Garment Production Process

Garment production is an organized activity consisting of sequential processes such as laying,

marking, cutting, stitching, checking, finishing, pressing and packaging. This is a process of
converting raw materials into finished products. It will be difficult to maintain the industry if
production is not, up to the mark if the preproduction phase of preparation of material is not
properly carried out.

Ready to wear apparel or garment manufacturing involves many processing steps, beginning
with the idea or design concept and ending with a finished product. Apparel manufacturing
process involves Product Design, Fabric Selection and Inspection, Patternmaking, Grading,
Marking, Spreading, Cutting, Bundling, Sewing, Pressing or Folding, Finishing and Detailing,
Dyeing and Washing, QC etc.

Manufacturing steps

1. Receiving Fabrics

Garment factories receive fabric from overseas textile manufacturers in large bolts with
cardboard or plastic centre tubes or in piles or bags. The fabric typically arrives in steel
commercial shipping containers and is unloaded with a forklift. Garment factories often have a
warehouse or dedicated area to store fabric between arrival and manufacturing.

2. Fabric Relaxing

“Relaxing” refers to the process that allows the material to relax and contract prior to being
manufactured. This step is necessary because the material is continually under tension
throughout the various stages of the textile manufacturing process, including weaving, dyeing,
and other finishing processes. The relaxing process allows fabrics to shrink so that further
shrinkage during customer use is minimized.

Garment manufacturers perform the relaxing process either manually or mechanically. Manual
fabric relaxing typically entails loading the bolt of fabric on a spinner and manually feeding the
material through a piece of equipment that relieves tension in the fabric as it is pulled through.
Mechanical fabric relaxing performs this same process in an automated manner.

Many garment manufacturers will also integrate quality assurance into this process to ensure that
the quality of the fabric meets customer standards. This step is performed by manually spot-
checking each bolt of fabric using a backlit surface to identify manufacturing defects such as
color inconsistency or flaws in the material. Fabrics that fail to meet customer standards are
returned to the textile manufacturer.
 3. Spreading, Form Layout, and Cutting

After the fabric has been relaxed, it is transferred to the spreading and cutting area of the garment
manufacturing facility. The fabric is first to cut into uniform plies and then spread either
manually or using a computer-controlled system in preparation for the cutting process. The fabric
is spread to:

 Allow operators to identify fabric defects;

 Control the tension and slack of the fabric during cutting; and
 Ensure each ply is accurately aligned on top of the others.
 The number of plies in each spread is dependent on the fabric type, spreading method,
cutting equipment, and size of the garment order.

Next, garment forms—or patterns—are laid out on top of the spread, either manually or
programmed into an automated cutting system. Lastly, the fabric is cut to the shape of the
garment forms using either manually operated cutting equipment or a computerized cutting
system.

4. Laying

Laying of paper pattern helps one to plan the placement of the pattern pieces in a tentative
manner.

 Lay large pieces first and then fit in the smaller ones
 It is very economical in laying the pattern and cutting. Even a small amount of material
saved in a single layer will help to bring about a large saving of money as hundreds of
layers of fabric will be laid and cut simultaneously.
 When laying, the length of the garment should be parallel to the selvedge of the material.
Be sure the pattern is placed in the correct grain. Fabrics drape and fall better on the
lengthwise grain and also last longer.
 Parts that have to be placed on the fold should be exactly on the edge of the fold.
 All laying should be done on the wrong side of the material.
 When laying the paper pattern, consider the design of the fabric. Care should be taken to
see that the design runs in the same direction throughout the garment. All checks and
strips should match the seams both lengthwise and across
 5. Marking

This can be a manual or a computerized technique.

Question 1.What Is Clothing?

Answer:

Clothing is one of the three basic needs of human being. Clothing is used for covering human
body or other bodies to fulfill or satisfy the requirements of those bodies with the object of
protection, decoration and identification.

Question 2. What Is Garment?

Answer:

A garment is a piece of clothing.

Question 3. What Is Apparel?

Answer:

Clothes of a particular type when they are being sold in a shop. Apparel can also include things
like name tags, jewelry or other stuff you wear.

Question 5. What Is Design Or Sketch?

Answer:

In clothing industry design means determining the shape and cutting patterns of garments
according to it.

Question 6. What Id Basic Block or Block Pattern?

Answer:

Block patterns are the main or basic patterns which are constructed with definite and standard
body measurement, but they do not possess any style or extra attractiveness or any type of
allowances.

Question 7. What Is A Pattern?

Answer:

It is the model of all components of garments on a hard paper board.

Question 8. Why Pattern Is Produced?

Answer:

To make a set of templates of different components of garments.

To make a large amount of production at a time.

To minimize wastage and cost of garments.

Question 9. What Is Working Pattern Or Production Pattern?

Answer:

These are made on the basic of block pattern or basic block. Each block pattern is drawn or
sketched on the hard paper board with the help of pencil.

Question 10. What Is Invoice?

Answer:

It is one kind of documents which contains the information about selling items. Normally there
are two types of invoice-

Proforma invoice- preliminary,

Commercial invoice-finally.

Question 11. How Grain Line Is Indicated/mentioned In Patterns?

Answer:

By arrow mark.

Question 12. What Is Grain Line?

Answer:

It is the line, which is marked on the patterns of a garment and the line indicates the warp yarn,
as a result, when the pattern is placed in the marking paper then the Grain line follow the warp
yarn of fabric.
Question 13. Define Category?

