Data sheet 6GK5208-0BA00-2AC2

SCALANCE XC208 manageable layer 2 IE Switch; 8x 10/100 Mbit/s

RJ45 ports; 1x console port; Diagnostic LED; Redundant power
supply; Temp. range -40°C to +70 °C Mounting: Standard Mounting
Rail/S7 Profile Rail/Wall Office redundancy functions features (RSTP,
VLAN ,...); PROFINET IO device Ethernet/IP-compliant C-PLUG
shaft;

Product type designation SCALANCE XC208

Transmission rate
Transfer rate 10 Mbit/s, 100 Mbit/s

Interfaces / for communication / integrated

Number of electrical connections
● for network components or terminal equipment 8; RJ45
Number of 10/100 Mbit/s RJ45 ports / Integrated
● with securing collar 8

Interfaces / others
Number of electrical connections
● for operator console 1
● for signaling contact 1
● for power supply 1
● for redundant voltage supply 1
Type of electrical connection
● for operator console RJ11
● for signaling contact 2-pole terminal block
● for power supply 4-pole terminal block

6GK5208-0BA00-2AC2 Subject to change without notice

Page 1/7 04/12/2019 © Copyright Siemens
 design of the removable storage
● C-PLUG Yes

Signal-Inputs/outputs
Operating voltage / of the signaling contacts
● at DC / Rated value 24 V
Operating current / of the signaling contacts
● at DC / maximum 0.1 A

Supply voltage, current consumption, power loss

Type of voltage / of the supply voltage DC
Supply voltage
● external 24 V
● external / minimum 9.6 V
● external / maximum 31.2 V
Supply voltage / 4 / Rated value
● Consumed current / 4 / at rated supply voltage / 0.175 A
maximum
Product component / fusing at power supply input Yes
Fuse protection type / at input for supply voltage 2.5 A / 125 V
Consumed current / maximum 0.35 A
Power loss [W]
● at DC / at 24 V 4.2 W

Permitted ambient conditions

Ambient temperature
● during operation -40 ... +70 °C
● during storage -40 ... +85 °C
● during transport -40 ... +85 °C
Relative humidity
● at 25 °C / without condensation / during 95 %
operation / maximum
Protection class IP IP20

Design, dimensions and weight

Design compact
Width 60 mm
(height) 147 mm
Depth 125 mm
(net weight) 0.52 kg
Material / of the enclosure Polycarbonate (PC-GF10) / pressure die cast aluminum
● Mounting type / 35 mm DIN rail mounting Yes
● Mounting type / wall mounting Yes
● Mounting type / S7-300 rail mounting Yes
● Mounting type / S7-1500 rail mounting Yes

6GK5208-0BA00-2AC2 Subject to change without notice

Page 2/7 04/12/2019 © Copyright Siemens
 Product properties, functions, components / general
Cascading in the case of a redundant ring / at 50
reconfiguration time of <\~0.3\~s
Cascading in cases of star topology any (depending only on signal propagation time)

Product functions / management, configuration

Product function
● CLI Yes
● web-based management Yes
● MIB support Yes
● TRAPs via email Yes
● Configuration with STEP 7 Yes
● RMON Yes
● SMTP server No
● Port mirroring Yes
● multiport mirroring Yes
● CoS Yes
● PROFINET IO diagnosis Yes
PROFINET conformity class B
Product function / switch-managed Yes
Telegram length / for Ethernet / maximum 1632 byte
Protocol / is supported
● Telnet Yes
● HTTP Yes
● HTTPS Yes
● TFTP Yes
● BOOTP No
● GMRP Yes
● DCP Yes
● LLDP Yes
● EtherNet/IP Yes
● SNMP v1 Yes
● SNMP v2 Yes
● SNMP v3 Yes
● IGMP (snooping/querier) Yes
Identification & maintenance function
● I&M0 - device-specific information Yes
● I&M1 – higher-level designation/location Yes
designation

Product functions / Diagnosis

Product function
● Port diagnostics Yes

6GK5208-0BA00-2AC2 Subject to change without notice

Page 3/7 04/12/2019 © Copyright Siemens
 ● Statistics Packet Size Yes
● Statistics packet type Yes
● Error statistics Yes
● SysLog Yes

Product functions / VLAN

Product function
● VLAN - port based Yes
● VLAN - protocol-based No
● VLAN - IP-based No
● VLAN dynamic Yes
Number of VLANs / maximum 257
Number of VLANs - dynamic / maximum 257
Protocol / is supported / GVRP Yes

Product functions / DHCP

Product function
● DHCP client Yes
● DHCP Option 82 Yes
● DHCP Option 66 Yes
● DHCP Option 67 Yes

