Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

COMPLETE SYLLABUS Mechanical PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 135

H.P.

TECHNICAL UNIVERSITY
HAMIRPUR (H.P.)

Syllabus
[Effective from the Session: 2012-13]
B. Tech. (Mechanical Engineering)
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

B. Tech. (Mechanical Engineering)


Group B

1st Semester- Scheme and Distribution of Marks

Course Subject L T P/ Hours Exam Practical Total


No. D Schedule Schedule
Ext. Int. Int.
NS-101 Engineering Mathematics – I 3 1 0 4 100 50 -- -- 150
NS-102 Engineering Physics-I 3 1 0 4 100 50 -- -- 150

HS-101 Disaster Management and 3 1 0 4 100 50 -- -- 150


Environmental Science
BE-101 Basic Electrical and 3 1 0 4 100 50 -- -- 150
Electronics Engineering
BE-103 Engineering Drawing and 1 0 5 6 100 50 -- -- 150
Graphics
BE-105 Engineering Mechanics 3 1 0 4 100 50 -- -- 150

(Practicals / Drawing / Design)


NS-105 (P) Engineering Physics Lab 0 0 2 2 -- -- 25 25 50

BE-101a (P) Basic Electrical 0 0 2 2 -- -- 25 25 50


Engineering Lab
BE-101b (P) Basic Electronics 0 0 2 2 -- -- 25 25 50
Engineering Lab
WS-101 Workshop Practice-I 0 0 3 3 -- -- 25 25 50

Total 35 600 300 100 100 1100

2nd Semester- Scheme and Distribution of Marks

Course Subject L T P/ Hour Exam Schedule Practical Total


Schedule
No. D s
Ext. Int. Ext. Int.
NS-104 Engineering Mathematics-II 3 1 0 4 100 50 -- -- 150
NS-105 Engineering Physics-II 3 1 0 4 100 50 -- -- 150
NS-103 Engineering Chemistry 3 1 0 4 100 50 -- -- 150
HS-102 Communication & 3 1 0 4 100 50 -- -- 150
Professional Skills in English
BE-102 Basic Mechanical 3 1 0 4 100 50 -- -- 150
Engineering
BE-104 Principles of Computer 3 1 0 4 100 50 -- -- 150
Programming & C++
(Practicals / Drawing / Design)
NS-103 (P) Engineering Chemistry 0 0 2 2 -- -- 25 25 50
Laboratory
HS-102 (P) Communication & 0 0 2 2 -- -- 25 25 50
Professional Skills Lab-I
BE-104 (P) Computer Programming 0 0 2 2 -- -- 25 25 50
Laboratory
WS-102 Workshop Practice-II 0 0 3 3 -- -- 25 25 50

Total 33 600 300 100 100 1100

1
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

3rd Semester – Scheme and Distribution of Marks

Course Subject L T P/D Hours Exam Schedule Practical Total


No. Schedule
Ext. Int. Ext. Int
.
HS-201 Engineering Economics 3 0 0 3 100 50 -- -- 150
NS-206 Engg. Mathematics-III 3 1 0 4 100 50 -- -- 150
ME-211 Strength of Materials -I 4 1 0 5 100 50 -- -- 150
ME-212 Applied Thermodynamics 4 1 0 5 100 50 -- -- 150
ME-213 Machine Drawing 1 0 4 5 100 50 -- -- 150
ME-214 Fluid Mechanics 4 1 0 5 100 50 -- -- 150
(Practicals / Drawing / Design)
ME-211 Strength of Materials 0 0 2 2 -- -- 25 25 50
(P)
ME-214(P) Laboratory
Fluid Mechanics 0 0 2 2 -- -- 25 25 50
Laboratory
ME-213(P) AutoCAD Lab. 0 0 2 2 -- -- 25 25 50

Total 33 600 300 75 75 1050

4th Semester – Scheme and Distribution of Marks

Course Subject L T P/D Hou Exam Schedule Practical Total


No. rs Schedule Int.
Ext. Int. Ext. Ext.
HS-203 Human Values and 2 0 2 4 100 50 -- -- 150
Professional Ethics
NS-207 Numerical Methods for 3 1 0 4 100 50 -- -- 150
Engineers
ME-221 Metrology and 3 1 0 4 100 50 -- -- 150
Interchangeability
ME-222 Manufacturing Technology- 3 1 0 4 100 50 -- -- 150
I
ME-223 Strength of Materials -II 4 1 0 5 100 50 -- -- 150
ME-224 Kinematics of Machines 3 1 0 4 100 50 -- -- 150
(Practicals / Drawing / Design)
HS-222 (P) Oral and Written 0 0 2 2 -- -- 25 25 50
Communication Skills
Lab-II
ME-221(P) Metrology and 0 0 2 2 -- -- 25 25 50
Interchangeability lab.
ME-224(P) Kinematics of Machines 0 0 2 2 -- -- 25 25 50
Laboratory
ECA-201 Extra Curricular Activity 0 0 2 2 -- -- 25 25 50

Total 33 600 300 100 100 1100

Field Visit shall be compulsory to all students of 2nd year once in a year during or after 4th semester.
Community Project of minimum four (4) weeks duration shall be conducted after 4th Semester for
Mechanical Engineering students, and to be evaluated in the 5th Semester.

2
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

5th Semester– Scheme and Distribution of Marks

Course Subject L T P/D Hours Exam Practical Total


No. Schedule Schedule
Ext. Int. Ext. Int.
HS-301 Principles of Management 3 0 2 5 100 50 -- -- 150
and Critical Thinking
ME-311 Fluid Machines 3 1 0 4 100 50 -- -- 150

ME-312 Manufacturing 3 1 0 4 100 50 -- -- 150


Technology-II
ME-313 Heat Transfer 3 1 0 4 100 50 -- -- 150

ME-314 Machine Design-I 4 1 0 5 100 50 -- -- 150

ME-315 Dynamics of Machines 3 1 0 4 100 50 -- -- 150

(Practicals / Drawing / Design)


ME-311(P) Fluid Machines Lab 0 0 2 2 -- -- 25 25 50

ME-312(P) Manufacturing Practice 0 0 2 2 -- -- 25 25 50


lab
ME-313 (P) Heat Transfer lab 0 0 2 2 -- -- 25 25 50

ME-315(P) Dynamics of Machines 0 0 2 2 -- -- 25 25 50


lab
HS-300 Community Project 0 0 0 0 -- -- 25 25 50

Total 34 600 300 125 125 1150

6th Semester – Scheme and Distribution of Marks

Course Subject L T P/D Hrs. Exam Practical Total


No. Schedule Schedule
Ext. Int. Ext.. Int.
**-3** Open Elective 3 0 0 3 100 50 -- -- 150

ME-322 Measurement and Control 3 1 0 4 100 50 -- -- 150

ME-323 Industrial Engg. & 3 1 0 4 100 50 -- -- 150


Production Management
ME-324 Machine Design-II 4 1 0 5 100 50 -- -- 150

ME-325 I.C. Engines 3 1 0 4 100 50 -- -- 150

ME-326 Materials Technology 4 0 0 4 100 50 -- -- 150

(Practicals / Drawing / Design)

ME-322(P) Measurement and 0 0 2 2 -- -- 25 25 50


Control Lab.
ME-325(P) I.C. Engines Lab. 0 0 2 2 -- -- 25 25 50

ME-326(P) Materials Technology 0 0 2 2 -- -- 25 25 50


Lab.
ME-327 Seminar and Group 0 0 2 2 -- -- -- 50 50
Discussion
Total 32 600 300 75 125 1100

3
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

$$ - Industrial Training of 8 weeks duration after 6th Semester

Open Elective to be opted from list below but one which is not offered by his Department

Sr. No. Open Elective Sub. Code


1. Energy Assessment and Auditing EE-300
2. Total Quality Management ME-300
3. Optimization methods for Engineering System NS-300
4. Remote Sensing & GIS CE-300
5. Operating Systems CS-300

7th Semester – Scheme and Distribution of Marks

Course Subject L T P/D Hrs. Exam Practical Total


No. Schedule Schedule
Ext. Int. Ext. Int.

ME-411* Departmental Elective-I 3 0 0 3 100 50 -- -- 150

ME-412 Mechanical Vibrations 3 1 0 4 100 50 -- -- 150

ME-413 Automobile Engineering 4 0 0 4 100 50 -- -- 150

ME-414 Refrigeration and Air 4 1 0 5 100 50 -- -- 150


Conditioning
ME-415 Operations Research 4 1 0 5 100 50 -- -- 150

(Practicals / Drawing / Design)


ME-413(P) Automobile Engineering lab 0 0 2 2 -- -- 25 25 50

ME-414 (P) Refrigeration and Air Cond. lab 0 0 2 2 -- -- 25 25 50

ME-416 Project-I 0 0 6 6 -- -- 100 100 200

ME-417 Industrial Training Viva 0 0 0 0 -- -- 50 50 100


Total 31 500 250 200 200 1150

During winter break there shall be a field visit compulsory to all students of 7th semester, 4th year.

Departmental Elective-I

Sr. No. Departmental Elective-I Subject Code


1. Modern Manufacturing Processes ME-411 (a)
2. Cryogenics ME-411 (b)
3. Maintenance and Reliability ME-411 (c)
4. Robotics ME-411 (d)
5. Total Quality Control ME-411 (e)

4
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

8th Semester– Scheme and Distribution of Marks

Course Subject L T P/D Hrs. Exam Practical Total


No. Schedule Schedul
e
Ext. Int. Ext. Int
ME-421* Departmental Elective-II 3 0 0 3 100 50 -- --. 150

ME-422 Computer Aided Design 4 1 0 5 100 50 -- -- 150


and Manufacturing
ME-423 (CAD/CAM)
Power Plant Engg. 3 1 0 4 100 50 -- -- 150
ME-424 Mechatronics 3 1 0 4 100 50 -- -- 150

(Practicals / Drawing / Design)


ME-422 (P) Computer Aided Design 0 0 2 2 -- -- 25 25 50
(CAD) lab.
ME-425 Project-II 0 0 6 6 -- -- 150 150 300

ME-426 General Proficiency 0 0 0 0 -- -- 100 -- 100

Total 24 400 200 275 175 1050

Note: Marking of General Proficiency to be done at the end of 8th semester, through viva-voce covering all the
subject areas of Under Graduate Mechanical Engineering program.

Departmental Elective-II

Sr. No. Departmental Elective-II Subject Code


1. Material Handling and Plant Layout ME-421 (a)
2. Introduction to Computational Fluid Dynamics ME-421 (b)
3. Industrial Tribology ME-421 (c)
4. Non-Conventional Energy Resources ME-421 (d)
5. Advanced Operations Research ME-421 (e)

5
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Semester-I
ENGINEERING MATHEMATICS-I (NS-101)

Course Code NS-101 L-3, T-1, P-0


Name of the Course Engineering Mathematics-I
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

Instructions
1. The question paper will consist of five sections A, B, C, D and E. Section E will be
Compulsory, it will consist of a single question with 10-20 subparts of short answer type,
which will cover the entire syllabus and will carry 20% of the total marks of the semester end
examination for the course. Section A, B, C and D will have two questions from the respective
sections of the syllabus and each question will carry 20% of the total marks of the semester end
examination for the course.

2. Candidates are required to attempt five questions in all selecting one question from each of the
section A, B, C and D of the question paper and all the subparts of the questions in section E.
Use of non-programmable calculators are allowed.

Section-A
1. MATRICES
Matrices, Related matrices, Complex matrices (Hermitian and skew-Hermitian matrices,
Unitary matrix), Consistency of linear system of equations, Rank of a matrix, Normal form of a matrix,
Vectors, Linear dependence, Consistency of a linear system of equations, System of linear
homogeneous equations, Linear and orthogonal transformations, Characteristic equation, Eigen values,
Eigen vectors, Properties of Eigen values, Cayley-Hamilton theorem, Quadratic forms and its
reduction to canonical form.
Section-B
2. DIFFERENTIAL CALCULUS
Indeterminate forms, Taylor’s and Maclaurin’s series, Partial Differentiation and its
geometrical interpretation, Homogeneous functions, Euler’s theorem and its extension, Total
differentials, Composite function, Jacobian, Maxima and minima of functions of two variables,
Method of undetermined multipliers.
Section-C
3. INTEGRAL CALCULUS
Reduction formulas, Quadrature, Rectification, Surface and Volume of revolution for simple
curves, Double integrals and their applications, Change of order of integration, Change of variables,
Triple integrals and their applications, Change of variable, Beta and Gamma functions and their
relationship.
Section-D
4. COMPLEX NUMBERS
Applications of De Moivre’s theorem, Root of a complex number, Exponential, Circular,
Hyperbolic and Logarithmic functions of a complex variable, Inverse Hyperbolic functions, Real and
imaginary parts of Circular and Hyperbolic functions, Summation of the series-‘C+iS’ method.

6
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Text Books:

1. Advanced Engineering Mathematics: by Erwin Kreyszig, John Wiley and Sons, NC, New York.
2. Advanced Engineering Mathematics: by R. K. Jain & S. R. K Iyengar, Narosa Pub. House.

Reference Books:

1. Advanced Engineering Mathematics: by C. R. Wylie & L. C. Barrett, McGraw Hill


2. Differential & Integral Calculus: by N. Piskunov, MIR Publications.
3. Calculus and Analytic Geometry, by Thomes, G.B, Finney, R.L. Ninth Edition, Peason
Education.
4. Advanced Engineering Mathematics, by Peter. V. O‟ Nil, Wordsworth Publishing Company.
5. Advanced Engineering Mathematics, by Jain, R.K and Lyengar, S.R.K., Narosa Publishing
Company.
6. Higher Engineering Mathematics, by Grewal, B.S., Khanna Publishers, New Delhi.
7. Engineering Mathematics, by Taneja, H.C., Volume-I & Volume-II, I.K. Publisher.

7
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Engineering Physics-I (NS-102)


Course Code NS-102 L-3, T-1, P-0
Name of the Course Engineering Physics – II
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

Instructions

1. For Paper Setters: The question paper will consist of five sections A, B, C, D and E. Section
E will be Compulsory, it will consist of a single question with 10-20 subparts of short answer type,
which will cover the entire syllabus and will carry 20% of the total marks of the semester end
examination for the course. Section A, B, C and D will have two questions from the respective
sections of the syllabus and each question will carry 20% of the total marks of the semester end
examination for the course.

2. For Candidates: Candidates are required to attempt five question in all selecting one question
from each of the section A, B, C and D of the question paper and all the subparts of the questions
in section E. Use of non-programmable calculators is allowed.

Section A

Interference-Coherent Sources, Two Beam Interference by Division of Wavefront- Fresnel Biprism


Interference by Division of Amplitude - Newton’s Rings, Michelson Interferometer.

Diffraction-Fraunhoffer Diffraction, Diffraction through Single Slit, Plane Transmission Grating,


Fresnel Diffraction, Fresnel Half Period Zone, the Zone Plate.

Polarization- Production of Polarized Light, Malus’s Law, Double Refraction, Interference of


polarized Light: Quarter Wave Plate and Half Wave Plate.

Section B

Particle Properties of Waves: Electromagnetic Waves, Maxwell Equations, Blackbody radiations,


Photoelectric Effect, Compton Effect, Pair Production,

Waves Properties of Particles: De Broglie waves, Phase velocity, group velocity and Particle
velocity. Relation between phase velocity and group velocity. Relation between group velocity and
particle velocity. Particle Diffraction, Heisenberg’s uncertainty principle and its physical significance
(no derivation). Application of uncertainty principle (Non-existence of electron in the nucleus).

Section C

Quantum Mechanics: Postulates of quantum mechanics, The Wave Equation. Properties and
Physical significance of a wave function. Probability density and Normalisation of wave function. ,
Schrodinger’s equation: Time- Dependent form, Expectation Values, Operators, Schrodinger’s
equation: Steady-State form Eigen values and Eigen function, Application of Schrödinger wave
equation –Particle in a box, Finite Potential well, Tunnel Effect, Harmonic oscillator.

8
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section D

Nuclear Structure: Composition of nucleus, Nuclear Properties, Stable Nuclei, binding energy,
Liquid Drop Model, Nuclear Forces.

Nuclear Reactions: Cross-section, Nuclear fission, moderators, nuclear reactors, nuclear fusion in
Stars, Fusion Reactors

Elementary Particles: Leptons, Hadrons, Elementary particle quantum numbers, Quarks, Field
Bosons,

Cosmology: The Big Bang Theory, Evolution of Stars.

Text Books:
1. A.Ghatak: Optics,Tata Mcgraw Hill, 3rd Edition.
2. Arthur Beiser, Concepts of Modern Physics ,6th Edition, Tata Mcgraw Hill.

Reference Books:
1. David J Griffith, Introduction to Electrodynamics, Pearson Prentice Hall.
2. Halliday, Resnick and Walker- Principles of Physics, Wiley India 9 th Edition-2012

9
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

DISASTER MANAGEMENT AND ENVIRONMENTAL SCIENCE (HS-101)

Course Code HS-101 L-3, T-1, P-0


Name of the Course Disaster Management and Environmental Science
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

INSTRUCTIONS:
1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type, which
will cover the entire syllabus and will carry 20% of the total marks of the semester end
examination for the course. Section A, B, C & D will have two questions from the respective
sections of the syllabus and each question will carry 20% of the total marks of the semester end
examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the questions in
Section E. Use of non-programmable calculators is allowed.
Section-A
Principles of Disaster Management. Natural Disasters such as Earthquake, Floods, Fire, Landslides,
Tornedo, Cyclones, Tsunamis, Nuclear, Chemical, Terrorism, Extra Terrestrial and other natural
calamities. Hazards, Risks and Vulnerabilities. Assessment of Disaster Vulnerability of a location and
vulnerable groups, National policy on disaster Management,
Section-B
Prevention, Preparedness and Mitigation measures for various Disasters, Post Disaster Relief &
Logistics Management, Emergency Support Functions and their coordination mechanism, Resource &
Material Management, Management of Relief Camp, Information systems & decision making tools,
Voluntary Agencies & Community Participation at various stages of disaster, management, Integration
of Rural Development Programmes with disaster reduction and mitigation activities.
Section-C
Renewable and non-renewable resources, Role of individual in conservation of natural resources for
sustainable life styles.Use and over exploitation of Forest resources, Deforestation, Timber extraction,
Mining, Dams and their effects on forest and tribal people. Use and over exploitation of surface and
ground water resources, Floods, Drought, Conflicts over water, Dams- benefits and problems. Causes,
effects and control measures of Air pollution, Water pollution, soil pollution, Noise pollution, Thermal
pollution, Nuclear hazards.
Section-D
Global Environmental crisis, Current global environment issues,Global Warming, Greenhouse Effect,
role of Carbon Dioxide and Methane, Ozone Problem, CFC’s and Alternatives, Causes of Climate
Change Energy Use:past, present and future, Role of Engineers.
Text Books:
1. Disaster Management By G.K. Ghosh A.P.H. Publishing Corporation
2. Environmental Studies, R Rajgopalan, Oxford University Press
Reference Books:
1. Modern Encyclopaedia of Disaster and Hazard Management By B C Bose Rajat publications.
2. Disaster Management By R.B. Singh Rawat Publications.
3. Disaster Management By B Narayan A.P.H. Publishing Corporation.
4. Environmental Studies, Daniels, Wiley Publication
5. Environmental Studies, Basak, Pearson Publication

10
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Basic Electrical & Electronics Engineering (BE-101)

Course Code BE-101 L-3, T-1, P-0


Name of the Course Basic Electrical & Electronics Engineering
Lectures to be delivered 52 (1 Hr Each) (L = 39, P = 13 for each semester)
Semester End Examination Max. Time = 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Continuous Assessment (based on sessional tests (2) 50%, Max. Marks: 50
Tutorials/Assignments 30%, Quiz/Seminar 10%, Attendance 10%)

Instructions

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type, which
willcover the entire syllabus and will carry 20% of the total marks of the semester end examination for
the course. Section A, B, C & D will have two questions from the respective sections of the syllabus
andeach question will carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question from
each of the sections A, B, C & D of the question paper and all the subparts of the questions in Section
E. Use of non-programmable calculators is allowed.

SECTION A

DC circuits: Ohm’s law, resistance, receptivity, series & parallel connections, star delta
transformation, power dissipation in resistance, effect of temperature on resistance. Kirchhoff’s laws
Mesh laws; Mesh & Nodal analysis.

AC circuits: Generation of alternating voltage &currents, Sinusoidal signals, instantaneous and peak
values, R.M.S. &Average value, phase angle, polar and rectangular, exponential and trigonometric
representations of RL and C components,

ElectricalInstruments and Devices: Voltmeter, Ammeter, Wattmeter, Energy meter, Inverters.


Introduction to Domestic Electric Wiring

SECTION – B

Series and Parallel Circuits: A.C.Through resistance; inductance & capacitance. R-L; R-C & R-L-C
series & parallel circuits, phasor diagrams. Power & power factor, series & parallel resonance.
Problems by analytical as well as physical methods.

Three phase circuits: Three phase voltage & current generation, star & delta connections (balanced
load), relationship between phase &line currents and voltages, phasor diagrams, measurement of
power by two wattmeter methods.

A.C. And D.C. Machines: Principle, construction and working of transformer. Introduction to D.C
and A.C. machines.

SECTION – C

Semiconductor Devices & Circuit: Classification of material; Energy band structure of conductors,
insulators & semiconductor ;Classification of Semiconductor Mobility and conductivity, Intrinsic and
extrinsic semiconductors and charge densities in semiconductors, current components
insemiconductors, continuity equation. ; PN junction Characteristics& Analysis ;diode rating ; Types

11
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

of diodes – Zener diodes, Photodiodes, Light emitting diodes (LED’s), Varactor diodes and tunnel
diodes. Rectifiers and filter circuit: Half wave, full wave and Bridge rectifier circuits and their
analysis, L, C and Pi filters, Basic regulator supply using zener diode.

Transistors: Construction and characteristics of bipolar junction, transistors (BJT’s)-Comm. Base,


Comm. emitter, Comm. Collector configuration.

SECTION – D

Field Effect Transistor: Construction and characteristics of JFET.MOSFET construction and


characteristics.

Integrated Circuits: Classification of ICs; Monolithic ICs; OP Amp: Characterstics of Ideal


OPAmp& application

Electronic Instruments: Role and importance of general purpose test Instruments, Electronic
Millimeter, Cathode Ray Oscilloscope, Measurement of amplitude, Frequency and phase using CRO.

Text Books:

1. Basic Electrical & Electronics Engineering – V Jegathesan , K Vinoth Kumar & R Saravanakumar
2. Basic Electrical & Electronics Engineering- B.L.Thereja

Reference Books:

1. Electronics devices and circuit theory by Robert Boylestad.


2. Electronics Devices and circuits by Millman&Halkias, TMH.
3. Basic Electronics by Debashis De, Pearson Education, 2010.
4. Electronics devices and circuit by Bhargava and Kulshtreshta, TTTI Series

12
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

ENGINEERING DRAWING AND GRAPHICS (BE-103)


Course Code BE-103 L-1, T-0, P-5
Name of the Course Engineering Drawing and Graphics
Lectures to be delivered 78 (1 Hr Each) (L = 13, P = 65 for each semester)
Semester End Examination Max. Time = 3 hrs. Max.Marks: 100 Min. Pass Marks: 40
Continuous Assessment (based on sessional tests (2) 50%, Max. Marks: 50
Tutorials/Assignments 30%, Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:
1. For Institutes: There will be two sessions per week. 1st session will consist of one lecture and two
hours of practice session. 2 nd session will consist of three hours of practice session.
2. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type, which
will cover the entire syllabus and will carry 20% of the total marks of the semester end
examination for the course. Section A, B, C & D will have two questions from the respective
sections of the syllabus and each question will carry 20% of the total marks of the semester end
examination for the course.
3. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the questions in
Section E. Use of non-programmable calculators is allowed.
Section-A

Drawing Techniques and Scales: Various type of lines, principal of dimensioning, size and location
as per IS code of practice (SP-46) for general Engg. Drawing. Practice of drawing, various types of
lines and dimensioning exercises. Drawing exercises pertaining to symbols.Conventions and Exercise
of lettering techniques.Free hand printing of letters and numerals in 3, 5, 8 and 12 mm sizes, vertical
and inclined at 75 degree.Instrumental lettering in single stroke.Linear scale, Diagonal scale &vernier
scale.
Points, Lines and Planes: Projection of Points, Lines and Planes: Concept of horizontal and vertical
planes. First and third angle projections: projections of point and lines, true length of lines and their
horizontal and vertical traces, projection of planes and their traces. Auxiliary planes.
Section-B
Projections of Solids: Right regular solids of revolution and polyhedrons etc. and their auxiliary
views.

Sectioning of Solids: Principal of sanctioning, types of sanctioning and their practice on projection of
solids, sectioning by auxiliary planes.
Section-C
Development of Surfaces: Development of surfaces of cylinders, cones, pyramid, prism etc. exercises
involving development of unique surfaces like Y-piece, hopper, tray, truncated pieces etc.
Intersection of Surfaces: Intersection of cylinders, cones and prisms with their axes being vertical,
horizontal or inclines. Exercise on intersection of solids-cylinder and cylinder, cylinder and cone,
prism and prism.
Section-D
Isometric Projection: Concept of isometric views: isometric scale and exercise on isometric views.
Practice of Orthographic projections.
Simple Trusses: Graphical Method.
Text Books:
1. Engineering Drawing &Engg. Graphics byP. S. Gill, Kataria and Sons Millennium Edition.
2. Engineering Drawing Plane and Solid Geometry byN.D. Bhatt and V. M. Panchal, 44th Edition,
2002, Charotar Publishing House.
Reference Books:
1. Engineering Drawingby Dhananjay A. Jolhe, Tata McGraw Hill.

13
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

ENGINEERING MECHANICS (BE-105)

Course Code BE – 105 L-3, T-1, P-0


Name of the Course Engineering Mechanics
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13, P=0 for each semester)
Semester End Examination Max. Time = 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Continuous Assessment (based on sessional tests (2) 50%, Max. Marks: 50
Tutorials/Assignments 30%, Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:
1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type, which
will cover the entire syllabus and will carry 20% of the total marks of the semester end
examination for the course. Section A, B, C & D will have two questions from the respective
sections of the syllabus, and each question will carry 20% of the total marks of the semester end
examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the questions in
Section E. Use of non-programmable calculators is allowed.

Section-A

Force, Moment, Center of gravity & Moment of Inertia: Idealization of Mechanics, Concept of
Rigid Body and Elastic Body, Laws of Mechanics, Forces & System of Forces, Composition,
Resolution & resultant of Forces, Laws of Forces, Lami’s Theorem, Moment & Couples, Varignon’s
Theorem, Free Body Diagram, Centre of Gravity of a Lamina, Centroids of various Geometric Shapes,
Moment of Inertia, Radius of Gyration, Parallel and Perpendicular Axis Theorem.

Frames and Trusses: Introduction, Perfect Frame, Redundant Frame, Reactions of Supports, Plane
Trusses, Space Trusses, Method of Joints, Method of Section, Graphical Method- Maxwell Diagram.

Section-B

Simple Stresses and Strains: Stress & strain; Types of stresses and strains Elastic limit; Hooks law;
Stress – strain diagram for ductile and brittle material, Factor of safety; Poisson’s ratio; Elastic
constants; Young’s modulus, Shear modulus & Bulk modulus. Relationship between elastic constants.
Thermal Stress & Strain.

Shear Force and Bending Moment: Introduction, concept of shear force and bending moment, Sign
conventions, Types of load – concentrated, uniformly distributed, uniformly varying, Types of beams:
Cantilever beam, simply supported beam, overhanging beam; Shear force and bending moment
diagrams for the above beams subjected to different loadings and couples. Point of contra flexure,
Relationship between load, Shear force and bending moment.

Section-C

Bending Stresses in Beams: Bending Stresses in Beams with derivation of Bending equation and its
application to beams of circular, rectangular I & T Section, Composite beams.

