PARTS CATALOG

Published 2010/8 (Aug.)

0CNP5-G34500
Directions for the Parts Catalog.
1.The parts stipulated in this Parts Catalog are not necessarily standard equipped parts.
2.Parts may change without prior notice.
3.The following is an example of the Parts Catalog format.

0CF10-G21601 29. FUEL INJECTION PUMP(W/BOOST)

(A)=4JH-DT (D)=4JH-DTZA
1 2 (B)=4JH-DTZ (E)=4JH-DTZY 3 5
(C)=4JH-DTZP (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 729595-51390 FUEL INJECTION PUMP 1 1 1 1 1 1
1-1 1 729595-51391 FUEL INJECTION PUMP 1 1 1 1 1 N 1
(A=E00185) (B=E00200)
3 2 26022-060162 SCREW M 6X 16 9 9 9 9 9
3-1 4 2 26022-060162 SCREW M 6X 16 4 4 4 4 4 K
(A=E00156) (B=E00156) (C=E00156) (D=E00156) (E=E00156)
4 2 129470-51040 CAMSHAFT 1 1 1 1 1
5 2 122710-51050 BEARING, ROLLER 2 2 2 2 2
6 2 129470-51060 RETAINER 1 1 1 1 1

Remarks
(1) BOOST COMPEMSATOR TYPE. OPTIONAL
PART, TO E00155,(4JH-DT, 4JH-DTZ

1 Ref. No.
The Ref. No. listed may not be in accordance with the illustration Ref. No.
(Ex.) Illustration No. List Ref No.
1 1 (Before change) 1- 1 (After change)
For interchangeable symbols N, R and K, illustrations for new parts may be abbreviated.
2 Lev. (Level)
Level indication
The numbers below indicate the level of relativity towards the main part.
1 ----- Main parts (Assembly parts)
2 ----- Sub component included in ” 1 ”.
3 ----- Sub component included in ” 2 “.
Note) Parts that are not for sale are partially illustrated but not listed.
3 Interchangeability Mark
When a part change takes place, one of the following interchangeability symbols is indicated beside the part.
Symbol Interchangeability Contents note
N Old
Yes
New New Part is interchangeable for Old Part but Old Part is not interchangeable
No for New Part.
Q Old
No New Part is not interchangeable for Old Part but Old Part is interchangeable
New
Yes for New Part.
Yes
R Old New New/ Old Parts are both interchangeable.
Yes
No
S Old New New/ Old Parts are both not interchangeable.
No
W Part newly added.
Z Part discontinued.
F Not interchangeable by a single part but interchangeable together with related
parts.
K Changes only for used parts quantities.

4 Effective Machine No.

When a part changes, the effective Machine No. will be indicated in the (A)-(F) column.
Product Symbol Product No. Product Symbol Product No.
C Clutch No. Compressor No. F Machine No. (Agricultural Equip.)
D Drive No. M Machine No.
E Engine No.
Note 1) A date may follow the symbol. (Ex.) 1996.01
Note 2) ” XXXXX ” and ” ZZZZZ ” are for parts that could not be predicted or for engine models that could
not be identified.
Note 3) (A=E00185) is the E (Engine Serial Number) for the column (A) model (in this case 4JH-DT) after
the parts design change.
5 Remarks Mark
Figures or alphabets (symbols) are entered in the remarks column.
The comments (remarks) on parts that are indicated at the bottom of the illustration are the same symbols as
those stated above.
 MODEL : AP4
CONTENTS
PC NO : 0CNP5-G34500

Fig.No. GROUP NAME Fig.No. GROUP NAME

TRANSMISSION SECTION 26. PLANTING INPUT CENTER
1. TRANSMISSION CASE 27. PLANTING ARM SHAFT CENTER
2. MAIN SHAFT 28. COUNTER SHAFT
3. CHANGE SHAFT 29. VERTICAL FEED DRIVE SHAFT
4. SIDE CLUTCH SHAFT 30. FEED SCREW
5. SPACE CHANGE SHAFT 31. FEED SHAFT
6. PLANTING DRIVE 32. HORIZONTAL FEED GEAR(26TH PICK
7. PLANTING CLUTCH SHAFT 33. HORIZONTAL FEED GEAR(20TH PICK
8. PLANTING CLUTCH 34. DRIVE SHAFT(FRONT
9. TRANSMISSION CONTROL 35. DRIVE SHAFT(REAR
10. TRANSMISSION CLUTCH 36. PLANTING ARM SHAFT
11. AXLE CASE 37. PLANTING ARM
38. DRIVEN ARM
TRAVELING SECTION 39. TINE N4-N
12. RUBBER LUGGED WHEEL(660
13. HYDRAULIC PUMP SEEDLING STAND SECTION
14. PUMP DRIVE 40. SEEDLING TRAY
15. HYDRAULIC HOSE 41. SEEDLING STAND ACCESSORIES
16. PITCHING CYLINDER 42. MAT RETAINER
17. PITCHING SENSOR 43. VERTICAL FEEDER EQUIPMENT
18. STAND 44. VERTICAL FEED LINK
19. SWING EQUIPMENT 45. TRAY SUPPORT UNIT
20. CENTER FLOAT 46. SEEDLING PICK-UP PLATE
21. SIDE FLOAT
HANDLE SECTION
PLANTING SECTION 47. HANDLE
22. CENTRAL FRAME 48. REAR SIDE FRAME
23. PLANTING CASE CENTER 49. CHANGE CONTROL
24. SIDE FRAME 50. SWING CONTROL
25. SIDE CASE 51. MAIN CLUTCH LEVER
 MODEL : AP4
CONTENTS
PC NO : 0CNP5-G34500

