................. B3104
AB102 ................... N2500 (Fig. 310N) CT720 .................... B3373CT (Fig. 82)
AB201 ................................. Fig. 51 CTL710 ................... B3104CT (Fig. 81)
C475 ...................... Fig 109A (B3019) CX710 ....................... B3108 (Fig. 1A)
C704 .......................... B3191(Fig. 41) E120 ........................ B3222 (Fig. 307)
C704A ....................... B3190 (Fig. 40) E120A ...................... B3200 (Fig. 330)
C710 .......................... B3100 (Fig. 1) E145 ........................... HN (Fig. 113)
C710F ...................... B3100F (Fig. 1F) E147 ........................... FW (Fig. 115)
C710P .................. B3100C (Fig. 1PVC) EF147 ........................ FFW (Fig. 119)
C720P .................. B3373C (Fig. 6PVC) E148 ........................... LW (Fig. 117)
C724 .......................... B3132 (Fig. 9) E151 ........................ B3213 (Fig. 105)
C725 .......................... B3140 (Fig. 4) E151D .................... DS15x2 (Fig. 125)
C726 .......................... B3144 (Fig. 5) E156 ........................ B3210 (Fig. 102)
C727 .......................... B3170 (Fig. 2) E157 ........................ B3211 (Fig. 101)
C729-2 ..................... B3110 (Fig. 324) F111 ........................ B3201 (Fig. 332)
Reference Data
C730C ................... B3117SL (Fig. 327) F112 ........................ B3202 (Fig. 331)
C730D ................... B3118SL (Fig. 328) H104 ................... ATR (Fig. 99 & 100)
C736 ......................... B3068 (Fig. 30) H115 ....................... B3188 (Fig. 110)
C739H ..................... B3067 (Fig. 30H) H119 .......................... B655 (Fig. 70)
C739M .................... B3066 (Fig. 30M) H119R ....................... B656 (Fig. 70R)
C747 ........................ B3082 (Fig. 337) HL115 ....................... B501 (Fig. 111)
C755T-C757T ............... B3050 (Fig. 62) M129 ....................... B3203 (Fig. 333)
C769 ........................ B3045 (Fig. 335) M718 ..................... B3198H (Fig. 302)
C775L ........................ B351L (Fig. 64) M724R ...................... B3199 (Fig. 78)
C777 ....................... Fig. 65/Fig. 65XT M732 ....................... B3054 (Fig. 329)
C778 ................................... Fig. 66 M778 ...................... B3034 (Fig. 68S)
C711 .......................... B3690 (Fig. 3) & B3033 (Fig. 68W)
C711F ...................... B3690F (Fig. 3F) PG794 ............. B3281 - B3287 (Fig. 21)
B3690C (FG 3PVC) RC729 ...................... B3122 (Fig. 326)
C716 ...................... B3195CT (Fig. 83) RCS ...................... B3147A-1/2 thru 4
C720 .......................... B3373 (Fig. 6) (Fig. 32-1/2 thru 4)
C720L ......................... B3148 (Fig. 7) RCS ....................... B3147B 4 thru 24
(Fig. 32-5 thru 34)
C780W/HW ............... B3083 (Fig. 305)
U568 ......................... B3367 (Fig. 69)
C780W/O ............. B3083WO (Fig. 304)
W724 ...................... B3132W-1 &11/2
C781 ........................ B3248 (Fig. 118)
(Fig. 9X)
C785 ........................ B3090 (Fig. 318)
C786 ...................... B3093 (Fig. 317A)
C789 ........................ B3160 (Fig. 260)
C789A ...................... B3160 (Fig. 260)
C789B ...................... B3162 (Fig. 262)
C789C ...................... B3163 (Fig. 263)
C789D ...................... B3164 (Fig. 264)
C789E ...................... B3165 (Fig. 265)
6 ............................. B3042 (Fig. 61) 258 .............. B3132W-1 &11/2 (Fig. 9X)
12 ........................... B3222 (Fig. 307) 260 ...................... B3134W (Fig. 14X)
14 ........................... B3040 (Fig. 336) 267 ............................ B3149 (Fig. 8)
15 ............................ B3050 (Fig. 62) 276 ......................... B3201 (Fig. 332)
18 ............................ B3367 (Fig. 69) 283 ......................... B3188 (Fig. 110)
28 ........................... B3213 (Fig. 105) 293 ......................... B3054 (Fig. 329)
31 ........................... B3212 (Fig. 104) 298 .......................... B3142 (Fig. 4H)
33 ........................... B3210 (Fig. 102) 303 ........................... B3060 (Fig. 50)
38 ........................... B3224 (Fig. 306) 304 ............................ B3144 (Fig. 5)
39 ........................... B3120 (Fig. 325) 306 ...................... B3210X (Fig. 102L)
44 ..................................... Fig. 120 341 ...................... B3211X (Fig. 101L)
53 ........................ B3118SL (Fig. 328) 351 ......................... B3160 (Fig. 260)
59 .................. Toggle Bolts (Fig. 123) 352 ......................... B3160 (Fig. 260)
69 ............................ B3068 (Fig. 30) 353 ......................... B3162 (Fig. 262)
84 ......................... B3066 (Fig. 30M) 354 ......................... B3163 (Fig. 263)
85 ............................ B3199 (Fig. 78) 355 ......................... B3164 (Fig. 264)
92 ........................... B3045 (Fig. 335) 356 ......................... B3165 (Fig. 265)
93 ........................... B3211 (Fig. 101) 478 ......................... B3264 (Fig. 500)
Reference Data
94 ....................... ATR (Fig. 99 & 100) 706 ......................... B3234 (Fig. 116)
100 ............................ B3100 (Fig. 1) 800 ............................ B3170 (Fig. 2)
102 ......................... B3248 (Fig. 118) 800 ................................... Fig. 200
103 ............................. FW (Fig. 115) 100C.I. ..................... B3102 (Fig. 1CI)
109 ......................... B3122 (Fig. 326) 100CT .................... B3104CT (Fig. 81)
114 ........................... B3180 (Fig. 20) 100EL ....................... B3108 (Fig. 1A)
123 ............................ B655 (Fig. 70) 100PVC ................ B3100C (Fig. 1PVC)
125 ......................... B3090 (Fig. 318) 100PVC ........... B3104CTC (Fig. 81PVC)
126 ............................ B3373 (Fig. 6) 123R ......................... B656 (Fig. 70R)
132 ......................... B3202 (Fig. 331) 123W ........................ B3220 (Fig. 71)
133 ......................... B3205 (Fig. 103) 126CT .................... B3373CT (Fig. 82)