Shearing Stresses in Beams: Shearing stress at a section in a loaded beam, Shear stress distribution
over different sections.

14
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-D

Torsion of Circular Shaft: Pure Torsion, Theory of Pure torsion, Derivation of Torsion equation for a
circular shaft subject to torsion, assumptions, Maximum torque transmitted by a Solid shaft and hollow
shaft derivations, Polar modulus, torsion rigidity, Comparison of hollow and solid shaft, Power
transmitted by a shaft, Close coiled helical spring subjected to axial load and torque.

Introduction to Friction: Definition, Principles of friction, Friction between solid bodies, Coefficient
of friction, Kinetic friction force, Definition & Determination of angle of friction, Laws of friction ,
Procedure for friction analysis, Equilibrium of rigid bodies subjected to frictional force of resistance,
Friction at the ends of ladder, Wedge friction, Remedial measures in overcoming friction.

Text Books:
1. Engineering Mechanics: Nelson, McGraw Hill
2. Engineering Mechanics: Statics, Meriam, JohnWiley

Reference Books:
1. Mechanics of Materials-E.J. Hearn, Elsevier
2. Engineering Mechanics-Bhavikatti, New Age International
3. Engineering Mechanics- JagatBabu, Pearson
4. Engineering Mechanics, P.N. Chandramouli, PHI Learning Private Limited.
5. Engineering Mechanics, V. Jayakumar & M. Kumar, PHI Learning Private Limited.

15
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Engineering Physics Lab (NS-105(P))

Course Code NS-105(P) L-0, T-0, P-2


Name of the Course Engineering Physics Lab
Lectures to be Delivered 26 hours of Lab. work (2 hrs. per week)
Semester End Max Marks: 25 Min Pass Marks: 10 Maximum Time: 3 hrs
Examination
Continuous Assessment Lab work 30%, Lab Record 25% Max Marks:
Viva/ Hands on 25%, Attendance 20% 25

Instructions for paper setter / candidates


Laboratory examination will consist of two parts:
Performing a practical exercises assigned by the examiner.
Viva-voce examination

Viva-voce examination will be related to the practicals performed / project executed by the candidate
related to the paper during the course of the semester.

List of Experiments

1. To find the refractive index of a prism by using spectrometer.


2. To find the wavelength of sodium light by Newton’s rings experiment.
3. To find the wavelength of sodium light by Michelson interferometer.
4. To study the laser beam characteristics like, wavelength using diffraction grating aperture &
divergence.
5. To study the variation of magnetic field with distance and to find the radius of coil by Stewart and
Gee’s apparatus.
6. To find the value of e/m for electrons by helical method.
7. To compare the capacitances of two capacitors by De’sauty Bridge.
8. To find the value of Planck’s constant by using a photoelectric cell.
9. To calculate the hysteresis loss by tracing a B-H curve for a given sample
10. To determine the Hall co-efficient
11. To determine the band gap of an intrinsic semiconductor by four probe method.
12. To find the velocity of ultrasound in liquid.
13. To find out polarizability of a dielectric substance.
14. To determine the numerical Aperture of an optical fibre.
15. To determine the attenuation & propagation losses in optical fibres.

Note: Each student is required to perform at least ten experiments.

Books:
1. Practical Physics-S.L.Gupta&V.Kumar.
2. Advanced Practical Physics Vol. I & II – S.P. Singh

16
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

BASIC ELECTRICAL ENGINEERING LAB (BE– 101a (P))

Course Code BE– 101a(P) L-0, T-0, P-2


Name of the Course Basic Electrical Engineering Lab
Lectures to be Delivered 26 hours of Lab. work (2 hrs. per week)
Semester End Max Marks: 25 Min Pass Marks: 10 Maximum Time: 3 hrs
Examination
Continuous Assessment Lab work30%, Lab Record 25% Max Marks: 25
Viva/ Hands on 25%, Attendance
20%

Instructions for Paper setter/ Candidates

Laboratory examination will consist of two parts:


1. Performing a practical examination assigned by the examiner
2. Viva-voce examination
Viva-voce examination will be related to the practical’s performed/projects executed by the candidate
related to the paper during the course of the semester.

LIST OF EXPERIMENTS

1. To verify KCL and KVL.


2. To study various types of Electrical Meters.
3. To perform open circuit and short circuit test of Transformer.
4. Measurement of power by Three Voltmeter/Three Ammeter method.
5. Measurement of power in 3-phase system by two wattmeter method.
6. To perform direct load test of transformer and plot efficiency v/s load characteristics.
7. To perform direct load test of the DC shunt generator and plot load v/s current curve.
8. To study frequency response of series RLC circuit and determine resonance frequency and Q
factor for various values of R, L, C.
9. To study frequency response of parallel RLC circuit and determine resonance frequency and Q
factor for various values of R, L, C.

Note: All the practicals of Electrical should also be performed on breadboard.

17
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

BASIC ELECTRONICS ENGINEERING LAB (BE– 101b (P)

Course Code BE– 101b(P) L-0, T-0, P-2


Name of the Course Basic Electronics Engineering Lab.
Lectures to be Delivered 26 hours of Lab. work (2 hrs. per week)
Semester End Max Marks: 25 Min Pass Marks: 10 Maximum Time: 3 hrs
Examination
Continuous Assessment Lab work 30%, Lab Record 25% Max Marks: 25
Viva/ Hands on 25% Attendance
20%

Instructions for Paper setter/ Candidates


Laboratory examination will consist of two parts:
1. Performing a practical examination assigned by the examiner
2. Viva-voce examination
Viva-voce examination will be related to the practicals performed/projects executed by the candidate
related to the paper during the course of the semester.

LIST OF EXPERIMENTS

1. Familiarization with electronic components, and general purpose Laboratory equipment.


2. Use of CRO and function generator and calculation of amplitude, frequency, time period of
different types of ac signals.
3. Verification of Junction Diode and Zener Diode characteristic and determination of static and
dynamic resistance at the operating point
4. Verification of input and output characteristics of a Bipolar Junction Transistor and
determination of the operating point on load line.
5. Verification of input and output characteristics of a Field Effect Transistor and determination of
the operating point on load line.
6. Verification of Series and Parallel Resonance theory.
7. Operation of diode as different form of rectifier and effect of different types of passive filters on
the output.
8. Determination of frequency response of a RC coupled amplifier and determination of bandwidth
and signal handling capacity.
9. Use of OP-AMP as an inverting and non-inverting amplifier for different gains.
10. Verification of Uni-junction Transistor characteristics and relaxation oscillator
11. Rectifiers- Half wave , Full wave & Bridge rectifiers

Note: All the practical should be performed on breadboard.

18
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

WORKSHOP PRACTICE-I (WS-101)


Course Code WS– 101 L-0, T-0, P-3
Name of the Course Workshop Practice –I
Lectures to be delivered 39 hours of Lab sessions in each semester
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10
Continuous Lab work 30%, Lab record 25%, Max. Marks: 25
Assessment Viva 25%, Attendance 20%

INSTRUCTIONS:

Laboratory examination will consist of two parts:


(i) Performing a practical exercises assigned by the examiner .
(ii) Viva-voce examination
Viva-voce examination will be related to the practicals performed / project executed by the candidate
related to the paper during the course of the semester.

List of Experiments: -

Fitting Shop: -
Introduction to the tools used in Fitting Shop and various processes in Fitting shop.
1. To make a square piece of mild steel.
2. To make V-matching joint of mild steel.
3. To make a V-notch.

Machine Shop: -
Introduction to various machine tools and machine parts, such as Lathes, drilling machine, grinders
etc.Cutting tools and operations.
1. Facing and turning on mild steel rod on Lathe Machine.
2. To make a groove on lathe machine.
3. Taper turning operation on Lathe Machine.

Carpentry and Pattern making Shop: -


Carpentry and Pattern Making Various types of timber and practice boards, defects in timber,seasoning
of wood, tools, operations and joints. Introduction to the tools used in carpentry shop.
1. To make the ‘T’ lap joint.
2. To make ‘T’ Dove-tail joint.
3. To make Mortise &Tennon joint.

Welding Shop: -
Introduction to different welding methods, welding equipment, electrodes, welding joints, awareness
of welding defects.

1. To make a lap joint.


2. To make a T joint.
3. To make a V-butt joint.

Smithy and Forging: -


Introduction to forging tools, equipments, and operations, Forgability of metals.
1. To make a ring of mild steel by cold forging process.
2. To make S-hook by hot forging process.
3. To make chisel by hot forging process.

19
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Foundry Shop: -
Introduction to moulding materials, moulds, use of cores, melting furnaces, tools and equipment used
in Foundry.
1. Make a single piece pattern mould.
2. To make spilt pattern mould.
3. To make mould and core and assemble it.

Electrical and Electronics Shop: -


Demonstration of tools, Introduction to electric wiring, Exercises preparation of PCBs, involving
soldering of electrical & electronic application.
1. Fault rectification, disassembly and assembly of (any two) electrical appliances viz. electric iron,
electric mixer, ceiling and table fan, tube light, blower and water heater.
2. Demonstration and use of flowing electronic instruments: multimeter, voltmeter, ammeter, energy
meter, CRO.

Books:

1. Workshop Technology by Chapman.


2. Manufacturing Processes by Begman.
3. Manufacturing Materials and processes by JS Campbell.
4. Workshop Practice-I, Mechanical Workshop Practice, 2 nd Edition by John, PHI Learning Private
Limited.

20
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Semester- II
Engineering Mathematics-II (NS-104)

Course Code NS-104 L-3, T-1, P-0


Name of the Course Engineering Mathematics – II
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

Instructions
1. The question paper will consist of five sections A, B, C, D and E. Section E will be
Compulsory, it will consist of a single question with 10-20 subparts of short answer type,
which will cover the entire syllabus and will carry 20% of the total marks of the semester end
examination for the course. Section A, B, C and D will have two questions from the respective
sections of the syllabus and each question will carry 20% of the total marks of the semester end
examination for the course.
2. Candidates are required to attempt five questions in all selecting one question from each of the
section A, B, C and D of the question paper and all the subparts of the questions in section E.
Use of non-programmable calculators are allowed.

Section-A
INFINITE SERIES: Convergence and divergence of infinite series, Geometric series test, Positive
term series, p-series test, [Comparison test, D’Alembert’s ratio test, Cauchy’s root test (Radical test),
Integral test, Raabe’s test, Logarithmic test, Gauss’s test (without proofs), Alternating series and
Leibnitz’s rule, Power series, Radius and interval of convergence, absolute convergence and
Conditional convergence.

Section-B
FOURIER SERIES: Euler’s formula, Conditions for a Fourier expansion, Dirichlet’s conditions,
Functions having points of discontinuity, Change of interval, Odd and even periodic functions,
Expansion of odd and even periodic functions, Half-range series, Typical wave-forms, Parseval’s
formula.

Section-C
LINEAR DIFFERENTIAL EQUATIONS: Brief review of first order ordinary differential
equations, Exact equations, Equations reducible to exact equations, Equations of the first order and
higher degree, Clairaut’s equation, Linear differential equations with constant co-efficients,
Complimentary functions and particular integral, Method of variation of parameters, Equations
reducible to linear equations with constant co-efficients (Cauchy’s and Legendre’s linear equations).

Section-D
VECTOR CALCULUS: Curves in space, curvature and torsion, Scalar and vector point functions,
Differentiation of vectors, Vector operator Del, gradient, divergence and curl with their physical
interpretations, Formulae involving gradient, divergence and curl, Line, surface and volume integrals,
Green’s Theorems, Stokes and Gauss Theorems and their verifications and applications. Scalar
potential, solenoidal and irrotational fields.

21
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Text Books:
1. Advanced Engineering Mathematics by Erwin Kreyszig, John Wiley and Sons, N.C., New
York.
2. Advanced Engineering Mathematics by R. K. Jain & S. R. K Iyengar, Narosa Publishing
House.

Reference Books:
1. Advanced Engineering Mathematics: by C. R. Wylie & L. C. Barrett, McGraw Hill
2. Higher Engineering Mathematics byB S Grewal,Khanna Publishers, New Delhi.
3. Differential & Integral Calculus: by N. Piskunov, MIR Publications.
4. Calculus and Analytic Geometry by Thomes, G.B, Finney, R.L. Ninth Edition, Pearson
Education.
5. Advanced Engineering Mathematics byPeter. V. ONil, Wordsworth Publishing Company.
6. Vector Calculus by C. E. Weatherburn. John Wiley and Sons, NC, New York.
7. Differential Equations by Shepley L. Ross, John Wiley & Sons, New York.

22
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Engineering Physics– II (NS – 105)


Course Code NS-105 L-3, T-1, P-0
Name of the Course Engineering Physics – II
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

Instructions
1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section E will be compulsory, it will consist of a single question with 10-20 subparts of
short answer type, which will cover the entire syllabus and will carry 20% of the total
marks of the semester end examination for the course. Section A, B, C & D will have two
questions from the respective sections of the syllabus and each question will carry 20% of
the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.

SECTION – A
Crystal Structure: Space lattice, Bravais lattice - unit cell, primitive cell. Lattice parameters. Crystal
systems. Direction and planes in a crystal.Miller indices. Expression for inter-planar spacing.Co-
ordination number. Atomic packing factor. Bragg’s Law.Determination of crystal structure by Bragg’s
x-ray spectrometer. Crystal structures of NaCl, and diamond.

Free electron theory: Elements of classical free electron theory and its limitations. Quantum theory of
free electrons, Fermi level, density of states, fermidirac distribution function, Thermionic emission,
Richardson’s equation.
(10 Lectures) & (Text Book-1)
SECTION – B
Band Theory of Solids: Origin of energy bands, Periodic Potential in a crystal, Wave function in a
periodic potential, kronig, Penney Model (qualitative), E-K diagrams, Brillouin Zones, Effective mass
of electron, Concept of negative effective mass and holes, Classification into metals, semiconductors
and insulators, fermi energy and its variation with temperature.
(9 Lectures) & (Text Book-1)
SECTION – C
Dielectric and Magnetic Properties of Materials: Dielectric polarization, dielectric constant, types
of polarization, electric field, electric displacement and dielectric polarization vector & relation
between them, Gauss;s law in the presence of dielectric, Behavior of dielectric in alternating field-
simple concepts, Atomic Magnetic Moments, Classification of magnetic materials, Dia, para, and
ferromagnetic materials, domains, B-H graph in ferromagnetic materials Anti-ferromagnetism
&ferrimagnetisms, . Soft and Hard magnetic materials. Ferrite and their applications.

23
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Superconductivity: Temperature dependence of resistivity in superconducting materials. Effect of


magnetic field (Meissner effect). Type I and Type II superconductors. BCS theory (qualitative), High
temperature superconductors, Applications of superconductivity.
(12 Lectures) & (Text Book-1)
SECTION – D
Lasers: Spontaneous and stimulated emission, Einstein’s Coefficients, Characteristics of Laser beam,
Population inversion, Pumping Techniques, Components of a laser system, Ruby Laser and He-Ne
Lasers

Fiber Optics: Basics of fiber optics, Total Internal Reflection, Acceptance angle, Numerical aperture,
Single mode & Multimode fibres, Step index and Graded index fiber, pulse Dispersion in optical
fibres, Attenuation in Optical Fibres, applications of optical fibres.
(8 Lectures) & (Text Book-2)

Text Books:

1. Rajnikant: Applied Solid State Physics, Wiley India Pvt. Ltd.


2. A.Ghatak: Optics,Tata Mcgraw Hill, 3rd edition.

Reference Books:

1. Charles Kittel: Introduction to Solid State Physics, John Wiley & sons Inc.
2. S.O.Kasap, Principle of Electronic materials and Devices.

24
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

ENGINEERING CHEMISTRY (NS – 103)


Course Code NS-103 L-3, T-1, P-0
Name of the Course Engineering Chemistry
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

Instructions

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type, which
will cover the entire syllabus and will carry 20% of the total marks of the semester end
examination for the course. Section A, B, C & D will have two questions from the respective
sections of the syllabus and each question will carry 20% of the total marks of the semester end
examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the questions
in Section E.

SECTION –A

Electrochemistry: Electrical Conductance, Types of Electrolyte, Specific Conductance, Equivalent


Conductance, Molar Conductance, Ionic Conductance (Kohlrausch Law), Factors Affecting
Conductance, Transport Number, Interionic Attraction Theory of Conductance, Hydration of ions,
Electrochemical Cell ,Electrode Potential, Standard Electrode Potential, Galvanic Cells, EMF of the
Cell & Free Energy Change, Nernst Equation, Reference Electrodes (S.H.E,Calomel Electrode, Silver-
Silver Electrode, Single, Eletrochemical Series, Glass Electrode, Concentration Cell, types &
applications of Concentration Cell, Batteries(primary cell , Secondary storage cell, Metal- Air
Batteries), Fuel cell, hydrogen-oxygen fuel cell.

Phase Rule: Introduction, One Component System (water system, sulpher system) Two components
System (lead-silver & Zinc- magnesium system), thermal Analysis, (13 Lect)

SECTION – B
Water Treatment: Introduction, Sources of water, Impurities, Hardness Analysis, Oxidations, (BOD
& COD), Boiler Corrosion Sewage & Treatment.

Corrosion and its Controls: Introduction, Types of corrosions, Electrochemical Theory, Pitting,
Water Line, Differential Aerations corrosions, Stress Corrosions, Factors affecting Corrosions,
Preventive measures. (10Lect)

SECTION – C
Instrumental Methods of Analysis
Introduction to spectroscopy; UV-Visible spectroscopy- Absorption laws ,Instrumentation, formation
of absorption bands, Theory of electronic spectroscopy, Chromophore and auxochrome concept,
fluorescence & phosphorescence, application of UV-Visible spectroscopy ; IR spectroscopy-
Principle, theory of molecular vibrations, important features of IR spectroscopy and applications;

25
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

NMR-Principle, relaxation processes, Instrumentation, shielding-desheilding effects, spin coupling,


coupling constant, applications of NMR;

Fuel and Combustion: Introduction, class of fuels ( Solid, Liquid and Gases) Coal and its origin,
Analysis of Coals, Petroleum fuels, Cracking, Octane no, Cetane no, Gaseseous fuel, Water Gas,
producer gas ( 9 Lect)

SECTION – D
Polymers Classification of polymers, types of polymerizations, plastics, some important commercial
thermoplastics (polythene, polypropylene, polystyrene, polyvinylchloride, Teflon, plexiglass,
polyurethanes), thermosetting (Bakelite, epoxy resin, Urea formaldehyde) Elastomers, synthetic
rubbers, fiber.

Composite Materials
Introduction, Classification, constituents of composites, Fiber reinforced composites, unidirectional
fibre reinforced composites, short fibre reinforced composites, particle reinforced composites,
important types and failures of fiber reinforced composites, Advantages and applications of
composites. (10Lect)

Text Books:

1. Engineering Chemistry by Dr Ramesh Thakur and Dr.Subba Ramesh, Wiley India publisher
2. A Text Book of Engineering Chemistry by ShashiChawla, DhanpatRai& Sons.

Reference Books:

1. Engineering Chemistry by P C Jain & Monika Jain


2. Fundamental of organic spectroscopy by Y. R. Sharma
3. Spectroscopic methods by Williams and Fleming

26
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Communication & Professional Skills in English (HS-102)

Course Code HS-102 L-3, T-1, P-0


Name of the Course Communication & Professional Skills in English
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Examination
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

Instructions
1. For Paper Setters: The question paper will consist of five sections A, B, C, D and E. Section E
will be Compulsory, it will consist of a single question with 10-20 subparts of short answer type,
which will cover the entire syllabus and will carry 20% of the total marks of the semester end
examination for the course. Section A, B, C and D will have two questions from the respective
sections of the syllabus and each question will carry 20% of the total marks of the semester end
examination for the course.
2. For Candidates: Candidates are required to attempt five question in all selecting one question
from each of the section A, B, C and D of the question paper and all the subparts of the questions
in section E.

Section A
Essentials of communication:
The process of communication: communication competence, types and channels of communication,
Importance of listening skills in communication: types of listening, barriers to listening, Barriers to
communication and removal of these barriers, personal SWOT Analysis, Analyzing audience, role of
emotions and body language in communication, non-verbal communication.

Section B
Written communication:
Enriching vocabulary, using vocabulary in different context, Essentials of strong writing skills, language
and style of writing, characteristics of a good technical style, logical reasoning, Paragraph writing,
Developing perspective: goals, objectives and principles of critical thinking.

Section C
Reading Comprehension:
Importance of reading: Eye movement, fixations, regression, visual wandering, right approach to
reading, SQ3R method of reading, Precis writing, Comprehension, Essay writing.

Section D
Technical Communication:
Report writing: Importance, structure, drafting of reports, Business Writing: Sales letters, claim and
adjustment letters, inviting/sending quotations, Tenders, Memorandum, Job Application letter, Preparing
a personal resume, notices, agenda and minutes of meeting.

27
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Text Books:
1. An Introduction to Professional English and Soft Skills: by Bikram K. Das, Kalyani Samantray,
Cambridge Press.
2. Business correspondence and Report Writing: by R. C. Sharma & Krishna Mohan

Reference Books:
1. Communication Skills, Sanjay Kumar and PushpLata, Oxford University Press.
2. Chrissie Wright (Ed.); Handbook of Practical Communication Skills; JAICO Books
3. Effective Communication and soft Skills, Nitin Bhatnagar and Mamta Bhatnagar, Pearson
Publication.
4. Communicative English for Engineers and professionals, Nitin Bhatnagar and Mamta Bhatnagar,
Pearson Publication.
5. Communication Skills and soft skills- An integrated approach, Kumar, Pearson Publication
6. Communication Skills for Engineers, Mishra, Pearson Publication
7. K.K.Sinha, Business Communication, Galgotia Publishing Company, New Delhi, 1999.
8. R.K.Bansal& J.B. Harrison, spoken English for India, Orient Longman.

Recommended Readings:
1. Business @ The Speed of thought, Bill Gates.
2. My Experiments with Truth, M.K.Ghandhi
3. Wings of Fire, A.P.J. Kalam
4. An Autobiography, JwaharLal Nehru.

28
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

BASIC MECHANICAL ENGINEERING (BE-102)

Course Code BE-102 L-3, T-1, P-0


Name of the Course Basic Mechanical Engineering
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Examination Max. Time = 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Continuous Assessment (based on sessional tests (2) 50%, Max. Marks: 50
Tutorials/Assignments 30%, Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type, which
will cover the entire syllabus and will carry 20% of the total marks of the semester end
examination for the course. Section A, B, C & D will have two questions from the respective
sections of the syllabus, and each question will carry 20% of the total marks of the semester end
examination for the course.

Note: The paper setter will be required to mention a note in the question paper that use of steam
table, graphical plots are permitted.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the questions in
Section E. Use of non-programmable calculators is allowed.

Section-A
Basic concept: Dimensions and units, thermodynamic systems, thermodynamic properties and
process, thermodynamic equilibrium, energy-kinetic, potential and internal, heat and work, zeroth law,
concept of temperature, definition of ideal gas, laws and properties of ideal gas.
First law of Thermodynamics: First law for control mass (closed system), internal energy as a
property, enthalpy, specific heats, non-flow processes of ideal gases, cyclic process, first law for
control volume (open system), applications of steady flow energy equation to engineering devices.

Section-B
Second law of Thermodynamics: Limitations of first law of thermodynamics, Kelvin- Planck and
Clausius statements, their equivalence, application of statements of second law to heat engine, heat
pump and refrigerator, reversible processes, reversible cycles, and carnot cycle, corollaries of the
second law, thermodynamics temperature scale, Clausius inequality, entropy, principle of increase of
entropy, availability and irreversibility.
Properties of Steam: Phase transformation, phase diagram, condition of steam- saturated steam, dry-
saturated steam, wet steam, superheated steam, dryness fraction, property of steam, steam tables, use
of Mollier charts , process of vapors and various process.

Section-C
Gas Power Cycles: Carnot, Diesel, Otto, Dual combustion, working of 2-stroke and 4-stroke engine,
Air standard thermal efficiency, Concepts of mean effective pressure, indicated power and brake
powerfor reciprocating engines.

Section-D
Introduction of Psychometry: The Gibbs Dalton law, Psychometric terms, Introduction of
Psychometry Chart.
Introduction to Heat Transfer: Mechanisms – Conduction, Convection and Radiation, Introduction
to Fourier’s Law of heat conduction, Newton’s law of cooling, Stefan-Boltzmann law.

29
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Introduction to Fluid Mechanics: Fluid, properties of fluid, viscosity, Newton’s law of viscosity,
surface tension, types of fluid, buoyancy.

TEXT BOOKS:

1. Basic Mechanical Engineering by Basant Aggarwal and CM Aggarwal Wiley India.


2. Fundamentals of Mechanical Sciences: Engineering Thermodynamics and Fluid Mechanics by
Mukherjee and Paul, PHI Learning.

REFERENCE BOOKS:

1. Thermodynamics – An Engineering Approach (SI Units) – Yunus. A. Cengel, Michael A.


Boles, TMH New Delhi
2. Fundamentals of Thermodynamics –Sonntag, Borgnakke Van Wylen – Wiley India.
3. Engineering Thermodynamics by P.K. Nag, TMH, New Delhi
4. Thermodynamics by C.P. Arora, TMH, New Delhi
5. Fundamentals of Mechanical Engineering, 2 nd Edition by G.S. Sawhney, PHI Learning Private
Limited.

30
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Principle of Computer Programming & C++ (BE-104)

Course Code BE-104 L-3, T-1, P-0


Name of the Course Principle of Computer Programming & C++
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Examination Max. Time = 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Continuous Assessment (based on sessional tests (2) 50%, Max. Marks: 50
Tutorials/Assignments 30%, Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section E
will be compulsory, it will consist of a single question with 10-20 subparts of short answer
type, which will cover the entire syllabus and will carry 20% of the total marks of the semester
end examination for the course. Section A, B, C & D will have two questions from the
respective sections of the syllabus, and each question will carry 20% of the total marks of the
semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the
questions in Section E. Use of non-programmable calculators is allowed.

SECTION-A
Introduction to Computer:-Definition, Characteristics, Generation of Computers, Capabilities and
Limitations. Introduction to Operating System. Basic Components of a Computer System-Control
Unit, ALU, Input/output functions and characteristics. Memory Introduction, Classifications- Volatile
Memory and Non- Volatile, Memory, ROM, RAM.

Input, Output and storage Units:-Computer Keyboard, Pointing Devices: Mouse, Trackball, Touch
Panel, and Joystick, Light Pen, Scanners, Various types of Monitors.
Hard Copy Devices: - Impact and Non- Impact Printers- Daisy Wheel, Dot Matrix, Line Printer,
Chain Printer. Non Impact Printers- DeskJet, Laser Printer, Virus: General introduction of virus and
anti-virus.

SECTION-B
High Level Language and Low Level Language, Software and its different types- System Software,
Application software. Compiler, Interpreter and Assembler. Introduction to algorithm and Flow chart:
- Representation of an algorithm, flowchart symbols and flow chart, rules, advantage and limitations of
flowchart and pseudo code. Testing and Debugging:-Definition of testing and debugging , types of
program errors.
DOS : Internal and External Commands , Difference between External and Internal Commands.

SECTION-C
Introduction to C++ : Starting with C++, Features of C++ Procedure-oriented programming OOP vs.
procedure-oriented programming Compiling, linking and running a C++ program.

Object-Oriented Programming Concepts: Abstraction , Inheritance, Polymorphism, Data Binding ,


Encapsulation., Classes and Objects Concept of a class ,Defining a class, Creating an object , Object
Scope.

31
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

The Basics of C++ :Basic Data Types, User-defined Data Types, Variable Declarations, Variable
Names Constants and its types , Character Constants , String Constants, Standard input and standard
output Formatted input –cin and Formatted output – cout.