Fig.No. GROUP NAME Fig.No. GROUP NAME

52. SIDE CLUTCH LEVER
53. PLANT CLUTCH LEVER
54. PLANTING DEPTH LEVER
55. VERTICAL PICK ADJUST
56. ENGINE CONTROL

ENGINE RELATED SECTION

57. ENGINE RELATED
58. ENGINE DRIVE
59. HOOD
60. FUEL TANK
61. BELT COVER
62. ENGINE BASE

MARKER & ACCESSORIES SECTION

63. WIRE DRAWING MARKER
64. SEEDLING TRAY
65. SPARE SEEDLING TRAY
66. LEVELER
67. LABEL
68. LABEL(SAFETY
69. ACCESSORY
70. ACCESSORY(TINE CAGE
71. ACCESSORY(PLATE, SEEDLING PICK
0CNP5-G34500 0CNP5-G34500 1. TRANSMISSION CASE
Fig.1. TRANSMISSION CASE (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-11010 CASE, TRANSMISSION L 1
2 1 1C730C-11050 CASE, TRANSMISSION R 1
3 1 1C730C-11070 BOLT, UPPER 8X12 2
4 1 1C730C-11400 PLUG, OIL FEED 1
5 1 22217-080000 WASHER, 8 1
6 1 23490-080002 PLUG 8 1
7 1 23490-080002 PLUG 8 1
8 1 24311-000180 O-RING 1A P-18.0 1
9 1 26013-080302 BOLT M 8X 30 8
10 1 26116-080752 BOLT M 8X 75 PLATED 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 2. MAIN SHAFT
Fig.2. MAIN SHAFT (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-12000 SHAFT, MAIN 1
2 1 1C730C-12030 GEAR, MAIN SHAFT 19T 1
3 1 1C729C-12050 GEAR, MAIN SHAFT 10 1
4 1 1C730C-12060 GEAR, MAIN SHAFT 12T 2
5 1 1C730C-12070 GEAR, MAIN SHAFT 14T 1
6 1 1C730C-12080 GEAR, MAIN SHAFT 15T 1
7 1 1C730C-12110 COLLAR, 2
8 1 1C730C-12120 COLLAR, MAIN SHAFT 9 2
9 1 1C730C-12130 COLLAR,MAIN SHAFT 13 1
10 1 1C730C-12140 COLLAR,MAIN SHAFT 15 1
11 1 1C729C-12150 PULLEY,MAIN 1
12 1 1C730C-12250 SPACER, 12.5X20X1 1
13 1 22242-000120 CIRCLIP 12 1
14 1 22242-000130 CIRCLIP 13 1
15 1 22242-000140 CIRCLIP 14 1
16 1 24101-062024 BALL BEARING 1
17 1 24422-153007 SEAL TC15 30 07, OIL 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 3. CHANGE SHAFT
Fig.3. CHANGE SHAFT (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-12200 SHAFT, CHANGE 8 1
2 1 1C729C-12230 GEAR, CHANGE 25-32 1
3 1 24101-062024 BALL BEARING 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 4. SIDE CLUTCH SHAFT
Fig.4. SIDE CLUTCH SHAFT (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-13000 SHAFT, SIDE CLUTCH 2
2 1 1C729C-13030 GEAR, SIDE CLUTCH 53 1
3 1 1C730C-13040 SHIFTER, SIDE CLUTCH 2
4 1 1C730C-13060 SPRING, SIDE CLUTCH 2
5 1 1C730C-13070 SPACER, 24X30X1.6 2
6 1 24101-060044 BALL BEARING #6004 2
7 1 24190-080002 BALL, STEEL 1/4 6
8 1 24421-203208 SEAL TC20 32 08, OIL 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 5. SPACE CHANGE SHAFT
Fig.5. SPACE CHANGE SHAFT (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-12250 SPACER, 12.5X20X1 2
2 1 1C730C-13240 SPACER, 15X22X1 2
3 1 1C730C-13300 SHAFT, PTO 1
4 1 1C729C-13320 GEAR, 1
5 1 1C730C-13350 GEAR, PTO 28 1
6 1 1C729C-13360 GEAR, 1
7 1 1C729C-19050 GEAR, 1
8 1 22242-000120 CIRCLIP 12 1
9 1 22242-000150 CIRCLIP 15 1
10 1 22242-000150 CIRCLIP 15 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 6. PLANTING DRIVE
Fig.6. PLANTING DRIVE (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-14210 TRANSMISSION,PLANT 1
2 1 22252-000401 CIRCLIP 40 1
3 1 24101-062034 BALL BEARING 1
4 1 24421-174009 SEAL TC17 40 09, OIL 1
5 1 27260-150000 PLUG 15,BORE 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 7. PLANTING CLUTCH SHAFT
Fig.7. PLANTING CLUTCH SHAFT (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-14300 SHAFT ASSY, 1
2 2 1C730C-14070 SPRING,SAFETY CLUTCH 1
3 2 1C730C-14080 BRACKET, 1
4 2 1C730C-14120 LINER,17X24X1 4
5 2 22242-000170 CIRCLIP 17 1
6 1 24421-173007 SEAL TC17 30 07, OIL 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 8. PLANTING CLUTCH
Fig.8. PLANTING CLUTCH (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-14300 FORK,PLANTING CLUTCH 1
2 1 1C730C-14400 ARM, PLANTING CLUTCH 1
3 1 22137-080000 WASHER 8, POLISHED 1
4 1 24311-000090 O-RING 1A P-9.0 1
5 1 26051-080002 NUT M 8 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 9. TRANSMISSION CONTROL
Fig.9. TRANSMISSION CONTROL (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-15000 SHAFT, CHANGE FORK 1
2 1 1C730C-15030 FORK, CHANGE 1
3 1 1C730C-15050 ARM, CHANGE A 1
4 1 1C729C-15100 SHAFT, 1
5 1 1C730C-15130 FORK, PTO CHANGE 1
6 1 1C730C-15210 SHAFT,CHANGE CONTROL 1
7 1 1C730C-15250 ARM, CHANGE B 1
8 1 1C730C-15290 SEAL, OIL TC13287 1
9 1 1C730C-15300 ARM, PTO CHANGE 1
10 1 1C730C-15370 FITTING,CHANGE SHAFT 1
11 1 1C730C-15750 SPRING,FORK 1
12 1 1C730C-15750 SPRING,FORK 1
13 1 22351-030020 SPRING PIN 3X20 1
14 1 22351-030020 SPRING PIN 3X20 1
15 1 22351-030020 SPRING PIN 3X20 1
16 1 22351-050020 SPRING PIN 5X20 1
17 1 22351-050020 SPRING PIN 5X20 1
18 1 22351-050020 SPRING PIN 5X20 1
19 1 24190-100002 BALL 5/16 1
20 1 24190-100002 BALL 5/16 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 10. TRANSMISSION CLUTCH
Fig.10. TRANSMISSION CLUTCH (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-15350 FORK, SIDE CLUTCH 2
2 1 1C730C-15450 ARM, SIDE CLUTCH L 1
3 1 1C730C-15500 ARM, SIDE CLUTCH R 1
4 1 22351-030018 SPRING PIN 3X18 2
5 1 22351-050018 SPRING PIN 5X18 2
6 1 24311-000090 O-RING 1A P-9.0 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 11. AXLE CASE
Fig.11. AXLE CASE (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-11450 CAP, 54 2
2 1 1C730C-13190 SPROCKET, 428X10T 2
3 1 1C729C-16050 CASE,AXLE SHAFT L 1
4 2 1C6220-13350 OIL SEAL TCFY2540119 1
5 1 1C729C-16060 CASE AXLE SHAFT R 1
6 2 1C6220-13350 OIL SEAL TCFY2540119 1
7 1 1C730C-16240 COLLAR, 27 2
8 1 22242-000160 CIRCLIP 16 2
9 1 22252-000471 CIRCLIP 47 4
10 1 24104-062044 BALL BEARING 2
11 1 24104-063034 BALL BEARING 2
12 1 24421-204707 SEAL TC204707,OIL 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 12. RUBBER LUGGED WHEEL(660
Fig.12. RUBBER LUGGED WHEEL(660 (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-21010 WHEEL,RUBBER LUG 660 2
2 1 1C730C-21150 PIN, AXLE SHAFT 2
3 1 1C730C-52320 PIN, SNAP 8 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 13. HYDRAULIC PUMP
Fig.13. HYDRAULIC PUMP (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-22050 PULLEY, PUMP T 1
2 1 1C730C-22050 PUMP(I ASSY 1
3 2 1C730C-22060 PUMP(I KK ASY 1
4 2 1C730C-22140 FULCRUM, 1
5 2 1C730C-22200 ARM, VALVE 1
6 2 1C730C-22240 STOPPER, VALVE EX 1
7 2 1C730C-67030 ELBOW,90 1
8 2 22522-040130 KEY, WOODRUFF 4X13 1
9 1 22137-080000 WASHER 8, POLISHED 1
10 1 22217-080000 WASHER, 8 1
11 1 26014-080202 BOLT M 8X 20 3
12 1 26716-080002 NUT M 8 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 14. PUMP DRIVE
Fig.14. PUMP DRIVE (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-22030 ROLLER, TENSION 29 1
2 1 1C729C-22100 ARM,TENSION(OIL PUMP 1
3 1 1C730C-22120 SPRING, TENSION 1
4 1 1C729C-22150 V BELT,M23 (RED 1
5 1 22137-100000 WASHER 10,POLISHED 1
6 1 22242-000100 CIRCLIP 10 1
7 1 22272-000080 CIRCLIP E- 8 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 15. HYDRAULIC HOSE
Fig.15. HYDRAULIC HOSE (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-22300 HOSE, HYDRAULIC 1
2 1 1C729C-22400 CLUMP, HOSE 1
3 1 1C730C-52830 TUBE, SPIRAL 70 2
4 1 1C730C-52830 TUBE, SPIRAL 70 1
5 1 1E8559-84970 BAND 140 2
6 1 23010-010000 CLAMP 10 2
7 1 23091-060400 PIPE 6X400,VINYL 1
8 1 26014-080162 BOLT M 8X 16 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 16. PITCHING CYLINDER
Fig.16. PITCHING CYLINDER (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-22400 CYLINDER ASSY, 1
2 2 1C730C-22500 RUM, 45X212 1
3 2 1C730C-22510 SEAL, PENTA 45 1
4 2 1C730C-22520 SCRAPER, SLR 45 1
5 2 1C730C-22530 CAP, UNLOAD 1
6 2 1C730C-22600 SHIM, 6X0.1 1
7 2 23414-100014 PACKING 10,ROUND 1
8 2 24190-070002 BALL 7/32 1
9 2 24311-000450 O-RING 1A P-45.0 1
10 1 22217-140000 SPRING WASHER 14 1
11 1 26014-080162 BOLT M 8X 16 2
12 1 26736-140002 NUT M14 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 17. PITCHING SENSOR
Fig.17. PITCHING SENSOR (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-23010 ARM, SENSOR 1
2 1 1C730C-23100 ARM, 57 1
3 1 1C730C-23200 SPRING, SENSOR 1
4 1 1C730C-23220 COVER, SPRING 1
5 1 1C730C-23230 NUT, ADJUST 8 1
6 1 1C730C-23260 NUT, L 8 1
7 1 1C730C-23270 SPRING, CONNECTOR 1
8 1 1C730C-23300 TURNBUCKLE 8X225 1
9 1 1C729C-44050 ROLLER, SUPPORT 1
10 1 1C730C-52320 PIN, SNAP 8 1
11 1 1C730C-52320 PIN, SNAP 8 1
12 1 1C730C-52400 BUSH, COLLAR 2
13 1 22117-080000 WASHER 8 2
14 1 22137-080000 WASHER 8, POLISHED 2
15 1 22137-100000 WASHER 10,POLISHED 1
16 1 22351-040016 SPRING PIN 4X16 1
17 1 22417-200160 COTTER PIN 2.0X16 1
18 1 22451-100080 WIRE, 1.0 X 80 1
19 1 22487-080160 PIN, H8X16 1
20 1 26716-080002 NUT M 8 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 18. STAND
Fig.18. STAND (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-23260 STAND CMP 1
2 1 1C730C-23400 SPRING, STAND 1
3 1 22137-100000 WASHER 10,POLISHED 1
4 1 22417-250200 COTTER PIN 2.5X20 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 19. SWING EQUIPMENT
Fig.19. SWING EQUIPMENT (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-24010 ARM, SLIDING 1
2 1 1C730C-24050 ROD, SWING 2
3 1 1C730C-24110 ARM, SWING L 1
4 1 1C730C-24120 ARM, SWING R 1
5 1 1C730C-24200 SHAFT, SWING ARM 1
6 1 1C730C-24300 BAR, SWING 2
7 1 1C730C-24410 PIN,FLAT HEAD 2
8 1 1C730C-43510 SPACER, 22.5X28X1 2
9 1 1C730C-46290 WASHER, 9X30X3 2
10 1 1C730C-47380 PIN, HEADING 10X17 2
11 1 1C727C-65700 PIN, SNAP 10 2
12 1 22417-200160 COTTER PIN 2.0X16 2
13 1 22417-200160 COTTER PIN 2.0X16 2
14 1 22417-200160 COTTER PIN 2.0X16 2
15 1 22417-250200 COTTER PIN 2.5X20 1
16 1 22487-100240 PIN 10X 24 2
17 1 22487-100300 PIN 10X 30 2
18 1 22487-120400 PIN, H12X40 1
19 1 24341-000220 O-RING, 1A S22.0 6
20 1 26013-080162 BOLT W/WASHER M8X16 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 20. CENTER FLOAT
Fig.20. CENTER FLOAT (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-26050 FLOAT, CENTER 1
2 1 1C730C-26200 FITTING, FLOAT 1
3 1 1C730C-26250 FITTING, FLOAT 1
4 1 1C730C-52320 PIN, SNAP 8 1
5 1 1C730C-62160 WASHER,BELT COVER 4
6 1 1C730C-73350 ARM, FLOAT 1
7 1 22417-200160 COTTER PIN 2.0X16 1
8 1 22417-200160 COTTER PIN 2.0X16 1
9 1 22487-080650 PIN 8X 65 1
10 1 22487-081000 PIN, H8X100 1
11 1 22487-100600 PIN, H10X60 1
12 1 26013-080162 BOLT W/WASHER M8X16 4

