Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 131 views

    Scope and Objective of The Course

    Uploaded by

    K.KARTHIKEYAN IYER
    This document provides details about the Analog & Digital VLSI Design course including: 1. The objective is to provide an introduction to fundamentals and practical considerations of integrated circuit design, covering both analog and digital circuits. 2. Textbooks and reference materials are listed, with primary references being books on digital and analog CMOS integrated circuit design. 3. The course plan outlines 9 topics to be covered over lectures, including VLSI design methodologies, CMOS technology, operational amplifiers, noise, logic circuits, memory circuits, and design verification. 4. Student evaluation includes a midterm test, two quizzes, assignments, and a comprehensive final examination.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Scope and Objective of The Course

    Uploaded by

    K.KARTHIKEYAN IYER
    131 views3 pages
    This document provides details about the Analog & Digital VLSI Design course including: 1. The objective is to provide an introduction to fundamentals and practical considerations of integrated circuit design, covering both analog and digital circuits. 2. Textbooks and reference materials are listed, with primary references being books on digital and analog CMOS integrated circuit design. 3. The course plan outlines 9 topics to be covered over lectures, including VLSI design methodologies, CMOS technology, operational amplifiers, noise, logic circuits, memory circuits, and design verification. 4. Student evaluation includes a midterm test, two quizzes, assignments, and a comprehensive final examination.

    Original Title

    ADVD_Handout.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides details about the Analog & Digital VLSI Design course including: 1. The objective is to provide an introduction to fundamentals and practical considerations of integrated circuit design, covering both analog and digital circuits. 2. Textbooks and reference materials are listed, with primary references being books on digital and analog CMOS integrated circuit design. 3. The course plan outlines 9 topics to be covered over lectures, including VLSI design methodologies, CMOS technology, operational amplifiers, noise, logic circuits, memory circuits, and design verification. 4. Student evaluation includes a midterm test, two quizzes, assignments, and a comprehensive final examination.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    131 views3 pages

    Scope and Objective of The Course

    Uploaded by

    K.KARTHIKEYAN IYER
    This document provides details about the Analog & Digital VLSI Design course including: 1. The objective is to provide an introduction to fundamentals and practical considerations of integrated circuit design, covering both analog and digital circuits. 2. Textbooks and reference materials are listed, with primary references being books on digital and analog CMOS integrated circuit design. 3. The course plan outlines 9 topics to be covered over lectures, including VLSI design methodologies, CMOS technology, operational amplifiers, noise, logic circuits, memory circuits, and design verification. 4. Student evaluation includes a midterm test, two quizzes, assignments, and a comprehensive final examination.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3
    At a glance
    Powered by AI
    This course handout provides details about the Analog and Digital VLSI Design course including objectives, topics, textbooks, course plan, assignments, and evaluation scheme.

    The objective of this course is to provide students an introduction to the fundamentals and practical considerations pertaining to the design of integrated circuits, encompassing both analog and digital integrated circuits. It also acknowledges the importance of CAD tools in the IC system design process.

    Topics that will be covered include introduction to VLSI design methodologies, scaling technology, CMOS technology, design rules, MOS capacitances, advanced current sources and sinks, operational amplifiers, noise quantification, MOS inverters, combinational logic circuits, synchronous systems, sequential circuits design, memory circuits design, and design verification.

    BIRLA INSTITUTE OF TECHNOLOGY & SCIENCE, PILANI –K. K.

    BIRLA GOA CAMPUS


    INSTRUCTION DIVISION
    FIRST SEMESTER 2018-2019
    C OURSE H ANDOUT (PART II)

    August 02, 2018


    In addition to part-I (General Handout for all courses appended to the time-table), this portion gives further specific
    details regarding the course.

    Course No. : EEE F313/INSTR F313


    Course Title : Analog & Digital VLSI Design
    Instructor-in-charge : PRAVIN MANE (pravinmane@goa.bits-pilani.ac.in)
    Team of Instructors : Darshak Bhatt

    1 Scope and Objective of the Course:

    The objective of this course is to provide to the students an introduction to the fundamentals and practical considerations
    pertaining to the design of integrated circuits.The scope encompasses both analog and digital integrated circuits. The
    importance of CAD tools in IC system design process is also acknowledged and stressed upon.

