GE Version : 1.

1
Date of preparation : 11 January 2017
Water & Process Technologies

SAFETY DATA SHEET

BETZDEARBORN CP1155
1. Identification
GHS product identifier BETZDEARBORN CP1155
Other means of identification None.
Recommended use of the chemical and restrictions on use
Recommended use Organic sludge dewatering
Recommended restrictions None known.

Company/undertaking identification
8F Net Cube Center
30th St., cor. 3rd Avenue,
E-Square Zone, Crescent Park West,
Bonifacio Global City
1634 Taguig City, Philippines
General Electric Philippines, Inc.

Emergency telephone
1-800-1-116-1020 (Philippines)

+1 703-527-3887 (US)

2. Hazard(s) identification
Physical hazards Not classified.
Health hazards Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2A
Environmental hazards Hazardous to the aquatic environment, acute Category 2
hazard
Hazardous to the aquatic environment, Category 2
long-term hazard
Label elements

Signal word None.

Hazard statement Causes skin irritation. Causes serious eye irritation. Toxic to aquatic life. Toxic to aquatic life with long
lasting effects.
Precautionary statement
Prevention Wash thoroughly after handling. Avoid release to the environment. Wear eye protection/face
protection. Wear protective gloves.
Response IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical
advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing
and wash it before reuse. Collect spillage.
Storage Store away from incompatible materials.
Disposal Dispose of contents/container in accordance with local/regional/national/international regulations.

Product: BETZDEARBORN CP1155 - Page 1 of 7

GE Version : 1.1
Date of preparation : 11 January 2017
Water & Process Technologies

SAFETY DATA SHEET

BETZDEARBORN CP1155
Other hazards which do not result None known.
in classification
Supplemental information None.
National/local information Not available

3. Composition/information on ingredients
Mixtures
Chemical identity Common name and synonyms CAS number %
Sulphamic acid 5329-14-6 <= 10

4. First-aid measures
Inhalation Move to fresh air. Call a physician if symptoms develop or persist.
Skin contact Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention. Wash
contaminated clothing before reuse.
Eye contact Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Ingestion Rinse mouth. Get medical attention if symptoms occur.
Most important Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Skin
symptoms/effects, acute and irritation. May cause redness and pain.
delayed
Indication of immediate medical Provide general supportive measures and treat symptomatically. Keep victim under observation.
attention and special treatment Symptoms may be delayed.
needed
General information Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect
themselves.

5. Fire-fighting measures
Suitable extinguishing media Not available.
Unsuitable extinguishing media Not available.
Specific hazards arising from the During fire, gases hazardous to health may be formed.
chemical
Special protective equipment and Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
precautions for firefighters
Fire fighting Use water spray to cool unopened containers.
equipment/instructions
Specific methods Use standard firefighting procedures and consider the hazards of other involved materials.
General fire hazards No unusual fire or explosion hazards noted.

6. Accidental release measures

Personal precautions, protective Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear appropriate
equipment and emergency protective equipment and clothing during clean-up. Do not touch damaged containers or spilled
procedures material unless wearing appropriate protective clothing. Ensure adequate ventilation. Local authorities
should be advised if significant spillages cannot be contained. For personal protection, see section 8 of
the SDS.

Product: BETZDEARBORN CP1155 - Page 2 of 7

GE Version : 1.1
Date of preparation : 11 January 2017
Water & Process Technologies

SAFETY DATA SHEET

BETZDEARBORN CP1155
Methods and materials for Prevent product from entering drains.
containment and cleaning up
Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is
possible. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery,
flush area with water.

Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove
residual contamination.

Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.
Environmental precautions Avoid release to the environment. Inform appropriate managerial or supervisory personnel of all
environmental releases. Prevent further leakage or spillage if safe to do so. Avoid discharge into drains,
water courses or onto the ground.

7. Handling and storage

Precautions for safe handling Avoid contact with eyes, skin, and clothing. Provide adequate ventilation. Wear appropriate personal
protective equipment. Avoid release to the environment. Observe good industrial hygiene practices.
Conditions for safe storage, Store in original tightly closed container. Store away from incompatible materials (see Section 10 of the
including any incompatibilities SDS).

8. Exposure controls/personal protection

Occupational exposure limits No exposure limits noted for ingredient(s).
Biological limit values No biological exposure limits noted for the ingredient(s).
Appropriate engineering controls Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be
matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other
engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits
have not been established, maintain airborne levels to an acceptable level. Eye wash facilities and
emergency shower must be available when handling this product.
Individual protection measures, such as personal protective equipment
Eye/face protection Wear safety glasses with side shields (or goggles).

