Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 88 views

    9PD0049

    Uploaded by

    Chandra Nuriko
    1) SEW-Eurodrive brakes can be controlled with a 24 VDC voltage source and are suitable for automation systems and applications requiring safety. 2) For smaller motors, the 24 VDC can be directly connected to the brake coil to release the brake. Larger motors require a brake control module. 3) To release the brake, 24 VDC is applied to the control module. Removing 24 VDC sets the brake to stop motor rotation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    9PD0049

    Uploaded by

    Chandra Nuriko
    88 views2 pages
    1) SEW-Eurodrive brakes can be controlled with a 24 VDC voltage source and are suitable for automation systems and applications requiring safety. 2) For smaller motors, the 24 VDC can be directly connected to the brake coil to release the brake. Larger motors require a brake control module. 3) To release the brake, 24 VDC is applied to the control module. Removing 24 VDC sets the brake to stop motor rotation.

    Original Description:

    Data Sheet 1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) SEW-Eurodrive brakes can be controlled with a 24 VDC voltage source and are suitable for automation systems and applications requiring safety. 2) For smaller motors, the 24 VDC can be directly connected to the brake coil to release the brake. Larger motors require a brake control module. 3) To release the brake, 24 VDC is applied to the control module. Removing 24 VDC sets the brake to stop motor rotation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    88 views2 pages

    9PD0049

    Uploaded by

    Chandra Nuriko
    1) SEW-Eurodrive brakes can be controlled with a 24 VDC voltage source and are suitable for automation systems and applications requiring safety. 2) For smaller motors, the 24 VDC can be directly connected to the brake coil to release the brake. Larger motors require a brake control module. 3) To release the brake, 24 VDC is applied to the control module. Removing 24 VDC sets the brake to stop motor rotation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Type BM Brakes OPERATING INSTRUCTIONS

    with 24 VDC Control 09 757 12 US

    GENERAL BRAKE CONNECTION


    SEW-Eurodrive brakes are available for use with a 24 VDC The general wiring diagrams for the brake type BM controlled
    source voltage. A 24 VDC brake system lends itself well to use by a 24 VDC signal are given on the back side of this sheet. On
    in process automation systems where other components are motor frame sizes DT71-DT100 the brake can be released by
    controlled by 24 VDC signals. Safety reasons may also dictate applying 24 VDC directly across the brake coil (the red and
    the use of a 24 VDC brake system. See the motor nameplate blue wires). The brake is set by removing the 24 VDC from the
    for the required brake voltage. brake coil. As standard the brake coil wires are connected to a
    terminal strip in the motor’s conduit box. It is recommended
    These operating instructions should be used together with the that a varistor be put in parallel across the brake coil to protect
    general operating instructions “Motors and Brakemotors Type BM the brake coil and the contacts from overvoltage caused by
    Brakes.” This sheet replaces the section “BRAKE CONNECTION switching the brake on or off. Suitable varistors for this
    (AC VOLTAGE)” and “BRAKE VOLTAGE SUPPLIED FROM THE protection are:
    MOTOR” in the general operating instructions.

    BRAKE FUNCTION Manufacturer Varistor Type


    SEW-Eurodrive fail-safe mechanical brakes are DC voltage Siemens SIO V-S10 K300
    controlled. To release the brake and allow the motor to rotate, GE V275LA10
    24 VDC is applied to the brake system. To set the brake and Panasonic ERZ-C10DK471
    hold the motor, 24 VDC is removed from the brake system. In
    the small frame size motors (DT71-DT100) the brake coil can
    be connected directly to the 24 VDC supply. In the larger frame The BSG brake control module is supplied as standard
    size motors (DV112-DV225) a brake control module (type equipment on motor frame sizes DV112-DV225 and optionally
    BSG) is required to operate the brake. The brake control on motor frame sizes DT71-DT100. The BS24 is supplied as a
    module BSG can optionally be used with the smaller frame standard on sizes DT71-DT100. To release the brake 24 VDC
    motors (DT71-DT100) and it will improve the brake’s is applied to terminals 2 and 3 on the BSG control module. To
    performance. The BSG control module with motors sizes set the brake the 24 VDC power is removed from the brake
    (DT71-DT100) will provide faster brake release times allowing control module. The BSG unit incorporates overvoltage
    the motor to cycle more frequently. protection so no external varistor is required.
    A common sequence of operation is to apply 24VDC to
    release the brake at the same time as power is applied to start
    the motor. Typically power is removed from the brake and
    motor simultaneously to stop the motor.

    Brake Current Draw


    Brake Type BM05 BM1 BM2 BM4 BM8 BM15 BM30 - BM62
    Motor Type (DT/DV) 71 - 80 80 90 - 100 100 112 - 132S 132M - 160M 160L - 225M
    Continuous Current (Amps DC) 1.38 1.54 1.77 2.20 2.45 4.15 4.00
    Inrush Current (Amps DC) 5.52* 6.16* 7.08* 8.80* 15.4 31.1 34.0
    *The inrush current occurs only if the BSG brake control module is used.

    SOUTHEAST MANUFACTURING MIDWEST ASSEMBLY CENTER WEST COAST ASSEMBLY CENTER


    & ASSEMBLY CENTER 2001 West Main Street/Troy OH 45373 30599 San Antonio Road/Hayward CA 94544
    1295 Old Spartanburg Highway/Lyman SC 29365 (937) 335-0036 Fax: (937) 440-3799 (510) 487-3560 Fax: (510) 487-6381
    (864) 439-7537 Fax: (864) 439-7830

    SOUTHWEST ASSEMBLY CENTER EAST COAST ASSEMBLY CENTER


    3950 Platinum Way/Dallas TX 75237 200 High Hill Road/Bridgeport NJ 08014
    (214) 330-4824 Fax: (214) 330-4724 (856) 467-2277 Fax: (856) 845-3179

    Printed in U.S.A. 12/05


    Brake
    Coil

    blue
    white
    red
    Auxiliary Terminal Strip

    1a 2a 3a 4a 5a

    24VDC

    Brake Control Module


    Type BS/BSG

    1 2 3 4 5
    red

    white

    blue

    Brake
    Coil

    24VDC

    1) The contacts shown are not SEW-Eurodrive Supplied


    2) The recommended varistor is not SEW-Eurodrive supplied.

    Printed in U.S.A. 2 12/05

    You might also like