Gu - dc3013 - E03 - 1 Ur16 Gu SDR Dimension (v4.16)
Gu - dc3013 - E03 - 1 Ur16 Gu SDR Dimension (v4.16)
Gu - dc3013 - E03 - 1 Ur16 Gu SDR Dimension (v4.16)
Contents
2
ZTE GU SDR-Based BTS Family
Outdoor mini Outdoor micro Multi-Mode Supported
ZXSDR BS8908 ZXSDR BS8906 GSM/UMTS/HSPA
HSPA+/LTE
RSU40
RSU60E Indoor macro
ZXSDR BS8800 Multi-Band Supported
Radio Unit
G/U900M, G/U1800M
U/L2100M, U/L2600M
Baseband unit
Long term TCO Saving
RSU40
B8200 RSU40 50% HPA technology
RSU60E RSU60E
Smart carrier On/Off
Outdoor macro RSU82 RSU82
ZXSDR BS8900 3 sectors in 1 RRU
Modularized PM FS High
Fan
Design BP
CC Reliability
SA
GSM/UMTS/LTE share the main boards such as control boards and interface
boards.
Configure the baseband board according to the capacity of GSM/UMTS/LTE.
© ZTE All rights reserved 4
GUL
Control & Clock Board (CC2/CC16/CCE1)
Main functions
GPS system clock & RF reference
clock
Abis/Iub/S1/X2 interface protocol
processing
System management and O&M
GSM:UBPG/UBPG2/UBPG3
BPK_e1, BPK_e and BPK_d are all UMTS baseband processing boards, processing the physical
layer protocol and frame protocol specified by 3GPP
Notes
The above table describes the maximum hardware capability. The actual capability is up to
the licenses configured.
GSM 72 TRXs
FS is fabric switch board which provides the optical interface between BBU and
RRU and processes the IQ signal. At least 1 board is configured by default for
GSM/UMTS dual-mode. FS is optional in LTE single mode configuration.
SE
Interface
Description
Name
8 E1/T1 interfaces,1 RS485,1RS232 interface,
- 6+2 dry contacts ( 6 input interfaces, 2 input&output
interfaces )
TAM is used for tower mounted amplifier control when TMA (Tower Mounted Amplifier) is
needed.
Power Module
16 internal interfaces for +12V load power
16 internal interfaces for +3.3V management power
Measurement and protection of inputing over-
voltage/under-voltage
Output over-current protection and load power
management
When configured BPN2 is 4 and 5, number is 2.
When configured BPN2 is 1 or 2 or 3, number is 1.
© ZTE All rights reserved 13
GU
B8200 Configuration Principles
1T2R 3 TX RX
RXin
2
Capacity: RXout 4 DBG
4 carriers
5 MON
Output Power:
6 AISG
60W
Physical Index
Physical Index
Interface Index
Volume: 482 mm*88 mm*360 mm (H*W*D)
2*1.25Gbps CPRI optical interfaces
Weight: 13 kg
2*Antenna interfaces
1 AISG interface Volume: 482 mm*88 mm*360 mm (H*W*D)
1 Frequency extension interface Weight: 13 kg
Capacity:
3 TX RX
6TRXs/4Cs/4TRXs+1C/2TRXs+2Cs RXin
2
RXout 4 DBG
Output Power:
80W 5 MON
Receiving Sensitivity:
6 AISG
GSM : -113.5dBm@single antenna
7 Power
UMTS: -129.1dBm@dual antennas
Frequency band:
850M/900M/180M0/1900M
MCPA based, high PA efficiency
Capacity:
2 TX RX
2*6TRXs/2*4Cs/1Cell/2*(1Cs+4TRXs)/2*
Frequency Bands
Physical Index
Volume : 422 mm × 218 mm × 133 mm (H × W × D)
12 L Volume
Weight: 15 kg
Output Power:
DD: 2×40 W
Physical Index
Volume: 415 mm × 296 mm × 165 mm (H*W*D)
Weight: 23 kg
Performance Index
Antenna ports : 2T4R
Physical Index
Volume: 415 mm × 296 mm × 152 mm (H*W*D)
Weight: 22 kg
Performance Index
Antenna ports : 4T4R
Physical Index
Volume 415 mm x 296 mm x 104 mm (H*W*D)
Weight: 15 kg
Capacity
Receiving sensitivity
BB
CPRI
FS RRU …
Radio Unit
Radio Unit
E1
SA/ Fiber
STM-1 SE/
CC
NIS
GE/FE
Control Signaling
Clock
Data
R8861
+ RRU
R8862A
R8854
B8200 R8892
R8863
BS8700 contains two separated modules: baseband unit and remote radio unit.
BS8800 main cabinet supports 6 RSU, when the requirement of RSU exceeds 6, an
auxiliary cabinet can be added for expansion. Totally BS8800 can support 60 GSM
TRX/24 UMTS CS with sub cabinet. In addition, the multi-mode station can be
deployed in this way to saves the area. Radio unit includes RSU40, RSU60E and
RSU82. The cabinet frame of ZXSDR BS8800 is shown in following Figure:
BS8900A
ZXSDR BS8900A is an outdoor macro base station, supporting GSM/UMTS/LTE
mode. Configuration principle of radio unit is as the same as those of BS8800, and
the configuration principle of base-band unit refer to chapter 2.1.
BS8900A has four kinds of cabinets, including BC8910A, RC8910A, PC8910A, and
BC8910A Auxiliary. These cabinets can combine together flexibly according to the
actual needs. Cabinet frame of ZXSDR BS8900A are shown in following Figure:
Base SA 1 1
band
Unit
FS 2 1
CC 1 1
UBPG3 1 0
BPN2 0 2
BPK_d 1 0
Radio RSU60E-900M 3 3
Unit
RSU60E-1800M 3 0
RSU82-1800M 0 3
RSU82-2100M 3 0
ZXSDR BS8906 is the GSM/UMTS outdoor micro base station. With all IP Micro-
TCA architecture and high integration, BS8906 meets outdoor Omni site and
outdoor BBU installation requirements.
Each BS8906 supports RSU40, RSU60E and RSU82. When slotted with RSU82,
RSU82 has 2*20W output power in maximum restricted by software.
Also BS8906 supports external RRU, including R8861 and R8882
RSU40/RSU
B820 60E/RSU82
0
UMTS CE 0 384
UMTS MIMO No No
SA 1 1
FS 0 1
Base
band CC 1 1
Unit
UBPG3 1 0
BPK 0 1
RSU60E-900M 1 0
Radio
Unit R8882-2100M 0 1
Single BS8908 unit is shown in the following figure, and the TOC is 40W. BS8908
is working on 900M and 1800M in GSM mode, supporting both AC (220 V/110 V)
and DC (-48 V) power supply. One BS8908 supports up to 6 TRXs, and it can also
be expanded to S4/4/4 by cascading with R8861
41
Dimensioning Principle for GSM
Dual-mode License RU or GL
44
Dimensioning Principle for UMTS
Cell
Number
Channel Data
Elements Throug
Number hput
50
License Dimension Example
UMTS code 15 15
LTE Connected User 1200 1200
LTE Bandwidth 10M 10M
LTE UL Throughput 50Mbps 50Mbps
LTE DL Throughput 100Mbps 100Mbps
Online
Service Type User UL DL
32
AMR 12.2 kbps 1 1
2
CS64 kbps 2 2
R99
15 4
PS128 kbps 4
5
PS384 kbps 8 8
5
SF16 52.2~70.8 kbps 2
HSUPA
5
1*SF4 169.8~711 kbps 8