    2 Text Books:

    1. Rabaey J. M., Chandrakasan Anantha, Nikolic Borivoje, “Digital Integrated Circuits : A Design Perspective”, PHI
    Learning Private Limited, 2nd Edition.

    3 Prime Reference Book:

    1. Behzad Razavi,“Design of Analog CMOS Integrated Circuits ”, TATA McGRAW Hill, 2001.

    2. Kang S.M. and Leblebici Y., “CMOS Digital Integrated Circuits: Analysis and Design”, McGraw Hill International
    Editions 3rd Edition 2003.

    4 Other Reference Books:

    1. Neil H.E. Weste, Kamran Eshraghian, “Principles of CMOS VLSI Design”, Addison-Wesley Publishing Company.

    2. Pucknell D.A., Eshraghian K.,“Basic VLSI design, systems and circuits”, Third edition, Prentice Hall of India Pvt.
    Ltd.

    3. Fabricius E.D., “Introduction to VLSI design”, McGraw Hill international editions.

    4. Gregorian R., Temes G.C.,“Analog Mos integrated circuits for signal processing”, Wiley interscience publication.

    5. Sze S.M.,“VLSI Technology”, Second edition, McGraw Hill International Edition.

    6. Randall A Geiger, Phillips E. allen, Noel R Strader, “VLSI Design techniques for analog and digital circuits”,
    McGraw Hill International Edition 1990.

    7. Bhaskhar Jayram, “A VHDL PRIMER”, Prentice Hall.


    8. IEEE Journals of solid state circuits, VLSI system.

    9. Martin. Ken, “Digital Integrated Circuit Design”, Oxford University Press, Inc.

    10. Johns. David A. and Martin K, “Analog Integrated Circuit Design”, John Wily & Sons Inc. 2002.

    5 Course Plan:

    Sr. Topic Learning Objective No.of Lec-


    No. tures
    1. Introduction to VLSI Design Methodo- Introduction to the semiconductor industry 2
    gies
    2. Scaling Technology Generation transition and its effects on 2
    performance
    3. CMOS Technology, Design Rules, Introduction to layouts and industry design flow for 3
    MOS Capacitances analog and digital integrated circuits
    4. Advanced Current Sources & sinks; Building temperature independent voltage and cur- 6
    Current Reference circuit, Operational rent references, Basic building block for most analog
    amplifiers Architectures,feedback subsystems
    5. Noise Quantification of various types of noise in analog cir- 8
    cuits
    6. MOS inverter- Static and switching Basic building block for most digital sub-systems 4
    characteristics,Combinational MOS and Speed of digital systems Study and design of
    logic circuits –static logic various CMOS logic gate families
    7. Synchronous system and Sequential Synchronous design, timing metrics,Design of flip- 5
    circuits design flops
    8. Memory Circuits Design Design of SRAM, DRAM, decoders, sense ampli- 5
    fiers
    9. Design verification & test Verification of functionality,manufacturing defects 4

    6 Evaluation Scheme:

    EC No. Components Duration Marks Date & Time Remarks


    09.10.2018
    1 Midterm Test 90 Minutes 60 Closed Book
    09.00-10.30 AM
    19.09.2018
    2 Quiz-I 20 Minutes 10 Closed Book
    06.00-06.20 PM
    07.11.2018
    2 Quiz-II 20 Minutes 10 Open Book
    06.00-06.20 PM

    3 Assignments 20 Throughout Semester Open Book

    4 Comprehensive Examination 3 Hours 100 03.12.2018 (FN) Open/Closed Book

    Total 200
    7 Assignment/s:

    Regular analog/digital design Assignments covering use Cadence tools for Simulation of VLSI Circuits will be given.

    8 Chamber Consultation Hour:

    To be announced in the class.

    9 Make-up Policy:

    Make up for any component will be given only in genuine cases. In all cases prior intimation must be given to IC.

    10 Notices:

    All notices related to the course will be put on moodle page of course. Also students are requested to check their mails
    on institute Email ID regularly.

    Instruction Incharge
    EEE F313/INSTR F313

    You might also like