OPERATING RANGE

Flow rates up to: 500 m3/h S

Mano. head up to: 60 m CE
Operating pressure:
Temperature range:
6 bar
- 40° to +140°C*
SELF-PRIMING
Connection: 1”1/2 to 4”
DN40 to DN200
CENTRIFUGAL PUMPS
Flange PN: PN10/16
Max. solids: ≃ DN÷ 2
* According to model

60 APPLICATIONS
Pumping of clear or muddy, neutral or corro- Application examples:
sive fluids in the sectors of industry, muddy • Removal of muddy water
water pumping, site dewatering... • Pumping seawater
Hm S 40 à S 230 Tractable diesel version for rapid interven- • Recirculation of industrial waste
tion in case of flooding. • Waste water pumping
• Black water pumping

Qm3/h 500

ADVANTAGES

• Self-priming capacity (up to 6m depen-

ding on model and system condition)
• S version on frame
avoiding the use of a foot valve and the
risk of unpriming.

• High level of abrasion resistance and

use of wear plates which are easy to
replace.

• Passage of large solid bodies of approxi-

mately half the DN of the pump.

• External lubrication of the mechanical

seal to extend its lifespan.

• Numerous material combinations cor-

responding to a maximum number of
applications.

• 
Versions e quipped with a pe -
• monobloc stainless steel S version
trol or die se l the rmal motor
(contact us).

N.T. No 177-1/ENG. - Ed.5/10-14 1

 S

CODIFICATION
S 40 F A R - 21 - T 11 / 2 K - 3B
1 2 3 4 5 6 7 8 9 10

1: Pump size (see curves) 6: Motor supply

code alimentation
2: Pump metal T Three phase
Code Pump body Impeller Shaft/ housing Wear plates M Single phase
Cast iron or D Diesel
F Cast iron Cast iron Stainless steel
Treated steel E Petrol
E Cast iron S.steel 316 Stainless steel Stainless steel N Unit without motor
Cast iron + Zinc
Z Bronze or S.steel Stainless steel Bronze or S.steel
anode
7: Motor power (in kW)
Cast iron + Cast iron or
C* Cast iron + CERAM® Stainless steel
CERAM® Treated steel
B Bronze Bronze Stainless steel Bronze
8: Number of poles (for electric motors) /
X S.steel 316 S.steel 316 S.steel 316 Stainless steel Number of cylinders (for thermal motors)

* C: available for S80 and above

9: Motor option (empty = no option)
3: Impervious material
Available sizes Mechanical seals Gaskets Valves • Options for electric motor:
A All SiC/Ceram/FPM NBR NBR
code option motor
B All SiC/Ceram/FPM FPM FPM
K PTC probe
S40 to 42 WC/SiC/PTFE PTFE PTFE
S ON/OFF switch
WC/SiC/PTFE PTFE PTFE or without
C S45 to 161 PTFE
(with bellows) (depending on size) • Options for thermal motor:
S170 to S230 WC/SiC/PTFE PTFE sans
code Brand Start-up Tank
F All Carbon/SiC/FPM NBR NBR
G All Carbon/SiC/FPM FPM FPM A Lombardini Manual on motor

PTFE PTFE or without B Lombardini Electric on motor

H S45 to 161 Carbon/SiC/PTFE PTFE C Lombardini Electric in frame
(depending on size)
J All Carbon/SiC/EPDM EPDM EPDM E HATZ Manual on motor
K All WC/WC/NBR NBR NBR F HATZ Electric on motor
G HATZ Electric in frame
H HATZ - Silent Electric in frame
4: Hydraulic configuration N DEUTZ Electric in frame
Code Openings Greaser Option
R Threaded With / 10: ATEX brand
S Flanged With / code Corresponding ATEX brand
T* Threaded Without  / A ZONE 1 - CAT.2 - II 2Gc
By consultation

U* Flanged Without  / B ZONE 1 - CAT.2 - II 2Gc - Ex d IIB T4

C Threaded With With knife system 2 C ZONE 1 - CAT.2 - II 2Gc - Ex d IIC T4
D Flanged With With knife system D ZONE 1 - CAT.2 - II 2Gc - Ex de IIB T4
F Threaded Without With flushing E ZONE 1 - CAT.2 - II 2Gc - Ex de IIC T4
G Flanged Without With flushing A ZONE 2 - CAT.3 - II 3Gc