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 21. SIDE FLOAT
Fig.21. SIDE FLOAT (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-26100 FLOAT, SIDE L 1
2 1 1C730C-26110 FLOAT, SIDE R 1
3 1 1C730C-26200 FITTING, FLOAT 2
4 1 1C730C-26250 FITTING, FLOAT 2
5 1 1C730C-26310 ARM,SIDE FLOAT 2
6 1 1C730C-26350 SPACER, 10X32X4 4
7 1 1C730C-26800 MARKER, SIDE L 1
8 1 1C730C-26810 MARKER, SIDE R 1
9 1 1C730C-35640 SPRING, 2
10 1 1C730C-52320 PIN, SNAP 8 2
11 1 1C730C-52320 PIN, SNAP 8 2
12 1 1C730C-62160 WASHER,BELT COVER 4
13 1 1C730C-62160 WASHER,BELT COVER 4
14 1 1C727C-65700 PIN, SNAP 10 2
15 1 1C730C-73350 ARM, FLOAT 2
16 1 22117-080000 WASHER 8 4
17 1 22417-200160 COTTER PIN 2.0X16 2
18 1 22487-080350 PIN 8X 35 2
19 1 22487-080650 PIN 8X 65 2
20 1 22487-081000 PIN, H8X100 2
21 1 26013-080162 BOLT W/WASHER M8X16 4
22 1 26013-080162 BOLT W/WASHER M8X16 4
23 1 26014-080162 BOLT M 8X 16 4

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 22. CENTRAL FRAME
Fig.22. CENTRAL FRAME (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-31010 FRAME, CENTER 1
2 1 1C729C-31150 PLATE, SUPPORT 1
3 1 26014-080202 BOLT M 8X 20 1
4 1 26014-080202 BOLT M 8X 20 1
5 1 26014-080252 BOLT M 8X 25 4
6 1 26014-080252 BOLT M 8X 25 1
7 1 26051-080002 NUT M 8 4

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 23. PLANTING CASE CENTER
Fig.23. PLANTING CASE CENTER (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-11070 BOLT, UPPER 8X12 2
2 1 1C730C-11070 BOLT, UPPER 8X12 2
3 1 1C730C-31200 CASE, PLANTING L 1
4 1 1C730C-31250 CASE, PLANTING R 1
5 1 1C730C-31290 PACKING, 1
6 1 7C729C-31300 CASE, SCREW PL ASY 1
7 1 1C730C-31310 PLATE,SCREW CASE FIX 1
8 1 1C730C-31340 PACKING,FIXING PLATE 1
9 1 1C730C-31350 COVER, SCREW CASE L 1
10 1 1C730C-31360 COVER, SCREW CASE R 1
11 1 1C730C-31390 PACKING, SCREW CASE 2
12 1 1C730C-31400 TIE ROD, 4
13 1 1C730C-31570 COVER, GEAR 1
14 1 1C730C-31580 PACKING, GEAR COVER 1
15 1 1C730C-41320 STOPPER, CAM 1
16 1 1C730C-48150 CAP 15,RUBBER 1
17 1 1S6000-61220 BUSH,COLLAR 2
18 1 1E8559-82820 CLIP COD-173219 1
19 1 22190-060001 SEAL WASHER 6(NUT) 6
20 1 22217-050000 SPRING WASHER 5 1
21 1 22312-060100 PARALLEL PIN, M6X10 2
22 1 23414-060000 GASKET 6, ROUND 2
23 1 26014-080602 BOLT, M8X60 4
24 1 26022-060122 SCREW M 6X 12 1
25 1 26366-050002 U-NUT M 5 7
26 1 26557-060252 SCREW, M6X25 2
27 1 26716-050002 NUT, M5 1
28 1 26716-060002 NUT 6 6

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 24. SIDE FRAME
Fig.24. SIDE FRAME (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-31500 FRAME, SIDE CMP 2
2 1 1C6550-31700 PLUG 45,BORE 2
3 1 26014-080202 BOLT M 8X 20 6
4 1 26014-080202 BOLT M 8X 20 8