137 ......................... B3096 (Fig. 312) 126PVC ................ B3373C (Fig. 6PVC)
139 ......................... B3067 (Fig. 30H) 158DB ....................... B3134 (Fig. 14)
140 ......................... B3110 (Fig. 324) 200VT ....................... B3106 (Fig. 1V)
152 ........................... B3061 (Fig. 42) 227S ......................... B3191 (Fig. 41)
158 ............................ B3132 (Fig. 9) 265P ........................ B3151 (Fig. 220)
165 ............................. HN (Fig. 113) 650-266-75 . . . . . . . . . B3014N (Fig. 309N)
166 ........................ DS15x2 (Fig. 125) 81CT . . . . . . . . . . . B3198HCT (Fig. 301CT)
175 ............................ B3140 (Fig. 4)
176 ............................. LW (Fig. 117)
179 ............................ B3148 (Fig. 7)
192 ..................................... Fig. 65
200 ..................................... B3104
220 .............................. B3080 L & S
(Fig. 343 LONG &
Fig. 343 SHORT)
222 ........................... B501 (Fig. 111)
227 ........................... B3190 (Fig. 40)
11 ............................. B3100 (Fig. 1) 110 ..................................... B3104 1902 ........................ B3162 (Fig. 262)
11CI ........................ B3102 (Fig. 1CI) 110CT .................... B3104CT (Fig. 81) 1903 ........................ B3163 (Fig. 263)
11V .......................... B3106 (Fig. 1V) 110PC .................. B3100C (Fig. 1PVC) 1904 ........................ B3164 (Fig. 264)
11X .......................... B3108 (Fig. 1A) 110PC ............. B3104CTC (Fig. 81PVC) 1905 ........................ B3165 (Fig. 265)
21L ........................... B351L (Fig. 64) 114 ......................... B3224 (Fig. 306) 4000 Series ............... B3891 (Fig. 426)
22R .......................... B3367 (Fig. 69) 131 ......................... B3200 (Fig. 330)
26 ........................... B3210 (Fig. 102) 137 ......................... B3188 (Fig. 110)
26W ........................ B3211 (Fig. 101) 145 ........................... B3191 (Fig. 41)
31 ............................. B3170 (Fig. 2) 146 ........................... B3190 (Fig. 40)
31 ..................................... Fig. 200 150 ................................... Fig. 130
35 ........................... B3262 (Fig. 506) 155 ......................... B3040 (Fig. 336)
41H ....................... B3198H (Fig. 302) 156 ......................... B3045 (Fig. 335)
41HCT ............. B3198HCT (Fig. 301CT) 157 ......................... B3203 (Fig. 333)
47 ........................... B3222 (Fig. 307) 158 ........................... B3042 (Fig. 61)
49PC ................... B3373C (Fig. 6PVC) 167 ......................... B3151 (Fig. 220)
50 ............................. B3373 (Fig. 6) 180 ...................... B3180FL (Fig. 20S)
50CT ..................... B3373CT (Fig. 82) 189 ............................ B3144 (Fig. 5)
50CTI or 49PC ................... B3373CTC 202 ........................... B3060 (Fig. 50)
(Fig. 82PVC)
Reference Data
212 ............................ B3140 (Fig. 4)
51 ............................. B655 (Fig. 70) 216 .......................... B3142 (Fig. 4H)
51R .......................... B656 (Fig. 70R) 218 ........................... B3050 (Fig. 62)
52 .............................. FW (Fig. 115) 229 ......................... B3054 (Fig. 329)
52F ........................... FFW (Fig. 119) 231 ........................... B3180 (Fig. 20)
52L ............................. LW (Fig. 117) 256 ............... B3281 - B3287 (Fig. 421)
53 ............................ B3061 (Fig. 42) 272 ......................... B3110 (Fig. 324)
54 ....................... ATR (Fig. 99 & 100) 273 ......................... B3122 (Fig. 326)
55 ........................... B3213 (Fig. 105) 275 ......................... B3120 (Fig. 325)
56 .............................. HN (Fig. 113) 277 ......................... B3114 (Fig. 322)
57 ........................... B3205 (Fig. 103) 320 ......................... B3202 (Fig. 331)
59 ......................... DS15x2 (Fig. 125) 420 ......................... B3095 (Fig. 317)
61 ...................................... Fig. 66 422 ......................... B3096 (Fig. 312)
62 .......................... Fig. 65/Fig. 65XT 426 ....................... B3093 (Fig. 317A)
67 ............................ B3086 (Fig. 34) 427 ....................... B3092 (Fig. 318A)
68 ............................ B3085 (Fig. 35) 427 ......................... B3090 (Fig. 318)
69 ............................... B3080 L & S 595 ........................... B3134 (Fig. 14)
(Fig. 343 LONG &
599 .............. B3132W-1 &11/2 (Fig. 9X)
Fig. 343 SHORT)
600 ............................ B3132 (Fig. 9)
72 ........................... B3234 (Fig. 116)
801 ........................ B3066 (Fig. 30M)
75 ........................ B3134W (Fig. 14X)
802 ......................... B3067 (Fig. 30H)
75 ........................... B3248 (Fig. 118)
820 ........................... B3068 (Fig. 30)
77 ......................... B2499 (Fig. 107F)
909 ......................... B3201 (Fig. 332)
80 ............................ AWA (Fig. 209)
279S .................... B3117SL (Fig. 327)
81N .................... B3014N (Fig. 309N)
280S .................... B3118SL (Fig. 328)
83 .................. Toggle Bolts (Fig. 123)
425 or 427 ................. B3098 (Fig. 313)
95 ............................. B3148 (Fig. 7)
1900 ........................ B3160 (Fig. 260)
97 ............................. B3149 (Fig. 8)
1901 ........................ B3160 (Fig. 260)
Index
B3126 ....................................................................... 114 B3201L .................................................................... 235 B3365 .......................................................................... 29
B3132 .......................................................................... 74 B3201LWO ........................................................... 237 B3373 .......................................................................... 72
B3132W .................................................................... 74 B3201WO .............................................................. 237 B3373C ...................................................................... 72