Working with Operators and Expressions: Operators, Arithmetic Operators, Relational Operators,
Assignment Operator, Logical Operators, Increment and Decrement Operators (++ and --), 'Operate-
Assign' Operators (+=, =, ...).

SECTION-D
Controlling the Program Flow
Decision control: if, if – else, if - else if. Loop Control: while, do – while, for, break, continue Case
Control switch, goto.
Functions/Procedures: function, Returning values from functions, Arguments Passed by Value
Passing Addresses of Arguments, Concept of variable scope and scope rules, Global variables
Pointers and Arrays: Pointers, Pointer Initialization, Pointer Operators, The & (and) Operator
Understanding Arrays, Initializing Arrays.
Files: reading, writing text and binary files, pointers, character pointers, pointers to arrays, arrays of
pointer to structures.

Text Books:

1. Fundamentals of Computers by Rajaraman, V., PHI Publication


2. Object oriented programming in C++ by Rajesh K. Shukla, Wiley India.

Reference Books:

1. The C++ programming language, BjarneStroustrup, Addison Wesley, 2000.


2. Basic Computer Engineering, Kogent learning solution Inc. Dreamtech Press.
3. Object oriented programming Principles and Fundamental, Gim Keogh and MarioGiannini,
John Wiley.
4. Object oriented programming in turbo C++ ,RobbetLofre, 4 Ed Pearson Publication.
5. Programming with C++, D. Ravichandern, TataMcgraw Hill 1996.
6. Object oriented programming in C++, Nicolai M Josuetis, John Wiley.

32
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Engineering Chemistry Lab (NS-103(P))

Course Code NS-103(P) L-0, T-0, P-2


Name of the Course Engineering Chemistry Lab
Lectures to be Delivered 26 hours of Lab. work (2 hrs. per week)
Semester End Examination Max Marks: 25 Min Pass Marks: 10 Maximum Time: 3 hrs
Continuous Assessment Lab work 30% Lab Record 25% Max Marks: 25
Viva/ Hands on 25% Attendance 20%

Instructions for paper setter / candidates


Laboratory examination will consist of two parts:
Performing a practical exercises assigned by the examiner.
Viva-voce examination
Viva-voce examination will be related to the practicals performed / project executed by the candidate
related to the paper during the course of the semester.

NOTE: At least 10 to 12 experiments to be performed.

List of Experiments

1. To determine the surface tension of the given liquid by drop number method by using stalgmometer
and identify the given liquid.
2. To determine the insoluble, soluble and total solids in given sample of sewage.
3. To determine the solid carbon, volatile matter, ash content and percentage of moisture in given
sample of coal by proximate analysis method and classify the coal.
4. To determine the total alkalinity in a given sample of water using a standard acid. Ask for what you
want
5. To determine the percentage of Chlorine in a given sample of CaOCl2 which has been dissolved in
one litre of solution.
6. To determine the surface tension of the two given unknown liquids by using Stalgmometer and
identify the given liquid.
7. To determine the coefficient of viscosity of the given unknown liquids by using Ostwald’s
Viscometer and identify the given liquid.
8. To determine the coefficient of viscosity of the given lubricating oil using Red Wood Viscometer
9. To determine the coefficient of viscosity of the given lubricating oil using Seybolt Viscometer.
10. To determine the flash point and fire point of given sample of oil using Pens key Marten’s
apparatus.
11. To determine the amount of Chlorine in given sample of water approximate N/20 sodium
Thiosulphate solution. Ask for your requirement
12. To determine the maximum wavelength of solution of cobalt chloride
13. To determine the Beer’s Law and apply it to find the concentration of given unknown solution by
spectra-photometer.
14. To determine the chemical oxygen demand of waste water.
15. To determine the half-life period of given radioactive sample using GM counter.

33
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Communication & Professional Skills Lab-I (HS-102(P))

Course Code HS-102 (P) L-0, T-0, P-2


Lectures to be Delivered 26 hours of Lab. work (2 hrs. per week)
Semester End Examination Max Marks: 25 Min Pass Marks: 10 Maximum Time: 3 hrs
Continuous Assessment Lab work 30% Lab Record 25% Max Marks: 25
Viva/ Hands on 25% Attendance 20%

Instructions for paper setter / candidates:


Laboratory examination will consist of two parts:

(i) Performing a practical exercises assigned by the examiner.


(ii) Viva-voce examination

Note: Each practical should be performed twice for effectiveness.

List of Practicals:

1. Word processing a document.


2. Power point presentations.
3. Resume / Biodata preparation.
4. Report writing.
5. Preparing notice, agenda and minutes of meeting.
6. Preparation of Quotation and tender document.
7. Note making based reading comprehension.
8. Précis Writing.

Recommended books:

1. English Conversation Practice by Grant Taylor.


2. Business correspondence and Report Writing: by R. C. Sharma & Krishna Mohan.
3. Chrissie Wright (Ed.); Handbook of Practical Communication Skills; JAICO Books.
4. Veena Kumar, The Sounds of English, Makaav Educational Software, New Delhi.

34
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Computer Programming Laboratory (BE-104(P))

Course Code BE-104 (P) L-0, T-0, P-2


Name of the Course Computer Programming Laboratory
Lectures to be Delivered 26 Hrs. of Lab work (2hrs. each per week)
Semester End Examination Max Marks: 25 Min Pass Marks: 10 Maximum Time: 3 hrs
Continuous Assessment Lab work 30% Lab Record 25%, Max Marks: 25
Viva 25% Attendance 20%

1. Write a Program to find the sum, difference, product and quotient of two integers.
2. Write a program C++ Program to output an integer, a floating point number and a character.
3. Write a program to switch between different cases.
4. Write a program to count the number of words and characters in a sentence.
5. Program to find the roots of a quadratic equation.
6.
 Create a class rational which represent a numerical value by two double values numerator and
Denominator include the following public members functions
 Constructor with no argument(default)
 Constructor with two arguments
 Void reduce ()that reduce the rational number by eliminating the highest common factor
between the numerator and the denominator
 Overload + operator to add two rational numbers
 Overload >> operator to enable input through cin.
 Overload << operator to enable input through cout.

7. Write a program to convert days into years and weeks.


8. Write a program to convert temperatures from Celsius to Fahrenheit and vice versa.
9. Write a program to find the sum of either of the diagonals of a 4 x 4 matrix.
10. Write a program to enter a sentence and output the number of uppercase & lowercase
consonants, uppercase & lowercase vowels in sentence.
11. Write a program to enter 10 integers in a single-dimension array and then print out the array in
ascending order.
12. Write a program to find the sum of each row & column of a matrix of size n x m and
if matrix is square, find the sum of the diagonals also.
13. Write a program to display fibonacci series upto n terms.
14. Write a program for payroll system using inheritance.
15. To calculate the total mark of a student using the concept of virtual base class.
16. Program for Write File Operation Using C++ Programming.
17. Write a program that creates a binary file by reading the data for the student for the terminal
.The data of each student consist of roll number, name (a string of thirty or lesser number of
characters) and marks.
18. Write a program to read a number and display its square, square root, cube and cube root. Use a
virtual function to display any one of the above.
19. Write a program to read two matrix and find their product use operator overloading so that the
statement for multiplying the matrix may be written as Z=x*y where x,y,z are matrices.

35
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

WORKSHOP PRACTICE-II (WS-102)

Course Code WS-102 L-0, T-0, P-3


Name of the Course Workshop Practice -II
Lectures to be delivered 39 hours of Lab sessions in each semester
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%
INSTRUCTIONS:
Laboratory examination will consist of two parts:
(i) Performing a practical exercises assigned by the examiner.
(ii) Viva-voce examination
Viva-voce examination will be related to the practicals performed / project executed by the candidate
related to the paper during the course of the semester.
List of Experiments: -
Fitting Shop: -
1. Drilling and Tapping in a M.S. piece.
2. To make a male-female joint (Taper type) of mild steel.
Machine Shop: -
1. To perform boring operation on lathe machine.
2. To perform knurling and threading operation on lathe machine.
3. Step turning operation on a lathe machine.
Carpentry and Pattern making Shop: -
1. To make a single piece pattern of connecting rod.
2. To make a self-cod pattern.
3. To make a split pattern.
Welding Shop: -
1. To make a V butt joint in horizontal position.
2. To make a V butt joint in vertical position.
3. To perform Gas welding operation.
Smithy and Forging: -
1. To make a cube from a circular bar.
2. To make a tong using hot forging operations.
3. To perform drawing down operation.
Foundry Shop: -
1. To make a mould and perform casting operation.
2. Study of casting defects and its remedies.
Sheet Metal Working Shop: -
Blanking and piercing die construction, press work materials, strip layout, bending dies, forming dies,
drawing operations, single and double action draw dies.
1. To make a Ring by Piercing.
2. To make a square shaped object by Bending and Forming Operation.
3. To Draw a Wire.
Books:
1. Workshop Technology by Chapman
2. Manufacturing Processes by Begman
3. Manufacturing Materials and Processes by J.S. Campbell

36
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER-III
ENGINEERING ECONOMICS HS-201

Course Code HS-201 L-3, T-0, P-0


Name of the Course Engineering Economics
Lectures to be delivered 39 (1 Hr Each) (L = 39, for each semester)
Semester End Max. Time = 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Examination
Continuous Assessment (based on sessional tests (2) Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A,
B, C & D will have two questions from the respective sections of the syllabus and each section
will carry 20% of the total marks of the semester end examination for the course. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type,
which will cover the entire syllabus and each question will carry 20% of the total marks of the
semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the
questions in Section E. Use of non-programmable calculators is allowed.

Section-A

Economics: Definition, nature and scope of economics, need &significance of economics in


Engineering, Economic Systems-Meaning of capitalism, socialism and mixed economy.

Demand: Meaning, determinants of demand, demand curve, law of demand, exception to the law of
demand, increase &decrease in demand, contraction &extension of demand, Elasticity of demand,
Methods of measuring Elasticity of demand.

Supply: Law of supply, extension & contraction of supply, increase & decrease in Supply, Elasticity
of supply.

Section-B

Cost of Production: Concept, types, Relation between average & marginal cost.

Theory of Production: Laws of returns- Law of variable proportions and law of returns to Scale,
Break Even Analysis.

Price & Output Determination: Price determination under perfect competition, monopoly,
monopolistic competition & oligopoly.

Section-C

Monetary policy- Meaning, objectives, methods, Fiscal policy- Meaning &Objectives of fiscal policy
In a developing country like India, Functions of Reserve Bank of India and commercial banks.

37
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Economics & Business Environment- Business/Trade Cycles- Meaning, Characteristics &


classification, Inflation Effect, Foreign capital &economic development, Engineering Economics
Analysis, Economics Analysis in the public and regulated sectors.

Section D

Indian Economy: - Characteristics of Indian economy, Planning in India, Development &Growth in


India. Overall Economic policy since independence, Input & output analysis, Problem of
unemployment in India. Concept of sustainable development & inclusive growth in India. Policy of
globalizations, liberisation & privatization. Analysis of state & union budgets.

TEXT BOOKS:

1. Modern Micro Economics by Koutsoyannisa, MC Millen.


2. Principles of Engineering Economics Analysis by John A. White, Kenneth E. Case and
David B. Pratt Wiley India.

REFERENCE BOOKS:

1. Business Economics by K. P. M. Sundharam, Sultan Chand & Sons.


2. Elementary Economics Theory by K.K Dewett & J. D. Verma, S.Chand Publication.

38
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – III

ENGINEERING MATHEMATICS-III NS-206

Course Code NS-206 L-3, T-1, P-0


Name of the Course Engineering Mathematics-III
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time = 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Examination
Continuous Assessment (based on sessional tests Max. Marks: 50
(2) 50%, Tutorials/Assignments 30%,
Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.

Section-A

PARTIAL DIFFERENTIAL EQUATIONS

Formation and solutions of partial differential equations, Lagrange’s linear equation of the first order,
non linear equations of first order, charpit method, Homogenous linear partial differential equation
with constant coefficients, rules for complementary function and particular integral, non-homogenous
linear partial differential equations, Method of separation of variables, Solution of wave equations,
Heat flow equations, Laplace’s equations and their applications to engineering problems.

Section-B

SPECIAL FUNCTIONS

Power series solution of differential equations, Frobenius method, Bessel's equation, Bessel functions
of the first and second kind, Recurrence relations of Bessel functions, Generating functions,
Orthogonality of Bessel functions, Legendre's equation, Legendre polynomial, Recurrence relations of
Legendre's functions, Rodrigue’s formula, Orthogonality of Legendre polynomials, Error function and
its properties.

Section-C
INTEGRAL TRANSFORMS
Laplace Transforms of standard functions and their properties, Inverse Laplace Transforms, General
Properties of inverse Laplace transforms and Convolution Theorem, Laplace Transforms of periodic
functions, Laplace transform of Bessel functions and Error function, Dirac-delta Function, Heaviside’s
Unit Function, Applications to linear simultaneous differential equations. Fourier Integral, Fourier

39
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Transform, Fourier sine and cosine transforms, finite Fourier transform, Convolution theorem for
Fourier Transform and Parseval’s Identity for Fourier Transform.

Section-D

FUNCTIONS OF COMPLEX VARIABLE

Limit and derivative of complex functions, Cauchy-Riemann equations, Analytic functions, Entire
functions and its applications, Conformal mapping and standard transformations, Complex integration,
Cauchy’s theorem and Cauchy’s integral formula (without proof), Series of complex terms, Taylor’s
series and Laurent’s series (without proof), Zeros of analytic functions, isolated singularity, removable
singularity, Poles, essential singularity, Residue, Residue theorem and their applications

TEXT BOOKS

1. Advanced Engineering Mathematics: by Erwin Kreyszig . John Wiley and Sons, NC, New
York.
2. Partial Differential Equation for Engineers and Scientists: by J.N. Sharma and Kehar Singh
Narosa Publishing House, New Delhi/ Alpha Science Int. Ltd, UK.
3. Advanced Engineering Mathematics: by R. K. Jain & S. R. K Iyengar, Narosa Pub. House.
4. Complex Variables Theory and Applications: by HS Kasana, PHI Learning Private Limited
New Delhi, (2008).

REFERENCE BOOKS

1. Advanced Engineering Mathematics: by C. R. Wylie & L. C. Barrett, McGraw Hill.


2. Elements of Partial Differential Equations: by Ian N. Sneddon, McGraw-Hill, Singapore.
3. Differential & Integral Calculus: by N. Piskunov, MIR Publications.
4. Calculus and Analytic Geometry, by Thomes, G.B, Finney, R.L. Ninth Edition, Peason
Education.
5. Advanced Engineering Mathematics,by Peter. V. O. Nil, Wordsworth Publishing Company.
6. Advanced Engineering Mathematics, by Jain, R.K and Lyengar, S.R.K., Narosa Publishing
Company.
7. Higher Engineering Mathematics, by Grewal, B.S., Khanna Publishers, New Delhi.
8. Engineering Mathematics, by Taneja, H.C., Volume-I & Volume-II, I.K. Publisher.
9. Differential Equations: by Shepley L. Ross, John Wiley & Sons, New York.

40
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – III

STRENGTH OF MATERIALS-I ME-211

Course Code ME-211 L-4, T-1, P-0


Name of the Course Strength of Materials-I
Lectures to be 65 (1 Hr Each) (L = 52, T = 13 for each semester)
delivered
Semester End Max. Time = 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Examination
Continuous Assessment (based on sessional Max. Marks: 50
tests (2) 50%, Tutorials/Assignments 30%,
Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A
Compound stresses & strains: Concept of surface and volumetric strains, two -dimensional
stress system, complementary shear stresses at a point on a plane. Principal stresses & strains
and principal planes. Mohr’s circle of stresses, Numerical problems.

Theories of Elastic Failure: Various theories of elastic failure with derivations and graphical
representations, applications to problems of two-dimensional stress systems with (i) Combined
direct loading and bending and (ii) combined torsional and direct loading. Numerical problems.

Section-B
Strain Energy & Impact Loading: Definitions, expressions for strain energy stored in a body
when load is applied (i) gradually, (ii) suddenly and (iii) with impact. Strain energy of beams in
bending, beam deflections. Strain energy of shafts in twisting. Energy methods in determining
spring deflection, Castigliano’s & Maxwell’s theorems, Numerical problems.

Section-C
Shear and combined stresses in beams: Shear stresses in beams with derivation of shear
stress in rectangular I, T, circular and hollow circular sections. Combined bending, torsion &
axial loading of beams. Numerical problems.

Columns & Struts: Columns under axial load, concept of instability and buckling, slenderness
ratio. Derivation of Euler’s formulae for the elastic buckling load. Euler’s, Rankine Gordon’s
formulae ,Johnson’s empirical formula for axial loading of columns and their applications,
eccentric compression of a short strut of rectangular & circular sections, Numerical problems.

41
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-D
Slope & Deflection: Relationship between bending moment, slope & deflection, Mohr’s theorem,
moment area method, method of integration, Macaulay’s method. Calculations for slope
&deflection of (1) cantilevers and (2) simply supported beams with or without overhang, under
concentrated loads, uniformly distributed loads or combination of concentrated and uniformly
distributed loads. Numerical problems.

Fixed Beams: Deflections, reactions and fixing moments. Calculations of deflection and S.F. &
B.M. diagrams for fixed beams under (1) concentrated loads, (2) uniformly Distributed loads and
(3) a combination of concentrated loads and uniformly distributed load.

Text Books:

1. Mechanics of Materials-E.J. Hearn, Elsevier Publications.


2. Mechanics of Materials-R.C.Hibbeler, Pearson India (9th Edition).

Reference Books:

1. Strengths of Materials-Popov , PHI, New Delhi.


2. Strength of Materials-G.H. Ryder- Third Edition in S.I. units 1969 Macmillan India.
3. Strengths of Materials-Sadhu Singh, Khanna Publications.
4. Strengths of Materials – R.K. Rajput, S.Chand & Sons.
5. Fundamentals of Strength of Materials – Nag & Chanda, Wiley India.
6. Mechanics of Materials- Dr. Kirpal Singh, Standard Publishers Distributors, New Delhi.

42
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – III

APPLIED THERMODYNAMICS ME - 212

Course Code ME - 212 L-4, T-1, P-0


Name of the Course Applied Thermodynamics
Lectures to be 65 (1 Hr Each) (L = 52, T = 13 for each semester)
delivered
Semester End Max. Time = 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional Max. Marks: 50
tests (2) 50%, Tutorials/Assignments 30%,
Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.

Note: The Paper setter will be required to mention a note in the question paper that the use
of steam table, charts, graphical plots are permitted.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A
Steam Boiler: Boilers and their classification, comparison between fire tube and water tube
boilers, essentials of a good boiler. Constructional and operational details of Locomotive,
Babcock-Wilcox, and Lamont boilers. Boiler mountings and accessories. Natural draft from
chimney, height of chimney, maximum draft and chimney efficiency, forced draft and induced
draft, Boiler Heat Balance Sheet.

Section-B
Vapour Power Cycles: Carnot and Rankine vapour cycles, effect of operating conditions on
thermal efficiency of Rankine cycle, Rankine cycle with superheat, reheat cycle and regenerative
feed heating cycle, Binary vapour cycle.

Flow Through Nozzles: Velocity and heat drop, mass discharge through a nozzle, critical
pressure ratio and its significance, effect of friction and nozzle efficiency, supersaturated flow,
nozzles off the design pressure ratio.

Section-C
Steam Turbines: Classification, flow through impulse blades, velocity diagram, calculation of
power output and efficiency, maximum blade efficiency of single stage impulse turbine, blade
friction, compounding of impulse turbine. Flow through impulse reaction blades, degree of

43
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

reaction, velocity diagram, calculations for power output, efficiency and blade height,
comparison of impulse and impulse reaction turbines.

Efficiency and Governing in Steam Turbines: Losses in steam turbines, stage efficiency overall
efficiency and reheat factor. Governing of steam turbines, throttle governing, nozzle control
governing and by pass governing. Steam for heating and process work, back pressure turbines
and pass out turbines.

Section-D
Steam Condensers: Elements of a condensing plant, types of condensers, comparison of jet and
surface condensers. Condenser vacuum, air leakage and loss of vacuum, vacuum efficiency and
condenser efficiency, Dalton’s law and air vapour mixture, air pumps.

Thermodynamic (pvt) Relations of Working Fluids: Equation of state for ideal gas, Behaviour
of real gases and compressibility factor, Generalized, empirical and theoretical equations of state
for real gases. Helmoltz and Gibbs functions, Maxwell’s relations, Enthalpy, entropy, internal
energy, and specific heat relations, Clausius- Clapeyron’s equation. Joule Thompson coefficient.

Text Books:

1. R. Yadav, “Thermodynamics and Heat Engines, Vol-II”, Central Publishing House.


2. R.S.Khurmi, “A textbook of Thermal Engineering, S.Chand & Sons.

Reference Books:

1. Bellany, P.L., “Thermal Engineering”, Khanna Publishers.


2. T.D. Eastop & A McConkey, “Applied Thermodynamics for Engineering Technologists”,
Pearson Education.
3. V.P. Vasandani & D.S. Kumar, “Heat Engineering”, Metropolitan Book Co. Pvt. Ltd.
4. Cengel, Y.A., & Boles, M.A.., “Thermodynamics – An Engineering Approach”, McGraw – Hill Inc.
5. Rajput, R.K., “Thermal Engineering”, Laxmi Publications.

44
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – III

MACHINE –DRAWING ME-213

Course Code ME – 213 L-1, T-0, P-4


Name of the Course Machine –Drawing
Lectures to be 65 (1 Hr Each, L = 13, T = 0, P=52 for each semester)
delivered
Semester End Max. Time = 4 hrs. Max. Marks: 100 Min. Pass Marks: 40
Examination
Continuous Assessment (based on sessional Max. Marks: 50
tests (2) 50%, Tutorials/Assignments 30%,
Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:

1. In the semester examination, the examiner will set two questions from each section. The students
have to attempt three questions taking one from each section.

2. The questions from Section-A and Section-B will carry 20 Marks each. Questions from Section-C
will carry 60 Marks.

SYLLABUS:
Section-A
Introduction to BIS Specification sp: 46- 1988 Code of engineering drawing – Limits. Fits and
Tolerance (dimensional and Geometrical tolerance), Surface finish representation. Gear: Gear
terminology. I.S convention of assembly of spur gears, helical gear, bevel gears, worm and worm
wheel.

Section-B
Orthographic view from isometric views of machine parts / components. Dimensioning-
Sectioning. Exercises on coupling, crankshaft, pulley, piston and connecting rod, cotter and
knuckle joints. Riveted joints and Welded joints.

Section-C
Assembly drawing with sectioning and bill of materials from given detail drawings of
assemblies : Lathe tail stock , machine vice , pedestal bearing , Steam stop valve , drill jigs and
milling fixture.
Text Books:

1. Machine Drawing: N D Bhat and V M Panchal, Pub: Charotar Publishing House.


2. A text book of machine drawing: PS Gill, Pub: S.K.Kataria & Sons.

Reference Books:
1. A text books of machine Drawing: Laxmi narayana and Mathur, Pub:
M/S Jain Brother. New Delhi.
2. Machine Drawing: N Sidheshwar, P Kannaieh, V V S Sastry, Pub: Tata McGraw Hill.

45
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – III

FLUID MECHANICS ME – 214

Course Code ME – 214 L-4, T-1, P-0


Name of the Course Fluid Mechanics
Lectures to be 65 (1 Hr Each) (L = 52, T = 13 for each semester)
delivered
Semester End Max. Time = 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Examination
Continuous Assessment (based on sessional Max. Marks: 50
tests (2) 50%, Tutorials/Assignments 30%,
Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.
SYLLABUS:

Section-A
Introduction: Fluid and flow-definition and types, properties of ideal and real fluids, continuum
concept, Lagrangian & Eulerian approach.

Fluid Statics: General differential equation, manometry, Force on plane and curved surfaces,
stability of floating and submerged bodies, Relative equilibrium.

Section-B
Kinematics of fluid: Steady flow, uniform flow, stream, streak and path lines, continuity
equation, stream function, irrotational flow, velocity potential, flow nets, circulation, simple
flows, flow around circular cylinder with and without rotation, lift and drag.

Dynamics of fluids: Concept of system and control volume, Reynold’s transportation theorem,
Euler’s equation, Bernoulli’s equation, Navier Stoke’s equation and their application to nozzle,
venturimeter, orifices and mouth pieces, time taken in emptying a vessel. Pitot - Prandtl tube.

Section-C
Laminar flow of viscous fluids: Boundary layer concept, boundary layer thickness,
displacement, momentum and energy thickness, integral method, drag on flat plate, flow around
an airfoil, boundary layer separation.

Turbulent flow: Fluid friction and Reynolds number, Prandtl mixing length hypothesis velocity
distribution in pipes, Cole brook formula.

46
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-D
Flow in pipes: Laminar flow through pipe, total and hydraulic gradient lines, series and parallel
connection of pipes, transmission of power through pipes.

Dimensional analysis: Buckingham’s Pi theorem, Non – dimensional numbers and their


application, Similitude.

Text Books:

1. Modi and Seth, Fluid Mechanics and Hydraulic Machines, CBS Publishers.
2. Munson, Young, Okiishi and Huebsch, Fundamentals of Fluid Mechanics, Wiley India (6th
Edition).

Reference Books:

1. White F.M., Fluid Mechanics, Tata McGraw Hill.


2. Douglas, Gasiorek, Swaffield and Jack, Fluid Mechanics, Pearsons (5th Edition).
3. Som, S.K. and Biswas, G., Introduction to Fluid Mechanics and Fluid Machines, Tata Mc-
Graw Hill.
4. Bansal, R.K., Text Book of Fluid Mechanics and Hydraulic Machines, Laxmi Publications
(P) Ltd.
5. Agarwal, Fluid Mechanics and Machinery, Tata McGraw Hill.
6. Rajput, R.K., A Text Book of Hydraulics, S. Chand and Sons, New Delhi.

47
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – III

STRENGTH OF MATERIALS – LAB. ME – 211 (P)

Course Code ME – 211 (P) L-0, T-0, P-2


Name of the Course Strength of Materials Lab.
Lectures to be delivered 26 hours of Lab sessions (2 Hrs per week)
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10 Maximum Time: 3 Hrs
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%

INSTRUCTIONS FOR PAPER SETTER/CANDIDATES:

Laboratory examination will consist of two parts:


i) Performing a practical examination assigned by the examiner.
ii) Viva-voce examination.
Viva-voce examination will be related to the practicals performed/projects executed by the
candidate related to the paper during the course of the semester.

LIST OF EXPERIMENTS:

1. To study the Brinell hardness testing machine & perform Brinell hardness test
2. To study the Rockwell hardness testing machine & perform the Rockwell hardness test.
3. To study the Vickers hardness testing machine & perform Vickers hardness test
4. To study Erichsen sheet metal testing machine & perform the Erichsen sheet metal test
5. To study the Impact machine and perform the Impact tests ( Izod & Charpy)
6. To study the Universal testing machine and perform the tensile test.
7. To perform compression test on UTM.
8. To perform bending test on UTM.
9. To perform the shear test on UTM.
10. To study the torsion testing machine and perform the torsion test.

48
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – III

FLUID MECHANICS LAB. ME – 214 (P)

Course Code ME – 214 (P) L-0, T-0, P-2


Name of the Course Fluid Mechanics Lab.
Lectures to be delivered 26 hours of Lab sessions (2 Hrs per week)
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10 Maximum Time: 3 Hrs
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%

INSTRUCTIONS FOR PAPER SETTER/CANDIDATES:

Laboratory examination will consist of two parts:


i) Performing a practical examination assigned by the examiner.
ii) Viva-voce examination.
Viva-voce examination will be related to the practicals performed/projects executed by the
candidate related to the paper during the course of the semester.

LIST OF EXPERIMENTS:

1. To determine the coefficient of impact for vanes.


2. To determine the coefficient of discharge of Notch (V and Rectangular types)
3. To determine the friction factor for the pipes.
4. To determine the coefficient of discharge of venturimeter.
5. To determine the coefficient of discharge, contraction & velocity of an orifice.
6. To find critical Reynolds number for a pipe flow.
7. To determine the meta-centric height of a floating body.
8. To determine the minor losses due to sudden enlargement, sudden contraction and bends.

