TST JawCrusher
TST JawCrusher
TST JawCrusher
Jaw crushers
Design
The active feed opening of the jaw crusher chamber ensures that any occasional oversize material will be gripped
and quickly pulled into the crusher. Once the jaw plates pull in the material, its steep nip angle ensures continual grip
and efficient crushing of even the hardest material.
4
Features
1. Abrasion resistant cheek plates are easier to 4. Rolling toggle design and replaceable abrasion 7. Spherical roller bearings use a multi-pass
replace resitant toggle seats provide long life labyrinth and grease to minimize dust and dirt
2. FLSmidth’s bolted and pinned frame assembly 5. Hydraulic cylinder wedge adjustment takes up ingress.
comes together for a very strong and robust wear seen on the jaw plates
design 6. Safety shear pin provides faster and safer
3. Swing jaw & front frame employ replaceable maintenance than a typical breakable toggle
jaw plate holders in the event of wear. plate
6
Dimensions
Opening 850 x 1100 920 x 1200 1160 x 1400 1280 x 1550 1600 x 1900
mm / (in) (33 x 43) (36 x 47) (46 x 55) (50 x 61) (63 x 75)
150kw 185kw 225kw 265kw 375kw
Motor power
[200hp] [250hp] [300hp] [350hp] [500hp]
Capacities
Capacity
css
mtph / (stph)
75mm 180 - - - -
(3.0in) (198)
Copyright © 2013 FLSmidth A/S. ALL RIGHTS RESERVED. FLSmidth is a (registered) trademark of FLSmidth A/S. This brochure makes no offers, representations or
warranties (express or implied), and information and data contained in this brochure are for general reference only and may change at any time. www.flsmidth.com
Mineral Processing
Technology Center
FLSmidth Salt Lake City, Inc.
7158 S. FLSmidth Dr.
Midvale, UT 84047-5559
USA
Tel: +1 801 871 7000
Fax: +1 801 871 7001
E-mail: info.slc@flsmidth.com