* for imperviousness J only B ZONE 2 - CAT.3 - II 3Gc - Ex d IIB T4

3 C ZONE 2 - CAT.3 - II 3Gc - Ex d IIC T4

5: Pump motor assembly D ZONE 2 - CAT.3 - II 3Gc - Ex de IIB T4

E ZONE 2 - CAT.3 - II 3Gc - Ex de IIC T4
11 standard
12 on portable frame
Monobloc
13 on trolley
14 on tractable trailer
21 standard
22 on portable frame
Bibloc
23 on trolley
24 on tractable trailer
31 on frame
32 Bearing on frame + spacer
35 bare shaft end pump

2
 S

SELECTION ASSISTANCE
The following tables can help to select a pump construction adapted S 40 F A R - 21 - T 11 / 2 K
to your requirements.
Alternative constructions may be available upon request. Hydraulic option
Codes Openings
S 40 F A R - 21 - T 11 / 2 K R Threaded
S Flanged PN16
Pump size: to be selected on the basis of performance curves

S 40 F A R - 21 - T 11 / 2 K S 40 F A R - 21 - T 11 / 2 K
Hydraulic section materials Assembly type pump / motor
Code Application examples Body* G.M.* Gaskets
Code Assembly Advantage
F A Muddy water (sand,...) Cast iron SiC/Ceram/FPM NBR
11 Monobloc Compact construction
F B Waste water, oil, petrol, diesel, Cast iron SiC/Ceram/FPM FPM
hydrocarbons 21 Bibloc Sturdy construction for intensive use
Cast iron & Zinc 31 On frame Construction for high power
Z A Seawater, salty water SiC/Ceram/FPM NBR
anode
B A Seawater, brine Bronze SiC/Ceram/FPM NBR
S 40 F A R - 21 - T 11 / 2 K
X B Demineralised water, diluted acid, Stainless steel SiC/Ceram/FPM FPM
industrial waste (Viton compatible)
Motor power: to be selected on the basis of performance curves.
X C Acids, industrial fluids (PTFE Stainless steel WC/SiC/PTFE PTFE
compatible)
X H Acids, solvents, industrial fluids (PTFE
compatible) Stainless steel Carbon/SiC/PTFE PTFE

* exact materials in codification section

DESIGN CREATION OF THE HYDRAULIC SECTION

• Hydraulic section ⓫
- Self-priming centrifugal pump with single- ❿
cell surface.
- Horizontal suction, vertical discharge. ❾
- Standard flanged connection or threaded
openings. ❽

• Imperviousness ❶
- Simple mechanical seal, optional flushing.
- Automatic distribution lubrication cartridge.
- Sleeved shaft (according to version).
❷
• Motor section
❼
- Standard IEC ventilated motor form B3, B5
or specific long shaft.
❸
Electric motor features:
Output IE2 ❹
Network voltage: 1~220V (up to 1,1kW) ❺ ❻
3~ 230/400V (up to 4kW)
❶ Suction support with integrated non-return valve ❼ Permanently lubricated bearings
3~ 400/690V (from 5,5kW)
❷ Firing chamber ❽ Shaft
Frequency: 50 ou 60Hz (according to ❸ Inspection panel ❾ Mechanical seal
version) ❹ Drain plug or panel (according to model) ❿ Air separation chamber
Number of poles: 2 – 4 – 6 (according to ❺ Wear pads ⓫ Delivery port
❻ Wide-spaced open impeller
version)
Insulation category : (F) SELF-PRIMING PRINCIPLE
Protection index: IP55
Probes: PTC (except monobloc) The pump body is specific and comprises two Once the suction line is completely filled with
internal chambers. The impeller ❻ trotates in the liquid, the pump behaves in the same way as a
- Thermal motors available by consultation firing chamber ❷, which always remains filled standard centrifugal pump. The upper position
(assembled on frame or tractable trolley). with liquid. This creates the depression required of the suction support and the action of the non-
for the suction of air contained in the suction line. return valve ❶ allow for liquid to be maintained in
lA mixture of air and liquid is created and transfer- the pump at all times. Even after long stoppage
red to the separation chamber ❿ where the air is periods, the pump may start a new firing cycle
separated from the liquid which falls into the firing without needing to be refilled.
chamber due to the force of gravity ❷.

3
 S

SUCTION SUPPORTS AND DELIVERY PORTS

2 options are available

Flanged openings PN16
Threaded openings

Dimensions of openings (identical at suction and discharge points):

Pump size 40-41-42-45-46 50-51-60-61-63-65-66-68-69 80-82-83-85-88-91 100-105-108-121 150-161-170-180 201-220-230
Threaded opening G 1 ½" G 2" G 3" G 4" - -
Flanged opening DN40 PN16 DN50 PN16 DN80 PN16 DN100 PN16 DN150 PN16 DN200 PN16

CERAM ®COATING KNIFE SYSTEM OPTION

Patented CERAM ® coating with a high cera- This option prevents the obstruction of the Axial version
mic content is available on S pumps from size impeller when fibrous matter is present in the
80. pumped liquid.