49
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – III
AutoCAD LABORATORY ME – 213 (P)

Course Code ME – 213 (P) L-0, T-0, P-2


Name of the Course AutoCAD Lab.
Lectures to be delivered 26 hours of Lab sessions (2 Hrs per week)
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10 Maximum Time: 3 Hrs
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%

INSTRUCTIONS FOR PAPER SETTER/CANDIDATES:

Laboratory examination will consist of two parts:


i) Performing a practical examination assigned by the examiner.
ii) Viva-voce examination.
Viva-voce examination will be related to the practical’s performed/projects executed by the
candidate related to the paper during the course of the semester.

LIST OF EXPERIMENTS:

1. Setting up of drawing environment by setting drawing limits, drawing units, naming the drawing
naming layers, setting line types for different layers using various type of lines in Engineering
drawing, saving the file with dwg. extension.
2. Layout drawing of a building using different layer and line colors indicating all Building details
name the details using text commands, Make a title Block.
3. To Draw Orthographic projection drawings (Front, Top and side) of boiler safety valve giving name
the components of the valve.
4. Make an Isometric dimensioned drawing of a connecting Rod using Isometric grid and snap.
5. Draw quarter sectional isometric view of a cotter joint.
6. Draw different types of bolts and nuts with internal and external threading in Acme and square
threading standards. Save the bolts and nuts as blocks suitable for insertion.
7. Draw a 3D model of a machine component using 3D primitives and using commands like Union.
Subtraction, Revolve, Slice, Rotate 3D etc. Calculate surface Area, Mass, Centre of Gravity and Mass
moment of inertia using inquiry commands render the figure made and attach a material to the
figure.
8. Draw 3D model of protected type flange coupling.
9. Draw a spiral by extruding a circle.
10. Draw an assembly of Jigs & Fixture in 3D.

50
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – IV

HUMAN VALUES AND PROFESSIONAL ETHICS HS-203

Course Code HS-203 L-2, T-0, P-2


Name of the Course Human Values and Professional Ethics
Lectures to be delivered 52 (1 Hr Each) (L = 26, P = 26 for each semester)
Semester End Max. Time = 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Examination
Continuous Assessment (based on sessional tests Max. Marks: 50
(2) 50%, Tutorials/Assignments 30%,
Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A, B,
C & D will have two questions from the respective sections of the syllabus and each section will
carry 20% of the total marks of the semester end examination for the course. Section E will be
compulsory, it will consist of a single question with 10-20 subparts of short answer type, which
will cover the entire syllabus and each question will carry 20% of the total marks of the semester
end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the questions in
Section E. Use of non-programmable calculators is allowed.

OBJECTIVES:
a. To help the students appreciate the essential complementarily between ‘VALUES’ and
‘SKILLS’ to ensure sustained happiness and prosperity which are the core aspirations of all
human beings.
b. To facilitate the development of a Holistic perspective among students towards life,
profession and happiness, based on a correct understanding of the Human reality and the rest
of Existence. Such a holistic perspective forms the basis of Value based living in a natural
way.
c. To highlight plausible implications of such a Holistic understanding in terms of ethical
human conduct, trustful and mutually satisfying human behavior and mutually enriching
interaction with Nature.
Thus, this course is intended to provide a much needed orientation input in Value Education to the
young enquiring minds.
COURSE METHODOLOGY:

 The methodology of this course is universally adaptable, involving a systematic and rational study
of the human being vis-à-vis the rest of existence.
 It is free from any dogma or value prescriptions.
 It is a process of self-investigation and self-exploration, and not of giving sermons.
 Whatever is found as truth or reality is stated as proposal and the students are facilitated to verify it
in their own right based on their Natural Acceptance and Experiential Validation.
 This process of self-exploration takes the form of a dialogue between the teacher and the students
to begin with, and within the student himself/herself finally.

51
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

 This self-exploration also enables them to evaluate their pre-conditionings and present beliefs.

Content

SECTION A: Course Introduction - Need, Basic Guidelines, Content and Process for Value
Education

1. Understanding the need, basic guidelines, content and process for Value Education
2. Self Exploration–what is it? - Its content and process; ‘Natural Acceptance’ and Experiential
Validation- as the mechanism for self exploration
3. Continuous Happiness and Prosperity- A look at basic Human Aspirations
4. Right understanding, Relationship and Physical Facilities- the basic requirements for
fulfillment of aspirations of every human being with their correct priority
5. Understanding Happiness and Prosperity correctly-A critical appraisal of the current scenario
6. Method to fulfill the above human aspirations: understanding and living in harmony at various
levels

SECTION B: Understanding Harmony in the Human Being - Harmony in Myself!


7. Understanding human being as a co-existence of the sentient ‘I’ and the material ‘Body’
8. Understanding the needs of Self (‘I’) and ‘Body’ - Sukh and Suvidha
9. Understanding the Body as an instrument of ‘I’ (I being the doer, seer and enjoyer)
10. Understanding the characteristics and activities of ‘I’ and harmony in ‘I’
11. Understanding the harmony of I with the Body: Sanyam and Swasthya; correct appraisal of
Physical needs, meaning of Prosperity in detail
12. Programs to ensure Sanyam and Swasthya
- Practice Exercises and Case Studies will be taken up in Practice Sessions.

SECTION C: Understanding Harmony in the Family and Society- Harmony in Human- Human
Relationship
13. Understanding harmony in the Family- the basic unit of human interaction
14. Understanding values in human-human relationship; meaning of Nyaya and program for its
fulfillment to ensure Ubhay-tripti;
Trust (Vishwas) and Respect (Samman) as the foundational values of relationship
15. Understanding the meaning of Vishwas; Difference between intention and competence
16. Understanding the meaning of Samman, Difference between respect and differentiation; the
other salient values in relationship
17. Understanding the harmony in the society (society being an extension of family): Samadhan,
Samridhi, Abhay, Sah-astitva as comprehensive Human Goals
18. Visualizing a universal harmonious order in society- Undivided Society (Akhand Samaj),
Universal Order (Sarvabhaum Vyawastha )- from family to world family!
- Practice Exercises and Case Studies will be taken up in Practice Sessions.

SECTION D: Understanding Harmony in the Nature and Existence - Whole existence as Co-
existence
19. Understanding the harmony in the Nature
20. Interconnectedness and mutual fulfillment among the four orders of nature-recyclability and
self-regulation in nature
21. Understanding Existence as Co-existence (Sah-astitva) of mutually interacting units in all-
pervasive space
22. Holistic perception of harmony at all levels of existence
- Practice Exercises and Case Studies will be taken up in Practice Sessions.

52
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SECTION E: Implications of the above Holistic Understanding of Harmony on Professional


Ethics

23. Natural acceptance of human values


24. Definitiveness of Ethical Human Conduct
25. Basis for Humanistic Education, Humanistic Constitution and Humanistic Universal Order
26. Competence in professional ethics:
a) Ability to utilize the professional competence for augmenting universal human order,
b) Ability to identify the scope and characteristics of people-friendly and ecofriendly production
systems,
c) Ability to identify and develop appropriate technologies and management patterns for above
production systems.
27. Case studies of typical holistic technologies, management models and production systems
28. Strategy for transition from the present state to Universal Human Order:
a) At the level of individual: as socially and ecologically responsible engineers, technologists and
managers
b) At the level of society: as mutually enriching institutions and organizations

TEXT BOOK:
1. R R Gaur, R Sangal, G P Bhagaria, 2009, A Foundation Course in Value Education.

REFERENCE BOOKS:
1. Ivan Illich, 1974, Energy & Equity, The Trinity Press, Worcester, and HarperCollins, USA
2. E.F. Schumacher, 1973, Small is Beautiful: a study of economics as if people mattered, Blond
& Briggs, Britain.
3. A Nagraj, 1998, Jeevan Vidya ek Parichay, Divya Path Sansthan, Amarkantak.
4. Sussan George, 1976, How the Other Half Dies, Penguin Press. Reprinted 1986, 1991
5. PL Dhar, RR Gaur, 1990, Science and Humanism, Commonwealth Purblishers.
6. A.N. Tripathy, 2003, Human Values, New Age International Publishers.
7. Subhas Palekar, 2000, How to practice Natural Farming, Pracheen (Vaidik) Krishi Tantra
Shodh, Amravati.
8. Donella H. Meadows, Dennis L. Meadows, Jorgen Randers, William W. Behrens III, 1972,
Limits to Growth – Club of Rome’s report, Universe Books.
9. E G Seebauer & Robert L. Berry, 2000, Fundamentals of Ethics for Scientists & Engineers ,
Oxford University Press
10. M Govindrajran, S Natrajan & V.S. Senthil Kumar, Engineering Ethics (including Human
Values), Eastern Economy Edition, Prentice Hall of India Ltd.

RELEVANT CDS, MOVIES, DOCUMENTARIES & OTHER LITERATURE:


1. Value Education website, http://www.uptu.ac.in
2. Story of Stuff, http://www.storyofstuff.com
3. Al Gore, An Inconvenient Truth, Paramount Classics, USA
4. Charlie Chaplin, Modern Times, United Artists, USA
5. IIT Delhi, Modern Technology – the Untold Story

53
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – IV

NUMERICAL METHODS FOR ENGINEERS NS-207

Course Code NS-207 L-3, T-1, P-0


Name of the Course Numerical Methods for Engineers
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time = 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Examination
Continuous Assessment (based on sessional tests Max. Marks: 50
(2) 50%, Tutorials/Assignments 30%,
Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A, B,
C & D will have two questions from the respective sections of the syllabus and each section will
carry 20% of the total marks of the semester end examination for the course. Section E will be
compulsory, it will consist of a single question with 10-20 subparts of short answer type, which
will cover the entire syllabus and each question will carry 20% of the total marks of the semester
end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the questions in
Section E. Use of non-programmable calculators is allowed.

SECTION –A
SOLUTION OF ALGEBRAIC AND TRANSCENDENTAL EQUATIONS: Bisection method,
Method of false position, secant method, Iteration method, Newton-Raphson method and Generalized
Newton-Raphson method, Rate of convergence and condition of convergence, solution of
simultaneous equations by Iteration method and Newton-Raphson method.
SOLUTION OF SIMULTANEOUS ALGEBRAIC EQUATIONS: Partial and Complete Pivoting,
Gauss Elimination method, Gauss Jordan method, Jacobi’s method, Gauss-Seidal method, Relaxation
method and LU-decomposition method.

SECTION-B
FINITE DIFFERENCE AND INTERPOLATION: Errors and approximation analysis,
Interpolation, Various difference operators and relation between them, Newton’s forward and
backward interpolation formulae, Central difference Interpolation formula, Gauss’s forward and
backward interpolation formulae, Stirling formula, Bessel formula, Lagrange’s interpolation formula
of unequal intervals, Newton’s divided difference formulae.

SECTION-C
NUMERICAL DIFFERENTIATION AND INTEGRATION: Numerical differentiation:
Derivatives using Newton forward, backward and central difference formulas, Derivatives using Gauss
forward and backward formulas, Derivatives using Bessel formula, Derivatives using Newton divided
difference formulas, Maxima and minima of tabulated functions.
NUMERICAL INTEGRATION: Newton-Cotes Quadrature formula, Trapezoidal rule, Simpson’s
1/3rd and 3/8th rules, Boole’s and Weddle’s rules, Errors and accuracy of these formulae (Trapezoidal
rule, Simpson’s 1/3rd rule) Romberg’s integration.

54
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SECTION-D
NUMERICAL SOLUTIONS OF ORDINARY EQUATIONS: Picard method, Taylor’s series
method, Euler’s method, Runge’s method, Runge-Kutta method, Predictor- Corrector Methods:
Milne’s method and Adams-Bashforth method.
NUMERICAL SOLUTIONS OF PARTIAL DIFFERENTIAL: Finite difference approximations of
partial derivatives, solution of Laplace equation (Standard five-point formula and Diagonal five-point
formula), Solution of Poisson equation.

TEXT BOOKS:
1. Numerical methods for Scientific & Engg. Computations: M. K. Jain, S. R. K. Iyengar & R. K.
Jain; Wiley Eastern Ltd.
2. Introductory Methods of Numerical Analysis Engineers & Sciences: S. S. Sastry, PHI Learning
Private Limited New Delhi, (2009).

REFERENCE BOOKS:
1. Numerical Methods in Engineers & Sciences: J.N Sharma: Narosa Publishers.
2. Numerical Methods in Engg. & Sciences: B.S.Grewal : Khanna Publishers.
3. Computer Oriented Numerical methods: U. Rajaraman Orebtuce; Hall of India.
4. Introduction to Numerical Analysis: C. E. Froberg; Addison Wesley.

55
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – IV

METROLOGY AND INTERCHANGEABILITY ME - 221

Course Code ME - 221 L-3, T-1, P-0


Name of the Course Metrology and Interchangeability
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time = 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Examination
Continuous Assessment (based on sessional Max. Marks: 50
tests (2) 50%, Tutorials/Assignments 30%,
Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A

Standards of Measurements: Line standards, imperial standard yard, standard meter, sub-standards
and standards, end bars, slip gauges, angular slip gauges, wave length standard.

Measuring Principles: Principle for mechanical measuring instruments – Lever method, vernier
method, screw & screw nut method. Compound gearing method, helical strip method. Principles of
optical measuring instruments. Reflection, refraction interference, optical prism, lenses, optical
systems. Principle of electrical measuring instruments. Transformation of energy, variation of electric
parameters,- Principles of pneumatic measuring instruments. Construction details of measuring
instruments. Abbe principle, graduation lines and scale division, pivot & bearings. Measuring accuracy
– dimensional & geometrical accuracy. Types of error, systematic error, compound error, random
error.

Section-B
Interchangeability: Concept and need of interchangeability. Tolerances & fits & their numerical
problems, Limit gauges, Standardisation. Design standardisation. Manufacturing standardisation.

Linear and Angular Measurement: Use of slip gauges, dial indicators. Mechanical, optical and
electrical comparators, pneumatic gauges, measuring machines, sinebars & angle, gauges, levels,
clinometer, auto-collimator, tapper gauges.

Section-C
Straightness, Flatness and Squareness testing: Auto-Collimator Method & its application.

Screw Thread Measurement: Errors in threads, screw thread gauges, measurement of element of the
external and internal threads, thread caliper gauges.

56
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-D
Spur Gear Measurement: Geometry of spur gear, measurement of spur gear parameters, ram out,
pitch, profile, lead, backlash, tooth thickness, composite elements.

Surface Finish Measurement: Definition measurement of surface, finishtaly surf, profilometer,


tomilson recorder, compariscope, microscope interference methods.

Miscellaneous: Acceptance tests for a lathe. Alignment of bearings.

Text Books:

1. Bewoor , Anand K. and Kulkarni, Vinay A., “Metrology & Measurement”, TMH New Delhi.
2. Gupta, I.C., “Engineering Metrology”, Dhanpat Rai & Sons, New Delhi.

References Books:

1. Hume, K.J., “Engineering Metrology”, Mac Donald & Co.


2. Kumar, D.S., “Mechanical Measurements and Control”, Metropolitan, New Delhi.
3. Doeblein, E.O., “Measurement Systems, Application Design”, Mc Graw Hill, 1990.
4. Beckwith Thomas G., “Mechanical Measurements”, Narosa Publishing House, N.Delhi.

57
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – IV

MANUFACTURING TECHNOLOGY – I ME - 222

Course Code ME - 222 L-3, T-1, P-0


Name of the Course Manufacturing Technology – I
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time = 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Examination
Continuous Assessment (based on sessional Max. Marks: 50
tests (2) 50%, Tutorials/Assignments 30%,
Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A

Metal Casting Processes: Introduction, Basic steps in Casting Processes, Advantage and limitations,
sand mold making procedure, Patterns and Cores. Pattern materials, pattern allowances, types of
pattern, colour coding, Molding material, Molding sand composition, and preparation, sand properties
and testing type of sand molds. Types of cores, core prints, chaplets, chills.

Gating systems and Casting Defects, Gates and gaiting systems risers, Melting practice, Cupola,
charge calculations. Casting cleaning and casting defects Fettling, defects in castings and their
remedies, methods of testing of castings for their soundness.

Section-B

Special Casting Processes: Shell molding, precision investment casting, permanent mold casting, die
casting, centrifugal casting, and continuous casting.

Metal forming Processes: Introduction to Forming, Nature of plastic deformation, hot working and
cold working. Principles of rolling roll passes roll pass sequences. Forging: Forging operations, smith
forging, drop forging, press forging, forging defects.

Section-C
Extrusion and other processes : Extrusion principle, hot extrusion, cold extrusion, wire drawing,
swaging, tube making, Sheet metal operation, Press tool operations, shearing action, drawing dies,
spinning, punching, piercing, bending, stretch forming, embossing and coining.

58
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Welding and Welding Defects: Introduction to Welding, Gas and Arc Welding, Classification: Oxy-
acetylene welding equipment and techniques. Electric arc welding: Electrodes, Tungsten inert gas
welding (TIG), metal inert gas welding (MIG), submerged arc welding (SAW), Resistance Welding:
Principle & types, Welding Defects and Remedies.

Section-D

Other Welding Processes: Introduction: Thermit welding, electro slag welding, electron beam
welding, forge welding, friction welding, diffusion welding, brazing and soldering.

Machine Tools: Introduction, constructional features, specialization, operations and devices of basic
machine tools such as lathe, shaper, planner, drilling machining, and milling machine. Indexing in
Lathe, Indexing in milling and other operations. Working principles of capstan and turret lathes.

Text Books:

1. Principles of Manufacturing Materials & Processes – Campbell J.S., Mc Graw Hill.


2. Manufacturing Science – Ghosh A., Malik A.K. Affiliated East-West Press Pvt. Ltd., New Delhi.

Reference Books:

1. Production Technology: R.K.Jain, Khanna Publishers.


2. Manufacturing Technology: Vol I & Vol II, P.N.Rao, Tata McGraw Hill.
3. Manufacturing Technology: R.K. Rajput, Laxmi Publications.
4. Welding and Welding Technology: Richard L.Little, Tata McGraw Hill.
5. Principle of Metal casting- Rosenthal, Tata McGraw Hill.
6. Manufacturing Processes and Systems: Ostwald Phillip F., Munoz Jairo, John Wiley & Sons
(Asia) Pvt. Ltd.

59
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – IV

STRENGTH OF MATERIALS – II ME - 223

Course Code ME - 223 L-4, T-1, P-0


Name of the Course Strength of Materials – II
Lectures to be delivered 65 (1 Hr Each) (L = 52, T = 13 for each semester)
Semester End Max. Time = 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Examination
Continuous Assessment (based on sessional tests Max. Marks: 50
(2) 50%, Tutorials/Assignments 30%,
Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A

Thin Walled Vessels: Derivation of Hoop & Longitudinal stresses & strains in cylindrical & spherical
vessels under internal pressure. Change in volume of vessel under pressure, Numerical problems.

Thick Cylinders & Spheres: Derivation of equations for radial & hoop stresses and strains in thick
cylinders and spherical shells. Compound cylinders and spherical shells subjected to internal fluid
pressure only, hub shrunk on solid shaft. Wire-wound cylinders. Numerical problems.

Section-B
Rotating Rims, Discs & Cylinders: Stresses and strains in (i) rotating rims, neglecting the effect of
spokes, (ii) rotating discs, including disc of uniform strength and disc shrunk on hub (iii) rotating
cylinders (solid & hollow). Numerical problems.

Section-C
Bending of Curved Bars: Stresses in bars of initial large radius of curvature, bars of initial small
radius of curvature. Stresses in crane hooks, rings and chain links of circular & trapezoidal sections.
Numerical Problems.

Springs: Stresses in closed and open coiled helical springs subjected to axial loads and twisting
couples. Leaf springs, flat spiral springs. Numerical Problems.

Section-D
Unsymmetrical Bending: Properties of beam cross section, product of inertia, ellipse of inertia, slope
of the neutral axis, stresses & deflections, shear center and the flexural axis, Numerical problems.

60
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Continuous Beams: Clapeyrons Theorem, Wilson’s method, Numerical problems

Text Books:

1. Mechanics of Materials-E.J. Hearn, Elsevier Publications.


2. Mechanics of Materials-R.C.Hibbeler, Pearsons India (9th Edition).

Reference Books:

1. Strengths of Materials-R.K. Rajput, S.Chand & Sons.


2. Strengths of Materials-Sadhu Singh, Khanna Publishers.
3. Mechanics of Materials-Dr. Kirpal Singh, Standard Publishers Distributors, New Delhi.
4. Strengths of Materials-Popov , PHI, New Delhi
5. G.H. Ryder-Third Edition in S.I. units 1969 Macmillan India.
6. Strength of material-II, Strength of materials, 2 nd Edition by Srivastava, PHI Learning Private
Limited.

61
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – IV

KINEMATICS OF MACHINES ME – 224

Course Code ME – 224 L-3, T-1, P-0


Name of the Course Kinematics of Machines
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Examination Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
40
Continuous Assessment (based on sessional tests 50%, Max. Marks: 50
Tutorials/Assignments 30%, Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A,
B, C & D will have two questions from the respective sections of the syllabus and each section
will carry 20% of the total marks of the semester end examination for the course. Section E
will be compulsory, it will consist of a single question with 10-20 subparts of short answer
type, which will cover the entire syllabus and each question will carry 20% of the total marks
of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the
questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A
Introduction: Mechanism and machines, kinematics links, kinematic pairs, kinematic chains, plane
and space mechanism, kinematic inversion, equivalent linkages, four link planar mechanisms, straight
line mechanisms, steering mechanisms, pantograph.

Kinematic Analysis of Plane Mechanisms: Displacement analysis, general plane motion,


instantaneous center of velocity, graphical and analytical methods of velocity and acceleration analysis.

Section-B
Cams: Classification of cams and followers, disc cam nomenclature, construction of displacement,
velocity and acceleration diagrams for different types of follower motions, analysis of follower
motions, determination of basic dimension, synthesis of cam profile by graphical approach, cams with
specified contours, tangent and circular arc cams.

Belt, Rope and Chain drives: Design of belt drives, Flat & V-belt drives, Conditions for
Transmission of max. Power, Selection of belt, design of rope drives, and design of chain drives with
sprockets.

Section-C
Gears: fundamental law of gearing, involute spur gears, characteristics of involute action, Interference
and undercutting, center distance variation, non standard gear teeth, helical, spiral bevel and worm
gears.

Gear Trains: Synthesis of simple, compound and reverted gear trains, analysis of epicyclic gear trains.

62
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-D
Kinematic synthesis of Mechanisms: Type, number and dimensional synthesis, function generation,
path generation and body guidance two and three position synthesis of four bar and slider crank by
graphical and analytical methods, Freudenstein’s equation precision position, structural error;
Chebychev spacing, transmission angle.

Text Books:

1. Theory of Mechanisms and Machines: Amitabha Ghosh and Ashok Kumar Mallik, Third Edition
Affiliated East West Press.
2. Theory of Machines: S.S.Rattan, Tata McGraw Hill.

Reference Books:

1. Mechanism and Machine Theory: J.S.Rao and R.V.Dukkipati, Second Edition, New age
International.
2. Theory of Machines and Mechanisms: Joseph Edward Shigley and john Joseph Uicker, Jr.
Second Edition McGraw Hill, Inc.
3. Theory of Machines: V.P.Singh, Dhanpat Rai Publications.

63
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – IV

ORAL AND WRITTEN COMMUNICATION SKILLS LAB. -II HS – 222 (P)

Course Code HS– 222 (P) L-0, T-0, P-2


Name of the Course Oral and Written Communication Skills Lab. -II
Lectures to be delivered 26 hours of Lab sessions (2 Hrs per week)
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10 Maximum Time: 3 Hrs
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%

INSTRUCTIONS FOR PAPER SETTER/CANDIDATES:

Laboratory examination will consist of two parts:


i) Performing a practical examination assigned by the examiner.
ii) Viva-voce examination.

Viva-voce examination will be related to the practical’s performed/projects executed by the candidate
related to the paper during the course of the semester.

Note: Each practical should be performed twice for effectiveness.

List of Practicals:

1. Phonetics: Organs of speech, speech sounds, symbols, articulation of speech sounds-stress and
intonation.
2. SWOT analysis (Personal / Organisation)
3. Group discussion
4. Debate
5. Vocabulary improvement programs
6. Technical write up based on critical thinking (On subject allocated by coordinator)
7. Telephonic etiquettes: Preparing, Controlling and Follow up.

RECOMMENDED BOOKS:

1. Developing Communication Skills: by Krishan Mohan & Meera Bannerji


2. Group Discussions: by Sudha Publications And Ramesh Publishing House, New Delhi
3. Vocabulary Improvement: Words Made Easy: by Diana Bonet
4. Word Power Made Easy: by Norman Lewis

64
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – IV

METEROLOGY AND INTERCHANGEABILITY LAB. ME – 221 (P)

Course Code ME– 221 (P) L-0, T-0, P-2


Name of the Course Meterology and Interchangeability Lab.
Lectures to be delivered 26 hours of Lab sessions (2 Hrs per week)
Semester End Max. Marks: 25 Min. Pass Marks: 10 Maximum Time: 3
Examination Hrs
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%

INSTRUCTIONS FOR PAPER SETTER/CANDIDATES:

Laboratory examination will consist of two parts:


iii) Performing a practical examination assigned by the examiner.
iv) Viva-voce examination.
Viva-voce examination will be related to the practical’s performed/projects executed by the
candidate related to the paper during the course of the semester.

LIST OF EXPERIMENTS:

1. To measure a gap with slip gauges.


2. To measure the height of a circular spigot.
3. To calibrate a micrometer.
4. To measure a plug screw gauge.
5. To check a straight edge.
6. To check a engineer square.
7. To measure the angle of taper plug with sine bar.
8. To check a form gauge by projections including the construction of the projections drawing.
9. To check a sine bar.
10. To measure the pitch error of a screw gauge (plug or Ring).
11. To measure the form and angle of a plug screw gauge by optical methods.
12. To calibrate dial gauge.
13. To compare the two slip gauges using an optical flat.
14. To test the flatness of a surface plate using a block level.

65
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – IV
KINEMATICS OF MACHINES LAB. ME – 224 (P)

Course Code ME– 224 (P) L-0, T-0, P-2


Name of the Course Kinematics of Machines Lab.
Lectures to be delivered 26 hours of Lab sessions (2 Hrs per week)
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10 Maximum Time: 3 Hrs
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%

INSTRUCTIONS FOR PAPER SETTER/CANDIDATES:

Laboratory examination will consist of two parts:


i) Performing a practical examination assigned by the examiner.
ii) Viva-voce examination.
Viva-voce examination will be related to the practical’s performed/projects executed by the
candidate related to the paper during the course of the semester.

LIST OF EXPERIMENTS:

1. To study various types of kinematic links, Pairs, Chains and Mechanisms.

2. To study inversions of 4 Bar Mechanisms, Single and Double slider crank mechanisms.

3. To plot slider displacement, velocity and acceleration against crank rotation for Single Slider Crank

mechanism.

4. To find Coefficient of friction between Belt and Pulley.

5. To study various type of Cam and Follower arrangements.

6. To plot follower displacement vs cam rotations for various Cam Follower systems.

7. To generate spur gear involute tooth profile using simulated gear shaping process.

8. To study various types of gears – Helical, worm & bevel gears.

9. To study various types of gear trains – simple, compound, reverted, epicyclic and differential.

66
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – V

PRINCIPLES OF MANAGEMENT AND CRITICAL THINKING HS-301

Course Code HS-301 L-3, T-0, P-2


Name of the Course Principles of Management and Critical Thinking
Lectures to be delivered 65 (1 Hr Each) (L = 39, P = 26 for each semester)
Semester End Max. Time = 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Examination
Continuous Assessment (based on sessional tests Max. Marks: 50
(2) 50%, Tutorials/Assignments 30%,
Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.