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 25. SIDE CASE
Fig.25. SIDE CASE (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-31600 CASE,PLANTING SIDE L 1
2 1 1C730C-31610 CASE,PLANTING SIDE R 1
3 1 1C6550-31620 COVER, BLIND 2
4 1 1C730C-31630 PACKING, SIDE CASE 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 26. PLANTING INPUT CENTER
Fig.26. PLANTING INPUT CENTER (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-14210 TRANSMISSION,PLANT 1
2 1 1C730C-32010 SHAFT,PLANTING INPUT 1
3 1 22252-000401 CIRCLIP 40 1
4 1 24104-062034 BALL BEARING 1
5 1 24421-174009 SEAL TC17 40 09, OIL 1
6 1 27260-150000 PLUG 15,BORE 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 27. PLANTING ARM SHAFT CENTER
Fig.27. PLANTING ARM SHAFT CENTER (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C6054-31590 OIL SEAL 17309195 2
2 1 1C730C-32050 SHAFT, PLANTING ARM 1
3 1 1E4060-74090 LINER 17X24X1 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 28. COUNTER SHAFT
Fig.28. COUNTER SHAFT (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-32401 SHAFT,INTERMEDIATE 1
2 1 25210-430421 CHAIN 43X42,ROLLER 1
3 1 1S6000-61220 BUSH,COLLAR 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 29. VERTICAL FEED DRIVE SHAFT
Fig.29. VERTICAL FEED DRIVE SHAFT (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-32450 PLUG, 8 2 Z
(A=F000009)
2 1 1C730C-32560 SHAFT, FEED 1
2-1 1 1C730C-32561 SHAFT, FEED 1 N
(A=F000009)
3 1 1C730C-32610 ARM, VERTICAL FEED 1
4 1 1C730C-71850 WASHER, 3 1
5 1 22351-050020 SPRING PIN 5X20 1
6 1 22417-250200 COTTER PIN 2.5X20 1
7 1 24311-000120 O-RING 1A P-12.0 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 30. FEED SCREW
Fig.30. FEED SCREW (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1E4370-24010 LINER 12X17X1K 2
2 1 1C730C-33050 SCREW, FEED 1
3 1 1C730C-33100 BRACKET, 1
4 1 1C730C-34130 SLIDING BLOCK, 1
5 1 1C730C-35060 CAM, VERTICAL FEED 2
6 1 1C730C-35070 SPRING, FEED SCREW 2
7 1 22272-000120 CIRCLIP E-12 2
8 1 22512-050200 KEY, 5X20 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 31. FEED SHAFT
Fig.31. FEED SHAFT (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C6280-31310 OIL SEAL TC163212 2
2 1 1C730C-35150 SHAFT, FEED 1
3 1 1C730C-35160 CAP, 16 2
4 1 22351-050025 SPRING PIN 5X25 2
5 1 22451-160000 WIRE, 1.6 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 32. HORIZONTAL FEED GEAR(26TH PICK
Fig.32. HORIZONTAL FEED GEAR(26TH PICK (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-33300 GEAR, FEED 26 1
2 1 1C730C-35300 GEAR, FEED 14A 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 33. HORIZONTAL FEED GEAR(20TH PICK
Fig.33. HORIZONTAL FEED GEAR(20TH PICK (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-35350 GEAR, FEED 14B 1
2 1 1C730C-35360 GEAR, FEED 20 B 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 34. DRIVE SHAFT(FRONT
Fig.34. DRIVE SHAFT(FRONT (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-32250 GEAR, BEVEL F16 2
2 1 1C730C-32500 SHAFT, DRIVE 2
3 1 1C6550-32600 BEARING 123615 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 35. DRIVE SHAFT(REAR
Fig.35. DRIVE SHAFT(REAR (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-32250 GEAR, BEVEL F16 2
2 1 1C730C-32260 GEAR, BEVEL R16A 2
3 1 1C730C-32550 SHAFT, DRIVE 2
4 1 1C6550-32600 BEARING 123615 2
5 1 1S6000-61220 BUSH,COLLAR 2
6 1 24421-122207 SEAL TC12 22 07, OIL 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 36. PLANTING ARM SHAFT
Fig.36. PLANTING ARM SHAFT (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C6290-32090 OIL SEAL 2
2 1 1C730C-32270 GEAR, BEVEL R16B 2
3 1 1C730C-32300 SHAFT, PLANTING ARM 2
4 1 1C730C-44760 LINER,CONTROL LEVER 4
5 1 22242-000140 CIRCLIP 14 4
6 1 22252-000401 CIRCLIP 40 2
7 1 24104-062034 BALL BEARING 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 37. PLANTING ARM
Fig.37. PLANTING ARM (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-11470 SPACER, 10.5X18X1 8
2 1 1C6054-31590 OIL SEAL 17309195 4
3 1 1C6054-32350 OIL SEAL TC3Y 4
4 1 1C730C-34200 JOINT, CHAIN 40 4
5 1 1C730C-36030 COVER, PLANTING ARM 4
6 1 1C730C-36040 PACKING,PLANTING ARM 4
7 1 1C730C-36050 ARM, CRANK 4
8 1 1C730C-36070 CAM, PUSH 4
9 1 1C730C-36080 LEVER, PUSH 4
10 1 1C730C-36280 PLUG,BORE 28 4
11 1 1C730C-36300 PLUG,BORE 30 4
12 1 1C730C-36901 ARM, PLANTING BB 4
13 1 1C730C-36940 SHAFT, PASSIVE ARM 4
14 1 1C730C-39210 SPRING, PUSH B 4
15 1 1C730C-66250 RUBBER, CUSHION 50 4
16 1 1C730C-66260 BASE, CUSHION RUBBER 4
17 1 1C730C-66320 ROD, PUSH 4
18 1 1C726C-66790 CAP, RUBBER 12 4
19 1 1C726C-66810 SCREW, 5X16 24
20 1 1C730C-66890 BUSH, 8X12X31(F112 4
21 1 1C6560-66900 SCRAPER 8,ROD 4
22 1 1C6560-66910 PACKING 8,ROD 4
23 1 1C730C-95590 WASHER, 10.2X24X2.5 4
24 1 22157-080000 WASHER 8 4
25 1 22242-000120 CIRCLIP 12 4
26 1 22252-000280 CIRCLIP 28 8
27 1 22252-000300 CIRCLIP 30 8
28 1 22287-080000 LOCKING WASHER 8
29 1 22312-060180 PARALLEL PIN, M6X18 4
30 1 24101-060014 BALL BEARING 8
31 1 24101-062004 BALL BEARING 8
32 1 26016-080252 BOLT M 8X 25 4
33 1 26716-080002 NUT M 8 4
34 1 26757-080002 LOCK NUT M 8 PLATED 4

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 38. DRIVEN ARM
Fig.38. DRIVEN ARM (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C6054-32350 OIL SEAL TC3Y 4
2 1 1C730C-34460 SHAFT, ARM S 4
3 1 1C730C-36280 PLUG,BORE 28 4
4 1 1C730C-36910 ARM, PASSIVE BB 4
5 1 22287-100000 WASHER 10 4
6 1 22242-000120 CIRCLIP 12 4
7 1 22252-000280 CIRCLIP 28 8
8 1 24101-060014 BALL BEARING 8
9 1 26776-100002 LOCK NUT M10 PLATED 8

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 39. TINE N4-N
Fig.39. TINE N4-N (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C726C-34380 SHIM, TYPE B TINE 32 8
2 1 1C729C-66990 TINE, N4-SHAPE L13 4
3 1 26016-060182 BOLT M6X 18 4

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 40. SEEDLING TRAY
Fig.40. SEEDLING TRAY (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 7C729C-41000 TRAY, SEEDLING PL 1
2 1 1C730C-42790 STOPPER,FOLLOWER CAM 1
3 1 1C730C-44100 SHOE,SEEDLING BEARER 4

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 41. SEEDLING STAND ACCESSORIES
Fig.41. SEEDLING STAND ACCESSORIES (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-42100 PLATE ASSY, MAT L 1
2 1 1C730C-42150 PLATE ASSY, MAT R 1
3 1 1C730C-42200 ARM,SEEDLING TRAY L 1
4 1 1C730C-42210 ARM,SEEDLING TRAY R 1
5 1 1C730C-42250 BOLT, 10X30 2
6 1 1C730C-42300 PLATE, SEEDLING KEEP 1
7 1 1C730C-42350 ROD ASSY, 1
8 1 1C730C-42550 PLATE ASSY, SUPPORT 1
9 1 22137-060000 WASHER 6, POLISHED 3
10 1 22217-060000 SPRING WASHER 6 3
11 1 26014-060122 BOLT M 6X 12 10
12 1 26014-060122 BOLT M 6X 12 1
13 1 26014-060162 BOLT M 6X 16 4
14 1 26014-060162 BOLT M 6X 16 4
15 1 26116-060122 BOLT 6X12 3
16 1 26635-060002 WING NUT M 6 3
17 1 26756-100002 LOCK NUT M10 PLATED 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 42. MAT RETAINER
Fig.42. MAT RETAINER (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-42330 RETAINER, MAT 4
2 1 1C730C-42340 BRACKET,MAT RETAINER 4
3 1 22217-060000 SPRING WASHER 6 8
4 1 26116-060122 BOLT 6X12 8
5 1 26635-060002 WING NUT M 6 8