Advantages: Example of use:

• Pump protected in the long term against • Animal manure with straw
attacks from chemically aggressive fluids. • Liquids with fruit and vegetable residue
• Abrasion resistance superior to that of cast • Liquids containing paper or flexible plastic
iron. materials
• Adherence three times greater than that of • Sewage
traditional epoxy coatings. This option is available for the following
Radial version
• The strong cohesion of the coating prevents models:
the propagation of rust due to blistering. 40, 41, 42, 46, 50, 51, 61, 80, 85, 88, 105, 150
• 
Reloading possible during maintenance Axial or radial version depending on sizes.
operations.
Attention: this option is not suitable if the
liquid contains hard solids (wood,
metallic items, stones, resistant fabrics,...)

4
 S

MECHANICAL SEAL PUMP/MOTOR ASSEMBLY

• Automatic greasing cartridge Transportable (S40 & 41 only)
• Long shafted motor integrated in the pump
Provides lubrication for the mechanical seal Transportable monobloc
(without coupling),
(code 12)
and reduces heating during the firing phases. • Single-phase motor with switch,
• Pumps on transportable frame.
Operation: once the cartridge has been
activated, an electronic system regulates
a constant flow of grease for the selected Reduced space requirement
duration. Monobloc • Long shafted motor integrated in the pump
(code 11) (without coupling),
EPDM is not compatible with the cartridge • Three-phase motor IE2.
grease. Therefore, this option cannot be
selected with imperviousness J (EPDM). Pump-motor alignment by construction
Item No for spare part: 4089173 • Ball bearing,
Bibloc • Permanently greased ball bearings,
(code 21) • Semi-elastic coupling,
• Standard IEC motor with flange B5 (IE2),
• PTC probes.

Traditional construction on frame

• Ball bearing,
• Permanently greased ball bearings,
On frame
• Semi-elastic coupling,
(code 31)
• Coupling protector,
• Standard IEC motor with feet B3 (IE2),,
• PTC probes.

Autonomous mobile unit

• On tractable trailer or trolley,
On trolley or trailer (codes
• Thermal (or electric) motor,
13,14,23,24)
• Monobloc or bibloc assembly,
• Numerous motor options.

ASSEMBLY WITH THERMAL MOTOR

• Performance curves
Mobile version on trolley
When the pump is coupled with a thermal - Manual starter
• External lubrication (flushing) motor, its hydraulics are adapted to the rota- - Motor tank

Lubrication is provided by the circulation of an tion speed of the motor. The operating curves
external fluid. This construction allows for the are traced for different rotation speeds (upon
permanent washing of the mechanical seal request).
when pumping blocking, crystallising fluids... • Starter
The flushing is not available with all models Two options are available: Fixed system
(contact us). - Electric starter
- Manual launcher - Motor tank
- Electric starter: the motor-pump unit is fitted
in this case with a battery.
• Tank
Two possibilities are offered:
-Tank integrated in the motor
Tractable mobile version
-Tank integrated in the frame; the capacity is - Electric starter
greater in this case and varies depending on - Tank in the frame

the model.
• Accessories
Various accessories are available so that the
motor-pump units can be connected quickly.
See chapter on accessories.

5
 S

ATEX CODIFICATION ATEX PROBE

II 2G c Ex de IIC T4 X An ATEX PT100 type temperature probe

with integrated transmitter is provided for the
ATEX brand operation of the pump in the ATEX zone. It is
attached directly to the body of the pump and
Unit: continuously indicates the temperature of the
- Unit II: Excluding mines transmitted fluid.

Category Probe features:

- 3G: Category 3 Gas (for Zone 2) - Protection mode: intrinsic security Ex ia
- 2G: Category 2 Gas (for Zone 1) - Measurement range: 0 -150 °C
- Output signal: 4 – 20 mA
Mechanical protection - Supply voltage.: 6,4 – 36 VDC
- c: by construction

Motor protection mode

- d: Flame-proof cover
- de: Flame-proof cover & enhanced security

Gas unit
- IIB: Gas unit IIB
- IIC: Gas unit IIC

Temperature category
- T4 = max. surface temperature 135 °C

Additional information provided in the operating instructions

ZINC ANODE

A galvanic zinc anode option is available for Advantage: This option allows for the use of a
seawater applications. cast iron pump in seawater application. The cost
price is therefore lower than that of an equivalent
Operation: The zinc anode is mainly attacked stainless steel or bronze pump.
by corrosion and therefore protects cast iron
against aggression from seawater. The anode
has to be replaced after a certain time, depen-
ding mainly on the salt concentration and tem-
perature of the seawater.