B3134 .......................................................................... 75 B3202 ....................................................................... 237 B3373CT ................................................................... 73
B3134W .................................................................... 75 B3203 ....................................................................... 236 B3373CTC ................................................................ 73
B3140 .................................................................. 77-78 B3205 ....................................................................... 238 B3373F ....................................................................... 72
B3140C ............................................................... 77-78 B3205L .................................................................... 238 B3380 ....................................................................... 126
B3140F ............................................................... 77-78 B3210 ....................................................................... 241 B3381 ....................................................................... 126
B3141 .......................................................................... 79 B3210L .................................................................... 241 B3382 ....................................................................... 126
B3142 .......................................................................... 80 B3210X .................................................................... 242 B3383 ....................................................................... 126
B3144 .................................................................. 81-82 B3210XL ................................................................. 242 B3384 ....................................................................... 126
B3146 .......................................................................... 83 B3211 ....................................................................... 241 B3386 ....................................................................... 126
B3147A ......................................................... 145-146 B3211L .................................................................... 241 B3387 ....................................................................... 126
B3147B ......................................................... 145-146 B3211X .................................................................... 242 B3690 .......................................................................... 54
B3148 .......................................................................... 85 B3211XL ................................................................. 242 B3690C ...................................................................... 54
B3149 .......................................................................... 86 B3212 ....................................................................... 243 B3690F ....................................................................... 54
B3151 ....................................................................... 164 B3213 ....................................................................... 240 B3891 ............................................................. 149-150
B3153 ....................................................................... 164 B3214 ....................................................................... 240 B3892 ............................................................. 149-150
B3154 ....................................................................... 165 B3220 ....................................................................... 245 B3893 ............................................................. 149-150
B3155 ....................................................................... 165 B3222 ....................................................................... 230 B3894 ............................................................. 149-150
B3160 ............................................................. 157-162 B3223-3/8 .............................................................. 236 B3895 ............................................................. 149-150
B3896 ............................................................. 149-150 BPH650 .................................................................. 166 CH30SCS-E Series ........................................ 272
B3897 ............................................................. 149-150 BPH850 .................................................................. 166 CH30SCS-ET Series ..................................... 272
B3991 ............................................................. 153-156 BPH3100-2 ................................................ 167-168 CH30SCS-F Series ........................................ 273
B3993 ............................................................. 153-156 BPH3100-3 ................................................ 167-168 CH30SCS-FT Series ..................................... 273
B3993B ......................................................... 153-156 BPH3100-4 ................................................ 167-168 CLDP10 ................................................................... 289
BD40 ......................................................................... 206 BPH3100-5 ................................................ 167-168 CNNK ....................................................................... 256
BE5-8 ....................................................................... 206 BPH3100-6 ................................................ 167-168 CNP ........................................................................... 255
BE9-12 ..................................................................... 206 BPH3100-8 ................................................ 167-168 DB__DS Series ..................................... 285-286