Skin protection
Hand protection Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove supplier.
Other Wear appropriate chemical resistant clothing.
Respiratory protection In case of insufficient ventilation, wear suitable respiratory equipment.
Thermal hazards Wear appropriate thermal protective clothing, when necessary.
General hygiene considerations Always observe good personal hygiene measures, such as washing after handling the material and
before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to
remove contaminants.

9. Physical and chemical properties

Appearance Powder
Physical state Solid.
Form Solid.
Color White to off-white
Odor Slight
Odor threshold Not available.
pH in aqueous solution 3 (0.5% SOL.)
Melting point/freezing point Not available.
Initial boiling point and boiling Not available.
range
Flash point P-M(CC) None

Product: BETZDEARBORN CP1155 - Page 3 of 7

GE Version : 1.1
Date of preparation : 11 January 2017
Water & Process Technologies

SAFETY DATA SHEET

BETZDEARBORN CP1155
Evaporation rate < 1 (Ether = 1)
Flammability (solid, gas) Not available.
Upper/lower flammability or explosive limits
Flammability limit - lower (%) Not available.
Flammability limit - upper Not available.
(%)
Explosive limit - lower (%) Not available.
Explosive limit - upper (%) Not available.
Vapor pressure < 1 mm Hg
Vapor pressure temp. 21 °C
Vapor density < 1 (Air = 1)
Relative density Not available.
Relative density temperature 21 °C
Solubility(ies)
Solubility (water) 1%
Partition coefficient <0
(n-octanol/water)
Auto-ignition temperature Not available.
Decomposition temperature Not available.
Viscosity Not available.
Viscosity temperature 21 °C
Other information
Explosive properties Not explosive.
Oxidizing properties Not oxidizing.
Percent volatile 0 (Estimated)

10. Stability and reactivity

Chemical stability Not available.
Possibility of hazardous reactions Hazardous polymerization does not occur.
Conditions to avoid Contact with incompatible materials.
Incompatible materials Strong oxidizing agents.
Hazardous decomposition Toxic gas.
products
Reactivity The product is stable and non-reactive under normal conditions of use, storage and transport.

11. Toxicological information

Information on likely routes of exposure
Inhalation No adverse effects due to inhalation are expected.
Skin contact Causes skin irritation.
Eye contact Causes serious eye irritation.
Ingestion Expected to be a low ingestion hazard.
Symptoms related to the Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Skin
physical, chemical and irritation. May cause redness and pain.
toxicological characteristics
Information on toxicological effects
Acute toxicity

Product: BETZDEARBORN CP1155 - Page 4 of 7

GE Version : 1.1
Date of preparation : 11 January 2017
Water & Process Technologies

SAFETY DATA SHEET

BETZDEARBORN CP1155
Product Species Test Results
BETZDEARBORN CP1155 (CAS Mixture)
Acute
Dermal
LD50 Rabbit > 5000 mg/kg, (Calculated according to GHS
additivity formula)
Inhalation
LC50 Rat > 5 mg/l, 4 Hour, (Calculated according to
GHS additivity formula)
Oral
LD50 Rat > 5000 mg/kg, (Calculated according to GHS
additivity formula)
Components Species Test Results
Sulphamic acid (CAS 5329-14-6)
Acute
Dermal
LD50 Rabbit > 2000 mg/kg
Oral
LD50 Rat 2140 mg/kg

* Estimates for product may be based on additional component data not shown.
Skin corrosion/irritation Prolonged skin contact may cause temporary irritation.
Serious eye damage/eye irritation Direct contact with eyes may cause temporary irritation.
Respiratory or skin sensitization
Respiratory sensitization Not a respiratory sensitizer. This product is not expected to cause respiratory sensitization.
Skin sensitization This product is not expected to cause skin sensitization.
Germ cell mutagenicity No data available to indicate product or any components present at greater than 0.1% are mutagenic or
genotoxic.
Carcinogenicity
Philippines OELs: Carcinogen category
Not listed.
Reproductive toxicity This product is not expected to cause reproductive or developmental effects.
Specific target organ toxicity Not available.
- single exposure
Specific target organ toxicity Not available.
- repeated exposure
Aspiration hazard Not an aspiration hazard. Based on available data, the classification criteria are not met.