Answer:

In garments export and import business a definite type of garments is specified by a definite
number which is called category.

Question 14. What Is Approved Sample?

Answer:

The sample which is approved by the buyer is called approved sample.

Question 15. What Is Counter Sample?

Answer:

The manufacturers produce several numbers of samples following the approved sample which is
known as counter samples. They facility the bulk production or hung on production floor.

Question 16. What Do You Mean By Allowance?

Answer:

In case of garments making some additional measurements are added with standard body
measurement which is termed as allowances. This allowance is 1cm or 1inch.

There are two types of allowance-

Trimming allowance.

Sewing allowances.

Question 17. What Is Interlining?

Answer:

A layer of fabric which is used between two layer of fabric to give the particular area desired
shape and to enhance the strength of that particular position which is called interlining. e.g.
collar, cuff.

Question 18. What Are The Types Of Interlining?

Answer:

Sewable interlining,

Fusible interlining.
Question 19. What Do You Mean By Lining?

Answer:

A layer of fabric which is used in the inner side of garments to increase the comfort-ability of the
garments which is called lining.e.g. Suits, coats, ladies and babies wear.

Question 20. What Is Stitch?

Answer:

The unit of sewing or seam.

Question 21. What Is Seam?

Answer:

The line of sewing of one or more than one layers of fabric/the line of joining of fabric.

Question 22. What Do You Mean By Trimmings Or Accessories?

Answer:

Beside fabric the components which are needed to make a complete garment termed as
trimmings.

EX: Button, sewing thread, lining, interning etc.

Question 23. What Is Ticket Number?

Answer:

It indicates the coarseness or fineness of a sewing thread.

Question 24. What Is L/c?

Answer:

L/C means letter of credit. It is one kind of agreement between buyer and seller.

Question 25. What Is Back Taking?

Answer:

During sewing we need to start or end it prior to 1cm or after 1cm respectively to secure the
sewing end. This is termed as back tacking.
Question 26. What Is Bar Tacking?

Answer:

We continue sewing for several times within a very short distance to increase the load or strength
of that particular portion which is termed as bar taking.e.g- edge of pocket, belt loop, Fly piece
etc.

Question 27. What Is Blind Stitch?

Answer:

A particular type of stitch which is not visible from the face side of the garments.

Question 28. What Do You Mean By C.b.l And C.f.l?

Answer:

C.B.L= center back line, C.F.L= center front line

Question 29. What Are Disposable Garments?

Answer:

The garments which are used for one time only called disposable garments.

Ex: Medical garments.

Question 30. What Is Formula Of Marker Efficiency?

Answer:

Marker efficiency= total area of pattern pieces in a marker/total area of marker × 100%

Question 31. What Do You Mean By Garments Size?

Answer:

The size of garments can be expressed by two methods:

Alphabetical expression ex: S, M, L, XL, XXL

Numerical expression ex: 38, 39, 40, 41, 42(in cm or in inch)

Question 32. How Can You Divide All Garments?

Answer:

All types of garments can be divided mainly two groups:

Tops part,

Bottom part.

Question 33. Write Down The Feature Of Pull Oven / Sweater?

Answer:

Warm shirt,

Long sleeve,

Waistband,

Pull on over head.

Question 34. What Is Cloth Spreading/laying?

Answer:

To spread cloth as determined by needed quantity as per marking/ the smooth laying out of fabric
in superimposed layer of specified length.

Question 35. What Do You Mean By Fabric Cutting?

Answer:

To cut the cloth according to marker of patterns for sewing.

Question 36. What Are The Methods Of Fabric Cutting?

Answer:

(A) Manual method

Scissor

Round knife

Band knife

Straight knife

Die cutting

Notcher & -Drill

(B) Computerized method

Straight knife cutting

Water jet cutting

Laser beam cutting

Plasma torch cutting

Question 37.What Is Sample?

Answer:

The garment which is needed for bulk production is called sample garment.

Question 38.What Is Sewing?

Answer:

The process of joining of fabric by the use of needle and sewing thread is called sewing.
Question 39. What Are The Basic Components Of Sewing?

Answer:

Needle

Throat plate

Presser foot

Feed dogs

Sewing thread and fabric.

Question 40. Which Iron Is Used For Industrial Purposes?

Answer:

Steam irons.
Question 41. How Many Types of Label?

Answer:

There are mainly three types of label

Main label,

Size label,

Care label.

The all other of label are called sub label.

Question 42. How Many Types of Woven Fabric?

Answer:

Three types –

Yarn dyed

Solid dyed(s/d)

Denim

Question 43. What Is Lead Time In Garments?

Answer:

Time start from L/C opening or order receive to garments delivery is called lead time.

Lead time — local market = 45 days

Foreign market = 90-120 days

Question 44. What Do You Mean By Quality?

Answer:

Quality is the difference between the products or It is the goodness or badness in a product or the
feather of a pro
Question 45. What Is Stock Lot?

Answer:

When goods are made for buyer but not possible to shipping as a result goods are stain at store.
This goods are called stock lot.

Question 46. What Is The Factor Depends On Action Of Washing?

Answer:

Time

Temperature

Mechanical abrasion

Chemical action

Question 47. Write Some Name Of Sewing Defects?

Answer:

Seam pucker

Broken or open stitch

Staggered stitch

Slipped or skipped stitch

Vertical stitch density.