Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
80 views

AC6-How To Setup Client+AP Mode

This document provides steps to set up a Tenda AC6 router in Client+AP mode. It describes configuring the PC network settings, enabling Client+AP mode in the router settings, and checking internet connectivity after rebooting the router.

Uploaded by

dionisiusdiucez
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
80 views

AC6-How To Setup Client+AP Mode

This document provides steps to set up a Tenda AC6 router in Client+AP mode. It describes configuring the PC network settings, enabling Client+AP mode in the router settings, and checking internet connectivity after rebooting the router.

Uploaded by

dionisiusdiucez
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 11

How to setup Client+AP mode for AC6

This article will guide you how to setup WISP and the steps as
below.
Model Number：Tenda AC6 Question Classification：Internet Setting
Part 1: Configure an IP address for PC
Part 2: Configure Client+AP mode
Part 3: Check whether your computer can get internet

1. Click on “Network Connection Icon” on the system bar, then click on


“Open Network and Sharing Center”.

2. Click on “Change adapter settings”.

3. Right click on “Local Area Connection”, then choose the


“Properties” option.

4. Double click on “Internet Protocol Version 4(TCP/IPv4)”.


5. Choose Obtain an IP address automatically and Obtain DNS server
address automatically and then click OK.
6 Also click on OK on the first Local Area Connection Properties window.
Notice：If you use the router for the first time, it will appear easy to use
interface in the process of you set WISP, you need to skip these interface,
login to the Advanced Settings interface to set WISP.
1. Open a browser ,then type http://tendawifi.com in the address bar, press
Enter. And login to the router interface, as follows：
2. Click the "Skip" in the page refer to the below screen shot:

3. Set the region or country, change router’s SSID and wireless password,
set a login password, and the login password should be 5~32 characters.
Click “Next”. Refer to the following setup steps:

4. “Setup completely, router is connecting the internet, please wait.”


Wait about 10 seconds, it will come out an interface.
5. Typing the login password you set before. Click “Login” and turn to the
setup page, reference is as bellow.
6. Entering the router's Settings interface，click ” Wireless Settings ”，click
” Wireless Repeating ” as follows：
7. Enable “Wireless Repeating” ， choose mode as “Universal
Repeater” ， select “Base Station WiFi Name”, type password in “Base
Station WiFi Password” , click “Save” to save all the settings. Refer to
the following setup steps:

8. After click “Save”, please wait for router to reboot:


Notice ： To make it easier to manage, please set the LAN ip at the same
segment with gateway. For example, the gateway’s LAN ip is 192.168.2.1,
you should set the local device’s access ip as 192.168.2.x, x can be 2~254.

After reboot, connect router’s LAN1/LAN2/LAN3 ports, or reconnect wireless


signal of the router, try if you can surf the internet. Login the setting
interface of the router, can check the internet status, if the internet settings
shows “Connected!”, means setting successfully. You can check whether
you can get connected.

You might also like