Vacuum cleaner

FC9160
/A

Philips Domestic Appliances and Personal Care

Service Manual
PRODUCT INFORMATION ACCESSORIES
- This product meets the requirements regarding - Nozzle : Tri-Active all purpose nozzle
interference suppression on radio and TV. - Tubes : Metal lacquered 3-piece telescopic tube
- After the product has been repaired, it should function - Accessories : Brush, crevice nozzle and small nozzle
properly and has to meet the safety requirements as - Accessory storage : Active accessory storage bridge in
officially laid down at this moment. handgrip
- Coupling : Button coupling
TECHNICAL INFORMATION
- Colour : Slate Grey OPTIONAL (accessories)
- Power consumption : 2000 W - FC 8021 : S-bag Classic
(IEC) 230V
- FC 8022 : S-bag Clinic
- Maximum Air displacement : 47 l/s
- FC 8023 : S-bag Anti-Odour
- Vacuum : 340 mbar / 34.0 kPa
- FC 8024 : S-bag Long Performance
- Type number dustbag : FC8021
- FC 8030 : Super Clean Air filter, High-Flow
- Duststorage capacity : 4L AFS exhaust filter
- Cord length : 9m - FC 8031 : Super Clean Air HEPA filter,
- Fiter system : Double layered HEPA12 exhaust filter
compatible s-bag™
: 3 layer permanent motor
protection filter
: Ultra Clean Air HEPA13
exhaust filter
- Dimensions of cleaner : 472 x 324 x 276 mm
- Dimensions of packaging : 593 x 393 x 296 mm
- Net weight : 6.3 kg

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

06/06
 FC9160 /A
DISASSEMBLY- AND RE-ASSEMBLY ADVISE REPAIR INSTRUCTION
- Open the appliance, first remove the filter cover (item 22) - Cotton dustbags, are used in countries in which paper
and then remove the 2 screws (A) of the button assy dustbags are not available.
(item 10). - If the reel half spring unit is replaced, shaft G must be
- The button assy can be removed by lifting up the back of lubricated with silicone grease. Do not apply any silicone
the assy and then pull the assy out of the appliance. grease to or spill any grease on terminals (37) or conductors
- When the dustcover and the handle have been removed, the (36).
electronics, DBFI valve assy, CW-lever and the switch lever - The cord winder spring must be tensioned to the maximum
can be removed. level and then be rewound approx. 1.5 turn.
- The dustchamber and the backpanel can be removed from - Item 14, air valve, opens to cool the motor if the air
the appliance by removing 15 screws (B and C). displacement is too low or if the airflow is blocked.
- You will require a screwdriver with a 14.5 cm long shrank - If the function of the electronic control unit is not required,
for this. Screwdriver 4322 009 08490 for T15 can be used. the Triac must be short-circuited in the manner shown in
- When the cordwinder has been taken out, the final screw the circuit diagram.
(D) for releasing the lower front from the appliance can be - When the vacuum cleaner is used to suck up fine dust the
removed. pores of the dustbag may become clogged, causing the
- When the repair is finished, check whether all functions of passage of air through the dustbag to become obstructed.
the appliance work properly. As a result, the dustbag-full indicator will indicate that the
- To disassemble the cordwinder, use TORX screwdriver no. dustbag needs to be replaced, eventhough the dustbag is not
T10, which is one of a set consisting of T20; T15; T10; T9; full at all.
T8; T7 and T6 (code number 4822 395 505145).

ELECTRICAL DIAGRAM

CORD WINDER
Blue

Brown

Black

Short-circuit
S hort-circuit
ort-circu t
M Ti c
Triac
Black/White

MOTOR
POWER
MODULE

2-7
PARTS LIST
FC9160 /A

Pos Service code Description Pos Service code Description

1 4322 005 19970 Dustcover / Pr / Slate Grey 26 4322 003 25460 S-Class H-sealing
2 4322 005 17600 Dustcover lock assy 27 4322 000 38670 Silencer 1 wall
3 4322 000 67810 DB detector spring 28 4322 000 38770 Silencer 2 bottom
4 4322 003 24790 DB detector / LB / Cool grey 29 4322 003 23880 Motorhousing top inside
5 4322 003 24780 CCC (DB holder) 30 4322 001 73400 Bufferring front ANS-Atlas
6 4322 000 37300 Triple inletfilter 31 4322 006 97940 Motor Domel 1761 220 - 240 V
7 4322 003 23820 Inlet grille 32 4322 000 38820 Silencer 3 compas
8 4322 003 24650 Dustchamber / Black 33 4322 001 73520 Motor buffer back green
9 4322 009 09560 Handle performer / Slate Grey 34 4322 003 23870 Motor housing bottom ANS
10 4322 009 09600 Button panel assy / Pr / Slate Grey 35 4322 009 09440 Reel half spring unit (L = 9 m)
11 4322 003 24810 Cord winder lever 36 4322 009 09450 Reel half contact unit
12 4322 003 27910 Control wheel / Select Grey 37 4322 009 09460 Contact ring plate
13 4322 006 22750 PCB assy 220-240 V 50/60 Hz 38 4322 006 07410 U.K. / H.K. L = 9.3 m
14 4322 005 20580 DBFI/Valve assy / Sp.v. 39 4322 006 07390 Euro 4.8 mm pins L = 9.3 m
15 4341 003 02390 Switch lever 40 4322 003 18850 C. Bend B1
16 4322 003 24620 Back panel / Black 41 4322 005 12760 LC Swivel assy
17 4322 003 24720 Cord outlet / Black 42 4322 005 20290 C. Bend B1 / Hose / Swivel assy /
18 4322 003 24600 Lower / LB / Back Silver Steel
19 4322 003 27850 Lower front / Slate grey 42a 4322 004 23360 Hose assy / Silver Steel
20 4322 005 17010 Caster assy / Select grey 43 4322 007 16000 Leaf spring assy
21 4322 003 24690 Filter cover lock / Select grey 44 4322 004 23340 3-Piece telescopic tube assy
22 4322 003 20030 Filter cover / Slate grey 45 4322 001 99120 Coupling bush
23 4322 004 92990 Filter HEPA 13 46 4322 007 45550 Coupling spring
24 4322 001 73460 Exhaust sealing 47 4322 004 22570 Plumeau assy
25 4322 000 38790 Silencer 4 wall backpanel 48 4322 003 18870 Crevicle nozzle
49 4322 005 12530 Accessory bridge assy
50 4322 004 22560 Small nozzle
51 4322 004 23260 Tri-active nozzle
52 4322 003 26030 Motor bracket

3-7
EXPLODED VIEW
FC9160 /A

2 9

10

11

12
5

13
Y Black/
White
Black

Z blue
brown

14
B 15
B
6
7

B
B

4-7
EXPLODED VIEW
FC9160 /A

21

C 22

16 C 23
C
C 24
C
C
C

C
25

26
17

27

18
28
D

19

20

5-7
EXPLODED VIEW
FC9160 /A

29

30

31

Black/
White

Black
Y

32

52
33
34
35

36
F
G

38 + 39 E
E
blue Z E
brown

37 F
F
6-7
EXPLODED VIEW
FC9160 /A
U.K. / H.K. 38 Swiss

Europe Ø 4.8mm 39 Italy

42

40 42a 41

44

47 49

48 50
43

45

46

51

7-7