6
 S

REPRESENTATIVE CROSS-SECTION
Cross- N° Description Type A Type B Type C
Pump size
section 1 Body X X X
Type A 40, 42, 45, 50, 60, 80, 82, 83, 100 2 Front wear plate X X X
Type B 41, 46, 51, 61 3 Impeller X X X
4 IEC adaptation lantern X X X
63, 65, 66, 68, 69, 85, 88, 91, 105, 108,
Type C 5 Lantern base X X X
121, 150, 161, 170, 180, 201, 220, 230
6 Bracket X X X
7 Shaft X X X
8 Bearing cover X X X
9 Rear wear plate X
10 Valve holder X X X
14 Valve X X X
16 Lid or drain plug X X X
17 Gasket (drain) X X X
19 Mechanical seal case X X X
20 Case flange X
21 Discharge flange X X X
22 Flange gasket X X X
23 Lid or firing plug X X X
24 Firing plug gasket X X X
25 Mechanical seal X X X
26 Inspection panel X X X
27 Gasket (inspection panel) X X X
33 Impeller nut X X X
42 Shell gasket X X
43 Body gasket X X X
44 Case gasket X
58 Motor side bearing X X X
59 Pump side bearing X X X
64 Spacer ring X X
70 Greaser X X X
80 Electric motor X X X
81 Support foot X X X
93 Half-coupling X X X
94 Elastic seal X X X
95 Half-coupling X X X

Assembly 11 Assembly 21&31

Type A & C Type A & C

Type B Type B

7
 S

ACCESSORIES
Quick spherical connections :
For discharge

➍ ➎ ➐
➎ For extension
➌ ➍
➎
➎
➊ For suction (except DN 200) For suction DN 200 only

➊ ➎ ➋ ➊ ➎ ➌ ➎ 2b ➎ 8b

Quick connections available 11/2” 2” 3” 4” DN150 DN200

Compatible pump version threaded opening special flanges

Male connector -
➊ threaded or flanged
(according to size))
4108523 4132146 4118400 4118442 4132163 4118448

Suction pipe with 4108524 (5m) 4132147 (5m) 4132154 (5m) 4132158 (5m) 4132164 (5m)

➋ strainer and female

connector 4071771 (6m) 4132148 (6m) 4118401 (6m) 4118443 (6m) 4132165 (6m)

4145711 (3m)
Suction pipe WITHOUT
2b strainer and with male 4145774 (4m)
and female connectors
4145712 (5m)

➌ 90° elbow with male

and female connectors
4108525 4108525 4118402 4118444 4132166 4118451

4108526 (10m) 4108526 (10m) 4118404 (10m) 4132159 (5m) 4132167 (10m) 4118453 (5m)
Flat pipe for discharge

➍ (reinforced nylon PVC)

with male and female
4132149 (15m) 4132149 (15m) 4118405 (25m) 4118445 (10m) 4132168 (15m) 4118454 (10m)

connectors
4132150 (30m) 4132150 (30m) 4118446 (20m)

➎ Gasket 4108527 4108527 4118406 4118447 4132169 4118455

➏ Smooth male connector 4132144 4132151 4132155 4132160 4132170 4132173

➐ Smooth female
connector
4108528 4132152 4132156 4132161 4132171 4132174

➑ Strainer without
connector
4132145 4132153 4132157 4132162 4132172

Strainer with female

8b 4145713
connector

8
 S

SUCTION PERFORMANCES
HMT
• Suction flow limitation:
The curves shown in the technical information
are traced for a suction head of 1m.

When the suction head is greater the maxi-

mum flow provided by the pump will be
reduced as follows:
- 1 m: no correction
- 3 m: max. flow = ¾ of max. flow of pump
- 6 m: max. flow = ½ of max. flow of pump
6m 3m 1m
(courbe de
référence)

