Sikatop - 122: Fibre Reinforce, Polymer Modified Repair Mortar

Product Data Sheet
Edition No. 03 (October 2015)

®
SikaTop -122
®
SikaTop -122
Fibre Reinforce, Polymer Modified Repair Mortar
Product Two-component, cement based polymer modified, repair mortar with added
Construction
Description polyamide fibres, to form a high strength repair and levelling mortar for concrete.
Use As an economical and easy to use concrete repair mortar, suitable for:
■ Bridges
■ Water Retaining structures
■ Making good damaged edges and joint arises
■ Repairing honeycombing
■ Concrete repair in general
Advantages ■ Easy to mix and apply
■ Excellent adhesion
■ Good mechanical strength
■ Good water and oil resistance
■ Increase resistance to salt water, chlorides and carbonation
■ Non toxic and non flammable
■ High abrasion resistance
2
Coverage 2.2 kg/m per mm thickness
Technical Data
Form A: Liquid B: Powder
Color Concrete Grey
Mixing Ratio Comp. A:B = 1: 6.3 by weight
Mixing Density Approx. 2.2 kg/ltr
o
Pot life 30 C 25 minutes
2
Flexural Strength 28 days ~ 13 N/ mm (ASTM C-348)
2
Bond Strength to 28 days ≥ 1.5 N/ mm (concrete failure)
concrete
2
Compressive Strength 1 day ~ 15 N/ mm (ASTM C-109)
2
3 days ~ 35 N/ mm
2
7 days ~ 40 N/ mm
2
28 days ~ 52 N/ mm
SikaTop®-122 1/2
Shelf life 9 months when unopened
Storage Dry, cool, shaded place
Packaging 30 kg set
Instruction For Use

Surface Preparation Removed all deteriorated concrete, dirt, oil, grease and all bond-inhibiting.
Preparation work should be done by scabbler or other appropriate mechanical
means to obtain an aggregate-fractured surface.
Substrate should be saturated surface dry (SSD) with no standing water during
application.
Mixing Pour approximately 4/5 of Component ‘A’ into mixing container. Add Component ‘B’
while continuing to mix. Mix to a uniform consistency, for 3 minutes. Add remaining
Component ‘A’ to mix if greater consistency desired. Use a mechanically powered
low speed drill (400 – 600 rpm) with mixing paddle or appropriate sized mortar
mixer.
Construction
Application Apply with spatula or trowel to required profile

®
For large repairs use SikaTop -121 as bond –coat.
Curing Use approved curing methods, like Antisol curing compound etc.
Limitations Maximum thickness per application : 20 mm
Variation in cement could cause shade differences in colour of the mortar.
Handling ■ Avoid contact with skin and eyes

Precautions: ■ Wear protective gloves and eye protection during work
■ If skin contact occurs, wash skin thoroughly
■ If in eyes, hold eyes open, flood with warm water and seek medical attention
without delay.
Legal Notes The information, and, in particular, the recommendations relating to the
application and end-use of Sika products, are given in good faith based on Sika’s
current knowledge and experience of the product when properly stored, handled
and applied under normal conditions in accordances with Sika’s recommendations.
In practice, the differences in materials, substrates and actual site conditions are
such that no warranty in respect of merchantability or of fitness for a particular
purpose, nor any liability arising out of any legal relationship whatsoever, can be
inferred either from this information, or from any written recommendations, or from
any other advice offered. The user of the product must test the product’s suitability
for the intended application and purpose. Sika reserves the right to change the
properties of its products. The proprietary rights of third parties must be observed.
All orders are accepted subject to our current terms of sale and delivery. Users
must always refer to the most recent issue of the local Product Data Sheet for the
product concerned, copies of which will be supplied on request.
Sika Philippines, Inc.

888 Unit A & B,
Marcos Alvarez Ave., Talon V, Tel. No.: +(632) 806-2875
Las Piñas City 1747 Fax No.: +(632) 806-2883
Philippines Website: phl.sika.com
SikaTop®-122 2/2

Sikatop - 122: Fibre Reinforce, Polymer Modified Repair Mortar

Uploaded by

Copyright:

Available Formats

Sikatop - 122: Fibre Reinforce, Polymer Modified Repair Mortar

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sikatop - 122: Fibre Reinforce, Polymer Modified Repair Mortar

Uploaded by

Copyright:

Available Formats

Product Data Sheet

Edition No. 03 (October 2015)

Instruction For Use

Application Apply with spatula or trowel to required profile

Handling ■ Avoid contact with skin and eyes

Sika Philippines, Inc.

You might also like