Product functions / Redundancy

Product function
● of the PROFINET IO device / is supported / Yes
PROFINET system redundancy (S2)
● Ring redundancy Yes
● High Speed Redundancy Protocol (HRP) Yes
● high speed redundancy protocol (HRP) with Yes
redundancy manager
● high speed redundancy protocol (HRP) with Yes
standby redundancy
Protocol / is supported / Media Redundancy Protocol Yes
(MRP)
Product function
● media redundancy protocol (MRP) with Yes
redundancy manager
● redundancy procedure STP Yes
● redundancy procedure RSTP Yes
● redundancy procedure MSTP Yes
● Parallel Redundancy Protocol (PRP)/operation No
in the PRP-network
● Parallel Redundancy Protocol No
(PRP)/Redundant Network Access (RNA)
● Passive listening Yes

6GK5208-0BA00-2AC2 Subject to change without notice

Page 4/7 04/12/2019 © Copyright Siemens
 Protocol / is supported
● LACP Yes

Product functions / Security

Product function
● IEEE 802.1x (radius) Yes
● Broadcast/Multicast/Unicast Limiter Yes
● broadcast blocking Yes
Protocol / is supported
● SSH Yes
● SSL Yes

Product functions / Time

Product function
● SICLOCK support Yes
● NTP-client Yes
● SNTP client Yes
Protocol / is supported
● NTP Yes
● SNTP Yes

Standards, specifications, approvals / CE

Certificate of suitability / CE marking Yes
Product conformity / according to EMC-guideline 2014/30/EU
Standard
● for EMC interference emission EN 61000-6-4, EN 50121-4
● for immunity to EMI EN 61000-6-2, EN 50121-4
Certificate of suitability / RoHS conformity Yes; 2011/65/EU

Standards, specifications, approvals / hazardous environments

Certificate of suitability
● ATEX Yes; EN 60079-0, EN 60079-15
● for ATEX / as marking II 3 G Ex nA II T4 Gc
● for ATEX / as certificate KEMA 07ATEX0145 X
● IECEx Yes; IEC 60079-0, IEC 60079-15
● for IECEx / as marking Ex nA II T4 Gc
● for IECEx / as certificate IECEx DEK 14.0025X
● for cULus HazLoc / as marking CL1, DIV2, Group A,B,C,D T4, CL1, Zone 2, Group IIC, T4
● for cULus HazLoc / as File Nr. E240480 (NWHP, NWHP7)
● FM registration FM class 3600:2011, FM class 3611:2004, FM class 3810:2005,
ANSI/ISA-61010-1:2004
● for FM / as marking CL1, DIV2, group A,B,C,D T4, CL1, Zone 2, group IIC, T4 Ta: -
40 °C +70 °C
● for FM / as certificate FM16US0205X

6GK5208-0BA00-2AC2 Subject to change without notice

Page 5/7 04/12/2019 © Copyright Siemens
 Standards, specifications, approvals / miscellaneous
● Certificate of suitability / Railway application in Yes
accordance with EN 50121-4
● Certificate of suitability / Regulatory Yes
Compliance Mark (RCM)
● Certificate of suitability / for UL 61010-2-201 / E85972 (NRAQ, NRAQ7)
as File Nr.
● Certificate of suitability / for UL 60950-1 / as E115352 (NWGQ, NWGQ7)
File Nr.
● Certificate of suitability / EAC approval Yes

Standards, specifications, approvals / ship classification

Marine classification association
● Korean Register of Shipping (KRS) Yes

Standards, specifications, approvals / product conformity

MTBF 48 y

Accessories
Product extension / optional / C-PLUG Yes

Further Information / Internet Links

Internet-Link
● to website: Selector SIMATIC NET http://www.siemens.com/snst
SELECTION TOOL
● to website: Industrial communication http://www.siemens.com/simatic-net

● to website: Industry Mall https://mall.industry.siemens.com

● to website: Information and Download Center http://www.siemens.com/industry/infocenter

● to website: Image database http://automation.siemens.com/bilddb

● to website: CAx Download Manager http://www.siemens.com/cax

● to website: Industry Online Support https://support.industry.siemens.com

Security information

6GK5208-0BA00-2AC2 Subject to change without notice

Page 6/7 04/12/2019 © Copyright Siemens
 Security information Siemens provides products and solutions with industrial security
functions that support the secure operation of plants, solutions,
machines, equipment and/or networks. They are important
components in a holistic industrial security concept. With this in
mind, Siemens’ products and solutions undergo continuous
development. Siemens recommends strongly that you regularly
check for product updates. For the secure operation of Siemens
products and solutions, it is necessary to take suitable preventive
action(e.g. cell protection concept) and integrate each component
into a holistic, state-of-the-art industrial security concept. Third-
party products that may be in use should also be considered. For
more information about industrial security, visit
http://www.siemens.com/industrialsecurity. To stay informed about
product updates as they occur, sign up for a product-specific
newsletter. For more information, visit
http://support.automation.siemens.com. (V3.4)

last modified: 04/10/2019

6GK5208-0BA00-2AC2 Subject to change without notice

Page 7/7 04/12/2019 © Copyright Siemens