Course Objectives:

 To understand the roles and functions of managers at various (entry, middle and the top) levels
 To explain the relationships between organizational mission, goals, and objectives
 To comprehend the significance and necessity of managing stakeholders
 To conceptualize how internal and external environment shape organizations and their responses
 To demonstrate empirical understanding of various organizational processes and behaviours and
the theories associated with them
 To demonstrate critical thinking skills in identifying ethical, global, and diversity issues in
planning, organizing, controlling and leading functions of management
 To understand organizational design and structural issues

Learning Outcomes: On completion of this course the students should be able to:

 Describe the functions of management.


 Outline the historical theories relating to modern management.
 Explain the role of management within a business setting.
 Describe human resource planning and staffing processes needed to achieve optimal performance
 Prepare a business forecast and budget.
 Illustrate how business ethics and social responsibility apply to organizations.
 Describe formal and informal organizational communication processes and how to influence
employees

67
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SECTION A

Historical Perspectives of Management: (6 Hours)

 The behavioural approach to management


 The management science approach
 The contingency approach
 The system approach

Principles of Planning (5 Hours)

 Defining planning, Purposes of planning,


 Advantages and potential disadvantages of planning,
 Management by objectives, Planning tools,
 Strategic planning, Forecasting and budgeting

SECTION B

The Management Task (4 Hours)

 The Role of management,


 Defining management,
 The management process, management functions,
 Management goal attainment,
 Management and organizational resources

Fundamentals of Organizing (5 Hours)

 The definition of organizing


 The organizing process
 The organizing subsystem
 Classical organizing theory

SECTION C

Leadership and Effective Communication (3 Hours)

 Defining leadership; leader vs. manager,


 Leadership behaviours, Transformational Leadership,
 Coaching, Entrepreneurial leadership

Controlling for Productivity (4 Hours)

• Defining production and productivity,


• Quality and productivity, Operations management,
• Operations control, Using control tools to control organizations

68
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SECTION D

Managerial Ethics and Social Responsibility (6 Hours)

• Fundamentals of social responsibility,


• Areas of corporate social responsibility,
• Social responsiveness and decision making,
• Influencing individuals performing social responsibility activities,
• A definition of ethics, Creating an ethical workplace

Making Good Business Decision (6 Hours)

• Types of decisions, Elements of the decision situation,


• The decision making process, Decision making conditions,
• Decision making tools, Processes for making group decisions

TEXT BOOKS:

1. Charles W. L. Hill and Steven McShane (2006) Principles of Management. McGraw-


Hill/Irwin; 1st Edition. ISBN-10: 0073530123, ISBN-13: 978-0073530123
2. Moore & Parker, Critical Thinking, 9th ed. (McGraw-Hill, 2008) ISBN-13: 9780073386676

REFERENCE BOOKS:

1. Gary Dessler (2003). Management: Principles and Practices for Tomorrow's Leaders, Prentice
Hall; 3 rd Edition. ISBN-10: 0131009923, ISBN-13: 978-0131009929
2. Ellen A. Benowitz (2001). Principles of Management. Cliffs Notes. ISBN-10: 076456384X,
ISBN-13: 978-0764563843
3. Griffin, Ricky W., Management seventh edition, Houghton Mifflin Company
4. Fisher, Alec. The Logic of Real Arguments (Second Edition). Cambridge: Cambridge
University Press, 2004.

PRACTICAL CLASS DISCUSSION TOPICS

Some Basics: Issues, Claims, Arguments-Types & Structures, Clarity- Vagueness, Ambiguity,
Credibility, Rhetoric, & Fallacies, Formal Deductive Logic, Deductive Arguments: Truth-Functional
Logic

(a) Symbolization; (b) Truth Tables; (c) Long Truth Table Test; (d) Short Truth Table Test;

(e) Deductions w/Inference Rules; (f) Deductions w/Equivalence Rules

Left brain /right brain exercise, Truth and Knowledge, Good and Bad Reasoning, Inductive and
Deductive Reasoning, Fallacious Reasoning, Psychological Impediments to Cogent Reasoning

Truth, Belief, and the Leader/Follower Relationship.

69
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – V

FLUID MACHINES ME – 311

Course Code ME – 311 L-3, T-1, P-0


Name of the Course Fluid Machines
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A

Impact of free jets: Impulse – momentum principle, jet impingement – on a stationary flat plate and on a
hinged plate – on a moving flat plate – at the centre of a stationery vane, a moving vane and a series of
vanes Jet striking tangentially at the tip of a stationery vane and a moving vane, jet propulsion of ships.

Impulse Turbines: Classification – impulse and reaction turbines, water wheels, component parts,
construction, operation and governing mechanism of a Pelton wheel, work done, effective head available
head and efficiency of a pelton wheel, design aspects, speed ratio, flow ratio, jet ratio number of jets,
number of buckets and working proportions, Performance Characteristics.

Section-B

Francis Turbines: Component parts, construction and operation of a Francis turbine, governing
mechanism, work done by the turbine runner, Euler’s Equation, working proportions and design
parameters, slow, medium and fast runners, degree of reaction and energy transfer inward/outward
radial flow reaction turbines, Performance Characteristics.

Propeller and Kaplan turbines: Component parts, construction and operation of a Kaplan turbine,
differences between the Francis and Kaplan turbines, draft tube – its functions and different forms,
Performance Characteristics.

Section-C

Dimensional Analysis and Model Similitude: Dimensional homogeneity, Rayleigh’s method and
Buckingham’s Pi-theorem, model studies and similitude, dimensionless numbers and their significance.
Unit quantities, specific speed and model relationships for turbines, scale effect, cavitation – its causes,
harmful effects and prevention, Thomas’s cavitation number.

70
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Hydraulic systems: Function, construction and operation of: Hydraulic accumulator, hydraulic
intensifier, hydraulic crane, hydraulic lift and hydraulic press, Hydraulic ram.

Section-D

Centrifugal Pumps: Classification, velocity vector diagrams and work done, hydraulic and manometric
efficiency, vane shape, head capacity relationship and pump losses, pressure rise in impeller, minimum
starting speed, multi-stage pumps, Similarity relations and specific speed, net positive suction head,
cavitation and maximum suctions lift, performance characteristics.

Reciprocating Pumps: Construction and operational details, discharge coefficient, volumetric efficiency
and slip, work and power input, effect of acceleration and friction on indicator diagram (pressure – stroke
length plot) air vessels and their utility. Centrifugal vs. reciprocating pumps.

Text Books:

1. Modi and Seth, Fluid Mechanics and Hydraulic Machines, CBS Publishers.
2. R.K. Bansal, A Text Book of Fluid Mechanics and Hydraulic Machines, Laxmi Publications
(P) Ltd., New Delhi.

Reference Books:

1. Hydraulic Machines: Jagdish Lal, Metropolitan Book Company, New Delhi.


2. Introduction to Fluid Mechanics and Fluid Machines: S.K.Som and G.Biswas, Tata McGraw Hill.
3. Fluid Mechanics and Fluid Power Engineering: D.S.Kumar, S.K.Kataria and Sons.
4. Hydraulic Machines: V.P.Vasandani.
5. Fluid Mechanics and Machinery: Agarwal, Tata McGraw Hill.

71
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – V
MANUFACTURING TECHNOLOGY – II ME – 312

Course Code ME – 312 L-3, T-1, P-0


Name of the Course Manufacturing Technology – II
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A,
B, C & D will have two questions from the respective sections of the syllabus and each section
will carry 20% of the total marks of the semester end examination for the course. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type,
which will cover the entire syllabus and each question will carry 20% of the total marks of the
semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the
questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:

Section-A

Metal Cutting & Tool Forces, Introduction, Basic Tool Geometry, Single point tool nomenclature,
Mechanism of Metal Cutting: Deformation of metal during machining, mechanics of chip formation, built-
up edges, mechanics of orthogonal and oblique cutting, Merchant cutting force circle and shear angle
relationship in orthogonal cutting, surface finish, factors affecting tool forces.

Relationships and Economics of Machining, Relationship of velocity, forces, and power consumption,
cutting speed, feed, and depth of cut. Temperature distribution at tool chip interface. Economics of Metal
Machining, Introduction, Elements of machining cost, tooling economics, machining, optimization.
Numericals.

Section-B

Cutting Tool Materials & Tool Life: Characteristics of tool materials, various types of cutting tool
materials, coated tools, cutting tool selection, Tool life relationship-Tailor equation. Types of tool wear,
tool life, factors governing tool life, Purpose and types of cutting fluids, basic actions of cutting fluids,
selections of cutting fluid, effect of cutting fluid on tool life, Machinability: Definition and evaluation,
Economics of machining, Numericals.

Gear Manufacturing: Introduction, methods of manufacture, Gear generation and forming: Gear cutting
by milling, single point form tool, gear hobbing and shaping, Gear finishing operations: Gear shaving, gear
burnishing, gear grinding, lapping.

72
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-C

Jigs & Fixtures: Principles of Locations, Locating and Clamping devices, Jigs, Bushes, Drilling Jigs, Milling
fixtures, turning fixtures, boring and broaching fixtures, welding fixtures, different materials for jigs and
fixtures, economics of jigs and fixtures.

Press Working Tools & Dynamometry: Introduction, classifications of presses and dies, shear action in
die cutting operations, center of pressure, mathematical calculation of center of pressure, clearances,
cutting forces, punch dimensioning. Need for measuring forces, basic requirements of measuring
techniques, design requirements of dynamometers, 3-divisional turning dynamometer and its calibration,
drill dynamometers.

Section-D

Abrasive Processes: Introduction, grinding wheel-designation and selection, types of grinding machines,
grinding processes, grinding processes parameters, creep feed grinding, honing, lapping, other finishing
processes. Other machine tools: Sawing, Broaching.

Unconventional Machining Processes: Need for Unconventional processes, Types of Unconventional


Machining Processes, USM: Ultrasonic Machining, ECM: Electrochemical Machining, ECG: Electrochemical
Grinding, LBM: Laser Beam Machining their process parameters, Principle of Metal Removal,
Applications, Advantages, and Limitations.

Text Books:

1. Manufacturing Science: Ghosh and Malik, E.W. Press.


2. Manufacturing Technology, Vol.-II: P.N. Rao, Tata McGraw Hill.

REFERENCE BOOKS:

1. Manufacturing Technology: RK. Rajput, Laxmi Publications.


2. Metal cutting principles: Shaw, MIT Press Cambridge.
3. Principles of Machine Tools: F.C.Sen & A.Bhattacharya, Tata McGraw Hill.
4. Modern machining processes: Pandey and Shan, Tata McGraw Hill.
5. Principles of metal cutting: Sen and Bhattacharya, New Central Book.
6. Introduction to Jig and Tool Design: Kempster M.H.A., Hodder & Stoughton.

73
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – V

HEAT TRANSFER ME – 313

Course Code ME – 313 L-3, T-1, P-0


Name of the Course Heat Transfer
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A,
B, C & D will have two questions from the respective sections of the syllabus and each section
will carry 20% of the total marks of the semester end examination for the course. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type,
which will cover the entire syllabus and each question will carry 20% of the total marks of the
semester end examination for the course.

Note: The paper setter will be required to mention a note in the question paper that the use of
steam table, graphical plots and data book is permitted.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the
questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:

Section-A

Steady State Heat Conduction: Introduction, I-D heat conduction through a plane wall, long hollow
cylinder, hollow sphere, Conduction equation in Cartesian, polar and spherical co-ordinate systems.
Steady State Conduction with Heat Generation: Introduction, 1 – D heat conduction with heat sources,
Extended surfaces (fins), Fin effectiveness 2-D heat conduction.

Section-B

Transient Heat Conduction: Systems with negligible internal resistance, Transient heat conduction in
plane wall, cylinders, spheres with convective boundary conditions, Chart solution, Relaxation Method.

Convection: Forced convection – Thermal and hydro-dynamic boundary layers, Equation of continuity,
Momentum and energy equations, some results for flow over a flat plate and flow through tube, Fluid
friction and heat transfer (Colburn analogy), Free convection from a vertical flat plate, Empirical relations
for free convection from vertical and horizontal of planes and cylinders.

Section-C

Thermal Radiation: The Stephen – Boltzmann law, The black body radiation, Shape factors and their
relationships, Heat exchange between non black bodies, Electrical network for radiative exchange in an
enclosure of two or three gray bodies, Radiation shields.

74
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-D

Heat Exchangers: Classification, Performance variables, Analysis of a parallel/counter flow heat


exchanger, Heat exchanger effectiveness.

Heat Transfer with change of Phase: Laminar film Condensation on a vertical plate, Drop-wise
condensation, Boiling regimes, Free convective, Nucleate and film boiling.

Text Books:

1. Fundamentals of Heat and Mass Transfer: Incropera, F.P. & Dewitt, D.P., John Wiley & Sons.
2. Heat and Mass Transfer: Yunus A. Cengel, Tata McGraw Hill.

Reference Books:

1. Heat Transfer: Holman, J.P., John Wiley & Sons, New York.
2. Heat Transfer: Kumar, D.S., Kataria & Sons, Delhi.
3. Heat Mass Transfer: Domkundwar.
4. Conduction Heat Transfer: Arpasi, V.S., Addison-Wesley.
5. Thermal Radiation Heat Transfer: Siegel, R. and J.R.Howell, McGaw Hill.
6. Heat Transmission: W.M., Mc. Adams, McGraw Hill.
7. Heat Transfer, Introduction to Heat Transfer, Som, PHI Learning Private Limited.

75
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – V

MACHINE DESIGN – I ME – 314

Course Code ME – 314 L-4, T-1, P-0


Name of the Course Machine Design – I
Lectures to be 65 (1 Hr Each) (L = 52, T = 13 for each semester)
delivered
Semester End Max. Time: 3 Max. Marks: 100 Min. Pass Marks:
Examination hrs. 40
Continuous Assessment (based on sessional Max. Marks: 50
tests 50%, Tutorials/Assignments 30%,
Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.

Note: The paper setter will be required to mention in the note in the question paper that the
use of Design Data book is permitted.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A
Introduction: To machine design, Design process and Design creativity, types of design, Design
Synthesis, principles of design in aesthetics and ergonomics, standards in design, concurrent
engineering, Mechanical properties of the commonly used Engg. Materials, Basic criteria of
selection of materials, factor of safety under different loading conditions, Concept of tearing,
shearing, crushing, bending etc.

Principles of design: B.I.S. system of designation of steel, B.I.S System of designation of C.I. B.I.S
system of Fits &Tolerances, standardization and interchangeability, Design considerations of
casting, forging and machining, Different types of fluctuating / variable stresses, study of Stress
concentration, concept of fatigue and endurance strength, fatigue design for finite and infinite
life against combined variable stress using Goodman and Soderberg’s Criterion,Design for static
loading, design for manufacture and assembly (DFMA).

Section-B
Shafts and Keys : Design of shafts subjected to twisting moment, bending moment and
combined bending and twisting, shafts subjected to fluctuating loads, design of shafts on basis of
rigidity , design of hollow shafts, flexible shafts, critical speed of shafts, design of different types
of Keys, splines.

76
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-C
Screwed joints: Types of power screws, comparison of square and trapezoidal threads,
efficiency of screws, stresses in screwed fastenings, bolted joints in tension, eccentrically loaded
bolted joints in shear and under combined stresses.

Riveted and welded joints: Methods of riveting, rivet materials, caulking and fullering, design
of rivets for boiler joints, eccentrically loaded riveted joints, WELDS: Design for various loading
conditions in torsion, shear or direct load, eccentrically loaded welded joints.

Section-D
Cotter and knuckle joints: Comparison between keys and cotters, design of socket and spigot
cotter joint, gib and its use, gib and cotter joint, design procedure for knuckle joint.

Pipe joints: Introduction, Stresses in pipes, designing of pipes, hydraulic pipe joint for high
pressures, steam pipes, steam pipe fittings, oil piping.

Text Books:

1. Design of Machine Elements - V.B.Bhandari - Tata McGraw Hill, New Delhi.


2. Machine Design - R.S.Khurmi, J.K. Gupta, S. Chand & Sons.

Reference Books:

1. Machine design - Sharma and Aggrawal, kataria publications.


2. Mechanical Engg. Design - First Metric Editions: Joseph Edward Shigley - McGraw Hill Book
Co.
3. Fundamentals of machine elements - Bernard J. Hamrock, Steven R. Schmid, Bo Jacobson,
McGraw Hill.
4. Design Data Book Compiled by PSG College of Engineering &Technology, Coimbatore.
5. Design Data Book Compiled by Mahadevan.

77
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – V

DYNAMICS OF MACHINES ME - 315

Course Code ME - 315 L-3, T-1, P-0


Name of the Course Dynamics Of Machines
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time = 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Examination
Continuous Assessment (based on sessional Max. Marks: 50
tests (2) 50%, Tutorials/Assignments 30%,
Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.
SYLLABUS:

Section-A

Static and Dynamic Force Analysis: Static force analysis of planar mechanisms, dynamic force analysis
including inertia and frictional forces of planar mechanisms.

Balancing of Rotating Components: Static balance, dynamic balance, balancing of rotating masses, two
plane balancing, graphical and analytical methods, balancing machines.

Section-B

Dynamics of Reciprocating Engines: Engine types, indicator diagrams, gas forces, equivalent masses,
inertia forces, bearing loads in a single cylinder engine, crankshaft torque, engine shaking forces.

Balancing of Reciprocating Parts: Balancing of single cylinder engine, balancing of multi cylinder;
inline, radial and V type engines.

Section-C

Governors: Introduction, types of governors, characteristics of centrifugal governors, gravity controlled


and spring controlled centrifugal governors, hunting of centrifugal governors.

Flywheel: Introduction, Coefficient of fluctuation of energy and speed, design of flywheel – solid disk and
rimmed flywheels.

Section-D
Dynamometers: types of dynamometers, prony brake, rope brake and band brake dynamometers, belt
transmission dynamometer, torsion dynamometer, hydraulic dynamometer.

78
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Gyroscope: precession angular motion and gyroscopic couple and their effects on aeroplane, ship during
steering, rolling and pitching. Stability of four wheel vehicles moving on curved paths.

Text Books:

1. Theory of Mechanisms and Machines: Amitabha Ghosh and Ashok Kumar Mallik, Third
Edition, Affiliated East West Press.
2. Theory of Machines: S.S.Rattan, Tata McGraw Hill.

Reference Books:

1. Theory of Machines and Mechanisms: Joseph Edward Sigley and John Joseph Uicker, Jr. Second
Edition, McGraw Hill.
2. Mechanism and Machine Theory: J.S.Rao and R.V.Dukkipati, Second Edition, New age
International.
3. Theory of Machines: Thomas Beven.
4. Theory of Machines: V.P.Singh, Dhanpat Rai Publications.

79
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – V

FLUID MACHINES LAB. ME – 311 (P)

Course Code ME– 311 (P) L-0, T-0, P-2


Name of the Course Fluid Mechanics Lab
Lectures to be delivered 26 hours of Lab sessions (2 Hrs per week)
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10 Maximum Time: 3 Hrs
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%

INSTRUCTIONS FOR PAPER SETTER/CANDIDATES:

Laboratory examination will consist of two parts:


i) Performing a practical examination assigned by the examiner.
ii) Viva-voce examination.
Viva-voce examination will be related to the practical’s performed/projects executed by the
candidate related to the paper during the course of the semester.

LIST OF EXPERIMENTS:

1. To study the constructional details of a Pelton turbine and draw its fluid flow circuit.
2. To draw the performance characteristics of Pelton turbine constant head, constant speed and
constant efficiency.
3. To study the constructional details of a Francis turbine and draw its fluid flow circuit.
4. To draw the constant head, constant speed and constant efficiency performance characteristics of
Francis turbine.
5. To study the constructional details of a Kaplan turbine and draw its fluid flow circuit.
6. To draw the constant head, speed and efficiency curves for a Kaplan turbine.
7. To study the constructional details of a Centrifugal Pump and draw its characteristic curves.
8. To study the constructional details of a Reciprocating Pump and draw its characteristic curves.
9. To study the constructional details of a Hydraulic Ram and determine its various efficiencies.

80
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – V

MANUFACTURING PRACTICE LAB. ME – 312 (P)

Course Code ME– 312 (P) L-0, T-0, P-2


Name of the Course Manufacturing Practice Lab
Lectures to be delivered 26 hours of Lab sessions (2 Hrs per week)
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10 Maximum Time: 3 Hrs
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%

INSTRUCTIONS FOR PAPER SETTER/CANDIDATES:

Laboratory examination will consist of two parts:


i) Performing a practical examination assigned by the examiner.
ii) Viva-voce examination.
Viva-voce examination will be related to the practical’s performed/projects executed by the
candidate related to the paper during the course of the semester.

LIST OF EXPERIMENTS:

1. To make a pattern for a given casting with all the necessary allowances, parting line, running
system details. Prepare the mould and make the casting. Investigate the casting defects and
suggest the remedial measures.

2. To make a component involving horizontal and vertical welding and study the welding defect and
suggests their remedies.

3. To prepare a job on surface grinder/cylindrical grinder and measure the various parameters of the
finished piece.

4. To cut external threads on a lathe.

5. Manufacture and assembly of a unit consisting of 2 to 3 components to have the concept of


tolerances and fits (shaft and bush assembly or shaft, key and bush assembly or any suitable
assembly).

6. Leveling of machine tools and testing their accuracy.

7. Disassembly and assembly of small assemblies such as tail stock, bench vice, screw jack etc.

8. Development and manufacture of complex sheet metal components such as funnel etc.

9. Multi slot cutting on milling machine by indexing.

10. Drilling and boring of a bush.

81
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – V

HEAT TRANSFER LAB. ME – 313 (P)

Course Code ME– 313 (P) L-0, T-0, P-2


Name of the Course Heat Transfer Lab
Lectures to be delivered 26 hours of Lab sessions (2 Hrs per week)
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10 Maximum Time: 3 Hrs
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%

INSTRUCTIONS FOR PAPER SETTER/CANDIDATES:

Laboratory examination will consist of two parts:


i) Performing a practical examination assigned by the examiner.
ii) Viva-voce examination.
Viva-voce examination will be related to the practical’s performed/projects executed by the
candidate related to the paper during the course of the semester.

LIST OF EXPERIMENTS:

1. To determine the thermal conductivity of a metallic rod.


2. To determine the thermal conductivity of an insulating powder.
3. To determine the thermal conductivity of a solid by the guarded hot plate method.
4. To find the effectiveness of a pin fin in a rectangular duct natural convective condition and
plot temperature distribution along its length.
5. To find the effectiveness of a pin fin in a rectangular duct under forced convective
conditions and plot temperature distribution along its length.
6. To determine the surface heat transfer coefficient for a heated vertical tube under
natural convection and plot the variation of local heat transfer coefficient along the
length of the tube. Also compare the results with those of the correlations.
7. To determine the average heat transfer coefficient for a externally heated horizontal pipe
under forced convection and plot Reynolds and Nusselt numbers along the length of pipe.
Also compare the results with those of the correlations.
8. To measure the emmisivity of the gray body (plate) at different temperature and plot the
variation of emmisivity with surface temperature.
9. To find overall heat transfer coefficient and effectiveness of a heat exchange under
parallel and counter flow conditions. Also plot the temperature distribution in both the
cases along the length of heat of heat exchanger.
10. To verify the Stefen Boltzman constant for thermal radiation.

82
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – V

DYNAMICS OF MACHINES LAB. ME – 315 (P)

Course Code ME– 315 (P) L-0, T-0, P-2


Name of the Course Dynamics of Machines Lab
Lectures to be delivered 26 hours of Lab sessions (2 Hrs per week)
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10 Maximum Time: 3 Hrs
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%

INSTRUCTIONS FOR PAPER SETTER/CANDIDATES:

Laboratory examination will consist of two parts:


i) Performing a practical examination assigned by the examiner.
ii) Viva-voce examination.
Viva-voce examination will be related to the practical’s performed/projects executed by
the candidate related to the paper during the course of the semester.

LIST OF EXPERIMENTS:

1. To perform experiment on Watt and Porter Governors to prepare performance characteristic


curves and to find stability and sensitivity.

2. To perform experiment on Proell Governor to prepare performance characteristic curves and to


find stability and sensitivity.

3. To perform experiment on Hartnell Governor to prepare performance characteristic curves and to


find stability and sensitivity.

4. To study gyroscopic effects through models.

5. To determine gyroscopic couple on motorized gryoscope.

6. To perform the experiment for static balancing on static balancing machine.

7. To perform the experiment for dynamic balancing on dynamic balancing machine.

8. Determine the moment of inertial of connecting rod by compound pendulum method.

83
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Semester –VI
Open Elective
ENERGY ASSESSMENT AND AUDITING - EE-300
Course Code EE-300 L - 3, T- 0, P – 0
Name of Course Energy Assessment and Auditing
Lectures to be delivered 39 (L-39 for each semester)
Semester End Examination MM: 100 Min. Marks; 40 Time Allowed: 3 Hrs.
Continue Assessment (based on sessional tests 50%) Tutorial/ MM: 50.
Assignment: 30%, Quiz/ Seminar: 10 %, Attendance: 10 %.

INSTRUCTIONS:
1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type, which
will cover the entire syllabus. Section A, B, C & D will have two questions from the respective
sections of the syllabus. Each section will have a weightage of 20% of the total marks of the semester
end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the questions in
Section E.
SECTION A
Energy Scenario: Commercial and Non-commercial energy, primary energy resources, commercial
energy production, final energy consumption, energy needs of growing economy, long term energy
scenario, energy pricing, energy sector reforms, energy and environment, energy security, energy
conservation and its importance, re-structuring of the energy supply sector, energy strategy for the
future, air pollution, climate change. Energy Conservation Act- 2001 and its features.
Basics of Energy and its various forms: Electricity basics- DC & AC currents, electricity tariff, load
management and maximum demand control, power factor improvement, selection & location of
capacitors, Thermal Basics-fuels, thermal energy contents of fuel, temperature & pressure, heat
capacity, sensible and latent heat, evaporation, condensation, steam, moist air and humidity & heat
transfer, units and conversion.

SECTION B
Energy Management & Audit: Definition, energy audit, need, types of energy audit. Energy
management (audit) approach-understanding energy costs, bench marking, energy performance,
matching energy use to requirement, maximizing system efficiencies, optimizing the input energy
requirements, fuel & energy substitution, energy audit instruments.
Material and Energy balance: Facility as an energy system, methods for preparing process flow,
material and energy balance diagrams.

SECTION C
Energy Action Planning: Key elements, force field analysis, Energy policy purpose, perspective,
contents, formulation, ratification, Organizing - location of energy management, top management
support, managerial function, roles and responsibilities of energy manager, accountability.
Motivating-motivation of employees: Information system-designing barriers, strategies; Marketing and
communicating-training and planning.

Financial Management: Investment-need, appraisal and criteria, financial analysis techniques-simple


pay back period, return on investment, net present value, internal rate of return, cash flows, risk and
sensitivity analysis; financing options, energy performance contracts and role of ESCOs.

84
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SECTION D
Project Management: Definition and scope of project, technical design, financing, contracting,
implementation and performance monitoring. Implementation plan for top management, Planning
Budget, Procurement Procedures, Construction, Measurement & Verification.

Energy Monitoring, Targeting and Global environmental concerns: Defining monitoring &
targeting, elements of monitoring & targeting, data and information-analysis, techniques -energy
consumption, production, cumulative sum of differences (CUSUM). United Nations Framework
Convention on Climate Change (UNFCC), sustainable development, Kyoto Protocol, Conference of
Parties (COP), Clean Development Mechanism (CDM), Prototype Carbon fund (PCF).

TEXT BOOKS:
1. L.C. Witte, P.S. Schmidt, D.R. Brown, “Industrial Energy Management and Utilisation”
Hemisphere Publ, Washington, 1988.
2. O. Callaghn, P.W. “Design and Management for Energy Conservation”, Pergamon Press, Oxford.