Q m3/h ½ Qmax ¾ Qmax Qmax

SELF-PRIMING
• Self-priming capacity:
Pump size Speed Firing time in seconds according to the suction head.
2 3 4 5 6
The self-priming capacity of pumps S can S40 2900 21 47 78 135
reach 6m depending on the models. The firing S41 2900 27 57 93 153
times are given in the table opposite for water S45 2900 12 22 35 47 62
at 20°C and a minimum line length in the DN S46 2900 5 8 13 23 34
of the pump. S50 2900 17 29 46 83
S51 2900 19 34 55 87 155
S60 2900 19 29 42 56 77
S61 2900 10 15 21 29 41
S63 2900 7 10 14 19 33
S65 1450 30 58 83 186
S68 2900 9 14 19 26 38
S80(-2) 2900 36 49 62 74 95
S80 2900 21 53 95 132
S83 2900 14 20 26 31 39
S85 1450 32 63 100 152
S88 2900 4 7 11 18 26
S88 (210) 2900 5 8 11 15 20
S100 2900 19 30 38 45 54
S105 1450 38 69 110 167
S105 2300 9 13 17 21 25
S105 T114 1450 30 62 110 189
S108 2900 10 14 18 22 27
S120 1450 10 18 31 50 95
S150 1450 33 71 117 176
S160 1450 15 26 41 63 93
S170 950 28 51 85 129 181

NPSH REQUIRED

• Suction capacity:

The firing capacity and the suction capacity The suction capacity of the pump (NPSH)
are two different concepts. represents its ability to take out liquid when
it is fired.

9
 S

HYDRAULIC PRESELECTION GUIDE

CAST IRON pump curves (F,Z,E)

H (mCE)
70

60 S68

50 S63 S88
S108
40
S83 S230
30 S45 S60 S180
S100
20 S91 S121
S161
S50 S80
S40/42 S85 S201
10 S65 S105
S150 S170 S220

0
1 10 Q (m3/h) 100 1000

STAINLESS STEEL pump curves (X)

H (mCE)
70

S69
60

50 S88
S108
40
S61
30
S46
S121
20
S82
S51 S161
S41 S66 S85
10 S105

0
1 10 Q (m3/h) 100 1000

10
 S

HYDRAULIC PERFORMANCES

16 40
Hm
S40-S41-S42
Hm
S45
50 Hz 50 Hz
14 35
12 2 POLES 30
2 POLES
10
25
8
20
6

4 15

2
10
0
0 Qm3/h 5 10 15 20 25 5
m
7 0
NPSH Qm3/h 5 10 15 20 25
5 m
5 NPSH
3 4
1 3
0 Qm3/h 5 10 15 20 25 2
1,0 1
kW Qm3/h 5 10 15 20 25
0,8 3,0 kW
0,6
2,5
0,4
0,2 2,0
0,0
0 Qm /h 1,5
3
5 10 15 20 25
Qm3/h 5 10 15 20 25

40 20
Hm
S46 Hm
S50-S51
35
50 Hz 50 Hz
2 POLES 15
2 POLES
30

25

20 10

15

10 5

0 0
0Qm3/h 5 10 15 20 25 Qm3/h 10 20 30 40
m
m NPSH
5 NPSH 5
4 4
3 3
2
2
1
1 Qm3/h 10 20 30 40
Qm3/h 5 10 15 20 25 2,5
3,0 kW
kW 2,0
2,5
1,5
2,0
1,0
1,5 Qm3/h 10 20 30 40
Qm3/h 5 10 15 20 25

11
 S

HYDRAULIC PERFORMANCES

40 Hm
Hm
S60- S61 S63
50 Hz 50
50 Hz
2 POLES 2 POLES
30

40

20
30

10
20

0 10
Qm3/h 10 20 30 40 50 Qm3/h 10 20 30 40 50
m NPSH m6 NPSH
5 5
4 4
3 3
2 2
1 1
Qm3/h 10 20 30 40 50 Qm3/h 10 20 30 40 50
kW kW
4,0 6,5

3,0 5,5

2,0 4,5
Qm3/h 10 20 30 40 50 Qm3/h 10 20 30 40 50

16 70
Hm
S65 - S66 Hm
S68 - S69
50 Hz
14
50 Hz
60

12
4 POLES 50 2 POLES
10
40
8
30
6
20
4

2 10

0 0
Qm3/h 5 10 15 20 25 30 35 40 45 Qm3/h 10 20 30 40 50 60 70
m
7 m
NPSH 7
5 NPSH
5
3
3
1
Qm3/h 5 10 15 20 25 30 35 40 45 1
kW kW Qm /h 10 20 30 40 50 60 70
3
2,5 12,0
2,0 10,0
1,5 8,0
1,0 6,0
0,5 4,0
2,0
0,0 0,0
Qm3/h 10 15 20 25 30 35 40 45 Qm3/h 10 20 30 40 50 60 70

12
 S

HYDRAULIC PERFORMANCES

40
S83
25
Hm
S80 - S82 Hm

50 Hz 50 Hz
20
2 POLES 2 POLES
30

15

20

10

10
5

0 0
Qm3/h 20 40 60 80 Qm3/h 20 40 60 80 100
m m
NPSH
5 NPSH 5
4 4
3 3
2 2
1 1
Qm3/h 20 40 60 80 Qm3/h 20 40 60 80 100
7,0
kW kW
4,0 6,5
6,0
3,0
5,5
2,0 5,0
Qm3/h 20 40 60 80 Qm3/h 20 40 60 80 100