BH-2-4 ....................................................................... 70 BPH3100-10 .............................................. 167-168 DB5 ............................................................................ 281
BH-2-4-R .................................................................. 70 BPH3100-12 .............................................. 167-168 DB10 ......................................................................... 281
BH-5-8 ....................................................................... 70 BPHUCLG ................................................... 167-168 DB10-Length Series .................................... 283
BH-5-8-R .................................................................. 70 BPHUCSG .................................................. 167-168 DB20 ......................................................................... 281
BH-9-12 ..................................................................... 70 BPIC Series ........................................................ 106 DB30 ......................................................................... 281
BH-9-12-R ............................................................... 70 BPRC Series ...................................................... 105 DB40 ......................................................................... 281
BKA Series ......................................................... 302 BPS225 ........................................................ 169-170 DB48 ......................................................................... 281
BKB Series ......................................................... 301 BPS325 ........................................................ 169-170 DB610 ...................................................................... 282
BKC100 ................................................................... 294 BPS425 ........................................................ 169-170 DB620 ...................................................................... 282
BKC200 ................................................................... 294 BPS525 ........................................................ 169-170 DB630 ...................................................................... 282
BKCC ........................................................................ 295 BPS625 ........................................................ 169-170 DB640 ...................................................................... 282
BKF100-4 ............................................................... 296 BPS862 ........................................................ 169-170 DB648 ...................................................................... 282
BKF100-6 ............................................................... 296 BPSC Series ...................................................... 106 DBE10 Series .................................................... 288
BKH Series ......................................................... 299 BPSCB .................................................................... 170 DBM ......................................................................... 280
BKL Series .......................................................... 298 BPSCW .................................................................. 170 DBM__ Series ................................................. 284
BKP10063 ............................................................. 295 BPU250G .................................................... 167-168 DBM__CT Series .......................................... 284
BKP10094 ............................................................. 295 BPU350G .................................................... 167-168 DBP ........................................................................... 280
BKP20125 ............................................................. 295 BPU450G .................................................... 167-168 DBR__ Series ................................................... 287
BKP20188 ............................................................. 295 BPU550G .................................................... 167-168 DBR10-12 .............................................................. 288
Index
Index
NNP .......................................................................... 254
OSA-__E Series .............................................. 260
OSA-__F Series .............................................. 260
OSB-__E Series .............................................. 260
OSB-__ET Series .......................................... 260
OSB-__F Series .............................................. 260
OSB-__FT Series ........................................... 260
OSB-__-3YW162 ............................................ 261
OSB-__-3YW325 ............................................ 261
OSB-__-3YW496 ............................................ 261
OSB-__-G213 .................................................... 261
OSB-__-G303 .................................................... 261
OSE-__E Series .............................................. 260
OSE-__F Series ............................................... 260
OSF-__F Series ............................................... 260
OSF-__-3YW1036 ........................................... 261
OSF-__-G853 ..................................................... 261
OSF-__-G1223 ................................................... 261
RH-__-A Series ............................................... 269
RH-__-B Series ............................................... 269
RH-__-C Series ............................................... 269
Eaton
5925 McLaughlin Road
Mississauga, ON L5R 1B8
Canada
Phone: (800) 569-3660
www.cooperbline.com/contactca
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
B-Line Division
509 West Monroe Street
Highland, IL 62249
Phone: 800-851-7415
Fax: 618-654-1917
www.cooperbline.com
© 2016 Eaton
All Rights Reserved Eaton is a registered trademark
Printed in USA
Publication No. CA310001EN All other trademarks are property
December 2016 15M (PH-16) of their respective owners.