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 43. VERTICAL FEEDER EQUIPMENT
Fig.43. VERTICAL FEEDER EQUIPMENT (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-12670 WASHER, 12.2X25X1 3
2 1 1C730C-42090 SPRING,CAM RETURN 1
3 1 1C730C-43000 SHAFT, MAT 1
4 1 1C730C-43050 PIPE,SEEDLING FEED L 1
5 1 1C730C-43060 PIPE,SEEDLING FEED R 1
6 1 1C730C-43080 BEARING, 4
7 1 1C730C-43120 PIN, FEED 2
8 1 1C730C-43150 ROLLER, FEED A 8
9 1 1C730C-43160 ROLLER, FEED B 8
10 1 1C730C-43180 RUBBER, BRAKE 2
11 1 1C730C-43200 SPROCKET, 9 1
12 1 1C730C-43210 SPROCKET, 9 1
13 1 1C730C-43550 CAM, FOLLOWER 1
14 1 1C730C-43560 SHAFT, FOLLOWER CAM 1
15 1 1C6301-43580 BUSH 12X18X5 2
16 1 1C730C-43600 BRACKET, FEED 1
17 1 1C730C-54400 BUSH, 12X16X18 2
18 1 1C730C-73270 CLUTCH, 1
19 1 1C730C-83500 ROLLER, FEED A 8
20 1 1C730C-83510 ROLLER, FEED B 8
21 1 1C730C-83900 COVER, CHAIN 1
22 1 22137-100000 WASHER 10,POLISHED 1
23 1 22351-030016 SPRING PIN 3X16 2
24 1 22351-050016 SPRING PIN 5X16 1
25 1 22351-050016 SPRING PIN 5X16 2
26 1 22351-050020 SPRING PIN 5X20 1
27 1 22417-200160 COTTER PIN 2.0X16 2
28 1 22857-500141 SCREW M5X14,TAPPING 8
29 1 24311-000120 O-RING 1A P-12.0 2
30 1 24430-122204 OIL SEAL VC12224 2
31 1 25210-430321 CHAN, ROLLER 1
32 1 26014-060202 BOLT M 6X 20 2
33 1 26023-050102 SCREW M 5X 10 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 44. VERTICAL FEED LINK
Fig.44. VERTICAL FEED LINK (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-43010 CAM ASSY, 1
2 1 1C730C-43100 ROD, VERTICAL FEED 1
3 1 1C6557-43160 ELBOW 6R 1
4 1 1C730C-43610 SPRING, FEED 1
5 1 1C730C-47660 SCREW, NUT 6 L 1
6 1 1C730C-52400 BUSH, COLLAR 2
7 1 1C6670-83220 BALL 6L,LINK 1
8 1 22117-100000 WASHER 10 1
9 1 22417-250200 COTTER PIN 2.5X20 1
10 1 26051-060002 NUT M 6 2
11 1 26716-060002 NUT 6 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 45. TRAY SUPPORT UNIT
Fig.45. TRAY SUPPORT UNIT (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-43480 PLATE, MISS PROTECT 2
2 1 1C730C-43500 SPRING, MISS PROTECT 2
3 1 1C730C-44010 ARM, FEED 3
4 1 1C730C-44020 COLLAR, FEED 3
5 1 1C729C-44050 ROLLER, SUPPORT 2
6 1 1C730C-44600 FULCRUM, TRAY 2
7 1 22117-080000 WASHER 8 2
8 1 22272-000060 CIRCLIP E- 6 2
9 1 26014-080202 BOLT M 8X 20 3
10 1 26051-080002 NUT M 8 2
11 1 26716-080002 NUT M 8 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 46. SEEDLING PICK-UP PLATE
Fig.46. SEEDLING PICK-UP PLATE (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-44500 PLATE ASSY, PLANT 1
2 2 1C730C-44350 REINFORCEMNT, L 4
3 2 1C730C-44360 REINFORCEMNT, R 4
4 2 1C730C-44510 PLATE, PLANT 1
5 2 22137-050000 WASHER 5, POLISHED 8
6 2 22137-050000 WASHER 5, POLISHED 8
7 2 22217-050000 SPRING WASHER 5 8
8 2 22217-050000 SPRING WASHER 5 8
9 2 26116-050122 BOLT, M5X12 8
10 2 26577-050122 SCREW M 5X 12 8
11 2 26717-050002 NUT 5 8
12 1 26014-080302 BOLT M 8X 30 3

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 47. HANDLE
Fig.47. HANDLE (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-51010 HANDLE,CMP 1
2 1 1C729C-51350 GRIP,HANDLE 2
3 1 1C730C-51410 CAP HANDLE 2
4 1 7C729C-51400 COVER, LEVER PL ASY 1
5 1 1C730C-63200 SCREW,TAPPING 5X14 2
6 1 1E8559-84960 CABLE BAND 250 1
7 1 1E8559-84960 CABLE BAND 250 3
8 1 26014-080252 BOLT M 8X 25 2
9 1 26051-080002 NUT M 8 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 48. REAR SIDE FRAME
Fig.48. REAR SIDE FRAME (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-51500 FRAME, REAR SIDE L 1
2 1 1C729C-51600 FRAME, REAR SIDE R 1
3 1 26014-080202 BOLT M 8X 20 8
4 1 26014-080802 BOLT W/WASHER 8X80 4

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 49. CHANGE CONTROL
Fig.49. CHANGE CONTROL (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-52010 PLATE,SHIFT CONTROL 1
2 1 1C729C-52160 LEVER,PTOCHANGE 1
3 1 1C729C-52250 ARM,CHANGE CMP 1
4 1 1C729C-52300 LEVER,CHANGE 1
5 1 1C730C-52300 GRIP, CHANGE 1
6 1 1C729C-52310 GUIDE, CHANGE 1
7 1 1C730C-52600 NUT,6X43 1
8 1 26014-060162 BOLT M 6X 16 2
9 1 26112-060302 BOLT M 6X 30 1
10 1 26716-060002 NUT 6 1
11 1 26018-080162 BOLT M 8X 16 2
12 1 26016-060122 BOLT M 6X 12 5
13 1 22117-120000 WASHER 12 1
14 1 1E8559-02050 GRIP, STAND 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 50. SWING CONTROL
Fig.50. SWING CONTROL (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-23150 NUT, ADJUST 1
2 1 1C730C-52060 LEVER ASSY, SWING 1
2-1 1 1C730C-52061 LEVER ASSY, SWING 1 N
(A=F000009)
3 1 1C730C-52200 GRIP, LEVER 1
4 1 1C730C-52280 HOLDER ASSY, LEVER 1
5 1 1C730C-52291 STOPPER, SWING LEVER 1
6 1 1C730C-52320 PIN, SNAP 8 1
7 1 1C730C-52320 PIN, SNAP 8 1
8 1 1C730C-52320 PIN, SNAP 8 4
9 1 1C729C-52410 PIPE ASSY,CONTROL 1
10 1 1C729C-52480 LINK,PLANTING 1
11 1 1C729C-52450 ROD,SWING CONTROL 1
12 1 1C730C-52510 SPRING,LEVER STOPPER 1
13 1 1C730C-52570 TURNBUCKLE 8X155 1
14 1 1C730C-63240 NUT,M8 L 1
15 1 22137-060000 WASHER 6, POLISHED 1
16 1 22137-080000 WASHER 8, POLISHED 3
17 1 22137-080000 WASHER 8, POLISHED 1
18 1 22417-160120 COTTER PIN 1.6X12 1
19 1 22487-080120 PIN 8X 12 2
20 1 22487-080600 PIN 8X 60 1
21 1 26716-080002 NUT M 8 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 51. MAIN CLUTCH LEVER
Fig.51. MAIN CLUTCH LEVER (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-47750 ROLLER, 6X22X10 1
2 1 1C730C-52000 LEVER ASSY, 1
3 1 1C730C-52370 PIN, SNAP 6 1
4 1 1C730C-52700 ARM,LEVER ASSY 1
5 1 1C729C-52710 COUNTER CMP 1
6 1 1C729C-52760 ROD,MAIN CLUTCH 1
7 1 1C729C-52900 SPRING,STAND 1
8 1 1C729C-52910 GUIDE,STAND SPRING 1
9 1 1E8559-51670 RUBBER 1
10 1 1C730C-65210 GRIP,CLUTCH LEVER 1
11 1 1C727C-65700 PIN, SNAP 10 1
12 1 22137-060000 WASHER 6, POLISHED 2
13 1 22351-060025 SPRING PIN 6X25 1
14 1 22417-200160 COTTER PIN 2.0X16 1
15 1 22487-100600 PIN, H10X60 2
16 1 1C730C-52400 BUSH, COLLAR 2
17 1 22417-200160 COTTER PIN 2.0X16 1
18 1 26016-060122 BOLT M 6X 12 1
19 1 22417-160120 COTTER PIN 1.6X12 1
20 1 22417-250200 COTTER PIN 2.5X20 1
21 1 1C729C-23050 BUSH, 10X12X15 1
22 1 1C730C-52690 COLLAR, 11X14X27 1
23 1 22157-060000 WASHER 6 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 52. SIDE CLUTCH LEVER
Fig.52. SIDE CLUTCH LEVER (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-52500 LEVER, SIDE CLUTCH L 1
2 1 1C729C-52550 LEVER, SIDE CLUTCH R 1
3 1 1C729C-52820 WIRE, ACCELERATOR 1
4 1 1C729C-52830 WIRE, SIDE CLUTCH 2
5 1 1C730C-52830 TUBE, SPIRAL 70 2
6 1 1E8559-84970 BAND 140 1
7 1 22137-060000 WASHER 6, POLISHED 2
8 1 22417-250160 COTTER PIN 2.5X16 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 53. PLANT CLUTCH LEVER
Fig.53. PLANT CLUTCH LEVER (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-23050 BUSH, 10X12X15 1
2 1 1C730C-30240 GRIP,CLUTCH LEVER 1
3 1 1C730C-47750 ROLLER, 6X22X10 1
4 1 1C730C-52370 PIN, SNAP 6 4
5 1 1C729C-52480 LINK,PLANTING 1
6 1 1C729C-52640 ARM, LEVER 1
7 1 1C729C-52890 ROD,PLANTING CONTROL 1
8 1 1C730C-53000 LEVER ASSY, 1
8-1 1 1C730C-53001 LEVER ASSY, 1 N
(A=F000009)
9 1 1C730C-53100 PIN,FLAT HEAD 10X118 2
10 1 1C727C-65700 PIN, SNAP 10 2
11 1 1C729C-53210 ROD,PLANTING CLUTCH 1
12 1 1C730C-53250 SPRING, 14X183 1
13 1 1E8559-51670 RUBBER 1
14 1 22137-060000 WASHER 6, POLISHED 4
15 1 22351-060025 SPRING PIN 6X25 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 54. PLANTING DEPTH LEVER
Fig.54. PLANTING DEPTH LEVER (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-51400 GRIP, LEVER 3
2 1 1C730C-52320 PIN, SNAP 8 3
3 1 1C730C-53210 LEVER,PLANTING DEPTH 3
4 1 1C730C-53260 SPRING, DEPTH LE VER 3
5 1 1C730C-53300 ARM, PLANTING DEPTH 3
6 1 1C727C-65700 PIN, SNAP 10 3
7 1 22487-080800 PIN, H8X80 3
8 1 22487-100300 PIN 10X 30 3