12. Ecological information

Ecotoxicity Toxic to aquatic life with long lasting effects.
Product Species Test Results
BETZDEARBORN CP1155 (CAS Mixture)
LC50 Fathead Minnow 5.1 mg/L, Static Renewal Bioassay, 96 hour
NOEL Fathead Minnow 2.5 mg/L, Static Renewal Bioassay, 96 hour
Aquatic
Crustacea 10% Mortality Daphnia magna 31.3 mg/L, Static Renewal Bioassay, 48
hour

Product: BETZDEARBORN CP1155 - Page 5 of 7

GE Version : 1.1
Date of preparation : 11 January 2017
Water & Process Technologies

SAFETY DATA SHEET

BETZDEARBORN CP1155
Product Species Test Results
LC50 Daphnia magna 125 mg/L, Static Renewal Bioassay, 48
hour

* Estimates for product may be based on additional component data not shown.
Bioaccumulative potential Not bioaccumulating
Bioaccumulative potential
Octanol/water partition coefficient log Kow
BETZDEARBORN CP1155 <0
Mobility in soil No data available.
Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential,
endocrine disruption, global warming potential) are expected from this component.
Environmental fate Toxic to aquatic life with long lasting effects. An environmental hazard cannot be excluded in the event
of unprofessional handling or disposal.
Persistence and degradability
At natural pHs (>6) the product degrades due to hydrolysis to more than 70% in 28 days.
The hydrolysis products are not harmful to aquatic organisms.
- COD (mgO2/g) 1760
- BOD 5 (mgO2/g) 320
- BOD 28 (mgO2/g) 362
- Closed Bottle Test (% 21
Degradation in 28 days)
- Zahn-Wellens Test (% 49
Degradation in 28 days)
- TOC (mg C/g) 470

13. Disposal considerations

Disposal instructions Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not allow this
material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditches with
chemical or used container. Dispose of contents/container in accordance with
local/regional/national/international regulations.
Local disposal regulations Dispose in accordance with all applicable regulations.
Waste from residues / unused Dispose of in accordance with local regulations. Empty containers or liners may retain some product
products residues. This material and its container must be disposed of in a safe manner (see: Disposal
instructions).
Contaminated packaging Since emptied containers may retain product residue, follow label warnings even after container is
emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal.

14. Transport information

IATA
Not regulated as dangerous goods.
IMDG
Not regulated as dangerous goods.
SEA (Annex II of MARPOL 73/78 and Not applicable.
the IBC Code)

15. Regulatory information

Safety, health and environmental regulations specific for the product in question
Controlled Precursors & Essential Chemicals (Comprehensive Dangerous Drugs Act of 2002 (Republic Act 9165), as amended thru
Dangerous Drugs Board Regulations)
Not regulated.

Product: BETZDEARBORN CP1155 - Page 6 of 7

GE Version : 1.1
Date of preparation : 11 January 2017
Water & Process Technologies

SAFETY DATA SHEET

BETZDEARBORN CP1155

Ozone Depleting Substances (ODS) (Chemical Control Order, DENR Admin. Order No. 2013-25)
Not regulated.
Priority Chemical List (PCL) (DENR Administrative Order No. 98-58)
Not regulated.
International regulations The product does not need to be labelled in accordance with EC directives or respective national laws.
International Inventories
Country(s) or region Inventory name On inventory (yes/no)*
Australia Australian Inventory of Chemical Substances (AICS) Yes
Canada Domestic Substances List (DSL) Yes
Canada Non-Domestic Substances List (NDSL) No
China Inventory of Existing Chemical Substances in China (IECSC) Yes
Europe European Inventory of Existing Commercial Chemical Substances Yes
(EINECS)
Europe European List of Notified Chemical Substances (ELINCS) No
Japan Inventory of Existing and New Chemical Substances (ENCS) Yes
Korea Existing Chemicals List (ECL) Yes
New Zealand New Zealand Inventory Yes
Philippines Philippine Inventory of Chemicals and Chemical Substances (PICCS) Yes
United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory Yes
*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)
A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing
country(s).

16. Other information

Issue date Jan-11-2017
Revision date 11/01/2017
Version # 1.1
References: No data available
Disclaimer The information provided in this Safety Data Sheet is correct to the best of our knowledge, information
and belief at the date of its publication. The information given is designed only as a guidance for safe
handling, use, processing, storage, transportation, disposal and release and is not to be considered a
warranty or quality specification. The information relates only to the specific material designated and
may not be valid for such material used in combination with any other materials or in any process,
unless specified in the text.
Revision information Product and Company Identification: Product and Company Identification
Composition / Information on Ingredients: Disclosure Overrides
Physical & Chemical Properties: Multiple Properties
Toxicological Information: Toxicological Data
Ecological Information: Ecotoxicity
Transport Information: Material Transportation Information
Regulatory Information: Hazard Symbol - Labeling
HazReg Data: Europe - EU
GHS: Classification
HAZARDS IDENTIFICATION:
REGULATORY INFORMATION:
* Trademark of General Electric Company. May be registered in one or more countries.

Product: BETZDEARBORN CP1155 - Page 7 of 7