20 30
Hm
S85 Hm S91
50 Hz 25
50 Hz
4 POLES
15 4 POLES
20

15
10

10

5 5

0
Qm3/h 20 40 60 80 100 120 140
0 m NPSH
Qm3/h 10 20 30 40 50 60 70 80 90 7
m NPSH
5 5
4
3 3
2
1
1 Qm3/h
Qm3/h 10 20 30 40 50 60 70 80 90 20 40 60 80 100 120 140
8,0
kW
kW
3,5 6,0
3,0 4,0
2,5 2,0
2,0
Qm3/h 10 20 30 40 50 60 70 80 90 0,0
Qm3/h 20 40 60 80 100 120 140

13
 S

HYDRAULIC PERFORMANCES

Hm
S105
35
Hm
S100 15

30 50 Hz 50 Hz
2 POLES 4 POLES
13
25

11
20

9
15

10 7

5 5
Qm3/h 20 40 60 80 100 120 140 160 Qm3/h 40 60 80 100 120 140
m m
NPSH
5 NPSH
3
4
2 3
2
1 1
Qm3/h 20 40 60 80 100 120 140 160 40 60 80 100 120 140
Qm3/h
8 6,0
kW kW
7 5,0

6 4,0
Qm3/h 20 40 60 80 100 120 140 160
Qm3/h 40 60 80 100 120 140

60
S108
Hm 27
Hm
S121
50 Hz 25
50 Hz
50 2 POLES 23 4 POLES
21

40 19

17

30 15

13

20 11

10 7
Qm3/h 40 60 80 100 120 140 160 Qm3/h 40 60 80 100 120 140 160 180 200
m NPSH m NPSH
5 5
4 4
3 3
2 2
1 1
Qm3/h 40 60 80 100 120 140 160 Qm3/h 40 60 80 100 120 140 160 180 200
20,0 11,0
kW
kW 10,0
18,0
9,0
16,0 8,0
7,0
14,0 Qm3/h 40 60 80 100 120 140 160 180 200
20 40 60 80 100 120 140 160

14
 S

HYDRAULIC PERFORMANCES

16
Hm
S150 Hm
S161
14
50 Hz 20 50 Hz
4 POLES 4 POLES
12
15
10

8 10

6
5
4
0 Qm3/h
2 50 100 150 200 250 300 350 400
m
0 7
Qm3/h 100 150 200 250 NPSH
m NPSH 5
5
3
4
3 1
2 Qm3/h 50 100 150 200 250 300 350 400
1
Qm3/h 100 150 200 250 kW
10,0 15,0
kW
10,0
8,0 5,0
0,0
6,0
Qm3/h 100 150 200 250 0 Qm3/h 50 100 150 200 250 300 350 400

18 40
Hm
S170
Hm
S180
50 Hz
16

14 50 Hz 35 6 POLES
12
6 POLES
10 30

6
25
4

2
20
0
0 Qm /h
3 50 100 150 200 250 300 350
m NPSH 15
7 Qm3/h 100 150 200 250 300 350
5 m NPSH
5
3 4
3
1 2
0 Qm3/h 50 100 150 200 250 300 350 1
12,0
kW Qm3/h 100 150 200 250 300 350
10,0
8,0 30,0 kW
6,0 26,0
4,0
2,0 22,0
0,0 18,0
0 Qm3/h 50 100 150 200 250 300 350 Qm3/h 100 150 200 250 300 350

15
 S

HYDRAULIC PERFORMANCES

18

S220
Hm
19 S201 Hm
16

17
50 Hz 14 50 Hz
4 POLES 6 POLES
12
15
10
13 8

6
11
4
9
2

7 0
0 Qm3/h 100 200 300 400 500 600
5
m NPSH
7
Qm3/h 100 150 200 250 300 350 400 450 500
m NPSH 5
5
4 3
3
2 1
1 0 Qm3/h 100 200
Qm3/h 100 150 200 250 300 350 400 450 500 kW
20,0
22,0
kW 15,0
20,0
10,0
18,0 5,0
16,0 3 0,0
Qm /h 100 150 200 250 300 350 400 450 500
0 Qm3/h 100 200 300 400 500 600

40
Hm
S230
50 Hz
35 4 POLES

30

25

20

15 Qm3/h 150 250 350 450 550 650

m NPSH
5
4
3
2
1
Qm3/h 150 250 350 450 550 650
60,0
kW
50,0

40,0

30,0 3
Qm /h 150 250 350 450 550 650

16
 S

MONOBLOC SPACE REQUIREMENT (11)