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 55. VERTICAL PICK ADJUST
Fig.55. VERTICAL PICK ADJUST (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1E8559-38980 KNOB 1
2 1 1C730C-54100 SHAFT, 1
3 1 1C730C-54170 ROD,PICKS ADJUST 1
4 1 1C730C-54200 ARM, PICKS LEVER 1
5 1 1C730C-54250 GUIDE, PICKS LEVER 1
6 1 1C730C-54300 LEVER, PICKS ADJUST 1
7 1 22117-100000 WASHER 10 1
8 1 22137-060000 WASHER 6, POLISHED 2
9 1 22272-000080 CIRCLIP E- 8 1
10 1 22417-200160 COTTER PIN 2.0X16 2
11 1 26014-060122 BOLT M 6X 12 2
12 1 26014-080202 BOLT M 8X 20 1
13 1 26476-060142 BOLT, M6X14 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 56. ENGINE CONTROL
Fig.56. ENGINE CONTROL (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-52830 TUBE, SPIRAL 70 1
2 1 1C729C-55200 WIRE,CHOKE 1
3 1 1C729C-55210 HARNESS, RECOIL 1
4 1 1C729C-77820 SPEED SWITCH 1
5 1 1E8559-84960 CABLE BAND 250 1
6 1 22137-100000 WASHER 10,POLISHED 1
7 1 26014-060162 BOLT M 6X 16 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 57. ENGINE RELATED
Fig.57. ENGINE RELATED (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-62010 PULLEY, ENGINE 1
2 1 1C729C-65010 STAY,MUFFLER 1
3 1 1C729C-65300 GUIDE,HARNESS 1
4 1 22137-080000 WASHER 8, POLISHED 4
5 1 26013-080162 BOLT W/WASHER M8X16 1
6 1 26014-080252 BOLT M 8X 25 1
7 1 26014-080202 BOLT M 8X 20 1
8 1 26051-080002 NUT M 8 4
9 1 1C730C-46290 WASHER, 9X30X3 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 58. ENGINE DRIVE
Fig.58. ENGINE DRIVE (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-22250 ROLLER,TENSION 35X21 1
2 1 1C729C-52990 NUT,6X15 1
3 1 1C729C-62050 V BELT, HP4 SA30 1
4 1 1C729C-62100 ARM,TENSION 1
5 1 1C730C-62130 SPRING,MAIN CLUTCH S 1
6 1 1C729C-62150 RETAINER ASSY, BELT 1
7 1 22137-100000 WASHER 10,POLISHED 1
8 1 22242-000120 CIRCLIP 12 1
9 1 22272-000080 CIRCLIP E- 8 1
10 1 26014-080162 BOLT M 8X 16 2
11 1 26979-060062 SCREW M 6X 6 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 59. HOOD
Fig.59. HOOD (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-63150 SPRING,BONNET 1
2 1 1C729C-63250 BONNET CMP 1
3 2 7C729C-63200 BONNET PL ASY 1
4 2 1C729C-63270 LAMP ASSY, HEAD 1
5 3 1C729C-63280 COVER,LENS 1
6 3 1C729C-63290 BODY 1
7 3 1C729C-63300 CORD 1
8 3 1C729C-63310 BULB 12V16W 1
9 2 1C729C-63320 SUPPORT,PLATE 1
10 2 22857-400161 SCREW M4X16,TAPPING 8
11 1 1C729C-63510 SUPPORT,BONNET 1
12 1 1C730C-64110 SUPPORT, ENGINE BASE 2
13 1 22137-060000 WASHER 6, POLISHED 1
14 1 26014-060162 BOLT M 6X 16 3
15 1 22857-600161 SCREW, 6.0 X 16 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 60. FUEL TANK
Fig.60. FUEL TANK (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-63020 TANK,FUEL 1
2 1 1C729C-63030 CAP,FUEL TANK 1
3 1 1C729C-63040 PACKING,FUEL TANK 1
4 1 1C729C-63050 FILTER,FUEL TANK 1
5 1 1C729C-63060 HOSE,7.3X180 1
6 1 1C729C-63920 STAY,TANK A 1
7 1 1C729C-63940 STAY,TANK B 1
8 1 26013-060162 BOLT M 6X 16 4
9 1 22157-060000 WASHER 6 3
10 1 26016-080182 BOLT 8X18 W/L.W. 2
11 1 23000-019000 CLAMP 19 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 61. BELT COVER
Fig.61. BELT COVER (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1F4124-44410 BOLT 6X10,WING 2
2 1 1C729C-62350 COVER,PULLEY 1
3 1 1C729C-62410 RETAINER,BELT 1
4 1 1C729C-62600 COVER, BELT 1
5 1 26014-080162 BOLT M 8X 16 1
6 1 26014-080202 BOLT M 8X 20 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 62. ENGINE BASE
Fig.62. ENGINE BASE (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-64000 BASE ASSY, ENGINE 1
2 1 1C729C-64090 BASE,ENGINE SUB CMP 1
3 1 1C730C-64120 BOLT, 10X171 2
4 1 1C729C-64200 BUMPER, 1
5 1 22217-100000 SPRING WASHER 10 2
6 1 26014-080202 BOLT M 8X 20 4
7 1 26051-100002 NUT M10 2
8 1 26476-080162 BOLT, M8X16 8

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 63. WIRE DRAWING MARKER
Fig.63. WIRE DRAWING MARKER (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-30240 GRIP,CLUTCH LEVER 2
2 1 1C727C-65700 PIN, SNAP 10 2
3 1 1C730C-81040 LEVER, MARKER 2
4 1 1C729C-81200 ROD,MARKER 607 2
5 1 1C729C-82600 MARKER,REAR (L 1
6 1 1C729C-82610 MARKER,REAR (R 1
7 1 1C729C-82620 ARM,MARKER L 1
8 1 1C729C-82630 ARM,MARKER R 1
9 1 1C729C-82650 SPRING,MARKER 2
10 1 22137-100000 WASHER 10,POLISHED 4

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 64. SEEDLING TRAY
Fig.64. SEEDLING TRAY (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-81410 TRAY, SEEDLING 4
2 1 26023-060122 SCREW, M6X12 8