REFERENCE BOOKS:
1. I.G.C. Dryden, “The Efficient Use of Energy” Butterworths, London.
2. W.C. turner, “Energy Management Hand book” Wiley, New York.
3. W.R. Murphy and G. Mc KAY “Energy Management” Butterworths, London.
4. Handbook of Energy Audits by Albert Thuman – Fairman Press Inc.
5. Energy basis for man and nature by Howard T.Odum & Elisbeth. C. Odum.

85
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

TOTAL QUALITY MANAGEMENT - ME-300

Course Code ME-300 L - 3, T- 0, P – 0


Name of Course Total Quality Management
Lectures to be delivered 39 (L-39 for each semester)
Semester End Examination MM: 100 Min. Marks; 40 Time Allowed: 3 Hrs.
Continue Assessment (based on sessional tests 50%) Tutorial/ MM: 50.
Assignment: 30%, Quiz/ Seminar: 10 %, Attendance: 10 %.

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type, which
will cover the entire syllabus. Section A, B, C & D will have two questions from the respective
sections of the syllabus. Each section will have a weightage of 20% of the total marks of the semester
end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the questions in
Section E.
SECTION A
Introduction - Need for quality - Evolution of quality - Definition of quality - Dimensions of
manufacturing and service quality - Basic concepts of TQM - Definition of TQM – TQM Framework -
Contributions of Deming, Juran and Crosby – Barriers to TQM.
Quality Control and Improvement Tools: Check Sheet, Histogram, Pareto Chart, Cause and Effect
diagram, Scatter diagram, Control chart, Graph, Affinity diagram, Tree diagram, Matrix diagram,
Process decision program chart, Arrow diagram, Acceptance Sampling, Process capability studies,
Zero defect program (POKA-YOKE).

SECTION B
TQM PRINCIPLES: Leadership – Strategic quality planning, Quality statements - Customer focus –
Customer orientation, Customer satisfaction, Customer complaints, Customer retention - Employee
involvement – Motivation, Empowerment, Team and Teamwork, Recognition and Reward,
Performance appraisal – Continuous process improvement – PDSA cycle, 5s, Kaizen - Supplier
partnership – Partnering, Supplier selection, Supplier Rating.

SECTION C
TQM TOOLS & TECHNIQUES: The seven traditional tools of quality – New management tools –
Six-sigma: Concepts, methodology, applications to manufacturing, service sector including IT – Bench
marking – Reason to bench mark, Bench marking process – FMEA – Stages, Types. Quality circles –
Quality Function Deployment (QFD) – Taguchi quality loss function – TPM – Concepts, improvement
needs – Cost of Quality – Performance measures.

SECTION D
Quality Management System & Quality Audit: Quality Systems, Quality management principles,
ISO-9000:2000, ISO 9001 : 2000, ISO 14000, Future of quality system audit, Audit objectives, types
of quality audit, Quality Auditor, Audit performance. Case studies of TQM implementation in
manufacturing and service sectors including IT.

TEXT BOOKS:
1. Dale H. Besterfiled, et at., “Total Quality Management”, Pearson Education Asia, 3rd Edition,
Indian Reprint.
2. Ross, J.E.: Total Quality Management, Vanity Books International.

86
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

REFERENCE BOOKS:
1. James R. Evans and William M. Lindsay, “The Management and Control of Quality”, South-
Western (Thomson Learning).
2. Oakland, J.S., “TQM – Text with Cases”, Butterworth – Heinemann Ltd., Oxford.
3. Suganthi,L and Anand Samuel, “Total Quality Management”, Prentice Hall (India)Pvt. Ltd.
4. Janakiraman, B and Gopal, R.K, “Total Quality Management – Text and Cases”, Prentice Hall
(India) Pvt. Ltd.
5. Goetsch, D.L. & Davis,S. : Introduction to Total Quality, Prentice Hall.
6. Juran, J.M. & Gryna, F.M. : Quality Planning and Analysis, Tata McGraw Hill Publishing Co. Ltd.,
New Delhi
7. Charantimath, P.M. : Total Quality Management, Pearson Education.

87
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

OPTIMIZATION METHODS FOR ENGINEERING SYSTEMS - NS-300

Course Code NS-300 L - 3, T- 0, P – 0


Name of Course Optimization Methods For Engineering Systems
Lectures to be delivered 39 (L-39 for each semester)
Semester End Examination MM: 100 Min. Marks; 40 Time Allowed: 3 Hrs.
Continue Assessment (based on sessional tests 50%) Tutorial/ MM: 50.
Assignment: 30%, Quiz/ Seminar: 10 %, Attendance: 10 %.

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type, which
will cover the entire syllabus. Section A, B, C & D will have two questions from the respective
sections of the syllabus. Each section will have a weightage of 20% of the total marks of the semester
end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the questions in
Section E.

SECTION A
Introduction: Engineering Application; Statement of the Optimal Problem; Classification;
Optimization Techniques;
Classical Method: Single Variable Optimization; Multivariable Optimization Without any Constraints
with Equality and Inequality Constraints.

SECTION B
One-Dimensional Minimization Method: Unimodal Function; Elimination Method – Dichotomous
Search, Fibonocci and Golden Method; Interpolation Method – Quadratic and Cubic Interpolation
Method.
Unconstrained Minimization Method: Univariate, Conjugate Directions, Gradient And Variable
Metric Method.

SECTION C
Constrained Minimization Method: Characteristics of a constrained problem; Direct Method of
feasible directions; Indirect Method of interior and exterior penalty functions.
Geometric Programming: Formulation and Solutions of Unconstrained and Constrained geometric
programming problem.

SECTION D
Dynamic Programming: Concept of Sub-optimization and the principal of optimality: Calculus,
Tabular and Computational Method in Dynamic Programming: An Introduction to Continuous
Dynamic Programming.
Integer Programming: Gomory’s Cutting Plane Method for Integer Linear Programming;
Formulation & Solution of Integer Polynomial and Non- Linear problems.

TEXT BOOKS:
1. Optimization (Theory & Application)- S.S. Rao, Wiley Eastern Ltd, New Delhi.
2. Optimization Concepts and Applications in Engineering – Ashok D.Belegundu and Tirupathi R
Chandrupatla – Pearson Education 1999, First India Reprint 2002.

88
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

REFERENCE BOOKS:
1. Optimization: Theory and Practice, C.S.G. Beveridge and R.S. Schechter, McGraw Hill, New York.
2. Kalyanamoy Deb, “Optimization for Engineering design algorithms and Examples”, Prentice Hall
of India Pvt. Ltd. 2006.
3. Rao, Singaresu, S., “Engineering Optimization – Theory & Practice”, New Age International (P)
Limited, New Delhi, 2000.
4. Johnson Ray, C., “Optimum design of mechanical elements”, Wiley, John & Sons, 1990.
5. Goldberg, D.E., “Genetic algorithms in search, optimization and machine”, Barnen, Addison-
Wesley, New York, 1989.

89
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

REMOTE SENSING AND GIS- CE-300

Course Code CE-300 L - 3, T- 0, P – 0


Name of Course Remote Sensing and GIS
Lectures to be delivered 39 (L-39 for each semester)
Semester End Examination MM: 100 Min. Marks; 40 Time Allowed: 3 Hrs.
Continue Assessment (based on sessional tests 50%) Tutorial/ MM: 50.
Assignment: 30%, Quiz/ Seminar: 10 %, Attendance: 10 %.

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type, which
will cover the entire syllabus. Section A, B, C & D will have two questions from the respective
sections of the syllabus. Each section will have a weightage of 20% of the total marks of the semester
end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the questions in
Section E.

SECTION A
EMR AND ITS INTERACTION WITH ATMOSPHERE & EARTH MATERIAL: Definition of
remote sensing and its components – Electromagnetic spectrum – wavelength regions important to
remote sensing – Wave theory, Particle theory, Stefan-Boltzman and Wein’s Displacement Law –
Atmospheric scattering, absorption – Atmospheric windows – spectral signature concepts – typical
spectral reflective characteristics of water, vegetation and soil.
PLATFORMS AND SENSORS: Types of platforms – orbit types, Sun-synchronous and
Geosynchronous – Passive and Active sensors – resolution concept – Pay load description of important
Earth Resources and Meteorological satellites – Airborne and spaceborne TIR and microwave sensors.

SECTION B
IMAGE INTERPRETATION AND ANALYSIS: Types of Data Products – types of image
interpretation – basic elements of image interpretation - visual interpretation keys – Digital Image
Processing – Pre-processing – image enhancement techniques – multispectral image Classification –
Supervised and unsupervised.

SECTION C
GEOGRAPHIC INFORMATION SYSTEM: Introduction – Maps – Definitions – Map Projections –
types of map projections – map analysis – GIS definition – basic components of GIS – standard GIS
softwares – Data type – Spatial and non-spatial (attribute) data – measurement scales – Data Base
Management Systems (DBMS).

SECTION D
DATA ENTRY, STORAGE AND ANALYSIS: Data models – vector and raster data – data
compression – data input by digitization and scanning – attribute data analysis – integrated data
Analysis – Modeling in GIS Highway alignment studies – Land Information System.

90
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

TEXT BOOKS:
1. Lillesand, T.M., Kiefer, R.W. and J.W. Chipman. (2004). Remote Sensing and Image Interpretation.
V Edn. John Willey and Sons (Asia) Pvt. Ltd., New Delhi.
2. Anji Reddy, M. (2001). Textbook of Remote Sensing and Geographical Information System.
Second edn. BS Publications, Hyderabad.

REFERENCE BOOKS:

1. Lo. C.P. and A.K.W. Yeung (2002). Concepts and Techniques of Geographic Information Systems.
Prentice-Hall of India Pvt. Ltd., New Delhi.
2. Peter A. Burrough, Rachael A. McDonnell (2000), Principles of GIS. Oxford University Press.
3. Ian Heywood (2000), An Introduction to GIS, Pearson Education Asia.

91
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

OPERATING SYSTEMS- CS-300

Course Code CS-300 L - 3, T- 0, P – 0


Name of Course Operating Systems
Lectures to be delivered 39 (L-39 for each semester)
Semester End Examination MM: 100 Min. Marks; 40 Time Allowed: 3 Hrs.
Continue Assessment (based on sessional tests 50%) Tutorial/ MM: 50.
Assignment: 30%, Quiz/ Seminar: 10 %, Attendance: 10 %.

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type, which
will cover the entire syllabus. Section A, B, C & D will have two questions from the respective
sections of the syllabus. Each section will have a weightage of 20% of the total marks of the semester
end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the questions in
Section E.
SECTION A
Introduction to System Software: Overview of all system software’s: Compiler, Assembler, Linker,
Loader, Operating system, I/O manager
Fundamentals of Operating System: OS services and Components, Multitasking,
Multiprogramming, Multiprocessing, Time Sharing, Buffering, Spooling, Distributed OS

SECTION B
Process and Thread Management: Concept of process and threads, Process states, Process
management, Context switching, Interaction between processes and OS Multithreading
Example OS : Linux
Concurrency Control: Concurrency and Race Conditions, Mutual exclusion requirements, Software
and hardware solutions, Semaphores, Monitors, Classical IPC problems and solutions, Deadlock,
Characterization, Detection, Recovery, Avoidance and Prevention

SECTION C
Memory Management: Memory partitioning, Swapping, Paging, Segmentation, Virtual, memory,
Overlays, Demand paging, Performance of Demand paging, Virtual memory concepts, Page
replacement algorithms, Allocation algorithms, Example OS : Linux
I/O Systems: Secondary-Storage Structure, Disk structure, Disk scheduling, Disk management, Swap-
space management, Disk reliability, Stable storage implementation, Introduction to clock, Clock
hardware, Clock software
SECTION D
File systems: File concept, File support, Access methods, Allocation methods, Directory Systems, File
protection, Free space management, Example OS : Linux

Protection & Security: Protection, Goals of protection, Domain of protection, Access matrix,
Implementation of access matrix, Revocation of access rights, Security, The security problem,
Authentication, One-Time passwords, Threats, Example OS: Linux Case Study: Android OS

92
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

TEXT BOOKS:
1. Operating System Concepts by Silberschatz and Galvin, Wiley.
2. Operating Systems Achyut S. Godbole Tata McGraw Hill

REFERENCE BOOKS:
1. Operating Systems – Internals and Design Principles, by William Stallings, Prentice Hall.
2. Modern Operating Systems by Andrew S Tanenbaum, Prentice Hall India.
3. Operating Systems by Gary Nutt, Nabendu Chaki, Sarmishtha Neogy, Pearson
4. Operating Systems Design & Implementation Andrew S. Tanenbam, Albert S. Woodhull Pearson
5. Operating Systems D. M. Dhardhere Tata McGraw Hill

93
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER - VI

MEASUREMENT AND CONTROL ME – 322

Course Code ME – 322 L-3, T-1, P-0


Name of the Course Measurement and Control
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A
General Concept: Need and classification of measurements and instruments, basic and auxiliary
functional elements of a measurement system, Mechanical versus electrical/electronic instruments,
primary, secondary and working standards.

Static and Dynamic characteristics of Instruments: Range and span, accuracy and precision,
calibration, hysteresis and dead zone, sensitivity and linearity, threshold and resolution: speed of
response, lag, fidelity and dynamic error, dead time and dead zone. Zero, first and second order systems
and their response to step, ramp and sinusoidal input signals. Error in Measurement: Sources of errors,
systematic and random errors: Statistical analysis of test data.

Section-B
Functional Elements: Review of Electro-mechanical sensors and transducers – variable resistance,
inductance and capacitive pickups, photo cells and piezo-electric transducers, and application of these
elements for measurement of position/displacement, speed/velocity/acceleration, force and liquid level
etc.

Resistances strain gauges, gauge factor, bonded and unbonded gauges, surface preparation and bonding
technique, signal conditioning and bridge circuits, temperature compensation, Application of strain
gauges for direct, bending and torsional loads.

Section-C
Pressure and Flow Measurement: Bourdon tube, diaphragm and bellows, vacuum measurement –
Mecleod gauge, thermal conductivity gauge and ionisation gauge, Dead weight gauge tester.
Electromagnetic flux meters, ultra-sonic flow meters and hot wire anemometer: Flow visualisation
technique.

Temperature Measurement: Thermal expansion methods – bimetallic thermometers, liquid-in-glass


thermometer and filled-in-system thermometers, thermo-electric sensors-common thermo couples,

94
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

reference junction considerations, special materials and configurations: metal resistance thermometers
and thermistors; optical and radiation pyrometers, calibration, standards.

Section-D
Speed, Force, Torque and Shaft Lower Measurement: Mechanical tachometers, vibration and
tachometer and stroboscope; proving ring, hydraulic a pneumatic load cells, torque on rotating shafts,
absorption, transmission and driving dynamometers.

Controls: Control system-open and closed loop system; elements of a control system; servo mechanism
process control and regulators, transfer function; block diagram and overall transfer function of a multi
loop control system, signal flow graph and Mason’s Rule system stability – Routh and Harwitz criteria
stability; Time and frequency domain Nyquist plot for stability study.

Text Books:

1. Measurement system: Application and Design by Doebelin E.O., McGraw Hill.


2. Mechanical Measurement and Control by Kumar D.S., Metropolitan Book Co. Pvt. Ltd., New Delhi.

Reference Books:

1. Experimental Method for Engineers by Holman J.P., McGraw Hill Publication Company.
2. Automatic Control System by Kuo B.C., Prentice Hall of India.

95
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VI

INDUSTRIAL ENGINEERING AND PRODUCTION MANAGEMENT ME – 323

Course Code ME – 323 L-3, T-1, P-0


Name of the Course Industrial Engineering and Production Management
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A
Basic Concepts of Industrial Engineering: Definition, Objectives, Method study, Principle of
motion economy, Techniques of method study - Various charts, THERBLIGS, Work measurement
- various methods, Time Study - PMTS, determining time, Work sampling, Numerical Problems.

Productivity and Workforce: Productivity - Definition, Various methods of measurement,


Factors effecting productivity, Strategies for improving productivity, Various methods of Job
evaluation & merit rating, Various incentive payment schemes, Behavioral aspects, Financial
incentives.
Section-B
Information Management: MIS, Importance of MIS, Organizational & information system
structure, Role of MIS in decision making.

Manufacturing Cost Analysis: Fixed & variable costs, Direct, indirect & overhead costs, & Job
costing, Recovery of overheads, Standard costing, Cost control, Cost variance Analysis - Labour,
material, overhead in volume, rate & efficiency, Break even Analysis, Marginal costing &
contribution, Numerical Problems.
Section-C
Materials Management: Strategic importance of materials in manufacturing industries,
Relevant costs, Inventory control models - Economic order quantity (EOQ), Economic batch
quantity (EBQ) with & without shortage, Purchase discounts, Sensitivity analysis, Inventory
control systems - P,Q,Ss Systems, Service level, Stock out risk, determination of order point &
safety stock, Selective inventory control - ABC, FSN, SDE, VED and three dimensional, Numerical
Problems.

96
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-D

Sales Forecasting: Importance, Objectives, Forecasting and Prediction, Types, Classification of


Forecasting Methods, Forecast Errors, Costs and Accuracy of Forecasts, Numerical Problems.

Production Planning & Control (PPC): Objectives & variables of PPC, Aggregate planning -
Basic Concept, its relations with other decision areas, Decision options - Basic & mixed
strategies, Master production schedule (MPS), Scheduling Operations Various methods for line &
intermittent production systems, Gantt chart, Sequencing - Johnson algorithm for n-Jobs-2
machines, n- Jobs-3 machines, 2 Jobs n-machines, n-Jobs m-machines Various means of
measuring effectiveness of PPC, Introduction to JIT, Numerical Problems.

Text Books:

1. Production & Operations Management - Chary, Tata McGraw Hill, New Delhi.
2. Management Information Systems - Sadagopan, Prentice Hall of India, New Delhi.

Reference Books:

1. Modern Production Management - S.S. Buffa, John Wiley.


2. Operations Management - Schroeder, McGraw Hill.
3. Operation Management - Monks, McGraw Hill.
4. Production & Operations Management - Martinich, John Wiley.
5. Industrial & Systems Engineering - Turner, Mize, Chase, Prentice Hall of India.
6. Industrial Engineering & Operations Management - S.K. Sharma, S.K. Kataria & Sons.
7. Industrial Engineering - Ravi Shankar, Galgotia Publications.

97
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VI

MACHINE DESIGN-II ME – 324

Course Code ME – 324 L-4, T-1, P-0


Name of the Course Machine Design-II
Lectures to be delivered 65 (1 Hr Each) (L = 52, T = 13 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A,
B, C & D will have two questions from the respective sections of the syllabus and each section
will carry 20% of the total marks of the semester end examination for the course. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type,
which will cover the entire syllabus and each question will carry 20% of the total marks of the
semester end examination for the course.

Note: The paper setter will be required to mention in the note in the question paper that the use
of Design Data book is permitted.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the
questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A
Sliding contact Bearings: Functions, classification, Selection of bearing type, types of
lubrication – Boundary, mixed and hydrodynamic lubrication, properties of lubricants, oil
grooves, hydrostatic bearings, gas bearings, bearing characteristic number, critical pressure and
heat generation in journal bearing, design procedure of journal bearing, Reynolds’s equation,
design of pivot and collar bearing.

Rolling contact bearings: Classification, basic static load rating, basic dynamic load rating,
static equivalent load, dynamic equivalent load, load life relationship, reliability, material and
manufacture of ball and roller bearings, selection of bearing from manufacturer’s catalogue,
bearing failure, lubrication of rolling bearings.

Section-B
Drives: Design of belt, rope and chain drives.

Gears: Classification, Selection of gears, terminology of gears, selection of material for gears, law
of gearing, forms of gear teeth, interference and undercutting, beam and wear strength of gear
tooth- Lewis equation, form or Lewis factor for gear tooth, causes of gear tooth failures, Dynamic
load on gear- Buckingham equation, force analysis and design of spur, helical, bevel & worm
gears including the consideration for maximum power transmitting capacity, Gear Lubrication.

98
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-C

Springs: Types of springs, Design for helical springs against tension, compression and
fluctuating loads, Design of leaf springs, nipping, Surging phenomenon in springs.

Friction clutches: Torque transmitting capacity, multi-disc clutches friction materials, cone
clutches, centrifugal clutches, thermal considerations.

Section-D

Design of IC engines parts: Design of cylinder, piston, connecting rod and crankshaft.

Design of Crane Hook.

Text Books:

1. Design of Machine Elements: V.B.Bhandari , Tata McGraw Hill, New Delhi.


2. Machine Design: R.S.Khurmi, J.K. Gupta, S. Chand & Sons.

Reference Books:

1. Machine design: Sharma and Aggrawal, kataria publications.


2. Mechanical Engg. Design: First Metric Editions: Joseph Edward Shigley, McGraw Hill Book
Co.
3. Fundamentals of Machine Elements: Bernard J. Hamrock, Steven R. Schmid, Bo Jacobson,
McGraw Hill.
4. Design Data Book Compiled by PSG College of Engineering &Technology, Coimbatore.
5. Design Data Book Compiled by Mahadevan.

99
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VI

INTERNAL COMBUSTION ENGINES ME – 325

Course Code ME – 325 L-3, T-1, P-0


Name of the Course Internal Combustion Engines
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A,
B, C & D will have two questions from the respective sections of the syllabus and each section
will carry 20% of the total marks of the semester end examination for the course. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type,
which will cover the entire syllabus and each question will carry 20% of the total marks of the
semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the
questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A

Introduction: I.C.Engines and their classification, Piston – Cylinder Arrangement and Related Terms,
parts and their functions, Cycle of operation of four stroke and two stroke Engines, Applications. Analysis
of Air Standard Otto, Diesel and Dual Cycles, Air Standard Efficiency and Mean Effective Pressure,
Deviation of Actual Engine Cycle from Ideal Cycle, Valve Timing Diagrams for I.C.Engines.

Two Stroke Engines: Principle of working, Scavenging and Scavenging Methods, Port Timing Diagram,
Merits and Demerits, Applications, Comparison with Four Stroke Engines.

Section-B

Carburetion and Fuel Ignition Systems: Purpose, Main Requirements and Principle of a Carburetor,
Constructional and Operational Details of a Single jet Carburetor, Compensating Devices, Salient Features
and Comparative Merits/Demerits of Battery Ignition system and Magneto Ignition System, Timings and
Spark Advance, Introduction to Basic Electronic Petrol Injection System, and Multipoint Fuel Injection
System.

Fuel Injection in CI Engines: Requirements of Diesel Fuel Injection System, Air Injection and Airless
Injection systems, constructional and Operational Details of Fuel Pump and Fuel Atomizer.

Section-C

Combustion Process: Stages of combustion in S.I.Engines, Flame Ignition and Propagation, Effect of
Engine Variables on Flame Speed, Pre-Ignition and Detonation, Engine Variables Affecting Detonation,
Theories of Detonation, Highest Useful Compression Ratio and Octane Rating of Fuels. Combustion in CI
Engines, Effect of Operating Variables on Delay Period and Diesel Knock, Comparison between Knocking
in SI and CI Engines, Rating of Diesel Fuel – Cetane Number and Diesel Index.

100
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Cooling and Lubrication Systems: Need for Cooling, Classification of Cooling Systems – Thermo System,
Radiator and Air-Cooling Systems. Function of a Lubricating System, Splash and Pressure Lubrication
System, Wet and Dry Sump Lubrications, Lubrication of different Engine Parts, S.A.E. Rating of Lubricants.

Section-D

Engine Testing and Performance: Purpose of Testing, Performance Parameters: Brake Power, Indicated
Power, Mechanical Efficiency, Fuel and Air Consumption. Thermal Efficiency and Specific Fuel
consumption. Heat balance Calculations and Performance Maps. Supercharging: Objective, Effects and its
limits in SI and CI Engines, Numerical Problems.

Engine Pollution and Alternative Fuels: Pollutants from SI and CI Engines, Methods of Emission
Control, Alternate Fuels – Alcohol, LPG, Hydrogen, CNG, Biogas, Relative Merits and Demerits of these
Fuels.

Text Books:

1. Internal Combustion Engines Fundamentals - John Heywood, McGraw Hill.


2. Internal Combustion Engines - V.Ganeshan, Tata McGraw Hill.

Reference Books:

1. Internal Combustion Engines - Mathur and Sharma, Dhanpat Rai and Sons.
2. Internal Combustion Engines - Romalingum, Scitech Publication.
3. IC Engines - Maleev, McGraw Hill.
4. Mechanics of Automotive Engines - Srockan.
5. Internal Combustion Engines, Engineering Fundamentals of the Internal Combustion Engine,
2nd Edition by Pulkrabek, PHI Learning Private Limited.

101
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VI

MATERIALS TECHNOLOGY ME – 326

Course Code ME – 326 L-4, T-0, P-0


Name of the Course Materials Technology
Lectures to be delivered 52(1 Hr Each) (L = 52 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests 50%, Max. Marks: 50
Tutorials/Assignments 30%, Quiz/Seminar 10%,
Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A

Materials: Resources and Their Implications, Materials and Engineering, Engineering Materials and
Selected Applications

Solid Solutions and Phase diagram: Introduction to single and multiphase solid solutions and types of
solid solutions,Importance and objectives of phase diagram, systems, phase and structural constituents,
cooling curves, unitary & binary phase diagrams, Gibb’s phase rule, Lever rule, eutectic and eutectoid
systems, peritectic and peritectoid systems, iron carbon equilibrium diagram and TTT diagram.

Section-B

Heat Treatment: Principles, purpose, classification of heat treatment processes, annealing normalizing,
stress relieving, hardening, tempering, carburizing, nitriding, cyaniding, flame and induction hardening.
Allotropic transformation of iron and steel, properties of austenite, ferrite, pearlite, martensite.

Deformation of Metals: Elastic and plastic deformation, mechanism of plastic deformation, twining;
conventional and true stress strain curves for polycrystalline materials, yield point phenomena, strain
hardening, age hardening work hardening, Bauschinger effect, season cracking. Recovery, re-
crystallization and grain growth. Mechanical

Section-C

Mechanical Behavior of Materials: Types of Polymers, Ceramics, Composites, and Glasses, Mechanical
Behavior of Polymers, Ceramics, Composites, and Glasses, Mechanical Testing of Materials.

Alloys and alloying elements: Effect of various alloying elements on the mechanical properties.
Properties of important alloys used in mechanical engineering practice.

102
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-D

Failures of metals: Failure analysis, fracture- process & its types and their characteristics, Brittle
fracture theories, Cleavage fracture, Methods to improve fracture strength, fatigue, characteristics of
fatigue, S-N curve, fatigue limit, mechanism of fatigue, factor affecting fatigue, Miner’s law, simple
numerical problems on fatigue.

Creep & Corrosion: Definition and concept, creep curve, mechanism of creep, impact of time and
temperature on creep, creep fracture, creep testing and prevention against creep. Corrosion: Mechanism
and effect of corrosion, prevention of corrosion.

Text Books:

1. Elements of Material Science and Engineering: VanVlack, Pearsons Education.


2. Material Science & Engineering: V. Raghvan, Prentice Hall of India Pvt. Ltd, New Delhi.

Reference Books:

1. Material Science and Engineering-An Introduction: Callister W.D., John Wiley & Sons. Delhi.
2. A Text Book of Material Science & Metallurgy: O.P. Khanna, Dhanpat Rai & Sons.
3. Engineering Materials: Kenneth G. Budinski, Prentice Hall of India, New Delhi.

103
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VI

MEASUREMENT AND CONTROL LAB. ME – 322 (P)

Course Code ME–322 (P) L-0, T-0, P-2


Name of the Course Measurement and Control lab.
Lectures to be delivered 26 hours of Lab sessions (2 Hrs per week)
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10 Maximum Time: 3 Hrs
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%

INSTRUCTIONS FOR PAPER SETTER/CANDIDATES:

Laboratory examination will consist of two parts:


i) Performing a practical examination assigned by the examiner.
ii) Viva-voce examination .
Viva-voce examination will be related to the practical’s performed/projects executed by the
candidate related to the paper during the course of the semester.