Threaded Flanged DN
TYPE A1 A2 B1 B2 B3 F1 H1 H2 H3 M2 M3 N1* N3 P1 P2 R1 R3 S1 S3
DN PN16
40-41-42 1 1/2" 40 97 132 7 29 200 366 187 69 110 186 100 110 190 87 122 1,5 M8 9
45-46 1 1/2” 40 121 156 7 80 273 393 237 74 115 182 125 110 210 111 146 2 M8 9
50-51 2” 50 112 158 9 36 231 428 225 86 133 217 125 110 210 102 158 2 M8 9
60-61 2” 50 112 158 9 36 257 457 267 86 133 234 140 140 240 97 158 3 M8 9
63 2” 50 143 189 9,5 94 317 453 272 86 133 212 140 140 260 128 174 3 M8 9
65-66 2” 50 112 158 9,5 60 309 480 310 86 133 265 140 260 240 88 134 18 3 14 9
68-69 2” 50 112 158 9,5 60 309 597 310 86 133 246 270 260 216 88 134 18 4 14 9
80-82 3" 80 140 188 13 40 283 466 277 102 158 243 140 140 240 125 173 3 M8 9
83 3" 80 170 218 14 85 292 461 277 102 158 220 140 160 260 155 203 3 M8 9
85 3" 80 195 243 16 106 367 459 310 102 158 265 140 260 240 150 198 18 3 14 9
88 3" 80 195 243 16 106 367 576 310 102 158 246 270 260 216 150 198 18 4 14 9
100 4" 100 158 225 18 50 327 616 320 127 200 246 270 260 216 153 220 18 4 14 9

17
 S

BIBLOC SPACE REQUIREMENT (21)

Threaded Flanged DN
TYPE A1 A2 B1 B2 B3 F2 H2 H3 H5 H6 L1 M4 N4 N5 P1 P2 R4 R5 S1 R5
DN PN16
40-41-42 1 1/2" 40 97 132 7 29 200 311 69 110 110 207 545 337 140 180 87 122 3 3 10 10
45-46 1 1/2” 40 121 156 7 80 273 324 74 115 130 257 605 349 140 200 111 146 3 3 10 10
50-51 2” 50 112 158 9 36 231 359 86 133 130 245 640 384 140 200 102 158 3 3 10 10
60-61 2” 50 112 158 9 36 257 424 86 133 160 295 757 458 200 230 97 158 3 4 12 10
63 2” 50 143 189 9,5 94 317 419 86 133 160 300 792 458 250 230 128 174 5 4 14 10
65-66 2” 50 112 158 9,5 60 309 483 86 133 160 310 816 526 200 260 88 134 3 18 12 14
68-69 2” 50 112 158 9,5 60 309 535 86 133 180 330 1013 588 250 260 88 134 6 38 14 11
80-82 3" 80 140 188 13 40 283 433 102 158 160 305 766 467 200 230 125 173 3 4 12 10
83 3" 80 170 218 14 85 292 423 102 158 160 305 796 461 250 250 155 203 5 4 14 10
85 3" 80 195 243 16 106 367 462 102 158 160 310 795 526 200 260 150 198 3 18 12 14
88 3" 80 195 243 16 106 367 514 102 158 180 330 992 588 250 260 150 198 6 38 14 11
100 4" 100 158 225 17,5 50 327 554 127 200 180 340 1032 588 250 260 153 220 6 38 14 11
105 4" 100 228 295 17 107 349 493 127 200 180 345 866 551 250 260 193 260 5 18 14 14
108 4" 100 228 295 17 107 383 596 127 200 180 345 1074 666 250 260 193 260 6 18 14 14
121 4" 100 248 315 19 143 412 612 122 195 220 390 1090 676 250 295 213 280 6 18 14 14
150 150 103 340 26 109 445,5 660,5 140 243 200 380 1199 725 250 295 202 340 6 18 14 14
161 150 237 340 26 139 506,5 670,5 140 243 230 410 1283,5 740 250 315 202 340 6 18 14 14

18
 S

SPACE REQUIREMENT ON BASE (31)

Flanged DN
TYPE A1 A2 B1 B2 B6 F H1 H3 H7 L2 L3 L4 L5 N6 P1 P2 R6 S6
PN16
170 150 279 382 26 173 610 602 490 249 103 1686 250 940 502 550 229 332 53 29
180 150 279 382 26 173 610 602 490 249 103 1870 250 940 502 550 229 332 53 29
201 200 339 471 36 140 610 617,5 461 300 103 1855,5 250 940 596 550 294 426 53 29
220 200 340 463 36 179 610 622 530 283 103 1852 250 940 583 550 290 413 53 29
230 200 340 463 36 179 660 622 530 283 123 2050 290 1060 623 600 290 413 63 29