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 65. SPARE SEEDLING TRAY
Fig.65. SPARE SEEDLING TRAY (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-81000 MARKER,CENTER 1
2 1 1C729C-82001 STAY,S.SEEDLING F 1
3 1 1C729C-82200 STAY,S.SEEDLING R 1
4 1 1C729C-82500 TRAY,SUB SEEDLING 1
5 1 1C727C-92530 MARKER, CENTER TOP 1
6 1 26014-060302 BOLT W/WASHER 6X 30 1
7 1 26014-080162 BOLT M 8X 16 4
8 1 26014-080202 BOLT M 8X 20 3
9 1 26014-080252 BOLT M 8X 25 1
10 1 26716-060002 NUT 6 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 66. LEVELER
Fig.66. LEVELER (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C730C-83100 SPRING, LEVELER 2
2 1 1C730C-83110 LEVELER, 2
3 1 1C730C-83120 FITTING, LEVELER 2
4 1 26014-060122 BOLT M 6X 12 4
5 1 26476-060162 BOLT, M6X16 4

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 67. LABEL
Fig.67. LABEL (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-85050 LABEL, CONTROL L 1
2 1 1C729C-85060 LABEL, CONTROL R 1
3 1 1C729C-85070 LABEL,ENGINE CONTROL 1
4 1 1C729C-85090 LABEL,MAIN CHANGE 1
5 1 1C729C-85130 LABEL,PTO CHANGE 1
6 1 1C729C-85260 LABEL,HORIZONTALFEED 1
7 1 1C729C-85300 LABEL, SEEDLING 1
8 1 1C729C-85320 LABEL, PLANTING QTY 1
9 1 1C729C-85330 MARK,ROPING PROHIBIT 4
10 1 1C729C-85350 LABEL,RECOIL CAUTION 1
11 1 1C729C-85410 LABEL,SYNCHRO CAUTIO 1
12 1 1C729C-85570 MARK, PLANTING DEPTH 3
13 1 1C7121-95330 LABEL, MAT RETAINER 1
14 1 1C730C-86050 MARK,BRAND 1
15 1 1C729C-85120 LABEL,YANMAR 1
16 1 1C729C-85030 LABEL, BONNET L 1
17 1 1C729C-85040 LABEL, BONNET R 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 68. LABEL(SAFETY
Fig.68. LABEL(SAFETY (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C729C-85080 LABEL,SAFETY ENG STP 1
2 1 1C729C-85100 LABEL,WARNING GAS 1
3 1 1C729C-85110 LABEL,CAUTION CLUTCH 1
4 1 1C729C-85140 LABEL,MACHINE USE 1
5 1 1C7121-95300 LABEL, DANGER CPQ 1
6 1 1C7110-95440 LABEL,CAUTION COVER 1
7 1 1C7110-95460 LABEL,WARNING PLANT 2

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 69. ACCESSORY
Fig.69. ACCESSORY (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 192010-09050 FUNNEL 1
2 1 1C730C-11400 PLUG, OIL FEED 2
3 1 1C729C-66990 TINE, N4-SHAPE L13 4
4 1 1C729C-86500 OPERATORS MANUAL AP4 1
5 1 1C729C-86510 PARTS CATALOG AP4 1
6 1 1C6052-88060 SCREWDRIVER,COMBINAT 1
7 1 1C7121-96100 SPANNER, BOX 21 1
8 1 1C7121-98100 BAG, TOOL S 1
9 1 1E8552-98130 OVERALLS 1
10 1 1C6410-98630 OIL FEEDER 1
11 1 23061-120300 PIPE 12X 300 1
12 1 28110-080100 WRENCH 8X10 1
13 1 28110-100120 WRENCH 10X12 1
14 1 28110-120140 WRENCH 12X14 1
15 1 1C729C-44050 ROLLER, SUPPORT 2
16 1 1C730C-44100 SHOE,SEEDLING BEARER 4
17 1 1C730C-44350 REINFORCEMNT, L 2
18 1 1C730C-44360 REINFORCEMNT, R 2
19 1 1C729C-86520 ENGINEOIL 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 70. ACCESSORY(TINE CAGE
Fig.70. ACCESSORY(TINE CAGE (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C7100-96090 GAUGE,TINE SET 1

(C)Copy Rights YANMAR CO.,LTD.

0CNP5-G34500 0CNP5-G34500 71. ACCESSORY(PLATE, SEEDLING PICK
Fig.71. ACCESSORY(PLATE, SEEDLING PICK (A)=AP4
(B)=
(D)=
(E)=
(C)= (F)=
REF. LEV. PARTS NO. DESCRIPTION Q'TY I R
(A) (B) (C) (D) (E) (F)
1 1 1C6900-96400 PICKER,SEEDLING 1

(C)Copy Rights YANMAR CO.,LTD.

 Part Number Index
All parts are stipulated in the order of part numbers.
(Depending on the area in which the part is used.)
This index will display the location of the part according to each part number.
MODEL : AP4
PC NO : 0CNP5-G34500
PARTS No. INDEX
PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No.
192010-09050 69 1 1C729C-19050 5 7 1C729C-63030 60 2 1C729C-85570 67 12
1C6052-88060 69 6 1C729C-21010 12 1 1C729C-63040 60 3 1C729C-86500 69 4
1C6054-31590 27 1 1C729C-22050 13 1 1C729C-63050 60 4 1C729C-86510 69 5
37 2 1C729C-22100 14 2 1C729C-63060 60 5 1C729C-86520 69 19
1C6054-32350 37 3 1C729C-22150 14 4 1C729C-63250 59 2 1C730C-11010 1 1
38 1 1C729C-22400 15 2 1C729C-63270 59 4 1C730C-11050 1 2
1C6220-13350 11 4 1C729C-23050 51 21 1C729C-63280 59 5 1C730C-11070 1 3
6 53 1 1C729C-63290 59 6 23 1
1C6280-31310 31 1 1C729C-23260 18 1 1C729C-63300 59 7 2
1C6290-32090 36 1 1C729C-31010 22 1 1C729C-63310 59 8 1C730C-11400 1 4
1C6301-43580 43 15 1C729C-31150 22 2 1C729C-63320 59 9 69 2
1C6410-98630 69 10 1C729C-32401 28 1 1C729C-63510 59 11 1C730C-11450 11 1
1C6550-31620 25 3 1C729C-44050 17 9 1C729C-63920 60 6 1C730C-11470 37 1
1C6550-31700 24 2 45 5 1C729C-63940 60 7 1C730C-12000 2 1
1C6550-32600 34 3 69 15 1C729C-64000 62 1 1C730C-12030 2 2
35 4 1C729C-51010 47 1 1C729C-64090 62 2 1C730C-12060 2 4
1C6557-43160 44 3 1C729C-51350 47 2 1C729C-64200 62 4 1C730C-12070 2 5
1C6560-66900 37 21 1C729C-51500 48 1 1C729C-65010 57 2 1C730C-12080 2 6
1C6560-66910 37 22 1C729C-51600 48 2 1C729C-65300 57 3 1C730C-12110 2 7
1C6670-83220 44 7 1C729C-52010 49 1 1C729C-66990 39 2 1C730C-12120 2 8
1C6900-96400 71 1 1C729C-52160 49 2 69 3 1C730C-12130 2 9
1C7100-96090 70 1 1C729C-52250 49 3 1C729C-77820 56 4 1C730C-12140 2 10
1C7110-95440 68 6 1C729C-52300 49 4 1C729C-81000 65 1 1C730C-12250 2 12
1C7110-95460 68 7 1C729C-52310 49 6 1C729C-81200 63 4 5 1
1C7121-95300 68 5 1C729C-52410 50 9 1C729C-82001 65 2 1C730C-12670 43 1
1C7121-95330 67 13 1C729C-52450 50 11 1C729C-82200 65 3 1C730C-13000 4 1
1C7121-96100 69 7 1C729C-52480 50 10 1C729C-82500 65 4 1C730C-13040 4 3
1C7121-98100 69 8 53 5 1C729C-82600 63 5 1C730C-13060 4 4
1C726C-34380 39 1 1C729C-52500 52 1 1C729C-82610 63 6 1C730C-13070 4 5
1C726C-66790 37 18 1C729C-52550 52 2 1C729C-82620 63 7 1C730C-13190 11 2
1C726C-66810 37 19 1C729C-52640 53 6 1C729C-82630 63 8 1C730C-13240 5 2
1C727C-65700 19 11 1C729C-52710 51 5 1C729C-82650 63 9 1C730C-13300 5 3
21 14 1C729C-52760 51 6 1C729C-85030 67 16 1C730C-13350 5 5
51 11 1C729C-52820 52 3 1C729C-85040 67 17 1C730C-14070 7 2
53 10 1C729C-52830 52 4 1C729C-85050 67 1 1C730C-14080 7 3
54 6 1C729C-52890 53 7 1C729C-85060 67 2 1C730C-14120 7 4
63 2 1C729C-52900 51 7 1C729C-85070 67 3 1C730C-14210 6 1
1C727C-92530 65 5 1C729C-52910 51 8 1C729C-85080 68 1 26 1
1C729C-12050 2 3 1C729C-52990 58 2 1C729C-85090 67 4 1C730C-14300 8 1
1C729C-12150 2 11 1C729C-53210 53 11 1C729C-85100 68 2 1C730C-14400 8 2
1C729C-12200 3 1 1C729C-55200 56 2 1C729C-85110 68 3 1C730C-15030 9 2
1C729C-12230 3 2 1C729C-55210 56 3 1C729C-85120 67 15 1C730C-15050 9 3
1C729C-13030 4 2 1C729C-62010 57 1 1C729C-85130 67 5 1C730C-15130 9 5
1C729C-13320 5 4 1C729C-62050 58 3 1C729C-85140 68 4 1C730C-15210 9 6
1C729C-13360 5 6 1C729C-62100 58 4 1C729C-85260 67 6 1C730C-15250 9 7
1C729C-14300 7 1 1C729C-62150 58 6 1C729C-85300 67 7 1C730C-15290 9 8
1C729C-15000 9 1 1C729C-62350 61 2 1C729C-85320 67 8 1C730C-15300 9 9
1C729C-15100 9 4 1C729C-62410 61 3 1C729C-85330 67 9 1C730C-15350 10 1
1C729C-16050 11 3 1C729C-62600 61 4 1C729C-85350 67 10 1C730C-15370 9 10
1C729C-16060 11 5 1C729C-63020 60 1 1C729C-85410 67 11 1C730C-15450 10 2