LIST OF EXPERIMENTS:

1. Calibration of pressure-gauge with the help of a dead weight gauge tester.


2. Use of the engine indicator for recording the cylinder pressure against cylinder volume.
3. Preparation of a thermocouple for measurement of temperature and a study of the use of
potentiometer in temperature measurement with the help of a thermocouple.
4. Use of a tachometer and stroboscope for measurement of speed of a shaft.
5. Measurement of torque with the help of an absorption dynamometer.
6. Study of the use of a strain gauge for displacement measurement.
7. Measurement of flow with the help of obstruction meters.
8. Use of Pitot tube to plot the velocity profile of a fluid flow through a duct.

104
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER –VI

I.C.ENGINES LAB. ME – 325 (P)

Course Code ME–325 (P) L-0, T-0, P-2


Name of the Course I.C.Engines lab.
Lectures to be delivered 26 hours of Lab sessions (2 Hrs per week)
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10 Maximum Time: 3 Hrs
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%

INSTRUCTIONS FOR PAPER SETTER/CANDIDATES:

Laboratory examination will consist of two parts:


i) Performing a practical examination assigned by the examiner.
ii) Viva-voce examination.
Viva-voce examination will be related to the practical’s performed/projects executed by the
candidate related to the paper during the course of the semester.

LIST OF EXPERIMENTS:

1. To study the constructional details and working principles of two-stroke/four stroke petrol engine.
2. To study the constructional details and working of two-stroke/four stroke diesel engine.
3. To prepare heat balance sheet on multi-cylinder diesel engine/petrol engine.
4. To find the Indicated Power (IP) on multi-cylinder petrol engine/diesel engine by Morse Test.
5. To find FP of a multi-cylinder diesel engine/petrol engine by Willian’s line method and by motoring
method.
6. To prepare variable speed performance test of a multi-cylinder/single cylinder petrol engine/diesel
engine and prepare the curves (i) BP, IP, FP, vs speed. (ii) Volumetric Efficiency and Indicated
Specific Fuel Consumption vs speed.
7. To perform constant speed performance test on a single cylinder/multi cylinder diesel engine and
draw curves of (i) BP vs fuels rate, air rate and A/F and (ii) BP vs. mech efficiency and bsfc.
8. To measure CO & Hydrocarbons in the exhaust of 2 stroke / 4 stroke petrol engine.
9. To find intensity of smoke from a single cylinder / multicylinder diesel engine.

105
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER –VI

MATERIALS TECHNOLOGY LAB. ME – 326 (P)

Course Code ME–326 (P) L-0, T-0, P-2


Name of the Course Materials Technology Lab.
Lectures to be delivered 26 hours of Lab sessions (2 Hrs per week)
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10 Maximum Time: 3 Hrs
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%

INSTRUCTIONS FOR PAPER SETTER/CANDIDATES:

Laboratory examination will consist of two parts:


i) Performing a practical examination assigned by the examiner.
ii) Viva-voce examination.
Viva-voce examination will be related to the practical’s performed/projects executed by the
candidate related to the paper during the course of the semester.

LIST OF EXPERIMENTS:

1. To study microstructures of metals/ alloys.


2. To study the properties of various types of plastics.
3. To study thermo-setting of plastics.
4. To study Bravais lattices with the help of models.
5. To study crystal structures and crystals imperfections using ball models.
6. To prepare solidification curve for a given specimen.
7. To perform and study heat treatment processes (annealing, normalising, hardening and tempering)
of steel specimen and measure the difference in hardness.
8. To observe and study microstructure of heat-treated steel.
9. To perform creep testing and observe the creep behaviour of a given specimen.
10. To observe and study the mechanism of chemical corrosion and its protection.

106
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VII
MODERN MANUFACTURING PROCESSES ME – 411 (a)

Course Code ME – 411 (a) L-3, T-0, P-0


Name of the Course Modern Manufacturing Processes
Lectures to be 39 (1 Hr Each) (L = 39 for each semester)
delivered
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)
INSTRUCTIONS:
1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A, B, C & D
will have two questions from the respective sections of the syllabus and each section will carry 20% of the
total marks of the semester end examination for the course. Section E will be compulsory, it will consist of a
single question with 10-20 subparts of short answer type, which will cover the entire syllabus and each
question will carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question from each
of the sections A, B, C & D of the question paper and all the subparts of the questions in Section E. Use of
non-programmable calculators is allowed.

SYLLABUS:
Section-A
Introduction: Definition, Classification of Modern Manufacturing Processes, Need of modern
manufacturing processes vs. Conventional manufacturing processes.
Ultrasonic Machining – Elements of process, cutting tool system design, effect of parameters, economic
considerations, applications, limitation of the process, advantages and disadvantages.
Section-B
Abrasive Jet Machining – Variables in AJM, metal removal rate in AJM. Water Jet Machining – Jet cutting
equipments, process details, advantages and applications.
Electrochemical and Chemical Metal Removal Processes: Electrochemical Machining – Elements of
ECM process, tool work gap, chemistry of the process, metal removal rate, accuracy, surface finish and
other work material characteristics, economics, advantages, applications, limitations. Electrochemical
grinding – Material removal, surface finish, accuracy, advantages, applications.
Section-C
Electric Discharge Machining (EDM): EDM of spark erosion machining processes, mechanism of metal
removal, spark erosion generators, electrode feed control, dielectric fluids, flushing, electrodes for spark
erosion, selection of electrode material, tool electrode design, surface finish, machining accuracy, machine
tool selection, applications. Wire cut EDM.
Laser beam machining (LBM) – Apparatus, material removal, cutting speed and accuracy of cut,
metallurgical effects, advantages and limitations.
Section-D
Plasma arc Machining (PAM): Plasma, non thermal generation of plasma, mechanism of metal removal,
PAM parameters ,equipments for D.C.plasma torch unit, safety precautions, economics, other applications
of plasma jets.
Electron beam Machining (EBM): Generations and control electron beam, theory of electronic beam
machining, process capabilities and limitations.
Text Books:
1. Modern Machining Processes – P.C.Pandey, H.S.Shan, Tata McGraw Hill.
2. Machining Manufacturing Science – Ghosh and Malik, Affiliated East – West Press.

Reference Books:
1. Non Traditional Manufacturing Processes – Benedict G.F.Macel Dekker.
2. Advanced Methods of Machining – Mc Geongh J.A., Chapman and Hall.

107
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VII
CRYOGENIC ENGINEERING ME-411 (b)

Course Code ME – 411 (b) L-3, T-0, P-0


Name of the Course Cryogenic Engineering
Lectures to be 39 (1 Hr Each) (L = 39 for each semester)
delivered
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)
INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A, B,
C & D will have two questions from the respective sections of the syllabus and each section will
carry 20% of the total marks of the semester end examination for the course. Section E will be
compulsory, it will consist of a single question with 10-20 subparts of short answer type, which will
cover the entire syllabus and each question will carry 20% of the total marks of the semester end
examination for the course.
2. For candidates: Candidates are required to attempt five questions in all selecting one question from
each of the sections A, B, C & D of the question paper and all the subparts of the questions in
Section E. Use of non-programmable calculators is allowed.
SYLLABUS:
Section-A
Introduction: Limitations of vapor compression systems for production of low temperature, multistage
systems, cascade system, production of solid carbon dioxide, magnetic cooling.
Low Temperature Thermometry: temperature scales gas-vapor pressure thermometry, adiabatic
demagnetization.
Section-B
Cryogenic Gases: Properties of cryogenic fluids-oxygen, nitrogen, air, hydrogen and helium Joule-
Thomson effect and liquification of gases, liquification of air, hydrogen and helium, critical components of
liquefiers, reftifier columns, separation of air, separation of helium from natural gas, distillation of liquid
hydrogen & purification.
Section-C
Insulation: Vacuum insulation, gas filled powders and fibrous materials, solid forms, comparison of
various insulating materials.
Storage: Types of insulated storage containers, various design considerations, safety aspects-
flammability hazards and high pressure gas hazards.
Section-D

Transportation: Two phases flow, transfer thorough insulated and uninsulated lines, liquid line
indicators, pumps and valves for cryogenic liquids.
Applications: Industrial applications, research and development; Mechanical, thermal and
thermoelectric properties of structural material at cryogenic temperatures.
Text Books:
1. Cryogenics and Refrigeration by Coldin.
2. Experimental techniques in low temperature physics by G.K.White, Clayrendon Press, Oxford.

Reference Books:
1. Crygenic Research and Applications-Marshall Sitting and Stephen and Kid, D.Van Nostrand
Company.Inc.USA.
2. Cryogenics-Bailey C.A
3. Refrigeration and Air Conditioners-Spark and Dillo.
4. Cryogenic Engineering, Fundamentals of Cryogenic Engineering, Mukhopadhya, PHI Learning
Private Limited.

108
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER - VII

MAINTENANCE & Reliability ME-411 (c)

Course Code ME – 411 (c) L-3, T-0, P-0


Name of the Course Maintenance & Reliability
Lectures to be 39 (1 Hr Each) (L = 39 for each semester)
delivered
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)
INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A, B,
C & D will have two questions from the respective sections of the syllabus and each section will
carry 20% of the total marks of the semester end examination for the course. Section E will be
compulsory, it will consist of a single question with 10-20 subparts of short answer type, which will
cover the entire syllabus and each question will carry 20% of the total marks of the semester end
examination for the course.
2. For candidates: Candidates are required to attempt five questions in all selecting one question from
each of the sections A, B, C & D of the question paper and all the subparts of the questions in
Section E. Use of non-programmable calculators is allowed.
SYLLABUS:

Section-A

Introduction: Evolution of maintenance, objective of maintenance, maintenance and philosophies,


maintenance concept maintenance management & technology, relationship with other functional areas,
importance of maintenance, elements of good maintenance economics of maintenance, training and
safety aspects in maintenance.

Maintenance strategies: classification of maintenance programs. Corrective, preventive and predictive


maintenance, comparison of maintenance programs, preventive maintenance concept, functions, benefits,
limitations.

Section-B

Condition based maintenance (CBM): Objectives, what to monitor, when to monitor, principal of CBM,
condition based maintenance techniques, manual inspections, performance monitoring, vibration
monitoring, oil debris. Spectroscopy, thermography and corrosion, monitoring steps in implementation of
CBM, benefits of CBM.

Reliability Centered maintenance (RCM): RCM logic, maintenance and RCM, benefits of RCM, total
productive maintenance (TPM), introduction, key supporting elements of TPM methodology, evaluation
and benefits.

Section-C

Non-destructive Testing (NDT): Purpose and challenges; techniques, visual aids, boroscopes,
endoscopes, fiber optics scanner, magnetic particles inspection, liquid penetrants. Ultrasonic radiography,
selection of NTD techniques, merits/demerits and application of various techniques.

Maintenance Planning and Control: Basic ingredients, basic steps in maintenance management,
maintenance planning and control system, documentation, maintenance productivity areas for
improvement.

109
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-D

Reliability, maintenance & availability techniques: Techniques for improvement of operation


reliability, safety and availability of machines and production system, maintainability criteria, checklist to
assess the maintainability improvement program, fault diagnosis, pareto principle, ishikawa diagram.

Text Books:

1. Maintenance planning and control – Higgin L.R.; McGraw Hill.


2. Maintenance planning and control – Kelley Anthony; East-West Press Pvt. Ltd.

Reference Books:

1. Maintainability principal and practices - Blanchard B.S., Lowey E.E., Mc Graw Hill.
2. Practical NDT – Raj B, Jayakumar T, Thavasimutyi K, Narosa Publishing House.
3. Engineering Maintenance Management – Nieble Benjamin W, Marcel Dekher.

110
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VII

ROBOTICS ME -411 (d)

Course Code ME – 411 (d) L-3, T-0, P-0


Name of the Course Robotics
Lectures to be 39 (1 Hr Each) (L = 39 for each semester)
delivered
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)
INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A, B,
C & D will have two questions from the respective sections of the syllabus and each section will
carry 20% of the total marks of the semester end examination for the course. Section E will be
compulsory, it will consist of a single question with 10-20 subparts of short answer type, which will
cover the entire syllabus and each question will carry 20% of the total marks of the semester end
examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question from
each of the sections A, B, C & D of the question paper and all the subparts of the questions in
Section E. Use of non-programmable calculators is allowed.
SYLLABUS:

Section-A

Robotic manipulation: Automation and Robots Classification – Drive technologies Work-Envelope


Geometries, Motion Control Method, Application: Robot Specifications – No. of Axes, Capacity and Speed,
Reach and Stroke, Tool Orientation, Repeatability, Precision, Accuracy, Operating Environment.

Section-B

Direct kinematics: the arm equation homogenous Co-ordinates – frames, translation and rotations,
composite homogenous transformations, screw transformations, link Co-ordinates; the arm equation; a
five-axis articulated robot; a four-axis scara robot; a six-axis articulated robot.

Inverse kinematics: Solving the arm equation: the inverse kinematics problem general properties of
solutions; tool configuration; inverse kinematics of a five-axis articulated robot, four-axis scara robot, six-
axis articulated robot and three-axis planer articulated robot.

Section-C

Work space analysis and trajectory planning: work space analysis; work envelope of a five axis
articulated robot, work envelope of a four axis scara robot, work space fixtures, The pick and place
Operation, Continuous path motion, Interpolated motion, straight line motion.

Differential motion and statics: the tool configuration jacobian matrix; joint space singularties;
generalised inverses; resolved motion rate control; n>6; rate control of reuntant rebots: n>6: rate control
using (1)–inverse, the manipulator jacobian.

111
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-D

Manipulator dynamics: Lagranges equation; kinetic & potential energy; generalized force; laqranges
euler dynamic model; dynamic model of a two axis planer articulated robot and a three axis scara robot;
direct & inverse dynamic recursive Newton – euler formulation; dynamic model of a one axis robot.

Robot control: the control problem; state equations; constant solutions; linear feedback system; single
axis PID control; PD gravity control; computer – torque control; variable structure control; impedance
control.

Text Books:

1. Fundamental of Robotics (analysis & control) by Robot J. Schilling Published by PHI, Pvt. Ltd., New
Delhi.
2. Introduction to Robotics (Mechanics & control) by John J.Craig Published by Pearsons.

Reference Books:

1. Analysis Robotics & Mechatronics by Wolfram Stadler Published by McGraw Hill.


2. Industrial Robotics – Technology programmer & application by Mikell P Grover, Weiss Nagel and
Ordef Published by McGraw Hill.
3. Foundations of Robotics (analysis and control) by Tsuneo Yashikawa Published by MIT Press.
4. Robots and control – R.K. Mittal and Nagrath – Tata McGraw Hill New Delhi.

112
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VII

TOTAL QUALITY CONTROL ME – 411 (e)


Course Code ME – 411 (e) L-3, T-0, P-0
Name of the Course TOTAL QUALITY CONTROL
Lectures to be 39 (1 Hr Each) (L = 39 for each semester)
delivered
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)
INSTRUCTIONS:
1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A, B,
C & D will have two questions from the respective sections of the syllabus and each section will
carry 20% of the total marks of the semester end examination for the course. Section E will be
compulsory, it will consist of a single question with 10-20 subparts of short answer type, which will
cover the entire syllabus and each question will carry 20% of the total marks of the semester end
examination for the course.
2. For candidates: Candidates are required to attempt five questions in all selecting one question from
each of the sections A, B, C & D of the question paper and all the subparts of the questions in
Section E. Use of non-programmable calculators is allowed.
SYLLABUS:
Section-A
Quality Control: introduction, objectives, quality of design, quality of production, quality of conformance
to design, quality of inspection, process monitoring, quality and productivity, quality cost Advantages of
statistical Quality Control in Industry.
Fundamentals of Statistics and Probability in Quality Control: Events and probability, laws of
probability, Statistical Distributions: Normal and Poisson distribution, their importance in SQC. Poisson
Probability as approximation to Normal Probability, use of Normal and Poisson distribution tables.
Section-B
Control Charts for Variables: Fundamentals of process control, tool of process control, quality
characteristic, Design and use of Control for Variables: Trial control limits, control limits for future use,
revision of control limits. Cause and effect diagram. Inferences on the state of the process from control
charts, Type I and Type II errors and methods to reduce them. Use of X (X bar) charts and R-charts, and R-
charts, X (X bar) and σ- charts. Efficiency of a control chart. OC curve of a control chart. Computing
average run length for X- chart.
Section-C
Trend Control Charts, Control Charts with Reject limits and Modified Control Charts: Introduction
to Trend Control Charts, Control Charts with Reject limits and Modified Control Charts, Relationship
between Specification Limits and Control Chart Limits, Process capability analysis and its importance in
quality of conformance.
Section-D
Control Charts for Attributes: Defectives, control charts for fraction defectives and percent fraction
defectives and number of defectives. Control charts for number of defects. Comparison of control charts
for variables with the charts for variables with the charts for attributes. Computing Average run length
for a p-chart.
Text Books:
1. Quality control Application – By Hansen BL, PH: Prentice Hall of India.
2. Statistical Quality Control – By E.L. Grant & R.S. Levenworth: Tata McGraw Hill.
Reference Books:
1. Quality Control – Paranthaman, D; Tata McGraw Hill, India
2. Quality Planning and Analysis- Juran J.M. and F.M. Gryna (Jr.); Tata McGraw Hill
3. Total Quality Control – By Montgomery, D.C. John Wiley & Sons

Note: Statistical Q.C. Tables will be supplied in examination.

113
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VII

MECHANICAL VIBRATIONS ME – 412

Course Code ME – 412 L-3, T-1, P-0


Name of the Course Mechanical Vibrations
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Examination Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
40
Continuous Assessment (based on sessional tests 50%, Max. Marks: 50
Tutorials/Assignments 30%, Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A

Basic Concepts of Vibrations: Importance and scope, definition and terminology, representation of
harmonic motions, introduction to various types of vibrations and types of excitation.

Section-B

Single Degree of Freedom Systems:


a) Undamped Free Vibrations: D Alemberts Principle, Energy method, Rayleigh method, simple
applications of these methods, equivalent spring stiffness.

b) Damped Free Vibrations: Introduction to different types of damping, Viscous damping, sub-
critical, critical and overdamping, logarithomic decrement, frequency of damped oscillations.

c) Forced Vibrations: Solution for simple harmonic excitation, steady state vibrations, base
excitation, vibration isolation and transmissibility, vibration measuring instruments, whirling
of shaft without friction.

Section-C

Two Degree of Freedom Systems:


a) Undamped Fee Vibrations: Normal modes vibrations, natural frequencies, mode shapes,
forced harmonic vibrations, torsional vibrations of two rotor systems.

b) Applications: Dynamic vibration absorber, centrifugal pendulum absorber, torsional


vibration absorber, untuned vibration damper, gyroscopic effect on rotating shaft.

114
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-D

Multi-Degree of Freedom Systems:


Undamped free vibrations: Reciprocity theorem, Rayleigh and Dunkerley method, three rotor and
geared systems.

Continuous Systems:
Free vibration of the following for various end conditions: Vibration of a string, longitudinal
vibrations of bar, transverse vibration of beam, torsion of vibrations of circular shaft.

Text Books:

1. Mechanical Vibration by S.S. Rattan, Tata McGraw Hill.


2. Mechanical Vibrations by Nag, Wiley India.

Reference Books:

1. Mechanical Vibration by V.P. Singh, Dhanpat Rai Publications.


2. Mechanical Vibration by G.K. Grover, Nem Chand & Bros, Roorkee, India.
3. Mechanical Vibration by S.S.Rao, Pearsons Education.
4. Vibration and Noise for Engineers by Kewal Pujara, Dhanpat Rai Publications.
5. Mechanical Vibrations, Text Book of Mechanical Vibrations, 2 nd Edition by Dukkipati, PHI
Learning Private Limited.

115
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VII
AUTOMOBILE ENGINEERING ME – 413

Course Code ME - 413 L-4, T-0, P-0


Name of the Course Automobile Engineering
Lectures to be delivered 52 (1 Hr Each) (L = 52, for each semester)
Semester End Examination Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
40
Continuous Assessment (based on sessional tests 50%, Max. Marks: 50
Tutorials/Assignments 30%, Quiz/Seminar 10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A,
B, C & D will have two questions from the respective sections of the syllabus and each section
will carry 20% of the total marks of the semester end examination for the course. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type,
which will cover the entire syllabus and each question will carry 20% of the total marks of the
semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the
questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A

Introduction to Automobiles: Classification, Components, Requirements of Automobile Body: Vehicle


Frame. Types; Front Engine Rear Drive & Front Engine Front Drive Vehicles, Four Wheel Drive Vehicles.

Clutches: Introduction to clutches, requirement of Clutches – Principle of Friction Clutch – Wet Type &
Dry Types: Single Plate Clutch, Multi plate Clutch, Centrifugal Clutches, Clutch linkages.

Section-B

Power Transmission: Object of the Gear Box; Different types of Gear Boxes; Sliding Mesh, Constant
Mesh, Synchromesh Gear Boxes; Drive Lines, Universal Joint, Propeller Shaft, Slip Joint; Front wheel drive;
Principle, Function, Construction & Operation of Differential; Rear Axles, Types of load coming on Rear
Axles, Full Floating, Three Quarter Floating and Semi Floating Rear Axles.

Section-C

Suspension Systems: Need of Suspension Systems, Types of Suspension; factors influencing ride
comfort, leaf springs, shock absorber.

Steering System: Front Wheel geometry & Wheel alignment viz. Caster, Camber, King Pin Inclination,
Toe-in/Toe-out; Conditions for true rolling motions of Wheels during steering: Different type of Steering
Gear Boxes; Steering linkages and layout; Rack & Pinion Power Steering Gear.
Section-D

Automotive Brakes, Tyres & Wheels: Classification of Brakes; Principle and construction details of
Drum Brakes, Disc Brakes; Mechanical, Hydraulic, Pneumatic Brakes; Power Assisted Brakes; Tyres of
Wheels; Types of tyre & their constructional details, Tyre rotation; Excessive Tyre wear & their causes.

Automotive Electricals: Purpose & Operation of lead acid Battery, capacity rating. Purpose and
Operations of the Starting System; and charging system.

116
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Text Books:

1. Automobile Engineering (Vol. 1 & Vol. 2) by Dr. Kirpal Singh, Standard Publishers Distributors.
2. Automobile Engineering by Anil Chhikara, Satya Prakashan, New Delhi.

Reference Books:

1. Automotive Mechanics – Crouse & Anglin, Tata McGraw Hill.


2. Automotive Technology – H.M.Sethi, Tata McGraw Hill.
3. Automotive Mechanics – S.Srinivasan, Tata McGraw Hill.
4. Automotive Mechanics – Joseph Heitner, EWP.
5. Motor Automotive Technology by Anthony E. Schwaller – Delmer Publishers. Inc.
6. The Motor Vehicle – Newton steeds Garrett, Butterworth.
7. Automobile Engineering, Automobile Engineering, Ramakrishana, PHI Learning Private
Limited.

117
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VII

REFRIGERATION AND AIR CONDITIONING ME- 414

Course Code ME- 414 L-4, T-1, P-0


Name of the Course Refrigeration and Air Conditioning
Lectures to be delivered 65 (1 Hr Each) (L = 52, T = 13 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A,
B, C & D will have two questions from the respective sections of the syllabus and each section
will carry 20% of the total marks of the semester end examination for the course. Section E will
be compulsory, it will consist of a single question with 10-20 subparts of short answer type,
which will cover the entire syllabus and each question will carry 20% of the total marks of the
semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question
from each of the sections A, B, C & D of the question paper and all the subparts of the
questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A
Introduction: Definition of refrigeration & air conditioning; Necessity; Methods of refrigeration; Unit of
refrigeration; Coefficient of performance (COP), Fundamentals of air-conditioning system; Refrigerants-
Definition, Classification, Nomenclature, Desirable properties, Comparative study, secondary refrigerants,
Introduction to eco-friendly Refrigerants; Introduction to Cryogenics.

Air Refrigeration Systems: Carnot refrigeration cycle. Temperature Limitations; Brayton refrigeration
or the Bell Coleman air refrigeration cycle; Necessity of cooling the aeroplane; Air craft refrigeration
systems, Simple cooling and Simple evaporative types, Boot strap and Boot strap evaporative types,
Regenerative type and Reduced Ambient type system, Comparison of different systems.

Section-B

Vapour Compression (VC) Refrigeration Systems:


(a) Simple Vapour Compression (VC) Refrigeration systems- Limitations of Reversed Carnot cycle
with vapour as the refrigerant; Analysis of VC cycle considering degrees of sub cooling and superheating;
VC cycle on p-v, t-s and p-h diagrams; Effects of operating conditions on COP; Comparison of VC cycle with
Air Refrigeration cycle.
(b) Multistage Refrigeration Systems- Necessity of compound compression, Compound VC cycle , Inter-
cooling with liquid sub –cooling and / or water inter cooler: Multistage compression with flash inter-
cooling and / or water inter-cooling; systems with individual or multiple expansion valves; Individual
compression system with individual or multiple expansion valves; Individual compression systems with
individual or multiple expansion valves but with and without intercoolers.

Section-C
Other Refrigeration Systems:
(a) Vapour Absorption Refrigeration Systems – Basic Systems, Actual COP of the System,
Performance, Relative merits and demerits; Properties of aqua ammonia; Electrolux
Refrigeration.

118
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

(b) Steam Jet Refrigerating System- Introduction, Analysis, Relative merits and demerits,
Performance Applications.
(c) Cascade Refrigerating Systems- Necessity Selection of Pairs of refrigerants for the system,
Concept of cascade temperature, Analysis, Multistaging, Comparison with V.C. systems,
Applications.

Psychrometry of Air & Air Conditioning Processes: Properties of moist Air-Gibbs Dalton law, Specific
humidity, Dew point temperature, Degree of saturation, Relative humidity, Enthalpy, Humid specific heat,
Wet bulb temp., Thermodynamics wet bulb temp., Psychrometric chart; Psychrometry of air-conditioning
processes, Mixing Process, Basic processes in conditioning of air.

Section-D

Air- Conditioning Load Calculations: Outside and inside design conditions; Sources of heating load;
Sources of cooling load; Heat transfer through structure, Solar radiation, Electrical applications,
Infiltration and ventilation, Heat generation inside conditioned space; Apparatus selection.

Air Conditioning Systems with Controls & Accessories: Classifications, Layout of plants; Equipment
selection; Air distribution system; Duct systems Design; Filters; Refrigerant piping; Design of summer air-
conditioning and Winter air conditioning systems; Temperature sensors, Pressure sensors, Humidity
sensors, Actuators, Safety controls; Accessories.

Refrigeration and Air Conditioning Equipments: Type of compressors and their performance curves;
Types of Condensers, Heat transfer in condensers; Types of expansion devices; types of evaporators,
Cooling and Dehumidifying coils.

Text Books:

1. Refrigeration & Air Conditioning- R.C. Jordan and G.B. Priester, Prentice Hall of India.
2. Refrigeration & Air Conditioning-C.P.Arora, Tata-McGraw Hill, New Delhi.

Reference Books:

1. A course in Refrigeration & Air Conditioning – Arora & Domukundwar, Dhanpat Rai Publications.
2. Refrigeration & Air Conditioning- W.F. Stockerand, J.W. Jones, Tata-McGraw Hill.
3. Refrigeration & Air Conditioning- Manohar Prasad, Wiley Eastern limited.

119
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VII

OPERATIONS RESEARCH ME – 415

Course Code ME – 415 L-4, T-1, P-0


Name of the Course Operations Research
Lectures to be delivered 65 (1 Hr Each) (L = 52, T = 13 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the
syllabus and each section will carry 20% of the total marks of the semester end
examination for the course. Section E will be compulsory, it will consist of a single
question with 10-20 subparts of short answer type, which will cover the entire syllabus
and each question will carry 20% of the total marks of the semester end examination
for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the
subparts of the questions in Section E. Use of non-programmable calculators is
allowed.
SYLLABUS:
Section-A

Definition and characteristics of O.R.; Decision making, Scientific decision making, Approach for
scientific decision making in O.R.; Need and Limitations of O.R. Definition of models: Classification of
models, construction of models, approximations of O.R. models.

