hydrolub

Grey cast iron gear pump for industrial processes

Continuously operated equipment calls for Your benefits

reliable components. Whether in lubrication
¡ Wide viscosity, temperature, and pressure range
oil applications or in processing plants, a
pump is required to work inconspicuously yet ¡ High efficiencies (due to tolerances and small clearances being
modified in line with applications)
reliably. Precisely the environment in which
Maag tried and established gear pumps de- ¡ Precise displacement volume
velop their full potential. Thanks to the exten- ¡ Self-priming
sive range of components and materials of ¡ Reliability and longevity
construction to choose from, Maag gear
¡ Safety
pumps can be configured to suit customers'
specific requirements and are therefore far su-
¡ Low pulsations for oil applications (helical gears)

perior to standard pumps in terms of perfor-

mance and reliability.
hydrolub
Grey cast iron gear pump for industrial processes

Technical specifications:
A range of typical pumping media
Housing: ¡ Pressure-resistant cast iron
¡ Silicones
Gear shafts: ¡ Nitrided steel (spur, helical or coated)
¡ Paints and varnishes
Bearing3): ¡ Steel/bronze, Sintered iron, Synthetic carbon
¡ Waxes and paraffins
¡ Mineral oils and fats ¡ Steel with carbon inserts
¡ Nitrided steel and Nitrided steel coated
¡ Fuels
¡ Hardened tool steel
¡ Petrochemical products
¡ Bronze - CuAl
¡ Lube oil
Shaft seal: ¡ Lip seals and packing
¡ Single or double mechanical seal
Certificates1)
¡ External mechanical seal
¡ ATEX certificates
¡ Interlock or heater connections available
¡ 3.1 certificate
¡ Magnetic coupling with single or double containment
¡ German Air Quality certificate (TA-Luft) shell
¡ Performance test certificates Connections: ¡ SAE, CETOP, DIN, and ANSI flanges

Application limits: Theoretical pumping capacities in l/min at 0 bar Δp:

Viscosity: 0.3 to 4,000,000 mPas at 500 at 750 at 1,000 at 1,500 at 3,000
Size
Temperature: -30 to 150 °C rpm rpm rpm rpm rpm

Suction pressure: Vacuum to 65 bar 22/6 0,64 0,96 1,28 1,92 3,84

Discharge pressure: Vacuum to 120 bar 22/13 1,39 2,09 2,78 4,17 8,34
22/22 2,35 3,53 4,70 7,05 14,10
Flow rate2): 0.1 to 1,750 l/min
22/28 2,99 4,49 5,98 8,97 17,90
28/28 5,10 7,65 10,20 15,30 30,60
Options 28/36 6,55 9,83 13,10 19,70 39,30
¡ Heated seals 36/28 9,95 14,90 19,90 29,90 59,70
¡ Bi-directional rotation 36/36 12,80 19,20 25,60 38,40 76,80
¡ Special modifications for demanding 36/45 16,00 24,00 32,00 48,00 96,00
applications
45/45 23,15 34,73 46,30 69,45 139,00
45/56 28,90 43,30 57,70 86,60 173,00
Accessories
56/56 46,30 69,45 92,60 138,90 –
¡ Stands, motor flanges and base plates
56/70 58,00 87,00 116,00 174,00 –
¡ Product connecting flanges
70/70 88,00 132,00 176,00 264,00 –
¡ Couplings
70/90 114,00 170,00 227,00 341,00 –
¡ Motors and gear reducers
90/90 186,00 278,00 371,00 557,00 –
¡ Frequency converters
90/110 227,00 340,00 453,00 680,00 –
¡ Shaft seal systems
110/90 293,00 439,00 585,00 – –
110/110 358,00 537,00 716,00 – –
110/140 456,00 683,00 911,00 – –
140/110 527,00 791,00 1.054,00 – –
140/140 671,00 1.007,00 1.342,00 – –
140/180 863,00 1.294,00 1.725,00 – –
140/220 1.054,00 1.581,00 2.108,00 – –

The limitation of use depends on the operating conditions. Please contact Maag for specific applications.
1)
Other certificates and conformities upon request. 2)
Higher flow rates upon request. 3)
Other materials and designs available.
PF_10_EN_2017/04

Global contacts, see www.maag.com

Contact us at contact@maag.com
The data and illustrations refer to the date of printing. Necessary changes can be made at any time without special notice. Maag´s products and processes are protected by IP rights.