-1-
MODEL : AP4
PC NO : 0CNP5-G34500
PARTS No. INDEX
PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No.
1C730C-15500 10 3 1C730C-31200 23 3 1C730C-36901 37 12 1C730C-47380 19 10
1C730C-15750 9 11 1C730C-31250 23 4 1C730C-36910 38 4 1C730C-47660 44 5
12 1C730C-31290 23 5 1C730C-36940 37 13 1C730C-47750 51 1
1C730C-16240 11 7 1C730C-31310 23 7 1C730C-39210 37 14 53 3
1C730C-21150 12 2 1C730C-31340 23 8 1C730C-41320 23 15 1C730C-48150 23 16
1C730C-22030 14 1 1C730C-31350 23 9 1C730C-42090 43 2 1C730C-51400 54 1
1C730C-22050 13 2 1C730C-31360 23 10 1C730C-42100 41 1 1C730C-51410 47 3
1C730C-22060 13 3 1C730C-31390 23 11 1C730C-42150 41 2 1C730C-52000 51 2
1C730C-22120 14 3 1C730C-31400 23 12 1C730C-42200 41 3 1C730C-52060 50 2
1C730C-22140 13 4 1C730C-31500 24 1 1C730C-42210 41 4 1C730C-52061 50 2 -1
1C730C-22200 13 5 1C730C-31570 23 13 1C730C-42250 41 5 1C730C-52200 50 3
1C730C-22240 13 6 1C730C-31580 23 14 1C730C-42300 41 6 1C730C-52280 50 4
1C730C-22250 58 1 1C730C-31600 25 1 1C730C-42330 42 1 1C730C-52291 50 5
1C730C-22300 15 1 1C730C-31610 25 2 1C730C-42340 42 2 1C730C-52300 49 5
1C730C-22400 16 1 1C730C-31630 25 4 1C730C-42350 41 7 1C730C-52320 12 3
1C730C-22500 16 2 1C730C-32010 26 2 1C730C-42550 41 8 17 10
1C730C-22510 16 3 1C730C-32050 27 2 1C730C-42790 40 2 11
1C730C-22520 16 4 1C730C-32250 34 1 1C730C-43000 43 3 20 4
1C730C-22530 16 5 35 1 1C730C-43010 44 1 21 10
1C730C-22600 16 6 1C730C-32260 35 2 1C730C-43050 43 4 11
1C730C-23010 17 1 1C730C-32270 36 2 1C730C-43060 43 5 50 6
1C730C-23100 17 2 1C730C-32300 36 3 1C730C-43080 43 6 7
1C730C-23150 50 1 1C730C-32450 29 1 1C730C-43100 44 2 8
1C730C-23200 17 3 1C730C-32500 34 2 1C730C-43120 43 7 54 2
1C730C-23220 17 4 1C730C-32550 35 3 1C730C-43150 43 8 1C730C-52370 51 3
1C730C-23230 17 5 1C730C-32560 29 2 1C730C-43160 43 9 53 4
1C730C-23260 17 6 1C730C-32561 29 2 -1 1C730C-43180 43 10 1C730C-52400 17 12
1C730C-23270 17 7 1C730C-32610 29 3 1C730C-43200 43 11 44 6
1C730C-23300 17 8 1C730C-33050 30 2 1C730C-43210 43 12 51 16
1C730C-23400 18 2 1C730C-33100 30 3 1C730C-43480 45 1 1C730C-52510 50 12
1C730C-24010 19 1 1C730C-33300 32 1 1C730C-43500 45 2 1C730C-52570 50 13
1C730C-24050 19 2 1C730C-34130 30 4 1C730C-43510 19 8 1C730C-52600 49 7
1C730C-24110 19 3 1C730C-34200 37 4 1C730C-43550 43 13 1C730C-52690 51 22
1C730C-24120 19 4 1C730C-34460 38 2 1C730C-43560 43 14 1C730C-52700 51 4
1C730C-24200 19 5 1C730C-35060 30 5 1C730C-43600 43 16 1C730C-52830 15 3
1C730C-24300 19 6 1C730C-35070 30 6 1C730C-43610 44 4 4
1C730C-24410 19 7 1C730C-35150 31 2 1C730C-44010 45 3 52 5
1C730C-26050 20 1 1C730C-35160 31 3 1C730C-44020 45 4 56 1
1C730C-26100 21 1 1C730C-35300 32 2 1C730C-44100 40 3 1C730C-53000 53 8
1C730C-26110 21 2 1C730C-35350 33 1 69 16 1C730C-53001 53 8 -1
1C730C-26200 20 2 1C730C-35360 33 2 1C730C-44350 46 2 1C730C-53100 53 9
21 3 1C730C-35640 21 9 69 17 1C730C-53210 54 3
1C730C-26250 20 3 1C730C-36030 37 5 1C730C-44360 46 3 1C730C-53250 53 12
21 4 1C730C-36040 37 6 69 18 1C730C-53260 54 4
1C730C-26310 21 5 1C730C-36050 37 7 1C730C-44500 46 1 1C730C-53300 54 5
1C730C-26350 21 6 1C730C-36070 37 8 1C730C-44510 46 4 1C730C-54100 55 2
1C730C-26800 21 7 1C730C-36080 37 9 1C730C-44600 45 6 1C730C-54170 55 3
1C730C-26810 21 8 1C730C-36280 37 10 1C730C-44760 36 4 1C730C-54200 55 4
1C730C-30240 53 2 38 3 1C730C-46290 19 9 1C730C-54250 55 5
63 1 1C730C-36300 37 11 57 9 1C730C-54300 55 6

-2-
MODEL : AP4
PC NO : 0CNP5-G34500
PARTS No. INDEX
PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No.
1C730C-54400 43 17 7C729C-63200 59 3
1C730C-62130 58 5
1C730C-62160 20 5
21 12
13
1C730C-63150 59 1
1C730C-63200 47 5
1C730C-63240 50 14
1C730C-64110 59 12
1C730C-64120 62 3
1C730C-65210 51 10
1C730C-66250 37 15
1C730C-66260 37 16
1C730C-66320 37 17
1C730C-66890 37 20
1C730C-67030 13 7
1C730C-71850 29 4
1C730C-73270 43 18
1C730C-73350 20 6
21 15
1C730C-81040 63 3
1C730C-81410 64 1
1C730C-83100 66 1
1C730C-83110 66 2
1C730C-83120 66 3
1C730C-83500 43 19
1C730C-83510 43 20
1C730C-83900 43 21
1C730C-86050 67 14
1C730C-95590 37 23
1E4060-74090 27 3
1E4370-24010 30 1
1E8552-98130 69 9
1E8559-02050 49 14
1E8559-38980 55 1
1E8559-51670 51 9
53 13
1E8559-82820 23 18
1E8559-84960 47 6
7
56 5
1E8559-84970 15 5
52 6
1F4124-44410 61 1
1S6000-61220 23 17
28 3
35 5
7C729C-31300 23 6
7C729C-41000 40 1
7C729C-51400 47 4

-3-