SPACE REQUIREMENT ON BASE WITH SPACER (32)

Flanged
TYPE A1 A2 B1 B2 B6 F H1 H3 H7 L2 L3 L4 L5 N6 P1 P2 R6 S6 X
DN PN16
170 150 279 382 26 173 660 602 490 249 123 1826 290 1060 542 600 229 332 63 29 140
180 150 279 382 26 173 660 602 490 249 123 2010 290 1060 542 600 229 332 63 29 140
201 200 339 471 36 140 660 617,5 461 300 123 1995,5 290 1060 636 600 294 426 63 29 140
220 200 340 463 36 179 660 622 530 283 123 1992 290 1060 623 600 290 413 63 29 140
230 200 340 463 36 179 660 622 530 283 123 2190 290 1060 623 600 290 413 63 29 140

19
 S

BARE SHAFT PUMP SPACE REQUIREMENT (35)

Threaded Flanged
TYPE A1 A2 B1 B2 B3 D E1 F H1 H2 H3 H4 M1 N1* N2 P1 P2 R1 R2 S1 S2 T U W
DN DN PN16
40-41-
1 1/2" 40 97 132 7 29 200 19 40 267 187 69 110 90 202 110 80 87 122 3 M8 10 21,5 6 35
42
45-46 1 1/2” 40 121 156 7 80 273 19 40 270 237 74 115 110 200 110 100 111 146 3 M8 10 21,5 6 40
50-51 2” 50 112 158 9 36 231 19 40 305 225 86 133 110 235 110 100 102 158 3 M8 10 21,5 6 40
60-61 2” 50 112 158 9 36 257 28 60 361 267 86 133 132 273 140 125 97 158 4 M8 13 31 8 42,5
63 2” 50 143 189 9,5 94 317 28 60 336 272 86 133 132 248 140 125 128 174 4 M8 13 31 8 43
65-66 2” 50 112 158 9,5 60 309 28 60 421 310 86 133 160 344 260 150 88 134 18 5 14 14 31 8 41
68-69 2” 50 112 158 9,5 60 309 28 60 421 310 86 133 160 344 260 150 88 134 18 5 14 14 31 8 41
80-82 3" 80 140 188 13 40 283 28 60 370 277 102 158 132 282 140 125 125 173 4 M8 13 31 8 43
83 3" 80 170 218 14 85 292 28 60 340 277 102 158 132 252 160 125 155 203 4 M8 13 31 8 43
85 3" 80 195 243 16 106 367 28 60 400 310 102 158 160 344 260 150 150 198 18 5 14 14 31 8 41,5
88 3" 80 195 243 16 106 367 28 60 400 310 102 158 160 344 260 150 150 198 18 5 14 14 31 8 41,5
91 3" 80 211 259 14 135 419 32 80 491 350 97 153 200 387 295 150 175 223 18 6 14 14 35 10 60
100 4" 100 158 225 18 50 327 28 60 440 320 127 200 160 344 260 150 153 220 18 5 14 14 31 8 41,5
105 4" 100 228 295 17 107 349 28 60 410 345 127 200 180 344 260 150 193 260 18 5 14 14 31 8 41
108 4" 100 228 295 17 107 383 32 80 487 345 127 200 180 392 260 150 193 260 18 5 14 14 35 10 50
121 4" 100 248 315 19 143 412 32 80 497 390 122 195 220 392 295 150 213 280 18 6 14 14 35 10 60,5
150 150 103 340 26 109 446 32 80 547 380 140 243 200 447 295 150 202 340 18 6 14 14 35 10 55
161 150 237 340 26 139 507 32 80 557 410 140 243 230 457 315 150 202 340 18 6 14 14 35 10 55
170 150 279 382 26 173 580 42 90 602 490 146 249 280 489 380 260 229 332 25 8 18 18 45 12 77
180 150 279 382 26 173 580 42 90 602 490 146 249 280 489 380 260 229 332 25 8 18 18 45 12 77
201 200 339 471 36 140 583 42 90 618 461 168 300 280 500 410 260 294 426 25 8 18 18 45 12 77
220 200 340 463 36 179 642 42 90 622 530 160 283 310 509 450 260 290 413 25 8 18 18 45 12 73
230 200 340 463 36 179 642 42 90 622 530 160 283 310 509 450 260 290 413 25 8 18 18 45 12 73

20