Section-B

Allocation Model: Analysis of Industrial situations to find characteristics like key decision objective,
possible alternatives & restrictions – Three categories of allocation type situation to be considered
General Mathematical formulation for linear programming feasible and optimal solutions.

Graphical and simplex techniques to solve linear models, modifications of minimization situation so as
to be solvable by simplex method. Duality and degeneracy in simplex method. Applications and
limitations of linear optimization models
Section-C

Net-work Models: Transportation models, methods of finding starting solution Vogel’s approximation
method to find feasible solution in transportation models, methods for finding optimal solution.
Assignment model, Hungarian method to find optimal solution in assignment models.

Cyclic shortest route models, traveling salesman’s problem and Branch and Bound method to solve it. A
cyclic shortest route models and their solution by graphical methods. Queuing theory, various types of
queuing situations and their solutions.

120
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-D

PERT & CPM: Network situations where PERT & CPM can be applied , planning, scheduling & Control,
work-breakdown structure.

(a) PERT Networks: Events and activities, construction of network, forward & backward
planning, Fulkerson’s rules, optimistic, pessimistic & most likely time estimates, frequency
distribution, Mean, variance and standard deviation, expected time and latest occurrence time,
definitions of slack and critical path.
(b) CPM Networks: Similarity and differences of CPM and PERT construction of network, earliest
event time, float, total float, free float, independent float, contracting the network so as to find
an optimum project schedule.

Text Books:

1. An Introduction to Operation Research by A.H.Taha, Tata McGraw Hill.


2. Operations Research by Prem Kumar Gupta and D.S.Hira, S.Chand Publications.

Reference Books:

1. Operations Research by Manohar Prasad, Dhanpat Rai Publications


2. Operations Research by Swarup, Kanti, Gupta, P.K. and Manmohan, Sultan Chand & Sons.
3. Operation Research, Operation Research, Raja Gopal, PHI Learning Private Limited.

121
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VII

AUTOMOBILE ENGINEERING LAB. ME-413 (P)

Course Code ME–413 (P) L-0, T-0, P-2


Name of the Course Automobile Engineering Lab.
Lectures to be delivered 26 hours of Lab sessions (2 Hrs per week)
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10 Maximum Time: 3 Hrs
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%

INSTRUCTIONS FOR PAPER SETTER/CANDIDATES:

Laboratory examination will consist of two parts:


i) Performing a practical examination assigned by the examiner.
ii) Viva-voce examination.
Viva-voce examination will be related to the practical’s performed/projects executed by the candidate
related to the paper during the course of the semester.

LIST OF PRACTICALS/EXPERIMENTS:

1. To study and prepare report on the constructional details, working principle and operation of the
following
(a) Single plate clutch.
(b) Multi plate clutch.
2. To study and prepare report on the constructional details, working principles and operation of the
following
(a) Constant mesh Gear Box.
(b) Synchromesh Gear Box.
3. To study and prepare report on the constructional details, working principles and operation of the
following
(a) Rear Wheel Drive Line.
(b) Front Wheel Drive Line.
(c) Differentials
4. To study and prepare report on the constructional details, working principles and operation of the
following
(a) Starting System.
(b) Ignition System.
5. To study and prepare report on the constructional details, working principles and operation of the
Charging System.
6. To study and prepare report on the constructional details, working principles and operation of the
following
(a) Front Suspension System.
(b) Rear Suspension System.
7. To study and prepare report on the constructional details, working principles and operation of
Rack and Pinion Power steering system.
8. Adjusting of brake shoes and bleeding the hydraulic brake system.

122
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VII

REFRIGERATION & AIR CONDITIONING LAB ME – 414 (P)

Course Code ME–414 (P) L-0, T-0, P-2


Name of the Course Refrigeration & Air Conditioning Lab.
Lectures to be delivered 26 hours of Lab sessions (2 Hrs per week)
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10 Maximum Time: 3 Hrs
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%

INSTRUCTIONS FOR PAPER SETTER/CANDIDATES:

Laboratory examination will consist of two parts:


i) Performing a practical examination assigned by the examiner.
ii) Viva-voce examination.
Viva-voce examination will be related to the practical’s performed/projects executed by the candidate
related to the paper during the course of the semester.

LIST OF EXPERIMENTS:

1. To study the vapor compression Refrigeration Systems and determine its C.O.P

2. To study water cooler and find it’s C.O.P

3. To study the ice-plant, it’s working cycle and determines its C.O.P and capacity

4. To determine the By-pass factor of Heating & Cooling coils

5. To study the cut-sectional models of reciprocating and Rotary Refrigerant compressor

6. To study the various controls used in Refrigerating & Air Conditioning System

7. To study the humidification, heating, cooling and dehumidification processes

8. To study Desert cooler & Window Type Air Conditioner

9. To study cooling tower and find its efficiency

123
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VIII
MATERIAL HANDLING AND PLANT LAYOUT ME-421 (a)

Course Code ME-421 (a) L-3, T-0, P-0

Name of the Course Material Handling and Plant Layout

Lectures to be delivered 39 (1 Hr Each) (L=39 for each semester)

Semester End Examination Max. Time: 3 hrs. Max Marks:100 Min. Pass Marks:40

Continuous Assessment (based on sessional tests 50 %, Tutorials Max. Marks:50


Assignments 30%, Quiz/Seminars 10% Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A, B, C & D
will have two questions from the respective sections of the syllabus and each section will carry 20% of
the total marks of the semester end examination for the course. Section E will be compulsory, it will
consist of a single question with 10-20 subparts of short answer type, which will cover the entire syllabus
and each question will carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one question from
each of the sections A, B, C & D of the question paper and all the subparts of the questions in Section E.
Use of non-programmable calculators is allowed.

SYLLABUS:

Section-A

General: Concepts and factors governing plant locations economics, rural economics, rural Vs urban
plant sites, case studies (i) Selection of a site for software company (ii) Selection of a site for XYZ
Company: analysis of alternatives.

Plant Layout: Introduction of plant layout, principles and objectives of effective layout, advantages of
good layout, symptoms of bad layout. Types of plant layout, their features. Applications and comparison,
Introduction to group technology: its relevance, application and advantages.

Section-B

Planning the layout: Factors influencing plant layout; material factors, machinery factors, man factors
movement factors, waiting factors, service factors, change factors, building factors, workstation design
methods of plants and factory layout, plant layout procedure, factory building , building equipments,
common problems in plant layout, tool and techniques of layout, operation process chart, flow process
chart, flow diagram, string diagram, evaluating alternate layout-various methods.

Line balancing: Objective of line balancing problems; constraint in line balancing problem, terminology
in assembly line, preventive measures to achieve a balanced production line. Types of line balancing: (a)
Assembly line balancing (b) Fabrication line balancing, Heuristic and other method of line balancing,
simple numerical problems in line balancing.

124
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-C

Materials handing : Objectives of material handling systems, material handling engineering survey, basic
features of handling, types of material handling systems, material handling engineering survey, basic
features of handling, various materials handling, considerations including combined handling, space for
movements, analysis of handling methods, economical and technical considerations of handling
equipment, cost analysis of material handling systems.

Section-D

Material handling equipments: Introduction, types of material handling equipment; selection and
maintenance of material handling equipments, characteristics of material handling equipments such as
conveyers, cranes, hoist, Amount of equipments required and predicting in process inventory by
graphical technique.

Travel Chart: Procedure for travel charting, numerical problem on optimum arrangement of various
departments of shops under given constraints and to check their effectiveness.

Text Books:

1. Plant Layout and design – By Moore.


2. Plant Layout and material handling – By Apple.

Reference Books:
1. Plant Layout – By Shubhin.
2. Construction Management - Mahesh Verma.

125
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER-VIII

INTRODUCTION TO COMPUTATIONAL FLUID DYNAMICS ME-421 (b)

Course Code ME-421 (b) L-3, T-0, P-0


Name of the Course Introduction to Computational Fluid Dynamics
Lectures to be delivered 39 (1 Hr Each) (L=39 for each semester)
Semester End Examination Max. Time: 3 hrs. Max Marks:100 Min. Pass Marks:40
Continuous Assessment (based on sessional tests 50 %, Tutorials Max. Marks:50
Assignments 30%, Quiz/Seminars 10% Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A, B,
C & D will have two questions from the respective sections of the syllabus and each section
will carry 20% of the total marks of the semester end examination for the course. Section E
will be compulsory, it will consist of a single question with 10-20 subparts of short answer
type, which will cover the entire syllabus and each question will carry 20% of the total marks
of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of the
questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A
Introduction: Introduction to computational fluid dynamics, Review of governing equations of fluid
flow (Continuity Equation, Momentum Equation, Energy Equation).

Section-B
Discretization: Introduction to finite differences, difference equations, explicit and implicit
approaches: definition and contrasts, errors and analysis of stability.
Classification of partial differential equations: Explicit and Implicit methods, solution of select
model equations; Laplace heat and wave equation, laminar boundary layer solution.

Section-C
CFD techniques: The lax-wendroff technique, MacCormack's technique, Relaxation technique and its
use with low speed inviscid flows, aspects of numerical dissipation and dispersion; artificial viscosity.

Section-D
Alternating Direction Implicit (ADI) technique, pressure correction technique with application to
incompressible viscous flow.

Text Books:
1. Computational Fluid Dynamics - John D. Anderson Jr., McGraw Hill.
2. Computational fluid flow and heat transfer - D.A. Anderson et .al

Reference Books:
1. Introduction to Computational fluid Mechanics – Chuen - Yen Chow.
2. Computational Fluid Flow and Heat Transfer - K.Muralidhar and T.Sunderrajan, Narosa
Publishing House.

126
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER-VIII

INDUSTRIAL TRIBOLOGY ME-421 (c)

Course Code ME-421 (c) L-3, T-0, P-0


Name of the Course Industrial Tribology
Lectures to be delivered 39 (1 Hr Each) (L=39 for each semester)
Semester End Examination Max. Time: 3 hrs. Max Marks:100 Min. Pass Marks:40
Continuous Assessment (based on sessional tests 50 %, Tutorials Max. Marks:50
Assignments 30%, Quiz/Seminars 10% Attendance 10%)
INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A, B,
C & D will have two questions from the respective sections of the syllabus and each section
will carry 20% of the total marks of the semester end examination for the course. Section E
will be compulsory, it will consist of a single question with 10-20 subparts of short answer
type, which will cover the entire syllabus and each question will carry 20% of the total marks
of the semester end examination for the course.
2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of the
questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A
Introduction: Tribology, Contact of solids, nature of surfaces, surface topography, surface interactions
and characterization, micro and nanotribology, surface roughness measurement techniques.

Section-B
Friction: Types, laws, modern theories, dry sliding friction, temperature of sliding surfaces, mechanism of
rolling friction, friction instabilities.
Wear: Classification, theories of adhesive, abrasive, surface fatigue and corrosive wear, erosive wear,
cavitation and fretting wear, wear models, wear of various machine components such as gears, plain
bearings and rolling element bearing, ASTM standards for wear measurement, wear resistant materials,
wear resistant components.

Section-C
Viscosity: Basic definition, conversion, dynamic viscosity, measurement, variation with temperature,
ASTM charts, viscosity index, grade of oil.
Lubricants: Types of lubricants, Selection of Lubricants, Properties and tests on Lubricants, Analysis of
used oils/lubricants, Particle counter, spectroscopic oil analysis, Ferrography.

Section-D
Lubrication theories: Lubrication regimes, viscous flow and viscometry, Reynold’s equation, Energy
Equation, solution of Reynolds equation, Meachanism of pressure development in fluid film bearing,
hydrodynamic lubrication, hydrostatic lubrication, Elastohydrodynamic lubrication, Lubrication between
two contact bodies, Hertzian and non-hertzian contacts, phenomenon of starvation, boundary lubrication,
squeeze films, turbulent lubrication.
Text Books:
1. Fundamentals of Tribology -Bharat Bhushan
2. Fundamentals of Tribology-Basu, Sengupta & Ahuja

Reference Books:
1. Fundamentals of Machine elements-Hamrock, Schmid & Jacobson
2. Basic Lubrication Theory - A Comeron
3. Friction Wear & Lubrication-Kenneth C.Ludema
4. Applied Tribology -Khonsari

127
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VIII

NON-CONVENTIONAL ENERGY RESOURCES ME -421 (d)

Course Code ME – 421 (d) L-3, T-0, P-0


Name of the Course Non-conventional energy resources
Lectures to be delivered 39 (1 Hr Each) (L = 39 for each semester)
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Examination
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)
INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A, B,
C & D will have two questions from the respective sections of the syllabus and each section
will carry 20% of the total marks of the semester end examination for the course. Section E
will be compulsory, it will consist of a single question with 10-20 subparts of short answer
type, which will cover the entire syllabus and each question will carry 20% of the total marks
of the semester end examination for the course.
2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of the
questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A
Introduction: Trends of energy consumption sources of energy conventional and renewable, fossil fuel –
availability and limitations, need develop new energy sources.
Solar Energy: Solar radiation characteristic, Solar Collectors, Flat Plate and concentrating types, Their
comparative study, design and material selection. Efficiency, Selective paints and surfaces. Heating of air
and water for building and other uses. Thermal storages, Solar Ponds, Solar pumps, solar Cookers etc.
Direct Conversion of Solar energy to electricity and its various uses, materials, limitations and costs.

Section-B
Bio-conversion: Generation of bio gas, digesters and then design, selection of material, feed to digester,
paralytic gasification, production of hydrogen, Algae production and the their uses.
Wind Energy: Types of rotors, horizontal axis and vertical axis system, system design and site selection.

Section-C
Geo-thermal Energy: Sites, potentiality and limitation, study of different conversion system.
Tidal Energy: Sites potentiality and possibility of harnessing from site, limitations.

Section-D
Occan thermal energy: Principal of utilization and its limitation, description of various systems.
Other non-conventional energy sources: Fluidized bed combustions. Heat from waste and other
sources.
Text Books:
1. Solar Energy Utilization - G.D. Rai.
2. Solar Heating and Cooling – Duffie and Bakemann, McGraw Hill.
Reference Books:
1. Power Plant Technology – M.M. EL -Wakil, McGraw Hill Book Co.
2. Power Plant Engineering – P.C. Sharma, S.K. Kataria and Sons.

128
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VIII

ADVANCED OPERATIONS RESEARCH ME – 421 (e)


Course Code ME – 421 (e) L-3, T-0, P-0
Name of the Course Advanced Operations Research
Lectures to be delivered 39 (1 Hr Each) (L = 39 for each semester)
Semester End Examination Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Continuous Assessment (based on sessional tests 50%, Max. Marks: 50
Tutorials/Assignments 30%, Quiz/Seminar 10%, Attendance 10%)
INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A, B,
C & D will have two questions from the respective sections of the syllabus and each section
will carry 20% of the total marks of the semester end examination for the course. Section E
will be compulsory, it will consist of a single question with 10-20 subparts of short answer
type, which will cover the entire syllabus and each question will carry 20% of the total marks
of the semester end examination for the course.
2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of the
questions in Section E. Use of non-programmable calculators is allowed.
SYLLABUS:
Section-A
Introduction to Operations Research: Formulation of problems, simplex method problem of
degenerals, dual simplex method revised simplex method, bounded variable problems.
Integer Programming: Graphical method, the branch and bound technique, Gomary’s ALL-IPP method,
transportation model, unbalance in transportation, transshipment problem, sensitivity analysis in
transportation problems.
Section-B
Dynamic Programming: Bellman’s principle of optimality, examples on the application on routing
problem, inventory problem, simplex problem, marketing problem.
Network Analysis: PERT and CPM, probability of achieving completion data, cost analysis, graph
reduction theory, updating, resource allocation, resource smoothing.
Section-C
Inventory Method: Variables in an inventory problem, inventory problem, inventory models with
penalty, storage and quantity discount, safety stock, inventory models with probability, demand, multi
item deterministic model.
Queuing Theory: Poison arrivals and exponential service times, waiting time and idle time cost, single
channel multi channel problem. Monte technique applied to queuing problems, Poisson arrivals and
service time.
Section-D
Decision Theory Game: Examples on the application of theory of games 2 XM and MX2 Problems,
graphic dominance and linear programming method for different problems, decision trees.
Replacement Models: Replacement of items that deteriorate, gradually, fail suddenly, group placement
policy, concept of system reliability.
Text Books:
1. Kumar Gupta, Prem and Hira, D.S., “Operations Research”, S Chand & Company Limited, 1986.
2. Swarup, Kanti, Gupta, P.K. and Manmohan, “Operations Research”, Sultan Chand & Sons, New Delhi
1988.
Reference Books:
1. Srinath L.S., “PERT & CPM Principles and Applications”, Affiliate East West Press (P) Limited, New
Delhi, 1975.

129
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VIII
COMPUTER AIDED DESIGN AND MANUFACTURING ME – 422

Course Code ME – 422 L-4, T-1, P-0


Name of the Course Computer Aided Design and Manufacturing
Lectures to be delivered 65 (1 Hr Each) (L = 52, T = 13 for each semester)
Semester End Examination Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)

INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.

2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.

SYLLABUS:
Section-A

Introduction to CAD/CAM: Historical Development, Industrial look at CAD/CAM, Introduction to CIM,


Design Process, Introduction to CAM/ CIMS, Importance and Necessity of CAD, Applications of CAD,
Hardware and Software requirement of CAD

Geometric and Wire Frame Modeling: Basics of geometric and solid modeling coordinate systems. 2-D
and 3-D Wire Frame Models, Hardware for drafting Packages, Command and Menu Driven Softwares,
Features of a Drafting Package, Drawing Utilities, Entities, Edit Commands, Blocks and Symbols,
Viewports.
Section-B

Curves, Surfaces and Solids: Algebraic and geometric forms, tangents and normal, blending functions
reparametrization, straight lines, conics, cubic splines, Bezier curves and B-spline curves. Ruled surface,
surface of revolution, tabulated cylinder, bi-cubic surface, Bezier surface, B-spline surface,

Transformations: Introduction, transformation of points and line, 2-D rotation, reflection, scaling and
combined transformation, homogeneous coordinates, 3-D scaling, shearing, rotation, reflection and
translation, combined transformations.
Section-C

Solid Modeling: Solid models and representation scheme, boundary representation, constructive solid
geometry, sweep representation, cell decomposition.

Automation and Numerical Control: Introduction, fixed, programmable and flexible automation, types
of NC systems, MCU and other components, NC manual part programming, coordinate systems, G & M
codes, Part program for simple parts, computer assisted part programming.

130
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

Section-D

Group Technology: Part families, part classification and coding, production flow analysis, Machine cell
design, Advantages of GT.

Flexible Manufacturing Systems & Computer aided process planning: Introduction, FMS components,
types of FMS, FMS layouts, planning for FMS, advantages and applications Conventional process planning,
types of CAPP, Steps in variant process planning, planning for CAPP. Finite Element Method: Introduction,
Procedure,

Text Books:

1. CAD/CAM by Mikell P. Groover and Emory W.Zimmers, Jr., Prentice Hall of India.
2. CAD/CIM by P.Radhakrishnan and G.P. Kothandaraman, Dhanpat Rai Publications.

Reference Books:

1. CAD/CAM (Theory & Practice) by Ibrahim by Zeid, Tata McGraw Hill.


2. CAD/CAM (Principles, Practice & Manufacturing Management) by Chris McMohan & Jimmie
Browne, Addison – Wesley.
3. AutoCAD14 for Engg. Drawing Made Easy by P.Nageshwara Rao, Tata McGraw Hill.
4. Mathematical Elements for computer Graphics by David F. Rogers and J. Alan Adams, McGraw Hill.

131
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VIII
POWER PLANT ENGINEERING ME – 423

Course Code ME – 423 L-3, T-1, P-0


Name of the Course Power Plant Engineering
Lectures to be delivered 52 (1 Hr Each) (L = 39, T = 13 for each semester)
Semester End Examination Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks: 40
Continuous Assessment (based on sessional tests 50%, Max. Marks: 50
Tutorials/Assignments 30%, Quiz/Seminar 10%, Attendance 10%)
INSTRUCTIONS:

1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E.
Section A, B, C & D will have two questions from the respective sections of the syllabus
and each section will carry 20% of the total marks of the semester end examination for the
course. Section E will be compulsory, it will consist of a single question with 10-20
subparts of short answer type, which will cover the entire syllabus and each question will
carry 20% of the total marks of the semester end examination for the course.
2. For candidates: Candidates are required to attempt five questions in all selecting one
question from each of the sections A, B, C & D of the question paper and all the subparts of
the questions in Section E. Use of non-programmable calculators is allowed.
SYLLABUS:
Section-A
Introduction: Energy resources and their availability, Types of power plant, selection of the plants,
review of basic thermodynamics cycles used in power plant.
Hydro Electric Power Plants: Rainfall and run-off measurements and plotting of various curves for
estimating power plants, design, construction and operation of different components of hydro-electric
power plant, site selection, comparison of other types of power plants.
Section-B
Steam Power Plants: Flow sheet and working of modern-thermal power plants, super critical pressure
steam stations, site selection, coal storage, preparation, coal handling systems, feeding and burning of
pulverized fuel, ash handling systems, dust collection-mechanical dust collector and electrostatic
precipitator.
Gas Turbine Power Plants: Types, open and closed gas turbine, work output & thermal efficiency,
methods to improve thermal efficiency of gas turbine plant- reheating, inter- cooling regeneration & their
combinations, advantage and disadvantages, comparison with steam power plant.
Section-C
Nuclear Power Plants: Principles of nuclear energy, basic nuclear reactions, nuclear power station,
trouble shooting and remedies.
Power Plant Economics: Effect of plant type on costs, fixed elements, energy elements, customer
elements and investor’s profit, depreciation and replacement.
Section-D
Non-Conventional Power Generation: Solar radiation, solar energy collectors, OTEC, wind power
plants, geothermal resources.
Direct Energy Conversion Systems: Fuel cell, MHD power generation-principle thermoelectric power
generation, thermionic power generation.
Text Books:

1. Power station Engineering and Economy by Bernhardt G.A. Skrotzki and William A. Vopat - Tata
McGraw Hill.
2. Power Plant Engineering by P.K. Nag - Tata McGraw Hill.
Reference Books:

1. An Introduction to Power Plant Technology by G.D. Rai-Khanna Publishers.


2. A Course in Power Plant Engineering by Arora and Domkundwar – Dhanpat Rai Publications.
3. Power Plant Engineering by M.M. El-Wakil - McGraw Hill.
4. Power Plant Engineering, Power Plant Engineering, Gupta, PHI Learning Private Limited.

132
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VIII
MECHATRONICS ME-424
Course Code ME – 424 L-3, T-1, P-0
Name of the Course Mechatronics
Lectures to be 52 (1 Hr Each) (L = 39, T = 13 for each semester)
delivered
Semester End Max. Time: 3 hrs. Max. Marks: 100 Min. Pass Marks:
Examination 40
Continuous Assessment (based on sessional tests Max. Marks: 50
50%, Tutorials/Assignments 30%, Quiz/Seminar
10%, Attendance 10%)
INSTRUCTIONS:
1. For Paper Setters: The question paper will consist of five sections A, B, C, D & E. Section A, B,
C & D will have two questions from the respective sections of the syllabus and each section will
carry 20% of the total marks of the semester end examination for the course. Section E will be
compulsory, it will consist of a single question with 10-20 subparts of short answer type, which will
cover the entire syllabus and each question will carry 20% of the total marks of the semester end
examination for the course.
2. For candidates: Candidates are required to attempt five questions in all selecting one question from
each of the sections A, B, C & D of the question paper and all the subparts of the questions in
Section E. Use of non-programmable calculators is allowed.
SYLLABUS:
Section-A
Introduction and Basics: What is Mechatronics?; A Measurement System with its constituent
elements; Open and Closed Loop System; Sequential Controllers; Micro-processor Based
Controller; The Mechatronic Approach
Section-B
Hardware of Measurement Systems: Force Fluid Pressure, Liquid Flow, Liquid Level,
Temperature, Light Sensors along with Performance terminology
Data Presentation Elements: Magnetic Recording; Data Acquisition System; Testing &
Calibration.
Pneumatic, Hydraulic, Mechanical and Electrical actuation System: Pneumatic and hydraulic
System; Mechanical Systems, Types of Motion, Kinematic Chains, Cams, Gear, Trains, Ratehet &
Pawl. Belt & Chain Drivers, Bearings. Mechanical aspect of Motor Selection; Electrical Systems;
Mechanical & Solid State Switches; Solenoids; D.C. & A.C. Motors; Stepper Motors.
Section-C
Digital Logic and Programmable Logic Controller: A review of Number System & Logic Gates;
Boolean Algebra; Kanaugh Maps; Sequential Logic; Basic Structure of Programmable Logic
Controller; Input/ Output Processing; Programming; Timers, Internal Relays and Counters;
Master & Jump Controls; Data Handling; Analogue Input/Output; Selection of a PLC.
Section-D
Microprocessor and Input/Output System: Control, Microcomputer Structure:
Microcontroller; Applications; Programming Languages; Instruction Sets; Assembly Language
Program; Subroutines;
Design and Mechatronics: Design Process; Traditional and Mechatronics Design: Possible
Mechatronics design solutions for Timed Switch, Wind Screen Wiper Motion, Bath Room Scale, A
Pick & Place Robot, Automatic Camera, Engine Management System & Bar Code Recorder.
Text Books:
1. Mechatronics by W. Bolton – Pearsons Education.
2. Mechatronics- Ramachandran, Vijaraghavan – Wiley India.
Reference Book:
1. Introduction to Mechatronics and Measuring System - David G. Alciation and Michal B. Hist
Tata McGraw Hill.

133
Scheme of Courses and Syllabus for B. Tech (Mechanical Engineering) HP Technical University

SEMESTER – VIII

COMPUTER AIDED DESIGN LAB. ME – 422 (P)

Course Code ME–422 (P) L-0, T-0, P-2


Name of the Course Computer Aided Design Lab.
Lectures to be delivered 26 hours of Lab sessions (2 Hrs per week)
Semester End Examination Max. Marks: 25 Min. Pass Marks: 10 Maximum Time: 3 Hrs
Continuous Assessment Lab work 30%, Lab record 25%, Max. Marks: 25
Viva 25%, Attendance 20%

INSTRUCTIONS FOR PAPER SETTER/CANDIDATES:

Laboratory examination will consist of two parts:


i) Performing a practical examination assigned by the examiner.
ii) Viva-voce examination.
Viva-voce examination will be related to the practical’s performed/projects executed by the
candidate related to the paper during the course of the semester.

LIST OF EXPERIMENTS:

1. Setting up of drawing environment by setting drawing limits, drawing units, naming the drawing,
naming layers, setting line types for different layers using various type of lines in engineering
drawing, saving the file with .dwg extension.

2. Layout drawing of a building using different layer and line colors indicating all Building details.
Name the details using text commands, Make a title Block.

3. To Draw Orthographic projection Drawings (Front, Top and side) of boiler safety valve giving name
the various components of the valve.

4. Make an Isometric dimensioned drawing of a connecting Rod using isometric grid and snap.

5. Draw different types of bolts and nuts with internal and external threading in Acme and square
threading standards. Save the bolts and nuts as blocks suitable for insertion.

6. Draw 3D model of Plummer Block.

7. Draw 3D model of Universal Joint.

8. Any project on 3d modelling with animation.

Notes: Any 2-D and 3-D software may be used to get the desired output. At Least Six Experiments should
be preformed from the above list. Remaining TWO Experiments may be designed and set by the
concerned Institution as per the scope of the syllabus.

134

You might also like